privoxy: added 3.0.3 - close #1419

3 files changed, 1137 insertions, 0 deletions

diff --git a/packages/privoxy/files/.mtn2git_empty b/packages/privoxy/files/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/privoxy/files/.mtn2git_empty
diff --git a/packages/privoxy/files/privoxy.conf b/packages/privoxy/files/privoxy.conf
new file mode 100644
index 0000000000..7e1a1f891c
--- /dev/null
+++ b/packages/privoxy/files/privoxy.conf
@@ -0,0 +1,1088 @@
+#        Sample Configuration File for Privoxy
+#
+#  Copyright (C) 2001-2004 Privoxy Developers http://privoxy.org
+#
+#
+#  Modified by Bastian Ballmann <balle@chaostal.de> for use 
+#  with Tor and to provide maximum privacy
+#
+#  $Id: config,v $
+#
+####################################################################
+#                                                                  #
+#                      Table of Contents                           #
+#                                                                  #
+#        I. INTRODUCTION                                           #
+#       II. FORMAT OF THE CONFIGURATION FILE                       #
+#                                                                  #
+#        1. CONFIGURATION AND LOG FILE LOCATIONS                   #
+#        2. LOCAL SET-UP DOCUMENTATION                             #
+#        3. DEBUGGING                                              #
+#        4. ACCESS CONTROL AND SECURITY                            #
+#        5. FORWARDING                                             #
+#        6. WINDOWS GUI OPTIONS                                    #
+#                                                                  #
+####################################################################
+#
+#
+#  I. INTRODUCTION
+#   ===============
+#
+#  This file holds the Privoxy configuration. If you modify this file,
+#  you will need to send a couple of requests to the proxy before any
+#  changes take effect.
+#
+#  When starting Privoxy on Unix systems, give the name of this file as
+#  an argument. On Windows systems, Privoxy will look for this file
+#  with the name 'config.txt' in the same directory where Privoxy
+#  is installed.
+#
+#
+#  II. FORMAT OF THE CONFIGURATION FILE
+#  ====================================
+#
+#  Configuration lines consist of an initial keyword followed by a
+#  list of values, all separated by whitespace (any number of spaces
+#  or tabs). For example,
+#
+#  actionsfile default.action
+#
+#  Indicates that the actionsfile is named 'default.action'.
+#
+#  The '#' indicates a comment. Any part of a line following a '#'
+#  is ignored, except if the '#' is preceded by a '\'.
+#
+#  Thus, by placing a # at the start of an existing configuration line,
+#  you can make it a comment and it will be treated as if it weren't
+#  there. This is called "commenting out" an option and can be useful.
+#
+#  Note that commenting out and option and leaving it at its default
+#  are two completely different things! Most options behave very
+#  differently when unset.  See the the "Effect if unset" explanation
+#  in each option's description for details.
+#
+#  Long lines can be continued on the next line by using a `\' as the
+#  last character.
+#
+
+#
+#  1. CONFIGURATION AND LOG FILE LOCATIONS
+#  =======================================
+#
+#  Privoxy can (and normally does) use a number of other files for
+#  additional configuration, help and logging. This section of the
+#  configuration file tells Privoxy where to find those other files.
+#
+#  The user running Privoxy, must have read permission for all
+#  configuration files, and write permission to any files that would
+#  be modified, such as log files and actions files.
+#
+
+#
+#  1.1. confdir
+#  ============
+#
+#  Specifies:
+#
+#      The directory where the other configuration files are located
+#
+#  Type of value:
+#
+#      Path name
+#
+#  Default value:
+#
+#      /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+#  Effect if unset:
+#
+#      Mandatory
+#
+#  Notes:
+#
+#      No trailing "/", please
+#
+#      When development goes modular and multi-user, the blocker,
+#      filter, and per-user config will be stored in subdirectories of
+#      "confdir". For now, the configuration directory structure is
+#      flat, except for confdir/templates, where the HTML templates
+#      for CGI output reside (e.g. Privoxy's 404 error page).
+#
+confdir /etc/privoxy
+
+#
+#  1.2. logdir
+#  ===========
+#
+#  Specifies:
+#
+#      The directory where all logging takes place (i.e. where logfile
+#      and jarfile are located)
+#
+#  Type of value:
+#
+#      Path name
+#
+#  Default value:
+#
+#      /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+#  Effect if unset:
+#
+#      Mandatory
+#
+#  Notes:
+#
+#      No trailing "/", please
+#
+#logdir /var/log/privoxy
+
+# We dont want logging
+logdir
+
+#
+#  1.3. actionsfile
+#  ================
+#
+#  Specifies:
+#
+#      The actions file(s) to use
+#
+#  Type of value:
+#
+#      File name, relative to confdir, without the .action suffix
+#
+#  Default values:
+#
+#        standard     # Internal purposes, no editing recommended
+#
+#        default      # Main actions file
+#
+#        user         # User customizations
+#
+#  Effect if unset:
+#
+#      No actions are taken at all. Simple neutral proxying.
+#
+#  Notes:
+#
+#      Multiple actionsfile lines are permitted, and are in fact
+#      recommended!
+#
+#      The default values include standard.action, which is used
+#      for internal purposes and should be loaded, default.action,
+#      which is the "main" actions file maintained by the developers,
+#      and user.action, where you can make your personal additions.
+#
+#      Actions files are where all the per site and per URL
+#      configuration is done for ad blocking, cookie management,
+#      privacy considerations, etc. There is no point in using Privoxy
+#      without at least one actions file.
+#
+actionsfile standard  # Internal purpose, recommended
+actionsfile default   # Main actions file
+actionsfile user      # User customizations
+
+#
+#  1.4. filterfile
+#  ===============
+#
+#  Specifies:
+#
+#      The filter file to use
+#
+#  Type of value:
+#
+#      File name, relative to confdir
+#
+#  Default value:
+#
+#      default.filter (Unix) or default.filter.txt (Windows)
+#
+#  Effect if unset:
+#
+#      No textual content filtering takes place, i.e. all +filter{name}
+#      actions in the actions files are turned neutral.
+#
+#  Notes:
+#
+#      The filter file contains content modification rules that use
+#      regular expressions. These rules permit powerful changes on the
+#      content of Web pages, e.g., you could disable your favorite
+#      JavaScript annoyances, re-write the actual displayed text,
+#      or just have some fun replacing "Microsoft" with "MicroSuck"
+#      wherever it appears on a Web page.
+#
+#      The +filter{name} actions rely on the relevant filter (name)
+#      to be defined in the filter file!
+#
+#      A pre-defined filter file called default.filter that contains
+#      a bunch of handy filters for common problems is included in the
+#      distribution. See the section on the filter action for a list.
+#
+filterfile default.filter
+
+#
+#  1.5. logfile
+#  ============
+#
+#  Specifies:
+#
+#      The log file to use
+#
+#  Type of value:
+#
+#      File name, relative to logdir
+#
+#  Default value:
+#
+#      logfile (Unix) or privoxy.log (Windows)
+#
+#  Effect if unset:
+#
+#      No log file is used, all log messages go to the console (STDERR).
+#
+#  Notes:
+#
+#      The windows version will additionally log to the console.
+#
+#      The logfile is where all logging and error messages are
+#      written. The level of detail and number of messages are set with
+#      the debug option (see below).  The logfile can be useful for
+#      tracking down a problem with Privoxy (e.g., it's not blocking
+#      an ad you think it should block) but in most cases you probably
+#      will never look at it.
+#
+#      Your logfile will grow indefinitely, and you will probably
+#      want to periodically remove it. On Unix systems, you can do
+#      this with a cron job (see "man cron"). For Red Hat, a logrotate
+#      script has been included.
+#
+#      On SuSE Linux systems, you can place a line like
+#      "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
+#      with the effect that cron.daily will automatically archive,
+#      gzip, and empty the log, when it exceeds 1M size.
+#
+#      Any log files must be writable by whatever user Privoxy is
+#      being run as (default on UNIX, user id is "privoxy").
+#
+#logfile logfile
+
+# We dont want logging
+logfile
+
+#
+#  1.6. jarfile
+#  ============
+#
+#  Specifies:
+#
+#      The file to store intercepted cookies in
+#
+#  Type of value:
+#
+#      File name, relative to logdir
+#
+#  Default value:
+#
+#      jarfile (Unix) or privoxy.jar (Windows)
+#
+#  Effect if unset:
+#
+#      Intercepted cookies are not stored at all.
+#
+#  Notes:
+#
+#      The jarfile may grow to ridiculous sizes over time.
+#
+#jarfile jarfile
+jarfile
+
+#
+#  1.7. trustfile
+#  ==============
+#
+#  Specifies:
+#
+#      The trust file to use
+#
+#  Type of value:
+#
+#      File name, relative to confdir
+#
+#  Default value:
+#
+#      Unset (commented out). When activated: trust (Unix) or trust.txt
+#      (Windows)
+#
+#  Effect if unset:
+#
+#      The entire trust mechanism is turned off.
+#
+#  Notes:
+#
+#      The trust mechanism is an experimental feature for building
+#      white-lists and should be used with care. It is NOT recommended
+#      for the casual user.
+#
+#      If you specify a trust file, Privoxy will only allow access to
+#      sites that are specified in the trustfile. Sites can be listed
+#      in one of two ways:
+#
+#      Prepending a ~ character limits access to this site only (and
+#      any sub-paths within this site), e.g. ~www.example.com.
+#
+#      Or, you can designate sites as trusted referrers, by prepending
+#      the name with a + character. The effect is that access to
+#      untrusted sites will be granted -- but only if a link from this
+#      trusted referrer was used. The link target will then be added
+#      to the "trustfile" so that future, direct accesses will be
+#      granted. Sites added via this mechanism do not become trusted
+#      referrers themselves (i.e. they are added with a ~ designation).
+#
+#      If you use the + operator in the trust file, it may grow
+#      considerably over time.
+#
+#      It is recommended that Privoxy be compiled with the
+#      --disable-force, --disable-toggle and --disable-editor options,
+#      if this feature is to be used.
+#
+#      Possible applications include limiting Internet access for
+#      children.
+#
+#trustfile trust
+
+#
+#  2. LOCAL SET-UP DOCUMENTATION
+#  =============================
+#
+#  If you intend to operate Privoxy for more users than just yourself,
+#  it might be a good idea to let them know how to reach you, what
+#  you block and why you do that, your policies, etc.
+#
+
+#
+#  2.1. user-manual
+#  ================
+#
+#  Specifies:
+#
+#      Location of the Privoxy User Manual.
+#
+#  Type of value:
+#
+#      A fully qualified URI
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      http://www.privoxy.org/version/user-manual/ will be used,
+#      where version is the Privoxy version.
+#
+#  Notes:
+#
+#      The User Manual URI is used for help links from some of the
+#      internal CGI pages. The manual itself is normally packaged
+#      with the binary distributions, so you probably want to set this
+#      to a locally installed copy. For multi-user setups, you could
+#      provide a copy on a local webserver for all your users and use
+#      the corresponding URL here.
+#
+#      Examples:
+#
+#      Unix, in local filesystem:
+#
+#       user-manual file:///usr/share/doc/privoxy-3.0.1/user-manual/index.html
+#
+#      Windows, in local filesystem, must use forward slash notation,
+#      and %20 to denote spaces in path names:
+#
+#       user-manual file:///c:/some%20dir/privoxy/user-manual/index.html
+#
+#      Windows, UNC notation (forward slashes required again):
+#
+#       user-manual file://///some-server/some-path/privoxy/user-manual/index.html
+#
+#      Any platform, on local webserver (called "local-webserver"):
+#
+#       user-manual  http://local-webserver/privoxy-user-manual/
+#
+#      WARNING!!!
+#
+#          If set, this option should be the first option in the config
+#          file, because it is used while the config file is being read.
+#
+user-manual /usr/share/doc/privoxy/user-manual
+
+#
+#  2.2. trust-info-url
+#  ===================
+#
+#  Specifies:
+#
+#      A URL to be displayed in the error page that users will see if
+#      access to an untrusted page is denied.
+#
+#  Type of value:
+#
+#      URL
+#
+#  Default value:
+#
+#      Two example URL are provided
+#
+#  Effect if unset:
+#
+#      No links are displayed on the "untrusted" error page.
+#
+#  Notes:
+#
+#      The value of this option only matters if the experimental trust
+#      mechanism has been activated. (See trustfile above.)
+#
+#      If you use the trust mechanism, it is a good idea to write
+#      up some on-line documentation about your trust policy and to
+#      specify the URL(s) here. Use multiple times for multiple URLs.
+#
+#      The URL(s) should be added to the trustfile as well, so users
+#      don't end up locked out from the information on why they were
+#      locked out in the first place!
+#
+#trust-info-url  http://www.example.com/why_we_block.html
+#trust-info-url  http://www.example.com/what_we_allow.html
+
+#
+#  2.3. admin-address
+#  ==================
+#
+#  Specifies:
+#
+#      An email address to reach the proxy administrator.
+#
+#  Type of value:
+#
+#      Email address
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      No email address is displayed on error pages and the CGI user
+#      interface.
+#
+#  Notes:
+#
+#      If both admin-address and proxy-info-url are unset, the whole
+#      "Local Privoxy Support" box on all generated pages will not
+#      be shown.
+#
+#admin-address privoxy-admin@example.com
+
+#
+#  2.4. proxy-info-url
+#  ===================
+#
+#  Specifies:
+#
+#      A URL to documentation about the local Privoxy setup,
+#      configuration or policies.
+#
+#  Type of value:
+#
+#      URL
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      No link to local documentation is displayed on error pages and
+#      the CGI user interface.
+#
+#  Notes:
+#
+#      If both admin-address and proxy-info-url are unset, the whole
+#      "Local Privoxy Support" box on all generated pages will not
+#      be shown.
+#
+#      This URL shouldn't be blocked ;-)
+#
+#proxy-info-url http://www.example.com/proxy-service.html
+
+#
+#  3. DEBUGGING
+#  ============
+#
+#  These options are mainly useful when tracing a problem. Note that
+#  you might also want to invoke Privoxy with the --no-daemon command
+#  line option when debugging.
+#
+
+#
+#  3.1. debug
+#  ==========
+#
+#  Specifies:
+#
+#      Key values that determine what information gets logged to
+#      the logfile.
+#
+#  Type of value:
+#
+#      Integer values
+#
+#  Default value:
+#
+#      12289 (i.e.: URLs plus informational and warning messages)
+#
+#  Effect if unset:
+#
+#      Nothing gets logged.
+#
+#  Notes:
+#
+#      The available debug levels are:
+#
+#          debug         1 # show each GET/POST/CONNECT request
+#          debug         2 # show each connection status
+#          debug         4 # show I/O status
+#          debug         8 # show header parsing
+#          debug        16 # log all data into the logfile
+#          debug        32 # debug force feature
+#          debug        64 # debug regular expression filter
+#          debug       128 # debug fast redirects
+#          debug       256 # debug GIF de-animation
+#          debug       512 # Common Log Format
+#          debug      1024 # debug kill pop-ups
+#          debug      2048 # CGI user interface
+#          debug      4096 # Startup banner and warnings.
+#          debug      8192 # Non-fatal errors
+#
+#      To select multiple debug levels, you can either add them or
+#      use multiple debug lines.
+#
+#      A debug level of 1 is informative because it will show you each
+#      request as it happens. 1, 4096 and 8192 are highly recommended
+#      so that you will notice when things go wrong. The other levels
+#      are probably only of interest if you are hunting down a specific
+#      problem. They can produce a hell of an output (especially 16).
+#
+#      The reporting of fatal errors (i.e. ones which crash Privoxy)
+#      is always on and cannot be disabled.
+#
+#      If you want to use CLF (Common Log Format), you should set
+#      "debug 512" ONLY and not enable anything else.
+#
+#debug   1    # show each GET/POST/CONNECT request
+#debug   4096 # Startup banner and warnings
+debug   8192 # Errors - *we highly recommended enabling this*
+
+#
+#  3.2. single-threaded
+#  ====================
+#
+#  Specifies:
+#
+#      Whether to run only one server thread
+#
+#  Type of value:
+#
+#      None
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      Multi-threaded (or, where unavailable: forked) operation,
+#      i.e. the ability to serve multiple requests simultaneously.
+#
+#  Notes:
+#
+#      This option is only there for debug purposes and you should
+#      never need to use it. It will drastically reduce performance.
+#
+#single-threaded
+
+#
+#  4. ACCESS CONTROL AND SECURITY
+#  ==============================
+#
+#  This section of the config file controls the security-relevant
+#  aspects of Privoxy's configuration.
+#
+
+#
+#  4.1. listen-address
+#  ===================
+#
+#  Specifies:
+#
+#      The IP address and TCP port on which Privoxy will listen for
+#      client requests.
+#
+#  Type of value:
+#
+#      [IP-Address]:Port
+#
+#  Default value:
+#
+#      127.0.0.1:8118
+#
+#  Effect if unset:
+#
+#      Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
+#      recommended for home users who run Privoxy on the same machine
+#      as their browser.
+#
+#  Notes:
+#
+#      You will need to configure your browser(s) to this proxy address
+#      and port.
+#
+#      If you already have another service running on port 8118, or
+#      if you want to serve requests from other machines (e.g. on your
+#      local network) as well, you will need to override the default.
+#
+#      If you leave out the IP address, Privoxy will bind to all
+#      interfaces (addresses) on your machine and may become reachable
+#      from the Internet. In that case, consider using access control
+#      lists (ACL's, see below), and/or a firewall.
+#
+#      If you open Privoxy to untrusted users, you will also want
+#      to turn off the enable-edit-actions and enable-remote-toggle
+#      options!
+#
+#  Example:
+#
+#      Suppose you are running Privoxy on a machine which has the
+#      address 192.168.0.1 on your local private network (192.168.0.0)
+#      and has another outside connection with a different address. You
+#      want it to serve requests from inside only:
+#
+#        listen-address  192.168.0.1:8118
+#
+listen-address  127.0.0.1:8118
+
+#
+#  4.2. toggle
+#  ===========
+#
+#  Specifies:
+#
+#      Initial state of "toggle" status
+#
+#  Type of value:
+#
+#      1 or 0
+#
+#  Default value:
+#
+#      1
+#
+#  Effect if unset:
+#
+#      Act as if toggled on
+#
+#  Notes:
+#
+#      If set to 0, Privoxy will start in "toggled off" mode,
+#      i.e. behave like a normal, content-neutral proxy where all ad
+#      blocking, filtering, etc are disabled. See enable-remote-toggle
+#      below. This is not really useful anymore, since toggling is
+#      much easier via the web interface than via editing the conf file.
+#
+#      The windows version will only display the toggle icon in the
+#      system tray if this option is present.
+#
+toggle  1
+
+#
+#  4.3. enable-remote-toggle
+#  =========================
+#
+#  Specifies:
+#
+#      Whether or not the web-based toggle feature may be used
+#
+#  Type of value:
+#
+#      0 or 1
+#
+#  Default value:
+#
+#      1
+#
+#  Effect if unset:
+#
+#      The web-based toggle feature is disabled.
+#
+#  Notes:
+#
+#      When toggled off, Privoxy acts like a normal, content-neutral
+#      proxy, i.e.  it acts as if none of the actions applied to
+#      any URL.
+#
+#      For the time being, access to the toggle feature can not be
+#      controlled separately by "ACLs" or HTTP authentication, so that
+#      everybody who can access Privoxy (see "ACLs" and listen-address
+#      above) can toggle it for all users. So this option is not
+#      recommended for multi-user environments with untrusted users.
+#
+#      Note that you must have compiled Privoxy with support for this
+#      feature, otherwise this option has no effect.
+#
+enable-remote-toggle 0
+
+#
+#  4.4. enable-edit-actions
+#  ========================
+#
+#  Specifies:
+#
+#      Whether or not the web-based actions file editor may be used
+#
+#  Type of value:
+#
+#      0 or 1
+#
+#  Default value:
+#
+#      1
+#
+#  Effect if unset:
+#
+#      The web-based actions file editor is disabled.
+#
+#  Notes:
+#
+#      For the time being, access to the editor can not be controlled
+#      separately by "ACLs" or HTTP authentication, so that everybody
+#      who can access Privoxy (see "ACLs" and listen-address above)
+#      can modify its configuration for all users. So this option is
+#      not recommended for multi-user environments with untrusted users.
+#
+#      Note that you must have compiled Privoxy with support for this
+#      feature, otherwise this option has no effect.
+#
+enable-edit-actions 0
+
+#
+#  4.5. ACLs: permit-access and deny-access
+#  ========================================
+#
+#  Specifies:
+#
+#      Who can access what.
+#
+#  Type of value:
+#
+#      src_addr[/src_masklen] [dst_addr[/dst_masklen]]
+#
+#      Where src_addr and dst_addr are IP addresses in dotted decimal
+#      notation or valid DNS names, and src_masklen and dst_masklen are
+#      subnet masks in CIDR notation, i.e. integer values from 2 to 30
+#      representing the length (in bits) of the network address. The
+#      masks and the whole destination part are optional.
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      Don't restrict access further than implied by listen-address
+#
+#  Notes:
+#
+#      Access controls are included at the request of ISPs and systems
+#      administrators, and are not usually needed by individual
+#      users. For a typical home user, it will normally suffice to
+#      ensure that Privoxy only listens on the localhost (127.0.0.1)
+#      or internal (home) network address by means of the listen-address
+#      option.
+#
+#      Please see the warnings in the FAQ that this proxy is not
+#      intended to be a substitute for a firewall or to encourage
+#      anyone to defer addressing basic security weaknesses.
+#
+#      Multiple ACL lines are OK. If any ACLs are specified, then
+#      the Privoxy talks only to IP addresses that match at least one
+#      permit-access line and don't match any subsequent deny-access
+#      line. In other words, the last match wins, with the default
+#      being deny-access.
+#
+#      If Privoxy is using a forwarder (see forward below) for a
+#      particular destination URL, the dst_addr that is examined is
+#      the address of the forwarder and NOT the address of the ultimate
+#      target. This is necessary because it may be impossible for the
+#      local Privoxy to determine the IP address of the ultimate target
+#      (that's often what gateways are used for).
+#
+#      You should prefer using IP addresses over DNS names, because
+#      the address lookups take time. All DNS names must resolve! You
+#      can not use domain patterns like "*.org" or partial domain
+#      names. If a DNS name resolves to multiple IP addresses, only
+#      the first one is used.
+#
+#      Denying access to particular sites by ACL may have undesired
+#      side effects if the site in question is hosted on a machine
+#      which also hosts other sites.
+#
+#  Examples:
+#
+#      Explicitly define the default behavior if no ACL and
+#      listen-address are set: "localhost" is OK. The absence of a
+#      dst_addr implies that all destination addresses are OK:
+#
+#        permit-access  localhost
+#
+#      Allow any host on the same class C subnet as www.privoxy.org
+#      access to nothing but www.example.com:
+#
+#        permit-access  www.privoxy.org/24 www.example.com/32
+#
+#      Allow access from any host on the 26-bit subnet 192.168.45.64
+#      to anywhere, with the exception that 192.168.45.73 may not
+#      access www.dirty-stuff.example.com:
+#
+#        permit-access  192.168.45.64/26
+#        deny-access    192.168.45.73     www.dirty-stuff.example.com
+#
+
+#
+#  4.6. buffer-limit
+#  =================
+#
+#  Specifies:
+#
+#      Maximum size of the buffer for content filtering.
+#
+#  Type of value:
+#
+#      Size in Kbytes
+#
+#  Default value:
+#
+#      4096
+#
+#  Effect if unset:
+#
+#      Use a 4MB (4096 KB) limit.
+#
+#  Notes:
+#
+#      For content filtering, i.e. the +filter and +deanimate-gif
+#      actions, it is necessary that Privoxy buffers the entire document
+#      body. This can be potentially dangerous, since a server could
+#      just keep sending data indefinitely and wait for your RAM to
+#      exhaust -- with nasty consequences.  Hence this option.
+#
+#      When a document buffer size reaches the buffer-limit, it is
+#      flushed to the client unfiltered and no further attempt to filter
+#      the rest of the document is made. Remember that there may be
+#      multiple threads running, which might require up to buffer-limit
+#      Kbytes each, unless you have enabled "single-threaded" above.
+#
+buffer-limit 4096
+
+#
+#  5. FORWARDING
+#  =============
+#
+#  This feature allows routing of HTTP requests through a chain
+#  of multiple proxies. It can be used to better protect privacy
+#  and confidentiality when accessing specific domains by routing
+#  requests to those domains through an anonymous public proxy
+#  or to use a caching proxy to speed up browsing. Or chaining to
+#  a parent proxy may be necessary because the machine that Privoxy
+#  runs on has no direct Internet access.
+#
+#  Also specified here are SOCKS proxies. Privoxy supports the SOCKS
+#  4 and SOCKS 4A protocols.
+#
+
+#
+#  5.1. forward
+#  ============
+#
+#  Specifies:
+#
+#      To which parent HTTP proxy specific requests should be routed.
+#
+#  Type of value:
+#
+#      target_pattern http_parent[:port]
+#
+#      where target_pattern is a URL pattern that specifies to which
+#      requests (i.e. URLs) this forward rule shall apply. Use /
+#      to denote "all URLs".  http_parent[:port] is the DNS name or
+#      IP address of the parent HTTP proxy through which the requests
+#      should be forwarded, optionally followed by its listening port
+#      (default: 8080). Use a single dot (.) to denote "no forwarding".
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      Don't use parent HTTP proxies.
+#
+#  Notes:
+#
+#      If http_parent is ".", then requests are not forwarded to
+#      another HTTP proxy but are made directly to the web servers.
+#
+#      Multiple lines are OK, they are checked in sequence, and the
+#      last match wins.
+#
+#  Examples:
+#
+#      Everything goes to an example anonymizing proxy, except SSL on
+#      port 443 (which it doesn't handle):
+#
+#        forward   /      anon-proxy.example.org:8080
+#        forward   :443   .
+#
+#      Everything goes to our example ISP's caching proxy, except for
+#      requests to that ISP's sites:
+#
+#        forward   /                  caching-proxy.example-isp.net:8000
+#        forward   .example-isp.net   .
+#
+
+#
+#  5.2. forward-socks4 and forward-socks4a
+#  =======================================
+#
+#  Specifies:
+#
+#      Through which SOCKS proxy (and to which parent HTTP proxy)
+#      specific requests should be routed.
+#
+#  Type of value:
+#
+#      target_pattern socks_proxy[:port] http_parent[:port]
+#
+#      where target_pattern is a URL pattern that specifies to which
+#      requests (i.e. URLs) this forward rule shall apply. Use / to
+#      denote "all URLs".  http_parent and socks_proxy are IP addresses
+#      in dotted decimal notation or valid DNS names (http_parent may
+#      be "." to denote "no HTTP forwarding"), and the optional port
+#      parameters are TCP ports, i.e. integer values from 1 to 64535
+#
+#  Default value:
+#
+#      Unset
+#
+#  Effect if unset:
+#
+#      Don't use SOCKS proxies.
+#
+#  Notes:
+#
+#      Multiple lines are OK, they are checked in sequence, and the
+#      last match wins.
+#
+#      The difference between forward-socks4 and forward-socks4a
+#      is that in the SOCKS 4A protocol, the DNS resolution of the
+#      target hostname happens on the SOCKS server, while in SOCKS 4
+#      it happens locally.
+#
+#      If http_parent is ".", then requests are not forwarded to another
+#      HTTP proxy but are made (HTTP-wise) directly to the web servers,
+#      albeit through a SOCKS proxy.
+#
+#  Examples:
+#
+#      From the company example.com, direct connections are made to all
+#      "internal" domains, but everything outbound goes through their
+#      ISP's proxy by way of example.com's corporate SOCKS 4A gateway
+#      to the Internet.
+#
+#        forward-socks4a   /              socks-gw.example.com:1080   www-cache.example-isp.net:8080
+#        forward           .example.com   .
+#
+#      A rule that uses a SOCKS 4 gateway for all destinations but no
+#      HTTP parent looks like this:
+#
+#        forward-socks4   /               socks-gw.example.com:1080  .
+#
+
+#
+# UNCOMMENT THE FOLLOWING TO USE TOR OVER PRIVOXY
+#
+#forward-socks4a / localhost:9050 .
+
+
+#
+#  6. WINDOWS GUI OPTIONS
+#  ======================
+#
+#  Privoxy has a number of options specific to the Windows GUI
+#  interface:
+#
+
+#  If "activity-animation" is set to 1, the Privoxy icon will animate
+#  when "Privoxy" is active. To turn off, set to 0.
+#
+#activity-animation   1
+
+#  If "log-messages" is set to 1, Privoxy will log messages to the
+#  console window:
+#
+#log-messages   1
+
+#  If "log-buffer-size" is set to 1, the size of the log buffer,
+#  i.e. the amount of memory used for the log messages displayed in
+#  the console window, will be limited to "log-max-lines" (see below).
+#
+#  Warning: Setting this to 0 will result in the buffer to grow
+#  infinitely and eat up all your memory!
+#
+#log-buffer-size 1
+
+#  log-max-lines is the maximum number of lines held in the log
+#  buffer. See above.
+#
+#log-max-lines 200
+
+#  If "log-highlight-messages" is set to 1, Privoxy will highlight
+#  portions of the log messages with a bold-faced font:
+#
+#log-highlight-messages 1
+
+#  The font used in the console window:
+#
+#log-font-name Comic Sans MS
+
+#  Font size used in the console window:
+#
+#log-font-size 8
+
+#  "show-on-task-bar" controls whether or not Privoxy will appear as
+#  a button on the Task bar when minimized:
+#
+#show-on-task-bar 0
+
+#  If "close-button-minimizes" is set to 1, the Windows close button
+#  will minimize Privoxy instead of closing the program (close with
+#  the exit option on the File menu).
+#
+#close-button-minimizes 1
+
+#  The "hide-console" option is specific to the MS-Win console version
+#  of Privoxy.  If this option is used, Privoxy will disconnect from
+#  and hide the command console.
+#
+#hide-console
+
+#
diff --git a/packages/privoxy/files/privoxy.init b/packages/privoxy/files/privoxy.init
new file mode 100755
index 0000000000..3140c2a30e
--- /dev/null
+++ b/packages/privoxy/files/privoxy.init
@@ -0,0 +1,49 @@
+
+#! /bin/sh
+#
+# This is an init script for Privoxy on Openzaurus
+#
+
+PRIVOXY_PRG="privoxy"
+PRIVOXY_BIN="/usr/sbin/$PRIVOXY_PRG"
+PRIVOXY_CONF="/etc/$PRIVOXY_PRG/config"
+PRIVOXY_USER="privoxy"
+PRIVOXY_PID=/var/run/$PRIVOXY_PRG.pid
+PRIVOXY_LOCK=/var/lock/subsys/$PRIVOXY_PRG
+PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER --pidfile $PRIVOXY_PID $PRIVOXY_CONF"
+
+test -f $PRIVOXY_BIN || exit 0
+test -f $PRIVOXY_CONF || exit 0
+test -d /var/log/privoxy || mkdir /var/log/privoxy && chown privoxy:privoxy /var/log/privoxy
+
+case "$1" in
+  start)
+    echo -n "Starting privoxy daemon"
+
+     if [ -f $PRIVOXY_PID ]; then 
+        killall privoxy && rm -f $PRIVOXY_LOCK $PRIVOXY_PID
+     fi
+
+    start-stop-daemon --start --quiet --exec $PRIVOXY
+    echo "."
+    ;;
+  stop)
+    echo -n "Stopping privoxy daemon"
+    killall $PRIVOXY_PRG
+    echo "."
+    ;;
+  restart)
+    echo -n "Stopping privoxy daemon"
+    killall $PRIVOXY_PRG
+    echo "."
+
+    echo -n "Starting privoxy daemon"
+    start-stop-daemon --start --quiet --exec $PRIVOXY
+    echo "."
+    ;;
+  *)
+    echo "Usage: /etc/init.d/tor {start|stop|restart|start_socats|stop_socats}"
+    exit 1
+esac
+
+exit 0