cx3110x: Rearranging completely the cx3110x driver build

    1. Different package names to each kernel. Now we can provide packages to more than one kernel at the same repository.
    2. Creating inc file.
    3. Including init.d script to configure the right module.
    4. Adapting task-mamona to these changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@openbossa.org>

10 files changed, 2404 insertions, 0 deletions

diff --git a/packages/mamona/cx3110x-770he-0.8.1/770_performance_improvements.patch b/packages/mamona/cx3110x-770he-0.8.1/770_performance_improvements.patch
new file mode 100644
index 0000000000..be9be86b82
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/770_performance_improvements.patch
@@ -0,0 +1,307 @@
+Index: cx3110x-0.8.1/src/sm_drv_spi.c
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_spi.c	2008-04-28 18:30:22.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_spi.c	2008-04-28 18:30:25.000000000 -0300
+@@ -99,10 +99,10 @@
+ 	struct net_local *lp = dev->priv;
+ 	uint32_t host_ints, host_ints_ack, target_ints;
+ 	unsigned long timeout;
+-	int result;
++	int result, pass = 1;
+ 	
+ 	DEBUG(DBG_BH, "w\n");
+-	
++again:
+ 	/* Here we wake the target up */
+ 	target_ints = SPI_TARGET_INT_WAKEUP; 
+ 	sm_spi_write(dev, SPI_ADRS_ARM_INTERRUPTS,
+@@ -117,6 +117,11 @@
+ 		if (time_after(jiffies, timeout)) {
+ 			printk(KERN_WARNING "We haven't got a READY interrupt"
+ 			       " from WAKEUP. (firmware crashed?)\n");
++			if (pass == 1) {
++				printk(KERN_WARNING "Try again...\n");
++				pass = 2;
++				goto again;
++			}
+ 			lp->device_state = DEVSTATE_DEAD;
+ 			result = -1;
+ 			goto exit;
+@@ -131,7 +136,10 @@
+ 		     (unsigned char *)&host_ints_ack, sizeof(host_ints_ack));
+ 
+ 	result = 0;
+-	
++
++	if (pass == 2) {
++		printk(KERN_WARNING "succeeded!!!\n");
++	}
+ exit:
+ 	DEBUG(DBG_BH, "W\n");
+ 	return result;
+@@ -150,49 +158,84 @@
+ 	return 0;
+ }
+ 
+-static int sm_drv_spi_rx(struct net_device *dev) 
++static int sm_drv_spi_is_rx_frame_available(struct net_device *dev)
++{
++	uint32_t host_ints, host_ints_ack;
++	sm_spi_read(dev, SPI_ADRS_HOST_INTERRUPTS, (unsigned char *)&host_ints, sizeof(host_ints));
++	if ((host_ints & SPI_HOST_INT_UPDATE) || (host_ints & SPI_HOST_INT_SW_UPDATE)) {
++		host_ints_ack = SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE;
++		sm_spi_write(dev, SPI_ADRS_HOST_INT_ACK, (unsigned char *)&host_ints_ack, sizeof(host_ints_ack));
++		return 1;
++	}
++	return 0;
++}
++
++static struct s_ic_msg * sm_drv_spi_alloc_frame_and_start_rx_transfer(struct net_device *dev)
+ {
+ 	struct net_local *lp = dev->priv;
+-	struct spi_hif_local_data *hif_lp = HIF_LP(lp);
+ 	struct s_sm_frame *frame;
++	unsigned short length;
+ 	struct s_ic_msg *ic_msg;
++
++	frame = frame_skb_alloc(dev, lp->sm_descr.mtu + lp->sm_descr.rxoffset, 0);
++	if (frame == NULL) return NULL;
++
++	/* dummy read to flush SPI DMA controller bug */
++	sm_spi_read(dev, SPI_ADRS_GEN_PURP_1, (unsigned char *)&length, sizeof(length));
++
++	sm_spi_read(dev, SPI_ADRS_DMA_DATA, (unsigned char *)&length, sizeof(length));
++	DEBUG(DBG_BH, "%s: received frame len=%d\n", DRIVER_NAME, length);
++            
++	if (length > SPI_MAX_PACKET_SIZE) 
++		length = SPI_MAX_PACKET_SIZE;
++
++	sm_spi_dma_read_start(dev, SPI_ADRS_DMA_DATA, (unsigned char *) frame->data, length);
++
++	ic_msg = FRAME_ICMSG(frame);
++	ic_msg->frame = frame;
++	ic_msg->channel = 0; 
++	ic_msg->flags   = 0;
++	ic_msg->length  = length;
++	ic_msg->address = 0;
++	ic_msg->data    = frame->data;
++
++	return ic_msg;
++}
++
++static int sm_drv_spi_rx(struct net_device *dev) 
++{
++	struct net_local *lp = dev->priv;
++	struct spi_hif_local_data *hif_lp = HIF_LP(lp);
++	struct s_ic_msg *ic_msg, *ic_msg_next;
+ 	int result, err;
+-	unsigned short length;
+ 	int32_t callb_mask = 0;
+-			
++
+ 	err = sm_drv_spi_wakeup(dev);
+ 	if (err < 0) {
+ 		result = -1;
+ 		goto exit;
+ 	}
+ 	
+-	frame = frame_skb_alloc(dev, lp->sm_descr.mtu + lp->sm_descr.rxoffset,
+-				0);
+-	if (frame != NULL) {
+-		ic_msg = FRAME_ICMSG(frame);
+-		ic_msg->frame = frame;
+-            
+-		/* dummy read to flush SPI DMA controller bug */
+-		sm_spi_read(dev, SPI_ADRS_GEN_PURP_1, (unsigned char *)&length,
+-			    sizeof(length));
+-
+-		sm_spi_read(dev, SPI_ADRS_DMA_DATA, (unsigned char *)&length,
+-			    sizeof(length));
+-            
+-		DEBUG(DBG_BH, "%s: received frame len=%d\n", DRIVER_NAME,
+-		      length);
+-            
+-		if (length > SPI_MAX_PACKET_SIZE) 
+-			length = SPI_MAX_PACKET_SIZE;
++	ic_msg_next = sm_drv_spi_alloc_frame_and_start_rx_transfer(dev);
++	if (ic_msg_next == NULL) {
++		printk("Couldn't allocate RX frame\n");
++		result = -1;
++		goto exit;
++	}
+ 
+-		sm_spi_dma_read(dev, SPI_ADRS_DMA_DATA,
+-				(unsigned char *) frame->data, length);
+-			
+-		ic_msg->channel = 0; 
+-		ic_msg->flags   = 0;
+-		ic_msg->length  = length;
+-		ic_msg->address = 0;
+-		ic_msg->data    = frame->data;
++	while (ic_msg_next) {
++		sm_spi_dma_read_wait_for_completion();
++		ic_msg = ic_msg_next;
++		ic_msg_next = NULL;
++
++		if (sm_drv_spi_is_rx_frame_available(dev)) {
++			ic_msg_next = sm_drv_spi_alloc_frame_and_start_rx_transfer(dev);
++			if (ic_msg_next == NULL) {
++				printk("Couldn't allocate RX frame\n");
++				result = -1;
++				goto exit;
++			}
++		}
+ 			
+ 		hif_lp->spi_packets++;
+ 		spin_lock_bh(&lp->sm_lock);
+@@ -207,13 +250,14 @@
+ 			
+ 		DEBUG(DBG_IC,"Callback mask: %d\n", callb_mask);
+ 			
+-		if(callb_mask < 0)
++		if (callb_mask < 0) {
+ 			printk(KERN_WARNING "prism_interconnect_message_handle"
+ 			       "returned error %d\n", callb_mask);
+-	} else
+-		printk("Couldn't allocate RX frame\n");
+-
+-	handle_sm_callback(dev, callb_mask);
++			result = -1;
++			goto exit;
++		}
++		handle_sm_callback(dev, callb_mask);
++	}
+ 
+ 	result = 0;
+ 
+Index: cx3110x-0.8.1/src/sm_drv_spi_io.c
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_spi_io.c	2008-04-28 18:30:25.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_spi_io.c	2008-04-28 18:35:59.000000000 -0300
+@@ -120,7 +120,7 @@
+ }
+ 
+ 
+-int cx3110x_spi_dma_read(struct net_device *dev, unsigned long address, void * buffer, unsigned int length)
++int cx3110x_spi_dma_read_start(struct net_device *dev, unsigned long address, void * buffer, unsigned int length)
+ {
+ 	SPI_CS_ON();
+ 
+@@ -170,13 +170,22 @@
+ 	omap_start_dma(spi_dma.dma_rx_ch);
+ 	omap_start_dma(spi_dma.dma_tx_ch);
+ 
+-	/* Wait for reading to complete */
+-	while(!spi_dma.dma_rx_done) {
+-		udelay(5);
++	return 0;
++}
++
++int cx3110x_spi_dma_read_wait_for_completion()
++{
++	int wait_limit = 15000 * 5;
++	int wait_cycles = 0;
++
++	/* Wait for DMA reading to complete */
++	while ((!spi_dma.dma_rx_done || !spi_dma.dma_tx_done) && wait_cycles < wait_limit) {
++		wait_cycles++;
++		udelay(1);
+ 	}
+ 
+-	while(!spi_dma.dma_tx_done) {
+-		udelay(5);
++	if (wait_cycles >= wait_limit) {
++		printk("McBSP read DMA timeout, spi_dma.dma_rx_done=%d, spi_dma.dma_tx_done=%d\n", spi_dma.dma_rx_done, spi_dma.dma_tx_done);
+ 	}
+ 
+ 	spi_dma.dma_rx_done = 0;
+@@ -184,11 +193,14 @@
+ 
+ 	SPI_CS_OFF();
+ 
+-	return 0;
++	return wait_cycles;
+ }
+ 
+ int cx3110x_spi_dma_write(struct net_device *dev, unsigned long address, void * buffer, unsigned int length)
+ {
++	int wait_limit = 15000 * 5;
++	int wait_cycles = 0;
++
+ 	SPI_CS_ON();
+ 
+ 	omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, address << 8);
+@@ -239,16 +251,20 @@
+ 	omap_start_dma(spi_dma.dma_rx_ch);
+ 	omap_start_dma(spi_dma.dma_tx_ch);
+ 
+-	/* We don't want to turn CS off before transfer is done */
+-
+-        while(!spi_dma.dma_rx_done) {
+-                udelay(5);
++	/* Wait for DMA writing to complete */
++	while ((!spi_dma.dma_rx_done || !spi_dma.dma_tx_done) && wait_cycles < wait_limit) {
++		wait_cycles++;
++		udelay(1);
+         }
+ 
+ 	while(!spi_dma.dma_tx_done) {
+ 		udelay(5);
+ 	}
+ 
++	if (wait_cycles >= wait_limit) {
++		printk("McBSP write DMA timeout, spi_dma.dma_rx_done=%d, spi_dma.dma_tx_done=%d\n", spi_dma.dma_rx_done, spi_dma.dma_tx_done);
++	}
++
+ 	spi_dma.dma_rx_done = 0;
+ 	spi_dma.dma_tx_done = 0;
+ 
+@@ -320,7 +336,7 @@
+ int cx3110x_spi_start(struct net_device *dev)
+ {
+ 	struct omap_mcbsp_spi_cfg spi_cfg;
+-	int r, div = 1, rate_mhz, max_mhz = 14;
++	int r, div = 1, rate_mhz, max_mhz = 16;
+ 	struct net_local * lp;
+ 	struct spi_hif_local_data * spi_lp;
+ 
+@@ -368,11 +384,11 @@
+ 	
+ 	cx3110x_hw_reset();
+ 	
+-	while(rate_mhz/div >= max_mhz)
++	while(rate_mhz/(div+1) >= max_mhz)
+ 		div++;
+ 		
+-        printk("McBSP2: freq_limit=%dMHz, base_freq=%dMHz, divisor=%d (%d.%dMHz)\n",
+-                max_mhz, rate_mhz, div, rate_mhz / div, (rate_mhz * 10 / div) % 10);
++	printk("McBSP2: freq_limit=%dMHz, base_freq=%dMHz, div=%d (%d.%dMHz)\n",
++		max_mhz, rate_mhz, div, rate_mhz / (div+1), (rate_mhz * 10 / (div+1)) % 10);
+ 
+ 	spi_dma.dma_tx_done = 0;
+ 	spi_dma.dma_rx_done = 0;
+Index: cx3110x-0.8.1/src/sm_drv_spi_io.h
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_spi_io.h	2008-04-28 18:30:22.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_spi_io.h	2008-04-28 18:30:25.000000000 -0300
+@@ -27,15 +27,17 @@
+ 
+ int cx3110x_spi_read(struct net_device * dev, unsigned long address, unsigned char * buffer, unsigned int length);
+ int cx3110x_spi_write(struct net_device * dev, unsigned long address, unsigned char * buffer, unsigned int length);
+-int cx3110x_spi_dma_read(struct net_device *dev, unsigned long address, void * buffer, unsigned int length);
++int cx3110x_spi_dma_read_start(struct net_device *dev, unsigned long address, void * buffer, unsigned int length);
++int cx3110x_spi_dma_read_wait_for_completion(void);
+ int cx3110x_spi_dma_write(struct net_device *dev, unsigned long address, void * buffer, unsigned int length);
+ 
+ void cx3110x_dump_register(struct net_device * dev);
+ 
+-#define sm_spi_read(dev, addr, data, len)     cx3110x_spi_read(dev, (addr), (data), (len))  
++#define sm_spi_read(dev, addr, data, len)     cx3110x_spi_read(dev, (addr), (data), (len))
+ #define sm_spi_write(dev, addr, data, len)    cx3110x_spi_write(dev, (addr), (data), (len))
+ 
+-#define sm_spi_dma_read(dev, addr, data, len)     cx3110x_spi_dma_read(dev, (addr), (data), (len))
++#define sm_spi_dma_read_start(dev, addr, data, len)     cx3110x_spi_dma_read_start(dev, (addr), (data), (len))
++#define sm_spi_dma_read_wait_for_completion()        cx3110x_spi_dma_read_wait_for_completion()
+ #define sm_spi_dma_write(dev, addr, data, len)    cx3110x_spi_dma_write(dev, (addr), (data), (len))
+ 
+ #endif
diff --git a/packages/mamona/cx3110x-770he-0.8.1/create_sysfs_link_for_wlan0.patch b/packages/mamona/cx3110x-770he-0.8.1/create_sysfs_link_for_wlan0.patch
new file mode 100644
index 0000000000..cf4fa1e96a
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/create_sysfs_link_for_wlan0.patch
@@ -0,0 +1,11 @@
+--- cx3110x-0.8.1.new/src/sm_drv_spi.c	2008-05-13 10:27:19.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_spi.c	2008-05-12 19:02:16.000000000 -0300
+@@ -1067,6 +1067,8 @@
+ 		goto err_out_4;
+ 	}
+ 
++        SET_NETDEV_DEV(dev, &wlan_omap_device.dev);
++
+ 	register_netdev(dev);
+ 	
+ 	/* Let's fetch the firmware from userspace */
diff --git a/packages/mamona/cx3110x-770he-0.8.1/cx3110x b/packages/mamona/cx3110x-770he-0.8.1/cx3110x
new file mode 100755
index 0000000000..93e59afa55
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/cx3110x
@@ -0,0 +1,36 @@
+#!/bin/sh
+
+MODULE="/lib/modules/`uname -r`/cx3110x.ko"
+
+swap_module () {
+    if [ -e $MODULE ]; then
+        # Removing builtin driver
+        rmmod cx3110x
+        # Inserting the new one
+        insmod $MODULE
+        # Getting up the interface to make the firmware being loaded (stupid, i know)
+        ifconfig wlan0 up
+    else
+        echo "OOPS: $MODULE not found, the switch is not possible" 1>&2
+    fi
+}
+
+case "$1" in
+    start)
+	swap_module
+	;;
+    stop)
+	ifconfig $IFACE down
+	rmmod cx3110x
+	;;
+    force-reload | restart)
+	swap_module
+	;;
+    *)
+	echo "Usage: /etc/init.d/cx3110x {start|stop|restart|force-reload}"
+	exit 1
+	;;
+esac
+
+exit 0
+
diff --git a/packages/mamona/cx3110x-770he-0.8.1/cx3110x.patch b/packages/mamona/cx3110x-770he-0.8.1/cx3110x.patch
new file mode 100644
index 0000000000..06340581d1
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/cx3110x.patch
@@ -0,0 +1,492 @@
+Index: cx3110x-0.8.1/src/sm_drv_ioctl_umac.c
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_ioctl_umac.c	2007-10-15 08:56:20.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_ioctl_umac.c	2008-04-22 15:50:45.000000000 -0300
+@@ -76,7 +76,7 @@
+ 	kfree(wrqu.data.pointer);
+ }
+ 
+-void send_wpa_ie_event(struct net_device *dev, char * bss_addr, char * wpa_ie, size_t wpa_ie_len, uint32_t event)
++void send_wpa_ie_event(struct net_device *dev, char * wpa_ie, size_t wpa_ie_len, uint32_t event)
+ {
+ 	union iwreq_data wrqu;
+ 	uint32_t we_event;
+@@ -97,15 +97,12 @@
+ 		return;
+ 	}
+ 
+-	wrqu.data.pointer = kzalloc(ETH_ALEN + 1 + wpa_ie_len, GFP_ATOMIC);
++	wrqu.data.pointer = kzalloc(wpa_ie_len, GFP_ATOMIC);
+ 	if (!wrqu.data.pointer)
+ 		return;
+ 
+-	memcpy(wrqu.data.pointer, bss_addr, ETH_ALEN);
+-	*((char *)(wrqu.data.pointer + ETH_ALEN)) = ':';	
+-	memcpy(wrqu.data.pointer + ETH_ALEN + 1, wpa_ie, wpa_ie_len);
+-	
+-	wrqu.data.length = ETH_ALEN + 1 + wpa_ie_len;
++	memcpy(wrqu.data.pointer, wpa_ie, wpa_ie_len);
++	wrqu.data.length = wpa_ie_len;
+ 
+ 	wireless_send_event(dev, we_event, &wrqu, wrqu.data.pointer);
+ 	kfree(wrqu.data.pointer);
+@@ -495,7 +492,7 @@
+ 	/* We send the event after parsing the association frame */
+ 	if ((lp->link_state == DOT11_STATE_ASSOCING || lp->link_state == DOT11_STATE_ASSOC)  
+ 	    && event)
+-		send_wpa_ie_event(dev, bssid, wpa_ie, wpa_ie_len, event);
++		send_wpa_ie_event(dev, wpa_ie, wpa_ie_len, event);
+ 			
+ 	/* try to use existing entry */
+ 	list_for_each_entry_safe(bss, safe, &lp->bss_wpa_list, list) {
+@@ -1782,6 +1779,435 @@
+ 	return sm_drv_oid_set(dev, DOT11_OID_STAKEY, (void *)&key, sizeof(struct obj_stakey));
+ }
+ 
++static int sm_drv_set_auth(struct net_device *dev,
++			   struct iw_request_info *info,
++			   union iwreq_data *wrqu, char *extra)
++{
++	struct net_local *priv = netdev_priv(dev);
++	struct iw_param *param = &wrqu->param;
++	u32 authen = 0, dot1x = 0;
++	u32 exunencrypt = 0, privinvoked = 0, wpa = 0;
++	u32 old_wpa;
++	int ret = 0;
++
++	DEBUG(DBG_IOCTL, "SET AUTH\n");
++
++	/* first get the flags */
++	down(&priv->wpa_sem);
++	wpa = old_wpa = priv->wpa;
++	up(&priv->wpa_sem);
++	ret = sm_drv_oid_get(dev, DOT11_OID_AUTHENABLE,
++			     (void *)&authen, sizeof(uint32_t));
++	ret |= sm_drv_oid_get(dev, DOT11_OID_PRIVACYINVOKED,
++			      (void *)&privinvoked, sizeof(uint32_t));
++	ret |= sm_drv_oid_get(dev, DOT11_OID_EXUNENCRYPTED,
++			      (void *)&exunencrypt, sizeof(uint32_t));
++	ret |= sm_drv_oid_get(dev, DOT11_OID_DOT1XENABLE,
++			      (void *)&dot1x, sizeof(uint32_t));
++
++	if (ret < 0)
++		goto out;
++
++	switch (param->flags & IW_AUTH_INDEX) {
++	case IW_AUTH_CIPHER_PAIRWISE:
++	case IW_AUTH_CIPHER_GROUP:
++	case IW_AUTH_KEY_MGMT:
++		break;
++
++	case IW_AUTH_WPA_ENABLED:
++		/* Do the same thing as IW_AUTH_WPA_VERSION */
++		if (param->value) {
++			wpa = DOT11_PRIV_INV_TKIP;
++			privinvoked = 1; /* For privacy invoked */
++			exunencrypt = 1; /* Filter out all unencrypted frames */
++			dot1x = 0x01; /* To enable eap filter */
++			authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */
++		} else {
++			wpa = DOT11_PRIV_INV_NONE;
++			privinvoked = 0;
++			exunencrypt = 0; /* Do not filter un-encrypted data */
++			dot1x = 0;
++		}
++		break;
++
++	case IW_AUTH_WPA_VERSION:
++		if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
++			wpa = DOT11_PRIV_INV_NONE;
++			privinvoked = 0;
++			exunencrypt = 0; /* Do not filter un-encrypted data */
++			dot1x = 0;
++		} else {
++			if (param->value & IW_AUTH_WPA_VERSION_WPA)
++				wpa = DOT11_PRIV_INV_TKIP;
++			else if (param->value & IW_AUTH_WPA_VERSION_WPA2)
++				wpa = DOT11_PRIV_INV_AES_CCMP;
++			privinvoked = 1; /* For privacy invoked */
++			exunencrypt = 1; /* Filter out all unencrypted frames */
++			dot1x = 0x01; /* To enable eap filter */
++			authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */
++		}
++		break;
++
++	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
++		/* dot1x should be the opposite of RX_UNENCRYPTED_EAPOL;
++		 * turn off dot1x when allowing receipt of unencrypted EAPOL
++		 * frames, turn on dot1x when receipt should be disallowed
++		 */
++		dot1x = param->value ? 0 : 0x01;
++		break;
++
++	case IW_AUTH_PRIVACY_INVOKED:
++		privinvoked = param->value ? 1 : 0;
++		break;
++
++	case IW_AUTH_DROP_UNENCRYPTED:
++		exunencrypt = param->value ? 1 : 0;
++		break;
++
++	case IW_AUTH_80211_AUTH_ALG:
++		if (param->value & IW_AUTH_ALG_SHARED_KEY) {
++			/* Only WEP uses _SK and _BOTH */
++			if (wpa > 0) {
++				ret = -EINVAL;
++				goto out;
++			}
++			authen = DOT11_AUTH_SK;
++		} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
++			authen = DOT11_AUTH_OS;
++		} else {
++			ret = -EINVAL;
++			goto out;
++		}
++		break;
++
++	default:
++		return -EOPNOTSUPP;
++	}
++
++	/* Set all the values */
++	down(&priv->wpa_sem);
++	priv->wpa = wpa;
++	up(&priv->wpa_sem);
++
++	sm_drv_oid_set(dev, DOT11_OID_AUTHENABLE,
++		       (void *)&authen, sizeof(uint32_t));
++	sm_drv_oid_set(dev, DOT11_OID_PRIVACYINVOKED,
++		       (void *)&privinvoked, sizeof(uint32_t));
++	sm_drv_oid_set(dev, DOT11_OID_EXUNENCRYPTED,
++		       (void *)&exunencrypt, sizeof(uint32_t));
++	sm_drv_oid_set(dev, DOT11_OID_DOT1XENABLE,
++		       (void *)&dot1x, sizeof(uint32_t));
++
++ out:
++	return ret;
++}
++
++static int sm_drv_get_auth(struct net_device *dev,
++			   struct iw_request_info *info,
++			   union iwreq_data *wrqu, char *extra)
++{
++	struct net_local *priv = netdev_priv(dev);
++	struct iw_param *param = &wrqu->param;
++	u32 authen = 0, dot1x = 0;
++	u32 exunencrypt = 0, privinvoked = 0, wpa = 0;
++	int ret = 0;
++
++	DEBUG(DBG_IOCTL, "GET AUTH\n");
++
++	/* first get the flags */
++	down(&priv->wpa_sem);
++	wpa = priv->wpa;
++	up(&priv->wpa_sem);
++
++	switch (param->flags & IW_AUTH_INDEX) {
++	case IW_AUTH_CIPHER_PAIRWISE:
++	case IW_AUTH_CIPHER_GROUP:
++	case IW_AUTH_KEY_MGMT:
++		/*
++		 * wpa_supplicant will control these internally
++		 */
++		ret = -EOPNOTSUPP;
++		break;
++
++	case IW_AUTH_WPA_VERSION:
++		switch (wpa) {
++		case DOT11_PRIV_INV_TKIP:
++			param->value = IW_AUTH_WPA_VERSION_WPA;
++			break;
++		case DOT11_PRIV_INV_AES_CCMP:
++			param->value = IW_AUTH_WPA_VERSION_WPA2;
++			break;
++		default:
++			param->value = IW_AUTH_WPA_VERSION_DISABLED;
++			break;
++		}
++		break;
++
++	case IW_AUTH_DROP_UNENCRYPTED:
++		ret = sm_drv_oid_get(dev, DOT11_OID_EXUNENCRYPTED,
++				     (void *)&exunencrypt, sizeof(uint32_t));
++		if (ret >= 0)
++			param->value = exunencrypt > 0 ? 1 : 0;
++		break;
++
++	case IW_AUTH_80211_AUTH_ALG:
++		ret = sm_drv_oid_get(dev, DOT11_OID_AUTHENABLE,
++				     (void *)&authen, sizeof(uint32_t));
++		if (ret >= 0) {
++			switch (authen) {
++			case DOT11_AUTH_OS:
++				param->value = IW_AUTH_ALG_OPEN_SYSTEM;
++				break;
++			case DOT11_AUTH_BOTH:
++			case DOT11_AUTH_SK:
++				param->value = IW_AUTH_ALG_SHARED_KEY;
++			case DOT11_AUTH_NONE:
++			default:
++				param->value = 0;
++				break;
++			}
++		}
++		break;
++
++	case IW_AUTH_WPA_ENABLED:
++		param->value = wpa > 0 ? 1 : 0;
++		break;
++
++	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
++		ret = sm_drv_oid_get(dev, DOT11_OID_DOT1XENABLE,
++				     (void *)&dot1x, sizeof(uint32_t));
++		if (ret >= 0)
++			param->value = dot1x > 0 ? 1 : 0;
++		break;
++
++	case IW_AUTH_PRIVACY_INVOKED:
++		ret = sm_drv_oid_get(dev, DOT11_OID_PRIVACYINVOKED,
++				     (void *)&privinvoked, sizeof(uint32_t));
++		if (ret >= 0)
++			param->value = privinvoked > 0 ? 1 : 0;
++		break;
++
++	default:
++		return -EOPNOTSUPP;
++	}
++	return ret;
++}
++
++#define KEY_SIZE_WEP104 13	/* 104/128-bit WEP keys */
++#define KEY_SIZE_WEP40  5	/* 40/64-bit WEP keys */
++#define KEY_SIZE_TKIP   32	/* TKIP keys */
++
++static int sm_drv_set_encodeext(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu,
++				char *extra)
++{
++	struct iw_point *encoding = &wrqu->encoding;
++	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
++	int idx, alg = ext->alg, set_key = 1;
++	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0;
++	int ret = 0;
++
++	DEBUG(DBG_IOCTL, "SET ENCODEEXT\n");
++
++	/* Determine and validate the key index */
++	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
++	if (idx) {
++		if (idx < 0 || idx > 3)
++			return -EINVAL;
++	} else {
++		ret = sm_drv_oid_get(dev, DOT11_OID_DEFKEYID,
++				     (void *)&idx, sizeof(uint32_t));
++		if (ret < 0)
++			goto out;
++	}
++
++	if (encoding->flags & IW_ENCODE_DISABLED)
++		alg = IW_ENCODE_ALG_NONE;
++
++	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
++		/* Only set transmit key index here, actual
++		 * key is set below if needed.
++		 */
++		ret = sm_drv_oid_set(dev, DOT11_OID_DEFKEYID,
++				     (void *)&idx, sizeof(uint32_t));
++		set_key = ext->key_len > 0 ? 1 : 0;
++	}
++
++	if (set_key) {
++		switch (alg) {
++		case IW_ENCODE_ALG_NONE:
++			break;
++		case IW_ENCODE_ALG_WEP: {
++			struct obj_key key = { DOT11_PRIV_WEP, 0, "" };
++			memset(key.key, 0, sizeof(key.key));
++			if (ext->key_len > KEY_SIZE_WEP104) {
++				ret = -EINVAL;
++				goto out;
++			}
++			if (ext->key_len > KEY_SIZE_WEP40)
++				key.length = KEY_SIZE_WEP104;
++			else
++				key.length = KEY_SIZE_WEP40;
++			memcpy(key.key, ext->key, ext->key_len);
++			ret = sm_drv_oid_set(dev, DOT11_OID_DEFKEYID + idx + 1,
++					     (void *)&key,
++					     sizeof(struct obj_key));
++			break;
++		}
++		case IW_ENCODE_ALG_TKIP:
++		case IW_ENCODE_ALG_CCMP: {
++			struct obj_stakey key;
++			memset(key.key, 0, sizeof(key.key));
++			if (alg == IW_ENCODE_ALG_TKIP)
++				key.type = DOT11_PRIV_TKIP;
++			else
++				key.type = DOT11_PRIV_AES_CCMP;
++			memcpy(key.address, ext->addr.sa_data, ETH_ALEN);
++			key.length = ext->key_len;
++			key.keyid = idx;
++			key.ext = 0;
++			memcpy(key.key, ext->key, ext->key_len);
++			ret = sm_drv_oid_set(dev, DOT11_OID_STAKEY,
++					     (void *)&key,
++					     sizeof(struct obj_stakey));
++			break;
++		}
++		default:
++			return -EINVAL;
++		}
++
++		if (ret < 0)
++			goto out;
++
++	}
++
++	/* Read the flags */
++	if (encoding->flags & IW_ENCODE_DISABLED) {
++		/* Encoding disabled,
++		 * authen = DOT11_AUTH_OS;
++		 * invoke = 0;
++		 * exunencrypt = 0; */
++	}
++	if (encoding->flags & IW_ENCODE_OPEN) {
++		/* Encode but accept non-encoded packets. No auth */
++		invoke = 1;
++	}
++	if (encoding->flags & IW_ENCODE_RESTRICTED) {
++		/* Refuse non-encoded packets. Auth */
++		authen = DOT11_AUTH_BOTH;
++		invoke = 1;
++		exunencrypt = 1;
++	}
++
++	/* do the change if requested  */
++	if (encoding->flags & IW_ENCODE_MODE) {
++		sm_drv_oid_set(dev, DOT11_OID_AUTHENABLE,
++			       (void *)&authen, sizeof(uint32_t));
++		sm_drv_oid_set(dev, DOT11_OID_PRIVACYINVOKED,
++			       (void *)&invoke, sizeof(uint32_t));
++		sm_drv_oid_set(dev, DOT11_OID_EXUNENCRYPTED,
++			       (void *)&exunencrypt, sizeof(uint32_t));
++	}
++
++ out:
++	return ret;
++}
++
++
++static int sm_drv_get_encodeext(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu,
++				char *extra)
++{
++	struct net_local *priv = netdev_priv(dev);
++	struct iw_point *encoding = &wrqu->encoding;
++	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
++	int idx, max_key_len;
++	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0, wpa = 0;
++	int ret = 0;
++
++	DEBUG(DBG_IOCTL, "GET ENCODEEXT\n");
++
++	/* first get the flags */
++	ret = sm_drv_oid_get(dev, DOT11_OID_AUTHENABLE,
++			     (void *)&authen, sizeof(uint32_t));
++	ret |= sm_drv_oid_get(dev, DOT11_OID_PRIVACYINVOKED,
++			      (void *)&invoke, sizeof(uint32_t));
++	ret |= sm_drv_oid_get(dev, DOT11_OID_EXUNENCRYPTED,
++			      (void *)&exunencrypt, sizeof(uint32_t));
++	if (ret < 0)
++		goto out;
++
++	max_key_len = encoding->length - sizeof(*ext);
++	if (max_key_len < 0)
++		return -EINVAL;
++
++	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
++	if (idx) {
++		if (idx < 0 || idx > 3)
++			return -EINVAL;
++	} else {
++		ret = sm_drv_oid_get(dev, DOT11_OID_DEFKEYID,
++				     (void *)&idx, sizeof(uint32_t));
++		if (ret < 0)
++			goto out;
++	}
++
++	encoding->flags = idx + 1;
++	memset(ext, 0, sizeof(*ext));
++
++	switch (authen) {
++	case DOT11_AUTH_BOTH:
++	case DOT11_AUTH_SK:
++		wrqu->encoding.flags |= IW_ENCODE_RESTRICTED;
++	case DOT11_AUTH_OS:
++	default:
++		wrqu->encoding.flags |= IW_ENCODE_OPEN;
++		break;
++	}
++
++	down(&priv->wpa_sem);
++	wpa = priv->wpa;
++	up(&priv->wpa_sem);
++
++	if (authen == DOT11_AUTH_OS && !exunencrypt && !invoke && !wpa) {
++		/* No encryption */
++		ext->alg = IW_ENCODE_ALG_NONE;
++		ext->key_len = 0;
++		wrqu->encoding.flags |= IW_ENCODE_DISABLED;
++	} else {
++		struct obj_key *key;
++
++		ret = sm_drv_oid_get(dev, DOT11_OID_DEFKEYID + idx + 1,
++				     (void *)&key, sizeof(struct obj_key));
++		if (ret < 0)
++			goto out;
++		if (max_key_len < key->length) {
++			ret = -E2BIG;
++			goto out;
++		}
++		memcpy(ext->key, key->key, key->length);
++		ext->key_len = key->length;
++
++		switch (key->type) {
++		case DOT11_PRIV_TKIP:
++			ext->alg = IW_ENCODE_ALG_TKIP;
++			break;
++		case DOT11_PRIV_AES_CCMP:
++			ext->alg = IW_ENCODE_ALG_CCMP;
++			break;
++		default:
++		case DOT11_PRIV_WEP:
++			ext->alg = IW_ENCODE_ALG_WEP;
++			break;
++		}
++		wrqu->encoding.flags |= IW_ENCODE_ENABLED;
++	}
++
++ out:
++	return ret;
++}
+ 
+ /* Private handlers */
+ 
+@@ -2155,10 +2581,10 @@
+ 	(iw_handler) NULL,			/* -- hole -- */
+ 	(iw_handler) sm_drv_set_genie,          /* SIOCSIWGENIE*/
+ 	(iw_handler) NULL,	                /* SIOCGIWGENIE */
+-	(iw_handler) NULL,	                /* SIOCSIWAUTH */
+-	(iw_handler) NULL,	                /* SIOCGIWAUTH */
+-	(iw_handler) NULL,	                /* SIOCSIWENCODEEXT */
+-	(iw_handler) NULL,	                /* SIOCGIWENCODEEXT */
++	(iw_handler) sm_drv_set_auth,	        /* SIOCSIWAUTH */
++	(iw_handler) sm_drv_get_auth,	        /* SIOCGIWAUTH */
++	(iw_handler) sm_drv_set_encodeext,      /* SIOCSIWENCODEEXT */
++	(iw_handler) sm_drv_get_encodeext,      /* SIOCGIWENCODEEXT */
+ 	(iw_handler) sm_drv_set_pmk,		/* SIOCSIWPMKSA */
+ };
+ 
diff --git a/packages/mamona/cx3110x-770he-0.8.1/defconfig b/packages/mamona/cx3110x-770he-0.8.1/defconfig
new file mode 100644
index 0000000000..7119b50f34
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/defconfig
@@ -0,0 +1,1380 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16.27-omap1
+# Fri Apr 18 16:19:13 2008
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+CONFIG_MACH_NOKIA770=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+CONFIG_OMAP_DSP_TASK_MULTIOPEN=y
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+# CONFIG_IP_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=y
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+CONFIG_IP_NF_TARGET_IDLETIMER=y
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIBRF6150=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_TOTO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_OMAP_HW=y
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_ONENAND_SYNC_READ is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_OMAP is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_OMAP_RNG=y
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_OMAP_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_OMAP=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+CONFIG_SENSORS_TLV320AIC23_ESD_WORKAROUND=y
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+CONFIG_NOKIA_OMAP_USBTEST=m
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+CONFIG_FB_OMAP_LCD_MIPID=y
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_OMAP_AIC23=y
+# CONFIG_SND_OMAP_TSC2101 is not set
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_BANDWIDTH=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BROKEN_RFD=y
+CONFIG_MMC_BULKTRANSFER=y
+CONFIG_MMC_OMAP=y
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+CONFIG_OMAP_UWIRE=y
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+CONFIG_CBUS=y
+CONFIG_CBUS_TAHVO=y
+CONFIG_CBUS_TAHVO_USER=y
+CONFIG_CBUS_TAHVO_USB=y
+# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_USER=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_RTC=y
+CONFIG_CBUS_RETU_WDT=y
+CONFIG_CBUS_RETU_HEADSET=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+CONFIG_SECURITY_LOWMEM=y
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/mamona/cx3110x-770he-0.8.1/fix_cross_makefile.patch b/packages/mamona/cx3110x-770he-0.8.1/fix_cross_makefile.patch
new file mode 100644
index 0000000000..1f75f094b8
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/fix_cross_makefile.patch
@@ -0,0 +1,11 @@
+Index: cx3110x-0.8.1/src/Makefile
+===================================================================
+--- cx3110x-0.8.1.orig/src/Makefile	2008-04-28 15:58:24.000000000 -0300
++++ cx3110x-0.8.1/src/Makefile	2008-04-28 15:58:28.000000000 -0300
+@@ -1,5 +1,5 @@
+ ifeq ($(KERNELRELEASE),)
+-STRIP = arm-linux-strip
++STRIP = $(CROSS_COMPILE)strip
+ PWD := $(shell pwd)
+ 
+ .PHONY: modules clean
diff --git a/packages/mamona/cx3110x-770he-0.8.1/fix_mem_allign.patch b/packages/mamona/cx3110x-770he-0.8.1/fix_mem_allign.patch
new file mode 100644
index 0000000000..6c452196aa
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/fix_mem_allign.patch
@@ -0,0 +1,94 @@
+Index: cx3110x-0.8.1/src/sm_drv_spi_io.c
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_spi_io.c	2008-04-22 14:54:42.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_spi_io.c	2008-04-22 15:00:07.000000000 -0300
+@@ -240,18 +240,21 @@
+ 	omap_start_dma(spi_dma.dma_tx_ch);
+ 
+ 	/* We don't want to turn CS off before transfer is done */
+-	
++
++        while(!spi_dma.dma_rx_done) {
++                udelay(5);
++        }
++
+ 	while(!spi_dma.dma_tx_done) {
+ 		udelay(5);
+ 	}
+ 
++	spi_dma.dma_rx_done = 0;
+ 	spi_dma.dma_tx_done = 0;
+ 
+ 	/* UMAC may send us odd number of bytes long frames */
+ 	if (length % 2) {
+-		u16 last_word;
+-		
+-		last_word = *(uint16_t *)(buffer + length - 1);		
++		u16 last_word = *((uint8_t *)buffer + length - 1);
+ 		omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, last_word);
+ 	}
+ 
+@@ -264,7 +267,6 @@
+ int cx3110x_spi_read(struct net_device *dev, unsigned long address, unsigned char * buffer, unsigned int length)
+ {
+ 	int i;
+-	u16 * short_buffer = (u16 *) buffer;
+ 	unsigned int r_length = length >> 1;
+ 
+ 	DEBUG(DBG_SPI_IO, "omap_wlan_spi_read\n");
+@@ -274,8 +276,13 @@
+ 	omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, 
+ 				      (address << 8) | ADDR_READ_BIT_15);
+ 
+-	for (i = 0 ; i < r_length ; i++)
+-		omap_mcbsp_spi_master_recv_word_poll(OMAP_MCBSP2, (u32*)(short_buffer + i));
++        for (i = 0 ; i < r_length ; i++) {
++                u32 tmp;
++                omap_mcbsp_spi_master_recv_word_poll(OMAP_MCBSP2, &tmp);
++                /* Assume little endian byte order */
++                buffer[i * 2 + 0] = tmp & 0xFF;
++                buffer[i * 2 + 1] = (tmp >> 8) & 0xFF;
++        }
+ 
+ 	SPI_CS_OFF();
+ 	return 0;
+@@ -285,24 +292,22 @@
+ int cx3110x_spi_write(struct net_device *dev, unsigned long address, unsigned char * buffer, unsigned int length)
+ {
+ 	int i;
+-	u16 * short_buffer = (u16 *) buffer;
+ 	unsigned int w_length = length >> 1;
+ 
+-
+ 	DEBUG(DBG_SPI_IO, "omap_wlan_spi_write (%d bytes @ 0x%lx)\n", length, address << 8);
+ 
+ 	SPI_CS_ON();
+ 
+ 	omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, address << 8);
+ 	
+-	for (i = 0 ; i < w_length ; i++)
+-		omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, short_buffer[i]); 
++        for (i = 0 ; i < w_length ; i++) {
++                /* Assume little endian byte order */
++                omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, (u32)buffer[i * 2] | ((u32)buffer[i * 2 + 1] << 8));
++        }
+ 
+ 	/* UMAC may send us odd number of bytes long frames */
+ 	if (length % 2) {
+-		u16 last_word;
+-
+-		last_word = buffer[length - 1];
++                u16 last_word = buffer[length - 1];
+ 		omap_mcbsp_spi_master_xmit_word_poll(OMAP_MCBSP2, last_word); 
+ 	}
+ 
+@@ -366,6 +371,9 @@
+ 	while(rate_mhz/div >= max_mhz)
+ 		div++;
+ 		
++        printk("McBSP2: freq_limit=%dMHz, base_freq=%dMHz, divisor=%d (%d.%dMHz)\n",
++                max_mhz, rate_mhz, div, rate_mhz / div, (rate_mhz * 10 / div) % 10);
++
+ 	spi_dma.dma_tx_done = 0;
+ 	spi_dma.dma_rx_done = 0;
+ 	
diff --git a/packages/mamona/cx3110x-770he-0.8.1/fix_mem_corruption.patch b/packages/mamona/cx3110x-770he-0.8.1/fix_mem_corruption.patch
new file mode 100644
index 0000000000..ae3e87f427
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/fix_mem_corruption.patch
@@ -0,0 +1,53 @@
+Index: cx3110x-0.8.1/src/sm_drv_spi_io.c
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_spi_io.c	2007-10-15 08:56:20.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_spi_io.c	2008-04-22 14:53:49.000000000 -0300
+@@ -91,7 +91,7 @@
+ 	int dma_tx_done;
+ 	int dma_rx_done;
+ 	
+-	uint16_t recv_buffer;
++	uint16_t *recv_buffer;
+ };
+ 
+ static struct omap_wlan_spi_dma spi_dma;
+@@ -142,7 +142,7 @@
+ 	omap_set_dma_src_params(spi_dma.dma_tx_ch,
+ 				OMAP_DMA_PORT_EMIFF,
+ 				OMAP_DMA_AMODE_CONSTANT,
+-				virt_to_phys(&spi_dma.recv_buffer),
++				virt_to_phys(spi_dma.recv_buffer),
+ 				0, 0);
+ 
+ 	/* Prepare for reading */
+@@ -208,7 +208,7 @@
+ 	omap_set_dma_dest_params(spi_dma.dma_rx_ch,
+ 				 OMAP_DMA_PORT_EMIFF,
+ 				 OMAP_DMA_AMODE_CONSTANT,
+-				 virt_to_phys(&spi_dma.recv_buffer),
++				 virt_to_phys(spi_dma.recv_buffer),
+ 				 0, 0);
+ 
+ 
+@@ -319,6 +319,12 @@
+ 	struct net_local * lp;
+ 	struct spi_hif_local_data * spi_lp;
+ 
++        spi_dma.recv_buffer = kmalloc(sizeof(*spi_dma.recv_buffer), GFP_ATOMIC);
++        if (!spi_dma.recv_buffer) {
++                printk("spi_dma.recv_buffer allocation failed\n");
++                return -1;
++        }
++
+ 	lp = dev->priv;
+ 	spi_lp = HIF_LP(lp);
+ 
+@@ -411,6 +417,8 @@
+ 	omap_free_gpio(wlan_config->irq_gpio);
+ 	omap_free_dma(spi_dma.dma_tx_ch);
+ 	omap_free_dma(spi_dma.dma_rx_ch);
++
++        kfree(spi_dma.recv_buffer);
+ }
+ 
+ 
diff --git a/packages/mamona/cx3110x-770he-0.8.1/fix_ssid_data_length.patch b/packages/mamona/cx3110x-770he-0.8.1/fix_ssid_data_length.patch
new file mode 100644
index 0000000000..a9e36ce6dd
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/fix_ssid_data_length.patch
@@ -0,0 +1,13 @@
+Index: cx3110x-0.8.1/src/sm_drv_ioctl_umac.c
+===================================================================
+--- cx3110x-0.8.1.orig/src/sm_drv_ioctl_umac.c	2008-04-28 15:59:37.000000000 -0300
++++ cx3110x-0.8.1/src/sm_drv_ioctl_umac.c	2008-04-28 15:59:57.000000000 -0300
+@@ -171,7 +171,7 @@
+ 	/* The following entries will be displayed in the same order we give them */
+ 
+ 	/* The ESSID. */
+-	iwe.u.data.length = strlen(bss->ssid);
++	iwe.u.data.length = strlen(bss->ssid + 1);
+ 	iwe.u.data.flags = 1;
+ 	iwe.cmd = SIOCGIWESSID;
+ 	current_ev = iwe_stream_add_point(current_ev, end_buf,
diff --git a/packages/mamona/cx3110x-770he-0.8.1/series b/packages/mamona/cx3110x-770he-0.8.1/series
new file mode 100644
index 0000000000..fa690cb729
--- /dev/null
+++ b/packages/mamona/cx3110x-770he-0.8.1/series
@@ -0,0 +1,7 @@
+fix_mem_corruption.patch
+fix_mem_allign.patch
+cx3110x.patch
+fix_cross_makefile.patch
+fix_ssid_data_length.patch
+770_performance_improvements.patch
+create_sysfs_link_for_wlan0.patch