packages/obsolete/nslu2: dropped all obsolete nslu2 kernels

1 files changed, 0 insertions, 461 deletions

diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch
deleted file mode 100644
index 038c71c3b3..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch
+++ /dev/null
@@ -1,461 +0,0 @@
---- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option
- 
- comment "IXP4xx Platforms"
- 
-+# This entry is placed on top because otherwise it would have
-+# been shown as a submenu.
-+config MACH_NSLU2
-+	bool
-+	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+	help
-+	  Say 'Y' here if you want your kernel to support Linksys's
-+	  NSLU2 NAS device. For more information on this platform,
-+	  see http://www.nslu2-linux.org
-+
- config ARCH_AVILA
- 	bool "Avila"
- 	help
---- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
-+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
- 
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-pci.c
-+ *
-+ * NSLU2 board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ *	Copyright (C) 2002 Intel Corporation.
-+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init nslu2_pci_preinit(void)
-+{
-+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
-+
-+	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-+	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-+	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-+
-+	/* INTD is not configured as GPIO is used
-+	 * for the power input button.
-+	 */
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-+		IRQ_NSLU2_PCI_INTA,
-+		IRQ_NSLU2_PCI_INTB,
-+		IRQ_NSLU2_PCI_INTC,
-+	};
-+
-+	int irq = -1;
-+
-+	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-+		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-+			irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
-+	}
-+
-+	return irq;
-+}
-+
-+struct hw_pci __initdata nslu2_pci = {
-+	.nr_controllers = 1,
-+	.preinit	= nslu2_pci_preinit,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= ixp4xx_setup,
-+	.scan		= ixp4xx_scan_bus,
-+	.map_irq	= nslu2_map_irq,
-+};
-+
-+int __init nslu2_pci_init(void) /* monkey see, monkey do */
-+{
-+	if (machine_is_nslu2())
-+		pci_common_init(&nslu2_pci);
-+
-+	return 0;
-+}
-+
-+subsys_initcall(nslu2_pci_init);
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,92 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-power.c
-+ *
-+ * NSLU2 Power/Reset driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* Signal init to do the ctrlaltdel action, this will bypass init if
-+	 * it hasn't started and do a kernel_restart.
-+	 */
-+	ctrl_alt_del();
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* This is the paper-clip reset, it shuts the machine down directly.
-+	 */
-+	machine_power_off();
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_power_init(void)
-+{
-+	if (!(machine_is_nslu2()))
-+		return 0;
-+
-+	*IXP4XX_GPIO_GPISR = 0x20400000;	/* read the 2 irqs to clr */
-+
-+	set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-+	set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-+
-+	gpio_line_isr_clear(NSLU2_RB_GPIO);
-+	gpio_line_isr_clear(NSLU2_PB_GPIO);
-+
-+	if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-+		SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
-+
-+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+			NSLU2_RB_IRQ);
-+
-+		return -EIO;
-+	}
-+
-+	if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-+		SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
-+
-+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+			NSLU2_PB_IRQ);
-+
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit nslu2_power_exit(void)
-+{
-+	free_irq(NSLU2_RB_IRQ, NULL);
-+	free_irq(NSLU2_PB_IRQ, NULL);
-+}
-+
-+module_init(nslu2_power_init);
-+module_exit(nslu2_power_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-setup.c
-+ *
-+ * NSLU2 board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Mark Rakes <mrakes at mac.com>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
-+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data nslu2_flash_data = {
-+	.map_name		= "cfi_probe",
-+	.width			= 2,
-+};
-+
-+static struct resource nslu2_flash_resource = {
-+	.start			= NSLU2_FLASH_BASE,
-+	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-+	.flags			= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device nslu2_flash = {
-+	.name			= "IXP4XX-Flash",
-+	.id			= 0,
-+	.dev.platform_data	= &nslu2_flash_data,
-+	.num_resources		= 1,
-+	.resource		= &nslu2_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+	.sda_pin		= NSLU2_SDA_PIN,
-+	.scl_pin		= NSLU2_SCL_PIN,
-+};
-+
-+static struct platform_device nslu2_i2c_controller = {
-+	.name			= "IXP4XX-I2C",
-+	.id			= 0,
-+	.dev.platform_data	= &nslu2_i2c_gpio_pins,
-+	.num_resources		= 0,
-+};
-+
-+static struct resource nslu2_uart_resources[] = {
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct plat_serial8250_port nslu2_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ }
-+};
-+
-+static struct platform_device nslu2_uart = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data	= nslu2_uart_data,
-+	.num_resources		= 2,
-+	.resource		= nslu2_uart_resources,
-+};
-+
-+static struct platform_device *nslu2_devices[] __initdata = {
-+	&nslu2_i2c_controller,
-+	&nslu2_flash,
-+	&nslu2_uart,
-+};
-+
-+static void nslu2_power_off(void)
-+{
-+	/* This causes the box to drop the power and go dead. */
-+
-+	/* enable the pwr cntl gpio */
-+	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+	/* do the deed */
-+	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init nslu2_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	pm_power_off = nslu2_power_off;
-+
-+	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+}
-+
-+MACHINE_START(NSLU2, "Linksys NSLU2")
-+	/* Maintainer: www.nslu2-linux.org */
-+	.phys_ram	= PHYS_OFFSET,
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.timer          = &ixp4xx_timer,
-+	.init_machine	= nslu2_init,
-+MACHINE_END
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h	1970-01-01 00:00:00.000000000 +0000
-@@ -44,5 +44,6 @@ extern unsigned int processor_id;
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
- 
- #endif  /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h	1970-01-01 00:00:00.000000000 +0000
-@@ -93,4 +93,11 @@
- #define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
- #define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
- 
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-+
- #endif
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nslu2.h
-+ *
-+ * NSLU2 platform specific definitions
-+ *
-+ * Author: Mark Rakes <mrakes AT mac.com>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * based on ixdp425.h:
-+ *	Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under  the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NSLU2_SDA_PIN		7
-+#define NSLU2_SCL_PIN		6
-+
-+/*
-+ * NSLU2 PCI IRQs
-+ */
-+#define NSLU2_PCI_MAX_DEV	3
-+#define NSLU2_PCI_IRQ_LINES	3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NSLU2_PCI_INTA_PIN	11
-+#define NSLU2_PCI_INTB_PIN	10
-+#define NSLU2_PCI_INTC_PIN	9
-+#define NSLU2_PCI_INTD_PIN	8
-+
-+
-+/* NSLU2 Timer */
-+#define NSLU2_FREQ 66000000
-+#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+
-+/* GPIO */
-+
-+#define NSLU2_GPIO0		0
-+#define NSLU2_GPIO1		1
-+#define NSLU2_GPIO2		2
-+#define NSLU2_GPIO3		3
-+#define NSLU2_GPIO4		4
-+#define NSLU2_GPIO5		5
-+#define NSLU2_GPIO6		6
-+#define NSLU2_GPIO7		7
-+#define NSLU2_GPIO8		8
-+#define NSLU2_GPIO9		9
-+#define NSLU2_GPIO10		10
-+#define NSLU2_GPIO11		11
-+#define NSLU2_GPIO12		12
-+#define NSLU2_GPIO13		13
-+#define NSLU2_GPIO14		14
-+#define NSLU2_GPIO15		15
-+
-+/* Buttons */
-+
-+#define NSLU2_PB_GPIO		NSLU2_GPIO5
-+#define NSLU2_PO_GPIO		NSLU2_GPIO8	/* power off */
-+#define NSLU2_RB_GPIO		NSLU2_GPIO12
-+
-+#define NSLU2_PB_IRQ		IRQ_IXP4XX_GPIO5
-+#define NSLU2_RB_IRQ		IRQ_IXP4XX_GPIO12
-+
-+#define NSLU2_PB_BM		(1L << NSLU2_PB_GPIO)
-+#define NSLU2_PO_BM		(1L << NSLU2_PO_GPIO)
-+#define NSLU2_RB_BM		(1L << NSLU2_RB_GPIO)
-+
-+/* Buzzer */
-+
-+#define NSLU2_GPIO_BUZZ		4
-+#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
-+/* LEDs */
-+
-+#define NSLU2_LED_RED		NSLU2_GPIO0
-+#define NSLU2_LED_GRN		NSLU2_GPIO1
-+
-+#define NSLU2_LED_RED_BM	(1L << NSLU2_LED_RED)
-+#define NSLU2_LED_GRN_BM	(1L << NSLU2_LED_GRN)
-+
-+#define NSLU2_LED_DISK1		NSLU2_GPIO2
-+#define NSLU2_LED_DISK2		NSLU2_GPIO3
-+
-+#define NSLU2_LED_DISK1_BM	(1L << NSLU2_GPIO2)
-+#define NSLU2_LED_DISK2_BM	(1L << NSLU2_GPIO3)
-+
-+