Merge bk://oe-devel.bkbits.net/openembedded

into bkbits.net:/repos/n/nslu2-linux/openembedded

2005/01/07 19:30:59+01:00 dyndns.org!reenoo
Merge oe-devel@oe-devel.bkbits.net:openembedded
into sugarcube.dyndns.org:/home2/oe/bakery/openembedded

2005/01/07 19:30:19+01:00 dyndns.org!reenoo
vlc-gpe: s/faad/faad2/ in DEPENDS

2005/01/07 18:58:21+01:00 (none)!br1
ppp-dsl: activate replacedefaultroute

2005/01/07 18:55:17+01:00 (none)!br1
ppp: add "replacedefaultroute" (cifdefroute.dif) patch

BKrev: 41ded787DDaUtSAyr6c7FIuwHOenjg

1 files changed, 71 insertions, 0 deletions

diff --git a/packages/ppp-dsl/dsl-provider b/packages/ppp-dsl/dsl-provider
index e69de29bb2..6feaf55752 100644
--- a/packages/ppp-dsl/dsl-provider
+++ b/packages/ppp-dsl/dsl-provider
@@ -0,0 +1,71 @@
+# Configuration file for PPP, using PPP over Ethernet 
+# to connect to a DSL provider.
+#
+# See the manual page pppd(8) for information on all the options.
+
+##
+# Section 1
+#
+# Stuff to configure...
+
+# MUST CHANGE: Uncomment the following line, replacing the user@provider.net
+# by the DSL user name given to your by your DSL provider.
+# (There should be a matching entry in /etc/ppp/pap-secrets with the password.)
+#
+# maybe helpful for germany:
+# T-DSL business  PAP     "t-online-com/111111111111@t-online-com.de"
+# T-DSL t-online  PAP     "[ANSCHLUSSKENNUNG][T_ONLINE_NUMMER]#[MITBENUTZER]@t-online.de"
+# hansenet        CHAP    "net0815@hansenet.de"
+#
+#user ""
+
+# Use the pppoe program to send the ppp packets over the Ethernet link
+# This line should work fine if this computer is the only one accessing
+# the Internet through this DSL connection. This is the right line to use
+# for most people.
+pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1452"
+
+# If the computer connected to the Internet using pppoe is not being used
+# by other computers as a gateway to the Internet, you can try the following
+# line instead, for a small gain in speed:
+#pty "/usr/sbin/pppoe -I eth0 -T 80"
+
+# An even more conservative version of the previous line, if things
+# don't work using -m 1452... 
+#pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1412"
+
+
+# The following two options should work fine for most DSL users.
+
+# Assumes that your IP address is allocated dynamically
+# by your DSL provider...
+noipdefault
+# Comment out if you already have the correct default route installed
+defaultroute
+replacedefaultroute
+usepeerdns
+
+##
+# Section 2
+#
+# Uncomment if your DSL provider charges by minute connected
+# and you want to use demand-dialing. 
+#
+# Disconnect after 300 seconds (5 minutes) of idle time.
+
+#demand
+#idle 300
+
+##
+# Section 3
+#
+# You shouldn't need to change these options...
+
+hide-password
+lcp-echo-interval 20
+lcp-echo-failure 3
+# Override any connect script that may have been set in /etc/ppp/options.
+connect /bin/true
+noauth
+persist
+mtu 1492