rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

2 files changed, 0 insertions, 1278 deletions

diff --git a/packages/mii-diag/mii-diag-2.11/libmii.c b/packages/mii-diag/mii-diag-2.11/libmii.c
deleted file mode 100644
index 96f0060509..0000000000
--- a/packages/mii-diag/mii-diag-2.11/libmii.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/* libmii.c: MII diagnostic and setup library.
-
-	Copyright 1997-2003 by Donald Becker.
-	This version released under the Gnu General Public License,
-	incorporated herein by reference.
-	This source code may be distributed without modification using the
-	existing notice.  Any modification to this source code must include a
-	full notice as described in the GPL
-	Contact the author for use under other terms.
-
-	The author may be reached as becker@scyld.com, or C/O
-	 Scyld Computing Corporation
-	 914 Bay Ridge Road, Suite 220
-	 Annapolis MD 21403
-
-   References
-	http://www.scyld.com/expert/NWay.html
-	http://www.national.com/pf/DP/DP83840A.html
-*/
-
-static const char version_msg[] =
-"libmii.c:v2.11 2/28/2005  Donald Becker (becker@scyld.com)\n"
-" http://www.scyld.com/diag/index.html\n";
-
-/* This library exports the following functions:
-    IOADDR: A token passed to the mdio_read() function.
-    PHY_ID: The MII transceiver address, passed uninterpreted to mdio_read().
-*/
-void show_mii_details(long ioaddr, int phy_id);
-int monitor_mii(long ioaddr, int phy_id);
-
-/* This library expects to be able to call the following functions: */
-extern int mdio_read(long ioaddr, int phy_id, int mii_reg_num);
-
-#include <unistd.h>
-#include <stdio.h>
-#include <time.h>
-#include <sys/time.h>
-
-#include <sys/types.h>
-typedef u_int32_t u32;
-typedef u_int16_t u16;
-typedef u_int8_t u8;
-
-static const char *media_names[] = {
-	"10baseT", "10baseT-FD", "100baseTx", "100baseTx-FD", "100baseT4",
-	"Flow-control", 0,
-};
-
-static void ns83843(long ioaddr, int phy_id);
-static void qs6612(long ioaddr, int phy_id);
-static void smsc83c180(long ioaddr, int phy_id);
-static void tdk78q2120(long ioaddr, int phy_id);
-static void davicom_dm9101(long ioaddr, int phy_id);
-static void intel_i553(long ioaddr, int phy_id);
-static void enablesemi(long ioaddr, int phy_id);
-static void amd_pna(long ioaddr, int phy_id);
-static void amd_tx(long ioaddr, int phy_id);
-static void admtek(long ioaddr, int phy_id);
-static void lu3x31(long ioaddr, int phy_id);
-static void myson981(long ioaddr, int phy_id);
-static void via_tahoe(long ioaddr, int phy_id);
-static void via_vt6103(long ioaddr, int phy_id);
-static void via_vt6105(long ioaddr, int phy_id);
-static void intel(long ioaddr, int phy_id);
-
-struct mii_partnum {
-	const char *vendor;				/* Vendor name. */
-	u16	 phy_id0;				/* Vendor ID (alternate ver. of ieee_oui[]) */
-	u16	 phy_id1;				/* Vendor ID (alternate ver. of ieee_oui[]) */
-	unsigned char ieee_oui[3];	/* IEEE-assigned organizationally unique ID */
-	char flags;
-	void (*(func))(long xcvr_if, int phy_id);/* Function to emit more info. */
-} static oui_map[] = {
-	{"Unknown transceiver type", 0x0000, 0x0000, {0,}, 0, NULL,},
-	{"National Semiconductor 83840A", 0x2000, 0x5c01, {0,}, 0, NULL,},
-	{"National Semiconductor 83843",  0x2000, 0x5c10, {0,}, 0, ns83843, },
-	{"Level One LXT970", 0x7810, 0x0000, {0,}, 0, NULL, },
-	{"Level One LXT971", 0x7810, 0x0001, {0,}, 0, NULL, },
-	{"Level One LXT971A",0x7810, 0x0003, {0,}, 0, NULL, },
-	{"Level One (unknown type)", 0, 0, {0x1e,0x04,0x00}, 0, NULL, },
-	{"Davicom DM9101", 0x0181, 0xB800, {0,}, 0, davicom_dm9101, },
-	{"Davicom (unknown type)", 0, 0, {0x00, 0x60, 0x6e}, 0, davicom_dm9101, },
-	{"Quality Semiconductor QS6612", 0x0181, 0x4410, {0,}, 0, qs6612},
-	{"Quality Semiconductor (unknown type)", 0,0, {0x00, 0x60, 0x51}, 0, NULL},
-	{"SMSC 83c180", 0x0282, 0x1C51, {0}, 0, smsc83c180, },
-	{"TDK Semi 78Q2120 rev. 2", 0x0300, 0xE542, {0,}, 0, tdk78q2120, },
-	{"TDK Semi 78Q2120 rev. 3", 0x0300, 0xE543, {0,}, 0, tdk78q2120, },
-	{"TDK Semi 78Q2120 rev. 11", 0x0300, 0xE54B, {0,}, 0, tdk78q2120, },
-	{"TDK transceiver (unknown type)", 0,0, {0x00, 0xc0, 0x39}, 0, tdk78q2120},
-	{"Intel (unknown type)", 0,0, {0x00, 0xf8, 0x00}, 0, intel_i553},
-	{"Enable Semiconductor EL40-331", 0x0043, 0x7411, {0,}, 0, enablesemi},
-	{"AMD 79c901A.1 HomePNA", 0x0000, 0x6B91, {0,}, 0, amd_pna},
-	{"AMD 79c901A.2 HomePNA", 0x0000, 0x6B92, {0,}, 0, amd_pna},
-	{"AMD 79c901A.3 HomePNA", 0x0000, 0x6B93, {0,}, 0, amd_pna},
-	{"AMD 79c901A.3 10baseT", 0x0000, 0x6B71, {0,}, 0, amd_tx},
-	{"AdHoc Technology AH101LF", 0x0022, 0x561B, {0,}, 0, tdk78q2120},
-	{"Altimata Communications AC101LF", 0x0022, 0x5523, {0,}, 0, tdk78q2120},
-	{"Altimata Comm (unknown type)", 0, 0, {0x00,0x10,0xA9}, 0, tdk78q2120},
-	{"ASIX (unknown type)", 0, 0, {0x00,0xC0,0xB4}, 0, tdk78q2120},
-	{"ADMtek AN983 Comet", 0x0022, 0x5410, {0,}, 0, admtek},
-	{"ADMtek AN985 Comet", 0x0022, 0x5513, {0,}, 0, admtek},
-	{"ADMtek (unknown type)", 0, 0, {0x00,0xe0,0x92}, 0, admtek},
-	{"Lucent LU6612", 0x0180, 0x7641, {0,}, 0, qs6612},
-	{"Lucent LU3X31", 0x0043, 0x7411, {0,}, 0, lu3x31},
-	{"LSI Logic (Seeq) 80225", 0, 0, {0x00,0xA0,0x7D}, 0, NULL},
-	{"Myson MTD981", 0x0302, 0xD000, {0,}, 0, myson981},
-	{"Myson (unknown type)", 0, 0, {0x00,0xC0,0xB4,}, 0, myson981},
-	{"Alta/Kendin Sundance", 0x0022, 0x1720, {0,}, 0, NULL},
-	{"Alta/Kendin Sundance", 0, 0, {0x00,0x08,0x85}, 0, NULL},
-	{"VIA Tahoe VT6103", 0x0101, 0x8f20, {0,}, 0, via_vt6103},
-	{"VIA Tahoe VT6104", 0x0101, 0x8f30, {0,}, 0, via_tahoe},
-	{"VIA Rhine VT6105", 0x0101, 0x8f22, {0,}, 0, via_vt6105},
-	{"Intel 82557 series", 0x02a8, 0x0150, {0,}, 0, intel},
-	{"Intel 82555 rev 1", 0x02a8, 0x0151, {0,}, 0, intel},
-	{"Intel 82559 transceiver", 0x02a8, 0x0154, {0,}, 0, intel},
-	{"Intel 82555 series transceiver", 0,0, {0x00,0xaa,0x00}, 0, intel},
-	{0, },
-};
-
-static u16 mii_val[32];
-
-void show_mii_details(long ioaddr, int phy_id)
-{
-	int mii_reg, i, vendor = 0;
-	u16 bmcr, bmsr, new_bmsr;
-
-	/* This may not be omitted from the output. */
-	printf("%s", version_msg);
-	printf(" MII PHY #%d transceiver registers:", phy_id);
-	for (mii_reg = 0; mii_reg < 32; mii_reg++) {
-		mii_val[mii_reg] = mdio_read(ioaddr, phy_id, mii_reg);
-		printf("%s %4.4x", (mii_reg % 8) == 0 ? "\n  " : "",
-			   mii_val[mii_reg]);
-	}
-	printf(".\n");
-	if (mii_val[0] == 0xffff) {
-		printf("  No MII transceiver present!.\n");
-		return;
-	}
-	bmcr = mii_val[0];
-	bmsr = mii_val[1];
-	printf(" Basic mode control register 0x%4.4x:", bmcr);
-	if (bmcr & 0x1000)
-		printf(" Auto-negotiation enabled.\n");
-	else
-		printf(" Auto-negotiation disabled!\n"
-			   "   Speed fixed at 10%s mbps, %s-duplex.\n",
-			   bmcr & 0x2000 ? "0" : "",
-			   bmcr & 0x0100 ? "full":"half");
-	if (bmcr & 0x8000)
-		printf("  Transceiver currently being reset!\n");
-	if (bmcr & 0x4000)
-		printf("  Transceiver in loopback mode!\n");
-	if (bmcr & 0x0800)
-		printf("  Transceiver powered down!\n");
-	if (bmcr & 0x0400)
-		printf("  Transceiver isolated from the MII!\n");
-	if (bmcr & 0x0200)
-		printf("  Restarted auto-negotiation in progress!\n");
-	if (bmcr & 0x0080)
-		printf("  Internal Collision-Test enabled!\n");
-	
-	new_bmsr = mdio_read(ioaddr, phy_id, 1);
-	printf(" Basic mode status register 0x%4.4x ... %4.4x.\n"
-		   "   Link status: %sestablished.\n"
-		   "   Capable of ",
-		   bmsr, new_bmsr,
-		   bmsr & 0x0004 ? "" :
-		    (new_bmsr & 0x0004) ? "previously broken, but now re" : "not ");
-	if (bmsr & 0xF800) {
-		for (i = 15; i >= 11; i--)
-			if (bmsr & (1<<i))
-				printf(" %s", media_names[i-11]);
-	} else
-		printf("<Warning! No media capabilities>");
-
-	printf(".\n"
-		   "   %s to perform Auto-negotiation, negotiation %scomplete.\n",
-		   bmsr & 0x0008 ? "Able" : "Unable",
-		   bmsr & 0x0020 ? "" : "not ");
-
-	if (bmsr & 0x0010)
-		printf(" Remote fault detected!\n");
-	if (bmsr & 0x0002)
-		printf("   *** Link Jabber! ***\n");
-
-	if (mii_val[2] ^ mii_val[3]) { 		/* Eliminate 0x0000 and 0xffff IDs. */
-		unsigned char oui_0 = mii_val[2] >> 10;
-		unsigned char oui_1 = mii_val[2] >> 2;
-		unsigned char oui_2 = (mii_val[2] << 6) | (mii_val[3] >> 10);
-
-		printf(" Vendor ID is %2.2x:%2.2x:%2.2x:--:--:--, model %d rev. %d.\n",
-			   oui_0, oui_1, oui_2,
-			   ((mii_val[3] >> 4) & 0x3f), mii_val[3] & 0x0f);
-		for ( i = 0; oui_map[i].vendor; i++)
-			/* We match either the Phy ID or the IEEE OUI. */
-			if ((oui_map[i].phy_id0 == mii_val[2] &&
-				 oui_map[i].phy_id1 == mii_val[3]) ||
-				(oui_map[i].ieee_oui[0] == oui_0 &&
-				 oui_map[i].ieee_oui[1] == oui_1 &&
-				 oui_map[i].ieee_oui[2] == oui_2)) {
-				printf("   Vendor/Part: %s.\n", oui_map[i].vendor);
-				vendor = i;
-				break;
-			}
-		if (oui_map[i].vendor == NULL)
-			printf("   No specific information is known about this transceiver"
-				   " type.\n");
-	} else
-		printf(" This transceiver has no vendor identification.\n");
-
-	{
-		int nway_advert = mii_val[4];
-		int lkpar = mii_val[5];
-		printf(" I'm advertising %4.4x:", nway_advert);
-		for (i = 10; i >= 5; i--)
-			if (nway_advert & (1<<i))
-				printf(" %s", media_names[i-5]);
-		printf("\n   Advertising %sadditional info pages.\n",
-			   nway_advert & 0x8000 ? "" : "no ");
-		if ((nway_advert & 31) == 1)
-			printf("   IEEE 802.3 CSMA/CD protocol.\n");
-		else
-			printf("   Using an unknown (non 802.3) encapsulation.\n");
-		printf(" Link partner capability is %4.4x:",
-			   lkpar);
-		for (i = 10; i >= 5; i--)
-			if (lkpar & (1<<i))
-				printf(" %s", media_names[i-5]);
-		printf(".\n   Negotiation %s.\n",
-			   lkpar & 0x4000 ? " completed" : "did not complete");
-	}
-	if (oui_map[vendor].func)
-		oui_map[vendor].func(ioaddr, phy_id);
-
-}
-
-int monitor_mii(long ioaddr, int phy_id)
-{
-	int i, last_event = 0;
-	unsigned short new_1, baseline_1 = mdio_read(ioaddr, phy_id, 1);
-	struct timeval tv, sleepval;
-	time_t cur_time;
-	char timebuf[12];
-
-	if (baseline_1 == 0xffff) {
-		fprintf(stderr, "No MII transceiver present to monitor.\n");
-		return -1;
-	}
-
-	gettimeofday(&tv, NULL);
-	cur_time = tv.tv_sec;
-	strftime(timebuf, sizeof(timebuf), "%H:%M:%S", localtime(&cur_time));
-
-	printf("Monitoring the MII transceiver status.\n"
-		   "%s.%03d  Baseline value of MII BMSR (basic mode status register)"
-		   " is %4.4x.\n", timebuf, (int)tv.tv_usec/1000, baseline_1);
-	while (1) {
-		new_1 = mdio_read(ioaddr, phy_id, 1);
-		if (new_1 == 0xffff) {
-			fprintf(stderr, "The MII transceiver is no longer accessable!\n");
-			return -1;
-		}
-		if (new_1 != baseline_1) {
-			gettimeofday(&tv, NULL);
-			cur_time = tv.tv_sec;
-			strftime(timebuf, sizeof(timebuf), "%H:%M:%S",
-					 localtime(&cur_time));
-			printf("%s.%03d  MII BMSR now %4.4x: %4s link, NWay %s, "
-				   "%3sJabber%s (%4.4x).\n",
-				   timebuf, (int)tv.tv_usec/1000, new_1,
-				   new_1 & 0x04 ? "Good" : "no",
-				   new_1 & 0x20 ? "done" : "busy",
-				   new_1 & 0x02 ? "" : "No ",
-				   new_1 & 0x10 ? ", remote fault" : "",
-				   mdio_read(ioaddr, phy_id, 5)
-				   );
-			if (!(baseline_1 & 0x20)  && (new_1 & 0x20)) {
-				int lkpar = mdio_read(ioaddr, phy_id, 5);
-				printf("   New link partner capability is %4.4x %4.4x:",
-					   lkpar, mdio_read(ioaddr, phy_id, 6));
-				switch (lkpar) {
-				case 0x45e1: printf(" 10/100 switch w/ flow control"); break;
-				case 0x41e1: printf(" 10/100 HD+FD switch"); break;
-				case 0x40a1: printf(" 10/100 bridged repeater"); break;
-				case 0x4081: printf(" 100baseTx repeater w/autonegotation");
-					break;
-				case 0x0081: printf(" 100baseTx (no autonegotation)"); break;
-				case 0x4021: printf(" 10baseT repeater w/autonegotation");
-					break;
-				case 0x0021: printf(" 10baseT (no autonegotation)"); break;
-				default:
-					for (i = 9; i >= 5; i--)
-						if (lkpar & (1<<i))
-							printf(" %s", media_names[i-5]);
-				}
-				printf(".\n");
-			}
-			fflush(stdout);
-			baseline_1 = new_1;
-			last_event = 0;
-		}
-		sleepval.tv_sec = 0;
-		sleepval.tv_usec = last_event++ > 30 ? 200000 : 1000;
-		select(0, 0, 0, 0, &sleepval);			/* Or just sleep(1); */
-	}
-	printf("  Value of MII BMSR (basic mode status register) is %4.4x.\n",
-		   mdio_read(ioaddr, phy_id, 1));
-	return 0;
-}
-
-/* Emit transceiver-specific info. */
-
-struct msg_tbl { int bitmask;  char *msg; };
-
-static void msg_if_set(const int val, const struct msg_tbl msg_tbl[])
-{
-	int i;
-	for (i = 0; msg_tbl[i].bitmask; i++)
-		if (msg_tbl[i].bitmask & val)
-			printf(" %s\n", msg_tbl[i].msg);
-}
-
-static void msg_if_set_fmt(const int val, const struct msg_tbl msg_tbl[],
-						   const char *fmt)
-{
-	int i;
-	for (i = 0; msg_tbl[i].bitmask; i++)
-		if (msg_tbl[i].bitmask & val)
-			printf(fmt, msg_tbl[i].msg);
-}
-
-static void qs6612(long ioaddr, int phy_id)
-{
-	printf("  QS6612 extra registers: Mode %4.4x.\n"
-		   "    Interrupt source %4.4x, mask %4.4x.\n"
-		   "    PHY control %4.4x.\n",
-		   mii_val[17], mii_val[29], mii_val[30], mii_val[31]);
-	return;
-}
-
-static void ns83843(long ioaddr, int phy_id)
-{
-	printf("  NatSemi 83843 extra registers:\n"
-		   "    PHY status %4.4x\n"
-		   "    %s link, %d Mb/sec %s duplex\n"
-		   "    MII interrupts %sabled, %s pending.\n"
-		   "    Events since last read\n"
-		   "     Link disconnects %d\n"
-		   "     False carriers %d\n"
-		   "     Receive errors %d\n"
-		   "    Link beat is currently %sstable\n",
-		   mii_val[0x10],
-		   mii_val[10] & 0x0001 ? "Valid" : "Invalid",
-		   mii_val[10] & 0x0002 ? 10 : 100, 
-		   mii_val[10] & 0x0004 ? "full" : "half", 
-		   mii_val[0x11] & 0x0002 ? "en":"dis",
-		   mii_val[0x10] & 0x0100 ? "interrupt": "none",
-		   mii_val[0x13], mii_val[0x14], mii_val[0x15],
-		   mii_val[0x16] & 0x0010 ? "UN" : "");
-	return;
-}
-static void smsc83c180(long ioaddr, int phy_id)
-{
-	int mii_reg25 = mii_val[25];
-	printf("  SMSC 83c180 extra registers:\n"
-		   "    Auto-negotiation status 0x%4.4x.\n"
-		   "      10baseT polarity is %s.\n"
-		   "      PHY address is %d.\n"
-		   "      Auto-negotiation %scomplete, 1%s0Mbps %s duplex.\n"
-		   "    Rx symbol errors since last read %d.\n",
-		   mii_reg25,
-		   mii_reg25 & 0x2000 ? "normal" : "reversed",
-		   (mii_reg25>>8) & 0x1F,
-		   mii_reg25 & 0x0080 ? "did not " : "",
-		   mii_reg25 & 0x0020 ? "0" : "",
-		   mii_reg25 & 0x0040 ? "full" : "half",
-		   mdio_read(ioaddr, phy_id, 26));
-	return;
-}
-
-static const char *tdk_events[8] = {
-	"Jabber", "Rx error", "Negotiation page received", "Link detection fault",
-	"Link partner acknowledge", "Link status change", "Remote partner fault",
-	"Auto-Negotiation complete"};
-
-static const struct msg_tbl tdk_reg16[] = {
-	{0x8000, " Transceiver is in repeater mode!"},
-	{0x4000, " Interrupt pin set to active high."},
-	{0x2000, " Reserved bit 12 is unexpectedly set."},
-	{0x1000, " Transmit pins are internally disconnected."},
-	{0x0800, " 10baseT signal quality test is disabled."},
-	{0x0400, " 10baseT loopback mode."},
-	{0, 0},
-};
-
-static void tdk78q2120(long ioaddr, int phy_id)
-{
-	int mii_reg16 = mii_val[16];
-	int mii_reg17 = mii_val[17];
-	int mii_reg18 = mii_val[18];
-	int i;
-	printf("  TDK format vendor-specific registers 16..18 are "
-		   "0x%4.4x 0x%4.4x 0x%4.4x\n", mii_reg16, mii_reg17, mii_reg18);
-	printf("      Link polarity is %s %s.\n"
-		   "%s%s"
-		   "      Auto-negotiation %s, 1%s0Mbps %s duplex.\n"
-		   "      Rx link in %s state, PLL %s.\n",
-		   mii_reg16 & 0x0020 ? "OVERRIDDEN to" : "detected as",
-		   mii_reg16 & 0x0010 ? "reversed" : "normal",
-		   mii_reg16 & 0x0002 ?
-		   "     100baseTx Coding and scrambling is disabled!\n":"",
-		   mii_reg16 & 0x0001 ? "     Rx_CLK power-save mode is enabled!\n":"",
-		   mii_reg18 & 0x1000 ? "had no common media" : "complete",
-		   mii_reg18 & 0x0400 ? "0" : "",
-		   mii_reg18 & 0x0800 ? "full" : "half",
-		   mii_reg18 & 0x0200 ? "pass" : "fail",
-		   mii_reg18 & 0x0100 ? "slipped since last read" : "locked");
-
-	msg_if_set(mii_reg16, tdk_reg16);
-	if (mii_reg17 & 0x00ff) {
-		printf("      Events since last read:");
-		for (i = 0; i < 8; i++)
-			if (mii_reg17 & (1 << i))
-				printf("  %s", tdk_events[i]);
-	} else
-		printf("      No new link status events.");
-
-	if (mii_reg17 & 0xff00) {
-		printf("\n      Events that will raise an interrupt:");
-		for (i = 0; i < 8; i++)
-			if (mii_reg17 & (0x100 << i))
-				printf("  %s", tdk_events[i]);
-	}
-	printf("\n");
-	return;
-}
-
-static void davicom_dm9101(long ioaddr, int phy_id)
-{
-	printf("  Davicom vendor specific registers: 0x%4.4x 0x%4.4x 0x%4.4x.\n",
-		   mii_val[16], mii_val[17], mii_val[18]);
-}
-static void intel_i553(long ioaddr, int phy_id)
-{
-	printf("  This transceiver is 100baseT4 only!  Register 16 is %4.4x.\n",
-		   mii_val[16]);
-}
-/* http://www.enablesemi.com/cgi-bin/byteserve/Products/Docs/3VCardBus.pdf */
-static void enablesemi(long ioaddr, int phy_id)
-{
-	printf("  Isolated %d times, %d false carrier events, %d Rx errors.\n",
-		   mii_val[18], mii_val[19], mii_val[21]);
-	printf("  Cable polarity is %s, 100Mb PLL is %slocked.\n",
-		   mii_val[28]&0x8000 ? "reversed" : "normal",
-		   mii_val[27]&0x2000 ? "" : "un");
-}
-/* The amd79c901 contains both PNA and 10/100 management registers.
-   http://www.amd.com/products/npd/techdocs/22304.pdf
-*/
-static void amd_pna(long ioaddr, int phy_id)
-{
-	printf("  HomePNA transceiver in %s speed, %s power mode.\n",
-		   mii_val[16] & 4 ? "high" : "low",
-		   mii_val[16] & 2 ? "high" : "low");
-	printf("  HomePNA noise level %d, peak power %d..\n",
-		   mii_val[25] >> 8, mii_val[25] & 0xff);
-}
-static void amd_tx(long ioaddr, int phy_id)
-{
-	int mii_reg25 = mii_val[25];
-	printf("  AMD vendor specific registers: 0x%4.4x 0x%4.4x 0x%4.4x.\n",
-		   mii_val[16], mii_val[17], mii_val[18]);
-	printf("  The link is %s in 10%s %s duplex mode, autonegotiation state "
-		   "has%s changed.\n",
-		   mii_reg25 & 8 ? "up" : "down",
-		   mii_reg25 & 1 ? "0baseTx" : "baseT",
-		   mii_reg25 & 4 ? "full" : "half",
-		   mii_reg25 & 2 ? "" : " not");
-}
-
-static const struct msg_tbl admtek_reg21[] = {
-	{0x4000, " Link test diabled: Ignoring lack of 10baseT link beat."},
-	{0x2000, " Link forced up."},
-	{0x1000, " Tx jabber check disabled."},
-	{0x0080, " Transmitting 'Far End Fault'!"},
-	{0x0040, " Rx error count full."},
-	{0x0008, " Remote loop back enabled."},
-	{0, 0},
-};
-
-static void admtek(long ioaddr, int phy_id)
-{
-
-	printf("  ADMtek vendor specific registers information:\n"
-		   "   Cable length is approximately %d meters.\n"
-		   "   The receiver has lost lock %d times since last check and "
-		   "had %d error events.\n",
-		   ((mii_val[20] & 0x00f0) >> 4)*10,
-		   mii_val[23], mii_val[23]);
-	msg_if_set(mii_val[21], admtek_reg21);
-	tdk78q2120(ioaddr, phy_id);
-}
-
-static void lu3x31(long ioaddr, int phy_id)
-{
-	printf("  Lucent vendor specific registers 17: 0x%4.4x"
-		   " 29: 0x%4.4x 30: 0x%4.4x 31: 0x%4.4x.\n",
-		   mii_val[17], mii_val[29], mii_val[30], mii_val[31]);
-}
-
-static const struct msg_tbl myson_reg16[] = {
-	{0x0080, " Far end fault enabled."},
-	{0x0040, " Transformer ratio 1.25:1."},
-	{0x0020, " Polarity correction diabled."},
-	{0x0010, " Link is forced up regardless of link beat."},
-	{0x0004, " Bypass Jabber check."},
-	{0x0001, " 100baseFx mode selected."},
-	{0, 0},
-};
-
-static void myson981(long ioaddr, int phy_id)
-{
-	int i, mii_reg17 = mii_val[17];
-
-	printf("  Myson mtd981 extra registers: %4.4x %4.4x %4.4x %4.4x.\n",
-		   mii_val[16], mii_val[17], mii_val[18], mii_val[19]);
-	msg_if_set(mii_val[16] & 0xC800, tdk_reg16);
-	msg_if_set(mii_val[16], myson_reg16);
-
-	if (mii_reg17 & 0x00ff) {
-		printf("      Events since last read:");
-		for (i = 0; i < 8; i++)
-			if (mii_reg17 & (1 << i))
-				printf("  %s", tdk_events[i]);
-	} else
-		printf("      No new link status events.");
-	if (mii_reg17 & 0xff00) {
-		printf("\n      Events that will raise an interrupt:");
-		for (i = 0; i < 8; i++)
-			if (mii_reg17 & (0x100 << i))
-				printf("  %s", tdk_events[i]);
-	}
-	printf("\n");
-
-	return;
-}
-
-/* These are much like the TDK events in reversed order. */
-static const struct msg_tbl via_reg17[] = {
-	{0x0001, "Auto-Negotiation complete"},
-	{0x0002, "Remote fault detected"},
-	{0x0004, "Link failure detected"},
-	{0x0008, "Bad Start Stream detected"},
-	{0x0010, "Parallel detection fault"},
-	{0x0020, "Extended negotiation page received"},
-	{0x0040, "5B/4B code error detected"},
-	{0x0080, "Jabber detected"},
-	{0, 0},
-};
-
-static void via_tahoe(long ioaddr, int phy_id)
-{
-	int mii_reg16 = mii_val[16];
-	int mii_reg17 = mii_val[17];
-	int mii_reg18 = mii_val[18];
-
-	printf("  VIA Tahoe extended registers: 16 %4.4x  #17 %4.4x  #18 %4.4x.\n",
-		   mii_reg16, mii_reg17, mii_reg18);
-	msg_if_set_fmt(mii_reg17, via_reg17, "   %s\n");
-	printf("   Link %s 10%s Mbps %s duplex\n",
-		   mii_reg18 & 0x2000 ? "up" : "down",
-		   mii_reg18 & 0x0400 ? "0" : "",
-		   mii_reg18 & 0x0800 ? "full" : "half");
-}
-
-/* Information from
-   http://www.via.com.tw/en/datasheet/DS6103110.pdf
-*/
-   
-static void via_vt6103(long ioaddr, int phy_id)
-{
-	printf("  VIA vt6103 error counts since the last check:\n"
-		   "   The link has failed %d times.\n"
-		   "   The receiver has lost lock %d times.\n"
-		   "   There have been %d false carrier/SQE error.\n",
-		   mii_val[21], mii_val[22], mii_val[23]);
-}
-
-/* Information from
-   http://www.via.com.tw/en/Networking/DS6105LOM100.pdf
-*/
-
-static void via_vt6105(long ioaddr, int phy_id)
-{
-	printf("  VIA vt6105 PHY status:\n"
-		   "   Duplex %s  speed %s\n",
-		   mii_val[20] & 0x0001 ? "full" : "half",
-		   mii_val[20] & 0x0002 ? "100" : "10");
-}
-
-/* Information from
-   http://www.via.com.tw/en/Networking/DS6105LOM100.pdf
-*/
-static void intel(long ioaddr, int phy_id)
-{
-	printf("  Intel 8255* PHY #%d extended management registers:\n"
-		   "    Error counts, cleared when read:\n"
-		   "     False carriers %d\n"
-		   "     Link disconnects %d\n"
-		   "     Receive errors %d\n"
-		   "     Rx symbol errors %d.\n"
-		   "     Rx 10Mbps Early End-Of-Frame errors %d.\n"
-		   "     Rx 100Mbps Early End-Of-Frame errors %d.\n"
-		   "     Tx jabber errors %d.\n",
-		   mii_val[18],
-		   mii_val[19], mii_val[20], mii_val[21], mii_val[22], mii_val[23],
-		   mii_val[24], mii_val[25]);
-}
-
-
-/*
- * Local variables:
- *  compile-command: "cc -O -Wall -c libmii.c"
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/packages/mii-diag/mii-diag-2.11/mii-diag.c b/packages/mii-diag/mii-diag-2.11/mii-diag.c
deleted file mode 100644
index 3c47e4a9b5..0000000000
--- a/packages/mii-diag/mii-diag-2.11/mii-diag.c
+++ /dev/null
@@ -1,648 +0,0 @@
-/* Mode: C;
- * mii-diag.c: Examine and set the MII registers of a network interfaces.
-
-	Usage:	mii-diag [-vw] interface.
-
-	This program reads and writes the Media Independent Interface (MII)
-	management registers on network transceivers.  The registers control
-	and report network link settings and errors.  Examples are link speed,
-	duplex, capabilities advertised to the link partner, status LED
-	indications and link error counters.
-
-	Notes:
-	The compile-command is at the end of this source file.
-	This program works with drivers that implement MII ioctl() calls.
-
-	Written/copyright 1997-2003 by Donald Becker <becker@scyld.com>
-
-	This program is free software; you can redistribute it
-	and/or modify it under the terms of the GNU General Public
-	License as published by the Free Software Foundation.
-
-	The author may be reached as becker@scyld.com, or C/O
-	 Scyld Computing Corporation
-	 914 Bay Ridge Road, Suite 220
-	 Annapolis MD 21403
-
-	References
-	http://scyld.com/expert/mii-status.html
-	http://scyld.com/expert/NWay.html
-	http://www.national.com/pf/DP/DP83840.html
-*/
-
-static char version[] =
-"mii-diag.c:v2.11 3/21/2005 Donald Becker (becker@scyld.com)\n"
-" http://www.scyld.com/diag/index.html\n";
-
-static const char usage_msg[] =
-"Usage: %s [--help] [-aDfrRvVw] [-AF <speed+duplex>] [--watch] <interface>.\n";
-static const char long_usage_msg[] =
-"Usage: %s [-aDfrRvVw] [-AF <speed+duplex>] [--watch] <interface>.\n"
-"\n"
-"  This program configures and monitors the transceiver management registers\n"
-"  for network interfaces.  It uses the Media Independent Interface (MII)\n"
-"  standard with additional Linux-specific controls to communicate with the\n"
-"  underlying device driver.  The MII registers control and report network\n"
-"  link settings and errors.  Examples are link speed, duplex, capabilities\n"
-"  advertised to the link partner, status LED indications and link error\n"
-"  counters.\n"
-"\n"
-"   The common usage is\n"
-"      mii-diag eth0\n"
-"\n"
-"   The default interface is \"eth0\".\n"
-" Frequently used options are\n"
-"   -A  --advertise <speed|setting>\n"
-"   -F  --fixed-speed <speed>\n"
-"	Speed is one of: 100baseT4, 100baseTx, 100baseTx-FD, 100baseTx-HD,\n"
-"	                 10baseT, 10baseT-FD, 10baseT-HD\n"
-"   -s  --status     Return exit status 2 if there is no link beat.\n"
-"\n"
-" Less frequently used options are\n"
-"   -a  --all-interfaces  Show the status all interfaces\n"
-"              (Not recommended with options that change settings.)\n"
-"   -D  --debug\n"
-"   -g  --read-parameters 	Get driver-specific parameters.\n"
-"   -G  --set-parameters PARMS	Set driver-specific parameters.\n"
-"       Parameters are comma separated, missing elements retain existing value.\n"
-"   -M  --msg-level LEVEL 	Set the driver message bit map.\n"
-"   -p  --phy ADDR		Set the PHY (MII address) to report.\n"
-"   -r  --restart	Restart the link autonegotiation.\n"
-"   -R  --reset		Reset the transceiver.\n"
-"   -v  --verbose	Report each action taken.\n"
-"   -V  --version	Emit version information.\n"
-"   -w  --watch		Continuously monitor the transceiver and report changes.\n"
-"\n"
-"   This command returns success (zero) if the interface information can be\n"
-"   read.  If the --status option is passed, a zero return means that the\n"
-"   interface has link beat.\n";
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <getopt.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <net/if.h>
-#ifdef use_linux_libc5
-#include <linux/if_arp.h>
-#include <linux/if_ether.h>
-#endif
-
-typedef u_int32_t u32;
-typedef u_int16_t u16;
-typedef u_int8_t u8;
-
-#if defined(SIOCGPARAMS)  && SIOCGPARAMS != SIOCDEVPRIVATE+3
-#error Changed definition for SIOCGPARAMS
-#else
-#define SIOCGPARAMS (SIOCDEVPRIVATE+3) 		/* Read operational parameters. */
-#define SIOCSPARAMS (SIOCDEVPRIVATE+4) 		/* Set operational parameters. */
-#endif
-
-const char shortopts[] = "aA:C:DfF:gG:hmM:p:rRsvVw?";
-struct option longopts[] = {
- /* { name  has_arg  *flag  val } */
-    {"all-interfaces", 0, 0, 'a'},	/* Show all interfaces. */
-	{"advertise",	1, 0, 'A'},		/* Change the capabilities advertised. */
-	{"BMCR",		1, 0, 'C'},		/* Set the control register. */
-    {"debug",       0, 0, 'D'},		/* Increase the debug level. */
-    {"force",       0, 0, 'f'},		/* Force the operation. */
-    {"fixed-speed", 1, 0, 'F'},		/* Fixed speed name. */
-    {"read-parameters", 0, 0, 'g'}, /* Show general settings values. */
-    {"set-parameters",  1, 0, 'G'},	/* Write general settings values. */
-    {"help", 		0, 0, 'h'},		/* Print a long usage message. */
-    {"monitor",		0, 0, 'm'},		/* Monitor status register. */
-    {"msg-level",	1, 0, 'M'},		/* Set the driver message level. */
-    {"phy",			1, 0, 'p'},		/* Set the PHY (MII address) to report. */
-    {"restart",		0, 0, 'r'},		/* Restart the link negotiation */
-    {"reset",		0, 0, 'R'},		/* Reset the transceiver. */
-    {"status",		0, 0, 's'},		/* Non-zero exit status w/ no link beat. */
-    {"verbose", 	0, 0, 'v'},		/* Report each action taken.  */
-    {"version", 	0, 0, 'V'},		/* Emit version information.  */
-    {"watch", 		0, 0, 'w'},		/* Constantly monitor the port.  */
-    {"error", 		0, 0, '?'},		/* Return the error message. */
-    { 0, 0, 0, 0 }
-};
-
-/* Usually in libmii.c, but trivial substitions are below. */
-extern int  show_mii_details(long ioaddr, int phy_id);
-extern void monitor_mii(long ioaddr, int phy_id);
-int  show_mii_details(long ioaddr, int phy_id) __attribute__((weak));
-void monitor_mii(long ioaddr, int phy_id) __attribute__((weak));
-
-
-/* Command-line flags. */
-unsigned int opt_a = 0,					/* Show-all-interfaces flag. */
-	opt_f = 0,					/* Force the operation. */
-	opt_g = 0,
-	opt_G = 0,
-	verbose = 0,				/* Verbose flag. */
-	debug = 0,
-	opt_version = 0,
-	opt_restart = 0,
-	opt_reset = 0,
-	opt_status = 0,
-	opt_watch = 0;
-static int msg_level = -1;
-static int set_BMCR = -1;
-static int nway_advertise = 0;
-static int fixed_speed = -1;
-static int override_phy = -1;
-char *opt_G_string = NULL;
-
-/* Internal values. */
-int new_ioctl_nums;
-int skfd = -1;					/* AF_INET socket for ioctl() calls.	*/
-struct ifreq ifr;
-
-int do_one_xcvr(int skfd);
-int show_basic_mii(long ioaddr, int phy_id);
-int mdio_read(int skfd, int phy_id, int location);
-void mdio_write(int skfd, int phy_id, int location, int value);
-static int parse_advertise(const char *capabilities);
-static void monitor_status(long ioaddr, int phy_id);
-
-
-int
-main(int argc, char **argv)
-{
-	int c, errflag = 0;
-	char **spp, *ifname;
-    char *progname = rindex(argv[0], '/') ? rindex(argv[0], '/')+1 : argv[0];
-
-	while ((c = getopt_long(argc, argv, shortopts, longopts, 0)) != EOF)
-		switch (c) {
-		case 'a': opt_a++; break;
-		case 'A': nway_advertise |= parse_advertise(optarg);
-			if (nway_advertise == -1) errflag++;
-			break;
-		case 'C': set_BMCR = strtoul(optarg, NULL, 16); break;
-		case 'D': debug++;			break;
-		case 'f': opt_f++; break;
-		case 'F': fixed_speed = parse_advertise(optarg);
-			if (fixed_speed == -1) errflag++;
-			break;
-		case 'g': opt_g++; break;
-		case 'G': opt_G++; opt_G_string = strdup(optarg); break;
-		case 'm': opt_watch++; opt_status++; break;
-		case 'M': msg_level = strtoul(optarg, NULL, 0); break;
-		case 'h': fprintf(stderr, long_usage_msg, progname); return 0;
-		case 'p': override_phy = atoi(optarg); break;
-		case 'r': opt_restart++;	break;
-		case 'R': opt_reset++;		break;
-		case 's': opt_status++;		break;
-		case 'v': verbose++;		break;
-		case 'V': opt_version++;	break;
-		case 'w': opt_watch++;		break;
-		case '?': errflag++;		break;
-		}
-	if (errflag) {
-		fprintf(stderr, usage_msg, progname);
-		return 2;
-	}
-
-	if (verbose || opt_version)
-		printf(version);
-
-	/* Open a basic socket. */
-	if ((skfd = socket(AF_INET, SOCK_DGRAM,0)) < 0) {
-		perror("socket");
-		return 1;
-	}
-
-	if (debug)
-		fprintf(stderr, "DEBUG: argc=%d, optind=%d and argv[optind] is %s.\n",
-				argc, optind, argv[optind]);
-
-	/* No remaining args means show all interfaces. */
-	if (optind == argc) {
-		ifname = "eth0";
-		fprintf(stderr, "Using the default interface 'eth0'.\n");
-	} else {
-		/* Copy the interface name. */
-		spp = argv + optind;
-		ifname = *spp++;
-	}
-
-	if (ifname == NULL) {
-		ifname = "eth0";
-		fprintf(stderr, "Using the default interface 'eth0'.\n");
-	}
-
-	/* Verify that the interface supports the ioctl(), and if
-	   it is using the new or old SIOCGMIIPHY value (grrr...).
-	 */
-	{
-		u16 *data = (u16 *)(&ifr.ifr_data);
-
-		strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-		data[0] = 0;
-
-		if (ioctl(skfd, 0x8947, &ifr) >= 0) {
-			new_ioctl_nums = 1;
-		} else if (ioctl(skfd, SIOCDEVPRIVATE, &ifr) >= 0) {
-			new_ioctl_nums = 0;
-		} else {
-			fprintf(stderr, "SIOCGMIIPHY on %s failed: %s\n", ifname,
-					strerror(errno));
-			(void) close(skfd);
-			return 1;
-		}
-		if (verbose)
-			printf("  Using the %s SIOCGMIIPHY value on PHY %d "
-				   "(BMCR 0x%4.4x).\n",
-				   new_ioctl_nums ? "new" : "old", data[0], data[3]);
-	}
-
-	do_one_xcvr(skfd);
-
-	(void) close(skfd);
-	return 0;
-}
-
-int do_one_xcvr(int skfd)
-{
-	u16 *data = (u16 *)(&ifr.ifr_data);
-	u32 *data32 = (u32 *)(&ifr.ifr_data);
-	unsigned phy_id = data[0];
-
-	if (override_phy >= 0) {
-		printf("Using the specified MII PHY index %d.\n", override_phy);
-		phy_id = override_phy;
-	}
-
-	if (opt_g || opt_G || msg_level >= 0) {
-		if (ioctl(skfd, SIOCGPARAMS, &ifr) < 0) {
-			fprintf(stderr, "SIOCGPARAMS on %s failed: %s\n", ifr.ifr_name,
-					strerror(errno));
-			return -1;
-		}
-	}
-	if (opt_g) {
-		int i;
-		printf("Driver general parameter settings:");
-		for (i = 0; i*sizeof(u32) < sizeof(ifr.ifr_ifru); i++) {
-			printf(" %d", data32[i]);
-		}
-		printf(".\n");
-	}
-	if (opt_G) {
-		/* Set up to four arbitrary driver parameters from the -G parameter.
-		   The format is comma separated integers, with a missing element
-		   retaining the previous value.
-		*/
-		char *str = opt_G_string;
-		int i;
-		for (i = 0; str && i < 4; i++) {
-			char *endstr;
-			u32 newval = strtol(str, &endstr, 0);
-			if (debug)
-				printf(" parse string '%s'  value %d end '%s'.\n",
-					   str, newval, endstr);
-			if (str == endstr) {
-				if (endstr[0] == ',') /* No parameter */
-					str = endstr+1;
-				else {
-					fprintf(stderr, "Invalid driver parameter '%s'.\n", str);
-					str = index(str, ',');
-				}
-			} else if (endstr[0] == ',') {
-				data32[i] = newval;
-				str = endstr + 1;
-			} else if (endstr[0] == 0) {
-				data32[i] = newval;
-				break;
-			}
-		}
-		printf("Setting new driver general parameters:");
-		for (i = 0; i*sizeof(u32) < sizeof(ifr.ifr_ifru); i++) {
-			printf(" %d", data32[i]);
-		}
-		printf(".\n");
-		if (ioctl(skfd, SIOCSPARAMS, &ifr) < 0) {
-			fprintf(stderr, "SIOCSPARAMS on %s failed: %s\n", ifr.ifr_name,
-					strerror(errno));
-			return -1;
-		}
-	}
-	if (msg_level >= 0) {
-		data32[0] = msg_level;
-		if (ioctl(skfd, SIOCSPARAMS, &ifr) < 0) {
-			fprintf(stderr, "SIOCSPARAMS on %s failed: %s\n", ifr.ifr_name,
-					strerror(errno));
-			return -1;
-		}
-	}
-
-	if (opt_reset) {
-		printf("Resetting the transceiver...\n");
-		mdio_write(skfd, phy_id, 0, 0x8000);
-	}
-	/* Note: PHY addresses > 32 are pseudo-MII devices, usually built-in. */
-	if (phy_id < 64  &&  nway_advertise > 0) {
-		printf(" Setting the media capability advertisement register of "
-			   "PHY #%d to 0x%4.4x.\n", phy_id, nway_advertise | 1);
-		mdio_write(skfd, phy_id, 4, nway_advertise | 1);
-		mdio_write(skfd, phy_id, 0, 0x1000);
-	}
-
-	if (opt_restart) {
-		printf("Restarting negotiation...\n");
-		mdio_write(skfd, phy_id, 0, 0x0000);
-		mdio_write(skfd, phy_id, 0, 0x1200);
-	}
-	/* To force 100baseTx-HD do  mdio_write(skfd, phy_id, 0, 0x2000); */
-	if (fixed_speed >= 0) {
-		int reg0_val = 0;
-		if (fixed_speed & 0x0180) 		/* 100mpbs */
-			reg0_val |=  0x2000;
-		if ((fixed_speed & 0x0140) &&		/* A full duplex type and */
-			! (fixed_speed & 0x0820)) 		/* no half duplex types. */
-			reg0_val |= 0x0100;
-		printf("Setting the speed to \"fixed\", Control register %4.4x.\n",
-			   reg0_val);
-		mdio_write(skfd, phy_id, 0, reg0_val);
-	}
-	if (set_BMCR >= 0) {
-		printf("Setting the Basic Mode Control Register to 0x%4.4x.\n",
-			   set_BMCR);
-		mdio_write(skfd, phy_id, 0, set_BMCR);
-	}
-
-	if (opt_watch && opt_status)
-		monitor_status(skfd, phy_id);
-
-	show_basic_mii(skfd, phy_id);
-#ifdef LIBMII
-	if (verbose)
-		show_mii_details(skfd, phy_id);
-#else
-	if (verbose || debug) {
-		int mii_reg, mii_val;
-		printf(" MII PHY #%d transceiver registers:", phy_id);
-		for (mii_reg = 0; mii_reg < 32; mii_reg++) {
-			mii_val = mdio_read(skfd, phy_id, mii_reg);
-			printf("%s %4.4x", (mii_reg % 8) == 0 ? "\n  " : "",
-				   mii_val);
-		}
-		printf("\n");
-	}
-#endif
-
-	if (opt_watch)
-		monitor_mii(skfd, phy_id);
-	if (opt_status &&
-		(mdio_read(skfd, phy_id, 1) & 0x0004) == 0)
-		exit(2);
-	return 0;
-}
-
-int mdio_read(int skfd, int phy_id, int location)
-{
-	u16 *data = (u16 *)(&ifr.ifr_data);
-
-	data[0] = phy_id;
-	data[1] = location;
-
-	if (ioctl(skfd, new_ioctl_nums ? 0x8948 : SIOCDEVPRIVATE+1, &ifr) < 0) {
-		fprintf(stderr, "SIOCGMIIREG on %s failed: %s\n", ifr.ifr_name,
-				strerror(errno));
-		return -1;
-	}
-	return data[3];
-}
-
-void mdio_write(int skfd, int phy_id, int location, int value)
-{
-	u16 *data = (u16 *)(&ifr.ifr_data);
-
-	data[0] = phy_id;
-	data[1] = location;
-	data[2] = value;
-
-	if (ioctl(skfd, new_ioctl_nums ? 0x8949 : SIOCDEVPRIVATE+2, &ifr) < 0) {
-		fprintf(stderr, "SIOCSMIIREG on %s failed: %s\n", ifr.ifr_name,
-				strerror(errno));
-	}
-}
-
-/* Parse the command line argument for advertised capabilities. */
-static int parse_advertise(const char *capabilities)
-{
-	const char *mtypes[] = {
-		"100baseT4", "100baseTx", "100baseTx-FD", "100baseTx-HD",
-		"10baseT", "10baseT-FD", "10baseT-HD", 0,
-	};
-	char *endptr;
-	int cap_map[] = { 0x0200, 0x0180, 0x0100, 0x0080, 0x0060, 0x0040, 0x0020,};
-	int i;
-	if ( ! capabilities) {
-		fprintf(stderr, "You passed -A 'NULL'.  You must provide a media"
-				" list to advertise!\n");
-		return -1;
-	}
-	if (debug)
-		fprintf(stderr, "Advertise string is '%s'.\n", capabilities);
-	for (i = 0; mtypes[i]; i++)
-		if (strcasecmp(mtypes[i], capabilities) == 0)
-			return cap_map[i];
-	if ((i = strtol(capabilities, &endptr, 16)) <= 0xffff  &&  endptr[0] == 0)
-		return i;
-	fprintf(stderr, "Invalid media advertisement value '%s'.\n"
-			"  Either pass a numeric value or one of the following names:\n",
-			capabilities);
-	for (i = 0; mtypes[i]; i++)
-		fprintf(stderr, "   %-14s %3.3x\n", mtypes[i], cap_map[i]);
-	return -1;
-}
-
-/* Trivial versions if we don't link against libmii.c */
-static const char *media_names[] = {
-	"10baseT", "10baseT-FD", "100baseTx", "100baseTx-FD", "100baseT4",
-	"Flow-control", 0,
-};
-/* Various non-good bits in the command register. */
-static const char *bmcr_bits[] = {
-	"  Internal Collision-Test enabled!\n", "",		/* 0x0080,0x0100 */
-	"  Restarted auto-negotiation in progress!\n",
-	"  Transceiver isolated from the MII!\n",
-	"  Transceiver powered down!\n", "", "",
-	"  Transceiver in loopback mode!\n",
-	"  Transceiver currently being reset!\n",
-};
-
-int show_basic_mii(long ioaddr, int phy_id)
-{
-	int mii_reg, i;
-	u16 mii_val[32];
-	u16 bmcr, bmsr, new_bmsr, nway_advert, lkpar;
-
-	for (mii_reg = 0; mii_reg < 8; mii_reg++)
-		mii_val[mii_reg] = mdio_read(ioaddr, phy_id, mii_reg);
-	if ( ! verbose) {
-		printf("Basic registers of MII PHY #%d: ", phy_id);
-		for (mii_reg = 0; mii_reg < 8; mii_reg++)
-			printf(" %4.4x", mii_val[mii_reg]);
-		printf(".\n");
-	}
-
-	if (mii_val[0] == 0xffff  ||  mii_val[1] == 0x0000) {
-		printf("  No MII transceiver present!.\n");
-		if (! opt_f) {
-			printf("  Use '--force' to view the information anyway.\n");
-			return -1;
-		}
-	}
-	/* Descriptive rename. */
-	bmcr = mii_val[0];
-	bmsr = mii_val[1];
-	nway_advert = mii_val[4];
-	lkpar = mii_val[5];
-
-	if (lkpar & 0x4000) {
-		int negotiated = nway_advert & lkpar & 0x3e0;
-		int max_capability = 0;
-		/* Scan for the highest negotiated capability, highest priority
-		   (100baseTx-FDX) to lowest (10baseT-HDX). */
-		int media_priority[] = {8, 9, 7, 6, 5}; 	/* media_names[i-5] */
-		printf(" The autonegotiated capability is %4.4x.\n", negotiated);
-		for (i = 0; media_priority[i]; i++)
-			if (negotiated & (1 << media_priority[i])) {
-				max_capability = media_priority[i];
-				break;
-			}
-		if (max_capability)
-			printf("The autonegotiated media type is %s.\n",
-				   media_names[max_capability - 5]);
-		else
-			printf("No common media type was autonegotiated!\n"
-				   "This is extremely unusual and typically indicates a "
-				   "configuration error.\n" "Perhaps the advertised "
-				   "capability set was intentionally limited.\n");
-	}
-	printf(" Basic mode control register 0x%4.4x:", bmcr);
-	if (bmcr & 0x1000)
-		printf(" Auto-negotiation enabled.\n");
-	else
-		printf(" Auto-negotiation disabled, with\n"
-			   " Speed fixed at 10%s mbps, %s-duplex.\n",
-			   bmcr & 0x2000 ? "0" : "",
-			   bmcr & 0x0100 ? "full":"half");
-	for (i = 0; i < 9; i++)
-		if (bmcr & (0x0080<<i))
-			printf(bmcr_bits[i]);
-
-	new_bmsr = mdio_read(ioaddr, phy_id, 1);
-	if ((bmsr & 0x0016) == 0x0004)
-		printf( " You have link beat, and everything is working OK.\n");
-	else
-		printf(" Basic mode status register 0x%4.4x ... %4.4x.\n"
-			   "   Link status: %sestablished.\n",
-			   bmsr, new_bmsr,
-			   bmsr & 0x0004 ? "" :
-			   (new_bmsr & 0x0004) ? "previously broken, but now re" : "not ");
-	if (verbose) {
-		printf("   This transceiver is capable of ");
-		if (bmsr & 0xF800) {
-			for (i = 15; i >= 11; i--)
-				if (bmsr & (1<<i))
-					printf(" %s", media_names[i-11]);
-		} else
-			printf("<Warning! No media capabilities>");
-		printf(".\n");
-		printf("   %s to perform Auto-negotiation, negotiation %scomplete.\n",
-			   bmsr & 0x0008 ? "Able" : "Unable",
-			   bmsr & 0x0020 ? "" : "not ");
-	}
-
-	if (bmsr & 0x0010)
-		printf(" Remote fault detected!\n");
-	if (bmsr & 0x0002)
-		printf("   *** Link Jabber! ***\n");
-
-	if (lkpar & 0x4000) {
-		printf(" Your link partner advertised %4.4x:",
-			   lkpar);
-		for (i = 5; i >= 0; i--)
-			if (lkpar & (0x20<<i))
-				printf(" %s", media_names[i]);
-		printf("%s.\n", lkpar & 0x0400 ? ", w/ 802.3X flow control" : "");
-	} else if (lkpar & 0x00A0)
-		printf(" Your link partner is generating %s link beat  (no"
-			   " autonegotiation).\n",
-			   lkpar & 0x0080 ? "100baseTx" : "10baseT");
-	else if ( ! (bmcr & 0x1000))
-		printf(" Link partner information is not exchanged when in"
-			   " fixed speed mode.\n");
-	else if ( ! (new_bmsr & 0x004))
-							;	/* If no partner, do not report status. */
-	else if (lkpar == 0x0001  ||  lkpar == 0x0000) {
-		printf(" Your link partner does not do autonegotiation, and this "
-			   "transceiver type\n  does not report the sensed link "
-			   "speed.\n");
-	} else
-		printf(" Your link partner is strange, status %4.4x.\n", lkpar);
-
-	printf("   End of basic transceiver information.\n\n");
-	return 0;
-}
-
-static void monitor_status(long ioaddr, int phy_id)
-{
-	unsigned int baseline_1 = 0x55555555; 	/* Always show initial status. */
-
-	while (1) {
-		unsigned int new_1 = mdio_read(ioaddr, phy_id, 1);
-		if (new_1 != baseline_1) {
-			printf("%-12s 0x%4.4x 0x%4.4x\n",
-				   new_1 & 0x04 ? (new_1==0xffff ? "unknown" : "up") :
-				   new_1 & 0x20 ? "negotiating" : "down",
-				   new_1, mdio_read(ioaddr, phy_id, 5));
-			fflush(stdout);
-			baseline_1 = new_1;
-		}
-		sleep(1);
-	}
-}
-
-int  show_mii_details(long ioaddr, int phy_id)
-{
-	int mii_reg, mii_val;
-	printf(" MII PHY #%d transceiver registers:", phy_id);
-	for (mii_reg = 0; mii_reg < 32; mii_reg++) {
-		mii_val = mdio_read(skfd, phy_id, mii_reg);
-		printf("%s %4.4x", (mii_reg % 8) == 0 ? "\n  " : "",
-			   mii_val);
-	}
-	printf("\nThis version of 'mii-diag' has not been linked with "
-			"the libmii.c library.\n"
-			"  That library provides extended transceiver status reports.\n");
-	return 0;
-}
-
-void monitor_mii(long ioaddr, int phy_id)
-{
-	fprintf(stderr, "\nThis version of 'mii-diag' has not been linked with "
-			"the libmii.c library \n"
-			"  required for the media monitor option.\n");
-}
-
-
-
-/*
- * Local variables:
- *  version-control: t
- *  kept-new-versions: 5
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- *  compile-command: "gcc -Wall -Wstrict-prototypes -O mii-diag.c -DLIBMII libmii.c -o mii-diag"
- *  simple-compile-command: "gcc mii-diag.c -o mii-diag"
- * End:
- */