packages/uboot/u-boot_1.1.6.bb : Add support for the MPC8323e-rdb board

9 files changed, 39002 insertions, 2 deletions

diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-83xx-optimizations.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-83xx-optimizations.patch
new file mode 100644
index 0000000000..fe85228771
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-83xx-optimizations.patch
@@ -0,0 +1,89 @@
+diff --exclude CVS -uNr u-boot-1.1.6/cpu/mpc83xx/cpu_init.c u-boot-1.1.6.modified/cpu/mpc83xx/cpu_init.c
+--- u-boot-1.1.6/cpu/mpc83xx/cpu_init.c	2007-04-10 17:43:16.000000000 -0400
++++ u-boot-1.1.6.modified/cpu/mpc83xx/cpu_init.c	2007-04-10 17:31:51.000000000 -0400
+@@ -66,10 +66,30 @@
+ 	memset ((void *) gd, 0, sizeof (gd_t));
+ 
+ 	/* system performance tweaking */
++	/* System Priority Configuration Register (SPCR) */
++#ifdef CFG_SPCR_PCIHPE
++	/* PCI highest priority enable */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_PCIHPE) | (CFG_SPCR_PCIHPE << SPCR_PCIHPE_SHIFT);
++#endif
+ 
+-#ifdef CFG_ACR_PIPE_DEP
+-	/* Arbiter pipeline depth */
+-	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
++#ifdef CFG_SPCR_PCIPR
++	/* PCI bridge CSB request priority  */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_PCIPR) | (CFG_SPCR_PCIPR << SPCR_PCIPR_SHIFT);
++#endif
++
++#ifdef CFG_SPCR_OPT
++	/* Optimize transactions between CSB and other devices */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) | (CFG_SPCR_OPT << SPCR_OPT_SHIFT);
++#endif
++
++#ifdef CFG_SPCR_TBEN
++	/* e300 time base unit enable */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TBEN) | (CFG_SPCR_TBEN << SPCR_TBEN_SHIFT);
++#endif
++
++#ifdef CFG_SPCR_COREPR
++	/* e300 core CSB request priority */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_COREPR) | (CFG_SPCR_COREPR << SPCR_COREPR_SHIFT);
+ #endif
+ 
+ #ifdef CFG_SPCR_TSEC1EP
+@@ -82,6 +102,7 @@
+ 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT);
+ #endif
+ 
++	/* System Clock Control Register (SCCR) */
+ #ifdef CFG_SCCR_TSEC1CM
+ 	/* TSEC1 clock mode */
+ 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT);
+@@ -91,6 +112,12 @@
+ 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT);
+ #endif
+ 
++	/* Arbiter Control Register (ACR) */
++#ifdef CFG_ACR_PIPE_DEP
++	/* Arbiter pipeline depth */
++	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
++#endif
++
+ #ifdef CFG_ACR_RPTCNT
+ 	/* Arbiter repeat count */
+ 	im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT));
+diff --exclude CVS -uNr u-boot-1.1.6/include/configs/MPC8323ERDB.h u-boot-1.1.6.modified/include/configs/MPC8323ERDB.h
+--- u-boot-1.1.6/include/configs/MPC8323ERDB.h	2007-04-10 17:43:16.000000000 -0400
++++ u-boot-1.1.6.modified/include/configs/MPC8323ERDB.h	2007-04-10 17:32:03.000000000 -0400
+@@ -63,6 +63,16 @@
+ 	HRCWH_BIG_ENDIAN |\
+ 	HRCWH_LALE_NORMAL)
+ 
++/* System performance */
++#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
++#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
++#define CFG_SPCR_PCIHPE		0	/* (0-1) PCI highest priority enable */
++#define CFG_SPCR_PCIPR		0	/* (0-3) PCI bridge CSB request priority */
++#define CFG_SPCR_OPT		1	/* (0-1) Optimize transactions between CSB and the SEC and QUICC Engine block */
++#define CFG_SPCR_TBEN		1	/* (0-1) e300 time base unit enable */
++#define CFG_SPCR_COREPR		0	/* (0-3) e300 core CSB request priority */
++
++
+ /*
+  * System IO Config
+  */
+diff --exclude CVS -uNr u-boot-1.1.6/include/mpc83xx.h u-boot-1.1.6.modified/include/mpc83xx.h
+--- u-boot-1.1.6/include/mpc83xx.h	2007-04-10 17:43:16.000000000 -0400
++++ u-boot-1.1.6.modified/include/mpc83xx.h	2007-04-10 17:32:15.000000000 -0400
+@@ -91,6 +91,7 @@
+ #define SPCR_PCIPR			0x03000000	/* PCI bridge system bus request priority */
+ #define SPCR_PCIPR_SHIFT		(31-7)
+ #define SPCR_OPT			0x00800000	/* Optimize */
++#define SPCR_OPT_SHIFT			(31-8)
+ #define SPCR_TBEN			0x00400000	/* E300 PowerPC core time base unit enable */
+ #define SPCR_TBEN_SHIFT			(31-9)
+ #define SPCR_COREPR			0x00300000	/* E300 PowerPC Core system bus request priority */
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch
new file mode 100644
index 0000000000..5018cd3434
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch
@@ -0,0 +1,1809 @@
+fe298a1bbd7b9526ca1139da8977e1a076c4e176
+diff --git a/Makefile b/Makefile
+index d2534ab..d172411 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1621,6 +1621,30 @@ MPC8360EMDS_SLAVE_config:	unconfig
+ MPC8349ITX_config:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
+ 
++MPC832XEMDS_config \
++MPC832XEMDS_HOST_33_config \
++MPC832XEMDS_HOST_66_config \
++MPC832XEMDS_SLAVE_config:	unconfig
++	@echo "" >include/config.h ; \
++	if [ "$(findstring _HOST_,$@)" ] ; then \
++		echo -n "... PCI HOST " ; \
++		echo "#define CONFIG_PCI" >>include/config.h ; \
++	fi ; \
++	if [ "$(findstring _SLAVE_,$@)" ] ; then \
++		echo "...PCI SLAVE 66M"  ; \
++		echo "#define CONFIG_PCI" >>include/config.h ; \
++		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
++	fi ; \
++	if [ "$(findstring _33_,$@)" ] ; then \
++		echo -n "...33M ..." ; \
++		echo "#define PCI_33M" >>include/config.h ; \
++	fi ; \
++	if [ "$(findstring _66_,$@)" ] ; then \
++		echo -n "...66M..." ; \
++		echo "#define PCI_66M" >>include/config.h ; \
++	fi ;
++	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
++
+ #########################################################################
+ ## MPC85xx Systems
+ #########################################################################
+diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile
+new file mode 100644
+index 0000000..5ec7a87
+--- /dev/null
++++ b/board/mpc832xemds/Makefile
+@@ -0,0 +1,50 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS	:= $(BOARD).o pci.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/mpc832xemds/config.mk b/board/mpc832xemds/config.mk
+new file mode 100644
+index 0000000..6c3eca7
+--- /dev/null
++++ b/board/mpc832xemds/config.mk
+@@ -0,0 +1,28 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# MPC832XEMDS
++#
++
++TEXT_BASE = 0xFE000000
+diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c
+new file mode 100644
+index 0000000..772da67
+--- /dev/null
++++ b/board/mpc832xemds/mpc832xemds.c
+@@ -0,0 +1,176 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <common.h>
++#include <ioports.h>
++#include <mpc83xx.h>
++#include <i2c.h>
++#include <spd.h>
++#include <miiphy.h>
++#include <command.h>
++#if defined(CONFIG_PCI)
++#include <pci.h>
++#endif
++#if defined(CONFIG_SPD_EEPROM)
++#include <spd_sdram.h>
++#else
++#include <asm/mmu.h>
++#endif
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
++const qe_iop_conf_t qe_iop_conf_tab[] = {
++	/* ETH3 */
++	{1,  0, 1, 0, 1}, /* TxD0 */
++	{1,  1, 1, 0, 1}, /* TxD1 */
++	{1,  2, 1, 0, 1}, /* TxD2 */
++	{1,  3, 1, 0, 1}, /* TxD3 */
++	{1,  9, 1, 0, 1}, /* TxER */
++	{1, 12, 1, 0, 1}, /* TxEN */
++	{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
++
++	{1,  4, 2, 0, 1}, /* RxD0 */
++	{1,  5, 2, 0, 1}, /* RxD1 */
++	{1,  6, 2, 0, 1}, /* RxD2 */
++	{1,  7, 2, 0, 1}, /* RxD3 */
++	{1,  8, 2, 0, 1}, /* RxER */
++	{1, 10, 2, 0, 1}, /* RxDV */
++	{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
++	{1, 11, 2, 0, 1}, /* COL */
++	{1, 13, 2, 0, 1}, /* CRS */
++
++	/* ETH4 */
++	{1, 18, 1, 0, 1}, /* TxD0 */
++	{1, 19, 1, 0, 1}, /* TxD1 */
++	{1, 20, 1, 0, 1}, /* TxD2 */
++	{1, 21, 1, 0, 1}, /* TxD3 */
++	{1, 27, 1, 0, 1}, /* TxER */
++	{1, 30, 1, 0, 1}, /* TxEN */
++	{3,  6, 2, 0, 1}, /* TxCLK->CLK8 */
++
++	{1, 22, 2, 0, 1}, /* RxD0 */
++	{1, 23, 2, 0, 1}, /* RxD1 */
++	{1, 24, 2, 0, 1}, /* RxD2 */
++	{1, 25, 2, 0, 1}, /* RxD3 */
++	{1, 26, 1, 0, 1}, /* RxER */
++	{1, 28, 2, 0, 1}, /* Rx_DV */
++	{3, 31, 2, 0, 1}, /* RxCLK->CLK7 */
++	{1, 29, 2, 0, 1}, /* COL */
++	{1, 31, 2, 0, 1}, /* CRS */
++
++	{3,  4, 3, 0, 2}, /* MDIO */
++	{3,  5, 1, 0, 2}, /* MDC */
++
++	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
++};
++
++int board_early_init_f(void)
++{
++	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
++
++	/* Enable flash write */
++	bcsr[9] &= ~0x08;
++
++	return 0;
++}
++
++int fixed_sdram(void);
++
++long int initdram(int board_type)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++
++	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
++		return -1;
++
++	/* DDR SDRAM - Main SODIMM */
++	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
++
++	msize = fixed_sdram();
++
++	puts("\n   DDR RAM: ");
++
++	/* return total bus SDRAM size(bytes)  -- DDR */
++	return (msize * 1024 * 1024);
++}
++
++/*************************************************************************
++ *  fixed sdram init -- doesn't use serial presence detect.
++ ************************************************************************/
++int fixed_sdram(void)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++	u32 ddr_size;
++	u32 ddr_size_log2;
++
++	msize = CFG_DDR_SIZE;
++	for (ddr_size = msize << 20, ddr_size_log2 = 0;
++	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
++		if (ddr_size & 1) {
++			return -1;
++		}
++	}
++	im->sysconf.ddrlaw[0].ar =
++	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
++#if (CFG_DDR_SIZE != 128)
++#warning Currenly any ddr size other than 128 is not supported
++#endif
++	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
++	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
++	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
++	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
++	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
++	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
++	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
++	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
++	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
++	im->ddr.sdram_mode = CFG_DDR_MODE;
++	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
++	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
++	__asm__ __volatile__ ("sync");
++	udelay(200);
++
++	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
++	__asm__ __volatile__ ("sync");
++	return msize;
++}
++
++int checkboard(void)
++{
++	puts("Board: Freescale MPC832XEMDS\n");
++	return 0;
++}
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++#ifdef CONFIG_PCI
++	ft_pci_setup(blob, bd);
++#endif
++	ft_cpu_setup(blob, bd);
++
++	p = ft_get_prop(blob, "/memory/reg", &len);
++	if (p != NULL) {
++		*p++ = cpu_to_be32(bd->bi_memstart);
++		*p = cpu_to_be32(bd->bi_memsize);
++	}
++}
++#endif
+diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c
+new file mode 100644
+index 0000000..09f3ac3
+--- /dev/null
++++ b/board/mpc832xemds/pci.c
+@@ -0,0 +1,313 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++/*
++ * PCI Configuration space access support for MPC83xx PCI Bridge
++ */
++#include <asm/mmu.h>
++#include <asm/io.h>
++#include <common.h>
++#include <pci.h>
++#include <i2c.h>
++
++#include <asm/fsl_i2c.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if defined(CONFIG_PCI)
++#define PCI_FUNCTION_CONFIG   0x44
++#define PCI_FUNCTION_CFG_LOCK 0x20
++
++/*
++ * Initialize PCI Devices, report devices found
++ */
++#ifndef CONFIG_PCI_PNP
++static struct pci_config_table pci_mpc83xxemds_config_table[] = {
++	{
++		PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++		pci_cfgfunc_config_device,
++		{PCI_ENET0_IOADDR,
++		PCI_ENET0_MEMADDR,
++		PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
++	},
++	{}
++}
++#endif
++static struct pci_controller hose[] = {
++	{
++#ifndef CONFIG_PCI_PNP
++		config_table:pci_mpc83xxemds_config_table,
++#endif
++	},
++};
++
++/**********************************************************************
++ * pci_init_board()
++ *********************************************************************/
++void pci_init_board(void)
++#ifdef CONFIG_PCISLAVE
++{
++	u16 reg16;
++	volatile immap_t *immr;
++	volatile law83xx_t *pci_law;
++	volatile pot83xx_t *pci_pot;
++	volatile pcictrl83xx_t *pci_ctrl;
++	volatile pciconf83xx_t *pci_conf;
++
++	immr = (immap_t *) CFG_IMMR;
++	pci_law = immr->sysconf.pcilaw;
++	pci_pot = immr->ios.pot;
++	pci_ctrl = immr->pci_ctrl;
++	pci_conf = immr->pci_conf;
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++	pci_ctrl[0].pitar0 = 0x0;
++	pci_ctrl[0].pibar0 = 0x0;
++	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
++	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
++
++	pci_ctrl[0].pitar1 = 0x0;
++	pci_ctrl[0].pibar1 = 0x0;
++	pci_ctrl[0].piebar1 = 0x0;
++	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
++
++	pci_ctrl[0].pitar2 = 0x0;
++	pci_ctrl[0].pibar2 = 0x0;
++	pci_ctrl[0].piebar2 = 0x0;
++	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
++
++	hose[0].first_busno = 0;
++	hose[0].last_busno = 0xff;
++	pci_setup_indirect(&hose[0],
++			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++	reg16 = 0xff;
++
++	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				  PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_LATENCY_TIMER, 0x80);
++
++	/*
++	 * Unlock configuration lock in PCI function configuration register.
++	 */
++	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				  PCI_FUNCTION_CONFIG, &reg16);
++	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
++	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_FUNCTION_CONFIG, reg16);
++
++	printf("Enabled PCI 32bit Agent Mode\n");
++}
++#else
++{
++	volatile immap_t *immr;
++	volatile clk83xx_t *clk;
++	volatile law83xx_t *pci_law;
++	volatile pot83xx_t *pci_pot;
++	volatile pcictrl83xx_t *pci_ctrl;
++	volatile pciconf83xx_t *pci_conf;
++
++	u8 val8, orig_i2c_bus;
++	u16 reg16;
++	u32 val32;
++	u32 dev;
++
++	immr = (immap_t *) CFG_IMMR;
++	clk = (clk83xx_t *) & immr->clk;
++	pci_law = immr->sysconf.pcilaw;
++	pci_pot = immr->ios.pot;
++	pci_ctrl = immr->pci_ctrl;
++	pci_conf = immr->pci_conf;
++	/*
++	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
++	 */
++	val32 = clk->occr;
++	udelay(2000);
++#if defined(PCI_66M)
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++	printf("PCI clock is 66MHz\n");
++#elif defined(PCI_33M)
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
++	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
++	printf("PCI clock is 33MHz\n");
++#else
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++	printf("PCI clock is 66MHz\n");
++#endif
++	udelay(2000);
++
++	/*
++	 * Configure PCI Local Access Windows
++	 */
++	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
++	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
++
++	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
++	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
++
++	/*
++	 * Configure PCI Outbound Translation Windows
++	 */
++
++	/* PCI mem space - prefetch */
++	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[0].pocmr =
++	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
++
++	/* PCI mmio - non-prefetch mem space */
++	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
++
++	/* PCI IO space */
++	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
++
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
++	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
++	pci_ctrl[0].piebar1 = 0x0;
++	pci_ctrl[0].piwar1 =
++	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
++	    PIWAR_IWS_2G;
++
++	/*
++	 * Assign PIB PMC slot to desired PCI bus
++	 */
++
++	/* Switch temporarily to I2C bus #2 */
++	orig_i2c_bus = i2c_get_bus_num();
++	i2c_set_bus_num(1);
++
++	val8 = 0;
++	i2c_write(0x23, 0x6, 1, &val8, 1);
++	i2c_write(0x23, 0x7, 1, &val8, 1);
++	val8 = 0xff;
++	i2c_write(0x23, 0x2, 1, &val8, 1);
++	i2c_write(0x23, 0x3, 1, &val8, 1);
++
++	val8 = 0;
++	i2c_write(0x26, 0x6, 1, &val8, 1);
++	val8 = 0x34;
++	i2c_write(0x26, 0x7, 1, &val8, 1);
++
++	val8 = 0xf9;		/* PMC2, PMC3 slot to PCI bus */
++	i2c_write(0x26, 0x2, 1, &val8, 1);
++	val8 = 0xff;
++	i2c_write(0x26, 0x3, 1, &val8, 1);
++
++	val8 = 0;
++	i2c_write(0x27, 0x6, 1, &val8, 1);
++	i2c_write(0x27, 0x7, 1, &val8, 1);
++	val8 = 0xff;
++	i2c_write(0x27, 0x2, 1, &val8, 1);
++	val8 = 0xef;
++	i2c_write(0x27, 0x3, 1, &val8, 1);
++	asm("eieio");
++
++	/* Reset to original I2C bus */
++	i2c_set_bus_num(orig_i2c_bus);
++
++	/*
++	 * Release PCI RST Output signal
++	 */
++	udelay(2000);
++	pci_ctrl[0].gcr = 1;
++	udelay(2000);
++
++	hose[0].first_busno = 0;
++	hose[0].last_busno = 0xff;
++
++	/* PCI memory prefetch space */
++	pci_set_region(hose[0].regions + 0,
++		       CFG_PCI_MEM_BASE,
++		       CFG_PCI_MEM_PHYS,
++		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
++
++	/* PCI memory space */
++	pci_set_region(hose[0].regions + 1,
++		       CFG_PCI_MMIO_BASE,
++		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
++
++	/* PCI IO space */
++	pci_set_region(hose[0].regions + 2,
++		       CFG_PCI_IO_BASE,
++		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
++
++	/* System memory space */
++	pci_set_region(hose[0].regions + 3,
++		       CFG_PCI_SLV_MEM_LOCAL,
++		       CFG_PCI_SLV_MEM_BUS,
++		       CFG_PCI_SLV_MEM_SIZE,
++		       PCI_REGION_MEM | PCI_REGION_MEMORY);
++
++	hose[0].region_count = 4;
++
++	pci_setup_indirect(&hose[0],
++			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++
++	pci_register_hose(hose);
++
++	/*
++	 * Write command register
++	 */
++	reg16 = 0xff;
++	dev = PCI_BDF(0, 0, 0);
++	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
++	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
++
++	printf("PCI 32bit bus on PMC2 & PMC3\n");
++
++	/*
++	 * Hose scan.
++	 */
++	hose->last_busno = pci_hose_scan(hose);
++}
++#endif				/* CONFIG_PCISLAVE */
++
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_pci_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
++	if (p != NULL) {
++		p[0] = hose[0].first_busno;
++		p[1] = hose[0].last_busno;
++	}
++}
++#endif				/* CONFIG_OF_FLAT_TREE */
++#endif				/* CONFIG_PCI */
+diff --git a/board/mpc832xemds/u-boot.lds b/board/mpc832xemds/u-boot.lds
+new file mode 100644
+index 0000000..937c87a
+--- /dev/null
++++ b/board/mpc832xemds/u-boot.lds
+@@ -0,0 +1,123 @@
++/*
++ * (C) Copyright 2006
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SECTIONS
++{
++  /* Read-only sections, merged into text segment: */
++  . = + SIZEOF_HEADERS;
++  .interp : { *(.interp) }
++  .hash          : { *(.hash)		}
++  .dynsym        : { *(.dynsym)		}
++  .dynstr        : { *(.dynstr)		}
++  .rel.text      : { *(.rel.text)		}
++  .rela.text     : { *(.rela.text) 	}
++  .rel.data      : { *(.rel.data)		}
++  .rela.data     : { *(.rela.data) 	}
++  .rel.rodata    : { *(.rel.rodata) 	}
++  .rela.rodata   : { *(.rela.rodata) 	}
++  .rel.got       : { *(.rel.got)		}
++  .rela.got      : { *(.rela.got)		}
++  .rel.ctors     : { *(.rel.ctors)	}
++  .rela.ctors    : { *(.rela.ctors)	}
++  .rel.dtors     : { *(.rel.dtors)	}
++  .rela.dtors    : { *(.rela.dtors)	}
++  .rel.bss       : { *(.rel.bss)		}
++  .rela.bss      : { *(.rela.bss)		}
++  .rel.plt       : { *(.rel.plt)		}
++  .rela.plt      : { *(.rela.plt)		}
++  .init          : { *(.init)	}
++  .plt : { *(.plt) }
++  .text      :
++  {
++    cpu/mpc83xx/start.o	(.text)
++    *(.text)
++    *(.fixup)
++    *(.got1)
++    . = ALIGN(16);
++    *(.rodata)
++    *(.rodata1)
++    *(.rodata.str1.4)
++    *(.eh_frame)
++  }
++  .fini      : { *(.fini)    } =0
++  .ctors     : { *(.ctors)   }
++  .dtors     : { *(.dtors)   }
++
++  /* Read-write section, merged into data segment: */
++  . = (. + 0x0FFF) & 0xFFFFF000;
++  _erotext = .;
++  PROVIDE (erotext = .);
++  .reloc   :
++  {
++    *(.got)
++    _GOT2_TABLE_ = .;
++    *(.got2)
++    _FIXUP_TABLE_ = .;
++    *(.fixup)
++  }
++  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++  .data    :
++  {
++    *(.data)
++    *(.data1)
++    *(.sdata)
++    *(.sdata2)
++    *(.dynamic)
++    CONSTRUCTORS
++  }
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  . = .;
++  __u_boot_cmd_start = .;
++  .u_boot_cmd : { *(.u_boot_cmd) }
++  __u_boot_cmd_end = .;
++
++
++  . = .;
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  . = ALIGN(4096);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(4096);
++  __init_end = .;
++
++  __bss_start = .;
++  .bss       :
++  {
++   *(.sbss) *(.scommon)
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++  }
++  _end = . ;
++  PROVIDE (end = .);
++}
++ENTRY(_start)
+diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
+index 1b51078..bc61219 100644
+--- a/cpu/mpc83xx/cpu.c
++++ b/cpu/mpc83xx/cpu.c
+@@ -92,6 +92,22 @@ int checkcpu(void)
+ 	case SPR_8360_REV12:
+ 		puts("MPC8360, ");
+ 		break;
++	case SPR_8323E_REV10:
++	case SPR_8323E_REV11:
++		puts("MPC8323E, ");
++		break;
++	case SPR_8323_REV10:
++	case SPR_8323_REV11:
++		puts("MPC8323, ");
++		break;
++	case SPR_8321E_REV10:
++	case SPR_8321E_REV11:
++		puts("MPC8321E, ");
++		break;
++	case SPR_8321_REV10:
++	case SPR_8321_REV11:
++		puts("MPC8321, ");
++		break;
+ 	default:
+ 		puts("Rev: Unknown\n");
+ 		return -1;	/* Not sure what this is */
+diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
+index 7574fab..eb256e5 100644
+--- a/cpu/mpc83xx/cpu_init.c
++++ b/cpu/mpc83xx/cpu_init.c
+@@ -119,6 +119,11 @@ void cpu_init_f (volatile immap_t * im)
+ #ifdef CFG_SICRL
+ 	im->sysconf.sicrl = CFG_SICRL;
+ #endif
++	/* DDR control driver register */
++#ifdef CFG_DDRCDR
++	im->sysconf.ddrcdr = CFG_DDRCDR;
++#endif
++
+ #ifdef CONFIG_QE
+ 	/* Config QE ioports */
+ 	config_qe_ioports();
+diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
+index 40ba6b0..9fd1bf1 100644
+--- a/cpu/mpc83xx/speed.c
++++ b/cpu/mpc83xx/speed.c
+@@ -107,15 +107,19 @@ int get_clocks(void)
+ #endif
+ 	u32 core_clk;
+ 	u32 i2c1_clk;
++#if !defined(CONFIG_MPC832X)
+ 	u32 i2c2_clk;
++#endif
+ 	u32 enc_clk;
+ 	u32 lbiu_clk;
+ 	u32 lclk_clk;
+ 	u32 ddr_clk;
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
++	u32 ddr_sec_clk;
++#endif
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ 	u32 qepmf;
+ 	u32 qepdf;
+-	u32 ddr_sec_clk;
+ 	u32 qe_clk;
+ 	u32 brg_clk;
+ #endif
+@@ -227,10 +231,12 @@ int get_clocks(void)
+ 		return -9;
+ 	}
+ #endif
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ 	i2c1_clk = csb_clk;
+ #endif
++#if !defined(CONFIG_MPC832X)
+ 	i2c2_clk = csb_clk;	/* i2c-2 clk is equal to csb clk */
++#endif
+ 
+ 	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ 	case 0:
+@@ -249,12 +255,9 @@ int get_clocks(void)
+ 		/* unkown SCCR_ENCCM value */
+ 		return -6;
+ 	}
+-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
++
+ 	lbiu_clk = csb_clk *
+ 	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+-#else
+-#error Unknown MPC83xx chip
+-#endif
+ 	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+ 	switch (lcrr) {
+ 	case 2:
+@@ -266,17 +269,14 @@ int get_clocks(void)
+ 		/* unknown lcrr */
+ 		return -10;
+ 	}
+-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
++
+ 	ddr_clk = csb_clk *
+ 		  (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
+ 	corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
+ 	ddr_sec_clk = csb_clk * (1 +
+ 		       ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+ #endif
+-#else
+-#error Unknown MPC83xx chip
+-#endif
+ 
+ 	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
+ 	if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
+@@ -306,7 +306,7 @@ int get_clocks(void)
+ 		return -12;
+ 	}
+ 
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ 	qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
+ 	qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
+ 	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
+@@ -322,13 +322,17 @@ int get_clocks(void)
+ #endif
+ 	gd->core_clk = core_clk;
+ 	gd->i2c1_clk = i2c1_clk;
++#if !defined(CONFIG_MPC832X)
+ 	gd->i2c2_clk = i2c2_clk;
++#endif
+ 	gd->enc_clk = enc_clk;
+ 	gd->lbiu_clk = lbiu_clk;
+ 	gd->lclk_clk = lclk_clk;
+ 	gd->ddr_clk = ddr_clk;
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
+ 	gd->ddr_sec_clk = ddr_sec_clk;
++#endif
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ 	gd->qe_clk = qe_clk;
+ 	gd->brg_clk = brg_clk;
+ #endif
+@@ -352,18 +356,21 @@ int print_clock_conf(void)
+ 	printf("Clock configuration:\n");
+ 	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+ 	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ 	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
++	printf("  BRG:                 %4d MHz\n", gd->brg_clk / 1000000);
+ #endif
+ 	printf("  Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
+ 	printf("  Local Bus:           %4d MHz\n", gd->lclk_clk / 1000000);
+ 	printf("  DDR:                 %4d MHz\n", gd->ddr_clk / 1000000);
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
+ 	printf("  DDR Secondary:       %4d MHz\n", gd->ddr_sec_clk / 1000000);
+ #endif
+ 	printf("  SEC:                 %4d MHz\n", gd->enc_clk / 1000000);
+ 	printf("  I2C1:                %4d MHz\n", gd->i2c1_clk / 1000000);
++#if !defined(CONFIG_MPC832X)
+ 	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
++#endif
+ #if defined(CONFIG_MPC8349)
+ 	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
+ 	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
+diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
+index f7f8ed0..0bcd0a9 100644
+--- a/drivers/qe/qe.h
++++ b/drivers/qe/qe.h
+@@ -30,7 +30,7 @@
+ #define UCC_MAX_NUM	8
+ 
+ #define QE_DATAONLY_BASE	(uint)(128)
+-#define QE_DATAONLY_SIZE	((uint)(0xc000) - QE_DATAONLY_BASE)
++#define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)
+ 
+ /* QE threads SNUM
+ */
+diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
+index c44a5be..aea455b 100644
+--- a/drivers/qe/uec.c
++++ b/drivers/qe/uec.c
+@@ -432,7 +432,12 @@ static int init_phy(struct eth_device *dev)
+ 	}
+ 	memset(mii_info, 0, sizeof(*mii_info));
+ 
+-	mii_info->speed = SPEED_1000;
++	if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
++		mii_info->speed = SPEED_1000;
++	} else {
++		mii_info->speed = SPEED_100;
++	}
++
+ 	mii_info->duplex = DUPLEX_FULL;
+ 	mii_info->pause = 0;
+ 	mii_info->link = 1;
+@@ -508,7 +513,8 @@ static void adjust_link(struct eth_device *dev)
+ 		}
+ 
+ 		if (mii_info->speed != uec->oldspeed) {
+-			switch (mii_info->speed) {
++			if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
++				switch (mii_info->speed) {
+ 				case 1000:
+ 					break;
+ 				case 100:
+@@ -531,6 +537,7 @@ static void adjust_link(struct eth_device *dev)
+ 					printf("%s: Ack,Speed(%d)is illegal\n",
+ 						dev->name, mii_info->speed);
+ 					break;
++				}
+ 			}
+ 
+ 			printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
+diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
+index 79dcae4..ff9512f 100644
+--- a/include/asm-ppc/e300.h
++++ b/include/asm-ppc/e300.h
+@@ -15,6 +15,11 @@
+ #define PVR_8360_REV10 (PVR_83xx | 0x0020)
+ #define PVR_8360_REV11 (PVR_83xx | 0x0020)
+ 
++#if defined(CONFIG_MPC832X)
++#undef PVR_83xx
++#define PVR_83xx 0x80840000
++#endif
++
+ /*
+  * Hardware Implementation-Dependent Register 0 (HID0)
+  */
+diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
+index 67b035c..77a079f 100644
+--- a/include/asm-ppc/immap_83xx.h
++++ b/include/asm-ppc/immap_83xx.h
+@@ -60,7 +60,10 @@ typedef struct sysconf83xx {
+ 	u32 spcr;		/* System Priority Configuration Register */
+ 	u32 sicrl;		/* System I/O Configuration Register Low */
+ 	u32 sicrh;		/* System I/O Configuration Register High */
+-	u8 res6[0xE4];
++	u8 res6[0x0C];
++	u32 ddrcdr;		/* DDR Control Driver Register */
++	u32 ddrdsr;		/* DDR Debug Status Register */
++	u8 res7[0xD0];
+ } sysconf83xx_t;
+ 
+ /*
+@@ -274,25 +277,35 @@ typedef struct ddr83xx {
+ 	ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */
+ 	u8 res0[0x60];
+ 	u32 cs_config[4];	/* Chip Select x Configuration */
+-	u8 res1[0x78];
++	u8 res1[0x70];
++	u32 timing_cfg_3;	/* SDRAM Timing Configuration 3 */
++	u32 timing_cfg_0;	/* SDRAM Timing Configuration 0 */
+ 	u32 timing_cfg_1;	/* SDRAM Timing Configuration 1 */
+ 	u32 timing_cfg_2;	/* SDRAM Timing Configuration 2 */
+ 	u32 sdram_cfg;		/* SDRAM Control Configuration */
+-	u8 res2[4];
++	u32 sdram_cfg2;		/* SDRAM Control Configuration 2 */
+ 	u32 sdram_mode;		/* SDRAM Mode Configuration */
+-	u8 res3[8];
++	u32 sdram_mode2;	/* SDRAM Mode Configuration 2 */
++	u32 sdram_md_cntl;	/* SDRAM Mode Control */
+ 	u32 sdram_interval;	/* SDRAM Interval Configuration */
+-	u8 res9[8];
+-	u32 sdram_clk_cntl;
+-	u8 res4[0xCCC];
++	u32 ddr_data_init;	/* SDRAM Data Initialization */
++	u8 res2[4];
++	u32 sdram_clk_cntl;	/* SDRAM Clock Control */
++	u8 res3[0x14];
++	u32 ddr_init_addr;	/* DDR training initialization address */
++	u32 ddr_init_ext_addr;	/* DDR training initialization extended address */
++	u8 res4[0xAA8];
++	u32 ddr_ip_rev1;	/* DDR IP block revision 1 */
++	u32 ddr_ip_rev2;	/* DDR IP block revision 2 */
++	u8 res5[0x200];
+ 	u32 data_err_inject_hi;	/* Memory Data Path Error Injection Mask High */
+ 	u32 data_err_inject_lo;	/* Memory Data Path Error Injection Mask Low */
+ 	u32 ecc_err_inject;	/* Memory Data Path Error Injection Mask ECC */
+-	u8 res5[0x14];
++	u8 res6[0x14];
+ 	u32 capture_data_hi;	/* Memory Data Path Read Capture High */
+ 	u32 capture_data_lo;	/* Memory Data Path Read Capture Low */
+ 	u32 capture_ecc;	/* Memory Data Path Read Capture ECC */
+-	u8 res6[0x14];
++	u8 res7[0x14];
+ 	u32 err_detect;		/* Memory Error Detect */
+ 	u32 err_disable;	/* Memory Error Disable */
+ 	u32 err_int_en;		/* Memory Error Interrupt Enable */
+@@ -300,9 +313,9 @@ typedef struct ddr83xx {
+ 	u32 capture_address;	/* Memory Error Address Capture */
+ 	u32 capture_ext_address;/* Memory Error Extended Address Capture */
+ 	u32 err_sbe;		/* Memory Single-Bit ECC Error Management */
+-	u8 res7[0xA4];
++	u8 res8[0xA4];
+ 	u32 debug_reg;
+-	u8 res8[0xFC];
++	u8 res9[0xFC];
+ } ddr83xx_t;
+ 
+ /*
+@@ -607,6 +620,43 @@ typedef struct immap {
+ 	u8			res10[0xC0000];
+ 	u8			qe[0x100000];	/* QE block */
+ } immap_t;
++
++#elif defined(CONFIG_MPC832X)
++typedef struct immap {
++	sysconf83xx_t		sysconf;	/* System configuration */
++	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
++	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
++	rtclk83xx_t		pit;		/* Periodic Interval Timer */
++	gtm83xx_t		gtm[2];		/* Global Timers Module */
++	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
++	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
++	reset83xx_t		reset;		/* Reset Module */
++	clk83xx_t		clk;		/* System Clock Module */
++	pmc83xx_t		pmc;		/* Power Management Control Module */
++	qepi83xx_t		qepi;		/* QE Ports Interrupts Registers */
++	u8			res0[0x300];
++	u8			dll_ddr[0x100];
++	u8			dll_lbc[0x100];
++	u8			res1[0x200];
++	qepio83xx_t		qepio;		/* QE Parallel I/O ports */
++	u8			res2[0x800];
++	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
++	fsl_i2c_t		i2c[2];		/* I2C Controllers */
++	u8			res3[0x1300];
++	duart83xx_t		duart[2];	/* DUART */
++	u8			res4[0x900];
++	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
++	u8			res5[0x2000];
++	dma83xx_t		dma;		/* DMA */
++	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
++	u8			res6[128];
++	ios83xx_t		ios;		/* Sequencer (IOS) */
++	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
++	u8			res7[0x27A00];
++	security83xx_t		security;
++	u8			res8[0xC0000];
++	u8			qe[0x100000];	/* QE block */
++} immap_t;
+ #endif
+ 
+ #endif				/* __IMMAP_83xx__ */
+diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
+index f385032..950b949 100644
+--- a/include/asm-ppc/immap_qe.h
++++ b/include/asm-ppc/immap_qe.h
+@@ -547,4 +547,10 @@ typedef struct qe_immap {
+ 
+ extern qe_map_t *qe_immr;
+ 
++#if defined(CONFIG_MPC8360)
++#define QE_MURAM_SIZE		0xc000UL
++#elif defined(CONFIG_MPC832X)
++#define QE_MURAM_SIZE		0x4000UL
++#endif
++
+ #endif				/* __IMMAP_QE_H__ */
+diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
+new file mode 100644
+index 0000000..b8bf00f
+--- /dev/null
++++ b/include/configs/MPC832XEMDS.h
+@@ -0,0 +1,629 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#undef DEBUG
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_E300		1	/* E300 family */
++#define CONFIG_QE		1	/* Has QE */
++#define CONFIG_MPC83XX		1	/* MPC83xx family */
++#define CONFIG_MPC832X		1	/* MPC832x CPU specific */
++#define CONFIG_MPC832XEMDS	1	/* MPC832XEMDS board specific */
++
++/*
++ * System Clock Setup
++ */
++#ifdef CONFIG_PCISLAVE
++#define CONFIG_83XX_PCICLK	66000000	/* in HZ */
++#else
++#define CONFIG_83XX_CLKIN	66000000	/* in Hz */
++#endif
++
++#ifndef CONFIG_SYS_CLK_FREQ
++#define CONFIG_SYS_CLK_FREQ	66000000
++#endif
++
++/*
++ * Hardware Reset Configuration Word
++ */
++#define CFG_HRCW_LOW (\
++	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
++	HRCWL_DDR_TO_SCB_CLK_2X1 |\
++	HRCWL_VCO_1X2 |\
++	HRCWL_CSB_TO_CLKIN_2X1 |\
++	HRCWL_CORE_TO_CSB_2X1 |\
++	HRCWL_CE_PLL_VCO_DIV_2 |\
++	HRCWL_CE_PLL_DIV_1X1 |\
++	HRCWL_CE_TO_PLL_1X3)
++
++#ifdef CONFIG_PCISLAVE
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_AGENT |\
++	HRCWH_PCI1_ARBITER_DISABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0XFFF00100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT |\
++	HRCWH_BIG_ENDIAN |\
++	HRCWH_LALE_NORMAL)
++#else
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_HOST |\
++	HRCWH_PCI1_ARBITER_ENABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0X00000100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT |\
++	HRCWH_BIG_ENDIAN |\
++	HRCWH_LALE_NORMAL)
++#endif
++
++/*
++ * System IO Config
++ */
++#define CFG_SICRL		0x00000000
++
++#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
++
++/*
++ * IMMR new address
++ */
++#define CFG_IMMR		0xE0000000
++
++/*
++ * DDR Setup
++ */
++#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
++#define CFG_SDRAM_BASE		CFG_DDR_BASE
++#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
++#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
++
++#undef CONFIG_SPD_EEPROM
++#if defined(CONFIG_SPD_EEPROM)
++/* Determine DDR configuration from I2C interface
++ */
++#define SPD_EEPROM_ADDRESS	0x51	/* DDR SODIMM */
++#else
++/* Manually set up DDR parameters
++ */
++#define CFG_DDR_SIZE		128	/* MB */
++#define CFG_DDR_CS0_CONFIG	0x80840102
++#define CFG_DDR_TIMING_0	0x00220802
++#define CFG_DDR_TIMING_1	0x3935d322
++#define CFG_DDR_TIMING_2	0x0f9048ca
++#define CFG_DDR_TIMING_3	0x00000000
++#define CFG_DDR_CLK_CNTL	0x02000000
++#define CFG_DDR_MODE		0x44400232
++#define CFG_DDR_MODE2		0x8000c000
++#define CFG_DDR_INTERVAL	0x03200064
++#define CFG_DDR_CS0_BNDS	0x00000007
++#define CFG_DDR_SDRAM_CFG	0x43080000
++#define CFG_DDR_SDRAM_CFG2	0x00401000
++#endif
++
++/*
++ * Memory test
++ */
++#undef CFG_DRAM_TEST		/* memory test, takes time */
++#define CFG_MEMTEST_START	0x00000000	/* memtest region */
++#define CFG_MEMTEST_END		0x00100000
++
++/*
++ * The reserved memory
++ */
++#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
++
++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
++#define CFG_RAMBOOT
++#else
++#undef  CFG_RAMBOOT
++#endif
++
++#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
++#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
++
++/*
++ * Initial RAM Base Address Setup
++ */
++#define CFG_INIT_RAM_LOCK	1
++#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
++#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
++#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++/*
++ * Local Bus Configuration & Clock Setup
++ */
++#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
++#define CFG_LBC_LBCR		0x00000000
++
++/*
++ * FLASH on the Local Bus
++ */
++#define CFG_FLASH_CFI		/* use the Common Flash Interface */
++#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
++#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
++#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
++
++#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
++#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
++
++#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
++			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
++			BR_V)			/* valid */
++#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
++
++#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
++#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
++
++#undef CFG_FLASH_CHECKSUM
++
++/*
++ * BCSR on the Local Bus
++ */
++#define CFG_BCSR		0xF8000000
++#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR	/* Access window base at BCSR base */
++#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* Access window size 32K */
++
++#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801)	/* Port size=8bit, MSEL=GPCM */
++#define CFG_OR1_PRELIM		0xFFFFE9f7	/* length 32K */
++
++/*
++ * SDRAM on the Local Bus
++ */
++#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */
++
++#ifdef CFG_LB_SDRAM
++#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
++#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
++
++#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
++#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
++
++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
++/*
++ * Base Register 2 and Option Register 2 configure SDRAM.
++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
++ *
++ * For BR2, need:
++ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
++ *    port size = 32-bits = BR2[19:20] = 11
++ *    no parity checking = BR2[21:22] = 00
++ *    SDRAM for MSEL = BR2[24:26] = 011
++ *    Valid = BR[31] = 1
++ *
++ * 0    4    8    12   16   20   24   28
++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
++ *
++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
++ * the top 17 bits of BR2.
++ */
++
++#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
++
++/*
++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
++ *
++ * For OR2, need:
++ *    64MB mask for AM, OR2[0:7] = 1111 1100
++ *                 XAM, OR2[17:18] = 11
++ *    9 columns OR2[19-21] = 010
++ *    13 rows   OR2[23-25] = 100
++ *    EAD set for extra time OR[31] = 1
++ *
++ * 0    4    8    12   16   20   24   28
++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
++ */
++
++#define CFG_OR2_PRELIM	0xfc006901
++
++#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
++#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
++
++/*
++ * LSDMR masks
++ */
++#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
++
++#define CFG_LBC_LSDMR_COMMON	0x0063b723
++
++/*
++ * SDRAM Controller configuration sequence.
++ */
++#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_PCHALL)
++#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_MRW)
++#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_NORMAL)
++
++#endif
++
++/*
++ * Windows to access PIB via local bus
++ */
++#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
++#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
++
++/*
++ * CS2 on Local Bus, to PIB
++ */
++#define CFG_BR2_PRELIM	0xf8008801	/* CS2 base address at 0xf8008000 */
++#define CFG_OR2_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
++
++/*
++ * CS3 on Local Bus, to PIB
++ */
++#define CFG_BR3_PRELIM	0xf8010801	/* CS3 base address at 0xf8010000 */
++#define CFG_OR3_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
++
++/*
++ * Serial Port
++ */
++#define CONFIG_CONS_INDEX	1
++#undef CONFIG_SERIAL_SOFTWARE_FIFO
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE	1
++#define CFG_NS16550_CLK		get_bus_freq(0)
++
++#define CFG_BAUDRATE_TABLE  \
++	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
++
++#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
++#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
++
++/* Use the HUSH parser */
++#define CFG_HUSH_PARSER
++#ifdef CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2 "> "
++#endif
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE	1
++#define CONFIG_OF_BOARD_SETUP	1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE	8192
++
++#define OF_CPU			"PowerPC,8323@0"
++#define OF_SOC			"soc8323@e0000000"
++#define OF_TBCLK		(bd->bi_busfreq / 4)
++#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
++
++/* I2C */
++#define CONFIG_HARD_I2C		/* I2C with hardware support */
++#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
++#define CONFIG_FSL_I2C
++#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
++#define CFG_I2C_SLAVE	0x7F
++#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
++#define CFG_I2C_OFFSET	0x3000
++
++/*
++ * Config on-board RTC
++ */
++#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
++#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
++
++/*
++ * General PCI
++ * Addresses are mapped 1-1.
++ */
++#define CFG_PCI_MEM_BASE	0x80000000
++#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
++#define CFG_PCI_MEM_SIZE	0x10000000	/* 256M */
++#define CFG_PCI_MMIO_BASE	0x90000000
++#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
++#define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
++#define CFG_PCI_IO_BASE		0xE0300000
++#define CFG_PCI_IO_PHYS		0xE0300000
++#define CFG_PCI_IO_SIZE		0x100000	/* 1M */
++
++#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
++#define CFG_PCI_SLV_MEM_BUS	0x00000000
++#define CFG_PCI_SLV_MEM_SIZE	0x80000000
++
++
++#ifdef CONFIG_PCI
++
++#define CONFIG_NET_MULTI
++#define CONFIG_PCI_PNP		/* do pci plug-and-play */
++
++#undef CONFIG_EEPRO100
++#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
++#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
++
++#endif	/* CONFIG_PCI */
++
++
++#ifndef CONFIG_NET_MULTI
++#define CONFIG_NET_MULTI	1
++#endif
++
++/*
++ * QE UEC ethernet configuration
++ */
++#define CONFIG_UEC_ETH
++#define CONFIG_ETHPRIME		"Freescale GETH"
++
++#define CONFIG_UEC_ETH1		/* ETH3 */
++
++#ifdef CONFIG_UEC_ETH1
++#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
++#define CFG_UEC1_RX_CLK		QE_CLK9
++#define CFG_UEC1_TX_CLK		QE_CLK10
++#define CFG_UEC1_ETH_TYPE	FAST_ETH
++#define CFG_UEC1_PHY_ADDR	3
++#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
++#endif
++
++#define CONFIG_UEC_ETH2		/* ETH4 */
++
++#ifdef CONFIG_UEC_ETH2
++#define CFG_UEC2_UCC_NUM	3	/* UCC4 */
++#define CFG_UEC2_RX_CLK		QE_CLK7
++#define CFG_UEC2_TX_CLK		QE_CLK8
++#define CFG_UEC2_ETH_TYPE	FAST_ETH
++#define CFG_UEC2_PHY_ADDR	4
++#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
++#endif
++
++/*
++ * Environment
++ */
++#ifndef CFG_RAMBOOT
++	#define CFG_ENV_IS_IN_FLASH	1
++	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
++	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
++	#define CFG_ENV_SIZE		0x2000
++#else
++	#define CFG_NO_FLASH		1	/* Flash is not usable now */
++	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
++	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
++	#define CFG_ENV_SIZE		0x2000
++#endif
++
++#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
++#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
++
++#if defined(CFG_RAMBOOT)
++#if defined(CONFIG_PCI)
++#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_PCI \
++				| CFG_CMD_I2C) \
++				& \
++				~(CFG_CMD_ENV \
++				| CFG_CMD_LOADS))
++#else
++#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C) \
++				& \
++				~(CFG_CMD_ENV \
++				| CFG_CMD_LOADS))
++#endif
++#else
++#if defined(CONFIG_PCI)
++#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
++				| CFG_CMD_PCI \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C)
++#else
++#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C  )
++#endif
++#endif
++
++#include <cmd_confdefs.h>
++
++#undef CONFIG_WATCHDOG		/* watchdog disabled */
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP		/* undef to save memory */
++#define CFG_LOAD_ADDR		0x2000000	/* default load address */
++#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
++#else
++	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
++#endif
++
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
++#define CFG_MAXARGS	16		/* max number of command args */
++#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
++#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
++
++/*
++ * Core HID Setup
++ */
++#define CFG_HID0_INIT		0x000000000
++#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
++#define CFG_HID2		HID2_HBE
++
++/*
++ * Cache Config
++ */
++#define CFG_DCACHE_SIZE		16384
++#define CFG_CACHELINE_SIZE	32
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
++#endif
++
++/*
++ * MMU Setup
++ */
++
++/* DDR: cache cacheable */
++#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT0L	CFG_IBAT0L
++#define CFG_DBAT0U	CFG_IBAT0U
++
++/* IMMRBAR & PCI IO: cache-inhibit and guarded */
++#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
++#define CFG_DBAT1L	CFG_IBAT1L
++#define CFG_DBAT1U	CFG_IBAT1U
++
++/* BCSR: cache-inhibit and guarded */
++#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT2L	CFG_IBAT2L
++#define CFG_DBAT2U	CFG_IBAT2U
++
++/* FLASH: icache cacheable, but dcache-inhibit and guarded */
++#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
++#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT3U	CFG_IBAT3U
++
++#define CFG_IBAT4L	(0)
++#define CFG_IBAT4U	(0)
++#define CFG_DBAT4L	CFG_IBAT4L
++#define CFG_DBAT4U	CFG_IBAT4U
++
++/* Stack in dcache: cacheable, no memory coherence */
++#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
++#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT5L	CFG_IBAT5L
++#define CFG_DBAT5U	CFG_IBAT5U
++
++#ifdef CONFIG_PCI
++/* PCI MEM space: cacheable */
++#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++/* PCI MMIO space: cache-inhibit and guarded */
++#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT7L	CFG_IBAT7L
++#define CFG_DBAT7U	CFG_IBAT7U
++#else
++#define CFG_IBAT6L	(0)
++#define CFG_IBAT6U	(0)
++#define CFG_IBAT7L	(0)
++#define CFG_IBAT7U	(0)
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++#define CFG_DBAT7L	CFG_IBAT7L
++#define CFG_DBAT7U	CFG_IBAT7U
++#endif
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM	0x02	/* Software reboot */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
++#endif
++
++/*
++ * Environment Configuration
++ */
++
++#define CONFIG_ENV_OVERWRITE
++
++#if defined(CONFIG_UEC_ETH)
++#define CONFIG_ETHADDR	00:04:9f:ef:03:01
++#define CONFIG_HAS_ETH1
++#define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
++#endif
++
++#define CONFIG_BAUDRATE	115200
++
++#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
++
++#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
++#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
++
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++   "netdev=eth0\0"							\
++   "consoledev=ttyS0\0"							\
++   "ramdiskaddr=1000000\0"						\
++   "ramdiskfile=ramfs.83xx\0"						\
++   "fdtaddr=400000\0"							\
++   "fdtfile=mpc832xemds.dtb\0"						\
++   ""
++
++#define CONFIG_NFSBOOTCOMMAND						\
++   "setenv bootargs root=/dev/nfs rw "					\
++      "nfsroot=$serverip:$rootpath "					\
++      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr - $fdtaddr"
++
++#define CONFIG_RAMBOOTCOMMAND						\
++   "setenv bootargs root=/dev/ram rw "					\
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $ramdiskaddr $ramdiskfile;"					\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr $ramdiskaddr $fdtaddr"
++
++
++#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
++
++#endif	/* __CONFIG_H */
+diff --git a/include/mpc83xx.h b/include/mpc83xx.h
+index 504b6a9..52e4369 100644
+--- a/include/mpc83xx.h
++++ b/include/mpc83xx.h
+@@ -75,6 +75,15 @@
+ #define SPR_8360E_REV12			0x80480012
+ #define SPR_8360_REV12			0x80490012
+ 
++#define SPR_8323E_REV10			0x80620010
++#define SPR_8323_REV10			0x80630010
++#define SPR_8321E_REV10			0x80660010
++#define SPR_8321_REV10			0x80670010
++#define SPR_8323E_REV11			0x80620011
++#define SPR_8323_REV11			0x80630011
++#define SPR_8321E_REV11			0x80660011
++#define SPR_8321_REV11			0x80670011
++
+ /* SPCR - System Priority Configuration Register
+  */
+ #define SPCR_PCIHPE			0x10000000	/* PCI Highest Priority Enable */
+@@ -167,6 +176,14 @@
+ #define SICRH_UC1EOBI			0x00000004
+ #define SICRH_UC2E1OBI			0x00000002
+ #define SICRH_UC2E2OBI			0x00000001
++
++#elif defined(CONFIG_MPC832X)
++/* SICRL bits - MPC832X specific */
++#define SICRL_LDP_LCS_A			0x80000000
++#define SICRL_IRQ_CKS			0x20000000
++#define SICRL_PCI_MSRC			0x10000000
++#define SICRL_URT_CTPR			0x06000000
++#define SICRL_IRQ_CTPR			0x00C00000
+ #endif
+ 
+ /* SWCRR - System Watchdog Control Register
+@@ -270,7 +287,7 @@
+ #define HRCWL_CORE_TO_CSB_2_5X1		0x00050000
+ #define HRCWL_CORE_TO_CSB_3X1		0x00060000
+ 
+-#if defined(CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ #define HRCWL_CEVCOD			0x000000C0
+ #define HRCWL_CEVCOD_SHIFT		6
+ #define HRCWL_CE_PLL_VCO_DIV_4		0x00000000
+@@ -718,7 +735,7 @@
+ #define BR_MS_UPMA			0x00000080	/* UPMA */
+ #define BR_MS_UPMB			0x000000A0	/* UPMB */
+ #define BR_MS_UPMC			0x000000C0	/* UPMC */
+-#if defined(CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ #define BR_ATOM				0x0000000C
+ #define BR_ATOM_SHIFT			2
+ #endif
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch
new file mode 100644
index 0000000000..b5e2a87b16
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch
@@ -0,0 +1,131 @@
+657bdd350516722e4d73329caf37aae694f7eaaa
+diff --git a/doc/README.mpc832xemds b/doc/README.mpc832xemds
+new file mode 100644
+index 0000000..00c3af1
+--- /dev/null
++++ b/doc/README.mpc832xemds
+@@ -0,0 +1,124 @@
++Freescale MPC832XEMDS Board
++-----------------------------------------
++1. Board Switches and Jumpers
++1.0 There are five Dual-In-Line Packages(DIP) Switches on MPC832XE SYS board
++	For some reason, the HW designers describe the switch settings
++	in terms of 0 and 1, and then map that to physical switches where
++	the label "On" refers to logic 0 and "Off" is logic 1.
++
++	Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
++	bits may contribute to signals that are numbered based at 0,
++	and some of those signals may be high-bit-number-0 too.  Heed
++	well the names and labels and do not get confused.
++
++		"Off" == 1
++		"On"  == 0
++
++	SW3 is switch 18 as silk-screened onto the board.
++	SW4[8] is the bit labled 8 on Switch 4.
++	SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5.
++	SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6.
++	SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
++		and bits labeled 8 is set as "Off".
++
++1.1 For the MPC832XEMDS PROTO Board
++
++	First, make sure the board default setting is consistent with the
++	document shipped with your board. Then apply the following setting:
++	SW3[1-8]= 0000_1000  (core PLL setting, core enable)
++	SW4[1-8]= 0001_0010  (Flash boot on local bus, system PLL setting)
++	SW5[1-8]= 0010_0110  (Boot from high end)
++	SW6[1-8]= 0011_0100  (Flash boot on 16 bit local bus)
++	SW7[1-8]= 1000_0011  (QE PLL setting)
++
++	ENET3/4 MII mode settings:
++	J1 1-2 (ETH3_TXER)
++	J2 2-3 (MII mode)
++	J3 2-3 (MII mode)
++	J4 2-3 (ADSL clockOscillator)
++	J5 1-2 (ETH4_TXER)
++	J6 2-3 (ClockOscillator)
++	JP1 removed (don't force PORESET)
++	JP2 mounted (ETH4/2 MII)
++	JP3 mounted (ETH3 MII)
++	JP4 mounted (HRCW from BCSR)
++
++	ENET3/4 RMII mode settings:
++	J1 1-2 (ETH3_TXER)
++	J2 1-2 (RMII mode)
++	J3 1-2 (RMII mode)
++	J4 2-3 (ADSL clockOscillator)
++	J5 1-2 (ETH4_TXER)
++	J6 2-3 (ClockOscillator)
++	JP1 removed (don't force PORESET)
++	JP2 removed (ETH4/2 RMII)
++	JP3 removed (ETH3 RMII)
++	JP4 removed (HRCW from FLASH)
++
++	on board Oscillator: 66M
++
++
++2. Memory Map
++
++2.1 The memory map should look pretty much like this:
++
++	0x0000_0000	0x7fff_ffff	DDR			2G
++	0x8000_0000	0x8fff_ffff	PCI MEM prefetch	256M
++	0x9000_0000	0x9fff_ffff	PCI MEM non-prefetch	256M
++	0xc000_0000	0xdfff_ffff	Empty			512M
++	0xe000_0000	0xe01f_ffff	Int Mem Reg Space	2M
++	0xe020_0000	0xe02f_ffff	Empty			1M
++	0xe030_0000	0xe03f_ffff	PCI IO			1M
++	0xe040_0000	0xefff_ffff	Empty			252M
++	0xf400_0000	0xf7ff_ffff	Empty			64M
++	0xf800_0000	0xf800_7fff	BCSR on CS1		32K
++	0xf800_8000	0xf800_ffff	PIB CS2			32K
++	0xf801_0000	0xf801_7fff	PIB CS3			32K
++	0xfe00_0000	0xfeff_ffff	FLASH on CS0		16M
++
++
++3. Definitions
++
++3.1 Explanation of NEW definitions in:
++
++	include/configs/MPC832XEMDS.h
++
++    CONFIG_MPC83XX	MPC83XX family for MPC8349, MPC8360 and MPC832X
++    CONFIG_MPC832X	MPC832X specific
++    CONFIG_MPC832XEMDS	MPC832XEMDS board specific
++
++4. Compilation
++
++	Assuming you're using BASH shell:
++
++		export CROSS_COMPILE=your-cross-compile-prefix
++		cd u-boot
++		make distclean
++		make MPC832XEMDS_config
++		make
++
++	MPC832X support PCI 33MHz and PCI 66MHz, to make u-boot support PCI:
++
++		1)Make sure the DIP SW support PCI mode
++		  as described in Section 1.1.
++
++		2)To Make U-Boot image support PCI 33MHz, use
++			Make MPC832XEMDS_HOST_33_config
++
++		3)To Make U-Boot image support PCI 66MHz, use
++			Make MPC832XEMDS_HOST_66_config
++
++5. Downloading and Flashing Images
++
++5.0 Download over network:
++
++	tftp 20000 u-boot.bin
++
++5.1 Reflash U-boot Image using U-boot
++
++    If your current u-boot sets $filesize automatically:
++
++	protect off fe000000 +$filesize
++	erase fe000000 +$filesize
++	cp.b 20000 fe000000 $filesize
++
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch
new file mode 100644
index 0000000000..23a9717e74
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch
@@ -0,0 +1,1221 @@
+7a328e85f4ff0b6c074a7fdb302e6e6f6f36e7f2
+diff --git a/Makefile b/Makefile
+index d172411..73014fd 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1645,6 +1645,12 @@ MPC832XEMDS_SLAVE_config:	unconfig
+ 	fi ;
+ 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
+ 
++MPC8323ERDB_config:	unconfig
++	@echo "" >include/config.h ; \
++		echo -n "... PCI HOST " ; \
++		echo "#define CONFIG_PCI" >>include/config.h ;
++	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb
++
+ #########################################################################
+ ## MPC85xx Systems
+ #########################################################################
+diff --git a/board/mpc8323erdb/Makefile b/board/mpc8323erdb/Makefile
+new file mode 100644
+index 0000000..5ec7a87
+--- /dev/null
++++ b/board/mpc8323erdb/Makefile
+@@ -0,0 +1,50 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS	:= $(BOARD).o pci.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/mpc8323erdb/config.mk b/board/mpc8323erdb/config.mk
+new file mode 100644
+index 0000000..fe0d37d
+--- /dev/null
++++ b/board/mpc8323erdb/config.mk
+@@ -0,0 +1,28 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# MPC8323ERDB
++#
++
++TEXT_BASE = 0xFE000000
+diff --git a/board/mpc8323erdb/mpc8323erdb.c b/board/mpc8323erdb/mpc8323erdb.c
+new file mode 100644
+index 0000000..239adbb
+--- /dev/null
++++ b/board/mpc8323erdb/mpc8323erdb.c
+@@ -0,0 +1,169 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Michael Barkowski <michael.barkowski@freescale.com>
++ * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <common.h>
++#include <ioports.h>
++#include <mpc83xx.h>
++#include <i2c.h>
++#include <spd.h>
++#include <miiphy.h>
++#include <command.h>
++#if defined(CONFIG_PCI)
++#include <pci.h>
++#endif
++#if defined(CONFIG_SPD_EEPROM)
++#include <spd_sdram.h>
++#else
++#include <asm/mmu.h>
++#endif
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
++const qe_iop_conf_t qe_iop_conf_tab[] = {
++	/* UCC3 */
++	{1,  0, 1, 0, 1}, /* TxD0 */
++	{1,  1, 1, 0, 1}, /* TxD1 */
++	{1,  2, 1, 0, 1}, /* TxD2 */
++	{1,  3, 1, 0, 1}, /* TxD3 */
++	{1,  9, 1, 0, 1}, /* TxER */
++	{1, 12, 1, 0, 1}, /* TxEN */
++	{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
++
++	{1,  4, 2, 0, 1}, /* RxD0 */
++	{1,  5, 2, 0, 1}, /* RxD1 */
++	{1,  6, 2, 0, 1}, /* RxD2 */
++	{1,  7, 2, 0, 1}, /* RxD3 */
++	{1,  8, 2, 0, 1}, /* RxER */
++	{1, 10, 2, 0, 1}, /* RxDV */
++	{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
++	{1, 11, 2, 0, 1}, /* COL */
++	{1, 13, 2, 0, 1}, /* CRS */
++
++	/* UCC2 */
++	{0, 18, 1, 0, 1}, /* TxD0 */
++	{0, 19, 1, 0, 1}, /* TxD1 */
++	{0, 20, 1, 0, 1}, /* TxD2 */
++	{0, 21, 1, 0, 1}, /* TxD3 */
++	{0, 27, 1, 0, 1}, /* TxER */
++	{0, 30, 1, 0, 1}, /* TxEN */
++	{3, 23, 2, 0, 1}, /* TxCLK->CLK3 */
++
++	{0, 22, 2, 0, 1}, /* RxD0 */
++	{0, 23, 2, 0, 1}, /* RxD1 */
++	{0, 24, 2, 0, 1}, /* RxD2 */
++	{0, 25, 2, 0, 1}, /* RxD3 */
++	{0, 26, 1, 0, 1}, /* RxER */
++	{0, 28, 2, 0, 1}, /* Rx_DV */
++	{3, 21, 2, 0, 1}, /* RxCLK->CLK16 */
++	{0, 29, 2, 0, 1}, /* COL */
++	{0, 31, 2, 0, 1}, /* CRS */
++
++	{3,  4, 3, 0, 2}, /* MDIO */
++	{3,  5, 1, 0, 2}, /* MDC */
++
++	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
++};
++
++int board_early_init_f(void)
++{
++	return 0;
++}
++
++int fixed_sdram(void);
++
++long int initdram(int board_type)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++
++	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
++		return -1;
++
++	/* DDR SDRAM - Main SODIMM */
++	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
++
++	msize = fixed_sdram();
++
++	puts("\n   DDR RAM: ");
++
++	/* return total bus SDRAM size(bytes)  -- DDR */
++	return (msize * 1024 * 1024);
++}
++
++/*************************************************************************
++ *  fixed sdram init -- doesn't use serial presence detect.
++ ************************************************************************/
++int fixed_sdram(void)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++	u32 ddr_size;
++	u32 ddr_size_log2;
++
++	msize = CFG_DDR_SIZE;
++	for (ddr_size = msize << 20, ddr_size_log2 = 0;
++	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
++		if (ddr_size & 1) {
++			return -1;
++		}
++	}
++	im->sysconf.ddrlaw[0].ar =
++	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
++	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
++	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
++	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
++	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
++	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
++	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
++	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
++	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
++	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
++	im->ddr.sdram_mode = CFG_DDR_MODE;
++	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
++	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
++	__asm__ __volatile__ ("sync");
++	udelay(200);
++
++	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
++	__asm__ __volatile__ ("sync");
++	return msize;
++}
++
++int checkboard(void)
++{
++	puts("Board: Freescale MPC8323ERDB\n");
++	return 0;
++}
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++#ifdef CONFIG_PCI
++	ft_pci_setup(blob, bd);
++#endif
++	ft_cpu_setup(blob, bd);
++
++	p = ft_get_prop(blob, "/memory/reg", &len);
++	if (p != NULL) {
++		*p++ = cpu_to_be32(bd->bi_memstart);
++		*p = cpu_to_be32(bd->bi_memsize);
++	}
++}
++#endif
+diff --git a/board/mpc8323erdb/pci.c b/board/mpc8323erdb/pci.c
+new file mode 100644
+index 0000000..2e942d2
+--- /dev/null
++++ b/board/mpc8323erdb/pci.c
+@@ -0,0 +1,208 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Michael Barkowski <michael.barkowski@freescale.com>
++ * Based on mpc832xemds/pci.c by Dave Liu.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++/*
++ * PCI Configuration space access support for MPC83xx PCI Bridge
++ */
++#include <asm/mmu.h>
++#include <asm/io.h>
++#include <common.h>
++#include <pci.h>
++#include <i2c.h>
++
++#include <asm/fsl_i2c.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if defined(CONFIG_PCI)
++#define PCI_FUNCTION_CONFIG   0x44
++#define PCI_FUNCTION_CFG_LOCK 0x20
++
++/*
++ * Initialize PCI Devices, report devices found
++ */
++#ifndef CONFIG_PCI_PNP
++static struct pci_config_table pci_mpc8323erdb_config_table[] = {
++	{
++		PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++		pci_cfgfunc_config_device,
++		{PCI_ENET0_IOADDR,
++		PCI_ENET0_MEMADDR,
++		PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
++	},
++	{}
++}
++#endif
++static struct pci_controller hose[] = {
++	{
++#ifndef CONFIG_PCI_PNP
++		config_table:pci_mpc8323erdb_config_table,
++#endif
++	},
++};
++
++/**********************************************************************
++ * pci_init_board()
++ *********************************************************************/
++void pci_init_board(void)
++{
++	volatile immap_t *immr;
++	volatile clk83xx_t *clk;
++	volatile law83xx_t *pci_law;
++	volatile pot83xx_t *pci_pot;
++	volatile pcictrl83xx_t *pci_ctrl;
++	volatile pciconf83xx_t *pci_conf;
++
++	u8 val8;
++	u16 reg16;
++	u32 val32;
++	u32 dev;
++
++	immr = (immap_t *) CFG_IMMR;
++	clk = (clk83xx_t *) & immr->clk;
++	pci_law = immr->sysconf.pcilaw;
++	pci_pot = immr->ios.pot;
++	pci_ctrl = immr->pci_ctrl;
++	pci_conf = immr->pci_conf;
++	/*
++	 * Enable PCI output signals
++	 */
++	val32 = clk->occr;
++	udelay(2000);
++	/* if pin /CFG_CLKIN_DIV=1, PCI clock = clkin = 66MHz;
++	   if pin /CFG_CLKIN_DIV=0, PCI clock = clkin/2 = 33MHz; */
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++	if (clk->spmr & SPMR_CKID)
++	  printf("PCI clock is 33MHz\n");
++	else
++	  printf("PCI clock is 66MHz\n");
++	udelay(2000);
++
++	/*
++	 * Configure PCI Local Access Windows
++	 */
++	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
++	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
++
++	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
++	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
++
++	/*
++	 * Configure PCI Outbound Translation Windows
++	 */
++
++	/* PCI mem space - prefetch */
++	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[0].pocmr =
++	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
++
++	/* PCI mmio - non-prefetch mem space */
++	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
++
++	/* PCI IO space */
++	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
++
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
++	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
++	pci_ctrl[0].piebar1 = 0x0;
++	pci_ctrl[0].piwar1 =
++	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
++	    PIWAR_IWS_2G;
++
++	/*
++	 * Release PCI RST Output signal
++	 */
++	udelay(2000);
++	pci_ctrl[0].gcr = 1;
++	udelay(2000);
++
++	hose[0].first_busno = 0;
++	hose[0].last_busno = 0xff;
++
++	/* PCI memory prefetch space */
++	pci_set_region(hose[0].regions + 0,
++		       CFG_PCI_MEM_BASE,
++		       CFG_PCI_MEM_PHYS,
++		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
++
++	/* PCI memory space */
++	pci_set_region(hose[0].regions + 1,
++		       CFG_PCI_MMIO_BASE,
++		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
++
++	/* PCI IO space */
++	pci_set_region(hose[0].regions + 2,
++		       CFG_PCI_IO_BASE,
++		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
++
++	/* System memory space */
++	pci_set_region(hose[0].regions + 3,
++		       CFG_PCI_SLV_MEM_LOCAL,
++		       CFG_PCI_SLV_MEM_BUS,
++		       CFG_PCI_SLV_MEM_SIZE,
++		       PCI_REGION_MEM | PCI_REGION_MEMORY);
++
++	hose[0].region_count = 4;
++
++	pci_setup_indirect(&hose[0],
++			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++
++	pci_register_hose(hose);
++
++	/*
++	 * Write command register
++	 */
++	reg16 = 0xff;
++	dev = PCI_BDF(0, 0, 0);
++	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
++	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
++
++	/*
++	 * Hose scan.
++	 */
++	hose->last_busno = pci_hose_scan(hose);
++}
++
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_pci_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
++	if (p != NULL) {
++		p[0] = hose[0].first_busno;
++		p[1] = hose[0].last_busno;
++	}
++}
++#endif				/* CONFIG_OF_FLAT_TREE */
++#endif				/* CONFIG_PCI */
+diff --git a/board/mpc8323erdb/u-boot.lds b/board/mpc8323erdb/u-boot.lds
+new file mode 100644
+index 0000000..937c87a
+--- /dev/null
++++ b/board/mpc8323erdb/u-boot.lds
+@@ -0,0 +1,123 @@
++/*
++ * (C) Copyright 2006
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SECTIONS
++{
++  /* Read-only sections, merged into text segment: */
++  . = + SIZEOF_HEADERS;
++  .interp : { *(.interp) }
++  .hash          : { *(.hash)		}
++  .dynsym        : { *(.dynsym)		}
++  .dynstr        : { *(.dynstr)		}
++  .rel.text      : { *(.rel.text)		}
++  .rela.text     : { *(.rela.text) 	}
++  .rel.data      : { *(.rel.data)		}
++  .rela.data     : { *(.rela.data) 	}
++  .rel.rodata    : { *(.rel.rodata) 	}
++  .rela.rodata   : { *(.rela.rodata) 	}
++  .rel.got       : { *(.rel.got)		}
++  .rela.got      : { *(.rela.got)		}
++  .rel.ctors     : { *(.rel.ctors)	}
++  .rela.ctors    : { *(.rela.ctors)	}
++  .rel.dtors     : { *(.rel.dtors)	}
++  .rela.dtors    : { *(.rela.dtors)	}
++  .rel.bss       : { *(.rel.bss)		}
++  .rela.bss      : { *(.rela.bss)		}
++  .rel.plt       : { *(.rel.plt)		}
++  .rela.plt      : { *(.rela.plt)		}
++  .init          : { *(.init)	}
++  .plt : { *(.plt) }
++  .text      :
++  {
++    cpu/mpc83xx/start.o	(.text)
++    *(.text)
++    *(.fixup)
++    *(.got1)
++    . = ALIGN(16);
++    *(.rodata)
++    *(.rodata1)
++    *(.rodata.str1.4)
++    *(.eh_frame)
++  }
++  .fini      : { *(.fini)    } =0
++  .ctors     : { *(.ctors)   }
++  .dtors     : { *(.dtors)   }
++
++  /* Read-write section, merged into data segment: */
++  . = (. + 0x0FFF) & 0xFFFFF000;
++  _erotext = .;
++  PROVIDE (erotext = .);
++  .reloc   :
++  {
++    *(.got)
++    _GOT2_TABLE_ = .;
++    *(.got2)
++    _FIXUP_TABLE_ = .;
++    *(.fixup)
++  }
++  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++  .data    :
++  {
++    *(.data)
++    *(.data1)
++    *(.sdata)
++    *(.sdata2)
++    *(.dynamic)
++    CONSTRUCTORS
++  }
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  . = .;
++  __u_boot_cmd_start = .;
++  .u_boot_cmd : { *(.u_boot_cmd) }
++  __u_boot_cmd_end = .;
++
++
++  . = .;
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  . = ALIGN(4096);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(4096);
++  __init_end = .;
++
++  __bss_start = .;
++  .bss       :
++  {
++   *(.sbss) *(.scommon)
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++  }
++  _end = . ;
++  PROVIDE (end = .);
++}
++ENTRY(_start)
+diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
+new file mode 100644
+index 0000000..ebbc7b0
+--- /dev/null
++++ b/include/configs/MPC8323ERDB.h
+@@ -0,0 +1,589 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#undef DEBUG
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_E300		1	/* E300 family */
++#define CONFIG_QE		1	/* Has QE */
++#define CONFIG_MPC83XX		1	/* MPC83xx family */
++#define CONFIG_MPC832X		1	/* MPC832x CPU specific */
++
++/*
++ * System Clock Setup
++ */
++#define CONFIG_83XX_CLKIN	66666667	/* in Hz */
++
++#ifndef CONFIG_SYS_CLK_FREQ
++#define CONFIG_SYS_CLK_FREQ	66666667
++#endif
++
++/*
++ * Hardware Reset Configuration Word
++ */
++#define CFG_HRCW_LOW (\
++	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
++	HRCWL_DDR_TO_SCB_CLK_2X1 |\
++	HRCWL_VCO_1X2 |\
++	HRCWL_CSB_TO_CLKIN_2X1 |\
++	HRCWL_CORE_TO_CSB_2_5X1 |\
++	HRCWL_CE_PLL_VCO_DIV_2 |\
++	HRCWL_CE_PLL_DIV_1X1 |\
++	HRCWL_CE_TO_PLL_1X3)
++
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_HOST |\
++	HRCWH_PCI1_ARBITER_ENABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0X00000100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT |\
++	HRCWH_BIG_ENDIAN |\
++	HRCWH_LALE_NORMAL)
++
++/*
++ * System IO Config
++ */
++#define CFG_SICRL		0x00000000
++
++#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
++
++/*
++ * IMMR new address
++ */
++#define CFG_IMMR		0xE0000000
++
++/*
++ * DDR Setup
++ */
++#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
++#define CFG_SDRAM_BASE		CFG_DDR_BASE
++#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
++#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
++
++#undef CONFIG_SPD_EEPROM
++#if defined(CONFIG_SPD_EEPROM)
++/* Determine DDR configuration from I2C interface
++ */
++#define SPD_EEPROM_ADDRESS	0x51	/* DDR SODIMM */
++#else
++/* Manually set up DDR parameters
++ */
++#define CFG_DDR_SIZE		64	/* MB */
++#define CFG_DDR_CS0_CONFIG	0x80840101
++#define CFG_DDR_TIMING_0	0x00220802
++#define CFG_DDR_TIMING_1	0x3935d322
++#define CFG_DDR_TIMING_2	0x0f9048ca
++#define CFG_DDR_TIMING_3	0x00000000
++#define CFG_DDR_CLK_CNTL	0x02000000
++#define CFG_DDR_MODE		0x44400232
++#define CFG_DDR_MODE2		0x8000c000
++#define CFG_DDR_INTERVAL	0x03200064
++#define CFG_DDR_CS0_BNDS	0x00000003
++#define CFG_DDR_SDRAM_CFG	0x43080000
++#define CFG_DDR_SDRAM_CFG2	0x00401000
++#endif
++
++/*
++ * Memory test
++ */
++#undef CFG_DRAM_TEST		/* memory test, takes time */
++#define CFG_MEMTEST_START	0x00030000	/* memtest region */
++#define CFG_MEMTEST_END		0x03f00000
++
++/*
++ * The reserved memory
++ */
++#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
++
++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
++#define CFG_RAMBOOT
++#else
++#undef  CFG_RAMBOOT
++#endif
++
++#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
++#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
++
++/*
++ * Initial RAM Base Address Setup
++ */
++#define CFG_INIT_RAM_LOCK	1
++#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
++#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
++#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++/*
++ * Local Bus Configuration & Clock Setup
++ */
++#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
++#define CFG_LBC_LBCR		0x00000000
++
++/*
++ * FLASH on the Local Bus
++ */
++#define CFG_FLASH_CFI		/* use the Common Flash Interface */
++#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
++#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
++#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
++
++#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
++#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
++
++#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
++			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
++			BR_V)			/* valid */
++#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
++
++#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
++#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
++
++#undef CFG_FLASH_CHECKSUM
++
++/*
++ * SDRAM on the Local Bus
++ */
++#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */
++
++#ifdef CFG_LB_SDRAM
++#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
++#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
++
++#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
++#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
++
++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
++/*
++ * Base Register 2 and Option Register 2 configure SDRAM.
++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
++ *
++ * For BR2, need:
++ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
++ *    port size = 32-bits = BR2[19:20] = 11
++ *    no parity checking = BR2[21:22] = 00
++ *    SDRAM for MSEL = BR2[24:26] = 011
++ *    Valid = BR[31] = 1
++ *
++ * 0    4    8    12   16   20   24   28
++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
++ *
++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
++ * the top 17 bits of BR2.
++ */
++
++#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
++
++/*
++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
++ *
++ * For OR2, need:
++ *    64MB mask for AM, OR2[0:7] = 1111 1100
++ *                 XAM, OR2[17:18] = 11
++ *    9 columns OR2[19-21] = 010
++ *    13 rows   OR2[23-25] = 100
++ *    EAD set for extra time OR[31] = 1
++ *
++ * 0    4    8    12   16   20   24   28
++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
++ */
++
++#define CFG_OR2_PRELIM	0xfc006901
++
++#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
++#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
++
++/*
++ * LSDMR masks
++ */
++#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
++
++#define CFG_LBC_LSDMR_COMMON	0x0063b723
++
++/*
++ * SDRAM Controller configuration sequence.
++ */
++#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_PCHALL)
++#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_MRW)
++#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_NORMAL)
++
++#endif
++
++/*
++ * Windows to access PIB via local bus
++ */
++#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
++#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
++
++/*
++ * Serial Port
++ */
++#define CONFIG_CONS_INDEX	1
++#undef CONFIG_SERIAL_SOFTWARE_FIFO
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE	1
++#define CFG_NS16550_CLK		get_bus_freq(0)
++
++#define CFG_BAUDRATE_TABLE  \
++	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
++
++#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
++#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
++
++/* Use the HUSH parser */
++#define CFG_HUSH_PARSER
++#ifdef CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2 "> "
++#endif
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE	1
++#define CONFIG_OF_BOARD_SETUP	1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE	8192
++
++#define OF_CPU			"PowerPC,8323@0"
++#define OF_SOC			"soc8323@e0000000"
++#define OF_TBCLK		(bd->bi_busfreq / 4)
++#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
++
++/* I2C */
++#define CONFIG_HARD_I2C		/* I2C with hardware support */
++#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
++#define CONFIG_FSL_I2C
++#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
++#define CFG_I2C_SLAVE	0x7F
++#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
++#define CFG_I2C_OFFSET	0x3000
++
++/*
++ * Config on-board RTC
++ */
++#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
++#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
++
++/*
++ * General PCI
++ * Addresses are mapped 1-1.
++ */
++#define CFG_PCI_MEM_BASE	0x80000000
++#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
++#define CFG_PCI_MEM_SIZE	0x10000000	/* 256M */
++#define CFG_PCI_MMIO_BASE	0x90000000
++#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
++#define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
++#define CFG_PCI_IO_BASE		0xd0000000
++#define CFG_PCI_IO_PHYS		CFG_PCI_IO_BASE
++#define CFG_PCI_IO_SIZE		0x04000000	/* 64M */
++
++#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
++#define CFG_PCI_SLV_MEM_BUS	0x00000000
++#define CFG_PCI_SLV_MEM_SIZE	0x80000000
++
++
++#ifdef CONFIG_PCI
++
++#define CONFIG_NET_MULTI
++#define CONFIG_PCI_PNP		/* do pci plug-and-play */
++
++#undef CONFIG_EEPRO100
++#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
++#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
++
++#endif	/* CONFIG_PCI */
++
++
++#ifndef CONFIG_NET_MULTI
++#define CONFIG_NET_MULTI	1
++#endif
++
++/*
++ * QE UEC ethernet configuration
++ */
++#define CONFIG_UEC_ETH
++#define CONFIG_ETHPRIME		"Freescale GETH"
++
++#define CONFIG_UEC_ETH1		/* ETH3 */
++
++#ifdef CONFIG_UEC_ETH1
++#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
++#define CFG_UEC1_RX_CLK		QE_CLK9
++#define CFG_UEC1_TX_CLK		QE_CLK10
++#define CFG_UEC1_ETH_TYPE	FAST_ETH
++#define CFG_UEC1_PHY_ADDR	4
++#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
++#endif
++
++#define CONFIG_UEC_ETH2		/* ETH4 */
++
++#ifdef CONFIG_UEC_ETH2
++#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
++#define CFG_UEC2_RX_CLK		QE_CLK16
++#define CFG_UEC2_TX_CLK		QE_CLK3
++#define CFG_UEC2_ETH_TYPE	FAST_ETH
++#define CFG_UEC2_PHY_ADDR	0
++#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
++#endif
++
++/*
++ * Environment
++ */
++#ifndef CFG_RAMBOOT
++	#define CFG_ENV_IS_IN_FLASH	1
++	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
++	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
++	#define CFG_ENV_SIZE		0x2000
++#else
++	#define CFG_NO_FLASH		1	/* Flash is not usable now */
++	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
++	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
++	#define CFG_ENV_SIZE		0x2000
++#endif
++
++#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
++#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
++
++#if defined(CFG_RAMBOOT)
++#if defined(CONFIG_PCI)
++#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_PCI \
++				| CFG_CMD_I2C) \
++				& \
++				~(CFG_CMD_ENV \
++				| CFG_CMD_LOADS))
++#else
++#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C) \
++				& \
++				~(CFG_CMD_ENV \
++				| CFG_CMD_LOADS))
++#endif
++#else
++#if defined(CONFIG_PCI)
++#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
++				| CFG_CMD_PCI \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C)
++#else
++#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C  )
++#endif
++#endif
++
++#include <cmd_confdefs.h>
++
++#undef CONFIG_WATCHDOG		/* watchdog disabled */
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP		/* undef to save memory */
++#define CFG_LOAD_ADDR		0x2000000	/* default load address */
++#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
++#else
++	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
++#endif
++
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
++#define CFG_MAXARGS	16		/* max number of command args */
++#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
++#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
++
++/*
++ * Core HID Setup
++ */
++#define CFG_HID0_INIT		0x000000000
++#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
++#define CFG_HID2		HID2_HBE
++
++/*
++ * Cache Config
++ */
++#define CFG_DCACHE_SIZE		16384
++#define CFG_CACHELINE_SIZE	32
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
++#endif
++
++/*
++ * MMU Setup
++ */
++
++/* DDR: cache cacheable */
++#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT0L	CFG_IBAT0L
++#define CFG_DBAT0U	CFG_IBAT0U
++
++/* IMMRBAR & PCI IO: cache-inhibit and guarded */
++#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
++#define CFG_DBAT1L	CFG_IBAT1L
++#define CFG_DBAT1U	CFG_IBAT1U
++
++/* FLASH: icache cacheable, but dcache-inhibit and guarded */
++#define CFG_IBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT2U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
++#define CFG_DBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT2U	CFG_IBAT2U
++
++#define CFG_IBAT3L	(0)
++#define CFG_IBAT3U	(0)
++#define CFG_DBAT3L	CFG_IBAT3L
++#define CFG_DBAT3U	CFG_IBAT3U
++
++/* Stack in dcache: cacheable, no memory coherence */
++#define CFG_IBAT4L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
++#define CFG_IBAT4U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT4L	CFG_IBAT4L
++#define CFG_DBAT4U	CFG_IBAT4U
++
++#ifdef CONFIG_PCI
++/* PCI MEM space: cacheable */
++#define CFG_IBAT5L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT5U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT5L	CFG_IBAT5L
++#define CFG_DBAT5U	CFG_IBAT5U
++/* PCI MMIO space: cache-inhibit and guarded */
++#define CFG_IBAT6L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT6U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++#else
++#define CFG_IBAT5L	(0)
++#define CFG_IBAT5U	(0)
++#define CFG_IBAT6L	(0)
++#define CFG_IBAT6U	(0)
++#define CFG_DBAT5L	CFG_IBAT5L
++#define CFG_DBAT5U	CFG_IBAT5U
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++#endif
++
++/* Nothing in BAT7 */
++#define CFG_IBAT7L	(0)
++#define CFG_IBAT7U	(0)
++#define CFG_DBAT7L	CFG_IBAT7L
++#define CFG_DBAT7U	CFG_IBAT7U
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM	0x02	/* Software reboot */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
++#endif
++
++/*
++ * Environment Configuration
++ */
++
++#define CONFIG_ENV_OVERWRITE
++
++#if defined(CONFIG_UEC_ETH)
++#define CONFIG_ETHADDR	00:04:9f:ef:03:01
++#define CONFIG_HAS_ETH1
++#define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
++#endif
++
++#define CONFIG_BAUDRATE	115200
++
++#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
++
++#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
++#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
++
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++   "netdev=eth0\0"							\
++   "consoledev=ttyS0\0"							\
++   "bootfile=uImage\0"							\
++   "ramdiskaddr=1000000\0"						\
++   "ramdiskfile=rootfs.ext2.gz.uboot\0"					\
++   "fdtaddr=400000\0"							\
++   "fdtfile=mpc832x_rdb.dtb\0"						\
++   ""
++
++#define CONFIG_NFSBOOTCOMMAND						\
++   "setenv bootargs root=/dev/nfs rw "					\
++      "nfsroot=$serverip:$rootpath "					\
++      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr - $fdtaddr"
++
++#define CONFIG_RAMBOOTCOMMAND						\
++   "setenv bootargs root=/dev/ram rw "					\
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $ramdiskaddr $ramdiskfile;"					\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr $ramdiskaddr $fdtaddr"
++
++
++#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
++
++#endif	/* __CONFIG_H */
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch
new file mode 100644
index 0000000000..ad2ff243e8
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch
@@ -0,0 +1,62 @@
+21fb83dfa2dcba7982eeb54f4ca7bc1056582c1e
+diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
+index f640c81..c44a5be 100644
+--- a/drivers/qe/uec.c
++++ b/drivers/qe/uec.c
+@@ -1122,7 +1122,7 @@ static int uec_send(struct eth_device* dev, volatile void *buf, int len)
+ 	uec_private_t		*uec;
+ 	ucc_fast_private_t	*uccf;
+ 	volatile qe_bd_t	*bd;
+-	volatile u16		status;
++	u16			status;
+ 	int			i;
+ 	int			result = 0;
+ 
+@@ -1131,7 +1131,7 @@ static int uec_send(struct eth_device* dev, volatile void *buf, int len)
+ 	bd = uec->txBd;
+ 
+ 	/* Find an empty TxBD */
+-	for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) {
++	for (i = 0; bd->status & TxBD_READY; i++) {
+ 		if (i > 0x100000) {
+ 			printf("%s: tx buffer not ready\n", dev->name);
+ 			return result;
+@@ -1150,13 +1150,11 @@ static int uec_send(struct eth_device* dev, volatile void *buf, int len)
+ 	ucc_fast_transmit_on_demand(uccf);
+ 
+ 	/* Wait for buffer to be transmitted */
+-	status = BD_STATUS(bd);
+-	for (i = 0; status & TxBD_READY; i++) {
++	for (i = 0; bd->status & TxBD_READY; i++) {
+ 		if (i > 0x100000) {
+ 			printf("%s: tx error\n", dev->name);
+ 			return result;
+ 		}
+-		status = BD_STATUS(bd);
+ 	}
+ 
+ 	/* Ok, the buffer be transimitted */
+@@ -1171,12 +1169,12 @@ static int uec_recv(struct eth_device* dev)
+ {
+ 	uec_private_t		*uec = dev->priv;
+ 	volatile qe_bd_t	*bd;
+-	volatile u16		status;
++	u16			status;
+ 	u16			len;
+ 	u8			*data;
+ 
+ 	bd = uec->rxBd;
+-	status = BD_STATUS(bd);
++	status = bd->status;
+ 
+ 	while (!(status & RxBD_EMPTY)) {
+ 		if (!(status & RxBD_ERROR)) {
+@@ -1190,7 +1188,7 @@ static int uec_recv(struct eth_device* dev)
+ 		BD_LENGTH_SET(bd, 0);
+ 		BD_STATUS_SET(bd, status | RxBD_EMPTY);
+ 		BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
+-		status = BD_STATUS(bd);
++		status = bd->status;
+ 	}
+ 	uec->rxBd = bd;
+ 
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch
new file mode 100644
index 0000000000..9e2829bd3e
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch
@@ -0,0 +1,15 @@
+123b7d94ab4fa50a62aa9c0c0202d4e2c99a14c8
+diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
+index aea455b..a327a34 100644
+--- a/drivers/qe/uec.c
++++ b/drivers/qe/uec.c
+@@ -567,9 +567,6 @@ static void phy_change(struct eth_device *dev)
+ 
+ 	uec_regs = uec->uec_regs;
+ 
+-	/* Delay 5s to give the PHY a chance to change the register state */
+-	udelay(5000000);
+-
+ 	/* Update the link, speed, duplex */
+ 	result = uec->mii_info->phyinfo->read_status(uec->mii_info);
+ 
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch
new file mode 100644
index 0000000000..5f3e1f7aaa
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch
@@ -0,0 +1,32020 @@
+This patch, when applied against the external pristine
+tarball u-boot-1.1.6.tar.bz2, makes the u-boot code match the git tree
+with sha1 dd520bf314c7add4183c5191692180f576f96b60,
+in the repository http://opensource.freescale.com/pub/scm/u-boot-83xx.git.
+This git tag is identified for this code baseline: u-boot-1.1.6-fsl-1 
+
+The patch includes support changes for mpc8349itx, mpc8349emds, and mpc8360emds
+as well as many other changes as of November 30, 2006.
+
+diff -Naupr u-boot-1.1.6/board/amcc/yellowstone/yellowstone.c u-boot-1.1.6-fsl-1/board/amcc/yellowstone/yellowstone.c
+--- u-boot-1.1.6/board/amcc/yellowstone/yellowstone.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/amcc/yellowstone/yellowstone.c	2006-11-30 12:34:13.000000000 -0600
+@@ -552,3 +552,9 @@ void hw_watchdog_reset(void)
+ 
+ }
+ #endif
++
++void board_reset(void)
++{
++	/* give reset to BCSR */
++	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
++}
+diff -Naupr u-boot-1.1.6/board/amcc/yosemite/yosemite.c u-boot-1.1.6-fsl-1/board/amcc/yosemite/yosemite.c
+--- u-boot-1.1.6/board/amcc/yosemite/yosemite.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/amcc/yosemite/yosemite.c	2006-11-30 12:34:13.000000000 -0600
+@@ -548,3 +548,9 @@ void hw_watchdog_reset(void)
+ 
+ }
+ #endif
++
++void board_reset(void)
++{
++	/* give reset to BCSR */
++	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
++}
+diff -Naupr u-boot-1.1.6/board/bc3450/bc3450.c u-boot-1.1.6-fsl-1/board/bc3450/bc3450.c
+--- u-boot-1.1.6/board/bc3450/bc3450.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/bc3450/bc3450.c	2006-11-10 11:24:28.000000000 -0600
+@@ -295,7 +295,6 @@ void pci_init_board(void)
+ #endif
+ 
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+-#define GPIO_PSC1_4	0x01000000UL
+ 
+ void init_ide_reset (void)
+ {
+@@ -311,9 +310,9 @@ void ide_set_reset (int idereset)
+ 	debug ("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
+ 	}
+ }
+ #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/cfm_flash.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/cfm_flash.c
+--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/cfm_flash.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/cfm_flash.c	2006-12-06 10:33:49.000000000 -0600
+@@ -60,7 +60,7 @@ void cfm_flash_init (flash_info_t * info
+ 	MCFCFM_MCR = 0;
+ 	MCFCFM_CLKD = CFM_CLK;
+ 	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
+-	 	CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
++		CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+ 		CFG_CLK);
+ 	MCFCFM_SACC = 0;
+ 	MCFCFM_DACC = 0;
+diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c	2006-12-06 10:33:49.000000000 -0600
+@@ -50,13 +50,13 @@ long int initdram (int board_type)
+ 
+ 		MCFSDRAMC_DACR0 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
+ 					| MCFSDRAMC_DACR_CASL(1)
+- 					| MCFSDRAMC_DACR_CBM(3)
++					| MCFSDRAMC_DACR_CBM(3)
+ 					| MCFSDRAMC_DACR_PS_16);
+ 
+ 		MCFSDRAMC_DMR0 =	MCFSDRAMC_DMR_BAM_16M
+ 					| MCFSDRAMC_DMR_V;
+ 
+-		MCFSDRAMC_DACR0 |= 	MCFSDRAMC_DACR_IP;
++		MCFSDRAMC_DACR0 |=	MCFSDRAMC_DACR_IP;
+ 
+ 		*(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
+ 		MCFSDRAMC_DACR0 |=	MCFSDRAMC_DACR_RE;
+@@ -70,10 +70,10 @@ long int initdram (int board_type)
+ 	#ifdef CFG_SDRAM_BASE1
+ 		MCFSDRAMC_DACR1 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
+ 					| MCFSDRAMC_DACR_CASL(1)
+- 					| MCFSDRAMC_DACR_CBM(3)
++					| MCFSDRAMC_DACR_CBM(3)
+ 					| MCFSDRAMC_DACR_PS_16;
+ 
+-		MCFSDRAMC_DMR1 = 	MCFSDRAMC_DMR_BAM_16M
++		MCFSDRAMC_DMR1 =	MCFSDRAMC_DMR_BAM_16M
+ 					| MCFSDRAMC_DMR_V;
+ 
+ 		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_IP;
+@@ -82,7 +82,7 @@ long int initdram (int board_type)
+ 		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_RE;
+ 		for (i=0; i < 2000; i++)
+ 			asm(" nop");
+-		MCFSDRAMC_DACR1 |= 	MCFSDRAMC_DACR_IMRS;
++		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_IMRS;
+ 		*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
+ 		size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+ 	#endif
+diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/flash.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/flash.c
+--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/flash.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/flash.c	2006-12-06 10:33:49.000000000 -0600
+@@ -256,7 +256,7 @@ int flash_erase (flash_info_t * info, in
+ 		enable_interrupts ();
+ 
+ 	if (cflag)
+-  		icache_enable ();
++		icache_enable ();
+ 
+ 	return rc;
+ }
+diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/u-boot.lds u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/u-boot.lds
+--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/u-boot.lds	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/u-boot.lds	2006-12-06 10:33:49.000000000 -0600
+@@ -34,11 +34,11 @@ SECTIONS
+   .dynsym        : { *(.dynsym)		}
+   .dynstr        : { *(.dynstr)		}
+   .rel.text      : { *(.rel.text)		}
+-  .rela.text     : { *(.rela.text) 	}
++  .rela.text     : { *(.rela.text)	}
+   .rel.data      : { *(.rel.data)		}
+-  .rela.data     : { *(.rela.data) 	}
+-  .rel.rodata    : { *(.rel.rodata) 	}
+-  .rela.rodata   : { *(.rela.rodata) 	}
++  .rela.data     : { *(.rela.data)	}
++  .rel.rodata    : { *(.rel.rodata)	}
++  .rela.rodata   : { *(.rela.rodata)	}
+   .rel.got       : { *(.rel.got)		}
+   .rela.got      : { *(.rela.got)		}
+   .rel.ctors     : { *(.rel.ctors)	}
+diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.c
+--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.c	2006-12-06 10:33:49.000000000 -0600
+@@ -66,7 +66,7 @@ int init_vcxk(void)
+ 	return 1;
+ }
+ 
+-void 	vcxk_loadimage(ulong source)
++void	vcxk_loadimage(ulong source)
+ {
+ 	int cnt;
+ 	vcxk_acknowledge_wait();
+diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.h u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.h
+--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.h	2006-12-06 10:33:49.000000000 -0600
+@@ -25,24 +25,24 @@
+ #define __VCXK_H_
+ 
+ extern int init_vcxk(void);
+-void 	vcxk_loadimage(ulong source);
++void	vcxk_loadimage(ulong source);
+ 
+ #define VIDEO_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
+-#define VIDEO_ACKNOWLEDGE_DDR 	MCFGPTB_GPTDDR
++#define VIDEO_ACKNOWLEDGE_DDR	MCFGPTB_GPTDDR
+ #define VIDEO_ACKNOWLEDGE_PIN	0x0001
+ 
+-#define VIDEO_ENABLE_PORT    	MCFGPTB_GPTPORT
+-#define VIDEO_ENABLE_DDR 	MCFGPTB_GPTDDR
++#define VIDEO_ENABLE_PORT	MCFGPTB_GPTPORT
++#define VIDEO_ENABLE_DDR	MCFGPTB_GPTDDR
+ #define VIDEO_ENABLE_PIN	0x0002
+ 
+-#define VIDEO_REQUEST_PORT   	MCFGPTB_GPTPORT
+-#define VIDEO_REQUEST_DDR 	MCFGPTB_GPTDDR
++#define VIDEO_REQUEST_PORT	MCFGPTB_GPTPORT
++#define VIDEO_REQUEST_DDR	MCFGPTB_GPTDDR
+ #define VIDEO_REQUEST_PIN	0x0004
+ 
+ #define VIDEO_Invert_CFG	MCFGPIO_PEPAR
+ #define VIDEO_Invert_IO		MCFGPIO_PEPAR_PEPA2
+-#define VIDEO_INVERT_PORT   	MCFGPIO_PORTE
+-#define VIDEO_INVERT_DDR 	MCFGPIO_DDRE
++#define VIDEO_INVERT_PORT	MCFGPIO_PORTE
++#define VIDEO_INVERT_DDR	MCFGPIO_DDRE
+ #define VIDEO_INVERT_PIN	MCFGPIO_PORT2
+ 
+ #endif
+diff -Naupr u-boot-1.1.6/board/emk/top5200/top5200.c u-boot-1.1.6-fsl-1/board/emk/top5200/top5200.c
+--- u-boot-1.1.6/board/emk/top5200/top5200.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/emk/top5200/top5200.c	2006-12-06 10:33:49.000000000 -0600
+@@ -186,13 +186,11 @@ void pci_init_board(void)
+  *****************************************************************************/
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+ 
+-#define GPIO_PSC1_4	0x01000000UL
+-
+ void init_ide_reset (void)
+ {
+ 	debug ("init_ide_reset\n");
+ 
+-    	/* Configure PSC1_4 as GPIO output for ATA reset */
++	/* Configure PSC1_4 as GPIO output for ATA reset */
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+ }
+@@ -202,9 +200,9 @@ void ide_set_reset (int idereset)
+ 	debug ("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
+ 	}
+ }
+ #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+diff -Naupr u-boot-1.1.6/board/esd/cpci5200/cpci5200.c u-boot-1.1.6-fsl-1/board/esd/cpci5200/cpci5200.c
+--- u-boot-1.1.6/board/esd/cpci5200/cpci5200.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/esd/cpci5200/cpci5200.c	2006-12-06 10:33:49.000000000 -0600
+@@ -191,16 +191,13 @@ static struct pci_controller hose;
+ 
+ extern void pci_mpc5xxx_init(struct pci_controller *);
+ 
+-void pci_init_board(void
+-    ) {
++void pci_init_board(void) {
+ 	pci_mpc5xxx_init(&hose);
+ }
+ #endif
+ 
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+ 
+-#define GPIO_PSC1_4	0x01000000UL
+-
+ void init_ide_reset(void)
+ {
+ 	debug("init_ide_reset\n");
+@@ -215,9 +212,9 @@ void ide_set_reset(int idereset)
+ 	debug("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
+ 	}
+ }
+ #endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+@@ -242,7 +239,7 @@ void init_ata_reset(void)
+ 	debug("init_ata_reset\n");
+ 
+ 	/* Configure GPIO_WU6 as GPIO output for ATA reset */
+-	*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
+ 	__asm__ volatile ("sync");
+diff -Naupr u-boot-1.1.6/board/esd/pf5200/pf5200.c u-boot-1.1.6-fsl-1/board/esd/pf5200/pf5200.c
+--- u-boot-1.1.6/board/esd/pf5200/pf5200.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/esd/pf5200/pf5200.c	2006-12-06 10:33:49.000000000 -0600
+@@ -191,16 +191,13 @@ static struct pci_controller hose;
+ 
+ extern void pci_mpc5xxx_init(struct pci_controller *);
+ 
+-void pci_init_board(void
+-    ) {
++void pci_init_board(void) {
+ 	pci_mpc5xxx_init(&hose);
+ }
+ #endif
+ 
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+ 
+-#define GPIO_PSC1_4	0x01000000UL
+-
+ void init_ide_reset(void)
+ {
+ 	debug("init_ide_reset\n");
+@@ -215,9 +212,9 @@ void ide_set_reset(int idereset)
+ 	debug("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
+ 	}
+ }
+ #endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+@@ -242,7 +239,7 @@ void init_power_switch(void)
+ 	debug("init_power_switch\n");
+ 
+ 	/* Configure GPIO_WU6 as GPIO output for ATA reset */
+-	*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
+ 	__asm__ volatile ("sync");
+@@ -272,10 +269,10 @@ void power_set_reset(int power)
+ 	debug("ide_set_reset(%d)\n", power);
+ 
+ 	if (power) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_WU6;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6;
+ 		*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
+ 		if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) ==
+ 		    0) {
+ 			*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |=
+diff -Naupr u-boot-1.1.6/board/icecube/icecube.c u-boot-1.1.6-fsl-1/board/icecube/icecube.c
+--- u-boot-1.1.6/board/icecube/icecube.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/icecube/icecube.c	2006-12-06 10:33:49.000000000 -0600
+@@ -29,6 +29,10 @@
+ #include <pci.h>
+ #include <asm/processor.h>
+ 
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
+ #if defined(CONFIG_LITE5200B)
+ #include "mt46v32m16.h"
+ #else
+@@ -308,17 +312,15 @@ void pci_init_board(void)
+ 
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+ 
+-#define GPIO_PSC1_4	0x01000000UL
+-
+ void init_ide_reset (void)
+ {
+ 	debug ("init_ide_reset\n");
+ 
+-    	/* Configure PSC1_4 as GPIO output for ATA reset */
++	/* Configure PSC1_4 as GPIO output for ATA reset */
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+ 	/* Deassert reset */
+-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
+ }
+ 
+ void ide_set_reset (int idereset)
+@@ -326,11 +328,19 @@ void ide_set_reset (int idereset)
+ 	debug ("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 		/* Make a delay. MPC5200 spec says 25 usec min */
+ 		udelay(500000);
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
+ 	}
+ }
+ #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++	ft_cpu_setup(blob, bd);
++}
++#endif
+diff -Naupr u-boot-1.1.6/board/inka4x0/inka4x0.c u-boot-1.1.6-fsl-1/board/inka4x0/inka4x0.c
+--- u-boot-1.1.6/board/inka4x0/inka4x0.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/inka4x0/inka4x0.c	2006-11-10 11:24:28.000000000 -0600
+@@ -173,9 +173,6 @@ void flash_preinit(void)
+ 	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ }
+ 
+-#define GPIO_WKUP_7	0x80000000UL
+-#define GPIO_PSC3_9	0x04000000UL
+-
+ int misc_init_f (void)
+ {
+ 	uchar tmp[10];
+@@ -218,13 +215,13 @@ int misc_init_f (void)
+ 	*(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
+ 
+ 	/* Set LR mirror bit because it is low-active */
+-	*(vu_long *)MPC5XXX_WU_GPIO_DATA    |= GPIO_WKUP_7;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O    |= GPIO_WKUP_7;
+ 	/*
+ 	 * Reset Coral-P graphics controller
+ 	 */
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC3_9;
+-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC3_9;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC3_9;
+ 	return 0;
+ }
+ 
+@@ -241,8 +238,6 @@ void pci_init_board(void)
+ 
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+ 
+-#define GPIO_PSC1_4	0x01000000UL
+-
+ void init_ide_reset (void)
+ {
+ 	debug ("init_ide_reset\n");
+@@ -251,7 +246,7 @@ void init_ide_reset (void)
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+ 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+ 	/* Deassert reset */
+-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
+ }
+ 
+ void ide_set_reset (int idereset)
+@@ -259,11 +254,11 @@ void ide_set_reset (int idereset)
+ 	debug ("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 		/* Make a delay. MPC5200 spec says 25 usec min */
+ 		udelay(500000);
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
+ 	}
+ }
+ #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+diff -Naupr u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds
+--- u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds	2006-12-06 10:33:49.000000000 -0600
+@@ -43,11 +43,11 @@ SECTIONS
+   .dynsym        : { *(.dynsym)		}
+   .dynstr        : { *(.dynstr)		}
+   .rel.text      : { *(.rel.text)		}
+-  .rela.text     : { *(.rela.text) 	}
++  .rela.text     : { *(.rela.text)	}
+   .rel.data      : { *(.rel.data)		}
+-  .rela.data     : { *(.rela.data) 	}
+-  .rel.rodata    : { *(.rel.rodata) 	}
+-  .rela.rodata   : { *(.rela.rodata) 	}
++  .rela.data     : { *(.rela.data)	}
++  .rel.rodata    : { *(.rel.rodata)	}
++  .rela.rodata   : { *(.rela.rodata)	}
+   .rel.got       : { *(.rel.got)		}
+   .rela.got      : { *(.rela.got)		}
+   .rel.ctors     : { *(.rel.ctors)	}
+diff -Naupr u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds.debug u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds.debug
+--- u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds.debug	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds.debug	2006-12-06 10:33:49.000000000 -0600
+@@ -43,11 +43,11 @@ SECTIONS
+   .dynsym        : { *(.dynsym)		}
+   .dynstr        : { *(.dynstr)		}
+   .rel.text      : { *(.rel.text)		}
+-  .rela.text     : { *(.rela.text) 	}
++  .rela.text     : { *(.rela.text)	}
+   .rel.data      : { *(.rel.data)		}
+-  .rela.data     : { *(.rela.data) 	}
+-  .rel.rodata    : { *(.rel.rodata) 	}
+-  .rela.rodata   : { *(.rela.rodata) 	}
++  .rela.data     : { *(.rela.data)	}
++  .rel.rodata    : { *(.rel.rodata)	}
++  .rela.rodata   : { *(.rela.rodata)	}
+   .rel.got       : { *(.rel.got)		}
+   .rela.got      : { *(.rela.got)		}
+   .rel.ctors     : { *(.rel.ctors)	}
+diff -Naupr u-boot-1.1.6/board/MAI/AmigaOneG3SE/articiaS_pci.c u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/articiaS_pci.c
+--- u-boot-1.1.6/board/MAI/AmigaOneG3SE/articiaS_pci.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/articiaS_pci.c	2006-12-06 10:33:49.000000000 -0600
+@@ -368,11 +368,11 @@ void articiaS_pci_init (void)
+ 	if (articiaS_init_vga() == -1)
+ 	{
+ 	    /* If the VGA didn't init and we have stdout set to VGA, reset to serial */
+-/* 	    s = getenv("stdout"); */
+-/* 	    if (s && strcmp(s, "vga") == 0) */
+-/* 	    { */
+-/* 		setenv("stdout", "serial"); */
+-/* 	    } */
++/*	    s = getenv("stdout"); */
++/*	    if (s && strcmp(s, "vga") == 0) */
++/*	    { */
++/*		setenv("stdout", "serial"); */
++/*	    } */
+ 	}
+     }
+     pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF);
+diff -Naupr u-boot-1.1.6/board/MAI/AmigaOneG3SE/enet.c u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/enet.c
+--- u-boot-1.1.6/board/MAI/AmigaOneG3SE/enet.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/enet.c	2006-12-06 10:33:49.000000000 -0600
+@@ -41,57 +41,57 @@
+ 
+ /* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */
+ 
+-#define TotalReset 		(0<<11)
+-#define SelectWindow 		(1<<11)
+-#define StartCoax 		(2<<11)
+-#define RxDisable 		(3<<11)
+-#define RxEnable 		(4<<11)
+-#define RxReset 		(5<<11)
+-#define UpStall 		(6<<11)
+-#define UpUnstall 		(6<<11)+1
+-#define DownStall 		(6<<11)+2
+-#define DownUnstall 		(6<<11)+3
+-#define RxDiscard 		(8<<11)
+-#define TxEnable 		(9<<11)
+-#define TxDisable 		(10<<11)
+-#define TxReset 		(11<<11)
+-#define FakeIntr 		(12<<11)
+-#define AckIntr 		(13<<11)
+-#define SetIntrEnb 		(14<<11)
+-#define SetStatusEnb 		(15<<11)
+-#define SetRxFilter 		(16<<11)
+-#define SetRxThreshold 		(17<<11)
+-#define SetTxThreshold 		(18<<11)
+-#define SetTxStart 		(19<<11)
+-#define StartDMAUp 		(20<<11)
+-#define StartDMADown 		(20<<11)+1
++#define TotalReset		(0<<11)
++#define SelectWindow		(1<<11)
++#define StartCoax		(2<<11)
++#define RxDisable		(3<<11)
++#define RxEnable		(4<<11)
++#define RxReset			(5<<11)
++#define UpStall			(6<<11)
++#define UpUnstall		(6<<11)+1
++#define DownStall		(6<<11)+2
++#define DownUnstall		(6<<11)+3
++#define RxDiscard		(8<<11)
++#define TxEnable		(9<<11)
++#define TxDisable		(10<<11)
++#define TxReset			(11<<11)
++#define FakeIntr		(12<<11)
++#define AckIntr			(13<<11)
++#define SetIntrEnb		(14<<11)
++#define SetStatusEnb		(15<<11)
++#define SetRxFilter		(16<<11)
++#define SetRxThreshold		(17<<11)
++#define SetTxThreshold		(18<<11)
++#define SetTxStart		(19<<11)
++#define StartDMAUp		(20<<11)
++#define StartDMADown		(20<<11)+1
+ #define StatsEnable		(21<<11)
+ #define StatsDisable		(22<<11)
+-#define StopCoax 		(23<<11)
+-#define SetFilterBit 		(25<<11)
++#define StopCoax		(23<<11)
++#define SetFilterBit		(25<<11)
+ 
+ /* The SetRxFilter command accepts the following classes */
+ 
+-#define RxStation 		1
++#define RxStation		1
+ #define RxMulticast		2
+ #define RxBroadcast		4
+-#define RxProm 			8
++#define RxProm			8
+ 
+ /* 3Com status word defnitions */
+ 
+-#define IntLatch 		0x0001
+-#define HostError 		0x0002
+-#define TxComplete 		0x0004
+-#define TxAvailable 		0x0008
+-#define RxComplete 		0x0010
+-#define RxEarly 		0x0020
+-#define IntReq 			0x0040
+-#define StatsFull 		0x0080
+-#define DMADone 		(1<<8)
+-#define DownComplete 		(1<<9)
+-#define UpComplete 		(1<<10)
+-#define DMAInProgress 		(1<<11)			/* DMA controller is still busy.*/
+-#define CmdInProgress 		(1<<12)           	/* EL3_CMD is still busy.*/
++#define IntLatch		0x0001
++#define HostError		0x0002
++#define TxComplete		0x0004
++#define TxAvailable		0x0008
++#define RxComplete		0x0010
++#define RxEarly			0x0020
++#define IntReq			0x0040
++#define StatsFull		0x0080
++#define DMADone			(1<<8)
++#define DownComplete		(1<<9)
++#define UpComplete		(1<<10)
++#define DMAInProgress		(1<<11)			/* DMA controller is still busy.*/
++#define CmdInProgress		(1<<12)          	/* EL3_CMD is still busy.*/
+ 
+ /* Polling Registers */
+ 
+@@ -100,17 +100,17 @@
+ 
+ /* Register window 0 offets */
+ 
+-#define Wn0EepromCmd 		10	          	/* Window 0: EEPROM command register. */
+-#define Wn0EepromData 		12             		/* Window 0: EEPROM results register. */
++#define Wn0EepromCmd		10	         	/* Window 0: EEPROM command register. */
++#define Wn0EepromData		12            		/* Window 0: EEPROM results register. */
+ #define IntrStatus		0x0E	                /* Valid in all windows. */
+ 
+ /* Register window 0 EEPROM bits */
+ 
+-#define EEPROM_Read 		0x80
+-#define EEPROM_WRITE 		0x40
+-#define EEPROM_ERASE 		0xC0
+-#define EEPROM_EWENB 		0x30            	/* Enable erasing/writing for 10 msec. */
+-#define EEPROM_EWDIS 		0x00            	/* Disable EWENB before 10 msec timeout. */
++#define EEPROM_Read		0x80
++#define EEPROM_WRITE		0x40
++#define EEPROM_ERASE		0xC0
++#define EEPROM_EWENB		0x30          		/* Enable erasing/writing for 10 msec. */
++#define EEPROM_EWDIS		0x00           		/* Disable EWENB before 10 msec timeout. */
+ 
+ /* EEPROM locations. */
+ 
+@@ -129,13 +129,13 @@
+ 
+ /* Register window 1 offsets, the window used in normal operation */
+ 
+-#define TX_FIFO 		0x10
+-#define RX_FIFO 		0x10
+-#define RxErrors 		0x14
+-#define RxStatus 		0x18
++#define TX_FIFO			0x10
++#define RX_FIFOa		0x10
++#define RxErrors		0x14
++#define RxStatus		0x18
+ #define Timer			0x1A
+-#define TxStatus 		0x1B
+-#define TxFree 			0x1C	 		/* Remaining free bytes in Tx buffer. */
++#define TxStatus		0x1B
++#define TxFree			0x1C			/* Remaining free bytes in Tx buffer. */
+ 
+ /* Register Window 2 */
+ 
+@@ -147,47 +147,47 @@
+ #define Wn3_MAC_Ctrl		6
+ #define Wn3_Options		8
+ 
+-#define BFEXT(value, offset, bitcount)  					\
++#define BFEXT(value, offset, bitcount)					\
+ 	((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
+ 
+ #define BFINS(lhs, rhs, offset, bitcount)                                       \
+-	(((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) |   		\
++	(((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) |			\
+ 	(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
+ 
+ #define RAM_SIZE(v)             BFEXT(v, 0, 3)
+-#define RAM_WIDTH(v)    	BFEXT(v, 3, 1)
+-#define RAM_SPEED(v)    	BFEXT(v, 4, 2)
++#define RAM_WIDTH(v)		BFEXT(v, 3, 1)
++#define RAM_SPEED(v) 	   	BFEXT(v, 4, 2)
+ #define ROM_SIZE(v)             BFEXT(v, 6, 2)
+-#define RAM_SPLIT(v)    	BFEXT(v, 16, 2)
++#define RAM_SPLIT(v)		BFEXT(v, 16, 2)
+ #define XCVR(v)                 BFEXT(v, 20, 4)
+-#define AUTOSELECT(v)   	BFEXT(v, 24, 1)
++#define AUTOSELECT(v)		BFEXT(v, 24, 1)
+ 
+ /* Register Window 4: Xcvr/media bits */
+ 
+-#define Wn4_FIFODiag 		4
+-#define Wn4_NetDiag 		6
++#define Wn4_FIFODiag		4
++#define Wn4_NetDiag		6
+ #define Wn4_PhysicalMgmt	8
+-#define Wn4_Media 		10
++#define Wn4_Media		10
+ 
+-#define Media_SQE 		0x0008     		/* Enable SQE error counting for AUI. */
+-#define Media_10TP 		0x00C0			/* Enable link beat and jabber for 10baseT. */
+-#define Media_Lnk 		0x0080			/* Enable just link beat for 100TX/100FX. */
+-#define Media_LnkBeat 		0x0800
++#define Media_SQE		0x0008		/* Enable SQE error counting for AUI. */
++#define Media_10TP		0x00C0		/* Enable link beat and jabber for 10baseT. */
++#define Media_Lnk		0x0080		/* Enable just link beat for 100TX/100FX. */
++#define Media_LnkBeat		0x0800
+ 
+ /* Register Window 7: Bus Master control */
+ 
+-#define Wn7_MasterAddr 		0
+-#define Wn7_MasterLen 		6
+-#define Wn7_MasterStatus 	12
++#define Wn7_MasterAddr		0
++#define Wn7_MasterLen		6
++#define Wn7_MasterStatus	12
+ 
+ /* Boomerang bus master control registers. */
+ 
+-#define PktStatus 		0x20
++#define PktStatus		0x20
+ #define DownListPtr		0x24
+-#define FragAddr 		0x28
+-#define FragLen 		0x2c
++#define FragAddr		0x28
++#define FragLen			0x2c
+ #define TxFreeThreshold 	0x2f
+-#define UpPktStatus 		0x30
++#define UpPktStatus		0x30
+ #define UpListPtr 		0x38
+ 
+ /* The Rx and Tx descriptor lists. */
+diff -Naupr u-boot-1.1.6/board/MAI/AmigaOneG3SE/Makefile u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/Makefile
+--- u-boot-1.1.6/board/MAI/AmigaOneG3SE/Makefile	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/Makefile	2006-12-06 10:33:49.000000000 -0600
+@@ -30,7 +30,7 @@ endif
+ LIB	= $(obj)lib$(BOARD).a
+ 
+ COBJS	= $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
+-		via686.o i8259.o ../bios_emulator/x86interface.o 	\
++		via686.o i8259.o ../bios_emulator/x86interface.o	\
+ 		../bios_emulator/bios.o ../bios_emulator/glue.o		\
+ 		interrupts.o ps2kbd.o video.o usb_uhci.o enet.o	        \
+ 		../menu/cmd_menu.o cmd_boota.o nvram.o
+diff -Naupr u-boot-1.1.6/board/mcc200/mcc200.c u-boot-1.1.6-fsl-1/board/mcc200/mcc200.c
+--- u-boot-1.1.6/board/mcc200/mcc200.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mcc200/mcc200.c	2006-11-30 12:34:13.000000000 -0600
+@@ -27,6 +27,7 @@
+ #include <common.h>
+ #include <mpc5xxx.h>
+ #include <pci.h>
++#include <asm/processor.h>
+ 
+ /* Two MT48LC8M32B2 for 32 MB */
+ /* #include "mt48lc8m32b2-6-7.h" */
+@@ -98,6 +99,7 @@ long int initdram (int board_type)
+ {
+ 	ulong dramsize = 0;
+ 	ulong dramsize2 = 0;
++	uint svr, pvr;
+ #ifndef CFG_RAMBOOT
+ 	ulong test1, test2;
+ 
+@@ -192,6 +194,22 @@ long int initdram (int board_type)
+ 
+ #endif /* CFG_RAMBOOT */
+ 
++	/*
++	 * On MPC5200B we need to set the special configuration delay in the
++	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
++	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
++	 *
++	 * "The SDelay should be written to a value of 0x00000004. It is
++	 * required to account for changes caused by normal wafer processing
++	 * parameters."
++	 */
++	svr = get_svr();
++	pvr = get_pvr();
++	if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
++		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
++		__asm__ volatile ("sync");
++	}
++
+ 	return dramsize + dramsize2;
+ }
+ 
+diff -Naupr u-boot-1.1.6/board/mpc8349emds/Makefile u-boot-1.1.6-fsl-1/board/mpc8349emds/Makefile
+--- u-boot-1.1.6/board/mpc8349emds/Makefile	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349emds/Makefile	2006-11-10 11:24:28.000000000 -0600
+@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
+ 
+ LIB	= $(obj)lib$(BOARD).a
+ 
+-COBJS	:= $(BOARD).o
++COBJS	:= $(BOARD).o pci.o
+ 
+ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+ OBJS	:= $(addprefix $(obj),$(COBJS))
+diff -Naupr u-boot-1.1.6/board/mpc8349emds/mpc8349emds.c u-boot-1.1.6-fsl-1/board/mpc8349emds/mpc8349emds.c
+--- u-boot-1.1.6/board/mpc8349emds/mpc8349emds.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349emds/mpc8349emds.c	2006-11-10 11:24:28.000000000 -0600
+@@ -33,6 +33,10 @@
+ #if defined(CONFIG_SPD_EEPROM)
+ #include <spd_sdram.h>
+ #endif
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
+ int fixed_sdram(void);
+ void sdram_init(void);
+ 
+@@ -59,7 +63,7 @@ int board_early_init_f (void)
+ 
+ long int initdram (int board_type)
+ {
+-	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
++	volatile immap_t *im = (immap_t *)CFG_IMMR;
+ 	u32 msize = 0;
+ 
+ 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+@@ -96,7 +100,7 @@ long int initdram (int board_type)
+  ************************************************************************/
+ int fixed_sdram(void)
+ {
+-	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
++	volatile immap_t *im = (immap_t *)CFG_IMMR;
+ 	u32 msize = 0;
+ 	u32 ddr_size;
+ 	u32 ddr_size_log2;
+@@ -167,8 +171,8 @@ int checkboard (void)
+ 
+ void sdram_init(void)
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile lbus8349_t *lbc= &immap->lbus;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile lbus83xx_t *lbc= &immap->lbus;
+ 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+ 
+ 	puts("\n   SDRAM on Local Bus: ");
+@@ -245,8 +249,8 @@ void sdram_init(void)
+  */
+ void ecc_print_status(void)
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile ddr8349_t *ddr = &immap->ddr;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile ddr83xx_t *ddr = &immap->ddr;
+ 
+ 	printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+ 
+@@ -320,8 +324,8 @@ void ecc_print_status(void)
+ 
+ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile ddr8349_t *ddr = &immap->ddr;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile ddr83xx_t *ddr = &immap->ddr;
+ 	volatile u32 val;
+ 	u64 *addr, count, val64;
+ 	register u64 *i;
+@@ -564,3 +568,23 @@ U_BOOT_CMD(
+ 	"  - re-inits memory"
+ );
+ #endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++#ifdef CONFIG_PCI
++	ft_pci_setup(blob, bd);
++#endif
++	ft_cpu_setup(blob, bd);
++
++	p = ft_get_prop(blob, "/memory/reg", &len);
++	if (p != NULL) {
++		*p++ = cpu_to_be32(bd->bi_memstart);
++		*p = cpu_to_be32(bd->bi_memsize);
++	}
++}
++#endif
+diff -Naupr u-boot-1.1.6/board/mpc8349emds/pci.c u-boot-1.1.6-fsl-1/board/mpc8349emds/pci.c
+--- u-boot-1.1.6/board/mpc8349emds/pci.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349emds/pci.c	2006-12-06 10:33:49.000000000 -0600
+@@ -68,12 +68,13 @@ static struct pci_controller pci_hose[] 
+ void
+ pib_init(void)
+ {
+-	u8 val8;
++	u8 val8, orig_i2c_bus;
+ 	/*
+ 	 * Assign PIB PMC slot to desired PCI bus
+ 	 */
+-	mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET);
+-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
++	/* Switch temporarily to I2C bus #2 */
++	orig_i2c_bus = i2c_get_bus_num();
++	i2c_set_bus_num(1);
+ 
+ 	val8 = 0;
+ 	i2c_write(0x23, 0x6, 1, &val8, 1);
+@@ -118,6 +119,8 @@ pib_init(void)
+ 	printf("PCI1: 32-bit on PMC1, PMC2\n");
+ 	printf("PCI2: 32-bit on PMC3\n");
+ #endif
++	/* Reset to original I2C bus */
++	i2c_set_bus_num(orig_i2c_bus);
+ }
+ 
+ /**************************************************************************
+@@ -130,18 +133,18 @@ void
+ pci_init_board(void)
+ {
+ 	volatile immap_t *	immr;
+-	volatile clk8349_t *	clk;
+-	volatile law8349_t *	pci_law;
+-	volatile pot8349_t *	pci_pot;
+-	volatile pcictrl8349_t *	pci_ctrl;
+-	volatile pciconf8349_t *	pci_conf;
++	volatile clk83xx_t *	clk;
++	volatile law83xx_t *	pci_law;
++	volatile pot83xx_t *	pci_pot;
++	volatile pcictrl83xx_t *	pci_ctrl;
++	volatile pciconf83xx_t *	pci_conf;
+ 	u16 reg16;
+ 	u32 reg32;
+ 	u32 dev;
+ 	struct	pci_controller * hose;
+ 
+-	immr = (immap_t *)CFG_IMMRBAR;
+-	clk = (clk8349_t *)&immr->clk;
++	immr = (immap_t *)CFG_IMMR;
++	clk = (clk83xx_t *)&immr->clk;
+ 	pci_law = immr->sysconf.pcilaw;
+ 	pci_pot = immr->ios.pot;
+ 	pci_ctrl = immr->pci_ctrl;
+@@ -254,8 +257,8 @@ pci_init_board(void)
+ 	hose->region_count = 4;
+ 
+ 	pci_setup_indirect(hose,
+-			   (CFG_IMMRBAR+0x8300),
+-			   (CFG_IMMRBAR+0x8304));
++			   (CFG_IMMR+0x8300),
++			   (CFG_IMMR+0x8304));
+ 
+ 	pci_register_hose(hose);
+ 
+@@ -350,8 +353,8 @@ pci_init_board(void)
+ 	hose->region_count = 4;
+ 
+ 	pci_setup_indirect(hose,
+-			   (CFG_IMMRBAR+0x8380),
+-			   (CFG_IMMRBAR+0x8384));
++			   (CFG_IMMR+0x8380),
++			   (CFG_IMMR+0x8384));
+ 
+ 	pci_register_hose(hose);
+ 
+@@ -379,4 +382,26 @@ pci_init_board(void)
+ 
+ }
+ 
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_pci_setup(void *blob, bd_t *bd)
++{
++       	u32 *p;
++       	int len;
++
++       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
++       	if (p != NULL) {
++		p[0] = pci_hose[0].first_busno;
++		p[1] = pci_hose[0].last_busno;
++       	}
++
++#ifdef CONFIG_MPC83XX_PCI2
++	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
++	if (p != NULL) {
++		p[0] = pci_hose[1].first_busno;
++		p[1] = pci_hose[1].last_busno;
++	}
++#endif
++}
++#endif /* CONFIG_OF_FLAT_TREE */
+ #endif /* CONFIG_PCI */
+diff -Naupr u-boot-1.1.6/board/mpc8349itx/config.mk u-boot-1.1.6-fsl-1/board/mpc8349itx/config.mk
+--- u-boot-1.1.6/board/mpc8349itx/config.mk	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/config.mk	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,33 @@
++#
++# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# MPC8349ITX
++#
++
++TEXT_BASE  =   0xFEF00000
++
++ifneq ($(OBJTREE),$(SRCTREE))
++# We are building u-boot in a separate directory, use generated
++# .lds script from OBJTREE directory.
++LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
++endif
+diff -Naupr u-boot-1.1.6/board/mpc8349itx/Makefile u-boot-1.1.6-fsl-1/board/mpc8349itx/Makefile
+--- u-boot-1.1.6/board/mpc8349itx/Makefile	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/Makefile	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,48 @@
++#
++# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS	:= $(BOARD).o pci.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS)
++	$(AR) crv $@ $(OBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff -Naupr u-boot-1.1.6/board/mpc8349itx/mpc8349itx.c u-boot-1.1.6-fsl-1/board/mpc8349itx/mpc8349itx.c
+--- u-boot-1.1.6/board/mpc8349itx/mpc8349itx.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/mpc8349itx.c	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,477 @@
++/*
++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <ioports.h>
++#include <mpc83xx.h>
++#include <i2c.h>
++#include <spd.h>
++#include <miiphy.h>
++
++#ifdef CONFIG_PCI
++#include <asm/mpc8349_pci.h>
++#include <pci.h>
++#endif
++
++#ifdef CONFIG_SPD_EEPROM
++#include <spd_sdram.h>
++#else
++#include <asm/mmu.h>
++#endif
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
++#ifndef CONFIG_SPD_EEPROM
++/*************************************************************************
++ *  fixed sdram init -- doesn't use serial presence detect.
++ ************************************************************************/
++int fixed_sdram(void)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 ddr_size;		/* The size of RAM, in bytes */
++	u32 ddr_size_log2 = 0;
++
++	for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
++		if (ddr_size & 1) {
++			return -1;
++		}
++		ddr_size_log2++;
++	}
++
++	im->sysconf.ddrlaw[0].ar =
++	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
++	im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
++
++	/* Only one CS0 for DDR */
++	im->ddr.csbnds[0].csbnds = 0x0000000f;
++	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
++
++	debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
++	debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
++
++	debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
++	debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
++
++	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
++	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
++	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR;
++	im->ddr.sdram_mode =
++	    (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
++	im->ddr.sdram_interval =
++	    (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
++						       SDRAM_INTERVAL_BSTOPRE_SHIFT);
++	im->ddr.sdram_clk_cntl =
++	    DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
++
++	udelay(200);
++
++	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
++
++	debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
++	debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
++	debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
++	debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
++	debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
++
++	return CFG_DDR_SIZE;
++}
++#endif
++
++#ifdef CONFIG_PCI
++/*
++ * Initialize PCI Devices, report devices found
++ */
++#ifndef CONFIG_PCI_PNP
++static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
++	{
++	 PCI_ANY_ID,
++	 PCI_ANY_ID,
++	 PCI_ANY_ID,
++	 PCI_ANY_ID,
++	 0x0f,
++	 PCI_ANY_ID,
++	 pci_cfgfunc_config_device,
++	 {
++	  PCI_ENET0_IOADDR,
++	  PCI_ENET0_MEMADDR,
++	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
++	 },
++	{}
++}
++#endif
++
++volatile static struct pci_controller hose[] = {
++	{
++#ifndef CONFIG_PCI_PNP
++	      config_table:pci_mpc83xxmitx_config_table,
++#endif
++	 },
++	{
++#ifndef CONFIG_PCI_PNP
++	      config_table:pci_mpc83xxmitx_config_table,
++#endif
++	 }
++};
++#endif				/* CONFIG_PCI */
++
++/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. */
++
++void sdram_init(void)
++{
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
++	volatile lbus83xx_t *lbc = &immap->lbus;
++
++#if defined(CFG_BR2_PRELIM) \
++	&& defined(CFG_OR2_PRELIM) \
++	&& defined(CFG_LBLAWBAR2_PRELIM) \
++	&& defined(CFG_LBLAWAR2_PRELIM) \
++	&& !defined(CONFIG_COMPACT_FLASH)
++
++	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
++
++	puts("\n   SDRAM on Local Bus: ");
++	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
++
++	/*
++	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
++	 */
++
++	/*setup mtrpt, lsrt and lbcr for LB bus */
++	lbc->lbcr = CFG_LBC_LBCR;
++	lbc->mrtpr = CFG_LBC_MRTPR;
++	lbc->lsrt = CFG_LBC_LSRT;
++	asm("sync");
++
++	/*
++	 * Configure the SDRAM controller Machine Mode register.
++	 */
++	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* 0x40636733; normal operation */
++
++	lbc->lsdmr = CFG_LBC_LSDMR_1;	/*0x68636733; precharge all the banks */
++	asm("sync");
++	*sdram_addr = 0xff;
++	udelay(100);
++
++	lbc->lsdmr = CFG_LBC_LSDMR_2;	/*0x48636733; auto refresh */
++	asm("sync");
++	*sdram_addr = 0xff; /*1 time*/
++	udelay(100);
++	*sdram_addr = 0xff; /*2 times*/
++	udelay(100);
++	*sdram_addr = 0xff; /*3 times*/
++	udelay(100);
++	*sdram_addr = 0xff; /*4 times*/
++	udelay(100);
++	*sdram_addr = 0xff; /*5 times*/
++	udelay(100);
++	*sdram_addr = 0xff; /*6 times*/
++	udelay(100);
++	*sdram_addr = 0xff; /*7 times*/
++	udelay(100);
++	*sdram_addr = 0xff; /*8 times*/
++	udelay(100);
++
++	lbc->lsdmr = CFG_LBC_LSDMR_4;	/*0x58636733;mode register write operation */
++	asm("sync");
++	*sdram_addr = 0xff;
++	udelay(100);
++
++	lbc->lsdmr = CFG_LBC_LSDMR_5;	/*0x40636733;normal operation */
++	asm("sync");
++	*sdram_addr = 0xff;
++	udelay(100);
++
++#else
++	puts("SDRAM on Local Bus is NOT available!\n");
++
++#ifdef CFG_BR2_PRELIM
++	lbc->bank[2].br = CFG_BR2_PRELIM;
++	lbc->bank[2].or = CFG_OR2_PRELIM;
++#endif
++
++#ifdef CFG_BR3_PRELIM
++	lbc->bank[3].br = CFG_BR3_PRELIM;
++	lbc->bank[3].or = CFG_OR3_PRELIM;
++#endif
++#endif
++}
++
++long int initdram(int board_type)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++#ifdef CONFIG_DDR_ECC
++	volatile ddr83xx_t *ddr = &im->ddr;
++#endif
++
++	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
++		return -1;
++
++	/* DDR SDRAM - Main SODIMM */
++	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
++#ifdef CONFIG_SPD_EEPROM
++	msize = spd_sdram();
++#else
++	msize = fixed_sdram();
++#endif
++
++#ifdef CONFIG_DDR_ECC
++	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
++		/* Unlike every other board, on the 83xx spd_sdram() returns
++		   megabytes instead of just bytes.  That's why we need to
++		   multiple by 1MB when calling ddr_enable_ecc(). */
++		ddr_enable_ecc(msize * 1048576);
++#endif
++
++	/*
++	 * Initialize SDRAM if it is on local bus.
++	 */
++	sdram_init();
++	puts("   DDR RAM: ");
++	/* return total bus SDRAM size(bytes)  -- DDR */
++	return msize * 1024 * 1024;
++}
++
++int checkboard(void)
++{
++	puts("Board: Freescale MPC8349E-mITX\n");
++
++	return 0;
++}
++
++/*
++ * Implement a work-around for a hardware problem with compact
++ * flash.
++ *
++ * Program the UPM if compact flash is enabled.
++ */
++int misc_init_f(void)
++{
++	volatile u32 *vsc7385_cpuctrl;
++
++	/* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register.  The power up
++	   default of VSC7385 L1_IRQ and L2_IRQ requests are active high.  That
++	   means it is 0 when the IRQ is not active.  This makes the wire-AND
++	   logic always assert IRQ7 to CPU even if there is no request from the
++	   switch.  Since the compact flash and the switch share the same IRQ,
++	   the Linux kernel will think that the compact flash is requesting irq
++	   and get stuck when it tries to clear the IRQ.  Thus we need to set
++	   the L2_IRQ0 and L2_IRQ1 to active low.
++
++	   The following code sets the L1_IRQ and L2_IRQ polarity to active low.
++	   Without this code, compact flash will not work in Linux because
++	   unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
++	   don't enable compact flash for U-Boot.
++	 */
++
++	vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0);
++	*vsc7385_cpuctrl |= 0x0c;
++
++#ifdef CONFIG_COMPACT_FLASH
++	/* UPM Table Configuration Code */
++	static uint UPMATable[] = {
++		0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
++		0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
++		0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
++		0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
++		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
++	};
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
++	volatile lbus83xx_t *lbus = &immap->lbus;
++
++	lbus->bank[3].br = CFG_BR3_PRELIM;
++	lbus->bank[3].or = CFG_OR3_PRELIM;
++
++	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
++	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
++	 */
++	lbus->mamr = 0x08404440;
++
++	upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
++
++	puts("UPMA:  Configured for compact flash\n");
++#endif
++
++	return 0;
++}
++
++/*
++ * Make sure the EEPROM has the HRCW correctly programmed.
++ * Make sure the RTC is correctly programmed.
++ *
++ * The MPC8349E-mITX can be configured to load the HRCW from
++ * EEPROM instead of flash.  This is controlled via jumpers
++ * LGPL0, 1, and 3.  Normally, these jumpers are set to 000 (all
++ * jumpered), but if they're set to 001 or 010, then the HRCW is
++ * read from the "I2C EEPROM".
++ *
++ * This function makes sure that the I2C EEPROM is programmed
++ * correctly.
++ */
++int misc_init_r(void)
++{
++	int rc = 0;
++
++#ifdef CONFIG_HARD_I2C
++
++	unsigned int orig_bus = i2c_get_bus_num();;
++	u8 i2c_data;
++
++#ifdef CFG_I2C_RTC_ADDR
++	u8 ds1339_data[17];
++#endif
++
++#ifdef CFG_I2C_EEPROM_ADDR
++	static u8 eeprom_data[] =	/* HRCW data */
++	{
++		0xaa, 0x55, 0xaa,
++		0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00,
++		0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00,
++	};
++
++	u8 data[sizeof(eeprom_data)];
++#endif
++
++	printf("Board revision: ");
++	i2c_set_bus_num(1);
++	if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
++		printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
++	else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
++		printf("%u.%u (PCF8475)\n",  (i2c_data & 0x02) >> 1, i2c_data & 0x01);
++	else {
++		printf("Unknown\n");
++		rc = 1;
++	}
++
++#ifdef CFG_I2C_EEPROM_ADDR
++	i2c_set_bus_num(0);
++
++	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
++		if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
++			if (i2c_write
++			    (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
++			     sizeof(eeprom_data)) != 0) {
++				puts("Failure writing the HRCW to EEPROM via I2C.\n");
++				rc = 1;
++			}
++		}
++	} else {
++		puts("Failure reading the HRCW from EEPROM via I2C.\n");
++		rc = 1;
++	}
++#endif
++
++#ifdef CFG_I2C_RTC_ADDR
++	i2c_set_bus_num(1);
++
++	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
++	    == 0) {
++
++		/* Work-around for MPC8349E-mITX bug #13601.
++		   If the RTC does not contain valid register values, the DS1339
++		   Linux driver will not work.
++		 */
++
++		/* Make sure status register bits 6-2 are zero */
++		ds1339_data[0x0f] &= ~0x7c;
++
++		/* Check for a valid day register value */
++		ds1339_data[0x03] &= ~0xf8;
++		if (ds1339_data[0x03] == 0) {
++			ds1339_data[0x03] = 1;
++		}
++
++		/* Check for a valid date register value */
++		ds1339_data[0x04] &= ~0xc0;
++		if ((ds1339_data[0x04] == 0) ||
++		    ((ds1339_data[0x04] & 0x0f) > 9) ||
++		    (ds1339_data[0x04] >= 0x32)) {
++			ds1339_data[0x04] = 1;
++		}
++
++		/* Check for a valid month register value */
++		ds1339_data[0x05] &= ~0x60;
++
++		if ((ds1339_data[0x05] == 0) ||
++		    ((ds1339_data[0x05] & 0x0f) > 9) ||
++		    ((ds1339_data[0x05] >= 0x13)
++		     && (ds1339_data[0x05] <= 0x19))) {
++			ds1339_data[0x05] = 1;
++		}
++
++		/* Enable Oscillator and rate select */
++		ds1339_data[0x0e] = 0x1c;
++
++		/* Work-around for MPC8349E-mITX bug #13330.
++		   Ensure that the RTC control register contains the value 0x1c.
++		   This affects SATA performance.
++		 */
++
++		if (i2c_write
++		    (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data,
++		     sizeof(ds1339_data))) {
++			puts("Failure writing to the RTC via I2C.\n");
++			rc = 1;
++		}
++	} else {
++		puts("Failure reading from the RTC via I2C.\n");
++		rc = 1;
++	}
++#endif
++
++	i2c_set_bus_num(orig_bus);
++#endif
++
++	return rc;
++}
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++#ifdef CONFIG_PCI
++	ft_pci_setup(blob, bd);
++#endif
++	ft_cpu_setup(blob, bd);
++
++	p = ft_get_prop(blob, "/memory/reg", &len);
++	if (p != NULL) {
++		*p++ = cpu_to_be32(bd->bi_memstart);
++		*p = cpu_to_be32(bd->bi_memsize);
++	}
++}
++#endif
+diff -Naupr u-boot-1.1.6/board/mpc8349itx/pci.c u-boot-1.1.6-fsl-1/board/mpc8349itx/pci.c
+--- u-boot-1.1.6/board/mpc8349itx/pci.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/pci.c	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,357 @@
++/*
++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++
++#ifdef CONFIG_PCI
++
++#include <asm/mmu.h>
++#include <asm/global_data.h>
++#include <pci.h>
++#include <asm/mpc8349_pci.h>
++#include <i2c.h>
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
++DECLARE_GLOBAL_DATA_PTR;
++
++/* System RAM mapped to PCI space */
++#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
++#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
++
++#ifndef CONFIG_PCI_PNP
++static struct pci_config_table pci_mpc8349itx_config_table[] = {
++	{
++	 PCI_ANY_ID,
++	 PCI_ANY_ID,
++	 PCI_ANY_ID,
++	 PCI_ANY_ID,
++	 PCI_IDSEL_NUMBER,
++	 PCI_ANY_ID,
++	 pci_cfgfunc_config_device,
++	 {
++	  PCI_ENET0_IOADDR,
++	  PCI_ENET0_MEMADDR,
++	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
++	 },
++	{}
++};
++#endif
++
++static struct pci_controller pci_hose[] = {
++	{
++#ifndef CONFIG_PCI_PNP
++	      config_table:pci_mpc8349itx_config_table,
++#endif
++	 },
++	{
++#ifndef CONFIG_PCI_PNP
++	      config_table:pci_mpc8349itx_config_table,
++#endif
++	 }
++};
++
++/**************************************************************************
++ * pci_init_board()
++ *
++ * NOTICE: PCI2 is not currently supported
++ *
++ */
++void pci_init_board(void)
++{
++	volatile immap_t *immr;
++	volatile clk83xx_t *clk;
++	volatile law83xx_t *pci_law;
++	volatile pot83xx_t *pci_pot;
++	volatile pcictrl83xx_t *pci_ctrl;
++	volatile pciconf83xx_t *pci_conf;
++	u8 reg8;
++	u16 reg16;
++	u32 reg32;
++	u32 dev;
++	struct pci_controller *hose;
++
++	immr = (immap_t *) CFG_IMMR;
++	clk = (clk83xx_t *) & immr->clk;
++	pci_law = immr->sysconf.pcilaw;
++	pci_pot = immr->ios.pot;
++	pci_ctrl = immr->pci_ctrl;
++	pci_conf = immr->pci_conf;
++
++	hose = &pci_hose[0];
++
++	/*
++	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
++	 */
++
++	reg32 = clk->occr;
++	udelay(2000);
++
++#ifdef CONFIG_HARD_I2C
++	i2c_set_bus_num(1);
++	/* Read the PCI_M66EN jumper setting */
++	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
++	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
++		if (reg8 & I2C_8574_PCI66)
++			clk->occr = 0xff000000;	/* 66 MHz PCI */
++		else
++			clk->occr = 0xff600001;	/* 33 MHz PCI */
++	} else {
++		clk->occr = 0xff600001;	/* 33 MHz PCI */
++	}
++#else
++	clk->occr = 0xff000000;	/* 66 MHz PCI */
++#endif
++
++	udelay(2000);
++
++	/*
++	 * Release PCI RST Output signal
++	 */
++	pci_ctrl[0].gcr = 0;
++	udelay(2000);
++	pci_ctrl[0].gcr = 1;
++
++#ifdef CONFIG_MPC83XX_PCI2
++	pci_ctrl[1].gcr = 0;
++	udelay(2000);
++	pci_ctrl[1].gcr = 1;
++#endif
++
++	/* We need to wait at least a 1sec based on PCI specs */
++	{
++		int i;
++
++		for (i = 0; i < 1000; i++)
++			udelay(1000);
++	}
++
++	/*
++	 * Configure PCI Local Access Windows
++	 */
++	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
++	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
++
++	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
++	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
++
++	/*
++	 * Configure PCI Outbound Translation Windows
++	 */
++
++	/* PCI1 mem space - prefetch */
++	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M;
++
++	/* PCI1 IO space */
++	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
++
++	/* PCI1 mmio - non-prefetch mem space */
++	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
++
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++
++	/* we need RAM mapped to PCI space for the devices to
++	 * access main memory */
++	pci_ctrl[0].pitar1 = 0x0;
++	pci_ctrl[0].pibar1 = 0x0;
++	pci_ctrl[0].piebar1 = 0x0;
++	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
++	    PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
++
++	hose->first_busno = 0;
++	hose->last_busno = 0xff;
++
++	/* PCI memory prefetch space */
++	pci_set_region(hose->regions + 0,
++		       CFG_PCI1_MEM_BASE,
++		       CFG_PCI1_MEM_PHYS,
++		       CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
++
++	/* PCI memory space */
++	pci_set_region(hose->regions + 1,
++		       CFG_PCI1_MMIO_BASE,
++		       CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);
++
++	/* PCI IO space */
++	pci_set_region(hose->regions + 2,
++		       CFG_PCI1_IO_BASE,
++		       CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
++
++	/* System memory space */
++	pci_set_region(hose->regions + 3,
++		       CONFIG_PCI_SYS_MEM_BUS,
++		       CONFIG_PCI_SYS_MEM_PHYS,
++		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
++
++	hose->region_count = 4;
++
++	pci_setup_indirect(hose,
++			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++
++	pci_register_hose(hose);
++
++	/*
++	 * Write to Command register
++	 */
++	reg16 = 0xff;
++	dev = PCI_BDF(hose->first_busno, 0, 0);
++	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
++	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
++
++#ifdef CONFIG_PCI_SCAN_SHOW
++	printf("PCI:   Bus Dev VenId DevId Class Int\n");
++#endif
++	/*
++	 * Hose scan.
++	 */
++	hose->last_busno = pci_hose_scan(hose);
++
++#ifdef CONFIG_MPC83XX_PCI2
++	hose = &pci_hose[1];
++
++	/*
++	 * Configure PCI Outbound Translation Windows
++	 */
++
++	/* PCI2 mem space - prefetch */
++	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M;
++
++	/* PCI2 IO space */
++	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M;
++
++	/* PCI2 mmio - non-prefetch mem space */
++	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M;
++
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++
++	/* we need RAM mapped to PCI space for the devices to
++	 * access main memory */
++	pci_ctrl[1].pitar1 = 0x0;
++	pci_ctrl[1].pibar1 = 0x0;
++	pci_ctrl[1].piebar1 = 0x0;
++	pci_ctrl[1].piwar1 =
++	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
++	    (__ilog2(gd->ram_size) - 1);
++
++	hose->first_busno = pci_hose[0].last_busno + 1;
++	hose->last_busno = 0xff;
++
++	/* PCI memory prefetch space */
++	pci_set_region(hose->regions + 0,
++		       CFG_PCI2_MEM_BASE,
++		       CFG_PCI2_MEM_PHYS,
++		       CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
++
++	/* PCI memory space */
++	pci_set_region(hose->regions + 1,
++		       CFG_PCI2_MMIO_BASE,
++		       CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);
++
++	/* PCI IO space */
++	pci_set_region(hose->regions + 2,
++		       CFG_PCI2_IO_BASE,
++		       CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);
++
++	/* System memory space */
++	pci_set_region(hose->regions + 3,
++		       CONFIG_PCI_SYS_MEM_BUS,
++		       CONFIG_PCI_SYS_MEM_PHYS,
++		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
++
++	hose->region_count = 4;
++
++	pci_setup_indirect(hose,
++			   (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384));
++
++	pci_register_hose(hose);
++
++	/*
++	 * Write to Command register
++	 */
++	reg16 = 0xff;
++	dev = PCI_BDF(hose->first_busno, 0, 0);
++	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
++	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
++
++	/*
++	 * Hose scan.
++	 */
++	hose->last_busno = pci_hose_scan(hose);
++#endif
++}
++
++#endif				/* CONFIG_PCI */
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_pci_setup(void *blob, bd_t *bd)
++{
++       	u32 *p;
++       	int len;
++
++       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
++       	if (p != NULL) {
++		p[0] = pci_hose[0].first_busno;
++		p[1] = pci_hose[0].last_busno;
++       	}
++
++#ifdef CONFIG_MPC83XX_PCI2
++	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
++	if (p != NULL) {
++		p[0] = pci_hose[1].first_busno;
++		p[1] = pci_hose[1].last_busno;
++	}
++#endif
++}
++#endif /* CONFIG_OF_FLAT_TREE */
+diff -Naupr u-boot-1.1.6/board/mpc8349itx/u-boot.lds u-boot-1.1.6-fsl-1/board/mpc8349itx/u-boot.lds
+--- u-boot-1.1.6/board/mpc8349itx/u-boot.lds	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/u-boot.lds	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,120 @@
++/*
++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SECTIONS
++{
++  /* Read-only sections, merged into text segment: */
++  . = + SIZEOF_HEADERS;
++  .interp : { *(.interp) }
++  .hash          : { *(.hash)		}
++  .dynsym        : { *(.dynsym)		}
++  .dynstr        : { *(.dynstr)		}
++  .rel.text      : { *(.rel.text)		}
++  .rela.text     : { *(.rela.text) 	}
++  .rel.data      : { *(.rel.data)		}
++  .rela.data     : { *(.rela.data) 	}
++  .rel.rodata    : { *(.rel.rodata) 	}
++  .rela.rodata   : { *(.rela.rodata) 	}
++  .rel.got       : { *(.rel.got)		}
++  .rela.got      : { *(.rela.got)		}
++  .rel.ctors     : { *(.rel.ctors)	}
++  .rela.ctors    : { *(.rela.ctors)	}
++  .rel.dtors     : { *(.rel.dtors)	}
++  .rela.dtors    : { *(.rela.dtors)	}
++  .rel.bss       : { *(.rel.bss)		}
++  .rela.bss      : { *(.rela.bss)		}
++  .rel.plt       : { *(.rel.plt)		}
++  .rela.plt      : { *(.rela.plt)		}
++  .init          : { *(.init)	}
++  .plt : { *(.plt) }
++  .text      :
++  {
++    cpu/mpc83xx/start.o	(.text)
++    *(.text)
++    *(.fixup)
++    *(.got1)
++    . = ALIGN(16);
++    *(.rodata)
++    *(.rodata1)
++    *(.rodata.str1.4)
++  }
++  .fini      : { *(.fini)    } =0
++  .ctors     : { *(.ctors)   }
++  .dtors     : { *(.dtors)   }
++
++  /* Read-write section, merged into data segment: */
++  . = (. + 0x0FFF) & 0xFFFFF000;
++  _erotext = .;
++  PROVIDE (erotext = .);
++  .reloc   :
++  {
++    *(.got)
++    _GOT2_TABLE_ = .;
++    *(.got2)
++    _FIXUP_TABLE_ = .;
++    *(.fixup)
++  }
++  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++  .data    :
++  {
++    *(.data)
++    *(.data1)
++    *(.sdata)
++    *(.sdata2)
++    *(.dynamic)
++    CONSTRUCTORS
++  }
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  . = .;
++  __u_boot_cmd_start = .;
++  .u_boot_cmd : { *(.u_boot_cmd) }
++  __u_boot_cmd_end = .;
++
++  . = .;
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  . = ALIGN(4096);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(4096);
++  __init_end = .;
++
++  __bss_start = .;
++  .bss       :
++  {
++   *(.sbss) *(.scommon)
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++  }
++  _end = . ;
++  PROVIDE (end = .);
++}
++ENTRY(_start)
+diff -Naupr u-boot-1.1.6/board/mpc8360emds/config.mk u-boot-1.1.6-fsl-1/board/mpc8360emds/config.mk
+--- u-boot-1.1.6/board/mpc8360emds/config.mk	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/config.mk	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,28 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# MPC8360EMDS
++#
++
++TEXT_BASE = 0xFE000000
+diff -Naupr u-boot-1.1.6/board/mpc8360emds/Makefile u-boot-1.1.6-fsl-1/board/mpc8360emds/Makefile
+--- u-boot-1.1.6/board/mpc8360emds/Makefile	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/Makefile	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,50 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS	:= $(BOARD).o pci.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff -Naupr u-boot-1.1.6/board/mpc8360emds/mpc8360emds.c u-boot-1.1.6-fsl-1/board/mpc8360emds/mpc8360emds.c
+--- u-boot-1.1.6/board/mpc8360emds/mpc8360emds.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/mpc8360emds.c	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,657 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on board/mpc8349emds/mpc8349emds.c
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <common.h>
++#include <ioports.h>
++#include <mpc83xx.h>
++#include <i2c.h>
++#include <spd.h>
++#include <miiphy.h>
++#include <command.h>
++#if defined(CONFIG_PCI)
++#include <pci.h>
++#endif
++#if defined(CONFIG_SPD_EEPROM)
++#include <spd_sdram.h>
++#else
++#include <asm/mmu.h>
++#endif
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
++const qe_iop_conf_t qe_iop_conf_tab[] = {
++	/* GETH1 */
++	{0,  3, 1, 0, 1}, /* TxD0 */
++	{0,  4, 1, 0, 1}, /* TxD1 */
++	{0,  5, 1, 0, 1}, /* TxD2 */
++	{0,  6, 1, 0, 1}, /* TxD3 */
++	{1,  6, 1, 0, 3}, /* TxD4 */
++	{1,  7, 1, 0, 1}, /* TxD5 */
++	{1,  9, 1, 0, 2}, /* TxD6 */
++	{1, 10, 1, 0, 2}, /* TxD7 */
++	{0,  9, 2, 0, 1}, /* RxD0 */
++	{0, 10, 2, 0, 1}, /* RxD1 */
++	{0, 11, 2, 0, 1}, /* RxD2 */
++	{0, 12, 2, 0, 1}, /* RxD3 */
++	{0, 13, 2, 0, 1}, /* RxD4 */
++	{1,  1, 2, 0, 2}, /* RxD5 */
++	{1,  0, 2, 0, 2}, /* RxD6 */
++	{1,  4, 2, 0, 2}, /* RxD7 */
++	{0,  7, 1, 0, 1}, /* TX_EN */
++	{0,  8, 1, 0, 1}, /* TX_ER */
++	{0, 15, 2, 0, 1}, /* RX_DV */
++	{0, 16, 2, 0, 1}, /* RX_ER */
++	{0,  0, 2, 0, 1}, /* RX_CLK */
++	{2,  9, 1, 0, 3}, /* GTX_CLK - CLK10 */
++	{2,  8, 2, 0, 1}, /* GTX125 - CLK9 */
++	/* GETH2 */
++	{0, 17, 1, 0, 1}, /* TxD0 */
++	{0, 18, 1, 0, 1}, /* TxD1 */
++	{0, 19, 1, 0, 1}, /* TxD2 */
++	{0, 20, 1, 0, 1}, /* TxD3 */
++	{1,  2, 1, 0, 1}, /* TxD4 */
++	{1,  3, 1, 0, 2}, /* TxD5 */
++	{1,  5, 1, 0, 3}, /* TxD6 */
++	{1,  8, 1, 0, 3}, /* TxD7 */
++	{0, 23, 2, 0, 1}, /* RxD0 */
++	{0, 24, 2, 0, 1}, /* RxD1 */
++	{0, 25, 2, 0, 1}, /* RxD2 */
++	{0, 26, 2, 0, 1}, /* RxD3 */
++	{0, 27, 2, 0, 1}, /* RxD4 */
++	{1, 12, 2, 0, 2}, /* RxD5 */
++	{1, 13, 2, 0, 3}, /* RxD6 */
++	{1, 11, 2, 0, 2}, /* RxD7 */
++	{0, 21, 1, 0, 1}, /* TX_EN */
++	{0, 22, 1, 0, 1}, /* TX_ER */
++	{0, 29, 2, 0, 1}, /* RX_DV */
++	{0, 30, 2, 0, 1}, /* RX_ER */
++	{0, 31, 2, 0, 1}, /* RX_CLK */
++	{2,  2, 1, 0, 2}, /* GTX_CLK = CLK10 */
++	{2,  3, 2, 0, 1}, /* GTX125 - CLK4 */
++
++	{0,  1, 3, 0, 2}, /* MDIO */
++	{0,  2, 1, 0, 1}, /* MDC */
++
++	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
++};
++
++int board_early_init_f(void)
++{
++	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
++
++	/* Enable flash write */
++	bcsr[0xa] &= ~0x04;
++
++	return 0;
++}
++
++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
++extern void ddr_enable_ecc(unsigned int dram_size);
++#endif
++int fixed_sdram(void);
++void sdram_init(void);
++
++long int initdram(int board_type)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++
++	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
++		return -1;
++
++	/* DDR SDRAM - Main SODIMM */
++	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
++#if defined(CONFIG_SPD_EEPROM)
++	msize = spd_sdram();
++#else
++	msize = fixed_sdram();
++#endif
++
++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
++	/*
++	 * Initialize DDR ECC byte
++	 */
++	ddr_enable_ecc(msize * 1024 * 1024);
++#endif
++	/*
++	 * Initialize SDRAM if it is on local bus.
++	 */
++	sdram_init();
++	puts("   DDR RAM: ");
++	/* return total bus SDRAM size(bytes)  -- DDR */
++	return (msize * 1024 * 1024);
++}
++
++#if !defined(CONFIG_SPD_EEPROM)
++/*************************************************************************
++ *  fixed sdram init -- doesn't use serial presence detect.
++ ************************************************************************/
++int fixed_sdram(void)
++{
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
++	u32 msize = 0;
++	u32 ddr_size;
++	u32 ddr_size_log2;
++
++	msize = CFG_DDR_SIZE;
++	for (ddr_size = msize << 20, ddr_size_log2 = 0;
++	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
++		if (ddr_size & 1) {
++			return -1;
++		}
++	}
++	im->sysconf.ddrlaw[0].ar =
++	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
++#if (CFG_DDR_SIZE != 256)
++#warning Currenly any ddr size other than 256 is not supported
++#endif
++	im->ddr.csbnds[0].csbnds = 0x00000007;
++	im->ddr.csbnds[1].csbnds = 0x0008000f;
++
++	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
++	im->ddr.cs_config[1] = CFG_DDR_CONFIG;
++
++	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
++	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
++	im->ddr.sdram_cfg = CFG_DDR_CONTROL;
++
++	im->ddr.sdram_mode = CFG_DDR_MODE;
++	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
++	udelay(200);
++	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
++
++	return msize;
++}
++#endif				/*!CFG_SPD_EEPROM */
++
++int checkboard(void)
++{
++	puts("Board: Freescale MPC8360EMDS\n");
++	return 0;
++}
++
++/*
++ * if MPC8360EMDS is soldered with SDRAM
++ */
++#if defined(CFG_BR2_PRELIM)  \
++	&& defined(CFG_OR2_PRELIM) \
++	&& defined(CFG_LBLAWBAR2_PRELIM) \
++	&& defined(CFG_LBLAWAR2_PRELIM)
++/*
++ * Initialize SDRAM memory on the Local Bus.
++ */
++
++void sdram_init(void)
++{
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
++	volatile lbus83xx_t *lbc = &immap->lbus;
++	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
++
++	puts("\n   SDRAM on Local Bus: ");
++	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
++	/*
++	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
++	 */
++	/*setup mtrpt, lsrt and lbcr for LB bus */
++	lbc->lbcr = CFG_LBC_LBCR;
++	lbc->mrtpr = CFG_LBC_MRTPR;
++	lbc->lsrt = CFG_LBC_LSRT;
++	asm("sync");
++
++	/*
++	 * Configure the SDRAM controller Machine Mode Register.
++	 */
++	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* Normal Operation */
++	lbc->lsdmr = CFG_LBC_LSDMR_1;	/* Precharge All Banks */
++	asm("sync");
++	*sdram_addr = 0xff;
++	udelay(100);
++
++	/*
++	 * We need do 8 times auto refresh operation.
++	 */
++	lbc->lsdmr = CFG_LBC_LSDMR_2;
++	asm("sync");
++	*sdram_addr = 0xff;	/* 1 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 2 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 3 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 4 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 5 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 6 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 7 times */
++	udelay(100);
++	*sdram_addr = 0xff;	/* 8 times */
++	udelay(100);
++
++	/* Mode register write operation */
++	lbc->lsdmr = CFG_LBC_LSDMR_4;
++	asm("sync");
++	*(sdram_addr + 0xcc) = 0xff;
++	udelay(100);
++
++	/* Normal operation */
++	lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
++	asm("sync");
++	*sdram_addr = 0xff;
++	udelay(100);
++}
++#else
++void sdram_init(void)
++{
++	puts("SDRAM on Local Bus is NOT available!\n");
++}
++#endif
++
++#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
++/*
++ * ECC user commands
++ */
++void ecc_print_status(void)
++{
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
++	volatile ddr83xx_t *ddr = &immap->ddr;
++
++	printf("\nECC mode: %s\n\n",
++	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
++
++	/* Interrupts */
++	printf("Memory Error Interrupt Enable:\n");
++	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
++	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
++	printf("  Single-Bit Error Interrupt Enable: %d\n",
++	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
++	printf("  Memory Select Error Interrupt Enable: %d\n\n",
++	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
++
++	/* Error disable */
++	printf("Memory Error Disable:\n");
++	printf("  Multiple-Bit Error Disable: %d\n",
++	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
++	printf("  Sinle-Bit Error Disable: %d\n",
++	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
++	printf("  Memory Select Error Disable: %d\n\n",
++	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
++
++	/* Error injection */
++	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
++	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
++
++	printf("Memory Data Path Error Injection Mask ECC:\n");
++	printf("  ECC Mirror Byte: %d\n",
++	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
++	printf("  ECC Injection Enable: %d\n",
++	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
++	printf("  ECC Error Injection Mask: 0x%02x\n\n",
++	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
++
++	/* SBE counter/threshold */
++	printf("Memory Single-Bit Error Management (0..255):\n");
++	printf("  Single-Bit Error Threshold: %d\n",
++	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
++	printf("  Single-Bit Error Counter: %d\n\n",
++	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
++
++	/* Error detect */
++	printf("Memory Error Detect:\n");
++	printf("  Multiple Memory Errors: %d\n",
++	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
++	printf("  Multiple-Bit Error: %d\n",
++	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
++	printf("  Single-Bit Error: %d\n",
++	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
++	printf("  Memory Select Error: %d\n\n",
++	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
++
++	/* Capture data */
++	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
++	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
++	       ddr->capture_data_hi, ddr->capture_data_lo);
++	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
++	       ddr->capture_ecc & CAPTURE_ECC_ECE);
++
++	printf("Memory Error Attributes Capture:\n");
++	printf(" Data Beat Number: %d\n",
++	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
++	       ECC_CAPT_ATTR_BNUM_SHIFT);
++	printf("  Transaction Size: %d\n",
++	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
++	       ECC_CAPT_ATTR_TSIZ_SHIFT);
++	printf("  Transaction Source: %d\n",
++	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
++	       ECC_CAPT_ATTR_TSRC_SHIFT);
++	printf("  Transaction Type: %d\n",
++	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
++	       ECC_CAPT_ATTR_TTYP_SHIFT);
++	printf("  Error Information Valid: %d\n\n",
++	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
++}
++
++int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
++{
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
++	volatile ddr83xx_t *ddr = &immap->ddr;
++	volatile u32 val;
++	u64 *addr;
++	u32 count;
++	register u64 *i;
++	u32 ret[2];
++	u32 pattern[2];
++	u32 writeback[2];
++
++	/* The pattern is written into memory to generate error */
++	pattern[0] = 0xfedcba98UL;
++	pattern[1] = 0x76543210UL;
++
++	/* After injecting error, re-initialize the memory with the value */
++	writeback[0] = 0x01234567UL;
++	writeback[1] = 0x89abcdefUL;
++
++	if (argc > 4) {
++		printf("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++
++	if (argc == 2) {
++		if (strcmp(argv[1], "status") == 0) {
++			ecc_print_status();
++			return 0;
++		} else if (strcmp(argv[1], "captureclear") == 0) {
++			ddr->capture_address = 0;
++			ddr->capture_data_hi = 0;
++			ddr->capture_data_lo = 0;
++			ddr->capture_ecc = 0;
++			ddr->capture_attributes = 0;
++			return 0;
++		}
++	}
++	if (argc == 3) {
++		if (strcmp(argv[1], "sbecnt") == 0) {
++			val = simple_strtoul(argv[2], NULL, 10);
++			if (val > 255) {
++				printf("Incorrect Counter value, "
++				       "should be 0..255\n");
++				return 1;
++			}
++
++			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
++			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
++
++			ddr->err_sbe = val;
++			return 0;
++		} else if (strcmp(argv[1], "sbethr") == 0) {
++			val = simple_strtoul(argv[2], NULL, 10);
++			if (val > 255) {
++				printf("Incorrect Counter value, "
++				       "should be 0..255\n");
++				return 1;
++			}
++
++			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
++			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
++
++			ddr->err_sbe = val;
++			return 0;
++		} else if (strcmp(argv[1], "errdisable") == 0) {
++			val = ddr->err_disable;
++
++			if (strcmp(argv[2], "+sbe") == 0) {
++				val |= ECC_ERROR_DISABLE_SBED;
++			} else if (strcmp(argv[2], "+mbe") == 0) {
++				val |= ECC_ERROR_DISABLE_MBED;
++			} else if (strcmp(argv[2], "+mse") == 0) {
++				val |= ECC_ERROR_DISABLE_MSED;
++			} else if (strcmp(argv[2], "+all") == 0) {
++				val |= (ECC_ERROR_DISABLE_SBED |
++					ECC_ERROR_DISABLE_MBED |
++					ECC_ERROR_DISABLE_MSED);
++			} else if (strcmp(argv[2], "-sbe") == 0) {
++				val &= ~ECC_ERROR_DISABLE_SBED;
++			} else if (strcmp(argv[2], "-mbe") == 0) {
++				val &= ~ECC_ERROR_DISABLE_MBED;
++			} else if (strcmp(argv[2], "-mse") == 0) {
++				val &= ~ECC_ERROR_DISABLE_MSED;
++			} else if (strcmp(argv[2], "-all") == 0) {
++				val &= ~(ECC_ERROR_DISABLE_SBED |
++					 ECC_ERROR_DISABLE_MBED |
++					 ECC_ERROR_DISABLE_MSED);
++			} else {
++				printf("Incorrect err_disable field\n");
++				return 1;
++			}
++
++			ddr->err_disable = val;
++			__asm__ __volatile__("sync");
++			__asm__ __volatile__("isync");
++			return 0;
++		} else if (strcmp(argv[1], "errdetectclr") == 0) {
++			val = ddr->err_detect;
++
++			if (strcmp(argv[2], "mme") == 0) {
++				val |= ECC_ERROR_DETECT_MME;
++			} else if (strcmp(argv[2], "sbe") == 0) {
++				val |= ECC_ERROR_DETECT_SBE;
++			} else if (strcmp(argv[2], "mbe") == 0) {
++				val |= ECC_ERROR_DETECT_MBE;
++			} else if (strcmp(argv[2], "mse") == 0) {
++				val |= ECC_ERROR_DETECT_MSE;
++			} else if (strcmp(argv[2], "all") == 0) {
++				val |= (ECC_ERROR_DETECT_MME |
++					ECC_ERROR_DETECT_MBE |
++					ECC_ERROR_DETECT_SBE |
++					ECC_ERROR_DETECT_MSE);
++			} else {
++				printf("Incorrect err_detect field\n");
++				return 1;
++			}
++
++			ddr->err_detect = val;
++			return 0;
++		} else if (strcmp(argv[1], "injectdatahi") == 0) {
++			val = simple_strtoul(argv[2], NULL, 16);
++
++			ddr->data_err_inject_hi = val;
++			return 0;
++		} else if (strcmp(argv[1], "injectdatalo") == 0) {
++			val = simple_strtoul(argv[2], NULL, 16);
++
++			ddr->data_err_inject_lo = val;
++			return 0;
++		} else if (strcmp(argv[1], "injectecc") == 0) {
++			val = simple_strtoul(argv[2], NULL, 16);
++			if (val > 0xff) {
++				printf("Incorrect ECC inject mask, "
++				       "should be 0x00..0xff\n");
++				return 1;
++			}
++			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
++
++			ddr->ecc_err_inject = val;
++			return 0;
++		} else if (strcmp(argv[1], "inject") == 0) {
++			val = ddr->ecc_err_inject;
++
++			if (strcmp(argv[2], "en") == 0)
++				val |= ECC_ERR_INJECT_EIEN;
++			else if (strcmp(argv[2], "dis") == 0)
++				val &= ~ECC_ERR_INJECT_EIEN;
++			else
++				printf("Incorrect command\n");
++
++			ddr->ecc_err_inject = val;
++			__asm__ __volatile__("sync");
++			__asm__ __volatile__("isync");
++			return 0;
++		} else if (strcmp(argv[1], "mirror") == 0) {
++			val = ddr->ecc_err_inject;
++
++			if (strcmp(argv[2], "en") == 0)
++				val |= ECC_ERR_INJECT_EMB;
++			else if (strcmp(argv[2], "dis") == 0)
++				val &= ~ECC_ERR_INJECT_EMB;
++			else
++				printf("Incorrect command\n");
++
++			ddr->ecc_err_inject = val;
++			return 0;
++		}
++	}
++	if (argc == 4) {
++		if (strcmp(argv[1], "testdw") == 0) {
++			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
++			count = simple_strtoul(argv[3], NULL, 16);
++
++			if ((u32) addr % 8) {
++				printf("Address not alligned on "
++				       "double word boundary\n");
++				return 1;
++			}
++			disable_interrupts();
++
++			for (i = addr; i < addr + count; i++) {
++
++				/* enable injects */
++				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
++				__asm__ __volatile__("sync");
++				__asm__ __volatile__("isync");
++
++				/* write memory location injecting errors */
++				ppcDWstore((u32 *) i, pattern);
++				__asm__ __volatile__("sync");
++
++				/* disable injects */
++				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
++				__asm__ __volatile__("sync");
++				__asm__ __volatile__("isync");
++
++				/* read data, this generates ECC error */
++				ppcDWload((u32 *) i, ret);
++				__asm__ __volatile__("sync");
++
++				/* re-initialize memory, double word write the location again,
++				 * generates new ECC code this time */
++				ppcDWstore((u32 *) i, writeback);
++				__asm__ __volatile__("sync");
++			}
++			enable_interrupts();
++			return 0;
++		}
++		if (strcmp(argv[1], "testword") == 0) {
++			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
++			count = simple_strtoul(argv[3], NULL, 16);
++
++			if ((u32) addr % 8) {
++				printf("Address not alligned on "
++				       "double word boundary\n");
++				return 1;
++			}
++			disable_interrupts();
++
++			for (i = addr; i < addr + count; i++) {
++
++				/* enable injects */
++				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
++				__asm__ __volatile__("sync");
++				__asm__ __volatile__("isync");
++
++				/* write memory location injecting errors */
++				*(u32 *) i = 0xfedcba98UL;
++				__asm__ __volatile__("sync");
++
++				/* sub double word write,
++				 * bus will read-modify-write,
++				 * generates ECC error */
++				*((u32 *) i + 1) = 0x76543210UL;
++				__asm__ __volatile__("sync");
++
++				/* disable injects */
++				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
++				__asm__ __volatile__("sync");
++				__asm__ __volatile__("isync");
++
++				/* re-initialize memory,
++				 * double word write the location again,
++				 * generates new ECC code this time */
++				ppcDWstore((u32 *) i, writeback);
++				__asm__ __volatile__("sync");
++			}
++			enable_interrupts();
++			return 0;
++		}
++	}
++	printf("Usage:\n%s\n", cmdtp->usage);
++	return 1;
++}
++
++U_BOOT_CMD(ecc, 4, 0, do_ecc,
++	   "ecc     - support for DDR ECC features\n",
++	   "status              - print out status info\n"
++	   "ecc captureclear        - clear capture regs data\n"
++	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
++	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
++	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
++	   "  [-|+]sbe - Single-Bit Error\n"
++	   "  [-|+]mbe - Multiple-Bit Error\n"
++	   "  [-|+]mse - Memory Select Error\n"
++	   "  [-|+]all - all errors\n"
++	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
++	   "  mme - Multiple Memory Errors\n"
++	   "  sbe - Single-Bit Error\n"
++	   "  mbe - Multiple-Bit Error\n"
++	   "  mse - Memory Select Error\n"
++	   "  all - all errors\n"
++	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
++	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
++	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
++	   "ecc inject <en|dis>    - enable/disable error injection\n"
++	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
++	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
++	   "  - enables injects\n"
++	   "  - writes pattern injecting errors with double word access\n"
++	   "  - disables injects\n"
++	   "  - reads pattern back with double word access, generates error\n"
++	   "  - re-inits memory\n"
++	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
++	   "  - enables injects\n"
++	   "  - writes pattern injecting errors with word access\n"
++	   "  - writes pattern with word access, generates error\n"
++	   "  - disables injects\n" "  - re-inits memory");
++#endif				/* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++#ifdef CONFIG_PCI
++	ft_pci_setup(blob, bd);
++#endif
++	ft_cpu_setup(blob, bd);
++
++	p = ft_get_prop(blob, "/memory/reg", &len);
++	if (p != NULL) {
++		*p++ = cpu_to_be32(bd->bi_memstart);
++		*p = cpu_to_be32(bd->bi_memsize);
++	}
++}
++#endif
+diff -Naupr u-boot-1.1.6/board/mpc8360emds/pci.c u-boot-1.1.6-fsl-1/board/mpc8360emds/pci.c
+--- u-boot-1.1.6/board/mpc8360emds/pci.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/pci.c	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,313 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++/*
++ * PCI Configuration space access support for MPC83xx PCI Bridge
++ */
++#include <asm/mmu.h>
++#include <asm/io.h>
++#include <common.h>
++#include <pci.h>
++#include <i2c.h>
++
++#include <asm/fsl_i2c.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if defined(CONFIG_PCI)
++#define PCI_FUNCTION_CONFIG   0x44
++#define PCI_FUNCTION_CFG_LOCK 0x20
++
++/*
++ * Initialize PCI Devices, report devices found
++ */
++#ifndef CONFIG_PCI_PNP
++static struct pci_config_table pci_mpc83xxemds_config_table[] = {
++	{
++	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++	 pci_cfgfunc_config_device,
++	 {PCI_ENET0_IOADDR,
++	  PCI_ENET0_MEMADDR,
++	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
++	 },
++	{}
++}
++#endif
++static struct pci_controller hose[] = {
++	{
++#ifndef CONFIG_PCI_PNP
++	      config_table:pci_mpc83xxemds_config_table,
++#endif
++	 },
++};
++
++/**********************************************************************
++ * pci_init_board()
++ *********************************************************************/
++void pci_init_board(void)
++#ifdef CONFIG_PCISLAVE
++{
++	u16 reg16;
++	volatile immap_t *immr;
++	volatile law83xx_t *pci_law;
++	volatile pot83xx_t *pci_pot;
++	volatile pcictrl83xx_t *pci_ctrl;
++	volatile pciconf83xx_t *pci_conf;
++
++	immr = (immap_t *) CFG_IMMR;
++	pci_law = immr->sysconf.pcilaw;
++	pci_pot = immr->ios.pot;
++	pci_ctrl = immr->pci_ctrl;
++	pci_conf = immr->pci_conf;
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++	pci_ctrl[0].pitar0 = 0x0;
++	pci_ctrl[0].pibar0 = 0x0;
++	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
++	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
++
++	pci_ctrl[0].pitar1 = 0x0;
++	pci_ctrl[0].pibar1 = 0x0;
++	pci_ctrl[0].piebar1 = 0x0;
++	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
++
++	pci_ctrl[0].pitar2 = 0x0;
++	pci_ctrl[0].pibar2 = 0x0;
++	pci_ctrl[0].piebar2 = 0x0;
++	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
++
++	hose[0].first_busno = 0;
++	hose[0].last_busno = 0xff;
++	pci_setup_indirect(&hose[0],
++			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++	reg16 = 0xff;
++
++	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				  PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_LATENCY_TIMER, 0x80);
++
++	/*
++	 * Unlock configuration lock in PCI function configuration register.
++	 */
++	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				  PCI_FUNCTION_CONFIG, &reg16);
++	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
++	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++				   PCI_FUNCTION_CONFIG, reg16);
++
++	printf("Enabled PCI 32bit Agent Mode\n");
++}
++#else
++{
++	volatile immap_t *immr;
++	volatile clk83xx_t *clk;
++	volatile law83xx_t *pci_law;
++	volatile pot83xx_t *pci_pot;
++	volatile pcictrl83xx_t *pci_ctrl;
++	volatile pciconf83xx_t *pci_conf;
++
++	u8 val8, orig_i2c_bus;
++	u16 reg16;
++	u32 val32;
++	u32 dev;
++
++	immr = (immap_t *) CFG_IMMR;
++	clk = (clk83xx_t *) & immr->clk;
++	pci_law = immr->sysconf.pcilaw;
++	pci_pot = immr->ios.pot;
++	pci_ctrl = immr->pci_ctrl;
++	pci_conf = immr->pci_conf;
++	/*
++	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
++	 */
++	val32 = clk->occr;
++	udelay(2000);
++#if defined(PCI_66M)
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++	printf("PCI clock is 66MHz\n");
++#elif defined(PCI_33M)
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
++	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
++	printf("PCI clock is 33MHz\n");
++#else
++	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++	printf("PCI clock is 66MHz\n");
++#endif
++	udelay(2000);
++
++	/*
++	 * Configure PCI Local Access Windows
++	 */
++	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
++	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
++
++	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
++	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
++
++	/*
++	 * Configure PCI Outbound Translation Windows
++	 */
++
++	/* PCI mem space - prefetch */
++	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[0].pocmr =
++	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
++
++	/* PCI mmio - non-prefetch mem space */
++	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
++
++	/* PCI IO space */
++	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
++	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
++	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
++
++	/*
++	 * Configure PCI Inbound Translation Windows
++	 */
++	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
++	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
++	pci_ctrl[0].piebar1 = 0x0;
++	pci_ctrl[0].piwar1 =
++	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
++	    PIWAR_IWS_2G;
++
++	/*
++	 * Assign PIB PMC slot to desired PCI bus
++	 */
++
++	/* Switch temporarily to I2C bus #2 */
++	orig_i2c_bus = i2c_get_bus_num();
++ 	i2c_set_bus_num(1);
++
++	val8 = 0;
++	i2c_write(0x23, 0x6, 1, &val8, 1);
++	i2c_write(0x23, 0x7, 1, &val8, 1);
++	val8 = 0xff;
++	i2c_write(0x23, 0x2, 1, &val8, 1);
++	i2c_write(0x23, 0x3, 1, &val8, 1);
++
++	val8 = 0;
++	i2c_write(0x26, 0x6, 1, &val8, 1);
++	val8 = 0x34;
++	i2c_write(0x26, 0x7, 1, &val8, 1);
++
++	val8 = 0xf3;		/*PMC1, PMC2, PMC3 slot to PCI bus */
++	i2c_write(0x26, 0x2, 1, &val8, 1);
++	val8 = 0xff;
++	i2c_write(0x26, 0x3, 1, &val8, 1);
++
++	val8 = 0;
++	i2c_write(0x27, 0x6, 1, &val8, 1);
++	i2c_write(0x27, 0x7, 1, &val8, 1);
++	val8 = 0xff;
++	i2c_write(0x27, 0x2, 1, &val8, 1);
++	val8 = 0xef;
++	i2c_write(0x27, 0x3, 1, &val8, 1);
++	asm("eieio");
++
++	/* Reset to original I2C bus */
++	i2c_set_bus_num(orig_i2c_bus);
++
++	/*
++	 * Release PCI RST Output signal
++	 */
++	udelay(2000);
++	pci_ctrl[0].gcr = 1;
++	udelay(2000);
++
++	hose[0].first_busno = 0;
++	hose[0].last_busno = 0xff;
++
++	/* PCI memory prefetch space */
++	pci_set_region(hose[0].regions + 0,
++		       CFG_PCI_MEM_BASE,
++		       CFG_PCI_MEM_PHYS,
++		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
++
++	/* PCI memory space */
++	pci_set_region(hose[0].regions + 1,
++		       CFG_PCI_MMIO_BASE,
++		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
++
++	/* PCI IO space */
++	pci_set_region(hose[0].regions + 2,
++		       CFG_PCI_IO_BASE,
++		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
++
++	/* System memory space */
++	pci_set_region(hose[0].regions + 3,
++		       CFG_PCI_SLV_MEM_LOCAL,
++		       CFG_PCI_SLV_MEM_BUS,
++		       CFG_PCI_SLV_MEM_SIZE,
++		       PCI_REGION_MEM | PCI_REGION_MEMORY);
++
++	hose[0].region_count = 4;
++
++	pci_setup_indirect(&hose[0],
++			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++
++	pci_register_hose(hose);
++
++	/*
++	 * Write command register
++	 */
++	reg16 = 0xff;
++	dev = PCI_BDF(0, 0, 0);
++	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
++	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
++
++	/*
++	 * Clear non-reserved bits in status register.
++	 */
++	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
++	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
++	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
++
++	printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
++
++	/*
++	 * Hose scan.
++	 */
++	hose->last_busno = pci_hose_scan(hose);
++}
++#endif				/* CONFIG_PCISLAVE */
++
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_pci_setup(void *blob, bd_t *bd)
++{
++       	u32 *p;
++       	int len;
++
++       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
++       	if (p != NULL) {
++		p[0] = hose[0].first_busno;
++		p[1] = hose[0].last_busno;
++       	}
++}
++#endif				/* CONFIG_OF_FLAT_TREE */
++#endif				/* CONFIG_PCI */
+diff -Naupr u-boot-1.1.6/board/mpc8360emds/u-boot.lds u-boot-1.1.6-fsl-1/board/mpc8360emds/u-boot.lds
+--- u-boot-1.1.6/board/mpc8360emds/u-boot.lds	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/u-boot.lds	2006-11-10 11:24:28.000000000 -0600
+@@ -0,0 +1,123 @@
++/*
++ * (C) Copyright 2006
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SECTIONS
++{
++  /* Read-only sections, merged into text segment: */
++  . = + SIZEOF_HEADERS;
++  .interp : { *(.interp) }
++  .hash          : { *(.hash)		}
++  .dynsym        : { *(.dynsym)		}
++  .dynstr        : { *(.dynstr)		}
++  .rel.text      : { *(.rel.text)		}
++  .rela.text     : { *(.rela.text) 	}
++  .rel.data      : { *(.rel.data)		}
++  .rela.data     : { *(.rela.data) 	}
++  .rel.rodata    : { *(.rel.rodata) 	}
++  .rela.rodata   : { *(.rela.rodata) 	}
++  .rel.got       : { *(.rel.got)		}
++  .rela.got      : { *(.rela.got)		}
++  .rel.ctors     : { *(.rel.ctors)	}
++  .rela.ctors    : { *(.rela.ctors)	}
++  .rel.dtors     : { *(.rel.dtors)	}
++  .rela.dtors    : { *(.rela.dtors)	}
++  .rel.bss       : { *(.rel.bss)		}
++  .rela.bss      : { *(.rela.bss)		}
++  .rel.plt       : { *(.rel.plt)		}
++  .rela.plt      : { *(.rela.plt)		}
++  .init          : { *(.init)	}
++  .plt : { *(.plt) }
++  .text      :
++  {
++    cpu/mpc83xx/start.o	(.text)
++    *(.text)
++    *(.fixup)
++    *(.got1)
++    . = ALIGN(16);
++    *(.rodata)
++    *(.rodata1)
++    *(.rodata.str1.4)
++    *(.eh_frame)
++  }
++  .fini      : { *(.fini)    } =0
++  .ctors     : { *(.ctors)   }
++  .dtors     : { *(.dtors)   }
++
++  /* Read-write section, merged into data segment: */
++  . = (. + 0x0FFF) & 0xFFFFF000;
++  _erotext = .;
++  PROVIDE (erotext = .);
++  .reloc   :
++  {
++    *(.got)
++    _GOT2_TABLE_ = .;
++    *(.got2)
++    _FIXUP_TABLE_ = .;
++    *(.fixup)
++  }
++  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++  .data    :
++  {
++    *(.data)
++    *(.data1)
++    *(.sdata)
++    *(.sdata2)
++    *(.dynamic)
++    CONSTRUCTORS
++  }
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  . = .;
++  __u_boot_cmd_start = .;
++  .u_boot_cmd : { *(.u_boot_cmd) }
++  __u_boot_cmd_end = .;
++
++
++  . = .;
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  . = ALIGN(4096);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(4096);
++  __init_end = .;
++
++  __bss_start = .;
++  .bss       :
++  {
++   *(.sbss) *(.scommon)
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++  }
++  _end = . ;
++  PROVIDE (end = .);
++}
++ENTRY(_start)
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/alpr.c u-boot-1.1.6-fsl-1/board/prodrive/alpr/alpr.c
+--- u-boot-1.1.6/board/prodrive/alpr/alpr.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/alpr.c	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,328 @@
++/*
++ * (C) Copyright 2006
++ * Stefan Roese, DENX Software Engineering, sr@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++
++#include <common.h>
++#include <asm/processor.h>
++#include <spd_sdram.h>
++#include <ppc4xx_enet.h>
++#include <miiphy.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++extern int alpr_fpga_init(void);
++
++int board_early_init_f (void)
++{
++	/*-------------------------------------------------------------------------
++	 * Initialize EBC CONFIG
++	 *-------------------------------------------------------------------------*/
++	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
++	      EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
++	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
++	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
++	      EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
++
++	/*--------------------------------------------------------------------
++	 * Setup the interrupt controller polarities, triggers, etc.
++	 *-------------------------------------------------------------------*/
++	mtdcr (uic0sr, 0xffffffff);	/* clear all */
++	mtdcr (uic0er, 0x00000000);	/* disable all */
++	mtdcr (uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
++	mtdcr (uic0pr, 0xfffffe03);	/* per manual */
++	mtdcr (uic0tr, 0x01c00000);	/* per manual */
++	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
++	mtdcr (uic0sr, 0xffffffff);	/* clear all */
++
++	mtdcr (uic1sr, 0xffffffff);	/* clear all */
++	mtdcr (uic1er, 0x00000000);	/* disable all */
++	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
++	mtdcr (uic1pr, 0xffffe0ff);	/* per ref-board manual */
++	mtdcr (uic1tr, 0x00ffc000);	/* per ref-board manual */
++	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
++	mtdcr (uic1sr, 0xffffffff);	/* clear all */
++
++	mtdcr (uic2sr, 0xffffffff);	/* clear all */
++	mtdcr (uic2er, 0x00000000);	/* disable all */
++	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
++	mtdcr (uic2pr, 0xffffffff);	/* per ref-board manual */
++	mtdcr (uic2tr, 0x00ff8c0f);	/* per ref-board manual */
++	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
++	mtdcr (uic2sr, 0xffffffff);	/* clear all */
++
++	mtdcr (uicb0sr, 0xfc000000); /* clear all */
++	mtdcr (uicb0er, 0x00000000); /* disable all */
++	mtdcr (uicb0cr, 0x00000000); /* all non-critical */
++	mtdcr (uicb0pr, 0xfc000000); /* */
++	mtdcr (uicb0tr, 0x00000000); /* */
++	mtdcr (uicb0vr, 0x00000001); /* */
++
++	/* Setup GPIO/IRQ multiplexing */
++	mtsdr(sdr_pfc0, 0x01a03e00);
++
++	return 0;
++}
++
++int last_stage_init(void)
++{
++	unsigned short reg;
++
++	/*
++	 * Configure LED's of both Marvell 88E1111 PHY's
++	 *
++	 * This has to be done after the 4xx ethernet driver is loaded,
++	 * so "last_stage_init()" is the right place.
++	 */
++	miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, &reg);
++	reg |= 0x0001;
++	miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
++	miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, &reg);
++	reg |= 0x0001;
++	miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
++
++	return 0;
++}
++
++static int board_rev(void)
++{
++	int rev;
++	u32 pfc0;
++
++	/* Setup GPIO14 & 15 as GPIO */
++	mfsdr(sdr_pfc0, pfc0);
++	pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
++	mtsdr(sdr_pfc0, pfc0);
++
++	/* Setup as input */
++	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
++	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
++
++	rev = (in32(GPIO0_IR) >> 16) & 0x3;
++
++	/* Setup GPIO14 & 15 as non GPIO again */
++	mfsdr(sdr_pfc0, pfc0);
++	pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
++	mtsdr(sdr_pfc0, pfc0);
++
++	return rev;
++}
++
++int checkboard (void)
++{
++	char *s = getenv ("serial#");
++
++	printf ("Board: ALPR");
++	if (s != NULL) {
++		puts (", serial# ");
++		puts (s);
++	}
++	printf(" (Rev. %d)\n", board_rev());
++
++	return (0);
++}
++
++#if defined(CFG_DRAM_TEST)
++int testdram (void)
++{
++	uint *pstart = (uint *) 0x00000000;
++	uint *pend = (uint *) 0x08000000;
++	uint *p;
++
++	for (p = pstart; p < pend; p++)
++		*p = 0xaaaaaaaa;
++
++	for (p = pstart; p < pend; p++) {
++		if (*p != 0xaaaaaaaa) {
++			printf ("SDRAM test fails at: %08x\n", (uint) p);
++			return 1;
++		}
++	}
++
++	for (p = pstart; p < pend; p++)
++		*p = 0x55555555;
++
++	for (p = pstart; p < pend; p++) {
++		if (*p != 0x55555555) {
++			printf ("SDRAM test fails at: %08x\n", (uint) p);
++			return 1;
++		}
++	}
++	return 0;
++}
++#endif
++
++/*************************************************************************
++ *  pci_pre_init
++ *
++ *  This routine is called just prior to registering the hose and gives
++ *  the board the opportunity to check things. Returning a value of zero
++ *  indicates that things are bad & PCI initialization should be aborted.
++ *
++ *	Different boards may wish to customize the pci controller structure
++ *	(add regions, override default access routines, etc) or perform
++ *	certain pre-initialization actions.
++ *
++ ************************************************************************/
++#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
++int pci_pre_init(struct pci_controller * hose )
++{
++	unsigned long strap;
++
++	/*--------------------------------------------------------------------------+
++	 *	The ocotea board is always configured as the host & requires the
++	 *	PCI arbiter to be enabled.
++	 *--------------------------------------------------------------------------*/
++	mfsdr(sdr_sdstp1, strap);
++	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
++		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
++		return 0;
++	}
++
++	/* FPGA Init */
++	alpr_fpga_init ();
++
++	return 1;
++}
++#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
++
++/*************************************************************************
++ *  pci_target_init
++ *
++ *	The bootstrap configuration provides default settings for the pci
++ *	inbound map (PIM). But the bootstrap config choices are limited and
++ *	may not be sufficient for a given board.
++ *
++ ************************************************************************/
++#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
++void pci_target_init(struct pci_controller * hose )
++{
++	/*--------------------------------------------------------------------------+
++	 * Disable everything
++	 *--------------------------------------------------------------------------*/
++	out32r( PCIX0_PIM0SA, 0 ); /* disable */
++	out32r( PCIX0_PIM1SA, 0 ); /* disable */
++	out32r( PCIX0_PIM2SA, 0 ); /* disable */
++	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
++
++	/*--------------------------------------------------------------------------+
++	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
++	 * options to not support sizes such as 128/256 MB.
++	 *--------------------------------------------------------------------------*/
++	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
++	out32r( PCIX0_PIM0LAH, 0 );
++	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
++
++	out32r( PCIX0_BAR0, 0 );
++
++	/*--------------------------------------------------------------------------+
++	 * Program the board's subsystem id/vendor id
++	 *--------------------------------------------------------------------------*/
++	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
++	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
++
++	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
++}
++#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
++
++/*************************************************************************
++ *  is_pci_host
++ *
++ *	This routine is called to determine if a pci scan should be
++ *	performed. With various hardware environments (especially cPCI and
++ *	PPMC) it's insufficient to depend on the state of the arbiter enable
++ *	bit in the strap register, or generic host/adapter assumptions.
++ *
++ *	Rather than hard-code a bad assumption in the general 440 code, the
++ *	440 pci code requires the board to decide at runtime.
++ *
++ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
++ *
++ *
++ ************************************************************************/
++#if defined(CONFIG_PCI)
++
++static void wait_for_pci_ready(void)
++{
++	/*
++	 * Configure EREADY as input
++	 */
++	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
++	udelay(1000);
++
++	for (;;) {
++		if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
++			return;
++	}
++
++}
++
++int is_pci_host(struct pci_controller *hose)
++{
++	wait_for_pci_ready();
++	return 1;		/* return 1 for host controller */
++}
++#endif /* defined(CONFIG_PCI) */
++
++/*************************************************************************
++ *  pci_master_init
++ *
++ ************************************************************************/
++#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
++void pci_master_init(struct pci_controller *hose)
++{
++	/*--------------------------------------------------------------------------+
++	  | PowerPC440 PCI Master configuration.
++	  | Map PLB/processor addresses to PCI memory space.
++	  |   PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
++	  |   Use byte reversed out routines to handle endianess.
++	  | Make this region non-prefetchable.
++	  +--------------------------------------------------------------------------*/
++	out32r( PCIX0_POM0SA, 0 ); /* disable */
++	out32r( PCIX0_POM1SA, 0 ); /* disable */
++	out32r( PCIX0_POM2SA, 0 ); /* disable */
++
++	out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
++	out32r(PCIX0_POM0LAH, 0x00000003);	/* PMM0 Local Address */
++	out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
++	out32r(PCIX0_POM0PCIAH, 0x00000000);	/* PMM0 PCI High Address */
++	out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
++
++	out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
++	out32r(PCIX0_POM1LAH, 0x00000003);	/* PMM0 Local Address */
++	out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
++	out32r(PCIX0_POM1PCIAH, 0x00000000);	/* PMM0 PCI High Address */
++	out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
++}
++#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
++
++#ifdef CONFIG_POST
++/*
++ * Returns 1 if keys pressed to start the power-on long-running tests
++ * Called from board_init_f().
++ */
++int post_hotkeys_pressed(void)
++{
++
++	return (ctrlc());
++}
++#endif
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/config.mk u-boot-1.1.6-fsl-1/board/prodrive/alpr/config.mk
+--- u-boot-1.1.6/board/prodrive/alpr/config.mk	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/config.mk	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,44 @@
++#
++# (C) Copyright 2004
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# AMCC 440GX Reference Platform (Ocotea) board
++#
++
++#TEXT_BASE = 0xFFFE0000
++
++ifeq ($(ramsym),1)
++TEXT_BASE = 0x07FD0000
++else
++TEXT_BASE = 0xFFFC0000
++endif
++
++PLATFORM_CPPFLAGS += -DCONFIG_440=1
++
++ifeq ($(debug),1)
++PLATFORM_CPPFLAGS += -DDEBUG
++endif
++
++ifeq ($(dbcr),1)
++PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
++endif
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/fpga.c u-boot-1.1.6-fsl-1/board/prodrive/alpr/fpga.c
+--- u-boot-1.1.6/board/prodrive/alpr/fpga.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/fpga.c	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,257 @@
++/*
++ * (C) Copyright 2006
++ * Heiko Schocher, DENX Software Engineering, hs@denx.de
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++/*
++ * Altera FPGA configuration support for the ALPR computer from prodrive
++ */
++
++#include <common.h>
++#include <altera.h>
++#include <ACEX1K.h>
++#include <command.h>
++#include <asm-ppc/processor.h>
++#include <ppc440.h>
++#include "fpga.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if defined(CONFIG_FPGA)
++
++#ifdef FPGA_DEBUG
++#define	PRINTF(fmt,args...)	printf (fmt ,##args)
++#else
++#define	PRINTF(fmt,args...)
++#endif
++
++static unsigned long regval;
++
++#define SET_GPIO_REG_0(reg, bit) {				\
++		regval = in32(reg);				\
++		regval &= ~(0x80000000 >> bit);			\
++		out32(reg, regval);				\
++	}
++
++#define SET_GPIO_REG_1(reg, bit) {				\
++		regval = in32(reg);				\
++		regval |= (0x80000000 >> bit);			\
++		out32(reg, regval);				\
++	}
++
++#define	SET_GPIO_0(bit)		SET_GPIO_REG_0(GPIO0_OR, bit)
++#define	SET_GPIO_1(bit)		SET_GPIO_REG_1(GPIO0_OR, bit)
++
++#define FPGA_PRG		(0x80000000 >> CFG_GPIO_PROG_EN)
++#define FPGA_CONFIG		(0x80000000 >> CFG_GPIO_CONFIG)
++#define FPGA_DATA		(0x80000000 >> CFG_GPIO_DATA)
++#define FPGA_CLK		(0x80000000 >> CFG_GPIO_CLK)
++#define OLD_VAL			(FPGA_PRG | FPGA_CONFIG)
++
++#define SET_FPGA(data)		out32(GPIO0_OR, data)
++
++#define FPGA_WRITE_1 {							\
++		SET_FPGA(OLD_VAL | 0        | FPGA_DATA);  /* set data to 1  */	\
++		SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
++
++#define FPGA_WRITE_0 {							\
++		SET_FPGA(OLD_VAL | 0        | 0        );   /* set data to 0  */ \
++		SET_FPGA(OLD_VAL | FPGA_CLK | 0        );}  /* set data to 1  */
++
++/* Plattforminitializations */
++/* Here we have to set the FPGA Chain */
++/* PROGRAM_PROG_EN	= HIGH */
++/* PROGRAM_SEL_DPR	= LOW */
++int fpga_pre_fn (int cookie)
++{
++	unsigned long	reg;
++
++	reg = in32(GPIO0_IR);
++	/* Enable the FPGA Chain */
++	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN);
++	SET_GPIO_1(CFG_GPIO_PROG_EN);
++	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
++	SET_GPIO_0((CFG_GPIO_SEL_DPR));
++
++	/* initialize the GPIO Pins */
++	/* output */
++	SET_GPIO_0(CFG_GPIO_CLK);
++	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK);
++
++	/* output */
++	SET_GPIO_0(CFG_GPIO_DATA);
++	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA);
++
++	/* First we set STATUS to 0 then as an input */
++	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
++	SET_GPIO_0(CFG_GPIO_STATUS);
++	SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
++
++	/* output */
++	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG);
++	SET_GPIO_0(CFG_GPIO_CONFIG);
++
++	/* input */
++	SET_GPIO_0(CFG_GPIO_CON_DON);
++	SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON);
++	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON);
++
++	/* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
++	SET_GPIO_0(CFG_GPIO_CONFIG);
++	return FPGA_SUCCESS;
++}
++
++/* Set the state of CONFIG Pin */
++int fpga_config_fn (int assert_config, int flush, int cookie)
++{
++	if (assert_config) {
++		SET_GPIO_1(CFG_GPIO_CONFIG);
++	} else {
++		SET_GPIO_0(CFG_GPIO_CONFIG);
++	}
++	return FPGA_SUCCESS;
++}
++
++/* Returns the state of STATUS Pin */
++int fpga_status_fn (int cookie)
++{
++	unsigned long	reg;
++
++	reg = in32(GPIO0_IR);
++	if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) {
++		PRINTF("STATUS = HIGH\n");
++		return FPGA_FAIL;
++	}
++	PRINTF("STATUS = LOW\n");
++	return FPGA_SUCCESS;
++}
++
++/* Returns the state of CONF_DONE Pin */
++int fpga_done_fn (int cookie)
++{
++	unsigned long	reg;
++	reg = in32(GPIO0_IR);
++	if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) {
++		PRINTF("CONF_DON = HIGH\n");
++		return FPGA_FAIL;
++	}
++	PRINTF("CONF_DON = LOW\n");
++	return FPGA_SUCCESS;
++}
++
++/* writes the complete buffer to the FPGA
++   writing the complete buffer in one function is much faster,
++   then calling it for every bit */
++int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
++{
++	size_t bytecount = 0;
++	unsigned char *data = (unsigned char *) buf;
++	unsigned char val=0;
++	int		i;
++	int len_40 = len / 40;
++
++	while (bytecount < len) {
++		val = data[bytecount++];
++		i = 8;
++		do {
++			if (val & 0x01) {
++				FPGA_WRITE_1;
++			} else {
++				FPGA_WRITE_0;
++			}
++			val >>= 1;
++			i --;
++		} while (i > 0);
++
++#ifdef CFG_FPGA_PROG_FEEDBACK
++		if (bytecount % len_40 == 0) {
++			putc ('.');		/* let them know we are alive */
++#ifdef CFG_FPGA_CHECK_CTRLC
++			if (ctrlc ())
++				return FPGA_FAIL;
++#endif
++		}
++#endif
++	}
++	return FPGA_SUCCESS;
++}
++
++/* called, when programming is aborted */
++int fpga_abort_fn (int cookie)
++{
++	SET_GPIO_1((CFG_GPIO_SEL_DPR));
++	return FPGA_SUCCESS;
++}
++
++/* called, when programming was succesful */
++int fpga_post_fn (int cookie)
++{
++	return fpga_abort_fn (cookie);
++}
++
++/* Note that these are pointers to code that is in Flash.  They will be
++ * relocated at runtime.
++ */
++Altera_CYC2_Passive_Serial_fns fpga_fns = {
++	fpga_pre_fn,
++	fpga_config_fn,
++	fpga_status_fn,
++	fpga_done_fn,
++	fpga_write_fn,
++	fpga_abort_fn,
++	fpga_post_fn
++};
++
++Altera_desc fpga[CONFIG_FPGA_COUNT] = {
++	{Altera_CYC2,
++	 passive_serial,
++	 Altera_EP2C35_SIZE,
++	 (void *) &fpga_fns,
++	 NULL,
++	 0}
++};
++
++/*
++ * Initialize the fpga.  Return 1 on success, 0 on failure.
++ */
++int alpr_fpga_init (void)
++{
++	int i;
++
++	PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
++	fpga_init (gd->reloc_off);
++
++	for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
++		PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
++		fpga_add (fpga_altera, &fpga[i]);
++	}
++	return 1;
++}
++
++#endif
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/init.S u-boot-1.1.6-fsl-1/board/prodrive/alpr/init.S
+--- u-boot-1.1.6/board/prodrive/alpr/init.S	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/init.S	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,103 @@
++/*
++ * (C) Copyright 2006
++ * Stefan Roese, DENX Software Engineering, sr@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <ppc_asm.tmpl>
++#include <config.h>
++
++/* General */
++#define TLB_VALID   0x00000200
++
++/* Supported page sizes */
++#define SZ_1K	    0x00000000
++#define SZ_4K	    0x00000010
++#define SZ_16K	    0x00000020
++#define SZ_64K	    0x00000030
++#define SZ_256K	    0x00000040
++#define SZ_1M	    0x00000050
++#define SZ_16M	    0x00000070
++#define SZ_256M	    0x00000090
++
++/* Storage attributes */
++#define SA_W	    0x00000800	    /* Write-through */
++#define SA_I	    0x00000400	    /* Caching inhibited */
++#define SA_M	    0x00000200	    /* Memory coherence */
++#define SA_G	    0x00000100	    /* Guarded */
++#define SA_E	    0x00000080	    /* Endian */
++
++/* Access control */
++#define AC_X	    0x00000024	    /* Execute */
++#define AC_W	    0x00000012	    /* Write */
++#define AC_R	    0x00000009	    /* Read */
++
++/* Some handy macros */
++
++#define EPN(e)		((e) & 0xfffffc00)
++#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
++#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
++#define TLB2(a)	( (a)&0x00000fbf )
++
++#define tlbtab_start\
++	mflr    r1  ;\
++	bl 0f	    ;
++
++#define tlbtab_end\
++	.long 0, 0, 0	;   \
++0:	mflr    r0	;   \
++	mtlr    r1	;   \
++	blr		;
++
++#define tlbentry(epn,sz,rpn,erpn,attr)\
++	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
++
++
++/**************************************************************************
++ * TLB TABLE
++ *
++ * This table is used by the cpu boot code to setup the initial tlb
++ * entries. Rather than make broad assumptions in the cpu source tree,
++ * this table lets each board set things up however they like.
++ *
++ *  Pointer to the table is returned in r1
++ *
++ *************************************************************************/
++
++	.section .bootpg,"ax"
++	.globl tlbtab
++
++tlbtab:
++	tlbtab_start
++	tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
++	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
++	tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
++	tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
++	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
++	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
++
++	/* PCI */
++	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
++	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
++	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
++
++	/* NAND */
++	tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
++	tlbtab_end
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/Makefile u-boot-1.1.6-fsl-1/board/prodrive/alpr/Makefile
+--- u-boot-1.1.6/board/prodrive/alpr/Makefile	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/Makefile	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,51 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS	= $(BOARD).o fpga.o nand.o
++SOBJS	= init.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(OBJS) $(SOBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend *~
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/nand.c u-boot-1.1.6-fsl-1/board/prodrive/alpr/nand.c
+--- u-boot-1.1.6/board/prodrive/alpr/nand.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/nand.c	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,173 @@
++/*
++ * (C) Copyright 2006
++ * Heiko Schocher, DENX Software Engineering, hs@denx.de
++ *
++ * (C) Copyright 2006
++ * Stefan Roese, DENX Software Engineering, sr@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++
++#if (CONFIG_COMMANDS & CFG_CMD_NAND)
++
++#include <asm/processor.h>
++#include <nand.h>
++
++struct alpr_ndfc_regs {
++	u8 cmd[4];
++	u8 addr_wait;
++	u8 term;
++	u8 dummy;
++	u8 dummy2;
++	u8 data;
++};
++
++static u8 hwctl;
++static struct alpr_ndfc_regs *alpr_ndfc = NULL;
++
++#define readb(addr)	(u8)(*(volatile u8 *)(addr))
++#define writeb(d,addr)	*(volatile u8 *)(addr) = ((u8)(d))
++
++/*
++ * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to
++ * the NAND devices.  The NDFC has command, address and data registers that
++ * when accessed will set up the NAND flash pins appropriately.  We'll use the
++ * hwcontrol function to save the configuration in a global variable.
++ * We can then use this information in the read and write functions to
++ * determine which NDFC register to access.
++ *
++ * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
++ */
++static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
++{
++	switch (cmd) {
++	case NAND_CTL_SETCLE:
++		hwctl |= 0x1;
++		break;
++	case NAND_CTL_CLRCLE:
++		hwctl &= ~0x1;
++		break;
++	case NAND_CTL_SETALE:
++		hwctl |= 0x2;
++		break;
++	case NAND_CTL_CLRALE:
++		hwctl &= ~0x2;
++		break;
++	case NAND_CTL_SETNCE:
++		break;
++	case NAND_CTL_CLRNCE:
++		writeb(0x00, &(alpr_ndfc->term));
++		break;
++	}
++}
++
++static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
++{
++	struct nand_chip *nand = mtd->priv;
++
++	if (hwctl & 0x1)
++		/*
++		 * IO_ADDR_W used as CMD[i] reg to support multiple NAND
++		 * chips.
++		 */
++		writeb(byte, nand->IO_ADDR_W);
++	else if (hwctl & 0x2) {
++		writeb(byte, &(alpr_ndfc->addr_wait));
++	} else
++		writeb(byte, &(alpr_ndfc->data));
++}
++
++static u_char alpr_nand_read_byte(struct mtd_info *mtd)
++{
++	return readb(&(alpr_ndfc->data));
++}
++
++static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++	struct nand_chip *nand = mtd->priv;
++	int i;
++
++	for (i = 0; i < len; i++) {
++		if (hwctl & 0x1)
++			 /*
++			  * IO_ADDR_W used as CMD[i] reg to support multiple NAND
++			  * chips.
++			  */
++			writeb(buf[i], nand->IO_ADDR_W);
++		else if (hwctl & 0x2)
++			writeb(buf[i], &(alpr_ndfc->addr_wait));
++		else
++			writeb(buf[i], &(alpr_ndfc->data));
++	}
++}
++
++static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++	int i;
++
++	for (i = 0; i < len; i++) {
++		buf[i] = readb(&(alpr_ndfc->data));
++	}
++}
++
++static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++	int i;
++
++	for (i = 0; i < len; i++)
++		if (buf[i] != readb(&(alpr_ndfc->data)))
++			return i;
++
++	return 0;
++}
++
++static int alpr_nand_dev_ready(struct mtd_info *mtd)
++{
++	volatile u_char val;
++
++	/*
++	 * Blocking read to wait for NAND to be ready
++	 */
++	val = readb(&(alpr_ndfc->addr_wait));
++
++	/*
++	 * Return always true
++	 */
++	return 1;
++}
++
++void board_nand_init(struct nand_chip *nand)
++{
++	alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
++
++	nand->eccmode = NAND_ECC_SOFT;
++
++	/* Reference hardware control function */
++	nand->hwcontrol  = alpr_nand_hwcontrol;
++	/* Set command delay time */
++	nand->write_byte = alpr_nand_write_byte;
++	nand->read_byte  = alpr_nand_read_byte;
++	nand->write_buf  = alpr_nand_write_buf;
++	nand->read_buf   = alpr_nand_read_buf;
++	nand->verify_buf = alpr_nand_verify_buf;
++	nand->dev_ready  = alpr_nand_dev_ready;
++}
++#endif
+diff -Naupr u-boot-1.1.6/board/prodrive/alpr/u-boot.lds u-boot-1.1.6-fsl-1/board/prodrive/alpr/u-boot.lds
+--- u-boot-1.1.6/board/prodrive/alpr/u-boot.lds	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/u-boot.lds	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,157 @@
++/*
++ * (C) Copyright 2004
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
++/* Do we need any of these for elf?
++   __DYNAMIC = 0;    */
++SECTIONS
++{
++  .resetvec 0xFFFFFFFC :
++  {
++    *(.resetvec)
++  } = 0xffff
++
++  .bootpg 0xFFFFF000 :
++  {
++    cpu/ppc4xx/start.o	(.bootpg)
++  } = 0xffff
++
++  /* Read-only sections, merged into text segment: */
++  . = + SIZEOF_HEADERS;
++  .interp : { *(.interp) }
++  .hash          : { *(.hash)		}
++  .dynsym        : { *(.dynsym)		}
++  .dynstr        : { *(.dynstr)		}
++  .rel.text      : { *(.rel.text)		}
++  .rela.text     : { *(.rela.text) 	}
++  .rel.data      : { *(.rel.data)		}
++  .rela.data     : { *(.rela.data) 	}
++  .rel.rodata    : { *(.rel.rodata) 	}
++  .rela.rodata   : { *(.rela.rodata) 	}
++  .rel.got       : { *(.rel.got)		}
++  .rela.got      : { *(.rela.got)		}
++  .rel.ctors     : { *(.rel.ctors)	}
++  .rela.ctors    : { *(.rela.ctors)	}
++  .rel.dtors     : { *(.rel.dtors)	}
++  .rela.dtors    : { *(.rela.dtors)	}
++  .rel.bss       : { *(.rel.bss)		}
++  .rela.bss      : { *(.rela.bss)		}
++  .rel.plt       : { *(.rel.plt)		}
++  .rela.plt      : { *(.rela.plt)		}
++  .init          : { *(.init)	}
++  .plt : { *(.plt) }
++  .text      :
++  {
++    /* WARNING - the following is hand-optimized to fit within	*/
++    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
++
++    cpu/ppc4xx/start.o	(.text)
++    board/prodrive/alpr/init.o	(.text)
++    cpu/ppc4xx/kgdb.o	(.text)
++    cpu/ppc4xx/traps.o	(.text)
++    cpu/ppc4xx/interrupts.o	(.text)
++    cpu/ppc4xx/serial.o	(.text)
++    cpu/ppc4xx/cpu_init.o	(.text)
++    cpu/ppc4xx/speed.o	(.text)
++    common/dlmalloc.o	(.text)
++    lib_generic/crc32.o		(.text)
++    lib_ppc/extable.o	(.text)
++    lib_generic/zlib.o		(.text)
++
++/*    . = env_offset;*/
++/*    common/environment.o(.text)*/
++
++    *(.text)
++    *(.fixup)
++    *(.got1)
++  }
++  _etext = .;
++  PROVIDE (etext = .);
++  .rodata    :
++  {
++    *(.rodata)
++    *(.rodata1)
++    *(.rodata.str1.4)
++    *(.eh_frame)
++  }
++  .fini      : { *(.fini)    } =0
++  .ctors     : { *(.ctors)   }
++  .dtors     : { *(.dtors)   }
++
++  /* Read-write section, merged into data segment: */
++  . = (. + 0x00FF) & 0xFFFFFF00;
++  _erotext = .;
++  PROVIDE (erotext = .);
++  .reloc   :
++  {
++    *(.got)
++    _GOT2_TABLE_ = .;
++    *(.got2)
++    _FIXUP_TABLE_ = .;
++    *(.fixup)
++  }
++  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
++  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
++
++  .data    :
++  {
++    *(.data)
++    *(.data1)
++    *(.sdata)
++    *(.sdata2)
++    *(.dynamic)
++    CONSTRUCTORS
++  }
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  . = .;
++  __u_boot_cmd_start = .;
++  .u_boot_cmd : { *(.u_boot_cmd) }
++  __u_boot_cmd_end = .;
++
++
++  . = .;
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  . = ALIGN(256);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(256);
++  __init_end = .;
++
++  __bss_start = .;
++  .bss       :
++  {
++   *(.sbss) *(.scommon)
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++  }
++  _end = . ;
++  PROVIDE (end = .);
++}
+diff -Naupr u-boot-1.1.6/board/prodrive/common/flash.c u-boot-1.1.6-fsl-1/board/prodrive/common/flash.c
+--- u-boot-1.1.6/board/prodrive/common/flash.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/common/flash.c	2006-11-30 12:34:13.000000000 -0600
+@@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info
+ 	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+ 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+ 	case FLASH_MAN_SST:	printf ("SST ");		break;
++	case FLASH_MAN_STM:	printf ("ST ");			break;
+ 	case FLASH_MAN_EXCEL:	printf ("Excel Semiconductor "); break;
+ 	default:		printf ("Unknown Vendor ");	break;
+ 	}
+@@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *add
+ 	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+ 		info->flash_id = FLASH_MAN_SST;
+ 		break;
++	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
++		info->flash_id = FLASH_MAN_STM;
++		break;
+ 	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
+ 		info->flash_id = FLASH_MAN_EXCEL;
+ 		break;
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/64460.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/64460.h
+--- u-boot-1.1.6/board/prodrive/p3mx/64460.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/64460.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,52 @@
++/*
++ * (C) Copyright 2003
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * main board support/init for the Galileo Eval board DB64460.
++ */
++
++#ifndef __64460_H__
++#define __64460_H__
++
++/* CPU Configuration bits */
++#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
++#define	CPU_CONF_SINGLE_CPU	(1 << 11)
++#define	CPU_CONF_ENDIANESS	(1 << 12)
++#define CPU_CONF_PIPELINE	(1 << 13)
++#define CPU_CONF_STOP_RETRY	(1 << 17)
++#define CPU_CONF_MULTI_DECODE	(1 << 18)
++#define CPU_CONF_DP_VALID	(1 << 19)
++#define CPU_CONF_PERR_PROP	(1 << 22)
++#define CPU_CONF_AACK_DELAY_2	(1 << 25)
++#define CPU_CONF_AP_VALID	(1 << 26)
++#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
++
++/* CPU Master Control bits */
++#define CPU_MAST_CTL_ARB_EN	(1 << 8)
++#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
++#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
++#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
++#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
++#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
++
++#endif /* __64460_H__ */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/config.mk u-boot-1.1.6-fsl-1/board/prodrive/p3mx/config.mk
+--- u-boot-1.1.6/board/prodrive/p3mx/config.mk	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/config.mk	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,28 @@
++#
++# (C) Copyright 2002-2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# p3mx boards (P3M750 & P3M7448)
++#
++
++TEXT_BASE = 0xfff00000
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/eth.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/eth.h
+--- u-boot-1.1.6/board/prodrive/p3mx/eth.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/eth.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,43 @@
++/*
++ * (C) Copyright 2001
++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * eth.h - header file for the polled mode GT ethernet driver
++ */
++
++#ifndef __EVB64360_ETH_H__
++#define __EVB64360_ETH_H__
++
++#include <asm/types.h>
++#include <asm/io.h>
++#include <asm/byteorder.h>
++#include <common.h>
++
++
++int db64360_eth0_poll(void);
++int db64360_eth0_transmit(unsigned int s, volatile char *p);
++void db64360_eth0_disable(void);
++bool network_start(bd_t *bis);
++
++
++#endif /* __EVB64360_ETH_H__ */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/Makefile u-boot-1.1.6-fsl-1/board/prodrive/p3mx/Makefile
+--- u-boot-1.1.6/board/prodrive/p3mx/Makefile	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/Makefile	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,55 @@
++#
++# (C) Copyright 2002-2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++ifneq ($(OBJTREE),$(SRCTREE))
++$(shell mkdir -p $(obj)../../Marvell/common)
++endif
++
++LIB	= $(obj)lib$(BOARD).a
++
++SOBJS	= misc.o
++COBJS	= $(BOARD).o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \
++		../../Marvell/common/i2c.o ../../Marvell/common/memory.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend *~
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/misc.S u-boot-1.1.6-fsl-1/board/prodrive/p3mx/misc.S
+--- u-boot-1.1.6/board/prodrive/p3mx/misc.S	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/misc.S	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,245 @@
++#include <config.h>
++#include <74xx_7xx.h>
++#include "version.h"
++
++#include <ppc_asm.tmpl>
++#include <ppc_defs.h>
++
++#include <asm/cache.h>
++#include <asm/mmu.h>
++
++#include "../../Marvell/include/mv_gen_reg.h"
++
++#ifdef CONFIG_ECC
++	/* Galileo specific asm code for initializing ECC */
++	.globl board_relocate_rom
++board_relocate_rom:
++	mflr	r7
++	/* update the location of the GT registers */
++	lis	r11, CFG_GT_REGS@h
++	/* if we're using ECC, we must use the DMA engine to copy ourselves */
++	bl	start_idma_transfer_0
++	bl	wait_for_idma_0
++	bl	stop_idma_engine_0
++
++	mtlr	r7
++	blr
++
++	.globl board_init_ecc
++board_init_ecc:
++	mflr	r7
++	/* NOTE: r10 still contains the location we've been relocated to
++	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
++
++	/* now that we're running from ram, init the rest of main memory
++	 * for ECC use */
++	lis	r8, CFG_MONITOR_LEN@h
++	ori	r8, r8, CFG_MONITOR_LEN@l
++
++	divw	r3, r10, r8
++
++	/* set up the counter, and init the starting address */
++	mtctr	r3
++	li	r12, 0
++
++	/* bytes per transfer */
++	mr	r5, r8
++about_to_init_ecc:
++1:	mr	r3, r12
++	mr	r4, r12
++	bl	start_idma_transfer_0
++	bl	wait_for_idma_0
++	bl	stop_idma_engine_0
++	add	r12, r12, r8
++	bdnz	1b
++
++	mtlr	r7
++	blr
++
++	/* r3:	dest addr
++	 * r4:	source addr
++	 * r5:	byte count
++	 * r11: gt regbase
++	 * trashes:	 r6, r5
++	 */
++start_idma_transfer_0:
++	/* set the byte count, including the OWN bit */
++	mr	r6, r11
++	ori	r6, r6, CHANNEL0_DMA_BYTE_COUNT
++	stwbrx	r5, 0, (r6)
++
++	/* set the source address */
++	mr	r6, r11
++	ori	r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
++	stwbrx	r4, 0, (r6)
++
++	/* set the dest address */
++	mr	r6, r11
++	ori	r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
++	stwbrx	r3, 0, (r6)
++
++	/* set the next record pointer */
++	li	r5, 0
++	mr	r6, r11
++	ori	r6, r6, CHANNEL0NEXT_RECORD_POINTER
++	stwbrx	r5, 0, (r6)
++
++	/* set the low control register */
++	/* bit 9 is NON chained mode, bit 31 is new style descriptors.
++	   bit 12 is channel enable */
++	ori	r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
++	/* 15 shifted by 16 (oris) == bit 31 */
++	oris	r5, r5, (1 << 15)
++	mr	r6, r11
++	ori	r6, r6, CHANNEL0CONTROL
++	stwbrx	r5, 0, (r6)
++
++	blr
++
++	/* this waits for the bytecount to return to zero, indicating
++	 * that the trasfer is complete */
++wait_for_idma_0:
++	mr	r5, r11
++	lis	r6, 0xff
++	ori	r6, r6, 0xffff
++	ori	r5, r5, CHANNEL0_DMA_BYTE_COUNT
++1:	lwbrx	r4, 0, (r5)
++	and.	r4, r4, r6
++	bne	1b
++
++	blr
++
++	/* this turns off channel 0 of the idma engine */
++stop_idma_engine_0:
++	/* shut off the DMA engine */
++	li	r5, 0
++	mr	r6, r11
++	ori	r6, r6, CHANNEL0CONTROL
++	stwbrx	r5, 0, (r6)
++
++	blr
++#endif
++
++#ifdef CFG_BOARD_ASM_INIT
++	/* NOTE: trashes r3-r7 */
++	.globl board_asm_init
++board_asm_init:
++	/* just move the GT registers to where they belong */
++	lis	r3, CFG_DFL_GT_REGS@h
++	ori	r3, r3, CFG_DFL_GT_REGS@l
++	lis	r4, CFG_GT_REGS@h
++	ori	r4, r4, CFG_GT_REGS@l
++	li	r5, INTERNAL_SPACE_DECODE
++
++	/* test to see if we've already moved */
++	lwbrx	r6, r5, r4
++	andi.	r6, r6, 0xffff
++	/* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
++/*	rlwinm	r7, r4, 8, 16, 31
++	rlwinm	r7, r4, 12, 16, 31	*/ /* original */
++	rlwinm	r7, r4, 16, 16, 31
++	/* -----------------------------------------------------*/
++	cmp	cr0, r7, r6
++	beqlr
++
++	/* nope, have to move the registers */
++	lwbrx	r6, r5, r3
++	andis.	r6, r6, 0xffff
++	or	r6, r6, r7
++	stwbrx	r6, r5, r3
++
++	/* now, poll for the change */
++1:	lwbrx	r7, r5, r4
++	cmp	cr0, r7, r6
++	bne	1b
++
++	lis	r3, CFG_INT_SRAM_BASE@h
++	ori	r3, r3, CFG_INT_SRAM_BASE@l
++	rlwinm  r3, r3, 16, 16, 31
++	lis	r4, CFG_GT_REGS@h
++	ori	r4, r4, CFG_GT_REGS@l
++	li	r5, INTEGRATED_SRAM_BASE_ADDR
++	stwbrx  r3, r5, r4
++
++2:	lwbrx	r6, r5, r4
++	cmp	cr0, r3, r6
++	bne	2b
++
++	/* done! */
++	blr
++#endif
++
++/* For use of the debug LEDs */
++	.global led_on0_relocated
++led_on0_relocated:
++	xor	r21, r21, r21
++	xor	r18, r18, r18
++	lis	r18, 0xFC80
++	ori	r18, r18, 0x8000
++/*	stw	r21, 0x0(r18)   */
++	sync
++	blr
++
++	.global led_off0_relocated
++led_off0_relocated:
++	xor	r21, r21, r21
++	xor	r18, r18, r18
++	lis	r18, 0xFC81
++	ori	r18, r18, 0x4000
++/*	stw	r21, 0x0(r18)   */
++	sync
++	blr
++
++	.global led_on0
++led_on0:
++	xor	r18, r18, r18
++	lis	r18, 0x1c80
++	ori	r18, r18, 0x8000
++/*	stw	r18, 0x0(r18)  */
++	sync
++	blr
++
++	.global led_off0
++led_off0:
++	xor	r18, r18, r18
++	lis	r18, 0x1c81
++	ori	r18, r18, 0x4000
++/*	stw	r18, 0x0(r18)  */
++	sync
++	blr
++
++	.global led_on1
++led_on1:
++	xor	r18, r18, r18
++	lis	r18, 0x1c80
++	ori	r18, r18, 0xc000
++/*	stw	r18, 0x0(r18)  */
++	sync
++	blr
++
++	.global led_off1
++led_off1:
++	xor	r18, r18, r18
++	lis	r18, 0x1c81
++	ori	r18, r18, 0x8000
++/*	stw	r18, 0x0(r18)  */
++	sync
++	blr
++
++	.global led_on2
++led_on2:
++	xor	r18, r18, r18
++	lis	r18, 0x1c81
++	ori	r18, r18, 0x0000
++/*	stw	r18, 0x0(r18)  */
++	sync
++	blr
++
++	.global led_off2
++led_off2:
++	xor	r18, r18, r18
++	lis	r18, 0x1c81
++	ori	r18, r18, 0xc000
++/*	stw	r18, 0x0(r18)  */
++	sync
++	blr
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mpsc.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.c
+--- u-boot-1.1.6/board/prodrive/p3mx/mpsc.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,1013 @@
++/*
++ * (C) Copyright 2001
++ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*************************************************************************
++ * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
++ *
++  ************************************************************************/
++
++/*
++ * mpsc.c - driver for console over the MPSC.
++ */
++
++
++#include <common.h>
++#include <config.h>
++#include <asm/cache.h>
++
++#include <malloc.h>
++#include "mpsc.h"
++
++#include "mv_regs.h"
++
++#include "../../Marvell/include/memory.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++/* Define this if you wish to use the MPSC as a register based UART.
++ * This will force the serial port to not use the SDMA engine at all.
++ */
++#undef CONFIG_MPSC_DEBUG_PORT
++
++
++int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
++char (*mpsc_getchar) (void) = mpsc_getchar_debug;
++int (*mpsc_test_char) (void) = mpsc_test_char_debug;
++
++
++static volatile unsigned int *rx_desc_base = NULL;
++static unsigned int rx_desc_index = 0;
++static volatile unsigned int *tx_desc_base = NULL;
++static unsigned int tx_desc_index = 0;
++
++/* local function declarations */
++static int galmpsc_connect (int channel, int connect);
++static int galmpsc_route_rx_clock (int channel, int brg);
++static int galmpsc_route_tx_clock (int channel, int brg);
++static int galmpsc_write_config_regs (int mpsc, int mode);
++static int galmpsc_config_channel_regs (int mpsc);
++static int galmpsc_set_char_length (int mpsc, int value);
++static int galmpsc_set_stop_bit_length (int mpsc, int value);
++static int galmpsc_set_parity (int mpsc, int value);
++static int galmpsc_enter_hunt (int mpsc);
++static int galmpsc_set_brkcnt (int mpsc, int value);
++static int galmpsc_set_tcschar (int mpsc, int value);
++static int galmpsc_set_snoop (int mpsc, int value);
++static int galmpsc_shutdown (int mpsc);
++
++static int galsdma_set_RFT (int channel);
++static int galsdma_set_SFM (int channel);
++static int galsdma_set_rxle (int channel);
++static int galsdma_set_txle (int channel);
++static int galsdma_set_burstsize (int channel, unsigned int value);
++static int galsdma_set_RC (int channel, unsigned int value);
++
++static int galbrg_set_CDV (int channel, int value);
++static int galbrg_enable (int channel);
++static int galbrg_disable (int channel);
++static int galbrg_set_clksrc (int channel, int value);
++static int galbrg_set_CUV (int channel, int value);
++
++static void galsdma_enable_rx (void);
++static int galsdma_set_mem_space (unsigned int memSpace,
++				  unsigned int memSpaceTarget,
++				  unsigned int memSpaceAttr,
++				  unsigned int baseAddress,
++				  unsigned int size);
++
++
++#define SOFTWARE_CACHE_MANAGEMENT
++
++#ifdef SOFTWARE_CACHE_MANAGEMENT
++#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
++#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
++#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
++#else
++#define FLUSH_DCACHE(a,b)
++#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
++#define INVALIDATE_DCACHE(a,b)
++#endif
++
++#ifdef CONFIG_MPSC_DEBUG_PORT
++static void mpsc_debug_init (void)
++{
++
++	volatile unsigned int temp;
++
++	/* Clear the CFR  (CHR4) */
++	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
++	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
++	temp &= 0xffffff00;
++	temp |= BIT29;
++	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
++		      temp);
++
++	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
++	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
++	temp |= (BIT12 | BIT15);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
++		      temp);
++
++	/* Set int mask */
++	temp = GTREGREAD (GALMPSC_0_INT_MASK);
++	temp |= BIT6;
++	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
++}
++#endif
++
++char mpsc_getchar_debug (void)
++{
++	volatile int temp;
++	volatile unsigned int cause;
++
++	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
++	while ((cause & BIT6) == 0) {
++		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
++	}
++
++	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
++			  (CHANNEL * GALMPSC_REG_GAP));
++	/* By writing 1's to the set bits, the register is cleared */
++	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
++		      temp);
++	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
++	return (temp >> 16) & 0xff;
++}
++
++/* special function for running out of flash.  doesn't modify any
++ * global variables [josh] */
++int mpsc_putchar_early (char ch)
++{
++	int mpsc = CHANNEL;
++	int temp =
++		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
++	galmpsc_set_tcschar (mpsc, ch);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
++		      temp | 0x200);
++
++#define MAGIC_FACTOR	(10*1000000)
++
++	udelay (MAGIC_FACTOR / gd->baudrate);
++	return 0;
++}
++
++/* This is used after relocation, see serial.c and mpsc_init2 */
++static int mpsc_putchar_sdma (char ch)
++{
++	volatile unsigned int *p;
++	unsigned int temp;
++
++
++	/* align the descriptor */
++	p = tx_desc_base;
++	memset ((void *) p, 0, 8 * sizeof (unsigned int));
++
++	/* fill one 64 bit buffer */
++	/* word swap, pad with 0 */
++	p[4] = 0;		/* x */
++	p[5] = (unsigned int) ch;	/* x */
++
++	/* CHANGED completely according to GT64260A dox - NTL */
++	p[0] = 0x00010001;	/* 0 */
++	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
++	p[2] = 0;		/* 8 */
++	p[3] = (unsigned int) &p[4];	/* c */
++
++#if 0
++	p[9] = DESC_FIRST | DESC_LAST;
++	p[10] = (unsigned int) &p[0];
++	p[11] = (unsigned int) &p[12];
++#endif
++
++	FLUSH_DCACHE (&p[0], &p[8]);
++
++	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
++		      (unsigned int) &p[0]);
++	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
++		      (unsigned int) &p[0]);
++
++	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
++	temp |= (TX_DEMAND | TX_STOP);
++	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
++
++	INVALIDATE_DCACHE (&p[1], &p[2]);
++
++	while (p[1] & DESC_OWNER_BIT) {
++		udelay (100);
++		INVALIDATE_DCACHE (&p[1], &p[2]);
++	}
++	return 0;
++}
++
++char mpsc_getchar_sdma (void)
++{
++	static unsigned int done = 0;
++	volatile char ch;
++	unsigned int len = 0, idx = 0, temp;
++
++	volatile unsigned int *p;
++
++
++	do {
++		p = &rx_desc_base[rx_desc_index * 8];
++
++		INVALIDATE_DCACHE (&p[0], &p[1]);
++		/* Wait for character */
++		while (p[1] & DESC_OWNER_BIT) {
++			udelay (100);
++			INVALIDATE_DCACHE (&p[0], &p[1]);
++		}
++
++		/* Handle error case */
++		if (p[1] & (1 << 15)) {
++			printf ("oops, error: %08x\n", p[1]);
++
++			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
++					  (CHANNEL * GALMPSC_REG_GAP));
++			temp |= (1 << 23);
++			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
++				      (CHANNEL * GALMPSC_REG_GAP), temp);
++
++			/* Can't poll on abort bit, so we just wait. */
++			udelay (100);
++
++			galsdma_enable_rx ();
++		}
++
++		/* Number of bytes left in this descriptor */
++		len = p[0] & 0xffff;
++
++		if (len) {
++			/* Where to look */
++			idx = 5;
++			if (done > 3)
++				idx = 4;
++			if (done > 7)
++				idx = 7;
++			if (done > 11)
++				idx = 6;
++
++			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
++			ch = p[idx] & 0xff;
++			done++;
++		}
++
++		if (done < len) {
++			/* this descriptor has more bytes still
++			 * shift down the char we just read, and leave the
++			 * buffer in place for the next time around
++			 */
++			p[idx] = p[idx] >> 8;
++			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
++		}
++
++		if (done == len) {
++			/* nothing left in this descriptor.
++			 * go to next one
++			 */
++			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
++			p[0] = 0x00100000;
++			FLUSH_DCACHE (&p[0], &p[1]);
++			/* Next descriptor */
++			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
++			done = 0;
++		}
++	} while (len == 0);	/* galileo bug.. len might be zero */
++
++	return ch;
++}
++
++
++int mpsc_test_char_debug (void)
++{
++	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
++		return 0;
++	else {
++		return 1;
++	}
++}
++
++
++int mpsc_test_char_sdma (void)
++{
++	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
++
++	INVALIDATE_DCACHE (&p[1], &p[2]);
++
++	if (p[1] & DESC_OWNER_BIT)
++		return 0;
++	else
++		return 1;
++}
++
++int mpsc_init (int baud)
++{
++	/* BRG CONFIG */
++	galbrg_set_baudrate (CHANNEL, baud);
++	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
++	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
++	galbrg_enable (CHANNEL);	/* Enable BRG */
++
++	/* Set up clock routing */
++	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
++
++	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
++	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
++
++	/* reset MPSC state */
++	galmpsc_shutdown (CHANNEL);
++
++	/* SDMA CONFIG */
++	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
++	galsdma_set_txle (CHANNEL);
++	galsdma_set_rxle (CHANNEL);
++	galsdma_set_RC (CHANNEL, 0xf);
++	galsdma_set_SFM (CHANNEL);
++	galsdma_set_RFT (CHANNEL);
++
++	/* MPSC CONFIG */
++	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
++	galmpsc_config_channel_regs (CHANNEL);
++	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
++	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
++	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
++
++#ifdef CONFIG_MPSC_DEBUG_PORT
++	mpsc_debug_init ();
++#endif
++
++	/* COMM_MPSC CONFIG */
++#ifdef SOFTWARE_CACHE_MANAGEMENT
++	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
++#else
++	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
++#endif
++
++	return 0;
++}
++
++
++void mpsc_sdma_init (void)
++{
++	/* Setup SDMA channel0 SDMA_CONFIG_REG*/
++	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
++
++	/*  Enable MPSC-Window0 for DRAM Bank 0 */
++	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT,
++				   MV64460_SDMA_DRAM_CS_0_TARGET,
++				   0,
++				   memoryGetBankBaseAddress(0),
++				   memoryGetBankSize(0)) != true)
++		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
++			__FUNCTION__);
++
++
++	/*  Enable MPSC-Window1 for DRAM Bank 1 */
++	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT,
++				   MV64460_SDMA_DRAM_CS_1_TARGET,
++				   0,
++				   memoryGetBankBaseAddress(1),
++				   memoryGetBankSize(1)) != true)
++		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
++			__FUNCTION__);
++
++
++	/*  Disable MPSC-Window2 */
++	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT,
++				   MV64460_SDMA_DRAM_CS_2_TARGET,
++				   0,
++				   memoryGetBankBaseAddress(2),
++				   memoryGetBankSize(2)) != true)
++		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
++			__FUNCTION__);
++
++
++	/*  Disable MPSC-Window3 */
++	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT,
++				   MV64460_SDMA_DRAM_CS_3_TARGET,
++				   0,
++				   memoryGetBankBaseAddress(3),
++				   memoryGetBankSize(3)) != true)
++		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
++			__FUNCTION__);
++
++	/*  Setup MPSC0 access mode Window0 full access */
++	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
++			 (MV64460_SDMA_WIN_ACCESS_FULL <<
++			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
++
++	/*  Setup MPSC1 access mode Window1 full access */
++	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
++			 (MV64460_SDMA_WIN_ACCESS_FULL <<
++			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
++
++	/* Setup MPSC internal address space base address 	*/
++	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
++
++	/* no high address remap*/
++	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
++	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
++
++	/* clear interrupt cause register for MPSC (fault register)*/
++	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
++}
++
++
++void mpsc_init2 (void)
++{
++	int i;
++
++#ifndef CONFIG_MPSC_DEBUG_PORT
++	mpsc_putchar = mpsc_putchar_sdma;
++	mpsc_getchar = mpsc_getchar_sdma;
++	mpsc_test_char = mpsc_test_char_sdma;
++#endif
++	/* RX descriptors */
++	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
++						sizeof (unsigned int));
++
++	/* align descriptors */
++	rx_desc_base = (unsigned int *)
++		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
++
++	rx_desc_index = 0;
++
++	memset ((void *) rx_desc_base, 0,
++		(RX_DESC * 8) * sizeof (unsigned int));
++
++	for (i = 0; i < RX_DESC; i++) {
++		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
++		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
++		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
++		rx_desc_base[i * 8] = 0x00100000;
++	}
++	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
++
++	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
++	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
++		      (unsigned int) &rx_desc_base[0]);
++
++	/* TX descriptors */
++	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
++						sizeof (unsigned int));
++
++	/* align descriptors */
++	tx_desc_base = (unsigned int *)
++		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
++
++	tx_desc_index = -1;
++
++	memset ((void *) tx_desc_base, 0,
++		(TX_DESC * 8) * sizeof (unsigned int));
++
++	for (i = 0; i < TX_DESC; i++) {
++		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
++		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
++		tx_desc_base[i * 8 + 3] =
++			(unsigned int) &tx_desc_base[i * 8 + 4];
++		tx_desc_base[i * 8 + 2] =
++			(unsigned int) &tx_desc_base[(i + 1) * 8];
++		tx_desc_base[i * 8 + 1] =
++			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
++
++		/* set sbytecnt and shadow byte cnt to 1 */
++		tx_desc_base[i * 8] = 0x00010001;
++	}
++	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
++
++	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
++
++	udelay (100);
++
++	galsdma_enable_rx ();
++
++	return;
++}
++
++int galbrg_set_baudrate (int channel, int rate)
++{
++	int clock;
++
++	galbrg_disable (channel);	/*ok */
++
++#ifdef ZUMA_NTL
++	/* from tclk */
++	clock = (CFG_TCLK / (16 * rate)) - 1;
++#else
++	clock = (CFG_TCLK / (16 * rate)) - 1;
++#endif
++
++	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
++
++	galbrg_enable (channel);
++
++	gd->baudrate = rate;
++
++	return 0;
++}
++
++/* ------------------------------------------------------------------ */
++
++/* Below are all the private functions that no one else needs */
++
++static int galbrg_set_CDV (int channel, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
++	temp &= 0xFFFF0000;
++	temp |= (value & 0x0000FFFF);
++	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galbrg_enable (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
++	temp |= 0x00010000;
++	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galbrg_disable (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
++	temp &= 0xFFFEFFFF;
++	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galbrg_set_clksrc (int channel, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
++	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
++	temp |= (value << 18);
++	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
++	return 0;
++}
++
++static int galbrg_set_CUV (int channel, int value)
++{
++	/* set CountUpValue */
++	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
++
++	return 0;
++}
++
++#if 0
++static int galbrg_reset (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
++	temp |= 0x20000;
++	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
++
++	return 0;
++}
++#endif
++
++static int galsdma_set_RFT (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
++	temp |= 0x00000001;
++	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
++		      temp);
++
++	return 0;
++}
++
++static int galsdma_set_SFM (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
++	temp |= 0x00000002;
++	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
++		      temp);
++
++	return 0;
++}
++
++static int galsdma_set_rxle (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
++	temp |= 0x00000040;
++	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
++		      temp);
++
++	return 0;
++}
++
++static int galsdma_set_txle (int channel)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
++	temp |= 0x00000080;
++	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
++		      temp);
++
++	return 0;
++}
++
++static int galsdma_set_RC (int channel, unsigned int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
++	temp &= ~0x0000003c;
++	temp |= (value << 2);
++	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
++		      temp);
++
++	return 0;
++}
++
++static int galsdma_set_burstsize (int channel, unsigned int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
++	temp &= 0xFFFFCFFF;
++	switch (value) {
++	case 8:
++		GT_REG_WRITE (GALSDMA_0_CONF_REG +
++			      (channel * GALSDMA_REG_DIFF),
++			      (temp | (0x3 << 12)));
++		break;
++
++	case 4:
++		GT_REG_WRITE (GALSDMA_0_CONF_REG +
++			      (channel * GALSDMA_REG_DIFF),
++			      (temp | (0x2 << 12)));
++		break;
++
++	case 2:
++		GT_REG_WRITE (GALSDMA_0_CONF_REG +
++			      (channel * GALSDMA_REG_DIFF),
++			      (temp | (0x1 << 12)));
++		break;
++
++	case 1:
++		GT_REG_WRITE (GALSDMA_0_CONF_REG +
++			      (channel * GALSDMA_REG_DIFF),
++			      (temp | (0x0 << 12)));
++		break;
++
++	default:
++		return -1;
++		break;
++	}
++
++	return 0;
++}
++
++static int galmpsc_connect (int channel, int connect)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
++
++	if ((channel == 0) && connect)
++		temp &= ~0x00000007;
++	else if ((channel == 1) && connect)
++		temp &= ~(0x00000007 << 6);
++	else if ((channel == 0) && !connect)
++		temp |= 0x00000007;
++	else
++		temp |= (0x00000007 << 6);
++
++	/* Just in case... */
++	temp &= 0x3fffffff;
++
++	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
++
++	return 0;
++}
++
++static int galmpsc_route_rx_clock (int channel, int brg)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
++
++	if (channel == 0) {
++		temp &= ~0x0000000F;
++		temp |= brg;
++	} else {
++		temp &= ~0x00000F00;
++		temp |= (brg << 8);
++	}
++
++	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
++
++	return 0;
++}
++
++static int galmpsc_route_tx_clock (int channel, int brg)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
++
++	if (channel == 0) {
++		temp &= ~0x0000000F;
++		temp |= brg;
++	} else {
++		temp &= ~0x00000F00;
++		temp |= (brg << 8);
++	}
++
++	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
++
++	return 0;
++}
++
++static int galmpsc_write_config_regs (int mpsc, int mode)
++{
++	if (mode == GALMPSC_UART) {
++		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
++		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
++			      0x000004c4);
++
++		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
++		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
++			      0x024003f8);
++		/*        22 2222 1111 */
++		/*        54 3210 9876 */
++		/* 0000 0010 0000 0000 */
++		/*       1 */
++		/*       098 7654 3210 */
++		/* 0000 0011 1111 1000 */
++	} else
++		return -1;
++
++	return 0;
++}
++
++static int galmpsc_config_channel_regs (int mpsc)
++{
++	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
++
++	galmpsc_set_brkcnt (mpsc, 0x3);
++	galmpsc_set_tcschar (mpsc, 0xab);
++
++	return 0;
++}
++
++static int galmpsc_set_brkcnt (int mpsc, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
++	temp &= 0x0000FFFF;
++	temp |= (value << 16);
++	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galmpsc_set_tcschar (int mpsc, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
++	temp &= 0xFFFF0000;
++	temp |= value;
++	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galmpsc_set_char_length (int mpsc, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
++	temp &= 0xFFFFCFFF;
++	temp |= (value << 12);
++	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galmpsc_set_stop_bit_length (int mpsc, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
++	temp &= 0xFFFFBFFF;
++	temp |= (value << 14);
++	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galmpsc_set_parity (int mpsc, int value)
++{
++	unsigned int temp;
++
++	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
++	if (value != -1) {
++		temp &= 0xFFF3FFF3;
++		temp |= ((value << 18) | (value << 2));
++		temp |= ((value << 17) | (value << 1));
++	} else {
++		temp &= 0xFFF1FFF1;
++	}
++
++	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
++
++	return 0;
++}
++
++static int galmpsc_enter_hunt (int mpsc)
++{
++	int temp;
++
++	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
++	temp |= 0x80000000;
++	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
++
++	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
++	       MPSC_ENTER_HUNT) {
++		udelay (1);
++	}
++	return 0;
++}
++
++
++static int galmpsc_shutdown (int mpsc)
++{
++	unsigned int temp;
++
++	/* cause RX abort (clears RX) */
++	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
++	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
++	temp &= ~MPSC_ENTER_HUNT;
++	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
++
++	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
++	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
++
++	/* shut down the MPSC */
++	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
++	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
++	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
++
++	udelay (100);
++
++	/* shut down the sdma engines. */
++	/* reset config to default */
++	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
++
++	udelay (100);
++
++	/* clear the SDMA current and first TX and RX pointers */
++	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
++	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
++	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
++
++	udelay (100);
++
++	return 0;
++}
++
++static void galsdma_enable_rx (void)
++{
++	int temp;
++
++	/* Enable RX processing */
++	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
++	temp |= RX_ENABLE;
++	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
++
++	galmpsc_enter_hunt (CHANNEL);
++}
++
++static int galmpsc_set_snoop (int mpsc, int value)
++{
++	int reg =
++		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
++		MPSC_0_ADDRESS_CONTROL_LOW;
++	int temp = GTREGREAD (reg);
++
++	if (value)
++		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
++	else
++		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
++	GT_REG_WRITE (reg, temp);
++	return 0;
++}
++
++/*******************************************************************************
++* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map.
++*
++* DESCRIPTION:
++*       the MV64460 SDMA has its own address decoding map that is de-coupled
++*       from the CPU interface address decoding windows. The SDMA channels
++*       share four address windows. Each region can be individually configured
++*       by this function by associating it to a target interface and setting
++*       base and size values.
++*
++*      NOTE!!!
++*       The size must be in 64Kbyte granularity.
++*       The base address must be aligned to the size.
++*       The size must be a series of 1s followed by a series of zeros
++*
++* OUTPUT:
++*       None.
++*
++* RETURN:
++*       True for success, false otherwise.
++*
++*******************************************************************************/
++
++static int galsdma_set_mem_space (unsigned int memSpace,
++				  unsigned int memSpaceTarget,
++				  unsigned int memSpaceAttr,
++				  unsigned int baseAddress, unsigned int size)
++{
++	unsigned int temp;
++
++	if (size == 0) {
++		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
++				   1 << memSpace);
++		return true;
++	}
++
++	/* The base address must be aligned to the size.  */
++	if (baseAddress % size != 0) {
++		return false;
++	}
++	if (size < 0x10000) {
++		return false;
++	}
++
++	/* Align size and base to 64K */
++	baseAddress &= 0xffff0000;
++	size &= 0xffff0000;
++	temp = size >> 16;
++
++	/* Checking that the size is a sequence of '1' followed by a
++	   sequence of '0' starting from LSB to MSB. */
++	while ((temp > 0) && (temp & 0x1)) {
++		temp = temp >> 1;
++	}
++
++	if (temp != 0) {
++		GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
++			      (baseAddress | memSpaceTarget | memSpaceAttr));
++		GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8),
++			      (size - 1) & 0xffff0000);
++		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
++				   1 << memSpace);
++	} else {
++		/* An invalid size was specified */
++		return false;
++	}
++	return true;
++}
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mpsc.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.h
+--- u-boot-1.1.6/board/prodrive/p3mx/mpsc.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,156 @@
++/*
++ * (C) Copyright 2001
++ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*************************************************************************
++ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
++ *
++  ************************************************************************/
++
++
++/*
++ * mpsc.h - header file for MPSC in uart mode (console driver)
++ */
++
++#ifndef __MPSC_H__
++#define __MPSC_H__
++
++/* include actual Galileo defines */
++#include "../../Marvell/include/mv_gen_reg.h"
++
++/* driver related defines */
++
++int mpsc_init(int baud);
++void mpsc_sdma_init(void);
++void mpsc_init2(void);
++int galbrg_set_baudrate(int channel, int rate);
++
++int mpsc_putchar_early(char ch);
++char mpsc_getchar_debug(void);
++int mpsc_test_char_debug(void);
++
++int mpsc_test_char_sdma(void);
++
++extern int (*mpsc_putchar)(char ch);
++extern char (*mpsc_getchar)(void);
++extern int (*mpsc_test_char)(void);
++
++#define CHANNEL CONFIG_MPSC_PORT
++
++#define TX_DESC     5
++#define RX_DESC     20
++
++#define DESC_FIRST  0x00010000
++#define DESC_LAST   0x00020000
++#define DESC_OWNER_BIT  0x80000000
++
++#define TX_DEMAND   0x00800000
++#define TX_STOP     0x00010000
++#define RX_ENABLE   0x00000080
++
++#define SDMA_RX_ABORT 		  (1 << 15)
++#define SDMA_TX_ABORT 		  (1 << 31)
++#define MPSC_TX_ABORT 		  (1 << 7)
++#define MPSC_RX_ABORT             (1 << 23)
++#define MPSC_ENTER_HUNT           (1 << 31)
++
++/* MPSC defines */
++
++#define GALMPSC_CONNECT            0x1
++#define GALMPSC_DISCONNECT         0x0
++
++#define GALMPSC_UART               0x1
++
++#define GALMPSC_STOP_BITS_1        0x0
++#define GALMPSC_STOP_BITS_2        0x1
++#define GALMPSC_CHAR_LENGTH_8      0x3
++#define GALMPSC_CHAR_LENGTH_7      0x2
++
++#define GALMPSC_PARITY_ODD         0x0
++#define GALMPSC_PARITY_EVEN        0x2
++#define GALMPSC_PARITY_MARK        0x3
++#define GALMPSC_PARITY_SPACE       0x1
++#define GALMPSC_PARITY_NONE        -1
++
++#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
++#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
++#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
++#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
++#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
++#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
++#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
++
++#define GALMPSC_REG_GAP            0x1000
++
++#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
++#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
++#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
++#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
++#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
++#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
++#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
++#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
++#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
++#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
++#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
++#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
++
++#define GALSDMA_COMMAND_FIRST     (1 << 16)
++#define GALSDMA_COMMAND_LAST      (1 << 17)
++#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
++#define GALSDMA_COMMAND_AUTO      (1 << 30)
++#define GALSDMA_COMMAND_OWNER     (1 << 31)
++
++#define GALSDMA_RX                 0
++#define GALSDMA_TX                 1
++
++/* CHANNEL2 should be CHANNEL1, according to documentation,
++ * but to work with the current GTREGS file...
++ */
++#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
++#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
++#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
++#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
++#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
++#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
++#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
++#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
++#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
++#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
++#define GALSDMA_REG_DIFF           0x2000
++
++/* WRONG in gt64260R.h */
++#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
++#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
++#define GALMPSC_0_INT_CAUSE        0xb804
++#define GALMPSC_0_INT_MASK         0xb884
++
++#define GALSDMA_MODE_UART          0
++#define GALSDMA_MODE_BISYNC        1
++#define GALSDMA_MODE_HDLC          2
++#define GALSDMA_MODE_TRANSPARENT   3
++
++#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
++#define GALBRG_REG_GAP             0x0008
++#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
++
++#endif /* __MPSC_H__ */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mv_eth.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.c
+--- u-boot-1.1.6/board/prodrive/p3mx/mv_eth.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,3344 @@
++/*
++ * (C) Copyright 2003
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * based on - Driver for MV64460X ethernet ports
++ * Copyright (C) 2002 rabeeh@galileo.co.il
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ 3 the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * mv_eth.c - header file for the polled mode GT ethernet driver
++ */
++#include <common.h>
++#include <net.h>
++#include <malloc.h>
++#include <miiphy.h>
++
++#include "mv_eth.h"
++
++/* enable Debug outputs */
++
++#undef DEBUG_MV_ETH
++
++#ifdef DEBUG_MV_ETH
++#define DEBUG
++#define DP(x) x
++#else
++#define DP(x)
++#endif
++
++/* PHY DFCDL Registers */
++#define ETH_PHY_DFCDL_CONFIG0_REG	0x2100
++#define ETH_PHY_DFCDL_CONFIG1_REG	0x2104
++#define ETH_PHY_DFCDL_ADDR_REG		0x2110
++#define ETH_PHY_DFCDL_DATA0_REG		0x2114
++
++#define PHY_AUTONEGOTIATE_TIMEOUT	4000	/* 4000 ms autonegotiate timeout */
++#define PHY_UPDATE_TIMEOUT		10000
++
++#undef MV64460_CHECKSUM_OFFLOAD
++/*************************************************************************
++*  The first part is the high level driver of the gigE ethernet ports.	 *
++*************************************************************************/
++
++/* Definition for configuring driver */
++/* #define UPDATE_STATS_BY_SOFTWARE */
++#undef MV64460_RX_QUEUE_FILL_ON_TASK
++
++/* Constants */
++#define MAGIC_ETH_RUNNING		8031971
++#define MV64460_INTERNAL_SRAM_SIZE	_256K
++#define EXTRA_BYTES 32
++#define WRAP	   ETH_HLEN + 2 + 4 + 16
++#define BUFFER_MTU dev->mtu + WRAP
++#define INT_CAUSE_UNMASK_ALL		0x0007ffff
++#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
++#ifdef MV64460_RX_FILL_ON_TASK
++#define INT_CAUSE_MASK_ALL		0x00000000
++#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
++#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
++#endif
++
++/* Read/Write to/from MV64460 internal registers */
++#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
++#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
++#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
++#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
++
++#define my_cpu_to_le32(x) my_le32_to_cpu((x))
++
++/* Static function declarations */
++static int mv64460_eth_real_open (struct eth_device *eth);
++static int mv64460_eth_real_stop (struct eth_device *eth);
++static struct net_device_stats *mv64460_eth_get_stats (struct eth_device
++						       *dev);
++static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
++static void mv64460_eth_update_stat (struct eth_device *dev);
++bool db64460_eth_start (struct eth_device *eth);
++unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
++				   unsigned int mib_offset);
++int mv64460_eth_receive (struct eth_device *dev);
++
++int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length);
++
++int mv_miiphy_read(char *devname, unsigned char phy_addr,
++		   unsigned char phy_reg, unsigned short *value);
++int mv_miiphy_write(char *devname, unsigned char phy_addr,
++		    unsigned char phy_reg, unsigned short value);
++
++int phy_setup_aneg (char *devname, unsigned char addr);
++
++#ifndef	 UPDATE_STATS_BY_SOFTWARE
++static void mv64460_eth_print_stat (struct eth_device *dev);
++#endif
++/* Processes a received packet */
++extern void NetReceive (volatile uchar *, int);
++
++extern unsigned int INTERNAL_REG_BASE_ADDR;
++
++unsigned long my_le32_to_cpu (unsigned long x)
++{
++	return (((x & 0x000000ffU) << 24) |
++		((x & 0x0000ff00U) << 8) |
++		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
++}
++
++/*************************************************
++ *Helper functions - used inside the driver only *
++ *************************************************/
++#ifdef DEBUG_MV_ETH
++void print_globals (struct eth_device *dev)
++{
++	printf ("Ethernet PRINT_Globals-Debug function\n");
++	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
++		(unsigned int) dev->priv);
++	printf ("Base Address for mv64460_eth_priv:	%08x\n",
++		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
++				 port_private));
++
++	printf ("GT Internal Base Address:	%08x\n",
++		INTERNAL_REG_BASE_ADDR);
++	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n",
++		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE);
++	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n",
++		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE);
++	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
++		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
++		p_rx_buffer_base[0],
++		(MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32);
++	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
++		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
++		p_tx_buffer_base[0],
++		(MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32);
++}
++#endif
++
++/**********************************************************************
++ * mv64460_eth_print_phy_status
++ *
++ * Prints gigabit ethenret phy status
++ *
++ * Input : pointer to ethernet interface network device structure
++ * Output : N/A
++ **********************************************************************/
++void mv64460_eth_print_phy_status (struct eth_device *dev)
++{
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	unsigned int port_status, phy_reg_data;
++
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	/* Check Link status on phy */
++	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
++	if (!(phy_reg_data & 0x20)) {
++		printf ("Ethernet port changed link status to DOWN\n");
++	} else {
++		port_status =
++			MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
++		printf ("Ethernet status port %d: Link up", port_num);
++		printf (", %s",
++			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
++		if (port_status & BIT4)
++			printf (", Speed 1 Gbps");
++		else
++			printf (", %s",
++				(port_status & BIT5) ? "Speed 100 Mbps" :
++				"Speed 10 Mbps");
++		printf ("\n");
++	}
++}
++
++/**********************************************************************
++ * u-boot entry functions for mv64460_eth
++ *
++ **********************************************************************/
++int db64460_eth_probe (struct eth_device *dev)
++{
++	return ((int) db64460_eth_start (dev));
++}
++
++int db64460_eth_poll (struct eth_device *dev)
++{
++	return mv64460_eth_receive (dev);
++}
++
++int db64460_eth_transmit (struct eth_device *dev, volatile void *packet,
++			  int length)
++{
++	mv64460_eth_xmit (dev, packet, length);
++	return 0;
++}
++
++void db64460_eth_disable (struct eth_device *dev)
++{
++	mv64460_eth_stop (dev);
++}
++
++#define DFCDL(write,read)   ((write << 6) | read)
++unsigned int  ethDfcdls[] = {
++	DFCDL(0,0),	DFCDL(1,1),	DFCDL(2,2),	DFCDL(3,3),
++	DFCDL(4,4),	DFCDL(5,5),	DFCDL(6,6),	DFCDL(7,7),
++	DFCDL(8,8),	DFCDL(9,9),	DFCDL(10,10),	DFCDL(11,11),
++	DFCDL(12,12),	DFCDL(13,13),	DFCDL(14,14),	DFCDL(15,15),
++	DFCDL(16,16),	DFCDL(17,17),	DFCDL(18,18),	DFCDL(19,19),
++	DFCDL(20,20),	DFCDL(21,21),	DFCDL(22,22),	DFCDL(23,23),
++	DFCDL(24,24),	DFCDL(25,25),	DFCDL(26,26),	DFCDL(27,27),
++	DFCDL(28,28),	DFCDL(29,29),	DFCDL(30,30),	DFCDL(31,31),
++	DFCDL(32,32),	DFCDL(33,33),	DFCDL(34,34),	DFCDL(35,35),
++	DFCDL(36,36),	DFCDL(37,37),	DFCDL(38,38),	DFCDL(39,39),
++	DFCDL(40,40),	DFCDL(41,41),	DFCDL(42,42),	DFCDL(43,43),
++	DFCDL(44,44),	DFCDL(45,45),	DFCDL(46,46),	DFCDL(47,47),
++	DFCDL(48,48),	DFCDL(49,49),	DFCDL(50,50),	DFCDL(51,51),
++	DFCDL(52,52),	DFCDL(53,53),	DFCDL(54,54),	DFCDL(55,55),
++	DFCDL(56,56),	DFCDL(57,57),	DFCDL(58,58),	DFCDL(59,59),
++	DFCDL(60,60),	DFCDL(61,61),	DFCDL(62,62),	DFCDL(63,63),
++};
++
++void mv_eth_phy_init (void)
++{
++	int i;
++
++	MV_REG_WRITE (ETH_PHY_DFCDL_ADDR_REG, 0);
++
++	for (i = 0; i < 64; i++) {
++		MV_REG_WRITE (ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]);
++	}
++
++	MV_REG_WRITE (ETH_PHY_DFCDL_CONFIG0_REG, 0x300000);
++}
++
++void mv6446x_eth_initialize (bd_t * bis)
++{
++	struct eth_device *dev;
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	int devnum, x, temp;
++	char *s, *e, buf[64];
++
++	/* P3M750 only
++	 * Set RGMII clock drives strength
++	 */
++	temp = MV_REG_READ(0x20A0);
++	temp |= 0x04000080;
++	MV_REG_WRITE(0x20A0, temp);
++
++	mv_eth_phy_init();
++
++	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
++		dev = calloc (sizeof (*dev), 1);
++		if (!dev) {
++			printf ("%s: mv_enet%d allocation failure, %s\n",
++				__FUNCTION__, devnum, "eth_device structure");
++			return;
++		}
++
++		/* must be less than NAMESIZE (16) */
++		sprintf (dev->name, "mv_enet%d", devnum);
++
++#ifdef DEBUG
++		printf ("Initializing %s\n", dev->name);
++#endif
++
++		/* Extract the MAC address from the environment */
++		switch (devnum) {
++		case 0:
++			s = "ethaddr";
++			break;
++		case 1:
++			s = "eth1addr";
++			break;
++		case 2:
++			s = "eth2addr";
++			break;
++		default:	/* this should never happen */
++			printf ("%s: Invalid device number %d\n",
++				__FUNCTION__, devnum);
++			return;
++		}
++
++		temp = getenv_r (s, buf, sizeof (buf));
++		s = (temp > 0) ? buf : NULL;
++
++#ifdef DEBUG
++		printf ("Setting MAC %d to %s\n", devnum, s);
++#endif
++		for (x = 0; x < 6; ++x) {
++			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
++			if (s)
++				s = (*e) ? e + 1 : e;
++		}
++		/* ronen - set the MAC addr in the HW */
++		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
++
++		dev->init = (void *) db64460_eth_probe;
++		dev->halt = (void *) ethernet_phy_reset;
++		dev->send = (void *) db64460_eth_transmit;
++		dev->recv = (void *) db64460_eth_poll;
++
++		ethernet_private = calloc (sizeof (*ethernet_private), 1);
++		dev->priv = (void *)ethernet_private;
++		if (!ethernet_private) {
++			printf ("%s: %s allocation failure, %s\n",
++				__FUNCTION__, dev->name,
++				"Private Device Structure");
++			free (dev);
++			return;
++		}
++		/* start with an zeroed ETH_PORT_INFO */
++		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
++		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
++
++		/* set pointer to memory for stats data structure etc... */
++		port_private = calloc (sizeof (*ethernet_private), 1);
++		ethernet_private->port_private = (void *)port_private;
++		if (!port_private) {
++			printf ("%s: %s allocation failure, %s\n",
++				__FUNCTION__, dev->name,
++				"Port Private Device Structure");
++
++			free (ethernet_private);
++			free (dev);
++			return;
++		}
++
++		port_private->stats =
++			calloc (sizeof (struct net_device_stats), 1);
++		if (!port_private->stats) {
++			printf ("%s: %s allocation failure, %s\n",
++				__FUNCTION__, dev->name,
++				"Net stat Structure");
++
++			free (port_private);
++			free (ethernet_private);
++			free (dev);
++			return;
++		}
++		memset (ethernet_private->port_private, 0,
++			sizeof (struct mv64460_eth_priv));
++		switch (devnum) {
++		case 0:
++			ethernet_private->port_num = ETH_0;
++			break;
++		case 1:
++			ethernet_private->port_num = ETH_1;
++			break;
++		case 2:
++			ethernet_private->port_num = ETH_2;
++			break;
++		default:
++			printf ("Invalid device number %d\n", devnum);
++			break;
++		};
++
++		port_private->port_num = devnum;
++		/*
++		 * Read MIB counter on the GT in order to reset them,
++		 * then zero all the stats fields in memory
++		 */
++		mv64460_eth_update_stat (dev);
++		memset (port_private->stats, 0,
++			sizeof (struct net_device_stats));
++		/* Extract the MAC address from the environment */
++		switch (devnum) {
++		case 0:
++			s = "ethaddr";
++			break;
++		case 1:
++			s = "eth1addr";
++			break;
++		case 2:
++			s = "eth2addr";
++			break;
++		default:	/* this should never happen */
++			printf ("%s: Invalid device number %d\n",
++				__FUNCTION__, devnum);
++			return;
++		}
++
++		temp = getenv_r (s, buf, sizeof (buf));
++		s = (temp > 0) ? buf : NULL;
++
++#ifdef DEBUG
++		printf ("Setting MAC %d to %s\n", devnum, s);
++#endif
++		for (x = 0; x < 6; ++x) {
++			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
++			if (s)
++				s = (*e) ? e + 1 : e;
++		}
++
++		DP (printf ("Allocating descriptor and buffer rings\n"));
++
++		ethernet_private->p_rx_desc_area_base[0] =
++			(ETH_RX_DESC *) memalign (16,
++						  RX_DESC_ALIGNED_SIZE *
++						  MV64460_RX_QUEUE_SIZE + 1);
++		ethernet_private->p_tx_desc_area_base[0] =
++			(ETH_TX_DESC *) memalign (16,
++						  TX_DESC_ALIGNED_SIZE *
++						  MV64460_TX_QUEUE_SIZE + 1);
++
++		ethernet_private->p_rx_buffer_base[0] =
++			(char *) memalign (16,
++					   MV64460_RX_QUEUE_SIZE *
++					   MV64460_TX_BUFFER_SIZE + 1);
++		ethernet_private->p_tx_buffer_base[0] =
++			(char *) memalign (16,
++					   MV64460_RX_QUEUE_SIZE *
++					   MV64460_TX_BUFFER_SIZE + 1);
++
++#ifdef DEBUG_MV_ETH
++		/* DEBUG OUTPUT prints adresses of globals */
++		print_globals (dev);
++#endif
++		eth_register (dev);
++
++		miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write);
++	}
++	DP (printf ("%s: exit\n", __FUNCTION__));
++
++}
++
++/**********************************************************************
++ * mv64460_eth_open
++ *
++ * This function is called when openning the network device. The function
++ * should initialize all the hardware, initialize cyclic Rx/Tx
++ * descriptors chain and buffers and allocate an IRQ to the network
++ * device.
++ *
++ * Input : a pointer to the network device structure
++ * / / ronen - changed the output to match  net/eth.c needs
++ * Output : nonzero of success , zero if fails.
++ * under construction
++ **********************************************************************/
++
++int mv64460_eth_open (struct eth_device *dev)
++{
++	return (mv64460_eth_real_open (dev));
++}
++
++/* Helper function for mv64460_eth_open */
++static int mv64460_eth_real_open (struct eth_device *dev)
++{
++
++	unsigned int queue;
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++	u32 port_status;
++	ushort reg_short;
++	int speed;
++	int duplex;
++	int i;
++	int reg;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	/* ronen - when we update the MAC env params we only update dev->enetaddr
++	   see ./net/eth.c eth_set_enetaddr() */
++	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
++
++	port_private = (struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	/* Stop RX Queues */
++	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00);
++
++	/* Clear the ethernet port interrupts */
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
++
++	/* Unmask RX buffer and TX end interrupt */
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num),
++		      INT_CAUSE_UNMASK_ALL);
++
++	/* Unmask phy and link status changes interrupts */
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
++		      INT_CAUSE_UNMASK_ALL_EXT);
++
++	/* Set phy address of the port */
++	ethernet_private->port_phy_addr = 0x1 + (port_num << 1);
++	reg = ethernet_private->port_phy_addr;
++
++	/* Activate the DMA channels etc */
++	eth_port_init (ethernet_private);
++
++	/* "Allocate" setup TX rings */
++
++	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
++		unsigned int size;
++
++		port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE;
++		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
++		ethernet_private->tx_desc_area_size[queue] = size;
++
++		/* first clear desc area completely */
++		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
++			0, ethernet_private->tx_desc_area_size[queue]);
++
++		/* initialize tx desc ring with low level driver */
++		if (ether_init_tx_desc_ring
++		    (ethernet_private, ETH_Q0,
++		     port_private->tx_ring_size[queue],
++		     MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
++		     (unsigned int) ethernet_private->
++		     p_tx_desc_area_base[queue],
++		     (unsigned int) ethernet_private->
++		     p_tx_buffer_base[queue]) == false)
++			printf ("### Error initializing TX Ring\n");
++	}
++
++	/* "Allocate" setup RX rings */
++	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
++		unsigned int size;
++
++		/* Meantime RX Ring are fixed - but must be configurable by user */
++		port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE;
++		size = (port_private->rx_ring_size[queue] *
++			RX_DESC_ALIGNED_SIZE);
++		ethernet_private->rx_desc_area_size[queue] = size;
++
++		/* first clear desc area completely */
++		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
++			0, ethernet_private->rx_desc_area_size[queue]);
++		if ((ether_init_rx_desc_ring
++		     (ethernet_private, ETH_Q0,
++		      port_private->rx_ring_size[queue],
++		      MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
++		      (unsigned int) ethernet_private->
++		      p_rx_desc_area_base[queue],
++		      (unsigned int) ethernet_private->
++		      p_rx_buffer_base[queue])) == false)
++			printf ("### Error initializing RX Ring\n");
++	}
++
++	eth_port_start (ethernet_private);
++
++	/* Set maximum receive buffer to 9700 bytes */
++	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num),
++		      (0x5 << 17) |
++		      (MV_REG_READ
++		       (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num))
++		       & 0xfff1ffff));
++
++	/*
++	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
++	 * disable the leaky bucket mechanism .
++	 */
++
++	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
++	port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
++
++#if defined(CONFIG_PHY_RESET)
++	/*
++	 * Reset the phy, only if its the first time through
++	 * otherwise, just check the speeds & feeds
++	 */
++	if (port_private->first_init == 0) {
++		port_private->first_init = 1;
++		ethernet_phy_reset (port_num);
++
++		/* Start/Restart autonegotiation */
++		phy_setup_aneg (dev->name, reg);
++		udelay (1000);
++	}
++#endif /* defined(CONFIG_PHY_RESET) */
++
++	miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
++
++	/*
++	 * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
++	 */
++	if ((reg_short & PHY_BMSR_AUTN_ABLE)
++	    && !(reg_short & PHY_BMSR_AUTN_COMP)) {
++		puts ("Waiting for PHY auto negotiation to complete");
++		i = 0;
++		while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
++			/*
++			 * Timeout reached ?
++			 */
++			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
++				puts (" TIMEOUT !\n");
++				break;
++			}
++
++			if ((i++ % 1000) == 0) {
++				putc ('.');
++			}
++			udelay (1000);	/* 1 ms */
++			miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
++
++		}
++		puts (" done\n");
++		udelay (500000);	/* another 500 ms (results in faster booting) */
++	}
++
++	speed = miiphy_speed (dev->name, reg);
++	duplex = miiphy_duplex (dev->name, reg);
++
++	printf ("ENET Speed is %d Mbps - %s duplex connection\n",
++		(int) speed, (duplex == HALF) ? "HALF" : "FULL");
++
++	port_private->eth_running = MAGIC_ETH_RUNNING;
++	return 1;
++}
++
++static int mv64460_eth_free_tx_rings (struct eth_device *dev)
++{
++	unsigned int queue;
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++	volatile ETH_TX_DESC *p_tx_curr_desc;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	/* Stop Tx Queues */
++	MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
++		      0x0000ff00);
++
++	/* Free TX rings */
++	DP (printf ("Clearing previously allocated TX queues... "));
++	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
++		/* Free on TX rings */
++		for (p_tx_curr_desc =
++		     ethernet_private->p_tx_desc_area_base[queue];
++		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
++		      ethernet_private->p_tx_desc_area_base[queue] +
++		      ethernet_private->tx_desc_area_size[queue]);
++		     p_tx_curr_desc =
++		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
++				      TX_DESC_ALIGNED_SIZE)) {
++			/* this is inside for loop */
++			if (p_tx_curr_desc->return_info != 0) {
++				p_tx_curr_desc->return_info = 0;
++				DP (printf ("freed\n"));
++			}
++		}
++		DP (printf ("Done\n"));
++	}
++	return 0;
++}
++
++static int mv64460_eth_free_rx_rings (struct eth_device *dev)
++{
++	unsigned int queue;
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++	volatile ETH_RX_DESC *p_rx_curr_desc;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	/* Stop RX Queues */
++	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
++		      0x0000ff00);
++
++	/* Free RX rings */
++	DP (printf ("Clearing previously allocated RX queues... "));
++	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
++		/* Free preallocated skb's on RX rings */
++		for (p_rx_curr_desc =
++		     ethernet_private->p_rx_desc_area_base[queue];
++		     (((unsigned int) p_rx_curr_desc <
++		       ((unsigned int) ethernet_private->
++			p_rx_desc_area_base[queue] +
++			ethernet_private->rx_desc_area_size[queue])));
++		     p_rx_curr_desc =
++		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
++				      RX_DESC_ALIGNED_SIZE)) {
++			if (p_rx_curr_desc->return_info != 0) {
++				p_rx_curr_desc->return_info = 0;
++				DP (printf ("freed\n"));
++			}
++		}
++		DP (printf ("Done\n"));
++	}
++	return 0;
++}
++
++/**********************************************************************
++ * mv64460_eth_stop
++ *
++ * This function is used when closing the network device.
++ * It updates the hardware,
++ * release all memory that holds buffers and descriptors and release the IRQ.
++ * Input : a pointer to the device structure
++ * Output : zero if success , nonzero if fails
++ *********************************************************************/
++
++int mv64460_eth_stop (struct eth_device *dev)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	/* Disable all gigE address decoder */
++	MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
++	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
++	mv64460_eth_real_stop (dev);
++
++	return 0;
++};
++
++/* Helper function for mv64460_eth_stop */
++
++static int mv64460_eth_real_stop (struct eth_device *dev)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	mv64460_eth_free_tx_rings (dev);
++	mv64460_eth_free_rx_rings (dev);
++
++	eth_port_reset (ethernet_private->port_num);
++	/* Disable ethernet port interrupts */
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
++	/* Mask RX buffer and TX end interrupt */
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0);
++	/* Mask phy and link status changes interrupts */
++	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
++	MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH,
++			   BIT0 << port_num);
++	/* Print Network statistics */
++#ifndef	 UPDATE_STATS_BY_SOFTWARE
++	/*
++	 * Print statistics (only if ethernet is running),
++	 * then zero all the stats fields in memory
++	 */
++	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
++		port_private->eth_running = 0;
++		mv64460_eth_print_stat (dev);
++	}
++	memset (port_private->stats, 0, sizeof (struct net_device_stats));
++#endif
++	DP (printf ("\nEthernet stopped ... \n"));
++	return 0;
++}
++
++/**********************************************************************
++ * mv64460_eth_start_xmit
++ *
++ * This function is queues a packet in the Tx descriptor for
++ * required port.
++ *
++ * Input : skb - a pointer to socket buffer
++ *	   dev - a pointer to the required port
++ *
++ * Output : zero upon success
++ **********************************************************************/
++
++int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
++		      int dataSize)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++	PKT_INFO pkt_info;
++	ETH_FUNC_RET_STATUS status;
++	struct net_device_stats *stats;
++	ETH_FUNC_RET_STATUS release_result;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	stats = port_private->stats;
++
++	/* Update packet info data structure */
++	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
++	pkt_info.byte_cnt = dataSize;
++	pkt_info.buf_ptr = (unsigned int) dataPtr;
++	pkt_info.return_info = 0;
++
++	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
++	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
++		printf ("Error on transmitting packet ..");
++		if (status == ETH_QUEUE_FULL)
++			printf ("ETH Queue is full. \n");
++		if (status == ETH_QUEUE_LAST_RESOURCE)
++			printf ("ETH Queue: using last available resource. \n");
++		return 1;
++	}
++
++	/* Update statistics and start of transmittion time */
++	stats->tx_bytes += dataSize;
++	stats->tx_packets++;
++
++	/* Check if packet(s) is(are) transmitted correctly (release everything) */
++	do {
++		release_result =
++			eth_tx_return_desc (ethernet_private, ETH_Q0,
++					    &pkt_info);
++		switch (release_result) {
++		case ETH_OK:
++			DP (printf ("descriptor released\n"));
++			if (pkt_info.cmd_sts & BIT0) {
++				printf ("Error in TX\n");
++				stats->tx_errors++;
++			}
++			break;
++		case ETH_RETRY:
++			DP (printf ("transmission still in process\n"));
++			break;
++
++		case ETH_ERROR:
++			printf ("routine can not access Tx desc ring\n");
++			break;
++
++		case ETH_END_OF_JOB:
++			DP (printf ("the routine has nothing to release\n"));
++			break;
++		default:	/* should not happen */
++			break;
++		}
++	} while (release_result == ETH_OK);
++
++	return 0;	/* success */
++}
++
++/**********************************************************************
++ * mv64460_eth_receive
++ *
++ * This function is forward packets that are received from the port's
++ * queues toward kernel core or FastRoute them to another interface.
++ *
++ * Input : dev - a pointer to the required interface
++ *	   max - maximum number to receive (0 means unlimted)
++ *
++ * Output : number of served packets
++ **********************************************************************/
++
++int mv64460_eth_receive (struct eth_device *dev)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++	PKT_INFO pkt_info;
++	struct net_device_stats *stats;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private = (struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++	stats = port_private->stats;
++
++	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) {
++#ifdef DEBUG_MV_ETH
++		if (pkt_info.byte_cnt != 0) {
++			printf ("%s: Received %d byte Packet @ 0x%x\n",
++				__FUNCTION__, pkt_info.byte_cnt,
++				pkt_info.buf_ptr);
++			if(pkt_info.buf_ptr != 0){
++				for(i=0; i < pkt_info.byte_cnt; i++){
++					if((i % 4) == 0){
++						printf("\n0x");
++					}
++					printf("%02x", ((char*)pkt_info.buf_ptr)[i]);
++				}
++				printf("\n");
++			}
++		}
++#endif
++		/* Update statistics. Note byte count includes 4 byte CRC count */
++		stats->rx_packets++;
++		stats->rx_bytes += pkt_info.byte_cnt;
++
++		/*
++		 * In case received a packet without first / last bits on OR the error
++		 * summary bit is on, the packets needs to be dropeed.
++		 */
++		if (((pkt_info.
++		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
++		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
++		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
++			stats->rx_dropped++;
++
++			printf ("Received packet spread on multiple descriptors\n");
++
++			/* Is this caused by an error ? */
++			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
++				stats->rx_errors++;
++			}
++
++			/* free these descriptors again without forwarding them to the higher layers */
++			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
++			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
++
++			if (eth_rx_return_buff
++			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
++				printf ("Error while returning the RX Desc to Ring\n");
++			} else {
++				DP (printf ("RX Desc returned to Ring\n"));
++			}
++			/* /free these descriptors again */
++		} else {
++
++/* !!! call higher layer processing */
++#ifdef DEBUG_MV_ETH
++			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
++#endif
++			/* let the upper layer handle the packet */
++			NetReceive ((uchar *) pkt_info.buf_ptr,
++				    (int) pkt_info.byte_cnt);
++
++/* **************************************************************** */
++/* free descriptor  */
++			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
++			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
++			DP (printf ("RX: pkt_info.buf_ptr =	%x\n", pkt_info.buf_ptr));
++			if (eth_rx_return_buff
++			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
++				printf ("Error while returning the RX Desc to Ring\n");
++			} else {
++				DP (printf ("RX: Desc returned to Ring\n"));
++			}
++
++/* **************************************************************** */
++
++		}
++	}
++	mv64460_eth_get_stats (dev);	/* update statistics */
++	return 1;
++}
++
++/**********************************************************************
++ * mv64460_eth_get_stats
++ *
++ * Returns a pointer to the interface statistics.
++ *
++ * Input : dev - a pointer to the required interface
++ *
++ * Output : a pointer to the interface's statistics
++ **********************************************************************/
++
++static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	unsigned int port_num;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++
++	mv64460_eth_update_stat (dev);
++
++	return port_private->stats;
++}
++
++/**********************************************************************
++ * mv64460_eth_update_stat
++ *
++ * Update the statistics structure in the private data structure
++ *
++ * Input : pointer to ethernet interface network device structure
++ * Output : N/A
++ **********************************************************************/
++
++static void mv64460_eth_update_stat (struct eth_device *dev)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	struct net_device_stats *stats;
++	unsigned int port_num;
++	volatile unsigned int dummy;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++	stats = port_private->stats;
++
++	/* These are false updates */
++	stats->rx_packets += (unsigned long)
++		eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_GOOD_FRAMES_RECEIVED);
++	stats->tx_packets += (unsigned long)
++		eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_GOOD_FRAMES_SENT);
++	stats->rx_bytes += (unsigned long)
++		eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
++	/*
++	 * Ideally this should be as follows -
++	 *
++	 *   stats->rx_bytes   += stats->rx_bytes +
++	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
++	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
++	 *
++	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
++	 * is just a dummy read for proper work of the GigE port
++	 */
++	dummy = eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
++	stats->tx_bytes += (unsigned long)
++		eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
++	dummy = eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
++	stats->rx_errors += (unsigned long)
++		eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_MAC_RECEIVE_ERROR);
++
++	/* Rx dropped is for received packet with CRC error */
++	stats->rx_dropped +=
++		(unsigned long) eth_read_mib_counter (ethernet_private->
++						      port_num,
++						      ETH_MIB_BAD_CRC_EVENT);
++	stats->multicast += (unsigned long)
++		eth_read_mib_counter (ethernet_private->port_num,
++				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
++	stats->collisions +=
++		(unsigned long) eth_read_mib_counter (ethernet_private->
++						      port_num,
++						      ETH_MIB_COLLISION) +
++		(unsigned long) eth_read_mib_counter (ethernet_private->
++						      port_num,
++						      ETH_MIB_LATE_COLLISION);
++	/* detailed rx errors */
++	stats->rx_length_errors +=
++		(unsigned long) eth_read_mib_counter (ethernet_private->
++						      port_num,
++						      ETH_MIB_UNDERSIZE_RECEIVED)
++		+
++		(unsigned long) eth_read_mib_counter (ethernet_private->
++						      port_num,
++						      ETH_MIB_OVERSIZE_RECEIVED);
++	/* detailed tx errors */
++}
++
++#ifndef	 UPDATE_STATS_BY_SOFTWARE
++/**********************************************************************
++ * mv64460_eth_print_stat
++ *
++ * Update the statistics structure in the private data structure
++ *
++ * Input : pointer to ethernet interface network device structure
++ * Output : N/A
++ **********************************************************************/
++
++static void mv64460_eth_print_stat (struct eth_device *dev)
++{
++	ETH_PORT_INFO *ethernet_private;
++	struct mv64460_eth_priv *port_private;
++	struct net_device_stats *stats;
++	unsigned int port_num;
++
++	ethernet_private = (ETH_PORT_INFO *) dev->priv;
++	port_private =
++		(struct mv64460_eth_priv *) ethernet_private->port_private;
++	port_num = port_private->port_num;
++	stats = port_private->stats;
++
++	/* These are false updates */
++	printf ("\n### Network statistics: ###\n");
++	printf ("--------------------------\n");
++	printf (" Packets received:		%ld\n", stats->rx_packets);
++	printf (" Packets send:			%ld\n", stats->tx_packets);
++	printf (" Received bytes:		%ld\n", stats->rx_bytes);
++	printf (" Send bytes:			%ld\n", stats->tx_bytes);
++	if (stats->rx_errors != 0)
++		printf (" Rx Errors:			%ld\n",
++			stats->rx_errors);
++	if (stats->rx_dropped != 0)
++		printf (" Rx dropped (CRC Errors):	%ld\n",
++			stats->rx_dropped);
++	if (stats->multicast != 0)
++		printf (" Rx mulicast frames:		%ld\n",
++			stats->multicast);
++	if (stats->collisions != 0)
++		printf (" No. of collisions:		%ld\n",
++			stats->collisions);
++	if (stats->rx_length_errors != 0)
++		printf (" Rx length errors:		%ld\n",
++			stats->rx_length_errors);
++}
++#endif
++
++/**************************************************************************
++ *network_start - Network Kick Off Routine UBoot
++ *Inputs :
++ *Outputs :
++ **************************************************************************/
++
++bool db64460_eth_start (struct eth_device *dev)
++{
++	return (mv64460_eth_open (dev));	/* calls real open */
++}
++
++/*************************************************************************
++**************************************************************************
++**************************************************************************
++*  The second part is the low level driver of the gigE ethernet ports.	 *
++**************************************************************************
++**************************************************************************
++*************************************************************************/
++/*
++ * based on Linux code
++ * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
++ * Copyright (C) 2002 rabeeh@galileo.co.il
++
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ *
++ */
++
++/********************************************************************************
++ * Marvell's Gigabit Ethernet controller low level driver
++ *
++ * DESCRIPTION:
++ *	 This file introduce low level API to Marvell's Gigabit Ethernet
++ *		controller. This Gigabit Ethernet Controller driver API controls
++ *		1) Operations (i.e. port init, start, reset etc').
++ *		2) Data flow (i.e. port send, receive etc').
++ *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
++ *		struct.
++ *		This struct includes user configuration information as well as
++ *		driver internal data needed for its operations.
++ *
++ *		Supported Features:
++ *		- This low level driver is OS independent. Allocating memory for
++ *		  the descriptor rings and buffers are not within the scope of
++ *		  this driver.
++ *		- The user is free from Rx/Tx queue managing.
++ *		- This low level driver introduce functionality API that enable
++ *		  the to operate Marvell's Gigabit Ethernet Controller in a
++ *		  convenient way.
++ *		- Simple Gigabit Ethernet port operation API.
++ *		- Simple Gigabit Ethernet port data flow API.
++ *		- Data flow and operation API support per queue functionality.
++ *		- Support cached descriptors for better performance.
++ *		- Enable access to all four DRAM banks and internal SRAM memory
++ *		  spaces.
++ *		- PHY access and control API.
++ *		- Port control register configuration API.
++ *		- Full control over Unicast and Multicast MAC configurations.
++ *
++ *		Operation flow:
++ *
++ *		Initialization phase
++ *		This phase complete the initialization of the ETH_PORT_INFO
++ *		struct.
++ *		User information regarding port configuration has to be set
++ *		prior to calling the port initialization routine. For example,
++ *		the user has to assign the port_phy_addr field which is board
++ *		depended parameter.
++ *		In this phase any port Tx/Rx activity is halted, MIB counters
++ *		are cleared, PHY address is set according to user parameter and
++ *		access to DRAM and internal SRAM memory spaces.
++ *
++ *		Driver ring initialization
++ *		Allocating memory for the descriptor rings and buffers is not
++ *		within the scope of this driver. Thus, the user is required to
++ *		allocate memory for the descriptors ring and buffers. Those
++ *		memory parameters are used by the Rx and Tx ring initialization
++ *		routines in order to curve the descriptor linked list in a form
++ *		of a ring.
++ *		Note: Pay special attention to alignment issues when using
++ *		cached descriptors/buffers. In this phase the driver store
++ *		information in the ETH_PORT_INFO struct regarding each queue
++ *		ring.
++ *
++ *		Driver start
++ *		This phase prepares the Ethernet port for Rx and Tx activity.
++ *		It uses the information stored in the ETH_PORT_INFO struct to
++ *		initialize the various port registers.
++ *
++ *		Data flow:
++ *		All packet references to/from the driver are done using PKT_INFO
++ *		struct.
++ *		This struct is a unified struct used with Rx and Tx operations.
++ *		This way the user is not required to be familiar with neither
++ *		Tx nor Rx descriptors structures.
++ *		The driver's descriptors rings are management by indexes.
++ *		Those indexes controls the ring resources and used to indicate
++ *		a SW resource error:
++ *		'current'
++ *		This index points to the current available resource for use. For
++ *		example in Rx process this index will point to the descriptor
++ *		that will be passed to the user upon calling the receive routine.
++ *		In Tx process, this index will point to the descriptor
++ *		that will be assigned with the user packet info and transmitted.
++ *		'used'
++ *		This index points to the descriptor that need to restore its
++ *		resources. For example in Rx process, using the Rx buffer return
++ *		API will attach the buffer returned in packet info to the
++ *		descriptor pointed by 'used'. In Tx process, using the Tx
++ *		descriptor return will merely return the user packet info with
++ *		the command status of  the transmitted buffer pointed by the
++ *		'used' index. Nevertheless, it is essential to use this routine
++ *		to update the 'used' index.
++ *		'first'
++ *		This index supports Tx Scatter-Gather. It points to the first
++ *		descriptor of a packet assembled of multiple buffers. For example
++ *		when in middle of Such packet we have a Tx resource error the
++ *		'curr' index get the value of 'first' to indicate that the ring
++ *		returned to its state before trying to transmit this packet.
++ *
++ *		Receive operation:
++ *		The eth_port_receive API set the packet information struct,
++ *		passed by the caller, with received information from the
++ *		'current' SDMA descriptor.
++ *		It is the user responsibility to return this resource back
++ *		to the Rx descriptor ring to enable the reuse of this source.
++ *		Return Rx resource is done using the eth_rx_return_buff API.
++ *
++ *		Transmit operation:
++ *		The eth_port_send API supports Scatter-Gather which enables to
++ *		send a packet spanned over multiple buffers. This means that
++ *		for each packet info structure given by the user and put into
++ *		the Tx descriptors ring, will be transmitted only if the 'LAST'
++ *		bit will be set in the packet info command status field. This
++ *		API also consider restriction regarding buffer alignments and
++ *		sizes.
++ *		The user must return a Tx resource after ensuring the buffer
++ *		has been transmitted to enable the Tx ring indexes to update.
++ *
++ *		BOARD LAYOUT
++ *		This device is on-board.  No jumper diagram is necessary.
++ *
++ *		EXTERNAL INTERFACE
++ *
++ *	 Prior to calling the initialization routine eth_port_init() the user
++ *	 must set the following fields under ETH_PORT_INFO struct:
++ *	 port_num	      User Ethernet port number.
++ *	 port_phy_addr		    User PHY address of Ethernet port.
++ *	 port_mac_addr[6]	    User defined port MAC address.
++ *	 port_config	      User port configuration value.
++ *	 port_config_extend    User port config extend value.
++ *	 port_sdma_config      User port SDMA config value.
++ *	 port_serial_control   User port serial control value.
++ *	 *port_virt_to_phys ()	User function to cast virtual addr to CPU bus addr.
++ *	 *port_private	      User scratch pad for user specific data structures.
++ *
++ *	 This driver introduce a set of default values:
++ *	 PORT_CONFIG_VALUE	     Default port configuration value
++ *	 PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
++ *	 PORT_SDMA_CONFIG_VALUE	     Default sdma control value
++ *	 PORT_SERIAL_CONTROL_VALUE   Default port serial control value
++ *
++ *		This driver data flow is done using the PKT_INFO struct which is
++ *		a unified struct for Rx and Tx operations:
++ *		byte_cnt	Tx/Rx descriptor buffer byte count.
++ *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
++ *		cmd_sts		Tx/Rx descriptor command status.
++ *		buf_ptr		Tx/Rx descriptor buffer pointer.
++ *		return_info	Tx/Rx user resource return information.
++ *
++ *
++ *		EXTERNAL SUPPORT REQUIREMENTS
++ *
++ *		This driver requires the following external support:
++ *
++ *		D_CACHE_FLUSH_LINE (address, address offset)
++ *
++ *		This macro applies assembly code to flush and invalidate cache
++ *		line.
++ *		address	       - address base.
++ *		address offset - address offset
++ *
++ *
++ *		CPU_PIPE_FLUSH
++ *
++ *		This macro applies assembly code to flush the CPU pipeline.
++ *
++ *******************************************************************************/
++/* includes */
++
++/* defines */
++/* SDMA command macros */
++#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
++ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
++
++#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
++ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
++ (1 << (8 + tx_queue)))
++
++#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
++MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
++
++#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
++MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
++
++#define CURR_RFD_GET(p_curr_desc, queue) \
++ ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
++
++#define CURR_RFD_SET(p_curr_desc, queue) \
++ (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
++
++#define USED_RFD_GET(p_used_desc, queue) \
++ ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
++
++#define USED_RFD_SET(p_used_desc, queue)\
++(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
++
++
++#define CURR_TFD_GET(p_curr_desc, queue) \
++ ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
++
++#define CURR_TFD_SET(p_curr_desc, queue) \
++ (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
++
++#define USED_TFD_GET(p_used_desc, queue) \
++ ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
++
++#define USED_TFD_SET(p_used_desc, queue) \
++ (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
++
++#define FIRST_TFD_GET(p_first_desc, queue) \
++ ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
++
++#define FIRST_TFD_SET(p_first_desc, queue) \
++ (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
++
++
++/* Macros that save access to desc in order to find next desc pointer  */
++#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
++
++#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
++
++#define LINK_UP_TIMEOUT		100000
++#define PHY_BUSY_TIMEOUT    10000000
++
++/* locals */
++
++/* PHY routines */
++static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
++static int ethernet_phy_get (ETH_PORT eth_port_num);
++
++/* Ethernet Port routines */
++static void eth_set_access_control (ETH_PORT eth_port_num,
++				    ETH_WIN_PARAM * param);
++static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
++			      ETH_QUEUE queue, int option);
++#if 0				/* FIXME */
++static bool eth_port_smc_addr (ETH_PORT eth_port_num,
++			       unsigned char mc_byte,
++			       ETH_QUEUE queue, int option);
++static bool eth_port_omc_addr (ETH_PORT eth_port_num,
++			       unsigned char crc8,
++			       ETH_QUEUE queue, int option);
++#endif
++
++static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
++			int byte_count);
++
++void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
++
++
++typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
++u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
++{
++	u32 result = 0;
++	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
++
++	if (enable & (1 << bank))
++		return 0;
++	if (bank == BANK0)
++		result = MV_REG_READ (MV64460_CS_0_BASE_ADDR);
++	if (bank == BANK1)
++		result = MV_REG_READ (MV64460_CS_1_BASE_ADDR);
++	if (bank == BANK2)
++		result = MV_REG_READ (MV64460_CS_2_BASE_ADDR);
++	if (bank == BANK3)
++		result = MV_REG_READ (MV64460_CS_3_BASE_ADDR);
++	result &= 0x0000ffff;
++	result = result << 16;
++	return result;
++}
++
++u32 mv_get_dram_bank_size (MEMORY_BANK bank)
++{
++	u32 result = 0;
++	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
++
++	if (enable & (1 << bank))
++		return 0;
++	if (bank == BANK0)
++		result = MV_REG_READ (MV64460_CS_0_SIZE);
++	if (bank == BANK1)
++		result = MV_REG_READ (MV64460_CS_1_SIZE);
++	if (bank == BANK2)
++		result = MV_REG_READ (MV64460_CS_2_SIZE);
++	if (bank == BANK3)
++		result = MV_REG_READ (MV64460_CS_3_SIZE);
++	result += 1;
++	result &= 0x0000ffff;
++	result = result << 16;
++	return result;
++}
++
++u32 mv_get_internal_sram_base (void)
++{
++	u32 result;
++
++	result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR);
++	result &= 0x0000ffff;
++	result = result << 16;
++	return result;
++}
++
++/*******************************************************************************
++* eth_port_init - Initialize the Ethernet port driver
++*
++* DESCRIPTION:
++*	This function prepares the ethernet port to start its activity:
++*	1) Completes the ethernet port driver struct initialization toward port
++*	    start routine.
++*	2) Resets the device to a quiescent state in case of warm reboot.
++*	3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
++*	4) Clean MAC tables. The reset status of those tables is unknown.
++*	5) Set PHY address.
++*	Note: Call this routine prior to eth_port_start routine and after setting
++*	user values in the user fields of Ethernet port control struct (i.e.
++*	port_phy_addr).
++*
++* INPUT:
++*	ETH_PORT_INFO	*p_eth_port_ctrl       Ethernet port control struct
++*
++* OUTPUT:
++*	See description.
++*
++* RETURN:
++*	None.
++*
++*******************************************************************************/
++static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
++{
++	int queue;
++	ETH_WIN_PARAM win_param;
++
++	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
++	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
++	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
++	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
++
++	p_eth_port_ctrl->port_rx_queue_command = 0;
++	p_eth_port_ctrl->port_tx_queue_command = 0;
++
++	/* Zero out SW structs */
++	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
++		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
++		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
++		p_eth_port_ctrl->rx_resource_err[queue] = false;
++	}
++
++	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
++		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
++		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
++		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
++		p_eth_port_ctrl->tx_resource_err[queue] = false;
++	}
++
++	eth_port_reset (p_eth_port_ctrl->port_num);
++
++	/* Set access parameters for DRAM bank 0 */
++	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
++	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR	*/
++	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
++#ifndef CONFIG_NOT_COHERENT_CACHE
++	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
++#endif
++	win_param.high_addr = 0;
++	/* Get bank base */
++	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
++	win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */
++	if (win_param.size == 0)
++		win_param.enable = 0;
++	else
++		win_param.enable = 1;	/* Enable the access */
++	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
++
++	/* Set the access control for address window (EPAPR) READ & WRITE */
++	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
++
++	/* Set access parameters for DRAM bank 1 */
++	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
++	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
++	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
++#ifndef CONFIG_NOT_COHERENT_CACHE
++	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
++#endif
++	win_param.high_addr = 0;
++	/* Get bank base */
++	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
++	win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */
++	if (win_param.size == 0)
++		win_param.enable = 0;
++	else
++		win_param.enable = 1;	/* Enable the access */
++	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
++
++	/* Set the access control for address window (EPAPR) READ & WRITE */
++	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
++
++	/* Set access parameters for DRAM bank 2 */
++	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
++	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
++	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
++#ifndef CONFIG_NOT_COHERENT_CACHE
++	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
++#endif
++	win_param.high_addr = 0;
++	/* Get bank base */
++	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
++	win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */
++	if (win_param.size == 0)
++		win_param.enable = 0;
++	else
++		win_param.enable = 1;	/* Enable the access */
++	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
++
++	/* Set the access control for address window (EPAPR) READ & WRITE */
++	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
++
++	/* Set access parameters for DRAM bank 3 */
++	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
++	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
++	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
++#ifndef CONFIG_NOT_COHERENT_CACHE
++	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
++#endif
++	win_param.high_addr = 0;
++	/* Get bank base */
++	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
++	win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */
++	if (win_param.size == 0)
++		win_param.enable = 0;
++	else
++		win_param.enable = 1;	/* Enable the access */
++	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
++
++	/* Set the access control for address window (EPAPR) READ & WRITE */
++	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
++
++	/* Set access parameters for Internal SRAM */
++	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
++	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
++	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
++	win_param.high_addr = 0;
++	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
++	win_param.size = MV64460_INTERNAL_SRAM_SIZE;	/* Get bank size */
++	win_param.enable = 1;	/* Enable the access */
++	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
++
++	/* Set the access control for address window (EPAPR) READ & WRITE */
++	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
++
++	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
++
++	ethernet_phy_set (p_eth_port_ctrl->port_num,
++			  p_eth_port_ctrl->port_phy_addr);
++
++	return;
++
++}
++
++/*******************************************************************************
++* eth_port_start - Start the Ethernet port activity.
++*
++* DESCRIPTION:
++*	This routine prepares the Ethernet port for Rx and Tx activity:
++*	1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
++*	    has been initialized a descriptor's ring (using ether_init_tx_desc_ring
++*	    for Tx and ether_init_rx_desc_ring for Rx)
++*	2. Initialize and enable the Ethernet configuration port by writing to
++*	    the port's configuration and command registers.
++*	3. Initialize and enable the SDMA by writing to the SDMA's
++*    configuration and command registers.
++*	After completing these steps, the ethernet port SDMA can starts to
++*	perform Rx and Tx activities.
++*
++*	Note: Each Rx and Tx queue descriptor's list must be initialized prior
++*	to calling this function (use ether_init_tx_desc_ring for Tx queues and
++*	ether_init_rx_desc_ring for Rx queues).
++*
++* INPUT:
++*	ETH_PORT_INFO	*p_eth_port_ctrl       Ethernet port control struct
++*
++* OUTPUT:
++*	Ethernet port is ready to receive and transmit.
++*
++* RETURN:
++*	false if the port PHY is not up.
++*	true otherwise.
++*
++*******************************************************************************/
++static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
++{
++	int queue;
++	volatile ETH_TX_DESC *p_tx_curr_desc;
++	volatile ETH_RX_DESC *p_rx_curr_desc;
++	unsigned int phy_reg_data;
++	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
++
++	/* Assignment of Tx CTRP of given queue */
++	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
++		CURR_TFD_GET (p_tx_curr_desc, queue);
++		MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
++			       (eth_port_num)
++			       + (4 * queue)),
++			      ((unsigned int) p_tx_curr_desc));
++
++	}
++
++	/* Assignment of Rx CRDP of given queue */
++	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
++		CURR_RFD_GET (p_rx_curr_desc, queue);
++		MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
++			       (eth_port_num)
++			       + (4 * queue)),
++			      ((unsigned int) p_rx_curr_desc));
++
++		if (p_rx_curr_desc != NULL)
++			/* Add the assigned Ethernet address to the port's address table */
++			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
++					      p_eth_port_ctrl->port_mac_addr,
++					      queue);
++	}
++
++	/* Assign port configuration and command. */
++	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
++		      p_eth_port_ctrl->port_config);
++
++	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
++		      p_eth_port_ctrl->port_config_extend);
++
++	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
++		      p_eth_port_ctrl->port_serial_control);
++
++	MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
++			 ETH_SERIAL_PORT_ENABLE);
++
++	/* Assign port SDMA configuration */
++	MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
++		      p_eth_port_ctrl->port_sdma_config);
++
++	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
++		      (eth_port_num), 0x3fffffff);
++	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
++		      (eth_port_num), 0x03fffcff);
++	/* Turn off the port/queue bandwidth limitation */
++	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
++
++	/* Enable port Rx. */
++	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
++		      p_eth_port_ctrl->port_rx_queue_command);
++
++	/* Check if link is up */
++	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
++
++	if (!(phy_reg_data & 0x20))
++		return false;
++
++	return true;
++}
++
++/*******************************************************************************
++* eth_port_uc_addr_set - This function Set the port Unicast address.
++*
++* DESCRIPTION:
++*		This function Set the port Ethernet MAC address.
++*
++* INPUT:
++*	ETH_PORT eth_port_num	  Port number.
++*	char *	      p_addr		Address to be set
++*	ETH_QUEUE	  queue		Rx queue number for this MAC address.
++*
++* OUTPUT:
++*	Set MAC address low and high registers. also calls eth_port_uc_addr()
++*	To set the unicast table with the proper information.
++*
++* RETURN:
++*	N/A.
++*
++*******************************************************************************/
++static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
++				  unsigned char *p_addr, ETH_QUEUE queue)
++{
++	unsigned int mac_h;
++	unsigned int mac_l;
++
++	mac_l = (p_addr[4] << 8) | (p_addr[5]);
++	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
++		(p_addr[2] << 8) | (p_addr[3] << 0);
++
++	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
++	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
++
++	/* Accept frames of this address */
++	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
++
++	return;
++}
++
++/*******************************************************************************
++* eth_port_uc_addr - This function Set the port unicast address table
++*
++* DESCRIPTION:
++*	This function locates the proper entry in the Unicast table for the
++*	specified MAC nibble and sets its properties according to function
++*	parameters.
++*
++* INPUT:
++*	ETH_PORT	eth_port_num	  Port number.
++*	unsigned char uc_nibble		Unicast MAC Address last nibble.
++*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
++*	int			option	    0 = Add, 1 = remove address.
++*
++* OUTPUT:
++*	This function add/removes MAC addresses from the port unicast address
++*	table.
++*
++* RETURN:
++*	true is output succeeded.
++*	false if option parameter is invalid.
++*
++*******************************************************************************/
++static bool eth_port_uc_addr (ETH_PORT eth_port_num,
++			      unsigned char uc_nibble,
++			      ETH_QUEUE queue, int option)
++{
++	unsigned int unicast_reg;
++	unsigned int tbl_offset;
++	unsigned int reg_offset;
++
++	/* Locate the Unicast table entry */
++	uc_nibble = (0xf & uc_nibble);
++	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
++	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
++
++	switch (option) {
++	case REJECT_MAC_ADDR:
++		/* Clear accepts frame bit at specified unicast DA table entry */
++		unicast_reg =
++			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
++				      (eth_port_num)
++				      + tbl_offset));
++
++		unicast_reg &= (0x0E << (8 * reg_offset));
++
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
++			       (eth_port_num)
++			       + tbl_offset), unicast_reg);
++		break;
++
++	case ACCEPT_MAC_ADDR:
++		/* Set accepts frame bit at unicast DA filter table entry */
++		unicast_reg =
++			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
++				      (eth_port_num)
++				      + tbl_offset));
++
++		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
++
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
++			       (eth_port_num)
++			       + tbl_offset), unicast_reg);
++
++		break;
++
++	default:
++		return false;
++	}
++	return true;
++}
++
++#if 0				/* FIXME */
++/*******************************************************************************
++* eth_port_mc_addr - Multicast address settings.
++*
++* DESCRIPTION:
++*	This API controls the MV device MAC multicast support.
++*	The MV device supports multicast using two tables:
++*	1) Special Multicast Table for MAC addresses of the form
++*	   0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
++*	   The MAC DA[7:0] bits are used as a pointer to the Special Multicast
++*	   Table entries in the DA-Filter table.
++*	   In this case, the function calls eth_port_smc_addr() routine to set the
++*	   Special Multicast Table.
++*	2) Other Multicast Table for multicast of another type. A CRC-8bit
++*	   is used as an index to the Other Multicast Table entries in the
++*	   DA-Filter table.
++*	   In this case, the function calculates the CRC-8bit value and calls
++*	   eth_port_omc_addr() routine to set the Other Multicast Table.
++* INPUT:
++*	ETH_PORT	eth_port_num	  Port number.
++*	unsigned char	*p_addr		Unicast MAC Address.
++*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
++*	int			option	    0 = Add, 1 = remove address.
++*
++* OUTPUT:
++*	See description.
++*
++* RETURN:
++*	true is output succeeded.
++*	false if add_address_table_entry( ) failed.
++*
++*******************************************************************************/
++static void eth_port_mc_addr (ETH_PORT eth_port_num,
++			      unsigned char *p_addr,
++			      ETH_QUEUE queue, int option)
++{
++	unsigned int mac_h;
++	unsigned int mac_l;
++	unsigned char crc_result = 0;
++	int mac_array[48];
++	int crc[8];
++	int i;
++
++	if ((p_addr[0] == 0x01) &&
++	    (p_addr[1] == 0x00) &&
++	    (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) {
++
++		eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
++	} else {
++		/* Calculate CRC-8 out of the given address */
++		mac_h = (p_addr[0] << 8) | (p_addr[1]);
++		mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
++			(p_addr[4] << 8) | (p_addr[5] << 0);
++
++		for (i = 0; i < 32; i++)
++			mac_array[i] = (mac_l >> i) & 0x1;
++		for (i = 32; i < 48; i++)
++			mac_array[i] = (mac_h >> (i - 32)) & 0x1;
++
++		crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
++			mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
++			mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
++			mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
++			mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
++			mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
++			mac_array[6] ^ mac_array[0];
++
++		crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
++			mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
++			mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
++			mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
++			mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
++			mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
++			mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
++			mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
++			mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
++			mac_array[0];
++
++		crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
++			mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
++			mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
++			mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
++			mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
++			mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
++			mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
++			mac_array[2] ^ mac_array[1] ^ mac_array[0];
++
++		crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
++			mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
++			mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
++			mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
++			mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
++			mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
++			mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
++			mac_array[2] ^ mac_array[1];
++
++		crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
++			mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
++			mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
++			mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
++			mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
++			mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
++			mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
++			mac_array[2];
++
++		crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
++			mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
++			mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
++			mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
++			mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
++			mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
++			mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
++			mac_array[3];
++
++		crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
++			mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
++			mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
++			mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
++			mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
++			mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
++			mac_array[6] ^ mac_array[5] ^ mac_array[4];
++
++		crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
++			mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
++			mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
++			mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
++			mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
++			mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
++			mac_array[6] ^ mac_array[5];
++
++		for (i = 0; i < 8; i++)
++			crc_result = crc_result | (crc[i] << i);
++
++		eth_port_omc_addr (eth_port_num, crc_result, queue, option);
++	}
++	return;
++}
++
++/*******************************************************************************
++* eth_port_smc_addr - Special Multicast address settings.
++*
++* DESCRIPTION:
++*	This routine controls the MV device special MAC multicast support.
++*	The Special Multicast Table for MAC addresses supports MAC of the form
++*	0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
++*	The MAC DA[7:0] bits are used as a pointer to the Special Multicast
++*	Table entries in the DA-Filter table.
++*	This function set the Special Multicast Table appropriate entry
++*	according to the argument given.
++*
++* INPUT:
++*	ETH_PORT	eth_port_num	  Port number.
++*	unsigned char	mc_byte		Multicast addr last byte (MAC DA[7:0] bits).
++*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
++*	int			option	    0 = Add, 1 = remove address.
++*
++* OUTPUT:
++*	See description.
++*
++* RETURN:
++*	true is output succeeded.
++*	false if option parameter is invalid.
++*
++*******************************************************************************/
++static bool eth_port_smc_addr (ETH_PORT eth_port_num,
++			       unsigned char mc_byte,
++			       ETH_QUEUE queue, int option)
++{
++	unsigned int smc_table_reg;
++	unsigned int tbl_offset;
++	unsigned int reg_offset;
++
++	/* Locate the SMC table entry */
++	tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */
++	reg_offset = mc_byte % 4;	/* Entry offset within the above register */
++	queue &= 0x7;
++
++	switch (option) {
++	case REJECT_MAC_ADDR:
++		/* Clear accepts frame bit at specified Special DA table entry */
++		smc_table_reg =
++			MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
++		smc_table_reg &= (0x0E << (8 * reg_offset));
++
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
++		break;
++
++	case ACCEPT_MAC_ADDR:
++		/* Set accepts frame bit at specified Special DA table entry */
++		smc_table_reg =
++			MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
++		smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
++
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
++		break;
++
++	default:
++		return false;
++	}
++	return true;
++}
++
++/*******************************************************************************
++* eth_port_omc_addr - Multicast address settings.
++*
++* DESCRIPTION:
++*	This routine controls the MV device Other MAC multicast support.
++*	The Other Multicast Table is used for multicast of another type.
++*	A CRC-8bit is used as an index to the Other Multicast Table entries
++*	in the DA-Filter table.
++*	The function gets the CRC-8bit value from the calling routine and
++*      set the Other Multicast Table appropriate entry according to the
++*	CRC-8 argument given.
++*
++* INPUT:
++*	ETH_PORT	eth_port_num	  Port number.
++*	unsigned char	  crc8		A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
++*	ETH_QUEUE		 queue		Rx queue number for this MAC address.
++*	int			option	    0 = Add, 1 = remove address.
++*
++* OUTPUT:
++*	See description.
++*
++* RETURN:
++*	true is output succeeded.
++*	false if option parameter is invalid.
++*
++*******************************************************************************/
++static bool eth_port_omc_addr (ETH_PORT eth_port_num,
++			       unsigned char crc8,
++			       ETH_QUEUE queue, int option)
++{
++	unsigned int omc_table_reg;
++	unsigned int tbl_offset;
++	unsigned int reg_offset;
++
++	/* Locate the OMC table entry */
++	tbl_offset = (crc8 / 4) * 4;	/* Register offset from OMC table base */
++	reg_offset = crc8 % 4;	/* Entry offset within the above register */
++	queue &= 0x7;
++
++	switch (option) {
++	case REJECT_MAC_ADDR:
++		/* Clear accepts frame bit at specified Other DA table entry */
++		omc_table_reg =
++			MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
++		omc_table_reg &= (0x0E << (8 * reg_offset));
++
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
++		break;
++
++	case ACCEPT_MAC_ADDR:
++		/* Set accepts frame bit at specified Other DA table entry */
++		omc_table_reg =
++			MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
++		omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
++
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
++		break;
++
++	default:
++		return false;
++	}
++	return true;
++}
++#endif
++
++/*******************************************************************************
++* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
++*
++* DESCRIPTION:
++*	Go through all the DA filter tables (Unicast, Special Multicast & Other
++*	Multicast) and set each entry to 0.
++*
++* INPUT:
++*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
++*
++* OUTPUT:
++*	Multicast and Unicast packets are rejected.
++*
++* RETURN:
++*	None.
++*
++*******************************************************************************/
++static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
++{
++	int table_index;
++
++	/* Clear DA filter unicast table (Ex_dFUT) */
++	for (table_index = 0; table_index <= 0xC; table_index += 4)
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
++			       (eth_port_num) + table_index), 0);
++
++	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
++		/* Clear DA filter special multicast table (Ex_dFSMT) */
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
++		/* Clear DA filter other multicast table (Ex_dFOMT) */
++		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
++	}
++}
++
++/*******************************************************************************
++* eth_clear_mib_counters - Clear all MIB counters
++*
++* DESCRIPTION:
++*	This function clears all MIB counters of a specific ethernet port.
++*	A read from the MIB counter will reset the counter.
++*
++* INPUT:
++*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
++*
++* OUTPUT:
++*	After reading all MIB counters, the counters resets.
++*
++* RETURN:
++*	MIB counter value.
++*
++*******************************************************************************/
++static void eth_clear_mib_counters (ETH_PORT eth_port_num)
++{
++	int i;
++	unsigned int dummy;
++
++	/* Perform dummy reads from MIB counters */
++	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
++	     i += 4)
++		dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE
++				      (eth_port_num) + i));
++
++	return;
++}
++
++/*******************************************************************************
++* eth_read_mib_counter - Read a MIB counter
++*
++* DESCRIPTION:
++*	This function reads a MIB counter of a specific ethernet port.
++*	NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
++*	following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
++*	register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
++*	ETH_MIB_GOOD_OCTETS_SENT_HIGH
++*
++* INPUT:
++*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
++*	unsigned int mib_offset	  MIB counter offset (use ETH_MIB_... macros).
++*
++* OUTPUT:
++*	After reading the MIB counter, the counter resets.
++*
++* RETURN:
++*	MIB counter value.
++*
++*******************************************************************************/
++unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
++				   unsigned int mib_offset)
++{
++	return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num)
++			     + mib_offset));
++}
++
++/*******************************************************************************
++* ethernet_phy_set - Set the ethernet port PHY address.
++*
++* DESCRIPTION:
++*	This routine set the ethernet port PHY address according to given
++*	parameter.
++*
++* INPUT:
++*		ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++*
++* OUTPUT:
++*	Set PHY Address Register with given PHY address parameter.
++*
++* RETURN:
++*	None.
++*
++*******************************************************************************/
++static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
++{
++	unsigned int reg_data;
++
++	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
++
++	reg_data &= ~(0x1F << (5 * eth_port_num));
++	reg_data |= (phy_addr << (5 * eth_port_num));
++
++	MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data);
++
++	return;
++}
++
++/*******************************************************************************
++ * ethernet_phy_get - Get the ethernet port PHY address.
++ *
++ * DESCRIPTION:
++ *	 This routine returns the given ethernet port PHY address.
++ *
++ * INPUT:
++ *		ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *
++ * OUTPUT:
++ *	 None.
++ *
++ * RETURN:
++ *	 PHY address.
++ *
++ *******************************************************************************/
++static int ethernet_phy_get (ETH_PORT eth_port_num)
++{
++	unsigned int reg_data;
++
++	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
++
++	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
++}
++
++/***********************************************************/
++/* (Re)start autonegotiation				   */
++/***********************************************************/
++int phy_setup_aneg (char *devname, unsigned char addr)
++{
++	unsigned short ctl, adv;
++
++	/* Setup standard advertise */
++	miiphy_read (devname, addr, PHY_ANAR, &adv);
++	adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
++		PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
++		PHY_ANLPAR_10);
++	miiphy_write (devname, addr, PHY_ANAR, adv);
++
++	miiphy_read (devname, addr, PHY_1000BTCR, &adv);
++	adv |= (0x0300);
++	miiphy_write (devname, addr, PHY_1000BTCR, adv);
++
++	/* Start/Restart aneg */
++	miiphy_read (devname, addr, PHY_BMCR, &ctl);
++	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
++	miiphy_write (devname, addr, PHY_BMCR, ctl);
++
++	return 0;
++}
++
++/*******************************************************************************
++ * ethernet_phy_reset - Reset Ethernet port PHY.
++ *
++ * DESCRIPTION:
++ *	 This routine utilize the SMI interface to reset the ethernet port PHY.
++ *	 The routine waits until the link is up again or link up is timeout.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *
++ * OUTPUT:
++ *	 The ethernet port PHY renew its link.
++ *
++ * RETURN:
++ *	 None.
++ *
++ *******************************************************************************/
++static bool ethernet_phy_reset (ETH_PORT eth_port_num)
++{
++	unsigned int time_out = 50;
++	unsigned int phy_reg_data;
++
++	eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data);
++	phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */
++	eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data);
++
++	/* Reset the PHY */
++	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
++	phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
++	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
++
++	/* Poll on the PHY LINK */
++	do {
++		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
++
++		if (time_out-- == 0)
++			return false;
++	}
++	while (!(phy_reg_data & 0x20));
++
++	return true;
++}
++
++/*******************************************************************************
++ * eth_port_reset - Reset Ethernet port
++ *
++ * DESCRIPTION:
++ *	This routine resets the chip by aborting any SDMA engine activity and
++ *	clearing the MIB counters. The Receiver and the Transmit unit are in
++ *	idle state after this command is performed and the port is disabled.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *
++ * OUTPUT:
++ *	 Channel activity is halted.
++ *
++ * RETURN:
++ *	 None.
++ *
++ *******************************************************************************/
++static void eth_port_reset (ETH_PORT eth_port_num)
++{
++	unsigned int reg_data;
++
++	/* Stop Tx port activity. Check port Tx activity. */
++	reg_data =
++		MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
++			     (eth_port_num));
++
++	if (reg_data & 0xFF) {
++		/* Issue stop command for active channels only */
++		MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
++			      (eth_port_num), (reg_data << 8));
++
++		/* Wait for all Tx activity to terminate. */
++		do {
++			/* Check port cause register that all Tx queues are stopped */
++			reg_data =
++				MV_REG_READ
++				(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
++				 (eth_port_num));
++		}
++		while (reg_data & 0xFF);
++	}
++
++	/* Stop Rx port activity. Check port Rx activity. */
++	reg_data =
++		MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
++			     (eth_port_num));
++
++	if (reg_data & 0xFF) {
++		/* Issue stop command for active channels only */
++		MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
++			      (eth_port_num), (reg_data << 8));
++
++		/* Wait for all Rx activity to terminate. */
++		do {
++			/* Check port cause register that all Rx queues are stopped */
++			reg_data =
++				MV_REG_READ
++				(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
++				 (eth_port_num));
++		}
++		while (reg_data & 0xFF);
++	}
++
++	/* Clear all MIB counters */
++	eth_clear_mib_counters (eth_port_num);
++
++	/* Reset the Enable bit in the Configuration Register */
++	reg_data =
++		MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG
++			     (eth_port_num));
++	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
++	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
++		      reg_data);
++
++	return;
++}
++
++#if 0				/* Not needed here */
++/*******************************************************************************
++ * ethernet_set_config_reg - Set specified bits in configuration register.
++ *
++ * DESCRIPTION:
++ *	 This function sets specified bits in the given ethernet
++ *	 configuration register.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *	unsigned int	value	32 bit value.
++ *
++ * OUTPUT:
++ *	The set bits in the value parameter are set in the configuration
++ *	register.
++ *
++ * RETURN:
++ *	None.
++ *
++ *******************************************************************************/
++static void ethernet_set_config_reg (ETH_PORT eth_port_num,
++				     unsigned int value)
++{
++	unsigned int eth_config_reg;
++
++	eth_config_reg =
++		MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num));
++	eth_config_reg |= value;
++	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
++		      eth_config_reg);
++
++	return;
++}
++#endif
++
++#if 0				/* FIXME */
++/*******************************************************************************
++ * ethernet_reset_config_reg - Reset specified bits in configuration register.
++ *
++ * DESCRIPTION:
++ *	 This function resets specified bits in the given Ethernet
++ *	 configuration register.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *	unsigned int	value	32 bit value.
++ *
++ * OUTPUT:
++ *	The set bits in the value parameter are reset in the configuration
++ *	register.
++ *
++ * RETURN:
++ *	None.
++ *
++ *******************************************************************************/
++static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
++				       unsigned int value)
++{
++	unsigned int eth_config_reg;
++
++	eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
++				      (eth_port_num));
++	eth_config_reg &= ~value;
++	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
++		      eth_config_reg);
++
++	return;
++}
++#endif
++
++#if 0				/* Not needed here */
++/*******************************************************************************
++ * ethernet_get_config_reg - Get the port configuration register
++ *
++ * DESCRIPTION:
++ *	 This function returns the configuration register value of the given
++ *	 ethernet port.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *
++ * OUTPUT:
++ *	 None.
++ *
++ * RETURN:
++ *	 Port configuration register value.
++ *
++ *******************************************************************************/
++static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
++{
++	unsigned int eth_config_reg;
++
++	eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
++				      (eth_port_num));
++	return eth_config_reg;
++}
++
++#endif
++
++/*******************************************************************************
++ * eth_port_read_smi_reg - Read PHY registers
++ *
++ * DESCRIPTION:
++ *	 This routine utilize the SMI interface to interact with the PHY in
++ *	 order to perform PHY register read.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *	 unsigned int	phy_reg	  PHY register address offset.
++ *	 unsigned int	*value	 Register value buffer.
++ *
++ * OUTPUT:
++ *	 Write the value of a specified PHY register into given buffer.
++ *
++ * RETURN:
++ *	 false if the PHY is busy or read data is not in valid state.
++ *	 true otherwise.
++ *
++ *******************************************************************************/
++static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
++				   unsigned int phy_reg, unsigned int *value)
++{
++	unsigned int reg_value;
++	unsigned int time_out = PHY_BUSY_TIMEOUT;
++	int phy_addr;
++
++	phy_addr = ethernet_phy_get (eth_port_num);
++
++	/* first check that it is not busy */
++	do {
++		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++		if (time_out-- == 0) {
++			return false;
++		}
++	}
++	while (reg_value & ETH_SMI_BUSY);
++
++	/* not busy */
++
++	MV_REG_WRITE (MV64460_ETH_SMI_REG,
++		      (phy_addr << 16) | (phy_reg << 21) |
++		      ETH_SMI_OPCODE_READ);
++
++	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
++
++	do {
++		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++		if (time_out-- == 0) {
++			return false;
++		}
++	}
++	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
++
++	/* Wait for the data to update in the SMI register */
++#define PHY_UPDATE_TIMEOUT	10000
++	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
++
++	reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++
++	*value = reg_value & 0xffff;
++
++	return true;
++}
++
++int mv_miiphy_read(char *devname, unsigned char phy_addr,
++		   unsigned char phy_reg, unsigned short *value)
++{
++	unsigned int reg_value;
++	unsigned int time_out = PHY_BUSY_TIMEOUT;
++
++	/* first check that it is not busy */
++	do {
++		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++		if (time_out-- == 0) {
++			return false;
++		}
++	}
++	while (reg_value & ETH_SMI_BUSY);
++
++	/* not busy */
++	MV_REG_WRITE (MV64460_ETH_SMI_REG,
++		      (phy_addr << 16) | (phy_reg << 21) |
++		      ETH_SMI_OPCODE_READ);
++
++	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
++
++	do {
++		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++		if (time_out-- == 0) {
++			return false;
++		}
++	}
++	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
++
++	/* Wait for the data to update in the SMI register */
++	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
++
++	reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++
++	*value = reg_value & 0xffff;
++
++	return 0;
++}
++
++/*******************************************************************************
++ * eth_port_write_smi_reg - Write to PHY registers
++ *
++ * DESCRIPTION:
++ *	 This routine utilize the SMI interface to interact with the PHY in
++ *	 order to perform writes to PHY registers.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *	unsigned int   phy_reg	 PHY register address offset.
++ *	unsigned int	value	Register value.
++ *
++ * OUTPUT:
++ *	Write the given value to the specified PHY register.
++ *
++ * RETURN:
++ *	false if the PHY is busy.
++ *	true otherwise.
++ *
++ *******************************************************************************/
++static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
++				    unsigned int phy_reg, unsigned int value)
++{
++	unsigned int reg_value;
++	unsigned int time_out = PHY_BUSY_TIMEOUT;
++	int phy_addr;
++
++	phy_addr = ethernet_phy_get (eth_port_num);
++
++	/* first check that it is not busy */
++	do {
++		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++		if (time_out-- == 0) {
++			return false;
++		}
++	}
++	while (reg_value & ETH_SMI_BUSY);
++
++	/* not busy */
++	MV_REG_WRITE (MV64460_ETH_SMI_REG,
++		      (phy_addr << 16) | (phy_reg << 21) |
++		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
++	return true;
++}
++
++int mv_miiphy_write(char *devname, unsigned char phy_addr,
++		    unsigned char phy_reg, unsigned short value)
++{
++	unsigned int reg_value;
++	unsigned int time_out = PHY_BUSY_TIMEOUT;
++
++	/* first check that it is not busy */
++	do {
++		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
++		if (time_out-- == 0) {
++			return false;
++		}
++	}
++	while (reg_value & ETH_SMI_BUSY);
++
++	/* not busy */
++	MV_REG_WRITE (MV64460_ETH_SMI_REG,
++		      (phy_addr << 16) | (phy_reg << 21) |
++		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
++	return 0;
++}
++
++/*******************************************************************************
++ * eth_set_access_control - Config address decode parameters for Ethernet unit
++ *
++ * DESCRIPTION:
++ *	 This function configures the address decode parameters for the Gigabit
++ *	 Ethernet Controller according the given parameters struct.
++ *
++ * INPUT:
++ *	ETH_PORT   eth_port_num	  Ethernet Port number. See ETH_PORT enum.
++ *	 ETH_WIN_PARAM	*param	 Address decode parameter struct.
++ *
++ * OUTPUT:
++ *	 An access window is opened using the given access parameters.
++ *
++ * RETURN:
++ *	 None.
++ *
++ *******************************************************************************/
++static void eth_set_access_control (ETH_PORT eth_port_num,
++				    ETH_WIN_PARAM * param)
++{
++	unsigned int access_prot_reg;
++
++	/* Set access control register */
++	access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG
++				       (eth_port_num));
++	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
++	access_prot_reg |= (param->access_ctrl << (param->win * 2));
++	MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num),
++		      access_prot_reg);
++
++	/* Set window Size reg (SR) */
++	MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 +
++		       (ETH_SIZE_REG_GAP * param->win)),
++		      (((param->size / 0x10000) - 1) << 16));
++
++	/* Set window Base address reg (BA) */
++	MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
++		      (param->target | param->attributes | param->base_addr));
++	/* High address remap reg (HARR) */
++	if (param->win < 4)
++		MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 +
++			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
++			      param->high_addr);
++
++	/* Base address enable reg (BARER) */
++	if (param->enable == 1)
++		MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
++				   (1 << param->win));
++	else
++		MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
++				 (1 << param->win));
++}
++
++/*******************************************************************************
++ * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
++ *
++ * DESCRIPTION:
++ *	 This function prepares a Rx chained list of descriptors and packet
++ *	 buffers in a form of a ring. The routine must be called after port
++ *	 initialization routine and before port start routine.
++ *	 The Ethernet SDMA engine uses CPU bus addresses to access the various
++ *	 devices in the system (i.e. DRAM). This function uses the ethernet
++ *	 struct 'virtual to physical' routine (set by the user) to set the ring
++ *	 with physical addresses.
++ *
++ * INPUT:
++ *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
++ *	ETH_QUEUE	rx_queue	 Number of Rx queue.
++ *	int			rx_desc_num	  Number of Rx descriptors
++ *	int			rx_buff_size	  Size of Rx buffer
++ *	unsigned int	rx_desc_base_addr  Rx descriptors memory area base addr.
++ *	unsigned int	rx_buff_base_addr  Rx buffer memory area base addr.
++ *
++ * OUTPUT:
++ *	The routine updates the Ethernet port control struct with information
++ *	regarding the Rx descriptors and buffers.
++ *
++ * RETURN:
++ *	false if the given descriptors memory area is not aligned according to
++ *	Ethernet SDMA specifications.
++ *	true otherwise.
++ *
++ *******************************************************************************/
++static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
++				     ETH_QUEUE rx_queue,
++				     int rx_desc_num,
++				     int rx_buff_size,
++				     unsigned int rx_desc_base_addr,
++				     unsigned int rx_buff_base_addr)
++{
++	ETH_RX_DESC *p_rx_desc;
++	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
++	unsigned int buffer_addr;
++	int ix;			/* a counter */
++
++	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
++	p_rx_prev_desc = p_rx_desc;
++	buffer_addr = rx_buff_base_addr;
++
++	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
++	if (rx_buff_base_addr & 0xF)
++		return false;
++
++	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
++	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
++		return false;
++
++	/* Rx buffers must be 64-bit aligned.	    */
++	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
++		return false;
++
++	/* initialize the Rx descriptors ring */
++	for (ix = 0; ix < rx_desc_num; ix++) {
++		p_rx_desc->buf_size = rx_buff_size;
++		p_rx_desc->byte_cnt = 0x0000;
++		p_rx_desc->cmd_sts =
++			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
++		p_rx_desc->next_desc_ptr =
++			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
++		p_rx_desc->buf_ptr = buffer_addr;
++		p_rx_desc->return_info = 0x00000000;
++		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
++		buffer_addr += rx_buff_size;
++		p_rx_prev_desc = p_rx_desc;
++		p_rx_desc = (ETH_RX_DESC *)
++			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
++	}
++
++	/* Closing Rx descriptors ring */
++	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
++	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
++
++	/* Save Rx desc pointer to driver struct. */
++	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
++	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
++
++	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
++		(ETH_RX_DESC *) rx_desc_base_addr;
++	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
++		rx_desc_num * RX_DESC_ALIGNED_SIZE;
++
++	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
++
++	return true;
++}
++
++/*******************************************************************************
++ * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
++ *
++ * DESCRIPTION:
++ *	 This function prepares a Tx chained list of descriptors and packet
++ *	 buffers in a form of a ring. The routine must be called after port
++ *	 initialization routine and before port start routine.
++ *	 The Ethernet SDMA engine uses CPU bus addresses to access the various
++ *	 devices in the system (i.e. DRAM). This function uses the ethernet
++ *	 struct 'virtual to physical' routine (set by the user) to set the ring
++ *	 with physical addresses.
++ *
++ * INPUT:
++ *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
++ *	ETH_QUEUE	tx_queue	 Number of Tx queue.
++ *	int			tx_desc_num	  Number of Tx descriptors
++ *	int			tx_buff_size	  Size of Tx buffer
++ *	unsigned int	tx_desc_base_addr  Tx descriptors memory area base addr.
++ *	unsigned int	tx_buff_base_addr  Tx buffer memory area base addr.
++ *
++ * OUTPUT:
++ *	The routine updates the Ethernet port control struct with information
++ *	regarding the Tx descriptors and buffers.
++ *
++ * RETURN:
++ *	false if the given descriptors memory area is not aligned according to
++ *	Ethernet SDMA specifications.
++ *	true otherwise.
++ *
++ *******************************************************************************/
++static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
++				     ETH_QUEUE tx_queue,
++				     int tx_desc_num,
++				     int tx_buff_size,
++				     unsigned int tx_desc_base_addr,
++				     unsigned int tx_buff_base_addr)
++{
++
++	ETH_TX_DESC *p_tx_desc;
++	ETH_TX_DESC *p_tx_prev_desc;
++	unsigned int buffer_addr;
++	int ix;			/* a counter */
++
++	/* save the first desc pointer to link with the last descriptor */
++	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
++	p_tx_prev_desc = p_tx_desc;
++	buffer_addr = tx_buff_base_addr;
++
++	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
++	if (tx_buff_base_addr & 0xF)
++		return false;
++
++	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
++	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
++	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
++		return false;
++
++	/* Initialize the Tx descriptors ring */
++	for (ix = 0; ix < tx_desc_num; ix++) {
++		p_tx_desc->byte_cnt = 0x0000;
++		p_tx_desc->l4i_chk = 0x0000;
++		p_tx_desc->cmd_sts = 0x00000000;
++		p_tx_desc->next_desc_ptr =
++			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
++
++		p_tx_desc->buf_ptr = buffer_addr;
++		p_tx_desc->return_info = 0x00000000;
++		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
++		buffer_addr += tx_buff_size;
++		p_tx_prev_desc = p_tx_desc;
++		p_tx_desc = (ETH_TX_DESC *)
++			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
++
++	}
++	/* Closing Tx descriptors ring */
++	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
++	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
++	/* Set Tx desc pointer in driver struct. */
++	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
++	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
++
++	/* Init Tx ring base and size parameters */
++	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
++		(ETH_TX_DESC *) tx_desc_base_addr;
++	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
++		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
++
++	/* Add the queue to the list of Tx queues of this port */
++	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
++
++	return true;
++}
++
++/*******************************************************************************
++ * eth_port_send - Send an Ethernet packet
++ *
++ * DESCRIPTION:
++ *	This routine send a given packet described by p_pktinfo parameter. It
++ *	supports transmitting of a packet spaned over multiple buffers. The
++ *	routine updates 'curr' and 'first' indexes according to the packet
++ *	segment passed to the routine. In case the packet segment is first,
++ *	the 'first' index is update. In any case, the 'curr' index is updated.
++ *	If the routine get into Tx resource error it assigns 'curr' index as
++ *	'first'. This way the function can abort Tx process of multiple
++ *	descriptors per packet.
++ *
++ * INPUT:
++ *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
++ *	ETH_QUEUE	tx_queue	 Number of Tx queue.
++ *	PKT_INFO	*p_pkt_info	  User packet buffer.
++ *
++ * OUTPUT:
++ *	Tx ring 'curr' and 'first' indexes are updated.
++ *
++ * RETURN:
++ *	ETH_QUEUE_FULL in case of Tx resource error.
++ *	ETH_ERROR in case the routine can not access Tx desc ring.
++ *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
++ *	ETH_OK otherwise.
++ *
++ *******************************************************************************/
++static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
++					  ETH_QUEUE tx_queue,
++					  PKT_INFO * p_pkt_info)
++{
++	volatile ETH_TX_DESC *p_tx_desc_first;
++	volatile ETH_TX_DESC *p_tx_desc_curr;
++	volatile ETH_TX_DESC *p_tx_next_desc_curr;
++	volatile ETH_TX_DESC *p_tx_desc_used;
++	unsigned int command_status;
++
++	/* Do not process Tx ring in case of Tx ring resource error */
++	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
++		return ETH_QUEUE_FULL;
++
++	/* Get the Tx Desc ring indexes */
++	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
++	USED_TFD_GET (p_tx_desc_used, tx_queue);
++
++	if (p_tx_desc_curr == NULL)
++		return ETH_ERROR;
++
++	/* The following parameters are used to save readings from memory */
++	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
++	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
++
++	if (command_status & (ETH_TX_FIRST_DESC)) {
++		/* Update first desc */
++		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
++		p_tx_desc_first = p_tx_desc_curr;
++	} else {
++		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
++		command_status |= ETH_BUFFER_OWNED_BY_DMA;
++	}
++
++	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
++	/* boundary. We use the memory allocated for Tx descriptor. This memory	 */
++	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
++	if (p_pkt_info->byte_cnt <= 8) {
++		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
++		return ETH_ERROR;
++
++		p_tx_desc_curr->buf_ptr =
++			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
++		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
++			    p_pkt_info->byte_cnt);
++	} else
++		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
++
++	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
++	p_tx_desc_curr->return_info = p_pkt_info->return_info;
++
++	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
++		/* Set last desc with DMA ownership and interrupt enable. */
++		p_tx_desc_curr->cmd_sts = command_status |
++			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
++
++		if (p_tx_desc_curr != p_tx_desc_first)
++			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
++
++		/* Flush CPU pipe */
++
++		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
++		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
++		CPU_PIPE_FLUSH;
++
++		/* Apply send command */
++		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
++
++		/* Finish Tx packet. Update first desc in case of Tx resource error */
++		p_tx_desc_first = p_tx_next_desc_curr;
++		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
++
++	} else {
++		p_tx_desc_curr->cmd_sts = command_status;
++		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
++	}
++
++	/* Check for ring index overlap in the Tx desc ring */
++	if (p_tx_next_desc_curr == p_tx_desc_used) {
++		/* Update the current descriptor */
++		CURR_TFD_SET (p_tx_desc_first, tx_queue);
++
++		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
++		return ETH_QUEUE_LAST_RESOURCE;
++	} else {
++		/* Update the current descriptor */
++		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
++		return ETH_OK;
++	}
++}
++
++/*******************************************************************************
++ * eth_tx_return_desc - Free all used Tx descriptors
++ *
++ * DESCRIPTION:
++ *	This routine returns the transmitted packet information to the caller.
++ *	It uses the 'first' index to support Tx desc return in case a transmit
++ *	of a packet spanned over multiple buffer still in process.
++ *	In case the Tx queue was in "resource error" condition, where there are
++ *	no available Tx resources, the function resets the resource error flag.
++ *
++ * INPUT:
++ *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
++ *	ETH_QUEUE	tx_queue	 Number of Tx queue.
++ *	PKT_INFO	*p_pkt_info	  User packet buffer.
++ *
++ * OUTPUT:
++ *	Tx ring 'first' and 'used' indexes are updated.
++ *
++ * RETURN:
++ *	ETH_ERROR in case the routine can not access Tx desc ring.
++ *	ETH_RETRY in case there is transmission in process.
++ *	ETH_END_OF_JOB if the routine has nothing to release.
++ *	ETH_OK otherwise.
++ *
++ *******************************************************************************/
++static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
++					       p_eth_port_ctrl,
++					       ETH_QUEUE tx_queue,
++					       PKT_INFO * p_pkt_info)
++{
++	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
++	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
++	unsigned int command_status;
++
++	/* Get the Tx Desc ring indexes */
++	USED_TFD_GET (p_tx_desc_used, tx_queue);
++	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
++
++	/* Sanity check */
++	if (p_tx_desc_used == NULL)
++		return ETH_ERROR;
++
++	command_status = p_tx_desc_used->cmd_sts;
++
++	/* Still transmitting... */
++	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
++		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
++		return ETH_RETRY;
++	}
++
++	/* Stop release. About to overlap the current available Tx descriptor */
++	if ((p_tx_desc_used == p_tx_desc_first) &&
++	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
++		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
++		return ETH_END_OF_JOB;
++	}
++
++	/* Pass the packet information to the caller */
++	p_pkt_info->cmd_sts = command_status;
++	p_pkt_info->return_info = p_tx_desc_used->return_info;
++	p_tx_desc_used->return_info = 0;
++
++	/* Update the next descriptor to release. */
++	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
++
++	/* Any Tx return cancels the Tx resource error status */
++	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
++		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
++
++	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
++
++	return ETH_OK;
++
++}
++
++/*******************************************************************************
++ * eth_port_receive - Get received information from Rx ring.
++ *
++ * DESCRIPTION:
++ *	This routine returns the received data to the caller. There is no
++ *	data copying during routine operation. All information is returned
++ *	using pointer to packet information struct passed from the caller.
++ *	If the routine exhausts Rx ring resources then the resource error flag
++ *	is set.
++ *
++ * INPUT:
++ *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
++ *	ETH_QUEUE	rx_queue	 Number of Rx queue.
++ *	PKT_INFO	*p_pkt_info	  User packet buffer.
++ *
++ * OUTPUT:
++ *	Rx ring current and used indexes are updated.
++ *
++ * RETURN:
++ *	ETH_ERROR in case the routine can not access Rx desc ring.
++ *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
++ *	ETH_END_OF_JOB if there is no received data.
++ *	ETH_OK otherwise.
++ *
++ *******************************************************************************/
++static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
++					     ETH_QUEUE rx_queue,
++					     PKT_INFO * p_pkt_info)
++{
++	volatile ETH_RX_DESC *p_rx_curr_desc;
++	volatile ETH_RX_DESC *p_rx_next_curr_desc;
++	volatile ETH_RX_DESC *p_rx_used_desc;
++	unsigned int command_status;
++
++	/* Do not process Rx ring in case of Rx ring resource error */
++	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
++		printf ("\nRx Queue is full ...\n");
++		return ETH_QUEUE_FULL;
++	}
++
++	/* Get the Rx Desc ring 'curr and 'used' indexes */
++	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
++	USED_RFD_GET (p_rx_used_desc, rx_queue);
++
++	/* Sanity check */
++	if (p_rx_curr_desc == NULL)
++		return ETH_ERROR;
++
++	/* The following parameters are used to save readings from memory */
++	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
++	command_status = p_rx_curr_desc->cmd_sts;
++
++	/* Nothing to receive... */
++	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
++/*	DP(printf("Rx: command_status: %08x\n", command_status)); */
++		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
++/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
++		return ETH_END_OF_JOB;
++	}
++
++	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
++	p_pkt_info->cmd_sts = command_status;
++	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
++	p_pkt_info->return_info = p_rx_curr_desc->return_info;
++	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */
++
++	/* Clean the return info field to indicate that the packet has been */
++	/* moved to the upper layers					    */
++	p_rx_curr_desc->return_info = 0;
++
++	/* Update 'curr' in data structure */
++	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
++
++	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
++	if (p_rx_next_curr_desc == p_rx_used_desc)
++		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
++
++	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
++	CPU_PIPE_FLUSH;
++
++	return ETH_OK;
++}
++
++/*******************************************************************************
++ * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
++ *
++ * DESCRIPTION:
++ *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
++ *	next 'used' descriptor and attached the returned buffer to it.
++ *	In case the Rx ring was in "resource error" condition, where there are
++ *	no available Rx resources, the function resets the resource error flag.
++ *
++ * INPUT:
++ *	ETH_PORT_INFO	*p_eth_port_ctrl   Ethernet Port Control srtuct.
++ *	ETH_QUEUE	rx_queue	 Number of Rx queue.
++ *	PKT_INFO	*p_pkt_info	  Information on the returned buffer.
++ *
++ * OUTPUT:
++ *	New available Rx resource in Rx descriptor ring.
++ *
++ * RETURN:
++ *	ETH_ERROR in case the routine can not access Rx desc ring.
++ *	ETH_OK otherwise.
++ *
++ *******************************************************************************/
++static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
++					       p_eth_port_ctrl,
++					       ETH_QUEUE rx_queue,
++					       PKT_INFO * p_pkt_info)
++{
++	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
++
++	/* Get 'used' Rx descriptor */
++	USED_RFD_GET (p_used_rx_desc, rx_queue);
++
++	/* Sanity check */
++	if (p_used_rx_desc == NULL)
++		return ETH_ERROR;
++
++	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
++	p_used_rx_desc->return_info = p_pkt_info->return_info;
++	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
++	p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE;	/* Reset Buffer size */
++
++	/* Flush the write pipe */
++	CPU_PIPE_FLUSH;
++
++	/* Return the descriptor to DMA ownership */
++	p_used_rx_desc->cmd_sts =
++		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
++
++	/* Flush descriptor and CPU pipe */
++	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
++	CPU_PIPE_FLUSH;
++
++	/* Move the used descriptor pointer to the next descriptor */
++	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
++
++	/* Any Rx return cancels the Rx resource error status */
++	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
++		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
++
++	return ETH_OK;
++}
++
++/*******************************************************************************
++ * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
++ *
++ * DESCRIPTION:
++ *	This routine sets the RX coalescing interrupt mechanism parameter.
++ *	This parameter is a timeout counter, that counts in 64 t_clk
++ *	chunks ; that when timeout event occurs a maskable interrupt
++ *	occurs.
++ *	The parameter is calculated using the tClk of the MV-643xx chip
++ *	, and the required delay of the interrupt in usec.
++ *
++ * INPUT:
++ *	ETH_PORT eth_port_num	   Ethernet port number
++ *	unsigned int t_clk	  t_clk of the MV-643xx chip in HZ units
++ *	unsigned int delay	 Delay in usec
++ *
++ * OUTPUT:
++ *	Interrupt coalescing mechanism value is set in MV-643xx chip.
++ *
++ * RETURN:
++ *	The interrupt coalescing value set in the gigE port.
++ *
++ *******************************************************************************/
++#if 0				/* FIXME */
++static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
++					  unsigned int t_clk,
++					  unsigned int delay)
++{
++	unsigned int coal;
++
++	coal = ((t_clk / 1000000) * delay) / 64;
++	/* Set RX Coalescing mechanism */
++	MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
++		      ((coal & 0x3fff) << 8) |
++		      (MV_REG_READ
++		       (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num))
++		       & 0xffc000ff));
++	return coal;
++}
++
++#endif
++/*******************************************************************************
++ * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
++ *
++ * DESCRIPTION:
++ *	This routine sets the TX coalescing interrupt mechanism parameter.
++ *	This parameter is a timeout counter, that counts in 64 t_clk
++ *	chunks ; that when timeout event occurs a maskable interrupt
++ *	occurs.
++ *	The parameter is calculated using the t_cLK frequency of the
++ *	MV-643xx chip and the required delay in the interrupt in uSec
++ *
++ * INPUT:
++ *	ETH_PORT eth_port_num	   Ethernet port number
++ *	unsigned int t_clk	  t_clk of the MV-643xx chip in HZ units
++ *	unsigned int delay	 Delay in uSeconds
++ *
++ * OUTPUT:
++ *	Interrupt coalescing mechanism value is set in MV-643xx chip.
++ *
++ * RETURN:
++ *	The interrupt coalescing value set in the gigE port.
++ *
++ *******************************************************************************/
++#if 0				/* FIXME */
++static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
++					  unsigned int t_clk,
++					  unsigned int delay)
++{
++	unsigned int coal;
++
++	coal = ((t_clk / 1000000) * delay) / 64;
++	/* Set TX Coalescing mechanism */
++	MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
++		      coal << 4);
++	return coal;
++}
++#endif
++
++/*******************************************************************************
++ * eth_b_copy - Copy bytes from source to destination
++ *
++ * DESCRIPTION:
++ *	 This function supports the eight bytes limitation on Tx buffer size.
++ *	 The routine will zero eight bytes starting from the destination address
++ *	 followed by copying bytes from the source address to the destination.
++ *
++ * INPUT:
++ *	 unsigned int src_addr	  32 bit source address.
++ *	 unsigned int dst_addr	  32 bit destination address.
++ *	 int	    byte_count	  Number of bytes to copy.
++ *
++ * OUTPUT:
++ *	 See description.
++ *
++ * RETURN:
++ *	 None.
++ *
++ *******************************************************************************/
++static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
++			int byte_count)
++{
++	/* Zero the dst_addr area */
++	*(unsigned int *) dst_addr = 0x0;
++
++	while (byte_count != 0) {
++		*(char *) dst_addr = *(char *) src_addr;
++		dst_addr++;
++		src_addr++;
++		byte_count--;
++	}
++}
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mv_eth.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.h
+--- u-boot-1.1.6/board/prodrive/p3mx/mv_eth.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,840 @@
++/*
++ * (C) Copyright 2003
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * based on - Driver for MV64460X ethernet ports
++ * Copyright (C) 2002 rabeeh@galileo.co.il
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * mv_eth.h - header file for the polled mode GT ethernet driver
++ */
++
++#ifndef __DB64460_ETH_H__
++#define __DB64460_ETH_H__
++
++#include <asm/types.h>
++#include <asm/io.h>
++#include <asm/byteorder.h>
++#include <common.h>
++#include <net.h>
++#include "mv_regs.h"
++#include "ppc_error_no.h"
++#include "../../Marvell/include/core.h"
++
++/*************************************************************************
++**************************************************************************
++**************************************************************************
++*  The first part is the high level driver of the gigE ethernet ports.	 *
++**************************************************************************
++**************************************************************************
++*************************************************************************/
++#ifndef TRUE
++#define TRUE 1
++#endif
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
++#ifndef MAX_SKB_FRAGS
++#define MAX_SKB_FRAGS 0
++#endif
++
++/* Port attributes */
++/*#define MAX_RX_QUEUE_NUM	8*/
++/*#define MAX_TX_QUEUE_NUM	8*/
++#define MAX_RX_QUEUE_NUM	1
++#define MAX_TX_QUEUE_NUM	1
++
++
++/* Use one TX queue and one RX queue */
++#define MV64460_TX_QUEUE_NUM 1
++#define MV64460_RX_QUEUE_NUM 1
++
++/*
++ * Number of RX / TX descriptors on RX / TX rings.
++ * Note that allocating RX descriptors is done by allocating the RX
++ * ring AND a preallocated RX buffers (skb's) for each descriptor.
++ * The TX descriptors only allocates the TX descriptors ring,
++ * with no pre allocated TX buffers (skb's are allocated by higher layers.
++ */
++
++/* Default TX ring size is 10 descriptors */
++#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE
++#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE
++#else
++#define MV64460_TX_QUEUE_SIZE 4
++#endif
++
++/* Default RX ring size is 4 descriptors */
++#ifdef	CONFIG_MV64460_ETH_RXQUEUE_SIZE
++#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE
++#else
++#define MV64460_RX_QUEUE_SIZE 4
++#endif
++
++#ifdef CONFIG_RX_BUFFER_SIZE
++#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
++#else
++#define MV64460_RX_BUFFER_SIZE 1600
++#endif
++
++#ifdef CONFIG_TX_BUFFER_SIZE
++#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
++#else
++#define MV64460_TX_BUFFER_SIZE 1600
++#endif
++
++/*
++ *	Network device statistics. Akin to the 2.0 ether stats but
++ *	with byte counters.
++ */
++
++struct net_device_stats
++{
++	unsigned long	rx_packets;		/* total packets received	*/
++	unsigned long	tx_packets;		/* total packets transmitted	*/
++	unsigned long	rx_bytes;		/* total bytes received		*/
++	unsigned long	tx_bytes;		/* total bytes transmitted	*/
++	unsigned long	rx_errors;		/* bad packets received		*/
++	unsigned long	tx_errors;		/* packet transmit problems	*/
++	unsigned long	rx_dropped;		/* no space in linux buffers	*/
++	unsigned long	tx_dropped;		/* no space available in linux	*/
++	unsigned long	multicast;		/* multicast packets received	*/
++	unsigned long	collisions;
++
++	/* detailed rx_errors: */
++	unsigned long	rx_length_errors;
++	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
++	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
++	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
++	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
++	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
++
++	/* detailed tx_errors */
++	unsigned long	tx_aborted_errors;
++	unsigned long	tx_carrier_errors;
++	unsigned long	tx_fifo_errors;
++	unsigned long	tx_heartbeat_errors;
++	unsigned long	tx_window_errors;
++
++	/* for cslip etc */
++	unsigned long	rx_compressed;
++	unsigned long	tx_compressed;
++};
++
++
++/* Private data structure used for ethernet device */
++struct mv64460_eth_priv {
++    unsigned int port_num;
++    struct net_device_stats *stats;
++
++    /* to buffer area aligned */
++    char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
++    char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
++
++    /* Size of Tx Ring per queue */
++    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
++
++    /* Size of Rx Ring per queue */
++    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
++
++    /* Magic Number for Ethernet running */
++    unsigned int eth_running;
++
++    int first_init;
++};
++
++int mv64460_eth_init (struct eth_device *dev);
++int mv64460_eth_stop (struct eth_device *dev);
++int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
++/*	return db64460_eth0_poll(); */
++
++int mv64460_eth_open (struct eth_device *dev);
++
++
++/*************************************************************************
++**************************************************************************
++**************************************************************************
++*  The second part is the low level driver of the gigE ethernet ports.	 *
++**************************************************************************
++**************************************************************************
++*************************************************************************/
++
++
++/********************************************************************************
++ * Header File for : MV-643xx network interface header
++ *
++ * DESCRIPTION:
++ *	 This header file contains macros typedefs and function declaration for
++ *	 the Marvell Gig Bit Ethernet Controller.
++ *
++ * DEPENDENCIES:
++ *	 None.
++ *
++ *******************************************************************************/
++
++
++#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
++#ifdef CONFIG_MV64460_SRAM_CACHEABLE
++/* In case SRAM is cacheable but not cache coherent */
++#define D_CACHE_FLUSH_LINE(addr, offset)       \
++{		    \
++  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
++}
++#else
++/* In case SRAM is cache coherent or non-cacheable */
++#define D_CACHE_FLUSH_LINE(addr, offset) ;
++#endif
++#else
++#ifdef CONFIG_NOT_COHERENT_CACHE
++/* In case of descriptors on DDR but not cache coherent */
++#define D_CACHE_FLUSH_LINE(addr, offset)       \
++{		    \
++  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
++}
++#else
++/* In case of descriptors on DDR and cache coherent */
++#define D_CACHE_FLUSH_LINE(addr, offset) ;
++#endif /* CONFIG_NOT_COHERENT_CACHE */
++#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
++
++
++#define CPU_PIPE_FLUSH		   \
++{		  \
++  __asm__ __volatile__ ("eieio");	  \
++}
++
++
++/* defines  */
++
++/* Default port configuration value */
++#define PORT_CONFIG_VALUE			\
++	     ETH_UNICAST_NORMAL_MODE		|   \
++	     ETH_DEFAULT_RX_QUEUE_0		|   \
++	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
++	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
++	     ETH_RECEIVE_BC_IF_IP		|   \
++	     ETH_RECEIVE_BC_IF_ARP		|   \
++	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
++	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
++	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
++	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
++	     ETH_DEFAULT_RX_BPDU_QUEUE_0
++
++/* Default port extend configuration value */
++#define PORT_CONFIG_EXTEND_VALUE		\
++	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
++	     ETH_PARTITION_DISABLE
++
++
++/* Default sdma control value */
++#ifdef CONFIG_NOT_COHERENT_CACHE
++#define PORT_SDMA_CONFIG_VALUE				\
++			 ETH_RX_BURST_SIZE_16_64BIT	|	\
++			 GT_ETH_IPG_INT_RX(0)			|	\
++			 ETH_TX_BURST_SIZE_16_64BIT;
++#else
++#define PORT_SDMA_CONFIG_VALUE			\
++			 ETH_RX_BURST_SIZE_4_64BIT	|	\
++			 GT_ETH_IPG_INT_RX(0)			|	\
++			 ETH_TX_BURST_SIZE_4_64BIT;
++#endif
++
++#define GT_ETH_IPG_INT_RX(value)		\
++	    ((value & 0x3fff) << 8)
++
++/* Default port serial control value */
++#define PORT_SERIAL_CONTROL_VALUE			    \
++			ETH_FORCE_LINK_PASS			|	\
++			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
++			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
++			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
++			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
++			ETH_FORCE_BP_MODE_NO_JAM		|	\
++			BIT9					|	\
++			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
++			ETH_RETRANSMIT_16_ETTEMPTS		|	\
++			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
++			ETH_DTE_ADV_0				|	\
++			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
++			ETH_AUTO_NEG_NO_CHANGE			|	\
++			ETH_MAX_RX_PACKET_1552BYTE		|	\
++			ETH_CLR_EXT_LOOPBACK			|	\
++			ETH_SET_FULL_DUPLEX_MODE		|	\
++			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
++
++#define RX_BUFFER_MAX_SIZE  0xFFFF
++#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
++
++#define RX_BUFFER_MIN_SIZE  0x8
++#define TX_BUFFER_MIN_SIZE  0x8
++
++/* Tx WRR confoguration macros */
++#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
++#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
++#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
++
++/* MAC accepet/reject macros */
++#define ACCEPT_MAC_ADDR	    0
++#define REJECT_MAC_ADDR	    1
++
++/* Size of a Tx/Rx descriptor used in chain list data structure */
++#define RX_DESC_ALIGNED_SIZE		0x20
++#define TX_DESC_ALIGNED_SIZE		0x20
++
++/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
++#define TX_BUF_OFFSET_IN_DESC	    0x18
++/* Buffer offset from buffer pointer */
++#define RX_BUF_OFFSET				0x2
++
++/* Gap define */
++#define ETH_BAR_GAP					0x8
++#define ETH_SIZE_REG_GAP				0x8
++#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
++#define ETH_PORT_ACCESS_CTRL_GAP			0x4
++
++/* Gigabit Ethernet Unit Global Registers */
++
++/* MIB Counters register definitions */
++#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
++#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
++#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
++#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
++#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
++#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
++#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
++#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
++#define ETH_MIB_FRAMES_64_OCTETS	   0x20
++#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
++#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
++#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
++#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
++#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
++#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
++#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
++#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
++#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
++#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
++#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
++#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
++#define ETH_MIB_FC_SENT			   0x54
++#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
++#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
++#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
++#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
++#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
++#define ETH_MIB_JABBER_RECEIVED		   0x6c
++#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
++#define ETH_MIB_BAD_CRC_EVENT		   0x74
++#define ETH_MIB_COLLISION		   0x78
++#define ETH_MIB_LATE_COLLISION		   0x7c
++
++/* Port serial status reg (PSR) */
++#define ETH_INTERFACE_GMII_MII				0
++#define ETH_INTERFACE_PCM				BIT0
++#define ETH_LINK_IS_DOWN				0
++#define ETH_LINK_IS_UP					BIT1
++#define ETH_PORT_AT_HALF_DUPLEX				0
++#define ETH_PORT_AT_FULL_DUPLEX				BIT2
++#define ETH_RX_FLOW_CTRL_DISABLED			0
++#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
++#define ETH_GMII_SPEED_100_10				0
++#define ETH_GMII_SPEED_1000				BIT4
++#define ETH_MII_SPEED_10				0
++#define ETH_MII_SPEED_100				BIT5
++#define ETH_NO_TX					0
++#define ETH_TX_IN_PROGRESS				BIT7
++#define ETH_BYPASS_NO_ACTIVE				0
++#define ETH_BYPASS_ACTIVE				BIT8
++#define ETH_PORT_NOT_AT_PARTITION_STATE			0
++#define ETH_PORT_AT_PARTITION_STATE			BIT9
++#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
++#define ETH_PORT_TX_FIFO_EMPTY				BIT10
++
++
++/* These macros describes the Port configuration reg (Px_cR) bits */
++#define ETH_UNICAST_NORMAL_MODE				0
++#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
++#define ETH_DEFAULT_RX_QUEUE_0				0
++#define ETH_DEFAULT_RX_QUEUE_1				BIT1
++#define ETH_DEFAULT_RX_QUEUE_2				BIT2
++#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
++#define ETH_DEFAULT_RX_QUEUE_4				BIT3
++#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
++#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
++#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
++#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
++#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
++#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
++#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
++#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
++#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
++#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
++#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
++#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
++#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
++#define ETH_RECEIVE_BC_IF_IP				0
++#define ETH_REJECT_BC_IF_IP				BIT8
++#define ETH_RECEIVE_BC_IF_ARP				0
++#define ETH_REJECT_BC_IF_ARP				BIT9
++#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
++#define ETH_CAPTURE_TCP_FRAMES_DIS			0
++#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
++#define ETH_CAPTURE_UDP_FRAMES_DIS			0
++#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
++#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
++#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
++#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
++#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
++#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
++#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
++#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
++#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
++#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
++#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
++#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
++#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
++#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
++#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
++#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
++#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
++#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
++#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
++#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
++#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
++#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
++#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
++#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
++#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
++
++
++/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
++#define ETH_CLASSIFY_EN					BIT0
++#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
++#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
++#define ETH_PARTITION_DISABLE				0
++#define ETH_PARTITION_ENABLE				BIT2
++
++
++/* Tx/Rx queue command reg (RQCR/TQCR)*/
++#define ETH_QUEUE_0_ENABLE				BIT0
++#define ETH_QUEUE_1_ENABLE				BIT1
++#define ETH_QUEUE_2_ENABLE				BIT2
++#define ETH_QUEUE_3_ENABLE				BIT3
++#define ETH_QUEUE_4_ENABLE				BIT4
++#define ETH_QUEUE_5_ENABLE				BIT5
++#define ETH_QUEUE_6_ENABLE				BIT6
++#define ETH_QUEUE_7_ENABLE				BIT7
++#define ETH_QUEUE_0_DISABLE				BIT8
++#define ETH_QUEUE_1_DISABLE				BIT9
++#define ETH_QUEUE_2_DISABLE				BIT10
++#define ETH_QUEUE_3_DISABLE				BIT11
++#define ETH_QUEUE_4_DISABLE				BIT12
++#define ETH_QUEUE_5_DISABLE				BIT13
++#define ETH_QUEUE_6_DISABLE				BIT14
++#define ETH_QUEUE_7_DISABLE				BIT15
++
++/* These macros describes the Port Sdma configuration reg (SDCR) bits */
++#define ETH_RIFB					BIT0
++#define ETH_RX_BURST_SIZE_1_64BIT			0
++#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
++#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
++#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
++#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
++#define ETH_BLM_RX_NO_SWAP				BIT4
++#define ETH_BLM_RX_BYTE_SWAP				0
++#define ETH_BLM_TX_NO_SWAP				BIT5
++#define ETH_BLM_TX_BYTE_SWAP				0
++#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
++#define ETH_DESCRIPTORS_NO_SWAP				0
++#define ETH_TX_BURST_SIZE_1_64BIT			0
++#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
++#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
++#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
++#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
++
++/* These macros describes the Port serial control reg (PSCR) bits */
++#define ETH_SERIAL_PORT_DISABLE				0
++#define ETH_SERIAL_PORT_ENABLE				BIT0
++#define ETH_FORCE_LINK_PASS				BIT1
++#define ETH_DO_NOT_FORCE_LINK_PASS			0
++#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
++#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
++#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
++#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
++#define ETH_ADV_NO_FLOW_CTRL				0
++#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
++#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
++#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
++#define ETH_FORCE_BP_MODE_NO_JAM			0
++#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
++#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
++#define ETH_FORCE_LINK_FAIL				0
++#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
++#define ETH_RETRANSMIT_16_ETTEMPTS			0
++#define ETH_RETRANSMIT_FOREVER				BIT11
++#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
++#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
++#define ETH_DTE_ADV_0					0
++#define ETH_DTE_ADV_1					BIT14
++#define ETH_DISABLE_AUTO_NEG_BYPASS			0
++#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
++#define ETH_AUTO_NEG_NO_CHANGE				0
++#define ETH_RESTART_AUTO_NEG				BIT16
++#define ETH_MAX_RX_PACKET_1518BYTE			0
++#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
++#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
++#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
++#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
++#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
++#define ETH_SET_EXT_LOOPBACK				BIT20
++#define ETH_CLR_EXT_LOOPBACK				0
++#define ETH_SET_FULL_DUPLEX_MODE			BIT21
++#define ETH_SET_HALF_DUPLEX_MODE			0
++#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
++#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
++#define ETH_SET_GMII_SPEED_TO_10_100			0
++#define ETH_SET_GMII_SPEED_TO_1000			BIT23
++#define ETH_SET_MII_SPEED_TO_10				0
++#define ETH_SET_MII_SPEED_TO_100			BIT24
++
++
++/* SMI reg */
++#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
++#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
++#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
++#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
++
++/* SDMA command status fields macros */
++
++/* Tx & Rx descriptors status */
++#define ETH_ERROR_SUMMARY		    (BIT0)
++
++/* Tx & Rx descriptors command */
++#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
++
++/* Tx descriptors status */
++#define ETH_LC_ERROR			    (0	  )
++#define ETH_UR_ERROR			    (BIT1 )
++#define ETH_RL_ERROR			    (BIT2 )
++#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
++
++/* Rx descriptors status */
++#define ETH_CRC_ERROR			    (0	  )
++#define ETH_OVERRUN_ERROR		    (BIT1 )
++#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
++#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
++#define ETH_VLAN_TAGGED			    (BIT19)
++#define ETH_BPDU_FRAME			    (BIT20)
++#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
++#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
++#define ETH_OTHER_FRAME_TYPE		    (BIT22)
++#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
++#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
++#define ETH_FRAME_HEADER_OK		    (BIT25)
++#define ETH_RX_LAST_DESC		    (BIT26)
++#define ETH_RX_FIRST_DESC		    (BIT27)
++#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
++#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
++#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
++
++/* Rx descriptors byte count */
++#define ETH_FRAME_FRAGMENTED		    (BIT2)
++
++/* Tx descriptors command */
++#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
++#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
++#define ETH_TCP_FRAME			    (0	  )
++#define ETH_UDP_FRAME			    (BIT16)
++#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
++#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
++#define ETH_ZERO_PADDING		    (BIT19)
++#define ETH_TX_LAST_DESC		    (BIT20)
++#define ETH_TX_FIRST_DESC		    (BIT21)
++#define ETH_GEN_CRC			    (BIT22)
++#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
++#define ETH_AUTO_MODE			    (BIT30)
++
++/* Address decode parameters */
++/* Ethernet Base Address Register bits */
++#define EBAR_TARGET_DRAM					0x00000000
++#define EBAR_TARGET_DEVICE					0x00000001
++#define EBAR_TARGET_CBS						0x00000002
++#define EBAR_TARGET_PCI0					0x00000003
++#define EBAR_TARGET_PCI1					0x00000004
++#define EBAR_TARGET_CUNIT					0x00000005
++#define EBAR_TARGET_AUNIT					0x00000006
++#define EBAR_TARGET_GUNIT					0x00000007
++
++/* Window attributes */
++#define EBAR_ATTR_DRAM_CS0					0x00000E00
++#define EBAR_ATTR_DRAM_CS1					0x00000D00
++#define EBAR_ATTR_DRAM_CS2					0x00000B00
++#define EBAR_ATTR_DRAM_CS3					0x00000700
++
++/* DRAM Target interface */
++#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
++#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
++#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
++
++/* Device Bus Target interface */
++#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
++#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
++#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
++#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
++#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
++
++/* PCI Target interface */
++#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
++#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
++#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
++#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
++#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
++#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
++#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
++#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
++#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
++#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
++
++/* CPU 60x bus or internal SRAM interface */
++#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
++#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
++#define EBAR_ATTR_CBS_SRAM					0x00000000
++#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
++
++/* Window access control */
++#define EWIN_ACCESS_NOT_ALLOWED 0
++#define EWIN_ACCESS_READ_ONLY	BIT0
++#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
++#define EWIN0_ACCESS_MASK		0x0003
++#define EWIN1_ACCESS_MASK		0x000C
++#define EWIN2_ACCESS_MASK		0x0030
++#define EWIN3_ACCESS_MASK		0x00C0
++
++/* typedefs */
++
++typedef enum _eth_port
++{
++    ETH_0 = 0,
++	ETH_1 = 1,
++	ETH_2 = 2
++}ETH_PORT;
++
++typedef enum _eth_func_ret_status
++{
++    ETH_OK,			/* Returned as expected.		    */
++    ETH_ERROR,			/* Fundamental error.			    */
++    ETH_RETRY,			/* Could not process request. Try later.    */
++    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
++    ETH_QUEUE_FULL,		/* Ring resource error.			    */
++    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
++}ETH_FUNC_RET_STATUS;
++
++typedef enum _eth_queue
++{
++	ETH_Q0 = 0,
++	ETH_Q1 = 1,
++	ETH_Q2 = 2,
++	ETH_Q3 = 3,
++	ETH_Q4 = 4,
++	ETH_Q5 = 5,
++	ETH_Q6 = 6,
++    ETH_Q7 = 7
++} ETH_QUEUE;
++
++typedef enum _addr_win
++{
++	ETH_WIN0,
++	ETH_WIN1,
++	ETH_WIN2,
++	ETH_WIN3,
++	ETH_WIN4,
++    ETH_WIN5
++} ETH_ADDR_WIN;
++
++typedef enum _eth_target
++{
++	ETH_TARGET_DRAM	 ,
++	ETH_TARGET_DEVICE,
++	ETH_TARGET_CBS	 ,
++	ETH_TARGET_PCI0	 ,
++	ETH_TARGET_PCI1
++}ETH_TARGET;
++
++typedef struct _eth_rx_desc
++{
++	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
++	unsigned short	buf_size	   ;	/* Buffer size			    */
++	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
++	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
++	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
++    unsigned int    return_info ;    /* User resource return information */
++} ETH_RX_DESC;
++
++
++typedef struct _eth_tx_desc
++{
++    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
++    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
++    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
++    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
++    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
++    unsigned int    return_info ;    /* User resource return information */
++} ETH_TX_DESC;
++
++/* Unified struct for Rx and Tx operations. The user is not required to */
++/* be familier with neither Tx nor Rx descriptors.			 */
++typedef struct _pkt_info
++{
++	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
++	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
++	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
++	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
++    unsigned int    return_info ;    /* User resource return information */
++} PKT_INFO;
++
++
++typedef struct _eth_win_param
++{
++    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
++    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
++    unsigned short attributes;	/* BAR attributes. See above macros. */
++    unsigned int base_addr; /* Window base address in unsigned int form */
++    unsigned int high_addr; /* Window high address in unsigned int form */
++    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
++    bool enable; /* Enable/disable access to the window. */
++    unsigned short access_ctrl; /* Access ctrl register. see above macros */
++} ETH_WIN_PARAM;
++
++
++/* Ethernet port specific infomation */
++
++typedef struct _eth_port_ctrl
++{
++    ETH_PORT  port_num; /* User Ethernet port number */
++    int port_phy_addr;	/* User phy address of Ethrnet port */
++    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
++    unsigned int  port_config; /* User port configuration value */
++    unsigned int  port_config_extend; /* User port config extend value */
++    unsigned int  port_sdma_config; /* User port SDMA config value */
++    unsigned int  port_serial_control; /* User port serial control value */
++    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
++    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
++
++    /* User function to cast virtual address to CPU bus address */
++    unsigned int  (*port_virt_to_phys)(unsigned int addr);
++    /* User scratch pad for user specific data structures */
++    void *port_private;
++
++    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
++    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
++
++    /* Tx/Rx rings managment indexes fields. For driver use */
++
++    /* Next available Rx resource */
++    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
++    /* Returning Rx resource */
++    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
++
++    /* Next available Tx resource */
++    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
++    /* Returning Tx resource */
++    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
++    /* An extra Tx index to support transmit of multiple buffers per packet */
++    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
++
++    /* Tx/Rx rings size and base variables fields. For driver use */
++
++    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
++    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
++    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
++
++    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
++    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
++    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
++
++} ETH_PORT_INFO;
++
++
++/* ethernet.h API list */
++
++/* Port operation control routines */
++static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
++static void eth_port_reset(ETH_PORT	eth_port_num);
++static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
++
++
++/* Port MAC address routines */
++static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
++				  unsigned char *p_addr,
++				  ETH_QUEUE queue);
++#if 0	/* FIXME */
++static void eth_port_mc_addr	(ETH_PORT eth_port_num,
++				 unsigned char *p_addr,
++				 ETH_QUEUE queue,
++				 int option);
++#endif
++
++/* PHY and MIB routines */
++static bool ethernet_phy_reset(ETH_PORT eth_port_num);
++
++static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
++				   unsigned int phy_reg,
++				   unsigned int value);
++
++static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
++				  unsigned int phy_reg,
++				  unsigned int* value);
++
++static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
++
++/* Port data flow control routines */
++static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
++					     ETH_QUEUE tx_queue,
++					     PKT_INFO *p_pkt_info);
++static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
++					      ETH_QUEUE tx_queue,
++					      PKT_INFO *p_pkt_info);
++static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
++					     ETH_QUEUE rx_queue,
++					     PKT_INFO *p_pkt_info);
++static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
++					      ETH_QUEUE rx_queue,
++					      PKT_INFO *p_pkt_info);
++
++
++static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
++				    ETH_QUEUE	tx_queue,
++				    int				tx_desc_num,
++				    int				tx_buff_size,
++				    unsigned int	tx_desc_base_addr,
++				    unsigned int	tx_buff_base_addr);
++
++static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
++				    ETH_QUEUE	rx_queue,
++				    int				rx_desc_num,
++				    int				rx_buff_size,
++				    unsigned int	rx_desc_base_addr,
++				    unsigned int	rx_buff_base_addr);
++
++#endif /* MV64460_ETH_ */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mv_regs.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_regs.h
+--- u-boot-1.1.6/board/prodrive/p3mx/mv_regs.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_regs.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,1125 @@
++/*
++ * (C) Copyright 2003
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * based on - Driver for MV64460X ethernet ports
++ * Copyright (C) 2002 rabeeh@galileo.co.il
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/********************************************************************************
++* gt64460r.h - GT-64460 Internal registers definition file.
++*
++* DESCRIPTION:
++*	None.
++*
++* DEPENDENCIES:
++*	None.
++*
++*******************************************************************************/
++
++#ifndef __INCmv_regsh
++#define __INCmv_regsh
++
++#define MV64460
++
++/* Supported by the Atlantis */
++#define MV64460_INCLUDE_PCI_1
++#define MV64460_INCLUDE_PCI_0_ARBITER
++#define MV64460_INCLUDE_PCI_1_ARBITER
++#define MV64460_INCLUDE_SNOOP_SUPPORT
++#define MV64460_INCLUDE_P2P
++#define MV64460_INCLUDE_ETH_PORT_2
++#define MV64460_INCLUDE_CPU_MAPPING
++#define MV64460_INCLUDE_MPSC
++
++/* Not supported features */
++#undef	INCLUDE_CNTMR_4_7
++#undef	INCLUDE_DMA_4_7
++
++/****************************************/
++/* Processor Address Space		*/
++/****************************************/
++
++/* DDR SDRAM BAR and size registers */
++
++#define MV64460_CS_0_BASE_ADDR					    0x008
++#define MV64460_CS_0_SIZE					    0x010
++#define MV64460_CS_1_BASE_ADDR					    0x208
++#define MV64460_CS_1_SIZE					    0x210
++#define MV64460_CS_2_BASE_ADDR					    0x018
++#define MV64460_CS_2_SIZE					    0x020
++#define MV64460_CS_3_BASE_ADDR					    0x218
++#define MV64460_CS_3_SIZE					    0x220
++
++/* Devices BAR and size registers */
++
++#define MV64460_DEV_CS0_BASE_ADDR				    0x028
++#define MV64460_DEV_CS0_SIZE					    0x030
++#define MV64460_DEV_CS1_BASE_ADDR				    0x228
++#define MV64460_DEV_CS1_SIZE					    0x230
++#define MV64460_DEV_CS2_BASE_ADDR				    0x248
++#define MV64460_DEV_CS2_SIZE					    0x250
++#define MV64460_DEV_CS3_BASE_ADDR				    0x038
++#define MV64460_DEV_CS3_SIZE					    0x040
++#define MV64460_BOOTCS_BASE_ADDR				    0x238
++#define MV64460_BOOTCS_SIZE					    0x240
++
++/* PCI 0 BAR and size registers */
++
++#define MV64460_PCI_0_IO_BASE_ADDR				    0x048
++#define MV64460_PCI_0_IO_SIZE					    0x050
++#define MV64460_PCI_0_MEMORY0_BASE_ADDR				    0x058
++#define MV64460_PCI_0_MEMORY0_SIZE				    0x060
++#define MV64460_PCI_0_MEMORY1_BASE_ADDR				    0x080
++#define MV64460_PCI_0_MEMORY1_SIZE				    0x088
++#define MV64460_PCI_0_MEMORY2_BASE_ADDR				    0x258
++#define MV64460_PCI_0_MEMORY2_SIZE				    0x260
++#define MV64460_PCI_0_MEMORY3_BASE_ADDR				    0x280
++#define MV64460_PCI_0_MEMORY3_SIZE				    0x288
++
++/* PCI 1 BAR and size registers */
++#define MV64460_PCI_1_IO_BASE_ADDR				    0x090
++#define MV64460_PCI_1_IO_SIZE					    0x098
++#define MV64460_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
++#define MV64460_PCI_1_MEMORY0_SIZE				    0x0a8
++#define MV64460_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
++#define MV64460_PCI_1_MEMORY1_SIZE				    0x0b8
++#define MV64460_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
++#define MV64460_PCI_1_MEMORY2_SIZE				    0x2a8
++#define MV64460_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
++#define MV64460_PCI_1_MEMORY3_SIZE				    0x2b8
++
++/* SRAM base address */
++#define MV64460_INTEGRATED_SRAM_BASE_ADDR			    0x268
++
++/* internal registers space base address */
++#define MV64460_INTERNAL_SPACE_BASE_ADDR			    0x068
++
++/* Enables the CS , DEV_CS , PCI 0 and PCI 1
++   windows above */
++#define MV64460_BASE_ADDR_ENABLE				    0x278
++
++/****************************************/
++/* PCI remap registers			*/
++/****************************************/
++      /* PCI 0 */
++#define MV64460_PCI_0_IO_ADDR_REMAP				    0x0f0
++#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
++#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
++#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
++#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
++#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
++#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
++#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
++#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
++      /* PCI 1 */
++#define MV64460_PCI_1_IO_ADDR_REMAP				    0x108
++#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
++#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
++#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
++#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
++#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
++#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
++#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
++#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
++
++#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
++#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
++#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
++#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
++#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
++#define MV64460_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
++#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
++#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
++
++/****************************************/
++/*	   CPU Control Registers	*/
++/****************************************/
++
++#define MV64460_CPU_CONFIG					    0x000
++#define MV64460_CPU_MODE					    0x120
++#define MV64460_CPU_MASTER_CONTROL				    0x160
++#define MV64460_CPU_CROSS_BAR_CONTROL_LOW			    0x150
++#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
++#define MV64460_CPU_CROSS_BAR_TIMEOUT				    0x168
++
++/****************************************/
++/* SMP RegisterS			*/
++/****************************************/
++
++#define MV64460_SMP_WHO_AM_I					    0x200
++#define MV64460_SMP_CPU0_DOORBELL				    0x214
++#define MV64460_SMP_CPU0_DOORBELL_CLEAR				    0x21C
++#define MV64460_SMP_CPU1_DOORBELL				    0x224
++#define MV64460_SMP_CPU1_DOORBELL_CLEAR				    0x22C
++#define MV64460_SMP_CPU0_DOORBELL_MASK				    0x234
++#define MV64460_SMP_CPU1_DOORBELL_MASK				    0x23C
++#define MV64460_SMP_SEMAPHOR0					    0x244
++#define MV64460_SMP_SEMAPHOR1					    0x24c
++#define MV64460_SMP_SEMAPHOR2					    0x254
++#define MV64460_SMP_SEMAPHOR3					    0x25c
++#define MV64460_SMP_SEMAPHOR4					    0x264
++#define MV64460_SMP_SEMAPHOR5					    0x26c
++#define MV64460_SMP_SEMAPHOR6					    0x274
++#define MV64460_SMP_SEMAPHOR7					    0x27c
++
++/****************************************/
++/*  CPU Sync Barrier Register		*/
++/****************************************/
++
++#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
++#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
++#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
++#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
++
++/****************************************/
++/* CPU Access Protect			*/
++/****************************************/
++
++#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
++#define MV64460_CPU_PROTECT_WINDOW_0_SIZE			    0x188
++#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
++#define MV64460_CPU_PROTECT_WINDOW_1_SIZE			    0x198
++#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
++#define MV64460_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
++#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
++#define MV64460_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
++
++
++/****************************************/
++/*	    CPU Error Report		*/
++/****************************************/
++
++#define MV64460_CPU_ERROR_ADDR_LOW				    0x070
++#define MV64460_CPU_ERROR_ADDR_HIGH				    0x078
++#define MV64460_CPU_ERROR_DATA_LOW				    0x128
++#define MV64460_CPU_ERROR_DATA_HIGH				    0x130
++#define MV64460_CPU_ERROR_PARITY				    0x138
++#define MV64460_CPU_ERROR_CAUSE					    0x140
++#define MV64460_CPU_ERROR_MASK					    0x148
++
++/****************************************/
++/*	CPU Interface Debug Registers	*/
++/****************************************/
++
++#define MV64460_PUNIT_SLAVE_DEBUG_LOW				    0x360
++#define MV64460_PUNIT_SLAVE_DEBUG_HIGH				    0x368
++#define MV64460_PUNIT_MASTER_DEBUG_LOW				    0x370
++#define MV64460_PUNIT_MASTER_DEBUG_HIGH				    0x378
++#define MV64460_PUNIT_MMASK					    0x3e4
++
++/****************************************/
++/*  Integrated SRAM Registers		*/
++/****************************************/
++
++#define MV64460_SRAM_CONFIG					    0x380
++#define MV64460_SRAM_TEST_MODE					    0X3F4
++#define MV64460_SRAM_ERROR_CAUSE				    0x388
++#define MV64460_SRAM_ERROR_ADDR					    0x390
++#define MV64460_SRAM_ERROR_ADDR_HIGH				    0X3F8
++#define MV64460_SRAM_ERROR_DATA_LOW				    0x398
++#define MV64460_SRAM_ERROR_DATA_HIGH				    0x3a0
++#define MV64460_SRAM_ERROR_DATA_PARITY				    0x3a8
++
++/****************************************/
++/* SDRAM Configuration			*/
++/****************************************/
++
++#define MV64460_SDRAM_CONFIG					    0x1400
++#define MV64460_D_UNIT_CONTROL_LOW				    0x1404
++#define MV64460_D_UNIT_CONTROL_HIGH				    0x1424
++#define MV64460_D_UNIT_MMASK					    0x14B0
++#define MV64460_SDRAM_TIMING_CONTROL_LOW			    0x1408
++#define MV64460_SDRAM_TIMING_CONTROL_HIGH			    0x140c
++#define MV64460_SDRAM_ADDR_CONTROL				    0x1410
++#define MV64460_SDRAM_OPEN_PAGES_CONTROL			    0x1414
++#define MV64460_SDRAM_OPERATION					    0x1418
++#define MV64460_SDRAM_MODE					    0x141c
++#define MV64460_EXTENDED_DRAM_MODE				    0x1420
++#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
++#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
++#define MV64460_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
++#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
++#define MV64460_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
++
++/****************************************/
++/* SDRAM Error Report			*/
++/****************************************/
++
++#define MV64460_SDRAM_ERROR_DATA_LOW				    0x1444
++#define MV64460_SDRAM_ERROR_DATA_HIGH				    0x1440
++#define MV64460_SDRAM_ERROR_ADDR				    0x1450
++#define MV64460_SDRAM_RECEIVED_ECC				    0x1448
++#define MV64460_SDRAM_CALCULATED_ECC				    0x144c
++#define MV64460_SDRAM_ECC_CONTROL				    0x1454
++#define MV64460_SDRAM_ECC_ERROR_COUNTER				    0x1458
++
++/******************************************/
++/*  Controlled Delay Line (CDL) Registers */
++/******************************************/
++
++#define MV64460_DFCDL_CONFIG0					    0x1480
++#define MV64460_DFCDL_CONFIG1					    0x1484
++#define MV64460_DLL_WRITE					    0x1488
++#define MV64460_DLL_READ					    0x148c
++#define MV64460_SRAM_ADDR					    0x1490
++#define MV64460_SRAM_DATA0					    0x1494
++#define MV64460_SRAM_DATA1					    0x1498
++#define MV64460_SRAM_DATA2					    0x149c
++#define MV64460_DFCL_PROBE					    0x14a0
++
++/******************************************/
++/*   Debug Registers			  */
++/******************************************/
++
++#define MV64460_DUNIT_DEBUG_LOW					    0x1460
++#define MV64460_DUNIT_DEBUG_HIGH				    0x1464
++#define MV64460_DUNIT_MMASK					    0X1b40
++
++/****************************************/
++/* Device Parameters			*/
++/****************************************/
++
++#define MV64460_DEVICE_BANK0_PARAMETERS				    0x45c
++#define MV64460_DEVICE_BANK1_PARAMETERS				    0x460
++#define MV64460_DEVICE_BANK2_PARAMETERS				    0x464
++#define MV64460_DEVICE_BANK3_PARAMETERS				    0x468
++#define MV64460_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
++#define MV64460_DEVICE_INTERFACE_CONTROL			    0x4c0
++#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
++#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
++#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
++
++/****************************************/
++/* Device interrupt registers		*/
++/****************************************/
++
++#define MV64460_DEVICE_INTERRUPT_CAUSE				    0x4d0
++#define MV64460_DEVICE_INTERRUPT_MASK				    0x4d4
++#define MV64460_DEVICE_ERROR_ADDR				    0x4d8
++#define MV64460_DEVICE_ERROR_DATA				    0x4dc
++#define MV64460_DEVICE_ERROR_PARITY				    0x4e0
++
++/****************************************/
++/* Device debug registers		*/
++/****************************************/
++
++#define MV64460_DEVICE_DEBUG_LOW				    0x4e4
++#define MV64460_DEVICE_DEBUG_HIGH				    0x4e8
++#define MV64460_RUNIT_MMASK					    0x4f0
++
++/****************************************/
++/* PCI Slave Address Decoding registers */
++/****************************************/
++
++#define MV64460_PCI_0_CS_0_BANK_SIZE				    0xc08
++#define MV64460_PCI_1_CS_0_BANK_SIZE				    0xc88
++#define MV64460_PCI_0_CS_1_BANK_SIZE				    0xd08
++#define MV64460_PCI_1_CS_1_BANK_SIZE				    0xd88
++#define MV64460_PCI_0_CS_2_BANK_SIZE				    0xc0c
++#define MV64460_PCI_1_CS_2_BANK_SIZE				    0xc8c
++#define MV64460_PCI_0_CS_3_BANK_SIZE				    0xd0c
++#define MV64460_PCI_1_CS_3_BANK_SIZE				    0xd8c
++#define MV64460_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
++#define MV64460_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
++#define MV64460_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
++#define MV64460_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
++#define MV64460_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
++#define MV64460_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
++#define MV64460_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
++#define MV64460_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
++#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
++#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
++#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
++#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
++#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
++#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
++#define MV64460_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
++#define MV64460_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
++#define MV64460_PCI_0_CPU_BAR_SIZE				    0xd28
++#define MV64460_PCI_1_CPU_BAR_SIZE				    0xda8
++#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
++#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
++#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
++#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
++#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
++#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
++#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
++#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
++#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
++#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
++#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
++#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
++#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
++#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
++#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
++#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
++#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
++#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
++#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
++#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
++#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
++#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
++#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
++#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
++#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
++#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
++#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
++#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
++#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
++#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
++#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
++#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
++#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
++#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
++#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
++#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
++#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
++#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
++#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
++#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
++#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
++#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
++#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
++#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
++#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
++#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
++#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
++#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
++#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
++#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
++#define MV64460_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
++#define MV64460_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
++#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
++#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
++#define MV64460_PCI_0_HEADERS_RETARGET_BASE			    0xF44
++#define MV64460_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
++#define MV64460_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
++#define MV64460_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
++
++/***********************************/
++/*   PCI Control Register Map	   */
++/***********************************/
++
++#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
++#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
++#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
++#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
++#define MV64460_PCI_0_COMMAND					    0xc00
++#define MV64460_PCI_1_COMMAND					    0xc80
++#define MV64460_PCI_0_MODE					    0xd00
++#define MV64460_PCI_1_MODE					    0xd80
++#define MV64460_PCI_0_RETRY					    0xc04
++#define MV64460_PCI_1_RETRY					    0xc84
++#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
++#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
++#define MV64460_PCI_0_MSI_TRIGGER_TIMER				    0xc38
++#define MV64460_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
++#define MV64460_PCI_0_ARBITER_CONTROL				    0x1d00
++#define MV64460_PCI_1_ARBITER_CONTROL				    0x1d80
++#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
++#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
++#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
++#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
++#define MV64460_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
++#define MV64460_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
++#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
++#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
++#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
++#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
++#define MV64460_PCI_0_P2P_CONFIG				    0x1d14
++#define MV64460_PCI_1_P2P_CONFIG				    0x1d94
++
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
++
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
++
++/****************************************/
++/*   PCI Configuration Access Registers */
++/****************************************/
++
++#define MV64460_PCI_0_CONFIG_ADDR				    0xcf8
++#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
++#define MV64460_PCI_1_CONFIG_ADDR				    0xc78
++#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
++#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
++#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
++
++/****************************************/
++/*   PCI Error Report Registers		*/
++/****************************************/
++
++#define MV64460_PCI_0_SERR_MASK					    0xc28
++#define MV64460_PCI_1_SERR_MASK					    0xca8
++#define MV64460_PCI_0_ERROR_ADDR_LOW				    0x1d40
++#define MV64460_PCI_1_ERROR_ADDR_LOW				    0x1dc0
++#define MV64460_PCI_0_ERROR_ADDR_HIGH				    0x1d44
++#define MV64460_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
++#define MV64460_PCI_0_ERROR_ATTRIBUTE				    0x1d48
++#define MV64460_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
++#define MV64460_PCI_0_ERROR_COMMAND				    0x1d50
++#define MV64460_PCI_1_ERROR_COMMAND				    0x1dd0
++#define MV64460_PCI_0_ERROR_CAUSE				    0x1d58
++#define MV64460_PCI_1_ERROR_CAUSE				    0x1dd8
++#define MV64460_PCI_0_ERROR_MASK				    0x1d5c
++#define MV64460_PCI_1_ERROR_MASK				    0x1ddc
++
++/****************************************/
++/*   PCI Debug Registers		*/
++/****************************************/
++
++#define MV64460_PCI_0_MMASK					    0X1D24
++#define MV64460_PCI_1_MMASK					    0X1DA4
++
++/*********************************************/
++/* PCI Configuration, Function 0, Registers  */
++/*********************************************/
++
++#define MV64460_PCI_DEVICE_AND_VENDOR_ID			    0x000
++#define MV64460_PCI_STATUS_AND_COMMAND				    0x004
++#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
++#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
++
++#define MV64460_PCI_SCS_0_BASE_ADDR_LOW				    0x010
++#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
++#define MV64460_PCI_SCS_1_BASE_ADDR_LOW				    0x018
++#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
++#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
++#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
++#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
++#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
++#define MV64460_PCI_CAPABILTY_LIST_POINTER			    0x034
++#define MV64460_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
++       /* capability list */
++#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
++#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
++#define MV64460_PCI_VPD_ADDR					    0x048
++#define MV64460_PCI_VPD_DATA					    0x04c
++#define MV64460_PCI_MSI_MESSAGE_CONTROL				    0x050
++#define MV64460_PCI_MSI_MESSAGE_ADDR				    0x054
++#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
++#define MV64460_PCI_MSI_MESSAGE_DATA				    0x05c
++#define MV64460_PCI_X_COMMAND					    0x060
++#define MV64460_PCI_X_STATUS					    0x064
++#define MV64460_PCI_COMPACT_PCI_HOT_SWAP			    0x068
++
++/***********************************************/
++/*   PCI Configuration, Function 1, Registers  */
++/***********************************************/
++
++#define MV64460_PCI_SCS_2_BASE_ADDR_LOW				    0x110
++#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
++#define MV64460_PCI_SCS_3_BASE_ADDR_LOW				    0x118
++#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
++#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
++#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
++
++/***********************************************/
++/*  PCI Configuration, Function 2, Registers   */
++/***********************************************/
++
++#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
++#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
++#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
++#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
++#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
++#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
++
++/***********************************************/
++/*  PCI Configuration, Function 3, Registers   */
++/***********************************************/
++
++#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
++#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
++#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
++#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
++#define MV64460_PCI_CPU_BASE_ADDR_LOW				    0x220
++#define MV64460_PCI_CPU_BASE_ADDR_HIGH				    0x224
++
++/***********************************************/
++/*  PCI Configuration, Function 4, Registers   */
++/***********************************************/
++
++#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
++#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
++#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
++#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
++#define MV64460_PCI_P2P_I_O_BASE_ADDR				    0x420
++#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
++
++/****************************************/
++/* Messaging Unit Registers (I20)	*/
++/****************************************/
++
++#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
++#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
++#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
++#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
++
++#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
++#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
++#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
++#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
++
++#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
++#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
++#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
++#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
++#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
++#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
++#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
++#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
++
++/****************************************/
++/*	  Ethernet Unit Registers		*/
++/****************************************/
++
++#define MV64460_ETH_PHY_ADDR_REG				    0x2000
++#define MV64460_ETH_SMI_REG					    0x2004
++#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
++#define MV64460_ETH_UNIT_DEFAULTID_REG				    0x200c
++#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
++#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
++#define MV64460_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
++#define MV64460_ETH_UNIT_ERROR_ADDR_REG				    0x2094
++#define MV64460_ETH_BAR_0					    0x2200
++#define MV64460_ETH_BAR_1					    0x2208
++#define MV64460_ETH_BAR_2					    0x2210
++#define MV64460_ETH_BAR_3					    0x2218
++#define MV64460_ETH_BAR_4					    0x2220
++#define MV64460_ETH_BAR_5					    0x2228
++#define MV64460_ETH_SIZE_REG_0					    0x2204
++#define MV64460_ETH_SIZE_REG_1					    0x220c
++#define MV64460_ETH_SIZE_REG_2					    0x2214
++#define MV64460_ETH_SIZE_REG_3					    0x221c
++#define MV64460_ETH_SIZE_REG_4					    0x2224
++#define MV64460_ETH_SIZE_REG_5					    0x222c
++#define MV64460_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
++#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
++#define MV64460_ETH_BASE_ADDR_ENABLE_REG			    0x2290
++#define MV64460_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
++#define MV64460_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
++#define MV64460_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
++#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
++#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
++#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
++#define MV64460_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
++#define MV64460_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
++#define MV64460_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
++#define MV64460_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
++#define MV64460_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
++#define MV64460_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
++#define MV64460_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
++#define MV64460_ETH_DSCP_3(port)				   (0x242c + (port<<10))
++#define MV64460_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
++#define MV64460_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
++#define MV64460_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
++#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
++#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
++#define MV64460_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
++#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
++#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
++#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
++#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
++#define MV64460_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
++#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
++#define MV64460_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
++#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
++#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
++#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
++#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
++#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
++#define MV64460_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
++#define MV64460_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
++#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
++#define MV64460_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
++#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
++#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
++#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
++#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
++#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
++#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
++#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
++#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
++
++/*******************************************/
++/*	    CUNIT  Registers		   */
++/*******************************************/
++
++	 /* Address Decoding Register Map */
++
++#define MV64460_CUNIT_BASE_ADDR_REG0				    0xf200
++#define MV64460_CUNIT_BASE_ADDR_REG1				    0xf208
++#define MV64460_CUNIT_BASE_ADDR_REG2				    0xf210
++#define MV64460_CUNIT_BASE_ADDR_REG3				    0xf218
++#define MV64460_CUNIT_SIZE0					    0xf204
++#define MV64460_CUNIT_SIZE1					    0xf20c
++#define MV64460_CUNIT_SIZE2					    0xf214
++#define MV64460_CUNIT_SIZE3					    0xf21c
++#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
++#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
++#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
++#define MV64460_MPSC0_ACCESS_PROTECTION_REG			    0xf254
++#define MV64460_MPSC1_ACCESS_PROTECTION_REG			    0xf258
++#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
++
++	/*  Error Report Registers  */
++
++#define MV64460_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
++#define MV64460_CUNIT_INTERRUPT_MASK_REG			    0xf314
++#define MV64460_CUNIT_ERROR_ADDR				    0xf318
++
++	/*  Cunit Control Registers */
++
++#define MV64460_CUNIT_ARBITER_CONTROL_REG			    0xf300
++#define MV64460_CUNIT_CONFIG_REG				    0xb40c
++#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
++
++	/*  Cunit Debug Registers   */
++
++#define MV64460_CUNIT_DEBUG_LOW					    0xf340
++#define MV64460_CUNIT_DEBUG_HIGH				    0xf344
++#define MV64460_CUNIT_MMASK					    0xf380
++
++	/*  Cunit Base Address Enable Window Bits*/
++#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
++#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
++#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
++#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
++
++	/*  MPSCs Clocks Routing Registers  */
++
++#define MV64460_MPSC_ROUTING_REG				    0xb400
++#define MV64460_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
++#define MV64460_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
++
++	/*  MPSCs Interrupts Registers	  */
++
++#define MV64460_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
++#define MV64460_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
++
++#define MV64460_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
++#define MV64460_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
++#define MV64460_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
++#define MV64460_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
++
++	/*  MPSC0 Registers	 */
++
++
++/***************************************/
++/*	    SDMA Registers	       */
++/***************************************/
++
++#define MV64460_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
++#define MV64460_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
++#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
++#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
++#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
++
++#define MV64460_SDMA_CAUSE_REG					    0xb800
++#define MV64460_SDMA_MASK_REG					    0xb880
++
++
++/****************************************/
++/* SDMA Address Space Targets		*/
++/****************************************/
++
++#define MV64460_SDMA_DRAM_CS_0_TARGET				    0x0e00
++#define MV64460_SDMA_DRAM_CS_1_TARGET				    0x0d00
++#define MV64460_SDMA_DRAM_CS_2_TARGET				    0x0b00
++#define MV64460_SDMA_DRAM_CS_3_TARGET				    0x0700
++
++#define MV64460_SDMA_DEV_CS_0_TARGET				    0x1e01
++#define MV64460_SDMA_DEV_CS_1_TARGET				    0x1d01
++#define MV64460_SDMA_DEV_CS_2_TARGET				    0x1b01
++#define MV64460_SDMA_DEV_CS_3_TARGET				    0x1701
++
++#define MV64460_SDMA_BOOT_CS_TARGET				    0x0f00
++
++#define MV64460_SDMA_SRAM_TARGET				    0x0003
++#define MV64460_SDMA_60X_BUS_TARGET				    0x4003
++
++#define MV64460_PCI_0_TARGET					    0x0003
++#define MV64460_PCI_1_TARGET					    0x0004
++
++
++/* Devices BAR and size registers */
++
++#define MV64460_DEV_CS0_BASE_ADDR				    0x028
++#define MV64460_DEV_CS0_SIZE					    0x030
++#define MV64460_DEV_CS1_BASE_ADDR				    0x228
++#define MV64460_DEV_CS1_SIZE					    0x230
++#define MV64460_DEV_CS2_BASE_ADDR				    0x248
++#define MV64460_DEV_CS2_SIZE					    0x250
++#define MV64460_DEV_CS3_BASE_ADDR				    0x038
++#define MV64460_DEV_CS3_SIZE					    0x040
++#define MV64460_BOOTCS_BASE_ADDR				    0x238
++#define MV64460_BOOTCS_SIZE					    0x240
++
++/* SDMA Window access protection */
++#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0
++#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1
++#define MV64460_SDMA_WIN_ACCESS_FULL 2
++
++/* BRG Interrupts */
++
++#define MV64460_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
++#define MV64460_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
++#define MV64460_BRG_CAUSE_REG					    0xb834
++#define MV64460_BRG_MASK_REG					    0xb8b4
++
++/****************************************/
++/* DMA Channel Control			*/
++/****************************************/
++
++#define MV64460_DMA_CHANNEL0_CONTROL				    0x840
++#define MV64460_DMA_CHANNEL0_CONTROL_HIGH			    0x880
++#define MV64460_DMA_CHANNEL1_CONTROL				    0x844
++#define MV64460_DMA_CHANNEL1_CONTROL_HIGH			    0x884
++#define MV64460_DMA_CHANNEL2_CONTROL				    0x848
++#define MV64460_DMA_CHANNEL2_CONTROL_HIGH			    0x888
++#define MV64460_DMA_CHANNEL3_CONTROL				    0x84C
++#define MV64460_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
++
++
++/****************************************/
++/*	     IDMA Registers		*/
++/****************************************/
++
++#define MV64460_DMA_CHANNEL0_BYTE_COUNT				    0x800
++#define MV64460_DMA_CHANNEL1_BYTE_COUNT				    0x804
++#define MV64460_DMA_CHANNEL2_BYTE_COUNT				    0x808
++#define MV64460_DMA_CHANNEL3_BYTE_COUNT				    0x80C
++#define MV64460_DMA_CHANNEL0_SOURCE_ADDR			    0x810
++#define MV64460_DMA_CHANNEL1_SOURCE_ADDR			    0x814
++#define MV64460_DMA_CHANNEL2_SOURCE_ADDR			    0x818
++#define MV64460_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
++#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
++#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
++#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
++#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
++#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
++#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
++#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
++#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
++#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
++#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
++#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
++#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
++
++ /*  IDMA Address Decoding Base Address Registers  */
++
++#define MV64460_DMA_BASE_ADDR_REG0				    0xa00
++#define MV64460_DMA_BASE_ADDR_REG1				    0xa08
++#define MV64460_DMA_BASE_ADDR_REG2				    0xa10
++#define MV64460_DMA_BASE_ADDR_REG3				    0xa18
++#define MV64460_DMA_BASE_ADDR_REG4				    0xa20
++#define MV64460_DMA_BASE_ADDR_REG5				    0xa28
++#define MV64460_DMA_BASE_ADDR_REG6				    0xa30
++#define MV64460_DMA_BASE_ADDR_REG7				    0xa38
++
++ /*  IDMA Address Decoding Size Address Register   */
++
++#define MV64460_DMA_SIZE_REG0					    0xa04
++#define MV64460_DMA_SIZE_REG1					    0xa0c
++#define MV64460_DMA_SIZE_REG2					    0xa14
++#define MV64460_DMA_SIZE_REG3					    0xa1c
++#define MV64460_DMA_SIZE_REG4					    0xa24
++#define MV64460_DMA_SIZE_REG5					    0xa2c
++#define MV64460_DMA_SIZE_REG6					    0xa34
++#define MV64460_DMA_SIZE_REG7					    0xa3C
++
++ /* IDMA Address Decoding High Address Remap and Access
++		  Protection Registers			  */
++
++#define MV64460_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
++#define MV64460_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
++#define MV64460_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
++#define MV64460_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
++#define MV64460_DMA_BASE_ADDR_ENABLE_REG			    0xa80
++#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
++#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
++#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
++#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
++#define MV64460_DMA_ARBITER_CONTROL				    0x860
++#define MV64460_DMA_CROSS_BAR_TIMEOUT				    0x8d0
++
++ /*  IDMA Headers Retarget Registers   */
++
++#define MV64460_DMA_HEADERS_RETARGET_CONTROL			    0xa84
++#define MV64460_DMA_HEADERS_RETARGET_BASE			    0xa88
++
++ /*  IDMA Interrupt Register  */
++
++#define MV64460_DMA_INTERRUPT_CAUSE_REG				    0x8c0
++#define MV64460_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
++#define MV64460_DMA_ERROR_ADDR					    0x8c8
++#define MV64460_DMA_ERROR_SELECT				    0x8cc
++
++ /*  IDMA Debug Register ( for internal use )	 */
++
++#define MV64460_DMA_DEBUG_LOW					    0x8e0
++#define MV64460_DMA_DEBUG_HIGH					    0x8e4
++#define MV64460_DMA_SPARE					    0xA8C
++
++/****************************************/
++/* Timer_Counter			*/
++/****************************************/
++
++#define MV64460_TIMER_COUNTER0					    0x850
++#define MV64460_TIMER_COUNTER1					    0x854
++#define MV64460_TIMER_COUNTER2					    0x858
++#define MV64460_TIMER_COUNTER3					    0x85C
++#define MV64460_TIMER_COUNTER_0_3_CONTROL			    0x864
++#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
++#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
++
++/****************************************/
++/*	   Watchdog registers		*/
++/****************************************/
++
++#define MV64460_WATCHDOG_CONFIG_REG				    0xb410
++#define MV64460_WATCHDOG_VALUE_REG				    0xb414
++
++/****************************************/
++/* I2C Registers			*/
++/****************************************/
++
++#define MV64460_I2C_SLAVE_ADDR					    0xc000
++#define MV64460_I2C_EXTENDED_SLAVE_ADDR				    0xc010
++#define MV64460_I2C_DATA					    0xc004
++#define MV64460_I2C_CONTROL					    0xc008
++#define MV64460_I2C_STATUS_BAUDE_RATE				    0xc00C
++#define MV64460_I2C_SOFT_RESET					    0xc01c
++
++/****************************************/
++/* GPP Interface Registers		*/
++/****************************************/
++
++#define MV64460_GPP_IO_CONTROL					    0xf100
++#define MV64460_GPP_LEVEL_CONTROL				    0xf110
++#define MV64460_GPP_VALUE					    0xf104
++#define MV64460_GPP_INTERRUPT_CAUSE				    0xf108
++#define MV64460_GPP_INTERRUPT_MASK0				    0xf10c
++#define MV64460_GPP_INTERRUPT_MASK1				    0xf114
++#define MV64460_GPP_VALUE_SET					    0xf118
++#define MV64460_GPP_VALUE_CLEAR					    0xf11c
++
++/****************************************/
++/* Interrupt Controller Registers	*/
++/****************************************/
++
++/****************************************/
++/* Interrupts				*/
++/****************************************/
++
++#define MV64460_MAIN_INTERRUPT_CAUSE_LOW			    0x004
++#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
++#define MV64460_CPU_INTERRUPT0_MASK_LOW				    0x014
++#define MV64460_CPU_INTERRUPT0_MASK_HIGH			    0x01c
++#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
++#define MV64460_CPU_INTERRUPT1_MASK_LOW				    0x034
++#define MV64460_CPU_INTERRUPT1_MASK_HIGH			    0x03c
++#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
++#define MV64460_INTERRUPT0_MASK_0_LOW				    0x054
++#define MV64460_INTERRUPT0_MASK_0_HIGH				    0x05c
++#define MV64460_INTERRUPT0_SELECT_CAUSE				    0x064
++#define MV64460_INTERRUPT1_MASK_0_LOW				    0x074
++#define MV64460_INTERRUPT1_MASK_0_HIGH				    0x07c
++#define MV64460_INTERRUPT1_SELECT_CAUSE				    0x084
++
++/****************************************/
++/*	MPP Interface Registers		*/
++/****************************************/
++
++#define MV64460_MPP_CONTROL0					    0xf000
++#define MV64460_MPP_CONTROL1					    0xf004
++#define MV64460_MPP_CONTROL2					    0xf008
++#define MV64460_MPP_CONTROL3					    0xf00c
++
++/****************************************/
++/*    Serial Initialization registers	*/
++/****************************************/
++
++#define MV64460_SERIAL_INIT_LAST_DATA				    0xf324
++#define MV64460_SERIAL_INIT_CONTROL				    0xf328
++#define MV64460_SERIAL_INIT_STATUS				    0xf32c
++
++
++#endif /* __INCgt64460rh */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/p3mx.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/p3mx.c
+--- u-boot-1.1.6/board/prodrive/p3mx/p3mx.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/p3mx.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,809 @@
++/*
++ * (C) Copyright 2006
++ * Stefan Roese, DENX Software Engineering, sr@denx.de.
++ *
++ * Based on original work by
++ *	Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
++ *	Josh Huber, (C) Copyright 2001 Mission Critical Linux, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
++ * modifications for the cpci750 by reinhard.arlt@esd-electronics.com
++ * modifications for the P3M750 by roel.loeffen@prodrive.nl
++ */
++
++/*
++ * p3m750.c - main board support/init for the Prodrive p3m750/p3m7448.
++ */
++
++#include <common.h>
++#include <74xx_7xx.h>
++#include "../../Marvell/include/memory.h"
++#include "../../Marvell/include/pci.h"
++#include "../../Marvell/include/mv_gen_reg.h"
++#include <net.h>
++#include <i2c.h>
++
++#include "eth.h"
++#include "mpsc.h"
++#include "64460.h"
++#include "mv_regs.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#undef	DEBUG
++/*#define	DEBUG */
++
++#ifdef CONFIG_PCI
++#define	MAP_PCI
++#endif /* of CONFIG_PCI */
++
++#ifdef DEBUG
++#define DP(x) x
++#else
++#define DP(x)
++#endif
++
++extern void flush_data_cache (void);
++extern void invalidate_l1_instruction_cache (void);
++extern flash_info_t flash_info[];
++
++/* ------------------------------------------------------------------------- */
++
++/* this is the current GT register space location */
++/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
++
++/* Unfortunately, we cant change it while we are in flash, so we initialize it
++ * to the "final" value. This means that any debug_led calls before
++ * board_early_init_f wont work right (like in cpu_init_f).
++ * See also my_remap_gt_regs below. (NTL)
++ */
++
++void board_prebootm_init (void);
++unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
++int display_mem_map (void);
++
++/* ------------------------------------------------------------------------- */
++
++/*
++ * This is a version of the GT register space remapping function that
++ * doesn't touch globals (meaning, it's ok to run from flash.)
++ *
++ * Unfortunately, this has the side effect that a writable
++ * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
++ */
++
++void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
++{
++	u32 temp;
++
++	/* check and see if it's already moved */
++	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
++	if ((temp & 0xffff) == new_loc >> 16)
++		return;
++
++	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
++		0xffff0000) | (new_loc >> 16);
++
++	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
++
++	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
++}
++
++#ifdef CONFIG_PCI
++
++static void gt_pci_config (void)
++{
++	unsigned int stat;
++	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, */
++					/* FuncNum 10:8, RegNum 7:2 */
++
++	/*
++	 * In PCIX mode devices provide their own bus and device numbers.
++	 * We query the Discovery II's
++	 * config registers by writing ones to the bus and device.
++	 * We then update the Virtual register with the correct value for the
++	 * bus and device.
++	 */
++	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/* if  PCI-X */
++		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
++
++		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
++
++		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
++		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
++			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
++
++	}
++	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/* if  PCI-X */
++		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
++		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
++
++		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
++		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
++			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
++	}
++
++	/* Enable master */
++	PCI_MASTER_ENABLE (0, SELF);
++	PCI_MASTER_ENABLE (1, SELF);
++
++	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
++	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
++	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) |
++		(1 << 18);
++	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
++	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
++
++	/* ronen:
++	 * add write to pci remap registers for 64460.
++	 * in 64360 when writing to pci base go and overide remap automaticaly,
++	 * in 64460 it doesn't
++	 */
++	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
++	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
++	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
++
++	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
++	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
++	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
++
++	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
++	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
++	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
++
++	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
++	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
++	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
++
++	/* PCI interface settings */
++	/* Timeout set to retry forever */
++	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
++	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
++
++	/* ronen - enable only CS0 and Internal reg!! */
++	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
++	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
++
++	/* ronen:
++	 * update the pci internal registers base address.
++	 */
++#ifdef MAP_PCI
++	for (stat = 0; stat <= PCI_HOST1; stat++)
++		pciWriteConfigReg (stat,
++				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
++				   SELF, CFG_GT_REGS);
++#endif
++
++}
++#endif
++
++/* Setup CPU interface paramaters */
++static void gt_cpu_config (void)
++{
++	cpu_t cpu = get_cpu_type ();
++	ulong tmp;
++
++	/* cpu configuration register */
++	tmp = GTREGREAD (CPU_CONFIGURATION);
++	/* set the SINGLE_CPU bit  see MV64460 */
++#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
++	tmp |= CPU_CONF_SINGLE_CPU;
++#endif
++	tmp &= ~CPU_CONF_AACK_DELAY_2;
++	tmp |= CPU_CONF_DP_VALID;
++	tmp |= CPU_CONF_AP_VALID;
++	tmp |= CPU_CONF_PIPELINE;
++	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
++
++	/* CPU master control register */
++	tmp = GTREGREAD (CPU_MASTER_CONTROL);
++	tmp |= CPU_MAST_CTL_ARB_EN;
++
++	if ((cpu == CPU_7400) ||
++	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
++
++		tmp |= CPU_MAST_CTL_CLEAN_BLK;
++		tmp |= CPU_MAST_CTL_FLUSH_BLK;
++
++	} else {
++		/* cleanblock must be cleared for CPUs
++		 * that do not support this command (603e, 750)
++		 * see Res#1 */
++		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
++		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
++	}
++	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
++}
++
++/*
++ * board_early_init_f.
++ *
++ * set up gal. device mappings, etc.
++ */
++int board_early_init_f (void)
++{
++	/* set up the GT the way the kernel wants it
++	 * the call to move the GT register space will obviously
++	 * fail if it has already been done, but we're going to assume
++	 * that if it's not at the power-on location, it's where we put
++	 * it last time. (huber)
++	 */
++
++	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
++
++#ifdef CONFIG_PCI
++	gt_pci_config ();
++#endif
++	/* mask all external interrupt sources */
++	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
++	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
++	/* new in >MV6436x */
++	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
++	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
++	/* --------------------- */
++	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
++	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
++	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
++	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
++
++	/* Device and Boot bus settings
++	 */
++	memoryMapDeviceSpace(DEVICE0, 0, 0);
++	GT_REG_WRITE(DEVICE_BANK0PARAMETERS, 0);
++	memoryMapDeviceSpace(DEVICE1, 0, 0);
++	GT_REG_WRITE(DEVICE_BANK1PARAMETERS, 0);
++	memoryMapDeviceSpace(DEVICE2, 0, 0);
++	GT_REG_WRITE(DEVICE_BANK2PARAMETERS, 0);
++	memoryMapDeviceSpace(DEVICE3, 0, 0);
++	GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0);
++
++	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_BOOT_PAR);
++
++	gt_cpu_config();
++
++	/* MPP setup */
++	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
++	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
++	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
++	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
++
++	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
++
++	return 0;
++}
++
++/* various things to do after relocation */
++
++int misc_init_r ()
++{
++	u8 val;
++
++	icache_enable ();
++#ifdef CFG_L2
++	l2cache_enable ();
++#endif
++#ifdef CONFIG_MPSC
++	mpsc_sdma_init ();
++	mpsc_init2 ();
++#endif
++
++	/*
++	 * Enable trickle changing in RTC upon powerup
++	 * No diode, 250 ohm series resistor
++	 */
++	val = 0xa5;
++	i2c_write(CFG_I2C_RTC_ADDR, 8, 1, &val, 1);
++
++	return 0;
++}
++
++int board_early_init_r(void)
++{
++	/* now relocate the debug serial driver */
++	mpsc_putchar += gd->reloc_off;
++	mpsc_getchar += gd->reloc_off;
++	mpsc_test_char += gd->reloc_off;
++
++	return 0;
++}
++
++void after_reloc (ulong dest_addr, gd_t * gd)
++{
++	memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
++
++/*	display_mem_map(); */
++
++	/* now, jump to the main U-Boot board init code */
++	board_init_r (gd, dest_addr);
++	/* NOTREACHED */
++}
++
++/*
++ * Check Board Identity:
++ * right now, assume borad type. (there is just one...after all)
++ */
++
++int checkboard (void)
++{
++	char *s = getenv("serial#");
++
++	printf("Board: %s", CFG_BOARD_NAME);
++
++	if (s != NULL) {
++		puts(", serial# ");
++		puts(s);
++	}
++	putc('\n');
++
++	return (0);
++}
++
++/* utility functions */
++void debug_led (int led, int mode)
++{
++}
++
++int display_mem_map (void)
++{
++	int i, j;
++	unsigned int base, size, width;
++
++	/* SDRAM */
++	printf ("SD (DDR) RAM\n");
++	for (i = 0; i <= BANK3; i++) {
++		base = memoryGetBankBaseAddress (i);
++		size = memoryGetBankSize (i);
++		if (size != 0)
++			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
++				i, base, size >> 20);
++	}
++#ifdef CONFIG_PCI
++	/* CPU's PCI windows */
++	for (i = 0; i <= PCI_HOST1; i++) {
++		printf ("\nCPU's PCI %d windows\n", i);
++		base = pciGetSpaceBase (i, PCI_IO);
++		size = pciGetSpaceSize (i, PCI_IO);
++		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
++			size >> 20);
++		/* ronen currently only first PCI MEM is used 3 */
++		for (j = 0; j <= PCI_REGION0; j++) {
++			base = pciGetSpaceBase (i, j);
++			size = pciGetSpaceSize (i, j);
++			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n",
++				j, base, size >> 20);
++		}
++	}
++#endif /* of CONFIG_PCI */
++
++	/* Bootrom */
++	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
++	size = memoryGetDeviceSize (BOOT_DEVICE);
++	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
++	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\t- FLASH\n",
++		base, size >> 20, width);
++
++	return (0);
++}
++
++/* DRAM check routines copied from gw8260 */
++
++#if defined (CFG_DRAM_TEST)
++
++/*********************************************************************/
++/* NAME:  move64() -  moves a double word (64-bit)		     */
++/*								     */
++/* DESCRIPTION:							     */
++/*   this function performs a double word move from the data at	     */
++/*   the source pointer to the location at the destination pointer.  */
++/*								     */
++/* INPUTS:							     */
++/*   unsigned long long *src  - pointer to data to move		     */
++/*								     */
++/* OUTPUTS:							     */
++/*   unsigned long long *dest - pointer to locate to move data	     */
++/*								     */
++/* RETURNS:							     */
++/*   None							     */
++/*								     */
++/* RESTRICTIONS/LIMITATIONS:					     */
++/*   May cloober fr0.						     */
++/*								     */
++/*********************************************************************/
++static void move64 (unsigned long long *src, unsigned long long *dest)
++{
++	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
++	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
++	     : : : "fr0");		/* Clobbers fr0         */
++	return;
++}
++
++
++#if defined (CFG_DRAM_TEST_DATA)
++
++unsigned long long pattern[] = {
++	0xaaaaaaaaaaaaaaaaULL,
++	0xccccccccccccccccULL,
++	0xf0f0f0f0f0f0f0f0ULL,
++	0xff00ff00ff00ff00ULL,
++	0xffff0000ffff0000ULL,
++	0xffffffff00000000ULL,
++	0x00000000ffffffffULL,
++	0x0000ffff0000ffffULL,
++	0x00ff00ff00ff00ffULL,
++	0x0f0f0f0f0f0f0f0fULL,
++	0x3333333333333333ULL,
++	0x5555555555555555ULL
++};
++
++/*********************************************************************/
++/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
++/*								     */
++/* DESCRIPTION:							     */
++/*   Tests data lines for shorts and opens by forcing adjacent data  */
++/*   to opposite states. Because the data lines could be routed in   */
++/*   an arbitrary manner the must ensure test patterns ensure that   */
++/*   every case is tested. By using the following series of binary   */
++/*   patterns every combination of adjacent bits is test regardless  */
++/*   of routing.						     */
++/*								     */
++/*     ...101010101010101010101010				     */
++/*     ...110011001100110011001100				     */
++/*     ...111100001111000011110000				     */
++/*     ...111111110000000011111111				     */
++/*								     */
++/*   Carrying this out, gives us six hex patterns as follows:	     */
++/*								     */
++/*     0xaaaaaaaaaaaaaaaa					     */
++/*     0xcccccccccccccccc					     */
++/*     0xf0f0f0f0f0f0f0f0					     */
++/*     0xff00ff00ff00ff00					     */
++/*     0xffff0000ffff0000					     */
++/*     0xffffffff00000000					     */
++/*								     */
++/*   The number test patterns will always be given by:		     */
++/*								     */
++/*   log(base 2)(number data bits) = log2 (64) = 6		     */
++/*								     */
++/*   To test for short and opens to other signals on our boards. we  */
++/*   simply							     */
++/*   test with the 1's complemnt of the paterns as well.	     */
++/*								     */
++/* OUTPUTS:							     */
++/*   Displays failing test pattern				     */
++/*								     */
++/* RETURNS:							     */
++/*   0 -  Passed test						     */
++/*   1 -  Failed test						     */
++/*								     */
++/* RESTRICTIONS/LIMITATIONS:					     */
++/*  Assumes only one one SDRAM bank				     */
++/*								     */
++/*********************************************************************/
++int mem_test_data (void)
++{
++	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
++	unsigned long long temp64 = 0;
++	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
++	int i;
++	unsigned int hi, lo;
++
++	for (i = 0; i < num_patterns; i++) {
++		move64 (&(pattern[i]), pmem);
++		move64 (pmem, &temp64);
++
++		/* hi = (temp64>>32) & 0xffffffff;          */
++		/* lo = temp64 & 0xffffffff;                */
++		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
++
++		hi = (pattern[i] >> 32) & 0xffffffff;
++		lo = pattern[i] & 0xffffffff;
++		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
++
++		if (temp64 != pattern[i]) {
++			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
++				hi, lo);
++			return 1;
++		}
++	}
++
++	return 0;
++}
++#endif /* CFG_DRAM_TEST_DATA */
++
++#if defined (CFG_DRAM_TEST_ADDRESS)
++/*********************************************************************/
++/* NAME:  mem_test_address() -	test address lines		     */
++/*								     */
++/* DESCRIPTION:							     */
++/*   This function performs a test to verify that each word im	     */
++/*   memory is uniquly addressable. The test sequence is as follows: */
++/*								     */
++/*   1) write the address of each word to each word.		     */
++/*   2) verify that each location equals its address		     */
++/*								     */
++/* OUTPUTS:							     */
++/*   Displays failing test pattern and address			     */
++/*								     */
++/* RETURNS:							     */
++/*   0 -  Passed test						     */
++/*   1 -  Failed test						     */
++/*								     */
++/* RESTRICTIONS/LIMITATIONS:					     */
++/*								     */
++/*								     */
++/*********************************************************************/
++int mem_test_address (void)
++{
++	volatile unsigned int *pmem =
++		(volatile unsigned int *) CFG_MEMTEST_START;
++	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
++	unsigned int i;
++
++	/* write address to each location */
++	for (i = 0; i < size; i++)
++		pmem[i] = i;
++
++	/* verify each loaction */
++	for (i = 0; i < size; i++) {
++		if (pmem[i] != i) {
++			printf ("\n   Address Test Failed at 0x%x", i);
++			return 1;
++		}
++	}
++	return 0;
++}
++#endif /* CFG_DRAM_TEST_ADDRESS */
++
++#if defined (CFG_DRAM_TEST_WALK)
++/*********************************************************************/
++/* NAME:   mem_march() -  memory march				     */
++/*								     */
++/* DESCRIPTION:							     */
++/*   Marches up through memory. At each location verifies rmask if   */
++/*   read = 1. At each location write wmask if	write = 1. Displays  */
++/*   failing address and pattern.				     */
++/*								     */
++/* INPUTS:							     */
++/*   volatile unsigned long long * base - start address of test	     */
++/*   unsigned int size - number of dwords(64-bit) to test	     */
++/*   unsigned long long rmask - read verify mask		     */
++/*   unsigned long long wmask - wrtie verify mask		     */
++/*   short read - verifies rmask if read = 1			     */
++/*   short write  - writes wmask if write = 1			     */
++/*								     */
++/* OUTPUTS:							     */
++/*   Displays failing test pattern and address			     */
++/*								     */
++/* RETURNS:							     */
++/*   0 -  Passed test						     */
++/*   1 -  Failed test						     */
++/*								     */
++/* RESTRICTIONS/LIMITATIONS:					     */
++/*								     */
++/*								     */
++/*********************************************************************/
++int mem_march (volatile unsigned long long *base,
++	       unsigned int size,
++	       unsigned long long rmask,
++	       unsigned long long wmask, short read, short write)
++{
++	unsigned int i;
++	unsigned long long temp = 0;
++	unsigned int hitemp, lotemp, himask, lomask;
++
++	for (i = 0; i < size; i++) {
++		if (read != 0) {
++			/* temp = base[i]; */
++			move64 ((unsigned long long *) &(base[i]), &temp);
++			if (rmask != temp) {
++				hitemp = (temp >> 32) & 0xffffffff;
++				lotemp = temp & 0xffffffff;
++				himask = (rmask >> 32) & 0xffffffff;
++				lomask = rmask & 0xffffffff;
++
++				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
++				return 1;
++			}
++		}
++		if (write != 0) {
++			/*  base[i] = wmask; */
++			move64 (&wmask, (unsigned long long *) &(base[i]));
++		}
++	}
++	return 0;
++}
++#endif /* CFG_DRAM_TEST_WALK */
++
++/*********************************************************************/
++/* NAME:   mem_test_walk() -  a simple walking ones test	     */
++/*								     */
++/* DESCRIPTION:							     */
++/*   Performs a walking ones through entire physical memory. The     */
++/*   test uses as series of memory marches, mem_march(), to verify   */
++/*   and write the test patterns to memory. The test sequence is as  */
++/*   follows:							     */
++/*     1) march writing 0000...0001				     */
++/*     2) march verifying 0000...0001  , writing  0000...0010	     */
++/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
++/*	   the write mask equals 1000...0000			     */
++/*     4) march verifying 1000...0000				     */
++/*   The test fails if any of the memory marches return a failure.   */
++/*								     */
++/* OUTPUTS:							     */
++/*   Displays which pass on the memory test is executing	     */
++/*								     */
++/* RETURNS:							     */
++/*   0 -  Passed test						     */
++/*   1 -  Failed test						     */
++/*								     */
++/* RESTRICTIONS/LIMITATIONS:					     */
++/*								     */
++/*								     */
++/*********************************************************************/
++int mem_test_walk (void)
++{
++	unsigned long long mask;
++	volatile unsigned long long *pmem =
++		(volatile unsigned long long *) CFG_MEMTEST_START;
++	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
++
++	unsigned int i;
++
++	mask = 0x01;
++
++	printf ("Initial Pass");
++	mem_march (pmem, size, 0x0, 0x1, 0, 1);
++
++	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
++	printf ("		");
++	printf ("         ");
++	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
++
++	for (i = 0; i < 63; i++) {
++		printf ("Pass %2d", i + 2);
++		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
++			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
++			return 1;
++		}
++		mask = mask << 1;
++		printf ("\b\b\b\b\b\b\b");
++	}
++
++	printf ("Last Pass");
++	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
++		/* printf("mask: 0x%x", mask); */
++		return 1;
++	}
++	printf ("\b\b\b\b\b\b\b\b\b");
++	printf ("	     ");
++	printf ("\b\b\b\b\b\b\b\b\b");
++
++	return 0;
++}
++
++/*********************************************************************/
++/* NAME:    testdram() -  calls any enabled memory tests	     */
++/*								     */
++/* DESCRIPTION:							     */
++/*   Runs memory tests if the environment test variables are set to  */
++/*   'y'.							     */
++/*								     */
++/* INPUTS:							     */
++/*   testdramdata    - If set to 'y', data test is run.		     */
++/*   testdramaddress - If set to 'y', address test is run.	     */
++/*   testdramwalk    - If set to 'y', walking ones test is run	     */
++/*								     */
++/* OUTPUTS:							     */
++/*   None							     */
++/*								     */
++/* RETURNS:							     */
++/*   0 -  Passed test						     */
++/*   1 -  Failed test						     */
++/*								     */
++/* RESTRICTIONS/LIMITATIONS:					     */
++/*								     */
++/*								     */
++/*********************************************************************/
++int testdram (void)
++{
++	char *s;
++	int rundata    = 0;
++	int runaddress = 0;
++	int runwalk    = 0;
++
++#ifdef CFG_DRAM_TEST_DATA
++	s = getenv ("testdramdata");
++	rundata = (s && (*s == 'y')) ? 1 : 0;
++#endif
++#ifdef CFG_DRAM_TEST_ADDRESS
++	s = getenv ("testdramaddress");
++	runaddress = (s && (*s == 'y')) ? 1 : 0;
++#endif
++#ifdef CFG_DRAM_TEST_WALK
++	s = getenv ("testdramwalk");
++	runwalk = (s && (*s == 'y')) ? 1 : 0;
++#endif
++
++	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
++		printf ("Testing RAM from 0x%08x to 0x%08x ...  "
++			"(don't panic... that will take a moment !!!!)\n",
++			CFG_MEMTEST_START, CFG_MEMTEST_END);
++#ifdef CFG_DRAM_TEST_DATA
++	if (rundata == 1) {
++		printf ("Test DATA ...  ");
++		if (mem_test_data () == 1) {
++			printf ("failed \n");
++			return 1;
++		} else
++			printf ("ok \n");
++	}
++#endif
++#ifdef CFG_DRAM_TEST_ADDRESS
++	if (runaddress == 1) {
++		printf ("Test ADDRESS ...  ");
++		if (mem_test_address () == 1) {
++			printf ("failed \n");
++			return 1;
++		} else
++			printf ("ok \n");
++	}
++#endif
++#ifdef CFG_DRAM_TEST_WALK
++	if (runwalk == 1) {
++		printf ("Test WALKING ONEs ...  ");
++		if (mem_test_walk () == 1) {
++			printf ("failed \n");
++			return 1;
++		} else
++			printf ("ok \n");
++	}
++#endif
++	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
++		printf ("passed\n");
++	return 0;
++
++}
++#endif /* CFG_DRAM_TEST */
++
++/* ronen - the below functions are used by the bootm function           */
++/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
++/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
++/*    the kernel data areas.                                            */
++/*  - we diable and invalidate the icache and dcache.                   */
++void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
++{
++	u32 temp;
++
++	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
++	if ((temp & 0xffff) == new_loc >> 16)
++		return;
++
++	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
++		0xffff0000) | (new_loc >> 16);
++
++	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
++
++	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
++							new_loc |
++							(INTERNAL_SPACE_DECODE)))))
++	       != temp);
++
++}
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/pci.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/pci.c
+--- u-boot-1.1.6/board/prodrive/p3mx/pci.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/pci.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,1025 @@
++/*
++ * (C) Copyright 2000
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++/* PCI.c - PCI functions */
++
++
++#include <common.h>
++#ifdef CONFIG_PCI
++#include <pci.h>
++
++#ifdef CONFIG_PCI_PNP
++void pciauto_config_init(struct pci_controller *hose);
++int  pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
++#endif
++
++#include "../../Marvell/include/pci.h"
++
++#undef DEBUG
++#undef IDE_SET_NATIVE_MODE
++static unsigned int local_buses[] = { 0, 0 };
++
++static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
++	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
++	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
++};
++
++#ifdef CONFIG_USE_CPCIDVI
++typedef struct {
++	unsigned int base;
++	unsigned int init;
++} GT_CPCIDVI_ROM_T;
++
++static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
++#endif
++
++#ifdef DEBUG
++static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
++static void gt_pci_bus_mode_display (PCI_HOST host)
++{
++	unsigned int mode;
++
++
++	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
++	switch (mode) {
++	case 0:
++		printf ("PCI %d bus mode: Conventional PCI\n", host);
++		break;
++	case 1:
++		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
++		break;
++	case 2:
++		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
++		break;
++	case 3:
++		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
++		break;
++	default:
++		printf ("Unknown BUS %d\n", mode);
++	}
++}
++#endif
++
++static const unsigned int pci_p2p_configuration_reg[] = {
++	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
++};
++
++static const unsigned int pci_configuration_address[] = {
++	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
++};
++
++static const unsigned int pci_configuration_data[] = {
++	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
++	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
++};
++
++static const unsigned int pci_error_cause_reg[] = {
++	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
++};
++
++static const unsigned int pci_arbiter_control[] = {
++	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
++};
++
++static const unsigned int pci_address_space_en[] = {
++	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
++};
++
++static const unsigned int pci_snoop_control_base_0_low[] = {
++	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
++};
++static const unsigned int pci_snoop_control_top_0[] = {
++	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
++};
++
++static const unsigned int pci_access_control_base_0_low[] = {
++	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
++};
++static const unsigned int pci_access_control_top_0[] = {
++	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
++};
++
++static const unsigned int pci_scs_bank_size[2][4] = {
++	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
++	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
++	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
++	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
++};
++
++static const unsigned int pci_p2p_configuration[] = {
++	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
++};
++
++
++/********************************************************************
++* pciWriteConfigReg - Write to a PCI configuration register
++*		    - Make sure the GT is configured as a master before writing
++*		      to another device on the PCI.
++*		    - The function takes care of Big/Little endian conversion.
++*
++*
++* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
++*		   (or any other PCI device spec)
++*	    pciDevNum: The device number needs to be addressed.
++*
++*  Configuration Address 0xCF8:
++*
++*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
++*  |congif|Reserved|  Bus |Device|Function|Register|00|
++*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
++*
++*********************************************************************/
++void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
++			unsigned int pciDevNum, unsigned int data)
++{
++	volatile unsigned int DataForAddrReg;
++	unsigned int functionNum;
++	unsigned int busNum = 0;
++	unsigned int addr;
++
++	if (pciDevNum > 32)	/* illegal device Number */
++		return;
++	if (pciDevNum == SELF) {	/* configure our configuration space. */
++		pciDevNum =
++			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
++			0x1f;
++		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
++			0xff0000;
++	}
++	functionNum = regOffset & 0x00000700;
++	pciDevNum = pciDevNum << 11;
++	regOffset = regOffset & 0xfc;
++	DataForAddrReg =
++		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
++	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
++	GT_REG_READ (pci_configuration_address[host], &addr);
++	if (addr != DataForAddrReg)
++		return;
++	GT_REG_WRITE (pci_configuration_data[host], data);
++}
++
++/********************************************************************
++* pciReadConfigReg  - Read from a PCI0 configuration register
++*		    - Make sure the GT is configured as a master before reading
++*		      from another device on the PCI.
++*		    - The function takes care of Big/Little endian conversion.
++* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
++*			spec)
++*	    pciDevNum: The device number needs to be addressed.
++* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
++*		  cause register to make sure the data is valid
++*
++*  Configuration Address 0xCF8:
++*
++*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
++*  |congif|Reserved|  Bus |Device|Function|Register|00|
++*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
++*
++*********************************************************************/
++unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
++			       unsigned int pciDevNum)
++{
++	volatile unsigned int DataForAddrReg;
++	unsigned int data;
++	unsigned int functionNum;
++	unsigned int busNum = 0;
++
++	if (pciDevNum > 32)	/* illegal device Number */
++		return 0xffffffff;
++	if (pciDevNum == SELF) {	/* configure our configuration space. */
++		pciDevNum =
++			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
++			0x1f;
++		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
++			0xff0000;
++	}
++	functionNum = regOffset & 0x00000700;
++	pciDevNum = pciDevNum << 11;
++	regOffset = regOffset & 0xfc;
++	DataForAddrReg =
++		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
++	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
++	GT_REG_READ (pci_configuration_address[host], &data);
++	if (data != DataForAddrReg)
++		return 0xffffffff;
++	GT_REG_READ (pci_configuration_data[host], &data);
++	return data;
++}
++
++/********************************************************************
++* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
++*				the agent is placed on another Bus. For more
++*				information read P2P in the PCI spec.
++*
++* Inputs:   unsigned int regOffset - The register offset as it apears in the
++*	    GT spec (or any other PCI device spec).
++*	    unsigned int pciDevNum - The device number needs to be addressed.
++*	    unsigned int busNum - On which bus does the Target agent connect
++*				  to.
++*	    unsigned int data - data to be written.
++*
++*  Configuration Address 0xCF8:
++*
++*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
++*  |congif|Reserved|  Bus |Device|Function|Register|01|
++*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
++*
++*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
++*   PCI spec referring to P2P.
++*
++*********************************************************************/
++void pciOverBridgeWriteConfigReg (PCI_HOST host,
++				  unsigned int regOffset,
++				  unsigned int pciDevNum,
++				  unsigned int busNum, unsigned int data)
++{
++	unsigned int DataForReg;
++	unsigned int functionNum;
++
++	functionNum = regOffset & 0x00000700;
++	pciDevNum = pciDevNum << 11;
++	regOffset = regOffset & 0xff;
++	busNum = busNum << 16;
++	if (pciDevNum == SELF) {	/* This board */
++		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
++	} else {
++		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
++			BIT31 | BIT0;
++	}
++	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
++	GT_REG_WRITE (pci_configuration_data[host], data);
++}
++
++
++/********************************************************************
++* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
++*				the agent target locate on another PCI bus.
++*			      - Make sure the GT is configured as a master
++*				before reading from another device on the PCI.
++*			      - The function takes care of Big/Little endian
++*				conversion.
++* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
++*			 spec). (configuration register offset.)
++*	    pciDevNum: The device number needs to be addressed.
++*	    busNum: the Bus number where the agent is place.
++* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
++*		  cause register to make sure the data is valid
++*
++*  Configuration Address 0xCF8:
++*
++*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
++*  |congif|Reserved|  Bus |Device|Function|Register|01|
++*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
++*
++*********************************************************************/
++unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
++					 unsigned int regOffset,
++					 unsigned int pciDevNum,
++					 unsigned int busNum)
++{
++	unsigned int DataForReg;
++	unsigned int data;
++	unsigned int functionNum;
++
++	functionNum = regOffset & 0x00000700;
++	pciDevNum = pciDevNum << 11;
++	regOffset = regOffset & 0xff;
++	busNum = busNum << 16;
++	if (pciDevNum == SELF) {	/* This board */
++		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
++	} else {		/* agent on another bus */
++
++		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
++			BIT0 | BIT31;
++	}
++	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
++	GT_REG_READ (pci_configuration_data[host], &data);
++	return data;
++}
++
++
++/********************************************************************
++* pciGetRegOffset - Gets the register offset for this region config.
++*
++* INPUT:   Bus, Region - The bus and region we ask for its base address.
++* OUTPUT:   N/A
++* RETURNS: PCI register base address
++*********************************************************************/
++static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
++{
++	switch (host) {
++	case PCI_HOST0:
++		switch (region) {
++		case PCI_IO:
++			return PCI_0I_O_LOW_DECODE_ADDRESS;
++		case PCI_REGION0:
++			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
++		case PCI_REGION1:
++			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
++		case PCI_REGION2:
++			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
++		case PCI_REGION3:
++			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
++		}
++	case PCI_HOST1:
++		switch (region) {
++		case PCI_IO:
++			return PCI_1I_O_LOW_DECODE_ADDRESS;
++		case PCI_REGION0:
++			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
++		case PCI_REGION1:
++			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
++		case PCI_REGION2:
++			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
++		case PCI_REGION3:
++			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
++		}
++	}
++	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
++}
++
++static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
++{
++	switch (host) {
++	case PCI_HOST0:
++		switch (region) {
++		case PCI_IO:
++			return PCI_0I_O_ADDRESS_REMAP;
++		case PCI_REGION0:
++			return PCI_0MEMORY0_ADDRESS_REMAP;
++		case PCI_REGION1:
++			return PCI_0MEMORY1_ADDRESS_REMAP;
++		case PCI_REGION2:
++			return PCI_0MEMORY2_ADDRESS_REMAP;
++		case PCI_REGION3:
++			return PCI_0MEMORY3_ADDRESS_REMAP;
++		}
++	case PCI_HOST1:
++		switch (region) {
++		case PCI_IO:
++			return PCI_1I_O_ADDRESS_REMAP;
++		case PCI_REGION0:
++			return PCI_1MEMORY0_ADDRESS_REMAP;
++		case PCI_REGION1:
++			return PCI_1MEMORY1_ADDRESS_REMAP;
++		case PCI_REGION2:
++			return PCI_1MEMORY2_ADDRESS_REMAP;
++		case PCI_REGION3:
++			return PCI_1MEMORY3_ADDRESS_REMAP;
++		}
++	}
++	return PCI_0MEMORY0_ADDRESS_REMAP;
++}
++
++/********************************************************************
++* pciGetBaseAddress - Gets the base address of a PCI.
++*	    - If the PCI size is 0 then this base address has no meaning!!!
++*
++*
++* INPUT:   Bus, Region - The bus and region we ask for its base address.
++* OUTPUT:   N/A
++* RETURNS: PCI base address.
++*********************************************************************/
++unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
++{
++	unsigned int regBase;
++	unsigned int regEnd;
++	unsigned int regOffset = pciGetRegOffset (host, region);
++
++	GT_REG_READ (regOffset, &regBase);
++	GT_REG_READ (regOffset + 8, &regEnd);
++
++	if (regEnd <= regBase)
++		return 0xffffffff;	/* ERROR !!! */
++
++	regBase = regBase << 16;
++	return regBase;
++}
++
++bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
++		  unsigned int bankBase, unsigned int bankLength)
++{
++	unsigned int low = 0xfff;
++	unsigned int high = 0x0;
++	unsigned int regOffset = pciGetRegOffset (host, region);
++	unsigned int remapOffset = pciGetRemapOffset (host, region);
++
++	if (bankLength != 0) {
++		low = (bankBase >> 16) & 0xffff;
++		high = ((bankBase + bankLength) >> 16) - 1;
++	}
++
++	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
++	GT_REG_WRITE (regOffset + 8, high);
++
++	if (bankLength != 0) {	/* must do AFTER writing maps */
++		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
++								   dont support upper 32
++								   in this driver */
++	}
++	return true;
++}
++
++unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
++{
++	unsigned int low;
++	unsigned int regOffset = pciGetRegOffset (host, region);
++
++	GT_REG_READ (regOffset, &low);
++	return (low & 0xffff) << 16;
++}
++
++unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
++{
++	unsigned int low, high;
++	unsigned int regOffset = pciGetRegOffset (host, region);
++
++	GT_REG_READ (regOffset, &low);
++	GT_REG_READ (regOffset + 8, &high);
++	return ((high & 0xffff) + 1) << 16;
++}
++
++
++/* ronen - 7/Dec/03*/
++/********************************************************************
++* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
++* Inputs: one of the PCI BAR
++*********************************************************************/
++void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
++{
++	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
++}
++
++void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
++{
++	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
++}
++
++/********************************************************************
++* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
++*
++* Inputs: base and size of PCI SCS
++*********************************************************************/
++void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
++		       unsigned int pciDramBase, unsigned int pciDramSize)
++{
++	/*ronen different function for 3rd bank. */
++	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
++
++	pciDramBase = pciDramBase & 0xfffff000;
++	pciDramBase = pciDramBase | (pciReadConfigReg (host,
++						       PCI_SCS_0_BASE_ADDRESS
++						       + offset,
++						       SELF) & 0x00000fff);
++	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
++			   pciDramBase);
++	if (pciDramSize == 0)
++		pciDramSize++;
++	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
++	gtPciEnableInternalBAR (host, bank);
++}
++
++/********************************************************************
++* pciSetRegionFeatures - This function modifys one of the 8 regions with
++*			  feature bits given as an input.
++*			- Be advised to check the spec before modifying them.
++* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
++*	  unsigned int features - See file: pci.h there are defintion for those
++*				  region features.
++*	  unsigned int baseAddress - The region base Address.
++*	  unsigned int topAddress - The region top Address.
++* Returns: false if one of the parameters is erroneous true otherwise.
++*********************************************************************/
++bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
++			   unsigned int features, unsigned int baseAddress,
++			   unsigned int regionLength)
++{
++	unsigned int accessLow;
++	unsigned int accessHigh;
++	unsigned int accessTop = baseAddress + regionLength;
++
++	if (regionLength == 0) {	/* close the region. */
++		pciDisableAccessRegion (host, region);
++		return true;
++	}
++	/* base Address is store is bits [11:0] */
++	accessLow = (baseAddress & 0xfff00000) >> 20;
++	/* All the features are update according to the defines in pci.h (to be on
++	   the safe side we disable bits: [11:0] */
++	accessLow = accessLow | (features & 0xfffff000);
++	/* write to the Low Access Region register */
++	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
++		      accessLow);
++
++	accessHigh = (accessTop & 0xfff00000) >> 20;
++
++	/* write to the High Access Region register */
++	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
++		      accessHigh - 1);
++	return true;
++}
++
++/********************************************************************
++* pciDisableAccessRegion - Disable The given Region by writing MAX size
++*			    to its low Address and MIN size to its high Address.
++*
++* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
++* Returns:  N/A.
++*********************************************************************/
++void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
++{
++	/* writing back the registers default values. */
++	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
++		      0x01001fff);
++	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
++}
++
++/********************************************************************
++* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
++*
++* Inputs:   N/A
++* Returns:  true.
++*********************************************************************/
++bool pciArbiterEnable (PCI_HOST host)
++{
++	unsigned int regData;
++
++	GT_REG_READ (pci_arbiter_control[host], &regData);
++	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
++	return true;
++}
++
++/********************************************************************
++* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
++*
++* Inputs:   N/A
++* Returns:  true
++*********************************************************************/
++bool pciArbiterDisable (PCI_HOST host)
++{
++	unsigned int regData;
++
++	GT_REG_READ (pci_arbiter_control[host], &regData);
++	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
++	return true;
++}
++
++/********************************************************************
++* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
++*
++* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
++*	    PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
++*	    PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
++*	    PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
++*	    PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
++*	    PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
++*	    PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
++* Returns:  true
++*********************************************************************/
++bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
++				  PCI_AGENT_PRIO externalAgent0,
++				  PCI_AGENT_PRIO externalAgent1,
++				  PCI_AGENT_PRIO externalAgent2,
++				  PCI_AGENT_PRIO externalAgent3,
++				  PCI_AGENT_PRIO externalAgent4,
++				  PCI_AGENT_PRIO externalAgent5)
++{
++	unsigned int regData;
++	unsigned int writeData;
++
++	GT_REG_READ (pci_arbiter_control[host], &regData);
++	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
++		(externalAgent1 << 9) + (externalAgent2 << 10) +
++		(externalAgent3 << 11) + (externalAgent4 << 12) +
++		(externalAgent5 << 13);
++	regData = (regData & 0xffffc07f) | writeData;
++	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
++	return true;
++}
++
++/********************************************************************
++* pciParkingDisable - Park on last option disable, with this function you can
++*		       disable the park on last mechanism for each agent.
++*		       disabling this option for all agents results parking
++*		       on the internal master.
++*
++* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
++*	  PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
++*	  PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
++*	  PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
++*	  PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
++*	  PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
++*	  PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
++* Returns:  true
++*********************************************************************/
++bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
++			PCI_AGENT_PARK externalAgent0,
++			PCI_AGENT_PARK externalAgent1,
++			PCI_AGENT_PARK externalAgent2,
++			PCI_AGENT_PARK externalAgent3,
++			PCI_AGENT_PARK externalAgent4,
++			PCI_AGENT_PARK externalAgent5)
++{
++	unsigned int regData;
++	unsigned int writeData;
++
++	GT_REG_READ (pci_arbiter_control[host], &regData);
++	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
++		(externalAgent1 << 16) + (externalAgent2 << 17) +
++		(externalAgent3 << 18) + (externalAgent4 << 19) +
++		(externalAgent5 << 20);
++	regData = (regData & ~(0x7f << 14)) | writeData;
++	GT_REG_WRITE (pci_arbiter_control[host], regData);
++	return true;
++}
++
++/********************************************************************
++* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
++*			respond to grant assertion within a window specified in
++*			the input value: 'brokenValue'.
++*
++* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
++*			grant without asserting frame.
++* Returns:  Error for illegal broken value otherwise true.
++*********************************************************************/
++bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
++{
++	unsigned int data;
++	unsigned int regData;
++
++	if (brokenValue > 0xf)
++		return false;	/* brokenValue must be 4 bit */
++	data = brokenValue << 3;
++	GT_REG_READ (pci_arbiter_control[host], &regData);
++	regData = (regData & 0xffffff87) | data;
++	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
++	return true;
++}
++
++/********************************************************************
++* pciDisableBrokenAgentDetection - This function disable the Broken agent
++*			    Detection mechanism.
++*			    NOTE: This operation may cause a dead lock on the
++*			    pci0 arbitration.
++*
++* Inputs:   N/A
++* Returns:  true.
++*********************************************************************/
++bool pciDisableBrokenAgentDetection (PCI_HOST host)
++{
++	unsigned int regData;
++
++	GT_REG_READ (pci_arbiter_control[host], &regData);
++	regData = regData & 0xfffffffd;
++	GT_REG_WRITE (pci_arbiter_control[host], regData);
++	return true;
++}
++
++/********************************************************************
++* pciP2PConfig - This function set the PCI_n P2P configurate.
++*		  For more information on the P2P read PCI spec.
++*
++* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
++*				       Boundry.
++*	   unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
++*				       Boundry.
++*	   unsigned int busNum - The CPI bus number to which the PCI interface
++*				       is connected.
++*	   unsigned int devNum - The PCI interface's device number.
++*
++* Returns:  true.
++*********************************************************************/
++bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
++		   unsigned int SecondBusHigh,
++		   unsigned int busNum, unsigned int devNum)
++{
++	unsigned int regData;
++
++	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
++		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
++	GT_REG_WRITE (pci_p2p_configuration[host], regData);
++	return true;
++}
++
++/********************************************************************
++* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
++*			   supports Cache Coherency in the PCI_n interface.
++* Inputs: region - One of the four regions.
++*	  snoopType - There is four optional Types:
++*			 1. No Snoop.
++*			 2. Snoop to WT region.
++*			 3. Snoop to WB region.
++*			 4. Snoop & Invalidate to WB region.
++*	  baseAddress - Base Address of this region.
++*	  regionLength - Region length.
++* Returns: false if one of the parameters is wrong otherwise return true.
++*********************************************************************/
++bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
++			    PCI_SNOOP_TYPE snoopType,
++			    unsigned int baseAddress,
++			    unsigned int regionLength)
++{
++	unsigned int snoopXbaseAddress;
++	unsigned int snoopXtopAddress;
++	unsigned int data;
++	unsigned int snoopHigh = baseAddress + regionLength;
++
++	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
++		return false;
++	snoopXbaseAddress =
++		pci_snoop_control_base_0_low[host] + 0x10 * region;
++	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
++	if (regionLength == 0) {	/* closing the region */
++		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
++		GT_REG_WRITE (snoopXtopAddress, 0);
++		return true;
++	}
++	baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
++	data = (baseAddress >> 20) | snoopType << 12;
++	GT_REG_WRITE (snoopXbaseAddress, data);
++	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
++	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
++	return true;
++}
++
++static int gt_read_config_dword (struct pci_controller *hose,
++				 pci_dev_t dev, int offset, u32 * value)
++{
++	int bus = PCI_BUS (dev);
++
++	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
++		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
++					   PCI_DEV (dev));
++	} else {
++		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
++						     cfg_addr, offset,
++						     PCI_DEV (dev), bus);
++	}
++
++	return 0;
++}
++
++static int gt_write_config_dword (struct pci_controller *hose,
++				  pci_dev_t dev, int offset, u32 value)
++{
++	int bus = PCI_BUS (dev);
++
++	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
++		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
++				   PCI_DEV (dev), value);
++	} else {
++		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
++					     offset, PCI_DEV (dev), bus,
++					     value);
++	}
++	return 0;
++}
++
++
++static void gt_setup_ide (struct pci_controller *hose,
++			  pci_dev_t dev, struct pci_config_table *entry)
++{
++	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
++	u32 bar_response, bar_value;
++	int bar;
++
++	for (bar = 0; bar < 6; bar++) {
++		/*ronen different function for 3rd bank. */
++		unsigned int offset =
++			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
++
++		pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
++					     0x0);
++		pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
++					    &bar_response);
++
++		pciauto_region_allocate (bar_response &
++					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
++					 pci_io : hose->pci_mem, ide_bar[bar],
++					 &bar_value);
++
++		pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4,
++					     bar_value);
++	}
++}
++
++#ifdef CONFIG_USE_CPCIDVI
++static void gt_setup_cpcidvi (struct pci_controller *hose,
++			      pci_dev_t dev, struct pci_config_table *entry)
++{
++	u32		  bar_value, pci_response;
++
++	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
++	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
++	pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
++	pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value);
++	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00));
++	pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0);
++	pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value);
++	pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01);
++	gt_cpcidvi_rom.base = bar_value & 0xffffff00;
++	gt_cpcidvi_rom.init = 1;
++}
++
++unsigned char gt_cpcidvi_in8(unsigned int offset)
++{
++	unsigned char	  data;
++
++	if (gt_cpcidvi_rom.init == 0) {
++		return(0);
++		}
++	data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
++	return(data);
++}
++
++void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
++{
++	unsigned int	  off;
++
++	if (gt_cpcidvi_rom.init == 0) {
++		return;
++	}
++	off = data;
++	off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
++	in8(off);
++	return;
++}
++#endif
++
++/* TODO BJW: Change this for DB64360. This was pulled from the EV64260	*/
++/* and is curently not called *. */
++#if 0
++static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
++{
++	unsigned char pin, irq;
++
++	pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
++
++	if (pin == 1) {		/* only allow INT A */
++		irq = pci_irq_swizzle[(PCI_HOST) hose->
++				      cfg_addr][PCI_DEV (dev)];
++		if (irq)
++			pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
++	}
++}
++#endif
++
++struct pci_config_table gt_config_table[] = {
++#ifdef CONFIG_USE_CPCIDVI
++	{PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA,
++	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi},
++#endif
++	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
++	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
++	{}
++};
++
++struct pci_controller pci0_hose = {
++/*    fixup_irq: gt_fixup_irq, */
++	config_table:gt_config_table,
++};
++
++struct pci_controller pci1_hose = {
++/*    fixup_irq: gt_fixup_irq, */
++	config_table:gt_config_table,
++};
++
++void pci_init_board (void)
++{
++	unsigned int command;
++#ifdef CONFIG_PCI_PNP
++	unsigned int bar;
++#endif
++#ifdef DEBUG
++	gt_pci_bus_mode_display (PCI_HOST0);
++#endif
++#ifdef CONFIG_USE_CPCIDVI
++	gt_cpcidvi_rom.init = 0;
++	gt_cpcidvi_rom.base = 0;
++#endif
++
++	pci0_hose.config_table = gt_config_table;
++	pci1_hose.config_table = gt_config_table;
++
++#ifdef CONFIG_USE_CPCIDVI
++	gt_config_table[0].config_device =  gt_setup_cpcidvi;
++#endif
++	gt_config_table[1].config_device =  gt_setup_ide;
++
++	pci0_hose.first_busno = 0;
++	pci0_hose.last_busno = 0xff;
++	local_buses[0] = pci0_hose.first_busno;
++
++	/* PCI memory space */
++	pci_set_region (pci0_hose.regions + 0,
++			CFG_PCI0_0_MEM_SPACE,
++			CFG_PCI0_0_MEM_SPACE,
++			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
++
++	/* PCI I/O space */
++	pci_set_region (pci0_hose.regions + 1,
++			CFG_PCI0_IO_SPACE_PCI,
++			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
++
++	pci_set_ops (&pci0_hose,
++		     pci_hose_read_config_byte_via_dword,
++		     pci_hose_read_config_word_via_dword,
++		     gt_read_config_dword,
++		     pci_hose_write_config_byte_via_dword,
++		     pci_hose_write_config_word_via_dword,
++		     gt_write_config_dword);
++	pci0_hose.region_count = 2;
++
++	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
++
++	pci_register_hose (&pci0_hose);
++	pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */
++	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
++	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
++	command |= PCI_COMMAND_MASTER;
++	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
++	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
++	command |= PCI_COMMAND_MEMORY;
++	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
++
++#ifdef CONFIG_PCI_PNP
++	pciauto_config_init(&pci0_hose);
++	pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
++#endif
++#ifdef CONFIG_PCI_SCAN_SHOW
++	printf("PCI:   Bus Dev VenId DevId Class Int\n");
++#endif
++	pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
++
++#ifdef DEBUG
++	gt_pci_bus_mode_display (PCI_HOST1);
++#endif
++	pci1_hose.first_busno = pci0_hose.last_busno + 1;
++	pci1_hose.last_busno = 0xff;
++	pci1_hose.current_busno = pci1_hose.first_busno;
++	local_buses[1] = pci1_hose.first_busno;
++
++	/* PCI memory space */
++	pci_set_region (pci1_hose.regions + 0,
++			CFG_PCI1_0_MEM_SPACE,
++			CFG_PCI1_0_MEM_SPACE,
++			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
++
++	/* PCI I/O space */
++	pci_set_region (pci1_hose.regions + 1,
++			CFG_PCI1_IO_SPACE_PCI,
++			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
++
++	pci_set_ops (&pci1_hose,
++		     pci_hose_read_config_byte_via_dword,
++		     pci_hose_read_config_word_via_dword,
++		     gt_read_config_dword,
++		     pci_hose_write_config_byte_via_dword,
++		     pci_hose_write_config_word_via_dword,
++		     gt_write_config_dword);
++
++	pci1_hose.region_count = 2;
++
++	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
++
++	pci_register_hose (&pci1_hose);
++
++	pciArbiterEnable (PCI_HOST1);
++	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
++
++	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
++	command |= PCI_COMMAND_MASTER;
++	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
++
++#ifdef CONFIG_PCI_PNP
++	pciauto_config_init(&pci1_hose);
++	pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar);
++#endif
++	pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno);
++
++	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
++	command |= PCI_COMMAND_MEMORY;
++	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
++
++}
++#endif /* of CONFIG_PCI */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/ppc_error_no.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/ppc_error_no.h
+--- u-boot-1.1.6/board/prodrive/p3mx/ppc_error_no.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/ppc_error_no.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,164 @@
++/*
++ * (C) Copyright 2003
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus
++ */
++#ifndef _MV_PPC_ERRNO_H
++#define _MV_PPC_ERRNO_H
++
++#define	EPERM		 1	/* Operation not permitted */
++#define	ENOENT		 2	/* No such file or directory */
++#define	ESRCH		 3	/* No such process */
++#define	EINTR		 4	/* Interrupted system call */
++#define	EIO		 5	/* I/O error */
++#define	ENXIO		 6	/* No such device or address */
++#define	E2BIG		 7	/* Arg list too long */
++#define	ENOEXEC		 8	/* Exec format error */
++#define	EBADF		 9	/* Bad file number */
++#define	ECHILD		10	/* No child processes */
++#define	EAGAIN		11	/* Try again */
++#define	ENOMEM		12	/* Out of memory */
++#define	EACCES		13	/* Permission denied */
++#define	EFAULT		14	/* Bad address */
++#define	ENOTBLK		15	/* Block device required */
++#define	EBUSY		16	/* Device or resource busy */
++#define	EEXIST		17	/* File exists */
++#define	EXDEV		18	/* Cross-device link */
++#define	ENODEV		19	/* No such device */
++#define	ENOTDIR		20	/* Not a directory */
++#define	EISDIR		21	/* Is a directory */
++#define	EINVAL		22	/* Invalid argument */
++#define	ENFILE		23	/* File table overflow */
++#define	EMFILE		24	/* Too many open files */
++#define	ENOTTY		25	/* Not a typewriter */
++#define	ETXTBSY		26	/* Text file busy */
++#define	EFBIG		27	/* File too large */
++#define	ENOSPC		28	/* No space left on device */
++#define	ESPIPE		29	/* Illegal seek */
++#define	EROFS		30	/* Read-only file system */
++#define	EMLINK		31	/* Too many links */
++#define	EPIPE		32	/* Broken pipe */
++#define	EDOM		33	/* Math argument out of domain of func */
++#define	ERANGE		34	/* Math result not representable */
++#define	EDEADLK		35	/* Resource deadlock would occur */
++#define	ENAMETOOLONG	36	/* File name too long */
++#define	ENOLCK		37	/* No record locks available */
++#define	ENOSYS		38	/* Function not implemented */
++#define	ENOTEMPTY	39	/* Directory not empty */
++#define	ELOOP		40	/* Too many symbolic links encountered */
++#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
++#define	ENOMSG		42	/* No message of desired type */
++#define	EIDRM		43	/* Identifier removed */
++#define	ECHRNG		44	/* Channel number out of range */
++#define	EL2NSYNC	45	/* Level 2 not synchronized */
++#define	EL3HLT		46	/* Level 3 halted */
++#define	EL3RST		47	/* Level 3 reset */
++#define	ELNRNG		48	/* Link number out of range */
++#define	EUNATCH		49	/* Protocol driver not attached */
++#define	ENOCSI		50	/* No CSI structure available */
++#define	EL2HLT		51	/* Level 2 halted */
++#define	EBADE		52	/* Invalid exchange */
++#define	EBADR		53	/* Invalid request descriptor */
++#define	EXFULL		54	/* Exchange full */
++#define	ENOANO		55	/* No anode */
++#define	EBADRQC		56	/* Invalid request code */
++#define	EBADSLT		57	/* Invalid slot */
++#define	EDEADLOCK	58	/* File locking deadlock error */
++#define	EBFONT		59	/* Bad font file format */
++#define	ENOSTR		60	/* Device not a stream */
++#define	ENODATA		61	/* No data available */
++#define	ETIME		62	/* Timer expired */
++#define	ENOSR		63	/* Out of streams resources */
++#define	ENONET		64	/* Machine is not on the network */
++#define	ENOPKG		65	/* Package not installed */
++#define	EREMOTE		66	/* Object is remote */
++#define	ENOLINK		67	/* Link has been severed */
++#define	EADV		68	/* Advertise error */
++#define	ESRMNT		69	/* Srmount error */
++#define	ECOMM		70	/* Communication error on send */
++#define	EPROTO		71	/* Protocol error */
++#define	EMULTIHOP	72	/* Multihop attempted */
++#define	EDOTDOT		73	/* RFS specific error */
++#define	EBADMSG		74	/* Not a data message */
++#define	EOVERFLOW	75	/* Value too large for defined data type */
++#define	ENOTUNIQ	76	/* Name not unique on network */
++#define	EBADFD		77	/* File descriptor in bad state */
++#define	EREMCHG		78	/* Remote address changed */
++#define	ELIBACC		79	/* Can not access a needed shared library */
++#define	ELIBBAD		80	/* Accessing a corrupted shared library */
++#define	ELIBSCN		81	/* .lib section in a.out corrupted */
++#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
++#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
++#define	EILSEQ		84	/* Illegal byte sequence */
++#define	ERESTART	85	/* Interrupted system call should be restarted */
++#define	ESTRPIPE	86	/* Streams pipe error */
++#define	EUSERS		87	/* Too many users */
++#define	ENOTSOCK	88	/* Socket operation on non-socket */
++#define	EDESTADDRREQ	89	/* Destination address required */
++#define	EMSGSIZE	90	/* Message too long */
++#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
++#define	ENOPROTOOPT	92	/* Protocol not available */
++#define	EPROTONOSUPPORT	93	/* Protocol not supported */
++#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
++#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
++#define	EPFNOSUPPORT	96	/* Protocol family not supported */
++#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
++#define	EADDRINUSE	98	/* Address already in use */
++#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
++#define	ENETDOWN	100	/* Network is down */
++#define	ENETUNREACH	101	/* Network is unreachable */
++#define	ENETRESET	102	/* Network dropped connection because of reset */
++#define	ECONNABORTED	103	/* Software caused connection abort */
++#define	ECONNRESET	104	/* Connection reset by peer */
++#define	ENOBUFS		105	/* No buffer space available */
++#define	EISCONN		106	/* Transport endpoint is already connected */
++#define	ENOTCONN	107	/* Transport endpoint is not connected */
++#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
++#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
++#define	ETIMEDOUT	110	/* Connection timed out */
++#define	ECONNREFUSED	111	/* Connection refused */
++#define	EHOSTDOWN	112	/* Host is down */
++#define	EHOSTUNREACH	113	/* No route to host */
++#define	EALREADY	114	/* Operation already in progress */
++#define	EINPROGRESS	115	/* Operation now in progress */
++#define	ESTALE		116	/* Stale NFS file handle */
++#define	EUCLEAN		117	/* Structure needs cleaning */
++#define	ENOTNAM		118	/* Not a XENIX named type file */
++#define	ENAVAIL		119	/* No XENIX semaphores available */
++#define	EISNAM		120	/* Is a named type file */
++#define	EREMOTEIO	121	/* Remote I/O error */
++#define	EDQUOT		122	/* Quota exceeded */
++
++#define	ENOMEDIUM	123	/* No medium found */
++#define	EMEDIUMTYPE	124	/* Wrong medium type */
++
++/* Should never be seen by user programs */
++#define ERESTARTSYS	512
++#define ERESTARTNOINTR	513
++#define ERESTARTNOHAND	514	/* restart if no handler.. */
++#define ENOIOCTLCMD	515	/* No ioctl command */
++
++#define _LAST_ERRNO	515
++
++#endif
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/sdram_init.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/sdram_init.c
+--- u-boot-1.1.6/board/prodrive/p3mx/sdram_init.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/sdram_init.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,434 @@
++/*
++ * (C) Copyright 2001
++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*************************************************************************
++ * adaption for the Marvell DB64460 Board
++ * Ingo Assmus (ingo.assmus@keymile.com)
++ *************************************************************************/
++
++/* sdram_init.c - automatic memory sizing */
++
++#include <common.h>
++#include <74xx_7xx.h>
++#include "../../Marvell/include/memory.h"
++#include "../../Marvell/include/pci.h"
++#include "../../Marvell/include/mv_gen_reg.h"
++#include <net.h>
++
++#include "eth.h"
++#include "mpsc.h"
++#include "../../Marvell/common/i2c.h"
++#include "64460.h"
++#include "mv_regs.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#undef	DEBUG
++#define MAP_PCI
++
++#ifdef DEBUG
++#define DP(x) x
++#else
++#define DP(x)
++#endif
++
++int set_dfcdlInit (void);	/* setup delay line of Mv64460 */
++int mvDmaIsChannelActive (int);
++int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
++int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
++
++#define D_CACHE_FLUSH_LINE(addr, offset)				\
++	{								\
++		__asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
++	}
++
++int memory_map_bank (unsigned int bankNo,
++		     unsigned int bankBase, unsigned int bankLength)
++{
++#ifdef MAP_PCI
++	PCI_HOST host;
++#endif
++
++#ifdef DEBUG
++	if (bankLength > 0) {
++		printf ("mapping bank %d at %08x - %08x\n",
++			bankNo, bankBase, bankBase + bankLength - 1);
++	} else {
++		printf ("unmapping bank %d\n", bankNo);
++	}
++#endif
++
++	memoryMapBank (bankNo, bankBase, bankLength);
++
++#ifdef MAP_PCI
++	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
++		const int features =
++			PREFETCH_ENABLE |
++			DELAYED_READ_ENABLE |
++			AGGRESSIVE_PREFETCH |
++			READ_LINE_AGGRESSIVE_PREFETCH |
++			READ_MULTI_AGGRESSIVE_PREFETCH |
++			MAX_BURST_4 | PCI_NO_SWAP;
++
++		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
++
++		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
++				       bankLength);
++
++		pciSetRegionFeatures (host, bankNo, features, bankBase,
++				      bankLength);
++	}
++#endif
++
++	return 0;
++}
++
++/*
++ * Check memory range for valid RAM. A simple memory test determines
++ * the actually available RAM size between addresses `base' and
++ * `base + maxsize'. Some (not all) hardware errors are detected:
++ * - short between address lines
++ * - short between data lines
++ */
++long int dram_size (long int *base, long int maxsize)
++{
++	volatile long int *addr, *b = base;
++	long int cnt, val, save1, save2;
++
++#define STARTVAL (1<<20)	/* start test at 1M */
++	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
++	     cnt <<= 1) {
++		addr = base + cnt;	/* pointer arith! */
++
++		save1 = *addr;	/* save contents of addr */
++		save2 = *b;	/* save contents of base */
++
++		*addr = cnt;	/* write cnt to addr */
++		*b = 0;		/* put null at base */
++
++		/* check at base address */
++		if ((*b) != 0) {
++			*addr = save1;	/* restore *addr */
++			*b = save2;	/* restore *b */
++			return (0);
++		}
++		val = *addr;	/* read *addr */
++		val = *addr;	/* read *addr */
++
++		*addr = save1;
++		*b = save2;
++
++		if (val != cnt) {
++			DP (printf
++			    ("Found %08x  at Address %08x (failure)\n",
++			     (unsigned int) val, (unsigned int) addr));
++			/* fix boundary condition.. STARTVAL means zero */
++			if (cnt == STARTVAL / sizeof (long))
++				cnt = 0;
++			return (cnt * sizeof (long));
++		}
++	}
++
++	return maxsize;
++}
++
++#define SDRAM_NORMAL			0x0
++#define SDRAM_PRECHARGE_ALL		0x1
++#define SDRAM_REFRESH_ALL		0x2
++#define SDRAM_MODE_REG_SETUP		0x3
++#define SDRAM_XTEN_MODE_REG_SETUP	0x4
++#define SDRAM_NOP			0x5
++#define SDRAM_SELF_REFRESH		0x7
++
++long int initdram (int board_type)
++{
++	int tmp;
++	int start;
++	ulong size;
++	ulong memSpaceAttr;
++	ulong dest;
++
++	/* first disable all banks */
++	memory_map_bank(0, 0, 0);
++	memory_map_bank(1, 0, 0);
++	memory_map_bank(2, 0, 0);
++	memory_map_bank(3, 0, 0);
++
++	/* calibrate delay lines */
++	set_dfcdlInit();
++
++	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP);		/* 0x1418 */
++	do {
++		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
++	} while(tmp != 0x0);
++
++	/* SDRAM controller configuration */
++#ifdef CONFIG_MV64460_ECC
++	GT_REG_WRITE(MV64460_SDRAM_CONFIG,		0x58201400);	/* 0x1400 */
++#else
++	GT_REG_WRITE(MV64460_SDRAM_CONFIG,		0x58200400);	/* 0x1400 */
++#endif
++	GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW,	0xC3000540);	/* 0x1404  */
++	GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH,	0x0300F777);	/* 0x1424 */
++	GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW,	0x01712220);	/* 0x1408 */
++	GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D);	/* 0x140C */
++	GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL,	0x00000012);	/* 0x1410 */
++	GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL,	0x00000001);	/* 0x1414 */
++
++	/* SDRAM drive strength */
++	GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */
++	GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */
++	GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000);	    /* 0x14C4 */
++	GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008);	    /* 0x14C4 */
++
++	/* setup SDRAM device registers */
++
++	/* precharge all */
++	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL);	/* 0x1418 */
++	do {
++		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
++	} while(tmp != 0x0);
++
++	/* enable DLL */
++	GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000);			/* 0x1420 */
++	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP);	/* 0x1418 */
++	do {
++		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
++	} while(tmp != 0x0);
++
++	/* reset DLL */
++	GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132);	/* 0x141C */
++	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP);	/* 0x1418 */
++	do {
++		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
++	} while(tmp != 0x0);
++
++	/* precharge all */
++	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL);	/* 0x1418 */
++	do {
++		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
++	} while(tmp != 0x0);
++
++	/* wait for 2 auto refresh commands */
++	udelay(20);
++
++	/* un-reset DLL */
++	GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032);	/* 0x141C */
++	GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP);	/* 0x1418 */
++	do {
++		tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
++	} while(tmp != 0x0);
++
++	/* wait 200 cycles */
++	udelay(2);  /* FIXME  make this dynamic for the system clock */
++
++	/* SDRAM init done */
++	memory_map_bank(0, CFG_SDRAM_BASE,  (256 << 20));
++#ifdef CFG_SDRAM1_BASE
++	memory_map_bank(1, CFG_SDRAM1_BASE, (256 << 20));
++#endif
++
++	/* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4
++	 */
++	tmp = GTREGREAD(MV64460_D_UNIT_MMASK);				/* 0x14B0 */
++	GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2);
++
++	start = (0 << 20);
++#ifdef CONFIG_P3M750
++	size = (512 << 20);
++#elif defined (CONFIG_P3M7448)
++	size = (128 << 20);
++#endif
++
++#ifdef CONFIG_MV64460_ECC
++	memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8;
++	mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size);
++	for (dest = start; dest < start + size; dest += _8M) {
++		mvDmaTransfer (0, start, dest, _8M,
++			       BIT8 /*DMA_DTL_128BYTES */  |
++			       BIT3 /*DMA_HOLD_SOURCE_ADDR */ |
++			       BIT11 /*DMA_BLOCK_TRANSFER_MODE */ );
++		while (mvDmaIsChannelActive (0));
++	}
++#endif
++
++	return (size);
++}
++
++void board_add_ram_info(int use_default)
++{
++	u32 val;
++
++	puts(" (CL=");
++	switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) {
++	case 0x2:
++		puts("2");
++		break;
++	case 0x3:
++		puts("3");
++		break;
++	case 0x5:
++		puts("1.5");
++		break;
++	case 0x6:
++		puts("2.5");
++		break;
++	}
++
++	val = GTREGREAD(MV64460_SDRAM_CONFIG);
++
++	puts(", ECC ");
++	if (val & 0x00001000)
++		puts("enabled)");
++	else
++		puts("not enabled)");
++}
++
++/*
++ * mvDmaIsChannelActive - Check if IDMA channel is active
++ *
++ * channel	= IDMA channel number from 0 to 7
++ */
++int mvDmaIsChannelActive (int channel)
++{
++	ulong data;
++
++	data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel);
++	if (data & BIT14)	/* activity status */
++		return 1;
++
++	return 0;
++}
++
++/*
++ * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
++ *			 map.
++ *
++ * memSpace	= IDMA memory window number from 0 to 7
++ * trg_if	= Target interface:
++ *		  0x0 DRAM
++ *		  0x1 Device Bus
++ *		  0x2 Integrated SDRAM (or CPU bus 60x only)
++ *		  0x3 PCI0
++ *		  0x4 PCI1
++ * attr		= IDMA attributes (see MV datasheet)
++ * base_addr	= Sets up memory window for transfers
++ *
++ */
++int mvDmaSetMemorySpace (ulong memSpace,
++			 ulong trg_if,
++			 ulong attr, ulong base_addr, ulong size)
++{
++	ulong temp;
++
++	/* The base address must be aligned to the size.  */
++	if (base_addr % size != 0)
++		return 0;
++
++	if (size >= 0x10000) {	 /* 64K */
++		size &= 0xffff0000;
++		base_addr = (base_addr & 0xffff0000);
++		/* Set the new attributes */
++		GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
++			      (base_addr | trg_if | attr));
++		GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
++			      (size - 1) & 0xffff0000);
++		temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
++		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
++			      (temp & ~(BIT0 << memSpace)));
++		return 1;
++	}
++
++	return 0;
++}
++
++/*
++ * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4
++ *		   DMA channels.
++ *
++ * channel	= IDMA channel number from 0 to 3
++ * destAddr	= Destination address
++ * sourceAddr	= Source address
++ * size		= Size in bytes
++ * command	= See MV datasheet
++ *
++ */
++int mvDmaTransfer (int channel, ulong sourceAddr,
++		   ulong destAddr, ulong size, ulong command)
++{
++	ulong engOffReg = 0;	/* Engine Offset Register */
++
++	if (size > 0xffff)
++		command = command | BIT31;	/* DMA_16M_DESCRIPTOR_MODE */
++	command = command | ((command >> 6) & 0x7);
++	engOffReg = channel * 4;
++	GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size);
++	GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr);
++	GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr);
++	command = command |
++		BIT12	|			/* DMA_CHANNEL_ENABLE */
++		BIT9;				/* DMA_NON_CHAIN_MODE */
++	/* Activate DMA channel By writting to mvDmaControlRegister */
++	GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
++	return 1;
++}
++
++/****************************************************************************************
++ *			       SDRAM INIT						*
++ *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
++ *		 This procedure fits only the Atlantis					*
++ *											*
++ ***************************************************************************************/
++
++/****************************************************************************************
++ *			       DFCDL initialize MV643xx Design Considerations		*
++ *											*
++ ***************************************************************************************/
++int set_dfcdlInit (void)
++{
++	int i;
++
++	/* Values from MV64460 User Manual */
++	unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083,
++				     0x000000c4, 0x00000105, 0x00000146, 0x00000187,
++				     0x000001c8, 0x00000209, 0x0000024a, 0x0000028b,
++				     0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f,
++				     0x000003d0, 0x00000411, 0x00000452, 0x00000493,
++				     0x000004d4, 0x00000515, 0x00000556, 0x00000597,
++				     0x000005d8, 0x00000619, 0x0000065a, 0x0000069b,
++				     0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f,
++				     0x000007e0, 0x00000821, 0x00000862, 0x000008a3,
++				     0x000008e4, 0x00000925, 0x00000966, 0x000009a7,
++				     0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab,
++				     0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf,
++				     0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3,
++				     0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7,
++				     0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb,
++				     0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf };
++
++	for (i = 0; i < 64; i++)
++		GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]);
++	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
++
++	return (0);
++}
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/serial.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.c
+--- u-boot-1.1.6/board/prodrive/p3mx/serial.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,107 @@
++/*
++ * (C) Copyright 2001
++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * modified for marvell db64360 eval board by
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * modified for cpci750 board by
++ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * serial.c - serial support for esd cpci750 board
++ */
++
++/* supports the MPSC */
++
++#include <common.h>
++#include <command.h>
++#include "../../Marvell/include/memory.h"
++#include "serial.h"
++
++#include "mpsc.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int serial_init (void)
++{
++	mpsc_init (gd->baudrate);
++
++	return (0);
++}
++
++void serial_putc (const char c)
++{
++	if (c == '\n')
++		mpsc_putchar ('\r');
++
++	mpsc_putchar (c);
++}
++
++int serial_getc (void)
++{
++	return mpsc_getchar ();
++}
++
++int serial_tstc (void)
++{
++	return mpsc_test_char ();
++}
++
++void serial_setbrg (void)
++{
++	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
++}
++
++
++void serial_puts (const char *s)
++{
++	while (*s) {
++		serial_putc (*s++);
++	}
++}
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++void kgdb_serial_init (void)
++{
++}
++
++void putDebugChar (int c)
++{
++	serial_putc (c);
++}
++
++void putDebugStr (const char *str)
++{
++	serial_puts (str);
++}
++
++int getDebugChar (void)
++{
++	return serial_getc ();
++}
++
++void kgdb_interruptible (int yes)
++{
++	return;
++}
++#endif /* CFG_CMD_KGDB */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/serial.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.h
+--- u-boot-1.1.6/board/prodrive/p3mx/serial.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,89 @@
++/*
++ * (C) Copyright 2001
++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * modified for marvell db64360 eval board by
++ * Ingo Assmus <ingo.assmus@keymile.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/* serial.h - mostly useful for DUART serial_init in serial.c */
++
++#ifndef __SERIAL_H__
++#define __SERIAL_H__
++
++#if 0
++
++#define B230400         1
++#define B115200         2
++#define B57600          4
++#define B38400          82
++#define B19200          163
++#define B9600           24
++#define B4800           651
++#define B2400           1302
++#define B1200           2604
++#define B600            5208
++#define B300            10417
++#define B150            20833
++#define B110            28409
++#define BDEFAULT        B115200
++
++				/* this stuff is important to initialize
++				the DUART channels */
++
++#define	Scale		0x01L		/* distance between port addresses */
++#define	COM1		0x000003f8		/* Keyboard */
++#define COM2		0x000002f8		/* Host */
++
++
++/* Port Definitions relative to base COM port addresses */
++#define DataIn	(0x00*Scale)	/* data input port */
++#define DataOut	(0x00*Scale)	/* data output port */
++#define BaudLsb	(0x00*Scale)	/* baud rate divisor least significant byte */
++#define BaudMsb	(0x01*Scale)	/* baud rate divisor most significant byte */
++#define	Ier	(0x01*Scale)	/* interrupt enable register */
++#define	Iir	(0x02*Scale)	/* interrupt identification register */
++#define	Lcr	(0x03*Scale)	/* line control register */
++#define	Mcr	(0x04*Scale)	/* modem control register */
++#define	Lsr	(0x05*Scale)	/* line status register */
++#define	Msr	(0x06*Scale)	/* modem status register */
++
++/* Bit Definitions for above ports */
++#define LcrDlab	0x80	/* b7:	 enable baud rate divisor registers */
++#define	LcrDflt	0x03	/* b6-0: no parity, 1 stop, 8 data */
++
++#define	McrRts	0x02	/* b1:	request to send (I am ready to xmit) */
++#define	McrDtr	0x01	/* b0:	data terminal ready (I am alive ready to rcv) */
++#define	McrDflt	(McrRts|McrDtr)
++
++#define LsrTxD	0x6000	/* b5: transmit holding register empty (i.e. xmit OK!)*/
++			/* b6: transmitter empty */
++#define LsrRxD	0x0100	/* b0: received data ready (i.e. got a byte!) */
++
++#define	MsrRi	0x0040	/* b6: ring indicator (other guy is ready to rcv) */
++#define	MsrDsr	0x0020	/* b5: data set ready (other guy is alive ready to rcv */
++#define	MsrCts	0x0010	/* b4: clear to send (other guy is ready to rcv) */
++
++#define IerRda	0xf	/* b0: Enable received data available interrupt */
++
++#endif
++
++#endif /* __SERIAL_H__ */
+diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/u-boot.lds u-boot-1.1.6-fsl-1/board/prodrive/p3mx/u-boot.lds
+--- u-boot-1.1.6/board/prodrive/p3mx/u-boot.lds	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/u-boot.lds	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,138 @@
++/*
++ * (C) Copyright 2001
++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
++ */
++
++OUTPUT_ARCH(powerpc)
++SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
++/* Do we need any of these for elf?
++   __DYNAMIC = 0;    */
++SECTIONS
++{
++  /* Read-only sections, merged into text segment: */
++  . = + SIZEOF_HEADERS;
++  .interp : { *(.interp) }
++  .hash          : { *(.hash)		}
++  .dynsym        : { *(.dynsym)		}
++  .dynstr        : { *(.dynstr)		}
++  .rel.text      : { *(.rel.text)		}
++  .rela.text     : { *(.rela.text) 	}
++  .rel.data      : { *(.rel.data)		}
++  .rela.data     : { *(.rela.data) 	}
++  .rel.rodata    : { *(.rel.rodata) 	}
++  .rela.rodata   : { *(.rela.rodata) 	}
++  .rel.got       : { *(.rel.got)		}
++  .rela.got      : { *(.rela.got)		}
++  .rel.ctors     : { *(.rel.ctors)	}
++  .rela.ctors    : { *(.rela.ctors)	}
++  .rel.dtors     : { *(.rel.dtors)	}
++  .rela.dtors    : { *(.rela.dtors)	}
++  .rel.bss       : { *(.rel.bss)		}
++  .rela.bss      : { *(.rela.bss)		}
++  .rel.plt       : { *(.rel.plt)		}
++  .rela.plt      : { *(.rela.plt)		}
++  .init          : { *(.init)	}
++  .plt : { *(.plt) }
++  .text      :
++  {
++    cpu/74xx_7xx/start.o	(.text)
++
++/* store the environment in a seperate sector in the boot flash */
++/*    . = env_offset; */
++/*    common/environment.o(.text) */
++
++    *(.text)
++    *(.fixup)
++    *(.got1)
++  }
++  _etext = .;
++  PROVIDE (etext = .);
++  .rodata    :
++  {
++    *(.rodata)
++    *(.rodata1)
++    *(.rodata.str1.4)
++    *(.eh_frame)
++  }
++  .fini      : { *(.fini)    } =0
++  .ctors     : { *(.ctors)   }
++  .dtors     : { *(.dtors)   }
++
++  /* Read-write section, merged into data segment: */
++  . = (. + 0x00FF) & 0xFFFFFF00;
++  _erotext = .;
++  PROVIDE (erotext = .);
++  .reloc   :
++  {
++    *(.got)
++    _GOT2_TABLE_ = .;
++    *(.got2)
++    _FIXUP_TABLE_ = .;
++    *(.fixup)
++  }
++  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
++  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
++
++  .data    :
++  {
++    *(.data)
++    *(.data1)
++    *(.sdata)
++    *(.sdata2)
++    *(.dynamic)
++    CONSTRUCTORS
++  }
++  _edata  =  .;
++  PROVIDE (edata = .);
++
++  . = .;
++  __u_boot_cmd_start = .;
++  .u_boot_cmd : { *(.u_boot_cmd) }
++  __u_boot_cmd_end = .;
++
++
++  . = .;
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  . = ALIGN(256);
++  __init_begin = .;
++  .text.init : { *(.text.init) }
++  .data.init : { *(.data.init) }
++  . = ALIGN(256);
++  __init_end = .;
++
++  __bss_start = .;
++  .bss       :
++  {
++   *(.sbss) *(.scommon)
++   *(.dynbss)
++   *(.bss)
++   *(COMMON)
++  }
++  _end = . ;
++  PROVIDE (end = .);
++}
+diff -Naupr u-boot-1.1.6/board/tqm5200/cam5200_flash.c u-boot-1.1.6-fsl-1/board/tqm5200/cam5200_flash.c
+--- u-boot-1.1.6/board/tqm5200/cam5200_flash.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/tqm5200/cam5200_flash.c	2006-11-30 12:34:13.000000000 -0600
+@@ -759,7 +759,7 @@ unsigned long flash_init(void)
+ 
+ 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ 			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+-					i, size_b[i], size_b[i] << 20);
++					i+1, size_b[i], size_b[i] << 20);
+ 			flash_info[i].sector_count = -1;
+ 			flash_info[i].size = 0;
+ 		}
+diff -Naupr u-boot-1.1.6/board/tqm5200/tqm5200.c u-boot-1.1.6-fsl-1/board/tqm5200/tqm5200.c
+--- u-boot-1.1.6/board/tqm5200/tqm5200.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/tqm5200/tqm5200.c	2006-11-30 12:34:13.000000000 -0600
+@@ -289,7 +289,7 @@ int checkboard (void)
+ #elif defined(CONFIG_TB5200)
+ # define CARRIER_NAME	"TB5200"
+ #elif defined(CONFIG_CAM5200)
+-# define CARRIER_NAME	"Cam5200"
++# define CARRIER_NAME	"CAM5200"
+ #elif defined(CONFIG_FO300)
+ # define CARRIER_NAME	"FO300"
+ #else
+@@ -341,9 +341,7 @@ void pci_init_board(void)
+ #define SM501_GPIO_DATA_DIR_HIGH	0x0001000CUL
+ #define SM501_GPIO_DATA_HIGH		0x00010004UL
+ #define SM501_GPIO_51			0x00080000UL
+-#else
+-#define GPIO_PSC1_4	0x01000000UL
+-#endif
++#endif /* CONFIG MINIFAP */
+ 
+ void init_ide_reset (void)
+ {
+@@ -381,9 +379,9 @@ void ide_set_reset (int idereset)
+ 	}
+ #else
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 	} else {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
+ 	}
+ #endif
+ }
+diff -Naupr u-boot-1.1.6/board/tqm834x/pci.c u-boot-1.1.6-fsl-1/board/tqm834x/pci.c
+--- u-boot-1.1.6/board/tqm834x/pci.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/tqm834x/pci.c	2006-11-10 11:24:29.000000000 -0600
+@@ -69,17 +69,17 @@ void
+ pci_init_board(void)
+ {
+ 	volatile immap_t *	immr;
+-	volatile clk8349_t *	clk;
+-	volatile law8349_t *	pci_law;
+-	volatile pot8349_t *	pci_pot;
+-	volatile pcictrl8349_t *	pci_ctrl;
+-	volatile pciconf8349_t *	pci_conf;
++	volatile clk83xx_t *	clk;
++	volatile law83xx_t *	pci_law;
++	volatile pot83xx_t *	pci_pot;
++	volatile pcictrl83xx_t *	pci_ctrl;
++	volatile pciconf83xx_t *	pci_conf;
+ 	u16 reg16;
+ 	u32 reg32;
+ 	struct	pci_controller * hose;
+ 
+-	immr = (immap_t *)CFG_IMMRBAR;
+-	clk = (clk8349_t *)&immr->clk;
++	immr = (immap_t *)CFG_IMMR;
++	clk = (clk83xx_t *)&immr->clk;
+ 	pci_law = immr->sysconf.pcilaw;
+ 	pci_pot = immr->ios.pot;
+ 	pci_ctrl = immr->pci_ctrl;
+@@ -186,8 +186,8 @@ pci_init_board(void)
+ 	hose->region_count = 3;
+ 
+ 	pci_setup_indirect(hose,
+-			   (CFG_IMMRBAR+0x8300),
+-			   (CFG_IMMRBAR+0x8304));
++			   (CFG_IMMR+0x8300),
++			   (CFG_IMMR+0x8304));
+ 
+ 	pci_register_hose(hose);
+ 
+diff -Naupr u-boot-1.1.6/board/tqm834x/tqm834x.c u-boot-1.1.6-fsl-1/board/tqm834x/tqm834x.c
+--- u-boot-1.1.6/board/tqm834x/tqm834x.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/tqm834x/tqm834x.c	2006-11-10 11:24:29.000000000 -0600
+@@ -69,7 +69,7 @@ static void set_cs_config(short cs, long
+ static void set_ddr_config(void);
+ 
+ /* Local variable */
+-static volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
++static volatile immap_t *im = (immap_t *)CFG_IMMR;
+ 
+ /**************************************************************************
+  * Board initialzation after relocation to RAM. Used to detect the number
+@@ -147,7 +147,7 @@ int checkboard (void)
+ 	volatile immap_t * immr;
+ 	u32 w, f;
+ 
+-	immr = (immap_t *)CFG_IMMRBAR;
++	immr = (immap_t *)CFG_IMMR;
+ 	if (!(immr->reset.rcwh & RCWH_PCIHOST)) {
+ 		printf("PCI:   NOT in host mode..?!\n");
+ 		return 0;
+diff -Naupr u-boot-1.1.6/board/v38b/ethaddr.c u-boot-1.1.6-fsl-1/board/v38b/ethaddr.c
+--- u-boot-1.1.6/board/v38b/ethaddr.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/v38b/ethaddr.c	2006-11-10 11:24:29.000000000 -0600
+@@ -1,5 +1,4 @@
+ /*
+- *
+  * (C) Copyright 2006
+  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+  *
+@@ -25,48 +24,13 @@
+ #include <common.h>
+ #include <mpc5xxx.h>
+ 
+-#define GPIO_ENABLE	(MPC5XXX_WU_GPIO)
+-
+-/* Open Drain Emulation Register */
+-#define GPIO_ODR	(MPC5XXX_WU_GPIO + 0x04)
+-
+-/* Data Direction Register */
+-#define GPIO_DDR	(MPC5XXX_WU_GPIO + 0x08)
+-
+-/* Data Value Out Register */
+-#define GPIO_DVOR	(MPC5XXX_WU_GPIO + 0x0C)
+-
+-/* Interrupt Enable Register */
+-#define GPIO_IER	(MPC5XXX_WU_GPIO + 0x10)
+-
+-/* Individual Interrupt Enable Register */
+-#define GPIO_IIER	(MPC5XXX_WU_GPIO + 0x14)
+-
+-/* Interrupt Type Register */
+-#define GPIO_ITR	(MPC5XXX_WU_GPIO + 0x18)
+-
+-/* Master Enable Register */
+-#define GPIO_MER	(MPC5XXX_WU_GPIO + 0x1C)
+-
+-/* Data Input Value Register */
+-#define GPIO_DIVR	(MPC5XXX_WU_GPIO + 0x20)
+-
+-/* Status Register */
+-#define GPIO_SR		(MPC5XXX_WU_GPIO + 0x24)
+-
+-#define PSC6_0		0x10000000
+-#define WKUP_7		0x80000000
+-
+-/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */
+-#define GPIO_PIN	PSC6_0
++/* For the V38B board the pin is GPIO_PSC_6 */
++#define GPIO_PIN	GPIO_PSC6_0
+ 
+ #define NO_ERROR	0
+ #define ERR_NO_NUMBER	1
+ #define ERR_BAD_NUMBER	2
+ 
+-typedef volatile unsigned long GPIO_REG;
+-typedef GPIO_REG *GPIO_REG_PTR;
+-
+ static int is_high(void);
+ static int check_device(void);
+ static void io_out(int value);
+@@ -79,33 +43,34 @@ static void write_byte(unsigned char com
+ void read_2501_memory(unsigned char *psernum, unsigned char *perr);
+ void board_get_enetaddr(uchar *enetaddr);
+ 
++
+ static int is_high()
+ {
+-	return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN);
++	return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
+ }
+ 
+ static void io_out(int value)
+ {
+ 	if (value)
+-		*((vu_long *) GPIO_DVOR) |= GPIO_PIN;
++		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
+ 	else
+-		*((vu_long *) GPIO_DVOR) &= ~GPIO_PIN;
++		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
+ }
+ 
+ static void io_input()
+ {
+-	*((vu_long *) GPIO_DDR) &= ~GPIO_PIN;
++	*((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
+ 	udelay(3);	/* allow input to settle */
+ }
+ 
+ static void io_output()
+ {
+-	*((vu_long *) GPIO_DDR) |= GPIO_PIN;
++	*((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
+ }
+ 
+ static void init_gpio()
+ {
+-	*((vu_long *) GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
++	*((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
+ }
+ 
+ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
+@@ -117,8 +82,8 @@ void read_2501_memory(unsigned char *pse
+ 	*perr = 0;
+ 	crcval = 0;
+ 
+-	for (i=0; i<NBYTES; i++)
+-
++	for (i = 0; i < NBYTES; i++)
++		buf[i] = 0;
+ 
+ 	if (!check_device())
+ 		*perr = ERR_NO_NUMBER;
+@@ -130,10 +95,10 @@ void read_2501_memory(unsigned char *pse
+ 		write_byte(0x00);
+ 		read_byte(&crcval);		/* Read CRC of address and command */
+ 
+-		for (i=0; i<NBYTES; i++)
+-			read_byte( &buf[i] );
++		for (i = 0; i < NBYTES; i++)
++			read_byte(&buf[i]);
+ 	}
+-	if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) {
++	if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
+ 		*perr = ERR_BAD_NUMBER;
+ 		psernum[0] = 0x00;
+ 		psernum[1] = 0xE0;
+@@ -141,8 +106,7 @@ void read_2501_memory(unsigned char *pse
+ 		psernum[3] = 0xFF;
+ 		psernum[4] = 0xFF;
+ 		psernum[5] = 0xFF;
+-	}
+-	else {
++	} else {
+ 		psernum[0] = 0x00;
+ 		psernum[1] = 0xE0;
+ 		psernum[2] = 0xEE;
+@@ -173,27 +137,23 @@ static void write_byte(unsigned char com
+ {
+ 	char i;
+ 
+-	for (i=0; i<8; i++) {
++	for (i = 0; i < 8; i++) {
+ 		/* 1 us to 15 us low pulse starts bit slot */
+ 		/* Start with high pulse for 3 us */
+ 		io_input();
+-
+ 		udelay(3);
+ 
+ 		io_out(0);
+ 		io_output();
+-
+ 		udelay(3);
+ 
+ 		if (command & 0x01) {
+ 			/* 60 us high for 1-bit */
+ 			io_input();
+ 			udelay(60);
+-		}
+-		else {
++		} else
+ 			/* 60 us low for 0-bit */
+ 			udelay(60);
+-		}
+ 		/*  Leave pin as input */
+ 		io_input();
+ 
+@@ -201,11 +161,11 @@ static void write_byte(unsigned char com
+ 	}
+ }
+ 
+-static void read_byte(unsigned char  *data)
++static void read_byte(unsigned char *data)
+ {
+ 	unsigned char i, rdat = 0;
+ 
+-	for (i=0; i<8; i++) {
++	for (i = 0; i < 8; i++) {
+ 		/* read one bit from one-wire device */
+ 
+ 		/* 1 - 15 us low starts bit slot */
+@@ -233,22 +193,21 @@ static void read_byte(unsigned char  *da
+ 
+ void board_get_enetaddr(uchar *enetaddr)
+ {
+-	unsigned char sn[6], err=NO_ERROR;
++	unsigned char sn[6], err = NO_ERROR;
+ 
+ 	init_gpio();
+ 
+ 	read_2501_memory(sn, &err);
+ 
+ 	if (err == NO_ERROR) {
+-		sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
++		sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+ 				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
+ 		printf("MAC address: %s\n", enetaddr);
+-		setenv("ethaddr", enetaddr);
+-	}
+-	else {
+-		sprintf(enetaddr, "00:01:02:03:04:05");
++		setenv("ethaddr", (char *)enetaddr);
++	} else {
++		sprintf((char *)enetaddr, "00:01:02:03:04:05");
+ 		printf("Error reading MAC address.\n");
+ 		printf("Setting default to %s\n", enetaddr);
+-		setenv("ethaddr", enetaddr);
++		setenv("ethaddr", (char *)enetaddr);
+ 	}
+ }
+diff -Naupr u-boot-1.1.6/board/v38b/u-boot.lds u-boot-1.1.6-fsl-1/board/v38b/u-boot.lds
+--- u-boot-1.1.6/board/v38b/u-boot.lds	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/v38b/u-boot.lds	2006-11-10 11:24:29.000000000 -0600
+@@ -61,6 +61,7 @@ SECTIONS
+     *(.rodata)
+     *(.rodata1)
+     *(.rodata.str1.4)
++    *(.eh_frame)
+   }
+   .fini      : { *(.fini)    } =0
+   .ctors     : { *(.ctors)   }
+@@ -93,11 +94,13 @@ SECTIONS
+   _edata  =  .;
+   PROVIDE (edata = .);
+ 
++  . = .;
+   __u_boot_cmd_start = .;
+   .u_boot_cmd : { *(.u_boot_cmd) }
+   __u_boot_cmd_end = .;
+ 
+ 
++  . = .;
+   __start___ex_table = .;
+   __ex_table : { *(__ex_table) }
+   __stop___ex_table = .;
+diff -Naupr u-boot-1.1.6/board/v38b/v38b.c u-boot-1.1.6-fsl-1/board/v38b/v38b.c
+--- u-boot-1.1.6/board/v38b/v38b.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/board/v38b/v38b.c	2006-11-10 11:24:29.000000000 -0600
+@@ -28,43 +28,44 @@
+ #include <mpc5xxx.h>
+ #include <asm/processor.h>
+ 
++
+ #ifndef CFG_RAMBOOT
+ static void sdram_start(int hi_addr)
+ {
+ 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+ 
+ 	/* unlock mode register */
+-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
++	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ 	__asm__ volatile ("sync");
+ 
+ 	/* precharge all banks */
+-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
++	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ 	__asm__ volatile ("sync");
+ 
+ #if SDRAM_DDR
+ 	/* set mode register: extended mode */
+-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
++	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ 	__asm__ volatile ("sync");
+ 
+ 	/* set mode register: reset DLL */
+-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
++	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ 	__asm__ volatile ("sync");
+ #endif /* SDRAM_DDR */
+ 
+ 	/* precharge all banks */
+-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
++	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ 	__asm__ volatile ("sync");
+ 
+ 	/* auto refresh */
+-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
++	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ 	__asm__ volatile ("sync");
+ 
+ 	/* set mode register */
+-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
++	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ 	__asm__ volatile ("sync");
+ 
+ 	/* normal operation */
+-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
++	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ 	__asm__ volatile ("sync");
+ }
+ #endif /* !CFG_RAMBOOT */
+@@ -80,18 +81,18 @@ long int initdram(int board_type)
+ 	ulong test1, test2;
+ 
+ 	/* setup SDRAM chip selects */
+-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
+-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
++	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
++	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
+ 	__asm__ volatile ("sync");
+ 
+ 	/* setup config registers */
+-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
++	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
++	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ 	__asm__ volatile ("sync");
+ 
+ #if SDRAM_DDR
+ 	/* set tap delay */
+-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
++	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ 	__asm__ volatile ("sync");
+ #endif /* SDRAM_DDR */
+ 
+@@ -112,20 +113,20 @@ long int initdram(int board_type)
+ 
+ 	/* set SDRAM CS0 size according to the amount of RAM found */
+ 	if (dramsize > 0)
+-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
++		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+ 	else
+-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
++		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ 
+ 	/* let SDRAM CS1 start right after CS0 */
+-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
++	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+ 
+ 	/* find RAM size using SDRAM CS1 only */
+ 	if (!dramsize)
+ 		sdram_start(0);
+-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
++	test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+ 	if (!dramsize) {
+ 		sdram_start(1);
+-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
++		test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+ 	}
+ 	if (test1 > test2) {
+ 		sdram_start(0);
+@@ -139,22 +140,22 @@ long int initdram(int board_type)
+ 
+ 	/* set SDRAM CS1 size according to the amount of RAM found */
+ 	if (dramsize2 > 0)
+-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
++		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize
+ 			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+ 	else
+-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
++		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+ 
+ #else /* CFG_RAMBOOT */
+ 
+ 	/* retrieve size of memory connected to SDRAM CS0 */
+-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
++	dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ 	if (dramsize >= 0x13)
+ 		dramsize = (1 << (dramsize - 0x13)) << 20;
+ 	else
+ 		dramsize = 0;
+ 
+ 	/* retrieve size of memory connected to SDRAM CS1 */
+-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
++	dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ 	if (dramsize2 >= 0x13)
+ 		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ 	else
+@@ -176,7 +177,7 @@ long int initdram(int board_type)
+ 	if ((SVR_MJREV(svr) >= 2) &&
+ 		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+ 
+-		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
++		*(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04;
+ 		__asm__ volatile ("sync");
+ 	}
+ 
+@@ -194,27 +195,42 @@ int checkboard (void)
+ int board_early_init_r(void)
+ {
+ 	/*
+-	 * Now, when we are in RAM, enable flash write access for detection process.
+-	 * Note that CS_BOOT cannot be cleared when executing in flash.
++	 * Now, when we are in RAM, enable flash write access for the
++	 * detection process.  Note that CS_BOOT cannot be cleared when
++	 * executing in flash.
++	 */
++	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
++
++#ifdef CONFIG_HW_WATCHDOG
++	/*
++	 * Enable and configure the direction (output) of PSC3_9 - watchdog
++	 * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
++	 * Manual.
++	 */
++	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
++	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
++#endif /* CONFIG_HW_WATCHDOG */
++
++	/*
++	 * Enable GPIO_WKUP_7 to "read the status of the actual power
++	 * situation". Default direction is input, so no need to set it
++	 * explicitly.
+ 	 */
+-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
++	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7;
+ 	return 0;
+ }
+ 
+ 
+ #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+-
+-#define GPIO_PSC1_4	0x01000000UL
+-
+ void init_ide_reset(void)
+ {
+ 	debug("init_ide_reset\n");
+ 
+ 	/* Configure PSC1_4 as GPIO output for ATA reset */
+ 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
++	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
+ 	/* Deassert reset */
+-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
+ }
+ 
+ 
+@@ -223,30 +239,22 @@ void ide_set_reset(int idereset)
+ 	debug("ide_reset(%d)\n", idereset);
+ 
+ 	if (idereset) {
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ 		/* Make a delay. MPC5200 spec says 25 usec min */
+ 		udelay(500000);
+ 	} else
+-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
++		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
+ }
+ #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+ 
+ 
+-void led_d4_on(void)
+-{
+-	/* TIMER7 as GPIO output low */
+-	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24;
+-}
+-
+-
+-void led_d4_off(void)
+-{
+-	/* TIMER7 as GPIO output high */
+-	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34;
+-}
+-
+-
++#ifdef CONFIG_HW_WATCHDOG
+ void hw_watchdog_reset(void)
+ {
+-/* TODO fill this in */
++	/*
++	 * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
++	 * we need a positive or negative transition on WDI i.e., our PSC3_9.
++	 */
++	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
+ }
++#endif /* CONFIG_HW_WATCHDOG */
+diff -Naupr u-boot-1.1.6/CHANGELOG u-boot-1.1.6-fsl-1/CHANGELOG
+--- u-boot-1.1.6/CHANGELOG	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/CHANGELOG	2006-12-06 10:33:48.000000000 -0600
+@@ -1,3 +1,737 @@
++commit 8d9a8610b8256331132227e9e6585c6bd5742787
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Thu Nov 30 01:54:07 2006 +0100
++
++    Code cleanup. Update CHANGELOG.
++
++commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
++Author: Grant Likely <grant.likely@secretlab.ca>
++Date:	Wed Nov 29 16:23:42 2006 +0100
++
++    [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
++
++    The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
++    not the XLB frequency.
++
++    This patch depends on the previous patches for MPC52xx device tree support
++
++    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
++    Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
++
++commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
++Author: Stefan Roese <sr@denx.de>
++Date:	Wed Nov 29 15:42:37 2006 +0100
++
++    [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
++
++    This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
++    and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
++    quite similar and share the same board directory "prodrive/p3mx"
++    and the same config file "p3mx.h".
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
++Author: Stefan Roese <sr@denx.de>
++Date:	Wed Nov 29 12:53:15 2006 +0100
++
++    [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
++
++    In the bootvx command the load address was only read from the env
++    variable "loadaddr" and not optionally passed as paramter as described
++    in the help. This is fixed with this patch. The behaviour is now the
++    same as in the bootelf command.
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
++Author: Stefan Roese <sr@denx.de>
++Date:	Wed Nov 29 12:03:57 2006 +0100
++
++    [PATCH] include/ppc440.h minor error affecting interrupts
++
++    Fixed include/ppc440.c for UIC address Bug
++
++    Corrects bug affecting the addresses for the universal interrupt
++    controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
++
++    Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
++Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
++Date:	Tue Nov 28 16:17:27 2006 -0600
++
++    Make fsl-i2c not conflict with SOFT I2C
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit 14198bf768fdc958e3c1afd2404e5262208e98d7
++Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
++Date:	Tue Nov 28 16:17:18 2006 -0600
++
++    Fix I2C master address initialization.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
++Author: Kim Phillips <kim.phillips@freescale.com>
++Date:	Tue Nov 28 23:31:19 2006 -0600
++
++    Assign maintainers for mpc8349emds and mpc8360emds
++
++    Dave for mpc8360emds, and me for mpc8349emds.
++
++commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
++Author: Kim Phillips <kim.phillips@freescale.com>
++Date:	Tue Nov 28 23:28:33 2006 -0600
++
++    Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
++
++    give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
++    since they are passed by reference to ucc_get_cmxucr_reg and assigned.
++
++commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
++Author: Timur Tabi <timur@freescale.com>
++Date:	Tue Nov 28 12:09:35 2006 -0600
++
++    mpc83xx: Miscellaneous code style fixes
++
++    Implement various code style fixes and similar changes.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
++Author: Stefan Roese <sr@denx.de>
++Date:	Tue Nov 28 17:55:49 2006 +0100
++
++    [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
++
++    This patch adds the code and configuration necessary to boot with an
++    arch/powerpc Linux kernel.
++
++    Signed-off-by: Grant Likely <grant.likely@gmail.com>
++    Acked-by: Jon Loeliger <jdl@freescale.com>
++
++commit e732faec95a83cb468b4850ae807c8301dde8f6a
++Author: Stefan Roese <sr@denx.de>
++Date:	Tue Nov 28 16:09:24 2006 +0100
++
++    [PATCH] PPC4xx: 440SP Rev. C detection added
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
++Author: Stefan Roese <sr@denx.de>
++Date:	Tue Nov 28 11:04:45 2006 +0100
++
++    [PATCH] nand: Fix patch merge problem
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Mon Nov 27 22:53:53 2006 +0100
++
++    Update CHANGELOG
++
++commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 17:43:25 2006 +0100
++
++    [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
++
++    Patch below corrects the setting of the zmiifer register, it was
++    overwritting the register rather than ORing the settings.
++
++    Signed-off-by: Neil Wilson <NWilson@airspan.com>
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit d1a72545296800b7e219f93104ad5836f0003d66
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 17:34:10 2006 +0100
++
++    [PATCH] Select NAND embedded environment from board configuration
++
++    The current NAND Bootloader setup forces the environment
++    variables to be in line with the bootloader. This change
++    enables the configuration to be made in the board include
++    file instead so that it can be individually enabled.
++
++    Signed-off-by: Nick Spence <nick.spence@freescale.com>
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 15784862857c3c2214498defcfed84ff137fb81e
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 17:22:19 2006 +0100
++
++    [PATCH] nand_wait() timeout fixes
++
++    Two fixes for the nand_wait() function in
++    drivers/nand/nand_base.c:
++
++    1. Use correct timeouts. The original timeouts in Linux
++    source are 400ms and 20ms not 40s and 20s
++
++    2. Return correct error value in case of timeout. 0 is
++    interpreted as OK.
++
++    Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit da5553b095bf04f4f109ad7e565dae3aba47b230
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 17:04:06 2006 +0100
++
++    [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
++
++    This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
++    arguments to bootm.	 It removes the getenv("disable_of") test that used
++    to be used for this purpose.
++
++    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
++    Acked-by: Jon Loeliger <jdl@freescale.com>
++
++commit a9398e018593782c5fa7d0741955fc1256b34c1e
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Mon Nov 27 15:32:42 2006 +0100
++
++    Minor code cleanup. Update CHANGELOG.
++
++commit 1729b92cde575476684bffe819d0b7791b57bff2
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 14:52:04 2006 +0100
++
++    [PATCH] 4xx: Fix problem with board specific reset code (now for real)
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 14:49:51 2006 +0100
++
++    [PATCH] alpr: remove unused board specific flash driver
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 14:48:41 2006 +0100
++
++    [PATCH] 4xx: Fix problem with board specific reset code
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit ec0c2ec725aec9524a177a77ce75559e644a931a
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 14:46:06 2006 +0100
++
++    [PATCH] Remove testing 4xx enet PHY setup
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 27 14:12:17 2006 +0100
++
++    [PATCH] Update Prodrive ALPR board support (440GX)
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 78d620ebb5871d252270dedfad60c6568993b780
++Author: Wolfgang Denk <wd@atlas.denx.de>
++Date:	Thu Nov 23 22:58:58 2006 +0100
++
++    Updates for TQM5200 modules:
++    - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
++    - simplify "udate" definitions
++
++commit 2053283304eeddf250d109e6791eb6fa4cad14f7
++Author: Stefan Roese <sr@denx.de>
++Date:	Wed Nov 22 13:20:50 2006 +0100
++
++    [PATCH] PPC4xx start.S: Fix for processor errata
++
++    Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
++    errata 1.12: 440_33 by moving patch up in code.
++
++    Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit 4ef6251403f637841000e0fef9e832aa01339822
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 20 20:39:52 2006 +0100
++
++    [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
++
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Mon Nov 20 10:28:30 2006 +0100
++
++    Update CHANGELOG
++
++commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
++Author: Stefan Roese <sr@denx.de>
++Date:	Mon Nov 13 13:55:24 2006 +0100
++
++    [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
++
++       * Adds support for AMD command set Top Boot flash geometry reversal
++       * Adds support for reading JEDEC Manufacturer ID and Device ID
++       * Adds support for displaying command set, manufacturer id and
++	 device ids (flinfo)
++       * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
++       * Removes outdated change history (refer to git log instead)
++
++    Signed-off-by: Tolunay Orkun <listmember@orkun.us>
++    Signed-off-by: Stefan Roese <sr@denx.de>
++
++commit b21b511d4c50408f4853f46f06b601272196223f
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Sun Nov 12 21:13:23 2006 +0100
++
++    Update CHANGELOG
++
++commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
++Author: Bartlomiej Sieka <tur@semihalf.com>
++Date:	Sat Nov 11 22:48:22 2006 +0100
++
++    Disable the watchdog in the default config for the V38B board.
++
++commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
++Author: Bartlomiej Sieka <tur@semihalf.com>
++Date:	Sat Nov 11 22:43:00 2006 +0100
++
++    Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
++    group is enabled for USB earlier (in cpu_init_f() instead of
++    usb_lowlevel_init()).
++
++commit 91650b3e4de688038d4f71279c44858e3e2c6870
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Mon Nov 6 17:06:36 2006 +0100
++
++    Sequential accesses to non-existent memory must be synchronized,
++    at least on G2 cores.
++
++    This fixes get_ram_size() problems on MPC5200 Rev. B boards.
++
++commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
++Author: Timur Tabi <timur@freescale.com>
++Date:	Fri Nov 3 19:15:00 2006 -0600
++
++    mpc83xx: Update 83xx to use fsl_i2c.c
++
++    Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
++    cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
++    Added multiple I2C bus support to fsl_i2c.c.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit d239d74b1c937984bc519083a8e7de373a390f06
++Author: Timur Tabi <timur@freescale.com>
++Date:	Fri Nov 3 12:00:28 2006 -0600
++
++    mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
++
++    Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
++    tree matches the other 8xxx trees.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit f7fb2e703ec9688541416962724adff70a7322cb
++Author: Kim Phillips <kim.phillips@freescale.com>
++Date:	Thu Nov 2 19:47:11 2006 -0600
++
++    mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
++
++commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Thu Nov 2 18:05:50 2006 -0600
++
++    mpc83xx: Fix the incorrect dcbz operation
++
++    The 834x rev1.x silicon has one CPU5 errata.
++
++    The issue is when the data cache locked with
++    HID0[DLOCK], the dcbz instruction looks like no-op inst.
++
++    The right behavior of the data cache is when the data cache
++    Locked with HID0[DLOCK], the dcbz instruction allocates
++    new tags in cache.
++
++    The 834x rev3.0 and later and 8360 have not this bug inside.
++
++    So, when 834x rev3.0/8360 are working with ECC, the dcbz
++    instruction will corrupt the stack in cache, the processor will
++    checkstop reset.
++
++    However, the 834x rev1.x can work with ECC with these code,
++    because the sillicon has this cache bug. The dcbz will not
++    corrupt the stack in cache.
++    Really, it is the fault code running on fault sillicon.
++
++    This patch fix the incorrect dcbz operation. Instead of
++    CPU FP writing to initialise the ECC.
++
++    CHANGELOG:
++    * Fix the incorrect dcbz operation instead of CPU FP
++    writing to initialise the ECC memory. Otherwise, it
++    will corrupt the stack in cache, The processor will checkstop
++    reset.
++
++    Signed-off-by: Dave Liu <daveliu@freescale.com>
++
++commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
++Author: Kim Phillips <kim.phillips@freescale.com>
++Date:	Wed Nov 1 00:10:40 2006 -0600
++
++    mpc83xx: add OF_FLAT_TREE bits to 83xx boards
++
++    add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
++    STDOUT_PATH configuration bits to mpc8349emds,
++    mpc8349itx, and mpc8360emds board code.
++
++    redo environment to use bootm with the fdtaddr
++    for booting ARCH=powerpc kernels by default,
++    and provide default fdtaddr values.
++
++commit 48041365b3420589ad464ebc7752e0053538b729
++Author: Kim Phillips <kim.phillips@freescale.com>
++Date:	Wed Nov 1 00:07:25 2006 -0600
++
++    mpc83xx: change ft code to modify local-mac-address property
++
++    Update 83xx OF code to update local-mac-address properties
++    for ethernet instead of the obsolete 'address' property.
++
++commit 9ca880a250870a7d55754291b5591d2b5fe89b54
++Author: Timur Tabi <timur@freescale.com>
++Date:	Tue Oct 31 21:23:16 2006 -0600
++
++    mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
++
++    This patch also adds an improved I2C set_speed(), which handles all clock
++    frequencies.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit ac4b5622ce050b5ee1e154b98df630d778661632
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Tue Oct 31 19:54:59 2006 -0600
++
++    mpc83xx: add the README.mpc8360emds
++
++    add doc/README.mpc8360emds to accompany the new board support
++
++commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Fri Nov 3 12:11:15 2006 -0600
++
++    mpc83xx: add QE ethernet support
++
++    this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
++
++commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Fri Nov 3 19:33:44 2006 -0600
++
++    mpc83xx: Add MPC8360EMDS basic board support
++
++    Add support for the Freescale MPC8360EMDS board.
++    Includes DDR, DUART, Local Bus, PCI.
++
++commit 23892e49352de74f7fac36ff90bb1be143d195e3
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Tue Oct 31 19:30:40 2006 -0600
++
++    mpc83xx: add the QUICC Engine (QE) immap file
++
++    common QE immap file.  Also required for 8360.
++
++commit b701652a4992bdcc62fb1a6038a85beef9e55da4
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Tue Oct 31 19:25:38 2006 -0600
++
++    mpc83xx: Add 8360 specifics to 83xx immap
++
++    Mainly add QE device dependencies, with appropriate 8360 protection.
++    Lindent also run.
++
++commit 988833324a7fda482c8ac3ca23eb539f8232e404
++Author: Timur Tabi <timur@freescale.com>
++Date:	Tue Oct 31 19:14:41 2006 -0600
++
++    mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
++
++    PREREQUISITE PATCHES:
++
++    * This patch can only be applied after the following patches have been applied:
++
++      1) DNX#2006092142000015 "Add support for the MPC8349E-mITX  1/2"
++      2) DNX#2006092142000024 "Add support for the MPC8349E-mITX  2/2"
++
++    CHANGELOG:
++
++    * For the 8349E-mITX, fix some size values in pci_init_board(), enable
++      the clock for the 2nd USB board (Linux kernel will hang otherwise),
++      and fix the CONFIG_BOOTARGS macro.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
++Author: Timur Tabi <timur@freescale.com>
++Date:	Tue Oct 31 18:44:42 2006 -0600
++
++    mpc83xx: Add support for the MPC8349E-mITX
++
++    PREREQUISITE PATCHES:
++
++    * This patch can only be applied after the following patches have been applied:
++
++      1) DNX#2006090742000024 "Add support for multiple I2C buses"
++      2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
++      3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
++      4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
++      5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
++
++    CHANGELOG:
++
++    * Add support for the Freescale MPC8349E-mITX reference design platform.
++      The second TSEC (Vitesse 7385 switch) is not supported at this time.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit 183da6d9b446cc12123455844ad1187e2375626f
++Author: Ben Warren <bwarren@qstreams.com>
++Date:	Tue Sep 12 10:15:53 2006 -0400
++
++    Additional MPC8349 support for multibus i2c
++
++    Hello,
++
++    Here is a patch for a file that was accidentally left out of a previous
++    attempt.
++
++    It accompanies the patch with ticket DNX#2006090742000024
++
++    CHANGELOG:
++	    Change PCI initialization to use new multi-bus I2C API.
++
++    regards,
++    Ben
++
++commit b24f119d672b709d153ff2ac091d4aa63ec6877d
++Author: Ben Warren <bwarren@qstreams.com>
++Date:	Thu Sep 7 16:51:04 2006 -0400
++
++    Multi-bus I2C implementation of MPC834x
++
++    Hello,
++
++    Attached is a patch implementing multiple I2C buses on the MPC834x CPU
++    family and the MPC8349EMDS board in particular.
++    This patch requires Patch 1 (Add support for multiple I2C buses).
++    Testing was performed on a 533MHz board.
++
++    /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
++
++    Signed-off-by: Ben Warren <bwarren@qstreams.com>
++
++    CHANGELOG:
++	    Implemented driver-level code to support two I2C buses on the
++    MPC834x CPU family and the MPC8349EMDS board.  Available I2C bus speeds
++    are 50kHz, 100kHz and 400kHz on each bus.
++
++    regards,
++    Ben
++
++commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
++Author: Ben Warren <bwarren@qstreams.com>
++Date:	Thu Sep 7 16:50:54 2006 -0400
++
++    Add support for multiple I2C buses
++
++    Hello,
++
++    Attached is a patch providing support for multiple I2C buses at the
++    command level.  The second part of the patch includes an implementation
++    for the MPC834x CPU and MPC8349EMDS board.
++
++    /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
++
++    Signed-off-by: Ben Warren <bwarren@qstreams.com>
++
++    Overview:
++
++    1. Include new 'i2c' command (based on USB implementation) using
++    CONFIG_I2C_CMD_TREE.
++
++    2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS.  Note that
++    the commands to change bus number and speed are only available under the
++    new 'i2c' command mentioned in the first bullet.
++
++    3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
++    systems.  When CONFIG_I2C_MULTI_BUS is used, this option takes the form
++    of an array of bus-device pairs.  Otherwise, it is an array of uchar.
++
++    CHANGELOG:
++	    Added new 'i2c' master command for all I2C interaction.  This is
++    conditionally compiled with CONFIG_I2C_CMD_TREE.  New commands added for
++    setting I2C bus speed as well as changing the active bus if the board
++    has more than one (conditionally compiled with
++    CONFIG_I2C_MULTI_BUS).  Updated NOPROBE logic to handle multiple buses.
++    Updated README.
++
++    regards,
++    Ben
++
++commit bed85caf872714ebf53013967a695c9d63acfc68
++Author: Timur Tabi <timur@freescale.com>
++Date:	Tue Oct 31 18:13:36 2006 -0600
++
++    mpc83xx: Add support for Errata DDR6 on MPC 834x systems
++
++    CHANGELOG:
++
++    * Errata DDR6, which affects all current MPC 834x processors, lists changes
++      required to maintain compatibility with various types of DDR memory.  This
++      patch implements those changes.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit afd6e470f639883002c7c59d562690a5cb0f4865
++Author: Timur Tabi <timur@freescale.com>
++Date:	Wed Oct 25 18:45:23 2006 -0500
++
++    mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
++
++commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
++Author: Timur Tabi <timur@freescale.com>
++Date:	Tue Aug 22 17:07:00 2006 -0500
++
++    mpc83xx: Add support for variable flash memory sizes on 83xx systems
++
++    CHANGELOG:
++
++    * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
++       window registers, instead of using a hard-coded value of 8MB.
++
++    Signed-off-by: Timur Tabi <timur@freescale.com>
++
++commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
++Author: Tanya Jiang <tanya.jiang@freescale.com>
++Date:	Thu Aug 3 18:38:13 2006 +0800
++
++    mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
++
++    Unified TQM834x variable names with 83xx and consolidated macro
++    in preparation for the 8360 and other upcoming 83xx devices.
++
++    Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
++
++commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
++Author: Dave Liu <daveliu@freescale.com>
++Date:	Wed Oct 25 14:41:21 2006 -0500
++
++    mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
++
++    Incorporated the common unified variable names and the changes in preparation
++    for releasing mpc8360 patches.
++
++    Signed-off-by: Dave Liu <daveliu@freescale.com>
++
++commit 3894c46c27c64891f93ac04edde86a9fa9758d92
++Author: Tanya Jiang <tanya.jiang@freescale.com>
++Date:	Thu Aug 3 18:36:02 2006 +0800
++
++    mpc83xx: Fix missing build for mpc8349emds pci.c
++
++    Make pci build for mpc8349emds
++
++    Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
++
++commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
++Author: Tanya Jiang <tanya.jiang@freescale.com>
++Date:	Thu Aug 3 18:39:49 2006 +0800
++
++    mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
++
++    Removed unused file resetvec.S for mpc83xx cpu
++
++    Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
++
++commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
++Author: Nick Spence <Nick.Spence@freescale.com>
++Date:	Sat Sep 30 00:32:59 2006 -0700
++
++    NAND Flash verify across block boundaries
++
++    This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
++    defined
++    and the write crosses a block boundary. The pointer to the verification
++    buffer (bufstart) is not being updated to reflect the starting of the
++    new
++    block so the verification of the second block fails.
++
++    CHANGELOG:
++
++    * Fix NAND FLASH page verification across block boundaries
++
++commit f484dc791a3932537213c43c654cc1295c64b84c
++Author: Nick Spence <nick.spence@freescale.com>
++Date:	Thu Sep 7 07:39:46 2006 -0700
++
++    Added RGMII support to the TSECs and Marvell 881111 Phy
++
++    Added a phy initialization to adjust the RGMII RX and TX timing
++    Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
++
++    Signed-off-by: Nick Spence <nick.spence@freescale.com>
++
++commit c59200443072353044aa4bf737a5a60f9a9af231
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date:	Thu Nov 2 15:15:01 2006 +0100
++
++    Release U-Boot 1.1.6
++
++commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
++Author: Bartlomiej Sieka <tur@semihalf.com>
++Date:	Wed Nov 1 02:04:38 2006 +0100
++
++    Finish up support for MarelV38B board
++     - add watchdog support
++     - enable GPIO_WKUP_7 pin for input
++     - code cleanup
++
++commit ffa150bc90c943ca265170bd1be3f293674dd5c7
++Author: Bartlomiej Sieka <tur@semihalf.com>
++Date:	Wed Nov 1 01:45:46 2006 +0100
++
++    - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
++	  * remove warnings when compiling ethaddr.c
++	  * adjust linker script (fixes a crash resulting from incorrect
++	  definition of __u_boot_cmd_start)
++    - Some MarelV38B code cleanup.
++
++commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
++Author: Bartlomiej Sieka <tur@semihalf.com>
++Date:	Wed Nov 1 01:38:16 2006 +0100
++
++    - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
++      MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
++      Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
++      MPC5XXX_WU_GPIO_DATA_O for affected boards.
++
++    - Add defintions for some MPC5XXX GPIO pins.
++
++commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
++Author: Bartlomiej Sieka <tur@semihalf.com>
++Date:	Wed Nov 1 01:34:29 2006 +0100
++
++    Changed MarelV38B board make target to lowercase. Config file cleanup.
++
+ commit 1954be6e9c9421b45d0a9d05b10356acc7563150
+ Author: Wolfgang Denk <wd@pollux.denx.de>
+ Date:	Sun Oct 29 01:03:51 2006 +0200
+@@ -451,6 +1185,34 @@ Date:	Tue Oct 10 17:02:22 2006 -0500
+ 
+     Fix whitespace and 80-col issues.
+ 
++commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
++Author: Stefan Roese <sr@denx.de>
++Date:	Sat Oct 7 11:36:51 2006 +0200
++
++    CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
++    Patch by Stefan Roese, 07 Oct 2006
++
++commit 5bc528fa4da751d472397b308137238a6465afd2
++Author: Stefan Roese <sr@denx.de>
++Date:	Sat Oct 7 11:35:25 2006 +0200
++
++    Update ALPR code (NAND support working now)
++    Patch by Stefan Roese, 07 Oct 2006
++
++commit 77d5034847d328753b80c46b83f960a14a26f40e
++Author: Stefan Roese <sr@denx.de>
++Date:	Sat Oct 7 11:33:03 2006 +0200
++
++    Remove compile warnings in fpga code
++    Patch by Stefan Roese, 07 Oct 2006
++
++commit f3443867e90d2979a7dd1c65b0d537777e1f9850
++Author: Stefan Roese <sr@denx.de>
++Date:	Sat Oct 7 11:30:52 2006 +0200
++
++    Add CONFIG_BOARD_RESET to configure board specific reset function
++    Patch by Stefan Roese, 07 Oct 2006
++
+ commit f55df18187e7a45cb73fec4370d12135e6691ae1
+ Author: John Traill <john.traill@freescale.com>
+ Date:	Fri Sep 29 08:23:12 2006 +0100
+@@ -683,6 +1445,21 @@ Date:	Wed Aug 16 10:54:09 2006 -0500
+ 
+     Signed-off-by: Matthew McClintock <msm@freescale.com>
+ 
++commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
++Author: Stefan Roese <sr@denx.de>
++Date:	Tue Aug 15 14:22:35 2006 +0200
++
++    Add initial support for the ALPR board from Prodrive
++    NAND needs some additional testing
++    Patch by Heiko Schocher, 15 Aug 2006
++
++commit f0ff4692ff3372dec55074a8eb444943ab095abb
++Author: Stefan Roese <sr@denx.de>
++Date:	Tue Aug 15 14:15:51 2006 +0200
++
++    Add FPGA Altera Cyclone 2 support
++    Patch by Heiko Schocher, 15 Aug 2006
++
+ commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
+ Author: Jon Loeliger <jdl@freescale.com>
+ Date:	Mon Aug 14 15:33:38 2006 -0500
+diff -Naupr u-boot-1.1.6/common/altera.c u-boot-1.1.6-fsl-1/common/altera.c
+--- u-boot-1.1.6/common/altera.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/altera.c	2006-11-30 12:34:13.000000000 -0600
+@@ -50,15 +50,20 @@ int altera_load( Altera_desc *desc, void
+ {
+ 	int ret_val = FPGA_FAIL;	/* assume a failure */
+ 
+-	if (!altera_validate (desc, __FUNCTION__)) {
++	if (!altera_validate (desc, (char *)__FUNCTION__)) {
+ 		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+ 	} else {
+ 		switch (desc->family) {
+ 		case Altera_ACEX1K:
++		case Altera_CYC2:
+ #if (CONFIG_FPGA & CFG_ACEX1K)
+ 			PRINTF ("%s: Launching the ACEX1K Loader...\n",
+ 					__FUNCTION__);
+ 			ret_val = ACEX1K_load (desc, buf, bsize);
++#elif (CONFIG_FPGA & CFG_CYCLON2)
++			PRINTF ("%s: Launching the CYCLON II Loader...\n",
++					__FUNCTION__);
++			ret_val = CYC2_load (desc, buf, bsize);
+ #else
+ 			printf ("%s: No support for ACEX1K devices.\n",
+ 					__FUNCTION__);
+@@ -78,7 +83,7 @@ int altera_dump( Altera_desc *desc, void
+ {
+ 	int ret_val = FPGA_FAIL;	/* assume a failure */
+ 
+-	if (!altera_validate (desc, __FUNCTION__)) {
++	if (!altera_validate (desc, (char *)__FUNCTION__)) {
+ 		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+ 	} else {
+ 		switch (desc->family) {
+@@ -106,13 +111,16 @@ int altera_info( Altera_desc *desc )
+ {
+ 	int ret_val = FPGA_FAIL;
+ 
+-	if (altera_validate (desc, __FUNCTION__)) {
++	if (altera_validate (desc, (char *)__FUNCTION__)) {
+ 		printf ("Family:        \t");
+ 		switch (desc->family) {
+ 		case Altera_ACEX1K:
+ 			printf ("ACEX1K\n");
+ 			break;
+ 			/* Add new family types here */
++		case Altera_CYC2:
++			printf ("CYCLON II\n");
++			break;
+ 		default:
+ 			printf ("Unknown family type, %d\n", desc->family);
+ 		}
+@@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc )
+ 			printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
+ 			switch (desc->family) {
+ 			case Altera_ACEX1K:
++			case Altera_CYC2:
+ #if (CONFIG_FPGA & CFG_ACEX1K)
+ 				ACEX1K_info (desc);
++#elif (CONFIG_FPGA & CFG_CYCLON2)
++				CYC2_info (desc);
+ #else
+ 				/* just in case */
+ 				printf ("%s: No support for ACEX1K devices.\n",
+@@ -176,7 +187,7 @@ int altera_reloc( Altera_desc *desc, ulo
+ {
+ 	int ret_val = FPGA_FAIL;	/* assume a failure */
+ 
+-	if (!altera_validate (desc, __FUNCTION__)) {
++	if (!altera_validate (desc, (char *)__FUNCTION__)) {
+ 		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+ 	} else {
+ 		switch (desc->family) {
+@@ -188,6 +199,14 @@ int altera_reloc( Altera_desc *desc, ulo
+ 					__FUNCTION__);
+ #endif
+ 			break;
++		case Altera_CYC2:
++#if (CONFIG_FPGA & CFG_CYCLON2)
++			ret_val = CYC2_reloc (desc, reloc_offset);
++#else
++			printf ("%s: No support for CYCLON II devices.\n",
++					__FUNCTION__);
++#endif
++			break;
+ 			/* Add new family types here */
+ 		default:
+ 			printf ("%s: Unsupported family type, %d\n",
+diff -Naupr u-boot-1.1.6/common/cmd_bootm.c u-boot-1.1.6-fsl-1/common/cmd_bootm.c
+--- u-boot-1.1.6/common/cmd_bootm.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/cmd_bootm.c	2006-11-30 12:34:13.000000000 -0600
+@@ -833,10 +833,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int fl
+ 			printf ("ERROR: flat device tree size does not agree with image\n");
+ 			return;
+ 		}
+-
+-	} else if (getenv("disable_of") == NULL) {
+-		printf ("ERROR: bootm needs flat device tree as third argument\n");
+-		return;
+ 	}
+ #endif
+ 	if (!data) {
+@@ -913,23 +909,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int fl
+ 
+ 	SHOW_BOOT_PROGRESS (15);
+ 
+-#ifndef CONFIG_OF_FLAT_TREE
+-
+ #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
+ 	unlock_ram_in_cache();
+ #endif
+ 
+-	/*
+-	 * Linux Kernel Parameters:
+-	 *   r3: ptr to board info data
+-	 *   r4: initrd_start or 0 if no initrd
+-	 *   r5: initrd_end - unused if r4 is 0
+-	 *   r6: Start of command line string
+-	 *   r7: End   of command line string
+-	 */
+-	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+-
+-#else	/* CONFIG_OF_FLAT_TREE */
++#ifdef CONFIG_OF_FLAT_TREE
+ 	/* move of_flat_tree if needed */
+ 	if (of_data) {
+ 		ulong of_start, of_len;
+@@ -948,30 +932,36 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int fl
+ 			of_start, of_start + of_len - 1);
+ 		memmove ((void *)of_start, (void *)of_data, of_len);
+ 	}
++#endif
+ 
+-	ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
+-	/* ft_dump_blob(of_flat_tree); */
+-
+-#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
+-	unlock_ram_in_cache();
++	/*
++	 * Linux Kernel Parameters (passing board info data):
++	 *   r3: ptr to board info data
++	 *   r4: initrd_start or 0 if no initrd
++	 *   r5: initrd_end - unused if r4 is 0
++	 *   r6: Start of command line string
++	 *   r7: End   of command line string
++	 */
++#ifdef CONFIG_OF_FLAT_TREE
++	if (!of_flat_tree)	/* no device tree; boot old style */
+ #endif
++		(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
++		/* does not return */
++
++#ifdef CONFIG_OF_FLAT_TREE
+ 	/*
+-	 * Linux Kernel Parameters:
++	 * Linux Kernel Parameters (passing device tree):
+ 	 *   r3: ptr to OF flat tree, followed by the board info data
+ 	 *   r4: physical pointer to the kernel itself
+ 	 *   r5: NULL
+ 	 *   r6: NULL
+ 	 *   r7: NULL
+ 	 */
+-	if (getenv("disable_of") != NULL)
+-		(*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end,
+-			cmd_start, cmd_end);
+-	else {
+-		ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
+-		/* ft_dump_blob(of_flat_tree); */
+-		(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
+-	}
+-#endif	/* CONFIG_OF_FLAT_TREE */
++	ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
++	/* ft_dump_blob(of_flat_tree); */
++
++	(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
++#endif
+ }
+ #endif /* CONFIG_PPC */
+ 
+diff -Naupr u-boot-1.1.6/common/cmd_elf.c u-boot-1.1.6-fsl-1/common/cmd_elf.c
+--- u-boot-1.1.6/common/cmd_elf.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/cmd_elf.c	2006-12-06 10:33:49.000000000 -0600
+@@ -79,7 +79,7 @@ int do_bootelf (cmd_tbl_t *cmdtp, int fl
+  * be either an ELF image or a raw binary.  Will attempt to setup the
+  * bootline and other parameters correctly.
+  * ====================================================================== */
+-int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+ {
+ 	unsigned long addr;		/* Address of image            */
+ 	unsigned long bootaddr;		/* Address to put the bootline */
+@@ -96,12 +96,10 @@ int do_bootvx ( cmd_tbl_t *cmdtp, int fl
+ 	 * If we don't know where the image is then we're done.
+ 	 */
+ 
+-	if ((tmp = getenv ("loadaddr")) != NULL) {
+-		addr = simple_strtoul (tmp, NULL, 16);
+-	} else {
+-		puts ("No load address provided\n");
+-		return 1;
+-	}
++	if (argc < 2)
++		addr = load_addr;
++	else
++		addr = simple_strtoul (argv[1], NULL, 16);
+ 
+ #if (CONFIG_COMMANDS & CFG_CMD_NET)
+ 	/* Check to see if we need to tftp the image ourselves before starting */
+diff -Naupr u-boot-1.1.6/common/cmd_fpga.c u-boot-1.1.6-fsl-1/common/cmd_fpga.c
+--- u-boot-1.1.6/common/cmd_fpga.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/cmd_fpga.c	2006-11-30 12:34:13.000000000 -0600
+@@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr);
+ #define FPGA_LOAD   1
+ #define FPGA_LOADB  2
+ #define FPGA_DUMP   3
++#define FPGA_LOADMK 4
+ 
+ /* Convert bitstream data and load into the fpga */
+ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
+@@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag
+ 		rc = fpga_loadbitstream(dev, fpga_data, data_size);
+ 		break;
+ 
++	case FPGA_LOADMK:
++		{
++			image_header_t header;
++			image_header_t *hdr = &header;
++			ulong	data;
++
++			memmove (&header, (char *)fpga_data, sizeof(image_header_t));
++			if (ntohl(hdr->ih_magic) != IH_MAGIC) {
++				puts ("Bad Magic Number\n");
++				return 1;
++			}
++			data = ((ulong)fpga_data + sizeof(image_header_t));
++			data_size  = ntohl(hdr->ih_size);
++			rc = fpga_load (dev, (void *)data, data_size);
++		}
++		break;
++
+ 	case FPGA_DUMP:
+ 		rc = fpga_dump (dev, fpga_data, data_size);
+ 		break;
+@@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr)
+ 		op = FPGA_LOADB;
+ 	} else if (!strcmp ("load", opstr)) {
+ 		op = FPGA_LOAD;
++	} else if (!strcmp ("loadmk", opstr)) {
++		op = FPGA_LOADMK;
+ 	} else if (!strcmp ("dump", opstr)) {
+ 		op = FPGA_DUMP;
+ 	}
+@@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
+ 	    "\tinfo\tlist known device information\n"
+ 	    "\tload\tLoad device from memory buffer\n"
+ 	    "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
++	    "\tloadmk\tLoad device generated with mkimage\n"
+ 	    "\tdump\tLoad device to memory buffer\n");
+ #endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */
+diff -Naupr u-boot-1.1.6/common/cmd_i2c.c u-boot-1.1.6-fsl-1/common/cmd_i2c.c
+--- u-boot-1.1.6/common/cmd_i2c.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/cmd_i2c.c	2006-11-30 12:34:13.000000000 -0600
+@@ -101,8 +101,31 @@ static uchar	i2c_mm_last_chip;
+ static uint	i2c_mm_last_addr;
+ static uint	i2c_mm_last_alen;
+ 
++/* If only one I2C bus is present, the list of devices to ignore when
++ * the probe command is issued is represented by a 1D array of addresses.
++ * When multiple buses are present, the list is an array of bus-address
++ * pairs.  The following macros take care of this */
++
+ #if defined(CFG_I2C_NOPROBES)
++#if defined(CONFIG_I2C_MULTI_BUS)
++static struct
++{
++	uchar	bus;
++	uchar	addr;
++} i2c_no_probes[] = CFG_I2C_NOPROBES;
++#define GET_BUS_NUM	i2c_get_bus_num()
++#define COMPARE_BUS(b,i)	(i2c_no_probes[(i)].bus == (b))
++#define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)].addr == (a))
++#define NO_PROBE_ADDR(i)	i2c_no_probes[(i)].addr
++#else		/* single bus */
+ static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
++#define GET_BUS_NUM	0
++#define COMPARE_BUS(b,i)	((b) == 0)	/* Make compiler happy */
++#define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)] == (a))
++#define NO_PROBE_ADDR(i)	i2c_no_probes[(i)]
++#endif	/* CONFIG_MULTI_BUS */
++
++#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
+ #endif
+ 
+ static int
+@@ -151,7 +174,7 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int fl
+ 		 */
+ 		addr = simple_strtoul(argv[2], NULL, 16);
+ 		alen = 1;
+-		for(j = 0; j < 8; j++) {
++		for (j = 0; j < 8; j++) {
+ 			if (argv[2][j] == '.') {
+ 				alen = argv[2][j+1] - '0';
+ 				if (alen > 4) {
+@@ -159,9 +182,8 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int fl
+ 					return 1;
+ 				}
+ 				break;
+-			} else if (argv[2][j] == '\0') {
++			} else if (argv[2][j] == '\0')
+ 				break;
+-			}
+ 		}
+ 
+ 		/*
+@@ -185,9 +207,9 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int fl
+ 
+ 		linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+ 
+-		if(i2c_read(chip, addr, alen, linebuf, linebytes) != 0) {
++		if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
+ 			puts ("Error reading the chip.\n");
+-		} else {
++		else {
+ 			printf("%04x:", addr);
+ 			cp = linebuf;
+ 			for (j=0; j<linebytes; j++) {
+@@ -256,17 +278,16 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int fl
+ 	 */
+ 	addr = simple_strtoul(argv[2], NULL, 16);
+ 	alen = 1;
+-	for(j = 0; j < 8; j++) {
++	for (j = 0; j < 8; j++) {
+ 		if (argv[2][j] == '.') {
+ 			alen = argv[2][j+1] - '0';
+-			if(alen > 4) {
++			if (alen > 4) {
+ 				printf ("Usage:\n%s\n", cmdtp->usage);
+ 				return 1;
+ 			}
+ 			break;
+-		} else if (argv[2][j] == '\0') {
++		} else if (argv[2][j] == '\0')
+ 			break;
+-		}
+ 	}
+ 
+ 	/*
+@@ -277,16 +298,14 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int fl
+ 	/*
+ 	 * Optional count
+ 	 */
+-	if(argc == 5) {
++	if (argc == 5)
+ 		count = simple_strtoul(argv[4], NULL, 16);
+-	} else {
++	else
+ 		count = 1;
+-	}
+ 
+ 	while (count-- > 0) {
+-		if(i2c_write(chip, addr++, alen, &byte, 1) != 0) {
++		if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
+ 			puts ("Error writing the chip.\n");
+-		}
+ 		/*
+ 		 * Wait for the write to complete.  The write can take
+ 		 * up to 10mSec (we allow a little more time).
+@@ -303,9 +322,9 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int fl
+ #endif
+ 
+ #if 0
+-		for(timeout = 0; timeout < 10; timeout++) {
++		for (timeout = 0; timeout < 10; timeout++) {
+ 			udelay(2000);
+-			if(i2c_probe(chip) == 0)
++			if (i2c_probe(chip) == 0)
+ 				break;
+ 		}
+ #endif
+@@ -346,17 +365,16 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int fl
+ 	 */
+ 	addr = simple_strtoul(argv[2], NULL, 16);
+ 	alen = 1;
+-	for(j = 0; j < 8; j++) {
++	for (j = 0; j < 8; j++) {
+ 		if (argv[2][j] == '.') {
+ 			alen = argv[2][j+1] - '0';
+-			if(alen > 4) {
++			if (alen > 4) {
+ 				printf ("Usage:\n%s\n", cmdtp->usage);
+ 				return 1;
+ 			}
+ 			break;
+-		} else if (argv[2][j] == '\0') {
++		} else if (argv[2][j] == '\0')
+ 			break;
+-		}
+ 	}
+ 
+ 	/*
+@@ -371,19 +389,16 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int fl
+ 	 */
+ 	crc = 0;
+ 	err = 0;
+-	while(count-- > 0) {
+-		if(i2c_read(chip, addr, alen, &byte, 1) != 0) {
++	while (count-- > 0) {
++		if (i2c_read(chip, addr, alen, &byte, 1) != 0)
+ 			err++;
+-		}
+ 		crc = crc32 (crc, &byte, 1);
+ 		addr++;
+ 	}
+-	if(err > 0)
+-	{
++	if (err > 0)
+ 		puts ("Error reading the chip,\n");
+-	} else {
++	else
+ 		printf ("%08lx\n", crc);
+-	}
+ 
+ 	return 0;
+ }
+@@ -441,17 +456,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl
+ 		 */
+ 		addr = simple_strtoul(argv[2], NULL, 16);
+ 		alen = 1;
+-		for(j = 0; j < 8; j++) {
++		for (j = 0; j < 8; j++) {
+ 			if (argv[2][j] == '.') {
+ 				alen = argv[2][j+1] - '0';
+-				if(alen > 4) {
++				if (alen > 4) {
+ 					printf ("Usage:\n%s\n", cmdtp->usage);
+ 					return 1;
+ 				}
+ 				break;
+-			} else if (argv[2][j] == '\0') {
++			} else if (argv[2][j] == '\0')
+ 				break;
+-			}
+ 		}
+ 	}
+ 
+@@ -461,17 +475,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl
+ 	 */
+ 	do {
+ 		printf("%08lx:", addr);
+-		if(i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) {
++		if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
+ 			puts ("\nError reading the chip,\n");
+-		} else {
++		else {
+ 			data = cpu_to_be32(data);
+-			if(size == 1) {
++			if (size == 1)
+ 				printf(" %02lx", (data >> 24) & 0x000000FF);
+-			} else if(size == 2) {
++			else if (size == 2)
+ 				printf(" %04lx", (data >> 16) & 0x0000FFFF);
+-			} else {
++			else
+ 				printf(" %08lx", data);
+-			}
+ 		}
+ 
+ 		nbytes = readline (" ? ");
+@@ -488,19 +501,17 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl
+ #endif
+ 		}
+ #ifdef CONFIG_BOOT_RETRY_TIME
+-		else if (nbytes == -2) {
++		else if (nbytes == -2)
+ 			break;	/* timed out, exit the command	*/
+-		}
+ #endif
+ 		else {
+ 			char *endp;
+ 
+ 			data = simple_strtoul(console_buffer, &endp, 16);
+-			if(size == 1) {
++			if (size == 1)
+ 				data = data << 24;
+-			} else if(size == 2) {
++			else if (size == 2)
+ 				data = data << 16;
+-			}
+ 			data = be32_to_cpu(data);
+ 			nbytes = endp - console_buffer;
+ 			if (nbytes) {
+@@ -510,9 +521,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl
+ 				 */
+ 				reset_cmd_timeout();
+ #endif
+-				if(i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) {
++				if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
+ 					puts ("Error writing the chip.\n");
+-				}
+ #ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
+ 				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ #endif
+@@ -538,14 +548,15 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int 
+ 	int j;
+ #if defined(CFG_I2C_NOPROBES)
+ 	int k, skip;
+-#endif
++	uchar bus = GET_BUS_NUM;
++#endif	/* NOPROBES */
+ 
+ 	puts ("Valid chip addresses:");
+-	for(j = 0; j < 128; j++) {
++	for (j = 0; j < 128; j++) {
+ #if defined(CFG_I2C_NOPROBES)
+ 		skip = 0;
+-		for (k = 0; k < sizeof(i2c_no_probes); k++){
+-			if (j == i2c_no_probes[k]){
++		for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
++			if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) {
+ 				skip = 1;
+ 				break;
+ 			}
+@@ -553,16 +564,17 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int 
+ 		if (skip)
+ 			continue;
+ #endif
+-		if(i2c_probe(j) == 0) {
++		if (i2c_probe(j) == 0)
+ 			printf(" %02X", j);
+-		}
+ 	}
+ 	putc ('\n');
+ 
+ #if defined(CFG_I2C_NOPROBES)
+ 	puts ("Excluded chip addresses:");
+-	for( k = 0; k < sizeof(i2c_no_probes); k++ )
+-		printf(" %02X", i2c_no_probes[k] );
++	for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
++		if (COMPARE_BUS(bus,k))
++			printf(" %02X", NO_PROBE_ADDR(k));
++	}
+ 	putc ('\n');
+ #endif
+ 
+@@ -601,7 +613,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int fl
+ 	 */
+ 	addr = simple_strtoul(argv[2], NULL, 16);
+ 	alen = 1;
+-	for(j = 0; j < 8; j++) {
++	for (j = 0; j < 8; j++) {
+ 		if (argv[2][j] == '.') {
+ 			alen = argv[2][j+1] - '0';
+ 			if (alen > 4) {
+@@ -609,9 +621,8 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int fl
+ 				return 1;
+ 			}
+ 			break;
+-		} else if (argv[2][j] == '\0') {
++		} else if (argv[2][j] == '\0')
+ 			break;
+-		}
+ 	}
+ 
+ 	/*
+@@ -619,24 +630,21 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int fl
+ 	 */
+ 	length = 1;
+ 	length = simple_strtoul(argv[3], NULL, 16);
+-	if(length > sizeof(bytes)) {
++	if (length > sizeof(bytes))
+ 		length = sizeof(bytes);
+-	}
+ 
+ 	/*
+ 	 * The delay time (uSec) is optional.
+ 	 */
+ 	delay = 1000;
+-	if (argc > 3) {
++	if (argc > 3)
+ 		delay = simple_strtoul(argv[4], NULL, 10);
+-	}
+ 	/*
+ 	 * Run the loop...
+ 	 */
+-	while(1) {
+-		if(i2c_read(chip, addr, alen, bytes, length) != 0) {
++	while (1) {
++		if (i2c_read(chip, addr, alen, bytes, length) != 0)
+ 			puts ("Error reading the chip.\n");
+-		}
+ 		udelay(delay);
+ 	}
+ 
+@@ -671,7 +679,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+  	 */
+ 	chip = simple_strtoul(argv[1], NULL, 16);
+ 
+-	if(i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
++	if (i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
+ 		puts ("No SDRAM Serial Presence Detect found.\n");
+ 		return 1;
+ 	}
+@@ -680,7 +688,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+ 	for (j = 0; j < 63; j++) {
+ 		cksum += data[j];
+ 	}
+-	if(cksum != data[63]) {
++	if (cksum != data[63]) {
+ 		printf ("WARNING: Configuration data checksum failure:\n"
+ 			"  is 0x%02x, calculated 0x%02x\n",
+ 			data[63], cksum);
+@@ -696,17 +704,15 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+ 		default: puts ("unknown\n");	break;
+ 	}
+ 	puts ("Row address bits             ");
+-	if((data[3] & 0x00F0) == 0) {
++	if ((data[3] & 0x00F0) == 0)
+ 		printf("%d\n", data[3] & 0x0F);
+-	} else {
++	else
+ 		printf("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F);
+-	}
+ 	puts ("Column address bits          ");
+-	if((data[4] & 0x00F0) == 0) {
++	if ((data[4] & 0x00F0) == 0)
+ 		printf("%d\n", data[4] & 0x0F);
+-	} else {
++	else
+ 		printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F);
+-	}
+ 	printf("Module rows                  %d\n", data[5]);
+ 	printf("Module data width            %d bits\n", (data[7] << 8) | data[6]);
+ 	puts ("Interface signal levels      ");
+@@ -729,11 +735,10 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+ 		case 2:  puts ("ECC\n");	break;
+ 		default: puts ("unknown\n");	break;
+ 	}
+-	if((data[12] & 0x80) == 0) {
++	if ((data[12] & 0x80) == 0)
+ 		puts ("No self refresh, rate        ");
+-	} else {
++	else
+ 		puts ("Self refresh, rate           ");
+-	}
+ 	switch(data[12] & 0x7F) {
+ 		case 0:  puts ("15.625uS\n");	break;
+ 		case 1:  puts ("3.9uS\n");	break;
+@@ -744,17 +749,16 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+ 		default: puts ("unknown\n");	break;
+ 	}
+ 	printf("SDRAM width (primary)        %d\n", data[13] & 0x7F);
+-	if((data[13] & 0x80) != 0) {
++	if ((data[13] & 0x80) != 0) {
+ 		printf("  (second bank)              %d\n",
+ 			2 * (data[13] & 0x7F));
+ 	}
+-	if(data[14] != 0) {
++	if (data[14] != 0) {
+ 		printf("EDC width                    %d\n",
+ 			data[14] & 0x7F);
+-		if((data[14] & 0x80) != 0) {
++		if ((data[14] & 0x80) != 0)
+ 			printf("  (second bank)              %d\n",
+ 				2 * (data[14] & 0x7F));
+-		}
+ 	}
+ 	printf("Min clock delay, back-to-back random column addresses %d\n",
+ 		data[15]);
+@@ -852,18 +856,18 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+ 		(data[35] & 0x80) ? '-' : '+',
+ 		(data[35] >> 4) & 0x07, data[35] & 0x0F);
+ 	puts ("Manufacturer's JEDEC ID      ");
+-	for(j = 64; j <= 71; j++)
++	for (j = 64; j <= 71; j++)
+ 		printf("%02X ", data[j]);
+ 	putc ('\n');
+ 	printf("Manufacturing Location       %02X\n", data[72]);
+ 	puts ("Manufacturer's Part Number   ");
+-	for(j = 73; j <= 90; j++)
++	for (j = 73; j <= 90; j++)
+ 		printf("%02X ", data[j]);
+ 	putc ('\n');
+ 	printf("Revision Code                %02X %02X\n", data[91], data[92]);
+ 	printf("Manufacturing Date           %02X %02X\n", data[93], data[94]);
+ 	puts ("Assembly Serial Number       ");
+-	for(j = 95; j <= 98; j++)
++	for (j = 95; j <= 98; j++)
+ 		printf("%02X ", data[j]);
+ 	putc ('\n');
+ 	printf("Speed rating                 PC%d\n",
+@@ -873,6 +877,74 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int fl
+ }
+ #endif	/* CFG_CMD_SDRAM */
+ 
++#if defined(CONFIG_I2C_CMD_TREE)
++#if defined(CONFIG_I2C_MULTI_BUS)
++int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
++{
++	int bus_idx, ret=0;
++
++	if (argc == 1)
++		/* querying current setting */
++		printf("Current bus is %d\n", i2c_get_bus_num());
++	else {
++		bus_idx = simple_strtoul(argv[1], NULL, 10);
++		printf("Setting bus to %d\n", bus_idx);
++		ret = i2c_set_bus_num(bus_idx);
++		if (ret)
++			printf("Failure changing bus number (%d)\n", ret);
++	}
++	return ret;
++}
++#endif  /* CONFIG_I2C_MULTI_BUS */
++
++int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
++{
++	int speed, ret=0;
++
++	if (argc == 1)
++		/* querying current speed */
++		printf("Current bus speed=%d\n", i2c_get_bus_speed());
++	else {
++		speed = simple_strtoul(argv[1], NULL, 10);
++		printf("Setting bus speed to %d Hz\n", speed);
++		ret = i2c_set_bus_speed(speed);
++		if (ret)
++			printf("Failure changing bus speed (%d)\n", ret);
++	}
++	return ret;
++}
++
++int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
++{
++#if defined(CONFIG_I2C_MULTI_BUS)
++	if (!strncmp(argv[1], "de", 2))
++		return do_i2c_bus_num(cmdtp, flag, --argc, ++argv);
++#endif  /* CONFIG_I2C_MULTI_BUS */
++	if (!strncmp(argv[1], "sp", 2))
++		return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "md", 2))
++		return do_i2c_md(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "mm", 2))
++		return do_i2c_mm(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "mw", 2))
++		return do_i2c_mw(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "nm", 2))
++		return do_i2c_nm(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "cr", 2))
++		return do_i2c_crc(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "pr", 2))
++		return do_i2c_probe(cmdtp, flag, --argc, ++argv);
++	if (!strncmp(argv[1], "lo", 2))
++		return do_i2c_loop(cmdtp, flag, --argc, ++argv);
++#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
++	if (!strncmp(argv[1], "sd", 2))
++		return do_sdram(cmdtp, flag, --argc, ++argv);
++#endif	/* CFG_CMD_SDRAM */
++	else
++		printf ("Usage:\n%s\n", cmdtp->usage);
++	return 0;
++}
++#endif  /* CONFIG_I2C_CMD_TREE */
+ 
+ /***************************************************/
+ 
+@@ -930,4 +1002,26 @@ U_BOOT_CMD(
+ 	"      (valid chip values 50..57)\n"
+ );
+ #endif
++
++#if defined(CONFIG_I2C_CMD_TREE)
++U_BOOT_CMD(
++	i2c, 6, 1, do_i2c,
++ 	"i2c     - I2C sub-system\n",
++#if defined(CONFIG_I2C_MULTI_BUS)
++	"dev [dev] - show or set current I2C bus\n"
++#endif  /* CONFIG_I2C_MULTI_BUS */
++	"i2c speed [speed] - show or set I2C bus speed\n"
++	"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
++	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
++	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
++	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
++	"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
++	"i2c probe - show devices on the I2C bus\n"
++	"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
++#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
++	"i2c sdram chip - print SDRAM configuration information\n"
++#endif  /* CFG_CMD_SDRAM */
++);
++#endif  /* CONFIG_I2C_CMD_TREE */
++
+ #endif	/* CFG_CMD_I2C */
+diff -Naupr u-boot-1.1.6/common/cmd_nand.c u-boot-1.1.6-fsl-1/common/cmd_nand.c
+--- u-boot-1.1.6/common/cmd_nand.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/cmd_nand.c	2006-12-06 10:33:49.000000000 -0600
+@@ -684,178 +684,182 @@ extern int nand_write_oob(struct nand_ch
+ 				size_t len, size_t *retlen, const u_char *buf);
+ 
+ 
+-int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+-    int rcode = 0;
++	int rcode = 0;
+ 
+-    switch (argc) {
+-    case 0:
+-    case 1:
+-	printf ("Usage:\n%s\n", cmdtp->usage);
+-	return 1;
+-    case 2:
+-	if (strcmp(argv[1],"info") == 0) {
+-		int i;
+-
+-		putc ('\n');
+-
+-		for (i=0; i<CFG_MAX_NAND_DEVICE; ++i) {
+-			if(nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN)
+-				continue; /* list only known devices */
+-			printf ("Device %d: ", i);
+-			nand_print(&nand_dev_desc[i]);
+-		}
+-		return 0;
++	switch (argc) {
++	case 0:
++	case 1:
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	case 2:
++		if (strcmp (argv[1], "info") == 0) {
++			int i;
+ 
+-	} else if (strcmp(argv[1],"device") == 0) {
+-		if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+-			puts ("\nno devices available\n");
+-			return 1;
+-		}
+-		printf ("\nDevice %d: ", curr_device);
+-		nand_print(&nand_dev_desc[curr_device]);
+-		return 0;
+-
+-	} else if (strcmp(argv[1],"bad") == 0) {
+-		if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+-			puts ("\nno devices available\n");
+-			return 1;
+-		}
+-		printf ("\nDevice %d bad blocks:\n", curr_device);
+-		nand_print_bad(&nand_dev_desc[curr_device]);
+-		return 0;
++			putc ('\n');
+ 
+-	}
+-	printf ("Usage:\n%s\n", cmdtp->usage);
+-	return 1;
+-    case 3:
+-	if (strcmp(argv[1],"device") == 0) {
+-		int dev = (int)simple_strtoul(argv[2], NULL, 10);
+-
+-		printf ("\nDevice %d: ", dev);
+-		if (dev >= CFG_MAX_NAND_DEVICE) {
+-			puts ("unknown device\n");
+-			return 1;
+-		}
+-		nand_print(&nand_dev_desc[dev]);
+-		/*nand_print (dev);*/
++			for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) {
++				if (nand_dev_desc[i].ChipID ==
++				    NAND_ChipID_UNKNOWN)
++					continue;	/* list only known devices */
++				printf ("Device %d: ", i);
++				nand_print (&nand_dev_desc[i]);
++			}
++			return 0;
++
++		} else if (strcmp (argv[1], "device") == 0) {
++			if ((curr_device < 0)
++			    || (curr_device >= CFG_MAX_NAND_DEVICE)) {
++				puts ("\nno devices available\n");
++				return 1;
++			}
++			printf ("\nDevice %d: ", curr_device);
++			nand_print (&nand_dev_desc[curr_device]);
++			return 0;
++
++		} else if (strcmp (argv[1], "bad") == 0) {
++			if ((curr_device < 0)
++			    || (curr_device >= CFG_MAX_NAND_DEVICE)) {
++				puts ("\nno devices available\n");
++				return 1;
++			}
++			printf ("\nDevice %d bad blocks:\n", curr_device);
++			nand_print_bad (&nand_dev_desc[curr_device]);
++			return 0;
+ 
+-		if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
+-			return 1;
+ 		}
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	case 3:
++		if (strcmp (argv[1], "device") == 0) {
++			int dev = (int) simple_strtoul (argv[2], NULL, 10);
+ 
+-		curr_device = dev;
++			printf ("\nDevice %d: ", dev);
++			if (dev >= CFG_MAX_NAND_DEVICE) {
++				puts ("unknown device\n");
++				return 1;
++			}
++			nand_print (&nand_dev_desc[dev]);
++			/*nand_print (dev); */
+ 
+-		puts ("... is now current device\n");
++			if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
++				return 1;
++			}
+ 
+-		return 0;
+-	}
+-	else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) {
+-		struct nand_chip* nand = &nand_dev_desc[curr_device];
+-		ulong off = 0;
+-		ulong size = nand->totlen;
+-		int ret;
++			curr_device = dev;
+ 
+-		printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
+-			curr_device, off, size);
++			puts ("... is now current device\n");
+ 
+-		ret = nand_legacy_erase (nand, off, size, 1);
++			return 0;
++		} else if (strcmp (argv[1], "erase") == 0
++			   && strcmp (argv[2], "clean") == 0) {
++			struct nand_chip *nand = &nand_dev_desc[curr_device];
++			ulong off = 0;
++			ulong size = nand->totlen;
++			int ret;
+ 
+-		printf("%s\n", ret ? "ERROR" : "OK");
++			printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size);
+ 
+-		return ret;
+-	}
++			ret = nand_legacy_erase (nand, off, size, 1);
+ 
+-	printf ("Usage:\n%s\n", cmdtp->usage);
+-	return 1;
+-    default:
+-	/* at least 4 args */
+-
+-	if (strncmp(argv[1], "read", 4) == 0 ||
+-	    strncmp(argv[1], "write", 5) == 0) {
+-		ulong addr = simple_strtoul(argv[2], NULL, 16);
+-		ulong off  = simple_strtoul(argv[3], NULL, 16);
+-		ulong size = simple_strtoul(argv[4], NULL, 16);
+-		int cmd    = (strncmp(argv[1], "read", 4) == 0) ?
+-				NANDRW_READ : NANDRW_WRITE;
+-		int ret, total;
+-		char* cmdtail = strchr(argv[1], '.');
++			printf ("%s\n", ret ? "ERROR" : "OK");
+ 
+-		if (cmdtail && !strncmp(cmdtail, ".oob", 2)) {
+-			/* read out-of-band data */
+-			if (cmd & NANDRW_READ) {
+-				ret = nand_read_oob(nand_dev_desc + curr_device,
+-						    off, size, (size_t *)&total,
+-						    (u_char*)addr);
+-			}
+-			else {
+-				ret = nand_write_oob(nand_dev_desc + curr_device,
+-						     off, size, (size_t *)&total,
+-						     (u_char*)addr);
+-			}
+ 			return ret;
+ 		}
+-		else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2))
+-			cmd |= NANDRW_JFFS2;	/* skip bad blocks */
+-		else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) {
+-			cmd |= NANDRW_JFFS2;	/* skip bad blocks (on read too) */
+-			if (cmd & NANDRW_READ)
+-				cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
+-		}
++
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	default:
++		/* at least 4 args */
++
++		if (strncmp (argv[1], "read", 4) == 0 ||
++		    strncmp (argv[1], "write", 5) == 0) {
++			ulong addr = simple_strtoul (argv[2], NULL, 16);
++			ulong off = simple_strtoul (argv[3], NULL, 16);
++			ulong size = simple_strtoul (argv[4], NULL, 16);
++			int cmd = (strncmp (argv[1], "read", 4) == 0) ?
++				NANDRW_READ : NANDRW_WRITE;
++			int ret, total;
++			char *cmdtail = strchr (argv[1], '.');
++
++			if (cmdtail && !strncmp (cmdtail, ".oob", 2)) {
++				/* read out-of-band data */
++				if (cmd & NANDRW_READ) {
++					ret = nand_read_oob (nand_dev_desc + curr_device,
++							     off, size, (size_t *) & total,
++							     (u_char *) addr);
++				} else {
++					ret = nand_write_oob (nand_dev_desc + curr_device,
++							      off, size, (size_t *) & total,
++							      (u_char *) addr);
++				}
++				return ret;
++			} else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
++				cmd |= NANDRW_JFFS2;	/* skip bad blocks */
++			else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) {
++				cmd |= NANDRW_JFFS2;	/* skip bad blocks (on read too) */
++				if (cmd & NANDRW_READ)
++					cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
++			}
+ #ifdef SXNI855T
+-		/* need ".e" same as ".j" for compatibility with older units */
+-		else if (cmdtail && !strcmp(cmdtail, ".e"))
+-			cmd |= NANDRW_JFFS2;	/* skip bad blocks */
++			/* need ".e" same as ".j" for compatibility with older units */
++			else if (cmdtail && !strcmp (cmdtail, ".e"))
++				cmd |= NANDRW_JFFS2;	/* skip bad blocks */
+ #endif
+ #ifdef CFG_NAND_SKIP_BAD_DOT_I
+-		/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
+-		/* ".i" for image -> read skips bad block (no 0xff) */
+-		else if (cmdtail && !strcmp(cmdtail, ".i")) {
+-			cmd |= NANDRW_JFFS2;	/* skip bad blocks (on read too) */
+-			if (cmd & NANDRW_READ)
+-				cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
+-		}
++			/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
++			/* ".i" for image -> read skips bad block (no 0xff) */
++			else if (cmdtail && !strcmp (cmdtail, ".i")) {
++				cmd |= NANDRW_JFFS2;	/* skip bad blocks (on read too) */
++				if (cmd & NANDRW_READ)
++					cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
++			}
+ #endif /* CFG_NAND_SKIP_BAD_DOT_I */
+-		else if (cmdtail) {
+-			printf ("Usage:\n%s\n", cmdtp->usage);
+-			return 1;
+-		}
++			else if (cmdtail) {
++				printf ("Usage:\n%s\n", cmdtp->usage);
++				return 1;
++			}
+ 
+-		printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
+-			(cmd & NANDRW_READ) ? "read" : "write",
+-			curr_device, off, size);
+-
+-		ret = nand_legacy_rw(nand_dev_desc + curr_device, cmd, off, size,
+-			     (size_t *)&total, (u_char*)addr);
+-
+-		printf (" %d bytes %s: %s\n", total,
+-			(cmd & NANDRW_READ) ? "read" : "written",
+-			ret ? "ERROR" : "OK");
+-
+-		return ret;
+-	} else if (strcmp(argv[1],"erase") == 0 &&
+-		   (argc == 4 || strcmp("clean", argv[2]) == 0)) {
+-		int clean = argc == 5;
+-		ulong off = simple_strtoul(argv[2 + clean], NULL, 16);
+-		ulong size = simple_strtoul(argv[3 + clean], NULL, 16);
+-		int ret;
+-
+-		printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
+-			curr_device, off, size);
++			printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
++				(cmd & NANDRW_READ) ? "read" : "write",
++				curr_device, off, size);
++
++			ret = nand_legacy_rw (nand_dev_desc + curr_device,
++					      cmd, off, size,
++					      (size_t *) & total,
++					      (u_char *) addr);
++
++			printf (" %d bytes %s: %s\n", total,
++				(cmd & NANDRW_READ) ? "read" : "written",
++				ret ? "ERROR" : "OK");
+ 
+-		ret = nand_legacy_erase (nand_dev_desc + curr_device,
+-					off, size, clean);
++			return ret;
++		} else if (strcmp (argv[1], "erase") == 0 &&
++			   (argc == 4 || strcmp ("clean", argv[2]) == 0)) {
++			int clean = argc == 5;
++			ulong off =
++				simple_strtoul (argv[2 + clean], NULL, 16);
++			ulong size =
++				simple_strtoul (argv[3 + clean], NULL, 16);
++			int ret;
+ 
+-		printf("%s\n", ret ? "ERROR" : "OK");
++			printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
++				curr_device, off, size);
+ 
+-		return ret;
+-	} else {
+-		printf ("Usage:\n%s\n", cmdtp->usage);
+-		rcode = 1;
+-	}
++			ret = nand_legacy_erase (nand_dev_desc + curr_device,
++						 off, size, clean);
+ 
+-	return rcode;
+-    }
++			printf ("%s\n", ret ? "ERROR" : "OK");
++
++			return ret;
++		} else {
++			printf ("Usage:\n%s\n", cmdtp->usage);
++			rcode = 1;
++		}
++
++		return rcode;
++	}
+ }
+ 
+ U_BOOT_CMD(
+diff -Naupr u-boot-1.1.6/common/cyclon2.c u-boot-1.1.6-fsl-1/common/cyclon2.c
+--- u-boot-1.1.6/common/cyclon2.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/cyclon2.c	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,305 @@
++/*
++ * (C) Copyright 2006
++ * Heiko Schocher, hs@denx.de
++ * Based on ACE1XK.c
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <common.h>		/* core U-Boot definitions */
++#include <altera.h>
++#include <ACEX1K.h>		/* ACEX device family */
++
++#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
++
++/* Define FPGA_DEBUG to get debug printf's */
++#ifdef	FPGA_DEBUG
++#define PRINTF(fmt,args...)	printf (fmt ,##args)
++#else
++#define PRINTF(fmt,args...)
++#endif
++
++/* Note: The assumption is that we cannot possibly run fast enough to
++ * overrun the device (the Slave Parallel mode can free run at 50MHz).
++ * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
++ * the board config file to slow things down.
++ */
++#ifndef CONFIG_FPGA_DELAY
++#define CONFIG_FPGA_DELAY()
++#endif
++
++#ifndef CFG_FPGA_WAIT
++#define CFG_FPGA_WAIT CFG_HZ/10		/* 100 ms */
++#endif
++
++static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
++static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
++/* static int CYC2_ps_info( Altera_desc *desc ); */
++static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
++
++/* ------------------------------------------------------------------------- */
++/* CYCLON2 Generic Implementation */
++int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
++{
++	int ret_val = FPGA_FAIL;
++
++	switch (desc->iface) {
++	case passive_serial:
++		PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
++		ret_val = CYC2_ps_load (desc, buf, bsize);
++		break;
++
++		/* Add new interface types here */
++
++	default:
++		printf ("%s: Unsupported interface type, %d\n",
++				__FUNCTION__, desc->iface);
++	}
++
++	return ret_val;
++}
++
++int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
++{
++	int ret_val = FPGA_FAIL;
++
++	switch (desc->iface) {
++	case passive_serial:
++		PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
++		ret_val = CYC2_ps_dump (desc, buf, bsize);
++		break;
++
++		/* Add new interface types here */
++
++	default:
++		printf ("%s: Unsupported interface type, %d\n",
++				__FUNCTION__, desc->iface);
++	}
++
++	return ret_val;
++}
++
++int CYC2_info( Altera_desc *desc )
++{
++	return FPGA_SUCCESS;
++}
++
++int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
++{
++	int ret_val = FPGA_FAIL;	/* assume a failure */
++
++	if (desc->family != Altera_CYC2) {
++		printf ("%s: Unsupported family type, %d\n",
++				__FUNCTION__, desc->family);
++		return FPGA_FAIL;
++	} else
++		switch (desc->iface) {
++		case passive_serial:
++			ret_val = CYC2_ps_reloc (desc, reloc_offset);
++			break;
++
++		/* Add new interface types here */
++
++		default:
++			printf ("%s: Unsupported interface type, %d\n",
++					__FUNCTION__, desc->iface);
++		}
++
++	return ret_val;
++}
++
++/* ------------------------------------------------------------------------- */
++/* CYCLON2 Passive Serial Generic Implementation                                  */
++static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
++{
++	int ret_val = FPGA_FAIL;	/* assume the worst */
++	Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
++	int	ret = 0;
++
++	PRINTF ("%s: start with interface functions @ 0x%p\n",
++			__FUNCTION__, fn);
++
++	if (fn) {
++		int cookie = desc->cookie;	/* make a local copy */
++		unsigned long ts;		/* timestamp */
++
++		PRINTF ("%s: Function Table:\n"
++				"ptr:\t0x%p\n"
++				"struct: 0x%p\n"
++				"config:\t0x%p\n"
++				"status:\t0x%p\n"
++				"write:\t0x%p\n"
++				"done:\t0x%p\n\n",
++				__FUNCTION__, &fn, fn, fn->config, fn->status,
++				fn->write, fn->done);
++#ifdef CFG_FPGA_PROG_FEEDBACK
++		printf ("Loading FPGA Device %d...", cookie);
++#endif
++
++		/*
++		 * Run the pre configuration function if there is one.
++		 */
++		if (*fn->pre) {
++			(*fn->pre) (cookie);
++		}
++
++		/* Establish the initial state */
++		(*fn->config) (TRUE, TRUE, cookie);	/* Assert nCONFIG */
++
++		udelay(2);		/* T_cfg > 2us	*/
++
++		/* Wait for nSTATUS to be asserted */
++		ts = get_timer (0);		/* get current time */
++		do {
++			CONFIG_FPGA_DELAY ();
++			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
++				puts ("** Timeout waiting for STATUS to go high.\n");
++				(*fn->abort) (cookie);
++				return FPGA_FAIL;
++			}
++		} while (!(*fn->status) (cookie));
++
++		/* Get ready for the burn */
++		CONFIG_FPGA_DELAY ();
++
++		ret = (*fn->write) (buf, bsize, TRUE, cookie);
++		if (ret) {
++			puts ("** Write failed.\n");
++			(*fn->abort) (cookie);
++			return FPGA_FAIL;
++		}
++#ifdef CFG_FPGA_PROG_FEEDBACK
++		puts(" OK? ...");
++#endif
++
++		CONFIG_FPGA_DELAY ();
++
++#ifdef CFG_FPGA_PROG_FEEDBACK
++		putc (' ');			/* terminate the dotted line */
++#endif
++
++	/*
++	 * Checking FPGA's CONF_DONE signal - correctly booted ?
++	 */
++
++	if ( ! (*fn->done) (cookie) ) {
++		puts ("** Booting failed! CONF_DONE is still deasserted.\n");
++		(*fn->abort) (cookie);
++		return (FPGA_FAIL);
++	}
++#ifdef CFG_FPGA_PROG_FEEDBACK
++	puts(" OK\n");
++#endif
++
++	ret_val = FPGA_SUCCESS;
++
++#ifdef CFG_FPGA_PROG_FEEDBACK
++	if (ret_val == FPGA_SUCCESS) {
++		puts ("Done.\n");
++	}
++	else {
++		puts ("Fail.\n");
++	}
++#endif
++	(*fn->post) (cookie);
++
++	} else {
++		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
++	}
++
++	return ret_val;
++}
++
++static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
++{
++	/* Readback is only available through the Slave Parallel and         */
++	/* boundary-scan interfaces.                                         */
++	printf ("%s: Passive Serial Dumping is unavailable\n",
++			__FUNCTION__);
++	return FPGA_FAIL;
++}
++
++static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
++{
++	int ret_val = FPGA_FAIL;	/* assume the worst */
++	Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
++			(Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
++
++	if (fn) {
++		ulong addr;
++
++		/* Get the relocated table address */
++		addr = (ulong) fn + reloc_offset;
++		fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
++
++		if (!fn_r->relocated) {
++
++			if (memcmp (fn_r, fn,
++						sizeof (Altera_CYC2_Passive_Serial_fns))
++				== 0) {
++				/* good copy of the table, fix the descriptor pointer */
++				desc->iface_fns = fn_r;
++			} else {
++				PRINTF ("%s: Invalid function table at 0x%p\n",
++						__FUNCTION__, fn_r);
++				return FPGA_FAIL;
++			}
++
++			PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
++					desc);
++
++			addr = (ulong) (fn->pre) + reloc_offset;
++			fn_r->pre = (Altera_pre_fn) addr;
++
++			addr = (ulong) (fn->config) + reloc_offset;
++			fn_r->config = (Altera_config_fn) addr;
++
++			addr = (ulong) (fn->status) + reloc_offset;
++			fn_r->status = (Altera_status_fn) addr;
++
++			addr = (ulong) (fn->done) + reloc_offset;
++			fn_r->done = (Altera_done_fn) addr;
++
++			addr = (ulong) (fn->write) + reloc_offset;
++			fn_r->write = (Altera_write_fn) addr;
++
++			addr = (ulong) (fn->abort) + reloc_offset;
++			fn_r->abort = (Altera_abort_fn) addr;
++
++			addr = (ulong) (fn->post) + reloc_offset;
++			fn_r->post = (Altera_post_fn) addr;
++
++			fn_r->relocated = TRUE;
++
++		} else {
++			/* this table has already been moved */
++			/* XXX - should check to see if the descriptor is correct */
++			desc->iface_fns = fn_r;
++		}
++
++		ret_val = FPGA_SUCCESS;
++	} else {
++		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
++	}
++
++	return ret_val;
++}
++
++#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
+diff -Naupr u-boot-1.1.6/common/fpga.c u-boot-1.1.6-fsl-1/common/fpga.c
+--- u-boot-1.1.6/common/fpga.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/fpga.c	2006-11-30 12:34:13.000000000 -0600
+@@ -139,7 +139,7 @@ static int fpga_dev_info( int devnum )
+ 			printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
+ 			ret_val = xilinx_info( desc->devdesc );
+ #else
+-			fpga_no_sup( __FUNCTION__, "Xilinx devices" );
++			fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ #endif
+ 			break;
+ 		case fpga_altera:
+@@ -178,7 +178,7 @@ int fpga_reloc( fpga_type devtype, void 
+ #if CONFIG_FPGA & CFG_FPGA_XILINX
+ 		ret_val = xilinx_reloc( desc, reloc_off );
+ #else
+-		fpga_no_sup( __FUNCTION__, "Xilinx devices" );
++		fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ #endif
+ 		break;
+ 	case fpga_altera:
+@@ -271,7 +271,7 @@ int fpga_load( int devnum, void *buf, si
+ #if CONFIG_FPGA & CFG_FPGA_XILINX
+ 			ret_val = xilinx_load( desc->devdesc, buf, bsize );
+ #else
+-			fpga_no_sup( __FUNCTION__, "Xilinx devices" );
++			fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ #endif
+ 			break;
+ 		case fpga_altera:
+@@ -304,7 +304,7 @@ int fpga_dump( int devnum, void *buf, si
+ #if CONFIG_FPGA & CFG_FPGA_XILINX
+ 			ret_val = xilinx_dump( desc->devdesc, buf, bsize );
+ #else
+-			fpga_no_sup( __FUNCTION__, "Xilinx devices" );
++			fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
+ #endif
+ 			break;
+ 		case fpga_altera:
+diff -Naupr u-boot-1.1.6/common/Makefile u-boot-1.1.6-fsl-1/common/Makefile
+--- u-boot-1.1.6/common/Makefile	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/Makefile	2006-11-30 12:34:13.000000000 -0600
+@@ -41,7 +41,7 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.
+ 	  cmd_pci.o cmd_pcmcia.o cmd_portio.o \
+ 	  cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
+ 	  cmd_usb.o cmd_vfd.o \
+-	  command.o console.o devices.o dlmalloc.o docecc.o \
++	  command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
+ 	  environment.o env_common.o \
+ 	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
+ 	  env_nvram.o env_nowhere.o \
+diff -Naupr u-boot-1.1.6/common/memsize.c u-boot-1.1.6-fsl-1/common/memsize.c
+--- u-boot-1.1.6/common/memsize.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/common/memsize.c	2006-11-30 12:34:13.000000000 -0600
+@@ -21,6 +21,16 @@
+  * MA 02111-1307 USA
+  */
+ 
++#include <config.h>
++#ifdef __PPC__
++/*
++ * At least on G2 PowerPC cores, sequential accesses to non-existent
++ * memory must be synchronized.
++ */
++# include <asm/io.h>	/* for sync() */
++#else
++# define sync()		/* nothing */
++#endif
+ 
+ /*
+  * Check memory range for valid RAM. A simple memory test determines
+@@ -38,20 +48,27 @@ long get_ram_size(volatile long *base, l
+ 
+ 	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+ 		addr = base + cnt;	/* pointer arith! */
++		sync ();
+ 		save[i++] = *addr;
++		sync ();
+ 		*addr = ~cnt;
+ 	}
+ 
+ 	addr = base;
++	sync ();
+ 	save[i] = *addr;
++	sync ();
+ 	*addr = 0;
+ 
++	sync ();
+ 	if ((val = *addr) != 0) {
+ 		/* Restore the original data before leaving the function.
+ 		 */
++		sync ();
+ 		*addr = save[i];
+ 		for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
+ 			addr  = base + cnt;
++			sync ();
+ 			*addr = save[--i];
+ 		}
+ 		return (0);
+diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/cpu.c u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu.c
+--- u-boot-1.1.6/cpu/74xx_7xx/cpu.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu.c	2006-12-06 10:33:49.000000000 -0600
+@@ -101,6 +101,10 @@ get_cpu_type(void)
+ 		type = CPU_7457;
+ 		break;
+ 
++	case 0x8004:
++		type = CPU_7448;
++		break;
++
+ 	default:
+ 		break;
+ 	}
+@@ -152,6 +156,10 @@ int checkcpu (void)
+ 		str = "MPC7410";
+ 		break;
+ 
++	case CPU_7448:
++		str = "MPC7448";
++		break;
++
+ 	case CPU_7450:
+ 		str = "MPC7450";
+ 		break;
+@@ -221,7 +229,7 @@ soft_restart(unsigned long addr)
+ void
+ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+ {
+-    	ulong addr;
++	ulong addr;
+ 	/* flush and disable I/D cache */
+ 	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
+ 	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
+diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/cpu_init.c u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu_init.c
+--- u-boot-1.1.6/cpu/74xx_7xx/cpu_init.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu_init.c	2006-12-06 10:33:49.000000000 -0600
+@@ -43,6 +43,7 @@ cpu_init_f (void)
+ 	case CPU_7450:
+ 	case CPU_7455:
+ 	case CPU_7457:
++	case CPU_7448:
+ 		/* enable the timebase bit in HID0 */
+ 		set_hid0(get_hid0() | 0x4000000);
+ 		break;
+diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/speed.c u-boot-1.1.6-fsl-1/cpu/74xx_7xx/speed.c
+--- u-boot-1.1.6/cpu/74xx_7xx/speed.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/speed.c	2006-12-06 10:33:49.000000000 -0600
+@@ -91,6 +91,7 @@ int get_clocks (void)
+ 
+ 	/* calculate the clock frequency based upon the CPU type */
+ 	switch (get_cpu_type()) {
++	case CPU_7448:
+ 	case CPU_7455:
+ 	case CPU_7457:
+ 		/*
+diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/start.S u-boot-1.1.6-fsl-1/cpu/74xx_7xx/start.S
+--- u-boot-1.1.6/cpu/74xx_7xx/start.S	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/start.S	2006-12-06 10:33:49.000000000 -0600
+@@ -44,7 +44,8 @@
+ 
+ #if !defined(CONFIG_DB64360) && \
+     !defined(CONFIG_DB64460) && \
+-    !defined(CONFIG_CPCI750)
++    !defined(CONFIG_CPCI750) && \
++    !defined(CONFIG_P3Mx)
+ #include <galileo/gt64260R.h>
+ #endif
+ 
+@@ -270,7 +271,7 @@ in_flash:
+ 	 * gt-regs BAT can be reused after board_init_f calls
+ 	 * board_early_init_f (EVB only).
+ 	 */
+-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC)
++#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
+ 	/* enable address translation */
+ 	bl	enable_addr_trans
+ 	sync
+@@ -757,7 +758,8 @@ in_ram:
+     defined(CONFIG_DB64360)	 || \
+     defined(CONFIG_DB64460)      || \
+     defined(CONFIG_CPCI750)	|| \
+-    defined(CONFIG_PPMC7XX)
++    defined(CONFIG_PPMC7XX)     || \
++    defined(CONFIG_P3Mx)
+ 	mr	r4, r9		/* Use RAM copy of the global data */
+ #endif
+ 	bl	after_reloc
+diff -Naupr u-boot-1.1.6/cpu/mpc5xxx/cpu.c u-boot-1.1.6-fsl-1/cpu/mpc5xxx/cpu.c
+--- u-boot-1.1.6/cpu/mpc5xxx/cpu.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc5xxx/cpu.c	2006-12-06 10:33:49.000000000 -0600
+@@ -31,6 +31,10 @@
+ #include <mpc5xxx.h>
+ #include <asm/processor.h>
+ 
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+ int checkcpu (void)
+@@ -102,3 +106,26 @@ unsigned long get_tbclk (void)
+ }
+ 
+ /* ------------------------------------------------------------------------- */
++
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_cpu_setup(void *blob, bd_t *bd)
++{
++	u32 *p;
++	int len;
++
++	/* Core XLB bus frequency */
++	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
++	if (p != NULL)
++		*p = cpu_to_be32(bd->bi_busfreq);
++
++	/* SOC peripherals use the IPB bus frequency */
++	p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
++	if (p != NULL)
++		*p = cpu_to_be32(bd->bi_ipbfreq);
++
++	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len);
++	if (p != NULL)
++		memcpy(p, bd->bi_enetaddr, 6);
++}
++#endif
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/cpu.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu.c
+--- u-boot-1.1.6/cpu/mpc83xx/cpu.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu.c	2006-11-30 12:34:13.000000000 -0600
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright 2004 Freescale Semiconductor, Inc.
++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+  *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+@@ -18,11 +18,6 @@
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *	     Initial file creating (porting from 85XX & 8260)
+  */
+ 
+ /*
+@@ -43,35 +38,140 @@ DECLARE_GLOBAL_DATA_PTR;
+ 
+ int checkcpu(void)
+ {
++	volatile immap_t *immr;
+ 	ulong clock = gd->cpu_clk;
+ 	u32 pvr = get_pvr();
++	u32 spridr;
+ 	char buf[32];
+ 
++	immr = (immap_t *)CFG_IMMR;
++
+ 	if ((pvr & 0xFFFF0000) != PVR_83xx) {
+ 		puts("Not MPC83xx Family!!!\n");
+ 		return -1;
+ 	}
+ 
+-	puts("CPU:   MPC83xx, ");
+-	switch(pvr) {
+-	case PVR_8349_REV10:
++	spridr = immr->sysconf.spridr;
++	puts("CPU: ");
++	switch(spridr) {
++	case SPR_8349E_REV10:
++	case SPR_8349E_REV11:
++		puts("MPC8349E, ");
++		break;
++	case SPR_8349_REV10:
++	case SPR_8349_REV11:
++		puts("MPC8349, ");
++		break;
++	case SPR_8347E_REV10_TBGA:
++	case SPR_8347E_REV11_TBGA:
++	case SPR_8347E_REV10_PBGA:
++	case SPR_8347E_REV11_PBGA:
++		puts("MPC8347E, ");
++		break;
++	case SPR_8347_REV10_TBGA:
++	case SPR_8347_REV11_TBGA:
++	case SPR_8347_REV10_PBGA:
++	case SPR_8347_REV11_PBGA:
++		puts("MPC8347, ");
++		break;
++	case SPR_8343E_REV10:
++	case SPR_8343E_REV11:
++		puts("MPC8343E, ");
+ 		break;
+-	case PVR_8349_REV11:
++	case SPR_8343_REV10:
++	case SPR_8343_REV11:
++		puts("MPC8343, ");
++		break;
++	case SPR_8360E_REV10:
++	case SPR_8360E_REV11:
++	case SPR_8360E_REV12:
++		puts("MPC8360E, ");
++		break;
++	case SPR_8360_REV10:
++	case SPR_8360_REV11:
++	case SPR_8360_REV12:
++		puts("MPC8360, ");
+ 		break;
+ 	default:
+ 		puts("Rev: Unknown\n");
+ 		return -1;	/* Not sure what this is */
+ 	}
+-	printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4,
+-		(pvr & 0x0f), strmhz(buf, clock));
+ 
++#if defined(CONFIG_MPC8349)
++	printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock));
++#else
++	printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
++#endif
+ 	return 0;
+ }
+ 
+ 
++/*
++ * Program a UPM with the code supplied in the table.
++ *
++ * The 'dummy' variable is used to increment the MAD. 'dummy' is
++ * supposed to be a pointer to the memory of the device being
++ * programmed by the UPM.  The data in the MDR is written into
++ * memory and the MAD is incremented every time there's a read
++ * from 'dummy'. Unfortunately, the current prototype for this
++ * function doesn't allow for passing the address of this
++ * device, and changing the prototype will break a number lots
++ * of other code, so we need to use a round-about way of finding
++ * the value for 'dummy'.
++ *
++ * The value can be extracted from the base address bits of the
++ * Base Register (BR) associated with the specific UPM.  To find
++ * that BR, we need to scan all 8 BRs until we find the one that
++ * has its MSEL bits matching the UPM we want.  Once we know the
++ * right BR, we can extract the base address bits from it.
++ *
++ * The MxMR and the BR and OR of the chosen bank should all be
++ * configured before calling this function.
++ *
++ * Parameters:
++ * upm: 0=UPMA, 1=UPMB, 2=UPMC
++ * table: Pointer to an array of values to program
++ * size: Number of elements in the array.  Must be 64 or less.
++ */
+ void upmconfig (uint upm, uint *table, uint size)
+ {
+-	hang();		/* FIXME: upconfig() needed? */
++#if defined(CONFIG_MPC834X)
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
++	volatile lbus83xx_t *lbus = &immap->lbus;
++	volatile uchar *dummy = NULL;
++	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
++	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
++	uint i;
++
++	/* Scan all the banks to determine the base address of the device */
++	for (i = 0; i < 8; i++) {
++		if ((lbus->bank[i].br & BR_MSEL) == msel) {
++			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
++			break;
++		}
++	}
++
++	if (!dummy) {
++		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
++		hang();
++	}
++
++	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
++	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
++
++	for (i = 0; i < size; i++) {
++		lbus->mdr = table[i];
++		__asm__ __volatile__ ("sync");
++		*dummy;	/* Write the value to memory and increment MAD */
++		__asm__ __volatile__ ("sync");
++	}
++
++	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
++	*mxmr &= 0xCFFFFFC0;
++#else
++	printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
++	hang();
++#endif
+ }
+ 
+ 
+@@ -83,7 +183,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, i
+ 	ulong addr;
+ #endif
+ 
+-	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
++	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ 
+ #ifdef MPC83xx_RESET
+ 	/* Interrupts and MMU off */
+@@ -150,9 +250,21 @@ unsigned long get_tbclk(void)
+ #if defined(CONFIG_WATCHDOG)
+ void watchdog_reset (void)
+ {
+-	hang();		/* FIXME: implement watchdog_reset()? */
++#ifdef CONFIG_MPC834X
++	int re_enable = disable_interrupts();
++
++	/* Reset the 83xx watchdog */
++	volatile immap_t *immr = (immap_t *) CFG_IMMR;
++	immr->wdt.swsrr = 0x556c;
++	immr->wdt.swsrr = 0xaa39;
++
++	if (re_enable)
++		enable_interrupts ();
++#else
++	hang();
++#endif
+ }
+-#endif /* CONFIG_WATCHDOG */
++#endif
+ 
+ #if defined(CONFIG_OF_FLAT_TREE)
+ void
+@@ -180,12 +292,12 @@ ft_cpu_setup(void *blob, bd_t *bd)
+ 		*p = cpu_to_be32(clock);
+ 
+ #ifdef CONFIG_MPC83XX_TSEC1
+-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len);
++	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
+ 		memcpy(p, bd->bi_enetaddr, 6);
+ #endif
+ 
+ #ifdef CONFIG_MPC83XX_TSEC2
+-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len);
++	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
+ 		memcpy(p, bd->bi_enet1addr, 6);
+ #endif
+ }
+@@ -194,8 +306,8 @@ ft_cpu_setup(void *blob, bd_t *bd)
+ #if defined(CONFIG_DDR_ECC)
+ void dma_init(void)
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile dma8349_t *dma = &immap->dma;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile dma83xx_t *dma = &immap->dma;
+ 	volatile u32 status = swab32(dma->dmasr0);
+ 	volatile u32 dmamr0 = swab32(dma->dmamr0);
+ 
+@@ -225,8 +337,8 @@ void dma_init(void)
+ 
+ uint dma_check(void)
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile dma8349_t *dma = &immap->dma;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile dma83xx_t *dma = &immap->dma;
+ 	volatile u32 status = swab32(dma->dmasr0);
+ 	volatile u32 byte_count = swab32(dma->dmabcr0);
+ 
+@@ -244,8 +356,8 @@ uint dma_check(void)
+ 
+ int dma_xfer(void *dest, u32 count, void *src)
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile dma8349_t *dma = &immap->dma;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile dma83xx_t *dma = &immap->dma;
+ 	volatile u32 dmamr0;
+ 
+ 	/* initialize DMASARn, DMADAR and DMAABCRn */
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/cpu_init.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu_init.c
+--- u-boot-1.1.6/cpu/mpc83xx/cpu_init.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu_init.c	2006-11-30 12:34:13.000000000 -0600
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright 2004 Freescale Semiconductor, Inc.
++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+  *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+@@ -18,11 +18,6 @@
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *           Initial file creating (porting from 85XX & 8260)
+  */
+ 
+ #include <common.h>
+@@ -31,6 +26,30 @@
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
++#ifdef CONFIG_QE
++extern qe_iop_conf_t qe_iop_conf_tab[];
++extern void qe_config_iopin(u8 port, u8 pin, int dir,
++			 int open_drain, int assign);
++extern void qe_init(uint qe_base);
++extern void qe_reset(void);
++
++static void config_qe_ioports(void)
++{
++	u8	port, pin;
++	int	dir, open_drain, assign;
++	int	i;
++
++	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
++		port		= qe_iop_conf_tab[i].port;
++		pin		= qe_iop_conf_tab[i].pin;
++		dir		= qe_iop_conf_tab[i].dir;
++		open_drain	= qe_iop_conf_tab[i].open_drain;
++		assign		= qe_iop_conf_tab[i].assign;
++		qe_config_iopin(port, pin, dir, open_drain, assign);
++	}
++}
++#endif
++
+ /*
+  * Breathe some life into the CPU...
+  *
+@@ -46,6 +65,37 @@ void cpu_init_f (volatile immap_t * im)
+ 	/* Clear initial global data */
+ 	memset ((void *) gd, 0, sizeof (gd_t));
+ 
++	/* system performance tweaking */
++
++#ifdef CFG_ACR_PIPE_DEP
++	/* Arbiter pipeline depth */
++	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
++#endif
++
++#ifdef CFG_SPCR_TSEC1EP
++	/* TSEC1 Emergency priority */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT);
++#endif
++
++#ifdef CFG_SPCR_TSEC2EP
++	/* TSEC2 Emergency priority */
++	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT);
++#endif
++
++#ifdef CFG_SCCR_TSEC1CM
++	/* TSEC1 clock mode */
++	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT);
++#endif
++#ifdef CFG_SCCR_TSEC2CM
++	/* TSEC2 & I2C1 clock mode */
++	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT);
++#endif
++
++#ifdef CFG_ACR_RPTCNT
++	/* Arbiter repeat count */
++	im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT));
++#endif
++
+ 	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
+ 	gd->reset_status = im->reset.rsr;
+ 	im->reset.rsr = ~(RSR_RES);
+@@ -69,6 +119,10 @@ void cpu_init_f (volatile immap_t * im)
+ #ifdef CFG_SICRL
+ 	im->sysconf.sicrl = CFG_SICRL;
+ #endif
++#ifdef CONFIG_QE
++	/* Config QE ioports */
++	config_qe_ioports();
++#endif
+ 
+ 	/*
+ 	 * Memory Controller:
+@@ -157,12 +211,12 @@ void cpu_init_f (volatile immap_t * im)
+ #endif
+ }
+ 
+-
+-/*
+- * Initialize higher level parts of CPU like time base and timers.
+- */
+-
+ int cpu_init_r (void)
+ {
++#ifdef CONFIG_QE
++	uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */
++	qe_init(qe_base);
++	qe_reset();
++#endif
+ 	return 0;
+ }
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/i2c.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/i2c.c
+--- u-boot-1.1.6/cpu/mpc83xx/i2c.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/i2c.c	1969-12-31 18:00:00.000000000 -0600
+@@ -1,253 +0,0 @@
+-/*
+- * (C) Copyright 2003,Motorola Inc.
+- * Xianghua Xiao <x.xiao@motorola.com>
+- * Adapted for Motorola 85xx chip.
+- *
+- * (C) Copyright 2003
+- * Gleb Natapov <gnatapov@mrv.com>
+- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
+- *
+- * Hardware I2C driver for MPC107 PCI bridge.
+- *
+- * See file CREDITS for list of people who contributed to this
+- * project.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2 of
+- * the License, or (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+- * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *           Initial file creating (porting from 85XX & 8260)
+- */
+-
+-#include <common.h>
+-#include <command.h>
+-#include <asm/io.h>
+-
+-#ifdef CONFIG_HARD_I2C
+-#include <i2c.h>
+-#include <asm/i2c.h>
+-
+-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
+-i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
+-#endif
+-
+-void
+-i2c_init(int speed, int slaveadd)
+-{
+-	/* stop I2C controller */
+-	writeb(0x00 , &I2C->cr);
+-
+-	/* set clock */
+-	writeb(0x3f, &I2C->fdr);
+-
+-	/* set default filter */
+-	writeb(0x10,&I2C->dfsrr);
+-
+-	/* write slave address */
+-	writeb(slaveadd, &I2C->adr);
+-
+-	/* clear status register */
+-	writeb(0x00, &I2C->sr);
+-
+-	/* start I2C controller */
+-	writeb(I2C_CR_MEN, &I2C->cr);
+-}
+-
+-static __inline__ int
+-i2c_wait4bus (void)
+-{
+-	ulong timeval = get_timer (0);
+-	while (readb(&I2C->sr) & I2C_SR_MBB) {
+-		if (get_timer (timeval) > I2C_TIMEOUT) {
+-			return -1;
+-		}
+-	}
+-	return 0;
+-}
+-
+-static __inline__ int
+-i2c_wait (int write)
+-{
+-	u32 csr;
+-	ulong timeval = get_timer(0);
+-	do {
+-		csr = readb(&I2C->sr);
+-
+-		if (!(csr & I2C_SR_MIF))
+-			continue;
+-
+-		writeb(0x0, &I2C->sr);
+-
+-		if (csr & I2C_SR_MAL) {
+-			debug("i2c_wait: MAL\n");
+-			return -1;
+-		}
+-
+-		if (!(csr & I2C_SR_MCF))	{
+-			debug("i2c_wait: unfinished\n");
+-			return -1;
+-		}
+-
+-		if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
+-			debug("i2c_wait: No RXACK\n");
+-			return -1;
+-		}
+-
+-		return 0;
+-	} while (get_timer (timeval) < I2C_TIMEOUT);
+-
+-	debug("i2c_wait: timed out\n");
+-	return -1;
+-}
+-
+-static __inline__ int
+-i2c_write_addr (u8 dev, u8 dir, int rsta)
+-{
+-	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
+-	       (rsta?I2C_CR_RSTA:0),
+-	       &I2C->cr);
+-
+-	writeb((dev << 1) | dir, &I2C->dr);
+-
+-	if (i2c_wait (I2C_WRITE) < 0)
+-		return 0;
+-	return 1;
+-}
+-
+-static __inline__ int
+-__i2c_write (u8 *data, int length)
+-{
+-	int i;
+-
+-	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+-	       &I2C->cr);
+-
+-	for (i=0; i < length; i++) {
+-		writeb(data[i], &I2C->dr);
+-
+-		if (i2c_wait (I2C_WRITE) < 0)
+-			break;
+-	}
+-	return i;
+-}
+-
+-static __inline__ int
+-__i2c_read (u8 *data, int length)
+-{
+-	int i;
+-
+-	writeb(I2C_CR_MEN | I2C_CR_MSTA |
+-	       ((length == 1) ? I2C_CR_TXAK : 0),
+-	       &I2C->cr);
+-
+-	/* dummy read */
+-	readb(&I2C->dr);
+-
+-	for (i=0; i < length; i++) {
+-		if (i2c_wait (I2C_READ) < 0)
+-			break;
+-
+-		/* Generate ack on last next to last byte */
+-		if (i == length - 2)
+-			writeb(I2C_CR_MEN | I2C_CR_MSTA |
+-			       I2C_CR_TXAK,
+-			       &I2C->cr);
+-
+-		/* Generate stop on last byte */
+-		if (i == length - 1)
+-			writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
+-
+-		data[i] = readb(&I2C->dr);
+-	}
+-	return i;
+-}
+-
+-int
+-i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
+-{
+-	int i = 0;
+-	u8 *a = (u8*)&addr;
+-
+-	if (i2c_wait4bus () < 0)
+-		goto exit;
+-
+-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+-		goto exit;
+-
+-	if (__i2c_write (&a[4 - alen], alen) != alen)
+-		goto exit;
+-
+-	if (i2c_write_addr (dev, I2C_READ, 1) == 0)
+-		goto exit;
+-
+-	i = __i2c_read (data, length);
+-
+- exit:
+-	writeb(I2C_CR_MEN, &I2C->cr);
+-	return !(i == length);
+-}
+-
+-int
+-i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
+-{
+-	int i = 0;
+-	u8 *a = (u8*)&addr;
+-
+-	if (i2c_wait4bus () < 0)
+-		goto exit;
+-
+-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+-		goto exit;
+-
+-	if (__i2c_write (&a[4 - alen], alen) != alen)
+-		goto exit;
+-
+-	i = __i2c_write (data, length);
+-
+- exit:
+-	writeb(I2C_CR_MEN, &I2C->cr);
+-	return !(i == length);
+-}
+-
+-int i2c_probe (uchar chip)
+-{
+-	int tmp;
+-
+-	/*
+-	 * Try to read the first location of the chip.  The underlying
+-	 * driver doesn't appear to support sending just the chip address
+-	 * and looking for an <ACK> back.
+-	 */
+-	udelay(10000);
+-	return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
+-}
+-
+-uchar i2c_reg_read (uchar i2c_addr, uchar reg)
+-{
+-	uchar buf[1];
+-
+-	i2c_read (i2c_addr, reg, 1, buf, 1);
+-
+-	return (buf[0]);
+-}
+-
+-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
+-{
+-	i2c_write (i2c_addr, reg, 1, &val, 1);
+-}
+-
+-#endif /* CONFIG_HARD_I2C */
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/interrupts.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/interrupts.c
+--- u-boot-1.1.6/cpu/mpc83xx/interrupts.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/interrupts.c	2006-11-30 12:34:13.000000000 -0600
+@@ -21,13 +21,6 @@
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *           Initial file creating (porting from 85XX & 8260)
+  */
+ 
+ #include <common.h>
+@@ -45,7 +38,7 @@ struct irq_action {
+ 
+ int interrupt_init_cpu (unsigned *decrementer_count)
+ {
+-	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
++	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ 
+ 	*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
+ 
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/Makefile u-boot-1.1.6-fsl-1/cpu/mpc83xx/Makefile
+--- u-boot-1.1.6/cpu/mpc83xx/Makefile	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/Makefile	2006-11-10 11:24:29.000000000 -0600
+@@ -27,9 +27,9 @@ include $(TOPDIR)/config.mk
+ 
+ LIB	= $(obj)lib$(CPU).a
+ 
+-START	= start.o resetvec.o
++START	= start.o
+ COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
+-	  i2c.o spd_sdram.o
++	  spd_sdram.o qe_io.o
+ 
+ SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+ OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/qe_io.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/qe_io.c
+--- u-boot-1.1.6/cpu/mpc83xx/qe_io.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/qe_io.c	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,85 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on source code of Shlomi Gridish
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include "common.h"
++#include "asm/errno.h"
++#include "asm/io.h"
++#include "asm/immap_83xx.h"
++
++#if defined(CONFIG_QE)
++#define	NUM_OF_PINS	32
++void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
++{
++	u32			pin_2bit_mask;
++	u32			pin_2bit_dir;
++	u32			pin_2bit_assign;
++	u32			pin_1bit_mask;
++	u32			tmp_val;
++	volatile immap_t	*im = (volatile immap_t *)CFG_IMMR;
++	volatile gpio83xx_t	*par_io =(volatile gpio83xx_t *)&im->gpio;
++
++	/* Caculate pin location and 2bit mask and dir */
++	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
++	pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
++
++	/* Setup the direction */
++	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
++		in_be32(&par_io->ioport[port].dir2) :
++		in_be32(&par_io->ioport[port].dir1);
++
++	if (pin > (NUM_OF_PINS/2) -1) {
++		out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
++		out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
++	} else {
++		out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
++		out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
++	}
++
++	/* Calculate pin location for 1bit mask */
++	pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
++
++	/* Setup the open drain */
++	tmp_val = in_be32(&par_io->ioport[port].podr);
++	if (open_drain) {
++		out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
++	} else {
++		out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
++	}
++
++	/* Setup the assignment */
++	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
++		in_be32(&par_io->ioport[port].ppar2):
++		in_be32(&par_io->ioport[port].ppar1);
++	pin_2bit_assign = (u32)(assign
++				<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
++
++	/* Clear and set 2 bits mask */
++	if (pin > (NUM_OF_PINS/2) - 1) {
++		out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
++		out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
++	} else {
++		out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
++		out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
++	}
++}
++
++#endif /* CONFIG_QE */
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/resetvec.S u-boot-1.1.6-fsl-1/cpu/mpc83xx/resetvec.S
+--- u-boot-1.1.6/cpu/mpc83xx/resetvec.S	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/resetvec.S	1969-12-31 18:00:00.000000000 -0600
+@@ -1,6 +0,0 @@
+-	.section .resetvec,"ax"
+-#ifndef FIXME
+-#if 0
+-	b _start_e500
+-#endif
+-#endif
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/spd_sdram.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/spd_sdram.c
+--- u-boot-1.1.6/cpu/mpc83xx/spd_sdram.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/spd_sdram.c	2006-12-06 10:33:49.000000000 -0600
+@@ -1,8 +1,10 @@
+ /*
++ * (C) Copyright 2006 Freescale Semiconductor, Inc.
++ *
+  * (C) Copyright 2006
+  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+  *
+- * Copyright 2004 Freescale Semiconductor.
++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+  * (C) Copyright 2003 Motorola Inc.
+  * Xianghua Xiao (X.Xiao@motorola.com)
+  *
+@@ -23,11 +25,6 @@
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *           Initial file creating (porting from 85XX & 8260)
+  */
+ 
+ #include <common.h>
+@@ -39,7 +36,9 @@
+ 
+ #ifdef CONFIG_SPD_EEPROM
+ 
+-#if defined(CONFIG_DDR_ECC)
++DECLARE_GLOBAL_DATA_PTR;
++
++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ extern void dma_init(void);
+ extern uint dma_check(void);
+ extern int dma_xfer(void *dest, uint count, void *src);
+@@ -52,16 +51,16 @@ extern int dma_xfer(void *dest, uint cou
+ /*
+  * Convert picoseconds into clock cycles (rounding up if needed).
+  */
+-
+ int
+ picos_to_clk(int picos)
+ {
++	unsigned int ddr_bus_clk;
+ 	int clks;
+ 
+-	clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
+-	if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
+-	clks++;
+-	}
++	ddr_bus_clk = gd->ddr_clk >> 1;
++	clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
++	if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0)
++		clks++;
+ 
+ 	return clks;
+ }
+@@ -103,33 +102,72 @@ static void spd_debug(spd_eeprom_t *spd)
+ 
+ long int spd_sdram()
+ {
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile ddr8349_t *ddr = &immap->ddr;
+-	volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0];
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile ddr83xx_t *ddr = &immap->ddr;
++	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
+ 	spd_eeprom_t spd;
+-	unsigned tmp, tmp1;
+ 	unsigned int memsize;
+ 	unsigned int law_size;
+-	unsigned char caslat;
+-	unsigned int trfc, trfc_clk, trfc_low;
++	unsigned char caslat, caslat_ctrl;
++	unsigned char burstlen;
++	unsigned int max_bus_clk;
++	unsigned int max_data_rate, effective_data_rate;
++	unsigned int ddrc_clk;
++	unsigned int refresh_clk;
++	unsigned sdram_cfg;
++	unsigned int ddrc_ecc_enable;
+ 
++	/* Read SPD parameters with I2C */
+ 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
+ #ifdef SPD_DEBUG
+ 	spd_debug(&spd);
+ #endif
++	/* Check the memory type */
++	if (spd.mem_type != SPD_MEMTYPE_DDR) {
++		printf("DDR: Module mem type is %02X\n", spd.mem_type);
++		return 0;
++	}
++
++	/* Check the number of physical bank */
+ 	if (spd.nrows > 2) {
+-		puts("DDR:Only two chip selects are supported on ADS.\n");
++		printf("DDR: The number of physical bank is %02X\n", spd.nrows);
+ 		return 0;
+ 	}
+ 
+-	if (spd.nrow_addr < 12
+-	    || spd.nrow_addr > 14
+-	    || spd.ncol_addr < 8
+-	    || spd.ncol_addr > 11) {
+-		puts("DDR:Row or Col number unsupported.\n");
++	/* Check if the number of row of the module is in the range of DDRC */
++	if (spd.nrow_addr < 12 || spd.nrow_addr > 14) {
++		printf("DDR: Row number is out of range of DDRC, row=%02X\n",
++							 spd.nrow_addr);
+ 		return 0;
+ 	}
+ 
++	/* Check if the number of col of the module is in the range of DDRC */
++	if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
++		printf("DDR: Col number is out of range of DDRC, col=%02X\n",
++							 spd.ncol_addr);
++		return 0;
++	}
++	/* Setup DDR chip select register */
++#ifdef CFG_83XX_DDR_USES_CS0
++	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
++	ddr->cs_config[0] = ( 1 << 31
++			    | (spd.nrow_addr - 12) << 8
++			    | (spd.ncol_addr - 8) );
++	debug("\n");
++	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
++	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
++
++	if (spd.nrows == 2) {
++		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
++				  | ((banksize(spd.row_dens) >> 23) - 1) );
++		ddr->cs_config[1] = ( 1<<31
++				    | (spd.nrow_addr-12) << 8
++				    | (spd.ncol_addr-8) );
++		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
++		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
++	}
++
++#else
+ 	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+ 	ddr->cs_config[2] = ( 1 << 31
+ 			    | (spd.nrow_addr - 12) << 8
+@@ -147,6 +185,7 @@ long int spd_sdram()
+ 		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
+ 		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
+ 	}
++#endif
+ 
+ 	if (spd.mem_type != 0x07) {
+ 		puts("No DDR module found!\n");
+@@ -172,56 +211,136 @@ long int spd_sdram()
+ 	debug("DDR:ar=0x%08x\n", ecm->ar);
+ 
+ 	/*
+-	 * find the largest CAS
+-	 */
+-	if(spd.cas_lat & 0x40) {
+-		caslat = 7;
+-	} else if (spd.cas_lat & 0x20) {
+-		caslat = 6;
+-	} else if (spd.cas_lat & 0x10) {
+-		caslat = 5;
+-	} else if (spd.cas_lat & 0x08) {
+-		caslat = 4;
+-	} else if (spd.cas_lat & 0x04) {
+-		caslat = 3;
+-	} else if (spd.cas_lat & 0x02) {
+-		caslat = 2;
+-	} else if (spd.cas_lat & 0x01) {
+-		caslat = 1;
+-	} else {
+-		puts("DDR:no valid CAS Latency information.\n");
++	 * Find the largest CAS by locating the highest 1 bit
++	 * in the spd.cas_lat field.  Translate it to a DDR
++	 * controller field value:
++	 *
++	 *	CAS Lat	 DDR I	   Ctrl
++	 *	Clocks	 SPD Bit   Value
++	 *	-------+--------+---------
++	 *	1.0	   0	    001
++	 *	1.5	   1	    010
++	 *	2.0	   2	    011
++	 *	2.5	   3	    100
++	 *	3.0	   4	    101
++	 *	3.5	   5	    110
++	 *	4.0	   6	    111
++	 */
++	caslat = __ilog2(spd.cas_lat);
++
++	if (caslat > 6 ) {
++		printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n",
++			spd.cas_lat);
+ 		return 0;
+ 	}
+-
+-	tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+-		       + (spd.clk_cycle & 0x0f));
+-	debug("DDR:Module maximum data rate is: %dMhz\n", tmp);
+-
+-	tmp1 = get_bus_freq(0) / 1000000;
+-	if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) {
+-		/* 90~230 range, treated as DDR 200 */
+-		if (spd.clk_cycle3 == 0xa0)
+-			caslat -= 2;
+-		else if(spd.clk_cycle2 == 0xa0)
+-			caslat--;
+-	} else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) {
+-		/* 230-280 range, treated as DDR 266 */
+-		if (spd.clk_cycle3 == 0x75)
+-			caslat -= 2;
+-		else if (spd.clk_cycle2 == 0x75)
+-			caslat--;
+-	} else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) {
+-		/* 280~350 range, treated as DDR 333 */
+-		if (spd.clk_cycle3 == 0x60)
+-			caslat -= 2;
+-		else if (spd.clk_cycle2 == 0x60)
+-			caslat--;
+-	} else if (tmp1 < 90 || tmp1 >= 350) {
+-		/* DDR rate out-of-range */
+-		puts("DDR:platform frequency is not fit for DDR rate\n");
+-		return 0;
++	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
++			+ (spd.clk_cycle & 0x0f));
++	max_data_rate = max_bus_clk * 2;
++
++	debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
++
++	ddrc_clk = gd->ddr_clk / 1000000;
++
++	if (max_data_rate >= 390) { /* it is DDR 400 */
++		if (ddrc_clk <= 410 && ddrc_clk > 350) {
++			/* DDR controller clk at 350~410 */
++			effective_data_rate = 400; /* 5ns */
++			caslat = caslat;
++		} else if (ddrc_clk <= 350 && ddrc_clk > 280) {
++			/* DDR controller clk at 280~350 */
++			effective_data_rate = 333; /* 6ns */
++			if (spd.clk_cycle2 == 0x60)
++				caslat = caslat - 1;
++			else
++				caslat = caslat;
++		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
++			/* DDR controller clk at 230~280 */
++			effective_data_rate = 266; /* 7.5ns */
++			if (spd.clk_cycle3 == 0x75)
++				caslat = caslat - 2;
++			else if (spd.clk_cycle2 == 0x60)
++				caslat = caslat - 1;
++			else
++				caslat = caslat;
++		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
++			/* DDR controller clk at 90~230 */
++			effective_data_rate = 200; /* 10ns */
++			if (spd.clk_cycle3 == 0x75)
++				caslat = caslat - 2;
++			else if (spd.clk_cycle2 == 0x60)
++				caslat = caslat - 1;
++			else
++				caslat = caslat;
++		}
++	} else if (max_data_rate >= 323) { /* it is DDR 333 */
++		if (ddrc_clk <= 350 && ddrc_clk > 280) {
++			/* DDR controller clk at 280~350 */
++			effective_data_rate = 333; /* 6ns */
++			caslat = caslat;
++		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
++			/* DDR controller clk at 230~280 */
++			effective_data_rate = 266; /* 7.5ns */
++			if (spd.clk_cycle2 == 0x75)
++				caslat = caslat - 1;
++			else
++				caslat = caslat;
++		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
++			/* DDR controller clk at 90~230 */
++			effective_data_rate = 200; /* 10ns */
++			if (spd.clk_cycle3 == 0xa0)
++				caslat = caslat - 2;
++			else if (spd.clk_cycle2 == 0x75)
++				caslat = caslat - 1;
++			else
++				caslat = caslat;
++		}
++	} else if (max_data_rate >= 256) { /* it is DDR 266 */
++		if (ddrc_clk <= 350 && ddrc_clk > 280) {
++			/* DDR controller clk at 280~350 */
++			printf("DDR: DDR controller freq is more than "
++				"max data rate of the module\n");
++			return 0;
++		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
++			/* DDR controller clk at 230~280 */
++			effective_data_rate = 266; /* 7.5ns */
++			caslat = caslat;
++		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
++			/* DDR controller clk at 90~230 */
++			effective_data_rate = 200; /* 10ns */
++			if (spd.clk_cycle2 == 0xa0)
++				caslat = caslat - 1;
++		}
++	} else if (max_data_rate >= 190) { /* it is DDR 200 */
++		if (ddrc_clk <= 350 && ddrc_clk > 230) {
++			/* DDR controller clk at 230~350 */
++			printf("DDR: DDR controller freq is more than "
++				"max data rate of the module\n");
++			return 0;
++		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
++			/* DDR controller clk at 90~230 */
++			effective_data_rate = 200; /* 10ns */
++			caslat = caslat;
++		}
+ 	}
+ 
++	debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
++	debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
++
++	/*
++	 * Errata DDR6 work around: input enable 2 cycles earlier.
++	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
++	 */
++	if (caslat == 2)
++		ddr->debug_reg = 0x201c0000; /* CL=2 */
++	else if (caslat == 3)
++		ddr->debug_reg = 0x202c0000; /* CL=2.5 */
++	else if (caslat == 4)
++		ddr->debug_reg = 0x202c0000; /* CL=3.0 */
++
++	__asm__ __volatile__ ("sync");
++
++	debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
++
+ 	/*
+ 	 * note: caslat must also be programmed into ddr->sdram_mode
+ 	 * register.
+@@ -229,16 +348,14 @@ long int spd_sdram()
+ 	 * note: WRREC(Twr) and WRTORD(Twtr) are not in SPD,
+ 	 * use conservative value here.
+ 	 */
+-	trfc = spd.trfc * 1000;         /* up to ps */
+-	trfc_clk = picos_to_clk(trfc);
+-	trfc_low = (trfc_clk - 8) & 0xf;
++	caslat_ctrl = (caslat + 1) & 0x07; /* see as above */
+ 
+ 	ddr->timing_cfg_1 =
+ 	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
+ 	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
+ 	     ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
+-	     ((caslat & 0x07) << 16 ) |
+-	     (trfc_low << 12 ) |
++	     ((caslat_ctrl & 0x07) << 16 ) |
++	     (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
+ 	     ( 0x300 ) |
+ 	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
+ 
+@@ -246,144 +363,143 @@ long int spd_sdram()
+ 
+ 	debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
+ 	debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
++	/* Setup init value, but not enable */
++	ddr->sdram_cfg = 0x42000000;
+ 
+-	/*
+-	 * Only DDR I is supported
+-	 * DDR I and II have different mode-register-set definition
+-	 */
+-	switch(caslat) {
+-	case 2:
+-		tmp = 0x50; /* 1.5 */
+-		break;
+-	case 3:
+-		tmp = 0x20; /* 2.0 */
+-		break;
+-	case 4:
+-		tmp = 0x60; /* 2.5 */
+-		break;
+-	case 5:
+-		tmp = 0x30; /* 3.0 */
+-		break;
+-	default:
+-		puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
+-		return 0;
++	/* Check DIMM data bus width */
++	if (spd.dataw_lsb == 0x20) {
++		burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
++		printf("\n   DDR DIMM: data bus width is 32 bit");
++	} else {
++		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
++		printf("\n   DDR DIMM: data bus width is 64 bit");
++	}
++
++	/* Is this an ECC DDR chip? */
++	if (spd.config == 0x02)
++		printf(" with ECC\n");
++	else
++		printf(" without ECC\n");
++
++	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
++	   Burst type is sequential
++	 */
++	switch (caslat) {
++		case 1:
++			ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
++			break;
++		case 2:
++			ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
++			break;
++		case 3:
++			ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
++			break;
++		case 4:
++			ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
++			break;
++		default:
++			printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
++			return 0;
+ 	}
+-#if defined (CONFIG_DDR_32BIT)
+-	/* set burst length to 8 for 32-bit data path */
+-	tmp |= 0x03;
+-#else
+-	/* set burst length to 4 - default for 64-bit data path */
+-	tmp |= 0x02;
+-#endif
+-	ddr->sdram_mode = tmp;
+ 	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
+ 
+-	switch(spd.refresh) {
+-	case 0x00:
+-	case 0x80:
+-		tmp = picos_to_clk(15625000);
+-		break;
+-	case 0x01:
+-	case 0x81:
+-		tmp = picos_to_clk(3900000);
+-		break;
+-	case 0x02:
+-	case 0x82:
+-		tmp = picos_to_clk(7800000);
+-		break;
+-	case 0x03:
+-	case 0x83:
+-		tmp = picos_to_clk(31300000);
+-		break;
+-	case 0x04:
+-	case 0x84:
+-		tmp = picos_to_clk(62500000);
+-		break;
+-	case 0x05:
+-	case 0x85:
+-		tmp = picos_to_clk(125000000);
+-		break;
+-	default:
+-		tmp = 0x512;
+-		break;
++	switch (spd.refresh) {
++		case 0x00:
++		case 0x80:
++			refresh_clk = picos_to_clk(15625000);
++			break;
++		case 0x01:
++		case 0x81:
++			refresh_clk = picos_to_clk(3900000);
++			break;
++		case 0x02:
++		case 0x82:
++			refresh_clk = picos_to_clk(7800000);
++			break;
++		case 0x03:
++		case 0x83:
++			refresh_clk = picos_to_clk(31300000);
++			break;
++		case 0x04:
++		case 0x84:
++			refresh_clk = picos_to_clk(62500000);
++			break;
++		case 0x05:
++		case 0x85:
++			refresh_clk = picos_to_clk(125000000);
++			break;
++		default:
++			refresh_clk = 0x512;
++			break;
+ 	}
+ 
+ 	/*
+ 	 * Set BSTOPRE to 0x100 for page mode
+ 	 * If auto-charge is used, set BSTOPRE = 0
+ 	 */
+-	ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
++	ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
+ 	debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
+ 
+-	/*
+-	 * Is this an ECC DDR chip?
++	/* SS_EN = 0, source synchronous disable
++	 * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
+ 	 */
+-#if defined(CONFIG_DDR_ECC)
+-	if (spd.config == 0x02) {
+-		/* disable error detection */
+-		ddr->err_disable = ~ECC_ERROR_ENABLE;
++	ddr->sdram_clk_cntl = 0x00000000;
++	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
+ 
+-		/* set single bit error threshold to maximum value,
+-		 * reset counter to zero */
+-		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+-			(0 << ECC_ERROR_MAN_SBEC_SHIFT);
+-	}
+-	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
+-	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
+-#endif
+ 	asm("sync;isync");
+ 
+-	udelay(500);
++	udelay(600);
+ 
+ 	/*
+-	 * SS_EN=1,
+-	 * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
+-	 * clock cycle after address/command
+-	 */
+-	/*ddr->sdram_clk_cntl = 0x82000000;*/
+-	ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05);
+-
+-	/*
+-	 * Figure out the settings for the sdram_cfg register.  Build up
+-	 * the entire register in 'tmp' before writing since the write into
++	 * Figure out the settings for the sdram_cfg register. Build up
++	 * the value in 'sdram_cfg' before writing since the write into
+ 	 * the register will actually enable the memory controller, and all
+ 	 * settings must be done before enabling.
+ 	 *
+ 	 * sdram_cfg[0]   = 1 (ddr sdram logic enable)
+ 	 * sdram_cfg[1]   = 1 (self-refresh-enable)
+ 	 * sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM)
++	 * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
++	 * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
+ 	 */
+-	tmp = 0xc2000000;
++	sdram_cfg = 0xC2000000;
+ 
+-#if defined (CONFIG_DDR_32BIT)
+-	/* in 32-Bit mode burst len is 8 beats */
+-	tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+-#endif
+-	/*
+-	 * sdram_cfg[3] = RD_EN - registered DIMM enable
+-	 *   A value of 0x26 indicates micron registered DIMMS (micron.com)
+-	 */
+-	if (spd.mod_attr == 0x26) {
+-		tmp |= 0x10000000;
+-	}
++	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
++	if (spd.mod_attr & 0x02)
++		sdram_cfg |= 0x10000000;
++
++	/* The DIMM is 32bit width */
++	if (spd.dataw_lsb == 0x20)
++		sdram_cfg |= 0x000C0000;
++
++	ddrc_ecc_enable = 0;
+ 
+ #if defined(CONFIG_DDR_ECC)
+-	/*
+-	 * If the user wanted ECC (enabled via sdram_cfg[2])
+-	 */
++	/* Enable ECC with sdram_cfg[2] */
+ 	if (spd.config == 0x02) {
+-		tmp |= SDRAM_CFG_ECC_EN;
++		sdram_cfg |= 0x20000000;
++		ddrc_ecc_enable = 1;
++		/* disable error detection */
++		ddr->err_disable = ~ECC_ERROR_ENABLE;
++		/* set single bit error threshold to maximum value,
++		 * reset counter to zero */
++		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
++				(0 << ECC_ERROR_MAN_SBEC_SHIFT);
+ 	}
++
++	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
++	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
+ #endif
++	printf("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
+ 
+ #if defined(CONFIG_DDR_2T_TIMING)
+ 	/*
+ 	 * Enable 2T timing by setting sdram_cfg[16].
+ 	 */
+-	tmp |= SDRAM_CFG_2T_EN;
++	sdram_cfg |= SDRAM_CFG_2T_EN;
+ #endif
+-
+-	ddr->sdram_cfg = tmp;
++	/* Enable controller, and GO! */
++	ddr->sdram_cfg = sdram_cfg;
+ 	asm("sync;isync");
+ 	udelay(500);
+ 
+@@ -392,8 +508,7 @@ long int spd_sdram()
+ }
+ #endif /* CONFIG_SPD_EEPROM */
+ 
+-
+-#if defined(CONFIG_DDR_ECC)
++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ /*
+  * Use timebase counter, get_timer() is not availabe
+  * at this point of initialization yet.
+@@ -429,74 +544,48 @@ static __inline__ unsigned long get_tbms
+ /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */
+ void ddr_enable_ecc(unsigned int dram_size)
+ {
+-	uint *p;
+-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+-	volatile ddr8349_t *ddr = &immap->ddr;
++	volatile immap_t *immap = (immap_t *)CFG_IMMR;
++	volatile ddr83xx_t *ddr= &immap->ddr;
+ 	unsigned long t_start, t_end;
++	register u64 *p;
++	register uint size;
++	unsigned int pattern[2];
+ #if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+ 	uint i;
+ #endif
+-
+-	debug("Initialize a Cachline in DRAM\n");
+ 	icache_enable();
+-
+-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+-	/* Initialise DMA for direct Transfers */
+-	dma_init();
+-#endif
+-
+ 	t_start = get_tbms();
++	pattern[0] = 0xdeadbeef;
++	pattern[1] = 0xdeadbeef;
+ 
+ #if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+-	debug("DDR init: Cache flush method\n");
+-	for (p = 0; p < (uint *)(dram_size); p++) {
+-		if (((unsigned int)p & 0x1f) == 0) {
+-			ppcDcbz((unsigned long) p);
+-		}
+-
+-		/* write pattern to cache and flush */
+-		*p = (unsigned int)0xdeadbeef;
+-
+-		if (((unsigned int)p & 0x1c) == 0x1c) {
+-			ppcDcbf((unsigned long) p);
+-		}
++	debug("ddr init: CPU FP write method\n");
++	size = dram_size;
++	for (p = 0; p < (u64*)(size); p++) {
++		ppcDWstore((u32*)p, pattern);
+ 	}
++	__asm__ __volatile__ ("sync");
+ #else
+-	printf("DDR init: DMA method\n");
+-	for (p = 0; p < (uint *)(8 * 1024); p++) {
+-		/* zero one data cache line */
+-		if (((unsigned int)p & 0x1f) == 0) {
+-			ppcDcbz((unsigned long)p);
+-		}
+-
+-		/* write pattern to it and flush */
+-		*p = (unsigned int)0xdeadbeef;
+-
+-		if (((unsigned int)p & 0x1c) == 0x1c) {
+-			ppcDcbf((unsigned long)p);
+-		}
++	debug("ddr init: DMA method\n");
++	size = 0x2000;
++	for (p = 0; p < (u64*)(size); p++) {
++		ppcDWstore((u32*)p, pattern);
+ 	}
++	__asm__ __volatile__ ("sync");
+ 
+-	/* 8K */
+-	dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
+-	/* 16K */
+-	dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
+-	/* 32K */
+-	dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
+-	/* 64K */
+-	dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
+-	/* 128k */
+-	dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
+-	/* 256k */
+-	dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
+-	/* 512k */
+-	dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
+-	/* 1M */
+-	dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
+-	/* 2M */
+-	dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
+-	/* 4M */
+-	dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
++	/* Initialise DMA for direct transfer */
++	dma_init();
++	/* Start DMA to transfer */
++	dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */
++	dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */
++	dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */
++	dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */
++	dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */
++	dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */
++	dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */
++	dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
++	dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
++	dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
+ 
+ 	for (i = 1; i < dram_size / 0x800000; i++) {
+ 		dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/speed.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/speed.c
+--- u-boot-1.1.6/cpu/mpc83xx/speed.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/speed.c	2006-11-30 12:34:13.000000000 -0600
+@@ -2,7 +2,7 @@
+  * (C) Copyright 2000-2002
+  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+  *
+- * Copyright 2004 Freescale Semiconductor, Inc.
++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+  *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+@@ -21,11 +21,6 @@
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *           Initial file creating (porting from 85XX & 8260)
+  */
+ 
+ #include <common.h>
+@@ -53,38 +48,38 @@ typedef enum {
+ 
+ typedef struct {
+ 	mult_t core_csb_ratio;
+-	mult_t  vco_divider;
++	mult_t vco_divider;
+ } corecnf_t;
+ 
+ corecnf_t corecnf_tab[] = {
+-	{ _byp, _byp},	/* 0x00 */
+-	{ _byp, _byp},	/* 0x01 */
+-	{ _byp, _byp},	/* 0x02 */
+-	{ _byp, _byp},	/* 0x03 */
+-	{ _byp, _byp},	/* 0x04 */
+-	{ _byp, _byp},	/* 0x05 */
+-	{ _byp, _byp},	/* 0x06 */
+-	{ _byp, _byp},	/* 0x07 */
+-	{  _1x,  _x2},	/* 0x08 */
+-	{  _1x,  _x4},	/* 0x09 */
+-	{  _1x,  _x8},	/* 0x0A */
+-	{  _1x,  _x8},	/* 0x0B */
+-	{_1_5x,  _x2},	/* 0x0C */
+-	{_1_5x,  _x4},	/* 0x0D */
+-	{_1_5x,  _x8},	/* 0x0E */
+-	{_1_5x,  _x8},	/* 0x0F */
+-	{  _2x,  _x2},	/* 0x10 */
+-	{  _2x,  _x4},	/* 0x11 */
+-	{  _2x,  _x8},	/* 0x12 */
+-	{  _2x,  _x8},	/* 0x13 */
+-	{_2_5x,  _x2},	/* 0x14 */
+-	{_2_5x,  _x4},	/* 0x15 */
+-	{_2_5x,  _x8},	/* 0x16 */
+-	{_2_5x,  _x8},	/* 0x17 */
+-	{  _3x,  _x2},	/* 0x18 */
+-	{  _3x,  _x4},	/* 0x19 */
+-	{  _3x,  _x8},	/* 0x1A */
+-	{  _3x,  _x8},	/* 0x1B */
++	{_byp, _byp},		/* 0x00 */
++	{_byp, _byp},		/* 0x01 */
++	{_byp, _byp},		/* 0x02 */
++	{_byp, _byp},		/* 0x03 */
++	{_byp, _byp},		/* 0x04 */
++	{_byp, _byp},		/* 0x05 */
++	{_byp, _byp},		/* 0x06 */
++	{_byp, _byp},		/* 0x07 */
++	{_1x, _x2},		/* 0x08 */
++	{_1x, _x4},		/* 0x09 */
++	{_1x, _x8},		/* 0x0A */
++	{_1x, _x8},		/* 0x0B */
++	{_1_5x, _x2},		/* 0x0C */
++	{_1_5x, _x4},		/* 0x0D */
++	{_1_5x, _x8},		/* 0x0E */
++	{_1_5x, _x8},		/* 0x0F */
++	{_2x, _x2},		/* 0x10 */
++	{_2x, _x4},		/* 0x11 */
++	{_2x, _x8},		/* 0x12 */
++	{_2x, _x8},		/* 0x13 */
++	{_2_5x, _x2},		/* 0x14 */
++	{_2_5x, _x4},		/* 0x15 */
++	{_2_5x, _x8},		/* 0x16 */
++	{_2_5x, _x8},		/* 0x17 */
++	{_3x, _x2},		/* 0x18 */
++	{_3x, _x4},		/* 0x19 */
++	{_3x, _x8},		/* 0x1A */
++	{_3x, _x8},		/* 0x1B */
+ };
+ 
+ /* ----------------------------------------------------------------- */
+@@ -92,91 +87,64 @@ corecnf_t corecnf_tab[] = {
+ /*
+  *
+  */
+-int get_clocks (void)
++int get_clocks(void)
+ {
+-	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
++	volatile immap_t *im = (immap_t *) CFG_IMMR;
+ 	u32 pci_sync_in;
+-	u8  spmf;
+-	u8  clkin_div;
++	u8 spmf;
++	u8 clkin_div;
+ 	u32 sccr;
+ 	u32 corecnf_tab_index;
+-	u8  corepll;
++	u8 corepll;
+ 	u32 lcrr;
+ 
+ 	u32 csb_clk;
++#if defined(CONFIG_MPC8349)
+ 	u32 tsec1_clk;
+ 	u32 tsec2_clk;
+-	u32 core_clk;
+ 	u32 usbmph_clk;
+ 	u32 usbdr_clk;
+-	u32 i2c_clk;
++#endif
++	u32 core_clk;
++	u32 i2c1_clk;
++	u32 i2c2_clk;
+ 	u32 enc_clk;
+ 	u32 lbiu_clk;
+ 	u32 lclk_clk;
+ 	u32 ddr_clk;
++#if defined (CONFIG_MPC8360)
++	u32 qepmf;
++	u32 qepdf;
++	u32 ddr_sec_clk;
++	u32 qe_clk;
++	u32 brg_clk;
++#endif
+ 
+-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
++	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ 		return -1;
+ 
+-#ifndef CFG_HRCW_HIGH
+-# error "CFG_HRCW_HIGH must be defined in board config file"
+-#endif /* CFG_HCWD_HIGH */
+-
+-#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST)
+-
+-# ifndef CONFIG_83XX_CLKIN
+-#  error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file"
+-# endif /* CONFIG_83XX_CLKIN */
+-# ifdef CONFIG_83XX_PCICLK
+-#  warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred"
+-# endif /* CONFIG_83XX_PCICLK */
+-
+-	/* PCI Host Mode */
+-	if (!(im->reset.rcwh & RCWH_PCIHOST)) {
+-		/* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
+-		 * the im->reset.rcwhr PCI Host Mode is disabled
+-		 * FIXME: findout if there is a way to issue some warning */
+-		return -2;
+-	}
+-	if (im->clk.spmr & SPMR_CKID) {
+-		/* PCI Clock is half CONFIG_83XX_CLKIN */
+-		pci_sync_in = CONFIG_83XX_CLKIN / 2;
+-	}
+-	else {
+-		pci_sync_in = CONFIG_83XX_CLKIN;
+-	}
+-
+-#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */
++	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
+ 
+-# ifdef CONFIG_83XX_CLKIN
+-#  warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred"
+-# endif /* CONFIG_83XX_CLKIN */
+-# ifndef CONFIG_83XX_PCICLK
+-#  error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file"
+-# endif /* CONFIG_83XX_PCICLK */
+-
+-	/* PCI Agent Mode */
+-	if (im->reset.rcwh & RCWH_PCIHOST) {
+-		/* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
+-		 * the im->reset.rcwhr PCI Host Mode is enabled */
+-		return -3;
++	if (im->reset.rcwh & HRCWH_PCI_HOST) {
++#if defined(CONFIG_83XX_CLKIN)
++		pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
++#else
++		pci_sync_in = 0xDEADBEEF;
++#endif
++	} else {
++#if defined(CONFIG_83XX_PCICLK)
++		pci_sync_in = CONFIG_83XX_PCICLK;
++#else
++		pci_sync_in = 0xDEADBEEF;
++#endif
+ 	}
+-	pci_sync_in = CONFIG_83XX_PCICLK;
+ 
+-#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
+-
+-	/* we have up to date pci_sync_in */
+ 	spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
+-	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
+-
+-	if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
+-		csb_clk	= (pci_sync_in * spmf * (1 + clkin_div)) / 2;
+-	}
+-	else {
+-		csb_clk = pci_sync_in * spmf * (1 + clkin_div);
+-	}
++	csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
+ 
+ 	sccr = im->clk.sccr;
++
++#if defined(CONFIG_MPC8349)
+ 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
+ 	case 0:
+ 		tsec1_clk = 0;
+@@ -212,25 +180,8 @@ int get_clocks (void)
+ 		/* unkown SCCR_TSEC2CM value */
+ 		return -5;
+ 	}
+-	i2c_clk = tsec2_clk;
+ 
+-	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+-	case 0:
+-		enc_clk = 0;
+-		break;
+-	case 1:
+-		enc_clk = csb_clk;
+-		break;
+-	case 2:
+-		enc_clk = csb_clk / 2;
+-		break;
+-	case 3:
+-		enc_clk = csb_clk / 3;
+-		break;
+-	default:
+-		/* unkown SCCR_ENCCM value */
+-		return -6;
+-	}
++	i2c1_clk = tsec2_clk;
+ 
+ 	switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
+ 	case 0:
+@@ -268,14 +219,42 @@ int get_clocks (void)
+ 		return -8;
+ 	}
+ 
+-	if (usbmph_clk != 0
+-		&& usbdr_clk != 0
+-		&& usbmph_clk != usbdr_clk ) {
+-		/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
++	if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
++		/* if USB MPH clock is not disabled and
++		 * USB DR clock is not disabled then
++		 * USB MPH & USB DR must have the same rate
++		 */
+ 		return -9;
+ 	}
++#endif
++#if defined (CONFIG_MPC8360)
++	i2c1_clk = csb_clk;
++#endif
++	i2c2_clk = csb_clk;	/* i2c-2 clk is equal to csb clk */
+ 
+-	lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
++	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
++	case 0:
++		enc_clk = 0;
++		break;
++	case 1:
++		enc_clk = csb_clk;
++		break;
++	case 2:
++		enc_clk = csb_clk / 2;
++		break;
++	case 3:
++		enc_clk = csb_clk / 3;
++		break;
++	default:
++		/* unkown SCCR_ENCCM value */
++		return -6;
++	}
++#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
++	lbiu_clk = csb_clk *
++	           (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
++#else
++#error Unknown MPC83xx chip
++#endif
+ 	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+ 	switch (lcrr) {
+ 	case 2:
+@@ -287,12 +266,20 @@ int get_clocks (void)
+ 		/* unknown lcrr */
+ 		return -10;
+ 	}
+-
+-	ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
+-
++#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
++	ddr_clk = csb_clk *
++		  (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
+ 	corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
++#if defined (CONFIG_MPC8360)
++	ddr_sec_clk = csb_clk * (1 +
++		       ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
++#endif
++#else
++#error Unknown MPC83xx chip
++#endif
++
+ 	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
+-	if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
++	if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
+ 		/* corecnf_tab_index is too high, possibly worng value */
+ 		return -11;
+ 	}
+@@ -309,7 +296,7 @@ int get_clocks (void)
+ 		core_clk = 2 * csb_clk;
+ 		break;
+ 	case _2_5x:
+-		core_clk = ( 5 * csb_clk) / 2;
++		core_clk = (5 * csb_clk) / 2;
+ 		break;
+ 	case _3x:
+ 		core_clk = 3 * csb_clk;
+@@ -319,46 +306,69 @@ int get_clocks (void)
+ 		return -12;
+ 	}
+ 
+-	gd->csb_clk    = csb_clk   ;
+-	gd->tsec1_clk  = tsec1_clk ;
+-	gd->tsec2_clk  = tsec2_clk ;
+-	gd->core_clk   = core_clk  ;
++#if defined (CONFIG_MPC8360)
++	qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
++	qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
++	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
++	brg_clk = qe_clk / 2;
++#endif
++
++	gd->csb_clk = csb_clk;
++#if defined(CONFIG_MPC8349)
++	gd->tsec1_clk = tsec1_clk;
++	gd->tsec2_clk = tsec2_clk;
+ 	gd->usbmph_clk = usbmph_clk;
+-	gd->usbdr_clk  = usbdr_clk ;
+-	gd->i2c_clk    = i2c_clk   ;
+-	gd->enc_clk    = enc_clk   ;
+-	gd->lbiu_clk   = lbiu_clk  ;
+-	gd->lclk_clk   = lclk_clk  ;
+-	gd->ddr_clk    = ddr_clk   ;
+-	gd->pci_clk    = pci_sync_in;
+-
++	gd->usbdr_clk = usbdr_clk;
++#endif
++	gd->core_clk = core_clk;
++	gd->i2c1_clk = i2c1_clk;
++	gd->i2c2_clk = i2c2_clk;
++	gd->enc_clk = enc_clk;
++	gd->lbiu_clk = lbiu_clk;
++	gd->lclk_clk = lclk_clk;
++	gd->ddr_clk = ddr_clk;
++#if defined (CONFIG_MPC8360)
++	gd->ddr_sec_clk = ddr_sec_clk;
++	gd->qe_clk = qe_clk;
++	gd->brg_clk = brg_clk;
++#endif
+ 	gd->cpu_clk = gd->core_clk;
+-	gd->bus_clk = gd->lbiu_clk;
++	gd->bus_clk = gd->csb_clk;
+ 	return 0;
++
+ }
+ 
+ /********************************************
+  * get_bus_freq
+  * return system bus freq in Hz
+  *********************************************/
+-ulong get_bus_freq (ulong dummy)
++ulong get_bus_freq(ulong dummy)
+ {
+ 	return gd->csb_clk;
+ }
+ 
+-int print_clock_conf (void)
++int print_clock_conf(void)
+ {
+ 	printf("Clock configuration:\n");
+-	printf("  Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
+-	printf("  Core:                %4d MHz\n",gd->core_clk/1000000);
+-	debug("  Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
+-	printf("  Local Bus:           %4d MHz\n",gd->lclk_clk/1000000);
+-	debug("  DDR:                 %4d MHz\n",gd->ddr_clk/1000000);
+-	debug("  I2C:                 %4d MHz\n",gd->i2c_clk/1000000);
+-	debug("  TSEC1:               %4d MHz\n",gd->tsec1_clk/1000000);
+-	debug("  TSEC2:               %4d MHz\n",gd->tsec2_clk/1000000);
+-	debug("  USB MPH:             %4d MHz\n",gd->usbmph_clk/1000000);
+-	debug("  USB DR:              %4d MHz\n",gd->usbdr_clk/1000000);
+-
++	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
++	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
++#if defined (CONFIG_MPC8360)
++	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
++#endif
++	printf("  Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
++	printf("  Local Bus:           %4d MHz\n", gd->lclk_clk / 1000000);
++	printf("  DDR:                 %4d MHz\n", gd->ddr_clk / 1000000);
++#if defined (CONFIG_MPC8360)
++	printf("  DDR Secondary:       %4d MHz\n", gd->ddr_sec_clk / 1000000);
++#endif
++	printf("  SEC:                 %4d MHz\n", gd->enc_clk / 1000000);
++	printf("  I2C1:                %4d MHz\n", gd->i2c1_clk / 1000000);
++	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
++#if defined(CONFIG_MPC8349)
++	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
++	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
++	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
++	printf("  USB DR:              %4d MHz\n", gd->usbdr_clk / 1000000);
++#endif
+ 	return 0;
+ }
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/start.S u-boot-1.1.6-fsl-1/cpu/mpc83xx/start.S
+--- u-boot-1.1.6/cpu/mpc83xx/start.S	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/start.S	2006-11-10 11:24:29.000000000 -0600
+@@ -2,7 +2,7 @@
+  * Copyright (C) 1998  Dan Malek <dmalek@jlc.net>
+  * Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+  * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
+- * Copyright 2004 Freescale Semiconductor, Inc.
++ * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved.
+  *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+@@ -104,9 +104,9 @@ version_string:
+ #ifndef CONFIG_DEFAULT_IMMR
+ #error CONFIG_DEFAULT_IMMR must be defined
+ #endif /* CFG_DEFAULT_IMMR */
+-#ifndef CFG_IMMRBAR
+-#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
+-#endif /* CFG_IMMRBAR */
++#ifndef CFG_IMMR
++#define CFG_IMMR CONFIG_DEFAULT_IMMR
++#endif /* CFG_IMMR */
+ 
+ /*
+  * After configuration, a system reset exception is executed using the
+@@ -152,8 +152,8 @@ boot_cold: /* time t 3 */
+ 	nop
+ boot_warm: /* time t 5 */
+ 	mfmsr	r5			/* save msr contents	*/
+-	lis	r3, CFG_IMMRBAR@h
+-	ori	r3, r3, CFG_IMMRBAR@l
++	lis	r3, CFG_IMMR@h
++	ori	r3, r3, CFG_IMMR@l
+ 	stw	r3, IMMRBAR(r4)
+ 
+ 	/* Initialise the E300 processor core		*/
+@@ -226,7 +226,7 @@ in_flash:
+ 	GET_GOT			/* initialize GOT access	*/
+ 
+ 	/* r3: IMMR */
+-	lis	r3, CFG_IMMRBAR@h
++	lis	r3, CFG_IMMR@h
+ 	/* run low-level CPU init code (in Flash)*/
+ 	bl	cpu_init_f
+ 
+@@ -446,7 +446,7 @@ init_e300_core: /* time t 10 */
+ 	mtspr	SRR1, r3			/* Make SRR1 match MSR */
+ 
+ 
+-	lis	r3, CFG_IMMRBAR@h
++	lis	r3, CFG_IMMR@h
+ #if defined(CONFIG_WATCHDOG)
+ 	/* Initialise the Wathcdog values and reset it (if req) */
+ 	/*------------------------------------------------------*/
+@@ -870,6 +870,18 @@ ppcDcbz:
+ 	dcbz	r0,r3
+ 	blr
+ 
++	.globl	ppcDWstore
++ppcDWstore:
++	lfd	1, 0(r4)
++	stfd	1, 0(r3)
++	blr
++
++	.globl	ppcDWload
++ppcDWload:
++	lfd	1, 0(r3)
++	stfd	1, 0(r4)
++	blr
++
+ /*-------------------------------------------------------------------*/
+ 
+ /*
+@@ -1189,7 +1201,7 @@ map_flash_by_law1:
+ 	/* When booting from ROM (Flash or EPROM), clear the  */
+ 	/* Address Mask in OR0 so ROM appears everywhere      */
+ 	/*----------------------------------------------------*/
+-	lis	r3, (CFG_IMMRBAR)@h  /* r3 <= CFG_IMMRBAR    */
++	lis	r3, (CFG_IMMR)@h  /* r3 <= CFG_IMMR    */
+ 	lwz	r4, OR0@l(r3)
+ 	li	r5, 0x7fff        /* r5 <= 0x00007FFFF */
+ 	and	r4, r4, r5
+@@ -1214,8 +1226,15 @@ map_flash_by_law1:
+ 	lis r4, (CFG_FLASH_BASE)@h
+ 	ori r4, r4, (CFG_FLASH_BASE)@l
+ 	stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
+-	lis r4, (0x80000016)@h
+-	ori r4, r4, (0x80000016)@l
++
++	/* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */
++	lis r4, (0x80000012)@h
++	ori r4, r4, (0x80000012)@l
++	li r5, CFG_FLASH_SIZE
++1:	srawi. r5, r5, 1	/* r5 = r5 >> 1 */
++	addi r4, r4, 1
++	bne 1b
++
+ 	stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
+ 	blr
+ 
+@@ -1234,17 +1253,23 @@ remap_flash_by_law0:
+ 	stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
+ 
+ 	lwz r4, OR0(r3)
+-	lis r5, 0xFF80 /* 8M */
++	lis r5, ~((CFG_FLASH_SIZE << 4) - 1)
+ 	or r4, r4, r5
+-	stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
++	stw r4, OR0(r3)
+ 
+ 	lis r4, (CFG_FLASH_BASE)@h
+ 	ori r4, r4, (CFG_FLASH_BASE)@l
+ 	stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
+ 
+-	lis r4, (0x80000016)@h
+-	ori r4, r4, (0x80000016)@l
+-	stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
++	/* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */
++	lis r4, (0x80000012)@h
++	ori r4, r4, (0x80000012)@l
++	li r5, CFG_FLASH_SIZE
++1:	srawi. r5, r5, 1 /* r5 = r5 >> 1 */
++	addi r4, r4, 1
++	bne 1b
++	stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
++
+ 
+ 	xor r4, r4, r4
+ 	stw r4, LBLAWBAR1(r3)
+diff -Naupr u-boot-1.1.6/cpu/mpc83xx/traps.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/traps.c
+--- u-boot-1.1.6/cpu/mpc83xx/traps.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/traps.c	2006-11-30 12:34:13.000000000 -0600
+@@ -1,5 +1,8 @@
+ /*
+- * linux/arch/ppc/kernel/traps.c
++ * (C) Copyright 2000
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+  *
+  * This program is free software; you can redistribute it and/or
+  * modify it under the terms of the GNU General Public License as
+@@ -15,19 +18,6 @@
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+- *
+- * Change log:
+- *
+- * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+- *
+- * Modified by Cort Dougan (cort@cs.nmt.edu)
+- * and Paul Mackerras (paulus@cs.anu.edu.au)
+- *
+- * (C) Copyright 2000
+- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+- *
+- * 20050101: Eran Liberty (liberty@freescale.com)
+- *           Initial file creating (porting from 85XX & 8260)
+  */
+ 
+ /*
+diff -Naupr u-boot-1.1.6/cpu/ppc4xx/405gp_pci.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/405gp_pci.c
+--- u-boot-1.1.6/cpu/ppc4xx/405gp_pci.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/405gp_pci.c	2006-11-30 12:34:13.000000000 -0600
+@@ -475,7 +475,11 @@ void pci_440_init (struct pci_controller
+ 	pci_set_region(hose->regions + reg_num++,
+ 		       CFG_PCI_TARGBASE,
+ 		       CFG_PCI_MEMBASE,
++#ifdef CFG_PCI_MEMSIZE
++		       CFG_PCI_MEMSIZE,
++#else
+ 		       0x10000000,
++#endif
+ 		       PCI_REGION_MEM );
+ 
+ #if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
+diff -Naupr u-boot-1.1.6/cpu/ppc4xx/4xx_enet.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/4xx_enet.c
+--- u-boot-1.1.6/cpu/ppc4xx/4xx_enet.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/4xx_enet.c	2006-11-30 12:34:13.000000000 -0600
+@@ -264,10 +264,10 @@ int ppc_4xx_eth_setup_bridge(int devnum,
+ 		bis->bi_phymode[3] = BI_PHYMODE_ZMII;
+ 		break;
+ 	case 2:
+-		zmiifer = ZMII_FER_SMII << ZMII_FER_V(0);
+-		zmiifer = ZMII_FER_SMII << ZMII_FER_V(1);
+-		zmiifer = ZMII_FER_SMII << ZMII_FER_V(2);
+-		zmiifer = ZMII_FER_SMII << ZMII_FER_V(3);
++		zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
++		zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
++		zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2);
++		zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3);
+ 		bis->bi_phymode[0] = BI_PHYMODE_ZMII;
+ 		bis->bi_phymode[1] = BI_PHYMODE_ZMII;
+ 		bis->bi_phymode[2] = BI_PHYMODE_ZMII;
+@@ -470,8 +470,7 @@ static int ppc_4xx_eth_init (struct eth_
+ #else
+ 	if ((devnum == 0) || (devnum == 1)) {
+ 		out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+-	}
+-	else { /* ((devnum == 2) || (devnum == 3)) */
++	} else { /* ((devnum == 2) || (devnum == 3)) */
+ 		out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
+ 		out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
+ 				   (RGMII_FER_RGMII << RGMII_FER_V (3))));
+@@ -561,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_
+ 	 * otherwise, just check the speeds & feeds
+ 	 */
+ 	if (hw_p->first_init == 0) {
+-#if defined(CONFIG_88E1111_CLK_DELAY)
+-		/*
+-		 * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
+-		 * the "RGMII transmit timing control" and "RGMII receive
+-		 * timing control" bits set, so that Gbit communication works
+-		 * without problems.
+-		 * Also set the "Transmitter disable" to 1 to enable the
+-		 * transmitter.
+-		 * After setting these bits a soft-reset must occur for this
+-		 * change to become active.
+-		 */
+-		miiphy_read (dev->name, reg, 0x14, &reg_short);
+-		reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
+-		miiphy_write (dev->name, reg, 0x14, reg_short);
+-#endif
+-#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
++#if defined(CONFIG_M88E1111_PHY)
+ 		miiphy_write (dev->name, reg, 0x14, 0x0ce3);
+ 		miiphy_write (dev->name, reg, 0x18, 0x4101);
+ 		miiphy_write (dev->name, reg, 0x09, 0x0e00);
+@@ -808,7 +792,7 @@ static int ppc_4xx_eth_init (struct eth_
+ 		hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
+ 		hw_p->rx_ready[i] = -1;
+ #if 0
+-		printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr);
++		printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr);
+ #endif
+ 	}
+ 
+diff -Naupr u-boot-1.1.6/cpu/ppc4xx/cpu.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu.c
+--- u-boot-1.1.6/cpu/ppc4xx/cpu.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu.c	2006-12-06 10:33:49.000000000 -0600
+@@ -41,6 +41,10 @@
+ DECLARE_GLOBAL_DATA_PTR;
+ #endif
+ 
++#if defined(CONFIG_BOARD_RESET)
++void board_reset(void);
++#endif
++
+ #if defined(CONFIG_440)
+ #define FREQ_EBC		(sys_info.freqEPB)
+ #else
+@@ -336,6 +340,10 @@ int checkcpu (void)
+ 		puts("SP Rev. B");
+ 		break;
+ 
++	case PVR_440SP_RC:
++		puts("SP Rev. C");
++		break;
++
+ 	case PVR_440SPe_RA:
+ 		puts("SPe Rev. A");
+ 		break;
+@@ -422,23 +430,19 @@ int ppc440spe_revB() {
+ 
+ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+ {
+-#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)
+-	/*give reset to BCSR*/
+-	*(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09;
+-
++#if defined(CONFIG_BOARD_RESET)
++	board_reset();
++#else
++#if defined(CFG_4xx_RESET_TYPE)
++	mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28);
+ #else
+-
+ 	/*
+ 	 * Initiate system reset in debug control register DBCR
+ 	 */
+-	__asm__ __volatile__("lis   3, 0x3000" ::: "r3");
+-#if defined(CONFIG_440)
+-	__asm__ __volatile__("mtspr 0x134, 3");
+-#else
+-	__asm__ __volatile__("mtspr 0x3f2, 3");
+-#endif
++	mtspr(dbcr0, 0x30000000);
++#endif /* defined(CFG_4xx_RESET_TYPE) */
++#endif /* defined(CONFIG_BOARD_RESET) */
+ 
+-#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/
+ 	return 1;
+ }
+ 
+diff -Naupr u-boot-1.1.6/cpu/ppc4xx/cpu_init.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu_init.c
+--- u-boot-1.1.6/cpu/ppc4xx/cpu_init.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu_init.c	2006-11-30 12:34:13.000000000 -0600
+@@ -321,6 +321,10 @@ cpu_init_f (void)
+ #else
+ 	val |= 0xf0000000;      /* generate system reset after 2.684 seconds */
+ #endif
++#if defined(CFG_4xx_RESET_TYPE)
++	val &= ~0x30000000;			/* clear WRC bits */
++	val |= CFG_4xx_RESET_TYPE << 28;	/* set board specific WRC type */
++#endif
+ 	mtspr(tcr, val);
+ 
+ 	val = mfspr(tsr);
+diff -Naupr u-boot-1.1.6/cpu/ppc4xx/sdram.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/sdram.c
+--- u-boot-1.1.6/cpu/ppc4xx/sdram.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/sdram.c	2006-11-30 12:34:13.000000000 -0600
+@@ -351,6 +351,14 @@ long int initdram(int board_type)
+ 	int i;
+ 	int tr1_bank1;
+ 
++#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
++	/*
++	 * Soft-reset SDRAM controller.
++	 */
++	mtsdr(sdr_srst, SDR0_SRST_DMC);
++	mtsdr(sdr_srst, 0x00000000);
++#endif
++
+ 	for (i=0; i<N_MB0CF; i++) {
+ 		/*
+ 		 * Disable memory controller.
+diff -Naupr u-boot-1.1.6/cpu/ppc4xx/start.S u-boot-1.1.6-fsl-1/cpu/ppc4xx/start.S
+--- u-boot-1.1.6/cpu/ppc4xx/start.S	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/start.S	2006-11-30 12:34:13.000000000 -0600
+@@ -204,6 +204,18 @@ _start_440:
+ 	mfspr	r1,mcsr
+ 	mtspr	mcsr,r1
+ #endif
++
++	/*----------------------------------------------------------------*/
++	/* CCR0 init */
++	/*----------------------------------------------------------------*/
++	/* Disable store gathering & broadcast, guarantee inst/data
++	* cache block touch, force load/store alignment
++	* (see errata 1.12: 440_33)
++	*/
++	lis	r1,0x0030	/* store gathering & broadcast disable */
++	ori	r1,r1,0x6000	/* cache touch */
++	mtspr	ccr0,r1
++
+ 	/*----------------------------------------------------------------*/
+ 	/* Initialize debug */
+ 	/*----------------------------------------------------------------*/
+@@ -225,17 +237,6 @@ _start_440:
+ 	mtspr	dbsr,r1		/* Clear all valid bits */
+ skip_debug_init:
+ 
+-	/*----------------------------------------------------------------*/
+-	/* CCR0 init */
+-	/*----------------------------------------------------------------*/
+-	/* Disable store gathering & broadcast, guarantee inst/data
+-	* cache block touch, force load/store alignment
+-	* (see errata 1.12: 440_33)
+-	*/
+-	lis	r1,0x0030	/* store gathering & broadcast disable */
+-	ori	r1,r1,0x6000	/* cache touch */
+-	mtspr	ccr0,r1
+-
+ #if defined (CONFIG_440SPE)
+ 	/*----------------------------------------------------------------+
+ 	| Initialize Core Configuration Reg1.
+diff -Naupr u-boot-1.1.6/CREDITS u-boot-1.1.6-fsl-1/CREDITS
+--- u-boot-1.1.6/CREDITS	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/CREDITS	2006-11-10 11:24:28.000000000 -0600
+@@ -465,3 +465,8 @@ N: James MacAulay
+ E: james.macaulay@amirix.com
+ D: Suppport for Amirix AP1000
+ W: www.amirix.com
++
++N: Timur Tabi
++E: timur@freescale.com
++D: Support for MPC8349E-mITX
++W: www.freescale.com
+diff -Naupr u-boot-1.1.6/doc/README.mpc8360emds u-boot-1.1.6-fsl-1/doc/README.mpc8360emds
+--- u-boot-1.1.6/doc/README.mpc8360emds	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/doc/README.mpc8360emds	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,126 @@
++Freescale MPC8360EMDS Board
++-----------------------------------------
++1.	Board Switches and Jumpers
++1.0 	There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
++	For some reason, the HW designers describe the switch settings
++	in terms of 0 and 1, and then map that to physical switches where
++	the label "On" refers to logic 0 and "Off" is logic 1.
++
++	Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
++	bits may contribute to signals that are numbered based at 0,
++	and some of those signals may be high-bit-number-0 too.  Heed
++	well the names and labels and do not get confused.
++
++		"Off" == 1
++		"On"  == 0
++
++	SW18 is switch 18 as silk-screened onto the board.
++	SW4[8] is the bit labled 8 on Switch 4.
++	SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
++	SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
++	SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
++		and bits labeled 8 is set as "Off".
++
++1.1	For the MPC8360E PB PROTO Board
++
++	First, make sure the board default setting is consistent with the
++	document shipped with your board. Then apply the following setting:
++	SW3[1-8]= 0000_0100  (HRCW setting value is performed on local bus)
++	SW4[1-8]= 0011_0000  (Flash boot on local bus)
++	SW9[1-8]= 0110_0110  (PCI Mode enabled. HRCW is read from FLASH)
++	SW10[1-8]= 0000_1000  (core PLL setting)
++	SW11[1-8]= 0000_0100 (SW11 is on the another side of the board)
++	JP6 1-2
++	on board Oscillator: 66M
++
++
++2.	Memory Map
++
++2.1.	The memory map should look pretty much like this:
++
++	0x0000_0000	0x7fff_ffff	DDR			2G
++	0x8000_0000	0x8fff_ffff	PCI MEM prefetch	256M
++	0x9000_0000	0x9fff_ffff	PCI MEM non-prefetch	256M
++	0xc000_0000	0xdfff_ffff	Empty			512M
++	0xe000_0000	0xe01f_ffff	Int Mem Reg Space	2M
++	0xe020_0000	0xe02f_ffff	Empty			1M
++	0xe030_0000	0xe03f_ffff	PCI IO			1M
++	0xe040_0000	0xefff_ffff	Empty			252M
++	0xf000_0000	0xf3ff_ffff	Local Bus SDRAM		64M
++	0xf400_0000	0xf7ff_ffff	Empty			64M
++	0xf800_0000	0xf800_7fff	BCSR on CS1		32K
++	0xf800_8000	0xf800_ffff	PIB CS4			32K
++	0xf801_0000	0xf801_7fff	PIB CS5			32K
++	0xfe00_0000	0xfeff_ffff	FLASH on CS0		16M
++
++
++3. Definitions
++
++3.1 Explanation of NEW definitions in:
++
++	include/configs/MPC8360EMDS.h
++
++    CONFIG_MPC83XX	    MPC83xx family for both MPC8349 and MPC8360
++    CONFIG_MPC8360	    MPC8360 specific
++    CONFIG_MPC8360EMDS	    MPC8360EMDS board specific
++
++4. Compilation
++
++	Assuming you're using BASH shell:
++
++		export CROSS_COMPILE=your-cross-compile-prefix
++		cd u-boot
++		make distclean
++		make MPC8360EMDS_config
++		make
++
++	MPC8360 support PCI in host and slave mode.
++
++	To make u-boot support PCI host 66M :
++	1) DIP SW support PCI mode as described in Section 1.1.
++	2) Make MPC8360EMDS_HOST_66_config
++
++	To make u-boot support PCI host 33M :
++	1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
++	2) Make MPC8360EMDS_HOST_33_config
++
++	To make u-boot support PCI slave 66M :
++	1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
++	2) Make MPC8360EMDS_SLAVE_config
++
++
++5. Downloading and Flashing Images
++
++5.0 Download over serial line using Kermit:
++
++	loadb
++	[Drop to kermit:
++	    ^\c
++	    send <u-boot-bin-image>
++	    c
++	]
++
++
++    Or via tftp:
++
++	tftp 10000 u-boot.bin
++
++5.1 Reflash U-boot Image using U-boot
++
++	tftp 20000 u-boot.bin
++	protect off fef00000 fef3ffff
++	erase fef00000 fef3ffff
++
++	cp.b 20000 fef00000 xxxx
++
++	or
++
++	cp.b 20000 fef00000 3ffff
++
++
++You have to supply the correct byte count with 'xxxx' from the TFTP result log.
++Maybe 3ffff will work too, that corresponds to the erased sectors.
++
++
++6. Notes
++	1) The console baudrate for MPC8360EMDS is 115200bps.
+diff -Naupr u-boot-1.1.6/drivers/cfi_flash.c u-boot-1.1.6-fsl-1/drivers/cfi_flash.c
+--- u-boot-1.1.6/drivers/cfi_flash.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/cfi_flash.c	2006-11-30 12:34:13.000000000 -0600
+@@ -4,11 +4,12 @@
+  *
+  * Copyright (C) 2003 Arabella Software Ltd.
+  * Yuli Barcohen <yuli@arabellasw.com>
+- * Modified to work with AMD flashes
+  *
+  * Copyright (C) 2004
+  * Ed Okerson
+- * Modified to work with little-endian systems.
++ *
++ * Copyright (C) 2006
++ * Tolunay Orkun <listmember@orkun.us>
+  *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+@@ -28,17 +29,6 @@
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+  * MA 02111-1307 USA
+  *
+- * History
+- * 01/20/2004 - combined variants of original driver.
+- * 01/22/2004 - Write performance enhancements for parallel chips (Tolunay)
+- * 01/23/2004 - Support for x8/x16 chips (Rune Raknerud)
+- * 01/27/2004 - Little endian support Ed Okerson
+- *
+- * Tested Architectures
+- * Port Width  Chip Width    # of banks	   Flash Chip  Board
+- * 32	       16	     1		   28F128J3    seranoa/eagle
+- * 64	       16	     1		   28F128J3    seranoa/falcon
+- *
+  */
+ 
+ /* The DEBUG define must be before common to enable debugging */
+@@ -54,21 +44,16 @@
+  * This file implements a Common Flash Interface (CFI) driver for U-Boot.
+  * The width of the port and the width of the chips are determined at initialization.
+  * These widths are used to calculate the address for access CFI data structures.
+- * It has been tested on an Intel Strataflash implementation and AMD 29F016D.
+  *
+  * References
+  * JEDEC Standard JESD68 - Common Flash Interface (CFI)
+  * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
+  * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
+  * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
++ * AMD CFI Specification, Release 2.0 December 1, 2001
++ * AMD/Spansion Application Note: Migration from Single-byte to Three-byte
++ *   Device IDs, Publication Number 25538 Revision A, November 8, 2001
+  *
+- * TODO
+- *
+- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query
+- * Table (ALT) to determine if protection is available
+- *
+- * Add support for other command sets Use the PRI and ALT to determine command set
+- * Verify erase and program timeouts.
+  */
+ 
+ #ifndef CFG_FLASH_BANKS_LIST
+@@ -114,6 +99,10 @@
+ #define AMD_ADDR_START		((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
+ #define AMD_ADDR_ACK		((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA)
+ 
++#define FLASH_OFFSET_MANUFACTURER_ID	0x00
++#define FLASH_OFFSET_DEVICE_ID		0x01
++#define FLASH_OFFSET_DEVICE_ID2		0x0E
++#define FLASH_OFFSET_DEVICE_ID3		0x0F
+ #define FLASH_OFFSET_CFI		0x55
+ #define FLASH_OFFSET_CFI_RESP		0x10
+ #define FLASH_OFFSET_PRIMARY_VENDOR	0x13
+@@ -135,25 +124,20 @@
+ #define FLASH_OFFSET_USER_PROTECTION	0x85
+ #define FLASH_OFFSET_INTEL_PROTECTION	0x81
+ 
+-
+-#define FLASH_MAN_CFI			0x01000000
+-
+-#define CFI_CMDSET_NONE		    0
+-#define CFI_CMDSET_INTEL_EXTENDED   1
+-#define CFI_CMDSET_AMD_STANDARD	    2
+-#define CFI_CMDSET_INTEL_STANDARD   3
+-#define CFI_CMDSET_AMD_EXTENDED	    4
+-#define CFI_CMDSET_MITSU_STANDARD   256
+-#define CFI_CMDSET_MITSU_EXTENDED   257
+-#define CFI_CMDSET_SST		    258
+-
++#define CFI_CMDSET_NONE			0
++#define CFI_CMDSET_INTEL_EXTENDED	1
++#define CFI_CMDSET_AMD_STANDARD		2
++#define CFI_CMDSET_INTEL_STANDARD	3
++#define CFI_CMDSET_AMD_EXTENDED		4
++#define CFI_CMDSET_MITSU_STANDARD	256
++#define CFI_CMDSET_MITSU_EXTENDED	257
++#define CFI_CMDSET_SST			258
+ 
+ #ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
+ # undef  FLASH_CMD_RESET
+-# define FLASH_CMD_RESET                AMD_CMD_RESET /* use AMD-Reset instead */
++# define FLASH_CMD_RESET	AMD_CMD_RESET /* use AMD-Reset instead */
+ #endif
+ 
+-
+ typedef union {
+ 	unsigned char c;
+ 	unsigned short w;
+@@ -168,7 +152,7 @@ typedef union {
+ 	volatile unsigned long long *llp;
+ } cfiptr_t;
+ 
+-#define NUM_ERASE_REGIONS 4
++#define NUM_ERASE_REGIONS	4 /* max. number of erase regions */
+ 
+ /* use CFG_MAX_FLASH_BANKS_DETECT if defined */
+ #ifdef CFG_MAX_FLASH_BANKS_DETECT
+@@ -200,6 +184,7 @@ static void flash_unlock_seq (flash_info
+ static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+ static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+ static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
++static void flash_read_jedec_ids (flash_info_t * info);
+ static int flash_detect_cfi (flash_info_t * info);
+ static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
+ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
+@@ -307,7 +292,7 @@ ushort flash_read_ushort (flash_info_t *
+ }
+ 
+ /*-----------------------------------------------------------------------
+- * read a long word by picking the least significant byte of each maiximum
++ * read a long word by picking the least significant byte of each maximum
+  * port size word. Swap for ppc format.
+  */
+ ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
+@@ -529,14 +514,42 @@ void flash_print_info (flash_info_t * in
+ 		(info->portwidth << 3), (info->chipwidth << 3));
+ 	printf ("  Size: %ld MB in %d Sectors\n",
+ 		info->size >> 20, info->sector_count);
+-	printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
++	printf ("  ");
++	switch (info->vendor) {
++		case CFI_CMDSET_INTEL_STANDARD:
++			printf ("Intel Standard");
++			break;
++		case CFI_CMDSET_INTEL_EXTENDED:
++			printf ("Intel Extended");
++			break;
++		case CFI_CMDSET_AMD_STANDARD:
++			printf ("AMD Standard");
++			break;
++		case CFI_CMDSET_AMD_EXTENDED:
++			printf ("AMD Extended");
++			break;
++		default:
++			printf ("Unknown (%d)", info->vendor);
++			break;
++	}
++	printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X",
++		info->manufacturer_id, info->device_id);
++	if (info->device_id == 0x7E) {
++		printf("%04X", info->device_id2);
++	}
++	printf ("\n  Erase timeout: %ld ms, write timeout: %ld ms\n",
+ 		info->erase_blk_tout,
+-		info->write_tout,
++		info->write_tout);
++	if (info->buffer_size > 1) {
++		printf ("  Buffer write timeout: %ld ms, buffer size: %d bytes\n",
+ 		info->buffer_write_tout,
+ 		info->buffer_size);
++	}
+ 
+-	puts ("  Sector Start Addresses:");
++	puts ("\n  Sector Start Addresses:");
+ 	for (i = 0; i < info->sector_count; ++i) {
++		if ((i % 5) == 0)
++			printf ("\n");
+ #ifdef CFG_FLASH_EMPTY_INFO
+ 		int k;
+ 		int size;
+@@ -560,18 +573,15 @@ void flash_print_info (flash_info_t * in
+ 			}
+ 		}
+ 
+-		if ((i % 5) == 0)
+-			printf ("\n");
+ 		/* print empty and read-only info */
+-		printf (" %08lX%s%s",
++		printf ("  %08lX %c %s ",
+ 			info->start[i],
+-			erased ? " E" : "  ",
+-			info->protect[i] ? "RO " : "   ");
++			erased ? 'E' : ' ',
++			info->protect[i] ? "RO" : "  ");
+ #else	/* ! CFG_FLASH_EMPTY_INFO */
+-		if ((i % 5) == 0)
+-			printf ("\n   ");
+-		printf (" %08lX%s",
+-			info->start[i], info->protect[i] ? " (RO)" : "     ");
++		printf ("  %08lX   %s ",
++			info->start[i],
++			info->protect[i] ? "RO" : "  ");
+ #endif
+ 	}
+ 	putc ('\n');
+@@ -1071,6 +1081,55 @@ static int flash_toggle (flash_info_t * 
+ }
+ 
+ /*-----------------------------------------------------------------------
++ * read jedec ids from device and set corresponding fields in info struct
++ *
++ * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
++ *
++*/
++static void flash_read_jedec_ids (flash_info_t * info)
++{
++	info->manufacturer_id = 0;
++	info->device_id       = 0;
++	info->device_id2      = 0;
++
++	switch (info->vendor) {
++	case CFI_CMDSET_INTEL_STANDARD:
++	case CFI_CMDSET_INTEL_EXTENDED:
++		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
++		flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
++		udelay(1000); /* some flash are slow to respond */
++		info->manufacturer_id = flash_read_uchar (info,
++						FLASH_OFFSET_MANUFACTURER_ID);
++		info->device_id = flash_read_uchar (info,
++						FLASH_OFFSET_DEVICE_ID);
++		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
++		break;
++	case CFI_CMDSET_AMD_STANDARD:
++	case CFI_CMDSET_AMD_EXTENDED:
++		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
++		flash_unlock_seq(info, 0);
++		flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID);
++		udelay(1000); /* some flash are slow to respond */
++		info->manufacturer_id = flash_read_uchar (info,
++						FLASH_OFFSET_MANUFACTURER_ID);
++		info->device_id = flash_read_uchar (info,
++						FLASH_OFFSET_DEVICE_ID);
++		if (info->device_id == 0x7E) {
++			/* AMD 3-byte (expanded) device ids */
++			info->device_id2 = flash_read_uchar (info,
++						FLASH_OFFSET_DEVICE_ID2);
++			info->device_id2 <<= 8;
++			info->device_id2 |= flash_read_uchar (info,
++						FLASH_OFFSET_DEVICE_ID3);
++		}
++		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
++		break;
++	default:
++		break;
++	}
++}
++
++/*-----------------------------------------------------------------------
+  * detect if flash is compatible with the Common Flash Interface (CFI)
+  * http://www.jedec.org/download/search/jesd68.pdf
+  *
+@@ -1120,15 +1179,31 @@ ulong flash_get_size (ulong base, int ba
+ 	uchar num_erase_regions;
+ 	int erase_region_size;
+ 	int erase_region_count;
++	int geometry_reversed = 0;
++
++	info->ext_addr = 0;
++	info->cfi_version = 0;
+ #ifdef CFG_FLASH_PROTECTION
+-	int ext_addr;
+ 	info->legacy_unlock = 0;
+ #endif
+ 
+ 	info->start[0] = base;
+ 
+ 	if (flash_detect_cfi (info)) {
+-		info->vendor = flash_read_ushort (info, 0, FLASH_OFFSET_PRIMARY_VENDOR);
++		info->vendor = flash_read_ushort (info, 0,
++					FLASH_OFFSET_PRIMARY_VENDOR);
++		flash_read_jedec_ids (info);
++		flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
++		num_erase_regions = flash_read_uchar (info,
++					FLASH_OFFSET_NUM_ERASE_REGIONS);
++		info->ext_addr = flash_read_ushort (info, 0,
++					FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
++		if (info->ext_addr) {
++			info->cfi_version = (ushort) flash_read_uchar (info,
++						info->ext_addr + 3) << 8;
++			info->cfi_version |= (ushort) flash_read_uchar (info,
++						info->ext_addr + 4);
++		}
+ #ifdef DEBUG
+ 		flash_printqry (info, 0);
+ #endif
+@@ -1139,26 +1214,46 @@ ulong flash_get_size (ulong base, int ba
+ 			info->cmd_reset = FLASH_CMD_RESET;
+ #ifdef CFG_FLASH_PROTECTION
+ 			/* read legacy lock/unlock bit from intel flash */
+-			ext_addr = flash_read_ushort (info, 0,
+-						      FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
+-			info->legacy_unlock =
+-				flash_read_uchar (info, ext_addr + 5) & 0x08;
++			if (info->ext_addr) {
++				info->legacy_unlock = flash_read_uchar (info,
++						info->ext_addr + 5) & 0x08;
++			}
+ #endif
+ 			break;
+ 		case CFI_CMDSET_AMD_STANDARD:
+ 		case CFI_CMDSET_AMD_EXTENDED:
+ 			info->cmd_reset = AMD_CMD_RESET;
++			/* check if flash geometry needs reversal */
++			if (num_erase_regions <= 1)
++				break;
++			/* reverse geometry if top boot part */
++			if (info->cfi_version < 0x3131) {
++				/* CFI < 1.1, try to guess from device id */
++				if ((info->device_id & 0x80) != 0) {
++					geometry_reversed = 1;
++				}
++				break;
++			}
++			/* CFI >= 1.1, deduct from top/bottom flag */
++			/* note: ext_addr is valid since cfi_version > 0 */
++			if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
++				geometry_reversed = 1;
++			}
+ 			break;
+ 		}
+ 
+ 		debug ("manufacturer is %d\n", info->vendor);
++		debug ("manufacturer id is 0x%x\n", info->manufacturer_id);
++		debug ("device id is 0x%x\n", info->device_id);
++		debug ("device id2 is 0x%x\n", info->device_id2);
++		debug ("cfi version is 0x%04x\n", info->cfi_version);
++
+ 		size_ratio = info->portwidth / info->chipwidth;
+ 		/* if the chip is x8/x16 reduce the ratio by half */
+ 		if ((info->interface == FLASH_CFI_X8X16)
+ 		    && (info->chipwidth == FLASH_CFI_BY8)) {
+ 			size_ratio >>= 1;
+ 		}
+-		num_erase_regions = flash_read_uchar (info, FLASH_OFFSET_NUM_ERASE_REGIONS);
+ 		debug ("size_ratio %d port %d bits chip %d bits\n",
+ 		       size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
+ 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+@@ -1171,7 +1266,12 @@ ulong flash_get_size (ulong base, int ba
+ 					num_erase_regions, NUM_ERASE_REGIONS);
+ 				break;
+ 			}
+-			tmp = flash_read_long (info, 0,
++			if (geometry_reversed)
++				tmp = flash_read_long (info, 0,
++					       FLASH_OFFSET_ERASE_REGIONS +
++					       (num_erase_regions - 1 - i) * 4);
++			else
++				tmp = flash_read_long (info, 0,
+ 					       FLASH_OFFSET_ERASE_REGIONS +
+ 					       i * 4);
+ 			erase_region_size =
+diff -Naupr u-boot-1.1.6/drivers/fsl_i2c.c u-boot-1.1.6-fsl-1/drivers/fsl_i2c.c
+--- u-boot-1.1.6/drivers/fsl_i2c.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/fsl_i2c.c	2006-11-30 12:34:13.000000000 -0600
+@@ -28,29 +28,52 @@
+ #include <asm/fsl_i2c.h>	/* HW definitions */
+ 
+ #define I2C_TIMEOUT	(CFG_HZ / 4)
+-#define I2C		((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET))
+ 
++#define I2C_READ_BIT  1
++#define I2C_WRITE_BIT 0
++
++/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
++ * Default is bus 0.  This is necessary because the DDR initialization
++ * runs from ROM, and we can't switch buses because we can't modify
++ * the global variables.
++ */
++#ifdef CFG_SPD_BUS_NUM
++static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
++#else
++static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
++#endif
++
++static volatile struct fsl_i2c *i2c_dev[2] = {
++	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
++#ifdef CFG_I2C2_OFFSET
++	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
++#endif
++};
+ 
+ void
+ i2c_init(int speed, int slaveadd)
+ {
+-	/* stop I2C controller */
+-	writeb(0x0, &I2C->cr);
+-
+-	/* set clock */
+-	writeb(0x3f, &I2C->fdr);
+-
+-	/* set default filter */
+-	writeb(0x10, &I2C->dfsrr);
++	volatile struct fsl_i2c *dev;
+ 
+-	/* write slave address */
+-	writeb(slaveadd, &I2C->adr);
++	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
+ 
+-	/* clear status register */
+-	writeb(0x0, &I2C->sr);
+-
+-	/* start I2C controller */
+-	writeb(I2C_CR_MEN, &I2C->cr);
++	writeb(0, &dev->cr);			/* stop I2C controller */
++	writeb(0x3F, &dev->fdr);		/* set bus speed */
++	writeb(0x3F, &dev->dfsrr);		/* set default filter */
++	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
++	writeb(0x0, &dev->sr);			/* clear status register */
++	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
++
++#ifdef	CFG_I2C2_OFFSET
++	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
++
++	writeb(0, &dev->cr);			/* stop I2C controller */
++	writeb(0x3F, &dev->fdr);		/* set bus speed */
++	writeb(0x3F, &dev->dfsrr);		/* set default filter */
++	writeb(slaveadd, &dev->adr);		/* write slave address */
++	writeb(0x0, &dev->sr);			/* clear status register */
++	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
++#endif	/* CFG_I2C2_OFFSET */
+ }
+ 
+ static __inline__ int
+@@ -58,7 +81,7 @@ i2c_wait4bus(void)
+ {
+ 	ulong timeval = get_timer(0);
+ 
+-	while (readb(&I2C->sr) & I2C_SR_MBB) {
++	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+ 		if (get_timer(timeval) > I2C_TIMEOUT) {
+ 			return -1;
+ 		}
+@@ -74,11 +97,11 @@ i2c_wait(int write)
+ 	ulong timeval = get_timer(0);
+ 
+ 	do {
+-		csr = readb(&I2C->sr);
++		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+ 		if (!(csr & I2C_SR_MIF))
+ 			continue;
+ 
+-		writeb(0x0, &I2C->sr);
++		writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+ 
+ 		if (csr & I2C_SR_MAL) {
+ 			debug("i2c_wait: MAL\n");
+@@ -90,7 +113,7 @@ i2c_wait(int write)
+ 			return -1;
+ 		}
+ 
+-		if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
++		if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
+ 			debug("i2c_wait: No RXACK\n");
+ 			return -1;
+ 		}
+@@ -107,11 +130,11 @@ i2c_write_addr (u8 dev, u8 dir, int rsta
+ {
+ 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
+ 	       | (rsta ? I2C_CR_RSTA : 0),
+-	       &I2C->cr);
++	       &i2c_dev[i2c_bus_num]->cr);
+ 
+-	writeb((dev << 1) | dir, &I2C->dr);
++	writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+ 
+-	if (i2c_wait(I2C_WRITE) < 0)
++	if (i2c_wait(I2C_WRITE_BIT) < 0)
+ 		return 0;
+ 
+ 	return 1;
+@@ -123,12 +146,12 @@ __i2c_write(u8 *data, int length)
+ 	int i;
+ 
+ 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+-	       &I2C->cr);
++	       &i2c_dev[i2c_bus_num]->cr);
+ 
+ 	for (i = 0; i < length; i++) {
+-		writeb(data[i], &I2C->dr);
++		writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+ 
+-		if (i2c_wait(I2C_WRITE) < 0)
++		if (i2c_wait(I2C_WRITE_BIT) < 0)
+ 			break;
+ 	}
+ 
+@@ -141,25 +164,25 @@ __i2c_read(u8 *data, int length)
+ 	int i;
+ 
+ 	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
+-	       &I2C->cr);
++	       &i2c_dev[i2c_bus_num]->cr);
+ 
+ 	/* dummy read */
+-	readb(&I2C->dr);
++	readb(&i2c_dev[i2c_bus_num]->dr);
+ 
+ 	for (i = 0; i < length; i++) {
+-		if (i2c_wait(I2C_READ) < 0)
++		if (i2c_wait(I2C_READ_BIT) < 0)
+ 			break;
+ 
+ 		/* Generate ack on last next to last byte */
+ 		if (i == length - 2)
+ 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
+-			       &I2C->cr);
++			       &i2c_dev[i2c_bus_num]->cr);
+ 
+ 		/* Generate stop on last byte */
+ 		if (i == length - 1)
+-			writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
++			writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr);
+ 
+-		data[i] = readb(&I2C->dr);
++		data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+ 	}
+ 
+ 	return i;
+@@ -172,13 +195,13 @@ i2c_read(u8 dev, uint addr, int alen, u8
+ 	u8 *a = (u8*)&addr;
+ 
+ 	if (i2c_wait4bus() >= 0
+-	    && i2c_write_addr(dev, I2C_WRITE, 0) != 0
++	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
+ 	    && __i2c_write(&a[4 - alen], alen) == alen
+-	    && i2c_write_addr(dev, I2C_READ, 1) != 0) {
++	    && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) {
+ 		i = __i2c_read(data, length);
+ 	}
+ 
+-	writeb(I2C_CR_MEN, &I2C->cr);
++	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ 
+ 	if (i == length)
+ 	    return 0;
+@@ -193,12 +216,12 @@ i2c_write(u8 dev, uint addr, int alen, u
+ 	u8 *a = (u8*)&addr;
+ 
+ 	if (i2c_wait4bus() >= 0
+-	    && i2c_write_addr(dev, I2C_WRITE, 0) != 0
++	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
+ 	    && __i2c_write(&a[4 - alen], alen) == alen) {
+ 		i = __i2c_write(data, length);
+ 	}
+ 
+-	writeb(I2C_CR_MEN, &I2C->cr);
++	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ 
+ 	if (i == length)
+ 	    return 0;
+@@ -237,5 +260,34 @@ i2c_reg_write(uchar i2c_addr, uchar reg,
+ 	i2c_write(i2c_addr, reg, 1, &val, 1);
+ }
+ 
++int i2c_set_bus_num(unsigned int bus)
++{
++#ifdef CFG_I2C2_OFFSET
++	if (bus > 1) {
++#else
++	if (bus > 0) {
++#endif
++		return -1;
++	}
++
++	i2c_bus_num = bus;
++
++	return 0;
++}
++
++int i2c_set_bus_speed(unsigned int speed)
++{
++	return -1;
++}
++
++unsigned int i2c_get_bus_num(void)
++{
++	return i2c_bus_num;
++}
++
++unsigned int i2c_get_bus_speed(void)
++{
++	return 0;
++}
+ #endif /* CONFIG_HARD_I2C */
+ #endif /* CONFIG_FSL_I2C */
+diff -Naupr u-boot-1.1.6/drivers/nand/nand_base.c u-boot-1.1.6-fsl-1/drivers/nand/nand_base.c
+--- u-boot-1.1.6/drivers/nand/nand_base.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/nand/nand_base.c	2006-12-06 10:33:49.000000000 -0600
+@@ -838,9 +838,9 @@ static int nand_wait(struct mtd_info *mt
+ 	unsigned long	timeo;
+ 
+ 	if (state == FL_ERASING)
+-		timeo = CFG_HZ * 400;
++ 		timeo = (CFG_HZ * 400) / 1000;
+ 	else
+-		timeo = CFG_HZ * 20;
++		timeo = (CFG_HZ * 20) / 1000;
+ 
+ 	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
+ 		this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+@@ -852,8 +852,8 @@ static int nand_wait(struct mtd_info *mt
+ 	while (1) {
+ 		if (get_timer(0) > timeo) {
+ 			printf("Timeout!");
+-			return 0;
+-			}
++			return 0x01;
++		}
+ 
+ 		if (this->dev_ready) {
+ 			if (this->dev_ready(mtd))
+@@ -1713,6 +1713,7 @@ static int nand_write_ecc (struct mtd_in
+ 				goto out;
+ 			}
+ 			*retlen = written;
++			bufstart = (u_char*) &buf[written];
+ 
+ 			ofs = autoplace ? mtd->oobavail : mtd->oobsize;
+ 			if (eccbuf)
+@@ -2407,7 +2408,9 @@ int nand_scan (struct mtd_info *mtd, int
+ 	}
+ 
+ 	if (!nand_flash_ids[i].name) {
++#ifndef CFG_NAND_QUIET_TEST
+ 		printk (KERN_WARNING "No NAND device found!!!\n");
++#endif
+ 		this->select_chip(mtd, -1);
+ 		return 1;
+ 	}
+diff -Naupr u-boot-1.1.6/drivers/qe/Makefile u-boot-1.1.6-fsl-1/drivers/qe/Makefile
+--- u-boot-1.1.6/drivers/qe/Makefile	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/Makefile	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,43 @@
++#
++# Copyright (C) 2006 Freescale Semiconductor, Inc.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB 	:= $(obj)qe.a
++
++COBJS 	:= qe.o uccf.o uec.o uec_phy.o
++
++SRCS 	:= $(COBJS:.o=.c)
++OBJS 	:= $(addprefix $(obj),$(COBJS))
++
++all:	$(LIB)
++
++$(LIB):	$(obj).depend $(OBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS)
++
++#########################################################################
++
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff -Naupr u-boot-1.1.6/drivers/qe/qe.c u-boot-1.1.6-fsl-1/drivers/qe/qe.c
+--- u-boot-1.1.6/drivers/qe/qe.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/qe.c	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,254 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on source code of Shlomi Gridish
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include "common.h"
++#include "asm/errno.h"
++#include "asm/io.h"
++#include "asm/immap_qe.h"
++#include "qe.h"
++
++#if defined(CONFIG_QE)
++qe_map_t		*qe_immr = NULL;
++static qe_snum_t	snums[QE_NUM_OF_SNUM];
++
++void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
++{
++	u32           cecr;
++
++	if (cmd == QE_RESET) {
++		out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG));
++	} else {
++		out_be32(&qe_immr->cp.cecdr, cmd_data);
++		out_be32(&qe_immr->cp.cecr, (sbc | QE_CR_FLG |
++			 ((u32) mcn<<QE_CR_PROTOCOL_SHIFT) | cmd));
++	}
++	/* Wait for the QE_CR_FLG to clear */
++	do {
++		cecr = in_be32(&qe_immr->cp.cecr);
++	} while (cecr & QE_CR_FLG);
++
++	return;
++}
++
++uint qe_muram_alloc(uint size, uint align)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++
++	uint	retloc;
++	uint	align_mask, off;
++	uint	savebase;
++
++	align_mask = align - 1;
++	savebase = gd->mp_alloc_base;
++
++	if ((off = (gd->mp_alloc_base & align_mask)) != 0)
++		gd->mp_alloc_base += (align - off);
++
++	if ((off = size & align_mask) != 0)
++		size += (align - off);
++
++	if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) {
++		gd->mp_alloc_base = savebase;
++		printf("%s: ran out of ram.\n",  __FUNCTION__);
++	}
++
++	retloc = gd->mp_alloc_base;
++	gd->mp_alloc_base += size;
++
++	memset((void *)&qe_immr->muram[retloc], 0, size);
++
++	__asm__ __volatile__("sync");
++
++	return retloc;
++}
++
++void *qe_muram_addr(uint offset)
++{
++	return (void *)&qe_immr->muram[offset];
++}
++
++static void qe_sdma_init(void)
++{
++	volatile sdma_t	*p;
++	uint		sdma_buffer_base;
++
++	p = (volatile sdma_t *)&qe_immr->sdma;
++
++	/* All of DMA transaction in bus 1 */
++	out_be32(&p->sdaqr, 0);
++	out_be32(&p->sdaqmr, 0);
++
++	/* Allocate 2KB temporary buffer for sdma */
++	sdma_buffer_base = qe_muram_alloc(2048, 64);
++	out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK);
++
++	/* Clear sdma status */
++	out_be32(&p->sdsr, 0x03000000);
++
++	/* Enable global mode on bus 1, and 2KB buffer size */
++	out_be32(&p->sdmr, QE_SDMR_GLB_1_MSK | (0x3 << QE_SDMR_CEN_SHIFT));
++}
++
++static u8 thread_snum[QE_NUM_OF_SNUM] = {
++	0x04, 0x05, 0x0c, 0x0d,
++	0x14, 0x15, 0x1c, 0x1d,
++	0x24, 0x25, 0x2c, 0x2d,
++	0x34, 0x35, 0x88, 0x89,
++	0x98, 0x99, 0xa8, 0xa9,
++	0xb8, 0xb9, 0xc8, 0xc9,
++	0xd8, 0xd9, 0xe8, 0xe9
++};
++
++static void qe_snums_init(void)
++{
++	int	i;
++
++	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
++		snums[i].state = QE_SNUM_STATE_FREE;
++		snums[i].num   = thread_snum[i];
++	}
++}
++
++int qe_get_snum(void)
++{
++	int	snum = -EBUSY;
++	int	i;
++
++	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
++		if (snums[i].state == QE_SNUM_STATE_FREE) {
++			snums[i].state = QE_SNUM_STATE_USED;
++			snum = snums[i].num;
++			break;
++		}
++	}
++
++	return snum;
++}
++
++void qe_put_snum(u8 snum)
++{
++	int	i;
++
++	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
++		if (snums[i].num == snum) {
++			snums[i].state = QE_SNUM_STATE_FREE;
++			break;
++		}
++	}
++}
++
++void qe_init(uint qe_base)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++
++	/* Init the QE IMMR base */
++	qe_immr = (qe_map_t *)qe_base;
++
++	gd->mp_alloc_base = QE_DATAONLY_BASE;
++	gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE;
++
++	qe_sdma_init();
++	qe_snums_init();
++}
++
++void qe_reset(void)
++{
++	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
++			 (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
++}
++
++void qe_assign_page(uint snum, uint para_ram_base)
++{
++	u32	cecr;
++
++	out_be32(&qe_immr->cp.cecdr, para_ram_base);
++	out_be32(&qe_immr->cp.cecr, ((u32) snum<<QE_CR_ASSIGN_PAGE_SNUM_SHIFT)
++					 | QE_CR_FLG | QE_ASSIGN_PAGE);
++
++	/* Wait for the QE_CR_FLG to clear */
++	do {
++		cecr = in_be32(&qe_immr->cp.cecr);
++	} while (cecr & QE_CR_FLG );
++
++	return;
++}
++
++/*
++ * brg: 0~15 as BRG1~BRG16
++   rate: baud rate
++ * BRG input clock comes from the BRGCLK (internal clock generated from
++   the QE clock, it is one-half of the QE clock), If need the clock source
++   from CLKn pin, we have te change the function.
++ */
++
++#define BRG_CLK		(gd->brg_clk)
++
++int qe_set_brg(uint brg, uint rate)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++	volatile uint	*bp;
++	u32		divisor;
++	int		div16 = 0;
++
++	if (brg >= QE_NUM_OF_BRGS)
++		return -EINVAL;
++	bp = (uint *)&qe_immr->brg.brgc1;
++	bp += brg;
++
++	divisor = (BRG_CLK / rate);
++	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
++		div16 = 1;
++		divisor /= 16;
++	}
++
++	*bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
++	__asm__ __volatile__("sync");
++
++	if (div16) {
++		*bp |= QE_BRGC_DIV16;
++		__asm__ __volatile__("sync");
++	}
++
++	return 0;
++}
++
++/* Set ethernet MII clock master
++*/
++int qe_set_mii_clk_src(int ucc_num)
++{
++	u32	cmxgcr;
++
++	/* check if the UCC number is in range. */
++	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
++		printf("%s: ucc num not in ranges\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	cmxgcr = in_be32(&qe_immr->qmx.cmxgcr);
++	cmxgcr &= ~QE_CMXGCR_MII_ENET_MNG_MASK;
++	cmxgcr |= (ucc_num <<QE_CMXGCR_MII_ENET_MNG_SHIFT);
++	out_be32(&qe_immr->qmx.cmxgcr, cmxgcr);
++
++	return 0;
++}
++
++#endif /* CONFIG_QE */
+diff -Naupr u-boot-1.1.6/drivers/qe/qe.h u-boot-1.1.6-fsl-1/drivers/qe/qe.h
+--- u-boot-1.1.6/drivers/qe/qe.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/qe.h	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,237 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on source code of Shlomi Gridish
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __QE_H__
++#define __QE_H__
++
++#include "common.h"
++
++#define QE_NUM_OF_SNUM	28
++#define QE_NUM_OF_BRGS	16
++#define UCC_MAX_NUM	8
++
++#define QE_DATAONLY_BASE	(uint)(128)
++#define QE_DATAONLY_SIZE	((uint)(0xc000) - QE_DATAONLY_BASE)
++
++/* QE threads SNUM
++*/
++typedef enum qe_snum_state {
++	QE_SNUM_STATE_USED,   /* used */
++	QE_SNUM_STATE_FREE    /* free */
++} qe_snum_state_e;
++
++typedef struct qe_snum {
++	u8		num;   /* snum  */
++	qe_snum_state_e	state; /* state */
++} qe_snum_t;
++
++/* QE RISC allocation
++*/
++typedef enum qe_risc_allocation {
++	QE_RISC_ALLOCATION_RISC1		= 1,  /* RISC 1 */
++	QE_RISC_ALLOCATION_RISC2		= 2,  /* RISC 2 */
++	QE_RISC_ALLOCATION_RISC1_AND_RISC2	= 3   /* RISC 1 or RISC 2 */
++} qe_risc_allocation_e;
++
++/* QE CECR commands for UCC fast.
++*/
++#define QE_CR_FLG			0x00010000
++#define QE_RESET			0x80000000
++#define QE_INIT_TX_RX			0x00000000
++#define QE_INIT_RX			0x00000001
++#define QE_INIT_TX			0x00000002
++#define QE_ENTER_HUNT_MODE		0x00000003
++#define QE_STOP_TX			0x00000004
++#define QE_GRACEFUL_STOP_TX		0x00000005
++#define QE_RESTART_TX			0x00000006
++#define QE_SWITCH_COMMAND		0x00000007
++#define QE_SET_GROUP_ADDRESS		0x00000008
++#define QE_INSERT_CELL			0x00000009
++#define QE_ATM_TRANSMIT			0x0000000a
++#define QE_CELL_POOL_GET		0x0000000b
++#define QE_CELL_POOL_PUT		0x0000000c
++#define QE_IMA_HOST_CMD			0x0000000d
++#define QE_ATM_MULTI_THREAD_INIT	0x00000011
++#define QE_ASSIGN_PAGE			0x00000012
++#define QE_START_FLOW_CONTROL		0x00000014
++#define QE_STOP_FLOW_CONTROL		0x00000015
++#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
++#define QE_GRACEFUL_STOP_RX		0x0000001a
++#define QE_RESTART_RX			0x0000001b
++
++/* QE CECR Sub Block Code - sub block code of QE command.
++*/
++#define QE_CR_SUBBLOCK_INVALID		0x00000000
++#define QE_CR_SUBBLOCK_USB		0x03200000
++#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
++#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
++#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
++#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
++#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
++#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
++#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
++#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
++#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
++#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
++#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
++#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
++#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
++#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
++#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
++#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
++#define QE_CR_SUBBLOCK_MCC1		0x03800000
++#define QE_CR_SUBBLOCK_MCC2		0x03a00000
++#define QE_CR_SUBBLOCK_MCC3		0x03000000
++#define QE_CR_SUBBLOCK_IDMA1		0x02800000
++#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
++#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
++#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
++#define QE_CR_SUBBLOCK_HPAC		0x01e00000
++#define QE_CR_SUBBLOCK_SPI1		0x01400000
++#define QE_CR_SUBBLOCK_SPI2		0x01600000
++#define QE_CR_SUBBLOCK_RAND		0x01c00000
++#define QE_CR_SUBBLOCK_TIMER		0x01e00000
++#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
++
++/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
++*/
++#define QE_CR_PROTOCOL_UNSPECIFIED	0x00 /* For all other protocols */
++#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
++#define QE_CR_PROTOCOL_ATM_POS		0x0A
++#define QE_CR_PROTOCOL_ETHERNET		0x0C
++#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
++#define QE_CR_PROTOCOL_SHIFT		6
++
++/* QE ASSIGN PAGE command
++*/
++#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT	17
++
++/* Communication Direction.
++*/
++typedef enum comm_dir {
++	COMM_DIR_NONE		= 0,
++	COMM_DIR_RX		= 1,
++	COMM_DIR_TX		= 2,
++	COMM_DIR_RX_AND_TX	= 3
++} comm_dir_e;
++
++/* Clocks and BRG's
++*/
++typedef enum qe_clock {
++	QE_CLK_NONE = 0,
++	QE_BRG1,     /* Baud Rate Generator  1 */
++	QE_BRG2,     /* Baud Rate Generator  2 */
++	QE_BRG3,     /* Baud Rate Generator  3 */
++	QE_BRG4,     /* Baud Rate Generator  4 */
++	QE_BRG5,     /* Baud Rate Generator  5 */
++	QE_BRG6,     /* Baud Rate Generator  6 */
++	QE_BRG7,     /* Baud Rate Generator  7 */
++	QE_BRG8,     /* Baud Rate Generator  8 */
++	QE_BRG9,     /* Baud Rate Generator  9 */
++	QE_BRG10,    /* Baud Rate Generator 10 */
++	QE_BRG11,    /* Baud Rate Generator 11 */
++	QE_BRG12,    /* Baud Rate Generator 12 */
++	QE_BRG13,    /* Baud Rate Generator 13 */
++	QE_BRG14,    /* Baud Rate Generator 14 */
++	QE_BRG15,    /* Baud Rate Generator 15 */
++	QE_BRG16,    /* Baud Rate Generator 16 */
++	QE_CLK1,     /* Clock  1               */
++	QE_CLK2,     /* Clock  2               */
++	QE_CLK3,     /* Clock  3               */
++	QE_CLK4,     /* Clock  4               */
++	QE_CLK5,     /* Clock  5               */
++	QE_CLK6,     /* Clock  6               */
++	QE_CLK7,     /* Clock  7               */
++	QE_CLK8,     /* Clock  8               */
++	QE_CLK9,     /* Clock  9               */
++	QE_CLK10,    /* Clock 10               */
++	QE_CLK11,    /* Clock 11               */
++	QE_CLK12,    /* Clock 12               */
++	QE_CLK13,    /* Clock 13               */
++	QE_CLK14,    /* Clock 14               */
++	QE_CLK15,    /* Clock 15               */
++	QE_CLK16,    /* Clock 16               */
++	QE_CLK17,    /* Clock 17               */
++	QE_CLK18,    /* Clock 18               */
++	QE_CLK19,    /* Clock 19               */
++	QE_CLK20,    /* Clock 20               */
++	QE_CLK21,    /* Clock 21               */
++	QE_CLK22,    /* Clock 22               */
++	QE_CLK23,    /* Clock 23               */
++	QE_CLK24,    /* Clock 24               */
++	QE_CLK_DUMMY
++} qe_clock_e;
++
++/* QE CMXGCR register
++*/
++#define QE_CMXGCR_MII_ENET_MNG_MASK	0x00007000
++#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
++
++/* QE CMXUCR registers
++ */
++#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
++
++/* QE BRG configuration register
++*/
++#define QE_BRGC_ENABLE			0x00010000
++#define QE_BRGC_DIVISOR_SHIFT		1
++#define QE_BRGC_DIVISOR_MAX		0xFFF
++#define QE_BRGC_DIV16			1
++
++/* QE SDMA registers
++*/
++#define QE_SDSR_BER1			0x02000000
++#define QE_SDSR_BER2			0x01000000
++
++#define QE_SDMR_GLB_1_MSK		0x80000000
++#define QE_SDMR_ADR_SEL			0x20000000
++#define QE_SDMR_BER1_MSK		0x02000000
++#define QE_SDMR_BER2_MSK		0x01000000
++#define QE_SDMR_EB1_MSK			0x00800000
++#define QE_SDMR_ER1_MSK			0x00080000
++#define QE_SDMR_ER2_MSK			0x00040000
++#define QE_SDMR_CEN_MASK		0x0000E000
++#define QE_SDMR_SBER_1			0x00000200
++#define QE_SDMR_SBER_2			0x00000200
++#define QE_SDMR_EB1_PR_MASK		0x000000C0
++#define QE_SDMR_ER1_PR			0x00000008
++
++#define QE_SDMR_CEN_SHIFT		13
++#define QE_SDMR_EB1_PR_SHIFT		6
++
++#define QE_SDTM_MSNUM_SHIFT		24
++
++#define QE_SDEBCR_BA_MASK		0x01FFFFFF
++
++void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
++void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
++uint qe_muram_alloc(uint size, uint align);
++void *qe_muram_addr(uint offset);
++int qe_get_snum(void);
++void qe_put_snum(u8 snum);
++void qe_init(uint qe_base);
++void qe_reset(void);
++void qe_assign_page(uint snum, uint para_ram_base);
++int qe_set_brg(uint brg, uint rate);
++int qe_set_mii_clk_src(int ucc_num);
++
++#endif /* __QE_H__ */
+diff -Naupr u-boot-1.1.6/drivers/qe/uccf.c u-boot-1.1.6-fsl-1/drivers/qe/uccf.c
+--- u-boot-1.1.6/drivers/qe/uccf.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/uccf.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,404 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on source code of Shlomi Gridish
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include "common.h"
++#include "malloc.h"
++#include "asm/errno.h"
++#include "asm/io.h"
++#include "asm/immap_qe.h"
++#include "qe.h"
++#include "uccf.h"
++
++#if defined(CONFIG_QE)
++void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
++{
++	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
++}
++
++u32 ucc_fast_get_qe_cr_subblock(int ucc_num)
++{
++	switch (ucc_num) {
++		case 0:	return QE_CR_SUBBLOCK_UCCFAST1;
++		case 1:	return QE_CR_SUBBLOCK_UCCFAST2;
++		case 2:	return QE_CR_SUBBLOCK_UCCFAST3;
++		case 3:	return QE_CR_SUBBLOCK_UCCFAST4;
++		case 4:	return QE_CR_SUBBLOCK_UCCFAST5;
++		case 5:	return QE_CR_SUBBLOCK_UCCFAST6;
++		case 6:	return QE_CR_SUBBLOCK_UCCFAST7;
++		case 7:	return QE_CR_SUBBLOCK_UCCFAST8;
++		default:	return QE_CR_SUBBLOCK_INVALID;
++	}
++}
++
++static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr,
++				 u8 *reg_num, u8 *shift)
++{
++	switch (ucc_num) {
++		case 0:	/* UCC1 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr1);
++			*reg_num = 1;
++			*shift  = 16;
++			break;
++		case 2:	/* UCC3 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr1);
++			*reg_num = 1;
++			*shift  = 0;
++			break;
++		case 4:	/* UCC5 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr2);
++			*reg_num = 2;
++			*shift  = 16;
++			break;
++		case 6:	/* UCC7 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr2);
++			*reg_num = 2;
++			*shift  = 0;
++			break;
++		case 1:	/* UCC2 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr3);
++			*reg_num = 3;
++			*shift  = 16;
++			break;
++		case 3:	/* UCC4 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr3);
++			*reg_num = 3;
++			*shift  = 0;
++			break;
++		case 5:	/* UCC6 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr4);
++			*reg_num = 4;
++			*shift  = 16;
++			break;
++		case 7:	/* UCC8 */
++			*p_cmxucr  = &(qe_immr->qmx.cmxucr4);
++			*reg_num = 4;
++			*shift  = 0;
++			break;
++		default:
++			break;
++	}
++}
++
++static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode)
++{
++	volatile u32	*p_cmxucr = NULL;
++	u8		reg_num = 0;
++	u8		shift = 0;
++	u32		clockBits;
++	u32		clockMask;
++	int		source = -1;
++
++	/* check if the UCC number is in range. */
++	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
++		return -EINVAL;
++
++	if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
++		printf("%s: bad comm mode type passed\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
++
++	switch (reg_num) {
++		case 1:
++			switch (clock) {
++				case QE_BRG1:	source = 1; break;
++				case QE_BRG2:	source = 2; break;
++				case QE_BRG7:	source = 3; break;
++				case QE_BRG8:	source = 4; break;
++				case QE_CLK9:	source = 5; break;
++				case QE_CLK10:	source = 6; break;
++				case QE_CLK11:	source = 7; break;
++				case QE_CLK12:	source = 8; break;
++				case QE_CLK15:	source = 9; break;
++				case QE_CLK16:	source = 10; break;
++				default:	source = -1; break;
++			}
++			break;
++		case 2:
++			switch (clock) {
++				case QE_BRG5:	source = 1; break;
++				case QE_BRG6:	source = 2; break;
++				case QE_BRG7:	source = 3; break;
++				case QE_BRG8:	source = 4; break;
++				case QE_CLK13:	source = 5; break;
++				case QE_CLK14:	source = 6; break;
++				case QE_CLK19:	source = 7; break;
++				case QE_CLK20:	source = 8; break;
++				case QE_CLK15:	source = 9; break;
++				case QE_CLK16:	source = 10; break;
++				default:	source = -1; break;
++			}
++			break;
++		case 3:
++			switch (clock) {
++				case QE_BRG9:	source = 1; break;
++				case QE_BRG10:	source = 2; break;
++				case QE_BRG15:	source = 3; break;
++				case QE_BRG16:	source = 4; break;
++				case QE_CLK3:	source = 5; break;
++				case QE_CLK4:	source = 6; break;
++				case QE_CLK17:	source = 7; break;
++				case QE_CLK18:	source = 8; break;
++				case QE_CLK7:	source = 9; break;
++				case QE_CLK8:	source = 10; break;
++				case QE_CLK16:	source = 11; break;
++				default:	source = -1; break;
++			}
++			break;
++		case 4:
++			switch (clock) {
++				case QE_BRG13:	source = 1; break;
++				case QE_BRG14:	source = 2; break;
++				case QE_BRG15:	source = 3; break;
++				case QE_BRG16:	source = 4; break;
++				case QE_CLK5:	source = 5; break;
++				case QE_CLK6:	source = 6; break;
++				case QE_CLK21:	source = 7; break;
++				case QE_CLK22:	source = 8; break;
++				case QE_CLK7:	source = 9; break;
++				case QE_CLK8:	source = 10; break;
++				case QE_CLK16:	source = 11; break;
++				default:	source = -1; break;
++			}
++			break;
++		default:
++			source = -1;
++			break;
++	}
++
++	if (source == -1) {
++		printf("%s: Bad combination of clock and UCC\n", __FUNCTION__);
++		return -ENOENT;
++	}
++
++	clockBits = (u32) source;
++	clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
++	if (mode == COMM_DIR_RX) {
++		clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
++		clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
++	}
++	clockBits <<= shift;
++	clockMask <<= shift;
++
++	out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
++
++	return 0;
++}
++
++static uint ucc_get_reg_baseaddr(int ucc_num)
++{
++	uint base = 0;
++
++	/* check if the UCC number is in range */
++	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
++		printf("%s: the UCC num not in ranges\n", __FUNCTION__);
++		return 0;
++	}
++
++	switch (ucc_num) {
++		case 0:	base = 0x00002000; break;
++		case 1:	base = 0x00003000; break;
++		case 2:	base = 0x00002200; break;
++		case 3:	base = 0x00003200; break;
++		case 4:	base = 0x00002400; break;
++		case 5:	base = 0x00003400; break;
++		case 6:	base = 0x00002600; break;
++		case 7:	base = 0x00003600; break;
++		default: break;
++	}
++
++	base = (uint)qe_immr + base;
++	return base;
++}
++
++void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode)
++{
++	ucc_fast_t	*uf_regs;
++	u32		gumr;
++
++	uf_regs = uccf->uf_regs;
++
++	/* Enable reception and/or transmission on this UCC. */
++	gumr = in_be32(&uf_regs->gumr);
++	if (mode & COMM_DIR_TX) {
++		gumr |= UCC_FAST_GUMR_ENT;
++		uccf->enabled_tx = 1;
++	}
++	if (mode & COMM_DIR_RX) {
++		gumr |= UCC_FAST_GUMR_ENR;
++		uccf->enabled_rx = 1;
++	}
++	out_be32(&uf_regs->gumr, gumr);
++}
++
++void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode)
++{
++	ucc_fast_t	*uf_regs;
++	u32		gumr;
++
++	uf_regs = uccf->uf_regs;
++
++	/* Disable reception and/or transmission on this UCC. */
++	gumr = in_be32(&uf_regs->gumr);
++	if (mode & COMM_DIR_TX) {
++		gumr &= ~UCC_FAST_GUMR_ENT;
++		uccf->enabled_tx = 0;
++	}
++	if (mode & COMM_DIR_RX) {
++		gumr &= ~UCC_FAST_GUMR_ENR;
++		uccf->enabled_rx = 0;
++	}
++	out_be32(&uf_regs->gumr, gumr);
++}
++
++int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t  **uccf_ret)
++{
++	ucc_fast_private_t	*uccf;
++	ucc_fast_t		*uf_regs;
++
++	if (!uf_info)
++		return -EINVAL;
++
++	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
++		printf("%s: Illagal UCC number!\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t));
++	if (!uccf) {
++		printf("%s: No memory for UCC fast data structure!\n",
++			 __FUNCTION__);
++		return -ENOMEM;
++	}
++	memset(uccf, 0, sizeof(ucc_fast_private_t));
++
++	/* Save fast UCC structure */
++	uccf->uf_info	= uf_info;
++	uccf->uf_regs	= (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num);
++
++	if (uccf->uf_regs == NULL) {
++		printf("%s: No memory map for UCC fast controller!\n",
++			 __FUNCTION__);
++		return -ENOMEM;
++	}
++
++	uccf->enabled_tx	= 0;
++	uccf->enabled_rx	= 0;
++
++	uf_regs			= uccf->uf_regs;
++	uccf->p_ucce		= (u32 *) &(uf_regs->ucce);
++	uccf->p_uccm		= (u32 *) &(uf_regs->uccm);
++
++	/* Init GUEMR register, UCC both Rx and Tx is Fast protocol */
++	out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX
++				 | UCC_GUEMR_MODE_FAST_TX);
++
++	/* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */
++	out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH);
++
++	/* Set the Giga ethernet VFIFO stuff */
++	if (uf_info->eth_type == GIGA_ETH) {
++		/* Allocate memory for Tx Virtual Fifo */
++		uccf->ucc_fast_tx_virtual_fifo_base_offset =
++		qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT,
++				 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
++
++		/* Allocate memory for Rx Virtual Fifo */
++		uccf->ucc_fast_rx_virtual_fifo_base_offset =
++		qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT +
++				 UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
++				UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
++
++		/* utfb, urfb are offsets from MURAM base */
++		out_be32(&uf_regs->utfb,
++			 uccf->ucc_fast_tx_virtual_fifo_base_offset);
++		out_be32(&uf_regs->urfb,
++			 uccf->ucc_fast_rx_virtual_fifo_base_offset);
++
++		/* Set Virtual Fifo registers */
++		out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT);
++		out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT);
++		out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT);
++		out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT);
++		out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT);
++		out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT);
++	}
++
++	/* Set the Fast ethernet VFIFO stuff */
++	if (uf_info->eth_type == FAST_ETH) {
++		/* Allocate memory for Tx Virtual Fifo */
++		uccf->ucc_fast_tx_virtual_fifo_base_offset =
++		qe_muram_alloc(UCC_GETH_UTFS_INIT,
++				 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
++
++		/* Allocate memory for Rx Virtual Fifo */
++		uccf->ucc_fast_rx_virtual_fifo_base_offset =
++		qe_muram_alloc(UCC_GETH_URFS_INIT +
++				 UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
++				UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
++
++		/* utfb, urfb are offsets from MURAM base */
++		out_be32(&uf_regs->utfb,
++			 uccf->ucc_fast_tx_virtual_fifo_base_offset);
++		out_be32(&uf_regs->urfb,
++			 uccf->ucc_fast_rx_virtual_fifo_base_offset);
++
++		/* Set Virtual Fifo registers */
++		out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT);
++		out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT);
++		out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT);
++		out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT);
++		out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT);
++ 		out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT);
++	}
++
++	/* Rx clock routing */
++	if (uf_info->rx_clock != QE_CLK_NONE) {
++		if (ucc_set_clk_src(uf_info->ucc_num,
++			 uf_info->rx_clock, COMM_DIR_RX)) {
++			printf("%s: Illegal value for parameter 'RxClock'.\n",
++				 __FUNCTION__);
++			return -EINVAL;
++		}
++	}
++
++	/* Tx clock routing */
++	if (uf_info->tx_clock != QE_CLK_NONE) {
++		if (ucc_set_clk_src(uf_info->ucc_num,
++			 uf_info->tx_clock, COMM_DIR_TX)) {
++			printf("%s: Illegal value for parameter 'TxClock'.\n",
++				 __FUNCTION__);
++			return -EINVAL;
++		}
++	}
++
++	/* Clear interrupt mask register to disable all of interrupts */
++	out_be32(&uf_regs->uccm, 0x0);
++
++	/* Writing '1' to clear all of envents */
++	out_be32(&uf_regs->ucce, 0xffffffff);
++
++	*uccf_ret = uccf;
++	return 0;
++}
++#endif /* CONFIG_QE */
+diff -Naupr u-boot-1.1.6/drivers/qe/uccf.h u-boot-1.1.6-fsl-1/drivers/qe/uccf.h
+--- u-boot-1.1.6/drivers/qe/uccf.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/uccf.h	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,130 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on source code of Shlomi Gridish
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __UCCF_H__
++#define __UCCF_H__
++
++#include "common.h"
++#include "qe.h"
++
++/* Fast or Giga ethernet
++*/
++typedef enum enet_type {
++	FAST_ETH,
++	GIGA_ETH,
++} enet_type_e;
++
++/* General UCC Extended Mode Register
++*/
++#define UCC_GUEMR_MODE_MASK_RX		0x02
++#define UCC_GUEMR_MODE_MASK_TX		0x01
++#define UCC_GUEMR_MODE_FAST_RX		0x02
++#define UCC_GUEMR_MODE_FAST_TX		0x01
++#define UCC_GUEMR_MODE_SLOW_RX		0x00
++#define UCC_GUEMR_MODE_SLOW_TX		0x00
++#define UCC_GUEMR_SET_RESERVED3		0x10 /* Bit 3 must be set 1 */
++
++/* General UCC FAST Mode Register
++*/
++#define UCC_FAST_GUMR_TCI		0x20000000
++#define UCC_FAST_GUMR_TRX		0x10000000
++#define UCC_FAST_GUMR_TTX		0x08000000
++#define UCC_FAST_GUMR_CDP		0x04000000
++#define UCC_FAST_GUMR_CTSP		0x02000000
++#define UCC_FAST_GUMR_CDS		0x01000000
++#define UCC_FAST_GUMR_CTSS		0x00800000
++#define UCC_FAST_GUMR_TXSY		0x00020000
++#define UCC_FAST_GUMR_RSYN		0x00010000
++#define UCC_FAST_GUMR_RTSM		0x00002000
++#define UCC_FAST_GUMR_REVD		0x00000400
++#define UCC_FAST_GUMR_ENR		0x00000020
++#define UCC_FAST_GUMR_ENT		0x00000010
++
++/* GUMR [MODE] bit maps
++*/
++#define UCC_FAST_GUMR_HDLC		0x00000000
++#define UCC_FAST_GUMR_QMC		0x00000002
++#define UCC_FAST_GUMR_UART		0x00000004
++#define UCC_FAST_GUMR_BISYNC		0x00000008
++#define UCC_FAST_GUMR_ATM		0x0000000a
++#define UCC_FAST_GUMR_ETH		0x0000000c
++
++/* Transmit On Demand (UTORD)
++*/
++#define UCC_SLOW_TOD			0x8000
++#define UCC_FAST_TOD			0x8000
++
++/* Fast Ethernet (10/100 Mbps)
++*/
++#define UCC_GETH_URFS_INIT		512        /* Rx virtual FIFO size */
++#define UCC_GETH_URFET_INIT		256        /* 1/2 urfs */
++#define UCC_GETH_URFSET_INIT		384        /* 3/4 urfs */
++#define UCC_GETH_UTFS_INIT		512        /* Tx virtual FIFO size */
++#define UCC_GETH_UTFET_INIT		256        /* 1/2 utfs */
++#define UCC_GETH_UTFTT_INIT		128
++
++/* Gigabit Ethernet (1000 Mbps)
++*/
++#define UCC_GETH_URFS_GIGA_INIT		4096/*2048*/    /* Rx virtual FIFO size */
++#define UCC_GETH_URFET_GIGA_INIT	2048/*1024*/    /* 1/2 urfs */
++#define UCC_GETH_URFSET_GIGA_INIT	3072/*1536*/    /* 3/4 urfs */
++#define UCC_GETH_UTFS_GIGA_INIT		8192/*2048*/    /* Tx virtual FIFO size */
++#define UCC_GETH_UTFET_GIGA_INIT	4096/*1024*/    /* 1/2 utfs */
++#define UCC_GETH_UTFTT_GIGA_INIT	0x400/*0x40*/   /*  */
++
++/* UCC fast alignment
++*/
++#define UCC_FAST_RX_ALIGN			4
++#define UCC_FAST_MRBLR_ALIGNMENT		4
++#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
++
++/* Sizes
++*/
++#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD	8
++
++/* UCC fast structure.
++*/
++typedef struct ucc_fast_info {
++	int		ucc_num;
++	qe_clock_e	rx_clock;
++	qe_clock_e	tx_clock;
++	enet_type_e	eth_type;
++} ucc_fast_info_t;
++
++typedef struct ucc_fast_private {
++	ucc_fast_info_t	*uf_info;
++	ucc_fast_t	*uf_regs; /* a pointer to memory map of UCC regs */
++	u32		*p_ucce; /* a pointer to the event register */
++	u32		*p_uccm; /* a pointer to the mask register */
++	int		enabled_tx; /* whether UCC is enabled for Tx (ENT) */
++	int		enabled_rx; /* whether UCC is enabled for Rx (ENR) */
++	u32		ucc_fast_tx_virtual_fifo_base_offset;
++	u32		ucc_fast_rx_virtual_fifo_base_offset;
++} ucc_fast_private_t;
++
++void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf);
++u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
++void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode);
++void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode);
++int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret);
++
++#endif /* __UCCF_H__ */
+diff -Naupr u-boot-1.1.6/drivers/qe/uec.c u-boot-1.1.6-fsl-1/drivers/qe/uec.c
+--- u-boot-1.1.6/drivers/qe/uec.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/uec.c	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,1266 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include "common.h"
++#include "net.h"
++#include "malloc.h"
++#include "asm/errno.h"
++#include "asm/io.h"
++#include "asm/immap_qe.h"
++#include "qe.h"
++#include "uccf.h"
++#include "uec.h"
++#include "uec_phy.h"
++
++#if defined(CONFIG_QE)
++
++#ifdef CONFIG_UEC_ETH1
++static uec_info_t eth1_uec_info = {
++	.uf_info		= {
++		.ucc_num	= CFG_UEC1_UCC_NUM,
++		.rx_clock	= CFG_UEC1_RX_CLK,
++		.tx_clock	= CFG_UEC1_TX_CLK,
++		.eth_type	= CFG_UEC1_ETH_TYPE,
++	},
++	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
++	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
++	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
++	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
++	.tx_bd_ring_len		= 16,
++	.rx_bd_ring_len		= 16,
++	.phy_address		= CFG_UEC1_PHY_ADDR,
++	.enet_interface		= CFG_UEC1_INTERFACE_MODE,
++};
++#endif
++#ifdef CONFIG_UEC_ETH2
++static uec_info_t eth2_uec_info = {
++	.uf_info		= {
++		.ucc_num	= CFG_UEC2_UCC_NUM,
++		.rx_clock	= CFG_UEC2_RX_CLK,
++		.tx_clock	= CFG_UEC2_TX_CLK,
++		.eth_type	= CFG_UEC2_ETH_TYPE,
++	},
++	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
++	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
++	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
++	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
++	.tx_bd_ring_len		= 16,
++	.rx_bd_ring_len		= 16,
++	.phy_address		= CFG_UEC2_PHY_ADDR,
++	.enet_interface		= CFG_UEC2_INTERFACE_MODE,
++};
++#endif
++
++static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
++{
++	uec_t		*uec_regs;
++	u32		maccfg1;
++
++	if (!uec) {
++		printf("%s: uec not initial\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	uec_regs = uec->uec_regs;
++
++	maccfg1 = in_be32(&uec_regs->maccfg1);
++
++	if (mode & COMM_DIR_TX)	{
++		maccfg1 |= MACCFG1_ENABLE_TX;
++		out_be32(&uec_regs->maccfg1, maccfg1);
++		uec->mac_tx_enabled = 1;
++	}
++
++	if (mode & COMM_DIR_RX)	{
++		maccfg1 |= MACCFG1_ENABLE_RX;
++		out_be32(&uec_regs->maccfg1, maccfg1);
++		uec->mac_rx_enabled = 1;
++	}
++
++	return 0;
++}
++
++static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
++{
++	uec_t		*uec_regs;
++	u32		maccfg1;
++
++	if (!uec) {
++		printf("%s: uec not initial\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	uec_regs = uec->uec_regs;
++
++	maccfg1 = in_be32(&uec_regs->maccfg1);
++
++	if (mode & COMM_DIR_TX)	{
++		maccfg1 &= ~MACCFG1_ENABLE_TX;
++		out_be32(&uec_regs->maccfg1, maccfg1);
++		uec->mac_tx_enabled = 0;
++	}
++
++	if (mode & COMM_DIR_RX)	{
++		maccfg1 &= ~MACCFG1_ENABLE_RX;
++		out_be32(&uec_regs->maccfg1, maccfg1);
++		uec->mac_rx_enabled = 0;
++	}
++
++	return 0;
++}
++
++static int uec_graceful_stop_tx(uec_private_t *uec)
++{
++	ucc_fast_t		*uf_regs;
++	u32			cecr_subblock;
++	u32			ucce;
++
++	if (!uec || !uec->uccf) {
++		printf("%s: No handle passed.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	uf_regs = uec->uccf->uf_regs;
++
++	/* Clear the grace stop event */
++	out_be32(&uf_regs->ucce, UCCE_GRA);
++
++	/* Issue host command */
++	cecr_subblock =
++		 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
++	qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
++			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
++
++	/* Wait for command to complete */
++	do {
++		ucce = in_be32(&uf_regs->ucce);
++	} while (! (ucce & UCCE_GRA));
++
++	uec->grace_stopped_tx = 1;
++
++	return 0;
++}
++
++static int uec_graceful_stop_rx(uec_private_t *uec)
++{
++	u32		cecr_subblock;
++	u8		ack;
++
++	if (!uec) {
++		printf("%s: No handle passed.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	if (!uec->p_rx_glbl_pram) {
++		printf("%s: No init rx global parameter\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* Clear acknowledge bit */
++	ack = uec->p_rx_glbl_pram->rxgstpack;
++	ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
++	uec->p_rx_glbl_pram->rxgstpack = ack;
++
++	/* Keep issuing cmd and checking ack bit until it is asserted */
++	do {
++		/* Issue host command */
++		cecr_subblock =
++		 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
++		qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
++				 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
++		ack = uec->p_rx_glbl_pram->rxgstpack;
++	} while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
++
++	uec->grace_stopped_rx = 1;
++
++	return 0;
++}
++
++static int uec_restart_tx(uec_private_t *uec)
++{
++	u32		cecr_subblock;
++
++	if (!uec || !uec->uec_info) {
++		printf("%s: No handle passed.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	cecr_subblock =
++	 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
++	qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
++			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
++
++	uec->grace_stopped_tx = 0;
++
++	return 0;
++}
++
++static int uec_restart_rx(uec_private_t *uec)
++{
++	u32		cecr_subblock;
++
++	if (!uec || !uec->uec_info) {
++		printf("%s: No handle passed.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	cecr_subblock =
++	 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
++	qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
++			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
++
++	uec->grace_stopped_rx = 0;
++
++	return 0;
++}
++
++static int uec_open(uec_private_t *uec, comm_dir_e mode)
++{
++	ucc_fast_private_t	*uccf;
++
++	if (!uec || !uec->uccf) {
++		printf("%s: No handle passed.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	uccf = uec->uccf;
++
++	/* check if the UCC number is in range. */
++	if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
++		printf("%s: ucc_num out of range.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* Enable MAC */
++	uec_mac_enable(uec, mode);
++
++	/* Enable UCC fast */
++	ucc_fast_enable(uccf, mode);
++
++	/* RISC microcode start */
++	if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
++		uec_restart_tx(uec);
++	}
++	if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
++		uec_restart_rx(uec);
++	}
++
++	return 0;
++}
++
++static int uec_stop(uec_private_t *uec, comm_dir_e mode)
++{
++	ucc_fast_private_t	*uccf;
++
++	if (!uec || !uec->uccf) {
++		printf("%s: No handle passed.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	uccf = uec->uccf;
++
++	/* check if the UCC number is in range. */
++	if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
++		printf("%s: ucc_num out of range.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	/* Stop any transmissions */
++	if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
++		uec_graceful_stop_tx(uec);
++	}
++	/* Stop any receptions */
++	if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
++		uec_graceful_stop_rx(uec);
++	}
++
++	/* Disable the UCC fast */
++	ucc_fast_disable(uec->uccf, mode);
++
++	/* Disable the MAC */
++	uec_mac_disable(uec, mode);
++
++	return 0;
++}
++
++static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
++{
++	uec_t		*uec_regs;
++	u32		maccfg2;
++
++	if (!uec) {
++		printf("%s: uec not initial\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	uec_regs = uec->uec_regs;
++
++	if (duplex == DUPLEX_HALF) {
++		maccfg2 = in_be32(&uec_regs->maccfg2);
++		maccfg2 &= ~MACCFG2_FDX;
++		out_be32(&uec_regs->maccfg2, maccfg2);
++	}
++
++	if (duplex == DUPLEX_FULL) {
++		maccfg2 = in_be32(&uec_regs->maccfg2);
++		maccfg2 |= MACCFG2_FDX;
++		out_be32(&uec_regs->maccfg2, maccfg2);
++	}
++
++	return 0;
++}
++
++static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
++{
++	enet_interface_e	enet_if_mode;
++	uec_info_t 		*uec_info;
++	uec_t			*uec_regs;
++	u32			upsmr;
++	u32			maccfg2;
++
++	if (!uec) {
++		printf("%s: uec not initial\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	uec_info = uec->uec_info;
++	uec_regs = uec->uec_regs;
++	enet_if_mode = if_mode;
++
++	maccfg2 = in_be32(&uec_regs->maccfg2);
++	maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
++
++	upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
++	upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
++
++	switch (enet_if_mode) {
++		case ENET_100_MII:
++		case ENET_10_MII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
++			break;
++		case ENET_1000_GMII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
++			break;
++		case ENET_1000_TBI:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
++			upsmr |= UPSMR_TBIM;
++			break;
++		case ENET_1000_RTBI:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
++			upsmr |= (UPSMR_RPM | UPSMR_TBIM);
++			break;
++		case ENET_1000_RGMII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
++			upsmr |= UPSMR_RPM;
++			break;
++		case ENET_100_RGMII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
++			upsmr |= UPSMR_RPM;
++			break;
++		case ENET_10_RGMII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
++			upsmr |= (UPSMR_RPM | UPSMR_R10M);
++			break;
++		case ENET_100_RMII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
++			upsmr |= UPSMR_RMM;
++			break;
++		case ENET_10_RMII:
++			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
++			upsmr |= (UPSMR_R10M | UPSMR_RMM);
++			break;
++		default:
++			return -EINVAL;
++			break;
++	}
++	out_be32(&uec_regs->maccfg2, maccfg2);
++	out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
++
++	return 0;
++}
++
++static int init_mii_management_configuration(uec_t *uec_regs)
++{
++	uint		timeout = 0x1000;
++	u32		miimcfg = 0;
++
++	miimcfg = in_be32(&uec_regs->miimcfg);
++	miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
++	out_be32(&uec_regs->miimcfg, miimcfg);
++
++	/* Wait until the bus is free */
++	while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
++	if (timeout <= 0) {
++		printf("%s: The MII Bus is stuck!", __FUNCTION__);
++		return -ETIMEDOUT;
++	}
++
++	return 0;
++}
++
++static int init_phy(struct eth_device *dev)
++{
++	uec_private_t		*uec;
++	uec_t			*uec_regs;
++	struct uec_mii_info	*mii_info;
++	struct phy_info		*curphy;
++	int			err;
++
++	uec = (uec_private_t *)dev->priv;
++	uec_regs = uec->uec_regs;
++
++	uec->oldlink = 0;
++	uec->oldspeed = 0;
++	uec->oldduplex = -1;
++
++	mii_info = malloc(sizeof(*mii_info));
++	if (!mii_info) {
++		printf("%s: Could not allocate mii_info", dev->name);
++		return -ENOMEM;
++	}
++	memset(mii_info, 0, sizeof(*mii_info));
++
++	mii_info->speed = SPEED_1000;
++	mii_info->duplex = DUPLEX_FULL;
++	mii_info->pause = 0;
++	mii_info->link = 1;
++
++	mii_info->advertising = (ADVERTISED_10baseT_Half |
++				ADVERTISED_10baseT_Full |
++				ADVERTISED_100baseT_Half |
++				ADVERTISED_100baseT_Full |
++				ADVERTISED_1000baseT_Full);
++	mii_info->autoneg = 1;
++	mii_info->mii_id = uec->uec_info->phy_address;
++	mii_info->dev = dev;
++
++	mii_info->mdio_read = &read_phy_reg;
++	mii_info->mdio_write = &write_phy_reg;
++
++	uec->mii_info = mii_info;
++
++	if (init_mii_management_configuration(uec_regs)) {
++		printf("%s: The MII Bus is stuck!", dev->name);
++		err = -1;
++		goto bus_fail;
++	}
++
++	/* get info for this PHY */
++	curphy = get_phy_info(uec->mii_info);
++	if (!curphy) {
++		printf("%s: No PHY found", dev->name);
++		err = -1;
++		goto no_phy;
++	}
++
++	mii_info->phyinfo = curphy;
++
++	/* Run the commands which initialize the PHY */
++	if (curphy->init) {
++		err = curphy->init(uec->mii_info);
++		if (err)
++			goto phy_init_fail;
++	}
++
++	return 0;
++
++phy_init_fail:
++no_phy:
++bus_fail:
++	free(mii_info);
++	return err;
++}
++
++static void adjust_link(struct eth_device *dev)
++{
++	uec_private_t		*uec = (uec_private_t *)dev->priv;
++	uec_t			*uec_regs;
++	struct uec_mii_info	*mii_info = uec->mii_info;
++
++	extern void change_phy_interface_mode(struct eth_device *dev,
++					 enet_interface_e mode);
++	uec_regs = uec->uec_regs;
++
++	if (mii_info->link) {
++		/* Now we make sure that we can be in full duplex mode.
++		* If not, we operate in half-duplex mode. */
++		if (mii_info->duplex != uec->oldduplex) {
++			if (!(mii_info->duplex)) {
++				uec_set_mac_duplex(uec, DUPLEX_HALF);
++				printf("%s: Half Duplex\n", dev->name);
++			} else {
++				uec_set_mac_duplex(uec, DUPLEX_FULL);
++				printf("%s: Full Duplex\n", dev->name);
++			}
++			uec->oldduplex = mii_info->duplex;
++		}
++
++		if (mii_info->speed != uec->oldspeed) {
++			switch (mii_info->speed) {
++				case 1000:
++					break;
++				case 100:
++					printf ("switching to rgmii 100\n");
++					/* change phy to rgmii 100 */
++					change_phy_interface_mode(dev,
++								ENET_100_RGMII);
++					/* change the MAC interface mode */
++					uec_set_mac_if_mode(uec,ENET_100_RGMII);
++					break;
++				case 10:
++					printf ("switching to rgmii 10\n");
++					/* change phy to rgmii 10 */
++					change_phy_interface_mode(dev,
++								ENET_10_RGMII);
++					/* change the MAC interface mode */
++					uec_set_mac_if_mode(uec,ENET_10_RGMII);
++					break;
++				default:
++					printf("%s: Ack,Speed(%d)is illegal\n",
++						dev->name, mii_info->speed);
++					break;
++			}
++
++			printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
++			uec->oldspeed = mii_info->speed;
++		}
++
++		if (!uec->oldlink) {
++			printf("%s: Link is up\n", dev->name);
++			uec->oldlink = 1;
++		}
++
++	} else { /* if (mii_info->link) */
++		if (uec->oldlink) {
++			printf("%s: Link is down\n", dev->name);
++			uec->oldlink = 0;
++			uec->oldspeed = 0;
++			uec->oldduplex = -1;
++		}
++	}
++}
++
++static void phy_change(struct eth_device *dev)
++{
++	uec_private_t	*uec = (uec_private_t *)dev->priv;
++	uec_t		*uec_regs;
++	int		result = 0;
++
++	uec_regs = uec->uec_regs;
++
++	/* Delay 5s to give the PHY a chance to change the register state */
++	udelay(5000000);
++
++	/* Update the link, speed, duplex */
++	result = uec->mii_info->phyinfo->read_status(uec->mii_info);
++
++	/* Adjust the interface according to speed */
++	if ((0 == result) || (uec->mii_info->link == 0)) {
++		adjust_link(dev);
++	}
++}
++
++static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
++{
++	uec_t		*uec_regs;
++	u32		mac_addr1;
++	u32		mac_addr2;
++
++	if (!uec) {
++		printf("%s: uec not initial\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	uec_regs = uec->uec_regs;
++
++	/* if a station address of 0x12345678ABCD, perform a write to
++	MACSTNADDR1 of 0xCDAB7856,
++	MACSTNADDR2 of 0x34120000 */
++
++	mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
++			(mac_addr[3] << 8)  | (mac_addr[2]);
++	out_be32(&uec_regs->macstnaddr1, mac_addr1);
++
++	mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
++	out_be32(&uec_regs->macstnaddr2, mac_addr2);
++
++	return 0;
++}
++
++static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
++					 int *threads_num_ret)
++{
++	int	num_threads_numerica;
++
++	switch (threads_num) {
++		case UEC_NUM_OF_THREADS_1:
++			num_threads_numerica = 1;
++			break;
++		case UEC_NUM_OF_THREADS_2:
++			num_threads_numerica = 2;
++			break;
++		case UEC_NUM_OF_THREADS_4:
++			num_threads_numerica = 4;
++			break;
++		case UEC_NUM_OF_THREADS_6:
++			num_threads_numerica = 6;
++			break;
++		case UEC_NUM_OF_THREADS_8:
++			num_threads_numerica = 8;
++			break;
++		default:
++			printf("%s: Bad number of threads value.",
++				 __FUNCTION__);
++			return -EINVAL;
++	}
++
++	*threads_num_ret = num_threads_numerica;
++
++	return 0;
++}
++
++static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
++{
++	uec_info_t	*uec_info;
++	u32		end_bd;
++	u8		bmrx = 0;
++	int		i;
++
++	uec_info = uec->uec_info;
++
++	/* Alloc global Tx parameter RAM page */
++	uec->tx_glbl_pram_offset = qe_muram_alloc(
++				sizeof(uec_tx_global_pram_t),
++				 UEC_TX_GLOBAL_PRAM_ALIGNMENT);
++	uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
++				qe_muram_addr(uec->tx_glbl_pram_offset);
++
++	/* Zero the global Tx prameter RAM */
++	memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
++
++	/* Init global Tx parameter RAM */
++
++	/* TEMODER, RMON statistics disable, one Tx queue */
++	out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
++
++	/* SQPTR */
++	uec->send_q_mem_reg_offset = qe_muram_alloc(
++				sizeof(uec_send_queue_qd_t),
++				 UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
++	uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
++				qe_muram_addr(uec->send_q_mem_reg_offset);
++	out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
++
++	/* Setup the table with TxBDs ring */
++	end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
++					 * SIZEOFBD;
++	out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
++				 (u32)(uec->p_tx_bd_ring));
++	out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
++						 end_bd);
++
++	/* Scheduler Base Pointer, we have only one Tx queue, no need it */
++	out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
++
++	/* TxRMON Base Pointer, TxRMON disable, we don't need it */
++	out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
++
++	/* TSTATE, global snooping, big endian, the CSB bus selected */
++	bmrx = BMR_INIT_VALUE;
++	out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
++
++	/* IPH_Offset */
++	for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
++		out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
++	}
++
++	/* VTAG table */
++	for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
++		out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
++	}
++
++	/* TQPTR */
++	uec->thread_dat_tx_offset = qe_muram_alloc(
++		num_threads_tx * sizeof(uec_thread_data_tx_t) +
++		 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
++
++	uec->p_thread_data_tx = (uec_thread_data_tx_t *)
++				qe_muram_addr(uec->thread_dat_tx_offset);
++	out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
++}
++
++static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
++{
++	u8	bmrx = 0;
++	int	i;
++	uec_82xx_address_filtering_pram_t	*p_af_pram;
++
++	/* Allocate global Rx parameter RAM page */
++	uec->rx_glbl_pram_offset = qe_muram_alloc(
++		sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
++	uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
++				qe_muram_addr(uec->rx_glbl_pram_offset);
++
++	/* Zero Global Rx parameter RAM */
++	memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
++
++	/* Init global Rx parameter RAM */
++	/* REMODER, Extended feature mode disable, VLAN disable,
++	 LossLess flow control disable, Receive firmware statisic disable,
++	 Extended address parsing mode disable, One Rx queues,
++	 Dynamic maximum/minimum frame length disable, IP checksum check
++	 disable, IP address alignment disable
++	*/
++	out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
++
++	/* RQPTR */
++	uec->thread_dat_rx_offset = qe_muram_alloc(
++			num_threads_rx * sizeof(uec_thread_data_rx_t),
++			 UEC_THREAD_DATA_ALIGNMENT);
++	uec->p_thread_data_rx = (uec_thread_data_rx_t *)
++				qe_muram_addr(uec->thread_dat_rx_offset);
++	out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
++
++	/* Type_or_Len */
++	out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
++
++	/* RxRMON base pointer, we don't need it */
++	out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
++
++	/* IntCoalescingPTR, we don't need it, no interrupt */
++	out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
++
++	/* RSTATE, global snooping, big endian, the CSB bus selected */
++	bmrx = BMR_INIT_VALUE;
++	out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
++
++	/* MRBLR */
++	out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
++
++	/* RBDQPTR */
++	uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
++				sizeof(uec_rx_bd_queues_entry_t) + \
++				sizeof(uec_rx_prefetched_bds_t),
++				 UEC_RX_BD_QUEUES_ALIGNMENT);
++	uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
++				qe_muram_addr(uec->rx_bd_qs_tbl_offset);
++
++	/* Zero it */
++	memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
++					sizeof(uec_rx_prefetched_bds_t));
++	out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
++	out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
++		 (u32)uec->p_rx_bd_ring);
++
++	/* MFLR */
++	out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
++	/* MINFLR */
++	out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
++	/* MAXD1 */
++	out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
++	/* MAXD2 */
++	out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
++	/* ECAM_PTR */
++	out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
++	/* L2QT */
++	out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
++	/* L3QT */
++	for (i = 0; i < 8; i++)	{
++		out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
++	}
++
++	/* VLAN_TYPE */
++	out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
++	/* TCI */
++	out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
++
++	/* Clear PQ2 style address filtering hash table */
++	p_af_pram = (uec_82xx_address_filtering_pram_t *) \
++			uec->p_rx_glbl_pram->addressfiltering;
++
++	p_af_pram->iaddr_h = 0;
++	p_af_pram->iaddr_l = 0;
++	p_af_pram->gaddr_h = 0;
++	p_af_pram->gaddr_l = 0;
++}
++
++static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
++					 int thread_tx, int thread_rx)
++{
++	uec_init_cmd_pram_t		*p_init_enet_param;
++	u32				init_enet_param_offset;
++	uec_info_t			*uec_info;
++	int				i;
++	int				snum;
++	u32				init_enet_offset;
++	u32				entry_val;
++	u32				command;
++	u32				cecr_subblock;
++
++	uec_info = uec->uec_info;
++
++	/* Allocate init enet command parameter */
++	uec->init_enet_param_offset = qe_muram_alloc(
++					sizeof(uec_init_cmd_pram_t), 4);
++	init_enet_param_offset = uec->init_enet_param_offset;
++	uec->p_init_enet_param = (uec_init_cmd_pram_t *)
++				qe_muram_addr(uec->init_enet_param_offset);
++
++	/* Zero init enet command struct */
++	memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
++
++	/* Init the command struct */
++	p_init_enet_param = uec->p_init_enet_param;
++	p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
++	p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
++	p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
++	p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
++	p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
++	p_init_enet_param->largestexternallookupkeysize = 0;
++
++	p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
++					 << ENET_INIT_PARAM_RGF_SHIFT;
++	p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
++					 << ENET_INIT_PARAM_TGF_SHIFT;
++
++	/* Init Rx global parameter pointer */
++	p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
++						 (u32)uec_info->riscRx;
++
++	/* Init Rx threads */
++	for (i = 0; i < (thread_rx + 1); i++) {
++		if ((snum = qe_get_snum()) < 0) {
++			printf("%s can not get snum\n", __FUNCTION__);
++			return -ENOMEM;
++		}
++
++		if (i==0) {
++			init_enet_offset = 0;
++		} else {
++			init_enet_offset = qe_muram_alloc(
++					sizeof(uec_thread_rx_pram_t),
++					 UEC_THREAD_RX_PRAM_ALIGNMENT);
++		}
++
++		entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
++				 init_enet_offset | (u32)uec_info->riscRx;
++		p_init_enet_param->rxthread[i] = entry_val;
++	}
++
++	/* Init Tx global parameter pointer */
++	p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
++					 (u32)uec_info->riscTx;
++
++	/* Init Tx threads */
++	for (i = 0; i < thread_tx; i++) {
++		if ((snum = qe_get_snum()) < 0)	{
++			printf("%s can not get snum\n", __FUNCTION__);
++			return -ENOMEM;
++		}
++
++		init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
++						 UEC_THREAD_TX_PRAM_ALIGNMENT);
++
++		entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
++				 init_enet_offset | (u32)uec_info->riscTx;
++		p_init_enet_param->txthread[i] = entry_val;
++	}
++
++	__asm__ __volatile__("sync");
++
++	/* Issue QE command */
++	command = QE_INIT_TX_RX;
++	cecr_subblock =	ucc_fast_get_qe_cr_subblock(
++				uec->uec_info->uf_info.ucc_num);
++	qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
++						 init_enet_param_offset);
++
++	return 0;
++}
++
++static int uec_startup(uec_private_t *uec)
++{
++	uec_info_t			*uec_info;
++	ucc_fast_info_t			*uf_info;
++	ucc_fast_private_t		*uccf;
++	ucc_fast_t			*uf_regs;
++	uec_t				*uec_regs;
++	int				num_threads_tx;
++	int				num_threads_rx;
++	u32				utbipar;
++	enet_interface_e		enet_interface;
++	u32				length;
++	u32				align;
++	qe_bd_t				*bd;
++	u8				*buf;
++	int				i;
++
++	if (!uec || !uec->uec_info) {
++		printf("%s: uec or uec_info not initial\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	uec_info = uec->uec_info;
++	uf_info = &(uec_info->uf_info);
++
++	/* Check if Rx BD ring len is illegal */
++	if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
++		(uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
++		printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
++			 __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* Check if Tx BD ring len is illegal */
++	if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
++		printf("%s: Tx BD ring length must not be smaller than 2.\n",
++			 __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* Check if MRBLR is illegal */
++	if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN  % UEC_MRBLR_ALIGNMENT)) {
++		printf("%s: max rx buffer length must be mutliple of 128.\n",
++			 __FUNCTION__);
++		return -EINVAL;
++	}
++
++	/* Both Rx and Tx are stopped */
++	uec->grace_stopped_rx = 1;
++	uec->grace_stopped_tx = 1;
++
++	/* Init UCC fast */
++	if (ucc_fast_init(uf_info, &uccf)) {
++		printf("%s: failed to init ucc fast\n", __FUNCTION__);
++		return -ENOMEM;
++	}
++
++	/* Save uccf */
++	uec->uccf = uccf;
++
++	/* Convert the Tx threads number */
++	if (uec_convert_threads_num(uec_info->num_threads_tx,
++					 &num_threads_tx)) {
++		return -EINVAL;
++	}
++
++	/* Convert the Rx threads number */
++	if (uec_convert_threads_num(uec_info->num_threads_rx,
++					 &num_threads_rx)) {
++		return -EINVAL;
++	}
++
++	uf_regs = uccf->uf_regs;
++
++	/* UEC register is following UCC fast registers */
++	uec_regs = (uec_t *)(&uf_regs->ucc_eth);
++
++	/* Save the UEC register pointer to UEC private struct */
++	uec->uec_regs = uec_regs;
++
++	/* Init UPSMR, enable hardware statistics (UCC) */
++	out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
++
++	/* Init MACCFG1, flow control disable, disable Tx and Rx */
++	out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
++
++	/* Init MACCFG2, length check, MAC PAD and CRC enable */
++	out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
++
++	/* Setup MAC interface mode */
++	uec_set_mac_if_mode(uec, uec_info->enet_interface);
++
++	/* Setup MII master clock source */
++	qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
++
++	/* Setup UTBIPAR */
++	utbipar = in_be32(&uec_regs->utbipar);
++	utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
++	enet_interface = uec->uec_info->enet_interface;
++	if (enet_interface == ENET_1000_TBI ||
++		 enet_interface == ENET_1000_RTBI) {
++		utbipar |=  (uec_info->phy_address + uec_info->uf_info.ucc_num)
++						 << UTBIPAR_PHY_ADDRESS_SHIFT;
++	} else {
++		utbipar |=  (0x10 + uec_info->uf_info.ucc_num)
++						 << UTBIPAR_PHY_ADDRESS_SHIFT;
++	}
++
++	out_be32(&uec_regs->utbipar, utbipar);
++
++	/* Allocate Tx BDs */
++	length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
++		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
++		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
++	if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
++		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) {
++		length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
++	}
++
++	align = UEC_TX_BD_RING_ALIGNMENT;
++	uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
++	if (uec->tx_bd_ring_offset != 0) {
++		uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
++						 & ~(align - 1));
++	}
++
++	/* Zero all of Tx BDs */
++	memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
++
++	/* Allocate Rx BDs */
++	length = uec_info->rx_bd_ring_len * SIZEOFBD;
++	align = UEC_RX_BD_RING_ALIGNMENT;
++	uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
++	if (uec->rx_bd_ring_offset != 0) {
++		uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
++							 & ~(align - 1));
++	}
++
++	/* Zero all of Rx BDs */
++	memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
++
++	/* Allocate Rx buffer */
++	length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
++	align = UEC_RX_DATA_BUF_ALIGNMENT;
++	uec->rx_buf_offset = (u32)malloc(length + align);
++	if (uec->rx_buf_offset != 0) {
++		uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
++						 & ~(align - 1));
++	}
++
++	/* Zero all of the Rx buffer */
++	memset((void *)(uec->rx_buf_offset), 0, length + align);
++
++	/* Init TxBD ring */
++	bd = (qe_bd_t *)uec->p_tx_bd_ring;
++	uec->txBd = bd;
++
++	for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
++		BD_DATA_CLEAR(bd);
++		BD_STATUS_SET(bd, 0);
++		BD_LENGTH_SET(bd, 0);
++		bd ++;
++	}
++	BD_STATUS_SET((--bd), TxBD_WRAP);
++
++	/* Init RxBD ring */
++	bd = (qe_bd_t *)uec->p_rx_bd_ring;
++	uec->rxBd = bd;
++	buf = uec->p_rx_buf;
++	for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
++		BD_DATA_SET(bd, buf);
++		BD_LENGTH_SET(bd, 0);
++		BD_STATUS_SET(bd, RxBD_EMPTY);
++		buf += MAX_RXBUF_LEN;
++		bd ++;
++	}
++	BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
++
++	/* Init global Tx parameter RAM */
++	uec_init_tx_parameter(uec, num_threads_tx);
++
++	/* Init global Rx parameter RAM */
++	uec_init_rx_parameter(uec, num_threads_rx);
++
++	/* Init ethernet Tx and Rx parameter command */
++	if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
++					 num_threads_rx)) {
++		printf("%s issue init enet cmd failed\n", __FUNCTION__);
++		return -ENOMEM;
++	}
++
++	return 0;
++}
++
++static int uec_init(struct eth_device* dev, bd_t *bd)
++{
++	uec_private_t		*uec;
++	int			err;
++
++	uec = (uec_private_t *)dev->priv;
++
++	if (uec->the_first_run == 0) {
++		/* Set up the MAC address */
++		if (dev->enetaddr[0] & 0x01) {
++			printf("%s: MacAddress is multcast address\n",
++				 __FUNCTION__);
++			return -EINVAL;
++		}
++		uec_set_mac_address(uec, dev->enetaddr);
++		uec->the_first_run = 1;
++	}
++
++	err = uec_open(uec, COMM_DIR_RX_AND_TX);
++	if (err) {
++		printf("%s: cannot enable UEC device\n", dev->name);
++		return err;
++	}
++
++	return 0;
++}
++
++static void uec_halt(struct eth_device* dev)
++{
++	uec_private_t	*uec = (uec_private_t *)dev->priv;
++	uec_stop(uec, COMM_DIR_RX_AND_TX);
++}
++
++static int uec_send(struct eth_device* dev, volatile void *buf, int len)
++{
++	uec_private_t		*uec;
++	ucc_fast_private_t	*uccf;
++	volatile qe_bd_t	*bd;
++	volatile u16		status;
++	int			i;
++	int			result = 0;
++
++	uec = (uec_private_t *)dev->priv;
++	uccf = uec->uccf;
++	bd = uec->txBd;
++
++	/* Find an empty TxBD */
++	for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) {
++		if (i > 0x100000) {
++			printf("%s: tx buffer not ready\n", dev->name);
++			return result;
++		}
++	}
++
++	/* Init TxBD */
++	BD_DATA_SET(bd, buf);
++	BD_LENGTH_SET(bd, len);
++	status = BD_STATUS(bd);
++	status &= BD_WRAP;
++	status |= (TxBD_READY | TxBD_LAST);
++	BD_STATUS_SET(bd, status);
++
++	/* Tell UCC to transmit the buffer */
++	ucc_fast_transmit_on_demand(uccf);
++
++	/* Wait for buffer to be transmitted */
++	status = BD_STATUS(bd);
++	for (i = 0; status & TxBD_READY; i++) {
++		if (i > 0x100000) {
++			printf("%s: tx error\n", dev->name);
++			return result;
++		}
++		status = BD_STATUS(bd);
++	}
++
++	/* Ok, the buffer be transimitted */
++	BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
++	uec->txBd = bd;
++	result = 1;
++
++	return result;
++}
++
++static int uec_recv(struct eth_device* dev)
++{
++	uec_private_t		*uec = dev->priv;
++	volatile qe_bd_t	*bd;
++	volatile u16		status;
++	u16			len;
++	u8			*data;
++
++	bd = uec->rxBd;
++	status = BD_STATUS(bd);
++
++	while (!(status & RxBD_EMPTY)) {
++		if (!(status & RxBD_ERROR)) {
++			data = BD_DATA(bd);
++			len = BD_LENGTH(bd);
++			NetReceive(data, len);
++		} else {
++			printf("%s: Rx error\n", dev->name);
++		}
++		status &= BD_CLEAN;
++		BD_LENGTH_SET(bd, 0);
++		BD_STATUS_SET(bd, status | RxBD_EMPTY);
++		BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
++		status = BD_STATUS(bd);
++	}
++	uec->rxBd = bd;
++
++	return 1;
++}
++
++int uec_initialize(int index)
++{
++	struct eth_device	*dev;
++	int			i;
++	uec_private_t		*uec;
++	uec_info_t		*uec_info;
++	int			err;
++
++	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
++	if (!dev)
++		return 0;
++	memset(dev, 0, sizeof(struct eth_device));
++
++	/* Allocate the UEC private struct */
++	uec = (uec_private_t *)malloc(sizeof(uec_private_t));
++	if (!uec) {
++		return -ENOMEM;
++	}
++	memset(uec, 0, sizeof(uec_private_t));
++
++	/* Init UEC private struct, they come from board.h */
++	if (index == 0) {
++#ifdef CONFIG_UEC_ETH1
++		uec_info = &eth1_uec_info;
++#endif
++	} else if (index == 1) {
++#ifdef CONFIG_UEC_ETH2
++		uec_info = &eth2_uec_info;
++#endif
++	} else {
++		printf("%s: index is illegal.\n", __FUNCTION__);
++		return -EINVAL;
++	}
++
++	uec->uec_info = uec_info;
++
++	sprintf(dev->name, "FSL UEC%d", index);
++	dev->iobase = 0;
++	dev->priv = (void *)uec;
++	dev->init = uec_init;
++	dev->halt = uec_halt;
++	dev->send = uec_send;
++	dev->recv = uec_recv;
++
++	/* Clear the ethnet address */
++	for (i = 0; i < 6; i++)
++		dev->enetaddr[i] = 0;
++
++	eth_register(dev);
++
++	err = uec_startup(uec);
++	if (err) {
++		printf("%s: Cannot configure net device, aborting.",dev->name);
++		return err;
++	}
++
++	err = init_phy(dev);
++	if (err) {
++		printf("%s: Cannot initialize PHY, aborting.\n", dev->name);
++		return err;
++	}
++
++	phy_change(dev);
++
++	return 1;
++}
++#endif /* CONFIG_QE */
+diff -Naupr u-boot-1.1.6/drivers/qe/uec.h u-boot-1.1.6-fsl-1/drivers/qe/uec.h
+--- u-boot-1.1.6/drivers/qe/uec.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/uec.h	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,716 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ * based on source code of Shlomi Gridish
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __UEC_H__
++#define __UEC_H__
++
++#define MAX_TX_THREADS				8
++#define MAX_RX_THREADS				8
++#define MAX_TX_QUEUES				8
++#define MAX_RX_QUEUES				8
++#define MAX_PREFETCHED_BDS			4
++#define MAX_IPH_OFFSET_ENTRY			8
++#define MAX_ENET_INIT_PARAM_ENTRIES_RX		9
++#define MAX_ENET_INIT_PARAM_ENTRIES_TX		8
++
++/* UEC UPSMR (Protocol Specific Mode Register)
++ */
++#define UPSMR_ECM	0x04000000 /* Enable CAM Miss               */
++#define UPSMR_HSE	0x02000000 /* Hardware Statistics Enable    */
++#define UPSMR_PRO	0x00400000 /* Promiscuous                   */
++#define UPSMR_CAP	0x00200000 /* CAM polarity                  */
++#define UPSMR_RSH	0x00100000 /* Receive Short Frames          */
++#define UPSMR_RPM	0x00080000 /* Reduced Pin Mode interfaces   */
++#define UPSMR_R10M	0x00040000 /* RGMII/RMII 10 Mode            */
++#define UPSMR_RLPB	0x00020000 /* RMII Loopback Mode            */
++#define UPSMR_TBIM	0x00010000 /* Ten-bit Interface Mode        */
++#define UPSMR_RMM	0x00001000 /* RMII/RGMII Mode               */
++#define UPSMR_CAM	0x00000400 /* CAM Address Matching          */
++#define UPSMR_BRO	0x00000200 /* Broadcast Address             */
++#define UPSMR_RES1	0x00002000 /* Reserved feild - must be 1    */
++
++#define UPSMR_INIT_VALUE	(UPSMR_HSE | UPSMR_RES1)
++
++/* UEC MACCFG1 (MAC Configuration 1 Register)
++ */
++#define MACCFG1_FLOW_RX			0x00000020 /* Flow Control Rx */
++#define MACCFG1_FLOW_TX			0x00000010 /* Flow Control Tx */
++#define MACCFG1_ENABLE_SYNCHED_RX	0x00000008 /* Enable Rx Sync  */
++#define MACCFG1_ENABLE_RX		0x00000004 /* Enable Rx       */
++#define MACCFG1_ENABLE_SYNCHED_TX	0x00000002 /* Enable Tx Sync  */
++#define MACCFG1_ENABLE_TX		0x00000001 /* Enable Tx       */
++
++#define MACCFG1_INIT_VALUE		(0)
++
++/* UEC MACCFG2 (MAC Configuration 2 Register)
++ */
++#define MACCFG2_PREL				0x00007000
++#define MACCFG2_PREL_SHIFT			(31 - 19)
++#define MACCFG2_PREL_MASK			0x0000f000
++#define MACCFG2_SRP				0x00000080
++#define MACCFG2_STP				0x00000040
++#define MACCFG2_RESERVED_1			0x00000020 /* must be set  */
++#define MACCFG2_LC				0x00000010 /* Length Check */
++#define MACCFG2_MPE				0x00000008
++#define MACCFG2_FDX				0x00000001 /* Full Duplex  */
++#define MACCFG2_FDX_MASK			0x00000001
++#define MACCFG2_PAD_CRC				0x00000004
++#define MACCFG2_CRC_EN				0x00000002
++#define MACCFG2_PAD_AND_CRC_MODE_NONE		0x00000000
++#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY	0x00000002
++#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC	0x00000004
++#define MACCFG2_INTERFACE_MODE_NIBBLE		0x00000100
++#define MACCFG2_INTERFACE_MODE_BYTE		0x00000200
++#define MACCFG2_INTERFACE_MODE_MASK		0x00000300
++
++#define MACCFG2_INIT_VALUE	(MACCFG2_PREL | MACCFG2_RESERVED_1 | \
++				 MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX)
++
++/* UEC Event Register
++*/
++#define UCCE_MPD				0x80000000
++#define UCCE_SCAR				0x40000000
++#define UCCE_GRA				0x20000000
++#define UCCE_CBPR				0x10000000
++#define UCCE_BSY				0x08000000
++#define UCCE_RXC				0x04000000
++#define UCCE_TXC				0x02000000
++#define UCCE_TXE				0x01000000
++#define UCCE_TXB7				0x00800000
++#define UCCE_TXB6				0x00400000
++#define UCCE_TXB5				0x00200000
++#define UCCE_TXB4				0x00100000
++#define UCCE_TXB3				0x00080000
++#define UCCE_TXB2				0x00040000
++#define UCCE_TXB1				0x00020000
++#define UCCE_TXB0				0x00010000
++#define UCCE_RXB7				0x00008000
++#define UCCE_RXB6				0x00004000
++#define UCCE_RXB5				0x00002000
++#define UCCE_RXB4				0x00001000
++#define UCCE_RXB3				0x00000800
++#define UCCE_RXB2				0x00000400
++#define UCCE_RXB1				0x00000200
++#define UCCE_RXB0				0x00000100
++#define UCCE_RXF7				0x00000080
++#define UCCE_RXF6				0x00000040
++#define UCCE_RXF5				0x00000020
++#define UCCE_RXF4				0x00000010
++#define UCCE_RXF3				0x00000008
++#define UCCE_RXF2				0x00000004
++#define UCCE_RXF1				0x00000002
++#define UCCE_RXF0				0x00000001
++
++#define UCCE_TXB	(UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 | \
++			 UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0)
++#define UCCE_RXB	(UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 | \
++			 UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0)
++#define UCCE_RXF	(UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 | \
++			 UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0)
++#define UCCE_OTHER	(UCCE_SCAR | UCCE_GRA  | UCCE_CBPR | UCCE_BSY  | \
++			 UCCE_RXC  | UCCE_TXC  | UCCE_TXE)
++
++/* UEC TEMODR Register
++*/
++#define TEMODER_SCHEDULER_ENABLE		0x2000
++#define TEMODER_IP_CHECKSUM_GENERATE		0x0400
++#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1	0x0200
++#define TEMODER_RMON_STATISTICS			0x0100
++#define TEMODER_NUM_OF_QUEUES_SHIFT		(15-15)
++
++#define TEMODER_INIT_VALUE			0xc000
++
++/* UEC REMODR Register
++*/
++#define REMODER_RX_RMON_STATISTICS_ENABLE	0x00001000
++#define REMODER_RX_EXTENDED_FEATURES		0x80000000
++#define REMODER_VLAN_OPERATION_TAGGED_SHIFT	(31-9 )
++#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT	(31-10)
++#define REMODER_RX_QOS_MODE_SHIFT		(31-15)
++#define REMODER_RMON_STATISTICS			0x00001000
++#define REMODER_RX_EXTENDED_FILTERING		0x00000800
++#define REMODER_NUM_OF_QUEUES_SHIFT		(31-23)
++#define REMODER_DYNAMIC_MAX_FRAME_LENGTH	0x00000008
++#define REMODER_DYNAMIC_MIN_FRAME_LENGTH	0x00000004
++#define REMODER_IP_CHECKSUM_CHECK		0x00000002
++#define REMODER_IP_ADDRESS_ALIGNMENT		0x00000001
++
++#define REMODER_INIT_VALUE			0
++
++/* BMRx - Bus Mode Register */
++#define BMR_GLB					0x20
++#define BMR_BO_BE				0x10
++#define BMR_DTB_SECONDARY_BUS			0x02
++#define BMR_BDB_SECONDARY_BUS			0x01
++
++#define BMR_SHIFT				24
++#define BMR_INIT_VALUE				(BMR_GLB | BMR_BO_BE)
++
++/* UEC UCCS (Ethernet Status Register)
++ */
++#define UCCS_BPR				0x02
++#define UCCS_PAU				0x02
++#define UCCS_MPD				0x01
++
++/* UEC MIIMCFG (MII Management Configuration Register)
++ */
++#define MIIMCFG_RESET_MANAGEMENT		0x80000000
++#define MIIMCFG_NO_PREAMBLE			0x00000010
++#define MIIMCFG_CLOCK_DIVIDE_SHIFT		(31 - 31)
++#define MIIMCFG_CLOCK_DIVIDE_MASK		0x0000000f
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4	0x00000001
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6	0x00000002
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8	0x00000003
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10	0x00000004
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14	0x00000005
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20	0x00000006
++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28	0x00000007
++
++#define MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE	\
++	MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10
++
++/* UEC MIIMCOM (MII Management Command Register)
++ */
++#define MIIMCOM_SCAN_CYCLE			0x00000002 /* Scan cycle */
++#define MIIMCOM_READ_CYCLE			0x00000001 /* Read cycle */
++
++/* UEC MIIMADD (MII Management Address Register)
++ */
++#define MIIMADD_PHY_ADDRESS_SHIFT		(31 - 23)
++#define MIIMADD_PHY_REGISTER_SHIFT		(31 - 31)
++
++/* UEC MIIMCON (MII Management Control Register)
++ */
++#define MIIMCON_PHY_CONTROL_SHIFT		(31 - 31)
++#define MIIMCON_PHY_STATUS_SHIFT		(31 - 31)
++
++/* UEC MIIMIND (MII Management Indicator Register)
++ */
++#define MIIMIND_NOT_VALID			0x00000004
++#define MIIMIND_SCAN				0x00000002
++#define MIIMIND_BUSY				0x00000001
++
++/* UEC UTBIPAR (Ten Bit Interface Physical Address Register)
++ */
++#define UTBIPAR_PHY_ADDRESS_SHIFT		(31 - 31)
++#define UTBIPAR_PHY_ADDRESS_MASK		0x0000001f
++
++/* UEC UESCR (Ethernet Statistics Control Register)
++ */
++#define UESCR_AUTOZ				0x8000
++#define UESCR_CLRCNT				0x4000
++#define UESCR_MAXCOV_SHIFT			(15 -  7)
++#define UESCR_SCOV_SHIFT			(15 - 15)
++
++/****** Tx data struct collection ******/
++/* Tx thread data, each Tx thread has one this struct.
++*/
++typedef struct uec_thread_data_tx {
++	u8   res0[136];
++} __attribute__ ((packed)) uec_thread_data_tx_t;
++
++/* Tx thread parameter, each Tx thread has one this struct.
++*/
++typedef struct uec_thread_tx_pram {
++	u8   res0[64];
++} __attribute__ ((packed)) uec_thread_tx_pram_t;
++
++/* Send queue queue-descriptor, each Tx queue has one this QD
++*/
++typedef struct uec_send_queue_qd {
++	u32    bd_ring_base; /* pointer to BD ring base address */
++	u8     res0[0x8];
++	u32    last_bd_completed_address; /* last entry in BD ring */
++	u8     res1[0x30];
++} __attribute__ ((packed)) uec_send_queue_qd_t;
++
++/* Send queue memory region */
++typedef struct uec_send_queue_mem_region {
++	uec_send_queue_qd_t   sqqd[MAX_TX_QUEUES];
++} __attribute__ ((packed)) uec_send_queue_mem_region_t;
++
++/* Scheduler struct
++*/
++typedef struct uec_scheduler {
++	u16  cpucount0;        /* CPU packet counter */
++	u16  cpucount1;        /* CPU packet counter */
++	u16  cecount0;         /* QE  packet counter */
++	u16  cecount1;         /* QE  packet counter */
++	u16  cpucount2;        /* CPU packet counter */
++	u16  cpucount3;        /* CPU packet counter */
++	u16  cecount2;         /* QE  packet counter */
++	u16  cecount3;         /* QE  packet counter */
++	u16  cpucount4;        /* CPU packet counter */
++	u16  cpucount5;        /* CPU packet counter */
++	u16  cecount4;         /* QE  packet counter */
++	u16  cecount5;         /* QE  packet counter */
++	u16  cpucount6;        /* CPU packet counter */
++	u16  cpucount7;        /* CPU packet counter */
++	u16  cecount6;         /* QE  packet counter */
++	u16  cecount7;         /* QE  packet counter */
++	u32  weightstatus[MAX_TX_QUEUES]; /* accumulated weight factor */
++	u32  rtsrshadow;       /* temporary variable handled by QE */
++	u32  time;             /* temporary variable handled by QE */
++	u32  ttl;              /* temporary variable handled by QE */
++	u32  mblinterval;      /* max burst length interval        */
++	u16  nortsrbytetime;   /* normalized value of byte time in tsr units */
++	u8   fracsiz;
++	u8   res0[1];
++	u8   strictpriorityq;  /* Strict Priority Mask register */
++	u8   txasap;           /* Transmit ASAP register        */
++	u8   extrabw;          /* Extra BandWidth register      */
++	u8   oldwfqmask;       /* temporary variable handled by QE */
++	u8   weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */
++	u32  minw;             /* temporary variable handled by QE */
++	u8   res1[0x70-0x64];
++} __attribute__ ((packed)) uec_scheduler_t;
++
++/* Tx firmware counters
++*/
++typedef struct uec_tx_firmware_statistics_pram {
++	u32  sicoltx;            /* single collision */
++	u32  mulcoltx;           /* multiple collision */
++	u32  latecoltxfr;        /* late collision */
++	u32  frabortduecol;      /* frames aborted due to tx collision */
++	u32  frlostinmactxer;    /* frames lost due to internal MAC error tx */
++	u32  carriersenseertx;   /* carrier sense error */
++	u32  frtxok;             /* frames transmitted OK */
++	u32  txfrexcessivedefer;
++	u32  txpkts256;          /* total packets(including bad) 256~511 B */
++	u32  txpkts512;          /* total packets(including bad) 512~1023B */
++	u32  txpkts1024;         /* total packets(including bad) 1024~1518B */
++	u32  txpktsjumbo;        /* total packets(including bad)  >1024 */
++} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t;
++
++/* Tx global parameter table
++*/
++typedef struct uec_tx_global_pram {
++	u16  temoder;
++	u8   res0[0x38-0x02];
++	u32  sqptr;
++	u32  schedulerbasepointer;
++	u32  txrmonbaseptr;
++	u32  tstate;
++	u8   iphoffset[MAX_IPH_OFFSET_ENTRY];
++	u32  vtagtable[0x8];
++	u32  tqptr;
++	u8   res2[0x80-0x74];
++} __attribute__ ((packed)) uec_tx_global_pram_t;
++
++
++/****** Rx data struct collection ******/
++/* Rx thread data, each Rx thread has one this struct.
++*/
++typedef struct uec_thread_data_rx {
++	u8   res0[40];
++} __attribute__ ((packed)) uec_thread_data_rx_t;
++
++/* Rx thread parameter, each Rx thread has one this struct.
++*/
++typedef struct uec_thread_rx_pram {
++	u8   res0[128];
++} __attribute__ ((packed)) uec_thread_rx_pram_t;
++
++/* Rx firmware counters
++*/
++typedef struct uec_rx_firmware_statistics_pram {
++	u32   frrxfcser;         /* frames with crc error */
++	u32   fraligner;         /* frames with alignment error */
++	u32   inrangelenrxer;    /* in range length error */
++	u32   outrangelenrxer;   /* out of range length error */
++	u32   frtoolong;         /* frame too long */
++	u32   runt;              /* runt */
++	u32   verylongevent;     /* very long event */
++	u32   symbolerror;       /* symbol error */
++	u32   dropbsy;           /* drop because of BD not ready */
++	u8    res0[0x8];
++	u32   mismatchdrop;      /* drop because of MAC filtering */
++	u32   underpkts;         /* total frames less than 64 octets */
++	u32   pkts256;           /* total frames(including bad)256~511 B */
++	u32   pkts512;           /* total frames(including bad)512~1023 B */
++	u32   pkts1024;          /* total frames(including bad)1024~1518 B */
++	u32   pktsjumbo;         /* total frames(including bad) >1024 B */
++	u32   frlossinmacer;
++	u32   pausefr;           /* pause frames */
++	u8    res1[0x4];
++	u32   removevlan;
++	u32   replacevlan;
++	u32   insertvlan;
++} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t;
++
++/* Rx interrupt coalescing entry, each Rx queue has one this entry.
++*/
++typedef struct uec_rx_interrupt_coalescing_entry {
++	u32   maxvalue;
++	u32   counter;
++} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t;
++
++typedef struct uec_rx_interrupt_coalescing_table {
++	uec_rx_interrupt_coalescing_entry_t   entry[MAX_RX_QUEUES];
++} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t;
++
++/* RxBD queue entry, each Rx queue has one this entry.
++*/
++typedef struct uec_rx_bd_queues_entry {
++	u32   bdbaseptr;         /* BD base pointer          */
++	u32   bdptr;             /* BD pointer               */
++	u32   externalbdbaseptr; /* external BD base pointer */
++	u32   externalbdptr;     /* external BD pointer      */
++} __attribute__ ((packed)) uec_rx_bd_queues_entry_t;
++
++/* Rx global paramter table
++*/
++typedef struct uec_rx_global_pram {
++	u32  remoder;             /* ethernet mode reg. */
++	u32  rqptr;               /* base pointer to the Rx Queues */
++	u32  res0[0x1];
++	u8   res1[0x20-0xC];
++	u16  typeorlen;
++	u8   res2[0x1];
++	u8   rxgstpack;           /* ack on GRACEFUL STOP RX command */
++	u32  rxrmonbaseptr;       /* Rx RMON statistics base */
++	u8   res3[0x30-0x28];
++	u32  intcoalescingptr;    /* Interrupt coalescing table pointer */
++	u8   res4[0x36-0x34];
++	u8   rstate;
++	u8   res5[0x46-0x37];
++	u16  mrblr;               /* max receive buffer length reg. */
++	u32  rbdqptr;             /* RxBD parameter table description */
++	u16  mflr;                /* max frame length reg. */
++	u16  minflr;              /* min frame length reg. */
++	u16  maxd1;               /* max dma1 length reg. */
++	u16  maxd2;               /* max dma2 length reg. */
++	u32  ecamptr;             /* external CAM address */
++	u32  l2qt;                /* VLAN priority mapping table. */
++	u32  l3qt[0x8];           /* IP   priority mapping table. */
++	u16  vlantype;            /* vlan type */
++	u16  vlantci;             /* default vlan tci */
++	u8   addressfiltering[64];/* address filtering data structure */
++	u32  exfGlobalParam;      /* extended filtering global parameters */
++	u8   res6[0x100-0xC4];    /* Initialize to zero */
++} __attribute__ ((packed)) uec_rx_global_pram_t;
++
++#define GRACEFUL_STOP_ACKNOWLEDGE_RX            0x01
++
++
++/****** UEC common ******/
++/* UCC statistics - hardware counters
++*/
++typedef struct uec_hardware_statistics {
++	u32 tx64;
++	u32 tx127;
++	u32 tx255;
++	u32 rx64;
++	u32 rx127;
++	u32 rx255;
++	u32 txok;
++	u16 txcf;
++	u32 tmca;
++	u32 tbca;
++	u32 rxfok;
++	u32 rxbok;
++	u32 rbyt;
++	u32 rmca;
++	u32 rbca;
++} __attribute__ ((packed)) uec_hardware_statistics_t;
++
++/* InitEnet command parameter
++*/
++typedef struct uec_init_cmd_pram {
++	u8   resinit0;
++	u8   resinit1;
++	u8   resinit2;
++	u8   resinit3;
++	u16  resinit4;
++	u8   res1[0x1];
++	u8   largestexternallookupkeysize;
++	u32  rgftgfrxglobal;
++	u32  rxthread[MAX_ENET_INIT_PARAM_ENTRIES_RX]; /* rx threads */
++	u8   res2[0x38 - 0x30];
++	u32  txglobal;				   /* tx global  */
++	u32  txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */
++	u8   res3[0x1];
++} __attribute__ ((packed)) uec_init_cmd_pram_t;
++
++#define ENET_INIT_PARAM_RGF_SHIFT		(32 - 4)
++#define ENET_INIT_PARAM_TGF_SHIFT		(32 - 8)
++
++#define ENET_INIT_PARAM_RISC_MASK		0x0000003f
++#define ENET_INIT_PARAM_PTR_MASK		0x00ffffc0
++#define ENET_INIT_PARAM_SNUM_MASK		0xff000000
++#define ENET_INIT_PARAM_SNUM_SHIFT		24
++
++#define ENET_INIT_PARAM_MAGIC_RES_INIT0		0x06
++#define ENET_INIT_PARAM_MAGIC_RES_INIT1		0x30
++#define ENET_INIT_PARAM_MAGIC_RES_INIT2		0xff
++#define ENET_INIT_PARAM_MAGIC_RES_INIT3		0x00
++#define ENET_INIT_PARAM_MAGIC_RES_INIT4		0x0400
++
++/* structure representing 82xx Address Filtering Enet Address in PRAM
++*/
++typedef struct uec_82xx_enet_address {
++	u8   res1[0x2];
++	u16  h;       /* address (MSB) */
++	u16  m;       /* address       */
++	u16  l;       /* address (LSB) */
++} __attribute__ ((packed)) uec_82xx_enet_address_t;
++
++/* structure representing 82xx Address Filtering PRAM
++*/
++typedef struct uec_82xx_address_filtering_pram {
++	u32  iaddr_h;        /* individual address filter, high */
++	u32  iaddr_l;        /* individual address filter, low  */
++	u32  gaddr_h;        /* group address filter, high      */
++	u32  gaddr_l;        /* group address filter, low       */
++	uec_82xx_enet_address_t    taddr;
++	uec_82xx_enet_address_t    paddr[4];
++	u8                         res0[0x40-0x38];
++} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t;
++
++/* Buffer Descriptor
++*/
++typedef struct buffer_descriptor {
++	u16 status;
++	u16 len;
++	u32 data;
++} __attribute__ ((packed)) qe_bd_t, *p_bd_t;
++
++#define	SIZEOFBD		sizeof(qe_bd_t)
++
++/* Common BD flags
++*/
++#define BD_WRAP			0x2000
++#define BD_INT			0x1000
++#define BD_LAST			0x0800
++#define BD_CLEAN		0x3000
++
++/* TxBD status flags
++*/
++#define TxBD_READY		0x8000
++#define TxBD_PADCRC		0x4000
++#define TxBD_WRAP		BD_WRAP
++#define TxBD_INT		BD_INT
++#define TxBD_LAST		BD_LAST
++#define TxBD_TXCRC		0x0400
++#define TxBD_DEF		0x0200
++#define TxBD_PP			0x0100
++#define TxBD_LC			0x0080
++#define TxBD_RL			0x0040
++#define TxBD_RC			0x003C
++#define TxBD_UNDERRUN		0x0002
++#define TxBD_TRUNC		0x0001
++
++#define TxBD_ERROR		(TxBD_UNDERRUN | TxBD_TRUNC)
++
++/* RxBD status flags
++*/
++#define RxBD_EMPTY		0x8000
++#define RxBD_OWNER		0x4000
++#define RxBD_WRAP		BD_WRAP
++#define RxBD_INT		BD_INT
++#define RxBD_LAST		BD_LAST
++#define RxBD_FIRST		0x0400
++#define RxBD_CMR		0x0200
++#define RxBD_MISS		0x0100
++#define RxBD_BCAST		0x0080
++#define RxBD_MCAST		0x0040
++#define RxBD_LG			0x0020
++#define RxBD_NO			0x0010
++#define RxBD_SHORT		0x0008
++#define RxBD_CRCERR		0x0004
++#define RxBD_OVERRUN		0x0002
++#define RxBD_IPCH		0x0001
++
++#define RxBD_ERROR		(RxBD_LG | RxBD_NO | RxBD_SHORT | \
++				 RxBD_CRCERR | RxBD_OVERRUN)
++
++/* BD access macros
++*/
++#define BD_STATUS(_bd)			(((p_bd_t)(_bd))->status)
++#define BD_STATUS_SET(_bd, _val)	(((p_bd_t)(_bd))->status = _val)
++#define BD_LENGTH(_bd)			(((p_bd_t)(_bd))->len)
++#define BD_LENGTH_SET(_bd, _val)	(((p_bd_t)(_bd))->len = _val)
++#define BD_DATA_CLEAR(_bd)		(((p_bd_t)(_bd))->data = 0)
++#define BD_IS_DATA(_bd)			(((p_bd_t)(_bd))->data)
++#define BD_DATA(_bd)			((u8 *)(((p_bd_t)(_bd))->data))
++#define BD_DATA_SET(_bd, _data)		(((p_bd_t)(_bd))->data = (u32)(_data))
++#define BD_ADVANCE(_bd,_status,_base)	\
++	(((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd))
++
++/* Rx Prefetched BDs
++*/
++typedef struct uec_rx_prefetched_bds {
++    qe_bd_t   bd[MAX_PREFETCHED_BDS]; /* prefetched bd */
++} __attribute__ ((packed)) uec_rx_prefetched_bds_t;
++
++/* Alignments
++ */
++#define UEC_RX_GLOBAL_PRAM_ALIGNMENT				64
++#define UEC_TX_GLOBAL_PRAM_ALIGNMENT				64
++#define UEC_THREAD_RX_PRAM_ALIGNMENT				128
++#define UEC_THREAD_TX_PRAM_ALIGNMENT				64
++#define UEC_THREAD_DATA_ALIGNMENT				256
++#define UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT		32
++#define UEC_SCHEDULER_ALIGNMENT					4
++#define UEC_TX_STATISTICS_ALIGNMENT				4
++#define UEC_RX_STATISTICS_ALIGNMENT				4
++#define UEC_RX_INTERRUPT_COALESCING_ALIGNMENT			4
++#define UEC_RX_BD_QUEUES_ALIGNMENT				8
++#define UEC_RX_PREFETCHED_BDS_ALIGNMENT				128
++#define UEC_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT	4
++#define UEC_RX_BD_RING_ALIGNMENT				32
++#define UEC_TX_BD_RING_ALIGNMENT				32
++#define UEC_MRBLR_ALIGNMENT					128
++#define UEC_RX_BD_RING_SIZE_ALIGNMENT				4
++#define UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT			32
++#define UEC_RX_DATA_BUF_ALIGNMENT				64
++
++#define UEC_VLAN_PRIORITY_MAX					8
++#define UEC_IP_PRIORITY_MAX					64
++#define UEC_TX_VTAG_TABLE_ENTRY_MAX				8
++#define UEC_RX_BD_RING_SIZE_MIN					8
++#define UEC_TX_BD_RING_SIZE_MIN					2
++
++/* Ethernet speed
++*/
++typedef enum enet_speed {
++	ENET_SPEED_10BT,   /* 10 Base T */
++	ENET_SPEED_100BT,  /* 100 Base T */
++	ENET_SPEED_1000BT  /* 1000 Base T */
++} enet_speed_e;
++
++/* Ethernet Address Type.
++*/
++typedef enum enet_addr_type {
++	ENET_ADDR_TYPE_INDIVIDUAL,
++	ENET_ADDR_TYPE_GROUP,
++	ENET_ADDR_TYPE_BROADCAST
++} enet_addr_type_e;
++
++/* TBI / MII Set Register
++*/
++typedef enum enet_tbi_mii_reg {
++	ENET_TBI_MII_CR        = 0x00,
++	ENET_TBI_MII_SR        = 0x01,
++	ENET_TBI_MII_ANA       = 0x04,
++	ENET_TBI_MII_ANLPBPA   = 0x05,
++	ENET_TBI_MII_ANEX      = 0x06,
++	ENET_TBI_MII_ANNPT     = 0x07,
++	ENET_TBI_MII_ANLPANP   = 0x08,
++	ENET_TBI_MII_EXST      = 0x0F,
++	ENET_TBI_MII_JD        = 0x10,
++	ENET_TBI_MII_TBICON    = 0x11
++} enet_tbi_mii_reg_e;
++
++/* UEC number of threads
++*/
++typedef enum uec_num_of_threads {
++	UEC_NUM_OF_THREADS_1  = 0x1,  /* 1 */
++	UEC_NUM_OF_THREADS_2  = 0x2,  /* 2 */
++	UEC_NUM_OF_THREADS_4  = 0x0,  /* 4 */
++	UEC_NUM_OF_THREADS_6  = 0x3,  /* 6 */
++	UEC_NUM_OF_THREADS_8  = 0x4   /* 8 */
++} uec_num_of_threads_e;
++
++/* UEC ethernet interface type
++*/
++typedef enum enet_interface {
++	ENET_10_MII,
++	ENET_10_RMII,
++	ENET_10_RGMII,
++	ENET_100_MII,
++	ENET_100_RMII,
++	ENET_100_RGMII,
++	ENET_1000_GMII,
++	ENET_1000_RGMII,
++	ENET_1000_TBI,
++	ENET_1000_RTBI
++} enet_interface_e;
++
++/* UEC initialization info struct
++*/
++typedef struct uec_info {
++	ucc_fast_info_t			uf_info;
++	uec_num_of_threads_e		num_threads_tx;
++	uec_num_of_threads_e		num_threads_rx;
++	qe_risc_allocation_e		riscTx;
++	qe_risc_allocation_e		riscRx;
++	u16				rx_bd_ring_len;
++	u16				tx_bd_ring_len;
++	u8				phy_address;
++	enet_interface_e		enet_interface;
++} uec_info_t;
++
++/* UEC driver initialized info
++*/
++#define MAX_RXBUF_LEN			1536
++#define MAX_FRAME_LEN			1518
++#define MIN_FRAME_LEN			64
++#define MAX_DMA1_LEN			1520
++#define MAX_DMA2_LEN			1520
++
++/* UEC driver private struct
++*/
++typedef struct uec_private {
++	uec_info_t			*uec_info;
++	ucc_fast_private_t		*uccf;
++	struct eth_device		*dev;
++	uec_t				*uec_regs;
++	/* enet init command parameter */
++	uec_init_cmd_pram_t		*p_init_enet_param;
++	u32				init_enet_param_offset;
++	/* Rx and Tx paramter */
++	uec_rx_global_pram_t		*p_rx_glbl_pram;
++	u32				rx_glbl_pram_offset;
++	uec_tx_global_pram_t		*p_tx_glbl_pram;
++	u32				tx_glbl_pram_offset;
++	uec_send_queue_mem_region_t	*p_send_q_mem_reg;
++	u32				send_q_mem_reg_offset;
++	uec_thread_data_tx_t		*p_thread_data_tx;
++	u32				thread_dat_tx_offset;
++	uec_thread_data_rx_t		*p_thread_data_rx;
++	u32				thread_dat_rx_offset;
++	uec_rx_bd_queues_entry_t	*p_rx_bd_qs_tbl;
++	u32				rx_bd_qs_tbl_offset;
++	/* BDs specific */
++	u8				*p_tx_bd_ring;
++	u32				tx_bd_ring_offset;
++	u8				*p_rx_bd_ring;
++	u32				rx_bd_ring_offset;
++	u8				*p_rx_buf;
++	u32				rx_buf_offset;
++	volatile qe_bd_t		*txBd;
++	volatile qe_bd_t		*rxBd;
++	/* Status */
++	int				mac_tx_enabled;
++	int				mac_rx_enabled;
++	int				grace_stopped_tx;
++	int				grace_stopped_rx;
++	int				the_first_run;
++	/* PHY specific */
++	struct uec_mii_info 		*mii_info;
++	int				oldspeed;
++	int				oldduplex;
++	int				oldlink;
++} uec_private_t;
++
++#endif /* __UEC_H__ */
+diff -Naupr u-boot-1.1.6/drivers/qe/uec_phy.c u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.c
+--- u-boot-1.1.6/drivers/qe/uec_phy.c	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.c	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,607 @@
++/*
++ * Copyright (C) 2005 Freescale Semiconductor, Inc.
++ *
++ * Author: Shlomi Gridish
++ *
++ * Description: UCC GETH Driver -- PHY handling
++ *		Driver for UEC on QE
++ *		Based on 8260_io/fcc_enet.c
++ *
++ * This program is free software; you can redistribute	it and/or modify it
++ * under  the terms of	the GNU General	 Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include "common.h"
++#include "net.h"
++#include "malloc.h"
++#include "asm/errno.h"
++#include "asm/immap_qe.h"
++#include "asm/io.h"
++#include "qe.h"
++#include "uccf.h"
++#include "uec.h"
++#include "uec_phy.h"
++#include "miiphy.h"
++
++#if defined(CONFIG_QE)
++
++#define UEC_VERBOSE_DEBUG
++#define ugphy_printk(format, arg...)  \
++	printf(format "\n", ## arg)
++
++#define ugphy_dbg(format, arg...)	     \
++	ugphy_printk(format , ## arg)
++#define ugphy_err(format, arg...)	     \
++	ugphy_printk(format , ## arg)
++#define ugphy_info(format, arg...)	     \
++	ugphy_printk(format , ## arg)
++#define ugphy_warn(format, arg...)	     \
++	ugphy_printk(format , ## arg)
++
++#ifdef UEC_VERBOSE_DEBUG
++#define ugphy_vdbg ugphy_dbg
++#else
++#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
++#endif /* UEC_VERBOSE_DEBUG */
++
++static void config_genmii_advert (struct uec_mii_info *mii_info);
++static void genmii_setup_forced (struct uec_mii_info *mii_info);
++static void genmii_restart_aneg (struct uec_mii_info *mii_info);
++static int gbit_config_aneg (struct uec_mii_info *mii_info);
++static int genmii_config_aneg (struct uec_mii_info *mii_info);
++static int genmii_update_link (struct uec_mii_info *mii_info);
++static int genmii_read_status (struct uec_mii_info *mii_info);
++u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
++void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
++
++/* Write value to the PHY for this device to the register at regnum, */
++/* waiting until the write is done before it returns.  All PHY */
++/* configuration has to be done through the TSEC1 MIIM regs */
++void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
++{
++	uec_private_t *ugeth = (uec_private_t *) dev->priv;
++	uec_t *ug_regs;
++	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
++	u32 tmp_reg;
++
++	ug_regs = ugeth->uec_regs;
++
++	/* Stop the MII management read cycle */
++	out_be32 (&ug_regs->miimcom, 0);
++	/* Setting up the MII Mangement Address Register */
++	tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
++	out_be32 (&ug_regs->miimadd, tmp_reg);
++
++	/* Setting up the MII Mangement Control Register with the value */
++	out_be32 (&ug_regs->miimcon, (u32) value);
++
++	/* Wait till MII management write is complete */
++	while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
++
++	udelay (100000);
++}
++
++/* Reads from register regnum in the PHY for device dev, */
++/* returning the value.  Clears miimcom first.  All PHY */
++/* configuration has to be done through the TSEC1 MIIM regs */
++int read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
++{
++	uec_private_t *ugeth = (uec_private_t *) dev->priv;
++	uec_t *ug_regs;
++	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
++	u32 tmp_reg;
++	u16 value;
++
++	ug_regs = ugeth->uec_regs;
++
++	/* Setting up the MII Mangement Address Register */
++	tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
++	out_be32 (&ug_regs->miimadd, tmp_reg);
++
++	/* Perform an MII management read cycle */
++	out_be32 (&ug_regs->miimcom, 0);
++	out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
++
++	/* Wait till MII management write is complete */
++	while ((in_be32 (&ug_regs->miimind)) &
++	       (MIIMIND_NOT_VALID | MIIMIND_BUSY));
++
++	udelay (100000);
++
++	/* Read MII management status  */
++	value = (u16) in_be32 (&ug_regs->miimstat);
++	if (value == 0xffff)
++		ugphy_warn
++			("read wrong value : mii_id %d,mii_reg %d, base %08x",
++			 mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
++
++	return (value);
++}
++
++void mii_clear_phy_interrupt (struct uec_mii_info *mii_info)
++{
++	if (mii_info->phyinfo->ack_interrupt)
++		mii_info->phyinfo->ack_interrupt (mii_info);
++}
++
++void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
++				  u32 interrupts)
++{
++	mii_info->interrupts = interrupts;
++	if (mii_info->phyinfo->config_intr)
++		mii_info->phyinfo->config_intr (mii_info);
++}
++
++/* Writes MII_ADVERTISE with the appropriate values, after
++ * sanitizing advertise to make sure only supported features
++ * are advertised
++ */
++static void config_genmii_advert (struct uec_mii_info *mii_info)
++{
++	u32 advertise;
++	u16 adv;
++
++	/* Only allow advertising what this PHY supports */
++	mii_info->advertising &= mii_info->phyinfo->features;
++	advertise = mii_info->advertising;
++
++	/* Setup standard advertisement */
++	adv = phy_read (mii_info, PHY_ANAR);
++	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
++	if (advertise & ADVERTISED_10baseT_Half)
++		adv |= ADVERTISE_10HALF;
++	if (advertise & ADVERTISED_10baseT_Full)
++		adv |= ADVERTISE_10FULL;
++	if (advertise & ADVERTISED_100baseT_Half)
++		adv |= ADVERTISE_100HALF;
++	if (advertise & ADVERTISED_100baseT_Full)
++		adv |= ADVERTISE_100FULL;
++	phy_write (mii_info, PHY_ANAR, adv);
++}
++
++static void genmii_setup_forced (struct uec_mii_info *mii_info)
++{
++	u16 ctrl;
++	u32 features = mii_info->phyinfo->features;
++
++	ctrl = phy_read (mii_info, PHY_BMCR);
++
++	ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS |
++		  PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON);
++	ctrl |= PHY_BMCR_RESET;
++
++	switch (mii_info->speed) {
++	case SPEED_1000:
++		if (features & (SUPPORTED_1000baseT_Half
++				| SUPPORTED_1000baseT_Full)) {
++			ctrl |= PHY_BMCR_1000_MBPS;
++			break;
++		}
++		mii_info->speed = SPEED_100;
++	case SPEED_100:
++		if (features & (SUPPORTED_100baseT_Half
++				| SUPPORTED_100baseT_Full)) {
++			ctrl |= PHY_BMCR_100_MBPS;
++			break;
++		}
++		mii_info->speed = SPEED_10;
++	case SPEED_10:
++		if (features & (SUPPORTED_10baseT_Half
++				| SUPPORTED_10baseT_Full))
++			break;
++	default:		/* Unsupported speed! */
++		ugphy_err ("%s: Bad speed!", mii_info->dev->name);
++		break;
++	}
++
++	phy_write (mii_info, PHY_BMCR, ctrl);
++}
++
++/* Enable and Restart Autonegotiation */
++static void genmii_restart_aneg (struct uec_mii_info *mii_info)
++{
++	u16 ctl;
++
++	ctl = phy_read (mii_info, PHY_BMCR);
++	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
++	phy_write (mii_info, PHY_BMCR, ctl);
++}
++
++static int gbit_config_aneg (struct uec_mii_info *mii_info)
++{
++	u16 adv;
++	u32 advertise;
++
++	if (mii_info->autoneg) {
++		/* Configure the ADVERTISE register */
++		config_genmii_advert (mii_info);
++		advertise = mii_info->advertising;
++
++		adv = phy_read (mii_info, MII_1000BASETCONTROL);
++		adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
++			 MII_1000BASETCONTROL_HALFDUPLEXCAP);
++		if (advertise & SUPPORTED_1000baseT_Half)
++			adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
++		if (advertise & SUPPORTED_1000baseT_Full)
++			adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
++		phy_write (mii_info, MII_1000BASETCONTROL, adv);
++
++		/* Start/Restart aneg */
++		genmii_restart_aneg (mii_info);
++	} else
++		genmii_setup_forced (mii_info);
++
++	return 0;
++}
++
++static int marvell_config_aneg (struct uec_mii_info *mii_info)
++{
++	/* The Marvell PHY has an errata which requires
++	 * that certain registers get written in order
++	 * to restart autonegotiation */
++	phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET);
++
++	phy_write (mii_info, 0x1d, 0x1f);
++	phy_write (mii_info, 0x1e, 0x200c);
++	phy_write (mii_info, 0x1d, 0x5);
++	phy_write (mii_info, 0x1e, 0);
++	phy_write (mii_info, 0x1e, 0x100);
++
++	gbit_config_aneg (mii_info);
++
++	return 0;
++}
++
++static int genmii_config_aneg (struct uec_mii_info *mii_info)
++{
++	if (mii_info->autoneg) {
++		config_genmii_advert (mii_info);
++		genmii_restart_aneg (mii_info);
++	} else
++		genmii_setup_forced (mii_info);
++
++	return 0;
++}
++
++static int genmii_update_link (struct uec_mii_info *mii_info)
++{
++	u16 status;
++
++	/* Do a fake read */
++	phy_read (mii_info, PHY_BMSR);
++
++	/* Read link and autonegotiation status */
++	status = phy_read (mii_info, PHY_BMSR);
++	if ((status & PHY_BMSR_LS) == 0)
++		mii_info->link = 0;
++	else
++		mii_info->link = 1;
++
++	/* If we are autonegotiating, and not done,
++	 * return an error */
++	if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP))
++		return -EAGAIN;
++
++	return 0;
++}
++
++static int genmii_read_status (struct uec_mii_info *mii_info)
++{
++	u16 status;
++	int err;
++
++	/* Update the link, but return if there
++	 * was an error */
++	err = genmii_update_link (mii_info);
++	if (err)
++		return err;
++
++	if (mii_info->autoneg) {
++		status = phy_read (mii_info, PHY_ANLPAR);
++
++		if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
++			mii_info->duplex = DUPLEX_FULL;
++		else
++			mii_info->duplex = DUPLEX_HALF;
++		if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
++			mii_info->speed = SPEED_100;
++		else
++			mii_info->speed = SPEED_10;
++		mii_info->pause = 0;
++	}
++	/* On non-aneg, we assume what we put in BMCR is the speed,
++	 * though magic-aneg shouldn't prevent this case from occurring
++	 */
++
++	return 0;
++}
++
++static int marvell_read_status (struct uec_mii_info *mii_info)
++{
++	u16 status;
++	int err;
++
++	/* Update the link, but return if there
++	 * was an error */
++	err = genmii_update_link (mii_info);
++	if (err)
++		return err;
++
++	/* If the link is up, read the speed and duplex */
++	/* If we aren't autonegotiating, assume speeds
++	 * are as set */
++	if (mii_info->autoneg && mii_info->link) {
++		int speed;
++
++		status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS);
++
++		/* Get the duplexity */
++		if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
++			mii_info->duplex = DUPLEX_FULL;
++		else
++			mii_info->duplex = DUPLEX_HALF;
++
++		/* Get the speed */
++		speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
++		switch (speed) {
++		case MII_M1011_PHY_SPEC_STATUS_1000:
++			mii_info->speed = SPEED_1000;
++			break;
++		case MII_M1011_PHY_SPEC_STATUS_100:
++			mii_info->speed = SPEED_100;
++			break;
++		default:
++			mii_info->speed = SPEED_10;
++			break;
++		}
++		mii_info->pause = 0;
++	}
++
++	return 0;
++}
++
++static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
++{
++	/* Clear the interrupts by reading the reg */
++	phy_read (mii_info, MII_M1011_IEVENT);
++
++	return 0;
++}
++
++static int marvell_config_intr (struct uec_mii_info *mii_info)
++{
++	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
++		phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
++	else
++		phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
++
++	return 0;
++}
++
++static int dm9161_init (struct uec_mii_info *mii_info)
++{
++	/* Reset the PHY */
++	phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) |
++		   PHY_BMCR_RESET);
++	/* PHY and MAC connect */
++	phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
++		   ~PHY_BMCR_ISO);
++#ifdef CONFIG_RMII_MODE
++	phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT);
++#else
++	phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
++#endif
++	config_genmii_advert (mii_info);
++	/* Start/restart aneg */
++	genmii_config_aneg (mii_info);
++	/* Delay to wait the aneg compeleted */
++	udelay (3000000);
++
++	return 0;
++}
++
++static int dm9161_config_aneg (struct uec_mii_info *mii_info)
++{
++	return 0;
++}
++
++static int dm9161_read_status (struct uec_mii_info *mii_info)
++{
++	u16 status;
++	int err;
++
++	/* Update the link, but return if there was an error */
++	err = genmii_update_link (mii_info);
++	if (err)
++		return err;
++	/* If the link is up, read the speed and duplex
++	   If we aren't autonegotiating assume speeds are as set */
++	if (mii_info->autoneg && mii_info->link) {
++		status = phy_read (mii_info, MII_DM9161_SCSR);
++		if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
++			mii_info->speed = SPEED_100;
++		else
++			mii_info->speed = SPEED_10;
++
++		if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
++			mii_info->duplex = DUPLEX_FULL;
++		else
++			mii_info->duplex = DUPLEX_HALF;
++	}
++
++	return 0;
++}
++
++static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
++{
++	/* Clear the interrupt by reading the reg */
++	phy_read (mii_info, MII_DM9161_INTR);
++
++	return 0;
++}
++
++static int dm9161_config_intr (struct uec_mii_info *mii_info)
++{
++	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
++		phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
++	else
++		phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
++
++	return 0;
++}
++
++static void dm9161_close (struct uec_mii_info *mii_info)
++{
++}
++
++static struct phy_info phy_info_dm9161 = {
++	.phy_id = 0x0181b880,
++	.phy_id_mask = 0x0ffffff0,
++	.name = "Davicom DM9161E",
++	.init = dm9161_init,
++	.config_aneg = dm9161_config_aneg,
++	.read_status = dm9161_read_status,
++	.close = dm9161_close,
++};
++
++static struct phy_info phy_info_dm9161a = {
++	.phy_id = 0x0181b8a0,
++	.phy_id_mask = 0x0ffffff0,
++	.name = "Davicom DM9161A",
++	.features = MII_BASIC_FEATURES,
++	.init = dm9161_init,
++	.config_aneg = dm9161_config_aneg,
++	.read_status = dm9161_read_status,
++	.ack_interrupt = dm9161_ack_interrupt,
++	.config_intr = dm9161_config_intr,
++	.close = dm9161_close,
++};
++
++static struct phy_info phy_info_marvell = {
++	.phy_id = 0x01410c00,
++	.phy_id_mask = 0xffffff00,
++	.name = "Marvell 88E11x1",
++	.features = MII_GBIT_FEATURES,
++	.config_aneg = &marvell_config_aneg,
++	.read_status = &marvell_read_status,
++	.ack_interrupt = &marvell_ack_interrupt,
++	.config_intr = &marvell_config_intr,
++};
++
++static struct phy_info phy_info_genmii = {
++	.phy_id = 0x00000000,
++	.phy_id_mask = 0x00000000,
++	.name = "Generic MII",
++	.features = MII_BASIC_FEATURES,
++	.config_aneg = genmii_config_aneg,
++	.read_status = genmii_read_status,
++};
++
++static struct phy_info *phy_info[] = {
++	&phy_info_dm9161,
++	&phy_info_dm9161a,
++	&phy_info_marvell,
++	&phy_info_genmii,
++	NULL
++};
++
++u16 phy_read (struct uec_mii_info *mii_info, u16 regnum)
++{
++	return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
++}
++
++void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
++{
++	mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
++}
++
++/* Use the PHY ID registers to determine what type of PHY is attached
++ * to device dev.  return a struct phy_info structure describing that PHY
++ */
++struct phy_info *get_phy_info (struct uec_mii_info *mii_info)
++{
++	u16 phy_reg;
++	u32 phy_ID;
++	int i;
++	struct phy_info *theInfo = NULL;
++
++	/* Grab the bits from PHYIR1, and put them in the upper half */
++	phy_reg = phy_read (mii_info, PHY_PHYIDR1);
++	phy_ID = (phy_reg & 0xffff) << 16;
++
++	/* Grab the bits from PHYIR2, and put them in the lower half */
++	phy_reg = phy_read (mii_info, PHY_PHYIDR2);
++	phy_ID |= (phy_reg & 0xffff);
++
++	/* loop through all the known PHY types, and find one that */
++	/* matches the ID we read from the PHY. */
++	for (i = 0; phy_info[i]; i++)
++		if (phy_info[i]->phy_id ==
++		    (phy_ID & phy_info[i]->phy_id_mask)) {
++			theInfo = phy_info[i];
++			break;
++		}
++
++	/* This shouldn't happen, as we have generic PHY support */
++	if (theInfo == NULL) {
++		ugphy_info ("UEC: PHY id %x is not supported!", phy_ID);
++		return NULL;
++	} else {
++		ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID);
++	}
++
++	return theInfo;
++}
++
++void marvell_phy_interface_mode (struct eth_device *dev,
++				 enet_interface_e mode)
++{
++	uec_private_t *uec = (uec_private_t *) dev->priv;
++	struct uec_mii_info *mii_info;
++
++	if (!uec->mii_info) {
++		printf ("%s: the PHY not intialized\n", __FUNCTION__);
++		return;
++	}
++	mii_info = uec->mii_info;
++
++	if (mode == ENET_100_RGMII) {
++		phy_write (mii_info, 0x00, 0x9140);
++		phy_write (mii_info, 0x1d, 0x001f);
++		phy_write (mii_info, 0x1e, 0x200c);
++		phy_write (mii_info, 0x1d, 0x0005);
++		phy_write (mii_info, 0x1e, 0x0000);
++		phy_write (mii_info, 0x1e, 0x0100);
++		phy_write (mii_info, 0x09, 0x0e00);
++		phy_write (mii_info, 0x04, 0x01e1);
++		phy_write (mii_info, 0x00, 0x9140);
++		phy_write (mii_info, 0x00, 0x1000);
++		udelay (100000);
++		phy_write (mii_info, 0x00, 0x2900);
++		phy_write (mii_info, 0x14, 0x0cd2);
++		phy_write (mii_info, 0x00, 0xa100);
++		phy_write (mii_info, 0x09, 0x0000);
++		phy_write (mii_info, 0x1b, 0x800b);
++		phy_write (mii_info, 0x04, 0x05e1);
++		phy_write (mii_info, 0x00, 0xa100);
++		phy_write (mii_info, 0x00, 0x2100);
++		udelay (1000000);
++	} else if (mode == ENET_10_RGMII) {
++		phy_write (mii_info, 0x14, 0x8e40);
++		phy_write (mii_info, 0x1b, 0x800b);
++		phy_write (mii_info, 0x14, 0x0c82);
++		phy_write (mii_info, 0x00, 0x8100);
++		udelay (1000000);
++	}
++}
++
++void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
++{
++#ifdef CONFIG_PHY_MODE_NEED_CHANGE
++	marvell_phy_interface_mode (dev, mode);
++#endif
++}
++#endif /* CONFIG_QE */
+diff -Naupr u-boot-1.1.6/drivers/qe/uec_phy.h u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.h
+--- u-boot-1.1.6/drivers/qe/uec_phy.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,259 @@
++/*
++ * Copyright (C) 2005 Freescale Semiconductor, Inc.
++ *
++ * Author: Shlomi Gridish <gridish@freescale.com>
++ *
++ * Description: UCC ethernet driver -- PHY handling
++ *		Driver for UEC on QE
++ *		Based on 8260_io/fcc_enet.c
++ *
++ * This program is free software; you can redistribute	it and/or modify it
++ * under  the terms of	the GNU General	 Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ */
++#ifndef __UEC_PHY_H__
++#define __UEC_PHY_H__
++
++#define MII_end ((u32)-2)
++#define MII_read ((u32)-1)
++
++#define MIIMIND_BUSY		0x00000001
++#define MIIMIND_NOTVALID	0x00000004
++
++#define UGETH_AN_TIMEOUT	2000
++
++/* 1000BT control (Marvell & BCM54xx at least) */
++#define MII_1000BASETCONTROL		      0x09
++#define MII_1000BASETCONTROL_FULLDUPLEXCAP    0x0200
++#define MII_1000BASETCONTROL_HALFDUPLEXCAP    0x0100
++
++/* Cicada Extended Control Register 1 */
++#define MII_CIS8201_EXT_CON1	    0x17
++#define MII_CIS8201_EXTCON1_INIT    0x0000
++
++/* Cicada Interrupt Mask Register */
++#define MII_CIS8201_IMASK	    0x19
++#define MII_CIS8201_IMASK_IEN	    0x8000
++#define MII_CIS8201_IMASK_SPEED	    0x4000
++#define MII_CIS8201_IMASK_LINK	    0x2000
++#define MII_CIS8201_IMASK_DUPLEX    0x1000
++#define MII_CIS8201_IMASK_MASK	    0xf000
++
++/* Cicada Interrupt Status Register */
++#define MII_CIS8201_ISTAT	    0x1a
++#define MII_CIS8201_ISTAT_STATUS    0x8000
++#define MII_CIS8201_ISTAT_SPEED	    0x4000
++#define MII_CIS8201_ISTAT_LINK	    0x2000
++#define MII_CIS8201_ISTAT_DUPLEX    0x1000
++
++/* Cicada Auxiliary Control/Status Register */
++#define MII_CIS8201_AUX_CONSTAT	       0x1c
++#define MII_CIS8201_AUXCONSTAT_INIT    0x0004
++#define MII_CIS8201_AUXCONSTAT_DUPLEX  0x0020
++#define MII_CIS8201_AUXCONSTAT_SPEED   0x0018
++#define MII_CIS8201_AUXCONSTAT_GBIT    0x0010
++#define MII_CIS8201_AUXCONSTAT_100     0x0008
++
++/* 88E1011 PHY Status Register */
++#define MII_M1011_PHY_SPEC_STATUS		0x11
++#define MII_M1011_PHY_SPEC_STATUS_1000		0x8000
++#define MII_M1011_PHY_SPEC_STATUS_100		0x4000
++#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK	0xc000
++#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX	0x2000
++#define MII_M1011_PHY_SPEC_STATUS_RESOLVED	0x0800
++#define MII_M1011_PHY_SPEC_STATUS_LINK		0x0400
++
++#define MII_M1011_IEVENT		0x13
++#define MII_M1011_IEVENT_CLEAR		0x0000
++
++#define MII_M1011_IMASK			0x12
++#define MII_M1011_IMASK_INIT		0x6400
++#define MII_M1011_IMASK_CLEAR		0x0000
++
++#define MII_DM9161_SCR			0x10
++#define MII_DM9161_SCR_INIT		0x0610
++#define MII_DM9161_SCR_RMII_INIT	0x0710
++
++/* DM9161 Specified Configuration and Status Register */
++#define MII_DM9161_SCSR			0x11
++#define MII_DM9161_SCSR_100F		0x8000
++#define MII_DM9161_SCSR_100H		0x4000
++#define MII_DM9161_SCSR_10F		0x2000
++#define MII_DM9161_SCSR_10H		0x1000
++
++/* DM9161 Interrupt Register */
++#define MII_DM9161_INTR			0x15
++#define MII_DM9161_INTR_PEND		0x8000
++#define MII_DM9161_INTR_DPLX_MASK	0x0800
++#define MII_DM9161_INTR_SPD_MASK	0x0400
++#define MII_DM9161_INTR_LINK_MASK	0x0200
++#define MII_DM9161_INTR_MASK		0x0100
++#define MII_DM9161_INTR_DPLX_CHANGE	0x0010
++#define MII_DM9161_INTR_SPD_CHANGE	0x0008
++#define MII_DM9161_INTR_LINK_CHANGE	0x0004
++#define MII_DM9161_INTR_INIT		0x0000
++#define MII_DM9161_INTR_STOP	\
++(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
++ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
++
++/* DM9161 10BT Configuration/Status */
++#define MII_DM9161_10BTCSR		0x12
++#define MII_DM9161_10BTCSR_INIT		0x7800
++
++#define MII_BASIC_FEATURES    (SUPPORTED_10baseT_Half | \
++		 SUPPORTED_10baseT_Full | \
++		 SUPPORTED_100baseT_Half | \
++		 SUPPORTED_100baseT_Full | \
++		 SUPPORTED_Autoneg | \
++		 SUPPORTED_TP | \
++		 SUPPORTED_MII)
++
++#define MII_GBIT_FEATURES    (MII_BASIC_FEATURES | \
++		 SUPPORTED_1000baseT_Half | \
++		 SUPPORTED_1000baseT_Full)
++
++#define MII_READ_COMMAND		0x00000001
++
++#define MII_INTERRUPT_DISABLED		0x0
++#define MII_INTERRUPT_ENABLED		0x1
++
++#define SPEED_10    10
++#define SPEED_100   100
++#define SPEED_1000  1000
++
++/* Duplex, half or full. */
++#define DUPLEX_HALF		0x00
++#define DUPLEX_FULL		0x01
++
++/* Indicates what features are supported by the interface. */
++#define SUPPORTED_10baseT_Half		(1 << 0)
++#define SUPPORTED_10baseT_Full		(1 << 1)
++#define SUPPORTED_100baseT_Half		(1 << 2)
++#define SUPPORTED_100baseT_Full		(1 << 3)
++#define SUPPORTED_1000baseT_Half	(1 << 4)
++#define SUPPORTED_1000baseT_Full	(1 << 5)
++#define SUPPORTED_Autoneg		(1 << 6)
++#define SUPPORTED_TP			(1 << 7)
++#define SUPPORTED_AUI			(1 << 8)
++#define SUPPORTED_MII			(1 << 9)
++#define SUPPORTED_FIBRE			(1 << 10)
++#define SUPPORTED_BNC			(1 << 11)
++#define SUPPORTED_10000baseT_Full	(1 << 12)
++
++#define ADVERTISED_10baseT_Half		(1 << 0)
++#define ADVERTISED_10baseT_Full		(1 << 1)
++#define ADVERTISED_100baseT_Half	(1 << 2)
++#define ADVERTISED_100baseT_Full	(1 << 3)
++#define ADVERTISED_1000baseT_Half	(1 << 4)
++#define ADVERTISED_1000baseT_Full	(1 << 5)
++#define ADVERTISED_Autoneg		(1 << 6)
++#define ADVERTISED_TP			(1 << 7)
++#define ADVERTISED_AUI			(1 << 8)
++#define ADVERTISED_MII			(1 << 9)
++#define ADVERTISED_FIBRE		(1 << 10)
++#define ADVERTISED_BNC			(1 << 11)
++#define ADVERTISED_10000baseT_Full	(1 << 12)
++
++/* Advertisement control register. */
++#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
++#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
++#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
++#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
++#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
++#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
++#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
++#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
++#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
++#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
++#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
++
++#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
++			ADVERTISE_CSMA)
++#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
++		       ADVERTISE_100HALF | ADVERTISE_100FULL)
++
++/* Taken from mii_if_info and sungem_phy.h */
++struct uec_mii_info {
++	/* Information about the PHY type */
++	/* And management functions */
++	struct phy_info *phyinfo;
++
++	struct eth_device *dev;
++
++	/* forced speed & duplex (no autoneg)
++	 * partner speed & duplex & pause (autoneg)
++	 */
++	int speed;
++	int duplex;
++	int pause;
++
++	/* The most recently read link state */
++	int link;
++
++	/* Enabled Interrupts */
++	u32 interrupts;
++
++	u32 advertising;
++	int autoneg;
++	int mii_id;
++
++	/* private data pointer */
++	/* For use by PHYs to maintain extra state */
++	void *priv;
++
++	/* Provided by ethernet driver */
++	int (*mdio_read) (struct eth_device * dev, int mii_id, int reg);
++	void (*mdio_write) (struct eth_device * dev, int mii_id, int reg,
++			    int val);
++};
++
++/* struct phy_info: a structure which defines attributes for a PHY
++ *
++ * id will contain a number which represents the PHY.  During
++ * startup, the driver will poll the PHY to find out what its
++ * UID--as defined by registers 2 and 3--is.  The 32-bit result
++ * gotten from the PHY will be ANDed with phy_id_mask to
++ * discard any bits which may change based on revision numbers
++ * unimportant to functionality
++ *
++ * There are 6 commands which take a ugeth_mii_info structure.
++ * Each PHY must declare config_aneg, and read_status.
++ */
++struct phy_info {
++	u32 phy_id;
++	char *name;
++	unsigned int phy_id_mask;
++	u32 features;
++
++	/* Called to initialize the PHY */
++	int (*init) (struct uec_mii_info * mii_info);
++
++	/* Called to suspend the PHY for power */
++	int (*suspend) (struct uec_mii_info * mii_info);
++
++	/* Reconfigures autonegotiation (or disables it) */
++	int (*config_aneg) (struct uec_mii_info * mii_info);
++
++	/* Determines the negotiated speed and duplex */
++	int (*read_status) (struct uec_mii_info * mii_info);
++
++	/* Clears any pending interrupts */
++	int (*ack_interrupt) (struct uec_mii_info * mii_info);
++
++	/* Enables or disables interrupts */
++	int (*config_intr) (struct uec_mii_info * mii_info);
++
++	/* Clears up any memory if needed */
++	void (*close) (struct uec_mii_info * mii_info);
++};
++
++struct phy_info *get_phy_info (struct uec_mii_info *mii_info);
++void write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
++		    int value);
++int read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
++void mii_clear_phy_interrupt (struct uec_mii_info *mii_info);
++void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
++				  u32 interrupts);
++#endif /* __UEC_PHY_H__ */
+diff -Naupr u-boot-1.1.6/drivers/tsec.c u-boot-1.1.6-fsl-1/drivers/tsec.c
+--- u-boot-1.1.6/drivers/tsec.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/tsec.c	2006-11-10 11:24:29.000000000 -0600
+@@ -610,11 +610,10 @@ static void adjust_link(struct eth_devic
+ 			regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+ 					 | MACCFG2_MII);
+ 
+-			/* If We're in reduced mode, we need
+-			 * to say whether we're 10 or 100 MB.
++			/* Set R100 bit in all modes although
++			 * it is only used in RGMII mode
+ 			 */
+-			if ((priv->speed == 100)
+-			    && (priv->flags & TSEC_REDUCED))
++			if (priv->speed == 100)
+ 				regs->ecntrl |= ECNTRL_R100;
+ 			else
+ 				regs->ecntrl &= ~(ECNTRL_R100);
+@@ -816,6 +815,7 @@ struct phy_info phy_info_M88E1111S = {
+ 			   {0x1d, 0x5, NULL},
+ 			   {0x1e, 0x0, NULL},
+ 			   {0x1e, 0x100, NULL},
++			   {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
+ 			   {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ 			   {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ 			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+@@ -1110,10 +1110,8 @@ struct phy_info phy_info_dp83865 = {
+ };
+ 
+ struct phy_info *phy_info[] = {
+-#if 0
+-	&phy_info_cis8201,
+-#endif
+ 	&phy_info_cis8204,
++	&phy_info_cis8201,
+ 	&phy_info_M88E1011S,
+ 	&phy_info_M88E1111S,
+ 	&phy_info_M88E1145,
+diff -Naupr u-boot-1.1.6/drivers/tsec.h u-boot-1.1.6-fsl-1/drivers/tsec.h
+--- u-boot-1.1.6/drivers/tsec.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/drivers/tsec.h	2006-11-10 11:24:29.000000000 -0600
+@@ -30,7 +30,7 @@
+ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+     #define TSEC_BASE_ADDR	(CFG_IMMR + CFG_TSEC1_OFFSET)
+ #elif defined(CONFIG_MPC83XX)
+-    #define TSEC_BASE_ADDR	(CFG_IMMRBAR + CFG_TSEC1_OFFSET)
++    #define TSEC_BASE_ADDR	(CFG_IMMR + CFG_TSEC1_OFFSET)
+ #endif
+ 
+ 
+diff -Naupr u-boot-1.1.6/include/74xx_7xx.h u-boot-1.1.6-fsl-1/include/74xx_7xx.h
+--- u-boot-1.1.6/include/74xx_7xx.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/74xx_7xx.h	2006-12-06 10:33:49.000000000 -0600
+@@ -111,6 +111,7 @@ typedef enum __cpu_t {
+ 	CPU_750CX, CPU_750FX, CPU_750GX,
+ 	CPU_7400,
+ 	CPU_7410,
++	CPU_7448,
+ 	CPU_7450, CPU_7455, CPU_7457,
+ 	CPU_UNKNOWN} cpu_t;
+ 
+diff -Naupr u-boot-1.1.6/include/ACEX1K.h u-boot-1.1.6-fsl-1/include/ACEX1K.h
+--- u-boot-1.1.6/include/ACEX1K.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/ACEX1K.h	2006-11-30 12:34:13.000000000 -0600
+@@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *des
+ extern int ACEX1K_info( Altera_desc *desc );
+ extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off );
+ 
++extern int CYC2_load( Altera_desc *desc, void *image, size_t size );
++extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize );
++extern int CYC2_info( Altera_desc *desc );
++extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off );
++
+ /* Slave Serial Implementation function table */
+ typedef struct {
+ 	Altera_pre_fn		pre;
+@@ -48,6 +53,18 @@ typedef struct {
+ 	int			relocated;
+ } Altera_ACEX1K_Passive_Serial_fns;
+ 
++/* Slave Serial Implementation function table */
++typedef struct {
++	Altera_pre_fn		pre;
++	Altera_config_fn	config;
++	Altera_status_fn	status;
++	Altera_done_fn		done;
++	Altera_write_fn		write;
++	Altera_abort_fn		abort;
++	Altera_post_fn		post;
++	int			relocated;
++} Altera_CYC2_Passive_Serial_fns;
++
+ /* Device Image Sizes
+  *********************************************************************/
+ /* ACEX1K */
+@@ -60,6 +77,8 @@ typedef struct {
+ #endif
+ #define Altera_EP1K100_SIZE  	(166965*8)
+ 
++#define Altera_EP2C35_SIZE	883905
++
+ /* Descriptor Macros
+  *********************************************************************/
+ /* ACEX1K devices */
+diff -Naupr u-boot-1.1.6/include/altera.h u-boot-1.1.6-fsl-1/include/altera.h
+--- u-boot-1.1.6/include/altera.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/altera.h	2006-11-30 12:34:13.000000000 -0600
+@@ -34,8 +34,10 @@
+ /* Altera Model definitions
+  *********************************************************************/
+ #define CFG_ACEX1K		CFG_FPGA_DEV( 0x1 )
++#define CFG_CYCLON2		CFG_FPGA_DEV( 0x2 )
+ 
+ #define CFG_ALTERA_ACEX1K	(CFG_FPGA_ALTERA | CFG_ACEX1K)
++#define CFG_ALTERA_CYCLON2	(CFG_FPGA_ALTERA | CFG_CYCLON2)
+ /* Add new models here */
+ 
+ /* Altera Interface definitions
+@@ -56,6 +58,7 @@ typedef enum {				/* typedef Altera_ifac
+ typedef enum {			/* typedef Altera_Family */
+     min_altera_type,		/* insert all new types after this */
+     Altera_ACEX1K,		/* ACEX1K Family */
++    Altera_CYC2,		/* CYCLONII Family */
+ /* Add new models here */
+     max_altera_type		/* insert all new types before this */
+ } Altera_Family;		/* end, typedef Altera_Family */
+@@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int coo
+ typedef int (*Altera_done_fn)( int cookie );
+ typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie );
+ typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie );
++typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie);
+ typedef int (*Altera_abort_fn)( int cookie );
+ typedef int (*Altera_post_fn)( int cookie );
+ 
+diff -Naupr u-boot-1.1.6/include/asm-ppc/e300.h u-boot-1.1.6-fsl-1/include/asm-ppc/e300.h
+--- u-boot-1.1.6/include/asm-ppc/e300.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/e300.h	2006-11-10 11:24:29.000000000 -0600
+@@ -12,6 +12,8 @@
+ #define PVR_83xx 0x80830000
+ #define PVR_8349_REV10 (PVR_83xx | 0x0010)
+ #define PVR_8349_REV11 (PVR_83xx | 0x0011)
++#define PVR_8360_REV10 (PVR_83xx | 0x0020)
++#define PVR_8360_REV11 (PVR_83xx | 0x0020)
+ 
+ /*
+  * Hardware Implementation-Dependent Register 0 (HID0)
+diff -Naupr u-boot-1.1.6/include/asm-ppc/fsl_i2c.h u-boot-1.1.6-fsl-1/include/asm-ppc/fsl_i2c.h
+--- u-boot-1.1.6/include/asm-ppc/fsl_i2c.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/fsl_i2c.h	2006-11-30 12:34:13.000000000 -0600
+@@ -83,8 +83,4 @@ typedef struct fsl_i2c {
+ 	u8 res6[0xE8];
+ } fsl_i2c_t;
+ 
+-
+-#define I2C_READ  1
+-#define I2C_WRITE 0
+-
+ #endif	/* _ASM_I2C_H_ */
+diff -Naupr u-boot-1.1.6/include/asm-ppc/global_data.h u-boot-1.1.6-fsl-1/include/asm-ppc/global_data.h
+--- u-boot-1.1.6/include/asm-ppc/global_data.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/global_data.h	2006-11-10 11:24:29.000000000 -0600
+@@ -52,17 +52,29 @@ typedef	struct	global_data {
+ #if defined(CONFIG_MPC83XX)
+ 	/* There are other clocks in the MPC83XX */
+ 	u32 csb_clk;
++#if defined (CONFIG_MPC8349)
+ 	u32 tsec1_clk;
+ 	u32 tsec2_clk;
+-	u32 core_clk;
+ 	u32 usbmph_clk;
+ 	u32 usbdr_clk;
+-	u32 i2c_clk;
++#endif /* CONFIG_MPC8349 */
++	u32 core_clk;
++	u32 i2c1_clk;
++	u32 i2c2_clk;
+ 	u32 enc_clk;
+ 	u32 lbiu_clk;
+ 	u32 lclk_clk;
+ 	u32 ddr_clk;
+ 	u32 pci_clk;
++#if defined(CONFIG_QE)
++	u32 qe_clk;
++	u32 brg_clk;
++	uint mp_alloc_base;
++	uint mp_alloc_top;
++#endif /* CONFIG_QE */
++#if defined (CONFIG_MPC8360)
++	u32  ddr_sec_clk;
++#endif /* CONFIG_MPC8360 */
+ #endif
+ #if defined(CONFIG_MPC5xxx)
+ 	unsigned long	ipb_clk;
+diff -Naupr u-boot-1.1.6/include/asm-ppc/i2c.h u-boot-1.1.6-fsl-1/include/asm-ppc/i2c.h
+--- u-boot-1.1.6/include/asm-ppc/i2c.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/i2c.h	1969-12-31 18:00:00.000000000 -0600
+@@ -1,103 +0,0 @@
+-/*
+- * Freescale I2C Controller
+- *
+- * This software may be used and distributed according to the
+- * terms of the GNU Public License, Version 2, incorporated
+- * herein by reference.
+- *
+- * Copyright 2004 Freescale Semiconductor.
+- * (C) Copyright 2003, Motorola, Inc.
+- * author: Eran Liberty (liberty@freescale.com)
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2 of
+- * the License, or (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+- * MA 02111-1307 USA
+- */
+-
+-#ifndef _ASM_I2C_H_
+-#define _ASM_I2C_H_
+-
+-#include <asm/types.h>
+-
+-typedef struct i2c
+-{
+-    u8 adr;          /**< I2C slave address              */
+-#define I2C_ADR	      0xFE
+-#define I2C_ADR_SHIFT 1
+-#define I2C_ADR_RES   ~(I2C_ADR)
+-    u8 res0[3];
+-    u8 fdr;          /**< I2C frequency divider register */
+-#define IC2_FDR       0x3F
+-#define IC2_FDR_SHIFT 0
+-#define IC2_FDR_RES   ~(IC2_FDR)
+-    u8 res1[3];
+-    u8 cr;           /**< I2C control redister           */
+-#define I2C_CR_MEN	  0x80
+-#define I2C_CR_MIEN	  0x40
+-#define I2C_CR_MSTA   0x20
+-#define I2C_CR_MTX    0x10
+-#define I2C_CR_TXAK   0x08
+-#define I2C_CR_RSTA   0x04
+-#define I2C_CR_BCST   0x01
+-    u8 res2[3];
+-    u8 sr;           /**< I2C status register            */
+-#define I2C_SR_MCF    0x80
+-#define I2C_SR_MAAS   0x40
+-#define I2C_SR_MBB    0x20
+-#define I2C_SR_MAL    0x10
+-#define I2C_SR_BCSTM  0x08
+-#define I2C_SR_SRW    0x04
+-#define I2C_SR_MIF    0x02
+-#define I2C_SR_RXAK   0x01
+-    u8 res3[3];
+-    u8 dr;           /**< I2C data register              */
+-#define I2C_DR 0xFF
+-#define I2C_DR_SHIFT 0
+-#define I2C_DR_RES ~(I2C_DR)
+-    u8 res4[3];
+-    u8 dfsrr;        /**< I2C digital filter sampling rate register */
+-#define I2C_DFSRR 0x3F
+-#define I2C_DFSRR_SHIFT 0
+-#define I2C_DFSRR_RES ~(I2C_DR)
+-    u8 res5[3];
+-    u8 res6[0xE8];
+-} i2c_t;
+-
+-#ifndef CFG_HZ
+-#error CFG_HZ is not defined in /include/configs/${BOARD}.h
+-#endif
+-#define I2C_TIMEOUT (CFG_HZ/4)
+-
+-#ifndef CFG_IMMRBAR
+-#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
+-#endif
+-
+-#ifndef CFG_I2C_OFFSET
+-#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h
+-#endif
+-
+-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
+-/*
+- * MPC8349 have two i2c bus
+- */
+-extern i2c_t * mpc8349_i2c;
+-#define I2C mpc8349_i2c
+-#else
+-#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
+-#endif
+-
+-#define I2C_READ  1
+-#define I2C_WRITE 0
+-
+-#endif	/* _ASM_I2C_H_ */
+diff -Naupr u-boot-1.1.6/include/asm-ppc/immap_83xx.h u-boot-1.1.6-fsl-1/include/asm-ppc/immap_83xx.h
+--- u-boot-1.1.6/include/asm-ppc/immap_83xx.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/immap_83xx.h	2006-12-06 10:33:49.000000000 -0600
+@@ -1,75 +1,116 @@
+ /*
+- * MPC8349 Internal Memory Map
+- * Copyright (c) 2004 Freescale Semiconductor.
+- * Eran Liberty (liberty@freescale.com)
++ * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
++ *
++ * MPC83xx Internal Memory Map
++ *
++ * History :
++ * 20060601: Daveliu (daveliu@freescale.com)
++ *	     TanyaJiang (tanya.jiang@freescale.com)
++ *	     Unified variable names for mpc83xx
++ * 2005	   : Mandy Lavi (mandy.lavi@freescale.com)
++ *	     support for mpc8360e
++ * 2004	   : Eran Liberty (liberty@freescale.com)
++ *	     Initialized for mpc8349
++ *	     based on:
++ *	     MPC8260 Internal Memory Map
++ *	     Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
++ *	     MPC85xx Internal Memory Map
++ *	     Copyright(c) 2002,2003 Motorola Inc.
++ *	     Xianghua Xiao (x.xiao@motorola.com)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
+  *
+- * based on:
+- * - MPC8260 Internal Memory Map
+- *   Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+- * - MPC85xx Internal Memory Map
+- *   Copyright(c) 2002,2003 Motorola Inc.
+- *   Xianghua Xiao (x.xiao@motorola.com)
+  */
+-#ifndef __IMMAP_8349__
+-#define __IMMAP_8349__
++#ifndef __IMMAP_83xx__
++#define __IMMAP_83xx__
+ 
++#include <config.h>
+ #include <asm/types.h>
+-#include <asm/i2c.h>
++#include <asm/fsl_i2c.h>
+ 
+ /*
+  * Local Access Window.
+  */
+-typedef struct law8349 {
+-	u32 bar; /* LBIU local access window base address register */
++typedef struct law83xx {
++	u32 bar;		/* LBIU local access window base address register */
+ /* Identifies the 20 most-significant address bits of the base of local
+  * access window n. The specified base address should be aligned to the
+  * window size, as defined by LBLAWARn[SIZE].
+  */
+-#define LAWBAR_BAR         0xFFFFF000
++#define LAWBAR_BAR	   0xFFFFF000
+ #define LAWBAR_RES	     ~(LAWBAR_BAR)
+-	u32 ar; /* LBIU local access window attribute register */
+-} law8349_t;
++	u32 ar;			/* LBIU local access window attribute register */
++} law83xx_t;
+ 
+ /*
+  * System configuration registers.
+  */
+-typedef struct sysconf8349 {
+-	u32 immrbar; /* Internal memory map base address register */
++typedef struct sysconf83xx {
++	u32 immrbar;		/* Internal memory map base address register */
+ 	u8 res0[0x04];
+-	u32 altcbar; /* Alternate configuration base address register */
++	u32 altcbar;		/* Alternate configuration base address register */
+ /* Identifies the12 most significant address bits of an alternate base
+  * address used for boot sequencer configuration accesses.
+  */
+ #define ALTCBAR_BASE_ADDR     0xFFF00000
+-#define ALTCBAR_RES           ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
++#define ALTCBAR_RES	      ~(ALTCBAR_BASE_ADDR)	/* Reserved. Write has no effect, read returns 0. */
+ 	u8 res1[0x14];
+-	law8349_t lblaw[4]; /* LBIU local access window */
++	law83xx_t lblaw[4];	/* LBIU local access window */
+ 	u8 res2[0x20];
+-	law8349_t pcilaw[2]; /* PCI local access window */
++	law83xx_t pcilaw[2];	/* PCI local access window */
+ 	u8 res3[0x30];
+-	law8349_t ddrlaw[2]; /* DDR local access window */
++	law83xx_t ddrlaw[2];	/* DDR local access window */
+ 	u8 res4[0x50];
+-	u32 sgprl; /* System General Purpose Register Low */
+-	u32 sgprh; /* System General Purpose Register High */
+-	u32 spridr; /* System Part and Revision ID Register */
+-#define SPRIDR_PARTID         0xFFFF0000 /* Part Identification. */
+-#define SPRIDR_REVID          0x0000FFFF /* Revision Identification. */
++	u32 sgprl;		/* System General Purpose Register Low */
++	u32 sgprh;		/* System General Purpose Register High */
++	u32 spridr;		/* System Part and Revision ID Register */
++#define SPRIDR_PARTID	      0xFFFF0000	/* Part Identification. */
++#define SPRIDR_REVID	      0x0000FFFF	/* Revision Identification. */
+ 	u8 res5[0x04];
+-	u32 spcr; /* System Priority Configuration Register */
+-#define SPCR_PCIHPE   0x10000000 /* PCI Highest Priority Enable. */
+-#define SPCR_PCIPR    0x03000000 /* PCI bridge system bus request priority. */
+-#define SPCR_TBEN     0x00400000 /* E300 PowerPC core time base unit enable. */
+-#define SPCR_COREPR   0x00300000 /* E300 PowerPC Core system bus request priority. */
+-#define SPCR_TSEC1DP  0x00003000 /* TSEC1 data priority. */
+-#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
+-#define SPCR_TSEC1EP  0x00000300 /* TSEC1 emergency priority. */
+-#define SPCR_TSEC2DP  0x00000030 /* TSEC2 data priority. */
+-#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
+-#define SPCR_TSEC2EP  0x00000003 /* TSEC2 emergency priority. */
++	u32 spcr;		/* System Priority Configuration Register */
++#define SPCR_PCIHPE   0x10000000	/* PCI Highest Priority Enable. */
++#define SPCR_PCIHPE_SHIFT	(31-3)
++#define SPCR_PCIPR    0x03000000	/* PCI bridge system bus request priority. */
++#define SPCR_PCIPR_SHIFT	(31-7)
++#define SPCR_OPT      0x00800000	/* Optimize */
++#define SPCR_TBEN     0x00400000	/* E300 PowerPC core time base unit enable. */
++#define SPCR_TBEN_SHIFT		(31-9)
++#define SPCR_COREPR   0x00300000	/* E300 PowerPC Core system bus request priority. */
++#define SPCR_COREPR_SHIFT	(31-11)
++#if defined (CONFIG_MPC8349)
++#define SPCR_TSEC1DP  0x00003000	/* TSEC1 data priority. */
++#define SPCR_TSEC1DP_SHIFT	(31-19)
++#define SPCR_TSEC1BDP 0x00000C00	/* TSEC1 buffer descriptor priority. */
++#define SPCR_TSEC1BDP_SHIFT	(31-21)
++#define SPCR_TSEC1EP  0x00000300	/* TSEC1 emergency priority. */
++#define SPCR_TSEC1EP_SHIFT	(31-23)
++#define SPCR_TSEC2DP  0x00000030	/* TSEC2 data priority. */
++#define SPCR_TSEC2DP_SHIFT	(31-27)
++#define SPCR_TSEC2BDP 0x0000000C	/* TSEC2 buffer descriptor priority. */
++#define SPCR_TSEC2BDP_SHIFT	(31-29)
++#define SPCR_TSEC2EP  0x00000003	/* TSEC2 emergency priority. */
++#define SPCR_TSEC2EP_SHIFT	(31-31)
+ #define SPCR_RES      ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
+ 			| SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
+ 			| SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
+-	u32 sicrl; /* System General Purpose Register Low */
++#elif defined (CONFIG_MPC8360)
++#define SPCR_RES      ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR)
++#endif
++	u32 sicrl;		/* System General Purpose Register Low */
++#if defined (CONFIG_MPC8349)
+ #define SICRL_LDP_A   0x80000000
+ #define SICRL_USB1    0x40000000
+ #define SICRL_USB0    0x20000000
+@@ -91,8 +132,18 @@ typedef struct sysconf8349 {
+ 			| SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \
+ 			| SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \
+ 			| SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L )
+-	u32 sicrh; /* System General Purpose Register High */
++#elif defined (CONFIG_MPC8360)
++#define SICRL_LDP_A   0xC0000000
++#define SICRL_LCLK_1  0x10000000
++#define SICRL_LCLK_2  0x08000000
++#define SICRL_SRCID_A 0x03000000
++#define SICRL_IRQ_CKSTP_A 0x00C00000
++#define SICRL_RES     ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \
++			SICRL_SRCID_A | SICRL_IRQ_CKSTP_A)
++#endif
++	u32 sicrh;		/* System General Purpose Register High */
+ #define SICRH_DDR     0x80000000
++#if defined (CONFIG_MPC8349)
+ #define SICRH_TSEC1_A 0x10000000
+ #define SICRH_TSEC1_B 0x08000000
+ #define SICRH_TSEC1_C 0x04000000
+@@ -117,7 +168,7 @@ typedef struct sysconf8349 {
+ #define SICRH_GPIO2_H 0x00000060
+ #define SICRH_TSOBI1  0x00000002
+ #define SICRH_TSOBI2  0x00000001
+-#define SICRh_RES     ~(  SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
++#define SICRH_RES     ~(  SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
+ 			| SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \
+ 			| SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \
+ 			| SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \
+@@ -126,207 +177,256 @@ typedef struct sysconf8349 {
+ 			| SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \
+ 			| SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \
+ 			| SICRH_TSOBI2)
++#elif defined (CONFIG_MPC8360)
++#define SICRH_SECONDARY_DDR 0x40000000
++#define SICRH_SDDROE   0x02000000	/* SDDRIOE bit from reset configuration word high. */
++#define SICRH_UC1EOBI  0x00000004	/* UCC1 Ethernet Output Buffer Impedance. */
++#define SICRH_UC2E1OBI 0x00000002	/* UCC2 Ethernet pin option 1 Output Buffer Impedance. */
++#define SICRH_UC2E2OBI 0x00000001	/* UCC2 Ethernet pin option 2 Output Buffer Impedance. */
++#define SICRH_RES     ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \
++			SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI)
++#endif
+ 	u8 res6[0xE4];
+-} sysconf8349_t;
++} sysconf83xx_t;
+ 
+ /*
+  * Watch Dog Timer (WDT) Registers
+  */
+-typedef struct wdt8349 {
++typedef struct wdt83xx {
+ 	u8 res0[4];
+-	u32 swcrr; /* System watchdog control register */
+-	u32 swcnr; /* System watchdog count register */
++	u32 swcrr;		/* System watchdog control register */
++	u32 swcnr;		/* System watchdog count register */
+ #define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+ #define SWCNR_RES  ~(SWCNR_SWCN)
+ 	u8 res1[2];
+-	u16 swsrr; /* System watchdog service register */
++	u16 swsrr;		/* System watchdog service register */
++#define SWSRR_WS 0x0000FFFF	/* Software Watchdog Service Field. */
+ 	u8 res2[0xF0];
+-} wdt8349_t;
++} wdt83xx_t;
+ 
+ /*
+  * RTC/PIT Module Registers
+  */
+-typedef struct rtclk8349 {
+-	u32 cnr; /* control register */
+-#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit  */
+-#define CNR_CLIN 0x00000040 /* Input Clock Control Bit  */
+-#define CNR_AIM  0x00000002 /* Alarm Interrupt Mask Bit  */
+-#define CNR_SIM  0x00000001 /* Second Interrupt Mask Bit  */
+-#define CNR_RES  ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
+-	u32 ldr; /* load register */
+-	u32 psr; /* prescale register */
+-	u32 ctr; /* register */
+-	u32 evr; /* event register */
+-#define RTEVR_SIF  0x00000001 /* Second Interrupt Flag Bit  */
+-#define RTEVR_AIF  0x00000002 /* Alarm Interrupt Flag Bit  */
+-#define RTEVR_RES  ~(EVR_SIF | EVR_AIF)
+-	u32 alr; /* alarm register */
++typedef struct rtclk83xx {
++	u32 cnr;		/* control register */
++#define CNR_CLEN 0x00000080	/* Clock Enable Control Bit  */
++#define CNR_CLIN 0x00000040	/* Input Clock Control Bit  */
++#define CNR_AIM	 0x00000002	/* Alarm Interrupt Mask Bit  */
++#define CNR_SIM	 0x00000001	/* Second Interrupt Mask Bit  */
++#define CNR_RES	 ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
++	u32 ldr;		/* load register */
++#define LDR_CLDV 0xFFFFFFFF	/* Contains the 32-bit value to be
++				 * loaded in a 32-bit RTC counter.*/
++	u32 psr;		/* prescale register */
++#define PSR_PRSC 0xFFFFFFFF	/*  RTC Prescaler bits. */
++	u32 ctr;		/* Counter value field register */
++#define CRT_CNTV 0xFFFFFFFF	/* RTC Counter value field. */
++	u32 evr;		/* event register */
++#define RTEVR_SIF  0x00000001	/* Second Interrupt Flag Bit  */
++#define RTEVR_AIF  0x00000002	/* Alarm Interrupt Flag Bit  */
++#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF)
++#define PTEVR_PIF  0x00000001	/* Periodic interrupt flag bit. */
++#define PTEVR_RES ~(PTEVR_PIF)
++	u32 alr;		/* alarm register */
+ 	u8 res0[0xE8];
+-} rtclk8349_t;
++} rtclk83xx_t;
+ 
+ /*
+  * Global timper module
+  */
+ 
+-typedef struct gtm8349 {
+-	u8    cfr1; /* Timer1/2 Configuration  */
+-#define CFR1_PCAS 0x80 /* Pair Cascade mode  */
+-#define CFR1_BCM  0x40  /* Backward compatible mode  */
+-#define CFR1_STP2 0x20 /* Stop timer  */
+-#define CFR1_RST2 0x10 /* Reset timer  */
+-#define CFR1_GM2  0x08 /* Gate mode for pin 2  */
+-#define CFR1_GM1  0x04 /* Gate mode for pin 1  */
+-#define CFR1_STP1 0x02 /* Stop timer  */
+-#define CFR1_RST1 0x01 /* Reset timer  */
+-	u8    res0[3];
+-	u8    cfr2; /* Timer3/4 Configuration  */
+-#define CFR2_PCAS 0x80 /* Pair Cascade mode  */
+-#define CFR2_SCAS 0x40 /* Super Cascade mode  */
+-#define CFR2_STP4 0x20 /* Stop timer  */
+-#define CFR2_RST4 0x10 /* Reset timer  */
+-#define CFR2_GM4  0x08 /* Gate mode for pin 4  */
+-#define CFR2_GM3  0x04 /* Gate mode for pin 3  */
+-#define CFR2_STP3 0x02 /* Stop timer  */
+-#define CFR2_RST3 0x01 /* Reset timer  */
+-	u8    res1[10];
+-	u16   mdr1; /* Timer1 Mode Register  */
+-#define MDR_SPS  0xff00 /* Secondary Prescaler value  */
+-#define MDR_CE   0x00c0 /* Capture edge and enable interrupt  */
+-#define MDR_OM   0x0020 /* Output mode  */
+-#define MDR_ORI  0x0010 /* Output reference interrupt enable  */
+-#define MDR_FRR  0x0008 /* Free run/restart  */
+-#define MDR_ICLK 0x0006 /* Input clock source for the timer  */
+-#define MDR_GE   0x0001 /* Gate enable  */
+-	u16   mdr2; /* Timer2 Mode Register  */
+-	u16   rfr1; /* Timer1 Reference Register  */
+-	u16   rfr2; /* Timer2 Reference Register  */
+-	u16   cpr1; /* Timer1 Capture Register  */
+-	u16   cpr2; /* Timer2 Capture Register  */
+-	u16   cnr1; /* Timer1 Counter Register  */
+-	u16   cnr2; /* Timer2 Counter Register  */
+-	u16   mdr3; /* Timer3 Mode Register  */
+-	u16   mdr4; /* Timer4 Mode Register  */
+-	u16   rfr3; /* Timer3 Reference Register  */
+-	u16   rfr4; /* Timer4 Reference Register  */
+-	u16   cpr3; /* Timer3 Capture Register  */
+-	u16   cpr4; /* Timer4 Capture Register  */
+-	u16   cnr3; /* Timer3 Counter Register  */
+-	u16   cnr4; /* Timer4 Counter Register  */
+-	u16   evr1; /* Timer1 Event Register  */
+-	u16   evr2; /* Timer2 Event Register  */
+-	u16   evr3; /* Timer3 Event Register  */
+-	u16   evr4; /* Timer4 Event Register  */
+-#define GTEVR_REF 0x0002 /* Output reference event  */
+-#define GTEVR_CAP 0x0001 /* Counter Capture event   */
++typedef struct gtm83xx {
++	u8 cfr1;		/* Timer1/2 Configuration  */
++#define CFR1_PCAS 0x80		/* Pair Cascade mode  */
++#define CFR1_BCM  0x40		/* Backward compatible mode  */
++#define CFR1_STP2 0x20		/* Stop timer  */
++#define CFR1_RST2 0x10		/* Reset timer	*/
++#define CFR1_GM2  0x08		/* Gate mode for pin 2	*/
++#define CFR1_GM1  0x04		/* Gate mode for pin 1	*/
++#define CFR1_STP1 0x02		/* Stop timer  */
++#define CFR1_RST1 0x01		/* Reset timer	*/
++#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\
++		 CFR1_GM1 | CFR1_STP1 | CFR1_RST1)
++	u8 res0[3];
++	u8 cfr2;		/* Timer3/4 Configuration  */
++#define CFR2_PCAS 0x80		/* Pair Cascade mode  */
++#define CFR2_SCAS 0x40		/* Super Cascade mode  */
++#define CFR2_STP4 0x20		/* Stop timer  */
++#define CFR2_RST4 0x10		/* Reset timer	*/
++#define CFR2_GM4  0x08		/* Gate mode for pin 4	*/
++#define CFR2_GM3  0x04		/* Gate mode for pin 3	*/
++#define CFR2_STP3 0x02		/* Stop timer  */
++#define CFR2_RST3 0x01		/* Reset timer	*/
++	u8 res1[10];
++	u16 mdr1;		/* Timer1 Mode Register	 */
++#define MDR_SPS	 0xff00		/* Secondary Prescaler value  */
++#define MDR_CE	 0x00c0		/* Capture edge and enable interrupt  */
++#define MDR_OM	 0x0020		/* Output mode	*/
++#define MDR_ORI	 0x0010		/* Output reference interrupt enable  */
++#define MDR_FRR	 0x0008		/* Free run/restart  */
++#define MDR_ICLK 0x0006		/* Input clock source for the timer  */
++#define MDR_GE	 0x0001		/* Gate enable	*/
++	u16 mdr2;		/* Timer2 Mode Register	 */
++	u16 rfr1;		/* Timer1 Reference Register  */
++	u16 rfr2;		/* Timer2 Reference Register  */
++	u16 cpr1;		/* Timer1 Capture Register  */
++	u16 cpr2;		/* Timer2 Capture Register  */
++	u16 cnr1;		/* Timer1 Counter Register  */
++	u16 cnr2;		/* Timer2 Counter Register  */
++	u16 mdr3;		/* Timer3 Mode Register	 */
++	u16 mdr4;		/* Timer4 Mode Register	 */
++	u16 rfr3;		/* Timer3 Reference Register  */
++	u16 rfr4;		/* Timer4 Reference Register  */
++	u16 cpr3;		/* Timer3 Capture Register  */
++	u16 cpr4;		/* Timer4 Capture Register  */
++	u16 cnr3;		/* Timer3 Counter Register  */
++	u16 cnr4;		/* Timer4 Counter Register  */
++	u16 evr1;		/* Timer1 Event Register  */
++	u16 evr2;		/* Timer2 Event Register  */
++	u16 evr3;		/* Timer3 Event Register  */
++	u16 evr4;		/* Timer4 Event Register  */
++#define GTEVR_REF 0x0002	/* Output reference event  */
++#define GTEVR_CAP 0x0001	/* Counter Capture event   */
+ #define GTEVR_RES ~(EVR_CAP|EVR_REF)
+-	u16   psr1; /* Timer1 Prescaler Register  */
+-	u16   psr2; /* Timer2 Prescaler Register  */
+-	u16   psr3; /* Timer3 Prescaler Register  */
+-	u16   psr4; /* Timer4 Prescaler Register  */
+-	u8    res[0xC0];
+-} gtm8349_t;
++	u16 psr1;		/* Timer1 Prescaler Register  */
++	u16 psr2;		/* Timer2 Prescaler Register  */
++	u16 psr3;		/* Timer3 Prescaler Register  */
++	u16 psr4;		/* Timer4 Prescaler Register  */
++#define GTPSR_PPS  0x00FF	/* Primary Prescaler Bits. */
++#define GTPSR_RES  ~(GTPSR_PPS)
++	u8 res[0xC0];
++} gtm83xx_t;
+ 
+ /*
+  * Integrated Programmable Interrupt Controller
+  */
+-typedef struct ipic8349 {
+-	u32    sicfr; /*  System Global Interrupt Configuration Register (SICFR)  */
+-#define SICFR_HPI  0x7f000000 /*  Highest Priority Interrupt  */
+-#define SICFR_MPSB 0x00400000 /*  Mixed interrupts Priority Scheme for group B  */
+-#define SICFR_MPSA 0x00200000 /*  Mixed interrupts Priority Scheme for group A  */
+-#define SICFR_IPSD 0x00080000 /*  Internal interrupts Priority Scheme for group D  */
+-#define SICFR_IPSA 0x00010000 /*  Internal interrupts Priority Scheme for group A  */
+-#define SICFR_HPIT 0x00000300 /*  HPI priority position IPIC output interrupt Type  */
++typedef struct ipic83xx {
++	u32 sicfr;		/*  System Global Interrupt Configuration Register (SICFR)  */
++#define SICFR_HPI  0x7f000000	/*  Highest Priority Interrupt	*/
++#define SICFR_MPSB 0x00400000	/*  Mixed interrupts Priority Scheme for group B  */
++#define SICFR_MPSA 0x00200000	/*  Mixed interrupts Priority Scheme for group A  */
++#define SICFR_IPSD 0x00080000	/*  Internal interrupts Priority Scheme for group D  */
++#define SICFR_IPSA 0x00010000	/*  Internal interrupts Priority Scheme for group A  */
++#define SICFR_HPIT 0x00000300	/*  HPI priority position IPIC output interrupt Type  */
+ #define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
+-	u32    sivcr; /*  System Global Interrupt Vector Register (SIVCR)  */
+-#define SICVR_IVECX 0xfc000000 /*  Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation)  */
+-#define SICVR_IVEC  0x0000007f /*  Interrupt vector  */
++	u32 sivcr;		/*  System Global Interrupt Vector Register (SIVCR)  */
++#define SICVR_IVECX 0xfc000000	/*  Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation)  */
++#define SICVR_IVEC  0x0000007f	/*  Interrupt vector  */
+ #define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
+-	u32    sipnr_h; /*  System Internal Interrupt Pending Register - High (SIPNR_H)  */
+-#define SIIH_TSEC1TX 0x80000000 /*  TSEC1 Tx interrupt  */
+-#define SIIH_TSEC1RX 0x40000000 /*  TSEC1 Rx interrupt  */
++	u32 sipnr_h;		/*  System Internal Interrupt Pending Register - High (SIPNR_H)	 */
++#if defined (CONFIG_MPC8349)
++#define SIIH_TSEC1TX 0x80000000 /*  TSEC1 Tx interrupt	*/
++#define SIIH_TSEC1RX 0x40000000 /*  TSEC1 Rx interrupt	*/
+ #define SIIH_TSEC1ER 0x20000000 /*  TSEC1 Eror interrupt  */
+-#define SIIH_TSEC2TX 0x10000000 /*  TSEC2 Tx interrupt  */
+-#define SIIH_TSEC2RX 0x08000000 /*  TSEC2 Rx interrupt  */
++#define SIIH_TSEC2TX 0x10000000 /*  TSEC2 Tx interrupt	*/
++#define SIIH_TSEC2RX 0x08000000 /*  TSEC2 Rx interrupt	*/
+ #define SIIH_TSEC2ER 0x04000000 /*  TSEC2 Eror interrupt  */
+ #define SIIH_USB2DR  0x02000000 /*  USB2 DR interrupt  */
+-#define SIIH_USB2MPH 0x01000000 /*  USB2 MPH interrupt  */
++#define SIIH_USB2MPH 0x01000000 /*  USB2 MPH interrupt	*/
++#endif
++#if defined (CONFIG_MPC8360)
++#define SIIH_H_QE_H   0x80000000	/*  QE high interrupt */
++#define SIIH_H_QE_L   0x40000000	/*  QE low interrupt */
++#endif
+ #define SIIH_UART1   0x00000080 /*  UART1 interrupt  */
+ #define SIIH_UART2   0x00000040 /*  UART2 interrupt  */
+ #define SIIH_SEC     0x00000020 /*  SEC interrupt  */
+ #define SIIH_I2C1    0x00000004 /*  I2C1 interrupt  */
+-#define SIIH_I2C2    0x00000002 /*  I2C1 interrupt  */
++#define SIIH_I2C2    0x00000002 /*  I2C2 interrupt  */
++#if defined (CONFIG_MPC8349)
+ #define SIIH_SPI     0x00000001 /*  SPI interrupt  */
+ #define SIIH_RES	~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \
+ 			| SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \
+ 			| SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \
+ 			| SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \
+ 			| SIIH_I2C2 | SIIH_SPI)
+-	u32    sipnr_l; /*  System Internal Interrupt Pending Register - Low (SIPNR_L)  */
+-#define SIIL_RTCS  0x80000000 /*  RTC SECOND interrupt  */
+-#define SIIL_PIT   0x40000000 /*  PIT interrupt  */
+-#define SIIL_PCI1  0x20000000 /*  PCI1 interrupt  */
+-#define SIIL_PCI2  0x10000000 /*  PCI2 interrupt  */
+-#define SIIL_RTCA  0x08000000 /*  RTC ALARM interrupt  */
+-#define SIIL_MU    0x04000000 /*  Message Unit interrupt  */
+-#define SIIL_SBA   0x02000000 /*  System Bus Arbiter interrupt  */
+-#define SIIL_DMA   0x01000000 /*  DMA interrupt  */
+-#define SIIL_GTM4  0x00800000 /*  GTM4 interrupt  */
+-#define SIIL_GTM8  0x00400000 /*  GTM8 interrupt  */
+-#define SIIL_GPIO1 0x00200000 /*  GPIO1 interrupt  */
+-#define SIIL_GPIO2 0x00100000 /*  GPIO2 interrupt  */
+-#define SIIL_DDR   0x00080000 /*  DDR interrupt  */
+-#define SIIL_LBC   0x00040000 /*  LBC interrupt  */
+-#define SIIL_GTM2  0x00020000 /*  GTM2 interrupt  */
+-#define SIIL_GTM6  0x00010000 /*  GTM6 interrupt  */
+-#define SIIL_PMC   0x00008000 /*  PMC interrupt  */
+-#define SIIL_GTM3  0x00000800 /*  GTM3 interrupt  */
+-#define SIIL_GTM7  0x00000400 /*  GTM7 interrupt  */
+-#define SIIL_GTM1  0x00000020 /*  GTM1 interrupt  */
+-#define SIIL_GTM5  0x00000010 /*  GTM5 interrupt  */
+-#define SIIL_DPTC  0x00000001 /*  DPTC interrupt (!!! Invisible for user !!!)  */
++#endif
++#if defined (CONFIG_MPC8360)
++#define SIIH_RES       ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \
++			SIIH_H_UART2| SIIH_H_SEC  | SIIH_H_I2C1 |SIIH_H_I2C2)
++#endif
++	u32 sipnr_l;		/*  System Internal Interrupt Pending Register - Low (SIPNR_L)	*/
++#define SIIL_RTCS  0x80000000	/*  RTC SECOND interrupt  */
++#define SIIL_PIT   0x40000000	/*  PIT interrupt  */
++#define SIIL_PCI1  0x20000000	/*  PCI1 interrupt  */
++#if defined (CONFIG_MPC8349)
++#define SIIL_PCI2  0x10000000	/*  PCI2 interrupt  */
++#endif
++#define SIIL_RTCA  0x08000000	/*  RTC ALARM interrupt	 */
++#define SIIL_MU	   0x04000000	/*  Message Unit interrupt  */
++#define SIIL_SBA   0x02000000	/*  System Bus Arbiter interrupt  */
++#define SIIL_DMA   0x01000000	/*  DMA interrupt  */
++#define SIIL_GTM4  0x00800000	/*  GTM4 interrupt  */
++#define SIIL_GTM8  0x00400000	/*  GTM8 interrupt  */
++#if defined (CONFIG_MPC8349)
++#define SIIL_GPIO1 0x00200000	/*  GPIO1 interrupt  */
++#define SIIL_GPIO2 0x00100000	/*  GPIO2 interrupt  */
++#endif
++#if defined (CONFIG_MPC8360)
++#define SIIL_QEP   0x00200000	/*  QE ports interrupt	*/
++#define SIIL_SDDR  0x00100000	/*  SDDR interrupt  */
++#endif
++#define SIIL_DDR   0x00080000	/*  DDR interrupt  */
++#define SIIL_LBC   0x00040000	/*  LBC interrupt  */
++#define SIIL_GTM2  0x00020000	/*  GTM2 interrupt  */
++#define SIIL_GTM6  0x00010000	/*  GTM6 interrupt  */
++#define SIIL_PMC   0x00008000	/*  PMC interrupt  */
++#define SIIL_GTM3  0x00000800	/*  GTM3 interrupt  */
++#define SIIL_GTM7  0x00000400	/*  GTM7 interrupt  */
++#define SIIL_GTM1  0x00000020	/*  GTM1 interrupt  */
++#define SIIL_GTM5  0x00000010	/*  GTM5 interrupt  */
++#define SIIL_DPTC  0x00000001	/*  DPTC interrupt (!!! Invisible for user !!!)	 */
++#if defined (CONFIG_MPC8349)
+ #define SIIL_RES	~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \
+ 			| SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \
+ 			| SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \
+ 			| SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \
+ 			| SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \
+ 			| SIIL_GTM5 |SIIL_DPTC )
+-	u32    siprr_a; /*  System Internal Interrupt Group A Priority Register (PRR)  */
+-	u8     res0[8];
+-	u32    siprr_d; /*  System Internal Interrupt Group D Priority Register (PRR)  */
+-	u32    simsr_h; /*  System Internal Interrupt Mask Register - High (SIIH)  */
+-	u32    simsr_l; /*  System Internal Interrupt Mask Register - Low (SIIL)  */
+-	u8     res1[4];
+-	u32    sepnr;   /*  System External Interrupt Pending Register (SEI)  */
+-	u32    smprr_a; /*  System Mixed Interrupt Group A Priority Register (PRR)  */
+-	u32    smprr_b; /*  System Mixed Interrupt Group B Priority Register (PRR)  */
+-#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
+-#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
+-#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
+-#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */
+-#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */
+-#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */
+-#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
+-#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
++#endif
++#if defined (CONFIG_MPC8360)
++#define SIIL_RES	~(SIIL_RTCS  |SIIL_PIT	|SIIL_PCI1 |SIIL_RTCALR \
++			|SIIL_MU |SIIL_SBA  |SIIL_DMA  |SIIL_GTM4 |SIIL_GTM8 \
++			|SIIL_QEP | SIIL_SDDR| SIIL_DDR	 |SIIL_LBC  |SIIL_GTM2 \
++			|SIIL_GTM6 |SIIL_PMC  |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \
++			|SIIL_GTM5 )
++#endif
++	u32 siprr_a;		/*  System Internal Interrupt Group A Priority Register (PRR)  */
++	u8 res0[8];
++	u32 siprr_d;		/*  System Internal Interrupt Group D Priority Register (PRR)  */
++	u32 simsr_h;		/*  System Internal Interrupt Mask Register - High (SIIH)  */
++	u32 simsr_l;		/*  System Internal Interrupt Mask Register - Low (SIIL)  */
++	u8 res1[4];
++	u32 sepnr;		/*  System External Interrupt Pending Register (SEI)  */
++	u32 smprr_a;		/*  System Mixed Interrupt Group A Priority Register (PRR)  */
++	u32 smprr_b;		/*  System Mixed Interrupt Group B Priority Register (PRR)  */
++#define PRR_0 0xe0000000	/* Priority Register, Position 0 programming */
++#define PRR_1 0x1c000000	/* Priority Register, Position 1 programming */
++#define PRR_2 0x03800000	/* Priority Register, Position 2 programming */
++#define PRR_3 0x00700000	/* Priority Register, Position 3 programming */
++#define PRR_4 0x0000e000	/* Priority Register, Position 4 programming */
++#define PRR_5 0x00001c00	/* Priority Register, Position 5 programming */
++#define PRR_6 0x00000380	/* Priority Register, Position 6 programming */
++#define PRR_7 0x00000070	/* Priority Register, Position 7 programming */
+ #define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
+-	u32    semsr; /*  System External Interrupt Mask Register (SEI)  */
+-#define SEI_IRQ0  0x80000000 /*  IRQ0 external interrupt  */
+-#define SEI_IRQ1  0x40000000 /*  IRQ1 external interrupt  */
+-#define SEI_IRQ2  0x20000000 /*  IRQ2 external interrupt  */
+-#define SEI_IRQ3  0x10000000 /*  IRQ3 external interrupt  */
+-#define SEI_IRQ4  0x08000000 /*  IRQ4 external interrupt  */
+-#define SEI_IRQ5  0x04000000 /*  IRQ5 external interrupt  */
+-#define SEI_IRQ6  0x02000000 /*  IRQ6 external interrupt  */
+-#define SEI_IRQ7  0x01000000 /*  IRQ7 external interrupt  */
+-#define SEI_SIRQ0 0x00008000 /*  SIRQ0 external interrupt  */
++	u32 semsr;		/*  System External Interrupt Mask Register (SEI)  */
++#define SEI_IRQ0  0x80000000	/*  IRQ0 external interrupt  */
++#define SEI_IRQ1  0x40000000	/*  IRQ1 external interrupt  */
++#define SEI_IRQ2  0x20000000	/*  IRQ2 external interrupt  */
++#define SEI_IRQ3  0x10000000	/*  IRQ3 external interrupt  */
++#define SEI_IRQ4  0x08000000	/*  IRQ4 external interrupt  */
++#define SEI_IRQ5  0x04000000	/*  IRQ5 external interrupt  */
++#define SEI_IRQ6  0x02000000	/*  IRQ6 external interrupt  */
++#define SEI_IRQ7  0x01000000	/*  IRQ7 external interrupt  */
++#define SEI_SIRQ0 0x00008000	/*  SIRQ0 external interrupt  */
+ #define SEI_RES		~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \
+ 			| SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \
+ 			| SEI_SIRQ0)
+-	u32    secnr; /*  System External Interrupt Control Register (SECNR) */
+-#define SECNR_MIXB0T 0xc0000000 /*  MIXB0 priority position IPIC output interrupt type  */
+-#define SECNR_MIXB1T 0x30000000 /*  MIXB1 priority position IPIC output interrupt type  */
+-#define SECNR_MIXA0T 0x00c00000 /*  MIXA0 priority position IPIC output interrupt type  */
+-#define SECNR_SYSA1T 0x00300000 /*  MIXA1 priority position IPIC output interrupt type  */
++	u32 secnr;		/*  System External Interrupt Control Register (SECNR) */
++#define SECNR_MIXB0T 0xc0000000 /*  MIXB0 priority position IPIC output interrupt type	*/
++#define SECNR_MIXB1T 0x30000000 /*  MIXB1 priority position IPIC output interrupt type	*/
++#define SECNR_MIXA0T 0x00c00000 /*  MIXA0 priority position IPIC output interrupt type	*/
++#define SECNR_SYSA1T 0x00300000 /*  MIXA1 priority position IPIC output interrupt type	*/
+ #define SECNR_EDI0   0x00008000 /*  IRQ0 external interrupt edge/level detect  */
+ #define SECNR_EDI1   0x00004000 /*  IRQ1 external interrupt edge/level detect  */
+ #define SECNR_EDI2   0x00002000 /*  IRQ2 external interrupt edge/level detect  */
+@@ -339,176 +439,238 @@ typedef struct ipic8349 {
+ 			| SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \
+ 			| SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \
+ 			| SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7)
+-	u32   sersr; /*  System Error Status Register (SERR)  */
+-	u32   sermr; /*  System Error Mask Register (SERR)  */
+-#define SERR_IRQ0 0x80000000 /*  IRQ0 MCP request  */
+-#define SERR_WDT  0x40000000 /*  WDT MCP request  */
+-#define SERR_SBA  0x20000000 /*  SBA MCP request  */
+-#define SERR_DDR  0x10000000 /*  DDR MCP request  */
+-#define SERR_LBC  0x08000000 /*  LBC MCP request  */
+-#define SERR_PCI1 0x04000000 /*  PCI1 MCP request  */
+-#define SERR_PCI2 0x02000000 /*  PCI2 MCP request  */
+-#define SERR_MU   0x01000000 /*  MU MCP request  */
+-#define SERR_RNC  0x00010000 /*  MU MCP request (!!! Non-visible for users !!!)  */
++	u32 sersr;		/*  System Error Status Register (SERR)	 */
++	u32 sermr;		/*  System Error Mask Register (SERR)  */
++#define SERR_IRQ0 0x80000000	/*  IRQ0 MCP request  */
++#define SERR_WDT  0x40000000	/*  WDT MCP request  */
++#define SERR_SBA  0x20000000	/*  SBA MCP request  */
++#if defined (CONFIG_MPC8349)
++#define SERR_DDR  0x10000000	/*  DDR MCP request  */
++#define SERR_LBC  0x08000000	/*  LBC MCP request  */
++#define SERR_PCI1 0x04000000	/*  PCI1 MCP request  */
++#define SERR_PCI2 0x02000000	/*  PCI2 MCP request  */
++#endif
++#if defined (CONFIG_MPC8360)
++#define SERR_CIEE 0x10000000	/*  CIEE MCP request  */
++#define SERR_CMEE 0x08000000	/*  CMEEMCP request  */
++#define SERR_PCI  0x04000000	/*  PCI MCP request  */
++#endif
++#define SERR_MU	  0x01000000	/*  MU MCP request  */
++#define SERR_RNC  0x00010000	/*  MU MCP request (!!! Non-visible for users !!!)  */
++#if defined (CONFIG_MPC8349)
+ #define SERR_RES	~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \
+ 			|SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \
+ 			|SERR_RNC )
+-	u32    sercr; /*  System Error Control Register  (SERCR)  */
+-#define SERCR_MCPR 0x00000001 /*  MCP Route  */
++#elif defined (CONFIG_MPC8360)
++#define SERR_RES	~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\
++			|SERR_CMEE|SERR_PCI|SERR_MU)
++#endif
++	u32 sercr;		/*  System Error Control Register  (SERCR)  */
++#define SERCR_MCPR 0x00000001	/*  MCP Route  */
+ #define SERCR_RES ~(SERCR_MCPR)
+-	u8    res2[4];
+-	u32   sifcr_h; /*  System Internal Interrupt Force Register - High (SIIH)  */
+-	u32   sifcr_l; /*  System Internal Interrupt Force Register - Low (SIIL)  */
+-	u32   sefcr;   /*  System External Interrupt Force Register (SEI)  */
+-	u32   serfr;   /*  System Error Force Register (SERR)  */
+-	u8    res3[0xA0];
+-} ipic8349_t;
++	u8 res2[4];
++	u32 sifcr_h;		/*  System Internal Interrupt Force Register - High (SIIH)  */
++	u32 sifcr_l;		/*  System Internal Interrupt Force Register - Low (SIIL)  */
++	u32 sefcr;		/*  System External Interrupt Force Register (SEI)  */
++	u32 serfr;		/*  System Error Force Register (SERR)	*/
++	u32 scvcr;		/* System Critical Interrupt Vector Register */
++#define SCVCR_CVECX	0xFC000000	/* Backward (MPC8260) compatible
++					   critical interrupt vector. */
++#define SCVCR_CVEC	0x0000007F	/* Critical interrupt vector */
++#define SCVCR_RES	~(SCVCR_CVECX|SCVCR_CVEC)
++	u32 smvcr;		/* System Management Interrupt Vector Register */
++#define SMVCR_CVECX	0xFC000000	/* Backward (MPC8260) compatible
++					   critical interrupt vector. */
++#define SMVCR_CVEC	0x0000007F	/* Critical interrupt vector */
++#define SMVCR_RES	~(SMVCR_CVECX|SMVCR_CVEC)
++	u8 res3[0x98];
++} ipic83xx_t;
+ 
+ /*
+  * System Arbiter Registers
+  */
+-typedef struct arbiter8349 {
+-	u32 acr; /* Arbiter Configuration Register */
+-#define ACR_COREDIS    0x10000000 /* Core disable. */
+-#define ACR_PIPE_DEP   0x00070000 /* Pipeline depth (number of outstanding transactions). */
+-#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
+-#define ACR_RPTCNT     0x00000700 /* Repeat count. */
+-#define ACR_APARK      0x00000030 /* Address parking. */
+-#define ACR_PARKM	   0x0000000F /* Parking master. */
++typedef struct arbiter83xx {
++	u32 acr;		/* Arbiter Configuration Register */
++#define ACR_COREDIS    0x10000000	/* Core disable. */
++#define ACR_COREDIS_SHIFT		(31-7)
++#define ACR_PIPE_DEP   0x00070000	/* Pipeline depth (number of outstanding transactions). */
++#define ACR_PIPE_DEP_SHIFT		(31-15)
++#define ACR_PCI_RPTCNT 0x00007000	/* PCI repeat count. */
++#define ACR_PCI_RPTCNT_SHIFT		(31-19)
++#define ACR_RPTCNT     0x00000700	/* Repeat count. */
++#define ACR_RPTCNT_SHIFT		(31-23)
++#define ACR_APARK      0x00000030	/* Address parking. */
++#define ACR_APARK_SHIFT			(31-27)
++#define ACR_PARKM	   0x0000000F	/* Parking master. */
++#define ACR_PARKM_SHIFT			(31-31)
+ #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
+-	u32 atr; /* Arbiter Timers Register */
+-#define ATR_DTO 0x00FF0000 /* Data time out. */
+-#define ATR_ATO	0x000000FF /* Address time out. */
++	u32 atr;		/* Arbiter Timers Register */
++#define ATR_DTO 0x00FF0000	/* Data time out. */
++#define ATR_ATO 0x000000FF	/* Address time out. */
+ #define ATR_RES ~(ATR_DTO|ATR_ATO)
+ 	u8 res[4];
+-	u32 aer; /* Arbiter Event Register (AE)*/
+-	u32 aidr; /* Arbiter Interrupt Definition Register (AE) */
+-	u32 amr; /* Arbiter Mask Register (AE) */
+-	u32 aeatr; /* Arbiter Event Attributes Register */
+-#define AEATR_EVENT   0x07000000 /* Event type. */
+-#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */
+-#define AEATR_TBST    0x00000800 /* Transfer burst. */
+-#define AEATR_TSIZE   0x00000700 /* Transfer Size. */
+-#define AEATR_TTYPE	  0x0000001F /* Transfer Type. */
++	u32 aer;		/* Arbiter Event Register (AE) */
++	u32 aidr;		/* Arbiter Interrupt Definition Register (AE) */
++	u32 amr;		/* Arbiter Mask Register (AE) */
++	u32 aeatr;		/* Arbiter Event Attributes Register */
++#define AEATR_EVENT   0x07000000	/* Event type. */
++#define AEATR_MSTR_ID 0x001F0000	/* Master Id. */
++#define AEATR_TBST    0x00000800	/* Transfer burst. */
++#define AEATR_TSIZE   0x00000700	/* Transfer Size. */
++#define AEATR_TTYPE	  0x0000001F	/* Transfer Type. */
+ #define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE)
+-	u32 aeadr; /* Arbiter Event Address Register */
+-	u32 aerr; /* Arbiter Event Response Register (AE)*/
+-#define AE_ETEA 0x00000020 /* Transfer error. */
+-#define AE_RES_ 0x00000010 /* Reserved transfer type. */
+-#define AE_ECW  0x00000008 /* External control word transfer type. */
+-#define AE_AO   0x00000004 /* Address Only transfer type. */
+-#define AE_DTO  0x00000002 /* Data time out. */
+-#define AE_ATO	0x00000001 /* Address time out. */
++	u32 aeadr;		/* Arbiter Event Address Register */
++	u32 aerr;		/* Arbiter Event Response Register (AE) */
++#define AE_ETEA 0x00000020	/* Transfer error. */
++#define AE_RES_ 0x00000010	/* Reserved transfer type. */
++#define AE_ECW	0x00000008	/* External control word transfer type. */
++#define AE_AO	0x00000004	/* Address Only transfer type. */
++#define AE_DTO	0x00000002	/* Data time out. */
++#define AE_ATO	0x00000001	/* Address time out. */
+ #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO)
+ 	u8 res1[0xDC];
+-} arbiter8349_t;
++} arbiter83xx_t;
+ 
+ /*
+  * Reset Module
+  */
+-typedef struct reset8349 {
+-	u32    rcwl; /* RCWL Register  */
++typedef struct reset83xx {
++	u32 rcwl;		/* RCWL Register  */
+ #define RCWL_LBIUCM  0x80000000 /* LBIUCM  */
+ #define RCWL_LBIUCM_SHIFT    31
+ #define RCWL_DDRCM   0x40000000 /* DDRCM  */
+ #define RCWL_DDRCM_SHIFT     30
++#if defined (CONFIG_MPC8349)
+ #define RCWL_SVCOD   0x30000000 /* SVCOD  */
+-#define RCWL_SPMF    0x0f000000 /* SPMF  */
+-#define RCWL_SPMF_SHIFT      24
++#endif
++#define RCWL_SPMF    0x0f000000 /* SPMF	 */
++#define RCWL_SPMF_SHIFT	     24
+ #define RCWL_COREPLL 0x007F0000 /* COREPLL  */
+ #define RCWL_COREPLL_SHIFT   16
+ #define RCWL_CEVCOD  0x000000C0 /* CEVCOD  */
+ #define RCWL_CEPDF   0x00000020 /* CEPDF  */
++#define RCWL_CEPDF_SHIFT      5
+ #define RCWL_CEPMF   0x0000001F /* CEPMF  */
+-#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+-	u32    rcwh; /* RCHL Register  */
++#define RCWL_CEPMF_SHIFT      0
++#if defined (CONFIG_MPC8349)
++#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
++#elif defined (CONFIG_MPC8360)
++#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF)
++#endif
++	u32 rcwh;		/* RCHL Register  */
+ #define RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+ #define RCWH_PCIHOST_SHIFT   31
++#if defined (CONFIG_MPC8349)
+ #define RCWH_PCI64   0x40000000 /* PCI64  */
+ #define RCWH_PCI1ARB 0x20000000 /* PCI1ARB  */
+ #define RCWH_PCI2ARB 0x10000000 /* PCI2ARB  */
++#elif defined (CONFIG_MPC8360)
++#define RCWH_PCIARB   0x20000000	/* PCI internal arbiter mode. */
++#define RCWH_PCICKDRV 0x10000000	/* PCI clock output drive. */
++#endif
+ #define RCWH_COREDIS 0x08000000 /* COREDIS  */
+-#define RCWH_BMS     0x04000000 /* BMS  */
++#define RCWH_BMS     0x04000000 /* BMS	*/
+ #define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ  */
+-#define RCWH_SWEN    0x00800000 /* SWEN  */
++#define RCWH_SWEN    0x00800000 /* SWEN	 */
+ #define RCWH_ROMLOC  0x00700000 /* ROMLOC  */
++#if defined (CONFIG_MPC8349)
+ #define RCWH_TSEC1M  0x0000c000 /* TSEC1M  */
+ #define RCWH_TSEC2M  0x00003000 /* TSEC2M  */
+-#define RCWH_TPR     0x00000100 /* TPR  */
+-#define RCWH_TLE     0x00000008 /* TLE  */
+-#define RCWH_LALE    0x00000004 /* LALE  */
++#define RCWH_TPR     0x00000100 /* TPR	*/
++#elif defined (CONFIG_MPC8360)
++#define RCWH_SDDRIOE  0x00000010	/* Secondary DDR IO Enable.  */
++#endif
++#define RCWH_TLE     0x00000008 /* TLE	*/
++#define RCWH_LALE    0x00000004 /* LALE	 */
++#if defined (CONFIG_MPC8349)
+ #define RCWH_RES	~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \
+ 			| RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \
+ 			| RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \
+ 			| RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \
+ 			| RCWH_TLE | RCWH_LALE)
+-	u8     res0[8];
+-	u32    rsr; /* Reset status Register  */
+-#define RSR_RSTSRC 0xE0000000 /* Reset source  */
++#elif defined (CONFIG_MPC8360)
++#define RCWH_RES	~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \
++			|RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \
++			|RCWH_SDDRIOE |RCWH_TLE)
++#endif
++	u8 res0[8];
++	u32 rsr;		/* Reset status Register  */
++#define RSR_RSTSRC 0xE0000000	/* Reset source	 */
+ #define RSR_RSTSRC_SHIFT   29
+-#define RSR_BSF    0x00010000 /* Boot seq. fail  */
+-#define RSR_BSF_SHIFT      16
+-#define RSR_SWSR   0x00002000 /* software soft reset  */
+-#define RSR_SWSR_SHIFT     13
+-#define RSR_SWHR   0x00001000 /* software hard reset  */
+-#define RSR_SWHR_SHIFT     12
+-#define RSR_JHRS   0x00000200 /* jtag hreset  */
+-#define RSR_JHRS_SHIFT      9
+-#define RSR_JSRS   0x00000100 /* jtag sreset status  */
+-#define RSR_JSRS_SHIFT      8
+-#define RSR_CSHR   0x00000010 /* checkstop reset status  */
+-#define RSR_CSHR_SHIFT      4
+-#define RSR_SWRS   0x00000008 /* software watchdog reset status  */
+-#define RSR_SWRS_SHIFT      3
+-#define RSR_BMRS   0x00000004 /* bus monitop reset status  */
+-#define RSR_BMRS_SHIFT      2
+-#define RSR_SRS    0x00000002 /* soft reset status  */
+-#define RSR_SRS_SHIFT       1
+-#define RSR_HRS    0x00000001 /* hard reset status  */
+-#define RSR_HRS_SHIFT       0
++#define RSR_BSF	   0x00010000	/* Boot seq. fail  */
++#define RSR_BSF_SHIFT	   16
++#define RSR_SWSR   0x00002000	/* software soft reset	*/
++#define RSR_SWSR_SHIFT	   13
++#define RSR_SWHR   0x00001000	/* software hard reset	*/
++#define RSR_SWHR_SHIFT	   12
++#define RSR_JHRS   0x00000200	/* jtag hreset	*/
++#define RSR_JHRS_SHIFT	    9
++#define RSR_JSRS   0x00000100	/* jtag sreset status  */
++#define RSR_JSRS_SHIFT	    8
++#define RSR_CSHR   0x00000010	/* checkstop reset status  */
++#define RSR_CSHR_SHIFT	    4
++#define RSR_SWRS   0x00000008	/* software watchdog reset status  */
++#define RSR_SWRS_SHIFT	    3
++#define RSR_BMRS   0x00000004	/* bus monitop reset status  */
++#define RSR_BMRS_SHIFT	    2
++#define RSR_SRS	   0x00000002	/* soft reset status  */
++#define RSR_SRS_SHIFT	    1
++#define RSR_HRS	   0x00000001	/* hard reset status  */
++#define RSR_HRS_SHIFT	    0
+ #define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS)
+-	u32    rmr; /* Reset mode Register  */
+-#define RMR_CSRE   0x00000001 /* checkstop reset enable  */
+-#define RMR_CSRE_SHIFT      0
++	u32 rmr;		/* Reset mode Register	*/
++#define RMR_CSRE   0x00000001	/* checkstop reset enable  */
++#define RMR_CSRE_SHIFT	    0
+ #define RMR_RES ~(RMR_CSRE)
+-	u32    rpr; /* Reset protection Register  */
+-	u32    rcr; /* Reset Control Register  */
+-#define RCR_SWHR 0x00000002 /* software hard reset  */
+-#define RCR_SWSR 0x00000001 /* software soft reset  */
++	u32 rpr;		/* Reset protection Register  */
++	u32 rcr;		/* Reset Control Register  */
++#define RCR_SWHR 0x00000002	/* software hard reset	*/
++#define RCR_SWSR 0x00000001	/* software soft reset	*/
+ #define RCR_RES ~(RCR_SWHR | RCR_SWSR)
+-	u32    rcer; /* Reset Control Enable Register  */
+-#define RCER_CRE 0x00000001 /* software hard reset  */
++	u32 rcer;		/* Reset Control Enable Register  */
++#define RCER_CRE 0x00000001	/* software hard reset	*/
+ #define RCER_RES ~(RCER_CRE)
+-	u8     res1[0xDC];
+-} reset8349_t;
++	u8 res1[0xDC];
++} reset83xx_t;
+ 
+-typedef struct clk8349 {
+-	u32    spmr; /* system PLL mode Register  */
++typedef struct clk83xx {
++	u32 spmr;		/* system PLL mode Register  */
+ #define SPMR_LBIUCM  0x80000000 /* LBIUCM  */
+ #define SPMR_DDRCM   0x40000000 /* DDRCM  */
++#if defined (CONFIG_MPC8349)
+ #define SPMR_SVCOD   0x30000000 /* SVCOD  */
+-#define SPMR_SPMF    0x0F000000 /* SPMF  */
+-#define SPMR_CKID    0x00800000 /* CKID  */
++#endif
++#define SPMR_SPMF    0x0F000000 /* SPMF	 */
++#define SPMR_CKID    0x00800000 /* CKID	 */
+ #define SPMR_CKID_SHIFT 23
+ #define SPMR_COREPLL 0x007F0000 /* COREPLL  */
+ #define SPMR_CEVCOD  0x000000C0 /* CEVCOD  */
+ #define SPMR_CEPDF   0x00000020 /* CEPDF  */
+ #define SPMR_CEPMF   0x0000001F /* CEPMF  */
++#if defined (CONFIG_MPC8349)
+ #define SPMR_RES	~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \
+ 			| SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \
+ 			| SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF)
+-	u32    occr; /* output clock control Register  */
++#elif defined (CONFIG_MPC8360)
++#define SPMR_RES	~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \
++			| SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \
++			| SPMR_CEPDF | SPMR_CEPMF)
++#endif
++	u32 occr;		/* output clock control Register  */
+ #define OCCR_PCICOE0 0x80000000 /* PCICOE0  */
+ #define OCCR_PCICOE1 0x40000000 /* PCICOE1  */
+ #define OCCR_PCICOE2 0x20000000 /* PCICOE2  */
++#if defined (CONFIG_MPC8349)
+ #define OCCR_PCICOE3 0x10000000 /* PCICOE3  */
+ #define OCCR_PCICOE4 0x08000000 /* PCICOE4  */
+ #define OCCR_PCICOE5 0x04000000 /* PCICOE5  */
+ #define OCCR_PCICOE6 0x02000000 /* PCICOE6  */
+ #define OCCR_PCICOE7 0x01000000 /* PCICOE7  */
++#endif
+ #define OCCR_PCICD0  0x00800000 /* PCICD0  */
+ #define OCCR_PCICD1  0x00400000 /* PCICD1  */
+ #define OCCR_PCICD2  0x00200000 /* PCICD2  */
++#if defined (CONFIG_MPC8349)
+ #define OCCR_PCICD3  0x00100000 /* PCICD3  */
+ #define OCCR_PCICD4  0x00080000 /* PCICD4  */
+ #define OCCR_PCICD5  0x00040000 /* PCICD5  */
+@@ -522,72 +684,253 @@ typedef struct clk8349 {
+ 			| OCCR_PCICD1 | OCCR_PCICD2  | OCCR_PCICD3 \
+ 			| OCCR_PCICD4  | OCCR_PCICD5 | OCCR_PCICD6  \
+ 			| OCCR_PCICD7  | OCCR_PCI1CR  | OCCR_PCI2CR )
+-	u32    sccr; /* system clock control Register  */
+-#define SCCR_TSEC1CM  0xc0000000 /* TSEC1CM  */
++#endif
++#if defined (CONFIG_MPC8360)
++#define OCCR_PCICR	0x00000002	/* PCI clock rate  */
++#define OCCR_RES	~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \
++			|OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR )
++#endif
++	u32 sccr;		/* system clock control Register  */
++#if defined (CONFIG_MPC8349)
++#define SCCR_TSEC1CM  0xc0000000	/* TSEC1CM  */
+ #define SCCR_TSEC1CM_SHIFT 30
+-#define SCCR_TSEC2CM  0x30000000 /* TSEC2CM  */
++#define SCCR_TSEC2CM  0x30000000	/* TSEC2CM  */
+ #define SCCR_TSEC2CM_SHIFT 28
+-#define SCCR_ENCCM    0x03000000 /* ENCCM  */
++#endif
++#define SCCR_ENCCM    0x03000000	/* ENCCM  */
+ #define SCCR_ENCCM_SHIFT 24
+-#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM  */
++#if defined (CONFIG_MPC8349)
++#define SCCR_USBMPHCM 0x00c00000	/* USBMPHCM  */
+ #define SCCR_USBMPHCM_SHIFT 22
+-#define SCCR_USBDRCM  0x00300000 /* USBDRCM  */
++#define SCCR_USBDRCM  0x00300000	/* USBDRCM  */
+ #define SCCR_USBDRCM_SHIFT 20
+-#define SCCR_PCICM    0x00010000 /* PCICM  */
++#endif
++#define SCCR_PCICM    0x00010000	/* PCICM  */
++#if defined (CONFIG_MPC8349)
+ #define SCCR_RES	~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \
+ 			| SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM)
+-	u8     res0[0xF4];
+-} clk8349_t;
++#endif
++#if defined (CONFIG_MPC8360)
++#define SCCR_RES	~(SCCR_ENCCM | SCCR_PCICM)
++#endif
++	u8 res0[0xF4];
++} clk83xx_t;
+ 
+ /*
+  * Power Management Control Module
+  */
+-typedef struct pmc8349 {
+-	u32    pmccr; /* PMC Configuration Register  */
+-#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable  */
+-#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable  */
+-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN)
+-	u32    pmcer; /* PMC Event Register  */
+-#define PMCER_PMCI  0x00000001 /* PMC Interrupt  */
++typedef struct pmc83xx {
++	u32 pmccr;		/* PMC Configuration Register  */
++#define PMCCR_SLPEN 0x00000001	/* System Low Power Enable  */
++#define PMCCR_DLPEN 0x00000002	/* DDR SDRAM Low Power Enable  */
++#if defined (CONFIG_MPC8360)
++#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable	 */
++#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN)
++#elif defined (CONFIG_MPC8349)
++#define PMCCR_RES    ~(PMCCR_SLPEN | PMCCR_DLPEN)
++#endif
++	u32 pmcer;		/* PMC Event Register  */
++#define PMCER_PMCI  0x00000001	/* PMC Interrupt  */
+ #define PMCER_RES ~(PMCER_PMCI)
+-	u32    pmcmr; /* PMC Mask Register  */
+-#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable  */
++	u32 pmcmr;		/* PMC Mask Register  */
++#define PMCMR_PMCIE 0x0001	/* PMC Interrupt Enable	 */
+ #define PMCMR_RES ~(PMCMR_PMCIE)
+ 	u8 res0[0xF4];
+-} pmc8349_t;
+-
++} pmc83xx_t;
+ 
++#if defined (CONFIG_MPC8349)
+ /*
+  * general purpose I/O module
+  */
+-typedef struct gpio8349 {
+-	u32 dir; /* direction register */
+-	u32 odr; /* open drain register */
+-	u32 dat; /* data register */
+-	u32 ier; /* interrupt event register */
+-	u32 imr; /* interrupt mask register */
+-	u32 icr; /* external interrupt control register */
++typedef struct gpio83xx {
++	u32 dir;		/* direction register */
++	u32 odr;		/* open drain register */
++	u32 dat;		/* data register */
++	u32 ier;		/* interrupt event register */
++	u32 imr;		/* interrupt mask register */
++	u32 icr;		/* external interrupt control register */
+ 	u8 res0[0xE8];
+-} gpio8349_t;
++} gpio83xx_t;
++#endif
++
++#if defined (CONFIG_MPC8360)
++/*
++ * QE Ports Interrupts Registers
++ */
++typedef struct qepi83xx {
++	u8 res0[0xC];
++	u32 qepier;		/* QE Ports Interrupt Event Register */
++#define QEPIER_PA15 0x80000000
++#define QEPIER_PA16 0x40000000
++#define QEPIER_PA29 0x20000000
++#define QEPIER_PA30 0x10000000
++#define QEPIER_PB3  0x08000000
++#define QEPIER_PB5  0x04000000
++#define QEPIER_PB12 0x02000000
++#define QEPIER_PB13 0x01000000
++#define QEPIER_PB26 0x00800000
++#define QEPIER_PB27 0x00400000
++#define QEPIER_PC27 0x00200000
++#define QEPIER_PC28 0x00100000
++#define QEPIER_PC29 0x00080000
++#define QEPIER_PD12 0x00040000
++#define QEPIER_PD13 0x00020000
++#define QEPIER_PD16 0x00010000
++#define QEPIER_PD17 0x00008000
++#define QEPIER_PD26 0x00004000
++#define QEPIER_PD27 0x00002000
++#define QEPIER_PE12 0x00001000
++#define QEPIER_PE13 0x00000800
++#define QEPIER_PE24 0x00000400
++#define QEPIER_PE25 0x00000200
++#define QEPIER_PE26 0x00000100
++#define QEPIER_PE27 0x00000080
++#define QEPIER_PE31 0x00000040
++#define QEPIER_PF20 0x00000020
++#define QEPIER_PG31 0x00000010
++#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \
++		   |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \
++		   |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \
++		   |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \
++		   |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \
++		   |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31)
++	u32 qepimr;		/* QE Ports Interrupt Mask Register */
++#define QEPIMR_PA15 0x80000000
++#define QEPIMR_PA16 0x40000000
++#define QEPIMR_PA29 0x20000000
++#define QEPIMR_PA30 0x10000000
++#define QEPIMR_PB3  0x08000000
++#define QEPIMR_PB5  0x04000000
++#define QEPIMR_PB12 0x02000000
++#define QEPIMR_PB13 0x01000000
++#define QEPIMR_PB26 0x00800000
++#define QEPIMR_PB27 0x00400000
++#define QEPIMR_PC27 0x00200000
++#define QEPIMR_PC28 0x00100000
++#define QEPIMR_PC29 0x00080000
++#define QEPIMR_PD12 0x00040000
++#define QEPIMR_PD13 0x00020000
++#define QEPIMR_PD16 0x00010000
++#define QEPIMR_PD17 0x00008000
++#define QEPIMR_PD26 0x00004000
++#define QEPIMR_PD27 0x00002000
++#define QEPIMR_PE12 0x00001000
++#define QEPIMR_PE13 0x00000800
++#define QEPIMR_PE24 0x00000400
++#define QEPIMR_PE25 0x00000200
++#define QEPIMR_PE26 0x00000100
++#define QEPIMR_PE27 0x00000080
++#define QEPIMR_PE31 0x00000040
++#define QEPIMR_PF20 0x00000020
++#define QEPIMR_PG31 0x00000010
++#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \
++		   |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \
++		   |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \
++		   |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \
++		   |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \
++		   |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31)
++	u32 qepicr;		/* QE Ports Interrupt Control Register */
++#define QEPICR_PA15 0x80000000
++#define QEPICR_PA16 0x40000000
++#define QEPICR_PA29 0x20000000
++#define QEPICR_PA30 0x10000000
++#define QEPICR_PB3  0x08000000
++#define QEPICR_PB5  0x04000000
++#define QEPICR_PB12 0x02000000
++#define QEPICR_PB13 0x01000000
++#define QEPICR_PB26 0x00800000
++#define QEPICR_PB27 0x00400000
++#define QEPICR_PC27 0x00200000
++#define QEPICR_PC28 0x00100000
++#define QEPICR_PC29 0x00080000
++#define QEPICR_PD12 0x00040000
++#define QEPICR_PD13 0x00020000
++#define QEPICR_PD16 0x00010000
++#define QEPICR_PD17 0x00008000
++#define QEPICR_PD26 0x00004000
++#define QEPICR_PD27 0x00002000
++#define QEPICR_PE12 0x00001000
++#define QEPICR_PE13 0x00000800
++#define QEPICR_PE24 0x00000400
++#define QEPICR_PE25 0x00000200
++#define QEPICR_PE26 0x00000100
++#define QEPICR_PE27 0x00000080
++#define QEPICR_PE31 0x00000040
++#define QEPICR_PF20 0x00000020
++#define QEPICR_PG31 0x00000010
++#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \
++		   |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \
++		   |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \
++		   |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \
++		   |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \
++		   |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31)
++	u8 res1[0xE8];
++} qepi83xx_t;
++
++/*
++ * general purpose I/O module
++ */
++typedef struct gpio_n {
++	u32 podr;		/* Open Drain Register */
++	u32 pdat;		/* Data Register */
++	u32 dir1;		/* direction register 1 */
++	u32 dir2;		/* direction register 2 */
++	u32 ppar1;		/* Pin Assignment Register 1 */
++	u32 ppar2;		/* Pin Assignment Register 2 */
++} gpio_n_t;
++
++typedef struct gpio83xx {
++	gpio_n_t ioport[0x7];
++	u8 res0[0x358];
++} gpio83xx_t;
++
++/*
++ * QE Secondary Bus Access Windows
++ */
++
++typedef struct qesba83xx {
++	u32 lbmcsar;		/* Local bus memory controller start address */
++#define LBMCSAR_SA	0x000FFFFF	/* 20 most-significant bits of the start address */
++#define LBMCSAR_RES	~(LBMCSAR_SA)
++	u32 sdmcsar;		/* Secondary DDR memory controller start address */
++#define SDMCSAR_SA	0x000FFFFF	/* 20 most-significant bits of the start address */
++#define SDMCSAR_RES	~(SDMCSAR_SA)
++	u8 res0[0x38];
++	u32 lbmcear;		/* Local bus memory controller end address */
++#define LBMCEAR_EA	0x000FFFFF	/* 20 most-significant bits of the end address */
++#define LBMCEAR_RES	~(LBMCEAR_EA)
++	u32 sdmcear;		/* Secondary DDR memory controller end address */
++#define SDMCEAR_EA	0x000FFFFF	/* 20 most-significant bits of the end address */
++#define SDMCEAR_RES	~(SDMCEAR_EA)
++	u8 res1[0x38];
++	u32 lbmcar;		/* Local bus memory controller attributes  */
++#define LBMCAR_WEN	0x00000001	/* Forward transactions to the QE local bus */
++#define LBMCAR_RES	~(LBMCAR_WEN)
++	u32 sdmcar;		/* Secondary DDR memory controller attributes */
++#define SDMCAR_WEN	0x00000001	/* Forward transactions to the second DDR bus */
++#define SDMCAR_RES	~(SDMCAR_WEN)
++	u8 res2[0x778];
++} qesba83xx_t;
++#endif
+ 
+ /*
+  * DDR Memory Controller Memory Map
+  */
+-typedef struct ddr_cs_bnds{
++typedef struct ddr_cs_bnds {
+ 	u32 csbnds;
+ #define CSBNDS_SA 0x00FF0000
+-#define CSBNDS_SA_SHIFT    8
++#define CSBNDS_SA_SHIFT	   8
+ #define CSBNDS_EA 0x000000FF
+-#define CSBNDS_EA_SHIFT   24
+-	u8  res0[4];
++#define CSBNDS_EA_SHIFT	  24
++	u8 res0[4];
+ } ddr_cs_bnds_t;
+ 
+-typedef struct ddr8349{
+-	ddr_cs_bnds_t csbnds[4];            /**< Chip Select x Memory Bounds */
++typedef struct ddr83xx {
++	ddr_cs_bnds_t csbnds[4];	    /**< Chip Select x Memory Bounds */
+ 	u8 res0[0x60];
+-	u32 cs_config[4];       /**< Chip Select x Configuration */
+-#define CSCONFIG_EN         0x80000000
+-#define CSCONFIG_AP         0x00800000
++	u32 cs_config[4];	/**< Chip Select x Configuration */
++#define CSCONFIG_EN	    0x80000000
++#define CSCONFIG_AP	    0x00800000
+ #define CSCONFIG_ROW_BIT    0x00000700
+ #define CSCONFIG_ROW_BIT_12 0x00000000
+ #define CSCONFIG_ROW_BIT_13 0x00000100
+@@ -598,7 +941,7 @@ typedef struct ddr8349{
+ #define CSCONFIG_COL_BIT_10 0x00000002
+ #define CSCONFIG_COL_BIT_11 0x00000003
+ 	u8 res1[0x78];
+-	u32 timing_cfg_1;       /**< SDRAM Timing Configuration 1 */
++	u32 timing_cfg_1;	/**< SDRAM Timing Configuration 1 */
+ #define TIMING_CFG1_PRETOACT 0x70000000
+ #define TIMING_CFG1_PRETOACT_SHIFT   28
+ #define TIMING_CFG1_ACTTOPRE 0x0F000000
+@@ -610,70 +953,70 @@ typedef struct ddr8349{
+ #define TIMING_CFG1_REFREC   0x0000F000
+ #define TIMING_CFG1_REFREC_SHIFT     12
+ #define TIMING_CFG1_WRREC    0x00000700
+-#define TIMING_CFG1_WRREC_SHIFT       8
++#define TIMING_CFG1_WRREC_SHIFT	      8
+ #define TIMING_CFG1_ACTTOACT 0x00000070
+ #define TIMING_CFG1_ACTTOACT_SHIFT    4
+ #define TIMING_CFG1_WRTORD   0x00000007
+ #define TIMING_CFG1_WRTORD_SHIFT      0
+-#define TIMING_CFG1_CASLAT_20 0x00030000  /* CAS latency = 2.0 */
+-#define TIMING_CFG1_CASLAT_25 0x00040000  /* CAS latency = 2.5 */
++#define TIMING_CFG1_CASLAT_20 0x00030000	/* CAS latency = 2.0 */
++#define TIMING_CFG1_CASLAT_25 0x00040000	/* CAS latency = 2.5 */
+ 
+-	u32 timing_cfg_2;       /**< SDRAM Timing Configuration 2 */
+-#define TIMING_CFG2_CPO           0x0F000000
+-#define TIMING_CFG2_CPO_SHIFT             24
+-#define TIMING_CFG2_ACSM          0x00080000
++	u32 timing_cfg_2;	/**< SDRAM Timing Configuration 2 */
++#define TIMING_CFG2_CPO		  0x0F000000
++#define TIMING_CFG2_CPO_SHIFT		  24
++#define TIMING_CFG2_ACSM	  0x00080000
+ #define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
+-#define TIMING_CFG2_WR_DATA_DELAY_SHIFT   10
+-#define TIMING_CFG2_CPO_DEF       0x00000000  /* default (= CASLAT + 1) */
++#define TIMING_CFG2_WR_DATA_DELAY_SHIFT	  10
++#define TIMING_CFG2_CPO_DEF	  0x00000000	/* default (= CASLAT + 1) */
+ 
+-	u32 sdram_cfg;          /**< SDRAM Control Configuration */
++	u32 sdram_cfg;		/**< SDRAM Control Configuration */
+ #define SDRAM_CFG_MEM_EN     0x80000000
+-#define SDRAM_CFG_SREN       0x40000000
++#define SDRAM_CFG_SREN	     0x40000000
+ #define SDRAM_CFG_ECC_EN     0x20000000
+-#define SDRAM_CFG_RD_EN      0x10000000
++#define SDRAM_CFG_RD_EN	     0x10000000
+ #define SDRAM_CFG_SDRAM_TYPE 0x03000000
+ #define SDRAM_CFG_SDRAM_TYPE_SHIFT   24
+ #define SDRAM_CFG_DYN_PWR    0x00200000
+-#define SDRAM_CFG_32_BE      0x00080000
+-#define SDRAM_CFG_8_BE       0x00040000
+-#define SDRAM_CFG_NCAP       0x00020000
+-#define SDRAM_CFG_2T_EN      0x00008000
++#define SDRAM_CFG_32_BE	     0x00080000
++#define SDRAM_CFG_8_BE	     0x00040000
++#define SDRAM_CFG_NCAP	     0x00020000
++#define SDRAM_CFG_2T_EN	     0x00008000
+ #define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
+ 
+ 	u8 res2[4];
+-	u32 sdram_mode;         /**< SDRAM Mode Configuration */
++	u32 sdram_mode;		/**< SDRAM Mode Configuration */
+ #define SDRAM_MODE_ESD 0xFFFF0000
+ #define SDRAM_MODE_ESD_SHIFT   16
+ #define SDRAM_MODE_SD  0x0000FFFF
+-#define SDRAM_MODE_SD_SHIFT     0
+-#define DDR_MODE_EXT_MODEREG    0x4000  /* select extended mode reg */
+-#define DDR_MODE_EXT_OPMODE     0x3FF8  /* operating mode, mask */
+-#define DDR_MODE_EXT_OP_NORMAL  0x0000  /* normal operation */
+-#define DDR_MODE_QFC            0x0004  /* QFC / compatibility, mask */
+-#define DDR_MODE_QFC_COMP       0x0000  /* compatible to older SDRAMs */
+-#define DDR_MODE_WEAK           0x0002  /* weak drivers */
+-#define DDR_MODE_DLL_DIS        0x0001  /* disable DLL */
+-#define DDR_MODE_CASLAT         0x0070  /* CAS latency, mask */
+-#define DDR_MODE_CASLAT_15      0x0010  /* CAS latency 1.5 */
+-#define DDR_MODE_CASLAT_20      0x0020  /* CAS latency 2 */
+-#define DDR_MODE_CASLAT_25      0x0060  /* CAS latency 2.5 */
+-#define DDR_MODE_CASLAT_30      0x0030  /* CAS latency 3 */
+-#define DDR_MODE_BTYPE_SEQ      0x0000  /* sequential burst */
+-#define DDR_MODE_BTYPE_ILVD     0x0008  /* interleaved burst */
+-#define DDR_MODE_BLEN_2         0x0001  /* burst length 2 */
+-#define DDR_MODE_BLEN_4         0x0002  /* burst length 4 */
+-#define DDR_REFINT_166MHZ_7US   1302        /* exact value for 7.8125 µs */
+-#define DDR_BSTOPRE     256     /* use 256 cycles as a starting point */
+-#define DDR_MODE_MODEREG        0x0000  /* select mode register */
++#define SDRAM_MODE_SD_SHIFT	0
++#define DDR_MODE_EXT_MODEREG	0x4000	/* select extended mode reg */
++#define DDR_MODE_EXT_OPMODE	0x3FF8	/* operating mode, mask */
++#define DDR_MODE_EXT_OP_NORMAL	0x0000	/* normal operation */
++#define DDR_MODE_QFC		0x0004	/* QFC / compatibility, mask */
++#define DDR_MODE_QFC_COMP	0x0000	/* compatible to older SDRAMs */
++#define DDR_MODE_WEAK		0x0002	/* weak drivers */
++#define DDR_MODE_DLL_DIS	0x0001	/* disable DLL */
++#define DDR_MODE_CASLAT		0x0070	/* CAS latency, mask */
++#define DDR_MODE_CASLAT_15	0x0010	/* CAS latency 1.5 */
++#define DDR_MODE_CASLAT_20	0x0020	/* CAS latency 2 */
++#define DDR_MODE_CASLAT_25	0x0060	/* CAS latency 2.5 */
++#define DDR_MODE_CASLAT_30	0x0030	/* CAS latency 3 */
++#define DDR_MODE_BTYPE_SEQ	0x0000	/* sequential burst */
++#define DDR_MODE_BTYPE_ILVD	0x0008	/* interleaved burst */
++#define DDR_MODE_BLEN_2		0x0001	/* burst length 2 */
++#define DDR_MODE_BLEN_4		0x0002	/* burst length 4 */
++#define DDR_REFINT_166MHZ_7US	1302	/* exact value for 7.8125 µs */
++#define DDR_BSTOPRE	256	/* use 256 cycles as a starting point */
++#define DDR_MODE_MODEREG	0x0000	/* select mode register */
+ 
+ 	u8 res3[8];
+-	u32 sdram_interval;     /**< SDRAM Interval Configuration */
++	u32 sdram_interval;	/**< SDRAM Interval Configuration */
+ #define SDRAM_INTERVAL_REFINT  0x3FFF0000
+ #define SDRAM_INTERVAL_REFINT_SHIFT    16
+ #define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
+-#define SDRAM_INTERVAL_BSTOPRE_SHIFT    0
+-	u8   res9[8];
+-	u32  sdram_clk_cntl;
++#define SDRAM_INTERVAL_BSTOPRE_SHIFT	0
++	u8 res9[8];
++	u32 sdram_clk_cntl;
+ #define DDR_SDRAM_CLK_CNTL_SS_EN		0x80000000
+ #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025	0x01000000
+ #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05	0x02000000
+@@ -683,37 +1026,37 @@ typedef struct ddr8349{
+ 	u8 res4[0xCCC];
+ 	u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
+ 	u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
+-	u32 ecc_err_inject;     /**< Memory Data Path Error Injection Mask ECC */
++	u32 ecc_err_inject;	/**< Memory Data Path Error Injection Mask ECC */
+ #define ECC_ERR_INJECT_EMB			(0x80000000>>22)	/* ECC Mirror Byte */
+ #define ECC_ERR_INJECT_EIEN			(0x80000000>>23)	/* Error Injection Enable */
+ #define ECC_ERR_INJECT_EEIM			(0xff000000>>24)	/* ECC Erroe Injection Enable */
+ #define ECC_ERR_INJECT_EEIM_SHIFT		0
+ 	u8 res5[0x14];
+-	u32 capture_data_hi;    /**< Memory Data Path Read Capture High */
+-	u32 capture_data_lo;    /**< Memory Data Path Read Capture Low */
+-	u32 capture_ecc;        /**< Memory Data Path Read Capture ECC */
++	u32 capture_data_hi;	/**< Memory Data Path Read Capture High */
++	u32 capture_data_lo;	/**< Memory Data Path Read Capture Low */
++	u32 capture_ecc;	/**< Memory Data Path Read Capture ECC */
+ #define CAPTURE_ECC_ECE				(0xff000000>>24)
+ #define CAPTURE_ECC_ECE_SHIFT			0
+ 	u8 res6[0x14];
+-	u32 err_detect;         /**< Memory Error Detect */
+-#define ECC_ERROR_DETECT_MME			(0x80000000>>0)		/* Multiple Memory Errors */
++	u32 err_detect;		/**< Memory Error Detect */
++#define ECC_ERROR_DETECT_MME			(0x80000000>>0) /* Multiple Memory Errors */
+ #define ECC_ERROR_DETECT_MBE			(0x80000000>>28)	/* Multiple-Bit Error */
+ #define ECC_ERROR_DETECT_SBE			(0x80000000>>29)	/* Single-Bit ECC Error Pickup */
+ #define ECC_ERROR_DETECT_MSE			(0x80000000>>31)	/* Memory Select Error */
+-	u32 err_disable;        /**< Memory Error Disable */
++	u32 err_disable;	/**< Memory Error Disable */
+ #define ECC_ERROR_DISABLE_MBED			(0x80000000>>28)	/* Multiple-Bit ECC Error Disable */
+ #define ECC_ERROR_DISABLE_SBED			(0x80000000>>29)	/* Sinle-Bit ECC Error disable */
+ #define ECC_ERROR_DISABLE_MSED			(0x80000000>>31)	/* Memory Select Error Disable */
+ #define ECC_ERROR_ENABLE			~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED)
+-	u32 err_int_en;         /**< Memory Error Interrupt Enable */
++	u32 err_int_en;		/**< Memory Error Interrupt Enable */
+ #define ECC_ERR_INT_EN_MBEE			(0x80000000>>28)	/* Multiple-Bit ECC Error Interrupt Enable */
+ #define ECC_ERR_INT_EN_SBEE			(0x80000000>>29)	/* Single-Bit ECC Error Interrupt Enable */
+ #define ECC_ERR_INT_EN_MSEE			(0x80000000>>31)	/* Memory Select Error Interrupt Enable */
+ #define ECC_ERR_INT_DISABLE			~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE)
+ 	u32 capture_attributes; /**< Memory Error Attributes Capture */
+-#define ECC_CAPT_ATTR_BNUM			(0xe0000000>>1)		/* Data Beat Num */
++#define ECC_CAPT_ATTR_BNUM			(0xe0000000>>1) /* Data Beat Num */
+ #define ECC_CAPT_ATTR_BNUM_SHIFT		28
+-#define ECC_CAPT_ATTR_TSIZ			(0xc0000000>>6)		/* Transaction Size */
++#define ECC_CAPT_ATTR_TSIZ			(0xc0000000>>6) /* Transaction Size */
+ #define ECC_CAPT_ATTR_TSIZ_FOUR_DW		0
+ #define ECC_CAPT_ATTR_TSIZ_ONE_DW		1
+ #define ECC_CAPT_ATTR_TSIZ_TWO_DW		2
+@@ -738,209 +1081,207 @@ typedef struct ddr8349{
+ #define ECC_CAPT_ATTR_TTYP_R_M_W		0x3
+ #define ECC_CAPT_ATTR_TTYP_SHIFT		12
+ #define ECC_CAPT_ATTR_VLD			(0x80000000>>31)	/* Valid */
+-	u32 capture_address;    /**< Memory Error Address Capture */
++	u32 capture_address;	/**< Memory Error Address Capture */
+ 	u32 capture_ext_address;/**< Memory Error Extended Address Capture */
+-	u32 err_sbe;            /**< Memory Single-Bit ECC Error Management */
+-#define ECC_ERROR_MAN_SBET			(0xff000000>>8)		/* Single-Bit Error Threshold 0..255*/
++	u32 err_sbe;		/**< Memory Single-Bit ECC Error Management */
++#define ECC_ERROR_MAN_SBET			(0xff000000>>8) /* Single-Bit Error Threshold 0..255 */
+ #define ECC_ERROR_MAN_SBET_SHIFT		16
+-#define ECC_ERROR_MAN_SBEC			(0xff000000>>24)	/* Single Bit Error Counter 0..255*/
++#define ECC_ERROR_MAN_SBEC			(0xff000000>>24)	/* Single Bit Error Counter 0..255 */
+ #define ECC_ERROR_MAN_SBEC_SHIFT		0
+ 	u8 res7[0xA4];
+ 	u32 debug_reg;
+ 	u8 res8[0xFC];
+-} ddr8349_t;
++} ddr83xx_t;
+ 
+ /*
+  * I2C1 Controller
+  */
+ 
+-
+ /*
+  * DUART
+  */
+-typedef struct duart8349{
++typedef struct duart83xx {
+ 	u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
+-	u8 uier_udmb;      /**< combined register for UIER and UDMB */
++	u8 uier_udmb;	   /**< combined register for UIER and UDMB */
+ 	u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
+-	u8 ulcr;        /**< line control register */
+-	u8 umcr;        /**< MODEM control register */
+-	u8 ulsr;        /**< line status register */
+-	u8 umsr;        /**< MODEM status register */
+-	u8 uscr;        /**< scratch register */
++	u8 ulcr;	/**< line control register */
++	u8 umcr;	/**< MODEM control register */
++	u8 ulsr;	/**< line status register */
++	u8 umsr;	/**< MODEM status register */
++	u8 uscr;	/**< scratch register */
+ 	u8 res0[8];
+-	u8 udsr;        /**< DMA status register */
++	u8 udsr;	/**< DMA status register */
+ 	u8 res1[3];
+ 	u8 res2[0xEC];
+-} duart8349_t;
++} duart83xx_t;
+ 
+ /*
+  * Local Bus Controller Registers
+  */
+-typedef struct lbus_bank{
+-	u32 br;             /**< Base Register  */
+-	u32 or;             /**< Base Register  */
++typedef struct lbus_bank {
++	u32 br;		    /**< Base Register	*/
++	u32 or;		    /**< Base Register	*/
+ } lbus_bank_t;
+ 
+-typedef struct lbus8349 {
++typedef struct lbus83xx {
+ 	lbus_bank_t bank[8];
+ 	u8 res0[0x28];
+-	u32 mar;                /**< UPM Address Register */
++	u32 mar;		/**< UPM Address Register */
+ 	u8 res1[0x4];
+-	u32 mamr;               /**< UPMA Mode Register */
+-	u32 mbmr;               /**< UPMB Mode Register */
+-	u32 mcmr;               /**< UPMC Mode Register */
++	u32 mamr;		/**< UPMA Mode Register */
++	u32 mbmr;		/**< UPMB Mode Register */
++	u32 mcmr;		/**< UPMC Mode Register */
+ 	u8 res2[0x8];
+-	u32 mrtpr;              /**< Memory Refresh Timer Prescaler Register */
+-	u32 mdr;                /**< UPM Data Register */
++	u32 mrtpr;		/**< Memory Refresh Timer Prescaler Register */
++	u32 mdr;		/**< UPM Data Register */
+ 	u8 res3[0x8];
+-	u32 lsdmr;              /**< SDRAM Mode Register */
++	u32 lsdmr;		/**< SDRAM Mode Register */
+ 	u8 res4[0x8];
+-	u32 lurt;               /**< UPM Refresh Timer */
+-	u32 lsrt;               /**< SDRAM Refresh Timer */
++	u32 lurt;		/**< UPM Refresh Timer */
++	u32 lsrt;		/**< SDRAM Refresh Timer */
+ 	u8 res5[0x8];
+-	u32 ltesr;              /**< Transfer Error Status Register */
+-	u32 ltedr;              /**< Transfer Error Disable Register */
+-	u32 lteir;              /**< Transfer Error Interrupt Register */
+-	u32 lteatr;             /**< Transfer Error Attributes Register */
+-	u32 ltear;              /**< Transfer Error Address Register */
++	u32 ltesr;		/**< Transfer Error Status Register */
++	u32 ltedr;		/**< Transfer Error Disable Register */
++	u32 lteir;		/**< Transfer Error Interrupt Register */
++	u32 lteatr;		/**< Transfer Error Attributes Register */
++	u32 ltear;		/**< Transfer Error Address Register */
+ 	u8 res6[0xC];
+-	u32 lbcr;               /**< Configuration Register */
++	u32 lbcr;		/**< Configuration Register */
+ #define LBCR_LDIS  0x80000000
+-#define LBCR_LDIS_SHIFT    31
++#define LBCR_LDIS_SHIFT	   31
+ #define LBCR_BCTLC 0x00C00000
+ #define LBCR_BCTLC_SHIFT   22
+ #define LBCR_LPBSE 0x00020000
+ #define LBCR_LPBSE_SHIFT   17
+ #define LBCR_EPAR  0x00010000
+-#define LBCR_EPAR_SHIFT    16
++#define LBCR_EPAR_SHIFT	   16
+ #define LBCR_BMT   0x0000FF00
+-#define LBCR_BMT_SHIFT      8
+-	u32 lcrr;               /**< Clock Ratio Register */
++#define LBCR_BMT_SHIFT	    8
++	u32 lcrr;		/**< Clock Ratio Register */
+ #define LCRR_DBYP    0x80000000
+-#define LCRR_DBYP_SHIFT      31
++#define LCRR_DBYP_SHIFT	     31
+ #define LCRR_BUFCMDC 0x30000000
+ #define LCRR_BUFCMDC_SHIFT   28
+ #define LCRR_ECL     0x03000000
+-#define LCRR_ECL_SHIFT       24
++#define LCRR_ECL_SHIFT	     24
+ #define LCRR_EADC    0x00030000
+-#define LCRR_EADC_SHIFT      16
++#define LCRR_EADC_SHIFT	     16
+ #define LCRR_CLKDIV  0x0000000F
+ #define LCRR_CLKDIV_SHIFT     0
+ 
+-
+ 	u8 res7[0x28];
+ 	u8 res8[0xF00];
+-} lbus8349_t;
++} lbus83xx_t;
+ 
++#if defined (CONFIG_MPC8349)
+ /*
+  * Serial Peripheral Interface
+  */
+-typedef struct spi8349
+-{
++typedef struct spi83xx {
+ 	u32 mode;     /**< mode register  */
+ 	u32 event;    /**< event register */
+ 	u32 mask;     /**< mask register  */
+ 	u32 com;      /**< command register */
+ 	u8 res0[0x10];
+-	u32 tx;       /**< transmit register */
+-	u32 rx;       /**< receive register */
++	u32 tx;	      /**< transmit register */
++	u32 rx;	      /**< receive register */
+ 	u8 res1[0xD8];
+-} spi8349_t;
+-
++} spi83xx_t;
++#endif
+ 
+ /*
+  * DMA/Messaging Unit
+  */
+-typedef struct dma8349 {
+-	u32 res0[0xC];	/* 0x0-0x29 reseverd */
+-	u32 omisr;	/* 0x30 Outbound message interrupt status register */
+-	u32 omimr;	/* 0x34 Outbound message interrupt mask register */
+-	u32 res1[0x6];	/* 0x38-0x49 reserved */
+-
+-	u32 imr0;	/* 0x50 Inbound message register 0 */
+-	u32 imr1;	/* 0x54 Inbound message register 1 */
+-	u32 omr0;	/* 0x58 Outbound message register 0 */
+-	u32 omr1;	/* 0x5C Outbound message register 1 */
+-
+-	u32 odr;	/* 0x60 Outbound doorbell register */
+-	u32 res2;	/* 0x64-0x67 reserved */
+-	u32 idr;	/* 0x68 Inbound doorbell register */
+-	u32 res3[0x5];	/* 0x6C-0x79 reserved */
+-
+-	u32 imisr;	/* 0x80 Inbound message interrupt status register */
+-	u32 imimr;	/* 0x84 Inbound message interrupt mask register */
+-	u32 res4[0x1E];	/* 0x88-0x99 reserved */
+-
+-	u32 dmamr0;	/* 0x100 DMA 0 mode register */
+-	u32 dmasr0;	/* 0x104 DMA 0 status register */
+-	u32 dmacdar0;	/* 0x108 DMA 0 current descriptor address register */
+-	u32 res5;	/* 0x10C reserved */
+-	u32 dmasar0;	/* 0x110 DMA 0 source address register */
+-	u32 res6;	/* 0x114 reserved */
+-	u32 dmadar0;	/* 0x118 DMA 0 destination address register */
+-	u32 res7;	/* 0x11C reserved */
+-	u32 dmabcr0;	/* 0x120 DMA 0 byte count register */
+-	u32 dmandar0;	/* 0x124 DMA 0 next descriptor address register */
+-	u32 res8[0x16];	/* 0x128-0x179 reserved */
+-
+-	u32 dmamr1;	/* 0x180 DMA 1 mode register */
+-	u32 dmasr1;	/* 0x184 DMA 1 status register */
+-	u32 dmacdar1;	/* 0x188 DMA 1 current descriptor address register */
+-	u32 res9;	/* 0x18C reserved */
+-	u32 dmasar1;	/* 0x190 DMA 1 source address register */
+-	u32 res10;	/* 0x194 reserved */
+-	u32 dmadar1;	/* 0x198 DMA 1 destination address register */
+-	u32 res11;	/* 0x19C reserved */
+-	u32 dmabcr1;	/* 0x1A0 DMA 1 byte count register */
+-	u32 dmandar1;	/* 0x1A4 DMA 1 next descriptor address register */
+-	u32 res12[0x16];/* 0x1A8-0x199 reserved */
+-
+-	u32 dmamr2;	/* 0x200 DMA 2 mode register */
+-	u32 dmasr2;	/* 0x204 DMA 2 status register */
+-	u32 dmacdar2;	/* 0x208 DMA 2 current descriptor address register */
+-	u32 res13;	/* 0x20C reserved */
+-	u32 dmasar2;	/* 0x210 DMA 2 source address register */
+-	u32 res14;	/* 0x214 reserved */
+-	u32 dmadar2;	/* 0x218 DMA 2 destination address register */
+-	u32 res15;	/* 0x21C reserved */
+-	u32 dmabcr2;	/* 0x220 DMA 2 byte count register */
+-	u32 dmandar2;	/* 0x224 DMA 2 next descriptor address register */
+-	u32 res16[0x16];/* 0x228-0x279 reserved */
+-
+-	u32 dmamr3;	/* 0x280 DMA 3 mode register */
+-	u32 dmasr3;	/* 0x284 DMA 3 status register */
+-	u32 dmacdar3;	/* 0x288 DMA 3 current descriptor address register */
+-	u32 res17;	/* 0x28C reserved */
+-	u32 dmasar3;	/* 0x290 DMA 3 source address register */
+-	u32 res18;	/* 0x294 reserved */
+-	u32 dmadar3;	/* 0x298 DMA 3 destination address register */
+-	u32 res19;	/* 0x29C reserved */
+-	u32 dmabcr3;	/* 0x2A0 DMA 3 byte count register */
+-	u32 dmandar3;	/* 0x2A4 DMA 3 next descriptor address register */
+-
+-	u32 dmagsr;	/* 0x2A8 DMA general status register */
+-	u32 res20[0x15];/* 0x2AC-0x2FF reserved */
+-} dma8349_t;
++typedef struct dma83xx {
++	u32 res0[0xC];		/* 0x0-0x29 reseverd */
++	u32 omisr;		/* 0x30 Outbound message interrupt status register */
++	u32 omimr;		/* 0x34 Outbound message interrupt mask register */
++	u32 res1[0x6];		/* 0x38-0x49 reserved */
++
++	u32 imr0;		/* 0x50 Inbound message register 0 */
++	u32 imr1;		/* 0x54 Inbound message register 1 */
++	u32 omr0;		/* 0x58 Outbound message register 0 */
++	u32 omr1;		/* 0x5C Outbound message register 1 */
++
++	u32 odr;		/* 0x60 Outbound doorbell register */
++	u32 res2;		/* 0x64-0x67 reserved */
++	u32 idr;		/* 0x68 Inbound doorbell register */
++	u32 res3[0x5];		/* 0x6C-0x79 reserved */
++
++	u32 imisr;		/* 0x80 Inbound message interrupt status register */
++	u32 imimr;		/* 0x84 Inbound message interrupt mask register */
++	u32 res4[0x1E];		/* 0x88-0x99 reserved */
++
++	u32 dmamr0;		/* 0x100 DMA 0 mode register */
++	u32 dmasr0;		/* 0x104 DMA 0 status register */
++	u32 dmacdar0;		/* 0x108 DMA 0 current descriptor address register */
++	u32 res5;		/* 0x10C reserved */
++	u32 dmasar0;		/* 0x110 DMA 0 source address register */
++	u32 res6;		/* 0x114 reserved */
++	u32 dmadar0;		/* 0x118 DMA 0 destination address register */
++	u32 res7;		/* 0x11C reserved */
++	u32 dmabcr0;		/* 0x120 DMA 0 byte count register */
++	u32 dmandar0;		/* 0x124 DMA 0 next descriptor address register */
++	u32 res8[0x16];		/* 0x128-0x179 reserved */
++
++	u32 dmamr1;		/* 0x180 DMA 1 mode register */
++	u32 dmasr1;		/* 0x184 DMA 1 status register */
++	u32 dmacdar1;		/* 0x188 DMA 1 current descriptor address register */
++	u32 res9;		/* 0x18C reserved */
++	u32 dmasar1;		/* 0x190 DMA 1 source address register */
++	u32 res10;		/* 0x194 reserved */
++	u32 dmadar1;		/* 0x198 DMA 1 destination address register */
++	u32 res11;		/* 0x19C reserved */
++	u32 dmabcr1;		/* 0x1A0 DMA 1 byte count register */
++	u32 dmandar1;		/* 0x1A4 DMA 1 next descriptor address register */
++	u32 res12[0x16];	/* 0x1A8-0x199 reserved */
++
++	u32 dmamr2;		/* 0x200 DMA 2 mode register */
++	u32 dmasr2;		/* 0x204 DMA 2 status register */
++	u32 dmacdar2;		/* 0x208 DMA 2 current descriptor address register */
++	u32 res13;		/* 0x20C reserved */
++	u32 dmasar2;		/* 0x210 DMA 2 source address register */
++	u32 res14;		/* 0x214 reserved */
++	u32 dmadar2;		/* 0x218 DMA 2 destination address register */
++	u32 res15;		/* 0x21C reserved */
++	u32 dmabcr2;		/* 0x220 DMA 2 byte count register */
++	u32 dmandar2;		/* 0x224 DMA 2 next descriptor address register */
++	u32 res16[0x16];	/* 0x228-0x279 reserved */
++
++	u32 dmamr3;		/* 0x280 DMA 3 mode register */
++	u32 dmasr3;		/* 0x284 DMA 3 status register */
++	u32 dmacdar3;		/* 0x288 DMA 3 current descriptor address register */
++	u32 res17;		/* 0x28C reserved */
++	u32 dmasar3;		/* 0x290 DMA 3 source address register */
++	u32 res18;		/* 0x294 reserved */
++	u32 dmadar3;		/* 0x298 DMA 3 destination address register */
++	u32 res19;		/* 0x29C reserved */
++	u32 dmabcr3;		/* 0x2A0 DMA 3 byte count register */
++	u32 dmandar3;		/* 0x2A4 DMA 3 next descriptor address register */
++
++	u32 dmagsr;		/* 0x2A8 DMA general status register */
++	u32 res20[0x15];	/* 0x2AC-0x2FF reserved */
++} dma83xx_t;
+ 
+ /* DMAMRn bits */
+-#define DMA_CHANNEL_START			(0x00000001)		/* Bit - DMAMRn CS */
+-#define DMA_CHANNEL_TRANSFER_MODE_DIRECT	(0x00000004)		/* Bit - DMAMRn CTM */
+-#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN	(0x00001000)		/* Bit - DMAMRn SAHE */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B	(0x00000000)		/* 2Bit- DMAMRn SAHTS 1byte */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B	(0x00004000)		/* 2Bit- DMAMRn SAHTS 2bytes */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B	(0x00008000)		/* 2Bit- DMAMRn SAHTS 4bytes */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B	(0x0000c000)		/* 2Bit- DMAMRn SAHTS 8bytes */
+-#define DMA_CHANNEL_SNOOP			(0x00010000)		/* Bit - DMAMRn DMSEN */
++#define DMA_CHANNEL_START			(0x00000001)	/* Bit - DMAMRn CS */
++#define DMA_CHANNEL_TRANSFER_MODE_DIRECT	(0x00000004)	/* Bit - DMAMRn CTM */
++#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN	(0x00001000)	/* Bit - DMAMRn SAHE */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B	(0x00000000)	/* 2Bit- DMAMRn SAHTS 1byte */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B	(0x00004000)	/* 2Bit- DMAMRn SAHTS 2bytes */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B	(0x00008000)	/* 2Bit- DMAMRn SAHTS 4bytes */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B	(0x0000c000)	/* 2Bit- DMAMRn SAHTS 8bytes */
++#define DMA_CHANNEL_SNOOP			(0x00010000)	/* Bit - DMAMRn DMSEN */
+ 
+ /* DMASRn bits */
+-#define DMA_CHANNEL_BUSY 			(0x00000004)		/* Bit - DMASRn CB */
+-#define DMA_CHANNEL_TRANSFER_ERROR		(0x00000080)		/* Bit - DMASRn TE */
++#define DMA_CHANNEL_BUSY			(0x00000004)	/* Bit - DMASRn CB */
++#define DMA_CHANNEL_TRANSFER_ERROR		(0x00000080)	/* Bit - DMASRn TE */
+ 
+ /*
+  * PCI Software Configuration Registers
+  */
+-typedef struct pciconf8349 {
+-	u32	config_address;
++typedef struct pciconf83xx {
++	u32 config_address;
+ #define PCI_CONFIG_ADDRESS_EN	0x80000000
+ #define PCI_CONFIG_ADDRESS_BN_SHIFT	16
+ #define PCI_CONFIG_ADDRESS_BN_MASK	0x00ff0000
+@@ -952,235 +1293,788 @@ typedef struct pciconf8349 {
+ #define PCI_CONFIG_ADDRESS_RN_MASK	0x000000fc
+ 	u32 config_data;
+ 	u32 int_ack;
+-	u8	res[116];
+-} pciconf8349_t;
++	u8 res[116];
++} pciconf83xx_t;
+ 
+ /*
+  * PCI Outbound Translation Register
+  */
+ typedef struct pci_outbound_window {
+-	u32	potar;
+-	u8	res0[4];
+-	u32	pobar;
+-	u8	res1[4];
+-	u32	pocmr;
+-	u8	res2[4];
+-} pot8349_t;
++	u32 potar;
++	u8 res0[4];
++	u32 pobar;
++	u8 res1[4];
++	u32 pocmr;
++	u8 res2[4];
++} pot83xx_t;
++
+ /*
+  * Sequencer
+  */
+-typedef struct ios8349 {
+-	pot8349_t	pot[6];
++typedef struct ios83xx {
++	pot83xx_t pot[6];
+ #define POTAR_TA_MASK	0x000fffff
+-#define	POBAR_BA_MASK	0x000fffff
+-#define	POCMR_EN	0x80000000
+-#define	POCMR_IO	0x40000000	/* 0--memory space 1--I/O space */
+-#define	POCMR_SE	0x20000000	/* streaming enable */
+-#define	POCMR_DST	0x10000000	/* 0--PCI1 1--PCI2*/
+-#define	POCMR_CM_MASK	0x000fffff
+-#define	POCMR_CM_4G	0x00000000
+-#define	POCMR_CM_2G	0x00080000
+-#define	POCMR_CM_1G	0x000C0000
+-#define	POCMR_CM_512M	0x000E0000
+-#define	POCMR_CM_256M	0x000F0000
+-#define	POCMR_CM_128M	0x000F8000
+-#define	POCMR_CM_64M	0x000FC000
+-#define	POCMR_CM_32M	0x000FE000
+-#define	POCMR_CM_16M	0x000FF000
+-#define	POCMR_CM_8M	0x000FF800
+-#define	POCMR_CM_4M	0x000FFC00
+-#define	POCMR_CM_2M	0x000FFE00
+-#define	POCMR_CM_1M	0x000FFF00
+-#define	POCMR_CM_512K	0x000FFF80
+-#define	POCMR_CM_256K	0x000FFFC0
+-#define	POCMR_CM_128K	0x000FFFE0
+-#define	POCMR_CM_64K	0x000FFFF0
+-#define	POCMR_CM_32K	0x000FFFF8
+-#define	POCMR_CM_16K	0x000FFFFC
+-#define	POCMR_CM_8K	0x000FFFFE
+-#define	POCMR_CM_4K	0x000FFFFF
+-	u8	res0[0x60];
+-	u32	pmcr;
+-	u8	res1[4];
+-	u32	dtcr;
+-	u8	res2[4];
+-} ios8349_t;
++#define POBAR_BA_MASK	0x000fffff
++#define POCMR_EN	0x80000000
++#define POCMR_IO	0x40000000	/* 0--memory space 1--I/O space */
++#define POCMR_SE	0x20000000	/* streaming enable */
++#define POCMR_DST	0x10000000	/* 0--PCI1 1--PCI2 */
++#define POCMR_CM_MASK	0x000fffff
++#define POCMR_CM_4G	0x00000000
++#define POCMR_CM_2G	0x00080000
++#define POCMR_CM_1G	0x000C0000
++#define POCMR_CM_512M	0x000E0000
++#define POCMR_CM_256M	0x000F0000
++#define POCMR_CM_128M	0x000F8000
++#define POCMR_CM_64M	0x000FC000
++#define POCMR_CM_32M	0x000FE000
++#define POCMR_CM_16M	0x000FF000
++#define POCMR_CM_8M	0x000FF800
++#define POCMR_CM_4M	0x000FFC00
++#define POCMR_CM_2M	0x000FFE00
++#define POCMR_CM_1M	0x000FFF00
++#define POCMR_CM_512K	0x000FFF80
++#define POCMR_CM_256K	0x000FFFC0
++#define POCMR_CM_128K	0x000FFFE0
++#define POCMR_CM_64K	0x000FFFF0
++#define POCMR_CM_32K	0x000FFFF8
++#define POCMR_CM_16K	0x000FFFFC
++#define POCMR_CM_8K	0x000FFFFE
++#define POCMR_CM_4K	0x000FFFFF
++	u8 res0[0x60];
++	u32 pmcr;
++	u8 res1[4];
++	u32 dtcr;
++	u8 res2[4];
++} ios83xx_t;
+ 
+ /*
+  * PCI Controller Control and Status Registers
+  */
+-typedef struct pcictrl8349 {
+-	u32	esr;
++typedef struct pcictrl83xx {
++	u32 esr;
+ #define ESR_MERR	0x80000000
+ #define ESR_APAR	0x00000400
+-#define	ESR_PCISERR	0x00000200
+-#define	ESR_MPERR	0x00000100
+-#define	ESR_TPERR	0x00000080
+-#define	ESR_NORSP	0x00000040
+-#define	ESR_TABT	0x00000020
+-	u32	ecdr;
++#define ESR_PCISERR	0x00000200
++#define ESR_MPERR	0x00000100
++#define ESR_TPERR	0x00000080
++#define ESR_NORSP	0x00000040
++#define ESR_TABT	0x00000020
++	u32 ecdr;
+ #define ECDR_APAR	0x00000400
+-#define	ECDR_PCISERR	0x00000200
+-#define	ECDR_MPERR	0x00000100
+-#define	ECDR_TPERR	0x00000080
+-#define	ECDR_NORSP	0x00000040
+-#define	ECDR_TABT	0x00000020
++#define ECDR_PCISERR	0x00000200
++#define ECDR_MPERR	0x00000100
++#define ECDR_TPERR	0x00000080
++#define ECDR_NORSP	0x00000040
++#define ECDR_TABT	0x00000020
+ 	u32 eer;
+ #define EER_APAR	0x00000400
+-#define	EER_PCISERR	0x00000200
+-#define	EER_MPERR	0x00000100
+-#define	EER_TPERR	0x00000080
+-#define	EER_NORSP	0x00000040
+-#define	EER_TABT	0x00000020
+-	u32	eatcr;
+-#define	EATCR_ERRTYPR_MASK	0x70000000
+-#define	EATCR_ERRTYPR_APR	0x00000000	/* address parity error */
+-#define	EATCR_ERRTYPR_WDPR	0x10000000	/* write data parity error */
+-#define	EATCR_ERRTYPR_RDPR	0x20000000	/* read data parity error */
+-#define	EATCR_ERRTYPR_MA	0x30000000	/* master abort */
+-#define	EATCR_ERRTYPR_TA	0x40000000	/* target abort */
+-#define	EATCR_ERRTYPR_SE	0x50000000	/* system error indication received */
+-#define	EATCR_ERRTYPR_PEA	0x60000000	/* parity error indication received on a read */
+-#define	EATCR_ERRTYPR_PEW	0x70000000	/* parity error indication received on a write */
++#define EER_PCISERR	0x00000200
++#define EER_MPERR	0x00000100
++#define EER_TPERR	0x00000080
++#define EER_NORSP	0x00000040
++#define EER_TABT	0x00000020
++	u32 eatcr;
++#define EATCR_ERRTYPR_MASK	0x70000000
++#define EATCR_ERRTYPR_APR	0x00000000	/* address parity error */
++#define EATCR_ERRTYPR_WDPR	0x10000000	/* write data parity error */
++#define EATCR_ERRTYPR_RDPR	0x20000000	/* read data parity error */
++#define EATCR_ERRTYPR_MA	0x30000000	/* master abort */
++#define EATCR_ERRTYPR_TA	0x40000000	/* target abort */
++#define EATCR_ERRTYPR_SE	0x50000000	/* system error indication received */
++#define EATCR_ERRTYPR_PEA	0x60000000	/* parity error indication received on a read */
++#define EATCR_ERRTYPR_PEW	0x70000000	/* parity error indication received on a write */
+ #define EATCR_BN_MASK		0x0f000000	/* beat number */
+-#define	EATCR_BN_1st		0x00000000
+-#define	EATCR_BN_2ed		0x01000000
+-#define	EATCR_BN_3rd		0x02000000
+-#define	EATCR_BN_4th		0x03000000
+-#define	EATCR_BN_5th		0x0400000
+-#define	EATCR_BN_6th		0x05000000
+-#define	EATCR_BN_7th		0x06000000
+-#define	EATCR_BN_8th		0x07000000
+-#define	EATCR_BN_9th		0x08000000
++#define EATCR_BN_1st		0x00000000
++#define EATCR_BN_2ed		0x01000000
++#define EATCR_BN_3rd		0x02000000
++#define EATCR_BN_4th		0x03000000
++#define EATCR_BN_5th		0x0400000
++#define EATCR_BN_6th		0x05000000
++#define EATCR_BN_7th		0x06000000
++#define EATCR_BN_8th		0x07000000
++#define EATCR_BN_9th		0x08000000
+ #define EATCR_TS_MASK		0x00300000	/* transaction size */
+-#define	EATCR_TS_4		0x00000000
+-#define	EATCR_TS_1		0x00100000
+-#define	EATCR_TS_2		0x00200000
+-#define	EATCR_TS_3		0x00300000
+-#define	EATCR_ES_MASK		0x000f0000	/* error source */
+-#define	EATCR_ES_EM		0x00000000	/* external master */
+-#define	EATCR_ES_DMA		0x00050000
+-#define	EATCR_CMD_MASK		0x0000f000
+-#define	EATCR_HBE_MASK		0x00000f00	/* PCI high byte enable*/
+-#define	EATCR_BE_MASK		0x000000f0	/* PCI byte enable */
+-#define	EATCR_HPB		0x00000004	/* high parity bit */
+-#define	EATCR_PB		0x00000002	/* parity bit*/
+-#define	EATCR_VI		0x00000001	/* error information valid */
+-	u32	eacr;
+-	u32	eeacr;
+-	u32	edlcr;
+-	u32	edhcr;
+-	u32	gcr;
+-	u32	ecr;
+-	u32	gsr;
+-	u8	res0[12];
+-	u32	pitar2;
+-	u8	res1[4];
+-	u32	pibar2;
+-	u32	piebar2;
+-	u32	piwar2;
+-	u8	res2[4];
+-	u32	pitar1;
+-	u8	res3[4];
+-	u32	pibar1;
+-	u32	piebar1;
+-	u32	piwar1;
+-	u8	res4[4];
+-	u32	pitar0;
+-	u8	res5[4];
+-	u32	pibar0;
+-	u8	res6[4];
+-	u32	piwar0;
+-	u8	res7[132];
++#define EATCR_TS_4		0x00000000
++#define EATCR_TS_1		0x00100000
++#define EATCR_TS_2		0x00200000
++#define EATCR_TS_3		0x00300000
++#define EATCR_ES_MASK		0x000f0000	/* error source */
++#define EATCR_ES_EM		0x00000000	/* external master */
++#define EATCR_ES_DMA		0x00050000
++#define EATCR_CMD_MASK		0x0000f000
++#if defined (CONFIG_MPC8349)
++#define EATCR_HBE_MASK		0x00000f00	/* PCI high byte enable */
++#endif
++#define EATCR_BE_MASK		0x000000f0	/* PCI byte enable */
++#if defined (CONFIG_MPC8349)
++#define EATCR_HPB		0x00000004	/* high parity bit */
++#endif
++#define EATCR_PB		0x00000002	/* parity bit */
++#define EATCR_VI		0x00000001	/* error information valid */
++	u32 eacr;
++	u32 eeacr;
++#if defined (CONFIG_MPC8349)
++	u32 edlcr;
++	u32 edhcr;
++#elif defined (CONFIG_MPC8360)
++	u32 edcr;		/* was edlcr */
++	u8 res_edcr[0x4];
++#endif
++	u32 gcr;
++	u32 ecr;
++	u32 gsr;
++	u8 res0[12];
++	u32 pitar2;
++	u8 res1[4];
++	u32 pibar2;
++	u32 piebar2;
++	u32 piwar2;
++	u8 res2[4];
++	u32 pitar1;
++	u8 res3[4];
++	u32 pibar1;
++	u32 piebar1;
++	u32 piwar1;
++	u8 res4[4];
++	u32 pitar0;
++	u8 res5[4];
++	u32 pibar0;
++	u8 res6[4];
++	u32 piwar0;
++	u8 res7[132];
+ #define PITAR_TA_MASK		0x000fffff
+ #define PIBAR_MASK		0xffffffff
+ #define PIEBAR_EBA_MASK		0x000fffff
+ #define PIWAR_EN		0x80000000
+ #define PIWAR_PF		0x20000000
+-#define	PIWAR_RTT_MASK		0x000f0000
+-#define	PIWAR_RTT_NO_SNOOP	0x00040000
++#define PIWAR_RTT_MASK		0x000f0000
++#define PIWAR_RTT_NO_SNOOP	0x00040000
+ #define PIWAR_RTT_SNOOP		0x00050000
+-#define	PIWAR_WTT_MASK		0x0000f000
+-#define	PIWAR_WTT_NO_SNOOP	0x00004000
++#define PIWAR_WTT_MASK		0x0000f000
++#define PIWAR_WTT_NO_SNOOP	0x00004000
+ #define PIWAR_WTT_SNOOP		0x00005000
+-#define	PIWAR_IWS_MASK	0x0000003F
+-#define	PIWAR_IWS_4K	0x0000000B
+-#define	PIWAR_IWS_8K	0x0000000C
+-#define	PIWAR_IWS_16K	0x0000000D
+-#define	PIWAR_IWS_32K	0x0000000E
+-#define	PIWAR_IWS_64K	0x0000000F
+-#define	PIWAR_IWS_128K	0x00000010
+-#define	PIWAR_IWS_256K	0x00000011
+-#define	PIWAR_IWS_512K	0x00000012
+-#define	PIWAR_IWS_1M	0x00000013
+-#define	PIWAR_IWS_2M	0x00000014
+-#define	PIWAR_IWS_4M	0x00000015
+-#define	PIWAR_IWS_8M	0x00000016
+-#define	PIWAR_IWS_16M	0x00000017
+-#define	PIWAR_IWS_32M	0x00000018
+-#define	PIWAR_IWS_64M	0x00000019
+-#define	PIWAR_IWS_128M	0x0000001A
+-#define	PIWAR_IWS_256M	0x0000001B
+-#define	PIWAR_IWS_512M	0x0000001C
+-#define	PIWAR_IWS_1G	0x0000001D
+-#define	PIWAR_IWS_2G	0x0000001E
+-} pcictrl8349_t;
++#define PIWAR_IWS_MASK	0x0000003F
++#define PIWAR_IWS_4K	0x0000000B
++#define PIWAR_IWS_8K	0x0000000C
++#define PIWAR_IWS_16K	0x0000000D
++#define PIWAR_IWS_32K	0x0000000E
++#define PIWAR_IWS_64K	0x0000000F
++#define PIWAR_IWS_128K	0x00000010
++#define PIWAR_IWS_256K	0x00000011
++#define PIWAR_IWS_512K	0x00000012
++#define PIWAR_IWS_1M	0x00000013
++#define PIWAR_IWS_2M	0x00000014
++#define PIWAR_IWS_4M	0x00000015
++#define PIWAR_IWS_8M	0x00000016
++#define PIWAR_IWS_16M	0x00000017
++#define PIWAR_IWS_32M	0x00000018
++#define PIWAR_IWS_64M	0x00000019
++#define PIWAR_IWS_128M	0x0000001A
++#define PIWAR_IWS_256M	0x0000001B
++#define PIWAR_IWS_512M	0x0000001C
++#define PIWAR_IWS_1G	0x0000001D
++#define PIWAR_IWS_2G	0x0000001E
++} pcictrl83xx_t;
+ 
++#if defined (CONFIG_MPC8349)
+ /*
+  * USB
+  */
+-typedef struct usb8349 {
++typedef struct usb83xx {
+ 	u8 fixme[0x2000];
+-} usb8349_t;
++} usb83xx_t;
+ 
+ /*
+  * TSEC
+  */
+-typedef struct tsec8349 {
++typedef struct tsec83xx {
+ 	u8 fixme[0x1000];
+-} tsec8349_t;
++} tsec83xx_t;
++#endif
+ 
+ /*
+  * Security
+  */
+-typedef struct security8349 {
++typedef struct security83xx {
+ 	u8 fixme[0x10000];
+-} security8349_t;
++} security83xx_t;
++
++#if defined (CONFIG_MPC8360)
++/*
++ * iram
++ */
++typedef struct iram83xx {
++	u32 iadd;		/* I-RAM address register */
++	u32 idata;		/* I-RAM data register */
++	u8 res0[0x78];
++} iram83xx_t;
++
++/*
++ * Interrupt Controller
++ */
++typedef struct irq83xx {
++	u32 cicr;		/* QE system interrupt configuration */
++	u32 civec;		/* QE system interrupt vector register */
++	u32 cripnr;		/* QE RISC interrupt pending register */
++	u32 cipnr;		/*  QE system interrupt pending register */
++	u32 cipxcc;		/* QE interrupt priority register */
++	u32 cipycc;		/* QE interrupt priority register */
++	u32 cipwcc;		/* QE interrupt priority register */
++	u32 cipzcc;		/* QE interrupt priority register */
++	u32 cimr;		/* QE system interrupt mask register */
++	u32 crimr;		/* QE RISC interrupt mask register */
++	u32 cicnr;		/* QE system interrupt control register */
++	u8 res0[0x4];
++	u32 ciprta;		/* QE system interrupt priority register for RISC tasks A */
++	u32 ciprtb;		/* QE system interrupt priority register for RISC tasks B */
++	u8 res1[0x4];
++	u32 cricr;		/* QE system RISC interrupt control */
++	u8 res2[0x20];
++	u32 chivec;		/* QE high system interrupt vector */
++	u8 res3[0x1C];
++} irq83xx_t;
++
++/*
++ * Communications Processor
++ */
++typedef struct cp83xx {
++	u32 cecr;		/* QE command register */
++	u32 ceccr;		/* QE controller configuration register */
++	u32 cecdr;		/* QE command data register */
++	u8 res0[0xA];
++	u16 ceter;		/* QE timer event register */
++	u8 res1[0x2];
++	u16 cetmr;		/* QE timers mask register */
++	u32 cetscr;		/* QE time-stamp timer control register */
++	u32 cetsr1;		/* QE time-stamp register 1 */
++	u32 cetsr2;		/* QE time-stamp register 2 */
++	u8 res2[0x8];
++	u32 cevter;		/* QE virtual tasks event register */
++	u32 cevtmr;		/* QE virtual tasks mask register */
++	u16 cercr;		/* QE RAM control register */
++	u8 res3[0x2];
++	u8 res4[0x24];
++	u16 ceexe1;		/* QE external request 1 event register */
++	u8 res5[0x2];
++	u16 ceexm1;		/* QE external request 1 mask register */
++	u8 res6[0x2];
++	u16 ceexe2;		/* QE external request 2 event register */
++	u8 res7[0x2];
++	u16 ceexm2;		/* QE external request 2 mask register */
++	u8 res8[0x2];
++	u16 ceexe3;		/* QE external request 3 event register */
++	u8 res9[0x2];
++	u16 ceexm3;		/* QE external request 3 mask register */
++	u8 res10[0x2];
++	u16 ceexe4;		/* QE external request 4 event register */
++	u8 res11[0x2];
++	u16 ceexm4;		/* QE external request 4 mask register */
++	u8 res12[0x2];
++	u8 res13[0x280];
++} cp83xx_t;
++
++/*
++ * QE Multiplexer
++ */
++
++typedef struct qmx83xx {
++	u32 cmxgcr;		/* CMX general clock route register */
++	u32 cmxsi1cr_l;		/* CMX SI1 clock route low register */
++	u32 cmxsi1cr_h;		/* CMX SI1 clock route high register */
++	u32 cmxsi1syr;		/* CMX SI1 SYNC route register */
++	u32 cmxucr1;		/* CMX UCC1, UCC3 clock route register */
++	u32 cmxucr2;		/* CMX UCC5, UCC7 clock route register */
++	u32 cmxucr3;		/* CMX UCC2, UCC4 clock route register */
++	u32 cmxucr4;		/* CMX UCC6, UCC8 clock route register */
++	u32 cmxupcr;		/* CMX UPC clock route register */
++	u8 res0[0x1C];
++} qmx83xx_t;
++
++/*
++* QE Timers
++*/
++
++typedef struct qet83xx {
++	u8 gtcfr1;		/* Timer 1 and Timer 2 global configuration register */
++	u8 res0[0x3];
++	u8 gtcfr2;		/* Timer 3 and timer 4 global configuration register */
++	u8 res1[0xB];
++	u16 gtmdr1;		/* Timer 1 mode register */
++	u16 gtmdr2;		/* Timer 2 mode register */
++	u16 gtrfr1;		/* Timer 1 reference register */
++	u16 gtrfr2;		/* Timer 2 reference register */
++	u16 gtcpr1;		/* Timer 1 capture register */
++	u16 gtcpr2;		/* Timer 2 capture register */
++	u16 gtcnr1;		/* Timer 1 counter */
++	u16 gtcnr2;		/* Timer 2 counter */
++	u16 gtmdr3;		/* Timer 3 mode register */
++	u16 gtmdr4;		/* Timer 4 mode register */
++	u16 gtrfr3;		/* Timer 3 reference register */
++	u16 gtrfr4;		/* Timer 4 reference register */
++	u16 gtcpr3;		/* Timer 3 capture register */
++	u16 gtcpr4;		/* Timer 4 capture register */
++	u16 gtcnr3;		/* Timer 3 counter */
++	u16 gtcnr4;		/* Timer 4 counter */
++	u16 gtevr1;		/* Timer 1 event register */
++	u16 gtevr2;		/* Timer 2 event register */
++	u16 gtevr3;		/* Timer 3 event register */
++	u16 gtevr4;		/* Timer 4 event register */
++	u16 gtps;		/* Timer 1 prescale register */
++	u8 res2[0x46];
++} qet83xx_t;
++
++/*
++* spi
++*/
++
++typedef struct spi83xx {
++	u8 res0[0x20];
++	u32 spmode;		/* SPI mode register */
++	u8 res1[0x2];
++	u8 spie;		/* SPI event register */
++	u8 res2[0x1];
++	u8 res3[0x2];
++	u8 spim;		/* SPI mask register */
++	u8 res4[0x1];
++	u8 res5[0x1];
++	u8 spcom;		/* SPI command register	 */
++	u8 res6[0x2];
++	u32 spitd;		/* SPI transmit data register (cpu mode) */
++	u32 spird;		/* SPI receive data register (cpu mode) */
++	u8 res7[0x8];
++} spi83xx_t;
++
++/*
++* mcc
++*/
++
++typedef struct mcc83xx {
++	u32 mcce;		/* MCC event register */
++	u32 mccm;		/* MCC mask register */
++	u32 mccf;		/* MCC configuration register */
++	u32 merl;		/* MCC emergency request level register */
++	u8 res0[0xF0];
++} mcc83xx_t;
++
++/*
++* brg
++*/
++
++typedef struct brg83xx {
++	u32 brgc1;		/* BRG1 configuration register */
++	u32 brgc2;		/* BRG2 configuration register */
++	u32 brgc3;		/* BRG3 configuration register */
++	u32 brgc4;		/* BRG4 configuration register */
++	u32 brgc5;		/* BRG5 configuration register */
++	u32 brgc6;		/* BRG6 configuration register */
++	u32 brgc7;		/* BRG7 configuration register */
++	u32 brgc8;		/* BRG8 configuration register */
++	u32 brgc9;		/* BRG9 configuration register */
++	u32 brgc10;		/* BRG10 configuration register */
++	u32 brgc11;		/* BRG11 configuration register */
++	u32 brgc12;		/* BRG12 configuration register */
++	u32 brgc13;		/* BRG13 configuration register */
++	u32 brgc14;		/* BRG14 configuration register */
++	u32 brgc15;		/* BRG15 configuration register */
++	u32 brgc16;		/* BRG16 configuration register */
++	u8 res0[0x40];
++} brg83xx_t;
++
++/*
++* USB
++*/
++
++typedef struct usb83xx {
++	u8 usmod;		/* USB mode register */
++	u8 usadd;		/* USB address register */
++	u8 uscom;		/* USB command register */
++	u8 res0[0x1];
++	u16 usep0;		/* USB endpoint register 0 */
++	u16 usep1;		/* USB endpoint register 1 */
++	u16 usep2;		/* USB endpoint register 2 */
++	u16 usep3;		/* USB endpoint register 3 */
++	u8 res1[0x4];
++	u16 usber;		/* USB event register */
++	u8 res2[0x2];
++	u16 usbmr;		/* USB mask register */
++	u8 res3[0x1];
++	u8 usbs;		/* USB status register */
++	u32 ussft;		/* USB start of frame timer */
++	u8 res4[0x24];
++} usb83xx_t;
++
++/*
++* SI
++*/
++
++typedef struct si1_83xx {
++	u16 siamr1;		/* SI1 TDMA mode register */
++	u16 sibmr1;		/* SI1 TDMB mode register */
++	u16 sicmr1;		/* SI1 TDMC mode register */
++	u16 sidmr1;		/* SI1 TDMD mode register */
++	u8 siglmr1_h;		/* SI1 global mode register high */
++	u8 res0[0x1];
++	u8 sicmdr1_h;		/* SI1 command register high */
++	u8 res2[0x1];
++	u8 sistr1_h;		/* SI1 status register high */
++	u8 res3[0x1];
++	u16 sirsr1_h;		/* SI1 RAM shadow address register high */
++	u8 sitarc1;		/* SI1 RAM counter Tx TDMA */
++	u8 sitbrc1;		/* SI1 RAM counter Tx TDMB */
++	u8 sitcrc1;		/* SI1 RAM counter Tx TDMC */
++	u8 sitdrc1;		/* SI1 RAM counter Tx TDMD */
++	u8 sirarc1;		/* SI1 RAM counter Rx TDMA */
++	u8 sirbrc1;		/* SI1 RAM counter Rx TDMB */
++	u8 sircrc1;		/* SI1 RAM counter Rx TDMC */
++	u8 sirdrc1;		/* SI1 RAM counter Rx TDMD */
++	u8 res4[0x8];
++	u16 siemr1;		/* SI1 TDME mode register 16 bits */
++	u16 sifmr1;		/* SI1 TDMF mode register 16 bits */
++	u16 sigmr1;		/* SI1 TDMG mode register 16 bits */
++	u16 sihmr1;		/* SI1 TDMH mode register 16 bits */
++	u8 siglmg1_l;		/* SI1 global mode register low 8 bits */
++	u8 res5[0x1];
++	u8 sicmdr1_l;		/* SI1 command register low 8 bits */
++	u8 res6[0x1];
++	u8 sistr1_l;		/* SI1 status register low 8 bits */
++	u8 res7[0x1];
++	u16 sirsr1_l;		/* SI1 RAM shadow address register low 16 bits */
++	u8 siterc1;		/* SI1 RAM counter Tx TDME 8 bits */
++	u8 sitfrc1;		/* SI1 RAM counter Tx TDMF 8 bits */
++	u8 sitgrc1;		/* SI1 RAM counter Tx TDMG 8 bits */
++	u8 sithrc1;		/* SI1 RAM counter Tx TDMH 8 bits */
++	u8 sirerc1;		/* SI1 RAM counter Rx TDME 8 bits */
++	u8 sirfrc1;		/* SI1 RAM counter Rx TDMF 8 bits */
++	u8 sirgrc1;		/* SI1 RAM counter Rx TDMG 8 bits */
++	u8 sirhrc1;		/* SI1 RAM counter Rx TDMH 8 bits */
++	u8 res8[0x8];
++	u32 siml1;		/* SI1 multiframe limit register */
++	u8 siedm1;		/* SI1 extended diagnostic mode register */
++	u8 res9[0xBB];
++} si1_83xx_t;
++
++/*
++*  SI Routing Tables
++*/
++
++typedef struct sir83xx {
++	u8 tx[0x400];
++	u8 rx[0x400];
++	u8 res0[0x800];
++} sir83xx_t;
++
++/*
++* ucc
++*/
++
++typedef struct uslow {
++	u32 gumr_l;		/* UCCx general mode register (low) */
++	u32 gumr_h;		/* UCCx general mode register (high) */
++	u16 upsmr;		/* UCCx protocol-specific mode register */
++	u8 res0[0x2];
++	u16 utodr;		/* UCCx transmit on demand register */
++	u16 udsr;		/* UCCx data synchronization register */
++	u16 ucce;		/* UCCx event register */
++	u8 res1[0x2];
++	u16 uccm;		/* UCCx mask register */
++	u8 res2[0x1];
++	u8 uccs;		/* UCCx status register */
++	u8 res3[0x1E8];
++} uslow_t;
++
++typedef struct ufast {
++	u32 gumr;		/* UCCx general mode register */
++	u32 upsmr;		/* UCCx protocol-specific mode register	 */
++	u16 utodr;		/* UCCx transmit on demand register  */
++	u8 res0[0x2];
++	u16 udsr;		/* UCCx data synchronization register  */
++	u8 res1[0x2];
++	u32 ucce;		/* UCCx event register */
++	u32 uccm;		/* UCCx mask register.	*/
++	u8 uccs;		/* UCCx status register */
++	u8 res2[0x7];
++	u32 urfb;		/* UCC receive FIFO base  */
++	u16 urfs;		/* UCC receive FIFO size  */
++	u8 res3[0x2];
++	u16 urfet;		/* UCC receive FIFO emergency threshold	 */
++	u16 urfset;		/* UCC receive FIFO special emergency threshold	 */
++	u32 utfb;		/* UCC transmit FIFO base */
++	u16 utfs;		/* UCC transmit FIFO size  */
++	u8 res4[0x2];
++	u16 utfet;		/* UCC transmit FIFO emergency threshold */
++	u8 res5[0x2];
++	u16 utftt;		/* UCC transmit FIFO transmit threshold */
++	u8 res6[0x2];
++	u16 utpt;		/* UCC transmit polling timer */
++	u32 urtry;		/* UCC retry counter register */
++	u8 res7[0x4C];
++	u8 guemr;		/* UCC general extended mode register */
++	u8 res8[0x3];
++	u8 res9[0x6C];
++	u32 maccfg1;		/* Mac configuration register #1  */
++	u32 maccfg2;		/* Mac configuration register #2  */
++	u16 ipgifg;		/* Interframe gap register  */
++	u8 res10[0x2];
++	u32 hafdup;		/* Half-duplex register	 */
++	u8 res11[0xC];
++	u32 emtr;		/* Ethernet MAC test register  */
++	u32 miimcfg;		/* MII mgmt configuration register  */
++	u32 miimcom;		/* MII mgmt command register  */
++	u32 miimadd;		/* MII mgmt address register  */
++	u32 miimcon;		/* MII mgmt control register  */
++	u32 miistat;		/* MII mgmt status register */
++	u32 miimnd;		/* MII mgmt indication register */
++	u32 ifctl;		/* Interface control register  */
++	u32 ifstat;		/* Interface status register  */
++	u32 macstnaddr1;	/* Station address part 1 register */
++	u32 macstnaddr2;	/* Station address part 2 register */
++	u8 res12[0x8];
++	u32 uempr;		/* UCC Ethernet MAC parameter register */
++	u32 utbipa;		/* UCC TBI address */
++	u16 uescr;		/* UCC Ethernet statistics control register */
++	u8 res13[0x26];
++	u32 tx64;		/* Transmit and receive 64-byte frame counter */
++	u32 tx127;		/* Transmit and receive 65- to 127-byte frame counter */
++	u32 tx255;		/* Transmit and receive 128- to 255-byte frame counter */
++	u32 rx64;		/* Receive and receive 64-byte frame counter */
++	u32 rx127;		/* Receive and receive 65- to 127-byte frame counter */
++	u32 rx255;		/* Receive and receive 128- to 255-byte frame counter */
++	u32 txok;		/* Transmit good bytes counter */
++	u32 txcf;		/* Transmit control frame counter */
++	u32 tmca;		/* Transmit multicast control frame counter */
++	u32 tbca;		/* Transmit broadcast packet counter */
++	u32 rxfok;		/* Receive frame OK counter */
++	u32 rbyt;		/* Receive good and bad bytes counter */
++	u32 rxbok;		/* Receive bytes OK counter */
++	u32 rmca;		/* Receive multicast packet counter */
++	u32 rbca;		/* Receive broadcast packet counter */
++	u32 scar;		/* Statistics carry register */
++	u32 scam;		/* Statistics carry mask register */
++	u8 res14[0x3C];
++} ufast_t;
++
++typedef struct ucc83xx {
++	union {
++		uslow_t slow;
++		ufast_t fast;
++	};
++} ucc83xx_t;
++
++/*
++*  MultiPHY UTOPIA POS Controllers
++*/
++
++typedef struct upc83xx {
++	u32 upgcr;		/* UTOPIA/POS general configuration register  */
++#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
++#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
++#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
++#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing: */
++#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
++	u32 uplpa;		/* UTOPIA/POS last PHY address */
++	u32 uphec;		/* ATM HEC register */
++	u32 upuc;		/* UTOPIA/POS UCC configuration */
++	u32 updc1;		/* UTOPIA/POS device 1 configuration */
++	u32 updc2;		/* UTOPIA/POS device 2 configuration  */
++	u32 updc3;		/* UTOPIA/POS device 3 configuration */
++	u32 updc4;		/* UTOPIA/POS device 4 configuration  */
++	u32 upstpa;		/* UTOPIA/POS STPA threshold  */
++	u8 res0[0xC];
++	u32 updrs1_h;		/* UTOPIA/POS device 1 rate select  */
++	u32 updrs1_l;		/* UTOPIA/POS device 1 rate select  */
++	u32 updrs2_h;		/* UTOPIA/POS device 2 rate select  */
++	u32 updrs2_l;		/* UTOPIA/POS device 2 rate select */
++	u32 updrs3_h;		/* UTOPIA/POS device 3 rate select */
++	u32 updrs3_l;		/* UTOPIA/POS device 3 rate select */
++	u32 updrs4_h;		/* UTOPIA/POS device 4 rate select */
++	u32 updrs4_l;		/* UTOPIA/POS device 4 rate select */
++	u32 updrp1;		/* UTOPIA/POS device 1 receive priority low  */
++	u32 updrp2;		/* UTOPIA/POS device 2 receive priority low  */
++	u32 updrp3;		/* UTOPIA/POS device 3 receive priority low  */
++	u32 updrp4;		/* UTOPIA/POS device 4 receive priority low  */
++	u32 upde1;		/* UTOPIA/POS device 1 event */
++	u32 upde2;		/* UTOPIA/POS device 2 event */
++	u32 upde3;		/* UTOPIA/POS device 3 event */
++	u32 upde4;		/* UTOPIA/POS device 4 event */
++	u16 uprp1;
++	u16 uprp2;
++	u16 uprp3;
++	u16 uprp4;
++	u8 res1[0x8];
++	u16 uptirr1_0;		/* Device 1 transmit internal rate 0 */
++	u16 uptirr1_1;		/* Device 1 transmit internal rate 1 */
++	u16 uptirr1_2;		/* Device 1 transmit internal rate 2 */
++	u16 uptirr1_3;		/* Device 1 transmit internal rate 3 */
++	u16 uptirr2_0;		/* Device 2 transmit internal rate 0 */
++	u16 uptirr2_1;		/* Device 2 transmit internal rate 1 */
++	u16 uptirr2_2;		/* Device 2 transmit internal rate 2 */
++	u16 uptirr2_3;		/* Device 2 transmit internal rate 3 */
++	u16 uptirr3_0;		/* Device 3 transmit internal rate 0 */
++	u16 uptirr3_1;		/* Device 3 transmit internal rate 1 */
++	u16 uptirr3_2;		/* Device 3 transmit internal rate 2 */
++	u16 uptirr3_3;		/* Device 3 transmit internal rate 3 */
++	u16 uptirr4_0;		/* Device 4 transmit internal rate 0 */
++	u16 uptirr4_1;		/* Device 4 transmit internal rate 1 */
++	u16 uptirr4_2;		/* Device 4 transmit internal rate 2 */
++	u16 uptirr4_3;		/* Device 4 transmit internal rate 3 */
++	u32 uper1;		/* Device 1 port enable register */
++	u32 uper2;		/* Device 2 port enable register */
++	u32 uper3;		/* Device 3 port enable register */
++	u32 uper4;		/* Device 4 port enable register */
++	u8 res2[0x150];
++} upc83xx_t;
++
++/*
++* SDMA
++*/
++
++typedef struct sdma83xx {
++	u32 sdsr;		/* Serial DMA status register */
++	u32 sdmr;		/* Serial DMA mode register */
++	u32 sdtr1;		/* SDMA system bus threshold register */
++	u32 sdtr2;		/* SDMA secondary bus threshold register */
++	u32 sdhy1;		/* SDMA system bus hysteresis register */
++	u32 sdhy2;		/* SDMA secondary bus hysteresis register */
++	u32 sdta1;		/* SDMA system bus address register */
++	u32 sdta2;		/* SDMA secondary bus address register */
++	u32 sdtm1;		/* SDMA system bus MSNUM register */
++	u32 sdtm2;		/* SDMA secondary bus MSNUM register */
++	u8 res0[0x10];
++	u32 sdaqr;		/* SDMA address bus qualify register */
++	u32 sdaqmr;		/* SDMA address bus qualify mask register */
++	u8 res1[0x4];
++	u32 sdwbcr;		/* SDMA CAM entries base register */
++	u8 res2[0x38];
++} sdma83xx_t;
++
++/*
++* Debug Space
++*/
++
++typedef struct dbg83xx {
++	u32 bpdcr;		/* Breakpoint debug command register */
++	u32 bpdsr;		/* Breakpoint debug status register */
++	u32 bpdmr;		/* Breakpoint debug mask register */
++	u32 bprmrr0;		/* Breakpoint request mode risc register 0 */
++	u32 bprmrr1;		/* Breakpoint request mode risc register 1 */
++	u8 res0[0x8];
++	u32 bprmtr0;		/* Breakpoint request mode trb register 0 */
++	u32 bprmtr1;		/* Breakpoint request mode trb register 1 */
++	u8 res1[0x8];
++	u32 bprmir;		/* Breakpoint request mode immediate register */
++	u32 bprmsr;		/* Breakpoint request mode serial register */
++	u32 bpemr;		/* Breakpoint exit mode register */
++	u8 res2[0x48];
++} dbg83xx_t;
++
++/*
++*  RISC Special Registers (Trap and Breakpoint)
++*/
++
++typedef struct rsp83xx {
++	u8 fixme[0x100];
++} rsp83xx_t;
++#endif
+ 
+ typedef struct immap {
+-	sysconf8349_t sysconf; /* System configuration */
+-	wdt8349_t     wdt;     /* Watch Dog Timer (WDT) Registers */
+-	rtclk8349_t   rtc;     /* Real Time Clock Module Registers */
+-	rtclk8349_t   pit;     /* Periodic Interval Timer */
+-	gtm8349_t     gtm[2];  /* Global Timers Module */
+-	ipic8349_t    ipic;    /* Integrated Programmable Interrupt Controller */
+-	arbiter8349_t arbiter; /* System Arbiter Registers */
+-	reset8349_t   reset;   /* Reset Module */
+-	clk8349_t     clk;     /* System Clock Module */
+-	pmc8349_t     pmc;     /* Power Management Control Module */
+-	gpio8349_t    pgio[2]; /* general purpose I/O module */
++	sysconf83xx_t sysconf;	/* System configuration */
++	wdt83xx_t wdt;		/* Watch Dog Timer (WDT) Registers */
++	rtclk83xx_t rtc;	/* Real Time Clock Module Registers */
++	rtclk83xx_t pit;	/* Periodic Interval Timer */
++	gtm83xx_t gtm[2];	/* Global Timers Module */
++	ipic83xx_t ipic;	/* Integrated Programmable Interrupt Controller */
++	arbiter83xx_t arbiter;	/* System Arbiter Registers */
++	reset83xx_t reset;	/* Reset Module */
++	clk83xx_t clk;		/* System Clock Module */
++	pmc83xx_t pmc;		/* Power Management Control Module */
++#if defined (CONFIG_MPC8349)
++	gpio83xx_t pgio[2];	/* general purpose I/O module */
++#elif defined (CONFIG_MPC8360)
++	qepi83xx_t qepi;	/* QE Ports Interrupts Registers */
++#endif
+ 	u8 res0[0x200];
++#if defined (CONFIG_MPC8360)
++	u8 DLL_LBDDR[0x100];
++#endif
+ 	u8 DDL_DDR[0x100];
+ 	u8 DDL_LBIU[0x100];
++#if defined (CONFIG_MPC8349)
+ 	u8 res1[0xE00];
+-	ddr8349_t     ddr;     /* DDR Memory Controller Memory */
+-	i2c_t     i2c[2];      /* I2C1 Controller */
++#elif defined (CONFIG_MPC8360)
++	u8 res1[0x200];
++	gpio83xx_t gpio;	/* General purpose I/O module */
++	qesba83xx_t qesba;	/* QE Secondary Bus Access Windows */
++#endif
++	ddr83xx_t ddr;		/* DDR Memory Controller Memory */
++	fsl_i2c_t i2c[2];	/* I2C Controllers */
+ 	u8 res2[0x1300];
+-	duart8349_t   duart[2];/* DUART */
++	duart83xx_t duart[2];	/* DUART */
++#if defined (CONFIG_MPC8349)
+ 	u8 res3[0x900];
+-	lbus8349_t    lbus;    /* Local Bus Controller Registers */
++	lbus83xx_t lbus;	/* Local Bus Controller Registers */
+ 	u8 res4[0x1000];
+-	spi8349_t     spi;     /* Serial Peripheral Interface */
++	spi83xx_t spi;		/* Serial Peripheral Interface */
+ 	u8 res5[0xF00];
+-	dma8349_t     dma;     /* DMA */
+-	pciconf8349_t pci_conf[2];  /* PCI Software Configuration Registers */
+-	ios8349_t     ios;     /* Sequencer */
+-	pcictrl8349_t pci_ctrl[2];  /* PCI Controller Control and Status Registers */
++#elif defined (CONFIG_MPC8360)
++	u8 res3[0x900];
++	lbus83xx_t lbus;	/* Local Bus Controller */
++	u8 res4[0x2000];
++#endif
++	dma83xx_t dma;		/* DMA */
++#if defined (CONFIG_MPC8349)
++	pciconf83xx_t pci_conf[2];	/* PCI Software Configuration Registers */
++	ios83xx_t ios;		/* Sequencer */
++	pcictrl83xx_t pci_ctrl[2];	/* PCI Controller Control and Status Registers */
+ 	u8 res6[0x19900];
+-	usb8349_t     usb;
+-	tsec8349_t    tsec[2];
++	usb83xx_t usb;
++	tsec83xx_t tsec[2];
+ 	u8 res7[0xA000];
+-	security8349_t security;
++	security83xx_t security;
++#elif defined (CONFIG_MPC8360)
++	pciconf83xx_t pci_conf[1];	/* PCI Software Configuration Registers */
++	u8 res_5[128];
++	ios83xx_t ios;		/* Sequencer (IOS) */
++	pcictrl83xx_t pci_ctrl[1];	/* PCI Controller Control and Status Registers */
++	u8 res6[0x4A00];
++	ddr83xx_t ddr_secondary;	/* Secondary DDR Memory Controller Memory Map */
++	u8 res7[0x22000];
++	security83xx_t security;
++	u8 res8[0xC0000];
++	iram83xx_t iram;	/* IRAM */
++	irq83xx_t irq;		/* Interrupt Controller */
++	cp83xx_t cp;		/* Communications Processor */
++	qmx83xx_t qmx;		/* QE Multiplexer */
++	qet83xx_t qet;		/* QE Timers */
++	spi83xx_t spi[0x2];	/* spi	*/
++	mcc83xx_t mcc;		/* mcc */
++	brg83xx_t brg;		/* brg */
++	usb83xx_t usb;		/* USB */
++	si1_83xx_t si1;		/* SI */
++	u8 res9[0x800];
++	sir83xx_t sir;		/* SI Routing Tables  */
++	ucc83xx_t ucc1;		/* ucc1 */
++	ucc83xx_t ucc3;		/* ucc3 */
++	ucc83xx_t ucc5;		/* ucc5 */
++	ucc83xx_t ucc7;		/* ucc7 */
++	u8 res10[0x600];
++	upc83xx_t upc1;		/* MultiPHY UTOPIA POS Controller 1 */
++	ucc83xx_t ucc2;		/* ucc2 */
++	ucc83xx_t ucc4;		/* ucc4 */
++	ucc83xx_t ucc6;		/* ucc6 */
++	ucc83xx_t ucc8;		/* ucc8 */
++	u8 res11[0x600];
++	upc83xx_t upc2;		/* MultiPHY UTOPIA POS Controller 2 */
++	sdma83xx_t sdma;	/* SDMA */
++	dbg83xx_t dbg;		/* Debug Space */
++	rsp83xx_t rsp[0x2];	/* RISC Special Registers (Trap and Breakpoint) */
++	u8 res12[0x300];
++	u8 res13[0x3A00];
++	u8 res14[0x8000];	/* 0x108000 -  0x110000 */
++	u8 res15[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
++	u8 res16[0x24000];	/* 0x11C000 -  0x140000 */
++	u8 res17[0xC0000];	/* 0x140000 -  0x200000 */
++#endif
+ } immap_t;
+ 
+-#endif /* __IMMAP_8349__ */
++#endif				/* __IMMAP_83xx__ */
+diff -Naupr u-boot-1.1.6/include/asm-ppc/immap_qe.h u-boot-1.1.6-fsl-1/include/asm-ppc/immap_qe.h
+--- u-boot-1.1.6/include/asm-ppc/immap_qe.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/immap_qe.h	2006-11-10 11:24:29.000000000 -0600
+@@ -0,0 +1,550 @@
++/*
++ * QUICC Engine (QE) Internal Memory Map.
++ * The Internal Memory Map for devices with QE on them. This
++ * is the superset of all QE devices (8360, etc.).
++ *
++ * Copyright (c) 2006 Freescale Semiconductor, Inc.
++ * Author: Shlomi Gridih <gridish@freescale.com>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __IMMAP_QE_H__
++#define __IMMAP_QE_H__
++
++/* QE I-RAM
++*/
++typedef struct qe_iram {
++	u32 iadd;		/* I-RAM Address Register */
++	u32 idata;		/* I-RAM Data Register    */
++	u8 res0[0x78];
++} __attribute__ ((packed)) qe_iram_t;
++
++/* QE Interrupt Controller
++*/
++typedef struct qe_ic {
++	u32 qicr;
++	u32 qivec;
++	u32 qripnr;
++	u32 qipnr;
++	u32 qipxcc;
++	u32 qipycc;
++	u32 qipwcc;
++	u32 qipzcc;
++	u32 qimr;
++	u32 qrimr;
++	u32 qicnr;
++	u8 res0[0x4];
++	u32 qiprta;
++	u32 qiprtb;
++	u8 res1[0x4];
++	u32 qricr;
++	u8 res2[0x20];
++	u32 qhivec;
++	u8 res3[0x1C];
++} __attribute__ ((packed)) qe_ic_t;
++
++/* Communications Processor
++*/
++typedef struct cp_qe {
++	u32 cecr;		/* QE command register */
++	u32 ceccr;		/* QE controller configuration register */
++	u32 cecdr;		/* QE command data register */
++	u8 res0[0xA];
++	u16 ceter;		/* QE timer event register */
++	u8 res1[0x2];
++	u16 cetmr;		/* QE timers mask register */
++	u32 cetscr;		/* QE time-stamp timer control register */
++	u32 cetsr1;		/* QE time-stamp register 1 */
++	u32 cetsr2;		/* QE time-stamp register 2 */
++	u8 res2[0x8];
++	u32 cevter;		/* QE virtual tasks event register */
++	u32 cevtmr;		/* QE virtual tasks mask register */
++	u16 cercr;		/* QE RAM control register */
++	u8 res3[0x2];
++	u8 res4[0x24];
++	u16 ceexe1;		/* QE external request 1 event register */
++	u8 res5[0x2];
++	u16 ceexm1;		/* QE external request 1 mask register */
++	u8 res6[0x2];
++	u16 ceexe2;		/* QE external request 2 event register */
++	u8 res7[0x2];
++	u16 ceexm2;		/* QE external request 2 mask register */
++	u8 res8[0x2];
++	u16 ceexe3;		/* QE external request 3 event register */
++	u8 res9[0x2];
++	u16 ceexm3;		/* QE external request 3 mask register */
++	u8 res10[0x2];
++	u16 ceexe4;		/* QE external request 4 event register */
++	u8 res11[0x2];
++	u16 ceexm4;		/* QE external request 4 mask register */
++	u8 res12[0x2];
++	u8 res13[0x280];
++} __attribute__ ((packed)) cp_qe_t;
++
++/* QE Multiplexer
++*/
++typedef struct qe_mux {
++	u32 cmxgcr;		/* CMX general clock route register    */
++	u32 cmxsi1cr_l;		/* CMX SI1 clock route low register    */
++	u32 cmxsi1cr_h;		/* CMX SI1 clock route high register   */
++	u32 cmxsi1syr;		/* CMX SI1 SYNC route register         */
++	u32 cmxucr1;		/* CMX UCC1, UCC3 clock route register */
++	u32 cmxucr2;		/* CMX UCC5, UCC7 clock route register */
++	u32 cmxucr3;		/* CMX UCC2, UCC4 clock route register */
++	u32 cmxucr4;		/* CMX UCC6, UCC8 clock route register */
++	u32 cmxupcr;		/* CMX UPC clock route register        */
++	u8 res0[0x1C];
++} __attribute__ ((packed)) qe_mux_t;
++
++/* QE Timers
++*/
++typedef struct qe_timers {
++	u8 gtcfr1;		/* Timer 1 2 global configuration register */
++	u8 res0[0x3];
++	u8 gtcfr2;		/* Timer 3 4 global configuration register */
++	u8 res1[0xB];
++	u16 gtmdr1;		/* Timer 1 mode register */
++	u16 gtmdr2;		/* Timer 2 mode register */
++	u16 gtrfr1;		/* Timer 1 reference register */
++	u16 gtrfr2;		/* Timer 2 reference register */
++	u16 gtcpr1;		/* Timer 1 capture register */
++	u16 gtcpr2;		/* Timer 2 capture register */
++	u16 gtcnr1;		/* Timer 1 counter */
++	u16 gtcnr2;		/* Timer 2 counter */
++	u16 gtmdr3;		/* Timer 3 mode register */
++	u16 gtmdr4;		/* Timer 4 mode register */
++	u16 gtrfr3;		/* Timer 3 reference register */
++	u16 gtrfr4;		/* Timer 4 reference register */
++	u16 gtcpr3;		/* Timer 3 capture register */
++	u16 gtcpr4;		/* Timer 4 capture register */
++	u16 gtcnr3;		/* Timer 3 counter */
++	u16 gtcnr4;		/* Timer 4 counter */
++	u16 gtevr1;		/* Timer 1 event register */
++	u16 gtevr2;		/* Timer 2 event register */
++	u16 gtevr3;		/* Timer 3 event register */
++	u16 gtevr4;		/* Timer 4 event register */
++	u16 gtps;		/* Timer 1 prescale register */
++	u8 res2[0x46];
++} __attribute__ ((packed)) qe_timers_t;
++
++/* BRG
++*/
++typedef struct qe_brg {
++	u32 brgc1;		/* BRG1 configuration register  */
++	u32 brgc2;		/* BRG2 configuration register  */
++	u32 brgc3;		/* BRG3 configuration register  */
++	u32 brgc4;		/* BRG4 configuration register  */
++	u32 brgc5;		/* BRG5 configuration register  */
++	u32 brgc6;		/* BRG6 configuration register  */
++	u32 brgc7;		/* BRG7 configuration register  */
++	u32 brgc8;		/* BRG8 configuration register  */
++	u32 brgc9;		/* BRG9 configuration register  */
++	u32 brgc10;		/* BRG10 configuration register */
++	u32 brgc11;		/* BRG11 configuration register */
++	u32 brgc12;		/* BRG12 configuration register */
++	u32 brgc13;		/* BRG13 configuration register */
++	u32 brgc14;		/* BRG14 configuration register */
++	u32 brgc15;		/* BRG15 configuration register */
++	u32 brgc16;		/* BRG16 configuration register */
++	u8 res0[0x40];
++} __attribute__ ((packed)) qe_brg_t;
++
++/* SPI
++*/
++typedef struct spi {
++	u8 res0[0x20];
++	u32 spmode;		/* SPI mode register */
++	u8 res1[0x2];
++	u8 spie;		/* SPI event register */
++	u8 res2[0x1];
++	u8 res3[0x2];
++	u8 spim;		/* SPI mask register */
++	u8 res4[0x1];
++	u8 res5[0x1];
++	u8 spcom;		/* SPI command register  */
++	u8 res6[0x2];
++	u32 spitd;		/* SPI transmit data register (cpu mode) */
++	u32 spird;		/* SPI receive data register (cpu mode) */
++	u8 res7[0x8];
++} __attribute__ ((packed)) spi_t;
++
++/* SI
++*/
++typedef struct si1 {
++	u16 siamr1;		/* SI1 TDMA mode register */
++	u16 sibmr1;		/* SI1 TDMB mode register */
++	u16 sicmr1;		/* SI1 TDMC mode register */
++	u16 sidmr1;		/* SI1 TDMD mode register */
++	u8 siglmr1_h;		/* SI1 global mode register high */
++	u8 res0[0x1];
++	u8 sicmdr1_h;		/* SI1 command register high */
++	u8 res2[0x1];
++	u8 sistr1_h;		/* SI1 status register high */
++	u8 res3[0x1];
++	u16 sirsr1_h;		/* SI1 RAM shadow address register high */
++	u8 sitarc1;		/* SI1 RAM counter Tx TDMA */
++	u8 sitbrc1;		/* SI1 RAM counter Tx TDMB */
++	u8 sitcrc1;		/* SI1 RAM counter Tx TDMC */
++	u8 sitdrc1;		/* SI1 RAM counter Tx TDMD */
++	u8 sirarc1;		/* SI1 RAM counter Rx TDMA */
++	u8 sirbrc1;		/* SI1 RAM counter Rx TDMB */
++	u8 sircrc1;		/* SI1 RAM counter Rx TDMC */
++	u8 sirdrc1;		/* SI1 RAM counter Rx TDMD */
++	u8 res4[0x8];
++	u16 siemr1;		/* SI1 TDME mode register 16 bits */
++	u16 sifmr1;		/* SI1 TDMF mode register 16 bits */
++	u16 sigmr1;		/* SI1 TDMG mode register 16 bits */
++	u16 sihmr1;		/* SI1 TDMH mode register 16 bits */
++	u8 siglmg1_l;		/* SI1 global mode register low 8 bits */
++	u8 res5[0x1];
++	u8 sicmdr1_l;		/* SI1 command register low 8 bits */
++	u8 res6[0x1];
++	u8 sistr1_l;		/* SI1 status register low 8 bits */
++	u8 res7[0x1];
++	u16 sirsr1_l;		/* SI1 RAM shadow address register low 16 bits */
++	u8 siterc1;		/* SI1 RAM counter Tx TDME 8 bits */
++	u8 sitfrc1;		/* SI1 RAM counter Tx TDMF 8 bits */
++	u8 sitgrc1;		/* SI1 RAM counter Tx TDMG 8 bits */
++	u8 sithrc1;		/* SI1 RAM counter Tx TDMH 8 bits */
++	u8 sirerc1;		/* SI1 RAM counter Rx TDME 8 bits */
++	u8 sirfrc1;		/* SI1 RAM counter Rx TDMF 8 bits */
++	u8 sirgrc1;		/* SI1 RAM counter Rx TDMG 8 bits */
++	u8 sirhrc1;		/* SI1 RAM counter Rx TDMH 8 bits */
++	u8 res8[0x8];
++	u32 siml1;		/* SI1 multiframe limit register */
++	u8 siedm1;		/* SI1 extended diagnostic mode register */
++	u8 res9[0xBB];
++} __attribute__ ((packed)) si1_t;
++
++/* SI Routing Tables
++*/
++typedef struct sir {
++	u8 tx[0x400];
++	u8 rx[0x400];
++	u8 res0[0x800];
++} __attribute__ ((packed)) sir_t;
++
++/* USB Controller.
++*/
++typedef struct usb_ctlr {
++	u8 usb_usmod;
++	u8 usb_usadr;
++	u8 usb_uscom;
++	u8 res1[1];
++	u16 usb_usep1;
++	u16 usb_usep2;
++	u16 usb_usep3;
++	u16 usb_usep4;
++	u8 res2[4];
++	u16 usb_usber;
++	u8 res3[2];
++	u16 usb_usbmr;
++	u8 res4[1];
++	u8 usb_usbs;
++	u16 usb_ussft;
++	u8 res5[2];
++	u16 usb_usfrn;
++	u8 res6[0x22];
++} __attribute__ ((packed)) usb_t;
++
++/* MCC
++*/
++typedef struct mcc {
++	u32 mcce;		/* MCC event register */
++	u32 mccm;		/* MCC mask register */
++	u32 mccf;		/* MCC configuration register */
++	u32 merl;		/* MCC emergency request level register */
++	u8 res0[0xF0];
++} __attribute__ ((packed)) mcc_t;
++
++/* QE UCC Slow
++*/
++typedef struct ucc_slow {
++	u32 gumr_l;		/* UCCx general mode register (low) */
++	u32 gumr_h;		/* UCCx general mode register (high) */
++	u16 upsmr;		/* UCCx protocol-specific mode register */
++	u8 res0[0x2];
++	u16 utodr;		/* UCCx transmit on demand register */
++	u16 udsr;		/* UCCx data synchronization register */
++	u16 ucce;		/* UCCx event register */
++	u8 res1[0x2];
++	u16 uccm;		/* UCCx mask register */
++	u8 res2[0x1];
++	u8 uccs;		/* UCCx status register */
++	u8 res3[0x24];
++	u16 utpt;
++	u8 guemr;		/* UCC general extended mode register */
++	u8 res4[0x200 - 0x091];
++} __attribute__ ((packed)) ucc_slow_t;
++
++typedef struct ucc_ethernet {
++	u32 maccfg1;		/* mac configuration reg. 1            */
++	u32 maccfg2;		/* mac configuration reg. 2            */
++	u32 ipgifg;		/* interframe gap reg.                 */
++	u32 hafdup;		/* half-duplex reg.                    */
++	u8 res1[0x10];
++	u32 miimcfg;		/* MII management configuration reg    */
++	u32 miimcom;		/* MII management command reg          */
++	u32 miimadd;		/* MII management address reg          */
++	u32 miimcon;		/* MII management control reg          */
++	u32 miimstat;		/* MII management status reg           */
++	u32 miimind;		/* MII management indication reg       */
++	u32 ifctl;		/* interface control reg               */
++	u32 ifstat;		/* interface statux reg                */
++	u32 macstnaddr1;	/* mac station address part 1 reg      */
++	u32 macstnaddr2;	/* mac station address part 2 reg      */
++	u8 res2[0x8];
++	u32 uempr;		/* UCC Ethernet Mac parameter reg      */
++	u32 utbipar;		/* UCC tbi address reg                 */
++	u16 uescr;		/* UCC Ethernet statistics control reg */
++	u8 res3[0x180 - 0x15A];
++	u32 tx64;		/* Total number of frames (including bad
++				 * frames) transmitted that were exactly
++				 * of the minimal length (64 for un tagged,
++				 * 68 for tagged, or with length exactly
++				 * equal to the parameter MINLength */
++	u32 tx127;		/* Total number of frames (including bad
++				 * frames) transmitted that were between
++				 * MINLength (Including FCS length==4)
++				 * and 127 octets */
++	u32 tx255;		/* Total number of frames (including bad
++				 * frames) transmitted that were between
++				 * 128 (Including FCS length==4) and 255
++				 * octets */
++	u32 rx64;		/* Total number of frames received including
++				 * bad frames that were exactly of the
++				 * mninimal length (64 bytes) */
++	u32 rx127;		/* Total number of frames (including bad
++				 * frames) received that were between
++				 * MINLength (Including FCS length==4)
++				 * and 127 octets */
++	u32 rx255;		/* Total number of frames (including
++				 * bad frames) received that were between
++				 * 128 (Including FCS length==4) and 255
++				 * octets */
++	u32 txok;		/* Total number of octets residing in frames
++				 * that where involved in succesfull
++				 * transmission */
++	u16 txcf;		/* Total number of PAUSE control frames
++				 *  transmitted by this MAC */
++	u8 res4[0x2];
++	u32 tmca;		/* Total number of frames that were transmitted
++				 * succesfully with the group address bit set
++				 * that are not broadcast frames */
++	u32 tbca;		/* Total number of frames transmitted
++				 * succesfully that had destination address
++				 * field equal to the broadcast address */
++	u32 rxfok;		/* Total number of frames received OK */
++	u32 rxbok;		/* Total number of octets received OK */
++	u32 rbyt;		/* Total number of octets received including
++				 * octets in bad frames. Must be implemented
++				 * in HW because it includes octets in frames
++				 * that never even reach the UCC */
++	u32 rmca;		/* Total number of frames that were received
++				 * succesfully with the group address bit set
++				 * that are not broadcast frames */
++	u32 rbca;		/* Total number of frames received succesfully
++				 * that had destination address equal to the
++				 * broadcast address */
++	u32 scar;		/* Statistics carry register */
++	u32 scam;		/* Statistics caryy mask register */
++	u8 res5[0x200 - 0x1c4];
++} __attribute__ ((packed)) uec_t;
++
++/* QE UCC Fast
++*/
++typedef struct ucc_fast {
++	u32 gumr;		/* UCCx general mode register */
++	u32 upsmr;		/* UCCx protocol-specific mode register  */
++	u16 utodr;		/* UCCx transmit on demand register  */
++	u8 res0[0x2];
++	u16 udsr;		/* UCCx data synchronization register  */
++	u8 res1[0x2];
++	u32 ucce;		/* UCCx event register */
++	u32 uccm;		/* UCCx mask register.  */
++	u8 uccs;		/* UCCx status register */
++	u8 res2[0x7];
++	u32 urfb;		/* UCC receive FIFO base */
++	u16 urfs;		/* UCC receive FIFO size */
++	u8 res3[0x2];
++	u16 urfet;		/* UCC receive FIFO emergency threshold */
++	u16 urfset;		/* UCC receive FIFO special emergency
++				 * threshold */
++	u32 utfb;		/* UCC transmit FIFO base */
++	u16 utfs;		/* UCC transmit FIFO size */
++	u8 res4[0x2];
++	u16 utfet;		/* UCC transmit FIFO emergency threshold */
++	u8 res5[0x2];
++	u16 utftt;		/* UCC transmit FIFO transmit threshold */
++	u8 res6[0x2];
++	u16 utpt;		/* UCC transmit polling timer */
++	u8 res7[0x2];
++	u32 urtry;		/* UCC retry counter register */
++	u8 res8[0x4C];
++	u8 guemr;		/* UCC general extended mode register */
++	u8 res9[0x100 - 0x091];
++	uec_t ucc_eth;
++} __attribute__ ((packed)) ucc_fast_t;
++
++/* QE UCC
++*/
++typedef struct ucc_common {
++	u8 res1[0x90];
++	u8 guemr;
++	u8 res2[0x200 - 0x091];
++} __attribute__ ((packed)) ucc_common_t;
++
++typedef struct ucc {
++	union {
++		ucc_slow_t slow;
++		ucc_fast_t fast;
++		ucc_common_t common;
++	};
++} __attribute__ ((packed)) ucc_t;
++
++/* MultiPHY UTOPIA POS Controllers (UPC)
++*/
++typedef struct upc {
++	u32 upgcr;		/* UTOPIA/POS general configuration register */
++	u32 uplpa;		/* UTOPIA/POS last PHY address */
++	u32 uphec;		/* ATM HEC register */
++	u32 upuc;		/* UTOPIA/POS UCC configuration */
++	u32 updc1;		/* UTOPIA/POS device 1 configuration */
++	u32 updc2;		/* UTOPIA/POS device 2 configuration  */
++	u32 updc3;		/* UTOPIA/POS device 3 configuration */
++	u32 updc4;		/* UTOPIA/POS device 4 configuration  */
++	u32 upstpa;		/* UTOPIA/POS STPA threshold  */
++	u8 res0[0xC];
++	u32 updrs1_h;		/* UTOPIA/POS device 1 rate select  */
++	u32 updrs1_l;		/* UTOPIA/POS device 1 rate select  */
++	u32 updrs2_h;		/* UTOPIA/POS device 2 rate select  */
++	u32 updrs2_l;		/* UTOPIA/POS device 2 rate select */
++	u32 updrs3_h;		/* UTOPIA/POS device 3 rate select */
++	u32 updrs3_l;		/* UTOPIA/POS device 3 rate select */
++	u32 updrs4_h;		/* UTOPIA/POS device 4 rate select */
++	u32 updrs4_l;		/* UTOPIA/POS device 4 rate select */
++	u32 updrp1;		/* UTOPIA/POS device 1 receive priority low  */
++	u32 updrp2;		/* UTOPIA/POS device 2 receive priority low  */
++	u32 updrp3;		/* UTOPIA/POS device 3 receive priority low  */
++	u32 updrp4;		/* UTOPIA/POS device 4 receive priority low  */
++	u32 upde1;		/* UTOPIA/POS device 1 event */
++	u32 upde2;		/* UTOPIA/POS device 2 event */
++	u32 upde3;		/* UTOPIA/POS device 3 event */
++	u32 upde4;		/* UTOPIA/POS device 4 event */
++	u16 uprp1;
++	u16 uprp2;
++	u16 uprp3;
++	u16 uprp4;
++	u8 res1[0x8];
++	u16 uptirr1_0;		/* Device 1 transmit internal rate 0 */
++	u16 uptirr1_1;		/* Device 1 transmit internal rate 1 */
++	u16 uptirr1_2;		/* Device 1 transmit internal rate 2 */
++	u16 uptirr1_3;		/* Device 1 transmit internal rate 3 */
++	u16 uptirr2_0;		/* Device 2 transmit internal rate 0 */
++	u16 uptirr2_1;		/* Device 2 transmit internal rate 1 */
++	u16 uptirr2_2;		/* Device 2 transmit internal rate 2 */
++	u16 uptirr2_3;		/* Device 2 transmit internal rate 3 */
++	u16 uptirr3_0;		/* Device 3 transmit internal rate 0 */
++	u16 uptirr3_1;		/* Device 3 transmit internal rate 1 */
++	u16 uptirr3_2;		/* Device 3 transmit internal rate 2 */
++	u16 uptirr3_3;		/* Device 3 transmit internal rate 3 */
++	u16 uptirr4_0;		/* Device 4 transmit internal rate 0 */
++	u16 uptirr4_1;		/* Device 4 transmit internal rate 1 */
++	u16 uptirr4_2;		/* Device 4 transmit internal rate 2 */
++	u16 uptirr4_3;		/* Device 4 transmit internal rate 3 */
++	u32 uper1;		/* Device 1 port enable register */
++	u32 uper2;		/* Device 2 port enable register */
++	u32 uper3;		/* Device 3 port enable register */
++	u32 uper4;		/* Device 4 port enable register */
++	u8 res2[0x150];
++} __attribute__ ((packed)) upc_t;
++
++/* SDMA
++*/
++typedef struct sdma {
++	u32 sdsr;		/* Serial DMA status register */
++	u32 sdmr;		/* Serial DMA mode register */
++	u32 sdtr1;		/* SDMA system bus threshold register */
++	u32 sdtr2;		/* SDMA secondary bus threshold register */
++	u32 sdhy1;		/* SDMA system bus hysteresis register */
++	u32 sdhy2;		/* SDMA secondary bus hysteresis register */
++	u32 sdta1;		/* SDMA system bus address register */
++	u32 sdta2;		/* SDMA secondary bus address register */
++	u32 sdtm1;		/* SDMA system bus MSNUM register */
++	u32 sdtm2;		/* SDMA secondary bus MSNUM register */
++	u8 res0[0x10];
++	u32 sdaqr;		/* SDMA address bus qualify register */
++	u32 sdaqmr;		/* SDMA address bus qualify mask register */
++	u8 res1[0x4];
++	u32 sdwbcr;		/* SDMA CAM entries base register */
++	u8 res2[0x38];
++} __attribute__ ((packed)) sdma_t;
++
++/* Debug Space
++*/
++typedef struct dbg {
++	u32 bpdcr;		/* Breakpoint debug command register */
++	u32 bpdsr;		/* Breakpoint debug status register */
++	u32 bpdmr;		/* Breakpoint debug mask register */
++	u32 bprmrr0;		/* Breakpoint request mode risc register 0 */
++	u32 bprmrr1;		/* Breakpoint request mode risc register 1 */
++	u8 res0[0x8];
++	u32 bprmtr0;		/* Breakpoint request mode trb register 0 */
++	u32 bprmtr1;		/* Breakpoint request mode trb register 1 */
++	u8 res1[0x8];
++	u32 bprmir;		/* Breakpoint request mode immediate register */
++	u32 bprmsr;		/* Breakpoint request mode serial register */
++	u32 bpemr;		/* Breakpoint exit mode register */
++	u8 res2[0x48];
++} __attribute__ ((packed)) dbg_t;
++
++/* RISC Special Registers (Trap and Breakpoint)
++*/
++typedef struct rsp {
++	u8 fixme[0x100];
++} __attribute__ ((packed)) rsp_t;
++
++typedef struct qe_immap {
++	qe_iram_t iram;		/* I-RAM */
++	qe_ic_t ic;		/* Interrupt Controller */
++	cp_qe_t cp;		/* Communications Processor */
++	qe_mux_t qmx;		/* QE Multiplexer */
++	qe_timers_t qet;	/* QE Timers */
++	spi_t spi[0x2];		/* spi  */
++	mcc_t mcc;		/* mcc */
++	qe_brg_t brg;		/* brg */
++	usb_t usb;		/* USB */
++	si1_t si1;		/* SI */
++	u8 res11[0x800];
++	sir_t sir;		/* SI Routing Tables  */
++	ucc_t ucc1;		/* ucc1 */
++	ucc_t ucc3;		/* ucc3 */
++	ucc_t ucc5;		/* ucc5 */
++	ucc_t ucc7;		/* ucc7 */
++	u8 res12[0x600];
++	upc_t upc1;		/* MultiPHY UTOPIA POS Controller 1 */
++	ucc_t ucc2;		/* ucc2 */
++	ucc_t ucc4;		/* ucc4 */
++	ucc_t ucc6;		/* ucc6 */
++	ucc_t ucc8;		/* ucc8 */
++	u8 res13[0x600];
++	upc_t upc2;		/* MultiPHY UTOPIA POS Controller 2 */
++	sdma_t sdma;		/* SDMA */
++	dbg_t dbg;		/* Debug Space */
++	rsp_t rsp[0x2];		/* RISC Special Registers
++				 * (Trap and Breakpoint) */
++	u8 res14[0x300];
++	u8 res15[0x3A00];
++	u8 res16[0x8000];	/* 0x108000 -  0x110000 */
++	u8 muram[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
++	u8 res17[0x24000];	/* 0x11C000 -  0x140000 */
++	u8 res18[0xC0000];	/* 0x140000 -  0x200000 */
++} __attribute__ ((packed)) qe_map_t;
++
++extern qe_map_t *qe_immr;
++
++#endif				/* __IMMAP_QE_H__ */
+diff -Naupr u-boot-1.1.6/include/asm-ppc/processor.h u-boot-1.1.6-fsl-1/include/asm-ppc/processor.h
+--- u-boot-1.1.6/include/asm-ppc/processor.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/asm-ppc/processor.h	2006-12-06 10:33:49.000000000 -0600
+@@ -749,6 +749,7 @@
+ #define PVR_405EP_RB	0x51210950
+ #define PVR_440SP_RA	0x53221850
+ #define PVR_440SP_RB	0x53221891
++#define PVR_440SP_RC	0x53221892
+ #define PVR_440SPe_RA	0x53421890
+ #define PVR_440SPe_RB	0x53421891
+ #define PVR_601		0x00010000
+diff -Naupr u-boot-1.1.6/include/common.h u-boot-1.1.6-fsl-1/include/common.h
+--- u-boot-1.1.6/include/common.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/common.h	2006-11-30 12:34:13.000000000 -0600
+@@ -270,7 +270,7 @@ int	misc_init_r   (void);
+ void	jumptable_init(void);
+ 
+ /* common/memsize.c */
+-int	get_ram_size  (volatile long *, long);
++long	get_ram_size  (volatile long *, long);
+ 
+ /* $(BOARD)/$(BOARD).c */
+ void	reset_phy     (void);
+@@ -402,6 +402,11 @@ void		ppcSync(void);
+ void		ppcDcbz(unsigned long value);
+ #endif
+ 
++#if defined (CONFIG_MPC83XX)
++void		ppcDWload(unsigned int *addr, unsigned int *ret);
++void		ppcDWstore(unsigned int *addr, unsigned int *value);
++#endif
++
+ /* $(CPU)/cpu.c */
+ int	checkcpu      (void);
+ int	checkicache   (void);
+diff -Naupr u-boot-1.1.6/include/configs/alpr.h u-boot-1.1.6-fsl-1/include/configs/alpr.h
+--- u-boot-1.1.6/include/configs/alpr.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/alpr.h	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,346 @@
++/*
++ * (C) Copyright 2006
++ * Stefan Roese, DENX Software Engineering, sr@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*-----------------------------------------------------------------------
++ * High Level Configuration Options
++ *----------------------------------------------------------------------*/
++#define CONFIG_ALPR		1	    /* Board is ebony		*/
++#define CONFIG_440GX		1	    /* Specifc GX support	*/
++#define CONFIG_4xx		1	    /* ... PPC4xx family	*/
++#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_pre_init	*/
++#define CONFIG_LAST_STAGE_INIT	1	    /* call last_stage_init()	*/
++#undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
++#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
++
++/*-----------------------------------------------------------------------
++ * Base addresses -- Note these are effective addresses where the
++ * actual resources get mapped (not physical addresses)
++ *----------------------------------------------------------------------*/
++#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0			*/
++#define CFG_FLASH_BASE		0xffe00000	/* start of FLASH		*/
++#define CFG_MONITOR_BASE	0xfffc0000	/* start of monitor		*/
++#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory		*/
++#define	CFG_PCI_MEMSIZE		0x40000000	/* size of mapped pci memory	*/
++#define CFG_PERIPHERAL_BASE	0xe0000000	/* internal peripherals		*/
++#define CFG_ISRAM_BASE		0xc0000000	/* internal SRAM		*/
++#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs		*/
++#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
++#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
++#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
++
++
++#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
++#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
++
++/*-----------------------------------------------------------------------
++ * Initial RAM & stack pointer (placed in internal SRAM)
++ *----------------------------------------------------------------------*/
++#define CFG_TEMP_STACK_OCM  1
++#define CFG_OCM_DATA_ADDR   CFG_ISRAM_BASE
++#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
++#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
++#define CFG_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
++
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
++#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
++
++#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
++#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
++
++/*-----------------------------------------------------------------------
++ * Serial Port
++ *----------------------------------------------------------------------*/
++#undef	CFG_EXT_SERIAL_CLOCK
++#define CONFIG_BAUDRATE		115200
++#define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
++
++#define CFG_BAUDRATE_TABLE  \
++    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
++
++/*-----------------------------------------------------------------------
++ * FLASH related
++ *----------------------------------------------------------------------*/
++#define CFG_FLASH_CFI		1	/* The flash is CFI compatible		*/
++#define CFG_FLASH_CFI_DRIVER	1	/* Use common CFI driver		*/
++#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
++#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
++#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
++#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
++#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
++
++#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
++
++#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
++#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
++#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
++
++/* Address and size of Redundant Environment Sector	*/
++#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
++#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
++
++/*-----------------------------------------------------------------------
++ * DDR SDRAM
++ *----------------------------------------------------------------------*/
++#undef CONFIG_SPD_EEPROM		/* Don't use SPD EEPROM for setup	*/
++#define CONFIG_SDRAM_BANK0	1	/* init onboard DDR SDRAM bank 0	*/
++#undef CONFIG_SDRAM_ECC			/* enable ECC support			*/
++#define CFG_SDRAM_TABLE	{ \
++		{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
++		{(64 << 20),  12, 0x00082001}} /* 64MB mode 2, 12x9(4)	*/
++
++/*-----------------------------------------------------------------------
++ * I2C
++ *----------------------------------------------------------------------*/
++#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
++#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
++#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
++#define CFG_I2C_SLAVE		0x7F
++#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
++
++/*-----------------------------------------------------------------------
++ * I2C EEPROM (PCF8594C)
++ *----------------------------------------------------------------------*/
++#define CFG_I2C_EEPROM_ADDR	0x54	/* EEPROM PCF8594C		*/
++#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
++/* mask of address bits that overflow into the "EEPROM chip address"	*/
++#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
++#define CFG_EEPROM_PAGE_WRITE_BITS 3	/* The Philips PCF8594C has	*/
++					/* 8 byte page write mode using */
++					/* last 3 bits of the address	*/
++#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	40   /* and takes up to 40 msec */
++#define CFG_EEPROM_PAGE_WRITE_ENABLE
++
++#define CONFIG_PREBOOT	"echo;"	\
++	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
++	"echo"
++
++#undef	CONFIG_BOOTARGS
++
++#define	CONFIG_EXTRA_ENV_SETTINGS					\
++	"netdev=eth3\0"							\
++	"hostname=alpr\0"						\
++	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
++		"nfsroot=${serverip}:${rootpath}\0"			\
++	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
++	"addip=setenv bootargs ${bootargs} "				\
++		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
++		":${hostname}:${netdev}:off panic=1\0"			\
++	"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \
++		"mem=193M\0"						\
++	"flash_nfs=run nfsargs addip addtty;"				\
++		"bootm ${kernel_addr}\0"				\
++	"flash_self=run ramargs addip addtty;"				\
++		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
++	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
++	        "bootm\0"						\
++	"rootpath=/opt/projects/alpr/nfs_root\0"			\
++	"bootfile=/alpr/uImage\0"					\
++	"kernel_addr=fff00000\0"					\
++	"ramdisk_addr=fff10000\0"					\
++	"load=tftp 100000 /alpr/u-boot/u-boot.bin\0"			\
++	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
++		"cp.b 100000 fffc0000 40000;"			        \
++		"setenv filesize;saveenv\0"				\
++	"upd=run load;run update\0"					\
++	""
++#define CONFIG_BOOTCOMMAND	"run flash_self"
++
++#define CONFIG_BOOTDELAY	2	/* autoboot after 5 seconds	*/
++
++#define CONFIG_BAUDRATE		115200
++
++#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
++#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
++
++#define CONFIG_MII		1	/* MII PHY management		*/
++#define CONFIG_NET_MULTI	1
++#define CONFIG_PHY_ADDR		0x02	/* dummy setting, no EMAC0 used	*/
++#define CONFIG_PHY1_ADDR	0x03	/* dummy setting, no EMAC1 used	*/
++#define CONFIG_PHY2_ADDR	0x01	/* PHY address for EMAC2	*/
++#define CONFIG_PHY3_ADDR	0x02	/* PHY address for EMAC3	*/
++#define CONFIG_HAS_ETH0
++#define CONFIG_HAS_ETH1
++#define CONFIG_HAS_ETH2
++#define CONFIG_HAS_ETH3
++#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
++#define CONFIG_M88E1111_PHY	1	/* needed for PHY specific setup*/
++#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
++#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
++
++#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
++
++#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
++				CFG_CMD_ASKENV	| \
++				CFG_CMD_DHCP	| \
++				CFG_CMD_DIAG	| \
++				CFG_CMD_EEPROM	| \
++				CFG_CMD_ELF	| \
++				CFG_CMD_I2C	| \
++				CFG_CMD_IRQ	| \
++				CFG_CMD_MII	| \
++				CFG_CMD_NET	| \
++				CFG_CMD_NFS	| \
++				CFG_CMD_PCI	| \
++				CFG_CMD_PING	| \
++				CFG_CMD_FPGA	| \
++				CFG_CMD_NAND	| \
++				CFG_CMD_REGINFO)
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP			/* undef to save memory		*/
++#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
++#else
++#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
++#endif
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS	16		/* max number of command args	*/
++#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
++
++#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
++#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
++
++#define CFG_LOAD_ADDR		0x100000	/* default load address */
++#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
++
++#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
++
++#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
++#define CONFIG_LOOPW            1       /* enable loopw command         */
++#define CONFIG_MX_CYCLIC     	1       /* enable mdc/mwc commands      */
++#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
++#define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
++
++#define CFG_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
++
++/*-----------------------------------------------------------------------
++ * PCI stuff
++ *-----------------------------------------------------------------------
++ */
++/* General PCI */
++#define CONFIG_PCI			/* include pci support		*/
++#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
++#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
++#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
++#define CONFIG_PCI_BOOTDELAY	1       /* enable pci bootdelay variable*/
++
++/* Board-specific PCI */
++#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
++#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
++#define CFG_PCI_MASTER_INIT
++
++#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
++#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
++
++/*-----------------------------------------------------------------------
++ * FPGA stuff
++ *-----------------------------------------------------------------------*/
++#define CONFIG_FPGA             CFG_ALTERA_CYCLON2
++#define CFG_FPGA_CHECK_CTRLC
++#define CFG_FPGA_PROG_FEEDBACK
++#define CONFIG_FPGA_COUNT       1		/* Ich habe 2 ... aber in
++					Reihe geschaltet -> sollte gehen,
++					aufpassen mit Datasize ist jetzt
++					halt doppelt so gross ... Seite 306
++					ist das mit den multiple Device in PS
++					Mode erklaert ...*/
++
++/* FPGA program pin configuration */
++#define CFG_GPIO_CLK		18	/* FPGA clk pin (cpu output)		*/
++#define CFG_GPIO_DATA		19	/* FPGA data pin (cpu output)		*/
++#define CFG_GPIO_STATUS		20	/* FPGA status pin (cpu input)		*/
++#define CFG_GPIO_CONFIG		21	/* FPGA CONFIG pin (cpu output)		*/
++#define CFG_GPIO_CON_DON	22	/* FPGA CONFIG_DONE pin (cpu input)	*/
++
++#define CFG_GPIO_SEL_DPR	14	/* cpu output */
++#define CFG_GPIO_SEL_AVR	15	/* cpu output */
++#define CFG_GPIO_PROG_EN	23	/* cpu output */
++
++/*-----------------------------------------------------------------------
++ * Definitions for GPIO setup
++ *-----------------------------------------------------------------------*/
++#define CFG_GPIO_EREADY		(0x80000000 >> 26)
++#define CFG_GPIO_REV0		(0x80000000 >> 14)
++#define CFG_GPIO_REV1		(0x80000000 >> 15)
++
++/*-----------------------------------------------------------------------
++ * NAND-FLASH stuff
++ *-----------------------------------------------------------------------*/
++#define CFG_MAX_NAND_DEVICE	4
++#define NAND_MAX_CHIPS		CFG_MAX_NAND_DEVICE
++#define CFG_NAND_BASE		0xF0000000	/* NAND FLASH Base Address	*/
++#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE + 0, CFG_NAND_BASE + 2,	\
++				  CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 }
++#define CFG_NAND_QUIET_TEST	1	/* don't warn upon unknown NAND flash	*/
++
++/*-----------------------------------------------------------------------
++ * External Bus Controller (EBC) Setup
++ *----------------------------------------------------------------------*/
++#define CFG_FLASH		CFG_FLASH_BASE
++
++/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
++#define CFG_EBC_PB0AP		0x92015480
++#define CFG_EBC_PB0CR		(CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
++
++/* Memory Bank 1 (NAND-FLASH) initialization					*/
++#define CFG_EBC_PB1AP		0x01840380	/* TWT=3			*/
++#define CFG_EBC_PB1CR		(CFG_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
++/*-----------------------------------------------------------------------
++ * Cache Configuration
++ */
++#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
++#define CFG_CACHELINE_SIZE	32	/* ...			*/
++#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
++#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
++#endif
++#endif	/* __CONFIG_H */
+diff -Naupr u-boot-1.1.6/include/configs/IceCube.h u-boot-1.1.6-fsl-1/include/configs/IceCube.h
+--- u-boot-1.1.6/include/configs/IceCube.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/IceCube.h	2006-12-06 10:33:49.000000000 -0600
+@@ -172,6 +172,19 @@
+ #undef CFG_IPBSPEED_133   	/* define for 133MHz speed */
+ #endif
+ #endif /* CONFIG_MPC5200 */
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE	1
++#define CONFIG_OF_BOARD_SETUP	1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE	8192
++
++#define OF_CPU			"PowerPC,5200@0"
++#define OF_SOC			"soc5200@f0000000"
++#define OF_TBCLK		(bd->bi_busfreq / 8)
++#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
++
+ /*
+  * I2C configuration
+  */
+diff -Naupr u-boot-1.1.6/include/configs/MPC8349EMDS.h u-boot-1.1.6-fsl-1/include/configs/MPC8349EMDS.h
+--- u-boot-1.1.6/include/configs/MPC8349EMDS.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/MPC8349EMDS.h	2006-11-10 11:24:30.000000000 -0600
+@@ -36,6 +36,7 @@
+  */
+ #define CONFIG_E300		1	/* E300 Family */
+ #define CONFIG_MPC83XX		1	/* MPC83XX family */
++#define CONFIG_MPC834X		1	/* MPC834X family */
+ #define CONFIG_MPC8349		1	/* MPC8349 specific */
+ #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
+ 
+@@ -59,9 +60,20 @@
+ #endif
+ #endif
+ 
++#define CFG_SCCR_INIT		(SCCR_DEFAULT & (~SCCR_CLK_MASK))
++#define CFG_SCCR_TSEC1CM	SCCR_TSEC1CM_1	/* TSEC1 clock setting */
++#define CFG_SCCR_TSEC2CM	SCCR_TSEC2CM_1	/* TSEC2 clock setting */
++#define CFG_SCCR_ENCCM		SCCR_ENCCM_3	/* ENC clock setting */
++#define CFG_SCCR_USBCM		SCCR_USBCM_3	/* USB clock setting */
++#define CFG_SCCR_VAL		( CFG_SCCR_INIT		\
++				| CFG_SCCR_TSEC1CM	\
++				| CFG_SCCR_TSEC2CM	\
++				| CFG_SCCR_ENCCM	\
++				| CFG_SCCR_USBCM	)
++
+ #define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
+ 
+-#define CFG_IMMRBAR		0xE0000000
++#define CFG_IMMR		0xE0000000
+ 
+ #undef CFG_DRAM_TEST				/* memory test, takes time */
+ #define CFG_MEMTEST_START	0x00000000      /* memtest region */
+@@ -299,8 +311,8 @@
+ #define CFG_BAUDRATE_TABLE  \
+ 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+ 
+-#define CFG_NS16550_COM1        (CFG_IMMRBAR+0x4500)
+-#define CFG_NS16550_COM2        (CFG_IMMRBAR+0x4600)
++#define CFG_NS16550_COM1        (CFG_IMMR+0x4500)
++#define CFG_NS16550_COM2        (CFG_IMMR+0x4600)
+ 
+ /* Use the HUSH parser */
+ #define CFG_HUSH_PARSER
+@@ -308,20 +320,35 @@
+ #define CFG_PROMPT_HUSH_PS2 "> "
+ #endif
+ 
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE	1
++#define CONFIG_OF_BOARD_SETUP	1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE	8192
++
++#define OF_CPU			"PowerPC,8349@0"
++#define OF_SOC			"soc8349@e0000000"
++#define OF_TBCLK		(bd->bi_busfreq / 4)
++#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
++
+ /* I2C */
+ #define CONFIG_HARD_I2C			/* I2C with hardware support*/
+ #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
++#define CONFIG_FSL_I2C
++#define CONFIG_I2C_MULTI_BUS
++#define CONFIG_I2C_CMD_TREE
+ #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+ #define CFG_I2C_SLAVE		0x7F
+-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
++#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
+ #define CFG_I2C_OFFSET		0x3000
+ #define CFG_I2C2_OFFSET		0x3100
+ 
+ /* TSEC */
+ #define CFG_TSEC1_OFFSET 0x24000
+-#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
++#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+ #define CFG_TSEC2_OFFSET 0x25000
+-#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
++#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+ 
+ /* USB */
+ #define CFG_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
+@@ -615,8 +642,8 @@
+ #endif
+ 
+ /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+-#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+-#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+ 
+ /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+ #define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+@@ -666,11 +693,11 @@
+ #define CONFIG_ETH1ADDR		00:E0:0C:00:7E:21
+ #endif
+ 
+-#define CONFIG_IPADDR		192.168.205.5
++#define CONFIG_IPADDR		192.168.1.253
+ 
+ #define CONFIG_HOSTNAME		mpc8349emds
+-#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
+-#define CONFIG_BOOTFILE		/tftpboot/tqm83xx/uImage
++#define CONFIG_ROOTPATH		/nfsroot/rootfs
++#define CONFIG_BOOTFILE		uImage
+ 
+ #define CONFIG_SERVERIP		192.168.1.1
+ #define CONFIG_GATEWAYIP	192.168.1.1
+@@ -703,14 +730,31 @@
+ 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+ 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
+ 		"bootm\0"						\
+-	"rootpath=/opt/eldk/ppc_6xx\0"					\
+-	"bootfile=/tftpboot/mpc8349emds/uImage\0"			\
+ 	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
+ 	"update=protect off fe000000 fe03ffff; "			\
+ 		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"	\
+ 	"upd=run load;run update\0"					\
++	"fdtaddr=400000\0"						\
++	"fdtfile=mpc8349emds.dtb\0"					\
+ 	""
+ 
++#define CONFIG_NFSBOOTCOMMAND	                                        \
++   "setenv bootargs root=/dev/nfs rw "                                  \
++      "nfsroot=$serverip:$rootpath "                                    \
++      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
++      "console=$consoledev,$baudrate $othbootargs;"                     \
++   "tftp $loadaddr $bootfile;"                                          \
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr - $fdtaddr"
++
++#define CONFIG_RAMBOOTCOMMAND						\
++   "setenv bootargs root=/dev/ram rw "                                  \
++      "console=$consoledev,$baudrate $othbootargs;"                     \
++   "tftp $ramdiskaddr $ramdiskfile;"                                    \
++   "tftp $loadaddr $bootfile;"                                          \
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr $ramdiskaddr $fdtaddr"
++
+ #define CONFIG_BOOTCOMMAND	"run flash_self"
+ 
+ #endif	/* __CONFIG_H */
+diff -Naupr u-boot-1.1.6/include/configs/MPC8349ITX.h u-boot-1.1.6-fsl-1/include/configs/MPC8349ITX.h
+--- u-boot-1.1.6/include/configs/MPC8349ITX.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/MPC8349ITX.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,804 @@
++/*
++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ MPC8349E-mITX board configuration file
++
++ Memory map:
++
++ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
++ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
++ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
++ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
++ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
++ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
++ 0xF000_0000-0xF000_FFFF Compact Flash
++ 0xF001_0000-0xF001_FFFF Local bus expansion slot
++ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
++ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
++ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
++
++ I2C address list:
++						Align.	Board
++ Bus	Addr	Part No.	Description	Length	Location
++ ----------------------------------------------------------------
++ I2C0	0x50	M24256-BWMN6P	Board EEPROM	2	U64
++
++ I2C1	0x20	PCF8574		I2C Expander	0	U8
++ I2C1	0x21	PCF8574		I2C Expander	0	U10
++ I2C1	0x38	PCF8574A	I2C Expander	0	U8
++ I2C1	0x39	PCF8574A	I2C Expander	0	U10
++ I2C1	0x51	(DDR)		DDR EEPROM	1	U1
++ I2C1	0x68	DS1339		RTC		1	U68
++
++ Note that a given board has *either* a pair of 8574s or a pair of 8574As.
++*/
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#undef DEBUG
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
++#define CONFIG_MPC8349		/* MPC8349 specific */
++
++#define CONFIG_PCI
++
++#define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
++#define CONFIG_RTC_DS1337
++
++/* I2C */
++#define CONFIG_HARD_I2C
++
++#ifdef CONFIG_HARD_I2C
++
++#define CONFIG_MISC_INIT_F
++#define CONFIG_MISC_INIT_R
++
++#define CONFIG_FSL_I2C
++#define CONFIG_I2C_MULTI_BUS
++#define CONFIG_I2C_CMD_TREE
++#define CFG_I2C_OFFSET		0x3000
++#define CFG_I2C2_OFFSET		0x3100
++#define CFG_SPD_BUS_NUM		1	/* The I2C bus for SPD */
++
++#define CFG_I2C_8574_ADDR1	0x20	/* I2C1, PCF8574 */
++#define CFG_I2C_8574_ADDR2	0x21	/* I2C1, PCF8574 */
++#define CFG_I2C_8574A_ADDR1	0x38	/* I2C1, PCF8574A */
++#define CFG_I2C_8574A_ADDR2	0x39	/* I2C1, PCF8574A */
++#define CFG_I2C_EEPROM_ADDR	0x50	/* I2C0, Board EEPROM */
++#define CFG_I2C_RTC_ADDR	0x68	/* I2C1, DS1339 RTC*/
++#define SPD_EEPROM_ADDRESS	0x51	/* I2C1, DDR */
++
++#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
++#define CFG_I2C_SLAVE		0x7F
++
++/* Don't probe these addresses: */
++#define CFG_I2C_NOPROBES	{{1, CFG_I2C_8574_ADDR1}, \
++				 {1, CFG_I2C_8574_ADDR2}, \
++				 {1, CFG_I2C_8574A_ADDR1}, \
++				 {1, CFG_I2C_8574A_ADDR2}}
++/* Bit definitions for the 8574[A] I2C expander */
++#define I2C_8574_REVISION	0x03	/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
++#define I2C_8574_CF		0x08	/* 1=Compact flash absent, 0=present */
++#define I2C_8574_MPCICLKRN	0x10	/* MiniPCI Clk Run */
++#define I2C_8574_PCI66		0x20	/* 0=33MHz PCI, 1=66MHz PCI */
++#define I2C_8574_FLASHSIDE	0x40	/* 0=Reset vector from U4, 1=from U7*/
++
++#undef CONFIG_SOFT_I2C
++
++#endif
++
++#define CONFIG_TSEC_ENET		/* tsec ethernet support */
++#define CONFIG_ENV_OVERWRITE
++
++#define PCI_66M
++#ifdef PCI_66M
++#define CONFIG_83XX_CLKIN	66666666	/* in Hz */
++#else
++#define CONFIG_83XX_CLKIN	33333333	/* in Hz */
++#endif
++
++#ifndef CONFIG_SYS_CLK_FREQ
++#ifdef PCI_66M
++#define CONFIG_SYS_CLK_FREQ	66666666
++#else
++#define CONFIG_SYS_CLK_FREQ	33333333
++#endif
++#endif
++
++#define CFG_IMMR		0xE0000000	/* The IMMR is relocated to here */
++
++#undef CFG_DRAM_TEST				/* memory test, takes time */
++#define CFG_MEMTEST_START	0x00003000	/* memtest region */
++#define CFG_MEMTEST_END		0x07100000	/* only has 128M */
++
++/*
++ * DDR Setup
++ */
++#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
++#undef CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
++#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
++
++/*
++ * 32-bit data path mode.
++ *
++ * Please note that using this mode for devices with the real density of 64-bit
++ * effectively reduces the amount of available memory due to the effect of
++ * wrapping around while translating address to row/columns, for example in the
++ * 256MB module the upper 128MB get aliased with contents of the lower
++ * 128MB); normally this define should be used for devices with real 32-bit
++ * data path.
++ */
++#undef CONFIG_DDR_32BIT
++
++#define CFG_DDR_BASE	0x00000000	/* DDR is system memory*/
++#define CFG_SDRAM_BASE CFG_DDR_BASE
++#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
++#undef	CONFIG_DDR_2T_TIMING
++#define CFG_83XX_DDR_USES_CS0
++
++#ifndef CONFIG_SPD_EEPROM
++/*
++ * Manually set up DDR parameters
++ */
++    #define CFG_DDR_SIZE	256		/* Mb */
++    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
++
++    #define CFG_DDR_TIMING_1	0x26242321
++    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
++#endif
++
++/* FLASH on the Local Bus */
++#define CFG_FLASH_CFI				/* use the Common Flash Interface */
++#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
++#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
++#define CFG_FLASH_SIZE		16		/* FLASH size in MB */
++#define CFG_FLASH_EMPTY_INFO
++
++#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
++#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
++				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
++				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
++#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
++#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16Mb window bytes */
++
++/* VSC7385 on the Local Bus */
++#define CFG_VSC7385_BASE	0xF8000000	/* start of VSC7385   */
++
++#define CFG_BR1_PRELIM		(CFG_VSC7385_BASE | BR_PS_8 | BR_V)
++#define CFG_OR1_PRELIM		(0xFFFE0000 /* 128KB */ | \
++				OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
++				OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
++
++#define CFG_LBLAWBAR1_PRELIM	CFG_VSC7385_BASE	/* Access window base at VSC7385 base */
++#define CFG_LBLAWAR1_PRELIM	0x80000010		/* Access window size 128K */
++
++#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
++#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
++
++#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
++
++#undef	CFG_FLASH_CHECKSUM
++#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
++#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
++
++#define CFG_LED_BASE		0xF9000000  /* start of LED and Board ID */
++#define CFG_BR2_PRELIM		(CFG_LED_BASE | BR_PS_8 | BR_V)
++#define CFG_OR2_PRELIM		(0xFFE00000 /* 2MB */ | \
++				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
++				OR_GPCM_SCY_9 | \
++				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
++
++#ifdef CONFIG_COMPACT_FLASH
++
++#define CFG_CF_BASE		0xF0000000
++
++#define CFG_BR3_PRELIM		(CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
++#define CFG_OR3_PRELIM		(OR_UPM_AM | OR_UPM_BI)
++
++#define CFG_LBLAWBAR2_PRELIM	CFG_CF_BASE	/* Window base at flash base + LED & Board ID */
++#define CFG_LBLAWAR2_PRELIM	0x8000000F	/* 64K bytes */
++
++#undef CONFIG_IDE_RESET
++#undef CONFIG_IDE_PREINIT
++
++#define CFG_IDE_MAXBUS		1
++#define CFG_IDE_MAXDEVICE	1
++
++#define CFG_ATA_IDE0_OFFSET	0x0000
++#define CFG_ATA_BASE_ADDR	CFG_CF_BASE
++#define CFG_ATA_DATA_OFFSET	0x0000
++#define CFG_ATA_REG_OFFSET	0
++#define CFG_ATA_ALT_OFFSET	0x0200
++#define CFG_ATA_STRIDE		2
++
++#define ATA_RESET_TIME	1	/* If a CF card is not inserted, time out quickly */
++
++#endif
++
++#define CONFIG_DOS_PARTITION
++
++#define CFG_MID_FLASH_JUMP	0x7F000000
++#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
++
++
++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
++#define CFG_RAMBOOT
++#else
++#undef	CFG_RAMBOOT
++#endif
++
++#define CONFIG_L1_INIT_RAM
++#define CFG_INIT_RAM_LOCK
++#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
++#define CFG_INIT_RAM_END	0x1000	     /* End of used area in RAM*/
++
++#define CFG_GBL_DATA_SIZE	0x100	  /* num bytes initial data */
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
++
++#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
++#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
++
++/*
++ * Local Bus LCRR and LBCR regs
++ *    LCRR:  DLL bypass, Clock divider is 4
++ * External Local Bus rate is
++ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
++ */
++#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
++#define CFG_LBC_LBCR	0x00000000
++
++#undef CFG_LB_SDRAM	/* if board has SRDAM on local bus */
++
++#ifdef CFG_LB_SDRAM
++/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
++/*
++ * Base Register 2 and Option Register 2 configure SDRAM.
++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
++ *
++ * For BR2, need:
++ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
++ *    port-size = 32-bits = BR2[19:20] = 11
++ *    no parity checking = BR2[21:22] = 00
++ *    SDRAM for MSEL = BR2[24:26] = 011
++ *    Valid = BR[31] = 1
++ *
++ * 0	4    8	  12   16   20	 24   28
++ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
++ */
++
++#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
++#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
++
++#define CFG_LBLAWBAR2_PRELIM	0xF0000000
++#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
++
++#define CFG_BR2_PRELIM		(CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
++#define CFG_OR2_PRELIM		(0xFC000000 /* 64 MB */ | \
++				 OR_SDRAM_XAM | \
++				 ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
++				 ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
++				 OR_SDRAM_EAD)
++
++#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
++#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
++
++/*
++ * LSDMR masks
++ */
++#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
++#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
++#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
++#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
++#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
++#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
++#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
++#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19))
++#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
++#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
++#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
++#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
++#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
++#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
++#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
++#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
++#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
++#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
++
++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
++
++#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFEN		\
++				| CFG_LBC_LSDMR_BSMA1516	\
++				| CFG_LBC_LSDMR_RFCR8		\
++				| CFG_LBC_LSDMR_PRETOACT6	\
++				| CFG_LBC_LSDMR_ACTTORW3	\
++				| CFG_LBC_LSDMR_BL8		\
++				| CFG_LBC_LSDMR_WRC3		\
++				| CFG_LBC_LSDMR_CL3		\
++				)
++
++/*
++ * SDRAM Controller configuration sequence.
++ */
++#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_PCHALL)
++#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_MRW)
++#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_NORMAL)
++#endif
++
++/*
++ * Serial Port
++ */
++#define CONFIG_CONS_INDEX	1
++#undef	CONFIG_SERIAL_SOFTWARE_FIFO
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE	1
++#define CFG_NS16550_CLK		get_bus_freq(0)
++
++#define CFG_BAUDRATE_TABLE  \
++	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
++
++#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
++#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
++
++/* Use the HUSH parser */
++#define CFG_HUSH_PARSER
++#ifdef	CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2 "> "
++#endif
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE	1
++#define CONFIG_OF_BOARD_SETUP	1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE	8192
++
++#define OF_CPU			"PowerPC,8349@0"
++#define OF_SOC			"soc8349@e0000000"
++#define OF_TBCLK		(bd->bi_busfreq / 4)
++#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
++
++#ifdef CONFIG_PCI
++
++#define CONFIG_MPC83XX_PCI2
++
++/*
++ * General PCI
++ * Addresses are mapped 1-1.
++ */
++#define CFG_PCI1_MEM_BASE	0x80000000
++#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
++#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
++#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
++#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
++#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
++#define CFG_PCI1_IO_BASE	0x00000000
++#define CFG_PCI1_IO_PHYS	0xE2000000
++#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
++
++#ifdef CONFIG_MPC83XX_PCI2
++#define CFG_PCI2_MEM_BASE	(CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
++#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
++#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
++#define CFG_PCI2_MMIO_BASE	(CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
++#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
++#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
++#define CFG_PCI2_IO_BASE	0x00000000
++#define CFG_PCI2_IO_PHYS	(CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
++#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
++#endif
++
++#define _IO_BASE		0x00000000	/* points to PCI I/O space */
++
++#define CONFIG_NET_MULTI
++#define CONFIG_PCI_PNP			/* do pci plug-and-play */
++
++#ifdef CONFIG_RTL8139
++/* This macro is used by RTL8139 but not defined in PPC architecture */
++#define KSEG1ADDR(x)	    (x)
++#endif
++
++#ifndef CONFIG_PCI_PNP
++    #define PCI_ENET0_IOADDR	0x00000000
++    #define PCI_ENET0_MEMADDR	CFG_PCI2_MEM_BASE
++    #define PCI_IDSEL_NUMBER	0x0f	/* IDSEL = AD15 */
++#endif
++
++#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
++
++#endif
++
++/* TSEC */
++
++#ifdef CONFIG_TSEC_ENET
++
++#ifndef CONFIG_NET_MULTI
++#define CONFIG_NET_MULTI
++#endif
++
++#define CONFIG_MII
++#define CONFIG_PHY_GIGE		/* In case CFG_CMD_MII is specified */
++
++#define CONFIG_MPC83XX_TSEC1
++
++#ifdef CONFIG_MPC83XX_TSEC1
++#define CONFIG_MPC83XX_TSEC1_NAME  "TSEC0"
++#define CFG_TSEC1_OFFSET	0x24000
++#define TSEC1_PHY_ADDR		0x1c	/* VSC8201 uses address 0x1c */
++#define TSEC1_PHYIDX		0
++#endif
++
++#ifdef CONFIG_MPC83XX_TSEC2
++#define CONFIG_MPC83XX_TSEC2_NAME  "TSEC1"
++#define CFG_TSEC2_OFFSET	0x25000
++#define CONFIG_UNKNOWN_TSEC	/* TSEC2 is proprietary */
++#define TSEC2_PHY_ADDR		4
++#define TSEC2_PHYIDX		0
++#endif
++
++#define CONFIG_ETHPRIME		"Freescale TSEC"
++
++#endif
++
++
++/*
++ * Environment
++ */
++#ifndef CFG_RAMBOOT
++  #define CFG_ENV_IS_IN_FLASH
++  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
++  #define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
++  #define CFG_ENV_SIZE		0x2000
++#else
++  #define CFG_NO_FLASH		/* Flash is not usable now */
++  #define CFG_ENV_IS_NOWHERE	/* Store ENV in memory only */
++  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
++  #define CFG_ENV_SIZE		0x2000
++#endif
++
++#define CONFIG_LOADS_ECHO	/* echo on for serial download */
++#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
++
++/* CONFIG_COMMANDS */
++
++#ifdef CONFIG_COMPACT_FLASH
++#define CONFIG_COMMANDS_CF	(CFG_CMD_IDE | CFG_CMD_FAT)
++#else
++#define CONFIG_COMMANDS_CF	0
++#endif
++
++#ifdef CONFIG_PCI
++#define CONFIG_COMMANDS_PCI	CFG_CMD_PCI
++#else
++#define CONFIG_COMMANDS_PCI	0
++#endif
++
++#ifdef CONFIG_HARD_I2C
++#define CONFIG_COMMANDS_I2C	CFG_CMD_I2C
++#else
++#define CONFIG_COMMANDS_I2C	0
++#endif
++
++#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
++				CONFIG_COMMANDS_CF	| \
++				CFG_CMD_NET	| \
++				CFG_CMD_PING	| \
++				CONFIG_COMMANDS_I2C	| \
++				CONFIG_COMMANDS_PCI	| \
++				CFG_CMD_SDRAM	| \
++				CFG_CMD_DATE	| \
++				CFG_CMD_CACHE	| \
++				CFG_CMD_IRQ)
++#include <cmd_confdefs.h>
++
++/* Watchdog */
++
++#undef CONFIG_WATCHDOG		/* watchdog disabled */
++#ifdef CONFIG_WATCHDOG
++#define CFG_WATCHDOG_VALUE	0xFFFFFFC3
++#endif
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP			/* undef to save memory */
++#define CFG_LOAD_ADDR	0x2000000	/* default load address */
++#define CFG_PROMPT	"MPC8349E-mITX> "		/* Monitor Command Prompt */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
++#else
++    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
++#endif
++
++#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
++#define CFG_MAXARGS	16		/* max number of command args */
++#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
++#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
++
++/* Cache Configuration */
++#define CFG_DCACHE_SIZE		32768
++#define CFG_CACHELINE_SIZE	32
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
++#endif
++
++#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST	*/
++
++#define CFG_HRCW_LOW (\
++	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
++	HRCWL_DDR_TO_SCB_CLK_1X1 |\
++	HRCWL_CSB_TO_CLKIN_4X1 |\
++	HRCWL_VCO_1X2 |\
++	HRCWL_CORE_TO_CSB_2X1)
++
++#ifdef PCI_64BIT
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_HOST |\
++	HRCWH_64_BIT_PCI |\
++	HRCWH_PCI1_ARBITER_ENABLE |\
++	HRCWH_PCI2_ARBITER_DISABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0X00000100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT |\
++	HRCWH_TSEC1M_IN_GMII |\
++	HRCWH_TSEC2M_IN_GMII )
++#else
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_HOST |\
++	HRCWH_32_BIT_PCI |\
++	HRCWH_PCI1_ARBITER_ENABLE |\
++	HRCWH_PCI2_ARBITER_DISABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0XFFF00100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT |\
++	HRCWH_TSEC1M_IN_GMII |\
++	HRCWH_TSEC2M_IN_GMII )
++#endif
++
++/* System performance */
++#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
++#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
++#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
++#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
++#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
++#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
++#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count */
++
++/* System IO Config */
++#define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
++#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
++
++#define CFG_HID0_INIT 0x000000000
++
++#define CFG_HID0_FINAL CFG_HID0_INIT
++
++#define CFG_HID2	HID2_HBE
++
++/* DDR @ 0x00000000 */
++#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* PCI @ 0x80000000 */
++#ifdef CONFIG_PCI
++#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#else
++#define CFG_IBAT1L	0
++#define CFG_IBAT1U	0
++#define CFG_IBAT2L	0
++#define CFG_IBAT2U	0
++#endif
++
++#ifdef CONFIG_MPC83XX_PCI2
++#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#else
++#define CFG_IBAT3L	0
++#define CFG_IBAT3U	0
++#define CFG_IBAT4L	0
++#define CFG_IBAT4U	0
++#endif
++
++/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
++#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
++#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
++
++#define CFG_IBAT7L	0
++#define CFG_IBAT7U	0
++
++#define CFG_DBAT0L	CFG_IBAT0L
++#define CFG_DBAT0U	CFG_IBAT0U
++#define CFG_DBAT1L	CFG_IBAT1L
++#define CFG_DBAT1U	CFG_IBAT1U
++#define CFG_DBAT2L	CFG_IBAT2L
++#define CFG_DBAT2U	CFG_IBAT2U
++#define CFG_DBAT3L	CFG_IBAT3L
++#define CFG_DBAT3U	CFG_IBAT3U
++#define CFG_DBAT4L	CFG_IBAT4L
++#define CFG_DBAT4U	CFG_IBAT4U
++#define CFG_DBAT5L	CFG_IBAT5L
++#define CFG_DBAT5U	CFG_IBAT5U
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++#define CFG_DBAT7L	CFG_IBAT7L
++#define CFG_DBAT7U	CFG_IBAT7U
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM	0x02	/* Software reboot */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
++#endif
++
++
++/*
++ * Environment Configuration
++ */
++#define CONFIG_ENV_OVERWRITE
++
++#ifdef CONFIG_MPC83XX_TSEC1
++#define CONFIG_ETHADDR		00:E0:0C:00:8C:01
++#endif
++
++#ifdef CONFIG_MPC83XX_TSEC2
++#define CONFIG_HAS_ETH1
++#define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
++#endif
++
++#if 1
++#define CONFIG_IPADDR		10.82.19.159
++#define CONFIG_SERVERIP		10.82.48.106
++#define CONFIG_GATEWAYIP	10.82.19.254
++#define CONFIG_NETMASK		255.255.252.0
++#define CONFIG_NETDEV		eth0
++
++#define CONFIG_HOSTNAME		mpc8349emitx
++#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
++#define CONFIG_BOOTFILE		timur/uImage
++
++#define CONFIG_UBOOTPATH	timur/u-boot.bin
++#else
++#define CONFIG_IPADDR		192.168.1.253
++#define CONFIG_SERVERIP		192.168.1.1
++#define CONFIG_GATEWAYIP	192.168.1.1
++#define CONFIG_NETMASK		255.255.252.0
++#define CONFIG_NETDEV		eth0
++
++#define CONFIG_HOSTNAME		mpc8349emitx
++#define CONFIG_ROOTPATH		/nfsroot/rootfs
++#define CONFIG_BOOTFILE		uImage
++
++#define CONFIG_UBOOTPATH	u-boot.bin
++#endif
++
++#define CONFIG_UBOOTSTART	fe700000
++#define CONFIG_UBOOTEND		fe77ffff
++
++#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
++
++#define CONFIG_BAUDRATE		115200
++
++#undef CONFIG_BOOTCOMMAND
++#ifdef CONFIG_BOOTCOMMAND
++#define CONFIG_BOOTDELAY	6
++#else
++#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
++#endif
++
++#define XMK_STR(x)	#x
++#define MK_STR(x)	XMK_STR(x)
++
++#define CONFIG_BOOTARGS \
++	"root=/dev/nfs rw" \
++	" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
++	" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
++		MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
++		MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
++	" console=ttyS0," MK_STR(CONFIG_BAUDRATE)
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++	"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
++	"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
++		"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
++		"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
++		"cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
++	"tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
++		"protect off FEF00000 FEF7FFFF; " \
++		"erase FEF00000 FEF7FFFF; " \
++		"cp.b $loadaddr FEF00000 $filesize; " \
++		"protect on FEF00000 FEF7FFFF; " \
++		"cmp.b $loadaddr FEF00000 $filesize\0" \
++	"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
++	"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
++		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"	\
++	"fdtaddr=400000\0"						\
++	"fdtfile=mpc8349emitx.dtb\0"					\
++	""
++
++#define CONFIG_NFSBOOTCOMMAND						\
++   "setenv bootargs root=/dev/nfs rw "					\
++      "nfsroot=$serverip:$rootpath "					\
++      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr - $fdtaddr"
++
++#define CONFIG_RAMBOOTCOMMAND						\
++   "setenv bootargs root=/dev/ram rw "					\
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $ramdiskaddr $ramdiskfile;"					\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr $ramdiskaddr $fdtaddr"
++
++
++#undef MK_STR
++#undef XMK_STR
++
++#endif
+diff -Naupr u-boot-1.1.6/include/configs/MPC8360EMDS.h u-boot-1.1.6-fsl-1/include/configs/MPC8360EMDS.h
+--- u-boot-1.1.6/include/configs/MPC8360EMDS.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/MPC8360EMDS.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,635 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#undef DEBUG
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_E300		1 /* E300 family */
++#define CONFIG_QE		1 /* Has QE */
++#define CONFIG_MPC83XX		1 /* MPC83XX family */
++#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
++#define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
++
++/*
++ * System Clock Setup
++ */
++#ifdef CONFIG_PCISLAVE
++#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
++#else
++#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
++#endif
++
++#ifndef CONFIG_SYS_CLK_FREQ
++#define CONFIG_SYS_CLK_FREQ	66000000
++#endif
++
++/*
++ * Hardware Reset Configuration Word
++ */
++#define CFG_HRCW_LOW (\
++	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
++	HRCWL_DDR_TO_SCB_CLK_1X1 |\
++	HRCWL_CSB_TO_CLKIN_4X1 |\
++	HRCWL_VCO_1X2 |\
++	HRCWL_CE_PLL_VCO_DIV_4 |\
++	HRCWL_CE_PLL_DIV_1X1 |\
++	HRCWL_CE_TO_PLL_1X6 |\
++	HRCWL_CORE_TO_CSB_2X1)
++
++#ifdef CONFIG_PCISLAVE
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_AGENT |\
++	HRCWH_PCI1_ARBITER_DISABLE |\
++	HRCWH_PCICKDRV_DISABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0XFFF00100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT)
++#else
++#define CFG_HRCW_HIGH (\
++	HRCWH_PCI_HOST |\
++	HRCWH_PCI1_ARBITER_ENABLE |\
++	HRCWH_PCICKDRV_ENABLE |\
++	HRCWH_CORE_ENABLE |\
++	HRCWH_FROM_0X00000100 |\
++	HRCWH_BOOTSEQ_DISABLE |\
++	HRCWH_SW_WATCHDOG_DISABLE |\
++	HRCWH_ROM_LOC_LOCAL_16BIT)
++#endif
++
++/*
++ * System IO Config
++ */
++#define CFG_SICRH		0x00000000
++#define CFG_SICRL		0x40000000
++
++#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
++
++/*
++ * IMMR new address
++ */
++#define CFG_IMMR		0xE0000000
++
++/*
++ * DDR Setup
++ */
++#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
++#define CFG_SDRAM_BASE		CFG_DDR_BASE
++#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
++
++#define CFG_83XX_DDR_USES_CS0
++
++#undef	CONFIG_DDR_ECC		/* only for ECC DDR module */
++#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
++
++#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
++#if defined(CONFIG_SPD_EEPROM)
++/*
++ * Determine DDR configuration from I2C interface.
++ */
++#define SPD_EEPROM_ADDRESS	0x52 /* DDR SODIMM */
++#else
++/*
++ * Manually set up DDR parameters
++ */
++#define CFG_DDR_SIZE		256 /* MB */
++#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
++#define CFG_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
++#define CFG_DDR_TIMING_2	0x00000800 /* may need tuning */
++#define CFG_DDR_CONTROL		0x42008000 /* Self refresh,2T timing */
++#define CFG_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
++#define CFG_DDR_INTERVAL	0x045b0100 /* page mode */
++#endif
++
++/*
++ * Memory test
++ */
++#undef CFG_DRAM_TEST		/* memory test, takes time */
++#define CFG_MEMTEST_START	0x00000000 /* memtest region */
++#define CFG_MEMTEST_END		0x00100000
++
++/*
++ * The reserved memory
++ */
++
++#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
++
++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
++#define CFG_RAMBOOT
++#else
++#undef	CFG_RAMBOOT
++#endif
++
++#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
++#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
++
++/*
++ * Initial RAM Base Address Setup
++ */
++#define CFG_INIT_RAM_LOCK	1
++#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
++#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
++#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++/*
++ * Local Bus Configuration & Clock Setup
++ */
++#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
++#define CFG_LBC_LBCR		0x00000000
++
++/*
++ * FLASH on the Local Bus
++ */
++#define CFG_FLASH_CFI		/* use the Common Flash Interface */
++#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
++#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
++#define CFG_FLASH_SIZE		16 /* FLASH size is 16M */
++
++#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
++#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
++
++#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
++			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
++			BR_V)	/* valid */
++#define CFG_OR0_PRELIM		0xfe006ff7 /* 16MB Flash size */
++
++#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
++#define CFG_MAX_FLASH_SECT	128 /* sectors per device */
++
++#undef	CFG_FLASH_CHECKSUM
++
++/*
++ * BCSR on the Local Bus
++ */
++#define CFG_BCSR		0xF8000000
++#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
++#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
++
++#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
++#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
++
++/*
++ * SDRAM on the Local Bus
++ */
++#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
++#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
++
++#define CFG_LB_SDRAM		/* if board has SRDAM on local bus */
++
++#ifdef CFG_LB_SDRAM
++#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
++#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64MB */
++
++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
++/*
++ * Base Register 2 and Option Register 2 configure SDRAM.
++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
++ *
++ * For BR2, need:
++ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
++ *    port size = 32-bits = BR2[19:20] = 11
++ *    no parity checking = BR2[21:22] = 00
++ *    SDRAM for MSEL = BR2[24:26] = 011
++ *    Valid = BR[31] = 1
++ *
++ * 0	4    8	  12   16   20	 24   28
++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
++ *
++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
++ * the top 17 bits of BR2.
++ */
++
++#define CFG_BR2_PRELIM	0xf0001861 /*Port size=32bit, MSEL=SDRAM */
++
++/*
++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
++ *
++ * For OR2, need:
++ *    64MB mask for AM, OR2[0:7] = 1111 1100
++ *		   XAM, OR2[17:18] = 11
++ *    9 columns OR2[19-21] = 010
++ *    13 rows	OR2[23-25] = 100
++ *    EAD set for extra time OR[31] = 1
++ *
++ * 0	4    8	  12   16   20	 24   28
++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
++ */
++
++#define CFG_OR2_PRELIM	0xfc006901
++
++#define CFG_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
++#define CFG_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
++
++/*
++ * LSDMR masks
++ */
++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
++
++#define CFG_LBC_LSDMR_COMMON	0x0063b723
++
++/*
++ * SDRAM Controller configuration sequence.
++ */
++#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_PCHALL)
++#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_MRW)
++#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
++				| CFG_LBC_LSDMR_OP_NORMAL)
++
++#endif
++
++/*
++ * Windows to access PIB via local bus
++ */
++#define CFG_LBLAWBAR3_PRELIM	0xf8008000 /* windows base 0xf8008000 */
++#define CFG_LBLAWAR3_PRELIM	0x8000000f /* windows size 64KB */
++
++/*
++ * CS4 on Local Bus, to PIB
++ */
++#define CFG_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
++#define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
++
++/*
++ * CS5 on Local Bus, to PIB
++ */
++#define CFG_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
++#define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
++
++/*
++ * Serial Port
++ */
++#define CONFIG_CONS_INDEX	1
++#undef	CONFIG_SERIAL_SOFTWARE_FIFO
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE	1
++#define CFG_NS16550_CLK		get_bus_freq(0)
++
++#define CFG_BAUDRATE_TABLE  \
++	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
++
++#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
++#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
++
++/* Use the HUSH parser */
++#define CFG_HUSH_PARSER
++#ifdef	CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2 "> "
++#endif
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE	1
++#define CONFIG_OF_BOARD_SETUP	1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE	8192
++
++#define OF_CPU			"PowerPC,8360@0"
++#define OF_SOC			"soc8360@e0000000"
++#define OF_TBCLK		(bd->bi_busfreq / 4)
++#define OF_STDOUT_PATH		"/soc8360@e0000000/serial@4500"
++
++/* I2C */
++#define CONFIG_HARD_I2C		/* I2C with hardware support */
++#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
++#define CONFIG_FSL_I2C
++#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
++#define CFG_I2C_SLAVE	0x7F
++#define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
++#define CFG_I2C_OFFSET	0x3000
++#define CFG_I2C2_OFFSET 0x3100
++
++/*
++ * Config on-board RTC
++ */
++#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
++#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
++
++/*
++ * General PCI
++ * Addresses are mapped 1-1.
++ */
++#define CFG_PCI_MEM_BASE	0x80000000
++#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
++#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
++#define CFG_PCI_MMIO_BASE	0x90000000
++#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
++#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
++#define CFG_PCI_IO_BASE		0xE0300000
++#define CFG_PCI_IO_PHYS		0xE0300000
++#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
++
++#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
++#define CFG_PCI_SLV_MEM_BUS	0x00000000
++#define CFG_PCI_SLV_MEM_SIZE	0x80000000
++
++
++#ifdef CONFIG_PCI
++
++#define CONFIG_NET_MULTI
++#define CONFIG_PCI_PNP		/* do pci plug-and-play */
++
++#undef CONFIG_EEPRO100
++#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
++#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
++
++#endif	/* CONFIG_PCI */
++
++
++#ifndef CONFIG_NET_MULTI
++#define CONFIG_NET_MULTI	1
++#endif
++
++/*
++ * QE UEC ethernet configuration
++ */
++#define CONFIG_UEC_ETH
++#define CONFIG_ETHPRIME		"Freescale GETH"
++#define CONFIG_PHY_MODE_NEED_CHANGE
++
++#define CONFIG_UEC_ETH1		/* GETH1 */
++
++#ifdef CONFIG_UEC_ETH1
++#define CFG_UEC1_UCC_NUM	0	/* UCC1 */
++#define CFG_UEC1_RX_CLK		QE_CLK_NONE
++#define CFG_UEC1_TX_CLK		QE_CLK9
++#define CFG_UEC1_ETH_TYPE	GIGA_ETH
++#define CFG_UEC1_PHY_ADDR	0
++#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
++#endif
++
++#define CONFIG_UEC_ETH2		/* GETH2 */
++
++#ifdef CONFIG_UEC_ETH2
++#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
++#define CFG_UEC2_RX_CLK		QE_CLK_NONE
++#define CFG_UEC2_TX_CLK		QE_CLK4
++#define CFG_UEC2_ETH_TYPE	GIGA_ETH
++#define CFG_UEC2_PHY_ADDR	1
++#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
++#endif
++
++/*
++ * Environment
++ */
++
++#ifndef CFG_RAMBOOT
++	#define CFG_ENV_IS_IN_FLASH	1
++	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
++	#define CFG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
++	#define CFG_ENV_SIZE		0x2000
++#else
++	#define CFG_NO_FLASH		1	/* Flash is not usable now */
++	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
++	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
++	#define CFG_ENV_SIZE		0x2000
++#endif
++
++#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
++#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
++
++#if defined(CFG_RAMBOOT)
++#if defined(CONFIG_PCI)
++#define	 CONFIG_COMMANDS	((CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_PCI \
++				| CFG_CMD_I2C) \
++				& \
++				~(CFG_CMD_ENV \
++				| CFG_CMD_LOADS))
++#else
++#define	 CONFIG_COMMANDS	((CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C) \
++				& \
++				~(CFG_CMD_ENV \
++				| CFG_CMD_LOADS))
++#endif
++#else
++#if defined(CONFIG_PCI)
++#define	 CONFIG_COMMANDS	(CONFIG_CMD_DFL \
++				| CFG_CMD_PCI \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C)
++#else
++#define	 CONFIG_COMMANDS	(CONFIG_CMD_DFL \
++				| CFG_CMD_PING \
++				| CFG_CMD_ASKENV \
++				| CFG_CMD_I2C  )
++#endif
++#endif
++
++#include <cmd_confdefs.h>
++
++#undef CONFIG_WATCHDOG		/* watchdog disabled */
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP		/* undef to save memory */
++#define CFG_LOAD_ADDR		0x2000000 /* default load address */
++#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
++#else
++	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
++#endif
++
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS	16		/* max number of command args */
++#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
++#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
++
++/*
++ * Core HID Setup
++ */
++#define CFG_HID0_INIT		0x000000000
++#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
++#define CFG_HID2		HID2_HBE
++
++/*
++ * Cache Config
++ */
++#define CFG_DCACHE_SIZE		32768
++#define CFG_CACHELINE_SIZE	32
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
++#endif
++
++/*
++ * MMU Setup
++ */
++
++/* DDR: cache cacheable */
++#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT0L	CFG_IBAT0L
++#define CFG_DBAT0U	CFG_IBAT0U
++
++/* IMMRBAR & PCI IO: cache-inhibit and guarded */
++#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
++#define CFG_DBAT1L	CFG_IBAT1L
++#define CFG_DBAT1U	CFG_IBAT1U
++
++/* BCSR: cache-inhibit and guarded */
++#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT2L	CFG_IBAT2L
++#define CFG_DBAT2U	CFG_IBAT2U
++
++/* FLASH: icache cacheable, but dcache-inhibit and guarded */
++#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
++#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT3U	CFG_IBAT3U
++
++/* Local bus SDRAM: cacheable */
++#define CFG_IBAT4L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT4U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
++#define CFG_DBAT4L	CFG_IBAT4L
++#define CFG_DBAT4U	CFG_IBAT4U
++
++/* Stack in dcache: cacheable, no memory coherence */
++#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
++#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT5L	CFG_IBAT5L
++#define CFG_DBAT5U	CFG_IBAT5U
++
++#ifdef CONFIG_PCI
++/* PCI MEM space: cacheable */
++#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++/* PCI MMIO space: cache-inhibit and guarded */
++#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
++			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT7L	CFG_IBAT7L
++#define CFG_DBAT7U	CFG_IBAT7U
++#else
++#define CFG_IBAT6L	(0)
++#define CFG_IBAT6U	(0)
++#define CFG_IBAT7L	(0)
++#define CFG_IBAT7U	(0)
++#define CFG_DBAT6L	CFG_IBAT6L
++#define CFG_DBAT6U	CFG_IBAT6U
++#define CFG_DBAT7L	CFG_IBAT7L
++#define CFG_DBAT7U	CFG_IBAT7U
++#endif
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM	0x02 /* Software reboot */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
++#endif
++
++/*
++ * Environment Configuration
++ */
++
++#define CONFIG_ENV_OVERWRITE
++
++#if defined(CONFIG_UEC_ETH)
++#define CONFIG_ETHADDR	00:04:9f:ef:01:01
++#define CONFIG_HAS_ETH1
++#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02
++#endif
++
++#define CONFIG_BAUDRATE 115200
++
++#define CONFIG_LOADADDR 200000	/* default location for tftp and bootm */
++
++#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
++#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
++
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++   "netdev=eth0\0"							\
++   "consoledev=ttyS0\0"							\
++   "ramdiskaddr=1000000\0"						\
++   "ramdiskfile=ramfs.83xx\0"						\
++   "fdtaddr=400000\0"							\
++   "fdtfile=mpc8349emds.dtb\0"						\
++   ""
++
++#define CONFIG_NFSBOOTCOMMAND						\
++   "setenv bootargs root=/dev/nfs rw "					\
++      "nfsroot=$serverip:$rootpath "					\
++      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr - $fdtaddr"
++
++#define CONFIG_RAMBOOTCOMMAND						\
++   "setenv bootargs root=/dev/ram rw "					\
++      "console=$consoledev,$baudrate $othbootargs;"			\
++   "tftp $ramdiskaddr $ramdiskfile;"					\
++   "tftp $loadaddr $bootfile;"						\
++   "tftp $fdtaddr $fdtfile;"						\
++   "bootm $loadaddr $ramdiskaddr $fdtaddr"
++
++
++#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
++
++#endif	/* __CONFIG_H */
+diff -Naupr u-boot-1.1.6/include/configs/p3mx.h u-boot-1.1.6-fsl-1/include/configs/p3mx.h
+--- u-boot-1.1.6/include/configs/p3mx.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/p3mx.h	2006-12-06 10:33:49.000000000 -0600
+@@ -0,0 +1,450 @@
++/*
++ * (C) Copyright 2006
++ * Stefan Roese, DENX Software Engineering, sr@denx.de.
++ *
++ * Based on original work by
++ *      Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/************************************************************************
++ * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards
++ *
++ * The defines:
++ * CONFIG_P3M750 or
++ * CONFIG_P3M7448
++ * are written into include/config.h by the "make xxx_config" command
++ ***********************************************************************/
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*-----------------------------------------------------------------------
++ * High Level Configuration Options
++ *----------------------------------------------------------------------*/
++#define CONFIG_P3Mx			/* used for both board versions	*/
++
++#if defined (CONFIG_P3M750)
++#define CONFIG_750FX			/* 750GL/GX/FX			*/
++#define CFG_BOARD_NAME		"P3M750"
++#define CFG_BUS_HZ		100000000
++#define CFG_BUS_CLK		CFG_BUS_HZ
++#define CFG_TCLK		100000000
++#elif defined (CONFIG_P3M7448)
++#define CONFIG_74xx
++#define CFG_BOARD_NAME		"P3M7448"
++#define CFG_BUS_HZ		133333333
++#define CFG_BUS_CLK		CFG_BUS_HZ
++#define CFG_TCLK		133333333
++#endif
++#define CFG_GT_DUAL_CPU			/* also for JTAG even with one cpu */
++
++/* which initialization functions to call for this board */
++#define CFG_BOARD_ASM_INIT	1
++#define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
++#define CONFIG_BOARD_EARLY_INIT_R 1     /* Call board_early_init_f	*/
++#define CONFIG_MISC_INIT_R      1	/* Call misc_init_r()		*/
++#define CONFIG_ADD_RAM_INFO	1	/* Print additional info	*/
++
++/*-----------------------------------------------------------------------
++ * Base addresses -- Note these are effective addresses where the
++ * actual resources get mapped (not physical addresses)
++ *----------------------------------------------------------------------*/
++#define CFG_SDRAM_BASE		0x00000000
++#ifdef CONFIG_P3M750
++#define CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte	*/
++#endif
++
++#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
++#if defined (CONFIG_P3M750)
++#define CFG_FLASH_BASE		0xff800000	/* start of flash banks	*/
++#define CFG_BOOT_SIZE		_8M		/* boot flash		*/
++#elif defined (CONFIG_P3M7448)
++#define CFG_FLASH_BASE		0xff000000	/* start of flash banks	*/
++#define CFG_BOOT_SIZE		_16M		/* boot flash		*/
++#endif
++#define CFG_BOOT_SPACE		CFG_FLASH_BASE	/* BOOT_CS0 flash 0    */
++#define CFG_MONITOR_BASE	0xfff00000
++#define CFG_RESET_ADDRESS	0xfff00100
++#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
++#define CFG_MISC_REGION_BASE	0xf0000000
++
++#define CFG_DFL_GT_REGS		0xf1000000	/* boot time GT_REGS */
++#define CFG_GT_REGS		0xf1000000	/* GT Registers are mapped here */
++#define CFG_INT_SRAM_BASE	0x42000000	/* GT offers 256k internal SRAM */
++
++/*-----------------------------------------------------------------------
++ * Initial RAM & stack pointer (placed in internal SRAM)
++ *----------------------------------------------------------------------*/
++ /*
++ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
++ * To an unused memory region. The stack will remain in cache until RAM
++ * is initialized
++*/
++#undef	CFG_INIT_RAM_LOCK
++#define CFG_INIT_RAM_ADDR	0x42000000
++#define CFG_INIT_RAM_END	0x1000
++#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++
++/*-----------------------------------------------------------------------
++ * Serial Port
++ *----------------------------------------------------------------------*/
++#define CONFIG_MPSC			/* MV64460 Serial		*/
++#define CONFIG_MPSC_PORT	0
++#define CONFIG_BAUDRATE		115200	/* console baudrate		*/
++#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
++#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
++#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
++
++/*-----------------------------------------------------------------------
++ * Ethernet
++ *----------------------------------------------------------------------*/
++/* Change the default ethernet port, use this define (options: 0, 1, 2) */
++#define CFG_ETH_PORT		ETH_0
++#define CONFIG_NET_MULTI
++#define MV_ETH_DEVS		2
++#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
++#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
++
++/*-----------------------------------------------------------------------
++ * FLASH related
++ *----------------------------------------------------------------------*/
++#define CFG_FLASH_CFI			/* The flash is CFI compatible		*/
++#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver		*/
++#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
++#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
++#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
++#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
++#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
++#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
++#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
++
++#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
++#if defined (CONFIG_P3M750)
++#define CFG_ENV_SECT_SIZE	0x20000 	/* one sector (1 device)*/
++#elif defined (CONFIG_P3M7448)
++#define CFG_ENV_SECT_SIZE	0x40000 	/* two sectors (2 devices parallel */
++#endif
++#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
++#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
++
++/*-----------------------------------------------------------------------
++ * DDR SDRAM
++ *----------------------------------------------------------------------*/
++#define CONFIG_MV64460_ECC
++
++/*-----------------------------------------------------------------------
++ * I2C
++ *----------------------------------------------------------------------*/
++#define CFG_I2C_SPEED		100000		/* I2C speed default	*/
++
++/* I2C RTC */
++#define CONFIG_RTC_M41T11	1
++#define CFG_I2C_RTC_ADDR	0x68
++#define CFG_M41T11_BASE_YEAR	1900	/* play along with linux	*/
++
++/*-----------------------------------------------------------------------
++ * PCI stuff
++ *----------------------------------------------------------------------*/
++#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
++#define PCI_HOST_FORCE	1		/* configure as pci host	*/
++#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
++
++#define CONFIG_PCI			/* include pci support		*/
++#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
++#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
++#define CONFIG_PCI_SCAN_SHOW		/* show devices on bus		*/
++
++/* PCI MEMORY MAP section */
++#define CFG_PCI0_MEM_BASE	0x80000000
++#define CFG_PCI0_MEM_SIZE	_128M
++#define CFG_PCI1_MEM_BASE	0x88000000
++#define CFG_PCI1_MEM_SIZE	_128M
++
++#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
++#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
++
++/* PCI I/O MAP section */
++#define CFG_PCI0_IO_BASE	0xfa000000
++#define CFG_PCI0_IO_SIZE	_16M
++#define CFG_PCI1_IO_BASE	0xfb000000
++#define CFG_PCI1_IO_SIZE	_16M
++
++#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
++#define CFG_PCI0_IO_SPACE_PCI	0x00000000
++#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
++#define CFG_PCI1_IO_SPACE_PCI	0x00000000
++
++#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
++
++#define CFG_PCI_IDSEL 0x30
++
++#undef	CONFIG_BOOTARGS
++#define	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
++	"netdev=eth0\0"							\
++	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
++		"nfsroot=${serverip}:${rootpath}\0"			\
++	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
++	"addip=setenv bootargs ${bootargs} "				\
++		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
++		":${hostname}:${netdev}:off panic=1\0"			\
++	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
++	"flash_nfs=run nfsargs addip addtty;"				\
++		"bootm ${kernel_addr}\0"				\
++	"flash_self=run ramargs addip addtty;"				\
++		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
++	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
++	        "bootm\0"						\
++	"rootpath=/opt/eldk/ppc_6xx\0"					\
++	"u-boot=p3mx/u-boot/u-boot.bin\0"				\
++	"load=tftp 100000 ${u-boot}\0"					\
++	"update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;"	\
++		"cp.b 100000 fff00000 40000;"			        \
++		"setenv filesize;saveenv\0"				\
++	"upd=run load;run update\0"					\
++	"serverip=11.0.0.152\0"
++
++#if defined (CONFIG_P3M750)
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
++	"hostname=p3m750\0"						\
++	"bootfile=/tftpboot/p3mx/vxWorks.st\0"				\
++	"kernel_addr=fc000000\0"					\
++	"ramdisk_addr=fc180000\0"					\
++	"vxfile=p3m750/vxWorks\0"					\
++	"vxuser=ddg\0"							\
++	"vxpass=ddg\0"							\
++	"vxtarget=target\0"						\
++	"vxflags=0x8\0"							\
++	"vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} "	\
++		"e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} "	\
++		"f=${vxflags}\0"
++#elif defined (CONFIG_P3M7448)
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
++	"hostname=p3m7448\0"
++#endif
++
++#if defined (CONFIG_P3M750)
++#define CONFIG_BOOTCOMMAND	"tftp;run vxargs;bootvx"
++#elif defined (CONFIG_P3M7448)
++#define CONFIG_BOOTCOMMAND	" "
++#endif
++
++#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds */
++#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
++				 CONFIG_BOOTP_BOOTFILESIZE)
++#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
++				CFG_CMD_ASKENV	| \
++				CFG_CMD_DATE	| \
++				CFG_CMD_DIAG	| \
++				CFG_CMD_ELF	| \
++				CFG_CMD_I2C	| \
++				CFG_CMD_IRQ	| \
++				CFG_CMD_MII	| \
++				CFG_CMD_NET	| \
++				CFG_CMD_NFS	| \
++				CFG_CMD_PING	| \
++				CFG_CMD_REGINFO	| \
++				CFG_CMD_PCI	| \
++				CFG_CMD_CACHE   | \
++				CFG_CMD_SDRAM)
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++/*-----------------------------------------------------------------------
++ * Miscellaneous configurable options
++ *----------------------------------------------------------------------*/
++#define CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2	"> "
++
++#define CFG_LONGHELP			/* undef to save memory		*/
++#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
++#else
++#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
++#endif
++#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS	        16	/* max number of command args	*/
++#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
++
++#define CFG_MEMTEST_START	0x0400000 /* memtest works on	        */
++#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
++
++#define CFG_LOAD_ADDR		0x08000000	/* default load address */
++
++#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
++
++#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
++#define CONFIG_LOOPW            1       /* enable loopw command         */
++#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
++#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
++#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
++
++/*-----------------------------------------------------------------------
++ * Marvell MV64460 config settings
++ *----------------------------------------------------------------------*/
++/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
++#if defined (CONFIG_P3M750)
++#define CFG_BOOT_PAR		0x8FDFF87F	/* 16 bit flash, disable burst*/
++#elif defined (CONFIG_P3M7448)
++#define CFG_BOOT_PAR		0x8FEFFFFF	/* 32 bit flash, burst enabled */
++#endif
++
++/*
++ * MPP[0]	Serial Port 0 TxD	TxD	OUT	Connected to P14 (buffered)
++ * MPP[1]	Serial Port 0 RxD	RxD	IN	Connected to P14 (buffered)
++ * MPP[2]	NC
++ * MPP[3]	Serial Port 1 TxD	TxD	OUT	Connected to P14 (buffered)
++ * MPP[4]	PCI Monarch#		GPIO	IN	Connected to P12
++ * MPP[5]	Serial Port 1 RxD	RxD	IN	Connected to P14 (buffered)
++ * MPP[6]	PMC Carrier Interrupt 0	Int	IN	Connected to P14
++ * MPP[7]	PMC Carrier Interrupt 1	Int	IN	Connected to P14
++ * MPP[8]	Reserved				Do not use
++ * MPP[9]	Reserved				Do not use
++ * MPP[10]	Reserved				Do not use
++ * MPP[11]	Reserved				Do not use
++ * MPP[12]	Phy 0 Interrupt		Int	IN
++ * MPP[13]	Phy 1 Interrupt		Int	IN
++ * MPP[14]	NC
++ * MPP[15]	NC
++ * MPP[16]	PCI Interrupt C		Int	IN	Connected to P11
++ * MPP[17]	PCI Interrupt D		Int	IN	Connected to P11
++ * MPP[18]	Watchdog NMI#		GPIO	IN	Connected to MPP[24]
++ * MPP[19]	Watchdog Expired#	WDE	OUT	Connected to rst logic
++ * MPP[20]	Watchdog Status		WD_STS	IN	Read back of rst by watchdog
++ * MPP[21]	NC
++ * MPP[22]	GP LED Green		GPIO	OUT
++ * MPP[23]	GP LED Red		GPIO	OUT
++ * MPP[24]	Watchdog NMI#		Int	OUT
++ * MPP[25]	NC
++ * MPP[26]	NC
++ * MPP[27]	PCI Interrupt A		Int	IN	Connected to P11
++ * MPP[28]	NC
++ * MPP[29]	PCI Interrupt B		Int	IN	Connected to P11
++ * MPP[30]	Module reset		GPIO	OUT	Board reset
++ * MPP[31]	PCI EReady		GPIO	IN	Connected to P12
++ */
++#define CFG_MPP_CONTROL_0	0x00303022
++#define CFG_MPP_CONTROL_1	0x00000000
++#define CFG_MPP_CONTROL_2	0x00004000
++#define CFG_MPP_CONTROL_3	0x00000004
++#define CFG_GPP_LEVEL_CONTROL	0x280730D0
++
++/*----------------------------------------------------------------------
++ * Initial BAT mappings
++ */
++
++/* NOTES:
++ * 1) GUARDED and WRITE_THRU not allowed in IBATS
++ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
++ */
++/* SDRAM */
++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
++#define CFG_DBAT0U CFG_IBAT0U
++
++/* init ram */
++#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
++#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
++#define CFG_DBAT1L  CFG_IBAT1L
++#define CFG_DBAT1U  CFG_IBAT1U
++
++/* PCI0, PCI1 in one BAT */
++#define CFG_IBAT2L BATL_NO_ACCESS
++#define CFG_IBAT2U CFG_DBAT2U
++#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* GT regs, bootrom, all the devices, PCI I/O */
++#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
++#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
++#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT3U CFG_IBAT3U
++
++#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
++#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT4U CFG_IBAT4U
++
++/* set rest out of range for Linux !!!!!!!!!!! */
++
++/* IBAT5 and DBAT5 */
++#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
++#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT5U CFG_IBAT5U
++
++/* IBAT6 and DBAT6 */
++#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
++#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT6U CFG_IBAT6U
++
++/* IBAT7 and DBAT7 */
++#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
++#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT7U CFG_IBAT7U
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
++#define CFG_VXWORKS_MAC_PTR	0x42010000 /* use some memory in SRAM that's not used!!! */
++
++/*-----------------------------------------------------------------------
++ * Cache Configuration
++ */
++#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
++#endif
++
++/*-----------------------------------------------------------------------
++ * L2CR setup -- make sure this is right for your board!
++ * look in include/mpc74xx.h for the defines used here
++ */
++#define CFG_L2
++
++#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
++#define L2_INIT 0
++#else
++#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
++			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
++#endif
++
++#define L2_ENABLE	(L2_INIT | L2CR_L2E)
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
++
++#endif	/* __CONFIG_H */
+diff -Naupr u-boot-1.1.6/include/configs/sequoia.h u-boot-1.1.6-fsl-1/include/configs/sequoia.h
+--- u-boot-1.1.6/include/configs/sequoia.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/sequoia.h	2006-11-30 12:34:13.000000000 -0600
+@@ -53,7 +53,7 @@
+ 
+ #define CFG_BOOT_BASE_ADDR	0xf0000000
+ #define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+-#define CFG_FLASH_BASE		0xfe000000	/* start of FLASH	*/
++#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
+ #define CFG_MONITOR_BASE	TEXT_BASE
+ #define CFG_NAND_ADDR		0xd0000000      /* NAND Flash		*/
+ #define CFG_OCM_BASE		0xe0010000      /* ocm			*/
+@@ -102,6 +102,7 @@
+ #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+ #else
+ #define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
++#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+ #endif
+ 
+ /*-----------------------------------------------------------------------
+@@ -234,10 +235,10 @@
+ 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+ 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+ 	        "bootm\0"						\
+-	"rootpath=/opt/eldk/ppc_4xx\0"					\
++	"rootpath=/opt/eldk/ppc_4xxFP\0"					\
+ 	"bootfile=/tftpboot/sequoia/uImage\0"				\
+-	"kernel_addr=FE000000\0"					\
+-	"ramdisk_addr=FE180000\0"					\
++	"kernel_addr=FC000000\0"					\
++	"ramdisk_addr=FC180000\0"					\
+ 	"load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0"		\
+ 	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+ 		"cp.b 100000 FFFA0000 60000\0"			        \
+@@ -378,7 +379,7 @@
+ #define CFG_NAND_CS		3		/* NAND chip connected to CSx	*/
+ /* Memory Bank 0 (NOR-FLASH) initialization					*/
+ #define CFG_EBC_PB0AP		0x03017300
+-#define CFG_EBC_PB0CR		(CFG_FLASH | 0xba000)
++#define CFG_EBC_PB0CR		(CFG_FLASH | 0xda000)
+ 
+ /* Memory Bank 3 (NAND-FLASH) initialization					*/
+ #define CFG_EBC_PB3AP		0x018003c0
+@@ -387,7 +388,7 @@
+ #define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+ /* Memory Bank 3 (NOR-FLASH) initialization					*/
+ #define CFG_EBC_PB3AP		0x03017300
+-#define CFG_EBC_PB3CR		(CFG_FLASH | 0xba000)
++#define CFG_EBC_PB3CR		(CFG_FLASH | 0xda000)
+ 
+ /* Memory Bank 0 (NAND-FLASH) initialization					*/
+ #define CFG_EBC_PB0AP		0x018003c0
+diff -Naupr u-boot-1.1.6/include/configs/TQM5200.h u-boot-1.1.6-fsl-1/include/configs/TQM5200.h
+--- u-boot-1.1.6/include/configs/TQM5200.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/TQM5200.h	2006-11-30 12:34:13.000000000 -0600
+@@ -217,43 +217,19 @@
+ 
+ #undef	CONFIG_BOOTARGS
+ 
+-#ifdef CONFIG_STK52XX
+-# if defined(CONFIG_TQM5200_B)
+-#  if defined(CFG_LOWBOOT)
+-#   define ENV_UPDT							\
+-	"update=protect off FC000000 FC07FFFF;"				\
+-		"erase FC000000 FC07FFFF;"				\
+-		"cp.b 200000 FC000000 ${filesize};"			\
+-		"protect on FC000000 FC07FFFF\0"
+-#  else	/* highboot */
+-#   define ENV_UPDT							\
+-	"update=protect off FFF00000 FFF7FFFF;"				\
+-		"erase FFF00000 FFF7FFFF;"				\
++#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT)
++# define ENV_UPDT							\
++	"update=protect off FFF00000 +${filesize};"			\
++		"erase FFF00000 +${filesize};"				\
+ 		"cp.b 200000 FFF00000 ${filesize};"			\
+-		"protect on FFF00000 FFF7FFFF\0"
+-#  endif /* CFG_LOWBOOT */
+-# else	/* !CONFIG_TQM5200_B */
+-#  define ENV_UPDT							\
+-	"update=protect off FC000000 FC05FFFF;"				\
+-		"erase FC000000 FC05FFFF;"				\
+-		"cp.b 200000 FC000000 ${filesize};"			\
+-		"protect on FC000000 FC05FFFF\0"
+-# endif /* CONFIG_TQM5200_B */
+-#elif defined (CONFIG_CAM5200)
+-#   define ENV_UPDT							\
+-	"update=protect off FC000000 FC03FFFF;"				\
+-		"erase FC000000 FC03FFFF;"				\
+-		"cp.b 200000 FC000000 ${filesize};"			\
+-		"protect on FC000000 FC03FFFF\0"
+-#elif defined (CONFIG_FO300)
++		"protect on FFF00000 +${filesize}\0"
++#else	/* default lowboot configuration */
+ #   define ENV_UPDT							\
+-	"update=protect off FC000000 FC05FFFF;"				\
+-		"erase FC000000 FC05FFFF;"				\
++	"update=protect off FC000000 +${filesize};"			\
++		"erase FC000000 +${filesize};"				\
+ 		"cp.b 200000 FC000000 ${filesize};"			\
+-		"protect on FC000000 FC05FFFF\0"
+-#else
+-# error "Unknown Carrier Board"
+-#endif	/* CONFIG_STK52XX */
++		"protect on FC000000 +${filesize}\0"
++#endif
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS					\
+ 	"netdev=eth0\0"							\
+@@ -432,7 +408,7 @@
+  */
+ #define CFG_ENV_IS_IN_FLASH	1
+ #define CFG_ENV_SIZE		0x4000	/* 16 k - keep small for fast booting */
+-#if defined(CONFIG_TQM5200_B)
++#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
+ #define CFG_ENV_SECT_SIZE	0x40000
+ #else
+ #define CFG_ENV_SECT_SIZE	0x20000
+diff -Naupr u-boot-1.1.6/include/configs/TQM834x.h u-boot-1.1.6-fsl-1/include/configs/TQM834x.h
+--- u-boot-1.1.6/include/configs/TQM834x.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/TQM834x.h	2006-11-10 11:24:30.000000000 -0600
+@@ -37,10 +37,11 @@
+ #define CONFIG_E300		1	/* E300 Family */
+ #define CONFIG_MPC83XX		1	/* MPC83XX family */
+ #define CONFIG_MPC834X		1	/* MPC834X specific */
++#define CONFIG_MPC8349		1	/* MPC8349 specific */
+ #define CONFIG_TQM834X		1	/* TQM834X board specific */
+ 
+ /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
+-#define CFG_IMMRBAR		0xff400000
++#define CFG_IMMR		0xff400000
+ 
+ /* System clock. Primary input clock when in PCI host mode */
+ #define CONFIG_83XX_CLKIN	66666000	/* 66,666 MHz */
+@@ -56,6 +57,17 @@
+  */
+ #define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+ 
++#define CFG_SCCR_INIT		(SCCR_DEFAULT & (~SCCR_CLK_MASK))
++#define CFG_SCCR_TSEC1CM	SCCR_TSEC1CM_1	/* TSEC1 clock setting */
++#define CFG_SCCR_TSEC2CM	SCCR_TSEC2CM_1	/* TSEC2 clock setting */
++#define CFG_SCCR_ENCCM		SCCR_ENCCM_3	/* ENC clock setting */
++#define CFG_SCCR_USBCM		SCCR_USBCM_3	/* USB clock setting */
++#define CFG_SCCR_VAL		( CFG_SCCR_INIT		\
++				| CFG_SCCR_TSEC1CM	\
++				| CFG_SCCR_TSEC2CM	\
++				| CFG_SCCR_ENCCM	\
++				| CFG_SCCR_USBCM	)
++
+ /* board pre init: do not call, nothing to do */
+ #undef CONFIG_BOARD_EARLY_INIT_F
+ 
+@@ -83,6 +95,7 @@
+ #define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+ #undef CFG_FLASH_CHECKSUM
+ #define CFG_FLASH_BASE		0x80000000	/* start of FLASH   */
++#define CFG_FLASH_SIZE		8		/* FLASH size in MB */
+ 
+ /* buffered writes in the AMD chip set is not supported yet */
+ #undef CFG_FLASH_USE_BUFFER_WRITE
+@@ -197,14 +210,15 @@ extern int tqm834x_num_flash_banks;
+ #define CFG_BAUDRATE_TABLE  \
+ 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+ 
+-#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
+-#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
++#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
++#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
+ 
+ /*
+  * I2C
+  */
+ #define CONFIG_HARD_I2C				/* I2C with hardware support	*/
+ #undef CONFIG_SOFT_I2C				/* I2C bit-banged		*/
++#define CONFIG_FSL_I2C
+ #define CFG_I2C_SPEED			400000	/* I2C speed: 400KHz		*/
+ #define CFG_I2C_SLAVE			0x7F	/* slave address		*/
+ #define CFG_I2C_OFFSET			0x3000
+@@ -235,9 +249,9 @@ extern int tqm834x_num_flash_banks;
+ #define CONFIG_MII
+ 
+ #define CFG_TSEC1_OFFSET	0x24000
+-#define CFG_TSEC1		(CFG_IMMRBAR + CFG_TSEC1_OFFSET)
++#define CFG_TSEC1		(CFG_IMMR + CFG_TSEC1_OFFSET)
+ #define CFG_TSEC2_OFFSET	0x25000
+-#define CFG_TSEC2		(CFG_IMMRBAR + CFG_TSEC2_OFFSET)
++#define CFG_TSEC2		(CFG_IMMR + CFG_TSEC2_OFFSET)
+ 
+ #if defined(CONFIG_TSEC_ENET)
+ 
+@@ -460,8 +474,8 @@ extern int tqm834x_num_flash_banks;
+ #endif
+ 
+ /* IMMRBAR */
+-#define CFG_IBAT6L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+-#define CFG_IBAT6U	(CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
++#define CFG_IBAT6L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT6U	(CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
+ 
+ /* FLASH */
+ #define CFG_IBAT7L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+diff -Naupr u-boot-1.1.6/include/configs/v38b.h u-boot-1.1.6-fsl-1/include/configs/v38b.h
+--- u-boot-1.1.6/include/configs/v38b.h	1969-12-31 18:00:00.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/v38b.h	2006-11-30 12:34:13.000000000 -0600
+@@ -0,0 +1,343 @@
++/*
++ * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
++ * wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this project.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the Free
++ * Software Foundation; either version 2 of the License, or (at your option)
++ * any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc., 59
++ * Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * High Level Configuration Options
++ * (easy to change)
++ */
++#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU */
++#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
++#define CONFIG_V38B			1	/* ...on V38B board */
++#define CFG_MPC5XXX_CLKIN	33000000	/* ...running at 33.000000MHz */
++
++#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC */
++#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM */
++
++#undef CONFIG_HW_WATCHDOG			/* don't use watchdog */
++
++#define CONFIG_NETCONSOLE		1
++
++#define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
++
++#define CFG_XLB_PIPELINING		1	/* gives better performance */
++
++#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
++#define BOOTFLAG_WARM		0x02	/* Software reboot */
++
++#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
++#endif
++
++/*
++ * Serial console configuration
++ */
++#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
++#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
++#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
++
++/*
++ * DDR
++ */
++#define SDRAM_DDR		1	/* is DDR */
++/* Settings for XLB = 132 MHz */
++#define SDRAM_MODE		0x018D0000
++#define SDRAM_EMODE		0x40090000
++#define SDRAM_CONTROL		0x704f0f00
++#define SDRAM_CONFIG1		0x73722930
++#define SDRAM_CONFIG2		0x47770000
++#define SDRAM_TAPDELAY		0x10000000
++
++/*
++ * PCI - no suport
++ */
++#undef CONFIG_PCI
++
++/*
++ * Partitions
++ */
++#define CONFIG_MAC_PARTITION	1
++#define CONFIG_DOS_PARTITION	1
++
++/*
++ * USB
++ */
++#define CONFIG_USB_OHCI
++#define CONFIG_USB_STORAGE
++#define CONFIG_USB_CLOCK	0x0001BBBB
++#define CONFIG_USB_CONFIG	0x00001000
++
++/*
++ * Supported commands
++ */
++#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
++				 CFG_CMD_FAT	| \
++				 CFG_CMD_I2C	| \
++				 CFG_CMD_IDE	| \
++				 CFG_CMD_PING	| \
++				 CFG_CMD_DHCP	| \
++				 CFG_CMD_DIAG	| \
++				 CFG_CMD_IRQ	| \
++				 CFG_CMD_JFFS2	| \
++				 CFG_CMD_MII	| \
++				 CFG_CMD_SDRAMi	| \
++				 CFG_CMD_DATE	| \
++				 CFG_CMD_USB	| \
++				 CFG_CMD_FAT)
++
++#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++/*
++ * Boot low with 16 MB Flash
++ */
++#define CFG_LOWBOOT		1
++#define CFG_LOWBOOT16		1
++
++/*
++ * Autobooting
++ */
++#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
++
++#define CONFIG_PREBOOT	"echo;"	\
++	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
++	"echo"
++
++#undef CONFIG_BOOTARGS
++
++#define CONFIG_EXTRA_ENV_SETTINGS					\
++	"bootcmd=run net_nfs\0"						\
++	"bootdelay=3\0"							\
++	"baudrate=115200\0"						\
++	"preboot=echo;echo Type \"run flash_nfs\" to mount root "	\
++		"filesystem over NFS; echo\0"				\
++	"netdev=eth0\0"							\
++	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
++	"addip=setenv bootargs $(bootargs) "				\
++		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
++		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
++	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
++	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
++		"$(ramdisk_addr)\0"					\
++	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
++	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
++		"nfsroot=$(serverip):$(rootpath)\0"			\
++	"hostname=v38b\0"						\
++	"ethact=FEC ETHERNET\0"						\
++	"rootpath=/opt/eldk-3.1.1/ppc_6xx\0"				\
++	"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; "	\
++		"cp.b 200000 ff000000 $(filesize);"			\
++		"prot on ff000000 ff03ffff\0"				\
++	"load=tftp 200000 $(u-boot)\0"					\
++	"netmask=255.255.0.0\0"						\
++	"ipaddr=192.168.160.18\0"					\
++	"serverip=192.168.1.1\0"					\
++	"ethaddr=00:e0:ee:00:05:2e\0"					\
++	"bootfile=/tftpboot/v38b/uImage\0"				\
++	"u-boot=/tftpboot/v38b/u-boot.bin\0"				\
++	""
++
++#define CONFIG_BOOTCOMMAND	"run net_nfs"
++
++#if defined(CONFIG_MPC5200)
++/*
++ * IPB Bus clocking configuration.
++ */
++#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
++#endif
++
++/*
++ * I2C configuration
++ */
++#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
++#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
++#define CFG_I2C_SPEED		100000	/* 100 kHz */
++#define CFG_I2C_SLAVE		0x7F
++
++/*
++ * EEPROM configuration
++ */
++#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
++#define CFG_I2C_EEPROM_ADDR_LEN		1
++#define CFG_EEPROM_PAGE_WRITE_BITS	3
++#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
++
++/*
++ * RTC configuration
++ */
++#define CFG_I2C_RTC_ADDR		0x51
++
++/*
++ * Flash configuration - use CFI driver
++ */
++#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
++#define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
++#define CFG_FLASH_CFI_AMD_RESET	1
++#define CFG_FLASH_BASE		0xFF000000
++#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
++#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
++#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
++#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
++#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
++
++/*
++ * Environment settings
++ */
++#define CFG_ENV_IS_IN_FLASH	1
++#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
++#define CFG_ENV_SIZE		0x10000
++#define CFG_ENV_SECT_SIZE	0x10000
++#define CONFIG_ENV_OVERWRITE	1
++
++/*
++ * Memory map
++ */
++#define CFG_MBAR		0xF0000000
++#define CFG_SDRAM_BASE		0x00000000
++#define CFG_DEFAULT_MBAR	0x80000000
++
++/* Use SRAM until RAM will be available */
++#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
++#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
++
++#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
++#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
++
++#define CFG_MONITOR_BASE	TEXT_BASE
++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
++#   define CFG_RAMBOOT		1
++#endif
++
++#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256kB for Monitor */
++#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128kB for malloc() */
++#define CFG_BOOTMAPSZ		(8 << 20)	/* Linux initial memory map */
++
++/*
++ * Ethernet configuration
++ */
++#define CONFIG_MPC5xxx_FEC	1
++#define CONFIG_PHY_ADDR		0x00
++#define CONFIG_MII		1
++
++/*
++ * GPIO configuration
++ */
++#define CFG_GPS_PORT_CONFIG	0x90001404
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP			/* undef to save memory */
++#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
++#else
++#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
++#endif
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
++#define CFG_MAXARGS		16		/* max number of command args */
++#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
++
++#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
++#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM */
++
++#define CFG_LOAD_ADDR		0x100000	/* default load address */
++
++#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
++
++/*
++ * Various low-level settings
++ */
++#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
++#define CFG_HID0_FINAL		HID0_ICE
++
++#define CFG_BOOTCS_START	CFG_FLASH_BASE
++#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
++#define CFG_BOOTCS_CFG		0x00047801
++#define CFG_CS0_START		CFG_FLASH_BASE
++#define CFG_CS0_SIZE		CFG_FLASH_SIZE
++
++#define CFG_CS_BURST		0x00000000
++#define CFG_CS_DEADCYCLE	0x33333333
++
++#define CFG_RESET_ADDRESS	0xff000000
++
++/*
++ * IDE/ATA (supports IDE harddisk)
++ */
++#undef CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card Adapter */
++#undef CONFIG_IDE_8xx_DIRECT		/* Direct IDE not supported */
++#undef CONFIG_IDE_LED			/* LED for ide not supported */
++
++#define CONFIG_IDE_RESET		/* reset for ide supported */
++#define CONFIG_IDE_PREINIT
++
++#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus */
++#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus */
++
++#define CFG_ATA_IDE0_OFFSET	0x0000
++
++#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
++
++#define CFG_ATA_DATA_OFFSET	(0x0060)	/* data I/O offset */
++
++#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)	/* normal register accesses offset */
++
++#define CFG_ATA_ALT_OFFSET	(0x005C)	/* alternate registers offset */
++
++#define CFG_ATA_STRIDE		4		/* Interval between registers */
++
++/*
++ * Status LED
++ */
++#define  CONFIG_STATUS_LED		/* Status LED enabled */
++#define  CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
++
++#define CFG_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
++#ifndef __ASSEMBLY__
++typedef unsigned int led_id_t;
++
++#define __led_toggle(_msk) \
++	do { \
++		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
++	} while(0)
++
++#define __led_set(_msk, _st) \
++	do { \
++		if ((_st)) \
++			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
++		else \
++			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
++	} while(0)
++
++#define __led_init(_msk, st) \
++	do { \
++		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
++	} while(0)
++#endif /* __ASSEMBLY__ */
++
++#endif /* __CONFIG_H */
+diff -Naupr u-boot-1.1.6/include/configs/V38B.h u-boot-1.1.6-fsl-1/include/configs/V38B.h
+--- u-boot-1.1.6/include/configs/V38B.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/V38B.h	1969-12-31 18:00:00.000000000 -0600
+@@ -1,368 +0,0 @@
+-/*
+- * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+- * wd@denx.de.
+- *
+- * See file CREDITS for list of people who contributed to this project.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the Free
+- * Software Foundation; either version 2 of the License, or (at your option)
+- * any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but WITHOUT
+- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+- * for more details.
+- *
+- * You should have received a copy of the GNU General Public License along
+- * with this program; if not, write to the Free Software Foundation, Inc., 59
+- * Temple Place, Suite 330, Boston, MA 02111-1307 USA
+- */
+-
+-#ifndef __CONFIG_H
+-#define __CONFIG_H
+-
+-#if 0
+-#define DEBUG 0xFFF
+-#endif
+-
+-#if 0
+-#define DEBUG 0x01
+-#endif
+-
+-/*
+- * High Level Configuration Options
+- * (easy to change)
+-*/
+-
+-#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU	*/
+-#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU	*/
+-#define CONFIG_V38B			1	/* ... on V38B board		*/
+-#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz	*/
+-
+-#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC		*/
+-#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM		*/
+-#define CONFIG_HW_WATCHDOG		1	/* has watchdog			*/
+-
+-#define CONFIG_NETCONSOLE		1
+-
+-#define CONFIG_BOARD_EARLY_INIT_R	1	/* make flash read/write	*/
+-
+-#define CFG_XLB_PIPELINING		1	/* gives better performance	*/
+-
+-
+-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+-
+-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+-#endif
+-
+-/*
+- * Serial console configuration
+- */
+-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
+-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+-
+-
+-/*
+- * DDR
+- */
+-#define SDRAM_DDR		1	/* is DDR */
+-/* Settings for XLB = 132 MHz */
+-#define SDRAM_MODE		0x018D0000
+-#define SDRAM_EMODE		0x40090000
+-#define SDRAM_CONTROL		0x704f0f00
+-#define SDRAM_CONFIG1		0x73722930
+-#define SDRAM_CONFIG2		0x47770000
+-#define SDRAM_TAPDELAY		0x10000000
+-
+-
+-/*
+- * PCI - no suport
+- */
+-#undef CONFIG_PCI
+-
+-/*
+- * Partitions
+- */
+-#define CONFIG_MAC_PARTITION	1
+-#define CONFIG_DOS_PARTITION	1
+-
+-/*
+- * USB
+- */
+-#define CONFIG_USB_OHCI
+-#define CONFIG_USB_STORAGE
+-
+-#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+-
+-/*
+- * Supported commands
+- */
+-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+-				 CFG_CMD_FAT	| \
+-				 CFG_CMD_I2C	| \
+-				 CFG_CMD_IDE	| \
+-				 CFG_CMD_PING	| \
+-				 CFG_CMD_DHCP	| \
+-				 CFG_CMD_DIAG	| \
+-				 CFG_CMD_IRQ	| \
+-				 CFG_CMD_JFFS2	| \
+-				 CFG_CMD_MII	| \
+-				 CFG_CMD_SDRAMi | \
+-				 CFG_CMD_DATE	| \
+-				 CFG_CMD_USB	| \
+-				 CFG_CMD_FAT)
+-
+-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+-#include <cmd_confdefs.h>
+-
+-/*
+- * Boot low with 16 MB Flash
+- */
+-#   define CFG_LOWBOOT		1
+-#   define CFG_LOWBOOT16	1
+-
+-/*
+- * Autobooting
+- */
+-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+-
+-#define CONFIG_PREBOOT	"echo;" \
+-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+-	"echo"
+-
+-#undef	CONFIG_BOOTARGS
+-
+-#define CONFIG_EXTRA_ENV_SETTINGS					\
+-	"netdev=eth0\0"							\
+-	"devno=5\0"							\
+-	"hostname=V38B_$(devno)\0"					\
+-	"ipaddr=10.100.99.$(devno)\0"					\
+-	"netmask=255.255.0.0\0"						\
+-	"serverip=10.100.10.90\0"					\
+-	"gatewayip=10.100.254.254\0"					\
+-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+-	"rootpath=/opt/eldk/ppc_6xx\0"					\
+-	"bootfile=mpc5200/uImage\0"					\
+-	"bootcmd=run net_nfs\0"						\
+-	"addip=setenv bootargs $(bootargs) "				\
+-		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
+-		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
+-	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
+-	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
+-		"$(ramdisk_addr)\0"					\
+-	"net_nfs=tftp 200000 $(bootfile);run nfsargs "			\
+-		"addip;bootm\0"						\
+-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+-		"nfsroot=$(serverip):$(rootpath)\0"			\
+-	""
+-
+-#define CONFIG_BOOTCOMMAND	"run net_nfs"
+-
+-#if defined(CONFIG_MPC5200)
+-/*
+- * IPB Bus clocking configuration.
+- */
+-#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+-#endif
+-/*
+- * I2C configuration
+- */
+-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+-
+-#define CFG_I2C_SPEED		100000 /* 100 kHz */
+-#define CFG_I2C_SLAVE		0x7F
+-
+-/*
+- * EEPROM configuration
+- */
+-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+-#define CFG_I2C_EEPROM_ADDR_LEN		1
+-#define CFG_EEPROM_PAGE_WRITE_BITS	3
+-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+-
+-/*
+- * RTC configuration
+- */
+-#define CFG_I2C_RTC_ADDR		0x51
+-
+-/*
+- * Flash configuration - use CFI driver
+- */
+-#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
+-#define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
+-#define CFG_FLASH_CFI_AMD_RESET 1
+-#define CFG_FLASH_BASE		0xFF000000
+-#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
+-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+-#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
+-#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
+-#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
+-
+-/*
+- * Environment settings
+- */
+-#define CFG_ENV_IS_IN_FLASH	1
+-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+-#define CFG_ENV_SIZE		0x10000
+-#define CFG_ENV_SECT_SIZE	0x10000
+-#define CONFIG_ENV_OVERWRITE	1
+-
+-/*
+- * Memory map
+- */
+-#define CFG_MBAR		0xF0000000
+-#define CFG_SDRAM_BASE		0x00000000
+-#define CFG_DEFAULT_MBAR	0x80000000
+-
+-/* Use SRAM until RAM will be available */
+-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+-
+-
+-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+-
+-#define CFG_MONITOR_BASE    TEXT_BASE
+-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+-#   define CFG_RAMBOOT		1
+-#endif
+-
+-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+-
+-/*
+- * Ethernet configuration
+- */
+-#define CONFIG_MPC5xxx_FEC	1
+-#define CONFIG_PHY_ADDR		0x00
+-#define CONFIG_MII		1
+-
+-/*
+- * GPIO configuration
+- */
+-#define CFG_GPS_PORT_CONFIG	0x90000404
+-
+-/*
+- * Miscellaneous configurable options
+- */
+-#define CFG_LONGHELP			/* undef to save memory	    */
+-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+-#else
+-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+-#endif
+-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+-#define CFG_MAXARGS		16		/* max number of command args	*/
+-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+-
+-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+-
+-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+-
+-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+-
+-/*
+- * Various low-level settings
+- */
+-#if defined(CONFIG_MPC5200)
+-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+-#define CFG_HID0_FINAL		HID0_ICE
+-#else
+-#define CFG_HID0_INIT		0
+-#define CFG_HID0_FINAL		0
+-#endif
+-
+-
+-#define CFG_BOOTCS_START	CFG_FLASH_BASE
+-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+-#define CFG_BOOTCS_CFG		0x00047801
+-#define CFG_CS0_START		CFG_FLASH_BASE
+-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+-
+-#define CFG_CS_BURST		0x00000000
+-#define CFG_CS_DEADCYCLE	0x33333333
+-
+-#define CFG_RESET_ADDRESS	0xff000000
+-
+-/*-----------------------------------------------------------------------
+- * USB stuff
+- *-----------------------------------------------------------------------
+- */
+-#define CONFIG_USB_CLOCK	0x0001BBBB
+-#define CONFIG_USB_CONFIG	0x00001000
+-
+-
+-/*-----------------------------------------------------------------------
+- * IDE/ATA stuff Supports IDE harddisk
+- *-----------------------------------------------------------------------
+- */
+-
+-#undef	CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card	Adapter */
+-
+-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+-
+-#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+-#define CONFIG_IDE_PREINIT
+-
+-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+-
+-#define CFG_ATA_IDE0_OFFSET	0x0000
+-
+-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+-
+-/* Offset for data I/O			*/
+-#define CFG_ATA_DATA_OFFSET	(0x0060)
+-
+-/* Offset for normal register accesses	*/
+-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+-
+-/* Offset for alternate registers	*/
+-#define CFG_ATA_ALT_OFFSET	(0x005C)
+-
+-/* Interval between registers						     */
+-#define CFG_ATA_STRIDE		4
+-
+-/* Status LED						     */
+-
+-#define	 CONFIG_STATUS_LED		 /* Status LED enabled		 */
+-#define	 CONFIG_BOARD_SPECIFIC_LED	 /* version has board specific leds */
+-
+-#define CFG_LED_BASE	(0xf0000600 + 0x70)	/* Timer 7 GPIO */
+-
+-#ifndef __ASSEMBLY__
+-/* LEDs */
+-typedef unsigned int led_id_t;
+-
+-#define __led_toggle(_msk) \
+-	do { \
+-		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
+-	} while(0)
+-
+-#define __led_set(_msk, _st) \
+-	do { \
+-		if ((_st)) \
+-			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
+-		else \
+-			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
+-	} while(0)
+-
+-#define __led_init(_msk, st) \
+-	{ \
+-		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
+-	}
+-
+-#endif
+-
+-#endif /* __CONFIG_H */
+diff -Naupr u-boot-1.1.6/include/configs/yellowstone.h u-boot-1.1.6-fsl-1/include/configs/yellowstone.h
+--- u-boot-1.1.6/include/configs/yellowstone.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/yellowstone.h	2006-11-30 12:34:13.000000000 -0600
+@@ -37,6 +37,7 @@
+ 
+ #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
+ #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
++#define CONFIG_BOARD_RESET	1	/* call board_reset()		*/
+ 
+ /*-----------------------------------------------------------------------
+  * Base addresses -- Note these are effective addresses where the
+diff -Naupr u-boot-1.1.6/include/configs/yosemite.h u-boot-1.1.6-fsl-1/include/configs/yosemite.h
+--- u-boot-1.1.6/include/configs/yosemite.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/configs/yosemite.h	2006-11-30 12:34:13.000000000 -0600
+@@ -37,6 +37,7 @@
+ 
+ #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
+ #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
++#define CONFIG_BOARD_RESET	1	/* call board_reset()		*/
+ 
+ /*-----------------------------------------------------------------------
+  * Base addresses -- Note these are effective addresses where the
+diff -Naupr u-boot-1.1.6/include/environment.h u-boot-1.1.6-fsl-1/include/environment.h
+--- u-boot-1.1.6/include/environment.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/environment.h	2006-11-30 12:34:13.000000000 -0600
+@@ -79,8 +79,7 @@
+ # ifdef CFG_ENV_OFFSET_REDUND
+ #  define CFG_REDUNDAND_ENVIRONMENT
+ # endif
+-# if defined(CONFIG_NAND_U_BOOT)
+-/* Use embedded environment in NAND boot versions */
++# ifdef CFG_ENV_IS_EMBEDDED
+ #  define ENV_IS_EMBEDDED	1
+ # endif
+ #endif /* CFG_ENV_IS_IN_NAND */
+diff -Naupr u-boot-1.1.6/include/flash.h u-boot-1.1.6-fsl-1/include/flash.h
+--- u-boot-1.1.6/include/flash.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/flash.h	2006-11-30 12:34:13.000000000 -0600
+@@ -43,9 +43,14 @@ typedef struct {
+ 	ulong	write_tout;		/* maximum write timeout		*/
+ 	ulong	buffer_write_tout;	/* maximum buffer write timeout		*/
+ 	ushort	vendor;			/* the primary vendor id		*/
+-	ushort	cmd_reset;		/* Vendor specific reset command	*/
++	ushort	cmd_reset;		/* vendor specific reset command	*/
+ 	ushort	interface;		/* used for x8/x16 adjustments		*/
+ 	ushort	legacy_unlock;		/* support Intel legacy (un)locking	*/
++	uchar	manufacturer_id;	/* manufacturer id			*/
++	ushort	device_id;		/* device id				*/
++	ushort	device_id2;		/* extended device id			*/
++	ushort	ext_addr;		/* extended query table address		*/
++	ushort	cfi_version;		/* cfi version				*/
+ #endif
+ } flash_info_t;
+ 
+@@ -439,6 +444,7 @@ extern void flash_read_factory_serial(fl
+ #define FLASH_MAN_MT	0x00400000
+ #define FLASH_MAN_SHARP 0x00500000
+ #define FLASH_MAN_ATM	0x00600000
++#define FLASH_MAN_CFI	0x01000000
+ 
+ 
+ #define FLASH_TYPEMASK	0x0000FFFF	/* extract FLASH type	information	*/
+diff -Naupr u-boot-1.1.6/include/i2c.h u-boot-1.1.6-fsl-1/include/i2c.h
+--- u-boot-1.1.6/include/i2c.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/i2c.h	2006-11-10 11:24:30.000000000 -0600
+@@ -82,4 +82,49 @@ int i2c_write(uchar chip, uint addr, int
+ uchar i2c_reg_read (uchar chip, uchar reg);
+ void  i2c_reg_write(uchar chip, uchar reg, uchar val);
+ 
++/*
++ * Functions for setting the current I2C bus and its speed
++ */
++
++/*
++ * i2c_set_bus_num:
++ *
++ *  Change the active I2C bus.  Subsequent read/write calls will
++ *  go to this one.
++ *
++ * 	bus - bus index, zero based
++ *
++ * 	Returns: 0 on success, not 0 on failure
++ *
++ */
++int i2c_set_bus_num(unsigned int bus);
++
++/*
++ * i2c_get_bus_num:
++ *
++ *  Returns index of currently active I2C bus.  Zero-based.
++ */
++
++unsigned int i2c_get_bus_num(void);
++
++/*
++ * i2c_set_bus_speed:
++ *
++ *  Change the speed of the active I2C bus
++ *
++ * 	speed - bus speed in Hz
++ *
++ * 	Returns: 0 on success, not 0 on failure
++ *
++ */
++int i2c_set_bus_speed(unsigned int);
++
++/*
++ * i2c_get_bus_speed:
++ *
++ *  Returns speed of currently active I2C bus in Hz
++ */
++
++unsigned int i2c_get_bus_speed(void);
++
+ #endif	/* _I2C_H_ */
+diff -Naupr u-boot-1.1.6/include/ioports.h u-boot-1.1.6-fsl-1/include/ioports.h
+--- u-boot-1.1.6/include/ioports.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/ioports.h	2006-12-06 10:33:49.000000000 -0600
+@@ -53,3 +53,13 @@ typedef struct {
+  * like the table in the 8260UM (and in the hymod manuals).
+  */
+ extern const iop_conf_t iop_conf_tab[4][32];
++
++typedef struct {
++	unsigned char	port;
++	unsigned char	pin;
++	int		dir;
++	int		open_drain;
++	int		assign;
++} qe_iop_conf_t;
++
++#define QE_IOP_TAB_END	(-1)
+diff -Naupr u-boot-1.1.6/include/mpc5xxx.h u-boot-1.1.6-fsl-1/include/mpc5xxx.h
+--- u-boot-1.1.6/include/mpc5xxx.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/mpc5xxx.h	2006-11-10 11:24:30.000000000 -0600
+@@ -188,7 +188,14 @@
+ #define MPC5XXX_WU_GPIO_ENABLE  (MPC5XXX_WU_GPIO + 0x0000)
+ #define MPC5XXX_WU_GPIO_ODE     (MPC5XXX_WU_GPIO + 0x0004)
+ #define MPC5XXX_WU_GPIO_DIR     (MPC5XXX_WU_GPIO + 0x0008)
+-#define MPC5XXX_WU_GPIO_DATA    (MPC5XXX_WU_GPIO + 0x000c)
++#define MPC5XXX_WU_GPIO_DATA_O  (MPC5XXX_WU_GPIO + 0x000c)
++#define MPC5XXX_WU_GPIO_DATA_I  (MPC5XXX_WU_GPIO + 0x0020)
++
++/* GPIO pins */
++#define GPIO_WKUP_7		0x80000000UL
++#define GPIO_PSC6_0		0x10000000UL
++#define GPIO_PSC3_9		0x04000000UL
++#define GPIO_PSC1_4		0x01000000UL
+ 
+ /* PCI registers */
+ #define MPC5XXX_PCI_CMD		(MPC5XXX_PCI + 0x04)
+diff -Naupr u-boot-1.1.6/include/mpc83xx.h u-boot-1.1.6-fsl-1/include/mpc83xx.h
+--- u-boot-1.1.6/include/mpc83xx.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/mpc83xx.h	2006-11-10 11:24:30.000000000 -0600
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright 2004 Freescale Semiconductor, Inc.
++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+  *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+@@ -8,16 +8,6 @@
+  * modify it under the terms of the GNU General Public License as
+  * published by the Free Software Foundation; either version 2 of
+  * the License, or (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+- * MA 02111-1307 USA
+  */
+ 
+ /*
+@@ -29,6 +19,7 @@
+ #ifndef __MPC83XX_H__
+ #define __MPC83XX_H__
+ 
++#include <config.h>
+ #if defined(CONFIG_E300)
+ #include <asm/e300.h>
+ #endif
+@@ -85,6 +76,33 @@
+ #define LBLAWBAR3 0x0038
+ #define LBLAWAR3  0x003C
+ 
++/*
++ * The device ID and revision numbers
++ */
++#define SPR_8349E_REV10		0x80300100
++#define SPR_8349_REV10		0x80310100
++#define SPR_8347E_REV10_TBGA	0x80320100
++#define SPR_8347_REV10_TBGA	0x80330100
++#define SPR_8347E_REV10_PBGA	0x80340100
++#define SPR_8347_REV10_PBGA	0x80350100
++#define SPR_8343E_REV10		0x80360100
++#define SPR_8343_REV10		0x80370100
++
++#define SPR_8349E_REV11		0x80300101
++#define SPR_8349_REV11		0x80310101
++#define SPR_8347E_REV11_TBGA	0x80320101
++#define SPR_8347_REV11_TBGA	0x80330101
++#define SPR_8347E_REV11_PBGA	0x80340101
++#define SPR_8347_REV11_PBGA	0x80350101
++#define SPR_8343E_REV11		0x80360101
++#define SPR_8343_REV11		0x80370101
++
++#define SPR_8360E_REV10		0x80480010
++#define SPR_8360_REV10		0x80490010
++#define SPR_8360E_REV11		0x80480011
++#define SPR_8360_REV11		0x80490011
++#define SPR_8360E_REV12		0x80480012
++#define SPR_8360_REV12		0x80490012
+ 
+ /*
+  * Base Registers & Option Registers
+@@ -116,9 +134,17 @@
+ #define BR_MS_UPMA	0x00000080  /* UPMA */
+ #define BR_MS_UPMB	0x000000A0  /* UPMB */
+ #define BR_MS_UPMC	0x000000C0  /* UPMC */
++#if defined (CONFIG_MPC8360)
++#define BR_ATOM		0x0000000C
++#define BR_ATOM_SHIFT		2
++#endif
+ #define BR_V		0x00000001
+ #define BR_V_SHIFT		 0
++#if defined (CONFIG_MPC8349)
+ #define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
++#elif defined (CONFIG_MPC8360)
++#define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V)
++#endif
+ 
+ #define OR0 0x5004
+ #define OR1 0x500C
+@@ -201,14 +227,21 @@
+ #define HRCWH_PCI_AGENT              0x00000000
+ #define HRCWH_PCI_HOST               0x80000000
+ 
++#if defined (CONFIG_MPC8349)
+ #define HRCWH_32_BIT_PCI             0x00000000
+ #define HRCWH_64_BIT_PCI             0x40000000
++#endif
+ 
+ #define HRCWH_PCI1_ARBITER_DISABLE   0x00000000
+ #define HRCWH_PCI1_ARBITER_ENABLE    0x20000000
+ 
++#if defined (CONFIG_MPC8349)
+ #define HRCWH_PCI2_ARBITER_DISABLE   0x00000000
+ #define HRCWH_PCI2_ARBITER_ENABLE    0x10000000
++#elif defined (CONFIG_MPC8360)
++#define HRCWH_PCICKDRV_DISABLE       0x00000000
++#define HRCWH_PCICKDRV_ENABLE        0x10000000
++#endif
+ 
+ #define HRCWH_CORE_DISABLE           0x08000000
+ #define HRCWH_CORE_ENABLE            0x00000000
+@@ -225,11 +258,14 @@
+ 
+ #define HRCWH_ROM_LOC_DDR_SDRAM      0x00000000
+ #define HRCWH_ROM_LOC_PCI1           0x00100000
++#if defined (CONFIG_MPC8349)
+ #define HRCWH_ROM_LOC_PCI2           0x00200000
++#endif
+ #define HRCWH_ROM_LOC_LOCAL_8BIT     0x00500000
+ #define HRCWH_ROM_LOC_LOCAL_16BIT    0x00600000
+ #define HRCWH_ROM_LOC_LOCAL_32BIT    0x00700000
+ 
++#if defined (CONFIG_MPC8349)
+ #define HRCWH_TSEC1M_IN_RGMII        0x00000000
+ #define HRCWH_TSEC1M_IN_RTBI         0x00004000
+ #define HRCWH_TSEC1M_IN_GMII         0x00008000
+@@ -239,10 +275,22 @@
+ #define HRCWH_TSEC2M_IN_RTBI         0x00001000
+ #define HRCWH_TSEC2M_IN_GMII         0x00002000
+ #define HRCWH_TSEC2M_IN_TBI          0x00003000
++#endif
++
++#if defined (CONFIG_MPC8360)
++#define HRCWH_SECONDARY_DDR_DISABLE  0x00000000
++#define HRCWH_SECONDARY_DDR_ENABLE   0x00000010
++#endif
+ 
+ #define HRCWH_BIG_ENDIAN             0x00000000
+ #define HRCWH_LITTLE_ENDIAN          0x00000008
+ 
++#define HRCWH_LALE_NORMAL            0x00000000
++#define HRCWH_LALE_EARLY             0x00000004
++
++#define HRCWH_LDP_SET                0x00000000
++#define HRCWH_LDP_CLEAR              0x00000002
++
+ /*
+  * Hard Reset Configration Word - Low
+  */
+@@ -281,6 +329,47 @@
+ #define HRCWL_CORE_TO_CSB_2_5X1      0x00050000
+ #define HRCWL_CORE_TO_CSB_3X1        0x00060000
+ 
++#if defined (CONFIG_MPC8360)
++#define HRCWL_CE_PLL_VCO_DIV_4       0x00000000
++#define HRCWL_CE_PLL_VCO_DIV_8       0x00000040
++#define HRCWL_CE_PLL_VCO_DIV_2       0x00000080
++
++#define HRCWL_CE_PLL_DIV_1X1         0x00000000
++#define HRCWL_CE_PLL_DIV_2X1         0x00000020
++
++#define HRCWL_CE_TO_PLL_1X16_        0x00000000
++#define HRCWL_CE_TO_PLL_1X2          0x00000002
++#define HRCWL_CE_TO_PLL_1X3          0x00000003
++#define HRCWL_CE_TO_PLL_1X4          0x00000004
++#define HRCWL_CE_TO_PLL_1X5          0x00000005
++#define HRCWL_CE_TO_PLL_1X6          0x00000006
++#define HRCWL_CE_TO_PLL_1X7          0x00000007
++#define HRCWL_CE_TO_PLL_1X8          0x00000008
++#define HRCWL_CE_TO_PLL_1X9          0x00000009
++#define HRCWL_CE_TO_PLL_1X10         0x0000000A
++#define HRCWL_CE_TO_PLL_1X11         0x0000000B
++#define HRCWL_CE_TO_PLL_1X12         0x0000000C
++#define HRCWL_CE_TO_PLL_1X13         0x0000000D
++#define HRCWL_CE_TO_PLL_1X14         0x0000000E
++#define HRCWL_CE_TO_PLL_1X15         0x0000000F
++#define HRCWL_CE_TO_PLL_1X16         0x00000010
++#define HRCWL_CE_TO_PLL_1X17         0x00000011
++#define HRCWL_CE_TO_PLL_1X18         0x00000012
++#define HRCWL_CE_TO_PLL_1X19         0x00000013
++#define HRCWL_CE_TO_PLL_1X20         0x00000014
++#define HRCWL_CE_TO_PLL_1X21         0x00000015
++#define HRCWL_CE_TO_PLL_1X22         0x00000016
++#define HRCWL_CE_TO_PLL_1X23         0x00000017
++#define HRCWL_CE_TO_PLL_1X24         0x00000018
++#define HRCWL_CE_TO_PLL_1X25         0x00000019
++#define HRCWL_CE_TO_PLL_1X26         0x0000001A
++#define HRCWL_CE_TO_PLL_1X27         0x0000001B
++#define HRCWL_CE_TO_PLL_1X28         0x0000001C
++#define HRCWL_CE_TO_PLL_1X29         0x0000001D
++#define HRCWL_CE_TO_PLL_1X30         0x0000001E
++#define HRCWL_CE_TO_PLL_1X31         0x0000001F
++#endif
++
+ /*
+  * LCRR - Clock Ratio Register (10.3.1.16)
+  */
+@@ -310,4 +399,31 @@
+ #define LCRR_CLKDIV_8  0x00000008
+ #define LCRR_CLKDIV_SHIFT       0
+ 
++/*
++ * SCCR-System Clock Control Register
++ */
++#define SCCR_TSEC1CM_0	0x00000000
++#define SCCR_TSEC1CM_1	0x40000000
++#define SCCR_TSEC1CM_2	0x80000000
++#define SCCR_TSEC1CM_3	0xC0000000
++#define SCCR_TSEC2CM_0	0x00000000
++#define SCCR_TSEC2CM_1	0x10000000
++#define SCCR_TSEC2CM_2	0x20000000
++#define SCCR_TSEC2CM_3	0x30000000
++#define SCCR_ENCCM_0	0x00000000
++#define SCCR_ENCCM_1	0x01000000
++#define SCCR_ENCCM_2	0x02000000
++#define SCCR_ENCCM_3	0x03000000
++#define SCCR_USBCM_0	0x00000000
++#define SCCR_USBCM_1	0x00500000
++#define SCCR_USBCM_2	0x00A00000
++#define SCCR_USBCM_3	0x00F00000
++
++#define SCCR_CLK_MASK	( SCCR_TSEC1CM_3	\
++			| SCCR_TSEC2CM_3	\
++			| SCCR_ENCCM_3		\
++			| SCCR_USBCM_3		)
++
++#define SCCR_DEFAULT	0xFFFFFFFF
++
+ #endif	/* __MPC83XX_H__ */
+diff -Naupr u-boot-1.1.6/include/ppc440.h u-boot-1.1.6-fsl-1/include/ppc440.h
+--- u-boot-1.1.6/include/ppc440.h	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/include/ppc440.h	2006-12-06 10:33:49.000000000 -0600
+@@ -1350,26 +1350,26 @@
+ 
+ #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ #define UIC2_DCR_BASE 0xe0
+-#define uic2sr	(UIC0_DCR_BASE+0x0)   /* UIC2 status-Read Clear		*/
+-#define uic2srs	(UIC0_DCR_BASE+0x1)   /* UIC2 status-Read Set */
+-#define uic2er	(UIC0_DCR_BASE+0x2)   /* UIC2 enable			*/
+-#define uic2cr	(UIC0_DCR_BASE+0x3)   /* UIC2 critical			*/
+-#define uic2pr	(UIC0_DCR_BASE+0x4)   /* UIC2 polarity			*/
+-#define uic2tr	(UIC0_DCR_BASE+0x5)   /* UIC2 triggering		*/
+-#define uic2msr (UIC0_DCR_BASE+0x6)   /* UIC2 masked status		*/
+-#define uic2vr	(UIC0_DCR_BASE+0x7)   /* UIC2 vector			*/
+-#define uic2vcr (UIC0_DCR_BASE+0x8)   /* UIC2 vector configuration	*/
++#define uic2sr	(UIC2_DCR_BASE+0x0)   /* UIC2 status-Read Clear		*/
++#define uic2srs	(UIC2_DCR_BASE+0x1)   /* UIC2 status-Read Set */
++#define uic2er	(UIC2_DCR_BASE+0x2)   /* UIC2 enable			*/
++#define uic2cr	(UIC2_DCR_BASE+0x3)   /* UIC2 critical			*/
++#define uic2pr	(UIC2_DCR_BASE+0x4)   /* UIC2 polarity			*/
++#define uic2tr	(UIC2_DCR_BASE+0x5)   /* UIC2 triggering		*/
++#define uic2msr (UIC2_DCR_BASE+0x6)   /* UIC2 masked status		*/
++#define uic2vr	(UIC2_DCR_BASE+0x7)   /* UIC2 vector			*/
++#define uic2vcr (UIC2_DCR_BASE+0x8)   /* UIC2 vector configuration	*/
+ 
+ #define UIC3_DCR_BASE 0xf0
+-#define uic3sr	(UIC1_DCR_BASE+0x0)   /* UIC3 status-Read Clear		*/
+-#define uic3srs	(UIC0_DCR_BASE+0x1)   /* UIC3 status-Read Set */
+-#define uic3er	(UIC1_DCR_BASE+0x2)   /* UIC3 enable			*/
+-#define uic3cr	(UIC1_DCR_BASE+0x3)   /* UIC3 critical			*/
+-#define uic3pr	(UIC1_DCR_BASE+0x4)   /* UIC3 polarity			*/
+-#define uic3tr	(UIC1_DCR_BASE+0x5)   /* UIC3 triggering		*/
+-#define uic3msr (UIC1_DCR_BASE+0x6)   /* UIC3 masked status		*/
+-#define uic3vr	(UIC1_DCR_BASE+0x7)   /* UIC3 vector			*/
+-#define uic3vcr (UIC1_DCR_BASE+0x8)   /* UIC3 vector configuration	*/
++#define uic3sr	(UIC3_DCR_BASE+0x0)   /* UIC3 status-Read Clear		*/
++#define uic3srs	(UIC3_DCR_BASE+0x1)   /* UIC3 status-Read Set */
++#define uic3er	(UIC3_DCR_BASE+0x2)   /* UIC3 enable			*/
++#define uic3cr	(UIC3_DCR_BASE+0x3)   /* UIC3 critical			*/
++#define uic3pr	(UIC3_DCR_BASE+0x4)   /* UIC3 polarity			*/
++#define uic3tr	(UIC3_DCR_BASE+0x5)   /* UIC3 triggering		*/
++#define uic3msr (UIC3_DCR_BASE+0x6)   /* UIC3 masked status		*/
++#define uic3vr	(UIC3_DCR_BASE+0x7)   /* UIC3 vector			*/
++#define uic3vcr (UIC3_DCR_BASE+0x8)   /* UIC3 vector configuration	*/
+ #endif /* CONFIG_440SPE */
+ 
+ #if defined(CONFIG_440GX)
+@@ -3183,7 +3183,7 @@
+ #define GPIO0			0
+ #define GPIO1			1
+ 
+-#if defined(CONFIG_440GP)
++#if defined(CONFIG_440GP) || defined(CONFIG_440GX)
+ #define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000700)
+ 
+ #define GPIO0_OR               (GPIO0_BASE+0x0)
+diff -Naupr u-boot-1.1.6/lib_ppc/board.c u-boot-1.1.6-fsl-1/lib_ppc/board.c
+--- u-boot-1.1.6/lib_ppc/board.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/lib_ppc/board.c	2006-12-06 10:33:49.000000000 -0600
+@@ -511,7 +511,7 @@ void board_init_f (ulong bootflag)
+ 	bd->bi_mbar_base = CFG_MBAR;	/* base of internal registers */
+ #endif
+ #if defined(CONFIG_MPC83XX)
+-	bd->bi_immrbar = CFG_IMMRBAR;
++	bd->bi_immrbar = CFG_IMMR;
+ #endif
+ #if defined(CONFIG_MPC8220)
+ 	bd->bi_mbar_base = CFG_MBAR;	/* base of internal registers */
+@@ -521,17 +521,17 @@ void board_init_f (ulong bootflag)
+ 	bd->bi_pevfreq   = gd->pev_clk;
+ 	bd->bi_flbfreq   = gd->flb_clk;
+ 
+-    /* store bootparam to sram (backward compatible), here? */
+-    {
+-	u32 *sram = (u32 *)CFG_SRAM_BASE;
+-	*sram++ = gd->ram_size;
+-	*sram++ = gd->bus_clk;
+-	*sram++ = gd->inp_clk;
+-	*sram++ = gd->cpu_clk;
+-	*sram++ = gd->vco_clk;
+-	*sram++ = gd->flb_clk;
+-	*sram++ = 0xb8c3ba11;  /* boot signature */
+-    }
++	/* store bootparam to sram (backward compatible), here? */
++	{
++		u32 *sram = (u32 *)CFG_SRAM_BASE;
++		*sram++ = gd->ram_size;
++		*sram++ = gd->bus_clk;
++		*sram++ = gd->inp_clk;
++		*sram++ = gd->cpu_clk;
++		*sram++ = gd->vco_clk;
++		*sram++ = gd->flb_clk;
++		*sram++ = 0xb8c3ba11;  /* boot signature */
++	}
+ #endif
+ 
+ 	bd->bi_bootflags = bootflag;	/* boot / reboot flag (for LynxOS)    */
+diff -Naupr u-boot-1.1.6/MAINTAINERS u-boot-1.1.6-fsl-1/MAINTAINERS
+--- u-boot-1.1.6/MAINTAINERS	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/MAINTAINERS	2006-12-06 10:33:48.000000000 -0600
+@@ -277,10 +277,13 @@ Daniel Poirot <dan.poirot@windriver.com>
+ 
+ Stefan Roese <sr@denx.de>
+ 
++	P3M7448			MPC7448
++
+ 	uc100			MPC857
+ 
+ 	TQM85xx			MPC8540/8541/8555/8560
+ 
++	alpr			PPC440GX
+ 	bamboo			PPC440EP
+ 	bunbinga		PPC405EP
+ 	ebony			PPC440GP
+@@ -293,6 +296,8 @@ Stefan Roese <sr@denx.de>
+ 	yellowstone		PPC440GR
+ 	yosemite		PPC440EP
+ 
++	P3M750			PPC750FX/GX/GL
++
+ Yusdi Santoso <yusdi_santoso@adaptec.com>
+ 
+ 	HIDDEN_DRAGON	MPC8241/MPC8245
+@@ -339,6 +344,18 @@ John Zhan <zhanz@sinovee.com>
+ 
+ 	svm_sc8xx		MPC8xx
+ 
++Timur Tabi <timur@freescale.com>
++
++	MPC8349E-mITX		MPC8349
++
++Kim Phillips <kim.phillips@freescale.com>
++
++	MPC8349EMDS		MPC8349
++
++Dave Liu <daveliu@freescale.com>
++
++	MPC8360EMDS		MPC8360
++
+ -------------------------------------------------------------------------
+ 
+ Unknown / orphaned boards:
+diff -Naupr u-boot-1.1.6/MAKEALL u-boot-1.1.6-fsl-1/MAKEALL
+--- u-boot-1.1.6/MAKEALL	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/MAKEALL	2006-12-06 10:33:48.000000000 -0600
+@@ -74,21 +74,21 @@ LIST_8xx="	\
+ #########################################################################
+ 
+ LIST_4xx="	\
+-	ADCIOP		AP1000		AR405		ASH405		\
+-	bamboo		bubinga		CANBT		CMS700		\
+-	CPCI2DP		CPCI405		CPCI4052	CPCI405AB	\
+-	CPCI405DT	CPCI440		CPCIISER4	CRAYL1		\
+-	csb272		csb472		DASA_SIM	DP405		\
+-	DU405		ebony		ERIC		EXBITGEN	\
+-	G2000		HH405		HUB405		JSE		\
+-	KAREF		luan		METROBOX	MIP405		\
+-	MIP405T		ML2		ml300		ocotea		\
+-	OCRTC		ORSG		p3p440		PCI405		\
+-	pcs440ep	PIP405		PLU405		PMC405		\
+-	PPChameleonEVB	sbc405		sequoia		sequoia_nand	\
+-	VOH405		VOM405		W7OLMC		W7OLMG		\
+-	walnut		WUH405		XPEDITE1K	yellowstone	\
+-	yosemite	yucca		bamboo		\
++	ADCIOP		alpr		AP1000		AR405		\
++	ASH405		bamboo		bubinga		CANBT		\
++	CMS700		CPCI2DP		CPCI405		CPCI4052	\
++	CPCI405AB	CPCI405DT	CPCI440		CPCIISER4	\
++	CRAYL1		csb272		csb472		DASA_SIM	\
++	DP405		DU405		ebony		ERIC		\
++	EXBITGEN	G2000		HH405		HUB405		\
++	JSE		KAREF		luan		METROBOX	\
++	MIP405		MIP405T		ML2		ml300		\
++	ocotea		OCRTC		ORSG		p3p440		\
++	PCI405		pcs440ep	PIP405		PLU405		\
++	PMC405		PPChameleonEVB	sbc405		sequoia		\
++	sequoia_nand	VOH405		VOM405		W7OLMC		\
++	W7OLMG		walnut		WUH405		XPEDITE1K	\
++	yellowstone	yosemite	yucca				\
+ "
+ 
+ #########################################################################
+@@ -130,7 +130,7 @@ LIST_8260="	\
+ #########################################################################
+ 
+ LIST_83xx="	\
+-	TQM834x		MPC8349EMDS					\
++	TQM834x		MPC8349EMDS	MPC8349ITX	MPC8360EMDS	\
+ "
+ 
+ 
+@@ -151,11 +151,12 @@ LIST_85xx="	\
+ 
+ LIST_74xx="	\
+ 	DB64360		DB64460		EVB64260	P3G4		\
+-	PCIPPC2		PCIPPC6		ZUMA				\
++	p3m7448		PCIPPC2		PCIPPC6		ZUMA		\
+ "
+ 
+ LIST_7xx="	\
+-	BAB7xx		CPCI750		ELPPC		ppmc7xx		\
++	BAB7xx		CPCI750		ELPPC		p3m750		\
++	ppmc7xx								\
+ "
+ 
+ LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
+diff -Naupr u-boot-1.1.6/Makefile u-boot-1.1.6-fsl-1/Makefile
+--- u-boot-1.1.6/Makefile	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/Makefile	2006-12-06 10:33:48.000000000 -0600
+@@ -93,7 +93,7 @@ MKCONFIG	:= $(SRCTREE)/mkconfig
+ export MKCONFIG
+ 
+ ifneq ($(OBJTREE),$(SRCTREE))
+-REMOTE_BUILD 	:= 1
++REMOTE_BUILD	:= 1
+ export REMOTE_BUILD
+ endif
+ 
+@@ -174,9 +174,6 @@ endif
+ ifeq ($(CPU),ppc4xx)
+ OBJS += cpu/$(CPU)/resetvec.o
+ endif
+-ifeq ($(CPU),mpc83xx)
+-OBJS += cpu/$(CPU)/resetvec.o
+-endif
+ ifeq ($(CPU),mpc85xx)
+ OBJS += cpu/$(CPU)/resetvec.o
+ endif
+@@ -206,6 +203,9 @@ LIBS += dtt/libdtt.a
+ LIBS += drivers/libdrivers.a
+ LIBS += drivers/nand/libnand.a
+ LIBS += drivers/nand_legacy/libnand_legacy.a
++ifeq ($(CPU),mpc83xx)
++LIBS += drivers/qe/qe.a
++endif
+ LIBS += drivers/sk98lin/libsk98lin.a
+ LIBS += post/libpost.a post/cpu/libcpu.a
+ LIBS += common/libcommon.a
+@@ -378,8 +378,8 @@ Lite5200_LOWBOOT08_config		\
+ icecube_5200_config			\
+ icecube_5200_LOWBOOT_config		\
+ icecube_5200_LOWBOOT08_config		\
+-icecube_5200_DDR_config 		\
+-icecube_5200_DDR_LOWBOOT_config 	\
++icecube_5200_DDR_config			\
++icecube_5200_DDR_LOWBOOT_config		\
+ icecube_5200_DDR_LOWBOOT08_config	\
+ icecube_5100_config:			unconfig
+ 	@mkdir -p $(obj)include
+@@ -412,7 +412,7 @@ icecube_5100_config:			unconfig
+ 	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+ 
+ v38b_config: unconfig
+-	@./mkconfig -a V38B ppc mpc5xxx v38b
++	@./mkconfig -a v38b ppc mpc5xxx v38b
+ 
+ inka4x0_config:	unconfig
+ 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
+@@ -458,7 +458,7 @@ prs200_highboot_DDR_config:	unconfig
+ 	@[ -n "$(findstring _SDRAM,$@)" ] || \
+ 		{ if [ -n "$(findstring mcc200,$@)" ]; \
+ 		  then \
+-		  	echo "... with DDR" ; \
++			echo "... with DDR" ; \
+ 		  else \
+ 			if [ -n "$(findstring _DDR,$@)" ];\
+ 			then \
+@@ -865,9 +865,9 @@ RPXClassic_config:	unconfig
+ RPXlite_config:		unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
+ 
+-RPXlite_DW_64_config  		\
+-RPXlite_DW_LCD_config 		\
+-RPXlite_DW_64_LCD_config 	\
++RPXlite_DW_64_config		\
++RPXlite_DW_LCD_config		\
++RPXlite_DW_64_LCD_config	\
+ RPXlite_DW_NVRAM_config		\
+ RPXlite_DW_NVRAM_64_config      \
+ RPXlite_DW_NVRAM_LCD_config	\
+@@ -880,12 +880,12 @@ RPXlite_DW_config:         unconfig
+ 		  echo "... with 64MHz system clock ..."; \
+ 		}
+ 	@[ -z "$(findstring _LCD,$@)" ] || \
+-		{ echo "#define CONFIG_LCD"          	>>$(obj)include/config.h ; \
++		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
+ 		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
+ 		  echo "... with LCD display ..."; \
+ 		}
+ 	@[ -z "$(findstring _NVRAM,$@)" ] || \
+-		{ echo "#define  CFG_ENV_IS_IN_NVRAM" 	>>$(obj)include/config.h ; \
++		{ echo "#define  CFG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
+ 		  echo "... with ENV in NVRAM ..."; \
+ 		}
+ 	@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
+@@ -984,6 +984,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$
+ ADCIOP_config:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
+ 
++alpr_config:	unconfig
++	@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
++
+ AP1000_config:unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
+ 
+@@ -1585,15 +1588,39 @@ r5200_config :		unconfig
+ ## MPC83xx Systems
+ #########################################################################
+ 
+-MPC8349ADS_config:	unconfig
+-	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads
+-
+ TQM834x_config:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
+ 
+ MPC8349EMDS_config:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
+ 
++MPC8360EMDS_config \
++MPC8360EMDS_HOST_33_config \
++MPC8360EMDS_HOST_66_config \
++MPC8360EMDS_SLAVE_config:	unconfig
++	@echo "" >include/config.h ; \
++	if [ "$(findstring _HOST_,$@)" ] ; then \
++		echo -n "... PCI HOST " ; \
++		echo "#define CONFIG_PCI" >>include/config.h ; \
++	fi ; \
++	if [ "$(findstring _SLAVE_,$@)" ] ; then \
++		echo "...PCI SLAVE 66M"  ; \
++		echo "#define CONFIG_PCI" >>include/config.h ; \
++		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
++	fi ; \
++	if [ "$(findstring _33_,$@)" ] ; then \
++		echo -n "...33M ..." ; \
++		echo "#define PCI_33M" >>include/config.h ; \
++	fi ; \
++	if [ "$(findstring _66_,$@)" ] ; then \
++		echo -n "...66M..." ; \
++		echo "#define PCI_66M" >>include/config.h ; \
++	fi ;
++	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
++
++MPC8349ITX_config:	unconfig
++	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
++
+ #########################################################################
+ ## MPC85xx Systems
+ #########################################################################
+@@ -1721,6 +1748,16 @@ EVB64260_750CX_config:	unconfig
+ P3G4_config: unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ 
++p3m750_config	\
++p3m7448_config:		unconfig
++	@mkdir -p $(obj)include
++	@if [ "$(findstring 750_,$@)" ] ; then \
++		echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
++	else \
++		echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
++	fi
++	@$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
++
+ PCIPPC2_config \
+ PCIPPC6_config: unconfig
+ 	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
+@@ -1784,7 +1821,7 @@ ap966_config		\
+ ap922_config		\
+ ap922_XA10_config	\
+ ap7_config		\
+-ap720t_config  		\
++ap720t_config		\
+ ap920t_config		\
+ ap926ejs_config		\
+ ap946es_config: unconfig
+@@ -1941,7 +1978,7 @@ cm4008_config	:	unconfig
+ cm41xx_config	:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
+ 
+-gth2_config		: 	unconfig
++gth2_config		:	unconfig
+ 	@mkdir -p $(obj)include
+ 	@ >$(obj)include/config.h
+ 	@echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
+@@ -2087,19 +2124,19 @@ tb0229_config: unconfig
+ #########################################################################
+ ## MIPS32 AU1X00
+ #########################################################################
+-dbau1000_config		: 	unconfig
++dbau1000_config		:	unconfig
+ 	@mkdir -p $(obj)include
+ 	@ >$(obj)include/config.h
+ 	@echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
+ 	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
+ 
+-dbau1100_config		: 	unconfig
++dbau1100_config		:	unconfig
+ 	@mkdir -p $(obj)include
+ 	@ >$(obj)include/config.h
+ 	@echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
+ 	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
+ 
+-dbau1500_config		: 	unconfig
++dbau1500_config		:	unconfig
+ 	@mkdir -p $(obj)include
+ 	@ >$(obj)include/config.h
+ 	@echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
+@@ -2117,7 +2154,7 @@ dbau1550_el_config	:	unconfig
+ 	@echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ 	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
+ 
+-pb1000_config		: 	unconfig
++pb1000_config		:	unconfig
+ 	@mkdir -p $(obj)include
+ 	@ >$(obj)include/config.h
+ 	@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
+diff -Naupr u-boot-1.1.6/net/eth.c u-boot-1.1.6-fsl-1/net/eth.c
+--- u-boot-1.1.6/net/eth.c	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/net/eth.c	2006-12-06 10:33:49.000000000 -0600
+@@ -54,6 +54,7 @@ extern int scc_initialize(bd_t*);
+ extern int skge_initialize(bd_t*);
+ extern int tsec_initialize(bd_t*, int, char *);
+ extern int npe_initialize(bd_t *);
++extern int uec_initialize(int);
+ 
+ static struct eth_device *eth_devices, *eth_current;
+ 
+@@ -142,13 +143,10 @@ int eth_initialize(bd_t *bis)
+ 	miiphy_init();
+ #endif
+ 
+-#ifdef CONFIG_DB64360
++#if defined(CONFIG_DB64360) || defined(CONFIG_CPCI750)
+ 	mv6436x_eth_initialize(bis);
+ #endif
+-#ifdef CONFIG_CPCI750
+-	mv6436x_eth_initialize(bis);
+-#endif
+-#ifdef CONFIG_DB64460
++#if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx)
+ 	mv6446x_eth_initialize(bis);
+ #endif
+ #if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000)
+@@ -196,6 +194,12 @@ int eth_initialize(bd_t *bis)
+ 	tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME);
+ #    endif
+ #endif
++#if defined(CONFIG_UEC_ETH1)
++	uec_initialize(0);
++#endif
++#if defined(CONFIG_UEC_ETH2)
++	uec_initialize(1);
++#endif
+ #if defined(CONFIG_MPC86XX_TSEC1)
+        tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME);
+ #endif
+diff -Naupr u-boot-1.1.6/README u-boot-1.1.6-fsl-1/README
+--- u-boot-1.1.6/README	2006-11-02 08:15:01.000000000 -0600
++++ u-boot-1.1.6-fsl-1/README	2006-11-30 12:34:13.000000000 -0600
+@@ -1207,7 +1207,12 @@ The following options need to be configu
+ 		clock chips. See common/cmd_i2c.c for a description of the
+ 		command line interface.
+ 
+-		CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
++		CONFIG_I2C_CMD_TREE is a recommended option that places
++		all I2C commands under a single 'i2c' root command.  The
++		older 'imm', 'imd', 'iprobe' etc. commands are considered
++		deprecated and may disappear in the future.
++
++		CONFIG_HARD_I2C selects a hardware I2C controller.
+ 
+ 		CONFIG_SOFT_I2C configures u-boot to use a software (aka
+ 		bit-banging) driver instead of CPM or similar hardware
+@@ -1312,6 +1317,42 @@ The following options need to be configu
+ 		in u-boot bd_info structure based on u-boot environment
+ 		variable "i2cfast". (see also i2cfast)
+ 
++		CONFIG_I2C_MULTI_BUS
++
++		This option allows the use of multiple I2C buses, each of which
++		must have a controller.  At any point in time, only one bus is
++		active.  To switch to a different bus, use the 'i2c dev' command.
++		Note that bus numbering is zero-based.
++
++		CFG_I2C_NOPROBES
++
++		This option specifies a list of I2C devices that will be skipped
++		when the 'i2c probe' command is issued (or 'iprobe' using the legacy
++		command).  If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device
++		pairs.  Otherwise, specify a 1D array of device addresses
++
++		e.g.
++			#undef	CONFIG_I2C_MULTI_BUS
++			#define CFG_I2C_NOPROBES	{0x50,0x68}
++
++		will skip addresses 0x50 and 0x68 on a board with one I2C bus
++
++			#define	CONFIG_I2C_MULTI_BUS
++			#define CFG_I2C_MULTI_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
++
++		will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
++
++		CFG_SPD_BUS_NUM
++
++		If defined, then this indicates the I2C bus number for DDR SPD.
++		If not defined, then U-Boot assumes that SPD is on I2C bus 0.
++
++		CONFIG_FSL_I2C
++
++		Define this option if you want to use Freescale's I2C driver in
++		drivers/fsl_i2c.c.
++
++
+ - SPI Support:	CONFIG_SPI
+ 
+ 		Enables SPI driver (so far only tested with
+@@ -1470,8 +1511,8 @@ The following options need to be configu
+ 
+ 		Enable auto completion of commands using TAB.
+ 
+-                Note that this feature has NOT been implemented yet
+-                for the "hush" shell.
++		Note that this feature has NOT been implemented yet
++		for the "hush" shell.
+ 
+ 
+ 		CFG_HUSH_PARSER
+@@ -2209,6 +2250,24 @@ Low Level (hardware related) configurati
+   CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
+ 		Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
+ 
++- CONFIG_SPD_EEPROM
++		Get DDR timing information from an I2C EEPROM.  Common with pluggable
++		memory modules such as SODIMMs
++  SPD_EEPROM_ADDRESS
++		I2C address of the SPD EEPROM
++
++- CFG_SPD_BUS_NUM
++		If SPD EEPROM is on an I2C bus other than the first one, specify here.
++		Note that the value must resolve to something your driver can deal with.
++
++- CFG_83XX_DDR_USES_CS0
++		Only for 83xx systems. If specified, then DDR should be configured
++		using CS0 and CS1 instead of CS2 and CS3.
++
++- CFG_83XX_DDR_USES_CS0
++		Only for 83xx systems. If specified, then DDR should be configured
++		using CS0 and CS1 instead of CS2 and CS3.
++
+ - CONFIG_ETHER_ON_FEC[12]
+ 		Define to enable FEC[12] on a 8xx series processor.
+ 
+@@ -3114,11 +3173,11 @@ loadaddr=200000
+ oftaddr=0x300000
+ => bootm $loadaddr - $oftaddr
+ ## Booting image at 00200000 ...
+-   Image Name:   Linux-2.6.17-dirty
+-   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+-   Data Size:    1029343 Bytes = 1005.2 kB
++   Image Name:	 Linux-2.6.17-dirty
++   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
++   Data Size:	 1029343 Bytes = 1005.2 kB
+    Load Address: 00000000
+-   Entry Point:  00000000
++   Entry Point:	 00000000
+    Verifying Checksum ... OK
+    Uncompressing Kernel Image ... OK
+ Booting using flat device tree at 0x300000
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch
new file mode 100644
index 0000000000..30981dc43c
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch
@@ -0,0 +1,3640 @@
+ce4d6db21531bc35da7180436c6f49efac7c0461
+diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
+index 36d901f..9c35e22 100644
+--- a/board/tqm834x/tqm834x.c
++++ b/board/tqm834x/tqm834x.c
+@@ -148,14 +148,14 @@ int checkboard (void)
+ 	u32 w, f;
+ 
+ 	immr = (immap_t *)CFG_IMMR;
+-	if (!(immr->reset.rcwh & RCWH_PCIHOST)) {
++	if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
+ 		printf("PCI:   NOT in host mode..?!\n");
+ 		return 0;
+ 	}
+ 
+ 	/* get bus width */
+ 	w = 32;
+-	if (immr->reset.rcwh & RCWH_PCI64)
++	if (immr->reset.rcwh & HRCWH_64_BIT_PCI)
+ 		w = 64;
+ 
+ 	/* get clock */
+diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
+index e5725fb..7574fab 100644
+--- a/cpu/mpc83xx/cpu_init.c
++++ b/cpu/mpc83xx/cpu_init.c
+@@ -202,12 +202,12 @@ void cpu_init_f (volatile immap_t * im)
+ 	im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM;
+ #endif
+ #ifdef CFG_GPIO1_PRELIM
+-	im->pgio[0].dir = CFG_GPIO1_DIR;
+-	im->pgio[0].dat = CFG_GPIO1_DAT;
++	im->gpio[0].dir = CFG_GPIO1_DIR;
++	im->gpio[0].dat = CFG_GPIO1_DAT;
+ #endif
+ #ifdef CFG_GPIO2_PRELIM
+-	im->pgio[1].dir = CFG_GPIO2_DIR;
+-	im->pgio[1].dat = CFG_GPIO2_DAT;
++	im->gpio[1].dir = CFG_GPIO2_DIR;
++	im->gpio[1].dat = CFG_GPIO2_DAT;
+ #endif
+ }
+ 
+diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
+index ebe3487..8b3937a 100644
+--- a/cpu/mpc83xx/qe_io.c
++++ b/cpu/mpc83xx/qe_io.c
+@@ -35,7 +35,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+ 	u32			pin_1bit_mask;
+ 	u32			tmp_val;
+ 	volatile immap_t	*im = (volatile immap_t *)CFG_IMMR;
+-	volatile gpio83xx_t	*par_io =(volatile gpio83xx_t *)&im->gpio;
++	volatile qepio83xx_t	*par_io = (volatile qepio83xx_t *)&im->qepio;
+ 
+ 	/* Caculate pin location and 2bit mask and dir */
+ 	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
+index 7e53b1e..40ba6b0 100644
+--- a/cpu/mpc83xx/speed.c
++++ b/cpu/mpc83xx/speed.c
+@@ -139,7 +139,7 @@ int get_clocks(void)
+ #endif
+ 	}
+ 
+-	spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
++	spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT);
+ 	csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
+ 
+ 	sccr = im->clk.sccr;
+@@ -251,7 +251,7 @@ int get_clocks(void)
+ 	}
+ #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
+ 	lbiu_clk = csb_clk *
+-	           (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
++	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+ #else
+ #error Unknown MPC83xx chip
+ #endif
+@@ -268,11 +268,11 @@ int get_clocks(void)
+ 	}
+ #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
+ 	ddr_clk = csb_clk *
+-		  (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
+-	corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
++		  (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
++	corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
+ #if defined (CONFIG_MPC8360)
+ 	ddr_sec_clk = csb_clk * (1 +
+-		       ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
++		       ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+ #endif
+ #else
+ #error Unknown MPC83xx chip
+@@ -307,8 +307,8 @@ int get_clocks(void)
+ 	}
+ 
+ #if defined (CONFIG_MPC8360)
+-	qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
+-	qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
++	qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
++	qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
+ 	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
+ 	brg_clk = qe_clk / 2;
+ #endif
+diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
+index 43cde5e..67b035c 100644
+--- a/include/asm-ppc/immap_83xx.h
++++ b/include/asm-ppc/immap_83xx.h
+@@ -3,20 +3,11 @@
+  *
+  * MPC83xx Internal Memory Map
+  *
+- * History :
+- * 20060601: Daveliu (daveliu@freescale.com)
+- *	     TanyaJiang (tanya.jiang@freescale.com)
+- *	     Unified variable names for mpc83xx
+- * 2005	   : Mandy Lavi (mandy.lavi@freescale.com)
+- *	     support for mpc8360e
+- * 2004	   : Eran Liberty (liberty@freescale.com)
+- *	     Initialized for mpc8349
+- *	     based on:
+- *	     MPC8260 Internal Memory Map
+- *	     Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+- *	     MPC85xx Internal Memory Map
+- *	     Copyright(c) 2002,2003 Motorola Inc.
+- *	     Xianghua Xiao (x.xiao@motorola.com)
++ * Contributors:
++ *	Dave Liu <daveliu@freescale.com>
++ *	Tanya Jiang <tanya.jiang@freescale.com>
++ *	Mandy Lavi <mandy.lavi@freescale.com>
++ *	Eran Liberty <liberty@freescale.com>
+  *
+  * This program is free software; you can redistribute it and/or
+  * modify it under the terms of the GNU General Public License as
+@@ -25,7 +16,7 @@
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+@@ -37,36 +28,24 @@
+ #ifndef __IMMAP_83xx__
+ #define __IMMAP_83xx__
+ 
+-#include <config.h>
+ #include <asm/types.h>
+ #include <asm/fsl_i2c.h>
+ 
+ /*
+- * Local Access Window.
++ * Local Access Window
+  */
+ typedef struct law83xx {
+ 	u32 bar;		/* LBIU local access window base address register */
+-/* Identifies the 20 most-significant address bits of the base of local
+- * access window n. The specified base address should be aligned to the
+- * window size, as defined by LBLAWARn[SIZE].
+- */
+-#define LAWBAR_BAR	   0xFFFFF000
+-#define LAWBAR_RES	     ~(LAWBAR_BAR)
+ 	u32 ar;			/* LBIU local access window attribute register */
+ } law83xx_t;
+ 
+ /*
+- * System configuration registers.
++ * System configuration registers
+  */
+ typedef struct sysconf83xx {
+ 	u32 immrbar;		/* Internal memory map base address register */
+ 	u8 res0[0x04];
+ 	u32 altcbar;		/* Alternate configuration base address register */
+-/* Identifies the12 most significant address bits of an alternate base
+- * address used for boot sequencer configuration accesses.
+- */
+-#define ALTCBAR_BASE_ADDR     0xFFF00000
+-#define ALTCBAR_RES	      ~(ALTCBAR_BASE_ADDR)	/* Reserved. Write has no effect, read returns 0. */
+ 	u8 res1[0x14];
+ 	law83xx_t lblaw[4];	/* LBIU local access window */
+ 	u8 res2[0x20];
+@@ -77,115 +56,10 @@ typedef struct sysconf83xx {
+ 	u32 sgprl;		/* System General Purpose Register Low */
+ 	u32 sgprh;		/* System General Purpose Register High */
+ 	u32 spridr;		/* System Part and Revision ID Register */
+-#define SPRIDR_PARTID	      0xFFFF0000	/* Part Identification. */
+-#define SPRIDR_REVID	      0x0000FFFF	/* Revision Identification. */
+ 	u8 res5[0x04];
+ 	u32 spcr;		/* System Priority Configuration Register */
+-#define SPCR_PCIHPE   0x10000000	/* PCI Highest Priority Enable. */
+-#define SPCR_PCIHPE_SHIFT	(31-3)
+-#define SPCR_PCIPR    0x03000000	/* PCI bridge system bus request priority. */
+-#define SPCR_PCIPR_SHIFT	(31-7)
+-#define SPCR_OPT      0x00800000	/* Optimize */
+-#define SPCR_TBEN     0x00400000	/* E300 PowerPC core time base unit enable. */
+-#define SPCR_TBEN_SHIFT		(31-9)
+-#define SPCR_COREPR   0x00300000	/* E300 PowerPC Core system bus request priority. */
+-#define SPCR_COREPR_SHIFT	(31-11)
+-#if defined (CONFIG_MPC8349)
+-#define SPCR_TSEC1DP  0x00003000	/* TSEC1 data priority. */
+-#define SPCR_TSEC1DP_SHIFT	(31-19)
+-#define SPCR_TSEC1BDP 0x00000C00	/* TSEC1 buffer descriptor priority. */
+-#define SPCR_TSEC1BDP_SHIFT	(31-21)
+-#define SPCR_TSEC1EP  0x00000300	/* TSEC1 emergency priority. */
+-#define SPCR_TSEC1EP_SHIFT	(31-23)
+-#define SPCR_TSEC2DP  0x00000030	/* TSEC2 data priority. */
+-#define SPCR_TSEC2DP_SHIFT	(31-27)
+-#define SPCR_TSEC2BDP 0x0000000C	/* TSEC2 buffer descriptor priority. */
+-#define SPCR_TSEC2BDP_SHIFT	(31-29)
+-#define SPCR_TSEC2EP  0x00000003	/* TSEC2 emergency priority. */
+-#define SPCR_TSEC2EP_SHIFT	(31-31)
+-#define SPCR_RES      ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
+-			| SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
+-			| SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
+-#elif defined (CONFIG_MPC8360)
+-#define SPCR_RES      ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR)
+-#endif
+-	u32 sicrl;		/* System General Purpose Register Low */
+-#if defined (CONFIG_MPC8349)
+-#define SICRL_LDP_A   0x80000000
+-#define SICRL_USB1    0x40000000
+-#define SICRL_USB0    0x20000000
+-#define SICRL_UART    0x0C000000
+-#define SICRL_GPIO1_A 0x02000000
+-#define SICRL_GPIO1_B 0x01000000
+-#define SICRL_GPIO1_C 0x00800000
+-#define SICRL_GPIO1_D 0x00400000
+-#define SICRL_GPIO1_E 0x00200000
+-#define SICRL_GPIO1_F 0x00180000
+-#define SICRL_GPIO1_G 0x00040000
+-#define SICRL_GPIO1_H 0x00020000
+-#define SICRL_GPIO1_I 0x00010000
+-#define SICRL_GPIO1_J 0x00008000
+-#define SICRL_GPIO1_K 0x00004000
+-#define SICRL_GPIO1_L 0x00003000
+-#define SICRL_RES ~(SICRL_LDP_A | SICRL_USB0 | SICRL_USB1 | SICRL_UART \
+-			| SICRL_GPIO1_A | SICRL_GPIO1_B | SICRL_GPIO1_C \
+-			| SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \
+-			| SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \
+-			| SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L )
+-#elif defined (CONFIG_MPC8360)
+-#define SICRL_LDP_A   0xC0000000
+-#define SICRL_LCLK_1  0x10000000
+-#define SICRL_LCLK_2  0x08000000
+-#define SICRL_SRCID_A 0x03000000
+-#define SICRL_IRQ_CKSTP_A 0x00C00000
+-#define SICRL_RES     ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \
+-			SICRL_SRCID_A | SICRL_IRQ_CKSTP_A)
+-#endif
+-	u32 sicrh;		/* System General Purpose Register High */
+-#define SICRH_DDR     0x80000000
+-#if defined (CONFIG_MPC8349)
+-#define SICRH_TSEC1_A 0x10000000
+-#define SICRH_TSEC1_B 0x08000000
+-#define SICRH_TSEC1_C 0x04000000
+-#define SICRH_TSEC1_D 0x02000000
+-#define SICRH_TSEC1_E 0x01000000
+-#define SICRH_TSEC1_F 0x00800000
+-#define SICRH_TSEC2_A 0x00400000
+-#define SICRH_TSEC2_B 0x00200000
+-#define SICRH_TSEC2_C 0x00100000
+-#define SICRH_TSEC2_D 0x00080000
+-#define SICRH_TSEC2_E 0x00040000
+-#define SICRH_TSEC2_F 0x00020000
+-#define SICRH_TSEC2_G 0x00010000
+-#define SICRH_TSEC2_H 0x00008000
+-#define SICRH_GPIO2_A 0x00004000
+-#define SICRH_GPIO2_B 0x00002000
+-#define SICRH_GPIO2_C 0x00001000
+-#define SICRH_GPIO2_D 0x00000800
+-#define SICRH_GPIO2_E 0x00000400
+-#define SICRH_GPIO2_F 0x00000200
+-#define SICRH_GPIO2_G 0x00000180
+-#define SICRH_GPIO2_H 0x00000060
+-#define SICRH_TSOBI1  0x00000002
+-#define SICRH_TSOBI2  0x00000001
+-#define SICRH_RES     ~(  SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
+-			| SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \
+-			| SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \
+-			| SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \
+-			| SICRH_TSEC2_F | SICRH_TSEC2_G | SICRH_TSEC2_H \
+-			| SICRH_GPIO2_A | SICRH_GPIO2_B | SICRH_GPIO2_C \
+-			| SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \
+-			| SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \
+-			| SICRH_TSOBI2)
+-#elif defined (CONFIG_MPC8360)
+-#define SICRH_SECONDARY_DDR 0x40000000
+-#define SICRH_SDDROE   0x02000000	/* SDDRIOE bit from reset configuration word high. */
+-#define SICRH_UC1EOBI  0x00000004	/* UCC1 Ethernet Output Buffer Impedance. */
+-#define SICRH_UC2E1OBI 0x00000002	/* UCC2 Ethernet pin option 1 Output Buffer Impedance. */
+-#define SICRH_UC2E2OBI 0x00000001	/* UCC2 Ethernet pin option 2 Output Buffer Impedance. */
+-#define SICRH_RES     ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \
+-			SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI)
+-#endif
++	u32 sicrl;		/* System I/O Configuration Register Low */
++	u32 sicrh;		/* System I/O Configuration Register High */
+ 	u8 res6[0xE4];
+ } sysconf83xx_t;
+ 
+@@ -196,11 +70,8 @@ typedef struct wdt83xx {
+ 	u8 res0[4];
+ 	u32 swcrr;		/* System watchdog control register */
+ 	u32 swcnr;		/* System watchdog count register */
+-#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+-#define SWCNR_RES  ~(SWCNR_SWCN)
+ 	u8 res1[2];
+ 	u16 swsrr;		/* System watchdog service register */
+-#define SWSRR_WS 0x0000FFFF	/* Software Watchdog Service Field. */
+ 	u8 res2[0xF0];
+ } wdt83xx_t;
+ 
+@@ -209,91 +80,46 @@ typedef struct wdt83xx {
+  */
+ typedef struct rtclk83xx {
+ 	u32 cnr;		/* control register */
+-#define CNR_CLEN 0x00000080	/* Clock Enable Control Bit  */
+-#define CNR_CLIN 0x00000040	/* Input Clock Control Bit  */
+-#define CNR_AIM	 0x00000002	/* Alarm Interrupt Mask Bit  */
+-#define CNR_SIM	 0x00000001	/* Second Interrupt Mask Bit  */
+-#define CNR_RES	 ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
+ 	u32 ldr;		/* load register */
+-#define LDR_CLDV 0xFFFFFFFF	/* Contains the 32-bit value to be
+-				 * loaded in a 32-bit RTC counter.*/
+ 	u32 psr;		/* prescale register */
+-#define PSR_PRSC 0xFFFFFFFF	/*  RTC Prescaler bits. */
+-	u32 ctr;		/* Counter value field register */
+-#define CRT_CNTV 0xFFFFFFFF	/* RTC Counter value field. */
++	u32 ctr;		/* counter value field register */
+ 	u32 evr;		/* event register */
+-#define RTEVR_SIF  0x00000001	/* Second Interrupt Flag Bit  */
+-#define RTEVR_AIF  0x00000002	/* Alarm Interrupt Flag Bit  */
+-#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF)
+-#define PTEVR_PIF  0x00000001	/* Periodic interrupt flag bit. */
+-#define PTEVR_RES ~(PTEVR_PIF)
+ 	u32 alr;		/* alarm register */
+ 	u8 res0[0xE8];
+ } rtclk83xx_t;
+ 
+ /*
+- * Global timper module
++ * Global timer module
+  */
+-
+ typedef struct gtm83xx {
+-	u8 cfr1;		/* Timer1/2 Configuration  */
+-#define CFR1_PCAS 0x80		/* Pair Cascade mode  */
+-#define CFR1_BCM  0x40		/* Backward compatible mode  */
+-#define CFR1_STP2 0x20		/* Stop timer  */
+-#define CFR1_RST2 0x10		/* Reset timer	*/
+-#define CFR1_GM2  0x08		/* Gate mode for pin 2	*/
+-#define CFR1_GM1  0x04		/* Gate mode for pin 1	*/
+-#define CFR1_STP1 0x02		/* Stop timer  */
+-#define CFR1_RST1 0x01		/* Reset timer	*/
+-#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\
+-		 CFR1_GM1 | CFR1_STP1 | CFR1_RST1)
++	u8 cfr1;		/* Timer1/2 Configuration */
+ 	u8 res0[3];
+-	u8 cfr2;		/* Timer3/4 Configuration  */
+-#define CFR2_PCAS 0x80		/* Pair Cascade mode  */
+-#define CFR2_SCAS 0x40		/* Super Cascade mode  */
+-#define CFR2_STP4 0x20		/* Stop timer  */
+-#define CFR2_RST4 0x10		/* Reset timer	*/
+-#define CFR2_GM4  0x08		/* Gate mode for pin 4	*/
+-#define CFR2_GM3  0x04		/* Gate mode for pin 3	*/
+-#define CFR2_STP3 0x02		/* Stop timer  */
+-#define CFR2_RST3 0x01		/* Reset timer	*/
++	u8 cfr2;		/* Timer3/4 Configuration */
+ 	u8 res1[10];
+-	u16 mdr1;		/* Timer1 Mode Register	 */
+-#define MDR_SPS	 0xff00		/* Secondary Prescaler value  */
+-#define MDR_CE	 0x00c0		/* Capture edge and enable interrupt  */
+-#define MDR_OM	 0x0020		/* Output mode	*/
+-#define MDR_ORI	 0x0010		/* Output reference interrupt enable  */
+-#define MDR_FRR	 0x0008		/* Free run/restart  */
+-#define MDR_ICLK 0x0006		/* Input clock source for the timer  */
+-#define MDR_GE	 0x0001		/* Gate enable	*/
+-	u16 mdr2;		/* Timer2 Mode Register	 */
+-	u16 rfr1;		/* Timer1 Reference Register  */
+-	u16 rfr2;		/* Timer2 Reference Register  */
+-	u16 cpr1;		/* Timer1 Capture Register  */
+-	u16 cpr2;		/* Timer2 Capture Register  */
+-	u16 cnr1;		/* Timer1 Counter Register  */
+-	u16 cnr2;		/* Timer2 Counter Register  */
+-	u16 mdr3;		/* Timer3 Mode Register	 */
+-	u16 mdr4;		/* Timer4 Mode Register	 */
+-	u16 rfr3;		/* Timer3 Reference Register  */
+-	u16 rfr4;		/* Timer4 Reference Register  */
+-	u16 cpr3;		/* Timer3 Capture Register  */
+-	u16 cpr4;		/* Timer4 Capture Register  */
+-	u16 cnr3;		/* Timer3 Counter Register  */
+-	u16 cnr4;		/* Timer4 Counter Register  */
+-	u16 evr1;		/* Timer1 Event Register  */
+-	u16 evr2;		/* Timer2 Event Register  */
+-	u16 evr3;		/* Timer3 Event Register  */
+-	u16 evr4;		/* Timer4 Event Register  */
+-#define GTEVR_REF 0x0002	/* Output reference event  */
+-#define GTEVR_CAP 0x0001	/* Counter Capture event   */
+-#define GTEVR_RES ~(EVR_CAP|EVR_REF)
+-	u16 psr1;		/* Timer1 Prescaler Register  */
+-	u16 psr2;		/* Timer2 Prescaler Register  */
+-	u16 psr3;		/* Timer3 Prescaler Register  */
+-	u16 psr4;		/* Timer4 Prescaler Register  */
+-#define GTPSR_PPS  0x00FF	/* Primary Prescaler Bits. */
+-#define GTPSR_RES  ~(GTPSR_PPS)
++	u16 mdr1;		/* Timer1 Mode Register */
++	u16 mdr2;		/* Timer2 Mode Register */
++	u16 rfr1;		/* Timer1 Reference Register */
++	u16 rfr2;		/* Timer2 Reference Register */
++	u16 cpr1;		/* Timer1 Capture Register */
++	u16 cpr2;		/* Timer2 Capture Register */
++	u16 cnr1;		/* Timer1 Counter Register */
++	u16 cnr2;		/* Timer2 Counter Register */
++	u16 mdr3;		/* Timer3 Mode Register */
++	u16 mdr4;		/* Timer4 Mode Register */
++	u16 rfr3;		/* Timer3 Reference Register */
++	u16 rfr4;		/* Timer4 Reference Register */
++	u16 cpr3;		/* Timer3 Capture Register */
++	u16 cpr4;		/* Timer4 Capture Register */
++	u16 cnr3;		/* Timer3 Counter Register */
++	u16 cnr4;		/* Timer4 Counter Register */
++	u16 evr1;		/* Timer1 Event Register */
++	u16 evr2;		/* Timer2 Event Register */
++	u16 evr3;		/* Timer3 Event Register */
++	u16 evr4;		/* Timer4 Event Register */
++	u16 psr1;		/* Timer1 Prescaler Register */
++	u16 psr2;		/* Timer2 Prescaler Register */
++	u16 psr3;		/* Timer3 Prescaler Register */
++	u16 psr4;		/* Timer4 Prescaler Register */
+ 	u8 res[0xC0];
+ } gtm83xx_t;
+ 
+@@ -301,188 +127,31 @@ typedef struct gtm83xx {
+  * Integrated Programmable Interrupt Controller
+  */
+ typedef struct ipic83xx {
+-	u32 sicfr;		/*  System Global Interrupt Configuration Register (SICFR)  */
+-#define SICFR_HPI  0x7f000000	/*  Highest Priority Interrupt	*/
+-#define SICFR_MPSB 0x00400000	/*  Mixed interrupts Priority Scheme for group B  */
+-#define SICFR_MPSA 0x00200000	/*  Mixed interrupts Priority Scheme for group A  */
+-#define SICFR_IPSD 0x00080000	/*  Internal interrupts Priority Scheme for group D  */
+-#define SICFR_IPSA 0x00010000	/*  Internal interrupts Priority Scheme for group A  */
+-#define SICFR_HPIT 0x00000300	/*  HPI priority position IPIC output interrupt Type  */
+-#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
+-	u32 sivcr;		/*  System Global Interrupt Vector Register (SIVCR)  */
+-#define SICVR_IVECX 0xfc000000	/*  Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation)  */
+-#define SICVR_IVEC  0x0000007f	/*  Interrupt vector  */
+-#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
+-	u32 sipnr_h;		/*  System Internal Interrupt Pending Register - High (SIPNR_H)	 */
+-#if defined (CONFIG_MPC8349)
+-#define SIIH_TSEC1TX 0x80000000 /*  TSEC1 Tx interrupt	*/
+-#define SIIH_TSEC1RX 0x40000000 /*  TSEC1 Rx interrupt	*/
+-#define SIIH_TSEC1ER 0x20000000 /*  TSEC1 Eror interrupt  */
+-#define SIIH_TSEC2TX 0x10000000 /*  TSEC2 Tx interrupt	*/
+-#define SIIH_TSEC2RX 0x08000000 /*  TSEC2 Rx interrupt	*/
+-#define SIIH_TSEC2ER 0x04000000 /*  TSEC2 Eror interrupt  */
+-#define SIIH_USB2DR  0x02000000 /*  USB2 DR interrupt  */
+-#define SIIH_USB2MPH 0x01000000 /*  USB2 MPH interrupt	*/
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define SIIH_H_QE_H   0x80000000	/*  QE high interrupt */
+-#define SIIH_H_QE_L   0x40000000	/*  QE low interrupt */
+-#endif
+-#define SIIH_UART1   0x00000080 /*  UART1 interrupt  */
+-#define SIIH_UART2   0x00000040 /*  UART2 interrupt  */
+-#define SIIH_SEC     0x00000020 /*  SEC interrupt  */
+-#define SIIH_I2C1    0x00000004 /*  I2C1 interrupt  */
+-#define SIIH_I2C2    0x00000002 /*  I2C2 interrupt  */
+-#if defined (CONFIG_MPC8349)
+-#define SIIH_SPI     0x00000001 /*  SPI interrupt  */
+-#define SIIH_RES	~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \
+-			| SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \
+-			| SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \
+-			| SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \
+-			| SIIH_I2C2 | SIIH_SPI)
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define SIIH_RES       ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \
+-			SIIH_H_UART2| SIIH_H_SEC  | SIIH_H_I2C1 |SIIH_H_I2C2)
+-#endif
+-	u32 sipnr_l;		/*  System Internal Interrupt Pending Register - Low (SIPNR_L)	*/
+-#define SIIL_RTCS  0x80000000	/*  RTC SECOND interrupt  */
+-#define SIIL_PIT   0x40000000	/*  PIT interrupt  */
+-#define SIIL_PCI1  0x20000000	/*  PCI1 interrupt  */
+-#if defined (CONFIG_MPC8349)
+-#define SIIL_PCI2  0x10000000	/*  PCI2 interrupt  */
+-#endif
+-#define SIIL_RTCA  0x08000000	/*  RTC ALARM interrupt	 */
+-#define SIIL_MU	   0x04000000	/*  Message Unit interrupt  */
+-#define SIIL_SBA   0x02000000	/*  System Bus Arbiter interrupt  */
+-#define SIIL_DMA   0x01000000	/*  DMA interrupt  */
+-#define SIIL_GTM4  0x00800000	/*  GTM4 interrupt  */
+-#define SIIL_GTM8  0x00400000	/*  GTM8 interrupt  */
+-#if defined (CONFIG_MPC8349)
+-#define SIIL_GPIO1 0x00200000	/*  GPIO1 interrupt  */
+-#define SIIL_GPIO2 0x00100000	/*  GPIO2 interrupt  */
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define SIIL_QEP   0x00200000	/*  QE ports interrupt	*/
+-#define SIIL_SDDR  0x00100000	/*  SDDR interrupt  */
+-#endif
+-#define SIIL_DDR   0x00080000	/*  DDR interrupt  */
+-#define SIIL_LBC   0x00040000	/*  LBC interrupt  */
+-#define SIIL_GTM2  0x00020000	/*  GTM2 interrupt  */
+-#define SIIL_GTM6  0x00010000	/*  GTM6 interrupt  */
+-#define SIIL_PMC   0x00008000	/*  PMC interrupt  */
+-#define SIIL_GTM3  0x00000800	/*  GTM3 interrupt  */
+-#define SIIL_GTM7  0x00000400	/*  GTM7 interrupt  */
+-#define SIIL_GTM1  0x00000020	/*  GTM1 interrupt  */
+-#define SIIL_GTM5  0x00000010	/*  GTM5 interrupt  */
+-#define SIIL_DPTC  0x00000001	/*  DPTC interrupt (!!! Invisible for user !!!)	 */
+-#if defined (CONFIG_MPC8349)
+-#define SIIL_RES	~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \
+-			| SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \
+-			| SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \
+-			| SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \
+-			| SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \
+-			| SIIL_GTM5 |SIIL_DPTC )
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define SIIL_RES	~(SIIL_RTCS  |SIIL_PIT	|SIIL_PCI1 |SIIL_RTCALR \
+-			|SIIL_MU |SIIL_SBA  |SIIL_DMA  |SIIL_GTM4 |SIIL_GTM8 \
+-			|SIIL_QEP | SIIL_SDDR| SIIL_DDR	 |SIIL_LBC  |SIIL_GTM2 \
+-			|SIIL_GTM6 |SIIL_PMC  |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \
+-			|SIIL_GTM5 )
+-#endif
+-	u32 siprr_a;		/*  System Internal Interrupt Group A Priority Register (PRR)  */
++	u32 sicfr;		/* System Global Interrupt Configuration Register */
++	u32 sivcr;		/* System Global Interrupt Vector Register */
++	u32 sipnr_h;		/* System Internal Interrupt Pending Register - High */
++	u32 sipnr_l;		/* System Internal Interrupt Pending Register - Low */
++	u32 siprr_a;		/* System Internal Interrupt Group A Priority Register */
+ 	u8 res0[8];
+-	u32 siprr_d;		/*  System Internal Interrupt Group D Priority Register (PRR)  */
+-	u32 simsr_h;		/*  System Internal Interrupt Mask Register - High (SIIH)  */
+-	u32 simsr_l;		/*  System Internal Interrupt Mask Register - Low (SIIL)  */
++	u32 siprr_d;		/* System Internal Interrupt Group D Priority Register */
++	u32 simsr_h;		/* System Internal Interrupt Mask Register - High */
++	u32 simsr_l;		/* System Internal Interrupt Mask Register - Low */
+ 	u8 res1[4];
+-	u32 sepnr;		/*  System External Interrupt Pending Register (SEI)  */
+-	u32 smprr_a;		/*  System Mixed Interrupt Group A Priority Register (PRR)  */
+-	u32 smprr_b;		/*  System Mixed Interrupt Group B Priority Register (PRR)  */
+-#define PRR_0 0xe0000000	/* Priority Register, Position 0 programming */
+-#define PRR_1 0x1c000000	/* Priority Register, Position 1 programming */
+-#define PRR_2 0x03800000	/* Priority Register, Position 2 programming */
+-#define PRR_3 0x00700000	/* Priority Register, Position 3 programming */
+-#define PRR_4 0x0000e000	/* Priority Register, Position 4 programming */
+-#define PRR_5 0x00001c00	/* Priority Register, Position 5 programming */
+-#define PRR_6 0x00000380	/* Priority Register, Position 6 programming */
+-#define PRR_7 0x00000070	/* Priority Register, Position 7 programming */
+-#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
+-	u32 semsr;		/*  System External Interrupt Mask Register (SEI)  */
+-#define SEI_IRQ0  0x80000000	/*  IRQ0 external interrupt  */
+-#define SEI_IRQ1  0x40000000	/*  IRQ1 external interrupt  */
+-#define SEI_IRQ2  0x20000000	/*  IRQ2 external interrupt  */
+-#define SEI_IRQ3  0x10000000	/*  IRQ3 external interrupt  */
+-#define SEI_IRQ4  0x08000000	/*  IRQ4 external interrupt  */
+-#define SEI_IRQ5  0x04000000	/*  IRQ5 external interrupt  */
+-#define SEI_IRQ6  0x02000000	/*  IRQ6 external interrupt  */
+-#define SEI_IRQ7  0x01000000	/*  IRQ7 external interrupt  */
+-#define SEI_SIRQ0 0x00008000	/*  SIRQ0 external interrupt  */
+-#define SEI_RES		~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \
+-			| SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \
+-			| SEI_SIRQ0)
+-	u32 secnr;		/*  System External Interrupt Control Register (SECNR) */
+-#define SECNR_MIXB0T 0xc0000000 /*  MIXB0 priority position IPIC output interrupt type	*/
+-#define SECNR_MIXB1T 0x30000000 /*  MIXB1 priority position IPIC output interrupt type	*/
+-#define SECNR_MIXA0T 0x00c00000 /*  MIXA0 priority position IPIC output interrupt type	*/
+-#define SECNR_SYSA1T 0x00300000 /*  MIXA1 priority position IPIC output interrupt type	*/
+-#define SECNR_EDI0   0x00008000 /*  IRQ0 external interrupt edge/level detect  */
+-#define SECNR_EDI1   0x00004000 /*  IRQ1 external interrupt edge/level detect  */
+-#define SECNR_EDI2   0x00002000 /*  IRQ2 external interrupt edge/level detect  */
+-#define SECNR_EDI3   0x00001000 /*  IRQ3 external interrupt edge/level detect  */
+-#define SECNR_EDI4   0x00000800 /*  IRQ4 external interrupt edge/level detect  */
+-#define SECNR_EDI5   0x00000400 /*  IRQ5 external interrupt edge/level detect  */
+-#define SECNR_EDI6   0x00000200 /*  IRQ6 external interrupt edge/level detect  */
+-#define SECNR_EDI7   0x00000100 /*  IRQ7 external interrupt edge/level detect  */
+-#define SECNR_RES	~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \
+-			| SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \
+-			| SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \
+-			| SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7)
+-	u32 sersr;		/*  System Error Status Register (SERR)	 */
+-	u32 sermr;		/*  System Error Mask Register (SERR)  */
+-#define SERR_IRQ0 0x80000000	/*  IRQ0 MCP request  */
+-#define SERR_WDT  0x40000000	/*  WDT MCP request  */
+-#define SERR_SBA  0x20000000	/*  SBA MCP request  */
+-#if defined (CONFIG_MPC8349)
+-#define SERR_DDR  0x10000000	/*  DDR MCP request  */
+-#define SERR_LBC  0x08000000	/*  LBC MCP request  */
+-#define SERR_PCI1 0x04000000	/*  PCI1 MCP request  */
+-#define SERR_PCI2 0x02000000	/*  PCI2 MCP request  */
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define SERR_CIEE 0x10000000	/*  CIEE MCP request  */
+-#define SERR_CMEE 0x08000000	/*  CMEEMCP request  */
+-#define SERR_PCI  0x04000000	/*  PCI MCP request  */
+-#endif
+-#define SERR_MU	  0x01000000	/*  MU MCP request  */
+-#define SERR_RNC  0x00010000	/*  MU MCP request (!!! Non-visible for users !!!)  */
+-#if defined (CONFIG_MPC8349)
+-#define SERR_RES	~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \
+-			|SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \
+-			|SERR_RNC )
+-#elif defined (CONFIG_MPC8360)
+-#define SERR_RES	~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\
+-			|SERR_CMEE|SERR_PCI|SERR_MU)
+-#endif
+-	u32 sercr;		/*  System Error Control Register  (SERCR)  */
+-#define SERCR_MCPR 0x00000001	/*  MCP Route  */
+-#define SERCR_RES ~(SERCR_MCPR)
++	u32 sepnr;		/* System External Interrupt Pending Register */
++	u32 smprr_a;		/* System Mixed Interrupt Group A Priority Register */
++	u32 smprr_b;		/* System Mixed Interrupt Group B Priority Register */
++	u32 semsr;		/* System External Interrupt Mask Register */
++	u32 secnr;		/* System External Interrupt Control Register */
++	u32 sersr;		/* System Error Status Register */
++	u32 sermr;		/* System Error Mask Register */
++	u32 sercr;		/* System Error Control Register */
+ 	u8 res2[4];
+-	u32 sifcr_h;		/*  System Internal Interrupt Force Register - High (SIIH)  */
+-	u32 sifcr_l;		/*  System Internal Interrupt Force Register - Low (SIIL)  */
+-	u32 sefcr;		/*  System External Interrupt Force Register (SEI)  */
+-	u32 serfr;		/*  System Error Force Register (SERR)	*/
++	u32 sifcr_h;		/* System Internal Interrupt Force Register - High */
++	u32 sifcr_l;		/* System Internal Interrupt Force Register - Low */
++	u32 sefcr;		/* System External Interrupt Force Register */
++	u32 serfr;		/* System Error Force Register */
+ 	u32 scvcr;		/* System Critical Interrupt Vector Register */
+-#define SCVCR_CVECX	0xFC000000	/* Backward (MPC8260) compatible
+-					   critical interrupt vector. */
+-#define SCVCR_CVEC	0x0000007F	/* Critical interrupt vector */
+-#define SCVCR_RES	~(SCVCR_CVECX|SCVCR_CVEC)
+ 	u32 smvcr;		/* System Management Interrupt Vector Register */
+-#define SMVCR_CVECX	0xFC000000	/* Backward (MPC8260) compatible
+-					   critical interrupt vector. */
+-#define SMVCR_CVEC	0x0000007F	/* Critical interrupt vector */
+-#define SMVCR_RES	~(SMVCR_CVECX|SMVCR_CVEC)
+ 	u8 res3[0x98];
+ } ipic83xx_t;
+ 
+@@ -491,43 +160,14 @@ typedef struct ipic83xx {
+  */
+ typedef struct arbiter83xx {
+ 	u32 acr;		/* Arbiter Configuration Register */
+-#define ACR_COREDIS    0x10000000	/* Core disable. */
+-#define ACR_COREDIS_SHIFT		(31-7)
+-#define ACR_PIPE_DEP   0x00070000	/* Pipeline depth (number of outstanding transactions). */
+-#define ACR_PIPE_DEP_SHIFT		(31-15)
+-#define ACR_PCI_RPTCNT 0x00007000	/* PCI repeat count. */
+-#define ACR_PCI_RPTCNT_SHIFT		(31-19)
+-#define ACR_RPTCNT     0x00000700	/* Repeat count. */
+-#define ACR_RPTCNT_SHIFT		(31-23)
+-#define ACR_APARK      0x00000030	/* Address parking. */
+-#define ACR_APARK_SHIFT			(31-27)
+-#define ACR_PARKM	   0x0000000F	/* Parking master. */
+-#define ACR_PARKM_SHIFT			(31-31)
+-#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
+ 	u32 atr;		/* Arbiter Timers Register */
+-#define ATR_DTO 0x00FF0000	/* Data time out. */
+-#define ATR_ATO 0x000000FF	/* Address time out. */
+-#define ATR_RES ~(ATR_DTO|ATR_ATO)
+ 	u8 res[4];
+-	u32 aer;		/* Arbiter Event Register (AE) */
+-	u32 aidr;		/* Arbiter Interrupt Definition Register (AE) */
+-	u32 amr;		/* Arbiter Mask Register (AE) */
++	u32 aer;		/* Arbiter Event Register */
++	u32 aidr;		/* Arbiter Interrupt Definition Register */
++	u32 amr;		/* Arbiter Mask Register */
+ 	u32 aeatr;		/* Arbiter Event Attributes Register */
+-#define AEATR_EVENT   0x07000000	/* Event type. */
+-#define AEATR_MSTR_ID 0x001F0000	/* Master Id. */
+-#define AEATR_TBST    0x00000800	/* Transfer burst. */
+-#define AEATR_TSIZE   0x00000700	/* Transfer Size. */
+-#define AEATR_TTYPE	  0x0000001F	/* Transfer Type. */
+-#define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE)
+ 	u32 aeadr;		/* Arbiter Event Address Register */
+-	u32 aerr;		/* Arbiter Event Response Register (AE) */
+-#define AE_ETEA 0x00000020	/* Transfer error. */
+-#define AE_RES_ 0x00000010	/* Reserved transfer type. */
+-#define AE_ECW	0x00000008	/* External control word transfer type. */
+-#define AE_AO	0x00000004	/* Address Only transfer type. */
+-#define AE_DTO	0x00000002	/* Data time out. */
+-#define AE_ATO	0x00000001	/* Address time out. */
+-#define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO)
++	u32 aerr;		/* Arbiter Event Response Register */
+ 	u8 res1[0xDC];
+ } arbiter83xx_t;
+ 
+@@ -535,184 +175,24 @@ typedef struct arbiter83xx {
+  * Reset Module
+  */
+ typedef struct reset83xx {
+-	u32 rcwl;		/* RCWL Register  */
+-#define RCWL_LBIUCM  0x80000000 /* LBIUCM  */
+-#define RCWL_LBIUCM_SHIFT    31
+-#define RCWL_DDRCM   0x40000000 /* DDRCM  */
+-#define RCWL_DDRCM_SHIFT     30
+-#if defined (CONFIG_MPC8349)
+-#define RCWL_SVCOD   0x30000000 /* SVCOD  */
+-#endif
+-#define RCWL_SPMF    0x0f000000 /* SPMF	 */
+-#define RCWL_SPMF_SHIFT	     24
+-#define RCWL_COREPLL 0x007F0000 /* COREPLL  */
+-#define RCWL_COREPLL_SHIFT   16
+-#define RCWL_CEVCOD  0x000000C0 /* CEVCOD  */
+-#define RCWL_CEPDF   0x00000020 /* CEPDF  */
+-#define RCWL_CEPDF_SHIFT      5
+-#define RCWL_CEPMF   0x0000001F /* CEPMF  */
+-#define RCWL_CEPMF_SHIFT      0
+-#if defined (CONFIG_MPC8349)
+-#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+-#elif defined (CONFIG_MPC8360)
+-#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF)
+-#endif
+-	u32 rcwh;		/* RCHL Register  */
+-#define RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+-#define RCWH_PCIHOST_SHIFT   31
+-#if defined (CONFIG_MPC8349)
+-#define RCWH_PCI64   0x40000000 /* PCI64  */
+-#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB  */
+-#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB  */
+-#elif defined (CONFIG_MPC8360)
+-#define RCWH_PCIARB   0x20000000	/* PCI internal arbiter mode. */
+-#define RCWH_PCICKDRV 0x10000000	/* PCI clock output drive. */
+-#endif
+-#define RCWH_COREDIS 0x08000000 /* COREDIS  */
+-#define RCWH_BMS     0x04000000 /* BMS	*/
+-#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ  */
+-#define RCWH_SWEN    0x00800000 /* SWEN	 */
+-#define RCWH_ROMLOC  0x00700000 /* ROMLOC  */
+-#if defined (CONFIG_MPC8349)
+-#define RCWH_TSEC1M  0x0000c000 /* TSEC1M  */
+-#define RCWH_TSEC2M  0x00003000 /* TSEC2M  */
+-#define RCWH_TPR     0x00000100 /* TPR	*/
+-#elif defined (CONFIG_MPC8360)
+-#define RCWH_SDDRIOE  0x00000010	/* Secondary DDR IO Enable.  */
+-#endif
+-#define RCWH_TLE     0x00000008 /* TLE	*/
+-#define RCWH_LALE    0x00000004 /* LALE	 */
+-#if defined (CONFIG_MPC8349)
+-#define RCWH_RES	~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \
+-			| RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \
+-			| RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \
+-			| RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \
+-			| RCWH_TLE | RCWH_LALE)
+-#elif defined (CONFIG_MPC8360)
+-#define RCWH_RES	~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \
+-			|RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \
+-			|RCWH_SDDRIOE |RCWH_TLE)
+-#endif
++	u32 rcwl;		/* Reset Configuration Word Low Register */
++	u32 rcwh;		/* Reset Configuration Word High Register */
+ 	u8 res0[8];
+-	u32 rsr;		/* Reset status Register  */
+-#define RSR_RSTSRC 0xE0000000	/* Reset source	 */
+-#define RSR_RSTSRC_SHIFT   29
+-#define RSR_BSF	   0x00010000	/* Boot seq. fail  */
+-#define RSR_BSF_SHIFT	   16
+-#define RSR_SWSR   0x00002000	/* software soft reset	*/
+-#define RSR_SWSR_SHIFT	   13
+-#define RSR_SWHR   0x00001000	/* software hard reset	*/
+-#define RSR_SWHR_SHIFT	   12
+-#define RSR_JHRS   0x00000200	/* jtag hreset	*/
+-#define RSR_JHRS_SHIFT	    9
+-#define RSR_JSRS   0x00000100	/* jtag sreset status  */
+-#define RSR_JSRS_SHIFT	    8
+-#define RSR_CSHR   0x00000010	/* checkstop reset status  */
+-#define RSR_CSHR_SHIFT	    4
+-#define RSR_SWRS   0x00000008	/* software watchdog reset status  */
+-#define RSR_SWRS_SHIFT	    3
+-#define RSR_BMRS   0x00000004	/* bus monitop reset status  */
+-#define RSR_BMRS_SHIFT	    2
+-#define RSR_SRS	   0x00000002	/* soft reset status  */
+-#define RSR_SRS_SHIFT	    1
+-#define RSR_HRS	   0x00000001	/* hard reset status  */
+-#define RSR_HRS_SHIFT	    0
+-#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS)
+-	u32 rmr;		/* Reset mode Register	*/
+-#define RMR_CSRE   0x00000001	/* checkstop reset enable  */
+-#define RMR_CSRE_SHIFT	    0
+-#define RMR_RES ~(RMR_CSRE)
+-	u32 rpr;		/* Reset protection Register  */
+-	u32 rcr;		/* Reset Control Register  */
+-#define RCR_SWHR 0x00000002	/* software hard reset	*/
+-#define RCR_SWSR 0x00000001	/* software soft reset	*/
+-#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
+-	u32 rcer;		/* Reset Control Enable Register  */
+-#define RCER_CRE 0x00000001	/* software hard reset	*/
+-#define RCER_RES ~(RCER_CRE)
++	u32 rsr;		/* Reset Status Register */
++	u32 rmr;		/* Reset Mode Register */
++	u32 rpr;		/* Reset protection Register */
++	u32 rcr;		/* Reset Control Register */
++	u32 rcer;		/* Reset Control Enable Register */
+ 	u8 res1[0xDC];
+ } reset83xx_t;
+ 
++/*
++ * Clock Module
++ */
+ typedef struct clk83xx {
+-	u32 spmr;		/* system PLL mode Register  */
+-#define SPMR_LBIUCM  0x80000000 /* LBIUCM  */
+-#define SPMR_DDRCM   0x40000000 /* DDRCM  */
+-#if defined (CONFIG_MPC8349)
+-#define SPMR_SVCOD   0x30000000 /* SVCOD  */
+-#endif
+-#define SPMR_SPMF    0x0F000000 /* SPMF	 */
+-#define SPMR_CKID    0x00800000 /* CKID	 */
+-#define SPMR_CKID_SHIFT 23
+-#define SPMR_COREPLL 0x007F0000 /* COREPLL  */
+-#define SPMR_CEVCOD  0x000000C0 /* CEVCOD  */
+-#define SPMR_CEPDF   0x00000020 /* CEPDF  */
+-#define SPMR_CEPMF   0x0000001F /* CEPMF  */
+-#if defined (CONFIG_MPC8349)
+-#define SPMR_RES	~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \
+-			| SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \
+-			| SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF)
+-#elif defined (CONFIG_MPC8360)
+-#define SPMR_RES	~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \
+-			| SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \
+-			| SPMR_CEPDF | SPMR_CEPMF)
+-#endif
+-	u32 occr;		/* output clock control Register  */
+-#define OCCR_PCICOE0 0x80000000 /* PCICOE0  */
+-#define OCCR_PCICOE1 0x40000000 /* PCICOE1  */
+-#define OCCR_PCICOE2 0x20000000 /* PCICOE2  */
+-#if defined (CONFIG_MPC8349)
+-#define OCCR_PCICOE3 0x10000000 /* PCICOE3  */
+-#define OCCR_PCICOE4 0x08000000 /* PCICOE4  */
+-#define OCCR_PCICOE5 0x04000000 /* PCICOE5  */
+-#define OCCR_PCICOE6 0x02000000 /* PCICOE6  */
+-#define OCCR_PCICOE7 0x01000000 /* PCICOE7  */
+-#endif
+-#define OCCR_PCICD0  0x00800000 /* PCICD0  */
+-#define OCCR_PCICD1  0x00400000 /* PCICD1  */
+-#define OCCR_PCICD2  0x00200000 /* PCICD2  */
+-#if defined (CONFIG_MPC8349)
+-#define OCCR_PCICD3  0x00100000 /* PCICD3  */
+-#define OCCR_PCICD4  0x00080000 /* PCICD4  */
+-#define OCCR_PCICD5  0x00040000 /* PCICD5  */
+-#define OCCR_PCICD6  0x00020000 /* PCICD6  */
+-#define OCCR_PCICD7  0x00010000 /* PCICD7  */
+-#define OCCR_PCI1CR  0x00000002 /* PCI1CR  */
+-#define OCCR_PCI2CR  0x00000001 /* PCI2CR  */
+-#define OCCR_RES	~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \
+-			| OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \
+-			| OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \
+-			| OCCR_PCICD1 | OCCR_PCICD2  | OCCR_PCICD3 \
+-			| OCCR_PCICD4  | OCCR_PCICD5 | OCCR_PCICD6  \
+-			| OCCR_PCICD7  | OCCR_PCI1CR  | OCCR_PCI2CR )
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define OCCR_PCICR	0x00000002	/* PCI clock rate  */
+-#define OCCR_RES	~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \
+-			|OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR )
+-#endif
+-	u32 sccr;		/* system clock control Register  */
+-#if defined (CONFIG_MPC8349)
+-#define SCCR_TSEC1CM  0xc0000000	/* TSEC1CM  */
+-#define SCCR_TSEC1CM_SHIFT 30
+-#define SCCR_TSEC2CM  0x30000000	/* TSEC2CM  */
+-#define SCCR_TSEC2CM_SHIFT 28
+-#endif
+-#define SCCR_ENCCM    0x03000000	/* ENCCM  */
+-#define SCCR_ENCCM_SHIFT 24
+-#if defined (CONFIG_MPC8349)
+-#define SCCR_USBMPHCM 0x00c00000	/* USBMPHCM  */
+-#define SCCR_USBMPHCM_SHIFT 22
+-#define SCCR_USBDRCM  0x00300000	/* USBDRCM  */
+-#define SCCR_USBDRCM_SHIFT 20
+-#endif
+-#define SCCR_PCICM    0x00010000	/* PCICM  */
+-#if defined (CONFIG_MPC8349)
+-#define SCCR_RES	~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \
+-			| SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM)
+-#endif
+-#if defined (CONFIG_MPC8360)
+-#define SCCR_RES	~(SCCR_ENCCM | SCCR_PCICM)
+-#endif
++	u32 spmr;		/* system PLL mode Register */
++	u32 occr;		/* output clock control Register */
++	u32 sccr;		/* system clock control Register */
+ 	u8 res0[0xF4];
+ } clk83xx_t;
+ 
+@@ -720,27 +200,14 @@ typedef struct clk83xx {
+  * Power Management Control Module
+  */
+ typedef struct pmc83xx {
+-	u32 pmccr;		/* PMC Configuration Register  */
+-#define PMCCR_SLPEN 0x00000001	/* System Low Power Enable  */
+-#define PMCCR_DLPEN 0x00000002	/* DDR SDRAM Low Power Enable  */
+-#if defined (CONFIG_MPC8360)
+-#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable	 */
+-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN)
+-#elif defined (CONFIG_MPC8349)
+-#define PMCCR_RES    ~(PMCCR_SLPEN | PMCCR_DLPEN)
+-#endif
+-	u32 pmcer;		/* PMC Event Register  */
+-#define PMCER_PMCI  0x00000001	/* PMC Interrupt  */
+-#define PMCER_RES ~(PMCER_PMCI)
+-	u32 pmcmr;		/* PMC Mask Register  */
+-#define PMCMR_PMCIE 0x0001	/* PMC Interrupt Enable	 */
+-#define PMCMR_RES ~(PMCMR_PMCIE)
++	u32 pmccr;		/* PMC Configuration Register */
++	u32 pmcer;		/* PMC Event Register */
++	u32 pmcmr;		/* PMC Mask Register */
+ 	u8 res0[0xF4];
+ } pmc83xx_t;
+ 
+-#if defined (CONFIG_MPC8349)
+ /*
+- * general purpose I/O module
++ * General purpose I/O module
+  */
+ typedef struct gpio83xx {
+ 	u32 dir;		/* direction register */
+@@ -751,124 +218,20 @@ typedef struct gpio83xx {
+ 	u32 icr;		/* external interrupt control register */
+ 	u8 res0[0xE8];
+ } gpio83xx_t;
+-#endif
+ 
+-#if defined (CONFIG_MPC8360)
+ /*
+  * QE Ports Interrupts Registers
+  */
+ typedef struct qepi83xx {
+ 	u8 res0[0xC];
+ 	u32 qepier;		/* QE Ports Interrupt Event Register */
+-#define QEPIER_PA15 0x80000000
+-#define QEPIER_PA16 0x40000000
+-#define QEPIER_PA29 0x20000000
+-#define QEPIER_PA30 0x10000000
+-#define QEPIER_PB3  0x08000000
+-#define QEPIER_PB5  0x04000000
+-#define QEPIER_PB12 0x02000000
+-#define QEPIER_PB13 0x01000000
+-#define QEPIER_PB26 0x00800000
+-#define QEPIER_PB27 0x00400000
+-#define QEPIER_PC27 0x00200000
+-#define QEPIER_PC28 0x00100000
+-#define QEPIER_PC29 0x00080000
+-#define QEPIER_PD12 0x00040000
+-#define QEPIER_PD13 0x00020000
+-#define QEPIER_PD16 0x00010000
+-#define QEPIER_PD17 0x00008000
+-#define QEPIER_PD26 0x00004000
+-#define QEPIER_PD27 0x00002000
+-#define QEPIER_PE12 0x00001000
+-#define QEPIER_PE13 0x00000800
+-#define QEPIER_PE24 0x00000400
+-#define QEPIER_PE25 0x00000200
+-#define QEPIER_PE26 0x00000100
+-#define QEPIER_PE27 0x00000080
+-#define QEPIER_PE31 0x00000040
+-#define QEPIER_PF20 0x00000020
+-#define QEPIER_PG31 0x00000010
+-#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \
+-		   |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \
+-		   |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \
+-		   |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \
+-		   |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \
+-		   |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31)
+ 	u32 qepimr;		/* QE Ports Interrupt Mask Register */
+-#define QEPIMR_PA15 0x80000000
+-#define QEPIMR_PA16 0x40000000
+-#define QEPIMR_PA29 0x20000000
+-#define QEPIMR_PA30 0x10000000
+-#define QEPIMR_PB3  0x08000000
+-#define QEPIMR_PB5  0x04000000
+-#define QEPIMR_PB12 0x02000000
+-#define QEPIMR_PB13 0x01000000
+-#define QEPIMR_PB26 0x00800000
+-#define QEPIMR_PB27 0x00400000
+-#define QEPIMR_PC27 0x00200000
+-#define QEPIMR_PC28 0x00100000
+-#define QEPIMR_PC29 0x00080000
+-#define QEPIMR_PD12 0x00040000
+-#define QEPIMR_PD13 0x00020000
+-#define QEPIMR_PD16 0x00010000
+-#define QEPIMR_PD17 0x00008000
+-#define QEPIMR_PD26 0x00004000
+-#define QEPIMR_PD27 0x00002000
+-#define QEPIMR_PE12 0x00001000
+-#define QEPIMR_PE13 0x00000800
+-#define QEPIMR_PE24 0x00000400
+-#define QEPIMR_PE25 0x00000200
+-#define QEPIMR_PE26 0x00000100
+-#define QEPIMR_PE27 0x00000080
+-#define QEPIMR_PE31 0x00000040
+-#define QEPIMR_PF20 0x00000020
+-#define QEPIMR_PG31 0x00000010
+-#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \
+-		   |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \
+-		   |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \
+-		   |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \
+-		   |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \
+-		   |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31)
+ 	u32 qepicr;		/* QE Ports Interrupt Control Register */
+-#define QEPICR_PA15 0x80000000
+-#define QEPICR_PA16 0x40000000
+-#define QEPICR_PA29 0x20000000
+-#define QEPICR_PA30 0x10000000
+-#define QEPICR_PB3  0x08000000
+-#define QEPICR_PB5  0x04000000
+-#define QEPICR_PB12 0x02000000
+-#define QEPICR_PB13 0x01000000
+-#define QEPICR_PB26 0x00800000
+-#define QEPICR_PB27 0x00400000
+-#define QEPICR_PC27 0x00200000
+-#define QEPICR_PC28 0x00100000
+-#define QEPICR_PC29 0x00080000
+-#define QEPICR_PD12 0x00040000
+-#define QEPICR_PD13 0x00020000
+-#define QEPICR_PD16 0x00010000
+-#define QEPICR_PD17 0x00008000
+-#define QEPICR_PD26 0x00004000
+-#define QEPICR_PD27 0x00002000
+-#define QEPICR_PE12 0x00001000
+-#define QEPICR_PE13 0x00000800
+-#define QEPICR_PE24 0x00000400
+-#define QEPICR_PE25 0x00000200
+-#define QEPICR_PE26 0x00000100
+-#define QEPICR_PE27 0x00000080
+-#define QEPICR_PE31 0x00000040
+-#define QEPICR_PF20 0x00000020
+-#define QEPICR_PG31 0x00000010
+-#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \
+-		   |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \
+-		   |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \
+-		   |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \
+-		   |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \
+-		   |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31)
+ 	u8 res1[0xE8];
+ } qepi83xx_t;
+ 
+ /*
+- * general purpose I/O module
++ * QE Parallel I/O Ports
+  */
+ typedef struct gpio_n {
+ 	u32 podr;		/* Open Drain Register */
+@@ -879,238 +242,83 @@ typedef struct gpio_n {
+ 	u32 ppar2;		/* Pin Assignment Register 2 */
+ } gpio_n_t;
+ 
+-typedef struct gpio83xx {
++typedef struct qegpio83xx {
+ 	gpio_n_t ioport[0x7];
+ 	u8 res0[0x358];
+-} gpio83xx_t;
++} qepio83xx_t;
+ 
+ /*
+  * QE Secondary Bus Access Windows
+  */
+-
+ typedef struct qesba83xx {
+ 	u32 lbmcsar;		/* Local bus memory controller start address */
+-#define LBMCSAR_SA	0x000FFFFF	/* 20 most-significant bits of the start address */
+-#define LBMCSAR_RES	~(LBMCSAR_SA)
+ 	u32 sdmcsar;		/* Secondary DDR memory controller start address */
+-#define SDMCSAR_SA	0x000FFFFF	/* 20 most-significant bits of the start address */
+-#define SDMCSAR_RES	~(SDMCSAR_SA)
+ 	u8 res0[0x38];
+ 	u32 lbmcear;		/* Local bus memory controller end address */
+-#define LBMCEAR_EA	0x000FFFFF	/* 20 most-significant bits of the end address */
+-#define LBMCEAR_RES	~(LBMCEAR_EA)
+ 	u32 sdmcear;		/* Secondary DDR memory controller end address */
+-#define SDMCEAR_EA	0x000FFFFF	/* 20 most-significant bits of the end address */
+-#define SDMCEAR_RES	~(SDMCEAR_EA)
+ 	u8 res1[0x38];
+-	u32 lbmcar;		/* Local bus memory controller attributes  */
+-#define LBMCAR_WEN	0x00000001	/* Forward transactions to the QE local bus */
+-#define LBMCAR_RES	~(LBMCAR_WEN)
++	u32 lbmcar;		/* Local bus memory controller attributes */
+ 	u32 sdmcar;		/* Secondary DDR memory controller attributes */
+-#define SDMCAR_WEN	0x00000001	/* Forward transactions to the second DDR bus */
+-#define SDMCAR_RES	~(SDMCAR_WEN)
+-	u8 res2[0x778];
++	u8 res2[0x378];
+ } qesba83xx_t;
+-#endif
+ 
+ /*
+  * DDR Memory Controller Memory Map
+  */
+ typedef struct ddr_cs_bnds {
+ 	u32 csbnds;
+-#define CSBNDS_SA 0x00FF0000
+-#define CSBNDS_SA_SHIFT	   8
+-#define CSBNDS_EA 0x000000FF
+-#define CSBNDS_EA_SHIFT	  24
+ 	u8 res0[4];
+ } ddr_cs_bnds_t;
+ 
+ typedef struct ddr83xx {
+-	ddr_cs_bnds_t csbnds[4];	    /**< Chip Select x Memory Bounds */
++	ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */
+ 	u8 res0[0x60];
+-	u32 cs_config[4];	/**< Chip Select x Configuration */
+-#define CSCONFIG_EN	    0x80000000
+-#define CSCONFIG_AP	    0x00800000
+-#define CSCONFIG_ROW_BIT    0x00000700
+-#define CSCONFIG_ROW_BIT_12 0x00000000
+-#define CSCONFIG_ROW_BIT_13 0x00000100
+-#define CSCONFIG_ROW_BIT_14 0x00000200
+-#define CSCONFIG_COL_BIT    0x00000007
+-#define CSCONFIG_COL_BIT_8  0x00000000
+-#define CSCONFIG_COL_BIT_9  0x00000001
+-#define CSCONFIG_COL_BIT_10 0x00000002
+-#define CSCONFIG_COL_BIT_11 0x00000003
++	u32 cs_config[4];	/* Chip Select x Configuration */
+ 	u8 res1[0x78];
+-	u32 timing_cfg_1;	/**< SDRAM Timing Configuration 1 */
+-#define TIMING_CFG1_PRETOACT 0x70000000
+-#define TIMING_CFG1_PRETOACT_SHIFT   28
+-#define TIMING_CFG1_ACTTOPRE 0x0F000000
+-#define TIMING_CFG1_ACTTOPRE_SHIFT   24
+-#define TIMING_CFG1_ACTTORW  0x00700000
+-#define TIMING_CFG1_ACTTORW_SHIFT    20
+-#define TIMING_CFG1_CASLAT   0x00070000
+-#define TIMING_CFG1_CASLAT_SHIFT     16
+-#define TIMING_CFG1_REFREC   0x0000F000
+-#define TIMING_CFG1_REFREC_SHIFT     12
+-#define TIMING_CFG1_WRREC    0x00000700
+-#define TIMING_CFG1_WRREC_SHIFT	      8
+-#define TIMING_CFG1_ACTTOACT 0x00000070
+-#define TIMING_CFG1_ACTTOACT_SHIFT    4
+-#define TIMING_CFG1_WRTORD   0x00000007
+-#define TIMING_CFG1_WRTORD_SHIFT      0
+-#define TIMING_CFG1_CASLAT_20 0x00030000	/* CAS latency = 2.0 */
+-#define TIMING_CFG1_CASLAT_25 0x00040000	/* CAS latency = 2.5 */
+-
+-	u32 timing_cfg_2;	/**< SDRAM Timing Configuration 2 */
+-#define TIMING_CFG2_CPO		  0x0F000000
+-#define TIMING_CFG2_CPO_SHIFT		  24
+-#define TIMING_CFG2_ACSM	  0x00080000
+-#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
+-#define TIMING_CFG2_WR_DATA_DELAY_SHIFT	  10
+-#define TIMING_CFG2_CPO_DEF	  0x00000000	/* default (= CASLAT + 1) */
+-
+-	u32 sdram_cfg;		/**< SDRAM Control Configuration */
+-#define SDRAM_CFG_MEM_EN     0x80000000
+-#define SDRAM_CFG_SREN	     0x40000000
+-#define SDRAM_CFG_ECC_EN     0x20000000
+-#define SDRAM_CFG_RD_EN	     0x10000000
+-#define SDRAM_CFG_SDRAM_TYPE 0x03000000
+-#define SDRAM_CFG_SDRAM_TYPE_SHIFT   24
+-#define SDRAM_CFG_DYN_PWR    0x00200000
+-#define SDRAM_CFG_32_BE	     0x00080000
+-#define SDRAM_CFG_8_BE	     0x00040000
+-#define SDRAM_CFG_NCAP	     0x00020000
+-#define SDRAM_CFG_2T_EN	     0x00008000
+-#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
+-
++	u32 timing_cfg_1;	/* SDRAM Timing Configuration 1 */
++	u32 timing_cfg_2;	/* SDRAM Timing Configuration 2 */
++	u32 sdram_cfg;		/* SDRAM Control Configuration */
+ 	u8 res2[4];
+-	u32 sdram_mode;		/**< SDRAM Mode Configuration */
+-#define SDRAM_MODE_ESD 0xFFFF0000
+-#define SDRAM_MODE_ESD_SHIFT   16
+-#define SDRAM_MODE_SD  0x0000FFFF
+-#define SDRAM_MODE_SD_SHIFT	0
+-#define DDR_MODE_EXT_MODEREG	0x4000	/* select extended mode reg */
+-#define DDR_MODE_EXT_OPMODE	0x3FF8	/* operating mode, mask */
+-#define DDR_MODE_EXT_OP_NORMAL	0x0000	/* normal operation */
+-#define DDR_MODE_QFC		0x0004	/* QFC / compatibility, mask */
+-#define DDR_MODE_QFC_COMP	0x0000	/* compatible to older SDRAMs */
+-#define DDR_MODE_WEAK		0x0002	/* weak drivers */
+-#define DDR_MODE_DLL_DIS	0x0001	/* disable DLL */
+-#define DDR_MODE_CASLAT		0x0070	/* CAS latency, mask */
+-#define DDR_MODE_CASLAT_15	0x0010	/* CAS latency 1.5 */
+-#define DDR_MODE_CASLAT_20	0x0020	/* CAS latency 2 */
+-#define DDR_MODE_CASLAT_25	0x0060	/* CAS latency 2.5 */
+-#define DDR_MODE_CASLAT_30	0x0030	/* CAS latency 3 */
+-#define DDR_MODE_BTYPE_SEQ	0x0000	/* sequential burst */
+-#define DDR_MODE_BTYPE_ILVD	0x0008	/* interleaved burst */
+-#define DDR_MODE_BLEN_2		0x0001	/* burst length 2 */
+-#define DDR_MODE_BLEN_4		0x0002	/* burst length 4 */
+-#define DDR_REFINT_166MHZ_7US	1302	/* exact value for 7.8125 µs */
+-#define DDR_BSTOPRE	256	/* use 256 cycles as a starting point */
+-#define DDR_MODE_MODEREG	0x0000	/* select mode register */
+-
++	u32 sdram_mode;		/* SDRAM Mode Configuration */
+ 	u8 res3[8];
+-	u32 sdram_interval;	/**< SDRAM Interval Configuration */
+-#define SDRAM_INTERVAL_REFINT  0x3FFF0000
+-#define SDRAM_INTERVAL_REFINT_SHIFT    16
+-#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
+-#define SDRAM_INTERVAL_BSTOPRE_SHIFT	0
++	u32 sdram_interval;	/* SDRAM Interval Configuration */
+ 	u8 res9[8];
+ 	u32 sdram_clk_cntl;
+-#define DDR_SDRAM_CLK_CNTL_SS_EN		0x80000000
+-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025	0x01000000
+-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05	0x02000000
+-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075	0x03000000
+-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1		0x04000000
+-
+ 	u8 res4[0xCCC];
+-	u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
+-	u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
+-	u32 ecc_err_inject;	/**< Memory Data Path Error Injection Mask ECC */
+-#define ECC_ERR_INJECT_EMB			(0x80000000>>22)	/* ECC Mirror Byte */
+-#define ECC_ERR_INJECT_EIEN			(0x80000000>>23)	/* Error Injection Enable */
+-#define ECC_ERR_INJECT_EEIM			(0xff000000>>24)	/* ECC Erroe Injection Enable */
+-#define ECC_ERR_INJECT_EEIM_SHIFT		0
++	u32 data_err_inject_hi;	/* Memory Data Path Error Injection Mask High */
++	u32 data_err_inject_lo;	/* Memory Data Path Error Injection Mask Low */
++	u32 ecc_err_inject;	/* Memory Data Path Error Injection Mask ECC */
+ 	u8 res5[0x14];
+-	u32 capture_data_hi;	/**< Memory Data Path Read Capture High */
+-	u32 capture_data_lo;	/**< Memory Data Path Read Capture Low */
+-	u32 capture_ecc;	/**< Memory Data Path Read Capture ECC */
+-#define CAPTURE_ECC_ECE				(0xff000000>>24)
+-#define CAPTURE_ECC_ECE_SHIFT			0
++	u32 capture_data_hi;	/* Memory Data Path Read Capture High */
++	u32 capture_data_lo;	/* Memory Data Path Read Capture Low */
++	u32 capture_ecc;	/* Memory Data Path Read Capture ECC */
+ 	u8 res6[0x14];
+-	u32 err_detect;		/**< Memory Error Detect */
+-#define ECC_ERROR_DETECT_MME			(0x80000000>>0) /* Multiple Memory Errors */
+-#define ECC_ERROR_DETECT_MBE			(0x80000000>>28)	/* Multiple-Bit Error */
+-#define ECC_ERROR_DETECT_SBE			(0x80000000>>29)	/* Single-Bit ECC Error Pickup */
+-#define ECC_ERROR_DETECT_MSE			(0x80000000>>31)	/* Memory Select Error */
+-	u32 err_disable;	/**< Memory Error Disable */
+-#define ECC_ERROR_DISABLE_MBED			(0x80000000>>28)	/* Multiple-Bit ECC Error Disable */
+-#define ECC_ERROR_DISABLE_SBED			(0x80000000>>29)	/* Sinle-Bit ECC Error disable */
+-#define ECC_ERROR_DISABLE_MSED			(0x80000000>>31)	/* Memory Select Error Disable */
+-#define ECC_ERROR_ENABLE			~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED)
+-	u32 err_int_en;		/**< Memory Error Interrupt Enable */
+-#define ECC_ERR_INT_EN_MBEE			(0x80000000>>28)	/* Multiple-Bit ECC Error Interrupt Enable */
+-#define ECC_ERR_INT_EN_SBEE			(0x80000000>>29)	/* Single-Bit ECC Error Interrupt Enable */
+-#define ECC_ERR_INT_EN_MSEE			(0x80000000>>31)	/* Memory Select Error Interrupt Enable */
+-#define ECC_ERR_INT_DISABLE			~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE)
+-	u32 capture_attributes; /**< Memory Error Attributes Capture */
+-#define ECC_CAPT_ATTR_BNUM			(0xe0000000>>1) /* Data Beat Num */
+-#define ECC_CAPT_ATTR_BNUM_SHIFT		28
+-#define ECC_CAPT_ATTR_TSIZ			(0xc0000000>>6) /* Transaction Size */
+-#define ECC_CAPT_ATTR_TSIZ_FOUR_DW		0
+-#define ECC_CAPT_ATTR_TSIZ_ONE_DW		1
+-#define ECC_CAPT_ATTR_TSIZ_TWO_DW		2
+-#define ECC_CAPT_ATTR_TSIZ_THREE_DW		3
+-#define ECC_CAPT_ATTR_TSIZ_SHIFT		24
+-#define ECC_CAPT_ATTR_TSRC			(0xf8000000>>11)	/* Transaction Source */
+-#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT		0x0
+-#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF		0x2
+-#define ECC_CAPT_ATTR_TSRC_TSEC1		0x4
+-#define ECC_CAPT_ATTR_TSRC_TSEC2		0x5
+-#define ECC_CAPT_ATTR_TSRC_USB			(0x06|0x07)
+-#define ECC_CAPT_ATTR_TSRC_ENCRYPT		0x8
+-#define ECC_CAPT_ATTR_TSRC_I2C			0x9
+-#define ECC_CAPT_ATTR_TSRC_JTAG			0xA
+-#define ECC_CAPT_ATTR_TSRC_PCI1			0xD
+-#define ECC_CAPT_ATTR_TSRC_PCI2			0xE
+-#define ECC_CAPT_ATTR_TSRC_DMA			0xF
+-#define ECC_CAPT_ATTR_TSRC_SHIFT		16
+-#define ECC_CAPT_ATTR_TTYP			(0xe0000000>>18)	/* Transaction Type */
+-#define ECC_CAPT_ATTR_TTYP_WRITE		0x1
+-#define ECC_CAPT_ATTR_TTYP_READ			0x2
+-#define ECC_CAPT_ATTR_TTYP_R_M_W		0x3
+-#define ECC_CAPT_ATTR_TTYP_SHIFT		12
+-#define ECC_CAPT_ATTR_VLD			(0x80000000>>31)	/* Valid */
+-	u32 capture_address;	/**< Memory Error Address Capture */
+-	u32 capture_ext_address;/**< Memory Error Extended Address Capture */
+-	u32 err_sbe;		/**< Memory Single-Bit ECC Error Management */
+-#define ECC_ERROR_MAN_SBET			(0xff000000>>8) /* Single-Bit Error Threshold 0..255 */
+-#define ECC_ERROR_MAN_SBET_SHIFT		16
+-#define ECC_ERROR_MAN_SBEC			(0xff000000>>24)	/* Single Bit Error Counter 0..255 */
+-#define ECC_ERROR_MAN_SBEC_SHIFT		0
++	u32 err_detect;		/* Memory Error Detect */
++	u32 err_disable;	/* Memory Error Disable */
++	u32 err_int_en;		/* Memory Error Interrupt Enable */
++	u32 capture_attributes;	/* Memory Error Attributes Capture */
++	u32 capture_address;	/* Memory Error Address Capture */
++	u32 capture_ext_address;/* Memory Error Extended Address Capture */
++	u32 err_sbe;		/* Memory Single-Bit ECC Error Management */
+ 	u8 res7[0xA4];
+ 	u32 debug_reg;
+ 	u8 res8[0xFC];
+ } ddr83xx_t;
+ 
+ /*
+- * I2C1 Controller
+- */
+-
+-/*
+  * DUART
+  */
+ typedef struct duart83xx {
+-	u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
+-	u8 uier_udmb;	   /**< combined register for UIER and UDMB */
+-	u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
+-	u8 ulcr;	/**< line control register */
+-	u8 umcr;	/**< MODEM control register */
+-	u8 ulsr;	/**< line status register */
+-	u8 umsr;	/**< MODEM status register */
+-	u8 uscr;	/**< scratch register */
++	u8 urbr_ulcr_udlb;	/* combined register for URBR, UTHR and UDLB */
++	u8 uier_udmb;		/* combined register for UIER and UDMB */
++	u8 uiir_ufcr_uafr;	/* combined register for UIIR, UFCR and UAFR */
++	u8 ulcr;		/* line control register */
++	u8 umcr;		/* MODEM control register */
++	u8 ulsr;		/* line status register */
++	u8 umsr;		/* MODEM status register */
++	u8 uscr;		/* scratch register */
+ 	u8 res0[8];
+-	u8 udsr;	/**< DMA status register */
++	u8 udsr;		/* DMA status register */
+ 	u8 res1[3];
+ 	u8 res2[0xEC];
+ } duart83xx_t;
+@@ -1119,75 +327,52 @@ typedef struct duart83xx {
+  * Local Bus Controller Registers
+  */
+ typedef struct lbus_bank {
+-	u32 br;		    /**< Base Register	*/
+-	u32 or;		    /**< Base Register	*/
++	u32 br;			/* Base Register */
++	u32 or;			/* Option Register */
+ } lbus_bank_t;
+ 
+ typedef struct lbus83xx {
+ 	lbus_bank_t bank[8];
+ 	u8 res0[0x28];
+-	u32 mar;		/**< UPM Address Register */
++	u32 mar;		/* UPM Address Register */
+ 	u8 res1[0x4];
+-	u32 mamr;		/**< UPMA Mode Register */
+-	u32 mbmr;		/**< UPMB Mode Register */
+-	u32 mcmr;		/**< UPMC Mode Register */
++	u32 mamr;		/* UPMA Mode Register */
++	u32 mbmr;		/* UPMB Mode Register */
++	u32 mcmr;		/* UPMC Mode Register */
+ 	u8 res2[0x8];
+-	u32 mrtpr;		/**< Memory Refresh Timer Prescaler Register */
+-	u32 mdr;		/**< UPM Data Register */
++	u32 mrtpr;		/* Memory Refresh Timer Prescaler Register */
++	u32 mdr;		/* UPM Data Register */
+ 	u8 res3[0x8];
+-	u32 lsdmr;		/**< SDRAM Mode Register */
++	u32 lsdmr;		/* SDRAM Mode Register */
+ 	u8 res4[0x8];
+-	u32 lurt;		/**< UPM Refresh Timer */
+-	u32 lsrt;		/**< SDRAM Refresh Timer */
++	u32 lurt;		/* UPM Refresh Timer */
++	u32 lsrt;		/* SDRAM Refresh Timer */
+ 	u8 res5[0x8];
+-	u32 ltesr;		/**< Transfer Error Status Register */
+-	u32 ltedr;		/**< Transfer Error Disable Register */
+-	u32 lteir;		/**< Transfer Error Interrupt Register */
+-	u32 lteatr;		/**< Transfer Error Attributes Register */
+-	u32 ltear;		/**< Transfer Error Address Register */
++	u32 ltesr;		/* Transfer Error Status Register */
++	u32 ltedr;		/* Transfer Error Disable Register */
++	u32 lteir;		/* Transfer Error Interrupt Register */
++	u32 lteatr;		/* Transfer Error Attributes Register */
++	u32 ltear;		/* Transfer Error Address Register */
+ 	u8 res6[0xC];
+-	u32 lbcr;		/**< Configuration Register */
+-#define LBCR_LDIS  0x80000000
+-#define LBCR_LDIS_SHIFT	   31
+-#define LBCR_BCTLC 0x00C00000
+-#define LBCR_BCTLC_SHIFT   22
+-#define LBCR_LPBSE 0x00020000
+-#define LBCR_LPBSE_SHIFT   17
+-#define LBCR_EPAR  0x00010000
+-#define LBCR_EPAR_SHIFT	   16
+-#define LBCR_BMT   0x0000FF00
+-#define LBCR_BMT_SHIFT	    8
+-	u32 lcrr;		/**< Clock Ratio Register */
+-#define LCRR_DBYP    0x80000000
+-#define LCRR_DBYP_SHIFT	     31
+-#define LCRR_BUFCMDC 0x30000000
+-#define LCRR_BUFCMDC_SHIFT   28
+-#define LCRR_ECL     0x03000000
+-#define LCRR_ECL_SHIFT	     24
+-#define LCRR_EADC    0x00030000
+-#define LCRR_EADC_SHIFT	     16
+-#define LCRR_CLKDIV  0x0000000F
+-#define LCRR_CLKDIV_SHIFT     0
+-
++	u32 lbcr;		/* Configuration Register */
++	u32 lcrr;		/* Clock Ratio Register */
+ 	u8 res7[0x28];
+ 	u8 res8[0xF00];
+ } lbus83xx_t;
+ 
+-#if defined (CONFIG_MPC8349)
+ /*
+  * Serial Peripheral Interface
+  */
+ typedef struct spi83xx {
+-	u32 mode;     /**< mode register  */
+-	u32 event;    /**< event register */
+-	u32 mask;     /**< mask register  */
+-	u32 com;      /**< command register */
++	u32 mode;		/* mode register */
++	u32 event;		/* event register */
++	u32 mask;		/* mask register */
++	u32 com;		/* command register */
+ 	u8 res0[0x10];
+-	u32 tx;	      /**< transmit register */
+-	u32 rx;	      /**< receive register */
+-	u8 res1[0xD8];
++	u32 tx;			/* transmit register */
++	u32 rx;			/* receive register */
++	u8 res1[0xFD8];
+ } spi83xx_t;
+-#endif
+ 
+ /*
+  * DMA/Messaging Unit
+@@ -1197,21 +382,17 @@ typedef struct dma83xx {
+ 	u32 omisr;		/* 0x30 Outbound message interrupt status register */
+ 	u32 omimr;		/* 0x34 Outbound message interrupt mask register */
+ 	u32 res1[0x6];		/* 0x38-0x49 reserved */
+-
+ 	u32 imr0;		/* 0x50 Inbound message register 0 */
+ 	u32 imr1;		/* 0x54 Inbound message register 1 */
+ 	u32 omr0;		/* 0x58 Outbound message register 0 */
+ 	u32 omr1;		/* 0x5C Outbound message register 1 */
+-
+ 	u32 odr;		/* 0x60 Outbound doorbell register */
+ 	u32 res2;		/* 0x64-0x67 reserved */
+ 	u32 idr;		/* 0x68 Inbound doorbell register */
+ 	u32 res3[0x5];		/* 0x6C-0x79 reserved */
+-
+ 	u32 imisr;		/* 0x80 Inbound message interrupt status register */
+ 	u32 imimr;		/* 0x84 Inbound message interrupt mask register */
+ 	u32 res4[0x1E];		/* 0x88-0x99 reserved */
+-
+ 	u32 dmamr0;		/* 0x100 DMA 0 mode register */
+ 	u32 dmasr0;		/* 0x104 DMA 0 status register */
+ 	u32 dmacdar0;		/* 0x108 DMA 0 current descriptor address register */
+@@ -1223,7 +404,6 @@ typedef struct dma83xx {
+ 	u32 dmabcr0;		/* 0x120 DMA 0 byte count register */
+ 	u32 dmandar0;		/* 0x124 DMA 0 next descriptor address register */
+ 	u32 res8[0x16];		/* 0x128-0x179 reserved */
+-
+ 	u32 dmamr1;		/* 0x180 DMA 1 mode register */
+ 	u32 dmasr1;		/* 0x184 DMA 1 status register */
+ 	u32 dmacdar1;		/* 0x188 DMA 1 current descriptor address register */
+@@ -1235,7 +415,6 @@ typedef struct dma83xx {
+ 	u32 dmabcr1;		/* 0x1A0 DMA 1 byte count register */
+ 	u32 dmandar1;		/* 0x1A4 DMA 1 next descriptor address register */
+ 	u32 res12[0x16];	/* 0x1A8-0x199 reserved */
+-
+ 	u32 dmamr2;		/* 0x200 DMA 2 mode register */
+ 	u32 dmasr2;		/* 0x204 DMA 2 status register */
+ 	u32 dmacdar2;		/* 0x208 DMA 2 current descriptor address register */
+@@ -1247,7 +426,6 @@ typedef struct dma83xx {
+ 	u32 dmabcr2;		/* 0x220 DMA 2 byte count register */
+ 	u32 dmandar2;		/* 0x224 DMA 2 next descriptor address register */
+ 	u32 res16[0x16];	/* 0x228-0x279 reserved */
+-
+ 	u32 dmamr3;		/* 0x280 DMA 3 mode register */
+ 	u32 dmasr3;		/* 0x284 DMA 3 status register */
+ 	u32 dmacdar3;		/* 0x288 DMA 3 current descriptor address register */
+@@ -1258,39 +436,15 @@ typedef struct dma83xx {
+ 	u32 res19;		/* 0x29C reserved */
+ 	u32 dmabcr3;		/* 0x2A0 DMA 3 byte count register */
+ 	u32 dmandar3;		/* 0x2A4 DMA 3 next descriptor address register */
+-
+ 	u32 dmagsr;		/* 0x2A8 DMA general status register */
+ 	u32 res20[0x15];	/* 0x2AC-0x2FF reserved */
+ } dma83xx_t;
+ 
+-/* DMAMRn bits */
+-#define DMA_CHANNEL_START			(0x00000001)	/* Bit - DMAMRn CS */
+-#define DMA_CHANNEL_TRANSFER_MODE_DIRECT	(0x00000004)	/* Bit - DMAMRn CTM */
+-#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN	(0x00001000)	/* Bit - DMAMRn SAHE */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B	(0x00000000)	/* 2Bit- DMAMRn SAHTS 1byte */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B	(0x00004000)	/* 2Bit- DMAMRn SAHTS 2bytes */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B	(0x00008000)	/* 2Bit- DMAMRn SAHTS 4bytes */
+-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B	(0x0000c000)	/* 2Bit- DMAMRn SAHTS 8bytes */
+-#define DMA_CHANNEL_SNOOP			(0x00010000)	/* Bit - DMAMRn DMSEN */
+-
+-/* DMASRn bits */
+-#define DMA_CHANNEL_BUSY			(0x00000004)	/* Bit - DMASRn CB */
+-#define DMA_CHANNEL_TRANSFER_ERROR		(0x00000080)	/* Bit - DMASRn TE */
+-
+ /*
+  * PCI Software Configuration Registers
+  */
+ typedef struct pciconf83xx {
+ 	u32 config_address;
+-#define PCI_CONFIG_ADDRESS_EN	0x80000000
+-#define PCI_CONFIG_ADDRESS_BN_SHIFT	16
+-#define PCI_CONFIG_ADDRESS_BN_MASK	0x00ff0000
+-#define PCI_CONFIG_ADDRESS_DN_SHIFT	11
+-#define PCI_CONFIG_ADDRESS_DN_MASK	0x0000f800
+-#define PCI_CONFIG_ADDRESS_FN_SHIFT	8
+-#define PCI_CONFIG_ADDRESS_FN_MASK	0x00000700
+-#define PCI_CONFIG_ADDRESS_RN_SHIFT	0
+-#define PCI_CONFIG_ADDRESS_RN_MASK	0x000000fc
+ 	u32 config_data;
+ 	u32 int_ack;
+ 	u8 res[116];
+@@ -1313,34 +467,6 @@ typedef struct pci_outbound_window {
+  */
+ typedef struct ios83xx {
+ 	pot83xx_t pot[6];
+-#define POTAR_TA_MASK	0x000fffff
+-#define POBAR_BA_MASK	0x000fffff
+-#define POCMR_EN	0x80000000
+-#define POCMR_IO	0x40000000	/* 0--memory space 1--I/O space */
+-#define POCMR_SE	0x20000000	/* streaming enable */
+-#define POCMR_DST	0x10000000	/* 0--PCI1 1--PCI2 */
+-#define POCMR_CM_MASK	0x000fffff
+-#define POCMR_CM_4G	0x00000000
+-#define POCMR_CM_2G	0x00080000
+-#define POCMR_CM_1G	0x000C0000
+-#define POCMR_CM_512M	0x000E0000
+-#define POCMR_CM_256M	0x000F0000
+-#define POCMR_CM_128M	0x000F8000
+-#define POCMR_CM_64M	0x000FC000
+-#define POCMR_CM_32M	0x000FE000
+-#define POCMR_CM_16M	0x000FF000
+-#define POCMR_CM_8M	0x000FF800
+-#define POCMR_CM_4M	0x000FFC00
+-#define POCMR_CM_2M	0x000FFE00
+-#define POCMR_CM_1M	0x000FFF00
+-#define POCMR_CM_512K	0x000FFF80
+-#define POCMR_CM_256K	0x000FFFC0
+-#define POCMR_CM_128K	0x000FFFE0
+-#define POCMR_CM_64K	0x000FFFF0
+-#define POCMR_CM_32K	0x000FFFF8
+-#define POCMR_CM_16K	0x000FFFFC
+-#define POCMR_CM_8K	0x000FFFFE
+-#define POCMR_CM_4K	0x000FFFFF
+ 	u8 res0[0x60];
+ 	u32 pmcr;
+ 	u8 res1[4];
+@@ -1353,74 +479,13 @@ typedef struct ios83xx {
+  */
+ typedef struct pcictrl83xx {
+ 	u32 esr;
+-#define ESR_MERR	0x80000000
+-#define ESR_APAR	0x00000400
+-#define ESR_PCISERR	0x00000200
+-#define ESR_MPERR	0x00000100
+-#define ESR_TPERR	0x00000080
+-#define ESR_NORSP	0x00000040
+-#define ESR_TABT	0x00000020
+ 	u32 ecdr;
+-#define ECDR_APAR	0x00000400
+-#define ECDR_PCISERR	0x00000200
+-#define ECDR_MPERR	0x00000100
+-#define ECDR_TPERR	0x00000080
+-#define ECDR_NORSP	0x00000040
+-#define ECDR_TABT	0x00000020
+ 	u32 eer;
+-#define EER_APAR	0x00000400
+-#define EER_PCISERR	0x00000200
+-#define EER_MPERR	0x00000100
+-#define EER_TPERR	0x00000080
+-#define EER_NORSP	0x00000040
+-#define EER_TABT	0x00000020
+ 	u32 eatcr;
+-#define EATCR_ERRTYPR_MASK	0x70000000
+-#define EATCR_ERRTYPR_APR	0x00000000	/* address parity error */
+-#define EATCR_ERRTYPR_WDPR	0x10000000	/* write data parity error */
+-#define EATCR_ERRTYPR_RDPR	0x20000000	/* read data parity error */
+-#define EATCR_ERRTYPR_MA	0x30000000	/* master abort */
+-#define EATCR_ERRTYPR_TA	0x40000000	/* target abort */
+-#define EATCR_ERRTYPR_SE	0x50000000	/* system error indication received */
+-#define EATCR_ERRTYPR_PEA	0x60000000	/* parity error indication received on a read */
+-#define EATCR_ERRTYPR_PEW	0x70000000	/* parity error indication received on a write */
+-#define EATCR_BN_MASK		0x0f000000	/* beat number */
+-#define EATCR_BN_1st		0x00000000
+-#define EATCR_BN_2ed		0x01000000
+-#define EATCR_BN_3rd		0x02000000
+-#define EATCR_BN_4th		0x03000000
+-#define EATCR_BN_5th		0x0400000
+-#define EATCR_BN_6th		0x05000000
+-#define EATCR_BN_7th		0x06000000
+-#define EATCR_BN_8th		0x07000000
+-#define EATCR_BN_9th		0x08000000
+-#define EATCR_TS_MASK		0x00300000	/* transaction size */
+-#define EATCR_TS_4		0x00000000
+-#define EATCR_TS_1		0x00100000
+-#define EATCR_TS_2		0x00200000
+-#define EATCR_TS_3		0x00300000
+-#define EATCR_ES_MASK		0x000f0000	/* error source */
+-#define EATCR_ES_EM		0x00000000	/* external master */
+-#define EATCR_ES_DMA		0x00050000
+-#define EATCR_CMD_MASK		0x0000f000
+-#if defined (CONFIG_MPC8349)
+-#define EATCR_HBE_MASK		0x00000f00	/* PCI high byte enable */
+-#endif
+-#define EATCR_BE_MASK		0x000000f0	/* PCI byte enable */
+-#if defined (CONFIG_MPC8349)
+-#define EATCR_HPB		0x00000004	/* high parity bit */
+-#endif
+-#define EATCR_PB		0x00000002	/* parity bit */
+-#define EATCR_VI		0x00000001	/* error information valid */
+ 	u32 eacr;
+ 	u32 eeacr;
+-#if defined (CONFIG_MPC8349)
+ 	u32 edlcr;
+ 	u32 edhcr;
+-#elif defined (CONFIG_MPC8360)
+-	u32 edcr;		/* was edlcr */
+-	u8 res_edcr[0x4];
+-#endif
+ 	u32 gcr;
+ 	u32 ecr;
+ 	u32 gsr;
+@@ -1443,41 +508,8 @@ typedef struct pcictrl83xx {
+ 	u8 res6[4];
+ 	u32 piwar0;
+ 	u8 res7[132];
+-#define PITAR_TA_MASK		0x000fffff
+-#define PIBAR_MASK		0xffffffff
+-#define PIEBAR_EBA_MASK		0x000fffff
+-#define PIWAR_EN		0x80000000
+-#define PIWAR_PF		0x20000000
+-#define PIWAR_RTT_MASK		0x000f0000
+-#define PIWAR_RTT_NO_SNOOP	0x00040000
+-#define PIWAR_RTT_SNOOP		0x00050000
+-#define PIWAR_WTT_MASK		0x0000f000
+-#define PIWAR_WTT_NO_SNOOP	0x00004000
+-#define PIWAR_WTT_SNOOP		0x00005000
+-#define PIWAR_IWS_MASK	0x0000003F
+-#define PIWAR_IWS_4K	0x0000000B
+-#define PIWAR_IWS_8K	0x0000000C
+-#define PIWAR_IWS_16K	0x0000000D
+-#define PIWAR_IWS_32K	0x0000000E
+-#define PIWAR_IWS_64K	0x0000000F
+-#define PIWAR_IWS_128K	0x00000010
+-#define PIWAR_IWS_256K	0x00000011
+-#define PIWAR_IWS_512K	0x00000012
+-#define PIWAR_IWS_1M	0x00000013
+-#define PIWAR_IWS_2M	0x00000014
+-#define PIWAR_IWS_4M	0x00000015
+-#define PIWAR_IWS_8M	0x00000016
+-#define PIWAR_IWS_16M	0x00000017
+-#define PIWAR_IWS_32M	0x00000018
+-#define PIWAR_IWS_64M	0x00000019
+-#define PIWAR_IWS_128M	0x0000001A
+-#define PIWAR_IWS_256M	0x0000001B
+-#define PIWAR_IWS_512M	0x0000001C
+-#define PIWAR_IWS_1G	0x0000001D
+-#define PIWAR_IWS_2G	0x0000001E
+ } pcictrl83xx_t;
+ 
+-#if defined (CONFIG_MPC8349)
+ /*
+  * USB
+  */
+@@ -1491,7 +523,6 @@ typedef struct usb83xx {
+ typedef struct tsec83xx {
+ 	u8 fixme[0x1000];
+ } tsec83xx_t;
+-#endif
+ 
+ /*
+  * Security
+@@ -1500,581 +531,82 @@ typedef struct security83xx {
+ 	u8 fixme[0x10000];
+ } security83xx_t;
+ 
+-#if defined (CONFIG_MPC8360)
+-/*
+- * iram
+- */
+-typedef struct iram83xx {
+-	u32 iadd;		/* I-RAM address register */
+-	u32 idata;		/* I-RAM data register */
+-	u8 res0[0x78];
+-} iram83xx_t;
+-
+-/*
+- * Interrupt Controller
+- */
+-typedef struct irq83xx {
+-	u32 cicr;		/* QE system interrupt configuration */
+-	u32 civec;		/* QE system interrupt vector register */
+-	u32 cripnr;		/* QE RISC interrupt pending register */
+-	u32 cipnr;		/*  QE system interrupt pending register */
+-	u32 cipxcc;		/* QE interrupt priority register */
+-	u32 cipycc;		/* QE interrupt priority register */
+-	u32 cipwcc;		/* QE interrupt priority register */
+-	u32 cipzcc;		/* QE interrupt priority register */
+-	u32 cimr;		/* QE system interrupt mask register */
+-	u32 crimr;		/* QE RISC interrupt mask register */
+-	u32 cicnr;		/* QE system interrupt control register */
+-	u8 res0[0x4];
+-	u32 ciprta;		/* QE system interrupt priority register for RISC tasks A */
+-	u32 ciprtb;		/* QE system interrupt priority register for RISC tasks B */
+-	u8 res1[0x4];
+-	u32 cricr;		/* QE system RISC interrupt control */
+-	u8 res2[0x20];
+-	u32 chivec;		/* QE high system interrupt vector */
+-	u8 res3[0x1C];
+-} irq83xx_t;
+-
+-/*
+- * Communications Processor
+- */
+-typedef struct cp83xx {
+-	u32 cecr;		/* QE command register */
+-	u32 ceccr;		/* QE controller configuration register */
+-	u32 cecdr;		/* QE command data register */
+-	u8 res0[0xA];
+-	u16 ceter;		/* QE timer event register */
+-	u8 res1[0x2];
+-	u16 cetmr;		/* QE timers mask register */
+-	u32 cetscr;		/* QE time-stamp timer control register */
+-	u32 cetsr1;		/* QE time-stamp register 1 */
+-	u32 cetsr2;		/* QE time-stamp register 2 */
+-	u8 res2[0x8];
+-	u32 cevter;		/* QE virtual tasks event register */
+-	u32 cevtmr;		/* QE virtual tasks mask register */
+-	u16 cercr;		/* QE RAM control register */
+-	u8 res3[0x2];
+-	u8 res4[0x24];
+-	u16 ceexe1;		/* QE external request 1 event register */
+-	u8 res5[0x2];
+-	u16 ceexm1;		/* QE external request 1 mask register */
+-	u8 res6[0x2];
+-	u16 ceexe2;		/* QE external request 2 event register */
+-	u8 res7[0x2];
+-	u16 ceexm2;		/* QE external request 2 mask register */
+-	u8 res8[0x2];
+-	u16 ceexe3;		/* QE external request 3 event register */
+-	u8 res9[0x2];
+-	u16 ceexm3;		/* QE external request 3 mask register */
+-	u8 res10[0x2];
+-	u16 ceexe4;		/* QE external request 4 event register */
+-	u8 res11[0x2];
+-	u16 ceexm4;		/* QE external request 4 mask register */
+-	u8 res12[0x2];
+-	u8 res13[0x280];
+-} cp83xx_t;
+-
+-/*
+- * QE Multiplexer
+- */
+-
+-typedef struct qmx83xx {
+-	u32 cmxgcr;		/* CMX general clock route register */
+-	u32 cmxsi1cr_l;		/* CMX SI1 clock route low register */
+-	u32 cmxsi1cr_h;		/* CMX SI1 clock route high register */
+-	u32 cmxsi1syr;		/* CMX SI1 SYNC route register */
+-	u32 cmxucr1;		/* CMX UCC1, UCC3 clock route register */
+-	u32 cmxucr2;		/* CMX UCC5, UCC7 clock route register */
+-	u32 cmxucr3;		/* CMX UCC2, UCC4 clock route register */
+-	u32 cmxucr4;		/* CMX UCC6, UCC8 clock route register */
+-	u32 cmxupcr;		/* CMX UPC clock route register */
+-	u8 res0[0x1C];
+-} qmx83xx_t;
+-
+-/*
+-* QE Timers
+-*/
+-
+-typedef struct qet83xx {
+-	u8 gtcfr1;		/* Timer 1 and Timer 2 global configuration register */
+-	u8 res0[0x3];
+-	u8 gtcfr2;		/* Timer 3 and timer 4 global configuration register */
+-	u8 res1[0xB];
+-	u16 gtmdr1;		/* Timer 1 mode register */
+-	u16 gtmdr2;		/* Timer 2 mode register */
+-	u16 gtrfr1;		/* Timer 1 reference register */
+-	u16 gtrfr2;		/* Timer 2 reference register */
+-	u16 gtcpr1;		/* Timer 1 capture register */
+-	u16 gtcpr2;		/* Timer 2 capture register */
+-	u16 gtcnr1;		/* Timer 1 counter */
+-	u16 gtcnr2;		/* Timer 2 counter */
+-	u16 gtmdr3;		/* Timer 3 mode register */
+-	u16 gtmdr4;		/* Timer 4 mode register */
+-	u16 gtrfr3;		/* Timer 3 reference register */
+-	u16 gtrfr4;		/* Timer 4 reference register */
+-	u16 gtcpr3;		/* Timer 3 capture register */
+-	u16 gtcpr4;		/* Timer 4 capture register */
+-	u16 gtcnr3;		/* Timer 3 counter */
+-	u16 gtcnr4;		/* Timer 4 counter */
+-	u16 gtevr1;		/* Timer 1 event register */
+-	u16 gtevr2;		/* Timer 2 event register */
+-	u16 gtevr3;		/* Timer 3 event register */
+-	u16 gtevr4;		/* Timer 4 event register */
+-	u16 gtps;		/* Timer 1 prescale register */
+-	u8 res2[0x46];
+-} qet83xx_t;
+-
+-/*
+-* spi
+-*/
+-
+-typedef struct spi83xx {
+-	u8 res0[0x20];
+-	u32 spmode;		/* SPI mode register */
+-	u8 res1[0x2];
+-	u8 spie;		/* SPI event register */
+-	u8 res2[0x1];
+-	u8 res3[0x2];
+-	u8 spim;		/* SPI mask register */
+-	u8 res4[0x1];
+-	u8 res5[0x1];
+-	u8 spcom;		/* SPI command register	 */
+-	u8 res6[0x2];
+-	u32 spitd;		/* SPI transmit data register (cpu mode) */
+-	u32 spird;		/* SPI receive data register (cpu mode) */
+-	u8 res7[0x8];
+-} spi83xx_t;
+-
+-/*
+-* mcc
+-*/
+-
+-typedef struct mcc83xx {
+-	u32 mcce;		/* MCC event register */
+-	u32 mccm;		/* MCC mask register */
+-	u32 mccf;		/* MCC configuration register */
+-	u32 merl;		/* MCC emergency request level register */
+-	u8 res0[0xF0];
+-} mcc83xx_t;
+-
+-/*
+-* brg
+-*/
+-
+-typedef struct brg83xx {
+-	u32 brgc1;		/* BRG1 configuration register */
+-	u32 brgc2;		/* BRG2 configuration register */
+-	u32 brgc3;		/* BRG3 configuration register */
+-	u32 brgc4;		/* BRG4 configuration register */
+-	u32 brgc5;		/* BRG5 configuration register */
+-	u32 brgc6;		/* BRG6 configuration register */
+-	u32 brgc7;		/* BRG7 configuration register */
+-	u32 brgc8;		/* BRG8 configuration register */
+-	u32 brgc9;		/* BRG9 configuration register */
+-	u32 brgc10;		/* BRG10 configuration register */
+-	u32 brgc11;		/* BRG11 configuration register */
+-	u32 brgc12;		/* BRG12 configuration register */
+-	u32 brgc13;		/* BRG13 configuration register */
+-	u32 brgc14;		/* BRG14 configuration register */
+-	u32 brgc15;		/* BRG15 configuration register */
+-	u32 brgc16;		/* BRG16 configuration register */
+-	u8 res0[0x40];
+-} brg83xx_t;
+-
+-/*
+-* USB
+-*/
+-
+-typedef struct usb83xx {
+-	u8 usmod;		/* USB mode register */
+-	u8 usadd;		/* USB address register */
+-	u8 uscom;		/* USB command register */
+-	u8 res0[0x1];
+-	u16 usep0;		/* USB endpoint register 0 */
+-	u16 usep1;		/* USB endpoint register 1 */
+-	u16 usep2;		/* USB endpoint register 2 */
+-	u16 usep3;		/* USB endpoint register 3 */
+-	u8 res1[0x4];
+-	u16 usber;		/* USB event register */
+-	u8 res2[0x2];
+-	u16 usbmr;		/* USB mask register */
+-	u8 res3[0x1];
+-	u8 usbs;		/* USB status register */
+-	u32 ussft;		/* USB start of frame timer */
+-	u8 res4[0x24];
+-} usb83xx_t;
+-
+-/*
+-* SI
+-*/
+-
+-typedef struct si1_83xx {
+-	u16 siamr1;		/* SI1 TDMA mode register */
+-	u16 sibmr1;		/* SI1 TDMB mode register */
+-	u16 sicmr1;		/* SI1 TDMC mode register */
+-	u16 sidmr1;		/* SI1 TDMD mode register */
+-	u8 siglmr1_h;		/* SI1 global mode register high */
+-	u8 res0[0x1];
+-	u8 sicmdr1_h;		/* SI1 command register high */
+-	u8 res2[0x1];
+-	u8 sistr1_h;		/* SI1 status register high */
+-	u8 res3[0x1];
+-	u16 sirsr1_h;		/* SI1 RAM shadow address register high */
+-	u8 sitarc1;		/* SI1 RAM counter Tx TDMA */
+-	u8 sitbrc1;		/* SI1 RAM counter Tx TDMB */
+-	u8 sitcrc1;		/* SI1 RAM counter Tx TDMC */
+-	u8 sitdrc1;		/* SI1 RAM counter Tx TDMD */
+-	u8 sirarc1;		/* SI1 RAM counter Rx TDMA */
+-	u8 sirbrc1;		/* SI1 RAM counter Rx TDMB */
+-	u8 sircrc1;		/* SI1 RAM counter Rx TDMC */
+-	u8 sirdrc1;		/* SI1 RAM counter Rx TDMD */
+-	u8 res4[0x8];
+-	u16 siemr1;		/* SI1 TDME mode register 16 bits */
+-	u16 sifmr1;		/* SI1 TDMF mode register 16 bits */
+-	u16 sigmr1;		/* SI1 TDMG mode register 16 bits */
+-	u16 sihmr1;		/* SI1 TDMH mode register 16 bits */
+-	u8 siglmg1_l;		/* SI1 global mode register low 8 bits */
+-	u8 res5[0x1];
+-	u8 sicmdr1_l;		/* SI1 command register low 8 bits */
+-	u8 res6[0x1];
+-	u8 sistr1_l;		/* SI1 status register low 8 bits */
+-	u8 res7[0x1];
+-	u16 sirsr1_l;		/* SI1 RAM shadow address register low 16 bits */
+-	u8 siterc1;		/* SI1 RAM counter Tx TDME 8 bits */
+-	u8 sitfrc1;		/* SI1 RAM counter Tx TDMF 8 bits */
+-	u8 sitgrc1;		/* SI1 RAM counter Tx TDMG 8 bits */
+-	u8 sithrc1;		/* SI1 RAM counter Tx TDMH 8 bits */
+-	u8 sirerc1;		/* SI1 RAM counter Rx TDME 8 bits */
+-	u8 sirfrc1;		/* SI1 RAM counter Rx TDMF 8 bits */
+-	u8 sirgrc1;		/* SI1 RAM counter Rx TDMG 8 bits */
+-	u8 sirhrc1;		/* SI1 RAM counter Rx TDMH 8 bits */
+-	u8 res8[0x8];
+-	u32 siml1;		/* SI1 multiframe limit register */
+-	u8 siedm1;		/* SI1 extended diagnostic mode register */
+-	u8 res9[0xBB];
+-} si1_83xx_t;
+-
+-/*
+-*  SI Routing Tables
+-*/
+-
+-typedef struct sir83xx {
+-	u8 tx[0x400];
+-	u8 rx[0x400];
+-	u8 res0[0x800];
+-} sir83xx_t;
+-
+-/*
+-* ucc
+-*/
+-
+-typedef struct uslow {
+-	u32 gumr_l;		/* UCCx general mode register (low) */
+-	u32 gumr_h;		/* UCCx general mode register (high) */
+-	u16 upsmr;		/* UCCx protocol-specific mode register */
+-	u8 res0[0x2];
+-	u16 utodr;		/* UCCx transmit on demand register */
+-	u16 udsr;		/* UCCx data synchronization register */
+-	u16 ucce;		/* UCCx event register */
+-	u8 res1[0x2];
+-	u16 uccm;		/* UCCx mask register */
+-	u8 res2[0x1];
+-	u8 uccs;		/* UCCx status register */
+-	u8 res3[0x1E8];
+-} uslow_t;
+-
+-typedef struct ufast {
+-	u32 gumr;		/* UCCx general mode register */
+-	u32 upsmr;		/* UCCx protocol-specific mode register	 */
+-	u16 utodr;		/* UCCx transmit on demand register  */
+-	u8 res0[0x2];
+-	u16 udsr;		/* UCCx data synchronization register  */
+-	u8 res1[0x2];
+-	u32 ucce;		/* UCCx event register */
+-	u32 uccm;		/* UCCx mask register.	*/
+-	u8 uccs;		/* UCCx status register */
+-	u8 res2[0x7];
+-	u32 urfb;		/* UCC receive FIFO base  */
+-	u16 urfs;		/* UCC receive FIFO size  */
+-	u8 res3[0x2];
+-	u16 urfet;		/* UCC receive FIFO emergency threshold	 */
+-	u16 urfset;		/* UCC receive FIFO special emergency threshold	 */
+-	u32 utfb;		/* UCC transmit FIFO base */
+-	u16 utfs;		/* UCC transmit FIFO size  */
+-	u8 res4[0x2];
+-	u16 utfet;		/* UCC transmit FIFO emergency threshold */
+-	u8 res5[0x2];
+-	u16 utftt;		/* UCC transmit FIFO transmit threshold */
+-	u8 res6[0x2];
+-	u16 utpt;		/* UCC transmit polling timer */
+-	u32 urtry;		/* UCC retry counter register */
+-	u8 res7[0x4C];
+-	u8 guemr;		/* UCC general extended mode register */
+-	u8 res8[0x3];
+-	u8 res9[0x6C];
+-	u32 maccfg1;		/* Mac configuration register #1  */
+-	u32 maccfg2;		/* Mac configuration register #2  */
+-	u16 ipgifg;		/* Interframe gap register  */
+-	u8 res10[0x2];
+-	u32 hafdup;		/* Half-duplex register	 */
+-	u8 res11[0xC];
+-	u32 emtr;		/* Ethernet MAC test register  */
+-	u32 miimcfg;		/* MII mgmt configuration register  */
+-	u32 miimcom;		/* MII mgmt command register  */
+-	u32 miimadd;		/* MII mgmt address register  */
+-	u32 miimcon;		/* MII mgmt control register  */
+-	u32 miistat;		/* MII mgmt status register */
+-	u32 miimnd;		/* MII mgmt indication register */
+-	u32 ifctl;		/* Interface control register  */
+-	u32 ifstat;		/* Interface status register  */
+-	u32 macstnaddr1;	/* Station address part 1 register */
+-	u32 macstnaddr2;	/* Station address part 2 register */
+-	u8 res12[0x8];
+-	u32 uempr;		/* UCC Ethernet MAC parameter register */
+-	u32 utbipa;		/* UCC TBI address */
+-	u16 uescr;		/* UCC Ethernet statistics control register */
+-	u8 res13[0x26];
+-	u32 tx64;		/* Transmit and receive 64-byte frame counter */
+-	u32 tx127;		/* Transmit and receive 65- to 127-byte frame counter */
+-	u32 tx255;		/* Transmit and receive 128- to 255-byte frame counter */
+-	u32 rx64;		/* Receive and receive 64-byte frame counter */
+-	u32 rx127;		/* Receive and receive 65- to 127-byte frame counter */
+-	u32 rx255;		/* Receive and receive 128- to 255-byte frame counter */
+-	u32 txok;		/* Transmit good bytes counter */
+-	u32 txcf;		/* Transmit control frame counter */
+-	u32 tmca;		/* Transmit multicast control frame counter */
+-	u32 tbca;		/* Transmit broadcast packet counter */
+-	u32 rxfok;		/* Receive frame OK counter */
+-	u32 rbyt;		/* Receive good and bad bytes counter */
+-	u32 rxbok;		/* Receive bytes OK counter */
+-	u32 rmca;		/* Receive multicast packet counter */
+-	u32 rbca;		/* Receive broadcast packet counter */
+-	u32 scar;		/* Statistics carry register */
+-	u32 scam;		/* Statistics carry mask register */
+-	u8 res14[0x3C];
+-} ufast_t;
+-
+-typedef struct ucc83xx {
+-	union {
+-		uslow_t slow;
+-		ufast_t fast;
+-	};
+-} ucc83xx_t;
+-
+-/*
+-*  MultiPHY UTOPIA POS Controllers
+-*/
+-
+-typedef struct upc83xx {
+-	u32 upgcr;		/* UTOPIA/POS general configuration register  */
+-#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+-#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+-#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+-#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing: */
+-#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+-	u32 uplpa;		/* UTOPIA/POS last PHY address */
+-	u32 uphec;		/* ATM HEC register */
+-	u32 upuc;		/* UTOPIA/POS UCC configuration */
+-	u32 updc1;		/* UTOPIA/POS device 1 configuration */
+-	u32 updc2;		/* UTOPIA/POS device 2 configuration  */
+-	u32 updc3;		/* UTOPIA/POS device 3 configuration */
+-	u32 updc4;		/* UTOPIA/POS device 4 configuration  */
+-	u32 upstpa;		/* UTOPIA/POS STPA threshold  */
+-	u8 res0[0xC];
+-	u32 updrs1_h;		/* UTOPIA/POS device 1 rate select  */
+-	u32 updrs1_l;		/* UTOPIA/POS device 1 rate select  */
+-	u32 updrs2_h;		/* UTOPIA/POS device 2 rate select  */
+-	u32 updrs2_l;		/* UTOPIA/POS device 2 rate select */
+-	u32 updrs3_h;		/* UTOPIA/POS device 3 rate select */
+-	u32 updrs3_l;		/* UTOPIA/POS device 3 rate select */
+-	u32 updrs4_h;		/* UTOPIA/POS device 4 rate select */
+-	u32 updrs4_l;		/* UTOPIA/POS device 4 rate select */
+-	u32 updrp1;		/* UTOPIA/POS device 1 receive priority low  */
+-	u32 updrp2;		/* UTOPIA/POS device 2 receive priority low  */
+-	u32 updrp3;		/* UTOPIA/POS device 3 receive priority low  */
+-	u32 updrp4;		/* UTOPIA/POS device 4 receive priority low  */
+-	u32 upde1;		/* UTOPIA/POS device 1 event */
+-	u32 upde2;		/* UTOPIA/POS device 2 event */
+-	u32 upde3;		/* UTOPIA/POS device 3 event */
+-	u32 upde4;		/* UTOPIA/POS device 4 event */
+-	u16 uprp1;
+-	u16 uprp2;
+-	u16 uprp3;
+-	u16 uprp4;
+-	u8 res1[0x8];
+-	u16 uptirr1_0;		/* Device 1 transmit internal rate 0 */
+-	u16 uptirr1_1;		/* Device 1 transmit internal rate 1 */
+-	u16 uptirr1_2;		/* Device 1 transmit internal rate 2 */
+-	u16 uptirr1_3;		/* Device 1 transmit internal rate 3 */
+-	u16 uptirr2_0;		/* Device 2 transmit internal rate 0 */
+-	u16 uptirr2_1;		/* Device 2 transmit internal rate 1 */
+-	u16 uptirr2_2;		/* Device 2 transmit internal rate 2 */
+-	u16 uptirr2_3;		/* Device 2 transmit internal rate 3 */
+-	u16 uptirr3_0;		/* Device 3 transmit internal rate 0 */
+-	u16 uptirr3_1;		/* Device 3 transmit internal rate 1 */
+-	u16 uptirr3_2;		/* Device 3 transmit internal rate 2 */
+-	u16 uptirr3_3;		/* Device 3 transmit internal rate 3 */
+-	u16 uptirr4_0;		/* Device 4 transmit internal rate 0 */
+-	u16 uptirr4_1;		/* Device 4 transmit internal rate 1 */
+-	u16 uptirr4_2;		/* Device 4 transmit internal rate 2 */
+-	u16 uptirr4_3;		/* Device 4 transmit internal rate 3 */
+-	u32 uper1;		/* Device 1 port enable register */
+-	u32 uper2;		/* Device 2 port enable register */
+-	u32 uper3;		/* Device 3 port enable register */
+-	u32 uper4;		/* Device 4 port enable register */
+-	u8 res2[0x150];
+-} upc83xx_t;
+-
+-/*
+-* SDMA
+-*/
+-
+-typedef struct sdma83xx {
+-	u32 sdsr;		/* Serial DMA status register */
+-	u32 sdmr;		/* Serial DMA mode register */
+-	u32 sdtr1;		/* SDMA system bus threshold register */
+-	u32 sdtr2;		/* SDMA secondary bus threshold register */
+-	u32 sdhy1;		/* SDMA system bus hysteresis register */
+-	u32 sdhy2;		/* SDMA secondary bus hysteresis register */
+-	u32 sdta1;		/* SDMA system bus address register */
+-	u32 sdta2;		/* SDMA secondary bus address register */
+-	u32 sdtm1;		/* SDMA system bus MSNUM register */
+-	u32 sdtm2;		/* SDMA secondary bus MSNUM register */
+-	u8 res0[0x10];
+-	u32 sdaqr;		/* SDMA address bus qualify register */
+-	u32 sdaqmr;		/* SDMA address bus qualify mask register */
+-	u8 res1[0x4];
+-	u32 sdwbcr;		/* SDMA CAM entries base register */
+-	u8 res2[0x38];
+-} sdma83xx_t;
+-
+-/*
+-* Debug Space
+-*/
+-
+-typedef struct dbg83xx {
+-	u32 bpdcr;		/* Breakpoint debug command register */
+-	u32 bpdsr;		/* Breakpoint debug status register */
+-	u32 bpdmr;		/* Breakpoint debug mask register */
+-	u32 bprmrr0;		/* Breakpoint request mode risc register 0 */
+-	u32 bprmrr1;		/* Breakpoint request mode risc register 1 */
+-	u8 res0[0x8];
+-	u32 bprmtr0;		/* Breakpoint request mode trb register 0 */
+-	u32 bprmtr1;		/* Breakpoint request mode trb register 1 */
+-	u8 res1[0x8];
+-	u32 bprmir;		/* Breakpoint request mode immediate register */
+-	u32 bprmsr;		/* Breakpoint request mode serial register */
+-	u32 bpemr;		/* Breakpoint exit mode register */
+-	u8 res2[0x48];
+-} dbg83xx_t;
+-
+-/*
+-*  RISC Special Registers (Trap and Breakpoint)
+-*/
+-
+-typedef struct rsp83xx {
+-	u8 fixme[0x100];
+-} rsp83xx_t;
+-#endif
++#if defined(CONFIG_MPC8349)
++typedef struct immap {
++	sysconf83xx_t		sysconf;	/* System configuration */
++	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
++	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
++	rtclk83xx_t		pit;		/* Periodic Interval Timer */
++	gtm83xx_t		gtm[2];		/* Global Timers Module */
++	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
++	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
++	reset83xx_t		reset;		/* Reset Module */
++	clk83xx_t		clk;		/* System Clock Module */
++	pmc83xx_t		pmc;		/* Power Management Control Module */
++	gpio83xx_t		gpio[2];	/* General purpose I/O module */
++	u8			res0[0x200];
++	u8			dll_ddr[0x100];
++	u8			dll_lbc[0x100];
++	u8			res1[0xE00];
++	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
++	fsl_i2c_t		i2c[2];		/* I2C Controllers */
++	u8			res2[0x1300];
++	duart83xx_t		duart[2];	/* DUART */
++	u8			res3[0x900];
++	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
++	u8			res4[0x1000];
++	spi83xx_t		spi;		/* Serial Peripheral Interface */
++	dma83xx_t		dma;		/* DMA */
++	pciconf83xx_t		pci_conf[2];	/* PCI Software Configuration Registers */
++	ios83xx_t		ios;		/* Sequencer */
++	pcictrl83xx_t		pci_ctrl[2];	/* PCI Controller Control and Status Registers */
++	u8			res5[0x19900];
++	usb83xx_t		usb;
++	tsec83xx_t		tsec[2];
++	u8			res6[0xA000];
++	security83xx_t		security;
++	u8			res7[0xC0000];
++} immap_t;
+ 
++#elif defined(CONFIG_MPC8360)
+ typedef struct immap {
+-	sysconf83xx_t sysconf;	/* System configuration */
+-	wdt83xx_t wdt;		/* Watch Dog Timer (WDT) Registers */
+-	rtclk83xx_t rtc;	/* Real Time Clock Module Registers */
+-	rtclk83xx_t pit;	/* Periodic Interval Timer */
+-	gtm83xx_t gtm[2];	/* Global Timers Module */
+-	ipic83xx_t ipic;	/* Integrated Programmable Interrupt Controller */
+-	arbiter83xx_t arbiter;	/* System Arbiter Registers */
+-	reset83xx_t reset;	/* Reset Module */
+-	clk83xx_t clk;		/* System Clock Module */
+-	pmc83xx_t pmc;		/* Power Management Control Module */
+-#if defined (CONFIG_MPC8349)
+-	gpio83xx_t pgio[2];	/* general purpose I/O module */
+-#elif defined (CONFIG_MPC8360)
+-	qepi83xx_t qepi;	/* QE Ports Interrupts Registers */
+-#endif
+-	u8 res0[0x200];
+-#if defined (CONFIG_MPC8360)
+-	u8 DLL_LBDDR[0x100];
+-#endif
+-	u8 DDL_DDR[0x100];
+-	u8 DDL_LBIU[0x100];
+-#if defined (CONFIG_MPC8349)
+-	u8 res1[0xE00];
+-#elif defined (CONFIG_MPC8360)
+-	u8 res1[0x200];
+-	gpio83xx_t gpio;	/* General purpose I/O module */
+-	qesba83xx_t qesba;	/* QE Secondary Bus Access Windows */
+-#endif
+-	ddr83xx_t ddr;		/* DDR Memory Controller Memory */
+-	fsl_i2c_t i2c[2];	/* I2C Controllers */
+-	u8 res2[0x1300];
+-	duart83xx_t duart[2];	/* DUART */
+-#if defined (CONFIG_MPC8349)
+-	u8 res3[0x900];
+-	lbus83xx_t lbus;	/* Local Bus Controller Registers */
+-	u8 res4[0x1000];
+-	spi83xx_t spi;		/* Serial Peripheral Interface */
+-	u8 res5[0xF00];
+-#elif defined (CONFIG_MPC8360)
+-	u8 res3[0x900];
+-	lbus83xx_t lbus;	/* Local Bus Controller */
+-	u8 res4[0x2000];
+-#endif
+-	dma83xx_t dma;		/* DMA */
+-#if defined (CONFIG_MPC8349)
+-	pciconf83xx_t pci_conf[2];	/* PCI Software Configuration Registers */
+-	ios83xx_t ios;		/* Sequencer */
+-	pcictrl83xx_t pci_ctrl[2];	/* PCI Controller Control and Status Registers */
+-	u8 res6[0x19900];
+-	usb83xx_t usb;
+-	tsec83xx_t tsec[2];
+-	u8 res7[0xA000];
+-	security83xx_t security;
+-#elif defined (CONFIG_MPC8360)
+-	pciconf83xx_t pci_conf[1];	/* PCI Software Configuration Registers */
+-	u8 res_5[128];
+-	ios83xx_t ios;		/* Sequencer (IOS) */
+-	pcictrl83xx_t pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+-	u8 res6[0x4A00];
+-	ddr83xx_t ddr_secondary;	/* Secondary DDR Memory Controller Memory Map */
+-	u8 res7[0x22000];
+-	security83xx_t security;
+-	u8 res8[0xC0000];
+-	iram83xx_t iram;	/* IRAM */
+-	irq83xx_t irq;		/* Interrupt Controller */
+-	cp83xx_t cp;		/* Communications Processor */
+-	qmx83xx_t qmx;		/* QE Multiplexer */
+-	qet83xx_t qet;		/* QE Timers */
+-	spi83xx_t spi[0x2];	/* spi	*/
+-	mcc83xx_t mcc;		/* mcc */
+-	brg83xx_t brg;		/* brg */
+-	usb83xx_t usb;		/* USB */
+-	si1_83xx_t si1;		/* SI */
+-	u8 res9[0x800];
+-	sir83xx_t sir;		/* SI Routing Tables  */
+-	ucc83xx_t ucc1;		/* ucc1 */
+-	ucc83xx_t ucc3;		/* ucc3 */
+-	ucc83xx_t ucc5;		/* ucc5 */
+-	ucc83xx_t ucc7;		/* ucc7 */
+-	u8 res10[0x600];
+-	upc83xx_t upc1;		/* MultiPHY UTOPIA POS Controller 1 */
+-	ucc83xx_t ucc2;		/* ucc2 */
+-	ucc83xx_t ucc4;		/* ucc4 */
+-	ucc83xx_t ucc6;		/* ucc6 */
+-	ucc83xx_t ucc8;		/* ucc8 */
+-	u8 res11[0x600];
+-	upc83xx_t upc2;		/* MultiPHY UTOPIA POS Controller 2 */
+-	sdma83xx_t sdma;	/* SDMA */
+-	dbg83xx_t dbg;		/* Debug Space */
+-	rsp83xx_t rsp[0x2];	/* RISC Special Registers (Trap and Breakpoint) */
+-	u8 res12[0x300];
+-	u8 res13[0x3A00];
+-	u8 res14[0x8000];	/* 0x108000 -  0x110000 */
+-	u8 res15[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
+-	u8 res16[0x24000];	/* 0x11C000 -  0x140000 */
+-	u8 res17[0xC0000];	/* 0x140000 -  0x200000 */
+-#endif
++	sysconf83xx_t		sysconf;	/* System configuration */
++	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
++	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
++	rtclk83xx_t		pit;		/* Periodic Interval Timer */
++	u8			res0[0x200];
++	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
++	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
++	reset83xx_t		reset;		/* Reset Module */
++	clk83xx_t		clk;		/* System Clock Module */
++	pmc83xx_t		pmc;		/* Power Management Control Module */
++	qepi83xx_t		qepi;		/* QE Ports Interrupts Registers */
++	u8			res1[0x300];
++	u8			dll_ddr[0x100];
++	u8			dll_lbc[0x100];
++	u8			res2[0x200];
++	qepio83xx_t		qepio;		/* QE Parallel I/O ports */
++	qesba83xx_t		qesba;		/* QE Secondary Bus Access Windows */
++	u8			res3[0x400];
++	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
++	fsl_i2c_t		i2c[2];		/* I2C Controllers */
++	u8			res4[0x1300];
++	duart83xx_t		duart[2];	/* DUART */
++	u8			res5[0x900];
++	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
++	u8			res6[0x2000];
++	dma83xx_t		dma;		/* DMA */
++	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
++	u8			res7[128];
++	ios83xx_t		ios;		/* Sequencer (IOS) */
++	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
++	u8			res8[0x4A00];
++	ddr83xx_t		ddr_secondary;	/* Secondary DDR Memory Controller Memory Map */
++	u8			res9[0x22000];
++	security83xx_t		security;
++	u8			res10[0xC0000];
++	u8			qe[0x100000];	/* QE block */
+ } immap_t;
++#endif
+ 
+ #endif				/* __IMMAP_83xx__ */
+diff --git a/include/mpc83xx.h b/include/mpc83xx.h
+index 03dd0ca..504b6a9 100644
+--- a/include/mpc83xx.h
++++ b/include/mpc83xx.h
+@@ -10,12 +10,6 @@
+  * the License, or (at your option) any later version.
+  */
+ 
+-/*
+- * mpc83xx.h
+- *
+- * MPC83xx specific definitions
+- */
+-
+ #ifndef __MPC83XX_H__
+ #define __MPC83XX_H__
+ 
+@@ -24,406 +18,941 @@
+ #include <asm/e300.h>
+ #endif
+ 
+-/*
+- * MPC83xx cpu provide RCR register to do reset thing specially. easier
+- * to implement
++/* MPC83xx cpu provide RCR register to do reset thing specially
+  */
+-
+ #define MPC83xx_RESET
+ 
+-/*
+- * System reset offset (PowerPC standard)
++/* System reset offset (PowerPC standard)
+  */
+-#define EXC_OFF_SYS_RESET	0x0100
++#define EXC_OFF_SYS_RESET		0x0100
+ 
+-/*
+- * Default Internal Memory Register Space (Freescale recomandation)
++/* IMMRBAR - Internal Memory Register Base Address
+  */
+-#define CONFIG_DEFAULT_IMMR 0xFF400000
++#define CONFIG_DEFAULT_IMMR		0xFF400000	/* Default IMMR base address */
++#define IMMRBAR				0x0000		/* Register offset to immr */
++#define IMMRBAR_BASE_ADDR		0xFFF00000	/* Base address mask */
++#define IMMRBAR_RES			~(IMMRBAR_BASE_ADDR)
+ 
+-/*
+- * Watchdog
++/* LAWBAR - Local Access Window Base Address Register
+  */
+-#define SWCRR      0x0204
+-#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
+-#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
+-#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */
+-#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
+-#define SWCRR_RES  ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
++#define LBLAWBAR0			0x0020		/* Register offset to immr */
++#define LBLAWAR0			0x0024
++#define LBLAWBAR1			0x0028
++#define LBLAWAR1			0x002C
++#define LBLAWBAR2			0x0030
++#define LBLAWAR2			0x0034
++#define LBLAWBAR3			0x0038
++#define LBLAWAR3			0x003C
++#define LAWBAR_BAR			0xFFFFF000	/* Base address mask */
++
++/* SPRIDR - System Part and Revision ID Register
++ */
++#define SPRIDR_PARTID			0xFFFF0000	/* Part Identification */
++#define SPRIDR_REVID			0x0000FFFF	/* Revision Identification */
++
++#define SPR_8349E_REV10			0x80300100
++#define SPR_8349_REV10			0x80310100
++#define SPR_8347E_REV10_TBGA		0x80320100
++#define SPR_8347_REV10_TBGA		0x80330100
++#define SPR_8347E_REV10_PBGA		0x80340100
++#define SPR_8347_REV10_PBGA		0x80350100
++#define SPR_8343E_REV10			0x80360100
++#define SPR_8343_REV10			0x80370100
++
++#define SPR_8349E_REV11			0x80300101
++#define SPR_8349_REV11			0x80310101
++#define SPR_8347E_REV11_TBGA		0x80320101
++#define SPR_8347_REV11_TBGA		0x80330101
++#define SPR_8347E_REV11_PBGA		0x80340101
++#define SPR_8347_REV11_PBGA		0x80350101
++#define SPR_8343E_REV11			0x80360101
++#define SPR_8343_REV11			0x80370101
++
++#define SPR_8360E_REV10			0x80480010
++#define SPR_8360_REV10			0x80490010
++#define SPR_8360E_REV11			0x80480011
++#define SPR_8360_REV11			0x80490011
++#define SPR_8360E_REV12			0x80480012
++#define SPR_8360_REV12			0x80490012
++
++/* SPCR - System Priority Configuration Register
++ */
++#define SPCR_PCIHPE			0x10000000	/* PCI Highest Priority Enable */
++#define SPCR_PCIHPE_SHIFT		(31-3)
++#define SPCR_PCIPR			0x03000000	/* PCI bridge system bus request priority */
++#define SPCR_PCIPR_SHIFT		(31-7)
++#define SPCR_OPT			0x00800000	/* Optimize */
++#define SPCR_TBEN			0x00400000	/* E300 PowerPC core time base unit enable */
++#define SPCR_TBEN_SHIFT			(31-9)
++#define SPCR_COREPR			0x00300000	/* E300 PowerPC Core system bus request priority */
++#define SPCR_COREPR_SHIFT		(31-11)
++
++#if defined(CONFIG_MPC8349)
++/* SPCR bits - MPC8349 specific */
++#define SPCR_TSEC1DP			0x00003000	/* TSEC1 data priority */
++#define SPCR_TSEC1DP_SHIFT		(31-19)
++#define SPCR_TSEC1BDP			0x00000C00	/* TSEC1 buffer descriptor priority */
++#define SPCR_TSEC1BDP_SHIFT		(31-21)
++#define SPCR_TSEC1EP			0x00000300	/* TSEC1 emergency priority */
++#define SPCR_TSEC1EP_SHIFT		(31-23)
++#define SPCR_TSEC2DP			0x00000030	/* TSEC2 data priority */
++#define SPCR_TSEC2DP_SHIFT		(31-27)
++#define SPCR_TSEC2BDP			0x0000000C	/* TSEC2 buffer descriptor priority */
++#define SPCR_TSEC2BDP_SHIFT		(31-29)
++#define SPCR_TSEC2EP			0x00000003	/* TSEC2 emergency priority */
++#define SPCR_TSEC2EP_SHIFT		(31-31)
++#endif
+ 
+-#define SWCNR      0x0208
+-#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+-#define SWCNR_RES  ~(SWCNR_SWCN)
++/* SICRL/H - System I/O Configuration Register Low/High
++ */
++#if defined(CONFIG_MPC8349)
++/* SICRL bits - MPC8349 specific */
++#define SICRL_LDP_A			0x80000000
++#define SICRL_USB1			0x40000000
++#define SICRL_USB0			0x20000000
++#define SICRL_UART			0x0C000000
++#define SICRL_GPIO1_A			0x02000000
++#define SICRL_GPIO1_B			0x01000000
++#define SICRL_GPIO1_C			0x00800000
++#define SICRL_GPIO1_D			0x00400000
++#define SICRL_GPIO1_E			0x00200000
++#define SICRL_GPIO1_F			0x00180000
++#define SICRL_GPIO1_G			0x00040000
++#define SICRL_GPIO1_H			0x00020000
++#define SICRL_GPIO1_I			0x00010000
++#define SICRL_GPIO1_J			0x00008000
++#define SICRL_GPIO1_K			0x00004000
++#define SICRL_GPIO1_L			0x00003000
++
++/* SICRH bits - MPC8349 specific */
++#define SICRH_DDR			0x80000000
++#define SICRH_TSEC1_A			0x10000000
++#define SICRH_TSEC1_B			0x08000000
++#define SICRH_TSEC1_C			0x04000000
++#define SICRH_TSEC1_D			0x02000000
++#define SICRH_TSEC1_E			0x01000000
++#define SICRH_TSEC1_F			0x00800000
++#define SICRH_TSEC2_A			0x00400000
++#define SICRH_TSEC2_B			0x00200000
++#define SICRH_TSEC2_C			0x00100000
++#define SICRH_TSEC2_D			0x00080000
++#define SICRH_TSEC2_E			0x00040000
++#define SICRH_TSEC2_F			0x00020000
++#define SICRH_TSEC2_G			0x00010000
++#define SICRH_TSEC2_H			0x00008000
++#define SICRH_GPIO2_A			0x00004000
++#define SICRH_GPIO2_B			0x00002000
++#define SICRH_GPIO2_C			0x00001000
++#define SICRH_GPIO2_D			0x00000800
++#define SICRH_GPIO2_E			0x00000400
++#define SICRH_GPIO2_F			0x00000200
++#define SICRH_GPIO2_G			0x00000180
++#define SICRH_GPIO2_H			0x00000060
++#define SICRH_TSOBI1			0x00000002
++#define SICRH_TSOBI2			0x00000001
++
++#elif defined(CONFIG_MPC8360)
++/* SICRL bits - MPC8360 specific */
++#define SICRL_LDP_A			0xC0000000
++#define SICRL_LCLK_1			0x10000000
++#define SICRL_LCLK_2			0x08000000
++#define SICRL_SRCID_A			0x03000000
++#define SICRL_IRQ_CKSTP_A		0x00C00000
++
++/* SICRH bits - MPC8360 specific */
++#define SICRH_DDR			0x80000000
++#define SICRH_SECONDARY_DDR		0x40000000
++#define SICRH_SDDROE			0x20000000
++#define SICRH_IRQ3			0x10000000
++#define SICRH_UC1EOBI			0x00000004
++#define SICRH_UC2E1OBI			0x00000002
++#define SICRH_UC2E2OBI			0x00000001
++#endif
+ 
+-#define SWSRR      0x020E
++/* SWCRR - System Watchdog Control Register
++ */
++#define SWCRR				0x0204		/* Register offset to immr */
++#define SWCRR_SWTC			0xFFFF0000	/* Software Watchdog Time Count */
++#define SWCRR_SWEN			0x00000004	/* Watchdog Enable bit */
++#define SWCRR_SWRI			0x00000002	/* Software Watchdog Reset/Interrupt Select bit */
++#define SWCRR_SWPR			0x00000001	/* Software Watchdog Counter Prescale bit */
++#define SWCRR_RES			~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
++
++/* SWCNR - System Watchdog Counter Register
++ */
++#define SWCNR				0x0208		/* Register offset to immr */
++#define SWCNR_SWCN			0x0000FFFF	/* Software Watchdog Count mask */
++#define SWCNR_RES			~(SWCNR_SWCN)
+ 
+-/*
+- * Default Internal Memory Register Space (Freescale recomandation)
++/* SWSRR - System Watchdog Service Register
+  */
+-#define IMMRBAR 0x0000
+-#define IMMRBAR_BASE_ADDR     0xFFF00000 /* Identifies the 12 most-significant address bits of the base of the 1 MByte internal memory window. */
+-#define IMMRBAR_RES           ~(IMMRBAR_BASE_ADDR)
++#define SWSRR				0x020E		/* Register offset to immr */
+ 
+-/*
+- * Default Internal Memory Register Space (Freescale recomandation)
++/* ACR - Arbiter Configuration Register
+  */
+-#define LBLAWBAR0 0x0020
+-#define LBLAWAR0  0x0024
+-#define LBLAWBAR1 0x0028
+-#define LBLAWAR1  0x002C
+-#define LBLAWBAR2 0x0030
+-#define LBLAWAR2  0x0034
+-#define LBLAWBAR3 0x0038
+-#define LBLAWAR3  0x003C
++#define ACR_COREDIS			0x10000000	/* Core disable */
++#define ACR_COREDIS_SHIFT		(31-7)
++#define ACR_PIPE_DEP			0x00070000	/* Pipeline depth */
++#define ACR_PIPE_DEP_SHIFT		(31-15)
++#define ACR_PCI_RPTCNT			0x00007000	/* PCI repeat count */
++#define ACR_PCI_RPTCNT_SHIFT		(31-19)
++#define ACR_RPTCNT			0x00000700	/* Repeat count */
++#define ACR_RPTCNT_SHIFT		(31-23)
++#define ACR_APARK			0x00000030	/* Address parking */
++#define ACR_APARK_SHIFT			(31-27)
++#define ACR_PARKM			0x0000000F	/* Parking master */
++#define ACR_PARKM_SHIFT			(31-31)
++
++/* ATR - Arbiter Timers Register
++ */
++#define ATR_DTO				0x00FF0000	/* Data time out */
++#define ATR_ATO				0x000000FF	/* Address time out */
+ 
+-/*
+- * The device ID and revision numbers
+- */
+-#define SPR_8349E_REV10		0x80300100
+-#define SPR_8349_REV10		0x80310100
+-#define SPR_8347E_REV10_TBGA	0x80320100
+-#define SPR_8347_REV10_TBGA	0x80330100
+-#define SPR_8347E_REV10_PBGA	0x80340100
+-#define SPR_8347_REV10_PBGA	0x80350100
+-#define SPR_8343E_REV10		0x80360100
+-#define SPR_8343_REV10		0x80370100
+-
+-#define SPR_8349E_REV11		0x80300101
+-#define SPR_8349_REV11		0x80310101
+-#define SPR_8347E_REV11_TBGA	0x80320101
+-#define SPR_8347_REV11_TBGA	0x80330101
+-#define SPR_8347E_REV11_PBGA	0x80340101
+-#define SPR_8347_REV11_PBGA	0x80350101
+-#define SPR_8343E_REV11		0x80360101
+-#define SPR_8343_REV11		0x80370101
+-
+-#define SPR_8360E_REV10		0x80480010
+-#define SPR_8360_REV10		0x80490010
+-#define SPR_8360E_REV11		0x80480011
+-#define SPR_8360_REV11		0x80490011
+-#define SPR_8360E_REV12		0x80480012
+-#define SPR_8360_REV12		0x80490012
++/* AER - Arbiter Event Register
++ */
++#define AER_ETEA			0x00000020	/* Transfer error */
++#define AER_RES				0x00000010	/* Reserved transfer type */
++#define AER_ECW				0x00000008	/* External control word transfer type */
++#define AER_AO				0x00000004	/* Address Only transfer type */
++#define AER_DTO				0x00000002	/* Data time out */
++#define AER_ATO				0x00000001	/* Address time out */
++
++/* AEATR - Arbiter Event Address Register
++ */
++#define AEATR_EVENT			0x07000000	/* Event type */
++#define AEATR_MSTR_ID			0x001F0000	/* Master Id */
++#define AEATR_TBST			0x00000800	/* Transfer burst */
++#define AEATR_TSIZE			0x00000700	/* Transfer Size */
++#define AEATR_TTYPE			0x0000001F	/* Transfer Type */
+ 
+-/*
+- * Base Registers & Option Registers
+- */
+-#define BR0 0x5000
+-#define BR1 0x5008
+-#define BR2 0x5010
+-#define BR3 0x5018
+-#define BR4 0x5020
+-#define BR5 0x5028
+-#define BR6 0x5030
+-#define BR7 0x5038
+-
+-#define BR_BA		0xFFFF8000
+-#define BR_BA_SHIFT		15
+-#define BR_PS		0x00001800
+-#define BR_PS_SHIFT		11
+-#define BR_PS_8		0x00000800  /* Port Size 8 bit */
+-#define BR_PS_16	0x00001000  /* Port Size 16 bit */
+-#define BR_PS_32	0x00001800  /* Port Size 32 bit */
+-#define BR_DECC		0x00000600
+-#define BR_DECC_SHIFT		 9
+-#define BR_WP		0x00000100
+-#define BR_WP_SHIFT		 8
+-#define BR_MSEL		0x000000E0
+-#define BR_MSEL_SHIFT		 5
+-#define BR_MS_GPCM	0x00000000  /* GPCM */
+-#define BR_MS_SDRAM	0x00000060  /* SDRAM */
+-#define BR_MS_UPMA	0x00000080  /* UPMA */
+-#define BR_MS_UPMB	0x000000A0  /* UPMB */
+-#define BR_MS_UPMC	0x000000C0  /* UPMC */
+-#if defined (CONFIG_MPC8360)
+-#define BR_ATOM		0x0000000C
+-#define BR_ATOM_SHIFT		2
+-#endif
+-#define BR_V		0x00000001
+-#define BR_V_SHIFT		 0
+-#if defined (CONFIG_MPC8349)
+-#define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+-#elif defined (CONFIG_MPC8360)
+-#define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V)
++/* HRCWL - Hard Reset Configuration Word Low
++ */
++#define HRCWL_LBIUCM			0x80000000
++#define HRCWL_LBIUCM_SHIFT		31
++#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1	0x00000000
++#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1	0x80000000
++
++#define HRCWL_DDRCM			0x40000000
++#define HRCWL_DDRCM_SHIFT		30
++#define HRCWL_DDR_TO_SCB_CLK_1X1	0x00000000
++#define HRCWL_DDR_TO_SCB_CLK_2X1	0x40000000
++
++#define HRCWL_SPMF			0x0f000000
++#define HRCWL_SPMF_SHIFT		24
++#define HRCWL_CSB_TO_CLKIN_16X1		0x00000000
++#define HRCWL_CSB_TO_CLKIN_1X1		0x01000000
++#define HRCWL_CSB_TO_CLKIN_2X1		0x02000000
++#define HRCWL_CSB_TO_CLKIN_3X1		0x03000000
++#define HRCWL_CSB_TO_CLKIN_4X1		0x04000000
++#define HRCWL_CSB_TO_CLKIN_5X1		0x05000000
++#define HRCWL_CSB_TO_CLKIN_6X1		0x06000000
++#define HRCWL_CSB_TO_CLKIN_7X1		0x07000000
++#define HRCWL_CSB_TO_CLKIN_8X1		0x08000000
++#define HRCWL_CSB_TO_CLKIN_9X1		0x09000000
++#define HRCWL_CSB_TO_CLKIN_10X1		0x0A000000
++#define HRCWL_CSB_TO_CLKIN_11X1		0x0B000000
++#define HRCWL_CSB_TO_CLKIN_12X1		0x0C000000
++#define HRCWL_CSB_TO_CLKIN_13X1		0x0D000000
++#define HRCWL_CSB_TO_CLKIN_14X1		0x0E000000
++#define HRCWL_CSB_TO_CLKIN_15X1		0x0F000000
++
++#define HRCWL_VCO_BYPASS		0x00000000
++#define HRCWL_VCO_1X2			0x00000000
++#define HRCWL_VCO_1X4			0x00200000
++#define HRCWL_VCO_1X8			0x00400000
++
++#define HRCWL_COREPLL			0x007F0000
++#define HRCWL_COREPLL_SHIFT		16
++#define HRCWL_CORE_TO_CSB_BYPASS	0x00000000
++#define HRCWL_CORE_TO_CSB_1X1		0x00020000
++#define HRCWL_CORE_TO_CSB_1_5X1		0x00030000
++#define HRCWL_CORE_TO_CSB_2X1		0x00040000
++#define HRCWL_CORE_TO_CSB_2_5X1		0x00050000
++#define HRCWL_CORE_TO_CSB_3X1		0x00060000
++
++#if defined(CONFIG_MPC8360)
++#define HRCWL_CEVCOD			0x000000C0
++#define HRCWL_CEVCOD_SHIFT		6
++#define HRCWL_CE_PLL_VCO_DIV_4		0x00000000
++#define HRCWL_CE_PLL_VCO_DIV_8		0x00000040
++#define HRCWL_CE_PLL_VCO_DIV_2		0x00000080
++
++#define HRCWL_CEPDF			0x00000020
++#define HRCWL_CEPDF_SHIFT		5
++#define HRCWL_CE_PLL_DIV_1X1		0x00000000
++#define HRCWL_CE_PLL_DIV_2X1		0x00000020
++
++#define HRCWL_CEPMF			0x0000001F
++#define HRCWL_CEPMF_SHIFT		0
++#define HRCWL_CE_TO_PLL_1X16_		0x00000000
++#define HRCWL_CE_TO_PLL_1X2		0x00000002
++#define HRCWL_CE_TO_PLL_1X3		0x00000003
++#define HRCWL_CE_TO_PLL_1X4		0x00000004
++#define HRCWL_CE_TO_PLL_1X5		0x00000005
++#define HRCWL_CE_TO_PLL_1X6		0x00000006
++#define HRCWL_CE_TO_PLL_1X7		0x00000007
++#define HRCWL_CE_TO_PLL_1X8		0x00000008
++#define HRCWL_CE_TO_PLL_1X9		0x00000009
++#define HRCWL_CE_TO_PLL_1X10		0x0000000A
++#define HRCWL_CE_TO_PLL_1X11		0x0000000B
++#define HRCWL_CE_TO_PLL_1X12		0x0000000C
++#define HRCWL_CE_TO_PLL_1X13		0x0000000D
++#define HRCWL_CE_TO_PLL_1X14		0x0000000E
++#define HRCWL_CE_TO_PLL_1X15		0x0000000F
++#define HRCWL_CE_TO_PLL_1X16		0x00000010
++#define HRCWL_CE_TO_PLL_1X17		0x00000011
++#define HRCWL_CE_TO_PLL_1X18		0x00000012
++#define HRCWL_CE_TO_PLL_1X19		0x00000013
++#define HRCWL_CE_TO_PLL_1X20		0x00000014
++#define HRCWL_CE_TO_PLL_1X21		0x00000015
++#define HRCWL_CE_TO_PLL_1X22		0x00000016
++#define HRCWL_CE_TO_PLL_1X23		0x00000017
++#define HRCWL_CE_TO_PLL_1X24		0x00000018
++#define HRCWL_CE_TO_PLL_1X25		0x00000019
++#define HRCWL_CE_TO_PLL_1X26		0x0000001A
++#define HRCWL_CE_TO_PLL_1X27		0x0000001B
++#define HRCWL_CE_TO_PLL_1X28		0x0000001C
++#define HRCWL_CE_TO_PLL_1X29		0x0000001D
++#define HRCWL_CE_TO_PLL_1X30		0x0000001E
++#define HRCWL_CE_TO_PLL_1X31		0x0000001F
+ #endif
+ 
+-#define OR0 0x5004
+-#define OR1 0x500C
+-#define OR2 0x5014
+-#define OR3 0x501C
+-#define OR4 0x5024
+-#define OR5 0x502C
+-#define OR6 0x5034
+-#define OR7 0x503C
+-
+-#define OR_GPCM_AM		0xFFFF8000
+-#define OR_GPCM_AM_SHIFT		15
+-#define OR_GPCM_BCTLD		0x00001000
+-#define OR_GPCM_BCTLD_SHIFT		12
+-#define OR_GPCM_CSNT		0x00000800
+-#define OR_GPCM_CSNT_SHIFT		11
+-#define OR_GPCM_ACS		0x00000600
+-#define OR_GPCM_ACS_SHIFT		 9
+-#define OR_GPCM_ACS_0b10	0x00000400
+-#define OR_GPCM_ACS_0b11	0x00000600
+-#define OR_GPCM_XACS		0x00000100
+-#define OR_GPCM_XACS_SHIFT		 8
+-#define OR_GPCM_SCY		0x000000F0
+-#define OR_GPCM_SCY_SHIFT		 4
+-#define OR_GPCM_SCY_1		0x00000010
+-#define OR_GPCM_SCY_2		0x00000020
+-#define OR_GPCM_SCY_3		0x00000030
+-#define OR_GPCM_SCY_4		0x00000040
+-#define OR_GPCM_SCY_5		0x00000050
+-#define OR_GPCM_SCY_6		0x00000060
+-#define OR_GPCM_SCY_7		0x00000070
+-#define OR_GPCM_SCY_8		0x00000080
+-#define OR_GPCM_SCY_9		0x00000090
+-#define OR_GPCM_SCY_10		0x000000a0
+-#define OR_GPCM_SCY_11		0x000000b0
+-#define OR_GPCM_SCY_12		0x000000c0
+-#define OR_GPCM_SCY_13		0x000000d0
+-#define OR_GPCM_SCY_14		0x000000e0
+-#define OR_GPCM_SCY_15		0x000000f0
+-#define OR_GPCM_SETA		0x00000008
+-#define OR_GPCM_SETA_SHIFT		 3
+-#define OR_GPCM_TRLX		0x00000004
+-#define OR_GPCM_TRLX_SHIFT		 2
+-#define OR_GPCM_EHTR		0x00000002
+-#define OR_GPCM_EHTR_SHIFT		 1
+-#define OR_GPCM_EAD		0x00000001
+-#define OR_GPCM_EAD_SHIFT		 0
+-
+-#define OR_UPM_AM    0xFFFF8000
+-#define OR_UPM_AM_SHIFT      15
+-#define OR_UPM_XAM   0x00006000
+-#define OR_UPM_XAM_SHIFT     13
+-#define OR_UPM_BCTLD 0x00001000
+-#define OR_UPM_BCTLD_SHIFT   12
+-#define OR_UPM_BI    0x00000100
+-#define OR_UPM_BI_SHIFT       8
+-#define OR_UPM_TRLX  0x00000004
+-#define OR_UPM_TRLX_SHIFT     2
+-#define OR_UPM_EHTR  0x00000002
+-#define OR_UPM_EHTR_SHIFT     1
+-#define OR_UPM_EAD   0x00000001
+-#define OR_UPM_EAD_SHIFT      0
+-
+-#define OR_SDRAM_AM    0xFFFF8000
+-#define OR_SDRAM_AM_SHIFT      15
+-#define OR_SDRAM_XAM   0x00006000
+-#define OR_SDRAM_XAM_SHIFT     13
+-#define OR_SDRAM_COLS  0x00001C00
+-#define OR_SDRAM_COLS_SHIFT    10
+-#define OR_SDRAM_ROWS  0x000001C0
+-#define OR_SDRAM_ROWS_SHIFT     6
+-#define OR_SDRAM_PMSEL 0x00000020
+-#define OR_SDRAM_PMSEL_SHIFT    5
+-#define OR_SDRAM_EAD   0x00000001
+-#define OR_SDRAM_EAD_SHIFT      0
+-
+-/*
+- * Hard Reset Configration Word - High
++/* HRCWH - Hardware Reset Configuration Word High
+  */
+-#define HRCWH_PCI_AGENT              0x00000000
+-#define HRCWH_PCI_HOST               0x80000000
++#define HRCWH_PCI_HOST			0x80000000
++#define HRCWH_PCI_HOST_SHIFT		31
++#define HRCWH_PCI_AGENT			0x00000000
+ 
+-#if defined (CONFIG_MPC8349)
+-#define HRCWH_32_BIT_PCI             0x00000000
+-#define HRCWH_64_BIT_PCI             0x40000000
++#if defined(CONFIG_MPC8349)
++#define HRCWH_32_BIT_PCI		0x00000000
++#define HRCWH_64_BIT_PCI		0x40000000
+ #endif
+ 
+-#define HRCWH_PCI1_ARBITER_DISABLE   0x00000000
+-#define HRCWH_PCI1_ARBITER_ENABLE    0x20000000
++#define HRCWH_PCI1_ARBITER_DISABLE	0x00000000
++#define HRCWH_PCI1_ARBITER_ENABLE	0x20000000
++
++#define HRCWH_PCI_ARBITER_DISABLE	0x00000000
++#define HRCWH_PCI_ARBITER_ENABLE	0x20000000
+ 
+-#if defined (CONFIG_MPC8349)
+-#define HRCWH_PCI2_ARBITER_DISABLE   0x00000000
+-#define HRCWH_PCI2_ARBITER_ENABLE    0x10000000
+-#elif defined (CONFIG_MPC8360)
+-#define HRCWH_PCICKDRV_DISABLE       0x00000000
+-#define HRCWH_PCICKDRV_ENABLE        0x10000000
++#if defined(CONFIG_MPC8349)
++#define HRCWH_PCI2_ARBITER_DISABLE	0x00000000
++#define HRCWH_PCI2_ARBITER_ENABLE	0x10000000
++
++#elif defined(CONFIG_MPC8360)
++#define HRCWH_PCICKDRV_DISABLE		0x00000000
++#define HRCWH_PCICKDRV_ENABLE		0x10000000
+ #endif
+ 
+-#define HRCWH_CORE_DISABLE           0x08000000
+-#define HRCWH_CORE_ENABLE            0x00000000
++#define HRCWH_CORE_DISABLE		0x08000000
++#define HRCWH_CORE_ENABLE		0x00000000
+ 
+-#define HRCWH_FROM_0X00000100        0x00000000
+-#define HRCWH_FROM_0XFFF00100        0x04000000
++#define HRCWH_FROM_0X00000100		0x00000000
++#define HRCWH_FROM_0XFFF00100		0x04000000
+ 
+-#define HRCWH_BOOTSEQ_DISABLE        0x00000000
+-#define HRCWH_BOOTSEQ_NORMAL         0x01000000
+-#define HRCWH_BOOTSEQ_EXTENDED       0x02000000
++#define HRCWH_BOOTSEQ_DISABLE		0x00000000
++#define HRCWH_BOOTSEQ_NORMAL		0x01000000
++#define HRCWH_BOOTSEQ_EXTENDED		0x02000000
+ 
+-#define HRCWH_SW_WATCHDOG_DISABLE    0x00000000
+-#define HRCWH_SW_WATCHDOG_ENABLE     0x00800000
++#define HRCWH_SW_WATCHDOG_DISABLE	0x00000000
++#define HRCWH_SW_WATCHDOG_ENABLE	0x00800000
+ 
+-#define HRCWH_ROM_LOC_DDR_SDRAM      0x00000000
+-#define HRCWH_ROM_LOC_PCI1           0x00100000
+-#if defined (CONFIG_MPC8349)
+-#define HRCWH_ROM_LOC_PCI2           0x00200000
++#define HRCWH_ROM_LOC_DDR_SDRAM		0x00000000
++#define HRCWH_ROM_LOC_PCI1		0x00100000
++#if defined(CONFIG_MPC8349)
++#define HRCWH_ROM_LOC_PCI2		0x00200000
+ #endif
+-#define HRCWH_ROM_LOC_LOCAL_8BIT     0x00500000
+-#define HRCWH_ROM_LOC_LOCAL_16BIT    0x00600000
+-#define HRCWH_ROM_LOC_LOCAL_32BIT    0x00700000
+-
+-#if defined (CONFIG_MPC8349)
+-#define HRCWH_TSEC1M_IN_RGMII        0x00000000
+-#define HRCWH_TSEC1M_IN_RTBI         0x00004000
+-#define HRCWH_TSEC1M_IN_GMII         0x00008000
+-#define HRCWH_TSEC1M_IN_TBI          0x0000C000
+-
+-#define HRCWH_TSEC2M_IN_RGMII        0x00000000
+-#define HRCWH_TSEC2M_IN_RTBI         0x00001000
+-#define HRCWH_TSEC2M_IN_GMII         0x00002000
+-#define HRCWH_TSEC2M_IN_TBI          0x00003000
++#define HRCWH_ROM_LOC_LOCAL_8BIT	0x00500000
++#define HRCWH_ROM_LOC_LOCAL_16BIT	0x00600000
++#define HRCWH_ROM_LOC_LOCAL_32BIT	0x00700000
++
++#if defined(CONFIG_MPC8349)
++#define HRCWH_TSEC1M_IN_RGMII		0x00000000
++#define HRCWH_TSEC1M_IN_RTBI		0x00004000
++#define HRCWH_TSEC1M_IN_GMII		0x00008000
++#define HRCWH_TSEC1M_IN_TBI		0x0000C000
++#define HRCWH_TSEC2M_IN_RGMII		0x00000000
++#define HRCWH_TSEC2M_IN_RTBI		0x00001000
++#define HRCWH_TSEC2M_IN_GMII		0x00002000
++#define HRCWH_TSEC2M_IN_TBI		0x00003000
+ #endif
+ 
+-#if defined (CONFIG_MPC8360)
+-#define HRCWH_SECONDARY_DDR_DISABLE  0x00000000
+-#define HRCWH_SECONDARY_DDR_ENABLE   0x00000010
++#if defined(CONFIG_MPC8360)
++#define HRCWH_SECONDARY_DDR_DISABLE	0x00000000
++#define HRCWH_SECONDARY_DDR_ENABLE	0x00000010
+ #endif
+ 
+-#define HRCWH_BIG_ENDIAN             0x00000000
+-#define HRCWH_LITTLE_ENDIAN          0x00000008
++#define HRCWH_BIG_ENDIAN		0x00000000
++#define HRCWH_LITTLE_ENDIAN		0x00000008
+ 
+-#define HRCWH_LALE_NORMAL            0x00000000
+-#define HRCWH_LALE_EARLY             0x00000004
++#define HRCWH_LALE_NORMAL		0x00000000
++#define HRCWH_LALE_EARLY		0x00000004
+ 
+-#define HRCWH_LDP_SET                0x00000000
+-#define HRCWH_LDP_CLEAR              0x00000002
++#define HRCWH_LDP_SET			0x00000000
++#define HRCWH_LDP_CLEAR			0x00000002
+ 
+-/*
+- * Hard Reset Configration Word - Low
+- */
+-#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000
+-#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000
+-
+-#define HRCWL_DDR_TO_SCB_CLK_1X1     0x00000000
+-#define HRCWL_DDR_TO_SCB_CLK_2X1     0x40000000
+-
+-#define HRCWL_CSB_TO_CLKIN_16X1      0x00000000
+-#define HRCWL_CSB_TO_CLKIN_1X1       0x01000000
+-#define HRCWL_CSB_TO_CLKIN_2X1       0x02000000
+-#define HRCWL_CSB_TO_CLKIN_3X1       0x03000000
+-#define HRCWL_CSB_TO_CLKIN_4X1       0x04000000
+-#define HRCWL_CSB_TO_CLKIN_5X1       0x05000000
+-#define HRCWL_CSB_TO_CLKIN_6X1       0x06000000
+-#define HRCWL_CSB_TO_CLKIN_7X1       0x07000000
+-#define HRCWL_CSB_TO_CLKIN_8X1       0x08000000
+-#define HRCWL_CSB_TO_CLKIN_9X1       0x09000000
+-#define HRCWL_CSB_TO_CLKIN_10X1      0x0A000000
+-#define HRCWL_CSB_TO_CLKIN_11X1      0x0B000000
+-#define HRCWL_CSB_TO_CLKIN_12X1      0x0C000000
+-#define HRCWL_CSB_TO_CLKIN_13X1      0x0D000000
+-#define HRCWL_CSB_TO_CLKIN_14X1      0x0E000000
+-#define HRCWL_CSB_TO_CLKIN_15X1      0x0F000000
+-
+-#define HRCWL_VCO_BYPASS             0x00000000
+-#define HRCWL_VCO_1X2                0x00000000
+-#define HRCWL_VCO_1X4                0x00200000
+-#define HRCWL_VCO_1X8                0x00400000
+-
+-#define HRCWL_CORE_TO_CSB_BYPASS     0x00000000
+-#define HRCWL_CORE_TO_CSB_1X1        0x00020000
+-#define HRCWL_CORE_TO_CSB_1_5X1      0x00030000
+-#define HRCWL_CORE_TO_CSB_2X1        0x00040000
+-#define HRCWL_CORE_TO_CSB_2_5X1      0x00050000
+-#define HRCWL_CORE_TO_CSB_3X1        0x00060000
+-
+-#if defined (CONFIG_MPC8360)
+-#define HRCWL_CE_PLL_VCO_DIV_4       0x00000000
+-#define HRCWL_CE_PLL_VCO_DIV_8       0x00000040
+-#define HRCWL_CE_PLL_VCO_DIV_2       0x00000080
+-
+-#define HRCWL_CE_PLL_DIV_1X1         0x00000000
+-#define HRCWL_CE_PLL_DIV_2X1         0x00000020
+-
+-#define HRCWL_CE_TO_PLL_1X16_        0x00000000
+-#define HRCWL_CE_TO_PLL_1X2          0x00000002
+-#define HRCWL_CE_TO_PLL_1X3          0x00000003
+-#define HRCWL_CE_TO_PLL_1X4          0x00000004
+-#define HRCWL_CE_TO_PLL_1X5          0x00000005
+-#define HRCWL_CE_TO_PLL_1X6          0x00000006
+-#define HRCWL_CE_TO_PLL_1X7          0x00000007
+-#define HRCWL_CE_TO_PLL_1X8          0x00000008
+-#define HRCWL_CE_TO_PLL_1X9          0x00000009
+-#define HRCWL_CE_TO_PLL_1X10         0x0000000A
+-#define HRCWL_CE_TO_PLL_1X11         0x0000000B
+-#define HRCWL_CE_TO_PLL_1X12         0x0000000C
+-#define HRCWL_CE_TO_PLL_1X13         0x0000000D
+-#define HRCWL_CE_TO_PLL_1X14         0x0000000E
+-#define HRCWL_CE_TO_PLL_1X15         0x0000000F
+-#define HRCWL_CE_TO_PLL_1X16         0x00000010
+-#define HRCWL_CE_TO_PLL_1X17         0x00000011
+-#define HRCWL_CE_TO_PLL_1X18         0x00000012
+-#define HRCWL_CE_TO_PLL_1X19         0x00000013
+-#define HRCWL_CE_TO_PLL_1X20         0x00000014
+-#define HRCWL_CE_TO_PLL_1X21         0x00000015
+-#define HRCWL_CE_TO_PLL_1X22         0x00000016
+-#define HRCWL_CE_TO_PLL_1X23         0x00000017
+-#define HRCWL_CE_TO_PLL_1X24         0x00000018
+-#define HRCWL_CE_TO_PLL_1X25         0x00000019
+-#define HRCWL_CE_TO_PLL_1X26         0x0000001A
+-#define HRCWL_CE_TO_PLL_1X27         0x0000001B
+-#define HRCWL_CE_TO_PLL_1X28         0x0000001C
+-#define HRCWL_CE_TO_PLL_1X29         0x0000001D
+-#define HRCWL_CE_TO_PLL_1X30         0x0000001E
+-#define HRCWL_CE_TO_PLL_1X31         0x0000001F
++/* RSR - Reset Status Register
++ */
++#define RSR_RSTSRC			0xE0000000	/* Reset source */
++#define RSR_RSTSRC_SHIFT		29
++#define RSR_BSF				0x00010000	/* Boot seq. fail */
++#define RSR_BSF_SHIFT			16
++#define RSR_SWSR			0x00002000	/* software soft reset */
++#define RSR_SWSR_SHIFT			13
++#define RSR_SWHR			0x00001000	/* software hard reset */
++#define RSR_SWHR_SHIFT			12
++#define RSR_JHRS			0x00000200	/* jtag hreset */
++#define RSR_JHRS_SHIFT			9
++#define RSR_JSRS			0x00000100	/* jtag sreset status */
++#define RSR_JSRS_SHIFT			8
++#define RSR_CSHR			0x00000010	/* checkstop reset status */
++#define RSR_CSHR_SHIFT			4
++#define RSR_SWRS			0x00000008	/* software watchdog reset status */
++#define RSR_SWRS_SHIFT			3
++#define RSR_BMRS			0x00000004	/* bus monitop reset status */
++#define RSR_BMRS_SHIFT			2
++#define RSR_SRS				0x00000002	/* soft reset status */
++#define RSR_SRS_SHIFT			1
++#define RSR_HRS				0x00000001	/* hard reset status */
++#define RSR_HRS_SHIFT			0
++#define RSR_RES				~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR |\
++					 RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
++					 RSR_BMRS | RSR_SRS | RSR_HRS)
++/* RMR - Reset Mode Register
++ */
++#define RMR_CSRE			0x00000001	/* checkstop reset enable */
++#define RMR_CSRE_SHIFT			0
++#define RMR_RES				~(RMR_CSRE)
++
++/* RCR - Reset Control Register
++ */
++#define RCR_SWHR			0x00000002	/* software hard reset */
++#define RCR_SWSR			0x00000001	/* software soft reset */
++#define RCR_RES				~(RCR_SWHR | RCR_SWSR)
++
++/* RCER - Reset Control Enable Register
++ */
++#define RCER_CRE			0x00000001	/* software hard reset */
++#define RCER_RES			~(RCER_CRE)
++
++/* SPMR - System PLL Mode Register
++ */
++#define SPMR_LBIUCM			0x80000000
++#define SPMR_DDRCM			0x40000000
++#define SPMR_SPMF			0x0F000000
++#define SPMR_CKID			0x00800000
++#define SPMR_CKID_SHIFT			23
++#define SPMR_COREPLL			0x007F0000
++#define SPMR_CEVCOD			0x000000C0
++#define SPMR_CEPDF			0x00000020
++#define SPMR_CEPMF			0x0000001F
++
++/* OCCR - Output Clock Control Register
++ */
++#define OCCR_PCICOE0			0x80000000
++#define OCCR_PCICOE1			0x40000000
++#define OCCR_PCICOE2			0x20000000
++#define OCCR_PCICOE3			0x10000000
++#define OCCR_PCICOE4			0x08000000
++#define OCCR_PCICOE5			0x04000000
++#define OCCR_PCICOE6			0x02000000
++#define OCCR_PCICOE7			0x01000000
++#define OCCR_PCICD0			0x00800000
++#define OCCR_PCICD1			0x00400000
++#define OCCR_PCICD2			0x00200000
++#define OCCR_PCICD3			0x00100000
++#define OCCR_PCICD4			0x00080000
++#define OCCR_PCICD5			0x00040000
++#define OCCR_PCICD6			0x00020000
++#define OCCR_PCICD7			0x00010000
++#define OCCR_PCI1CR			0x00000002
++#define OCCR_PCI2CR			0x00000001
++#define OCCR_PCICR			OCCR_PCI1CR
++
++/* SCCR - System Clock Control Register
++ */
++#define SCCR_ENCCM			0x03000000
++#define SCCR_ENCCM_SHIFT		24
++#define SCCR_ENCCM_0			0x00000000
++#define SCCR_ENCCM_1			0x01000000
++#define SCCR_ENCCM_2			0x02000000
++#define SCCR_ENCCM_3			0x03000000
++
++#define SCCR_PCICM			0x00010000
++#define SCCR_PCICM_SHIFT		16
++
++/* SCCR bits - MPC8349 specific */
++#define SCCR_TSEC1CM			0xc0000000
++#define SCCR_TSEC1CM_SHIFT		30
++#define SCCR_TSEC1CM_0			0x00000000
++#define SCCR_TSEC1CM_1			0x40000000
++#define SCCR_TSEC1CM_2			0x80000000
++#define SCCR_TSEC1CM_3			0xC0000000
++
++#define SCCR_TSEC2CM			0x30000000
++#define SCCR_TSEC2CM_SHIFT		28
++#define SCCR_TSEC2CM_0			0x00000000
++#define SCCR_TSEC2CM_1			0x10000000
++#define SCCR_TSEC2CM_2			0x20000000
++#define SCCR_TSEC2CM_3			0x30000000
++
++#define SCCR_USBMPHCM			0x00c00000
++#define SCCR_USBMPHCM_SHIFT		22
++#define SCCR_USBDRCM			0x00300000
++#define SCCR_USBDRCM_SHIFT		20
++
++#define SCCR_USBCM_0			0x00000000
++#define SCCR_USBCM_1			0x00500000
++#define SCCR_USBCM_2			0x00A00000
++#define SCCR_USBCM_3			0x00F00000
++
++#define SCCR_CLK_MASK			( SCCR_TSEC1CM_3	\
++					| SCCR_TSEC2CM_3	\
++					| SCCR_ENCCM_3		\
++					| SCCR_USBCM_3		)
++
++#define SCCR_DEFAULT			0xFFFFFFFF
++
++/* CSn_BDNS - Chip Select memory Bounds Register
++ */
++#define CSBNDS_SA			0x00FF0000
++#define CSBNDS_SA_SHIFT			8
++#define CSBNDS_EA			0x000000FF
++#define CSBNDS_EA_SHIFT			24
++
++/* CSn_CONFIG - Chip Select Configuration Register
++ */
++#define CSCONFIG_EN			0x80000000
++#define CSCONFIG_AP			0x00800000
++#define CSCONFIG_ROW_BIT		0x00000700
++#define CSCONFIG_ROW_BIT_12		0x00000000
++#define CSCONFIG_ROW_BIT_13		0x00000100
++#define CSCONFIG_ROW_BIT_14		0x00000200
++#define CSCONFIG_COL_BIT		0x00000007
++#define CSCONFIG_COL_BIT_8		0x00000000
++#define CSCONFIG_COL_BIT_9		0x00000001
++#define CSCONFIG_COL_BIT_10		0x00000002
++#define CSCONFIG_COL_BIT_11		0x00000003
++
++/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
++ */
++#define TIMING_CFG1_PRETOACT		0x70000000
++#define TIMING_CFG1_PRETOACT_SHIFT	28
++#define TIMING_CFG1_ACTTOPRE		0x0F000000
++#define TIMING_CFG1_ACTTOPRE_SHIFT	24
++#define TIMING_CFG1_ACTTORW		0x00700000
++#define TIMING_CFG1_ACTTORW_SHIFT	20
++#define TIMING_CFG1_CASLAT		0x00070000
++#define TIMING_CFG1_CASLAT_SHIFT	16
++#define TIMING_CFG1_REFREC		0x0000F000
++#define TIMING_CFG1_REFREC_SHIFT	12
++#define TIMING_CFG1_WRREC		0x00000700
++#define TIMING_CFG1_WRREC_SHIFT		8
++#define TIMING_CFG1_ACTTOACT		0x00000070
++#define TIMING_CFG1_ACTTOACT_SHIFT	4
++#define TIMING_CFG1_WRTORD		0x00000007
++#define TIMING_CFG1_WRTORD_SHIFT	0
++#define TIMING_CFG1_CASLAT_20		0x00030000	/* CAS latency = 2.0 */
++#define TIMING_CFG1_CASLAT_25		0x00040000	/* CAS latency = 2.5 */
++
++/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
++ */
++#define TIMING_CFG2_CPO			0x0F000000
++#define TIMING_CFG2_CPO_SHIFT		24
++#define TIMING_CFG2_ACSM		0x00080000
++#define TIMING_CFG2_WR_DATA_DELAY	0x00001C00
++#define TIMING_CFG2_WR_DATA_DELAY_SHIFT	10
++#define TIMING_CFG2_CPO_DEF		0x00000000	/* default (= CASLAT + 1) */
++
++/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
++ */
++#define SDRAM_CFG_MEM_EN		0x80000000
++#define SDRAM_CFG_SREN			0x40000000
++#define SDRAM_CFG_ECC_EN		0x20000000
++#define SDRAM_CFG_RD_EN			0x10000000
++#define SDRAM_CFG_SDRAM_TYPE		0x03000000
++#define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
++#define SDRAM_CFG_DYN_PWR		0x00200000
++#define SDRAM_CFG_32_BE			0x00080000
++#define SDRAM_CFG_8_BE			0x00040000
++#define SDRAM_CFG_NCAP			0x00020000
++#define SDRAM_CFG_2T_EN			0x00008000
++#define SDRAM_CFG_SDRAM_TYPE_DDR	0x02000000
++
++/* DDR_SDRAM_MODE - DDR SDRAM Mode Register
++ */
++#define SDRAM_MODE_ESD			0xFFFF0000
++#define SDRAM_MODE_ESD_SHIFT		16
++#define SDRAM_MODE_SD			0x0000FFFF
++#define SDRAM_MODE_SD_SHIFT		0
++#define DDR_MODE_EXT_MODEREG		0x4000		/* select extended mode reg */
++#define DDR_MODE_EXT_OPMODE		0x3FF8		/* operating mode, mask */
++#define DDR_MODE_EXT_OP_NORMAL		0x0000		/* normal operation */
++#define DDR_MODE_QFC			0x0004		/* QFC / compatibility, mask */
++#define DDR_MODE_QFC_COMP		0x0000		/* compatible to older SDRAMs */
++#define DDR_MODE_WEAK			0x0002		/* weak drivers */
++#define DDR_MODE_DLL_DIS		0x0001		/* disable DLL */
++#define DDR_MODE_CASLAT			0x0070		/* CAS latency, mask */
++#define DDR_MODE_CASLAT_15		0x0010		/* CAS latency 1.5 */
++#define DDR_MODE_CASLAT_20		0x0020		/* CAS latency 2 */
++#define DDR_MODE_CASLAT_25		0x0060		/* CAS latency 2.5 */
++#define DDR_MODE_CASLAT_30		0x0030		/* CAS latency 3 */
++#define DDR_MODE_BTYPE_SEQ		0x0000		/* sequential burst */
++#define DDR_MODE_BTYPE_ILVD		0x0008		/* interleaved burst */
++#define DDR_MODE_BLEN_2			0x0001		/* burst length 2 */
++#define DDR_MODE_BLEN_4			0x0002		/* burst length 4 */
++#define DDR_REFINT_166MHZ_7US		1302		/* exact value for 7.8125us */
++#define DDR_BSTOPRE			256		/* use 256 cycles as a starting point */
++#define DDR_MODE_MODEREG		0x0000		/* select mode register */
++
++/* DDR_SDRAM_INTERVAL - DDR SDRAM Interval Register
++ */
++#define SDRAM_INTERVAL_REFINT		0x3FFF0000
++#define SDRAM_INTERVAL_REFINT_SHIFT	16
++#define SDRAM_INTERVAL_BSTOPRE		0x00003FFF
++#define SDRAM_INTERVAL_BSTOPRE_SHIFT	0
++
++/* DDR_SDRAM_CLK_CNTL - DDR SDRAM Clock Control Register
++ */
++#define DDR_SDRAM_CLK_CNTL_SS_EN		0x80000000
++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025	0x01000000
++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05	0x02000000
++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075	0x03000000
++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1		0x04000000
++
++/* ECC_ERR_INJECT - Memory data path error injection mask ECC
++ */
++#define ECC_ERR_INJECT_EMB		(0x80000000>>22)	/* ECC Mirror Byte */
++#define ECC_ERR_INJECT_EIEN		(0x80000000>>23)	/* Error Injection Enable */
++#define ECC_ERR_INJECT_EEIM		(0xff000000>>24)	/* ECC Erroe Injection Enable */
++#define ECC_ERR_INJECT_EEIM_SHIFT	0
++
++/* CAPTURE_ECC - Memory data path read capture ECC
++ */
++#define CAPTURE_ECC_ECE			(0xff000000>>24)
++#define CAPTURE_ECC_ECE_SHIFT		0
++
++/* ERR_DETECT - Memory error detect
++ */
++#define ECC_ERROR_DETECT_MME		(0x80000000>>0)		/* Multiple Memory Errors */
++#define ECC_ERROR_DETECT_MBE		(0x80000000>>28)	/* Multiple-Bit Error */
++#define ECC_ERROR_DETECT_SBE		(0x80000000>>29)	/* Single-Bit ECC Error Pickup */
++#define ECC_ERROR_DETECT_MSE		(0x80000000>>31)	/* Memory Select Error */
++
++/* ERR_DISABLE - Memory error disable
++ */
++#define ECC_ERROR_DISABLE_MBED		(0x80000000>>28)	/* Multiple-Bit ECC Error Disable */
++#define ECC_ERROR_DISABLE_SBED		(0x80000000>>29)	/* Sinle-Bit ECC Error disable */
++#define ECC_ERROR_DISABLE_MSED		(0x80000000>>31)	/* Memory Select Error Disable */
++#define ECC_ERROR_ENABLE		~(ECC_ERROR_DISABLE_MSED | ECC_ERROR_DISABLE_SBED |\
++					 ECC_ERROR_DISABLE_MBED)
++/* ERR_INT_EN - Memory error interrupt enable
++ */
++#define ECC_ERR_INT_EN_MBEE		(0x80000000>>28)	/* Multiple-Bit ECC Error Interrupt Enable */
++#define ECC_ERR_INT_EN_SBEE		(0x80000000>>29)	/* Single-Bit ECC Error Interrupt Enable */
++#define ECC_ERR_INT_EN_MSEE		(0x80000000>>31)	/* Memory Select Error Interrupt Enable */
++#define ECC_ERR_INT_DISABLE		~(ECC_ERR_INT_EN_MBEE | ECC_ERR_INT_EN_SBEE |\
++					 ECC_ERR_INT_EN_MSEE)
++/* CAPTURE_ATTRIBUTES - Memory error attributes capture
++ */
++#define ECC_CAPT_ATTR_BNUM		(0xe0000000>>1)		/* Data Beat Num */
++#define ECC_CAPT_ATTR_BNUM_SHIFT	28
++#define ECC_CAPT_ATTR_TSIZ		(0xc0000000>>6)		/* Transaction Size */
++#define ECC_CAPT_ATTR_TSIZ_FOUR_DW	0
++#define ECC_CAPT_ATTR_TSIZ_ONE_DW	1
++#define ECC_CAPT_ATTR_TSIZ_TWO_DW	2
++#define ECC_CAPT_ATTR_TSIZ_THREE_DW	3
++#define ECC_CAPT_ATTR_TSIZ_SHIFT	24
++#define ECC_CAPT_ATTR_TSRC		(0xf8000000>>11)	/* Transaction Source */
++#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT	0x0
++#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF	0x2
++#define ECC_CAPT_ATTR_TSRC_TSEC1	0x4
++#define ECC_CAPT_ATTR_TSRC_TSEC2	0x5
++#define ECC_CAPT_ATTR_TSRC_USB		(0x06|0x07)
++#define ECC_CAPT_ATTR_TSRC_ENCRYPT	0x8
++#define ECC_CAPT_ATTR_TSRC_I2C		0x9
++#define ECC_CAPT_ATTR_TSRC_JTAG		0xA
++#define ECC_CAPT_ATTR_TSRC_PCI1		0xD
++#define ECC_CAPT_ATTR_TSRC_PCI2		0xE
++#define ECC_CAPT_ATTR_TSRC_DMA		0xF
++#define ECC_CAPT_ATTR_TSRC_SHIFT	16
++#define ECC_CAPT_ATTR_TTYP		(0xe0000000>>18)	/* Transaction Type */
++#define ECC_CAPT_ATTR_TTYP_WRITE	0x1
++#define ECC_CAPT_ATTR_TTYP_READ		0x2
++#define ECC_CAPT_ATTR_TTYP_R_M_W	0x3
++#define ECC_CAPT_ATTR_TTYP_SHIFT	12
++#define ECC_CAPT_ATTR_VLD		(0x80000000>>31)	/* Valid */
++
++/* ERR_SBE - Single bit ECC memory error management
++ */
++#define ECC_ERROR_MAN_SBET		(0xff000000>>8)		/* Single-Bit Error Threshold 0..255 */
++#define ECC_ERROR_MAN_SBET_SHIFT	16
++#define ECC_ERROR_MAN_SBEC		(0xff000000>>24)	/* Single Bit Error Counter 0..255 */
++#define ECC_ERROR_MAN_SBEC_SHIFT	0
++
++/* BR - Base Registers
++ */
++#define BR0				0x5000		/* Register offset to immr */
++#define BR1				0x5008
++#define BR2				0x5010
++#define BR3				0x5018
++#define BR4				0x5020
++#define BR5				0x5028
++#define BR6				0x5030
++#define BR7				0x5038
++
++#define BR_BA				0xFFFF8000
++#define BR_BA_SHIFT			15
++#define BR_PS				0x00001800
++#define BR_PS_SHIFT			11
++#define BR_PS_8				0x00000800	/* Port Size 8 bit */
++#define BR_PS_16			0x00001000	/* Port Size 16 bit */
++#define BR_PS_32			0x00001800	/* Port Size 32 bit */
++#define BR_DECC				0x00000600
++#define BR_DECC_SHIFT			9
++#define BR_WP				0x00000100
++#define BR_WP_SHIFT			8
++#define BR_MSEL				0x000000E0
++#define BR_MSEL_SHIFT			5
++#define BR_MS_GPCM			0x00000000	/* GPCM */
++#define BR_MS_SDRAM			0x00000060	/* SDRAM */
++#define BR_MS_UPMA			0x00000080	/* UPMA */
++#define BR_MS_UPMB			0x000000A0	/* UPMB */
++#define BR_MS_UPMC			0x000000C0	/* UPMC */
++#if defined(CONFIG_MPC8360)
++#define BR_ATOM				0x0000000C
++#define BR_ATOM_SHIFT			2
+ #endif
++#define BR_V				0x00000001
++#define BR_V_SHIFT			0
+ 
+-/*
+- * LCRR - Clock Ratio Register (10.3.1.16)
+- */
+-#define LCRR_DBYP      0x80000000
+-#define LCRR_DBYP_SHIFT        31
+-#define LCRR_BUFCMDC   0x30000000
+-#define LCRR_BUFCMDC_1 0x10000000
+-#define LCRR_BUFCMDC_2 0x20000000
+-#define LCRR_BUFCMDC_3 0x30000000
+-#define LCRR_BUFCMDC_4 0x00000000
+-#define LCRR_BUFCMDC_SHIFT     28
+-#define LCRR_ECL       0x03000000
+-#define LCRR_ECL_4     0x00000000
+-#define LCRR_ECL_5     0x01000000
+-#define LCRR_ECL_6     0x02000000
+-#define LCRR_ECL_7     0x03000000
+-#define LCRR_ECL_SHIFT         24
+-#define LCRR_EADC      0x00030000
+-#define LCRR_EADC_1    0x00010000
+-#define LCRR_EADC_2    0x00020000
+-#define LCRR_EADC_3    0x00030000
+-#define LCRR_EADC_4    0x00000000
+-#define LCRR_EADC_SHIFT        16
+-#define LCRR_CLKDIV    0x0000000F
+-#define LCRR_CLKDIV_2  0x00000002
+-#define LCRR_CLKDIV_4  0x00000004
+-#define LCRR_CLKDIV_8  0x00000008
+-#define LCRR_CLKDIV_SHIFT       0
++#if defined(CONFIG_MPC8349)
++#define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
++#elif defined(CONFIG_MPC8360)
++#define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
++#endif
+ 
+-/*
+- * SCCR-System Clock Control Register
+- */
+-#define SCCR_TSEC1CM_0	0x00000000
+-#define SCCR_TSEC1CM_1	0x40000000
+-#define SCCR_TSEC1CM_2	0x80000000
+-#define SCCR_TSEC1CM_3	0xC0000000
+-#define SCCR_TSEC2CM_0	0x00000000
+-#define SCCR_TSEC2CM_1	0x10000000
+-#define SCCR_TSEC2CM_2	0x20000000
+-#define SCCR_TSEC2CM_3	0x30000000
+-#define SCCR_ENCCM_0	0x00000000
+-#define SCCR_ENCCM_1	0x01000000
+-#define SCCR_ENCCM_2	0x02000000
+-#define SCCR_ENCCM_3	0x03000000
+-#define SCCR_USBCM_0	0x00000000
+-#define SCCR_USBCM_1	0x00500000
+-#define SCCR_USBCM_2	0x00A00000
+-#define SCCR_USBCM_3	0x00F00000
+-
+-#define SCCR_CLK_MASK	( SCCR_TSEC1CM_3	\
+-			| SCCR_TSEC2CM_3	\
+-			| SCCR_ENCCM_3		\
+-			| SCCR_USBCM_3		)
+-
+-#define SCCR_DEFAULT	0xFFFFFFFF
++/* OR - Option Registers
++ */
++#define OR0				0x5004		/* Register offset to immr */
++#define OR1				0x500C
++#define OR2				0x5014
++#define OR3				0x501C
++#define OR4				0x5024
++#define OR5				0x502C
++#define OR6				0x5034
++#define OR7				0x503C
++
++#define OR_GPCM_AM			0xFFFF8000
++#define OR_GPCM_AM_SHIFT		15
++#define OR_GPCM_BCTLD			0x00001000
++#define OR_GPCM_BCTLD_SHIFT		12
++#define OR_GPCM_CSNT			0x00000800
++#define OR_GPCM_CSNT_SHIFT		11
++#define OR_GPCM_ACS			0x00000600
++#define OR_GPCM_ACS_SHIFT		9
++#define OR_GPCM_ACS_0b10		0x00000400
++#define OR_GPCM_ACS_0b11		0x00000600
++#define OR_GPCM_XACS			0x00000100
++#define OR_GPCM_XACS_SHIFT		8
++#define OR_GPCM_SCY			0x000000F0
++#define OR_GPCM_SCY_SHIFT		4
++#define OR_GPCM_SCY_1			0x00000010
++#define OR_GPCM_SCY_2			0x00000020
++#define OR_GPCM_SCY_3			0x00000030
++#define OR_GPCM_SCY_4			0x00000040
++#define OR_GPCM_SCY_5			0x00000050
++#define OR_GPCM_SCY_6			0x00000060
++#define OR_GPCM_SCY_7			0x00000070
++#define OR_GPCM_SCY_8			0x00000080
++#define OR_GPCM_SCY_9			0x00000090
++#define OR_GPCM_SCY_10			0x000000a0
++#define OR_GPCM_SCY_11			0x000000b0
++#define OR_GPCM_SCY_12			0x000000c0
++#define OR_GPCM_SCY_13			0x000000d0
++#define OR_GPCM_SCY_14			0x000000e0
++#define OR_GPCM_SCY_15			0x000000f0
++#define OR_GPCM_SETA			0x00000008
++#define OR_GPCM_SETA_SHIFT		3
++#define OR_GPCM_TRLX			0x00000004
++#define OR_GPCM_TRLX_SHIFT		2
++#define OR_GPCM_EHTR			0x00000002
++#define OR_GPCM_EHTR_SHIFT		1
++#define OR_GPCM_EAD			0x00000001
++#define OR_GPCM_EAD_SHIFT		0
++
++#define OR_UPM_AM			0xFFFF8000
++#define OR_UPM_AM_SHIFT			15
++#define OR_UPM_XAM			0x00006000
++#define OR_UPM_XAM_SHIFT		13
++#define OR_UPM_BCTLD			0x00001000
++#define OR_UPM_BCTLD_SHIFT		12
++#define OR_UPM_BI			0x00000100
++#define OR_UPM_BI_SHIFT			8
++#define OR_UPM_TRLX			0x00000004
++#define OR_UPM_TRLX_SHIFT		2
++#define OR_UPM_EHTR			0x00000002
++#define OR_UPM_EHTR_SHIFT		1
++#define OR_UPM_EAD			0x00000001
++#define OR_UPM_EAD_SHIFT		0
++
++#define OR_SDRAM_AM			0xFFFF8000
++#define OR_SDRAM_AM_SHIFT		15
++#define OR_SDRAM_XAM			0x00006000
++#define OR_SDRAM_XAM_SHIFT		13
++#define OR_SDRAM_COLS			0x00001C00
++#define OR_SDRAM_COLS_SHIFT		10
++#define OR_SDRAM_ROWS			0x000001C0
++#define OR_SDRAM_ROWS_SHIFT		6
++#define OR_SDRAM_PMSEL			0x00000020
++#define OR_SDRAM_PMSEL_SHIFT		5
++#define OR_SDRAM_EAD			0x00000001
++#define OR_SDRAM_EAD_SHIFT		0
++
++/* LBCR - Local Bus Configuration Register
++ */
++#define LBCR_LDIS			0x80000000
++#define LBCR_LDIS_SHIFT			31
++#define LBCR_BCTLC			0x00C00000
++#define LBCR_BCTLC_SHIFT		22
++#define LBCR_LPBSE			0x00020000
++#define LBCR_LPBSE_SHIFT		17
++#define LBCR_EPAR			0x00010000
++#define LBCR_EPAR_SHIFT			16
++#define LBCR_BMT			0x0000FF00
++#define LBCR_BMT_SHIFT			8
++
++/* LCRR - Clock Ratio Register
++ */
++#define LCRR_DBYP			0x80000000
++#define LCRR_DBYP_SHIFT			31
++#define LCRR_BUFCMDC			0x30000000
++#define LCRR_BUFCMDC_SHIFT		28
++#define LCRR_BUFCMDC_1			0x10000000
++#define LCRR_BUFCMDC_2			0x20000000
++#define LCRR_BUFCMDC_3			0x30000000
++#define LCRR_BUFCMDC_4			0x00000000
++#define LCRR_ECL			0x03000000
++#define LCRR_ECL_SHIFT			24
++#define LCRR_ECL_4			0x00000000
++#define LCRR_ECL_5			0x01000000
++#define LCRR_ECL_6			0x02000000
++#define LCRR_ECL_7			0x03000000
++#define LCRR_EADC			0x00030000
++#define LCRR_EADC_SHIFT			16
++#define LCRR_EADC_1			0x00010000
++#define LCRR_EADC_2			0x00020000
++#define LCRR_EADC_3			0x00030000
++#define LCRR_EADC_4			0x00000000
++#define LCRR_CLKDIV			0x0000000F
++#define LCRR_CLKDIV_SHIFT		0
++#define LCRR_CLKDIV_2			0x00000002
++#define LCRR_CLKDIV_4			0x00000004
++#define LCRR_CLKDIV_8			0x00000008
++
++/* DMAMR - DMA Mode Register
++ */
++#define DMA_CHANNEL_START			0x00000001	/* Bit - DMAMRn CS */
++#define DMA_CHANNEL_TRANSFER_MODE_DIRECT	0x00000004	/* Bit - DMAMRn CTM */
++#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN	0x00001000	/* Bit - DMAMRn SAHE */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B	0x00000000	/* 2Bit- DMAMRn SAHTS 1byte */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B	0x00004000	/* 2Bit- DMAMRn SAHTS 2bytes */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B	0x00008000	/* 2Bit- DMAMRn SAHTS 4bytes */
++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B	0x0000c000	/* 2Bit- DMAMRn SAHTS 8bytes */
++#define DMA_CHANNEL_SNOOP			0x00010000	/* Bit - DMAMRn DMSEN */
++
++/* DMASR - DMA Status Register
++ */
++#define DMA_CHANNEL_BUSY			0x00000004	/* Bit - DMASRn CB */
++#define DMA_CHANNEL_TRANSFER_ERROR		0x00000080	/* Bit - DMASRn TE */
++
++/* CONFIG_ADDRESS - PCI Config Address Register
++ */
++#define PCI_CONFIG_ADDRESS_EN		0x80000000
++#define PCI_CONFIG_ADDRESS_BN_SHIFT	16
++#define PCI_CONFIG_ADDRESS_BN_MASK	0x00ff0000
++#define PCI_CONFIG_ADDRESS_DN_SHIFT	11
++#define PCI_CONFIG_ADDRESS_DN_MASK	0x0000f800
++#define PCI_CONFIG_ADDRESS_FN_SHIFT	8
++#define PCI_CONFIG_ADDRESS_FN_MASK	0x00000700
++#define PCI_CONFIG_ADDRESS_RN_SHIFT	0
++#define PCI_CONFIG_ADDRESS_RN_MASK	0x000000fc
++
++/* POTAR - PCI Outbound Translation Address Register
++ */
++#define POTAR_TA_MASK			0x000fffff
++
++/* POBAR - PCI Outbound Base Address Register
++ */
++#define POBAR_BA_MASK			0x000fffff
++
++/* POCMR - PCI Outbound Comparision Mask Register
++ */
++#define POCMR_EN			0x80000000
++#define POCMR_IO			0x40000000	/* 0-memory space 1-I/O space */
++#define POCMR_SE			0x20000000	/* streaming enable */
++#define POCMR_DST			0x10000000	/* 0-PCI1 1-PCI2 */
++#define POCMR_CM_MASK			0x000fffff
++#define POCMR_CM_4G			0x00000000
++#define POCMR_CM_2G			0x00080000
++#define POCMR_CM_1G			0x000C0000
++#define POCMR_CM_512M			0x000E0000
++#define POCMR_CM_256M			0x000F0000
++#define POCMR_CM_128M			0x000F8000
++#define POCMR_CM_64M			0x000FC000
++#define POCMR_CM_32M			0x000FE000
++#define POCMR_CM_16M			0x000FF000
++#define POCMR_CM_8M			0x000FF800
++#define POCMR_CM_4M			0x000FFC00
++#define POCMR_CM_2M			0x000FFE00
++#define POCMR_CM_1M			0x000FFF00
++#define POCMR_CM_512K			0x000FFF80
++#define POCMR_CM_256K			0x000FFFC0
++#define POCMR_CM_128K			0x000FFFE0
++#define POCMR_CM_64K			0x000FFFF0
++#define POCMR_CM_32K			0x000FFFF8
++#define POCMR_CM_16K			0x000FFFFC
++#define POCMR_CM_8K			0x000FFFFE
++#define POCMR_CM_4K			0x000FFFFF
++
++/* PITAR - PCI Inbound Translation Address Register
++ */
++#define PITAR_TA_MASK			0x000fffff
++
++/* PIBAR - PCI Inbound Base/Extended Address Register
++ */
++#define PIBAR_MASK			0xffffffff
++#define PIEBAR_EBA_MASK			0x000fffff
++
++/* PIWAR - PCI Inbound Windows Attributes Register
++ */
++#define PIWAR_EN			0x80000000
++#define PIWAR_PF			0x20000000
++#define PIWAR_RTT_MASK			0x000f0000
++#define PIWAR_RTT_NO_SNOOP		0x00040000
++#define PIWAR_RTT_SNOOP			0x00050000
++#define PIWAR_WTT_MASK			0x0000f000
++#define PIWAR_WTT_NO_SNOOP		0x00004000
++#define PIWAR_WTT_SNOOP			0x00005000
++#define PIWAR_IWS_MASK			0x0000003F
++#define PIWAR_IWS_4K			0x0000000B
++#define PIWAR_IWS_8K			0x0000000C
++#define PIWAR_IWS_16K			0x0000000D
++#define PIWAR_IWS_32K			0x0000000E
++#define PIWAR_IWS_64K			0x0000000F
++#define PIWAR_IWS_128K			0x00000010
++#define PIWAR_IWS_256K			0x00000011
++#define PIWAR_IWS_512K			0x00000012
++#define PIWAR_IWS_1M			0x00000013
++#define PIWAR_IWS_2M			0x00000014
++#define PIWAR_IWS_4M			0x00000015
++#define PIWAR_IWS_8M			0x00000016
++#define PIWAR_IWS_16M			0x00000017
++#define PIWAR_IWS_32M			0x00000018
++#define PIWAR_IWS_64M			0x00000019
++#define PIWAR_IWS_128M			0x0000001A
++#define PIWAR_IWS_256M			0x0000001B
++#define PIWAR_IWS_512M			0x0000001C
++#define PIWAR_IWS_1G			0x0000001D
++#define PIWAR_IWS_2G			0x0000001E
+ 
+ #endif	/* __MPC83XX_H__ */
diff --git a/packages/uboot/u-boot_1.1.6.bb b/packages/uboot/u-boot_1.1.6.bb
index bec1a619e4..e003c69d7b 100644
--- a/packages/uboot/u-boot_1.1.6.bb
+++ b/packages/uboot/u-boot_1.1.6.bb
@@ -1,12 +1,25 @@
 require u-boot.inc
 
-PR = "r2"
+PR = "r3"
 
 SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-1.1.6.tar.bz2 \
-           file://devkit-idp.patch;patch=1"
+           file://devkit-idp.patch;patch=1 \
+"
 
 SRC_URI_append_sarge-at91 = " file://sarge-uboot.patch;patch=1"
 
+SRC_URI_append_mpc8323e-rdb = "  file://u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch;patch=1 \
+                                 file://u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch;patch=1 \
+                                 file://u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch;patch=1 \
+                                 file://u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch;patch=1 \
+                                 file://u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch;patch=1 \
+                                 file://u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch;patch=1 \
+                                 file://u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch;patch=1 \
+                                 file://u-boot-1.1.6-83xx-optimizations.patch;patch=1 \ 
+"
+
+
+
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 UBOOT_MACHINE_sarge-at91 = "sarge_config"