u-boot_git.bb : Add support for building u-boot for the Lyrtech Small

                Form Factor Software Defined Radio (SFFSDR) board.

1 files changed, 718 insertions, 0 deletions

diff --git a/packages/u-boot/files/sffsdr-u-boot.patch b/packages/u-boot/files/sffsdr-u-boot.patch
new file mode 100644
index 0000000000..cf8415330b
--- /dev/null
+++ b/packages/u-boot/files/sffsdr-u-boot.patch
@@ -0,0 +1,718 @@
+X-Mozilla-Status: 0003
+X-Mozilla-Status2: 00000000
+Return-Path: <owner-sffsdr@LISTSERV.VT.EDU>
+Received: from mail6.zoneedit.com (mail6.zoneedit.com [66.240.226.247])
+	by www.balister.org (8.13.8/8.13.5) with ESMTP id m4GGYUC2017393
+	for <balister@www.balister.org>; Fri, 16 May 2008 12:34:31 -0400
+Received: from listserv.vt.edu (listserv.vt.edu [198.82.161.192])
+	by mail6.zoneedit.com (Postfix) with ESMTP id B457D5D5B6
+	for <philip@BALISTER.ORG>; Fri, 16 May 2008 12:34:29 -0400 (EDT)
+Received: from listserv.vt.edu (listserv.vt.edu [127.0.0.1])
+	by listserv.vt.edu (8.13.1/8.13.1/LISTSERV) with ESMTP id m4G7PKLG018387;
+	Fri, 16 May 2008 12:34:28 -0400
+Received: by LISTSERV.VT.EDU (LISTSERV-TCP/IP release 14.4) with spool id
+          29624903 for SFFSDR@LISTSERV.VT.EDU; Fri, 16 May 2008 12:34:28 -0400
+Received: from freya.cc.vt.edu (IDENT:mirapoint@freya.cc.vt.edu
+          [198.82.161.17]) by listserv.vt.edu (8.13.1/8.13.1/LISTSERV) with
+          ESMTP id m4GGYSHs005336 for <sffsdr@listserv.vt.edu>; Fri, 16 May
+          2008 12:34:28 -0400
+Received: from server.hugovil.com (201-217-static-ppp.3menatwork.com
+          [64.235.217.201]) by freya.cc.vt.edu (MOS 3.8.6-GA) with ESMTP id
+          AOF41814; Fri, 16 May 2008 12:34:27 -0400 (EDT)
+Received: from localhost.localdomain (mail.lyrtech.com [204.101.172.90]) by
+          server.hugovil.com (8.13.6/8.13.6) with ESMTP id m4GGYOYT028003 for
+          <sffsdr@listserv.vt.edu>; Fri, 16 May 2008 12:34:24 -0400
+X-Mailer: git-send-email 1.5.4.5
+X-Greylist: Default is to whitelist mail,
+            not delayed by milter-greylist-3.0 (server.hugovil.com
+            [64.235.217.201]); Fri, 16 May 2008 12:34:25 -0400 (EDT)
+X-Junkmail-Status: score=10/50, host=freya.cc.vt.edu
+X-Junkmail-SD-Raw: score=unknown,
+                   refid=str=0001.0A090205.482DB793.02F2,ss=1,fgs=0,
+                   ip=64.235.217.201, so=2007-10-30 19:00:17,
+                   dmn=5.4.3/2007-10-19
+X-Junkmail-IWF: false
+Message-ID:  <1210970183-26615-1-git-send-email-hugo.villeneuve@lyrtech.com>
+Date:         Fri, 16 May 2008 16:36:23 -0400
+Reply-To: sffsdr Discussion List <SFFSDR@LISTSERV.VT.EDU>
+Sender: sffsdr Discussion List <SFFSDR@LISTSERV.VT.EDU>
+From: Hugo Villeneuve <hugo.villeneuve@LYRTECH.COM>
+Subject: [PATCH] Add support for Lyrtech SFF-SDR board (ARM926EJS)
+To: SFFSDR@LISTSERV.VT.EDU
+Precedence: list
+
+Philip,
+this is the patch I´m planning on sending to the U-Boot
+folks so that the SFFSDR is integrated into mainline
+U-Boot.
+
+It is mostly based on the work you have done.
+
+I added code to make the EEPROM accessible through
+the I2C bus. This is needed because we use an I2C
+switch on the SFFSDR that is turned OFF by default.
+I also added code to read the MAC address from the
+EEPROM.
+
+I also removed unused stuff specific to the
+Schmoogie board.
+
+The network and NAND are both working fine with
+that patch.
+
+I´m looking forward to your comments.
+
+Hugo V.
+
+---
+
+This patch adds support for the Lyrtech SFF-SDR, based
+on the TI DaVinci architecture (ARM926EJS).
+
+Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+---
+
+ MAKEALL                           |    1 +
+ Makefile                          |    3 +
+ board/davinci/sffsdr/Makefile     |   52 +++++++++
+ board/davinci/sffsdr/board_init.S |   29 +++++
+ board/davinci/sffsdr/config.mk    |   24 ++++
+ board/davinci/sffsdr/dv_board.c   |  211 +++++++++++++++++++++++++++++++++++++
+ board/davinci/sffsdr/u-boot.lds   |   52 +++++++++
+ include/asm-arm/mach-types.h      |   13 +++
+ include/configs/davinci_sffsdr.h  |  171 ++++++++++++++++++++++++++++++
+ 9 files changed, 556 insertions(+), 0 deletions(-)
+
+diff --git a/MAKEALL b/MAKEALL
+index 791eabc..1a0cb37 100755
+--- a/MAKEALL
++++ b/MAKEALL
+@@ -495,6 +495,7 @@ LIST_ARM9="			\
+ 	voiceblue		\
+ 	davinci_dvevm		\
+ 	davinci_schmoogie	\
++	davinci_sffsdr		\
+ 	davinci_sonata		\
+ "
+ 
+diff --git a/Makefile b/Makefile
+index 167a717..6280a59 100644
+--- a/Makefile
++++ b/Makefile
+@@ -2402,6 +2402,9 @@ davinci_dvevm_config :	unconfig
+ davinci_schmoogie_config :	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
+ 
++davinci_sffsdr_config :	unconfig
++	@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
++
+ davinci_sonata_config :	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+ 
+diff --git a/board/davinci/sffsdr/Makefile b/board/davinci/sffsdr/Makefile
+new file mode 100644
+index 0000000..fa00138
+--- /dev/null
++++ b/board/davinci/sffsdr/Makefile
+@@ -0,0 +1,52 @@
++#
++# (C) Copyright 2000, 2001, 2002
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS	:= dv_board.o
++SOBJS	:= board_init.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak *~ .depend
++
++#########################################################################
++# This is for $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/davinci/sffsdr/board_init.S b/board/davinci/sffsdr/board_init.S
+new file mode 100644
+index 0000000..22d8adc
+--- /dev/null
++++ b/board/davinci/sffsdr/board_init.S
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
++ *
++ * Board-specific low level initialization code. Called at the very end
++ * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
++ * initialization required.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++
++.globl	dv_board_init
++dv_board_init:
++
++	mov	pc, lr
+diff --git a/board/davinci/sffsdr/config.mk b/board/davinci/sffsdr/config.mk
+new file mode 100644
+index 0000000..e8a329c
+--- /dev/null
++++ b/board/davinci/sffsdr/config.mk
+@@ -0,0 +1,24 @@
++#
++# (C) Copyright 2002
++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
++#
++# Lyrtech SFF SDR board (ARM926EJS) cpu
++# see http://www.lyrtech.com/ for more information on Lyrtech
++#
++# SFF SDR board has 1 bank of 128 MB DDR RAM
++# Physical Address:
++# 8000'0000 to 87FF'FFFF
++#
++# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
++# (mem base + reserved)
++#
++# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0,
++# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc).
++#
++# we load ourself to 8400'0000
++#
++#
++
++# Provide at least 32MB spacing between us and the Integrity kernel image
++TEXT_BASE = 0x84000000
+diff --git a/board/davinci/sffsdr/dv_board.c b/board/davinci/sffsdr/dv_board.c
+new file mode 100644
+index 0000000..a3f60cb
+--- /dev/null
++++ b/board/davinci/sffsdr/dv_board.c
+@@ -0,0 +1,211 @@
++/*
++ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
++ *
++ * Parts are shamelessly stolen from various TI sources, original copyright
++ * follows:
++ * -----------------------------------------------------------------
++ *
++ * Copyright (C) 2004 Texas Instruments.
++ *
++ * ----------------------------------------------------------------------------
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ * ----------------------------------------------------------------------------
++ */
++
++#include <common.h>
++#include <i2c.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/emac_defs.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++extern void	i2c_init(int speed, int slaveaddr);
++extern void	timer_init(void);
++extern int	eth_hw_init(void);
++extern phy_t	phy;
++
++
++/* Works on Always On power domain only (no PD argument) */
++void lpsc_on(unsigned int id)
++{
++	dv_reg_p	mdstat, mdctl;
++
++	if (id >= DAVINCI_LPSC_GEM)
++		return;			/* Don't work on DSP Power Domain */
++
++	mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
++	mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
++
++	while (REG(PSC_PTSTAT) & 0x01) {;}
++
++	if ((*mdstat & 0x1f) == 0x03)
++		return;			/* Already on and enabled */
++
++	*mdctl |= 0x03;
++
++	/* Special treatment for some modules as for sprue14 p.7.4.2 */
++	if (	(id == DAVINCI_LPSC_VPSSSLV) ||
++		(id == DAVINCI_LPSC_EMAC) ||
++		(id == DAVINCI_LPSC_EMAC_WRAPPER) ||
++		(id == DAVINCI_LPSC_MDIO) ||
++		(id == DAVINCI_LPSC_USB) ||
++		(id == DAVINCI_LPSC_ATA) ||
++		(id == DAVINCI_LPSC_VLYNQ) ||
++		(id == DAVINCI_LPSC_UHPI) ||
++		(id == DAVINCI_LPSC_DDR_EMIF) ||
++		(id == DAVINCI_LPSC_AEMIF) ||
++		(id == DAVINCI_LPSC_MMC_SD) ||
++		(id == DAVINCI_LPSC_MEMSTICK) ||
++		(id == DAVINCI_LPSC_McBSP) ||
++		(id == DAVINCI_LPSC_GPIO)
++	   )
++	   	*mdctl |= 0x200;
++
++	REG(PSC_PTCMD) = 0x01;
++
++	while (REG(PSC_PTSTAT) & 0x03) {;}
++	while ((*mdstat & 0x1f) != 0x03) {;}	/* Probably an overkill... */
++}
++
++void dsp_on(void)
++{
++	int	i;
++
++	if (REG(PSC_PDSTAT1) & 0x1f)
++		return;			/* Already on */
++
++	REG(PSC_GBLCTL) |= 0x01;
++	REG(PSC_PDCTL1) |= 0x01;
++	REG(PSC_PDCTL1) &= ~0x100;
++	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
++	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
++	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
++	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
++	REG(PSC_PTCMD) = 0x02;
++
++	for (i = 0; i < 100; i++) {
++		if (REG(PSC_EPCPR) & 0x02)
++			break;
++	}
++
++	REG(PSC_CHP_SHRTSW) = 0x01;
++	REG(PSC_PDCTL1) |= 0x100;
++	REG(PSC_EPCCR) = 0x02;
++
++	for (i = 0; i < 100; i++) {
++		if (!(REG(PSC_PTSTAT) & 0x02))
++			break;
++	}
++
++	REG(PSC_GBLCTL) &= ~0x1f;
++}
++
++
++int board_init(void)
++{
++	/* arch number of the board */
++	gd->bd->bi_arch_number = MACH_TYPE_SFFSDR;
++
++	/* address of boot parameters */
++	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
++
++	/* Workaround for TMS320DM6446 errata 1.3.22 */
++	REG(PSC_SILVER_BULLET) = 0;
++
++	/* Power on required peripherals */
++	lpsc_on(DAVINCI_LPSC_EMAC);
++	lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
++	lpsc_on(DAVINCI_LPSC_MDIO);
++	lpsc_on(DAVINCI_LPSC_I2C);
++	lpsc_on(DAVINCI_LPSC_UART0);
++	lpsc_on(DAVINCI_LPSC_TIMER1);
++	lpsc_on(DAVINCI_LPSC_GPIO);
++
++	/* Powerup the DSP */
++	dsp_on();
++
++	/* Bringup UART0 out of reset */
++	REG(UART0_PWREMU_MGMT) = 0x0000e003;
++
++	/* Enable GIO3.3V cells used for EMAC */
++	REG(VDD3P3V_PWDN) = 0;
++
++	/* Enable UART0 MUX lines */
++	REG(PINMUX1) |= 1;
++
++	/* Enable EMAC and AEMIF pins */
++	REG(PINMUX0) = 0x80000c1f;
++
++	/* Enable I2C pin Mux */
++	REG(PINMUX1) |= (1 << 7);
++
++	/* Set the Bus Priority Register to appropriate value */
++	REG(VBPR) = 0x20;
++
++	timer_init();
++
++	return(0);
++}
++
++int misc_init_r (void)
++{
++	u_int8_t	tmp[20], buf[10];
++	int		i = 0;
++	int		clk = 0;
++
++	clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
++
++	printf ("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
++	printf ("DDR Clock: %dMHz\n", (clk / 2));
++
++	/* Configure I2C switch (PCA9543) to enable channel 0. */
++        tmp[0] = CFG_I2C_PCA9543_ENABLE_CH0;
++	if (i2c_write(CFG_I2C_PCA9543_ADDR, 0, CFG_I2C_PCA9543_ADDR_LEN, tmp, 1)) {
++		printf ("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
++	}
++
++	/* Set Ethernet MAC address from EEPROM.
++	 * We must read 8 bytes because data is stored in little-endian. */
++	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x05A8, CFG_I2C_EEPROM_ADDR_LEN, buf, 8)) {
++		printf ("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
++	} else {
++		tmp[0] = 0xff;
++		for (i = 0; i < 6; i++)
++			tmp[0] &= buf[i];
++
++		if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
++			sprintf ((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
++				 buf[3], buf[2], buf[1], buf[0],
++				 buf[7], buf[6]);
++			setenv ("ethaddr", (char *)&tmp[0]);
++		}
++	}
++
++	if (!eth_hw_init()) {
++		printf ("Ethernet init failed\n");
++	} else {
++		printf ("ETH PHY: %s\n", phy.name);
++	}
++	
++	return(0);
++}
++
++int dram_init(void)
++{
++	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++
++	return(0);
++}
+diff --git a/board/davinci/sffsdr/u-boot.lds b/board/davinci/sffsdr/u-boot.lds
+new file mode 100644
+index 0000000..a4fcd1a
+--- /dev/null
++++ b/board/davinci/sffsdr/u-boot.lds
+@@ -0,0 +1,52 @@
++/*
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++	. = 0x00000000;
++	. = ALIGN(4);
++	.text	:
++	{
++	  cpu/arm926ejs/start.o	(.text)
++	  *(.text)
++	}
++	. = ALIGN(4);
++	.rodata : { *(.rodata) }
++	. = ALIGN(4);
++	.data : { *(.data) }
++	. = ALIGN(4);
++	.got : { *(.got) }
++
++	. = .;
++	__u_boot_cmd_start = .;
++	.u_boot_cmd : { *(.u_boot_cmd) }
++	__u_boot_cmd_end = .;
++
++	. = ALIGN(4);
++	__bss_start = .;
++	.bss (NOLOAD) : { *(.bss) }
++	_end = .;
++}
+diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
+index aaf2ea2..b347857 100644
+--- a/include/asm-arm/mach-types.h
++++ b/include/asm-arm/mach-types.h
+@@ -1595,6 +1595,7 @@ extern unsigned int __machine_arch_type;
+ #define MACH_TYPE_P300                 1602
+ #define MACH_TYPE_XDACOMET             1603
+ #define MACH_TYPE_DEXFLEX2             1604
++#define MACH_TYPE_SFFSDR               1657
+ 
+ #ifdef CONFIG_ARCH_EBSA110
+ # ifdef machine_arch_type
+@@ -16500,6 +16501,18 @@ extern unsigned int __machine_arch_type;
+ # define machine_is_schmoogie()	(0)
+ #endif
+ 
++#ifdef CONFIG_MACH_SFFSDR
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SFFSDR
++# endif
++# define machine_is_sffsdr()	(machine_arch_type == MACH_TYPE_SFFSDR)
++#else
++# define machine_is_sffsdr()	(0)
++#endif
++
+ #ifdef CONFIG_MACH_AZTOOL
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
+new file mode 100644
+index 0000000..a9b480b
+--- /dev/null
++++ b/include/configs/davinci_sffsdr.h
+@@ -0,0 +1,171 @@
++/*
++ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#include <asm/sizes.h>
++
++/*=======*/
++/* Board */
++/*=======*/
++#define SFFSDR
++#define CFG_NAND_LARGEPAGE
++#define CFG_USE_NAND
++/*===================*/
++/* SoC Configuration */
++/*===================*/
++#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
++#define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
++#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
++#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
++#define CFG_HZ			1000
++/*==================================================*/
++/* EEPROM definitions for Atmel 24LC64 EEPROM chip  */
++/*==================================================*/
++#define CFG_I2C_EEPROM_ADDR_LEN		2
++#define CFG_I2C_EEPROM_ADDR		0x50
++#define CFG_EEPROM_PAGE_WRITE_BITS	5
++#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
++/*=============*/
++/* Memory Info */
++/*=============*/
++#define CFG_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
++#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
++#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
++#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
++#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
++#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
++#define PHYS_SDRAM_1		0x80000000	/* DDR Start */
++#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
++#define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
++/*====================*/
++/* Serial Driver info */
++/*====================*/
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
++#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
++#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
++#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
++#define CONFIG_BAUDRATE		115200		/* Default baud rate */
++#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
++/*===================*/
++/* I2C Configuration */
++/*===================*/
++#define CONFIG_HARD_I2C
++#define CONFIG_DRIVER_DAVINCI_I2C
++#define CFG_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
++#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
++/*==================================*/
++/* Network & Ethernet Configuration */
++/*==================================*/
++#define CONFIG_DRIVER_TI_EMAC
++#define CONFIG_MII
++#define CONFIG_BOOTP_DEFAULT
++#define CONFIG_BOOTP_DNS
++#define CONFIG_BOOTP_DNS2
++#define CONFIG_BOOTP_SEND_HOSTNAME
++#define CONFIG_NET_RETRY_COUNT	10
++#define CONFIG_OVERWRITE_ETHADDR_ONCE
++/*=====================*/
++/* Flash & Environment */
++/*=====================*/
++#undef CFG_ENV_IS_IN_FLASH
++#define CFG_NO_FLASH
++#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
++#define CFG_ENV_SECT_SIZE	2048	/* Env sector Size */
++#define CFG_ENV_SIZE		SZ_128K
++#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
++#define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
++#define CFG_NAND_BASE		0x02000000
++#define CFG_NAND_HW_ECC
++#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
++#define NAND_MAX_CHIPS		1
++#define CFG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
++/*=====================*/
++/* Board related stuff */
++/*=====================*/
++/*==========================================*/
++/* I2C switch definitions for PCA9543 chip  */
++/* on Lyrtech SFF SDR board.                */
++/*==========================================*/
++#define CFG_I2C_PCA9543_ADDR		0x70
++#define CFG_I2C_PCA9543_ADDR_LEN	0	/* This chip has a single register. */
++#define CFG_I2C_PCA9543_ENABLE_CH0	0x01	/* Enable channel 0. */
++/*==============================*/
++/* U-Boot general configuration */
++/*==============================*/
++#undef 	CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
++#define CONFIG_MISC_INIT_R
++#undef CONFIG_BOOTDELAY
++#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
++#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
++#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
++#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print buffer sz */
++#define CFG_MAXARGS		16		/* max number of command args */
++#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
++#define CFG_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
++#define CONFIG_VERSION_VARIABLE
++#define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far, may be later */
++#define CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2	"> "
++#define CONFIG_CMDLINE_EDITING
++#define CFG_LONGHELP
++#define CONFIG_CRC32_VERIFY
++#define CONFIG_MX_CYCLIC
++/*
++ * Define this to load an Integrity kernel.
++ *
++#define CONFIG_CMD_ELF
++ */
++
++/*===================*/
++/* Linux Information */
++/*===================*/
++#define LINUX_BOOT_PARAM_ADDR	0x80000100
++#define CONFIG_CMDLINE_TAG
++#define CONFIG_SETUP_MEMORY_TAGS
++#define CONFIG_BOOTARGS		"mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
++#define CONFIG_BOOTCOMMAND	"setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
++/*=================*/
++/* U-Boot commands */
++/*=================*/
++#include <config_cmd_default.h>
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_DIAG
++#define CONFIG_CMD_I2C
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_SAVES
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_EEPROM
++#undef CONFIG_CMD_BDI
++#undef CONFIG_CMD_FPGA
++#undef CONFIG_CMD_SETGETDCR
++#undef CONFIG_CMD_FLASH
++#undef CONFIG_CMD_IMLS
++/*=======================*/
++/* KGDB support (if any) */
++/*=======================*/
++#ifdef CONFIG_CMD_KGDB
++#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
++#endif
++#endif /* __CONFIG_H */
+