summaryrefslogtreecommitdiff
path: root/packages/wpa-supplicant/files
diff options
context:
space:
mode:
authorJoseph Cole <jnc@unknown.openembedded.org>2006-02-26 04:16:51 +0000
committerOpenEmbedded Project <openembedded-devel@lists.openembedded.org>2006-02-26 04:16:51 +0000
commitba1f81ba6dea91931c8da3399f522a421b812ae3 (patch)
tree86fd9519059f5da487b356e1f610ea3d50e827e4 /packages/wpa-supplicant/files
parentc60a1399f380c03d1210cf463af23628bd855602 (diff)
Introduce experimental wpa-supplicant linked against GNU/tls library.
Diffstat (limited to 'packages/wpa-supplicant/files')
-rw-r--r--packages/wpa-supplicant/files/defconfig-gnutls176
-rw-r--r--packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls502
2 files changed, 678 insertions, 0 deletions
diff --git a/packages/wpa-supplicant/files/defconfig-gnutls b/packages/wpa-supplicant/files/defconfig-gnutls
new file mode 100644
index 0000000000..2df5e51df8
--- /dev/null
+++ b/packages/wpa-supplicant/files/defconfig-gnutls
@@ -0,0 +1,176 @@
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
+LIBS = $(TARGET_LDFLAGS)
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=n
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for ndiswrapper
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+#CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for Broadcom driver
+#CONFIG_DRIVER_BROADCOM=y
+
+# Driver interface for Intel ipw2100 driver
+#CONFIG_DRIVER_IPW2100=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5 (automatically included if EAP-TTLS is enabled)
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Replace native Linux implementation of packet sockets with libdnet/libpcap.
+# This will be automatically set for non-Linux OS.
+#CONFIG_DNET_PCAP=y
+
+# Include control interface for external programs, e.g, wpa_cli
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
+#CONFIG_STAKEY=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# none = Empty template
+CONFIG_TLS=gnutls
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+CONFIG_GNUTLS_EXTRA=y
+
diff --git a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
new file mode 100644
index 0000000000..da407b5ef3
--- /dev/null
+++ b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
@@ -0,0 +1,502 @@
+##### Example wpa_supplicant configuration file ###############################
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# global configuration (shared by all network blocks)
+#
+# Interface for separate control program. If this is specified, wpa_supplicant
+# will create this directory and a UNIX domain socket for listening to requests
+# from external programs (CLI/GUI, etc.) for status information and
+# configuration. The socket file will be named based on the interface name, so
+# multiple wpa_supplicant processes can be run at the same time if more than
+# one interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+ctrl_interface=/var/run/wpa_supplicant
+
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# This variable can be a group name or gid.
+#ctrl_interface_group=wheel
+ctrl_interface_group=0
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
+eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection
+# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
+# parameters (e.g., WPA IE generation); this mode can also be used with
+# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
+# APs (i.e., external program needs to control association)
+# 2: like 0, but associate with APs using security policy and SSID (but not
+# BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to
+# enable operation with hidden SSIDs and optimized roaming; in this mode,
+# only the first network block in the configuration file is used and this
+# configuration should have explicit security policy (i.e., only one option
+# in the lists) for key_mgmt, pairwise, group, proto variables
+ap_scan=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
+fast_reauth=1
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# ssid: SSID (mandatory); either as an ASCII string with double quotation or
+# as hex string; network name
+#
+# scan_ssid:
+# 0 = do not scan this SSID with specific Probe Request frames (default)
+# 1 = scan with SSID-specific Probe Request frames (this can be used to
+# find APs that do not accept broadcast SSID or use multiple SSIDs;
+# this will add latency to scanning, so enable this only when needed)
+#
+# bssid: BSSID (optional); if set, this network block is used only when
+# associating with the AP using the configured BSSID
+#
+# priority: priority group (integer)
+# By default, all networks will get same priority group (0). If some of the
+# networks are more desirable, this field can be used to change the order in
+# which wpa_supplicant goes through the networks when selecting a BSS. The
+# priority groups will be iterated in decreasing priority (i.e., the larger the
+# priority value, the sooner the network is matched against the scan results).
+# Within each priority group, networks will be selected based on security
+# policy, signal strength, etc.
+# Please note that AP scanning with scan_ssid=1 is not using this priority to
+# select the order for scanning. Instead, it uses the order the networks are in
+# the configuration file.
+#
+# mode: IEEE 802.11 operation mode
+# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
+# 1 = IBSS (ad-hoc, peer-to-peer)
+# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
+# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
+# to be set to 2 for IBSS. WPA-None requires following network block options:
+# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
+# both), and psk must also be set.
+#
+# proto: list of accepted protocols
+# WPA = WPA/IEEE 802.11i/D3.0
+# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
+# If not set, this defaults to: WPA RSN
+#
+# key_mgmt: list of accepted authenticated key management protocols
+# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
+# WPA-EAP = WPA using EAP authentication (this can use an external
+# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
+# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
+# generated WEP keys
+# NONE = WPA is not used; plaintext or static WEP could be used
+# If not set, this defaults to: WPA-PSK WPA-EAP
+#
+# auth_alg: list of allowed IEEE 802.11 authentication algorithms
+# OPEN = Open System authentication (required for WPA/WPA2)
+# SHARED = Shared Key authentication (requires static WEP keys)
+# LEAP = LEAP/Network EAP (only used with LEAP)
+# If not set, automatic selection is used (Open System with LEAP enabled if
+# LEAP is allowed as one of the EAP methods).
+#
+# pairwise: list of accepted pairwise (unicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# NONE = Use only Group Keys (deprecated, should not be included if APs support
+# pairwise keys)
+# If not set, this defaults to: CCMP TKIP
+#
+# group: list of accepted group (broadcast/multicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
+# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
+# If not set, this defaults to: CCMP TKIP WEP104 WEP40
+#
+# psk: WPA preshared key; 256-bit pre-shared key
+# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
+# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
+# generated using the passphrase and SSID). ASCII passphrase must be between
+# 8 and 63 characters (inclusive).
+# This field is not needed, if WPA-EAP is used.
+# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
+# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
+# startup and reconfiguration time can be optimized by generating the PSK only
+# only when the passphrase or SSID has actually changed.
+#
+# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
+# Dynamic WEP key require for non-WPA mode
+# bit0 (1): require dynamically generated unicast WEP key
+# bit1 (2): require dynamically generated broadcast WEP key
+# (3 = require both keys; default)
+#
+# Following fields are only used with internal EAP implementation.
+# eap: space-separated list of accepted EAP methods
+# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
+# cannot be used with WPA; to be used as a Phase 2 method
+# with EAP-PEAP or EAP-TTLS)
+# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# OTP = EAP-OTP (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# GTC = EAP-GTC (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# TLS = EAP-TLS (client and server certificate)
+# PEAP = EAP-PEAP (with tunnelled EAP authentication)
+# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
+# authentication)
+# If not set, all compiled in methods are allowed.
+#
+# identity: Identity string for EAP
+# anonymous_identity: Anonymous identity string for EAP (to be used as the
+# unencrypted identity with EAP types that support different tunnelled
+# identity, e.g., EAP-TTLS)
+# password: Password string for EAP
+# ca_cert: File path to CA certificate file. This file can have one or more
+# trusted CA certificates. If ca_cert is not included, server certificate
+# will not be verified. This is insecure and the CA file should always be
+# configured.
+# client_cert: File path to client certificate file (PEM/DER)
+# private_key: File path to client private key file (PEM/DER/PFX)
+# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+# commented out. Both the private key and certificate will be read from
+# the PKCS#12 file in this case.
+# private_key_passwd: Password for private key file
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+# This is an optional configuration file for setting parameters for an
+# ephemeral DH key exchange. In most cases, the default RSA
+# authentication does not use this configuration. However, it is possible
+# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
+# DSA keys always use ephemeral DH keys. This can be used to achieve
+# forward secrecy. If the file is in DSA parameters format, it will be
+# automatically converted into DH params.
+# subject_match: Substring to be matched against the subject of the
+# authentication server certificate. If this string is set, the server
+# sertificate is only accepted if it contains this string in the subject.
+# The subject string is in following format:
+# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
+# (string with field-value pairs, e.g., "peapver=0" or
+# "peapver=1 peaplabel=1")
+# 'peapver' can be used to force which PEAP version (0 or 1) is used.
+# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
+# to be used during key derivation when PEAPv1 or newer. Most existing
+# PEAPv1 implementation seem to be using the old label, "client EAP
+# encryption", and wpa_supplicant is now using that as the default value.
+# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
+# interoperate with PEAPv1; see eap_testing.txt for more details.
+# 'peap_outer_success=0' can be used to terminate PEAP authentication on
+# tunneled EAP-Success. This is required with some RADIUS servers that
+# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
+# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
+# challenges (by default, it accepts 2 or 3)
+# phase2: Phase2 (inner authentication with TLS tunnel) parameters
+# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
+# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
+# Following certificate/private key fields are used in inner Phase2
+# authentication when using EAP-TTLS or EAP-PEAP.
+# ca_cert2: File path to CA certificate file. This file can have one or more
+# trusted CA certificates. If ca_cert2 is not included, server
+# certificate will not be verified. This is insecure and the CA file
+# should always be configured.
+# client_cert2: File path to client certificate file
+# private_key2: File path to client private key file
+# private_key2_passwd: Password for private key file
+# dh_file2: File path to DH/DSA parameters file (in PEM format)
+# subject_match2: Substring to be matched against the subject of the
+# authentication server certificate.
+#
+# EAP-PSK variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+# nai: user NAI
+# server_nai: authentication server NAI
+#
+# EAP-FAST variables:
+# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
+# to create this file and write updates to it when PAC is being
+# provisioned or refreshed.
+# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
+# credentials (PAC)
+#
+# wpa_supplicant supports number of "EAP workarounds" to work around
+# interoperability issues with incorrectly behaving authentication servers.
+# These are enabled by default because some of the issues are present in large
+# number of authentication servers. Strict EAP conformance mode can be
+# configured by disabling workarounds with eap_workaround=0.
+
+# Example blocks:
+
+# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
+network={
+ ssid="simple"
+ psk="very secret passphrase"
+ priority=5
+}
+
+# Same as previous, but request SSID-specific scanning (for APs that reject
+# broadcast SSID)
+network={
+ ssid="second ssid"
+ scan_ssid=1
+ psk="very secret passphrase"
+ priority=2
+}
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+ ssid="example"
+ proto=WPA
+ key_mgmt=WPA-PSK
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+ priority=2
+}
+
+# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
+# or WEP40 as the group cipher will not be accepted.
+network={
+ ssid="example"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ priority=1
+}
+
+# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
+# (e.g., Radiator)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=PEAP
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase1="peaplabel=1"
+ phase2="auth=MSCHAPV2"
+ priority=10
+}
+
+# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ priority=2
+}
+
+# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
+# use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase2="auth=MSCHAPV2"
+}
+
+# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
+# authentication.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ # Phase1 / outer authentication
+ anonymous_identity="anonymous@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ # Phase 2 / inner authentication
+ phase2="autheap=TLS"
+ ca_cert2="/etc/cert/ca2.pem"
+ client_cert2="/etc/cer/user.pem"
+ private_key2="/etc/cer/user.prv"
+ private_key2_passwd="password"
+ priority=2
+}
+
+# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
+# group cipher.
+network={
+ ssid="example"
+ bssid=00:11:22:33:44:55
+ proto=WPA RSN
+ key_mgmt=WPA-PSK WPA-EAP
+ pairwise=CCMP
+ group=CCMP
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+}
+
+# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
+# and all valid ciphers.
+network={
+ ssid=00010203
+ psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
+}
+
+
+# EAP-SIM with a GSM SIM or USIM
+network={
+ ssid="eap-sim-test"
+ key_mgmt=WPA-EAP
+ eap=SIM
+ pin="1234"
+ pcsc=""
+}
+
+
+# EAP-PSK
+network={
+ ssid="eap-psk-test"
+ key_mgmt=WPA-EAP
+ eap=PSK
+ identity="eap_psk_user"
+ eappsk=06b4be19da289f475aa46a33cb793029
+ nai="eap_psk_user@example.com"
+ server_nai="as@example.com"
+}
+
+
+# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
+# EAP-TLS for authentication and key generation; require both unicast and
+# broadcast WEP keys.
+network={
+ ssid="1x-test"
+ key_mgmt=IEEE8021X
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ eapol_flags=3
+}
+
+
+# LEAP with dynamic WEP keys
+network={
+ ssid="leap-example"
+ key_mgmt=IEEE8021X
+ eap=LEAP
+ identity="user"
+ password="foobar"
+}
+
+# EAP-FAST with WPA (WPA or WPA2)
+network={
+ ssid="eap-fast-test"
+ key_mgmt=WPA-EAP
+ eap=FAST
+ anonymous_identity="FAST-000102030405"
+ identity="username"
+ password="password"
+ phase1="fast_provisioning=1"
+ pac_file="/etc/wpa_supplicant.eap-fast-pac"
+}
+
+# Plaintext connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="plaintext-test"
+ key_mgmt=NONE
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="static-wep-test"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
+# IEEE 802.11 authentication
+network={
+ ssid="static-wep-test2"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+ auth_alg=SHARED
+}
+
+
+# IBSS/ad-hoc network with WPA-None/TKIP.
+network={
+ ssid="test adhoc"
+ mode=1
+ proto=WPA
+ key_mgmt=WPA-NONE
+ pairwise=NONE
+ group=TKIP
+ psk="secret passphrase"
+}
+
+
+# Catch all example that allows more or less all configuration modes
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk="very secret passphrase"
+ eap=TTLS PEAP TLS
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ phase1="peaplabel=0"
+}