rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

9 files changed, 0 insertions, 2026 deletions

diff --git a/packages/sccd/files/Makefile b/packages/sccd/files/Makefile
deleted file mode 100644
index 650404643d..0000000000
--- a/packages/sccd/files/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# Copyright (c) 2006
-#	Protium Computing, Inc.  All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Protium Computing, Inc.
-# 4. The name of Protium Computing, Inc. may not be used to endorse or 
-#    promote products derived from this software without specific prior 
-#    written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-TARGETS=sccd scc
-
-all:	$(TARGETS)
-
-sccd:	scc-disk.o scc-utils.o sccd.o
-	$(CC) $(CFLAGS)   -o sccd scc-utils.o scc-disk.o sccd.o
-
-scc:	scc-utils.o scc.o
-	$(CC) $(CFLAGS)   -o scc scc-utils.o scc.o
-
-install: $(TARGETS)
-	install -d           $(DESTDIR)/sbin
-	install -m 755 sccd  $(DESTDIR)/sbin/sccd
-	install -m 755 scc   $(DESTDIR)/sbin/scc
-	install -d           $(DESTDIR)/etc/init.d
-	install -m 755 init-sccd   $(DESTDIR)/etc/init.d/sccd
-	install -d           $(DESTDIR)/usr/share/man/man1
-	install -m 644 scc.1 $(DESTDIR)/usr/share/man/man1/scc.1
-
-clean:
-	rm -f $(TARGETS) *.o core
diff --git a/packages/sccd/files/README b/packages/sccd/files/README
deleted file mode 100644
index d2d1934dd4..0000000000
--- a/packages/sccd/files/README
+++ /dev/null
@@ -1,220 +0,0 @@
-		     Iomega G2 MC68HC908QY4 Support Notes
-				 October 2006
-
-The Iomega G2 Version 3.x and 5.x boards have a secondary microcontroller
-aboard, a Freescale MC68HC908QY4. This microcontroller is connected to the
-board's LED, fan, digital thermometer, power switch, and main processor, the
-MPC8241. The connection to the main processor is through the 8241's second
-UART and possibly its reset lines.     
-
-The microcontroller can perform the following functions:
-	o The LED can be set to off, blue, red, blue flash, red flash, 
-	  alternate (blue->red->blue) and some boards alternate3
-	  (blue->blue->blue->red->red->red). The flash and alernate rates 
-	  can be be set. Alternate3 rate is fixed.
-	o Fan can be set to on or auto. Auto mode is a thermostat function
-	  that turns the fan on and off based on two temprature settings:
-        	Fan Temp High and Fan Temp Low.
-	o The system can be reset, causing a MPC8241 reset, or stopped,
-	  causing a full power down.
-	o The microcontroller can detect if the soft power switch has been
-	  activated. There appears to a 20s delay after the power switch 
-	  has been depressed before the microcontroller causes an actual 
-	  power off. This event can be detected by polling the 
-	  microcontroller.
-
-The running system communicates with microcontroller and ultimately controls
-the devices connected to it via the MPC8241's second UART. The connection
-settings are: 9600,8,n,1. The serial protocol is very simple, an alternating
-send and receive of data packets. Communication is done in 8 byte data packets
-and is initiated by the host processor. Once the host processor has sent 8
-bytes, the microcontroller responds with 8 bytes. The packet contains bytes
-that can affect the state of the power, led and fan. It also contains bits
-reflecting external soft power events. Both packets sent and received follow
-the same structure.  
-
-The 8 bytes are decoded as follows:
-
-  0                   1                   2                   3   
-  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- |      Power    |       LED     |      LED      |       Fan     |
- |      State    |      State    |   Flash Rate  |      State    |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Fan High Temp |  Fan Low Temp |               |               |
- |      ON       |      OFF      |      ID       |    CheckSum   |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-	Hex 	Ascii	Comments
-	---	-----	--------------------------------------------------
-Power State:
-	0x62	 b	Running, nominal running state
-	0x63	 c	Stop, power down immediately (ID == HOST) OR
-			Stop, the power switch has been activated, stop in 20s 
-				(ID == CONTROLLERxx) OR
-			Stop, the host has advised Stop
-				(ID == CONTROLLERxx)
-	0x64	 d	Advise Stop, the host is annoucing its intention
-				to stop (ID == HOST) 
-	0x65	 e	Restart, restart immediately (ID == HOST) OR
-			Restart, the host has advised Restart
-				(ID == CONTROLLERxx)
-	0x66	 f	Advise Restart, the host is annoucing its intention
-				to restart (ID == HOST) 
-	0x67	 g	Reset, reset immediately (ID == HOST) OR
-			Reset, the host has advised Reset
-				(ID == CONTROLLERxx)
-	0x68	 h	Advise Reset, the host is annoucing its intention
-				to reset (ID == HOST) 
-
-Except for Running, the Power states are grouped in pairs: Advise [state] and
-[state], where state can be: Stop, Restart, or Reset. The Advise state lets
-the controller know that there is an intention to either stop, restart or
-reset the board. The controller responds by moving to that state and setting
-the LED to redflash, but it does not enact the power change. Instead it waits
-for the host to issue the actual state before performing the power commands.
-For example, assume the microcontroller is reporting the power state to be
-[Running, LED Blue]. After the host issues a Advise Stop, the microcontroller
-reports [Stop, LED Redflash] and then waits, indefinitely. The Host then
-issues a Stop, the microcontroller immediately turns the power off. 
-
-There is nothing in the protocol that requires the Advise [state] packets. The
-Host can issue a Stop, Restart, or Reset directly from the Running state and
-the microcontroller will immediately enact the change. 
-
-There is nothing in the protocol that forbids moving back to Running from the
-Stop, Restart or Reset states, i.e. undoing an Advise [state] packet.  
-
-The exception to that rule is in the Stop state. The Stop state can be reached
-by either issuing a Advise Stop or from a softpower switch activation (someone
-hits the power switch). If the latter, then a request to move to any other
-state is ignored and the power will go off in approximately 20s. 
-
-NOTE 1: There does not appear to be any difference in processing the Restart
-and Reset state changes. They both deliver a system restart. 
-
-NOTE 2: Obvious absence of an 'a' state. Both the LED and Fan controls use 'a'
-as a state, but Power starts with 'b'. No evidence has shown 'a' to be a
-valid state. 
-
-LED State:
-	0x61	 a	Off
-	0x62	 b	Blue
-	0x63	 c	Red
-	0x64	 d	Blue Flash
-	0x65	 e	Red Flash
-	0x66	 f	Alternate1 Blue/Red
-	0x67	 g	Alternate3 3 Blue/3 Red (only on version 5.x boards)
-
-LED States are self explanatory with one exception. Although state 'g' or
-Alternate3 has been observed, it only seems to function on IOMEGA G2 Version
-5.x boards and does not respond to rate changes.
- 
-LED Flash Rate:
-The flash rate seems to be 1/x seconds on, then 1/x seconds off. So one cycle
-of off and on at an LED Flash rate of 1 is almost 2s.  The value spans 8 bits
-but functionally 0 is off and 36-40 is on. Testing has shown an oddity, the
-value 35 is rejected by the microcontroller software and is not set.  
-
-Fan State:
-	0x61	 a	Auto	thermostat function
-	0x62	 b	On	always on
-
-Fan High Temp:
-High Temp is the temprature in Celsius where the fan is be turned on. 
-
-Fan Low Temp:
-Low Temp is the temprature in Celsius where the fan is be turned off.
-
-ID:
-The real purpose of this field is not known. It is known that it is a constant
-depending upon the direction of the packets and the board rev. It has been
-designated ID as a place holder but it could as easily be defined as version
-or it may be something else entirely.   
-
-	0x00	DC2	CONTROLLER00
-			IOMEGA G2 Version 5.x Controller ID (recv'd packets)
-	0x07	BEL	HOST (sent packets)
-	0x12	DC2	CONTROLLER12
-			IOMEGA G2 Version 3.x Controller ID (recv'd packets)
-
-Checksum:
-The check sum is an 8 bit sum of the first 7 bytes with the most significant
-bit cleared.  
-		
-		Sum = ((b1 + b2 + b3 +b4 +b5 +b6 + b7) & 0x7f)
-
-The bytes and their meanings were determined by watching the serial port
-chatter during specific events such as LED Blue, LED Red, Fan ON, etc. So only
-events observed have been decoded. Although all the significant events were
-observed and decoded, there are some holes in the understanding of the
-protocol.       
-
-There is one special packet that causes the microcontroller to reset. This
-packet is: 
-		0x23696f6d 0x65676115 
-		(or as a string "#iomega\025")
-
-The resulting packet from the microcontroller is:
-		0x62000000 0x00000062
-
-Testing also yielded that a null packet will cause the microcontroller to
-feed back the current state. So this packet: 
-		0x00000000 0x00000000
-
-will yield something like this (this is the default state):
-		0x62620a61 0x322d1220 
-
-The default state when the board powers on is:
-		State: Run
-		LED: Red
-		LED Rate: 10
-		Fan: On
-		Fan Temp High: 50C
-		Fan Temp Low: 45C
-
-Below is some of the data collected while watching the serial port chatter:
-
-w: 0x23696f6d 0x65676115   #iomega\025
-r: 0x62000000 0x00000062   b\0\0\0\0\0\0b
-w: 0x62630a61 0x322d0716   bc\na2-\7\26 		red state
-r: 0x62630a61 0x322d1221   bc\na2-\22!		
-w: 0x62641161 0x322d071e   bd\21a2-\7\36		blue flash
-r: 0x62641161 0x322d1229   bd\21a2-\22)
-w: 0x62641161 0x322d071e   bd\21a2-\7\36		blue flash
-
-LED ok 
-w: 0x62620a61 0x322d0715   bb\na2-\7\25
-r: 0x62630a61 0x322d1220   bb\na2-\22  
-
-LED alt 
-w: 0x626f0a61 0x322d0719   bf\na2-\7\31
-r: 0x626f0a61 0x322d1224   bf\na2-\22$
-
-reset
-w: 0x68620a61 0x322d071b   hb\na2-\7\33		reset
-r: 0x67620a61 0x322d0013   gb\na2-\0\23		resetting
-				
-restart
-w: 0x66620a61 0x322d0719  fb\na2-\7\31		restart
-r: 0x65620a61 0x322d1223  eb\na2-\22#  		restarting
-
-shutdown 
-w: 0x64620a61 0x322d0717  db\na2-\7\27		shutdown
-r: 0x63620a61 0x322d1221  cb\na2-\22!  		power shutting down
-
-soft Power
-r: 0x63620a61 0x322d000f  cb\na2-\0\17		power shutting down 
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/packages/sccd/files/init-sccd b/packages/sccd/files/init-sccd
deleted file mode 100644
index 372bfeae91..0000000000
--- a/packages/sccd/files/init-sccd
+++ /dev/null
@@ -1,38 +0,0 @@
-#! /bin/sh 
-#
-# This is an init script for open protium for storcenter
-# Copy it to /etc/init.d/sccd and type
-# > update-rc.d sccd defaults 60
-#
-sccd=/sbin/sccd
-test -x "$sccd" || exit 0
-
-case "$1" in
-  start)
-    echo -n "Starting StorCenter Control Daemon"
-    start-stop-daemon --start --quiet --exec $sccd
-    echo "."
-    ;;
-  stop)
-    echo -n "Stopping StorCenter Control Daemon"
-    start-stop-daemon --stop --quiet --pidfile /var/run/sccd.pid
-    echo "."
-    ;;
-  reload|force-reload)
-    start-stop-daemon --stop --quiet --signal 1 --exec $sccd
-    ;;
-  restart)
-    echo -n "Stopping StorCenter Control Daemon"
-    start-stop-daemon --stop --quiet --pidfile /var/run/sccd.pid
-    echo "."
-    sleep 1
-    echo -n "Starting StorCenter Control Daemon"
-    start-stop-daemon --start --quiet --exec $sccd
-    echo "."
-    ;;
-  *)
-    echo "Usage: /etc/init.d/sccd {start|stop|reload|restart|force-reload}"
-    exit 1
-esac
-
-exit 0
diff --git a/packages/sccd/files/scc-disk.c b/packages/sccd/files/scc-disk.c
deleted file mode 100644
index 4fd494203a..0000000000
--- a/packages/sccd/files/scc-disk.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (c) 2006
- *	Protium Computing, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Protium Computing, Inc.
- * 4. The name of Protium Computing, Inc. may not be used to endorse or 
- *    promote products derived from this software without specific prior 
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <strings.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/un.h>
-#include <sys/syslog.h>
-#include <sys/param.h>
-
-struct watch_table {
-	char 	*wt_path;
-	int	wt_status;
-	int	wt_reads;
-	int	wt_writes;
-#define WT_INVALID	0
-#define WT_VALID	1
-#define WT_CHECK	2
-} iowt[] = { 
-	{ "/sys/block/hda/stat", 	WT_CHECK,	0,	0},
-	{ "/sys/block/hdb/stat", 	WT_CHECK,	0,	0},
-	{ "/sys/block/hdc/stat", 	WT_CHECK,	0,	0},
-	{ "/sys/block/hdd/stat", 	WT_CHECK,	0,	0},
-	{ NULL, WT_INVALID, -1, -1}
-};
-
-/* 
- * disk_activity() returns back the total number of read and writes done 
- * by the devices listed in the io watch table since the last call to 
- * disk_activity.  The number of reads and writes are determined by 
- * opening and reading each of the valid files listed in the io watch 
- * table.The number of reads and writes are stored in the io watch table so 
- * that the next call to this routine can compare the current number of read 
- * and writes to those stored in the io watch table. The difference for 
- * each device is summed in the activity variable.  The routine lazy 
- * evaluates the existance of the devices in the table. 
- *
- * For the storcenter, we are only concerned with internal drives. 
- *
- * The wt_path element must point at a diskstat file in the sysfs filesystem.  
- * File format can be found at: /usr/src/linux/Documentation/iostats.txt
- * For this routine:
- *	nr, nw - number read and writes
- *	nmr, nmw - number of merged reads and writes
- *	nsr, nsw - number of the sectors read and written
- *	tr, tw - time spent reading and writing
- *	nio - raw number of ios 
- * 	tio, wtio - time spent and weighted time spent doing io
- */
-int
-disk_activity()
-{
-	int	activity = 0;
-	char	mesg[256];
-	int	rc, nr, nmr, nsr, tr, nw, nmw, nsw, tw, nio, tio, wtio;
-	FILE	*f;
-
-	struct stat		st;
-	struct watch_table	*w;
-
-	for (w = iowt; w->wt_path; w++) {
-		/*
-		 * If status ids set to check, do the lazy existence 
-		 * evaluation. If stat fails set to invalid. Don't 
-		 * worry about perms here. 
-		 */
-		if ((w->wt_status == WT_CHECK) && 
-		    (stat(w->wt_path, &st) < 0)) {
-			sprintf(mesg, "%s not available", w->wt_path);
-			syslog(LOG_INFO, mesg);
-			w->wt_status = WT_INVALID;
-		}
-
-		/*
-		 * Short circuit the loop if invalid.
-		 */
-		if (w->wt_status == WT_INVALID) 
-			continue;
-
-		/*
-		 * If it can't be opened rdonly, set to invalid
-		 */
-		if ((f = fopen(w->wt_path, "r")) < 0) {
-			sprintf(mesg, "Unable to open %s, no longer watching",
-				w->wt_path);
-			syslog(LOG_INFO, mesg);
-			w->wt_status = WT_INVALID;
-			continue;
-		}
-
-		rc = fscanf(f, "%d %d %d %d %d %d %d %d %d %d %d", 
-		       &nr, &nmr, &nsr, &tr,
-		       &nw, &nmw, &nsw, &tw,
-		       &nio, &tio, &wtio);
-
-		fclose(f);
-
-		if (rc != 11) {
-			sprintf(mesg, "Unable to read %s", w->wt_path);
-			syslog(LOG_INFO, mesg);
-			continue;
-		}
-
-		/*
-		 * If we haven't seen any activity on this device before
-		 * then just save the values and go on. This, although
-		 * not strictly necessary, prevents the initial call to 
-		 * disk_activity returning back the base set io activity.
-		 * Remember it takes two calls to get a true difference.
-		 */
-		if ((w->wt_reads == 0) && (w->wt_writes == 0)) {
-			w->wt_reads  = nr;
-			w->wt_writes = nw;
-			continue;
-		}
-
-		activity += (nr - w->wt_reads);
-		activity += (nw - w->wt_writes);
-
-		w->wt_reads  = nr;
-		w->wt_writes = nw;
-
-		/*
-		   printf("%s: %d %d %d %d %d %d %d %d %d %d %d\n",
-		       w->wt_path,
-		       nr, nmr, nsr, tr,
-		       nw, nmw, nsw, tw,
-		       nio, tio, wtio);
-		*/
-	}
-
-	return(activity);
-}
diff --git a/packages/sccd/files/scc-utils.c b/packages/sccd/files/scc-utils.c
deleted file mode 100644
index ab48ecb677..0000000000
--- a/packages/sccd/files/scc-utils.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * Copyright (c) 2006
- *	Protium Computing, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Protium Computing, Inc.
- * 4. The name of Protium Computing, Inc. may not be used to endorse or 
- *    promote products derived from this software without specific prior 
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-#include <stdio.h>
-#include <fcntl.h>
-#include <time.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <strings.h>
-#include <signal.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/select.h>
-#include <sys/syslog.h>
-#include <sys/resource.h>
-#include <termios.h>
-
-#include "scc.h"
-
-int scc_die = 0;
-
-char
-scc_cksum(int *i, int *j)
-{
-	unsigned char s;
-	unsigned char *b;
-
-	b = (unsigned char *)i;
-	s = b[0] + b[1] + b[2] + b[3];
-	b = (unsigned char *)j;
-	s = s + b[0] + b[1] + b[2];
- 	s = (s & 0x7f);
-
-	return((char)s);
-}
-
-int 
-scc_validate(int *i, int *j, int verbose)
-{
-	int r, s;
-
-	/* if (verbose) printf("Packet: [0x%08x 0x%08x]\n", *i, *j); */
-
-	switch (*i & SCC_POWERMASK) {
-	case SCC_RUN:
-		if (verbose) printf("\tPower: run\n");
-		break;
-	case SCC_STOP:
-		if (verbose) printf("\tPower: stop\n");
-		break;
-	case SCC_ADVISESTOP:
-		if (verbose) printf("\tPower: advise stop\n");
-		break;
-	case SCC_RESTART:
-		if (verbose) printf("\tPower: restart\n");
-		break;
-	case SCC_ADVISERESTART:
-		if (verbose) printf("\tPower: advise restart\n");
-		break;
-	case SCC_RESET:
-		if (verbose) printf("\tPower: reset\n");
-		break;
-	case SCC_ADVISERESET:
-		if (verbose) printf("\tPower: advise reset\n");
-		break;
-	default:
-		if (verbose) printf("validate: bad power 0x%08x\n", *i);
-		return(-1);	
-	}
-
-	switch (*i & SCC_LEDMASK) {
-	case SCC_LEDOFF:
-		if (verbose) printf("\tLed: off\n");
-		break;
-	case SCC_LEDBLUE:
-		if (verbose) printf("\tLed: blue\n");
-		break;
-	case SCC_LEDRED:
-		if (verbose) printf("\tLed: red\n");
-		break;
-	case SCC_LEDBLUEFLASH:
-		if (verbose) printf("\tLed: blue flash\n");
-		break;
-	case SCC_LEDREDFLASH:
-		if (verbose) printf("\tLed: red flash\n");
-		break;
-	case SCC_LEDALTERNATE1:
-		if (verbose) printf("\tLed: alternate1\n");
-		break;
-	case SCC_LEDALTERNATE3:
-		if (verbose) printf("\tLed: alternate3\n");
-		break;
-	default:
-		if (verbose) printf("validate: bad led value 0x%08x\n", *i);
-		return(-1);	
-	}	
-
-	r = ((*i & SCC_LEDRATEMASK)  >> SCC_LEDRATESHIFT);
-
-	if (verbose) {
-		printf("\tLed Flash Rate: %d\n", r);
-	}
-
-	if (r >= SCC_LEDRATEHI) 
-		printf("warning: led rate too high - led on (%d)\n", r);
-	if (r <= SCC_LEDRATELO) 
-		printf("warning: led rate too low - led off (%d)\n", r);
-
-
-	switch (*i & SCC_FANMASK) {
-	case SCC_FANAUTO:
-		if (verbose) printf("\tFan: auto\n");
-		break;
-	case SCC_FANON:	
-		if (verbose) printf("\tFan: on\n");
-		break;
-	default:
-		if (verbose) printf("validate: bad fan value 0x%08x\n", *i);
-		return(-1);	
-	}
-
-	r = ((*j & SCC_FANTEMPONMASK)  >> SCC_FANTEMPONSHIFT);
-	s = ((*j & SCC_FANTEMPOFFMASK) >> SCC_FANTEMPOFFSHIFT);
-
-	if (verbose) {
-		printf("\tFan On  Temprature: %dC\n", r);
-		printf("\tFan Off Temprature: %dC\n", s);
-	}
-
-	if (r >= SCC_FANTEMPONHI) 
-		printf("warning: fan on temp too high - fan off (%dC)\n", r);
-	if (s <= SCC_FANTEMPONLO) 
-		printf("warning: fan on temp too low - fan on (%dC)\n", s);
-	if ((r - s) < SCC_FANTEMPDIFF) {
-		printf("warning: fan on/off temp too close or on < off \n");
-		printf("warning:\tfan on (%dC) fan off (%dC) \n", r, s);
-	}
-
-	r = *j & SCC_IDMASK;
-	if ((r != SCC_HOST) && 
-	    (r != SCC_CTLR00) &&  
-	    (r != SCC_CTLR12)) {
-		printf("warning: bad id %08x\n", r);
-	}	
-
-	r = *j & SCC_CKSUMMASK; 
-	if (r != scc_cksum(i, j)) {
-		printf("warning: checksum incorrect (%02x != %02x)\n", 
-		       r, scc_cksum(i, j));
-	}
-	return(0);	
-}
-
-int
-scc_setval(int *i, int mask, int val)
-{
-	/* clear the field */
-	*i = (*i & (mask ^ 0xffffffff));
-
-	/* insert the field */
-	*i = (*i ^ val);
-	return(0);
-}
-
-int
-scc_setrate(int *i, int mask, int shift, int val)
-{
-	/* Assumption: val is < field width */
-
-	/* clear the field */
-	*i = (*i & (mask ^ 0xffffffff));
-
-	/* insert the field */
-	*i = (*i ^ (val << shift));
-	return(0);
-}
-
-int 
-scc_defaults(int *i, int *j)
-{
-	scc_setval(i,  SCC_POWERMASK, SCC_POWERDEFAULT);
-	scc_setval(i,  SCC_LEDMASK, SCC_LEDDEFAULT);	
-	scc_setrate(i, SCC_LEDRATEMASK, SCC_LEDRATESHIFT, SCC_LEDRATEDEFAULT);
-	scc_setval(i,  SCC_FANMASK, SCC_FANDEFAULT);
-
-	scc_setrate(j, SCC_FANTEMPONMASK, 
-		SCC_FANTEMPONSHIFT, SCC_FANTEMPONDEFAULT);
-	scc_setrate(j, SCC_FANTEMPOFFMASK, 
-		SCC_FANTEMPOFFSHIFT, SCC_FANTEMPOFFDEFAULT);
-	return(0);
-}
-
-void 
-scc_sighandler(int sig)
-{
-	/*
-	 * Just catch quit and term and set die
-	 */
-	switch(sig) {
-	case SIGQUIT:
-	case SIGTERM:
-		syslog(LOG_INFO, "Terminating");
-		scc_die=1;
-		break;
-	}
-}
-
-int
-scc_daemonize(int cores)
-{
-	int	fd, i;
-	char	pidstr[20];
-	pid_t	pid;
-
-	struct rlimit limit[1] = {{ 0, 0 }};
-
-
-	if (!cores) {
-		/* 
-		 * No corefiles please 
-		 */
-		if (getrlimit(RLIMIT_CORE, limit) == -1) {
-			perror("getrlimit");
-			return -1;
-		}
-
-		limit->rlim_cur = 0;
-
-		if (setrlimit(RLIMIT_CORE, limit) != 0) {
-			perror("setrlimit");
-			return -1;
-		}
-	}
-	
-	/*
-	 * Must be root
-	 */
-	if (getuid() != 0) {
-		fprintf(stderr, "Must be root\n");
-		return -1;
-	}
-
-	/* 
-	 * If parent isn't init, make it init.
-	 */
-	if (getppid() != 1) {
-    
-		pid = fork();
-		if (pid == -1) {
-			return -1;
-		}
-		if (pid != 0) {
-			exit(EXIT_SUCCESS);
-		}
-
-		setsid();
-
-		/*
-		 * ignore sig hup so that when our new padre exits
-		 * the kinder won't exit
-		 */
-		signal(SIGHUP, SIG_IGN);
-
-		pid = fork();
-		if (pid == -1) {
-			return -1;
-		}
-		if (pid != 0) {
-			exit(EXIT_SUCCESS);
-		}
-	}
-
-	/*
-	 * Set working dir to root
-	 */
-	chdir("/");
-
-	/*
-	 * Make sure file creations are created with explicit perms
-	 */
-	umask(0);
-
-	/*
-	 * Close all FDs
-	 */
-	for (i = 0; i < sysconf(_SC_OPEN_MAX); i++) {
-		close(i);
-	}
-	
-	/* 
-	 * set std in, out, err to /dev/null
-	 */
-	for (i = 0; i < 3; i++) {
-
-		if ((fd = open("/dev/null", (i==0?O_RDONLY:O_WRONLY))) == -1) {
-			perror("setting up stdin, stdout, stderr");
-			return -1;
-		}
-		
-		if (i != fd) {
-			if (dup2(fd, i) == -1) {
-				perror("setting up stdin, stdout, stderr");
-				return -1;
-			}
-			close(fd);
-		}
-	}
-
-	/*
-	 * Open and lock the pid file. Ensures only one daemon
-	 * Write our pid into the file 
-	 */
-	fd = open(SCC_PIDFILE, O_RDWR|O_CREAT, 0640);
-	if (fd < 0) {
-		return(-1);
-		
-	}
-	
-	if (lockf(fd, F_TLOCK, 0) < 0) {
-		/* we are not alone */
-		close(fd);
-		return(-1);
-	}
-
-	sprintf(pidstr,"%-6d\n", getpid());
-	write(fd, pidstr, strlen(pidstr)); 
-
-	/*
-	 * Open syslog
-	 */
-	openlog("sccd", LOG_PID, LOG_DAEMON);
-	syslog(LOG_INFO, "Starting");
-
-	/*
-	 * Ignore some signals and handle others
-	 */
-	signal(SIGCHLD, SIG_IGN);
-	signal(SIGTSTP, SIG_IGN);
-	signal(SIGTTOU, SIG_IGN);
-	signal(SIGTTIN, SIG_IGN);
-	signal(SIGQUIT, scc_sighandler);
-	signal(SIGTERM, scc_sighandler);
-
-	return(0);
-}
-
-
diff --git a/packages/sccd/files/scc.1 b/packages/sccd/files/scc.1
deleted file mode 100644
index be27a569c3..0000000000
--- a/packages/sccd/files/scc.1
+++ /dev/null
@@ -1,120 +0,0 @@
-.\" Copyright (c) 2006
-.\"	Protium Computing, Inc.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by Protium Computing, Inc.
-.\" 4. The name of Protium Computing, Inc. may not be used to endorse or 
-.\"    promote products derived from this software without specific prior 
-.\"    written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\" 
-.TH SCC "1" "November 2006" "scc 1.0" "User Commands"
-.SH NAME
-scc \- StorCenter Control Utility
-.SH SYNOPSIS
-.B scc
-\fI[OPTIONS]\fR ...
-.SH DESCRIPTION
-scc controls the Iomega StorCenter's LED, fan and soft power. It does this 
-either by sending a message to the StorCenter Control Daemon, if available, 
-or directly communicating with the StorCenter's microcontroller responsible 
-for these devices.
-.PP
-The scc utility  can perform the following functions:
-.TP
-\fB\fR
-The LED can be set to off, blue, red, blue flash, red flash, 
-alternate (blue->red->blue) and on some boards alternate3
-(blue->blue->blue->red->red->red). The flash and alernate rates 
-can be be set. Alternate3 rate is fixed.
-.TP
-\fB\fR
-Fan can be set to on or auto. Auto mode is a thermostat function
-that turns the fan on and off based on two temprature settings:
-Fan Temp High and Fan Temp Low.
-.TP
-\fB\fR
-The system can be reset, causing a StorCenter reset, or stopped,
-causing a full power down.
-.SH OPTIONS
-.TP
-\fB\-?\fR
-display this help and exit
-.TP
-\fB\-d\fR
-send send directly, stop/restart only
-.TP
-\fB\-p POWER\fR
-control soft power
-.br
-POWER=[run|off|restart]
-.TP
-\fB\-l LED\fR
-control LED state
-.br
-LED=[off|blue|red|blueflash|redflash|alternate|alternate3]
-.TP
-\fB\-r RATE\fR
-Rate the LED flashes (0<=RATE<256)
-.TP
-\fB\-f FAN\fR
-control fan operation
-.br
-FAN=[auto|on]
-.TP
-\fB\-h TEMP\fR
-Hot temp when FAN=auto should go on (0<=TEMP<256)
-.TP
-\fB\-c TEMP\fR
-Cold temp when FAN=auto should go off (0<=TEMP<256)
-.SH NOTES
-Care should be taken when changing the LED. The boot scripts and the 
-.B sccd
-daemon use LED colors to indicate boot and disk activity. Changing the LED can
-cause some of these functions to be disabled. 
-.SH AUTHOR
-Written by Philip Kufeldt.
-.SH "REPORTING BUGS"
-Report bugs at www.openprotium.org.
-.SH COPYRIGHT
-Copyright \(co 2006 Protium Computing, Inc.  All rights reserved.
-.br
-This is free software. Redistribution and use in source and binary forms, 
-with or without modification, are permitted provided that the following 
-conditions are met:
-.IP
-Redistributions of source code must retain the above copyright notice,this list of conditions and the following disclaimer.
-.br
-Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-.br
-All advertising materials mentioning features or use of this software must display the following acknowledgement: 
-.br
-	This product includes software developed by Protium Computing, Inc.
-.br 
-The name of Protium Computing, Inc. may not be used to endorse or promote products derived from this software without specific prior written permission.
-.PP
-.SH "SEE ALSO"
-The full documentation for
-.B scc 
-can be found at www.openprotium.org
-
diff --git a/packages/sccd/files/scc.c b/packages/sccd/files/scc.c
deleted file mode 100644
index b917bf1ee8..0000000000
--- a/packages/sccd/files/scc.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * Copyright (c) 2006
- *	Protium Computing, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Protium Computing, Inc.
- * 4. The name of Protium Computing, Inc. may not be used to endorse or 
- *    promote products derived from this software without specific prior 
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-#include <stdio.h>
-#include <fcntl.h>
-#include <time.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <strings.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/select.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <termios.h>
-
-#include "scc.h"
-
-char * prog;
-int initialize = 0;
-int verbose = 0;
-
-scc_cmd_t powercmds[] = {
- 	{	"a", 		0x61000000}, 
- 	{	"run", 		SCC_RUN}, 	
-	{	"off", 		SCC_STOP},
- 	{	"advoff", 	SCC_ADVISESTOP}, 
-	{	"restart", 	SCC_RESTART,},
- 	{	"advrestart", 	SCC_ADVISERESTART}, 
-	{	"reset", 	SCC_RESET,},
- 	{	"advreset", 	SCC_ADVISERESET}, 
-	{	"EOT",		-1}};
-
-scc_cmd_t ledcmds[] =   {	
-	{	"off", 		SCC_LEDOFF},
-	{	"blue", 	SCC_LEDBLUE},
-	{	"red", 		SCC_LEDRED},
-	{	"blueflash", 	SCC_LEDBLUEFLASH},
-	{	"redflash",	SCC_LEDREDFLASH},
-	{	"alternate", 	SCC_LEDALTERNATE1},
-	{	"alternate3", 	SCC_LEDALTERNATE3},
-	{	"EOT",		-1}};
-
-scc_cmd_t fancmds[]=   {	
-	{	"auto", 	SCC_FANAUTO},
-	{	"on", 		SCC_FANON},
-	{	"EOT",		-1}};
-
-void
-usage(void)
-{
-	int i;
-	scc_cmd_t *c;
-
-	fprintf(stderr,	"Usage: %s OPTIONS\n", prog);
-	fprintf(stderr,"%s controls the Iomega StorCenter's LED, fan and soft power.\n\n", prog);
-	fprintf(stderr,"  -?\t\tthis message\n");
-	fprintf(stderr,"  -v\t\tverbose, show all packets\n");
-	fprintf(stderr,"  -d\t\tsend send directly, stop/restart only\n");
-	fprintf(stderr,"\n  -p POWER\tcontrol soft power\n");
-	fprintf(stderr,"\t\tPOWER=[");
-	for (c = powercmds,i=0; c->scc_cmdval != -1; c++,i++) {
-		if (i) fprintf(stderr,"|");
-		fprintf(stderr,"%s", c->scc_cmd);
-	}
-	fprintf(stderr,"]\n\n");
-
-	fprintf(stderr,"  -l LED\tcontrol LED state\n");
-	fprintf(stderr,"\t\tLED=[");
-	for (c = ledcmds,i=0; c->scc_cmdval != -1; c++,i++) {
-		if (i) fprintf(stderr,"|");
-		fprintf(stderr,"%s", c->scc_cmd);
-	}
-	fprintf(stderr,"]\n  -r RATE\tRate the LED flashes (0<=RATE<256)\n\n");
-
-
-	fprintf(stderr,"  -f FAN\tcontrol fan operation\n");
-	fprintf(stderr,"\t\tFAN=[");
-	for (c = fancmds,i=0; c->scc_cmdval != -1; c++,i++) {
-		if (i) fprintf(stderr,"|");
-		fprintf(stderr,"%s", c->scc_cmd);
-	}
-	fprintf(stderr,"]\n  -h TEMP\tHot temp when FAN=auto should go on (0<=TEMP<256)\n");
-	fprintf(stderr,"  -c TEMP\tCold temp when FAN=auto should go off (0<=TEMP<256)\n");
-	
-	(void)exit(2);
-}
-
-int
-sendrecv(int fd, int *i, int *j)
-{
-	char			buf[8];
-	int   		rc;
-	fd_set		fds;
-	struct timeval	sec = {1, 0};
-	struct timespec	tenth_sec = {0, 100000000};
-
-
-	/* build the buffer */
-	*(int *)(buf) = *i;
-	*(int *)(buf + 4) = *j;
-
-	if (verbose) 
-		printf("Send: [0x%08x 0x%08x]\n", *i, *j);
-
-	if ((rc = write(fd, buf, 8)) != 8) {
-		perror("write failed failed");
-		return(-1);
-	}
-	
-	/* Wait for data */
-	FD_ZERO(&fds);
-	FD_SET(fd, &fds);
-	rc = select(1024, &fds, NULL, NULL, &sec);
-
-	if (rc == -1) {
-      	perror("select failed");
-		return (-1);
-	} else if (!rc) {
-		perror("select timedout");
-		return (-1);
-	} 
-
-	/* Consume it */
-	if ((rc = read(fd, buf, 8)) != 8) {
-		perror("read failed failed");
-		return(-1);
-	}
-
-	*i = *(int *)(buf);
-	*j = *(int *)(buf + 4);
-
-	if (verbose) 
-		printf("Recv: [0x%08x 0x%08x]\n", *i, *j);
-
-	/* Let it rest */
-	nanosleep(&tenth_sec, NULL);
-
-	return(0);
-}
-	
-int 
-setup_clnt()
-{
-	int s, len;
-	struct sockaddr_un remote;
-
-	if ((s = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) {
-		return(-1);
-        }
-
-	remote.sun_family = AF_UNIX;
-        strcpy(remote.sun_path, SCC_SOCKET);
-        len = strlen(remote.sun_path) + sizeof(remote.sun_family);
-        if (connect(s, (struct sockaddr *)&remote, len) == -1) {
-		return(-1);
-        }
-
-	return(s);
-}
-
-int 
-setup_cntlr(int *i, int *j)
-{
-	int	fd;
-	char	*dev = SCC_DEVICE;
-	struct termios	ti;
-
-	/* setup the serial connection to 9600, 8n1 */
-	if ((fd = open(dev, O_RDWR|O_NOCTTY)) < 0) {
-		perror("Open failed");
-		return(-1);
-	}
-
-	if (ioctl(fd, TCGETS, &ti) < 0) {
-		perror("TCGETS failed");
-		return(-1);
-	}
-	
-	if (ioctl(fd, TCFLSH, 0) < 0) {
-		perror("TCFLSH failed");
-		return(-1);
-	}	
-
-	ti.c_iflag = IGNPAR;
-	ti.c_oflag = 0;
-	ti.c_cflag = (B9600 | CS8 | CREAD | CLOCAL);
-	ti.c_lflag = 0;
-	ti.c_line = N_TTY; 
-	bzero(ti.c_cc, NCCS);
-	ti.c_cc[VMIN] = 0x08;
-
-	if (ioctl(fd, TCSETS, &ti) < 0) {
-		perror("TCSETS failed");
-		return(-1);
-	}
-	
-	if (verbose) printf("Resetting microcontroller\n");
-	*i = SCC_RESETW1;
-	*j = SCC_RESETW2;
-	scc_setval(i, SCC_IDMASK, SCC_HOST);
-	scc_setval(j, SCC_CKSUMMASK, (int)scc_cksum(i, j));
-	if (sendrecv(fd, i, j) < 0) 
-		return(-1); 
-
-	return(fd);
-}
-
-int 
-main(int argc, char *argv[])
-{
-
-	int	devfd, w1, w2, h1, h2;
-	int	coldtemp, hottemp, fancmd;
-	int	ledrate, ledcmd;
-	int	powercmd;
-	int	direct;
-	int	c;
-	char	buf[SCC_PACKETLEN];
-	scc_cmd_t	*ct;
-
-	extern char	*optarg;
- 	extern int	optind, opterr, optopt;
-
-	prog = argv[0];
-	fancmd = coldtemp = hottemp = -1;
-	ledcmd = ledrate = -1;
-	powercmd = -1;
-	direct = 0;
-	
-	while ((c = getopt(argc, argv, "c:df:h:l:p:r:wv?")) != EOF) {
-		switch (c) {
-		case 'c':
-			if (coldtemp != -1)  /* more than one -c arg */
-				usage();
-
-			coldtemp = atoi(optarg);
-			if ((coldtemp > 255) || (coldtemp < 0))
-				usage();
-			break;
-		case 'd':
-			direct = 1;
-			break;
-		case 'f':
-			if (fancmd != -1)  /* more than one -f arg */
-				usage();
-
-			for (ct = fancmds; ct->scc_cmdval != -1; ct++) {
-				if (!strcmp(ct->scc_cmd, optarg)) {
-					fancmd = ct->scc_cmdval;
-				}
-			}
-
-			if (fancmd == -1)  /* Failed to find the req */
-				usage();
-
-			break;
-		case 'h':
-			if (hottemp != -1)  /* more than one -h arg */
-				usage();
-
-			hottemp = atoi(optarg);
-			if ((hottemp > 255) || (hottemp < 0))
-				usage();
-			break;
-		case 'l':
-			if (ledcmd != -1)  /* more than one -l arg */
-				usage();
-
-			for (ct = ledcmds; ct->scc_cmdval != -1; ct++) {
-				if (!strcmp(ct->scc_cmd, optarg)) {
-					ledcmd = ct->scc_cmdval;
-				}
-			}
-
-			if (ledcmd == -1)  /* Failed to find the req */
-				usage();
-			break;
-		case 'p':
-			if (powercmd != -1)  /* more than one -p arg */
-				usage();
-
-			for (ct = powercmds; ct->scc_cmdval != -1; ct++) {
-				if (!strcmp(ct->scc_cmd, optarg)) {
-					powercmd = ct->scc_cmdval;
-				}
-			}
-
-			if (powercmd == -1)  /* Failed to find the req */
-				usage();
-			break;
-		case 'r':
-			if (ledrate != -1)  /* more than one -h arg */
-				usage();
-
-			ledrate = atoi(optarg);
-			if ((ledrate > 255) || (ledrate < 0))
-				usage();
-			break;
-		case 'v':
-			verbose=1;
-			break;
-		case '?':
-			usage();
-			break;
-
-		}
-	}
-
-	if (direct) {
-		/* 
-		 * Setup the cntlr connection 
-		 */
-		if ((devfd = setup_cntlr(&w1, &w2)) < 0)
-			exit(1);
-		scc_defaults(&w1, &w2);
-	} else {
-		/* 
-		 * Setup the clnt connection, if we get an connection
-		 * refused that means the daemon isn't listening.
-		 * so go direct
-		 */
-		w1 = 0;
-		w2 = 0;
-		if ((devfd = setup_clnt()) < 0) {
-			/* log it */
-			if ((devfd = setup_cntlr(&w1, &w2)) < 0)
-				exit(1);
-			direct = 1;
-			scc_defaults(&w1, &w2);
-		}
-	}
-	
-	/* 
-	 * Direct (direct to the cntlr):
-	 * w1 and w2 are setup with the default cntlr packet.
-	 * Now lets poke the command line args into the packet.
-	 *
-	 * Nondirect (via the daemon):
-	 * w1 and w2 are setup with nulls. The packet sent to the daemon 
-	 * contains only the changes to the current state.
-	 */
-	if (powercmd != -1) 
-		scc_setval(&w1, SCC_POWERMASK, powercmd);
-	if (ledcmd != -1)
-		scc_setval(&w1, SCC_LEDMASK, ledcmd);
-	if (ledrate != -1)
-		scc_setrate(&w1, SCC_LEDRATEMASK, SCC_LEDRATESHIFT, ledrate);
-	if (fancmd != -1)
-		scc_setval(&w1, SCC_FANMASK, fancmd);
-
-	if (coldtemp != -1)
-		scc_setrate(&w2, 
-			    SCC_FANTEMPOFFMASK, SCC_FANTEMPOFFSHIFT, coldtemp);
-	if (hottemp != -1)
-		scc_setrate(&w2, 
-			    SCC_FANTEMPONMASK, SCC_FANTEMPONSHIFT, hottemp);
-
-	scc_setval(&w2, SCC_IDMASK, SCC_HOST);
-	scc_setval(&w2, SCC_CKSUMMASK, (int)scc_cksum(&w1, &w2));
-
-
-	if (direct) {
-		if (verbose) {
-			printf("New State: \n");
-			scc_validate(&w1, &w2, verbose);
-		}
-
-		if (sendrecv(devfd, &w1, &w2) < 0) 
-			exit(1); 
-	} else {
-		*(int *)(&buf[0]) = w1;
-		*(int *)(&buf[4]) = w2;
-		
-		if (send(devfd, buf, SCC_PACKETLEN, 0) == -1) {
-			perror("send");
-			exit(1);
-		}
-	}
-
-	close(devfd);
-  	exit(0);
-}
diff --git a/packages/sccd/files/scc.h b/packages/sccd/files/scc.h
deleted file mode 100644
index b920791f66..0000000000
--- a/packages/sccd/files/scc.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef _SCC_H
-#define _SCC_H
-/*
- * Copyright (c) 2006
- *	Protium Computing, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Protium Computing, Inc.
- * 4. The name of Protium Computing, Inc. may not be used to endorse or 
- *    promote products derived from this software without specific prior 
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#define SCC_PIDFILE		"/var/run/sccd.pid"
-#define SCC_DEVICE		"/dev/ttyS1"
-#define SCC_SOCKET		"/dev/sccd"
-
-#define SCC_PACKETLEN		8
-
-#define SCC_RESETW1		0x23696f6d 
-#define SCC_RESETW2		0x65676100
-#define SCC_QUERYW1		0x00000000
-#define SCC_QUERYW2		QUERYW1
-
-/* word 1 defines */
-#define SCC_RUN			0x62000000
-#define SCC_STOP	  	0x63000000
-#define SCC_ADVISESTOP		0x64000000
-#define SCC_RESTART		0x65000000
-#define SCC_ADVISERESTART	0x66000000
-#define SCC_RESET		0x67000000
-#define SCC_ADVISERESET		0x68000000
-#define SCC_POWERMASK		0xFF000000
-
-#define SCC_LEDOFF		0x00610000
-#define SCC_LEDBLUE		0x00620000
-#define SCC_LEDRED		0x00630000
-#define SCC_LEDBLUEFLASH	0x00640000
-#define SCC_LEDREDFLASH		0x00650000
-#define SCC_LEDALTERNATE1	0x00660000
-#define SCC_LEDALTERNATE3	0x00670000
-#define SCC_LEDMASK		0x00FF0000
-
-#define SCC_LEDRATEMASK		0x0000FF00
-#define SCC_LEDRATESHIFT	8
-#define SCC_LEDRATEHI		40		/* limit: where flash == on */
-#define SCC_LEDRATELO		0		/* limit: where flash == off */
-#define SCC_LEDIORATE		20
-
-#define SCC_FANAUTO		0x00000061
-#define SCC_FANON 		0x00000062
-#define SCC_FANMASK		0x000000FF
-
-/* word 2 defines */
-#define SCC_FANTEMPONMASK	0xFF000000
-#define SCC_FANTEMPONSHIFT	24
-#define SCC_FANTEMPONHI		60		/* limit: board on fire 140F */
-
-#define SCC_FANTEMPOFFMASK	0x00FF0000
-#define SCC_FANTEMPOFFSHIFT	16
-#define SCC_FANTEMPONLO		15		/* limit: never turn off 60F */
-#define SCC_FANTEMPDIFF		2		/* limit: if the diff between 
-						   hi and lo is < then this the
-						   fan could rapidly sccillate
-						   or never turn on */
-#define SCC_HOST		0x00000700
-#define SCC_CTLR00		0x00000000
-#define SCC_CTLR12		0x00001200
-#define SCC_IDMASK		0x0000FF00
-
-#define SCC_CKSUMMASK		0x000000FF
-
-#define SCC_POWERDEFAULT	SCC_RUN
-#define SCC_LEDDEFAULT		SCC_LEDRED
-#define SCC_LEDRATEDEFAULT	10
-#define SCC_FANDEFAULT		SCC_FANAUTO
-#define SCC_FANTEMPONDEFAULT	50
-#define SCC_FANTEMPOFFDEFAULT	45
-
-struct scc_cmd_table {
-	char	*scc_cmd;
-	int 	scc_cmdval;
-};
-
-typedef struct scc_cmd_table scc_cmd_t;
-
-char scc_cksum(int *, int *);
-int  scc_validate(int *, int *, int);
-int  scc_setval(int *, int, int);
-int  scc_setrate(int *, int, int, int);
-int  scc_defaults(int *, int *);
-int  scc_daemonize(int);
-int  disk_activity(void);
-
-
-#endif /* _SCC_H */
-
diff --git a/packages/sccd/files/sccd.c b/packages/sccd/files/sccd.c
deleted file mode 100644
index 4f74c1d49c..0000000000
--- a/packages/sccd/files/sccd.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * Copyright (c) 2006
- *	Protium Computing, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Protium Computing, Inc.
- * 4. The name of Protium Computing, Inc. may not be used to endorse or 
- *    promote products derived from this software without specific prior 
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY PROTIUM COMPUTING ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL PROTIUM COMPUTING BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-#include <stdio.h>
-#include <fcntl.h>
-#include <time.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <strings.h>
-#include <errno.h>
-#include <utmp.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/select.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <sys/un.h>
-#include <sys/syslog.h>
-#include <sys/param.h>
-#include <termios.h>
-
-#include "scc.h"
-
-#define HALT	"/sbin/halt"
-#define REBOOT	"/sbin/reboot"
-
-char * prog;
-int verbose = 0;
-
-extern int scc_die;
-
-void
-usage(void)
-{
-	fprintf(stderr,	"Usage: %s OPTIONS\n", prog);
-	fprintf(stderr,
-		"StorCenter Control Daemon manages the StorCenter's LED, fan and soft power.\n\n");
-	fprintf(stderr,"  -?\t\tthis message\n");
-	fprintf(stderr,"  -h\t\tthis message\n");
-	fprintf(stderr,"  -c\t\tallow core files\n");
-	fprintf(stderr,"  -f\t\trun in the foreground\n");
-	fprintf(stderr,"  -v\t\tverbose, show all packets (must be used with -f)\n");
-	(void)exit(2);
-}
-
-int
-sendrecv(int fd, int *i, int *j)
-{
-	char		buf[8];
-	int   		rc;
-	fd_set		fds;
-	struct timeval	sec = {1, 0};
-	struct timespec	tenth_sec = {0, 100000};
-
-
-	/* build the buffer */
-	*(int *)(buf) = *i;
-	*(int *)(buf + 4) = *j;
-
-	if (verbose) 
-		printf("Send: [0x%08x 0x%08x]\n", *i, *j);
-
-	if ((rc = write(fd, buf, 8)) != 8) {
-		syslog(LOG_ERR, "Write failed to controller");
-		return(-1);
-	}
-	
-	/* Wait for data */
-	FD_ZERO(&fds);
-	FD_SET(fd, &fds);
-	rc = select(1024, &fds, NULL, NULL, &sec);
-
-	if (rc == -1) {
-		syslog(LOG_ERR, "Controller select failed");
-		return (-1);
-	} else if (!rc) {
-		syslog(LOG_ERR, "Controller timeout");
-		return (-1);
-	} 
-
-	/* Consume it */
-	if ((rc = read(fd, buf, 8)) != 8) {
-		syslog(LOG_ERR, "Read from controller failed");
-		return(-1);
-	}
-
-	*i = *(int *)(buf);
-	*j = *(int *)(buf + 4);
-
-	if (verbose) 
-		printf("Recv: [0x%08x 0x%08x]\n", *i, *j);
-
-	/* Let it rest */
-	nanosleep(&tenth_sec, NULL);
-
-	return(0);
-}
-	
-int 
-setup_clnt()
-{
-	int s;
-	struct sockaddr_un local;
-	int len;
-
-	if ((s = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) {
-            perror("socket");
-            return(-1);
-        }
-
-        local.sun_family = AF_UNIX;
-        strcpy(local.sun_path, SCC_SOCKET);
-        unlink(local.sun_path);
-
-        len = strlen(local.sun_path) + sizeof(local.sun_family);
-        if (bind(s, (struct sockaddr *)&local, len) == -1) {
-		perror("bind");
-		close(s);
-		return(-1);
-        }
-
-        if (listen(s, 5) == -1) {
-		perror("listen");
-		close(s);
-		return(-1);
-        }	
-
-	/* Force the permission on the unix socket */
-        if (chmod(SCC_SOCKET, (S_IWUSR | S_IRUSR)) < 0) {
-                perror("chmod socket");
-        }
-
-	return(s);
-}
-
-int 
-setup_cntlr()
-{
-	int	i, j, fd;
-	char	*dev = SCC_DEVICE;
-	struct termios	ti;
-
-	/* setup the serial connection to 9600, 8n1 */
-	if ((fd = open(dev, O_RDWR|O_NOCTTY)) < 0) {
-		perror("Open failed");
-		return(-1);
-	}
-
-	if (ioctl(fd, TCGETS, &ti) < 0) {
-		perror("TCGETS failed");
-		return(-1);
-	}
-	
-	if (ioctl(fd, TCFLSH, 0) < 0) {
-		perror("TCFLSH failed");
-		return(-1);
-	}	
-
-	ti.c_iflag = IGNPAR;
-	ti.c_oflag = 0;
-	ti.c_cflag = (B9600 | CS8 | CREAD | CLOCAL);
-	ti.c_lflag = 0;
-	ti.c_line = N_TTY; 
-	bzero(ti.c_cc, NCCS);
-	ti.c_cc[VMIN] = 0x08;
-
-	if (ioctl(fd, TCSETS, &ti) < 0) {
-		perror("TCSETS failed");
-		return(-1);
-	}
-	
-	if (verbose) printf("Resetting microcontroller\n");
-	i = SCC_RESETW1;
-	j = SCC_RESETW2;
-	scc_setval(&j, SCC_CKSUMMASK, (int)scc_cksum(&i, &j));
-	if (sendrecv(fd, &i, &j) < 0) {
-		return(-1); 
-	}
-
-	return(fd);
-}
-
-int
-handle_clnt(int clnt, int *w1, int *w2)
-{
-	char	buf[SCC_PACKETLEN];
-	int	s, t, i, j, *x, *y;
-	struct sockaddr_un remote;
-
-	t = sizeof(remote);
-	s = accept(clnt, (struct sockaddr *)&remote, &t);
-	if (s < 0) {
-		syslog(LOG_ERR, "Unable to accept client");
-		return(-1);
-	}
-
-	if (recv(s, buf, SCC_PACKETLEN, 0) != SCC_PACKETLEN) {
-		return(-1);
-	}
-	close(s);
-
-	x = (int *)&buf[0];
-	y = (int *)&buf[4];
-
-	/* 
-	 * Clients only send fields they want enacted. This allows this daemon
-	 * to keep the other values constant without informing the clients
-	 * of the current setting. It allows the protocol to unidirectional.
-	 * 
-	 * Take the data from the client and add it to the current
-	 * state then validate the resulting state.  If valid, return
-	 * the new state. If not don't corrupt the existing state.
-	 */
-	i = *w1;
-	j = *w2;
-
-	if (*x & SCC_POWERMASK)
-		scc_setval(&i, SCC_POWERMASK, (*x & SCC_POWERMASK));
-	if (*x & SCC_LEDMASK)
-		scc_setval(&i, SCC_LEDMASK,  (*x & SCC_LEDMASK));
-	if (*x & SCC_LEDRATEMASK)
-		scc_setval(&i, SCC_LEDRATEMASK, (*x & SCC_LEDRATEMASK));
-	if (*x & SCC_FANMASK)
-		scc_setval(&i, SCC_FANMASK, (*x & SCC_FANMASK));
-
-	if (*y & SCC_FANTEMPONMASK)
-		scc_setval(&j, SCC_FANTEMPONMASK, (*y & SCC_FANTEMPONMASK));
-	if (*y & SCC_FANTEMPOFFMASK)
-		scc_setval(&j, SCC_FANTEMPOFFMASK, (*y & SCC_FANTEMPOFFMASK));
-	scc_setval(&j, SCC_IDMASK, SCC_HOST);
-	scc_setval(&j, SCC_CKSUMMASK, (int)scc_cksum(&i, &j));
-
-	if (scc_validate(&i, &j, verbose) < 0) {
-		/* log it and return */
-		return(-1);
-	}
-
-	/* 
-	 * If we are here we got a good packet, return it.
-	 */
-	*w1 = i;
-	*w2 = j;
-	return(0);
-}
-
-#ifdef NOTUSED
-char
-runlevel()
-{
-        struct utmp *ut;
-        time_t boot;
-
-        /*
-         * Find last boot time
-         */
-        time(&boot);
-        boot -= (times(NULL) / HZ);
-
-        setutent();
-        while ((ut = getutent()) != NULL) {
-                /*
-                 * Find runlevel after our last boot
-                 */
-                if (ut->ut_type == RUN_LVL && ut->ut_time > boot)
-			return(ut->ut_pid & 0xff);
-        }
-        endutent();
-
-	return(0xff);
-}
-#endif 
-
-int
-work_loop(int cntlr, int clnt)
-{
-	
-	int   		rc, w1, w2, c1, c2, saverate;
-	int		shutdown_called = 0;
-	pid_t		pid;
-	fd_set		fds;
-	struct timeval	tv;
-
-	/* 
-	 * If we are booting set to red flash and 
-	 * wait for someone to change it.
-	 * If we are already in runlevel 5 then set it to blue
-	 */
-	scc_defaults(&w1, &w2);
-	scc_setval(&w1, SCC_LEDMASK, SCC_LEDREDFLASH);
-	scc_setval(&w2, SCC_IDMASK, SCC_HOST);
-	scc_setval(&w2, SCC_CKSUMMASK, (int)scc_cksum(&w1, &w2));
-
-	if (verbose) {
-		printf("New State: \n");
-		scc_validate(&w1, &w2, verbose);
-	}
-
-	if (sendrecv(cntlr, &w1, &w2) < 0) { 
-		/* log then carry on */
-	}
-	
-	while (!scc_die) {
-		/* 
-		 * Wait for data. How long? Well detecting soft power
-		 * events should happen fairly quickly, 1 second between
-		 * probes should be enough, but detecting disk activity 
-		 * probably needs to be a little faster. So we try 0.5s or 
-		 * 500,000 micro seconds. If that steals too much CPU 
-		 * then we backoff here.
-		 */
-		FD_ZERO(&fds);
-		FD_SET(clnt, &fds);
-		tv.tv_sec = 0;
-		tv.tv_usec = 500000; 
-		rc = select(1024, &fds, NULL, NULL, &tv);
-
-		if (rc < 0) {
-			/* Select failed try again */
-			continue;
-		} else if (rc) {
-			/* Got a clnt request */
-			if (handle_clnt(clnt, &w1, &w2) < 0) 
-				continue;
-		} else {
-			/* timeout - just fallthrough to refresh ctlr */
-		}
-
-		/*
-		 * Here's how we do blinking lights for disk activity.
-		 * If there is disk activity and the LED is blue, then
-		 * set the led to blueflash and the rate to io rate.
-		 * Next time through if there is still activity, the 
-		 * LED is unchanged. If no activity and the led is flashing
-		 * blue then return it to solid blue and restore the rate.
-		 */
-		if (disk_activity()) {
-			if ((w1 & SCC_LEDMASK) == SCC_LEDBLUE) {
-				saverate = (w1 & SCC_LEDRATEMASK);
-				scc_setval(&w1, SCC_LEDMASK, SCC_LEDBLUEFLASH);
-				scc_setrate(&w1, SCC_LEDRATEMASK, 
-					    SCC_LEDRATESHIFT, SCC_LEDIORATE);
-			}
-		} else {
-			if ((w1 & SCC_LEDMASK) == SCC_LEDBLUEFLASH) {
-				scc_setval(&w1, SCC_LEDMASK, SCC_LEDBLUE);
-				scc_setval(&w1, SCC_LEDRATEMASK, saverate);
-			}
-		}
-	
-		/* 
-		 * Getting here because of a timeout or client request
-		 * in either case refresh the cntlr. Don't use w1 and w2
-		 * to refresh, cause the daemon should not incorporate
-		 * the controller's view of the state into the daemon's
-		 * view. Only a client should alter w1 and w2.
-		 */
-		c1 = w1;
-		c2 = w2;
-		if (sendrecv(cntlr, &c1, &c2) < 0) { 
-			continue;
-		}
-		
-		/*
-		 * Now examine the packet from the controller to see
-		 * if action needs to be taken.
-		 * If the power state is either: stop, restart or reset
-		 * start shutting down the box. Once shutdown (reboot or halt)
-		 * has beed call don't do it again.
-		 */
-		if (shutdown_called) 
-			continue;
-
-		switch (c1 & SCC_POWERMASK) {
-		case SCC_STOP:
-			/* exec halt */
-			syslog(LOG_INFO, "Halt requested");
-			if ((pid = fork()) == -1) {
-				break;
-			}
-
-			if (pid == 0) {
-				/* i am child */
-				char *argv[] = {HALT, NULL};
-				execv(HALT, argv);
-				exit(EXIT_FAILURE);
-			}
-
-			shutdown_called = 1;
-			break;
-
-		case SCC_RESTART:
-		case SCC_RESET:
-			/* exec reboot */
-			syslog(LOG_INFO, "Reboot requested");
-			if ((pid = fork()) == -1) {
-				break;
-			}
-			if (pid == 0) {
-				/* i am child */
-				char *argv[] = {REBOOT, NULL};
-				execv(REBOOT, argv);
-				exit(EXIT_FAILURE);
-			}
-
-			shutdown_called = 1;
-			break;
-			
-		default:
-			/* Nothing to do */
-			break;
-		}
-	}
-}
-
-int 
-main(int argc, char *argv[])
-{
-
-	int	cntlr, clnt, w1, w2;
-	int	c, daemon, cores;
-
-	struct stat	st;
-	extern char	*optarg;
- 	extern int	optind, opterr, optopt;
-
-	prog = argv[0];
-	daemon = 1;
-	cores = 0;
-
-	while ((c = getopt(argc, argv, "cfhv?")) != EOF) {
-		switch (c) {
-		case 'h':
-			usage();
-			break;
-		case 'c':
-			cores=1;
-			break;
-		case 'f':
-			daemon=0;
-			break;
-		case 'v':
-			verbose=1;
-			break;
-		case '?':
-			usage();
-			break;
-
-		}
-	}
-
-	if (verbose && daemon) 
-		usage();
-
-	if (stat(HALT, &st) < 0) {
-		perror("Couldn't find halt");
-		exit(EXIT_FAILURE);
-	}
-
-	if (stat(REBOOT, &st) < 0) {
-		perror("Couldn't find reboot");
-		exit(EXIT_FAILURE);
-	}
-	
-	if (daemon) {
-		if (scc_daemonize(cores) < 0)
-			exit(EXIT_FAILURE);
-	} else {
-		/*
-		 * Open syslog
-		 */
-		openlog("sccd", LOG_PID, LOG_DAEMON);
-		syslog(LOG_INFO, "Starting");
-	}
-
-	/* 
-	 * Setup the controller connection
-	 */
-	if ((cntlr = setup_cntlr()) < 0)
-		exit(EXIT_FAILURE);
-	
-	/* 
-	 * Setup the client connection
-	 */
-	if ((clnt = setup_clnt()) < 0)
-		exit(EXIT_FAILURE);
-	
-	work_loop(cntlr, clnt);
-
-	close(cntlr);
-	close(clnt);
-	unlink(SCC_PIDFILE);
-  	exit(EXIT_SUCCESS);
-}
-