linux-omap2 git: add LED and NAND drivers

4 files changed, 636 insertions, 9 deletions

diff --git a/packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch b/packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch
new file mode 100644
index 0000000000..17329be29b
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch
@@ -0,0 +1,69 @@
+From 7a444ee080c5f1a62ac5042f1e7926622b3e1ce7 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@openembedded.org>
+Date: Fri, 30 May 2008 13:43:36 +0200
+Subject: [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
+
+omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
+ * on revision A5 and earlier board the two leds can't be controlled seperately, should be fixed in rev. B and C boards.
+
+Signed-off-by: Koen Kooi <koen@openembedded.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   28 ++++++++++++++++++++++++++++
+ 1 files changed, 28 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c992cc7..83891fc 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -19,6 +19,7 @@
+ #include <linux/err.h>
+ #include <linux/clk.h>
+ #include <linux/io.h>
++#include <linux/leds.h>
+ 
+ #include <asm/hardware.h>
+ #include <asm/mach-types.h>
+@@ -72,6 +73,32 @@ static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ 	.ctrl_name	= "internal",
+ };
+ 
++struct gpio_led gpio_leds[] = {
++	{
++		.name = "beagleboard::led0",
++		.default_trigger = "none",
++		.gpio = 149,
++	},
++	{
++		.name = "beagleboard::led1",
++		.default_trigger = "none",
++		.gpio = 150,
++	},
++};
++
++static struct gpio_led_platform_data gpio_led_info = {
++	.leds = gpio_leds,
++	.num_leds = ARRAY_SIZE(gpio_leds),
++};
++
++static struct platform_device leds_gpio = {
++	.name = "leds-gpio",
++	.id   = -1,
++	.dev  = {
++		.platform_data = &gpio_led_info,
++	},
++};
++
+ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+ 	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
+ 	{ OMAP_TAG_MMC,		&omap3beagle_mmc_config },
+@@ -83,6 +110,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
+ #ifdef CONFIG_RTC_DRV_TWL4030
+ 	&omap3_beagle_twl4030rtc_device,
+ #endif
++	&leds_gpio,
+ };
+ 
+ static void __init omap3_beagle_init(void)
+-- 
+1.5.4.3
+
diff --git a/packages/linux/linux-omap2-git/beagleboard/defconfig b/packages/linux/linux-omap2-git/beagleboard/defconfig
index ba27d9de98..15f1b47f2b 100644
--- a/packages/linux/linux-omap2-git/beagleboard/defconfig
+++ b/packages/linux/linux-omap2-git/beagleboard/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.26-rc4-omap1
-# Thu May 29 00:40:28 2008
+# Fri May 30 14:03:36 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,9 +179,7 @@ CONFIG_OMAP_BOOT_TAG=y
 CONFIG_OMAP_BOOT_REASON=y
 # CONFIG_OMAP_COMPONENT_VERSION is not set
 # CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
 # CONFIG_OMAP_MBOX_FWK is not set
@@ -192,7 +190,6 @@ CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
@@ -273,7 +270,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
+CONFIG_LEDS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -514,7 +511,7 @@ CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
+CONFIG_FTL=n
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
@@ -566,6 +563,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP2=y
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -1451,7 +1449,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_OMAP_DEBUG is not set
 # CONFIG_LEDS_OMAP is not set
 # CONFIG_LEDS_OMAP_PWM is not set
-CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO=y
 
 #
 # LED Triggers
diff --git a/packages/linux/linux-omap2-git/beagleboard/flash.patch b/packages/linux/linux-omap2-git/beagleboard/flash.patch
new file mode 100644
index 0000000000..4c76cd97bd
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/flash.patch
@@ -0,0 +1,558 @@
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index 13d0043..d582b8f 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -44,7 +44,8 @@ obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+ 					   board-omap3evm-flash.o
+ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
+ 					   usb-musb.o usb-ehci.o \
+-					   hsmmc.o
++					   hsmmc.o \
++					   board-omap3beagle-flash.o
+ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+ 					   hsmmc.o \
+ 					   usb-musb.o
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-flash.c b/arch/arm/mach-omap2/board-omap3beagle-flash.c
+new file mode 100644
+index 0000000..5346df0
+--- /dev/null
++++ b/arch/arm/mach-omap2/board-omap3beagle-flash.c
+@@ -0,0 +1,119 @@
++/*
++ * board-omap3beagle-flash.c
++ * 
++ * Copyright (c) 2008 Texas Instruments
++ *
++ * Modified from board-omap3evm-flash.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/nand.h>
++#include <linux/types.h>
++#include <linux/io.h>
++
++#include <asm/mach/flash.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpmc.h>
++#include <asm/arch/nand.h>
++
++#define GPMC_CS0_BASE  0x60
++#define GPMC_CS_SIZE   0x30
++
++static struct mtd_partition omap3beagle_nand_partitions[] = {
++	/* All the partition sizes are listed in terms of NAND block size */
++	{
++		.name		= "X-Loader",
++		.offset		= 0,
++		.size		= 4*(64 * 2048),	
++		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
++	},
++	{
++		.name		= "U-Boot",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
++		.size		= 15*(64 * 2048),
++		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
++	},
++	{
++		.name		= "U-Boot Env",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
++		.size		= 1*(64 * 2048),
++	},
++	{
++		.name		= "Kernel",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
++		.size		= 32*(64 * 2048),
++	},
++	{
++		.name		= "File System",
++		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
++		.size		= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct omap_nand_platform_data omap3beagle_nand_data = {
++	.parts		= omap3beagle_nand_partitions,
++	.nr_parts	= ARRAY_SIZE(omap3beagle_nand_partitions),
++	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
++	.nand_setup	= NULL,
++	.dev_ready	= NULL,
++};
++
++static struct resource omap3beagle_nand_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device omap3beagle_nand_device = {
++	.name		= "omap2-nand",
++	.id		= -1,
++	.dev		= {
++		.platform_data	= &omap3beagle_nand_data,
++	},
++	.num_resources	= 1,
++	.resource	= &omap3beagle_nand_resource,
++};
++
++
++void __init omap3beagle_flash_init(void)
++{
++	u8 cs = 0;
++	u8 nandcs = GPMC_CS_NUM + 1;
++
++	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
++
++	/* find out the chip-select on which NAND exists */
++	while (cs < GPMC_CS_NUM) {
++		u32 ret = 0;
++		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
++
++		if ((ret & 0xC00) == 0x800) {
++			printk(KERN_INFO "Found NAND on CS%d\n", cs);
++			if (nandcs > GPMC_CS_NUM)
++				nandcs = cs;
++		}
++		cs++;
++	}
++
++	if (nandcs > GPMC_CS_NUM) {
++		printk(KERN_INFO "NAND: Unable to find configuration "
++				 "in GPMC\n ");
++		return;
++	}
++
++	if (nandcs < GPMC_CS_NUM) {
++		omap3beagle_nand_data.cs = nandcs;
++		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add +
++			GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
++		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
++
++		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
++		if (platform_device_register(&omap3beagle_nand_device) < 0)
++			printk(KERN_ERR "Unable to register NAND device\n");
++	}
++}
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c992cc7..99e042e 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -94,6 +94,7 @@ static void __init omap3_beagle_init(void)
+ 	hsmmc_init();
+ 	usb_musb_init();
+ 	usb_ehci_init();
++	omap3beagle_flash_init();
+ }
+ 
+ arch_initcall(omap3_beagle_i2c_init);
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 3d5e432..02b9ced 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -71,7 +71,7 @@ config MTD_NAND_AMS_DELTA
+ 
+ config MTD_NAND_OMAP2
+ 	tristate "NAND Flash device on OMAP 2420H4/2430SDP boards"
+-	depends on (ARM && ARCH_OMAP2 && MTD_NAND)
++	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ 	help
+           Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms.
+ 
+diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
+index 3b7307c..3aac1d2 100644
+--- a/drivers/mtd/nand/omap2.c
++++ b/drivers/mtd/nand/omap2.c
+@@ -111,15 +111,6 @@
+ static const char *part_probes[] = { "cmdlinepart", NULL };
+ #endif
+ 
+-static int hw_ecc = 1;
+-
+-/* new oob placement block for use with hardware ecc generation */
+-static struct nand_ecclayout omap_hw_eccoob = {
+-	.eccbytes = 12,
+-	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+-	.oobfree = {{16, 32}, {33, 63} },
+-};
+-
+ struct omap_nand_info {
+ 	struct nand_hw_control		controller;
+ 	struct omap_nand_platform_data	*pdata;
+@@ -133,6 +124,13 @@ struct omap_nand_info {
+ 	void __iomem			*gpmc_cs_baseaddr;
+ 	void __iomem			*gpmc_baseaddr;
+ };
++
++/*
++ * omap_nand_wp - This function enable or disable the Write Protect feature on
++ * NAND device
++ * @mtd: MTD device structure
++ * @mode: WP ON/OFF
++ */
+ static void omap_nand_wp(struct mtd_info *mtd, int mode)
+ {
+ 	struct omap_nand_info *info = container_of(mtd,
+@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ }
+ 
+ /*
+-* omap_read_buf - read data from NAND controller into buffer
+-* @mtd: MTD device structure
+-* @buf: buffer to store date
+-* @len: number of bytes to read
+-*/
++ * omap_read_buf - read data from NAND controller into buffer
++ * @mtd: MTD device structure
++ * @buf: buffer to store date
++ * @len: number of bytes to read
++ */
+ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+ 	struct omap_nand_info *info = container_of(mtd,
+@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ }
+ 
+ /*
+-* omap_write_buf - write buffer to NAND controller
+-* @mtd: MTD device structure
+-* @buf: data buffer
+-* @len: number of bytes to write
+-*/
++ * omap_write_buf - write buffer to NAND controller
++ * @mtd: MTD device structure
++ * @buf: data buffer
++ * @len: number of bytes to write
++ */
+ static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len)
+ {
+ 	struct omap_nand_info *info = container_of(mtd,
+@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_MTD_NAND_OMAP_HWECC
++/*
++ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller
++ * @mtd: MTD device structure
++ */
+ static void omap_hwecc_init(struct mtd_info *mtd)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ 							mtd);
++	register struct nand_chip *chip = mtd->priv;
+ 	unsigned long val = 0x0;
+ 
+ 	/* Read from ECC Control Register */
+@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd)
+ 
+ 	/* Read from ECC Size Config Register */
+ 	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+-	/* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */
+-	val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F));
++	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
++	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
+ 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+-
+-
+ }
+ 
+ /*
+- * This function will generate true ECC value, which can be used
++ * gen_true_ecc - This function will generate true ECC value, which can be used
+  * when correcting data read from NAND flash memory core
++ * @ecc_buf: buffer to store ecc code
+  */
+ static void gen_true_ecc(u8 *ecc_buf)
+ {
+@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf)
+ }
+ 
+ /*
+- * This function compares two ECC's and indicates if there is an error.
+- * If the error can be corrected it will be corrected to the buffer
++ * omap_compare_ecc - This function compares two ECC's and indicates if there
++ * is an error. If the error can be corrected it will be corrected to the
++ * buffer
++ * @ecc_data1:  ecc code from nand spare area
++ * @ecc_data2:  ecc code from hardware register obtained from hardware ecc
++ * @page_data:  page data
+  */
+ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
+ 			    u8 *ecc_data2,	/* read from register */
+@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
+ 	}
+ }
+ 
++/*
++ * omap_correct_data - Compares the ecc read from nand spare area with ECC
++ * registers values and corrects one bit error if it has occured
++ * @mtd: MTD device structure
++ * @dat: page data
++ * @read_ecc: ecc read from nand flash
++ * @calc_ecc: ecc read from ECC registers
++ */
+ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
+ 				u_char * read_ecc, u_char * calc_ecc)
+ {
+@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
+ }
+ 
+ /*
+-** Generate non-inverted ECC bytes.
+-**
+-** Using noninverted ECC can be considered ugly since writing a blank
+-** page ie. padding will clear the ECC bytes. This is no problem as long
+-** nobody is trying to write data on the seemingly unused page.
+-**
+-** Reading an erased page will produce an ECC mismatch between
+-** generated and read ECC bytes that has to be dealt with separately.
+-*/
++ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
++ * Using noninverted ECC can be considered ugly since writing a blank
++ * page ie. padding will clear the ECC bytes. This is no problem as long
++ * nobody is trying to write data on the seemingly unused page. Reading
++ * an erased page will produce an ECC mismatch between generated and read
++ * ECC bytes that has to be dealt with separately.
++ * @mtd: MTD device structure
++ * @dat: The pointer to data on which ecc is computed
++ * @ecc_code: The ecc_code buffer
++ */
+ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ 				u_char *ecc_code)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ 							mtd);
+ 	unsigned long val = 0x0;
+-	unsigned long reg, n;
+-
+-	/* Ex NAND_ECC_HW12_2048 */
+-	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
+-		(info->nand.ecc.size  == 2048))
+-		n = 4;
+-	else
+-		n = 1;
++	unsigned long reg;
+ 
+ 	/* Start Reading from HW ECC1_Result = 0x200 */
+ 	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
+-	while (n--) {
+-		val = __raw_readl(reg);
+-		*ecc_code++ = val;		/* P128e, ..., P1e */
+-		*ecc_code++ = val >> 16;	/* P128o, ..., P1o */
+-		/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+-		*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+-		reg += 4;
+-	}
++	val = __raw_readl(reg);
++	*ecc_code++ = val;          /* P128e, ..., P1e */
++	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
++	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
++	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
++	reg += 4;
+ 
+ 	return 0;
+-} /* omap_calculate_ecc */
++}
+ 
++/*
++ * omap_enable_hwecc - This function enables the hardware ecc functionality
++ * @mtd: MTD device structure
++ * @mode: Read/Write mode
++ */
+ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ 							mtd);
++	register struct nand_chip *chip = mtd->priv;
++	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ 	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+ 
+ 	switch (mode) {
+ 	case NAND_ECC_READ    :
+ 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
+-		val = (1 << 7) | (0x0) | (0x1) ;
++		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
++		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ 		break;
+ 	case NAND_ECC_READSYN :
+-		__raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
+-		val = (1 << 7) | (0x0) | (0x1) ;
++		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
++		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
++		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ 		break;
+ 	case NAND_ECC_WRITE   :
+ 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
+-		val = (1 << 7) | (0x0) | (0x1) ;
++		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
++		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ 		break;
+ 	default:
+ 		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
+@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+ 
+ 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+ }
++#endif
+ 
++/*
++ * omap_wait - Wait function is called during Program and erase
++ * operations and the way it is called from MTD layer, we should wait
++ * till the NAND chip is ready after the programming/erase operation
++ * has completed.
++ * @mtd: MTD device structure
++ * @chip: NAND Chip structure
++ */
++static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
++{
++	register struct nand_chip *this = mtd->priv;
++	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
++							mtd);
++	int status = 0;
++
++	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
++						GPMC_CS_NAND_COMMAND;
++	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
++
++	while (!(status & 0x40)) {
++		 __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
++		status = __raw_readb(this->IO_ADDR_R);
++	}
++	return status;
++}
++
++/*
++ * omap_dev_ready - calls the platform specific dev_ready function
++ * @mtd: MTD device structure
++ */
+ static int omap_dev_ready(struct mtd_info *mtd)
+ {
+ 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	struct omap_nand_info		*info;
+ 	struct omap_nand_platform_data	*pdata;
+ 	int				err;
+-	unsigned long val;
++	unsigned long 			val;
+ 
+ 
+ 	pdata = pdev->dev.platform_data;
+@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	/* Enable RD PIN Monitoring Reg */
+-	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
+-	val |= WR_RD_PIN_MONITORING;
+-	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
++	if (pdata->dev_ready) {
++		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
++		val |= WR_RD_PIN_MONITORING;
++		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
++	}
+ 
+ 	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
+ 	val &= ~(0xf << 8);
+ 	val |=  (0xc & 0xf) << 8;
+ 	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
+ 
++	/* NAND write protect off */
++	omap_nand_wp(&info->mtd, NAND_WP_OFF);
++
+ 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+ 				pdev->dev.driver->name)) {
+ 		err = -EBUSY;
+@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	info->nand.write_buf  = omap_write_buf;
+ 	info->nand.verify_buf = omap_verify_buf;
+ 
+-	info->nand.dev_ready  = omap_dev_ready;
+-	info->nand.chip_delay = 0;
+-
+-	/* Options */
+-	info->nand.options   = NAND_BUSWIDTH_16;
+-	info->nand.options  |= NAND_SKIP_BBTSCAN;
+-
+-	if (hw_ecc) {
+-		/* init HW ECC */
+-		omap_hwecc_init(&info->mtd);
+-
+-		info->nand.ecc.calculate = omap_calculate_ecc;
+-		info->nand.ecc.hwctl     = omap_enable_hwecc;
+-		info->nand.ecc.correct   = omap_correct_data;
+-		info->nand.ecc.mode      = NAND_ECC_HW;
+-		info->nand.ecc.bytes     = 12;
+-		info->nand.ecc.size      = 2048;
+-		info->nand.ecc.layout    = &omap_hw_eccoob;
+-
++	/*
++	* If RDY/BSY line is connected to OMAP then use the omap ready funcrtion
++	* and the generic nand_wait function which reads the status register
++	* after monitoring the RDY/BSY line.Otherwise use a standard chip delay
++	* which is slightly more than tR (AC Timing) of the NAND device and read
++	* status register until you get a failure or success
++	*/
++	if (pdata->dev_ready) {
++		info->nand.dev_ready = omap_dev_ready;
++		info->nand.chip_delay = 0;
+ 	} else {
+-		info->nand.ecc.mode = NAND_ECC_SOFT;
++		info->nand.waitfunc = omap_wait;
++		info->nand.chip_delay = 50;
+ 	}
+ 
++	info->nand.options  |= NAND_SKIP_BBTSCAN;
++	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
++								== 0x1000)
++		info->nand.options  |= NAND_BUSWIDTH_16;
++
++#ifdef CONFIG_MTD_NAND_OMAP_HWECC
++	info->nand.ecc.bytes		= 3;
++	info->nand.ecc.size		= 512;
++	info->nand.ecc.calculate	= omap_calculate_ecc;
++	info->nand.ecc.hwctl		= omap_enable_hwecc;
++	info->nand.ecc.correct		= omap_correct_data;
++	info->nand.ecc.mode		= NAND_ECC_HW;
++
++	/* init HW ECC */
++	omap_hwecc_init(&info->mtd);
++#else
++	info->nand.ecc.mode = NAND_ECC_SOFT;
++#endif
+ 
+ 	/* DIP switches on some boards change between 8 and 16 bit
+ 	 * bus widths for flash.  Try the other width if the first try fails.
+@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
+ 	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
+ 	if (err > 0)
+ 		add_mtd_partitions(&info->mtd, info->parts, err);
+-	else if (err < 0 && pdata->parts)
++	else if (err <= 0 && pdata->parts)
+ 		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
+ 	else
+ #endif
+ 		add_mtd_device(&info->mtd);
+ 
+-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+-
+ 	platform_set_drvdata(pdev, &info->mtd);
+ 
+ 	return 0;
+diff --git a/include/asm-arm/arch-omap/board-omap3beagle.h b/include/asm-arm/arch-omap/board-omap3beagle.h
+index 46dff31..26ecfb8 100644
+--- a/include/asm-arm/arch-omap/board-omap3beagle.h
++++ b/include/asm-arm/arch-omap/board-omap3beagle.h
+@@ -29,5 +29,7 @@
+ #ifndef __ASM_ARCH_OMAP3_BEAGLE_H
+ #define __ASM_ARCH_OMAP3_BEAGLE_H
+ 
++extern void omap3beagle_flash_init(void);
++
+ #endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
+ 
diff --git a/packages/linux/linux-omap2_git.bb b/packages/linux/linux-omap2_git.bb
index 6c920a2027..0b85223437 100644
--- a/packages/linux/linux-omap2_git.bb
+++ b/packages/linux/linux-omap2_git.bb
@@ -5,7 +5,7 @@ FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-omap2-git/${MA
 SRCREV = "6b403428164c53d94bd9377d84e69052563dd57d"
 
 PV = "2.6.25+2.6.26-rc4+git${SRCREV}"
-PR = "r18"
+PR = "r19"
 
 
 SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=git \
@@ -19,6 +19,8 @@ SRC_URI_append_beagleboard = " file://no-harry-potter.diff;patch=1 \
            file://0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch;patch=1 \
            file://mux.patch;patch=1 \
            file://mcbsp-fix-include.patch;patch=1 \ 	
+	   file://0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch;patch=1 \
+	   file://flash.patch;patch=1 \
 "
 
 COMPATIBLE_MACHINE = "omap2430sdp|omap2420h4|beagleboard"