merge of '2df98cb93e1c3ab67c675e3f11ef036ea57dd19b'

     and 'ba9a800ebd8fd6f90db1e022cd9a342c69339bc2'

6 files changed, 0 insertions, 5252 deletions

diff --git a/packages/u-boot/u-boot-git/akita/.mtn2git_empty b/packages/u-boot/u-boot-git/akita/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/u-boot/u-boot-git/akita/.mtn2git_empty
+++ /dev/null
diff --git a/packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch b/packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch
deleted file mode 100644
index 9d65de8daa..0000000000
--- a/packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch
+++ /dev/null
@@ -1,112 +0,0 @@
---- git/include/configs/akita.h	2007-12-26 17:57:00.000000000 +0000
-+++ git/include/configs/akita.h	2007-12-26 18:07:47.000000000 +0000
-@@ -81,35 +81,35 @@
- 	"if testkey 101 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x00060000 0x00540000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home); " \
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 2 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait fbcon=rotate:1; " 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 18 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; "	 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait fbcon=rotate:1; "	 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 3 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; "	 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait fbcon=rotate:1; "	 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"nand read.logical 0xa1000000 0x005a0000 0x00160000; "								\
--	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " 	\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home); " \
- 	"bootm; "
- #else
- #define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
- #endif
- 
--#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home)"
- #define CONFIG_SETUP_MEMORY_TAGS 1
- #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
- #define CONFIG_INITRD_TAG	 1
-@@ -302,9 +302,9 @@
- /* Note: fake mtd_id used, no linux mtd map file */
- 
- #define CONFIG_JFFS2_CMDLINE
--#define MTDIDS_DEFAULT		"nand0=laze-0"
-+#define MTDIDS_DEFAULT		"nand0=sharpsl-nand"
- //#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
--#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home)"
- 
- /*
-  * SHARP SL NAND logical partition
---- git/include/configs/akita.h	2007-12-26 17:57:00.000000000 +0000
-+++ git/include/configs/akita.h	2007-12-26 18:07:47.000000000 +0000
-@@ -81,35 +81,35 @@
- 	"if testkey 101 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x00060000 0x00540000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " \
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 2 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait fbcon=rotate:1; " 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 18 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; "	 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait fbcon=rotate:1; "	 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 3 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; "	 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait fbcon=rotate:1; "	 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"nand read.logical 0xa1000000 0x005a0000 0x00160000; "								\
--	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " 	\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " \
- 	"bootm; "
- #else
- #define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
- #endif
- 
--#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)"
- #define CONFIG_SETUP_MEMORY_TAGS 1
- #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
- #define CONFIG_INITRD_TAG	 1
-@@ -302,9 +302,9 @@
- /* Note: fake mtd_id used, no linux mtd map file */
- 
- #define CONFIG_JFFS2_CMDLINE
--#define MTDIDS_DEFAULT		"nand0=laze-0"
-+#define MTDIDS_DEFAULT		"nand0=sharpsl-nand"
- //#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
--#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)"
- 
- /*
-  * SHARP SL NAND logical partition
diff --git a/packages/u-boot/u-boot-git/c7x0/.mtn2git_empty b/packages/u-boot/u-boot-git/c7x0/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/u-boot/u-boot-git/c7x0/.mtn2git_empty
+++ /dev/null
diff --git a/packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch b/packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch
deleted file mode 100644
index 205f05b53e..0000000000
--- a/packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch
+++ /dev/null
@@ -1,112 +0,0 @@
---- git/include/configs/corgi.h 2007-12-26 17:57:00.000000000 +0000
-+++ git/include/configs/corgi.h	2007-12-26 18:07:47.000000000 +0000
-@@ -81,35 +81,35 @@
- 	"if testkey 101 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x00060000 0x00540000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home); " 		\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 2 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " 				\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait; " 			\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 18 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; "			 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait; "			 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 3 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; "			 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait; "			 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"nand read.logical 0xa0800000 0x005a0000 0x00160000; "								\
--	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " 			\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home); " 	\
-	"bootm; "
- #else
- #define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
- #endif
- 
--#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home)"
- #define CONFIG_SETUP_MEMORY_TAGS 1
- #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
- #define CONFIG_INITRD_TAG	 1
-@@ -304,9 +304,9 @@
- /* Note: fake mtd_id used, no linux mtd map file */
- 
- #define CONFIG_JFFS2_CMDLINE
--#define MTDIDS_DEFAULT		"nand0=laze-0"
-+#define MTDIDS_DEFAULT		"nand0=sharpsl-nand"
- //#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
--#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home)"
- 
- /*
-  * SHARP SL NAND logical partition
---- git/include/configs/corgi.h 2007-12-26 17:57:00.000000000 +0000
-+++ git/include/configs/corgi.h	2007-12-26 18:07:47.000000000 +0000
-@@ -81,35 +81,35 @@
- 	"if testkey 101 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x00060000 0x00540000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " 		\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 2 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " 				\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait; " 			\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 18 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; "			 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait; "			 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"if testkey 3 ; "												\
- 	"then "														\
- 		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
--		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; "			 		\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait; "			 	\
- 		"bootm; "												\
- 	"fi; "														\
- 	"nand read.logical 0xa0800000 0x005a0000 0x00160000; "								\
--	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " 			\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " 	\
-	"bootm; "
- #else
- #define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
- #endif
- 
--#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)"
- #define CONFIG_SETUP_MEMORY_TAGS 1
- #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
- #define CONFIG_INITRD_TAG	 1
-@@ -304,9 +304,9 @@
- /* Note: fake mtd_id used, no linux mtd map file */
- 
- #define CONFIG_JFFS2_CMDLINE
--#define MTDIDS_DEFAULT		"nand0=laze-0"
-+#define MTDIDS_DEFAULT		"nand0=sharpsl-nand"
- //#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
--#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)"
- 
- /*
-  * SHARP SL NAND logical partition
diff --git a/packages/u-boot/u-boot-git/pdaXrom-u-boot.patch b/packages/u-boot/u-boot-git/pdaXrom-u-boot.patch
deleted file mode 100644
index 9ceadde6dc..0000000000
--- a/packages/u-boot/u-boot-git/pdaXrom-u-boot.patch
+++ /dev/null
@@ -1,4934 +0,0 @@
-diff -Nur u-boot-2006-04-18-1106/CREDITS u-boot-2006-04-18-1106-new/CREDITS
---- u-boot-2006-04-18-1106/CREDITS	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/CREDITS	2006-07-05 11:19:44.000000000 +0000
-@@ -93,6 +93,12 @@
- E: jonathan.debruyne@siemens.atea.be
- D: Port to Siemens IAD210 board
- 
-+N: Alexander Chukov
-+E: sash@pdaXrom.org
-+D: initial support for Sharp Zaurus SL-C1000/3100
-+D: initial support for Sharp Zaurus SL-C7x0/C860
-+W: http://www.pdaXrom.org
-+
- N: Ken Chou
- E: kchou@ieee.org
- D: Support for A3000 SBC board
-diff -Nur u-boot-2006-04-18-1106/MAINTAINERS u-boot-2006-04-18-1106-new/MAINTAINERS
---- u-boot-2006-04-18-1106/MAINTAINERS	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/MAINTAINERS	2006-07-05 11:19:44.000000000 +0000
-@@ -379,6 +379,11 @@
- 
- 	AT91RM9200DK		at91rm9200
- 
-+Alexander Chukov <sash@pdaXrom.org>
-+
-+	akita			xscale
-+	corgi			xscale
-+
- George G. Davis <gdavis@mvista.com>
- 
- 	assabet			SA1100
-diff -Nur u-boot-2006-04-18-1106/MAKEALL u-boot-2006-04-18-1106-new/MAKEALL
---- u-boot-2006-04-18-1106/MAKEALL	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/MAKEALL	2006-07-05 11:19:44.000000000 +0000
-@@ -206,7 +206,7 @@
- 	adsvix		cerf250		cradle		csb226		\
- 	delta		innokom		lubbock		pxa255_idp	\
- 	wepep250	xaeniax		xm250		xsengine	\
--	zylonite							\
-+	zylonite	akita	corgi					\
- "
- 
- LIST_ixp="ixdp425"
-diff -Nur u-boot-2006-04-18-1106/Makefile u-boot-2006-04-18-1106-new/Makefile
---- u-boot-2006-04-18-1106/Makefile	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/Makefile	2006-07-05 11:19:44.000000000 +0000
-@@ -61,7 +61,7 @@
- CROSS_COMPILE = powerpc-linux-
- endif
- ifeq ($(ARCH),arm)
--CROSS_COMPILE = arm-linux-
-+CROSS_COMPILE = armv5tel-linux-
- endif
- ifeq ($(ARCH),i386)
- ifeq ($(HOSTARCH),i386)
-@@ -1709,6 +1709,12 @@
- zylonite_config :
- 	@./mkconfig $(@:_config=) arm pxa zylonite
- 
-+akita_config 	:	unconfig
-+	@./mkconfig $(@:_config=) arm pxa akita
-+
-+corgi_config 	:	unconfig
-+	@./mkconfig $(@:_config=) arm pxa corgi
-+
- #########################################################################
- ## ARM1136 Systems
- #########################################################################
-diff -Nur u-boot-2006-04-18-1106/README u-boot-2006-04-18-1106-new/README
---- u-boot-2006-04-18-1106/README	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/README	2006-07-05 11:19:44.000000000 +0000
-@@ -311,7 +311,8 @@
- 		CONFIG_KB9202,		CONFIG_LART,		CONFIG_LPD7A400,
- 		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
- 		CONFIG_SHANNON,		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
--		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9
-+		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9,
-+		CONFIG_AKITA,		CONFIG_CORGI
- 
- 		MicroBlaze based boards:
- 		------------------------
-diff -Nur u-boot-2006-04-18-1106/board/akita/Makefile u-boot-2006-04-18-1106-new/board/akita/Makefile
---- u-boot-2006-04-18-1106/board/akita/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/Makefile	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,51 @@
-+#
-+# board/akita/Makefile
-+#
-+# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+#
-+# (C) Copyright 2000
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= akita.o nand.o kbd.o
-+SOBJS	:= lowlevel_init.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff -Nur u-boot-2006-04-18-1106/board/akita/akita.c u-boot-2006-04-18-1106-new/board/akita/akita.c
---- u-boot-2006-04-18-1106/board/akita/akita.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/akita.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,89 @@
-+/*
-+ * board/akita/akita.c
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+void set_turbo_mode(void);
-+
-+/* ------------------------------------------------------------------------- */
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	/* memory and cpu-speed are setup before relocation */
-+	/* so we do _nothing_ here */
-+
-+	/* arch number of Sharp Zaurus Akita : MACH_TYPE_AKITA */
-+	gd->bd->bi_arch_number = 744;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0xa0000100;
-+
-+	/* set cpu turbo mode */
-+	set_turbo_mode();
-+
-+	spitzkbd_init();
-+
-+	return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+	setenv("stdout", "serial");
-+	setenv("stderr", "serial");
-+	return 0;
-+}
-+
-+
-+int dram_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-+
-+	return 0;
-+}
-diff -Nur u-boot-2006-04-18-1106/board/akita/config.mk u-boot-2006-04-18-1106-new/board/akita/config.mk
---- u-boot-2006-04-18-1106/board/akita/config.mk	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/config.mk	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1 @@
-+TEXT_BASE = 0xa3000000
-diff -Nur u-boot-2006-04-18-1106/board/akita/kbd.c u-boot-2006-04-18-1106-new/board/akita/kbd.c
---- u-boot-2006-04-18-1106/board/akita/kbd.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/kbd.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,261 @@
-+/*
-+ * board/akita/kbd.c
-+ *
-+ * Keyboard driver for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from:
-+ *
-+ * linux/drivers/input/keyboard/spitzkbd.c
-+ *
-+ * Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series)
-+ *
-+ * Copyright (C) 2005 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GPIO_DFLT_LOW		0x400
-+#define GPIO_DFLT_HIGH		0x800
-+
-+void pxa_gpio_mode(int gpio_mode)
-+{
-+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-+	int gafr;
-+
-+	if (gpio_mode & GPIO_DFLT_LOW)
-+		GPCR(gpio) = GPIO_bit(gpio);
-+	else if (gpio_mode & GPIO_DFLT_HIGH)
-+		GPSR(gpio) = GPIO_bit(gpio);
-+	if (gpio_mode & GPIO_MD_MASK_DIR)
-+		GPDR(gpio) |= GPIO_bit(gpio);
-+	else
-+		GPDR(gpio) &= ~GPIO_bit(gpio);
-+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-+}
-+
-+#define SPITZ_KEY_STROBE_NUM         (11)
-+#define SPITZ_KEY_SENSE_NUM          (7)
-+
-+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
-+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
-+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
-+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
-+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
-+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
-+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
-+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
-+
-+#define SPITZ_GPIO_KEY_STROBE0       88
-+#define SPITZ_GPIO_KEY_STROBE1       23
-+#define SPITZ_GPIO_KEY_STROBE2       24
-+#define SPITZ_GPIO_KEY_STROBE3       25
-+#define SPITZ_GPIO_KEY_STROBE4       26
-+#define SPITZ_GPIO_KEY_STROBE5       27
-+#define SPITZ_GPIO_KEY_STROBE6       52
-+#define SPITZ_GPIO_KEY_STROBE7       103
-+#define SPITZ_GPIO_KEY_STROBE8       107
-+#define SPITZ_GPIO_KEY_STROBE9       108
-+#define SPITZ_GPIO_KEY_STROBE10      114
-+
-+#define SPITZ_GPIO_KEY_SENSE0        12
-+#define SPITZ_GPIO_KEY_SENSE1        17
-+#define SPITZ_GPIO_KEY_SENSE2        91
-+#define SPITZ_GPIO_KEY_SENSE3        34
-+#define SPITZ_GPIO_KEY_SENSE4        36
-+#define SPITZ_GPIO_KEY_SENSE5        38
-+#define SPITZ_GPIO_KEY_SENSE6        39
-+
-+#define SPITZ_GPIO_ON_KEY          (95)
-+
-+#define KB_ROWS			7
-+#define KB_COLS			11
-+#define KB_ROWMASK(r)		(1 << (r))
-+#define SCANCODE(r,c)		(((r)<<4) + (c) + 1)
-+#define	NR_SCANCODES		((KB_ROWS<<4) + 1)
-+
-+#define SCAN_INTERVAL		(50) /* ms */
-+#define HINGE_SCAN_INTERVAL	(150) /* ms */
-+
-+#define KB_DISCHARGE_DELAY	10
-+#define KB_ACTIVATE_DELAY	10
-+
-+static int spitz_strobes[] = {
-+	SPITZ_GPIO_KEY_STROBE0,
-+	SPITZ_GPIO_KEY_STROBE1,
-+	SPITZ_GPIO_KEY_STROBE2,
-+	SPITZ_GPIO_KEY_STROBE3,
-+	SPITZ_GPIO_KEY_STROBE4,
-+	SPITZ_GPIO_KEY_STROBE5,
-+	SPITZ_GPIO_KEY_STROBE6,
-+	SPITZ_GPIO_KEY_STROBE7,
-+	SPITZ_GPIO_KEY_STROBE8,
-+	SPITZ_GPIO_KEY_STROBE9,
-+	SPITZ_GPIO_KEY_STROBE10,
-+};
-+
-+static int spitz_senses[] = {
-+	SPITZ_GPIO_KEY_SENSE0,
-+	SPITZ_GPIO_KEY_SENSE1,
-+	SPITZ_GPIO_KEY_SENSE2,
-+	SPITZ_GPIO_KEY_SENSE3,
-+	SPITZ_GPIO_KEY_SENSE4,
-+	SPITZ_GPIO_KEY_SENSE5,
-+	SPITZ_GPIO_KEY_SENSE6,
-+};
-+
-+static inline void spitzkbd_discharge_all(void)
-+{
-+	/* STROBE All HiZ */
-+	GPCR0  =  SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-+	GPCR1  =  SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-+	GPCR2  =  SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-+	GPCR3  =  SPITZ_GPIO_G3_STROBE_BIT;
-+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-+}
-+
-+static inline void spitzkbd_activate_all(void)
-+{
-+	/* STROBE ALL -> High */
-+	GPSR0  =  SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR0 |=  SPITZ_GPIO_G0_STROBE_BIT;
-+	GPSR1  =  SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR1 |=  SPITZ_GPIO_G1_STROBE_BIT;
-+	GPSR2  =  SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR2 |=  SPITZ_GPIO_G2_STROBE_BIT;
-+	GPSR3  =  SPITZ_GPIO_G3_STROBE_BIT;
-+	GPDR3 |=  SPITZ_GPIO_G3_STROBE_BIT;
-+
-+	udelay(KB_DISCHARGE_DELAY);
-+}
-+
-+static inline void spitzkbd_activate_col(int col)
-+{
-+	int gpio = spitz_strobes[col];
-+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-+	GPSR(gpio) = GPIO_bit(gpio);
-+	GPDR(gpio) |= GPIO_bit(gpio);
-+}
-+
-+static inline void spitzkbd_reset_col(int col)
-+{
-+	int gpio = spitz_strobes[col];
-+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-+	GPCR(gpio) = GPIO_bit(gpio);
-+	GPDR(gpio) |= GPIO_bit(gpio);
-+}
-+
-+static inline int spitzkbd_get_row_status(int col)
-+{
-+	return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02)
-+		| ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08)
-+		| ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60);
-+}
-+
-+static int spitzkbd_scankeyboard(void)
-+{
-+	unsigned int row, col, rowd;
-+	unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0);
-+	int ret = -1;
-+
-+	num_pressed = 0;
-+	for (col = 0; col < KB_COLS; col++) {
-+		spitzkbd_discharge_all();
-+		udelay(KB_DISCHARGE_DELAY);
-+
-+		spitzkbd_activate_col(col);
-+		udelay(KB_ACTIVATE_DELAY);
-+
-+		rowd = spitzkbd_get_row_status(col);
-+		for (row = 0; row < KB_ROWS; row++) {
-+			unsigned int scancode, pressed;
-+
-+			scancode = SCANCODE(row, col);
-+			pressed = rowd & KB_ROWMASK(row);
-+
-+			if (pressed)
-+				ret = scancode;
-+		}
-+		spitzkbd_reset_col(col);
-+	}
-+
-+	spitzkbd_activate_all();
-+
-+	if (pwrkey)
-+		return -2;
-+	
-+	return ret;
-+}
-+
-+void spitzkbd_init(void)
-+{
-+	int i;
-+
-+	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
-+	for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++)
-+		pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
-+
-+	/* Set Strobe lines as outputs - set high */
-+	for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
-+		pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+	pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN);
-+}
-+
-+int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int scan;
-+	
-+	if (argc < 2)
-+		return 1;
-+
-+	scan = spitzkbd_scankeyboard();
-+
-+
-+//	if (scan >= 0)
-+//		printf("Scan = %d\n", scan);
-+//	else
-+//		printf("Nothing!\n");
-+
-+	return !(simple_strtol(argv[1], NULL, 10) == scan);
-+}
-+
-+U_BOOT_CMD(
-+	testkey,   2,      1,      do_testkey,
-+	"testkey - compare pressed key with arg\n",
-+	"<key scancode>"
-+);
-diff -Nur u-boot-2006-04-18-1106/board/akita/lowlevel_init.S u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S
---- u-boot-2006-04-18-1106/board/akita/lowlevel_init.S	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,135 @@
-+/*
-+ * board/akita/lowlevel_init.S
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * This was originally from the Lubbock u-boot port and from BLOB with cleanup
-+ *
-+ * NOTE: I haven't clean this up considerably, just enough to get it
-+ * running. See hal_platform_setup.h for the source. See
-+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
-+ * much cleaner.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+/* wait for coprocessor write complete */
-+   .macro CPWAIT reg
-+   mrc	p15,0,\reg,c2,c0,0
-+   mov	\reg,\reg
-+   sub	pc,pc,#4
-+   .endm
-+
-+/*********** Write out to HEX 7 segment leds *********/
-+
-+#undef DEBUG_HEXLOG
-+
-+#ifdef DEBUG_HEXLOG
-+#define LEDCTL		0x08000040
-+#define LEDDAT1	0x08000010
-+#define LEDDAT2	0x08000014
-+
-+.macro wait, count
-+	mov		r10, \count
-+0:
-+	subs	r10, r10, #1
-+	bne		0b
-+.endm
-+
-+.macro hexlog_init
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT1
-+	mov		r10, #0x0
-+	str		r10, [r11]
-+.endm
-+
-+.macro hexlog, val
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+
-+	ldr		r11, =LEDDAT1
-+	mov		r10, \val
-+	str		r10, [r11]
-+
-+	wait		#0x400000
-+.endm
-+
-+#else
-+
-+.macro hexlog_init
-+	nop
-+.endm
-+
-+.macro hexlog, val
-+	nop
-+.endm
-+
-+#endif
-+
-+/***********************************/
-+
-+/*
-+ *	Memory setup
-+ */
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+
-+	mov	pc, lr
-+
-+.globl set_turbo_mode
-+
-+set_turbo_mode:
-+	/* Turn on turbo mode */
-+	mrc	p14, 0, r2, c6, c0, 0
-+	orr	r2, r2, #0xB		/* Turbo, Fast-Bus, Freq change**/
-+	mcr	p14, 0, r2, c6, c0, 0
-+
-+	/* Setup vectors */
-+	ldr	r0, =TEXT_BASE
-+	ldr	r1, =TEXT_BASE+0x40
-+	ldr	r2, =0x0
-+1:
-+	ldr	r3, [r0]
-+	str	r3, [r2]
-+	add	r0, r0, #4
-+	add	r2, r2, #4
-+	cmp	r0, r1
-+	bne	1b
-+
-+	ldr	r0, =0x0
-+	ldr	r1, [r0, #4]
-+	str	r1, [r0]
-+
-+	mov	pc, lr
-diff -Nur u-boot-2006-04-18-1106/board/akita/nand.c u-boot-2006-04-18-1106-new/board/akita/nand.c
---- u-boot-2006-04-18-1106/board/akita/nand.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/nand.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,169 @@
-+/*
-+ * board/akita/nand.c
-+ *
-+ * NAND driver for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from mtd nand driver:
-+ *
-+ * drivers/mtd/nand/sharpsl.c
-+ *
-+ * Copyright (C) 2004 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+
-+#include <nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+
-+static int sharpsl_io_base = CFG_NAND_BASE;
-+
-+/* register offset */
-+#define ECCLPLB	 	sharpsl_io_base+0x00	/* line parity 7 - 0 bit */
-+#define ECCLPUB	 	sharpsl_io_base+0x04	/* line parity 15 - 8 bit */
-+#define ECCCP	   	sharpsl_io_base+0x08	/* column parity 5 - 0 bit */
-+#define ECCCNTR	 	sharpsl_io_base+0x0C	/* ECC byte counter */
-+#define ECCCLRR	 	sharpsl_io_base+0x10	/* cleare ECC */
-+#define FLASHIO	 	sharpsl_io_base+0x14	/* Flash I/O */
-+#define FLASHCTL	sharpsl_io_base+0x18	/* Flash Control */
-+
-+/* Flash control bit */
-+#define FLRYBY		(1 << 5)
-+#define FLCE1		(1 << 4)
-+#define FLWP		(1 << 3)
-+#define FLALE		(1 << 2)
-+#define FLCLE		(1 << 1)
-+#define FLCE0		(1 << 0)
-+
-+#define readb(address) *((volatile unsigned char *)(address))
-+#define writeb(v, address) *((volatile unsigned char *)(address))=v
-+
-+/*
-+ *	hardware specific access to control-lines
-+ */
-+static void
-+sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
-+{
-+	switch (cmd) {
-+	case NAND_CTL_SETCLE:
-+		writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRCLE:
-+		writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETALE:
-+		writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRALE:
-+		writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETNCE:
-+		writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRNCE:
-+		writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	}
-+}
-+
-+static int
-+sharpsl_nand_dev_ready(struct mtd_info* mtd)
-+{
-+	return !((readb(FLASHCTL) & FLRYBY) == 0);
-+}
-+
-+static void
-+sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
-+{
-+	writeb(0 ,ECCCLRR);
-+}
-+
-+static int
-+sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
-+				u_char* ecc_code)
-+{
-+	ecc_code[0] = ~readb(ECCLPUB);
-+	ecc_code[1] = ~readb(ECCLPLB);
-+	ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
-+	return readb(ECCCNTR) != 0;
-+}
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr sharpsl_akita_bbt = {
-+	.options = 0,
-+	.offs = 4,
-+	.len = 1,
-+	.pattern = scan_ff_pattern
-+};
-+
-+static struct nand_oobinfo akita_oobinfo = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 24,
-+	.eccpos = {
-+		0x5,  0x1,  0x2,  0x3,  0x6,  0x7,  0x15, 0x11,
-+		0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-+		0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-+	.oobfree = { {0x08, 0x09} }
-+};
-+
-+/*
-+ * Board-specific NAND initialization. The following members of the
-+ * argument are board-specific (per include/linux/mtd/nand.h):
-+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
-+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
-+ * - hwcontrol: hardwarespecific function for accesing control-lines
-+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
-+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
-+ *   only be provided if a hardware ECC is available
-+ * - eccmode: mode of ecc, see defines
-+ * - chip_delay: chip dependent delay for transfering data from array to
-+ *   read regs (tR)
-+ * - options: various chip options. They can partly be set to inform
-+ *   nand_scan about special functionality. See the defines for further
-+ *   explanation
-+ * Members with a "?" were not set in the merged testing-NAND branch,
-+ * so they are not set here either.
-+ */
-+void board_nand_init(struct nand_chip *nand)
-+{
-+	writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
-+
-+	nand->IO_ADDR_R = FLASHIO;
-+	nand->IO_ADDR_W = FLASHIO;
-+	nand->hwcontrol = sharpsl_nand_hwcontrol;
-+	nand->dev_ready = sharpsl_nand_dev_ready;
-+	nand->eccmode = NAND_ECC_HW3_256;
-+	nand->chip_delay = 15;
-+	nand->options = NAND_SAMSUNG_LP_OPTIONS;
-+	nand->badblock_pattern = &sharpsl_akita_bbt;
-+	nand->autooob = &akita_oobinfo;
-+	nand->enable_hwecc = sharpsl_nand_enable_hwecc;
-+	nand->calculate_ecc = sharpsl_nand_calculate_ecc;
-+	nand->correct_data = nand_correct_data;
-+}
-+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
-diff -Nur u-boot-2006-04-18-1106/board/akita/u-boot.lds u-boot-2006-04-18-1106-new/board/akita/u-boot.lds
---- u-boot-2006-04-18-1106/board/akita/u-boot.lds	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/u-boot.lds	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2000
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/pxa/start.o	(.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-diff -Nur u-boot-2006-04-18-1106/board/corgi/Makefile u-boot-2006-04-18-1106-new/board/corgi/Makefile
---- u-boot-2006-04-18-1106/board/corgi/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/Makefile	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,51 @@
-+#
-+# board/corgi/Makefile
-+#
-+# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+#
-+# (C) Copyright 2000
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= corgi.o nand.o kbd.o
-+SOBJS	:= lowlevel_init.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff -Nur u-boot-2006-04-18-1106/board/corgi/config.mk u-boot-2006-04-18-1106-new/board/corgi/config.mk
---- u-boot-2006-04-18-1106/board/corgi/config.mk	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/config.mk	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1 @@
-+TEXT_BASE = 0xa1000000
-diff -Nur u-boot-2006-04-18-1106/board/corgi/corgi.c u-boot-2006-04-18-1106-new/board/corgi/corgi.c
---- u-boot-2006-04-18-1106/board/corgi/corgi.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/corgi.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,87 @@
-+/*
-+ * board/corgi/corgi.c
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+/* ------------------------------------------------------------------------- */
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	/* memory and cpu-speed are setup before relocation */
-+	/* so we do _nothing_ here */
-+
-+	/* arch number of Sharp Zaurus Corgi : MACH_TYPE_CORGI */
-+	gd->bd->bi_arch_number = 423;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0xa0000100;
-+
-+	/* set cpu turbo mode */
-+	set_turbo_mode();
-+
-+	corgikbd_init();
-+
-+	return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+	setenv("stdout", "serial");
-+	setenv("stderr", "serial");
-+	return 0;
-+}
-+
-+
-+int dram_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-+
-+	return 0;
-+}
-diff -Nur u-boot-2006-04-18-1106/board/corgi/kbd.c u-boot-2006-04-18-1106-new/board/corgi/kbd.c
---- u-boot-2006-04-18-1106/board/corgi/kbd.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/kbd.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,202 @@
-+/*
-+ * board/corgi/kbd.c
-+ *
-+ * Keyboard driver for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from:
-+ *
-+ * linux/drivers/input/keyboard/spitzkbd.c
-+ *
-+ * Keyboard driver for Sharp Corgi models (SL-C7xx)
-+ *
-+ * Copyright (C) 2005 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GPIO_DFLT_LOW		0x400
-+#define GPIO_DFLT_HIGH		0x800
-+
-+void pxa_gpio_mode(int gpio_mode)
-+{
-+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-+	int gafr;
-+
-+	if (gpio_mode & GPIO_DFLT_LOW)
-+		GPCR(gpio) = GPIO_bit(gpio);
-+	else if (gpio_mode & GPIO_DFLT_HIGH)
-+		GPSR(gpio) = GPIO_bit(gpio);
-+	if (gpio_mode & GPIO_MD_MASK_DIR)
-+		GPDR(gpio) |= GPIO_bit(gpio);
-+	else
-+		GPDR(gpio) &= ~GPIO_bit(gpio);
-+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-+}
-+
-+/*
-+ * Corgi Keyboard Definitions
-+ */
-+#define CORGI_KEY_STROBE_NUM		(12)
-+#define CORGI_KEY_SENSE_NUM			(8)
-+#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-+#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-+#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-+#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-+#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-+#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-+#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-+#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-+#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-+#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-+#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-+#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-+
-+#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-+
-+#define KB_ROWS				8
-+#define KB_COLS				12
-+#define KB_ROWMASK(r)		(1 << (r))
-+#define SCANCODE(r,c)		( ((r)<<4) + (c) + 1 )
-+/* zero code, 124 scancodes */
-+#define	NR_SCANCODES		( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 )
-+
-+#define SCAN_INTERVAL		(50) /* ms */
-+#define HINGE_SCAN_INTERVAL	(250) /* ms */
-+
-+#define KB_DISCHARGE_DELAY	10
-+#define KB_ACTIVATE_DELAY	10
-+
-+static inline void corgikbd_discharge_all(void)
-+{
-+	/* STROBE All HiZ */
-+	GPCR2  = CORGI_GPIO_ALL_STROBE_BIT;
-+	GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT;
-+}
-+
-+static inline void corgikbd_activate_all(void)
-+{
-+	/* STROBE ALL -> High */
-+	GPSR2  = CORGI_GPIO_ALL_STROBE_BIT;
-+	GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT;
-+
-+	udelay(KB_DISCHARGE_DELAY);
-+
-+	/* Clear any interrupts we may have triggered when altering the GPIO lines */
-+	GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT;
-+	GEDR2 = CORGI_GPIO_LOW_SENSE_BIT;
-+}
-+
-+static inline void corgikbd_activate_col(int col)
-+{
-+	/* STROBE col -> High, not col -> HiZ */
-+	GPSR2 = CORGI_GPIO_STROBE_BIT(col);
-+	GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col);
-+}
-+
-+static inline void corgikbd_reset_col(int col)
-+{
-+	/* STROBE col -> Low */
-+	GPCR2 = CORGI_GPIO_STROBE_BIT(col);
-+	/* STROBE col -> out, not col -> HiZ */
-+	GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col);
-+}
-+
-+#define GET_ROWS_STATUS(c)	(((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT))
-+
-+static int corgikbd_scankeyboard(void)
-+{
-+	unsigned int row, col, rowd;
-+	unsigned int num_pressed;
-+	int ret = -1;
-+
-+	num_pressed = 0;
-+	for (col = 0; col < KB_COLS; col++) {
-+		corgikbd_discharge_all();
-+		udelay(KB_DISCHARGE_DELAY);
-+
-+		corgikbd_activate_col(col);
-+		udelay(KB_ACTIVATE_DELAY);
-+
-+		rowd = GET_ROWS_STATUS(col);
-+		for (row = 0; row < KB_ROWS; row++) {
-+			unsigned int scancode, pressed;
-+
-+			scancode = SCANCODE(row, col);
-+			pressed = rowd & KB_ROWMASK(row);
-+
-+			if (pressed)
-+			    ret = scancode;
-+		}
-+		corgikbd_reset_col(col);
-+	}
-+
-+	corgikbd_activate_all();
-+
-+	return ret;
-+}
-+
-+void corgikbd_init(void)
-+{
-+	int i;
-+	
-+	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
-+	for (i = 0; i < CORGI_KEY_SENSE_NUM; i++)
-+		pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
-+
-+	/* Set Strobe lines as outputs - set high */
-+	for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
-+		pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+	/* Setup the headphone jack as an input */
-+	pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
-+}
-+
-+int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int scan;
-+	
-+	if (argc < 2)
-+		return 1;
-+
-+	scan = corgikbd_scankeyboard();
-+
-+
-+//	if (scan >= 0)
-+//		printf("Scan = %d\n", scan);
-+//	else
-+//		printf("Nothing!\n");
-+
-+	return !(simple_strtol(argv[1], NULL, 10) == scan);
-+}
-+
-+U_BOOT_CMD(
-+	testkey,   2,      1,      do_testkey,
-+	"testkey - compare pressed key with arg\n",
-+	"<key scancode>"
-+);
-diff -Nur u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S
---- u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,136 @@
-+/*
-+ * board/corgi/lowlevel_init.S
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * This was originally from the Lubbock u-boot port and from BLOB with cleanup
-+ *
-+ * NOTE: I haven't clean this up considerably, just enough to get it
-+ * running. See hal_platform_setup.h for the source. See
-+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
-+ * much cleaner.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+/* wait for coprocessor write complete */
-+   .macro CPWAIT reg
-+   mrc	p15,0,\reg,c2,c0,0
-+   mov	\reg,\reg
-+   sub	pc,pc,#4
-+   .endm
-+
-+/*********** Write out to HEX 7 segment leds *********/
-+
-+#undef DEBUG_HEXLOG
-+
-+#ifdef DEBUG_HEXLOG
-+#define LEDCTL		0x08000040
-+#define LEDDAT1	0x08000010
-+#define LEDDAT2	0x08000014
-+
-+.macro wait, count
-+	mov		r10, \count
-+0:
-+	subs	r10, r10, #1
-+	bne		0b
-+.endm
-+
-+.macro hexlog_init
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT1
-+	mov		r10, #0x0
-+	str		r10, [r11]
-+.endm
-+
-+.macro hexlog, val
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+
-+	ldr		r11, =LEDDAT1
-+	mov		r10, \val
-+	str		r10, [r11]
-+
-+	wait		#0x400000
-+.endm
-+
-+#else
-+
-+.macro hexlog_init
-+	nop
-+.endm
-+
-+.macro hexlog, val
-+	nop
-+.endm
-+
-+#endif
-+
-+/***********************************/
-+
-+/*
-+ *	Memory setup
-+ */
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+
-+	mov	pc, lr
-+
-+.globl set_turbo_mode
-+
-+set_turbo_mode:
-+	/* Turn on turbo mode */
-+	mrc	p14, 0, r2, c6, c0, 0
-+	orr	r2, r2, #0x3		/* Turbo, Freq change */
-+	mcr	p14, 0, r2, c6, c0, 0
-+
-+
-+	/* Setup vectors */
-+	ldr	r0, =TEXT_BASE
-+	ldr	r1, =TEXT_BASE+0x40
-+	ldr	r2, =0x0
-+1:
-+	ldr	r3, [r0]
-+	str	r3, [r2]
-+	add	r0, r0, #4
-+	add	r2, r2, #4
-+	cmp	r0, r1
-+	bne	1b
-+
-+	ldr	r0, =0x0
-+	ldr	r1, [r0, #4]
-+	str	r1, [r0]
-+
-+	mov	pc, lr
-diff -Nur u-boot-2006-04-18-1106/board/corgi/nand.c u-boot-2006-04-18-1106-new/board/corgi/nand.c
---- u-boot-2006-04-18-1106/board/corgi/nand.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/nand.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,157 @@
-+/*
-+ * board/corgi/nand.c
-+ *
-+ * NAND driver for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from mtd nand driver:
-+ *
-+ * drivers/mtd/nand/sharpsl.c
-+ *
-+ * Copyright (C) 2004 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+
-+#include <nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+
-+static int sharpsl_io_base = CFG_NAND_BASE;
-+
-+/* register offset */
-+#define ECCLPLB	 	sharpsl_io_base+0x00	/* line parity 7 - 0 bit */
-+#define ECCLPUB	 	sharpsl_io_base+0x04	/* line parity 15 - 8 bit */
-+#define ECCCP	   	sharpsl_io_base+0x08	/* column parity 5 - 0 bit */
-+#define ECCCNTR	 	sharpsl_io_base+0x0C	/* ECC byte counter */
-+#define ECCCLRR	 	sharpsl_io_base+0x10	/* cleare ECC */
-+#define FLASHIO	 	sharpsl_io_base+0x14	/* Flash I/O */
-+#define FLASHCTL	sharpsl_io_base+0x18	/* Flash Control */
-+
-+/* Flash control bit */
-+#define FLRYBY		(1 << 5)
-+#define FLCE1		(1 << 4)
-+#define FLWP		(1 << 3)
-+#define FLALE		(1 << 2)
-+#define FLCLE		(1 << 1)
-+#define FLCE0		(1 << 0)
-+
-+#define readb(address) *((volatile unsigned char *)(address))
-+#define writeb(v, address) *((volatile unsigned char *)(address))=v
-+
-+/*
-+ *	hardware specific access to control-lines
-+ */
-+static void
-+sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
-+{
-+	switch (cmd) {
-+	case NAND_CTL_SETCLE:
-+		writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRCLE:
-+		writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETALE:
-+		writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRALE:
-+		writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETNCE:
-+		writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRNCE:
-+		writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	}
-+}
-+
-+static int
-+sharpsl_nand_dev_ready(struct mtd_info* mtd)
-+{
-+	return !((readb(FLASHCTL) & FLRYBY) == 0);
-+}
-+
-+static void
-+sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
-+{
-+	writeb(0 ,ECCCLRR);
-+}
-+
-+static int
-+sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
-+				u_char* ecc_code)
-+{
-+	ecc_code[0] = ~readb(ECCLPUB);
-+	ecc_code[1] = ~readb(ECCLPLB);
-+	ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
-+	return readb(ECCCNTR) != 0;
-+}
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr sharpsl_bbt = {
-+	.options = 0,
-+	.offs = 4,
-+	.len = 2,
-+	.pattern = scan_ff_pattern
-+};
-+
-+/*
-+ * Board-specific NAND initialization. The following members of the
-+ * argument are board-specific (per include/linux/mtd/nand.h):
-+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
-+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
-+ * - hwcontrol: hardwarespecific function for accesing control-lines
-+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
-+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
-+ *   only be provided if a hardware ECC is available
-+ * - eccmode: mode of ecc, see defines
-+ * - chip_delay: chip dependent delay for transfering data from array to
-+ *   read regs (tR)
-+ * - options: various chip options. They can partly be set to inform
-+ *   nand_scan about special functionality. See the defines for further
-+ *   explanation
-+ * Members with a "?" were not set in the merged testing-NAND branch,
-+ * so they are not set here either.
-+ */
-+void board_nand_init(struct nand_chip *nand)
-+{
-+	writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
-+
-+	nand->IO_ADDR_R = FLASHIO;
-+	nand->IO_ADDR_W = FLASHIO;
-+	nand->hwcontrol = sharpsl_nand_hwcontrol;
-+	nand->dev_ready = sharpsl_nand_dev_ready;
-+	nand->eccmode = NAND_ECC_HW3_256;
-+	nand->chip_delay = 15;
-+	nand->badblock_pattern = &sharpsl_bbt;
-+	nand->enable_hwecc = sharpsl_nand_enable_hwecc;
-+	nand->calculate_ecc = sharpsl_nand_calculate_ecc;
-+	nand->correct_data = nand_correct_data;
-+}
-+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
-diff -Nur u-boot-2006-04-18-1106/board/corgi/u-boot.lds u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds
---- u-boot-2006-04-18-1106/board/corgi/u-boot.lds	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2000
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/pxa/start.o	(.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-diff -Nur u-boot-2006-04-18-1106/common/cmd_nand.c u-boot-2006-04-18-1106-new/common/cmd_nand.c
---- u-boot-2006-04-18-1106/common/cmd_nand.c	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/common/cmd_nand.c	2006-07-05 11:19:44.000000000 +0000
-@@ -81,6 +81,63 @@
- 	return 0;
- }
- 
-+#ifdef NAND_LOGICAL
-+/////////////////////////////////////////////////////////////////////
-+// oob structure
-+/////////////////////////////////////////////////////////////////////
-+
-+#define NAND_NOOB_LOGADDR_00		8
-+#define NAND_NOOB_LOGADDR_01		9
-+#define NAND_NOOB_LOGADDR_10		10
-+#define NAND_NOOB_LOGADDR_11		11
-+#define NAND_NOOB_LOGADDR_20		12
-+#define NAND_NOOB_LOGADDR_21		13
-+
-+static uint nand_get_logical_no(unsigned char *oob)
-+{
-+    unsigned short us,bit;
-+    int par;
-+    int good0, good1;
-+
-+    if(oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] &&
-+       oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]){
-+	good0 = NAND_NOOB_LOGADDR_00;
-+	good1 = NAND_NOOB_LOGADDR_01;
-+    }else
-+    if(oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] &&
-+       oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]){
-+	good0 = NAND_NOOB_LOGADDR_10;
-+	good1 = NAND_NOOB_LOGADDR_11;
-+    }else
-+    if(oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] &&
-+       oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]){
-+	good0 = NAND_NOOB_LOGADDR_20;
-+	good1 = NAND_NOOB_LOGADDR_21;
-+    }else{
-+	return (uint)-1;
-+    }
-+
-+    us = (((unsigned short)(oob[good0]) & 0x00ff) << 0) |
-+	 (((unsigned short)(oob[good1]) & 0x00ff) << 8);
-+
-+    par = 0;
-+    for(bit = 0x0001; bit != 0; bit <<= 1){
-+	if(us & bit){
-+	    par++;
-+	}
-+    }
-+    if(par & 1){
-+	return (uint)-2;
-+    }
-+
-+    if(us == 0xffff){
-+	return 0xffff;
-+    }else{
-+	return ((us & 0x07fe) >> 1);
-+    }
-+}
-+#endif
-+
- /* ------------------------------------------------------------------------- */
- 
- static void
-@@ -245,6 +302,55 @@
- 		if (off == 0 && size == 0)
- 			return 1;
- 
-+#ifdef NAND_LOGICAL
-+		s = strchr(cmd, '.');
-+		if (s != NULL) {
-+			if (strcmp(s, ".logical") == 0) {
-+				int blocks = NAND_LOGICAL_SIZE / nand->erasesize;
-+				ulong *log2phy = malloc(blocks * sizeof(ulong));
-+				u_char *oobuf = malloc(nand->oobblock + nand->oobsize);
-+				int i;
-+				ulong offset;
-+				ret = 1;
-+				for (i = 0; i < blocks; i++)
-+					log2phy[i] = (uint) -1;
-+				offset = 0;
-+				for (i = 0; i < blocks; i++) {
-+					ret = nand_read_raw(nand, oobuf, offset, nand->oobblock, nand->oobsize);
-+					if (!ret) {
-+						int log_no = nand_get_logical_no(oobuf + nand->oobblock);
-+						if (((int)log_no >= 0) && (log_no < blocks)) {
-+							log2phy[log_no] = offset;
-+							//printf("NAND logical - %08X -> %04X\n", offset, log_no);
-+						}
-+					}
-+					offset += nand->erasesize;
-+				}
-+				
-+				for (i = 0; i < size / nand->erasesize; i++) {
-+					ulong sz = nand->erasesize;
-+					offset = log2phy[off / nand->erasesize];
-+					if ((int)offset < 0) {
-+					        printf("NAND logical - offset %08X not found\n", off);
-+						return 1;
-+					}
-+					//printf("NAND logical - %04X -> %08X\n", off / nand->erasesize, offset);
-+					ret = nand_read(nand, offset, &sz, (u_char *)addr);
-+					if (ret) {
-+						printf("NAND logical - offset %08X, read error\n", off);
-+						return 1;
-+					}
-+					off += nand->erasesize;
-+					addr += nand->erasesize;
-+				}
-+				printf(" %d bytes read from NAND logical\n", size);
-+				free(oobuf);
-+				free(log2phy);
-+				return ret == 0 ? 0 : 1;
-+			}
-+		}
-+#endif
-+
- 		i = strncmp(cmd, "read", 4) == 0;	/* 1 = read, 0 = write */
- 		printf("\nNAND %s: device %d offset %u, size %u ... ",
- 		       i ? "read" : "write", nand_curr_device, off, size);
-diff -Nur u-boot-2006-04-18-1106/cpu/pxa/config.mk u-boot-2006-04-18-1106-new/cpu/pxa/config.mk
---- u-boot-2006-04-18-1106/cpu/pxa/config.mk	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/cpu/pxa/config.mk	2006-07-05 11:19:44.000000000 +0000
-@@ -22,8 +22,7 @@
- # MA 02111-1307 USA
- #
- 
--PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
--	-msoft-float
-+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 -fomit-frame-pointer
- 
- #PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100
- PLATFORM_CPPFLAGS += -march=armv5 -mtune=xscale
-@@ -32,5 +31,5 @@
- # Supply options according to compiler version
- #
- # ========================================================================
--PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
-+#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
- PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
-diff -Nur u-boot-2006-04-18-1106/cpu/pxa/start.S u-boot-2006-04-18-1106-new/cpu/pxa/start.S
---- u-boot-2006-04-18-1106/cpu/pxa/start.S	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/cpu/pxa/start.S	2006-07-05 11:19:44.000000000 +0000
-@@ -42,6 +42,7 @@
- 	ldr	pc, _irq
- 	ldr	pc, _fiq
- 
-+_reset:			.word reset
- _undefined_instruction: .word undefined_instruction
- _software_interrupt:	.word software_interrupt
- _prefetch_abort:	.word prefetch_abort
-diff -Nur u-boot-2006-04-18-1106/fs/cramfs/cramfs.c u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c
---- u-boot-2006-04-18-1106/fs/cramfs/cramfs.c	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c	2006-07-05 11:19:44.000000000 +0000
-@@ -44,8 +44,13 @@
- 
- /* CPU address space offset calculation macro, struct part_info offset is
-  * device address space offset, so we need to shift it by a device start address. */
-+#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
- extern flash_info_t flash_info[];
- #define PART_OFFSET(x)	(x->offset + flash_info[x->dev->id->num].start[0])
-+#else
-+static struct cramfs_super super_fake;
-+#define PART_OFFSET(x)	(&super_fake)
-+#endif
- 
- static int cramfs_read_super (struct part_info *info)
- {
-diff -Nur u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h
---- u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h	2006-07-05 11:19:44.000000000 +0000
-@@ -1269,15 +1269,16 @@
- #define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
- #define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
- 
--#define GPLR(x)		((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3)
--#define GPDR(x)		((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3)
--#define GPSR(x)		((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3)
--#define GPCR(x)		((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3)
--#define GRER(x)		((((x) & 0x7f) < 96) ? _GRER(x) : GRER3)
--#define GFER(x)		((((x) & 0x7f) < 96) ? _GFER(x) : GFER3)
--#define GEDR(x)		((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3)
--#define GAFR(x)		((((x) & 0x7f) < 96) ? _GAFR(x) : \
--			 ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U))
-+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-+
- #else
- 
- #define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
-diff -Nur u-boot-2006-04-18-1106/include/configs/akita.h u-boot-2006-04-18-1106-new/include/configs/akita.h
---- u-boot-2006-04-18-1106/include/configs/akita.h	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/include/configs/akita.h	2006-07-13 11:00:46.000000000 +0000
-@@ -0,0 +1,324 @@
-+/*
-+ * include/configs/akita.h
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C1000/C3100.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+
-+#undef SKIP_CONFIG_RELOCATE_UBOOT
-+
-+#undef CONFIG_HARD_I2C
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_PXA27X		1	/* This is an PXA27x CPU */
-+#define CONFIG_AKITA		1	/* on Sharp Zaurus Akita */
-+//#define CONFIG_MMC			1
-+#define BOARD_LATE_INIT		1
-+
-+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-+
-+#define RTC			1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+//#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 256*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_FFUART	       1       /* we use FFUART on Mainstone */
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_BAUDRATE	       115200
-+//#define CONFIG_DOS_PARTITION   1
-+
-+#undef CONFIG_SHOW_BOOT_PROGRESS
-+
-+#if 1
-+#define	CONFIG_BOOTDELAY	1
-+#define CONFIG_AUTOBOOT_PROMPT  "Autobooting in %d seconds\n"
-+
-+#define	CONFIG_BOOTCOMMAND						\
-+	"if testkey 101 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x00060000 0x00540000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 2 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 18 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; "	 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 3 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; "	 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"nand read.logical 0xa1000000 0x005a0000 0x00160000; "								\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " 	\
-+	"bootm; "
-+#else
-+#define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
-+#endif
-+
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192"
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-+#define CONFIG_INITRD_TAG	 1
-+
-+#define CONFIG_COMMANDS		((				\
-+				    CONFIG_CMD_DFL 	| 	\
-+				    CFG_CMD_NAND 	|	\
-+				    CFG_CMD_JFFS2	 	\
-+				    ) & ~(			\
-+				    CFG_CMD_NET 	| 	\
-+				    CFG_CMD_FLASH 	| 	\
-+				    CFG_CMD_IMLS 	 	\
-+				))
-+
-+//				    CFG_CMD_ENV
-+			
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_HUSH_PARSER		1
-+#define CFG_PROMPT_HUSH_PS2	"> "
-+
-+#define CFG_LONGHELP				/* undef to save memory		*/
-+#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+
-+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS		16		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+#define CFG_DEVICE_NULLDEV	1
-+
-+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-+
-+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR		0xa1000000	/* default load address */
-+
-+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-+#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
-+
-+						/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+#define CFG_MMC_BASE		0xF0000000
-+
-+/*
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+/*
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
-+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
-+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
-+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
-+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
-+
-+#define PHYS_FLASH_1		0xd4000000 /* Flash Bank #1 */
-+
-+#define CFG_DRAM_BASE		0xa0000000
-+#define CFG_DRAM_SIZE		0x04000000
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*
-+ * GPIO settings for Mainstone
-+ */
-+
-+#define CFG_GPSR0_VAL		0x00708800
-+#define CFG_GPSR1_VAL		0x03cf0002
-+#define CFG_GPSR2_VAL		0x0021FC00
-+#define CFG_GPSR3_VAL		0x00000000
-+
-+#define CFG_GPCR0_VAL		0x00001000
-+#define CFG_GPCR1_VAL		0x00000000
-+#define CFG_GPCR2_VAL		0x00000000
-+#define CFG_GPCR3_VAL		0x00000000
-+
-+#define CFG_GPDR0_VAL		0xC27B9C04
-+#define CFG_GPDR1_VAL		0x00EFAA83
-+#define CFG_GPDR2_VAL		0x0E23FC00
-+#define CFG_GPDR3_VAL		0x001E1F81
-+
-+#define CFG_GAFR0_L_VAL		0x94F00000
-+#define CFG_GAFR0_U_VAL		0x015A859A
-+#define CFG_GAFR1_L_VAL		0x999A955A
-+#define CFG_GAFR1_U_VAL		0x0005A4AA
-+#define CFG_GAFR2_L_VAL		0x6AA00000
-+#define CFG_GAFR2_U_VAL		0x55A8041A
-+#define CFG_GAFR3_L_VAL		0x56AA955A
-+#define CFG_GAFR3_U_VAL		0x00000001
-+
-+#define CFG_PSSR_VAL		0x20	// ???????????
-+
-+/*
-+ * PCMCIA and CF Interfaces
-+ */
-+#define CFG_MECR_VAL		0x00000001
-+#define CFG_MCMEM0_VAL		0x00010204
-+#define CFG_MCMEM1_VAL		0x00010204
-+#define CFG_MCATT0_VAL		0x00010204
-+#define CFG_MCATT1_VAL		0x00010204
-+#define CFG_MCIO0_VAL		0x0000c108
-+#define CFG_MCIO1_VAL		0x0001c108
-+
-+//#define CONFIG_PXA_PCMCIA 1
-+//#define CONFIG_PXA_IDE 1
-+
-+#define CONFIG_PCMCIA_SLOT_A 1
-+/* just to keep build system happy  */
-+
-+#define CFG_PCMCIA_MEM_ADDR     0x28000000
-+#define CFG_PCMCIA_MEM_SIZE     0x04000000
-+
-+#define CFG_IDE_MAXBUS		1
-+/* max. 1 IDE bus		*/
-+#define CFG_IDE_MAXDEVICE	1
-+/* max. 1 drive per IDE bus	*/
-+
-+#define CFG_ATA_IDE0_OFFSET	0x0000
-+
-+#define CFG_ATA_BASE_ADDR	0x20000000
-+
-+/* Offset for data I/O			*/
-+#define CFG_ATA_DATA_OFFSET	0x1f0
-+
-+/* Offset for normal register accesses	*/
-+#define CFG_ATA_REG_OFFSET	0x1f0
-+
-+/* Offset for alternate registers	*/
-+#define CFG_ATA_ALT_OFFSET	0x3f0
-+
-+#define CFG_NO_FLASH 1
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-+
-+/*-----------------------------------------------------------------------
-+ * NAND-FLASH stuff
-+ *-----------------------------------------------------------------------
-+ */
-+#undef CFG_NAND_LEGACY
-+
-+/* NAND debugging */
-+//#define CONFIG_MTD_DEBUG
-+//#define CONFIG_MTD_DEBUG_VERBOSE 3
-+
-+#define CFG_NAND_BASE		0xd4000000
-+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define NAND_MAX_CHIPS 		1
-+
-+//#define CONFIG_MTD_NAND_VERIFY_WRITE 1  /* verify all writes!!!         */
-+//#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
-+
-+#define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-+#define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
-+
-+/*
-+ * JFFS2 partitions
-+ *
-+ */
-+/* No command line, one static partition */
-+//#undef CONFIG_JFFS2_CMDLINE
-+//#define CONFIG_JFFS2_DEV		"nand0"
-+//#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-+//#define CONFIG_JFFS2_PART_OFFSET	0x00060000
-+
-+/* mtdparts command line support */
-+/* Note: fake mtd_id used, no linux mtd map file */
-+
-+#define CONFIG_JFFS2_CMDLINE
-+#define MTDIDS_DEFAULT		"nand0=laze-0"
-+//#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+
-+/*
-+ * SHARP SL NAND logical partition
-+ */
-+#define NAND_LOGICAL		1
-+#define NAND_LOGICAL_SIZE	0x700000
-+
-+/*
-+ * Environment
-+ */
-+
-+#define CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_OFFSET		0x40000
-+//#define CFG_ENV_OFFSET_REDUND	0x44000
-+#define CFG_ENV_SIZE		0x20000
-+
-+#endif	/* __CONFIG_H */
-diff -Nur u-boot-2006-04-18-1106/include/configs/corgi.h u-boot-2006-04-18-1106-new/include/configs/corgi.h
---- u-boot-2006-04-18-1106/include/configs/corgi.h	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/include/configs/corgi.h	2006-07-13 11:19:04.000000000 +0000
-@@ -0,0 +1,326 @@
-+/*
-+ * include/configs/corgi.h
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C7x0/C860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+
-+#undef SKIP_CONFIG_RELOCATE_UBOOT
-+
-+#undef CONFIG_HARD_I2C
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_PXA250		1	/* This is an PXA255 CPU    */
-+#define CONFIG_CORGI		1	/* on Sharp Zaurus Corgi    */
-+//#define CONFIG_MMC			1
-+#define BOARD_LATE_INIT		1
-+
-+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-+
-+#define RTC			1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+//#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 256*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_FFUART	       1       /* we use FFUART on Mainstone */
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_BAUDRATE	       115200
-+//#define CONFIG_DOS_PARTITION   1
-+
-+#undef CONFIG_SHOW_BOOT_PROGRESS
-+
-+#if 1
-+#define	CONFIG_BOOTDELAY	1
-+#define CONFIG_AUTOBOOT_PROMPT  "Autobooting in %d seconds\n"
-+
-+#define	CONFIG_BOOTCOMMAND						\
-+	"if testkey 101 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x00060000 0x00540000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 2 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " 				\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 18 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; "			 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 3 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; "			 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"nand read.logical 0xa0800000 0x005a0000 0x00160000; "								\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " 			\
-+	"bootm; "
-+#else
-+#define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
-+#endif
-+
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192"
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-+#define CONFIG_INITRD_TAG	 1
-+
-+#define CONFIG_COMMANDS		((				\
-+				    CONFIG_CMD_DFL 	| 	\
-+				    CFG_CMD_NAND 	|	\
-+				    CFG_CMD_JFFS2	 	\
-+				    ) & ~(			\
-+				    CFG_CMD_NET 	| 	\
-+				    CFG_CMD_FLASH 	| 	\
-+				    CFG_CMD_IMLS 	 	\
-+				))
-+
-+//				    CFG_CMD_ENV
-+			
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_HUSH_PARSER		1
-+#define CFG_PROMPT_HUSH_PS2	"> "
-+
-+#define CFG_LONGHELP				/* undef to save memory		*/
-+#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+
-+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS		16		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+#define CFG_DEVICE_NULLDEV	1
-+
-+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-+
-+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR		0xa0800000	/* default load address */
-+
-+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-+#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
-+
-+						/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+#define CFG_MMC_BASE		0xF0000000
-+
-+/*
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+/*
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
-+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
-+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
-+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
-+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
-+
-+#define PHYS_FLASH_1		0xd4000000 /* Flash Bank #1 */
-+
-+#define CFG_DRAM_BASE		0xa0000000
-+#define CFG_DRAM_SIZE		0x04000000
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*
-+ * GPIO settings for Mainstone
-+ */
-+
-+#define CFG_GPSR0_VAL		0x00708800
-+#define CFG_GPSR1_VAL		0x03cf0002
-+#define CFG_GPSR2_VAL		0x0021FC00
-+#define CFG_GPSR3_VAL		0x00000000
-+
-+#define CFG_GPCR0_VAL		0x00001000
-+#define CFG_GPCR1_VAL		0x00000000
-+#define CFG_GPCR2_VAL		0x00000000
-+#define CFG_GPCR3_VAL		0x00000000
-+
-+#define CFG_GPDR0_VAL		0xC27B9C04
-+#define CFG_GPDR1_VAL		0x00EFAA83
-+#define CFG_GPDR2_VAL		0x0E23FC00
-+#define CFG_GPDR3_VAL		0x001E1F81
-+
-+#define CFG_GAFR0_L_VAL		0x94F00000
-+#define CFG_GAFR0_U_VAL		0x015A859A
-+#define CFG_GAFR1_L_VAL		0x999A955A
-+#define CFG_GAFR1_U_VAL		0x0005A4AA
-+#define CFG_GAFR2_L_VAL		0x6AA00000
-+#define CFG_GAFR2_U_VAL		0x55A8041A
-+#define CFG_GAFR3_L_VAL		0x56AA955A
-+#define CFG_GAFR3_U_VAL		0x00000001
-+
-+#define CFG_PSSR_VAL		0x20	// ???????????
-+
-+/*
-+ * PCMCIA and CF Interfaces
-+ */
-+#define CFG_MECR_VAL		0x00000001
-+#define CFG_MCMEM0_VAL		0x00010204
-+#define CFG_MCMEM1_VAL		0x00010204
-+#define CFG_MCATT0_VAL		0x00010204
-+#define CFG_MCATT1_VAL		0x00010204
-+#define CFG_MCIO0_VAL		0x0000c108
-+#define CFG_MCIO1_VAL		0x0001c108
-+
-+//#define CONFIG_PXA_PCMCIA 1
-+//#define CONFIG_PXA_IDE 1
-+
-+#define CONFIG_PCMCIA_SLOT_A 1
-+/* just to keep build system happy  */
-+
-+#define CFG_PCMCIA_MEM_ADDR     0x28000000
-+#define CFG_PCMCIA_MEM_SIZE     0x04000000
-+
-+#define CFG_IDE_MAXBUS		1
-+/* max. 1 IDE bus		*/
-+#define CFG_IDE_MAXDEVICE	1
-+/* max. 1 drive per IDE bus	*/
-+
-+#define CFG_ATA_IDE0_OFFSET	0x0000
-+
-+#define CFG_ATA_BASE_ADDR	0x20000000
-+
-+/* Offset for data I/O			*/
-+#define CFG_ATA_DATA_OFFSET	0x1f0
-+
-+/* Offset for normal register accesses	*/
-+#define CFG_ATA_REG_OFFSET	0x1f0
-+
-+/* Offset for alternate registers	*/
-+#define CFG_ATA_ALT_OFFSET	0x3f0
-+
-+#define CFG_NO_FLASH 1
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-+
-+/*-----------------------------------------------------------------------
-+ * NAND-FLASH stuff
-+ *-----------------------------------------------------------------------
-+ */
-+#undef CFG_NAND_LEGACY
-+
-+/* NAND debugging */
-+//#define CONFIG_MTD_DEBUG
-+//#define CONFIG_MTD_DEBUG_VERBOSE 3
-+
-+#define CFG_NAND_BASE		0xd4000000
-+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define NAND_MAX_CHIPS 		1
-+
-+//#define CONFIG_MTD_NAND_VERIFY_WRITE 1  /* verify all writes!!!         */
-+//#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
-+
-+#define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-+#define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
-+
-+#define NAND_ALLOW_ERASE_ALL	1
-+
-+/*
-+ * JFFS2 partitions
-+ *
-+ */
-+/* No command line, one static partition */
-+//#undef CONFIG_JFFS2_CMDLINE
-+//#define CONFIG_JFFS2_DEV		"nand0"
-+//#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-+//#define CONFIG_JFFS2_PART_OFFSET	0x00060000
-+
-+/* mtdparts command line support */
-+/* Note: fake mtd_id used, no linux mtd map file */
-+
-+#define CONFIG_JFFS2_CMDLINE
-+#define MTDIDS_DEFAULT		"nand0=laze-0"
-+//#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+
-+/*
-+ * SHARP SL NAND logical partition
-+ */
-+#define NAND_LOGICAL		1
-+#define NAND_LOGICAL_SIZE	0x700000
-+
-+/*
-+ * Environment
-+ */
-+
-+#define CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_OFFSET		0x40000
-+//#define CFG_ENV_OFFSET_REDUND	0x44000
-+#define CFG_ENV_SIZE		0x20000
-+
-+#endif	/* __CONFIG_H */
---- s/examples/Makefile.orig	2006-12-09 15:08:45.000000000 +0600
-+++ s/examples/Makefile	2006-12-09 15:09:00.000000000 +0600
-@@ -60,7 +60,7 @@
- include $(TOPDIR)/config.mk
- 
- SREC	= hello_world.srec
--BIN	= hello_world.bin hello_world
-+BIN	= hello_world hello_world.bin
- 
- ifeq ($(CPU),mpc8xx)
- SREC	= test_burst.srec
-@@ -122,7 +122,7 @@
- 
- CPPFLAGS += -I..
- 
--all:	.depend $(OBJS) $(LIB) $(SREC) $(BIN)
-+all:	.depend $(OBJS) $(LIB) $(BIN) $(SREC)
- 
- #########################################################################
- $(LIB): .depend $(LIBOBJS)
-diff -Nur u-boot-2006-04-18-1106/CREDITS u-boot-2006-04-18-1106-new/CREDITS
---- u-boot-2006-04-18-1106/CREDITS	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/CREDITS	2006-07-05 11:19:44.000000000 +0000
-@@ -93,6 +93,12 @@
- E: jonathan.debruyne@siemens.atea.be
- D: Port to Siemens IAD210 board
- 
-+N: Alexander Chukov
-+E: sash@pdaXrom.org
-+D: initial support for Sharp Zaurus SL-C1000/3100
-+D: initial support for Sharp Zaurus SL-C7x0/C860
-+W: http://www.pdaXrom.org
-+
- N: Ken Chou
- E: kchou@ieee.org
- D: Support for A3000 SBC board
-diff -Nur u-boot-2006-04-18-1106/MAINTAINERS u-boot-2006-04-18-1106-new/MAINTAINERS
---- u-boot-2006-04-18-1106/MAINTAINERS	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/MAINTAINERS	2006-07-05 11:19:44.000000000 +0000
-@@ -379,6 +379,11 @@
- 
- 	AT91RM9200DK		at91rm9200
- 
-+Alexander Chukov <sash@pdaXrom.org>
-+
-+	akita			xscale
-+	corgi			xscale
-+
- George G. Davis <gdavis@mvista.com>
- 
- 	assabet			SA1100
-diff -Nur u-boot-2006-04-18-1106/MAKEALL u-boot-2006-04-18-1106-new/MAKEALL
---- u-boot-2006-04-18-1106/MAKEALL	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/MAKEALL	2006-07-05 11:19:44.000000000 +0000
-@@ -206,7 +206,7 @@
- 	adsvix		cerf250		cradle		csb226		\
- 	delta		innokom		lubbock		pxa255_idp	\
- 	wepep250	xaeniax		xm250		xsengine	\
--	zylonite							\
-+	zylonite	akita	corgi					\
- "
- 
- LIST_ixp="ixdp425"
-diff -Nur u-boot-2006-04-18-1106/Makefile u-boot-2006-04-18-1106-new/Makefile
---- u-boot-2006-04-18-1106/Makefile	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/Makefile	2006-07-05 11:19:44.000000000 +0000
-@@ -61,7 +61,7 @@
- CROSS_COMPILE = powerpc-linux-
- endif
- ifeq ($(ARCH),arm)
--CROSS_COMPILE = arm-linux-
-+CROSS_COMPILE = armv5tel-linux-
- endif
- ifeq ($(ARCH),i386)
- ifeq ($(HOSTARCH),i386)
-@@ -1709,6 +1709,12 @@
- zylonite_config :
- 	@./mkconfig $(@:_config=) arm pxa zylonite
- 
-+akita_config 	:	unconfig
-+	@./mkconfig $(@:_config=) arm pxa akita
-+
-+corgi_config 	:	unconfig
-+	@./mkconfig $(@:_config=) arm pxa corgi
-+
- #########################################################################
- ## ARM1136 Systems
- #########################################################################
-diff -Nur u-boot-2006-04-18-1106/README u-boot-2006-04-18-1106-new/README
---- u-boot-2006-04-18-1106/README	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/README	2006-07-05 11:19:44.000000000 +0000
-@@ -311,7 +311,8 @@
- 		CONFIG_KB9202,		CONFIG_LART,		CONFIG_LPD7A400,
- 		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
- 		CONFIG_SHANNON,		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
--		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9
-+		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9,
-+		CONFIG_AKITA,		CONFIG_CORGI
- 
- 		MicroBlaze based boards:
- 		------------------------
-diff -Nur u-boot-2006-04-18-1106/board/akita/Makefile u-boot-2006-04-18-1106-new/board/akita/Makefile
---- u-boot-2006-04-18-1106/board/akita/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/Makefile	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,51 @@
-+#
-+# board/akita/Makefile
-+#
-+# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+#
-+# (C) Copyright 2000
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= akita.o nand.o kbd.o
-+SOBJS	:= lowlevel_init.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff -Nur u-boot-2006-04-18-1106/board/akita/akita.c u-boot-2006-04-18-1106-new/board/akita/akita.c
---- u-boot-2006-04-18-1106/board/akita/akita.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/akita.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,89 @@
-+/*
-+ * board/akita/akita.c
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+void set_turbo_mode(void);
-+
-+/* ------------------------------------------------------------------------- */
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	/* memory and cpu-speed are setup before relocation */
-+	/* so we do _nothing_ here */
-+
-+	/* arch number of Sharp Zaurus Akita : MACH_TYPE_AKITA */
-+	gd->bd->bi_arch_number = 744;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0xa0000100;
-+
-+	/* set cpu turbo mode */
-+	set_turbo_mode();
-+
-+	spitzkbd_init();
-+
-+	return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+	setenv("stdout", "serial");
-+	setenv("stderr", "serial");
-+	return 0;
-+}
-+
-+
-+int dram_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-+
-+	return 0;
-+}
-diff -Nur u-boot-2006-04-18-1106/board/akita/config.mk u-boot-2006-04-18-1106-new/board/akita/config.mk
---- u-boot-2006-04-18-1106/board/akita/config.mk	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/config.mk	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1 @@
-+TEXT_BASE = 0xa3000000
-diff -Nur u-boot-2006-04-18-1106/board/akita/kbd.c u-boot-2006-04-18-1106-new/board/akita/kbd.c
---- u-boot-2006-04-18-1106/board/akita/kbd.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/kbd.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,261 @@
-+/*
-+ * board/akita/kbd.c
-+ *
-+ * Keyboard driver for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from:
-+ *
-+ * linux/drivers/input/keyboard/spitzkbd.c
-+ *
-+ * Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series)
-+ *
-+ * Copyright (C) 2005 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GPIO_DFLT_LOW		0x400
-+#define GPIO_DFLT_HIGH		0x800
-+
-+void pxa_gpio_mode(int gpio_mode)
-+{
-+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-+	int gafr;
-+
-+	if (gpio_mode & GPIO_DFLT_LOW)
-+		GPCR(gpio) = GPIO_bit(gpio);
-+	else if (gpio_mode & GPIO_DFLT_HIGH)
-+		GPSR(gpio) = GPIO_bit(gpio);
-+	if (gpio_mode & GPIO_MD_MASK_DIR)
-+		GPDR(gpio) |= GPIO_bit(gpio);
-+	else
-+		GPDR(gpio) &= ~GPIO_bit(gpio);
-+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-+}
-+
-+#define SPITZ_KEY_STROBE_NUM         (11)
-+#define SPITZ_KEY_SENSE_NUM          (7)
-+
-+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
-+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
-+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
-+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
-+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
-+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
-+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
-+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
-+
-+#define SPITZ_GPIO_KEY_STROBE0       88
-+#define SPITZ_GPIO_KEY_STROBE1       23
-+#define SPITZ_GPIO_KEY_STROBE2       24
-+#define SPITZ_GPIO_KEY_STROBE3       25
-+#define SPITZ_GPIO_KEY_STROBE4       26
-+#define SPITZ_GPIO_KEY_STROBE5       27
-+#define SPITZ_GPIO_KEY_STROBE6       52
-+#define SPITZ_GPIO_KEY_STROBE7       103
-+#define SPITZ_GPIO_KEY_STROBE8       107
-+#define SPITZ_GPIO_KEY_STROBE9       108
-+#define SPITZ_GPIO_KEY_STROBE10      114
-+
-+#define SPITZ_GPIO_KEY_SENSE0        12
-+#define SPITZ_GPIO_KEY_SENSE1        17
-+#define SPITZ_GPIO_KEY_SENSE2        91
-+#define SPITZ_GPIO_KEY_SENSE3        34
-+#define SPITZ_GPIO_KEY_SENSE4        36
-+#define SPITZ_GPIO_KEY_SENSE5        38
-+#define SPITZ_GPIO_KEY_SENSE6        39
-+
-+#define SPITZ_GPIO_ON_KEY          (95)
-+
-+#define KB_ROWS			7
-+#define KB_COLS			11
-+#define KB_ROWMASK(r)		(1 << (r))
-+#define SCANCODE(r,c)		(((r)<<4) + (c) + 1)
-+#define	NR_SCANCODES		((KB_ROWS<<4) + 1)
-+
-+#define SCAN_INTERVAL		(50) /* ms */
-+#define HINGE_SCAN_INTERVAL	(150) /* ms */
-+
-+#define KB_DISCHARGE_DELAY	10
-+#define KB_ACTIVATE_DELAY	10
-+
-+static int spitz_strobes[] = {
-+	SPITZ_GPIO_KEY_STROBE0,
-+	SPITZ_GPIO_KEY_STROBE1,
-+	SPITZ_GPIO_KEY_STROBE2,
-+	SPITZ_GPIO_KEY_STROBE3,
-+	SPITZ_GPIO_KEY_STROBE4,
-+	SPITZ_GPIO_KEY_STROBE5,
-+	SPITZ_GPIO_KEY_STROBE6,
-+	SPITZ_GPIO_KEY_STROBE7,
-+	SPITZ_GPIO_KEY_STROBE8,
-+	SPITZ_GPIO_KEY_STROBE9,
-+	SPITZ_GPIO_KEY_STROBE10,
-+};
-+
-+static int spitz_senses[] = {
-+	SPITZ_GPIO_KEY_SENSE0,
-+	SPITZ_GPIO_KEY_SENSE1,
-+	SPITZ_GPIO_KEY_SENSE2,
-+	SPITZ_GPIO_KEY_SENSE3,
-+	SPITZ_GPIO_KEY_SENSE4,
-+	SPITZ_GPIO_KEY_SENSE5,
-+	SPITZ_GPIO_KEY_SENSE6,
-+};
-+
-+static inline void spitzkbd_discharge_all(void)
-+{
-+	/* STROBE All HiZ */
-+	GPCR0  =  SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-+	GPCR1  =  SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-+	GPCR2  =  SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-+	GPCR3  =  SPITZ_GPIO_G3_STROBE_BIT;
-+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-+}
-+
-+static inline void spitzkbd_activate_all(void)
-+{
-+	/* STROBE ALL -> High */
-+	GPSR0  =  SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR0 |=  SPITZ_GPIO_G0_STROBE_BIT;
-+	GPSR1  =  SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR1 |=  SPITZ_GPIO_G1_STROBE_BIT;
-+	GPSR2  =  SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR2 |=  SPITZ_GPIO_G2_STROBE_BIT;
-+	GPSR3  =  SPITZ_GPIO_G3_STROBE_BIT;
-+	GPDR3 |=  SPITZ_GPIO_G3_STROBE_BIT;
-+
-+	udelay(KB_DISCHARGE_DELAY);
-+}
-+
-+static inline void spitzkbd_activate_col(int col)
-+{
-+	int gpio = spitz_strobes[col];
-+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-+	GPSR(gpio) = GPIO_bit(gpio);
-+	GPDR(gpio) |= GPIO_bit(gpio);
-+}
-+
-+static inline void spitzkbd_reset_col(int col)
-+{
-+	int gpio = spitz_strobes[col];
-+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-+	GPCR(gpio) = GPIO_bit(gpio);
-+	GPDR(gpio) |= GPIO_bit(gpio);
-+}
-+
-+static inline int spitzkbd_get_row_status(int col)
-+{
-+	return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02)
-+		| ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08)
-+		| ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60);
-+}
-+
-+static int spitzkbd_scankeyboard(void)
-+{
-+	unsigned int row, col, rowd;
-+	unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0);
-+	int ret = -1;
-+
-+	num_pressed = 0;
-+	for (col = 0; col < KB_COLS; col++) {
-+		spitzkbd_discharge_all();
-+		udelay(KB_DISCHARGE_DELAY);
-+
-+		spitzkbd_activate_col(col);
-+		udelay(KB_ACTIVATE_DELAY);
-+
-+		rowd = spitzkbd_get_row_status(col);
-+		for (row = 0; row < KB_ROWS; row++) {
-+			unsigned int scancode, pressed;
-+
-+			scancode = SCANCODE(row, col);
-+			pressed = rowd & KB_ROWMASK(row);
-+
-+			if (pressed)
-+				ret = scancode;
-+		}
-+		spitzkbd_reset_col(col);
-+	}
-+
-+	spitzkbd_activate_all();
-+
-+	if (pwrkey)
-+		return -2;
-+	
-+	return ret;
-+}
-+
-+void spitzkbd_init(void)
-+{
-+	int i;
-+
-+	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
-+	for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++)
-+		pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
-+
-+	/* Set Strobe lines as outputs - set high */
-+	for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
-+		pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+	pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN);
-+}
-+
-+int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int scan;
-+	
-+	if (argc < 2)
-+		return 1;
-+
-+	scan = spitzkbd_scankeyboard();
-+
-+
-+//	if (scan >= 0)
-+//		printf("Scan = %d\n", scan);
-+//	else
-+//		printf("Nothing!\n");
-+
-+	return !(simple_strtol(argv[1], NULL, 10) == scan);
-+}
-+
-+U_BOOT_CMD(
-+	testkey,   2,      1,      do_testkey,
-+	"testkey - compare pressed key with arg\n",
-+	"<key scancode>"
-+);
-diff -Nur u-boot-2006-04-18-1106/board/akita/lowlevel_init.S u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S
---- u-boot-2006-04-18-1106/board/akita/lowlevel_init.S	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,135 @@
-+/*
-+ * board/akita/lowlevel_init.S
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * This was originally from the Lubbock u-boot port and from BLOB with cleanup
-+ *
-+ * NOTE: I haven't clean this up considerably, just enough to get it
-+ * running. See hal_platform_setup.h for the source. See
-+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
-+ * much cleaner.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+/* wait for coprocessor write complete */
-+   .macro CPWAIT reg
-+   mrc	p15,0,\reg,c2,c0,0
-+   mov	\reg,\reg
-+   sub	pc,pc,#4
-+   .endm
-+
-+/*********** Write out to HEX 7 segment leds *********/
-+
-+#undef DEBUG_HEXLOG
-+
-+#ifdef DEBUG_HEXLOG
-+#define LEDCTL		0x08000040
-+#define LEDDAT1	0x08000010
-+#define LEDDAT2	0x08000014
-+
-+.macro wait, count
-+	mov		r10, \count
-+0:
-+	subs	r10, r10, #1
-+	bne		0b
-+.endm
-+
-+.macro hexlog_init
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT1
-+	mov		r10, #0x0
-+	str		r10, [r11]
-+.endm
-+
-+.macro hexlog, val
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+
-+	ldr		r11, =LEDDAT1
-+	mov		r10, \val
-+	str		r10, [r11]
-+
-+	wait		#0x400000
-+.endm
-+
-+#else
-+
-+.macro hexlog_init
-+	nop
-+.endm
-+
-+.macro hexlog, val
-+	nop
-+.endm
-+
-+#endif
-+
-+/***********************************/
-+
-+/*
-+ *	Memory setup
-+ */
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+
-+	mov	pc, lr
-+
-+.globl set_turbo_mode
-+
-+set_turbo_mode:
-+	/* Turn on turbo mode */
-+	mrc	p14, 0, r2, c6, c0, 0
-+	orr	r2, r2, #0xB		/* Turbo, Fast-Bus, Freq change**/
-+	mcr	p14, 0, r2, c6, c0, 0
-+
-+	/* Setup vectors */
-+	ldr	r0, =TEXT_BASE
-+	ldr	r1, =TEXT_BASE+0x40
-+	ldr	r2, =0x0
-+1:
-+	ldr	r3, [r0]
-+	str	r3, [r2]
-+	add	r0, r0, #4
-+	add	r2, r2, #4
-+	cmp	r0, r1
-+	bne	1b
-+
-+	ldr	r0, =0x0
-+	ldr	r1, [r0, #4]
-+	str	r1, [r0]
-+
-+	mov	pc, lr
-diff -Nur u-boot-2006-04-18-1106/board/akita/nand.c u-boot-2006-04-18-1106-new/board/akita/nand.c
---- u-boot-2006-04-18-1106/board/akita/nand.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/nand.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,169 @@
-+/*
-+ * board/akita/nand.c
-+ *
-+ * NAND driver for the Sharp Zaurus SL-Cxx00.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from mtd nand driver:
-+ *
-+ * drivers/mtd/nand/sharpsl.c
-+ *
-+ * Copyright (C) 2004 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+
-+#include <nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+
-+static int sharpsl_io_base = CFG_NAND_BASE;
-+
-+/* register offset */
-+#define ECCLPLB	 	sharpsl_io_base+0x00	/* line parity 7 - 0 bit */
-+#define ECCLPUB	 	sharpsl_io_base+0x04	/* line parity 15 - 8 bit */
-+#define ECCCP	   	sharpsl_io_base+0x08	/* column parity 5 - 0 bit */
-+#define ECCCNTR	 	sharpsl_io_base+0x0C	/* ECC byte counter */
-+#define ECCCLRR	 	sharpsl_io_base+0x10	/* cleare ECC */
-+#define FLASHIO	 	sharpsl_io_base+0x14	/* Flash I/O */
-+#define FLASHCTL	sharpsl_io_base+0x18	/* Flash Control */
-+
-+/* Flash control bit */
-+#define FLRYBY		(1 << 5)
-+#define FLCE1		(1 << 4)
-+#define FLWP		(1 << 3)
-+#define FLALE		(1 << 2)
-+#define FLCLE		(1 << 1)
-+#define FLCE0		(1 << 0)
-+
-+#define readb(address) *((volatile unsigned char *)(address))
-+#define writeb(v, address) *((volatile unsigned char *)(address))=v
-+
-+/*
-+ *	hardware specific access to control-lines
-+ */
-+static void
-+sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
-+{
-+	switch (cmd) {
-+	case NAND_CTL_SETCLE:
-+		writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRCLE:
-+		writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETALE:
-+		writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRALE:
-+		writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETNCE:
-+		writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRNCE:
-+		writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	}
-+}
-+
-+static int
-+sharpsl_nand_dev_ready(struct mtd_info* mtd)
-+{
-+	return !((readb(FLASHCTL) & FLRYBY) == 0);
-+}
-+
-+static void
-+sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
-+{
-+	writeb(0 ,ECCCLRR);
-+}
-+
-+static int
-+sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
-+				u_char* ecc_code)
-+{
-+	ecc_code[0] = ~readb(ECCLPUB);
-+	ecc_code[1] = ~readb(ECCLPLB);
-+	ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
-+	return readb(ECCCNTR) != 0;
-+}
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr sharpsl_akita_bbt = {
-+	.options = 0,
-+	.offs = 4,
-+	.len = 1,
-+	.pattern = scan_ff_pattern
-+};
-+
-+static struct nand_oobinfo akita_oobinfo = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 24,
-+	.eccpos = {
-+		0x5,  0x1,  0x2,  0x3,  0x6,  0x7,  0x15, 0x11,
-+		0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-+		0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-+	.oobfree = { {0x08, 0x09} }
-+};
-+
-+/*
-+ * Board-specific NAND initialization. The following members of the
-+ * argument are board-specific (per include/linux/mtd/nand.h):
-+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
-+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
-+ * - hwcontrol: hardwarespecific function for accesing control-lines
-+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
-+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
-+ *   only be provided if a hardware ECC is available
-+ * - eccmode: mode of ecc, see defines
-+ * - chip_delay: chip dependent delay for transfering data from array to
-+ *   read regs (tR)
-+ * - options: various chip options. They can partly be set to inform
-+ *   nand_scan about special functionality. See the defines for further
-+ *   explanation
-+ * Members with a "?" were not set in the merged testing-NAND branch,
-+ * so they are not set here either.
-+ */
-+void board_nand_init(struct nand_chip *nand)
-+{
-+	writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
-+
-+	nand->IO_ADDR_R = FLASHIO;
-+	nand->IO_ADDR_W = FLASHIO;
-+	nand->hwcontrol = sharpsl_nand_hwcontrol;
-+	nand->dev_ready = sharpsl_nand_dev_ready;
-+	nand->eccmode = NAND_ECC_HW3_256;
-+	nand->chip_delay = 15;
-+	nand->options = NAND_SAMSUNG_LP_OPTIONS;
-+	nand->badblock_pattern = &sharpsl_akita_bbt;
-+	nand->autooob = &akita_oobinfo;
-+	nand->enable_hwecc = sharpsl_nand_enable_hwecc;
-+	nand->calculate_ecc = sharpsl_nand_calculate_ecc;
-+	nand->correct_data = nand_correct_data;
-+}
-+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
-diff -Nur u-boot-2006-04-18-1106/board/akita/u-boot.lds u-boot-2006-04-18-1106-new/board/akita/u-boot.lds
---- u-boot-2006-04-18-1106/board/akita/u-boot.lds	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/akita/u-boot.lds	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2000
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/pxa/start.o	(.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-diff -Nur u-boot-2006-04-18-1106/board/corgi/Makefile u-boot-2006-04-18-1106-new/board/corgi/Makefile
---- u-boot-2006-04-18-1106/board/corgi/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/Makefile	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,51 @@
-+#
-+# board/corgi/Makefile
-+#
-+# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+#
-+# (C) Copyright 2000
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= corgi.o nand.o kbd.o
-+SOBJS	:= lowlevel_init.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff -Nur u-boot-2006-04-18-1106/board/corgi/config.mk u-boot-2006-04-18-1106-new/board/corgi/config.mk
---- u-boot-2006-04-18-1106/board/corgi/config.mk	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/config.mk	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1 @@
-+TEXT_BASE = 0xa1000000
-diff -Nur u-boot-2006-04-18-1106/board/corgi/corgi.c u-boot-2006-04-18-1106-new/board/corgi/corgi.c
---- u-boot-2006-04-18-1106/board/corgi/corgi.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/corgi.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,87 @@
-+/*
-+ * board/corgi/corgi.c
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+/* ------------------------------------------------------------------------- */
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	/* memory and cpu-speed are setup before relocation */
-+	/* so we do _nothing_ here */
-+
-+	/* arch number of Sharp Zaurus Corgi : MACH_TYPE_CORGI */
-+	gd->bd->bi_arch_number = 423;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0xa0000100;
-+
-+	/* set cpu turbo mode */
-+	set_turbo_mode();
-+
-+	corgikbd_init();
-+
-+	return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+	setenv("stdout", "serial");
-+	setenv("stderr", "serial");
-+	return 0;
-+}
-+
-+
-+int dram_init (void)
-+{
-+	DECLARE_GLOBAL_DATA_PTR;
-+
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-+
-+	return 0;
-+}
-diff -Nur u-boot-2006-04-18-1106/board/corgi/kbd.c u-boot-2006-04-18-1106-new/board/corgi/kbd.c
---- u-boot-2006-04-18-1106/board/corgi/kbd.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/kbd.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,202 @@
-+/*
-+ * board/corgi/kbd.c
-+ *
-+ * Keyboard driver for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from:
-+ *
-+ * linux/drivers/input/keyboard/spitzkbd.c
-+ *
-+ * Keyboard driver for Sharp Corgi models (SL-C7xx)
-+ *
-+ * Copyright (C) 2005 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GPIO_DFLT_LOW		0x400
-+#define GPIO_DFLT_HIGH		0x800
-+
-+void pxa_gpio_mode(int gpio_mode)
-+{
-+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-+	int gafr;
-+
-+	if (gpio_mode & GPIO_DFLT_LOW)
-+		GPCR(gpio) = GPIO_bit(gpio);
-+	else if (gpio_mode & GPIO_DFLT_HIGH)
-+		GPSR(gpio) = GPIO_bit(gpio);
-+	if (gpio_mode & GPIO_MD_MASK_DIR)
-+		GPDR(gpio) |= GPIO_bit(gpio);
-+	else
-+		GPDR(gpio) &= ~GPIO_bit(gpio);
-+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-+}
-+
-+/*
-+ * Corgi Keyboard Definitions
-+ */
-+#define CORGI_KEY_STROBE_NUM		(12)
-+#define CORGI_KEY_SENSE_NUM			(8)
-+#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-+#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-+#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-+#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-+#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-+#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-+#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-+#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-+#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-+#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-+#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-+#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-+
-+#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-+
-+#define KB_ROWS				8
-+#define KB_COLS				12
-+#define KB_ROWMASK(r)		(1 << (r))
-+#define SCANCODE(r,c)		( ((r)<<4) + (c) + 1 )
-+/* zero code, 124 scancodes */
-+#define	NR_SCANCODES		( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 )
-+
-+#define SCAN_INTERVAL		(50) /* ms */
-+#define HINGE_SCAN_INTERVAL	(250) /* ms */
-+
-+#define KB_DISCHARGE_DELAY	10
-+#define KB_ACTIVATE_DELAY	10
-+
-+static inline void corgikbd_discharge_all(void)
-+{
-+	/* STROBE All HiZ */
-+	GPCR2  = CORGI_GPIO_ALL_STROBE_BIT;
-+	GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT;
-+}
-+
-+static inline void corgikbd_activate_all(void)
-+{
-+	/* STROBE ALL -> High */
-+	GPSR2  = CORGI_GPIO_ALL_STROBE_BIT;
-+	GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT;
-+
-+	udelay(KB_DISCHARGE_DELAY);
-+
-+	/* Clear any interrupts we may have triggered when altering the GPIO lines */
-+	GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT;
-+	GEDR2 = CORGI_GPIO_LOW_SENSE_BIT;
-+}
-+
-+static inline void corgikbd_activate_col(int col)
-+{
-+	/* STROBE col -> High, not col -> HiZ */
-+	GPSR2 = CORGI_GPIO_STROBE_BIT(col);
-+	GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col);
-+}
-+
-+static inline void corgikbd_reset_col(int col)
-+{
-+	/* STROBE col -> Low */
-+	GPCR2 = CORGI_GPIO_STROBE_BIT(col);
-+	/* STROBE col -> out, not col -> HiZ */
-+	GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col);
-+}
-+
-+#define GET_ROWS_STATUS(c)	(((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT))
-+
-+static int corgikbd_scankeyboard(void)
-+{
-+	unsigned int row, col, rowd;
-+	unsigned int num_pressed;
-+	int ret = -1;
-+
-+	num_pressed = 0;
-+	for (col = 0; col < KB_COLS; col++) {
-+		corgikbd_discharge_all();
-+		udelay(KB_DISCHARGE_DELAY);
-+
-+		corgikbd_activate_col(col);
-+		udelay(KB_ACTIVATE_DELAY);
-+
-+		rowd = GET_ROWS_STATUS(col);
-+		for (row = 0; row < KB_ROWS; row++) {
-+			unsigned int scancode, pressed;
-+
-+			scancode = SCANCODE(row, col);
-+			pressed = rowd & KB_ROWMASK(row);
-+
-+			if (pressed)
-+			    ret = scancode;
-+		}
-+		corgikbd_reset_col(col);
-+	}
-+
-+	corgikbd_activate_all();
-+
-+	return ret;
-+}
-+
-+void corgikbd_init(void)
-+{
-+	int i;
-+	
-+	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
-+	for (i = 0; i < CORGI_KEY_SENSE_NUM; i++)
-+		pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
-+
-+	/* Set Strobe lines as outputs - set high */
-+	for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
-+		pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+	/* Setup the headphone jack as an input */
-+	pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
-+}
-+
-+int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int scan;
-+	
-+	if (argc < 2)
-+		return 1;
-+
-+	scan = corgikbd_scankeyboard();
-+
-+
-+//	if (scan >= 0)
-+//		printf("Scan = %d\n", scan);
-+//	else
-+//		printf("Nothing!\n");
-+
-+	return !(simple_strtol(argv[1], NULL, 10) == scan);
-+}
-+
-+U_BOOT_CMD(
-+	testkey,   2,      1,      do_testkey,
-+	"testkey - compare pressed key with arg\n",
-+	"<key scancode>"
-+);
-diff -Nur u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S
---- u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,136 @@
-+/*
-+ * board/corgi/lowlevel_init.S
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * This was originally from the Lubbock u-boot port and from BLOB with cleanup
-+ *
-+ * NOTE: I haven't clean this up considerably, just enough to get it
-+ * running. See hal_platform_setup.h for the source. See
-+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
-+ * much cleaner.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <version.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+/* wait for coprocessor write complete */
-+   .macro CPWAIT reg
-+   mrc	p15,0,\reg,c2,c0,0
-+   mov	\reg,\reg
-+   sub	pc,pc,#4
-+   .endm
-+
-+/*********** Write out to HEX 7 segment leds *********/
-+
-+#undef DEBUG_HEXLOG
-+
-+#ifdef DEBUG_HEXLOG
-+#define LEDCTL		0x08000040
-+#define LEDDAT1	0x08000010
-+#define LEDDAT2	0x08000014
-+
-+.macro wait, count
-+	mov		r10, \count
-+0:
-+	subs	r10, r10, #1
-+	bne		0b
-+.endm
-+
-+.macro hexlog_init
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT1
-+	mov		r10, #0x0
-+	str		r10, [r11]
-+.endm
-+
-+.macro hexlog, val
-+	ldr		r11, =LEDCTL
-+	mov		r10, #0xff
-+	str		r10, [r11]
-+	ldr		r11, =LEDDAT2
-+	mov		r10, #0xFFFFFFFF
-+	str		r10, [r11]
-+
-+	ldr		r11, =LEDDAT1
-+	mov		r10, \val
-+	str		r10, [r11]
-+
-+	wait		#0x400000
-+.endm
-+
-+#else
-+
-+.macro hexlog_init
-+	nop
-+.endm
-+
-+.macro hexlog, val
-+	nop
-+.endm
-+
-+#endif
-+
-+/***********************************/
-+
-+/*
-+ *	Memory setup
-+ */
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+
-+	mov	pc, lr
-+
-+.globl set_turbo_mode
-+
-+set_turbo_mode:
-+	/* Turn on turbo mode */
-+	mrc	p14, 0, r2, c6, c0, 0
-+	orr	r2, r2, #0x3		/* Turbo, Freq change */
-+	mcr	p14, 0, r2, c6, c0, 0
-+
-+
-+	/* Setup vectors */
-+	ldr	r0, =TEXT_BASE
-+	ldr	r1, =TEXT_BASE+0x40
-+	ldr	r2, =0x0
-+1:
-+	ldr	r3, [r0]
-+	str	r3, [r2]
-+	add	r0, r0, #4
-+	add	r2, r2, #4
-+	cmp	r0, r1
-+	bne	1b
-+
-+	ldr	r0, =0x0
-+	ldr	r1, [r0, #4]
-+	str	r1, [r0]
-+
-+	mov	pc, lr
-diff -Nur u-boot-2006-04-18-1106/board/corgi/nand.c u-boot-2006-04-18-1106-new/board/corgi/nand.c
---- u-boot-2006-04-18-1106/board/corgi/nand.c	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/nand.c	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,157 @@
-+/*
-+ * board/corgi/nand.c
-+ *
-+ * NAND driver for the Sharp Zaurus SL-C7x0/860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from mtd nand driver:
-+ *
-+ * drivers/mtd/nand/sharpsl.c
-+ *
-+ * Copyright (C) 2004 Richard Purdie
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+
-+#include <nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+
-+static int sharpsl_io_base = CFG_NAND_BASE;
-+
-+/* register offset */
-+#define ECCLPLB	 	sharpsl_io_base+0x00	/* line parity 7 - 0 bit */
-+#define ECCLPUB	 	sharpsl_io_base+0x04	/* line parity 15 - 8 bit */
-+#define ECCCP	   	sharpsl_io_base+0x08	/* column parity 5 - 0 bit */
-+#define ECCCNTR	 	sharpsl_io_base+0x0C	/* ECC byte counter */
-+#define ECCCLRR	 	sharpsl_io_base+0x10	/* cleare ECC */
-+#define FLASHIO	 	sharpsl_io_base+0x14	/* Flash I/O */
-+#define FLASHCTL	sharpsl_io_base+0x18	/* Flash Control */
-+
-+/* Flash control bit */
-+#define FLRYBY		(1 << 5)
-+#define FLCE1		(1 << 4)
-+#define FLWP		(1 << 3)
-+#define FLALE		(1 << 2)
-+#define FLCLE		(1 << 1)
-+#define FLCE0		(1 << 0)
-+
-+#define readb(address) *((volatile unsigned char *)(address))
-+#define writeb(v, address) *((volatile unsigned char *)(address))=v
-+
-+/*
-+ *	hardware specific access to control-lines
-+ */
-+static void
-+sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
-+{
-+	switch (cmd) {
-+	case NAND_CTL_SETCLE:
-+		writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRCLE:
-+		writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETALE:
-+		writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRALE:
-+		writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
-+		break;
-+
-+	case NAND_CTL_SETNCE:
-+		writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	case NAND_CTL_CLRNCE:
-+		writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
-+		break;
-+	}
-+}
-+
-+static int
-+sharpsl_nand_dev_ready(struct mtd_info* mtd)
-+{
-+	return !((readb(FLASHCTL) & FLRYBY) == 0);
-+}
-+
-+static void
-+sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
-+{
-+	writeb(0 ,ECCCLRR);
-+}
-+
-+static int
-+sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
-+				u_char* ecc_code)
-+{
-+	ecc_code[0] = ~readb(ECCLPUB);
-+	ecc_code[1] = ~readb(ECCLPLB);
-+	ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
-+	return readb(ECCCNTR) != 0;
-+}
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr sharpsl_bbt = {
-+	.options = 0,
-+	.offs = 4,
-+	.len = 2,
-+	.pattern = scan_ff_pattern
-+};
-+
-+/*
-+ * Board-specific NAND initialization. The following members of the
-+ * argument are board-specific (per include/linux/mtd/nand.h):
-+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
-+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
-+ * - hwcontrol: hardwarespecific function for accesing control-lines
-+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
-+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
-+ *   only be provided if a hardware ECC is available
-+ * - eccmode: mode of ecc, see defines
-+ * - chip_delay: chip dependent delay for transfering data from array to
-+ *   read regs (tR)
-+ * - options: various chip options. They can partly be set to inform
-+ *   nand_scan about special functionality. See the defines for further
-+ *   explanation
-+ * Members with a "?" were not set in the merged testing-NAND branch,
-+ * so they are not set here either.
-+ */
-+void board_nand_init(struct nand_chip *nand)
-+{
-+	writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
-+
-+	nand->IO_ADDR_R = FLASHIO;
-+	nand->IO_ADDR_W = FLASHIO;
-+	nand->hwcontrol = sharpsl_nand_hwcontrol;
-+	nand->dev_ready = sharpsl_nand_dev_ready;
-+	nand->eccmode = NAND_ECC_HW3_256;
-+	nand->chip_delay = 15;
-+	nand->badblock_pattern = &sharpsl_bbt;
-+	nand->enable_hwecc = sharpsl_nand_enable_hwecc;
-+	nand->calculate_ecc = sharpsl_nand_calculate_ecc;
-+	nand->correct_data = nand_correct_data;
-+}
-+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
-diff -Nur u-boot-2006-04-18-1106/board/corgi/u-boot.lds u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds
---- u-boot-2006-04-18-1106/board/corgi/u-boot.lds	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds	2006-07-05 11:19:44.000000000 +0000
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2000
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/pxa/start.o	(.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-diff -Nur u-boot-2006-04-18-1106/common/cmd_nand.c u-boot-2006-04-18-1106-new/common/cmd_nand.c
---- u-boot-2006-04-18-1106/common/cmd_nand.c	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/common/cmd_nand.c	2006-07-05 11:19:44.000000000 +0000
-@@ -81,6 +81,63 @@
- 	return 0;
- }
- 
-+#ifdef NAND_LOGICAL
-+/////////////////////////////////////////////////////////////////////
-+// oob structure
-+/////////////////////////////////////////////////////////////////////
-+
-+#define NAND_NOOB_LOGADDR_00		8
-+#define NAND_NOOB_LOGADDR_01		9
-+#define NAND_NOOB_LOGADDR_10		10
-+#define NAND_NOOB_LOGADDR_11		11
-+#define NAND_NOOB_LOGADDR_20		12
-+#define NAND_NOOB_LOGADDR_21		13
-+
-+static uint nand_get_logical_no(unsigned char *oob)
-+{
-+    unsigned short us,bit;
-+    int par;
-+    int good0, good1;
-+
-+    if(oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] &&
-+       oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]){
-+	good0 = NAND_NOOB_LOGADDR_00;
-+	good1 = NAND_NOOB_LOGADDR_01;
-+    }else
-+    if(oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] &&
-+       oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]){
-+	good0 = NAND_NOOB_LOGADDR_10;
-+	good1 = NAND_NOOB_LOGADDR_11;
-+    }else
-+    if(oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] &&
-+       oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]){
-+	good0 = NAND_NOOB_LOGADDR_20;
-+	good1 = NAND_NOOB_LOGADDR_21;
-+    }else{
-+	return (uint)-1;
-+    }
-+
-+    us = (((unsigned short)(oob[good0]) & 0x00ff) << 0) |
-+	 (((unsigned short)(oob[good1]) & 0x00ff) << 8);
-+
-+    par = 0;
-+    for(bit = 0x0001; bit != 0; bit <<= 1){
-+	if(us & bit){
-+	    par++;
-+	}
-+    }
-+    if(par & 1){
-+	return (uint)-2;
-+    }
-+
-+    if(us == 0xffff){
-+	return 0xffff;
-+    }else{
-+	return ((us & 0x07fe) >> 1);
-+    }
-+}
-+#endif
-+
- /* ------------------------------------------------------------------------- */
- 
- static void
-@@ -245,6 +302,55 @@
- 		if (off == 0 && size == 0)
- 			return 1;
- 
-+#ifdef NAND_LOGICAL
-+		s = strchr(cmd, '.');
-+		if (s != NULL) {
-+			if (strcmp(s, ".logical") == 0) {
-+				int blocks = NAND_LOGICAL_SIZE / nand->erasesize;
-+				ulong *log2phy = malloc(blocks * sizeof(ulong));
-+				u_char *oobuf = malloc(nand->oobblock + nand->oobsize);
-+				int i;
-+				ulong offset;
-+				ret = 1;
-+				for (i = 0; i < blocks; i++)
-+					log2phy[i] = (uint) -1;
-+				offset = 0;
-+				for (i = 0; i < blocks; i++) {
-+					ret = nand_read_raw(nand, oobuf, offset, nand->oobblock, nand->oobsize);
-+					if (!ret) {
-+						int log_no = nand_get_logical_no(oobuf + nand->oobblock);
-+						if (((int)log_no >= 0) && (log_no < blocks)) {
-+							log2phy[log_no] = offset;
-+							//printf("NAND logical - %08X -> %04X\n", offset, log_no);
-+						}
-+					}
-+					offset += nand->erasesize;
-+				}
-+				
-+				for (i = 0; i < size / nand->erasesize; i++) {
-+					ulong sz = nand->erasesize;
-+					offset = log2phy[off / nand->erasesize];
-+					if ((int)offset < 0) {
-+					        printf("NAND logical - offset %08X not found\n", off);
-+						return 1;
-+					}
-+					//printf("NAND logical - %04X -> %08X\n", off / nand->erasesize, offset);
-+					ret = nand_read(nand, offset, &sz, (u_char *)addr);
-+					if (ret) {
-+						printf("NAND logical - offset %08X, read error\n", off);
-+						return 1;
-+					}
-+					off += nand->erasesize;
-+					addr += nand->erasesize;
-+				}
-+				printf(" %d bytes read from NAND logical\n", size);
-+				free(oobuf);
-+				free(log2phy);
-+				return ret == 0 ? 0 : 1;
-+			}
-+		}
-+#endif
-+
- 		i = strncmp(cmd, "read", 4) == 0;	/* 1 = read, 0 = write */
- 		printf("\nNAND %s: device %d offset %u, size %u ... ",
- 		       i ? "read" : "write", nand_curr_device, off, size);
-diff -Nur u-boot-2006-04-18-1106/cpu/pxa/config.mk u-boot-2006-04-18-1106-new/cpu/pxa/config.mk
---- u-boot-2006-04-18-1106/cpu/pxa/config.mk	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/cpu/pxa/config.mk	2006-07-05 11:19:44.000000000 +0000
-@@ -22,8 +22,7 @@
- # MA 02111-1307 USA
- #
- 
--PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
--	-msoft-float
-+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 -fomit-frame-pointer
- 
- #PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100
- PLATFORM_CPPFLAGS += -march=armv5 -mtune=xscale
-@@ -32,5 +31,5 @@
- # Supply options according to compiler version
- #
- # ========================================================================
--PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
-+#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
- PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
-diff -Nur u-boot-2006-04-18-1106/cpu/pxa/start.S u-boot-2006-04-18-1106-new/cpu/pxa/start.S
---- u-boot-2006-04-18-1106/cpu/pxa/start.S	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/cpu/pxa/start.S	2006-07-05 11:19:44.000000000 +0000
-@@ -42,6 +42,7 @@
- 	ldr	pc, _irq
- 	ldr	pc, _fiq
- 
-+_reset:			.word reset
- _undefined_instruction: .word undefined_instruction
- _software_interrupt:	.word software_interrupt
- _prefetch_abort:	.word prefetch_abort
-diff -Nur u-boot-2006-04-18-1106/fs/cramfs/cramfs.c u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c
---- u-boot-2006-04-18-1106/fs/cramfs/cramfs.c	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c	2006-07-05 11:19:44.000000000 +0000
-@@ -44,8 +44,13 @@
- 
- /* CPU address space offset calculation macro, struct part_info offset is
-  * device address space offset, so we need to shift it by a device start address. */
-+#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
- extern flash_info_t flash_info[];
- #define PART_OFFSET(x)	(x->offset + flash_info[x->dev->id->num].start[0])
-+#else
-+static struct cramfs_super super_fake;
-+#define PART_OFFSET(x)	(&super_fake)
-+#endif
- 
- static int cramfs_read_super (struct part_info *info)
- {
-diff -Nur u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h
---- u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h	2006-04-18 09:05:03.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h	2006-07-05 11:19:44.000000000 +0000
-@@ -1269,15 +1269,16 @@
- #define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
- #define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
- 
--#define GPLR(x)		((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3)
--#define GPDR(x)		((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3)
--#define GPSR(x)		((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3)
--#define GPCR(x)		((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3)
--#define GRER(x)		((((x) & 0x7f) < 96) ? _GRER(x) : GRER3)
--#define GFER(x)		((((x) & 0x7f) < 96) ? _GFER(x) : GFER3)
--#define GEDR(x)		((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3)
--#define GAFR(x)		((((x) & 0x7f) < 96) ? _GAFR(x) : \
--			 ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U))
-+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-+
- #else
- 
- #define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
-diff -Nur u-boot-2006-04-18-1106/include/configs/akita.h u-boot-2006-04-18-1106-new/include/configs/akita.h
---- u-boot-2006-04-18-1106/include/configs/akita.h	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/include/configs/akita.h	2006-07-13 11:00:46.000000000 +0000
-@@ -0,0 +1,324 @@
-+/*
-+ * include/configs/akita.h
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C1000/C3100.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+
-+#undef SKIP_CONFIG_RELOCATE_UBOOT
-+
-+#undef CONFIG_HARD_I2C
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_PXA27X		1	/* This is an PXA27x CPU */
-+#define CONFIG_AKITA		1	/* on Sharp Zaurus Akita */
-+//#define CONFIG_MMC			1
-+#define BOARD_LATE_INIT		1
-+
-+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-+
-+#define RTC			1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+//#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 256*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_FFUART	       1       /* we use FFUART on Mainstone */
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_BAUDRATE	       115200
-+//#define CONFIG_DOS_PARTITION   1
-+
-+#undef CONFIG_SHOW_BOOT_PROGRESS
-+
-+#if 1
-+#define	CONFIG_BOOTDELAY	1
-+#define CONFIG_AUTOBOOT_PROMPT  "Autobooting in %d seconds\n"
-+
-+#define	CONFIG_BOOTCOMMAND						\
-+	"if testkey 101 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x00060000 0x00540000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 2 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 18 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; "	 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 3 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa1000000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; "	 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"nand read.logical 0xa1000000 0x005a0000 0x00160000; "								\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " 	\
-+	"bootm; "
-+#else
-+#define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
-+#endif
-+
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192"
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-+#define CONFIG_INITRD_TAG	 1
-+
-+#define CONFIG_COMMANDS		((				\
-+				    CONFIG_CMD_DFL 	| 	\
-+				    CFG_CMD_NAND 	|	\
-+				    CFG_CMD_JFFS2	 	\
-+				    ) & ~(			\
-+				    CFG_CMD_NET 	| 	\
-+				    CFG_CMD_FLASH 	| 	\
-+				    CFG_CMD_IMLS 	 	\
-+				))
-+
-+//				    CFG_CMD_ENV
-+			
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_HUSH_PARSER		1
-+#define CFG_PROMPT_HUSH_PS2	"> "
-+
-+#define CFG_LONGHELP				/* undef to save memory		*/
-+#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+
-+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS		16		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+#define CFG_DEVICE_NULLDEV	1
-+
-+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-+
-+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR		0xa1000000	/* default load address */
-+
-+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-+#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
-+
-+						/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+#define CFG_MMC_BASE		0xF0000000
-+
-+/*
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+/*
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
-+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
-+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
-+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
-+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
-+
-+#define PHYS_FLASH_1		0xd4000000 /* Flash Bank #1 */
-+
-+#define CFG_DRAM_BASE		0xa0000000
-+#define CFG_DRAM_SIZE		0x04000000
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*
-+ * GPIO settings for Mainstone
-+ */
-+
-+#define CFG_GPSR0_VAL		0x00708800
-+#define CFG_GPSR1_VAL		0x03cf0002
-+#define CFG_GPSR2_VAL		0x0021FC00
-+#define CFG_GPSR3_VAL		0x00000000
-+
-+#define CFG_GPCR0_VAL		0x00001000
-+#define CFG_GPCR1_VAL		0x00000000
-+#define CFG_GPCR2_VAL		0x00000000
-+#define CFG_GPCR3_VAL		0x00000000
-+
-+#define CFG_GPDR0_VAL		0xC27B9C04
-+#define CFG_GPDR1_VAL		0x00EFAA83
-+#define CFG_GPDR2_VAL		0x0E23FC00
-+#define CFG_GPDR3_VAL		0x001E1F81
-+
-+#define CFG_GAFR0_L_VAL		0x94F00000
-+#define CFG_GAFR0_U_VAL		0x015A859A
-+#define CFG_GAFR1_L_VAL		0x999A955A
-+#define CFG_GAFR1_U_VAL		0x0005A4AA
-+#define CFG_GAFR2_L_VAL		0x6AA00000
-+#define CFG_GAFR2_U_VAL		0x55A8041A
-+#define CFG_GAFR3_L_VAL		0x56AA955A
-+#define CFG_GAFR3_U_VAL		0x00000001
-+
-+#define CFG_PSSR_VAL		0x20	// ???????????
-+
-+/*
-+ * PCMCIA and CF Interfaces
-+ */
-+#define CFG_MECR_VAL		0x00000001
-+#define CFG_MCMEM0_VAL		0x00010204
-+#define CFG_MCMEM1_VAL		0x00010204
-+#define CFG_MCATT0_VAL		0x00010204
-+#define CFG_MCATT1_VAL		0x00010204
-+#define CFG_MCIO0_VAL		0x0000c108
-+#define CFG_MCIO1_VAL		0x0001c108
-+
-+//#define CONFIG_PXA_PCMCIA 1
-+//#define CONFIG_PXA_IDE 1
-+
-+#define CONFIG_PCMCIA_SLOT_A 1
-+/* just to keep build system happy  */
-+
-+#define CFG_PCMCIA_MEM_ADDR     0x28000000
-+#define CFG_PCMCIA_MEM_SIZE     0x04000000
-+
-+#define CFG_IDE_MAXBUS		1
-+/* max. 1 IDE bus		*/
-+#define CFG_IDE_MAXDEVICE	1
-+/* max. 1 drive per IDE bus	*/
-+
-+#define CFG_ATA_IDE0_OFFSET	0x0000
-+
-+#define CFG_ATA_BASE_ADDR	0x20000000
-+
-+/* Offset for data I/O			*/
-+#define CFG_ATA_DATA_OFFSET	0x1f0
-+
-+/* Offset for normal register accesses	*/
-+#define CFG_ATA_REG_OFFSET	0x1f0
-+
-+/* Offset for alternate registers	*/
-+#define CFG_ATA_ALT_OFFSET	0x3f0
-+
-+#define CFG_NO_FLASH 1
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-+
-+/*-----------------------------------------------------------------------
-+ * NAND-FLASH stuff
-+ *-----------------------------------------------------------------------
-+ */
-+#undef CFG_NAND_LEGACY
-+
-+/* NAND debugging */
-+//#define CONFIG_MTD_DEBUG
-+//#define CONFIG_MTD_DEBUG_VERBOSE 3
-+
-+#define CFG_NAND_BASE		0xd4000000
-+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define NAND_MAX_CHIPS 		1
-+
-+//#define CONFIG_MTD_NAND_VERIFY_WRITE 1  /* verify all writes!!!         */
-+//#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
-+
-+#define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-+#define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
-+
-+/*
-+ * JFFS2 partitions
-+ *
-+ */
-+/* No command line, one static partition */
-+//#undef CONFIG_JFFS2_CMDLINE
-+//#define CONFIG_JFFS2_DEV		"nand0"
-+//#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-+//#define CONFIG_JFFS2_PART_OFFSET	0x00060000
-+
-+/* mtdparts command line support */
-+/* Note: fake mtd_id used, no linux mtd map file */
-+
-+#define CONFIG_JFFS2_CMDLINE
-+#define MTDIDS_DEFAULT		"nand0=laze-0"
-+//#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+
-+/*
-+ * SHARP SL NAND logical partition
-+ */
-+#define NAND_LOGICAL		1
-+#define NAND_LOGICAL_SIZE	0x700000
-+
-+/*
-+ * Environment
-+ */
-+
-+#define CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_OFFSET		0x40000
-+//#define CFG_ENV_OFFSET_REDUND	0x44000
-+#define CFG_ENV_SIZE		0x20000
-+
-+#endif	/* __CONFIG_H */
-diff -Nur u-boot-2006-04-18-1106/include/configs/corgi.h u-boot-2006-04-18-1106-new/include/configs/corgi.h
---- u-boot-2006-04-18-1106/include/configs/corgi.h	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot-2006-04-18-1106-new/include/configs/corgi.h	2006-07-13 11:19:04.000000000 +0000
-@@ -0,0 +1,326 @@
-+/*
-+ * include/configs/corgi.h
-+ *
-+ * Configuration settings for the Sharp Zaurus SL-C7x0/C860.
-+ *
-+ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org>
-+ *
-+ * portions from adsvix board configuration:
-+ * (C) Copyright 2004
-+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
-+ * (C) Copyright 2002
-+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+
-+#undef SKIP_CONFIG_RELOCATE_UBOOT
-+
-+#undef CONFIG_HARD_I2C
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_PXA250		1	/* This is an PXA255 CPU    */
-+#define CONFIG_CORGI		1	/* on Sharp Zaurus Corgi    */
-+//#define CONFIG_MMC			1
-+#define BOARD_LATE_INIT		1
-+
-+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-+
-+#define RTC			1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+//#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 256*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_FFUART	       1       /* we use FFUART on Mainstone */
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_BAUDRATE	       115200
-+//#define CONFIG_DOS_PARTITION   1
-+
-+#undef CONFIG_SHOW_BOOT_PROGRESS
-+
-+#if 1
-+#define	CONFIG_BOOTDELAY	1
-+#define CONFIG_AUTOBOOT_PROMPT  "Autobooting in %d seconds\n"
-+
-+#define	CONFIG_BOOTCOMMAND						\
-+	"if testkey 101 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x00060000 0x00540000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 2 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " 				\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 18 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; "			 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"if testkey 3 ; "												\
-+	"then "														\
-+		"nand read.logical 0xa0800000 0x005a0000 0x00160000; "							\
-+		"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; "			 		\
-+		"bootm; "												\
-+	"fi; "														\
-+	"nand read.logical 0xa0800000 0x005a0000 0x00160000; "								\
-+	"setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " 			\
-+	"bootm; "
-+#else
-+#define CONFIG_BOOTCOMMAND	"" // "run boot_flash"
-+#endif
-+
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192"
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-+#define CONFIG_INITRD_TAG	 1
-+
-+#define CONFIG_COMMANDS		((				\
-+				    CONFIG_CMD_DFL 	| 	\
-+				    CFG_CMD_NAND 	|	\
-+				    CFG_CMD_JFFS2	 	\
-+				    ) & ~(			\
-+				    CFG_CMD_NET 	| 	\
-+				    CFG_CMD_FLASH 	| 	\
-+				    CFG_CMD_IMLS 	 	\
-+				))
-+
-+//				    CFG_CMD_ENV
-+			
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_HUSH_PARSER		1
-+#define CFG_PROMPT_HUSH_PS2	"> "
-+
-+#define CFG_LONGHELP				/* undef to save memory		*/
-+#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+
-+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS		16		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+#define CFG_DEVICE_NULLDEV	1
-+
-+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-+
-+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR		0xa0800000	/* default load address */
-+
-+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-+#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
-+
-+						/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+#define CFG_MMC_BASE		0xF0000000
-+
-+/*
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+/*
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
-+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
-+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
-+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
-+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
-+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
-+
-+#define PHYS_FLASH_1		0xd4000000 /* Flash Bank #1 */
-+
-+#define CFG_DRAM_BASE		0xa0000000
-+#define CFG_DRAM_SIZE		0x04000000
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*
-+ * GPIO settings for Mainstone
-+ */
-+
-+#define CFG_GPSR0_VAL		0x00708800
-+#define CFG_GPSR1_VAL		0x03cf0002
-+#define CFG_GPSR2_VAL		0x0021FC00
-+#define CFG_GPSR3_VAL		0x00000000
-+
-+#define CFG_GPCR0_VAL		0x00001000
-+#define CFG_GPCR1_VAL		0x00000000
-+#define CFG_GPCR2_VAL		0x00000000
-+#define CFG_GPCR3_VAL		0x00000000
-+
-+#define CFG_GPDR0_VAL		0xC27B9C04
-+#define CFG_GPDR1_VAL		0x00EFAA83
-+#define CFG_GPDR2_VAL		0x0E23FC00
-+#define CFG_GPDR3_VAL		0x001E1F81
-+
-+#define CFG_GAFR0_L_VAL		0x94F00000
-+#define CFG_GAFR0_U_VAL		0x015A859A
-+#define CFG_GAFR1_L_VAL		0x999A955A
-+#define CFG_GAFR1_U_VAL		0x0005A4AA
-+#define CFG_GAFR2_L_VAL		0x6AA00000
-+#define CFG_GAFR2_U_VAL		0x55A8041A
-+#define CFG_GAFR3_L_VAL		0x56AA955A
-+#define CFG_GAFR3_U_VAL		0x00000001
-+
-+#define CFG_PSSR_VAL		0x20	// ???????????
-+
-+/*
-+ * PCMCIA and CF Interfaces
-+ */
-+#define CFG_MECR_VAL		0x00000001
-+#define CFG_MCMEM0_VAL		0x00010204
-+#define CFG_MCMEM1_VAL		0x00010204
-+#define CFG_MCATT0_VAL		0x00010204
-+#define CFG_MCATT1_VAL		0x00010204
-+#define CFG_MCIO0_VAL		0x0000c108
-+#define CFG_MCIO1_VAL		0x0001c108
-+
-+//#define CONFIG_PXA_PCMCIA 1
-+//#define CONFIG_PXA_IDE 1
-+
-+#define CONFIG_PCMCIA_SLOT_A 1
-+/* just to keep build system happy  */
-+
-+#define CFG_PCMCIA_MEM_ADDR     0x28000000
-+#define CFG_PCMCIA_MEM_SIZE     0x04000000
-+
-+#define CFG_IDE_MAXBUS		1
-+/* max. 1 IDE bus		*/
-+#define CFG_IDE_MAXDEVICE	1
-+/* max. 1 drive per IDE bus	*/
-+
-+#define CFG_ATA_IDE0_OFFSET	0x0000
-+
-+#define CFG_ATA_BASE_ADDR	0x20000000
-+
-+/* Offset for data I/O			*/
-+#define CFG_ATA_DATA_OFFSET	0x1f0
-+
-+/* Offset for normal register accesses	*/
-+#define CFG_ATA_REG_OFFSET	0x1f0
-+
-+/* Offset for alternate registers	*/
-+#define CFG_ATA_ALT_OFFSET	0x3f0
-+
-+#define CFG_NO_FLASH 1
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-+
-+/*-----------------------------------------------------------------------
-+ * NAND-FLASH stuff
-+ *-----------------------------------------------------------------------
-+ */
-+#undef CFG_NAND_LEGACY
-+
-+/* NAND debugging */
-+//#define CONFIG_MTD_DEBUG
-+//#define CONFIG_MTD_DEBUG_VERBOSE 3
-+
-+#define CFG_NAND_BASE		0xd4000000
-+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define NAND_MAX_CHIPS 		1
-+
-+//#define CONFIG_MTD_NAND_VERIFY_WRITE 1  /* verify all writes!!!         */
-+//#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
-+
-+#define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-+#define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
-+
-+#define NAND_ALLOW_ERASE_ALL	1
-+
-+/*
-+ * JFFS2 partitions
-+ *
-+ */
-+/* No command line, one static partition */
-+//#undef CONFIG_JFFS2_CMDLINE
-+//#define CONFIG_JFFS2_DEV		"nand0"
-+//#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-+//#define CONFIG_JFFS2_PART_OFFSET	0x00060000
-+
-+/* mtdparts command line support */
-+/* Note: fake mtd_id used, no linux mtd map file */
-+
-+#define CONFIG_JFFS2_CMDLINE
-+#define MTDIDS_DEFAULT		"nand0=laze-0"
-+//#define MTDPARTS_DEFAULT	"mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)"
-+#define MTDPARTS_DEFAULT	"mtdparts=laze-0:7168k(Logical),-(JFFS2)"
-+
-+/*
-+ * SHARP SL NAND logical partition
-+ */
-+#define NAND_LOGICAL		1
-+#define NAND_LOGICAL_SIZE	0x700000
-+
-+/*
-+ * Environment
-+ */
-+
-+#define CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_OFFSET		0x40000
-+//#define CFG_ENV_OFFSET_REDUND	0x44000
-+#define CFG_ENV_SIZE		0x20000
-+
-+#endif	/* __CONFIG_H */
---- s/examples/Makefile.orig	2006-12-09 15:08:45.000000000 +0600
-+++ s/examples/Makefile	2006-12-09 15:09:00.000000000 +0600
-@@ -60,7 +60,7 @@
- include $(TOPDIR)/config.mk
- 
- SREC	= hello_world.srec
--BIN	= hello_world.bin hello_world
-+BIN	= hello_world hello_world.bin
- 
- ifeq ($(CPU),mpc8xx)
- SREC	= test_burst.srec
-@@ -122,7 +122,7 @@
- 
- CPPFLAGS += -I..
- 
--all:	.depend $(OBJS) $(LIB) $(SREC) $(BIN)
-+all:	.depend $(OBJS) $(LIB) $(BIN) $(SREC)
- 
- #########################################################################
- $(LIB): .depend $(LIBOBJS)
diff --git a/packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch b/packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch
deleted file mode 100644
index 858296b980..0000000000
--- a/packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-Index: git/lib_arm/div0.c
-===================================================================
---- git.orig/lib_arm/div0.c
-+++ git/lib_arm/div0.c
-@@ -22,9 +22,3 @@
-  */
- 
- /* Replacement (=dummy) for GNU/Linux division-by zero handler */
--void __div0 (void)
--{
--	extern void hang (void);
--
--	hang();
--}
-Index: git/Makefile
-===================================================================
---- git.orig/Makefile
-+++ git/Makefile
-@@ -225,7 +225,7 @@ LIBS := $(addprefix $(obj),$(LIBS))
- .PHONY : $(LIBS)
- 
- # Add GCC lib
--PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lgcc_eh
- 
- # The "tools" are needed early, so put this first
- # Don't include stuff already done in $(LIBS)
---- git/board/akita/akita.c.orig        2007-12-26 17:52:33.000000000 +0000
-+++ git/board/akita/akita.c     2007-12-26 17:52:59.000000000 +0000
-@@ -87,3 +87,7 @@
- 
-        return 0;
- }
-+
-+void raise() {}
-+
-+void abort() {}
---- git/board/corgi/corgi.c.orig        2007-12-26 17:52:33.000000000 +0000
-+++ git/board/corgi/corgi.c     2007-12-26 17:52:59.000000000 +0000
-@@ -87,3 +87,7 @@
- 
-        return 0;
- }
-+
-+void raise() {}
-+
-+void abort() {}
-Index: git/lib_arm/div0.c
-===================================================================
---- git.orig/lib_arm/div0.c
-+++ git/lib_arm/div0.c
-@@ -22,9 +22,3 @@
-  */
- 
- /* Replacement (=dummy) for GNU/Linux division-by zero handler */
--void __div0 (void)
--{
--	extern void hang (void);
--
--	hang();
--}
-Index: git/Makefile
-===================================================================
---- git.orig/Makefile
-+++ git/Makefile
-@@ -225,7 +225,7 @@ LIBS := $(addprefix $(obj),$(LIBS))
- .PHONY : $(LIBS)
- 
- # Add GCC lib
--PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lgcc_eh
- 
- # The "tools" are needed early, so put this first
- # Don't include stuff already done in $(LIBS)
---- git/board/akita/akita.c.orig        2007-12-26 17:52:33.000000000 +0000
-+++ git/board/akita/akita.c     2007-12-26 17:52:59.000000000 +0000
-@@ -87,3 +87,7 @@
- 
-        return 0;
- }
-+
-+void raise() {}
-+
-+void abort() {}
---- git/board/corgi/corgi.c.orig        2007-12-26 17:52:33.000000000 +0000
-+++ git/board/corgi/corgi.c     2007-12-26 17:52:59.000000000 +0000
-@@ -87,3 +87,7 @@
- 
-        return 0;
- }
-+
-+void raise() {}
-+
-+void abort() {}