openldap: libldap-2.2 new revision 2.2.29

1 files changed, 254 insertions, 0 deletions

diff --git a/packages/openldap/openldap_2.2.29.bb b/packages/openldap/openldap_2.2.29.bb
new file mode 100644
index 0000000000..cbb968f673
--- /dev/null
+++ b/packages/openldap/openldap_2.2.29.bb
@@ -0,0 +1,254 @@
+# OpenLDAP, a license free (see http://www.OpenLDAP.org/license.html)
+#
+DESCRIPTION = "OpenLDAP Software is an open source implementation of the Lightweight Directory Access Protocol."
+HOMEPAGE = "http://www.OpenLDAP.org/license.html"
+MAINTAINER = "John Bowler <jbowler@acm.org>"
+PRIORITY = "optional"
+# The OpenLDAP Public License - see the HOMEPAGE - defines
+# the license.  www.openldap.org claims this is Open Source
+# (see http://www.openldap.org), the license appears to be
+# basically BSD.  opensource.org does not record this license
+# at present (so it is apparently not OSI certified).
+LICENSE = "OpenLDAP"
+SECTION = "libs"
+
+PR = "r0"
+
+SRC_URI = "ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/${P}.tgz"
+SRC_URI += "file://openldap-autoconf.patch;patch=1"
+# The build tries to run a host executable, this fails.  The patch
+# causes the executable and its data to be installed instead of
+# the output - ucgendat must be run after the ipkg install!
+SRC_URI += "file://ucgendat.patch;patch=1"
+# The original top.mk used INSTALL, not INSTALL_STRIP_PROGRAM when
+# installing .so and executables, this fails in cross compilation
+# environments
+SRC_URI += "file://install-strip.patch;patch=1"
+
+inherit autotools
+
+# OPTIONS
+# The following two variables can be set in a distro or local.conf
+# to switch features on.  Each feature foo defines OPENLDAP_OPTION_foo
+# and OPENLDAP_DEPENDS_foo in this file - to include feature foo add
+# the two variables into the setting of the options below (please use
+# += because that means this can be done in *both* distro.conf and
+# local.conf!
+OPENLDAP_OPTIONS ?= ""
+OPENLDAP_DEPENDS ?= ""
+
+# CONFIG DEFINITIONS
+# The following is necessary because it cannot be determined for a
+# cross compile automagically.  Select should yield fine on all OE
+# systems...
+EXTRA_OECONF += "--with-yielding-select=yes"
+# Shared libraries are nice...
+EXTRA_OECONF += "--enable-dynamic"
+#
+# Disable TLS to remove the need for openssl/libcrypto
+OPENLDAP_OPTION_tls  ?= "--without-tls"
+# set the following to " openssl" to build tls support
+OPENLDAP_DEPENDS_tls ?=
+EXTRA_OECONF += "${OPENLDAP_OPTION_tls}"
+DEPENDS += "${OPENLDAP_DEPENDS_tls}"
+
+# SLAPD options
+#
+# UNIX crypt(3) passwd support:
+EXTRA_OECONF += "--enable-crypt"
+#
+# Enable dynamic module loading.  If this is *disabled* the
+# dependency on libtool is removed (to disable set the following
+# to variables to "" in a .conf file).
+OPENLDAP_OPTION_modules += "lt_cv_dlopen_self=yes --enable-modules"
+OPENLDAP_DEPENDS_modules += "libtool"
+EXTRA_OECONF += " ${OPENLDAP_OPTION_modules}"
+DEPENDS += "${OPENLDAP_DEPENDS_modules}"
+
+# SLAPD BACKEND
+#
+# The backend must be set by the configuration.  This controls the
+# required database, the default database, bdb, is turned off but
+# can be turned back on again and it *is* below!  The monitor backend
+# is also disabled.  If you try to change the backends but fail to
+# enable a single one the build will fail in an obvious way.
+#
+EXTRA_OECONF += "--disable-bdb --disable-monitor"
+#
+# Backends="bdb dnssrv hdb ldap ldbm meta monitor null passwd perl shell sql"
+#
+# Note that multiple backends can be built.  The ldbm backend requires a
+# build-time choice of database API.  The bdb backend forces this to be
+# DB4.  To use the gdbm (or other) API the Berkely database module must
+# be removed from the build.
+md = "${libexecdir}/openldap"
+#
+#--enable-bdb          enable Berkeley DB backend no|yes|mod yes
+# The Berkely DB is the standard choice.  This version of OpenLDAP requires
+# the version 4 implementation or better.
+# To disable this set all three of the following variables to <empty> in
+# a .conf file (this will allow ldbm to be build with gdbm).
+OPENLDAP_OPTION_bdb   ?= "--enable-bdb=mod"
+OPENLDAP_DEPENDS_bdb  ?= "db"
+OPENLDAP_PACKAGE_bdb  ?= "${PN}-backend-bdb"
+FILES_${PN}-backend-bdb = "${md}/back_bdb.so ${md}/back_bdb.la ${md}/back_bdb-*.so.*"
+EXTRA_OECONF += "${OPENLDAP_OPTION_bdb}"
+DEPENDS += "${OPENLDAP_DEPENDS_bdb}"
+PACKAGES += "${OPENLDAP_PACKAGE_bdb}"
+#
+#--enable-dnssrv       enable dnssrv backend no|yes|mod no
+# This has no dependencies.
+FILES_${PN}-backend-dnssrv = "${md}/back_dnssrv.so ${md}/back_dnssrv.la ${md}/back_dnssrv-*.so.*"
+EXTRA_OECONF += "--enable-dnssrv=mod"
+PACKAGES += "${PN}-backend-dnssrv"
+#
+#--enable-hdb          enable Hierarchical DB backend no|yes|mod no
+# This forces ldbm to use Berkeley too, remove to use gdbm
+OPENLDAP_OPTION_hdb   ?= "--enable-hdb=mod"
+OPENLDAP_DEPENDS_hdb  ?= "db"
+OPENLDAP_PACKAGE_hdb  ?= "${PN}-backend-hdb"
+FILES_${PN}-backend-hdb = "${md}/back_hdb.so ${md}/back_hdb.la ${md}/back_hdb-*.so.*"
+EXTRA_OECONF += "${OPENLDAP_OPTION_hdb}"
+DEPENDS += ${OPENLDAP_DEPENDS_hdb}
+PACKAGES += "${OPENLDAP_PACKAGE_hdb}"
+#
+#--enable-ldap         enable ldap backend no|yes|mod no
+# This has no dependencies
+EXTRA_OECONF += "--enable-ldap=mod"
+FILES_${PN}-backend-ldap = "${md}/back_ldap.so ${md}/back_ldap.la ${md}/back_ldap-*.so.*"
+PACKAGES += "${PN}-backend-ldap"
+#
+#--enable-ldbm         enable ldbm backend no|yes|mod no
+# ldbm requires further specification of the underlying database API, because
+# bdb is enabled above this must be set to berkeley, however the config
+# defaults this correctly so --with-ldbm-api is *not* set.  The build will
+# fail if bdb is removed (above) but not database is built to provide the
+# support for ldbm (because the 'DEPENDS_ldbm' is empty below.)
+#
+# So to use gdbm set:
+#OPENLDAP_OPTION_ldbm = "--enable-ldbm=mod --with-ldbm-api=gdbm"
+#OPENLDAP_DEPENDS_ldbm = gdbm
+# And clear the bdb and hdb settings.
+OPENLDAP_OPTION_ldbm ?= "--enable-ldbm=mod"
+OPENLDAP_DEPENDS_ldbm ?= ""
+OPENLDAP_PACKAGES_ldbm ?= "${PN}-backend-ldbm"
+FILES_${PN}-backend-ldbm = "${md}/back_ldbm.so ${md}/back_ldbm.la ${md}/back_ldbm-*.so.*"
+EXTRA_OECONF += "${OPENLDAP_OPTION_ldbm}"
+DEPENDS += "${OPENLDAP_DEPENDS_ldbm}"
+PACKAGES += "${PN}-backend-ldbm"
+#
+#--enable-meta         enable metadirectory backend no|yes|mod no
+# No dependencies
+EXTRA_OECONF += "--enable-meta=mod"
+FILES_${PN}-backend-meta = "${md}/back_meta.so ${md}/back_meta.la ${md}/back_meta-*.so.*"
+PACKAGES += "${PN}-backend-meta"
+#
+#--enable-monitor      enable monitor backend no|yes|mod yes
+EXTRA_OECONF += "--enable-monitor=mod"
+FILES_${PN}-backend-monitor = "${md}/back_monitor.so ${md}/back_monitor.la ${md}/back_monitor-*.so.*"
+PACKAGES += "${PN}-backend-monitor"
+#
+#--enable-null         enable null backend no|yes|mod no
+EXTRA_OECONF += "--enable-null=mod"
+FILES_${PN}-backend-null = "${md}/back_null.so ${md}/back_null.la ${md}/back_null-*.so.*"
+PACKAGES += "${PN}-backend-null"
+#
+#--enable-passwd       enable passwd backend no|yes|mod no
+EXTRA_OECONF += " --enable-passwd=mod"
+FILES_${PN}-backend-passwd = "${md}/back_passwd.so ${md}/back_passwd.la ${md}/back_passwd-*.so.*"
+PACKAGES += "${PN}-backend-passwd"
+#
+#--enable-perl         enable perl backend no|yes|mod no
+#  This requires a loadable perl dynamic library, if enabled without
+#  doing something appropriate (building perl?) the build will pick
+#  up the build machine perl - not good.
+OPENLDAP_OPTION_perl ?= "--enable-perl=mod"
+OPENLDAP_DEPENDS_perl ?= "perl"
+OPENLDAP_PACKAGES_perl ?= "${PN}-backend-perl"
+FILES_${PN}-backend-perl = "${md}/back_perl.so ${md}/back_perl.la ${md}/back_perl-*.so.*"
+#EXTRA_OECONF += "${OPENLDAP_OPTION_perl}"
+#DEPENDS += "${OPENLDAP_DEPENDS_perl}"
+#PACKAGES += "${PN}-backend-perl"
+#
+#--enable-shell        enable shell backend no|yes|mod no
+EXTRA_OECONF += "--enable-shell=mod"
+FILES_${PN}-backend-shell = "${md}/back_shell.so ${md}/back_shell.la ${md}/back_shell-*.so.*"
+PACKAGES += "${PN}-backend-shell"
+#
+#--enable-sql          enable sql backend no|yes|mod no
+# sql requires some sql backend which provides sql.h, sqlite* provides
+# sqlite.h (which may be compatible but hasn't been tried.)
+OPENLDAP_OPTION_sql ?= "--enable-sql=mod"
+OPENLDAP_DEPENDS_sql ?= "sql"
+OPENLDAP_PACKAGES_sql ?= "${PN}-backend-sql"
+FILES_${PN}-backend-sql = "${md}/back_sql.so ${md}/back_sql.la ${md}/back_sql-*.so.*"
+#EXTRA_OECONF += "${OPENLDAP_OPTION_sql}"
+#DEPENDS += "${OPENLDAP_DEPENDS_sql}"
+#PACKAGES += "${PN}-backend-sql"
+#
+#--enable-dyngroup     Dynamic Group overlay no|yes|mod no
+#  This is a demo, Proxy Cache defines init_module which conflicts with the
+#  same symbol in dyngroup
+#EXTRA_OECONF += "--enable-dyngroup=mod"
+#FILES_${PN}-overlay-dyngroup = "${md}/back_dyngroup.so ${md}/back_dyngroup.la ${md}/back_dyngroup-*.so.*"
+#PACKAGES += "${PN}-overlay-dyngroup"
+#
+#--enable-proxycache   Proxy Cache overlay no|yes|mod no
+EXTRA_OECONF += "--enable-proxycache=mod"
+FILES_${PN}-overlay-proxycache = "${md}/pcache.so ${md}/pcache.la ${md}/pcache-*.so.*"
+PACKAGES += "${PN}-overlay-proxycache"
+#
+# LOCAL OPTION OVERRIDES
+# The distro/lcoal options must be added in *last*
+EXTRA_OECONF += "${OPENLDAP_OPTIONS}"
+DEPENDS      += "${OPENLDAP_DEPENDS}"
+
+do_stage() {
+	autotools_stage_includes
+	# Install the -2.2 versions, but link foo.so to foo-2.2.so ONLY
+	# if the do not exist!
+	oe_libinstall -so -C libraries/libldap/.libs libldap-2.2 ${STAGING_LIBDIR}
+	test -e ${STAGING_LIBDIR}/libldap.so ||
+		ln -s $(basename ${STAGING_LIBDIR}/libldap-2.2.so.*.*.*) ${STAGING_LIBDIR}/libldap.so
+	oe_libinstall -so -C libraries/libldap_r/.libs libldap_r-2.2 ${STAGING_LIBDIR}
+	test -e ${STAGING_LIBDIR}/libldap_r.so ||
+		ln -s $(basename ${STAGING_LIBDIR}/libldap_r-2.2.so.*.*.*) ${STAGING_LIBDIR}/libldap_r.so
+	oe_libinstall -so -C libraries/liblber/.libs liblber-2.2 ${STAGING_LIBDIR}
+	test -e ${STAGING_LIBDIR}/liblber.so ||
+		ln -s $(basename ${STAGING_LIBDIR}/liblber-2.2.so.*.*.*) ${STAGING_LIBDIR}/liblber.so
+}
+
+LEAD_SONAME = "libldap-2.2.so.*"
+
+# The executables go in a separate package.  This allows the
+# installation of the libraries with no daemon support.
+# Each module also has its own package - see above.
+PACKAGES += "${PN}-slapd ${PN}-slurpd ${PN}-bin"
+
+# Package contents - shift most standard contents to -bin
+FILES_${PN} = "${libdir}/lib*.so.* ${sysconfdir}/openldap/ldap.* ${localstatedir}/openldap-data"
+FILES_${PN}-slapd = "${libexecdir}/slapd ${sbindir} ${datadir}/openldap/ucdata \
+	${localstatedir}/run ${sysconfdir}/openldap/slapd.* ${sysconfdir}/openldap/schema"
+FILES_${PN}-slurpd = "${libexecdir}/slurpd ${localstatedir}/openldap-slurp ${localstatedir}/run"
+FILES_${PN}-bin = "${bindir}"
+FILES_${PN}-dev = "${includedir} ${libdir}/lib*.so ${libdir}/*.la ${libdir}/*.a ${libexecdir}/openldap/*.a"
+
+# Run ucgendat, and remove it.
+# This is a painful and annoying way around the use of machine-generated
+# tables within the build.  The alternative is to rewrite the ucgendat
+# stuff and associated liblunicode code to use machine-independent data
+# files - the current code seems to at least assume byte sex.
+DATFILES = "case.dat cmbcl.dat comp.dat ctype.dat decomp.dat num.dat kdecomp.dat"
+pkg_postinst_openldap-slapd() {
+test -n "${DESTDIR}" -o "${BUILD_ARCH}" = "${HOST_ARCH}" || (
+	cd "${datadir}/${PN}/ucdata" &&
+	./ucgendat UnicodeData.txt -x CompositionExclusions.txt &&
+	# This saves about 1MByte
+	rm ucgendat UnicodeData.txt CompositionExclusions.txt
+)
+}
+pkg_prerm_openldap-slapd() {
+test "${BUILD_ARCH}" = "${HOST_ARCH}" || (
+	cd "${datadir}/${PN}/ucdata" && rm ${DATFILES}
+)
+}