diff options
author | Steve Sakoman <steve@sakoman.com> | 2008-07-13 16:16:50 +0000 |
---|---|---|
committer | Koen Kooi <koen@openembedded.org> | 2008-07-13 16:16:50 +0000 |
commit | 94667ace4424256bfd2e85ef5fe98b434dbbf58d (patch) | |
tree | 6fdb21d7d41359335ca5d59443b3529f17f6aa8a /packages/u-boot | |
parent | a105e4422b3ef7da6cc1716443f392647dd06354 (diff) |
u-boot-git: update beagleboard base patch with nand ecc command, bump SRCREV
Diffstat (limited to 'packages/u-boot')
-rw-r--r-- | packages/u-boot/u-boot-git/beagleboard/base.patch | 97 | ||||
-rw-r--r-- | packages/u-boot/u-boot_git.bb | 4 |
2 files changed, 70 insertions, 31 deletions
diff --git a/packages/u-boot/u-boot-git/beagleboard/base.patch b/packages/u-boot/u-boot-git/beagleboard/base.patch index dedc34398f..d4f726c006 100644 --- a/packages/u-boot/u-boot-git/beagleboard/base.patch +++ b/packages/u-boot/u-boot-git/beagleboard/base.patch @@ -1,5 +1,5 @@ diff --git a/Makefile b/Makefile -index 8bfc891..e9bf61a 100644 +index e557d0d..3eac691 100644 --- a/Makefile +++ b/Makefile @@ -141,7 +141,7 @@ ifeq ($(ARCH),ppc) @@ -11,7 +11,7 @@ index 8bfc891..e9bf61a 100644 endif ifeq ($(ARCH),i386) CROSS_COMPILE = i386-linux- -@@ -252,7 +252,7 @@ LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a +@@ -253,7 +253,7 @@ LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) # Add GCC lib @@ -20,7 +20,7 @@ index 8bfc891..e9bf61a 100644 # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) -@@ -2565,6 +2565,12 @@ SMN42_config : unconfig +@@ -2569,6 +2569,12 @@ SMN42_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 ######################################################################### @@ -1467,10 +1467,10 @@ index 0000000..2f94684 +#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ diff --git a/board/omap3530beagle/omap3530beagle.c b/board/omap3530beagle/omap3530beagle.c new file mode 100644 -index 0000000..0bdfb72 +index 0000000..7d9a566 --- /dev/null +++ b/board/omap3530beagle/omap3530beagle.c -@@ -0,0 +1,390 @@ +@@ -0,0 +1,388 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> @@ -1740,8 +1740,6 @@ index 0000000..0bdfb72 + *((uint *) 0x49058094) = 0x00000506; + *((uint *) 0x49056094) = 0xF060F000; + -+ /* set clksel_tv and clksel_dss1 */ -+ *((uint *) 0x48004E40) = 0x00001002; + return (0); +} + @@ -2323,19 +2321,60 @@ index 0000000..72f15f6 + .bss : { *(.bss) } + _end = .; +} -diff --git a/common/env_nand.c b/common/env_nand.c -index a48e98e..8b04a01 100644 ---- a/common/env_nand.c -+++ b/common/env_nand.c -@@ -231,6 +231,8 @@ int saveenv(void) - size_t total; - int ret = 0; +diff --git a/common/cmd_nand.c b/common/cmd_nand.c +index 9e38bf7..0ae362c 100644 +--- a/common/cmd_nand.c ++++ b/common/cmd_nand.c +@@ -37,6 +37,12 @@ int find_dev_and_part(const char *id, struct mtd_device **dev, + u8 *part_num, struct part_info **part); + #endif -+ nand_erase_options_t nand_erase_options; ++#if defined(CONFIG_OMAP) && (defined(CONFIG_OMAP3_BEAGLE)) ++extern void omap_nand_switch_ecc(nand_info_t *nand, int hardware); ++#else ++#define omap_nand_switch_ecc(x, y) do {} while(0) ++#endif + - nand_erase_options.length = CFG_ENV_RANGE; - nand_erase_options.quiet = 0; - nand_erase_options.jffs2 = 0; + static int nand_dump_oob(nand_info_t *nand, ulong off) + { + return 0; +@@ -222,7 +228,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) + strncmp(cmd, "dump", 4) != 0 && + strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 && + strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 && +- strcmp(cmd, "biterr") != 0 && ++ strcmp(cmd, "biterr") != 0 && strncmp(cmd, "ecc", 3) != 0 && + strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 ) + goto usage; + +@@ -307,6 +313,19 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) + + } + ++ if (strncmp(cmd, "ecc", 3) == 0) { ++ if (argc < 2) ++ goto usage; ++ if (strncmp(argv[2], "hw", 2) == 0) ++ omap_nand_switch_ecc(nand, 1); ++ else if (strncmp(argv[2], "sw", 2) == 0) ++ omap_nand_switch_ecc(nand, 0); ++ else ++ goto usage; ++ ++ return 0; ++ } ++ + /* read write */ + if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) { + int read; +@@ -472,6 +491,7 @@ U_BOOT_CMD(nand, 5, 1, do_nand, + "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" + "nand markbad off - mark bad block at offset (UNSAFE)\n" + "nand biterr off - make a bit error at offset (UNSAFE)\n" ++ "nand ecc [hw/sw] - switch the ecc calculation algorithm \n" + "nand lock [tight] [status] - bring nand to lock state or display locked pages\n" + "nand unlock [offset] [size] - unlock section\n"); + diff --git a/cpu/omap3/Makefile b/cpu/omap3/Makefile new file mode 100644 index 0000000..097447a @@ -4122,10 +4161,10 @@ index 7dab786..7782e9d 100644 udelay(1000); }else diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c -index 7e27ee1..e552e08 100644 +index d1423c1..a75c606 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c -@@ -303,7 +303,9 @@ static inline void *get_node_mem_nor(u32 off) +@@ -304,7 +304,9 @@ static inline void *get_node_mem_nor(u32 off) */ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) { @@ -4135,7 +4174,7 @@ index 7e27ee1..e552e08 100644 #if defined(CONFIG_CMD_FLASH) if (id->type == MTD_DEV_TYPE_NOR) -@@ -321,7 +323,9 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) +@@ -322,7 +324,9 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) static inline void *get_node_mem(u32 off) { @@ -4270,7 +4309,7 @@ index 0000000..7cdd58c +#endif diff --git a/include/asm-arm/arch-omap3/clocks_omap3.h b/include/asm-arm/arch-omap3/clocks_omap3.h new file mode 100644 -index 0000000..9bb4700 +index 0000000..fdb0c4c --- /dev/null +++ b/include/asm-arm/arch-omap3/clocks_omap3.h @@ -0,0 +1,101 @@ @@ -4319,7 +4358,7 @@ index 0000000..9bb4700 +/* PER DPLL */ +# define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */ +# define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */ -+# define PER_M4X2 9 /* 96MHz : CM_CLKSEL_DSS-dss1 */ ++# define PER_M4X2 2 /* 432MHz : CM_CLKSEL_DSS-dss1 */ +# define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */ + +# define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0a50)) @@ -5406,7 +5445,7 @@ index 0000000..37aaa08 +#endif /* MMC_HOST_DEF_H */ diff --git a/include/asm-arm/arch-omap3/mux.h b/include/asm-arm/arch-omap3/mux.h new file mode 100644 -index 0000000..33947b9 +index 0000000..ec4aeb0 --- /dev/null +++ b/include/asm-arm/arch-omap3/mux.h @@ -0,0 +1,757 @@ @@ -6046,8 +6085,8 @@ index 0000000..33947b9 + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ -+ MUX_VAL(CP(I2C2_SCL), (IDIS | PTU | DIS | M4)) /*GPIO_168*/\ -+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ ++ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ ++ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ @@ -6376,7 +6415,7 @@ index 0000000..271b554 +#endif diff --git a/include/configs/omap3530beagle.h b/include/configs/omap3530beagle.h new file mode 100644 -index 0000000..fd21ab3 +index 0000000..20efbf3 --- /dev/null +++ b/include/configs/omap3530beagle.h @@ -0,0 +1,292 @@ @@ -6532,9 +6571,9 @@ index 0000000..fd21ab3 +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + -+#define CONFIG_BOOTCOMMAND "mmcinit;fatload mmc 0 0x80300000 uImage; fatload mmc 0 0x81600000 rd-ext2.bin; bootm 0x80300000\0" ++#define CONFIG_BOOTCOMMAND "nand read 80200000 280000 400000 ; bootm 80200000" + -+#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 ramdisk_size=3072 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,3M " ++#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 noinitrd root=/dev/mtdblock4 rw rootfstype=jffs2" + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 diff --git a/packages/u-boot/u-boot_git.bb b/packages/u-boot/u-boot_git.bb index e900ab41db..81842921cc 100644 --- a/packages/u-boot/u-boot_git.bb +++ b/packages/u-boot/u-boot_git.bb @@ -1,8 +1,8 @@ require u-boot.inc -PR="r9" +PR="r10" SRCREV_davinci-sffsdr = "a524e112b424c6843800ea2f19d3a8cf01d0aa94" -SRCREV_beagleboard = "9b55a2536919f4de1bb1044e6eb8262c2f53bc96" +SRCREV_beagleboard = "bde63587622c4b830a27d1ddf7265843de9e994f" SRCREV_neuros-osd2 = "482dfe48845192c7f810bccfc93db93d0f1654f7" SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git " |