merge of '8f81066c1bea85c3191ff30a0d721cd1a3ccc041'

     and '98ff999fc95d5b6c4cf5fd58a2c502aea38ea350'

4 files changed, 991 insertions, 33 deletions

diff --git a/packages/linux/linux-efika/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt b/packages/linux/linux-efika/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt
new file mode 100644
index 0000000000..a352f0e2f5
--- /dev/null
+++ b/packages/linux/linux-efika/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt
@@ -0,0 +1,834 @@
+I cleaned up the setting of the port_config register on the MPC5200B.
+This driver now touches only the two relevant bits without overriding
+the others.
+
+Signed-off-by: Leon Woestenberg <leonw@mailcan.com>
+
+From 144658ad3d23bb426e29562235e40f0f9797a9c7 Mon Sep 17 00:00:00 2001
+From: Sylvain Munaut <tnt@246tNt.com>
+Date: Mon, 18 Dec 2006 22:51:38 +0100
+Subject: [PATCH] sound: Add support for the MPC52xx PSC AC97 Link
+
+Messy driver, to be cleaned ... a lot ...
+
+Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
+---
+ include/asm-ppc/mpc52xx_psc.h |   10 -
+ sound/ppc/Kconfig             |   16 +
+ sound/ppc/Makefile            |    3 
+ sound/ppc/mpc52xx_ac97.c      |  738 +++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 765 insertions(+), 2 deletions(-)
+
+Index: linux-2.6.19-rc6_efika/include/asm-ppc/mpc52xx_psc.h
+===================================================================
+--- linux-2.6.19-rc6_efika.orig/include/asm-ppc/mpc52xx_psc.h	2007-01-14 19:45:07.000000000 +0100
++++ linux-2.6.19-rc6_efika/include/asm-ppc/mpc52xx_psc.h	2007-01-14 19:45:07.000000000 +0100
+@@ -28,6 +28,10 @@
+ #define MPC52xx_PSC_MAXNUM	6
+ 
+ /* Programmable Serial Controller (PSC) status register bits */
++#define MPC52xx_PSC_SR_UNEX_RX	0x0001
++#define MPC52xx_PSC_SR_DATA_VAL	0x0002
++#define MPC52xx_PSC_SR_DATA_OVR	0x0004
++#define MPC52xx_PSC_SR_CMDSEND	0x0008
+ #define MPC52xx_PSC_SR_CDE	0x0080
+ #define MPC52xx_PSC_SR_RXRDY	0x0100
+ #define MPC52xx_PSC_SR_RXFULL	0x0200
+@@ -132,8 +136,10 @@
+ 	u8		reserved5[3];
+ 	u8		ctlr;		/* PSC + 0x1c */
+ 	u8		reserved6[3];
+-	u16		ccr;		/* PSC + 0x20 */
+-	u8		reserved7[14];
++	u32		ccr;		/* PSC + 0x20 */
++	u32		ac97_slots;	/* PSC + 0x24 */
++	u32		ac97_cmd;	/* PSC + 0x28 */
++	u32		ac97_data;	/* PSC + 0x2c */
+ 	u8		ivr;		/* PSC + 0x30 */
+ 	u8		reserved8[3];
+ 	u8		ip;		/* PSC + 0x34 */
+Index: linux-2.6.19-rc6_efika/sound/ppc/Kconfig
+===================================================================
+--- linux-2.6.19-rc6_efika.orig/sound/ppc/Kconfig	2007-01-14 19:45:07.000000000 +0100
++++ linux-2.6.19-rc6_efika/sound/ppc/Kconfig	2007-01-14 19:45:07.000000000 +0100
+@@ -33,3 +33,19 @@
+ 	  option.
+ 
+ endmenu
++
++
++# ALSA ppc drivers
++
++menu "ALSA PPC devices"
++	depends on SND!=n && PPC
++
++config SND_PPC_MPC52xx_AC97
++	tristate "Freescale MPC52xx AC97 interface support"
++	depends on SND && PPC_MPC52xx
++	select SND_AC97_CODEC
++	help
++	  Say Y or M if you want to support any AC97 codec attached to
++	  the Freescqle MPC52xx AC97 interface.
++
++endmenu
+Index: linux-2.6.19-rc6_efika/sound/ppc/Makefile
+===================================================================
+--- linux-2.6.19-rc6_efika.orig/sound/ppc/Makefile	2007-01-14 19:45:07.000000000 +0100
++++ linux-2.6.19-rc6_efika/sound/ppc/Makefile	2007-01-14 19:45:07.000000000 +0100
+@@ -4,6 +4,9 @@
+ #
+ 
+ snd-powermac-objs := powermac.o pmac.o awacs.o burgundy.o daca.o tumbler.o keywest.o beep.o
++snd-mpc52xx-ac97-objs := mpc52xx_ac97.o
+ 
+ # Toplevel Module Dependency
+ obj-$(CONFIG_SND_POWERMAC) += snd-powermac.o
++
++obj-$(CONFIG_SND_PPC_MPC52xx_AC97)	+= snd-mpc52xx-ac97.o
+Index: linux-2.6.19-rc6_efika/sound/ppc/mpc52xx_ac97.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.19-rc6_efika/sound/ppc/mpc52xx_ac97.c	2007-01-14 22:45:55.000000000 +0100
+@@ -0,0 +1,742 @@
++/*
++ * Driver for the PSC of the Freescale MPC52xx configured as AC97 interface
++ *
++ *
++ * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#define DEBUG
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++
++#include <asm/of_platform.h>
++#include <asm/mpc52xx_psc.h>
++
++
++#define DRV_NAME "mpc52xx-psc-ac97"
++
++
++/* ======================================================================== */
++/* Structs / Defines                                                        */
++/* ======================================================================== */
++
++/* Private structure */
++struct mpc52xx_ac97_priv {
++	struct device *dev;
++	resource_size_t	mem_start;
++	resource_size_t mem_len;
++	int irq;
++	struct mpc52xx_psc __iomem *psc;
++	struct snd_card *card;
++	struct snd_pcm *pcm;
++	struct snd_ac97 *ac97;
++
++	struct snd_pcm_substream *substream_playback;
++	unsigned int buf_pos;
++};
++
++/* Register bit definition (AC97 mode specific) */
++#define PSC_AC97_SLOT_BIT(n)		(1<<(12-n))
++#define PSC_AC97_SLOTS_XMIT_SHIFT	16
++#define PSC_AC97_SLOTS_RECV_SHIFT	 0
++
++
++
++/* ======================================================================== */
++/* ISR routine                                                              */
++/* ======================================================================== */
++
++static irqreturn_t
++mpc52xx_ac97_irq(int irq, void *dev_id)
++{
++	struct mpc52xx_ac97_priv *priv = dev_id;
++
++	static int icnt = 0;
++	#if 0
++	{
++	unsigned int val;
++//	val = in_be32(&priv->psc->ac97_data);
++	printk(KERN_INFO "mpc52xx_ac97_irq fired (isr=%04x, status=%04x) %08x\n", in_be16(&priv->psc->mpc52xx_psc_imr), in_be16(&priv->psc->mpc52xx_psc_status), val);
++	out_8(&priv->psc->command,MPC52xx_PSC_RST_ERR_STAT);
++	}
++	#endif
++
++	/* Anti Crash during dev ;) */
++	#if 0
++	if ((icnt++) > 50000)
++		out_be16(&priv->psc->mpc52xx_psc_imr, 0);
++	#endif
++
++	/* Copy 64 data into the buffer */
++	if (in_be16(&priv->psc->mpc52xx_psc_imr) & 0x0100) {
++		if (priv->substream_playback) {
++			struct snd_pcm_runtime *rt;
++
++			rt = priv->substream_playback->runtime;
++
++			if (snd_pcm_playback_hw_avail(rt) < bytes_to_frames(rt,128)) {
++				int i;
++				/* Push silence */
++				for (i=0; i<64; i++)
++					out_be32(&priv->psc->mpc52xx_psc_buffer_32, 0x00000800);
++				printk(KERN_DEBUG "pushed silence ...\n");
++			} else {
++				int i;
++				unsigned short *data;
++
++				data = (unsigned short *)
++					(&rt->dma_area[frames_to_bytes(rt, priv->buf_pos)]);
++
++				for (i=0; i<64; i++)
++					out_be32(&priv->psc->mpc52xx_psc_buffer_32,
++						(((unsigned int)data[i]) << 16) | 0x00000000);
++							/* Setting the sof bit looks useless */
++
++				priv->buf_pos += bytes_to_frames(rt,128);;
++				if (priv->buf_pos >= rt->buffer_size)
++					priv->buf_pos = 0;
++
++				snd_pcm_period_elapsed(priv->substream_playback);
++			}
++		} else {
++			out_be16(&priv->psc->mpc52xx_psc_imr, 0);
++			printk(KERN_DEBUG "Interrupt with no stream ...\n");
++		}
++	} else {
++		printk(KERN_ERR "Spurious int\n");
++	}
++
++	return IRQ_HANDLED;
++}
++
++
++/* ======================================================================== */
++/* PCM interface                                                            */
++/* ======================================================================== */
++
++/* HW desc */
++
++static struct snd_pcm_hardware mpc52xx_ac97_hw = {
++	.info			= SNDRV_PCM_INFO_INTERLEAVED		|
++					SNDRV_PCM_INFO_MMAP		|
++					SNDRV_PCM_INFO_MMAP_VALID,
++	.formats		= SNDRV_PCM_FMTBIT_S16_BE,
++	.rates			= SNDRV_PCM_RATE_8000_48000,
++	.rate_min		= 8000,
++	.rate_max		= 48000,
++	.channels_min		= 1,
++	.channels_max		= 2,	/* Support for more ? */
++	.buffer_bytes_max	= 128*1024,
++	.period_bytes_min	= 128, /* 32, */
++	.period_bytes_max	= 128, /* 16*1024, */
++	.periods_min		= 8,
++	.periods_max		= 256,
++	.fifo_size		= 512,
++};
++
++
++/* Playback */
++
++static int
++mpc52xx_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++
++	dev_dbg(priv->dev, "mpc52xx_ac97_playback_open(%p)\n", substream);
++
++	substream->runtime->hw = mpc52xx_ac97_hw;
++
++	priv->substream_playback = substream;
++	priv->buf_pos = 0;	/* FIXME Do that where ? */
++
++	return 0;	/* FIXME */
++}
++
++static int
++mpc52xx_ac97_playback_close(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++	dev_dbg(priv->dev, "mpc52xx_ac97_playback_close(%p)\n", substream);
++	priv->substream_playback = NULL;
++	return 0;	/* FIXME */
++}
++
++static int
++mpc52xx_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++
++	dev_dbg(priv->dev, "mpc52xx_ac97_playback_prepare(%p)\n", substream);
++
++	/* FIXME, need a spinlock to protect access */
++	if (substream->runtime->channels == 1)
++		out_be32(&priv->psc->ac97_slots, 0x01000000);
++	else
++		out_be32(&priv->psc->ac97_slots, 0x03000000);
++
++	snd_ac97_set_rate(priv->ac97, AC97_PCM_FRONT_DAC_RATE, substream->runtime->rate);
++
++	return 0;	/* FIXME */
++}
++
++
++/* Capture */
++
++static int
++mpc52xx_ac97_capture_open(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++	return 0;	/* FIXME */
++}
++
++static int
++mpc52xx_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++	return 0;	/* FIXME */
++}
++
++static int
++mpc52xx_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++	return 0;	/* FIXME */
++}
++
++
++/* Common */
++
++static int
++mpc52xx_ac97_hw_params(struct snd_pcm_substream *substream,
++			struct snd_pcm_hw_params *params)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++	int rv;
++
++	dev_dbg(priv->dev, "mpc52xx_ac97_hw_params(%p)\n", substream);
++
++	rv = snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(params));
++	if (rv < 0) {
++		printk(KERN_ERR "hw params failes\n");	/* FIXME */
++		return rv;
++	}
++
++	printk(KERN_DEBUG "%d %d %d\n", params_buffer_bytes(params), params_period_bytes(params), params_periods(params));
++
++
++	return 0;
++}
++
++static int
++mpc52xx_ac97_hw_free(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++
++	dev_dbg(priv->dev, "mpc52xx_ac97_hw_free(%p)\n", substream);
++
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int
++mpc52xx_ac97_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++	int rv = 0;
++
++	dev_dbg(priv->dev, "mpc52xx_ac97_trigger(%p,%d)\n", substream, cmd);
++
++	switch (cmd) {
++		case SNDRV_PCM_TRIGGER_START:
++			/* Enable TX interrupt */
++			out_be16(&priv->psc->mpc52xx_psc_imr, 0x0100); // 0x0100
++
++			break;
++
++		case SNDRV_PCM_TRIGGER_STOP:
++			/* Disable TX interrupt */
++			out_be16(&priv->psc->mpc52xx_psc_imr, 0x0000);
++
++			break;
++
++		default:
++			rv = -EINVAL;
++	}
++
++	/* FIXME */
++	return rv;
++}
++
++static snd_pcm_uframes_t
++mpc52xx_ac97_pointer(struct snd_pcm_substream *substream)
++{
++	struct mpc52xx_ac97_priv *priv = substream->pcm->private_data;
++
++//	dev_dbg(priv->dev, "mpc52xx_ac97_pointer(%p)\n", substream);
++
++	if (substream->runtime->channels == 1)
++		return priv->buf_pos;	/* FIXME */
++	else
++		return priv->buf_pos >> 1;	/* FIXME */
++}
++
++
++/* Ops */
++
++static struct snd_pcm_ops mpc52xx_ac97_playback_ops = {
++	.open		= mpc52xx_ac97_playback_open,
++	.close		= mpc52xx_ac97_playback_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= mpc52xx_ac97_hw_params,
++	.hw_free	= mpc52xx_ac97_hw_free,
++	.prepare	= mpc52xx_ac97_playback_prepare,
++	.trigger	= mpc52xx_ac97_trigger,
++	.pointer	= mpc52xx_ac97_pointer,
++};
++
++static struct snd_pcm_ops mpc52xx_ac97_capture_ops = {
++	.open		= mpc52xx_ac97_capture_open,
++	.close		= mpc52xx_ac97_capture_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= mpc52xx_ac97_hw_params,
++	.hw_free	= mpc52xx_ac97_hw_free,
++	.prepare	= mpc52xx_ac97_capture_prepare,
++	.trigger	= mpc52xx_ac97_trigger,
++	.pointer	= mpc52xx_ac97_pointer,
++};
++
++
++/* ======================================================================== */
++/* AC97 Bus interface                                                       */
++/* ======================================================================== */
++
++static unsigned short
++mpc52xx_ac97_bus_read(struct snd_ac97 *ac97, unsigned short reg)
++{
++	struct mpc52xx_ac97_priv *priv = ac97->private_data;
++	int timeout;
++	unsigned int val;
++
++	dev_dbg(priv->dev, "ac97 read: reg %04x\n", reg);
++
++	/* Wait for it to be ready */
++	timeout = 1000;
++	while ((--timeout) && (in_be16(&priv->psc->mpc52xx_psc_status) &
++						MPC52xx_PSC_SR_CMDSEND) )
++		udelay(10);
++
++	if (!timeout) {
++		printk(KERN_ERR DRV_NAME ": timeout on ac97 bus (rdy)\n");
++		return 0xffff;
++	}
++
++	/* Do the read */
++	out_be32(&priv->psc->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
++
++	/* Wait for the answer */
++	timeout = 1000;
++	while ((--timeout) && !(in_be16(&priv->psc->mpc52xx_psc_status) &
++						MPC52xx_PSC_SR_DATA_VAL) )
++		udelay(10);
++
++	if (!timeout) {
++		printk(KERN_ERR DRV_NAME ": timeout on ac97 read (val)\n");
++		return 0xffff;
++	}
++
++	/* Get the data */
++	val = in_be32(&priv->psc->ac97_data);
++	if ( ((val>>24) & 0x7f) != reg ) {
++		printk(KERN_ERR DRV_NAME ": reg echo error on ac97 read\n");
++		return 0xffff;
++	}
++	val = (val >> 8) & 0xffff;
++
++	dev_dbg(priv->dev, "ac97 read ok: reg %04x  val %04x\n",
++				reg, val);
++
++	return (unsigned short) val;
++}
++
++static void
++mpc52xx_ac97_bus_write(struct snd_ac97 *ac97,
++			unsigned short reg, unsigned short val)
++{
++	struct mpc52xx_ac97_priv *priv = ac97->private_data;
++	int timeout;
++
++	dev_dbg(priv->dev, "ac97 write: reg %04x  val %04x\n",
++				reg, val);
++
++	/* Wait for it to be ready */
++	timeout = 1000;
++	while ((--timeout) && (in_be16(&priv->psc->mpc52xx_psc_status) &
++						MPC52xx_PSC_SR_CMDSEND) )
++		udelay(10);
++
++	if (!timeout) {
++		printk(KERN_ERR DRV_NAME ": timeout on ac97 write\n");
++		return;
++	}
++
++	/* Write data */
++	out_be32(&priv->psc->ac97_cmd, ((reg & 0x7f) << 24) | (val << 8));
++}
++
++static void
++mpc52xx_ac97_bus_reset(struct snd_ac97 *ac97)
++{
++	struct mpc52xx_ac97_priv *priv = ac97->private_data;
++
++	dev_dbg(priv->dev, "ac97 codec reset\n");
++
++	/* Do a cold reset */
++	out_8(&priv->psc->op1, 0x03);
++	udelay(10);
++	out_8(&priv->psc->op0, 0x02);
++	udelay(50);
++
++	/* PSC recover from cold reset (cfr user manual, not sure if useful) */
++	out_be32(&priv->psc->sicr, in_be32(&priv->psc->sicr));
++}
++
++
++static struct snd_ac97_bus_ops mpc52xx_ac97_bus_ops = {
++	.read	= mpc52xx_ac97_bus_read,
++	.write	= mpc52xx_ac97_bus_write,
++	.reset	= mpc52xx_ac97_bus_reset,
++};
++
++
++/* ======================================================================== */
++/* Sound driver setup                                                       */
++/* ======================================================================== */
++
++static int
++mpc52xx_ac97_setup_pcm(struct mpc52xx_ac97_priv *priv)
++{
++	int rv;
++
++	rv = snd_pcm_new(priv->card, DRV_NAME "-pcm", 0, 1, 1, &priv->pcm);
++	if (rv) {
++		printk(KERN_ERR DRV_NAME ": snd_pcm_new failed\n");
++		return rv;
++	}
++
++	rv = snd_pcm_lib_preallocate_pages_for_all(priv->pcm,
++		SNDRV_DMA_TYPE_CONTINUOUS, snd_dma_continuous_data(GFP_KERNEL),
++		128*1024, 128*1024);
++	if (rv) {
++		printk(KERN_ERR DRV_NAME
++			": snd_pcm_lib_preallocate_pages_for_all  failed\n");
++		return rv;
++	}
++
++	snd_pcm_set_ops(priv->pcm, SNDRV_PCM_STREAM_PLAYBACK,
++			&mpc52xx_ac97_playback_ops);
++	snd_pcm_set_ops(priv->pcm, SNDRV_PCM_STREAM_CAPTURE,
++			&mpc52xx_ac97_capture_ops);
++
++	priv->pcm->private_data = priv;
++	priv->pcm->info_flags = 0;
++
++	strcpy(priv->pcm->name, "Freescale MPC52xx PSC-AC97 PCM");
++
++	return 0;
++}
++
++static int
++mpc52xx_ac97_setup_mixer(struct mpc52xx_ac97_priv *priv)
++{
++	struct snd_ac97_bus *ac97_bus;
++	struct snd_ac97_template ac97_template;
++	int rv;
++
++	rv = snd_ac97_bus(priv->card, 0, &mpc52xx_ac97_bus_ops, NULL, &ac97_bus);
++	if (rv) {
++		printk(KERN_ERR DRV_NAME ": snd_ac97_bus failed\n");
++		return rv;
++	}
++
++	memset(&ac97_template, 0, sizeof(struct snd_ac97_template));
++	ac97_template.private_data = priv;
++
++	rv = snd_ac97_mixer(ac97_bus, &ac97_template, &priv->ac97);
++	if (rv) {
++		printk(KERN_ERR DRV_NAME ": snd_ac97_mixer failed\n");
++		return rv;
++	}
++
++	return 0;
++}
++
++
++static int
++mpc52xx_ac97_hwinit(struct mpc52xx_ac97_priv *priv)
++{
++	/* Reset everything first by safety */
++	out_8(&priv->psc->command,MPC52xx_PSC_RST_RX);
++	out_8(&priv->psc->command,MPC52xx_PSC_RST_TX);
++	out_8(&priv->psc->command,MPC52xx_PSC_RST_ERR_STAT);
++
++	/* Do a cold reset of codec */
++	out_8(&priv->psc->op1, 0x03);
++	udelay(10);
++	out_8(&priv->psc->op0, 0x02);
++	udelay(50);
++
++	/* Configure AC97 enhanced mode */
++	out_be32(&priv->psc->sicr, 0x03010000);
++
++	/* No slots active */
++	out_be32(&priv->psc->ac97_slots, 0x00000000);
++
++	/* No IRQ */
++	out_be16(&priv->psc->mpc52xx_psc_imr, 0x0000);
++
++	/* FIFO levels */
++	out_8(&priv->psc->rfcntl, 0x07);
++	out_8(&priv->psc->tfcntl, 0x07);
++	out_be16(&priv->psc->rfalarm, 0x80);
++	out_be16(&priv->psc->tfalarm, 0x80);
++
++	/* Go */
++	out_8(&priv->psc->command,MPC52xx_PSC_TX_ENABLE);
++	out_8(&priv->psc->command,MPC52xx_PSC_RX_ENABLE);
++
++	return 0;
++}
++
++static int
++mpc52xx_ac97_hwshutdown(struct mpc52xx_ac97_priv *priv)
++{
++	/* No IRQ */
++	out_be16(&priv->psc->mpc52xx_psc_imr, 0x0000);
++
++	/* Disable TB & RX */
++	out_8(&priv->psc->command,MPC52xx_PSC_RST_RX);
++	out_8(&priv->psc->command,MPC52xx_PSC_RST_TX);
++
++	/* FIXME : Reset or put codec in low power ? */
++
++	return 0;
++}
++
++
++/* ======================================================================== */
++/* OF Platform Driver                                                       */
++/* ======================================================================== */
++
++static int __devinit
++mpc52xx_ac97_probe(struct of_device *op, const struct of_device_id *match)
++{
++	struct device_node *dn = op->node;
++	struct mpc52xx_ac97_priv *priv;
++	struct snd_card *card;
++	struct resource res;
++	int rv;
++
++	dev_dbg(&op->dev, "probing MPC52xx PSC AC97 driver\n");
++
++	/* Get card structure */
++	rv = -ENOMEM;
++	card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++				THIS_MODULE, sizeof(struct mpc52xx_ac97_priv));
++	if (!card)
++		goto err_early;
++
++	priv = card->private_data;
++
++	/* Init our private structure */
++	priv->card = card;
++	priv->dev = &op->dev;
++
++	/* Get resources (mem,irq,...) */
++	rv = of_address_to_resource(dn, 0, &res);
++	if (rv)
++		goto err_early;
++
++	priv->mem_start = res.start;
++	priv->mem_len = res.end - res.start + 1;
++
++	if (!request_mem_region(priv->mem_start, priv->mem_len, DRV_NAME)) {
++		printk(KERN_ERR DRV_NAME ": request_mem_region failed\n");
++		rv = -EBUSY;
++		goto err_early;
++	}
++
++	priv->psc = ioremap(priv->mem_start, priv->mem_len);
++	if (!priv->psc) {
++		printk(KERN_ERR DRV_NAME ": ioremap failed\n");
++		rv = -ENOMEM;
++		goto err_iomap;
++	}
++
++	priv->irq = irq_of_parse_and_map(dn, 0);
++	if (priv->irq == NO_IRQ) {
++		printk(KERN_ERR DRV_NAME ": irq_of_parse_and_map failed\n");
++		rv = -EBUSY;
++		goto err_irqmap;
++	}
++
++	/* Low level HW Init */
++	mpc52xx_ac97_hwinit(priv);
++
++	/* Request IRQ now that we're 'stable' */
++	rv = request_irq(priv->irq, mpc52xx_ac97_irq, 0, DRV_NAME, priv);
++	if (rv < 0) {
++		printk(KERN_ERR DRV_NAME ": request_irq failed\n");
++		goto err_irqreq;
++	}
++
++	/* Prepare sound stuff */
++	rv = mpc52xx_ac97_setup_mixer(priv);
++	if (rv)
++		goto err_late;
++
++	rv = mpc52xx_ac97_setup_pcm(priv);
++	if (rv)
++		goto err_late;
++
++	/* Finally register the card */
++	snprintf(card->shortname, sizeof(card->shortname), DRV_NAME);
++	snprintf(card->longname, sizeof(card->longname),
++		"Freescale MPC52xx PSC-AC97 (%s)", card->mixername);
++
++	rv = snd_card_register(card);
++	if (rv) {
++		printk(KERN_ERR DRV_NAME ": snd_card_register failed\n");
++		goto err_late;
++	}
++
++	dev_set_drvdata(&op->dev, priv);
++
++	return 0;
++
++err_late:
++	free_irq(priv->irq, priv);
++err_irqreq:
++	mpc52xx_ac97_hwshutdown(priv);
++	irq_dispose_mapping(priv->irq);
++err_irqmap:
++	iounmap(priv->psc);
++err_iomap:
++	release_mem_region(priv->mem_start, priv->mem_len);
++err_early:
++	if (card)
++		snd_card_free(card);
++	return rv;
++}
++
++static int
++mpc52xx_ac97_remove(struct of_device *op)
++{
++	struct mpc52xx_ac97_priv *priv;
++
++	dev_dbg(&op->dev, "removing MPC52xx PSC AC97 driver\n");
++
++	priv = dev_get_drvdata(&op->dev);
++	if (priv) {
++		/* Sound subsys shutdown */
++		snd_card_free(priv->card);
++
++		/* Low level HW shutdown */
++		mpc52xx_ac97_hwshutdown(priv);
++
++		/* Release resources */
++		iounmap(priv->psc);
++		free_irq(priv->irq, priv);
++		irq_dispose_mapping(priv->irq);
++		release_mem_region(priv->mem_start, priv->mem_len);
++	}
++
++	dev_set_drvdata(&op->dev, NULL);
++
++	return 0;
++}
++
++
++static struct of_device_id mpc52xx_ac97_of_match[] = {
++	{
++/*		.type		= "ac97",	FIXME Efika ... */
++		.compatible	= "mpc5200b-psc-ac97",	/* B only for now */
++	},
++};
++/* Prevent autoload during developpment phase ... */
++/* MODULE_DEVICE_TABLE(of, mpc52xx_ac97_of_match); */
++
++
++static struct of_platform_driver mpc52xx_ac97_of_driver = {
++	.owner		= THIS_MODULE,
++	.name		= DRV_NAME,
++	.match_table	= mpc52xx_ac97_of_match,
++	.probe		= mpc52xx_ac97_probe,
++	.remove		= mpc52xx_ac97_remove,
++	.driver		= {
++		.name	= DRV_NAME,
++	},
++};
++
++
++/* ======================================================================== */
++/* Module                                                                   */
++/* ======================================================================== */
++
++static int __init
++mpc52xx_ac97_init(void)
++{
++	int rv;
++
++	/* Set port_config bits[25:26] to 01, keep the others as-is. This
++     sets PSC2 to AC97 mode. */
++	{
++		void *mbar;
++    u32 port_config;
++		mbar = ioremap(0xf0000000, 0x100000);
++    port_config = in_be32(mbar + 0xb00);
++		printk(KERN_INFO "port_config was: %08x\n", port_config);
++    port_config &= ~0x00000060;
++    port_config |=  0x00000020;
++		out_be32(mbar + 0xb00, port_config);
++		printk(KERN_INFO "port_config now: %08x\n", port_config);
++		iounmap(mbar);
++	}
++
++	printk(KERN_INFO "Sound: MPC52xx PSC AC97 driver\n");
++
++	rv = of_register_platform_driver(&mpc52xx_ac97_of_driver);
++	if (rv) {
++		printk(KERN_ERR DRV_NAME ": "
++			"of_register_platform_driver failed (%i)\n", rv);
++		return rv;
++	}
++
++	return 0;
++}
++
++static void __exit
++mpc52xx_ac97_exit(void)
++{
++	of_unregister_platform_driver(&mpc52xx_ac97_of_driver);
++}
++
++module_init(mpc52xx_ac97_init);
++module_exit(mpc52xx_ac97_exit);
++
++MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
++MODULE_DESCRIPTION(DRV_NAME ": Freescale MPC52xx PSC AC97 driver");
++MODULE_LICENSE("GPL");
++
diff --git a/packages/linux/linux-efika/defconfig b/packages/linux/linux-efika/defconfig
index 05a06b6c5e..b8a39ffa05 100644
--- a/packages/linux/linux-efika/defconfig
+++ b/packages/linux/linux-efika/defconfig
@@ -1827,7 +1827,7 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="iso8859-1"
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
diff --git a/packages/linux/linux-efika_2.6.18+2.6.19-rc6.bb b/packages/linux/linux-efika_2.6.18+2.6.19-rc6.bb
index 679bd667d5..fec05ad168 100644
--- a/packages/linux/linux-efika_2.6.18+2.6.19-rc6.bb
+++ b/packages/linux/linux-efika_2.6.18+2.6.19-rc6.bb
@@ -1,15 +1,16 @@
 DESCRIPTION = "Linux Kernel for the EFIKA dev platform"
 SECTION = "kernel"
 LICENSE = "GPL"
-PR = "r1"
+PR = "r2"
 
 COMPATIBLE_MACHINE = "efika"
 
 SRC_URI = "http://www.efika.de/download/linux-2.6.19-rc6_efika.tgz \
-           http://www.246tnt.com/files/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt;patch=1 \
+           file://0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt;patch=1 \
            http://www.246tnt.com/files/0001-powerpc-Add-device-tree-fixup-for-the-EFIKA.txt;patch=1 \
            file://defconfig \
 		   "
+#	http://www.246tnt.com/files/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt;patch=1 \
 #           http://lkml.org/lkml/2006/11/29/335;patch=1 \
 
 S = "${WORKDIR}/linux-2.6.19-rc6_efika"
diff --git a/packages/linux/linux-handhelds-2.6/rx3000/defconfig b/packages/linux/linux-handhelds-2.6/rx3000/defconfig
index 3d915d7f8f..35ae57e8ac 100644
--- a/packages/linux/linux-handhelds-2.6/rx3000/defconfig
+++ b/packages/linux/linux-handhelds-2.6/rx3000/defconfig
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-hh1
-# Wed Nov 29 21:13:14 2006
+# Linux kernel version: 2.6.19-hh4
+# Sat Dec 16 17:40:31 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -28,9 +30,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 # CONFIG_MINIMAL_OOPS is not set
@@ -38,9 +42,10 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-CONFIG_SYSCTL=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -73,6 +78,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -105,7 +111,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -125,9 +132,11 @@ CONFIG_ARCH_S3C2410=y
 #
 # S3C24XX Implementations
 #
+# CONFIG_MACH_AML_M5900 is not set
 # CONFIG_MACH_ANUBIS is not set
 # CONFIG_MACH_OSIRIS is not set
 # CONFIG_ARCH_BAST is not set
+CONFIG_PM_H1940=y
 # CONFIG_ARCH_H1940 is not set
 # CONFIG_MACH_N30 is not set
 # CONFIG_ARCH_SMDK2410 is not set
@@ -135,9 +144,14 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_MACH_SMDK2413 is not set
 # CONFIG_MACH_VR1000 is not set
 CONFIG_MACH_RX3715=y
+CONFIG_RX3715_LEDS=m
+CONFIG_RX3715_BLUETOOTH=m
+CONFIG_RX3715_DS1WM=m
 # CONFIG_MACH_OTOM is not set
 # CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_MACH_VSTMS is not set
 CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2410_PM=y
 CONFIG_CPU_S3C244X=y
 CONFIG_CPU_S3C2440=y
 
@@ -172,6 +186,8 @@ CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -225,9 +241,9 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 # Boot options
 #
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/mmcblk0p2"
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -255,6 +271,8 @@ CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
 CONFIG_PM_LEGACY=y
 CONFIG_PM_DEBUG=y
+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 CONFIG_APM=y
 
 #
@@ -271,6 +289,7 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -289,10 +308,12 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 
 #
 # IP: Virtual Server Configuration
@@ -389,7 +410,7 @@ CONFIG_IRDA_FAST_RR=y
 #
 # SIR device drivers
 #
-CONFIG_IRTTY_SIR=y
+CONFIG_IRTTY_SIR=m
 
 #
 # Dongle support
@@ -421,11 +442,12 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
+CONFIG_BT_HCIUART_BCSP=y
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -465,6 +487,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -560,6 +583,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -612,7 +641,17 @@ CONFIG_NETDEVICES=y
 #
 # Wireless LAN (non-hamradio)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_HOSTAP is not set
+CONFIG_ACX=m
+CONFIG_ACX_MEM=y
+CONFIG_ACX_RX3715=m
 
 #
 # Wan interfaces
@@ -628,6 +667,7 @@ CONFIG_PPP_BSDCOMP=y
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=y
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -642,12 +682,13 @@ CONFIG_PPP_BSDCOMP=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
@@ -666,19 +707,24 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_GPIO_KEYS=y
 CONFIG_KEYBOARD_ASIC3=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_NAVPOINT is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9712 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -732,7 +778,6 @@ CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_S3C2410_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -745,13 +790,12 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_CHARDEV=y
 
 #
 # I2C Algorithms
@@ -783,7 +827,7 @@ CONFIG_I2C_S3C2410=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
-CONFIG_I2C_DEBUG_BUS=y
+# CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
@@ -817,7 +861,12 @@ CONFIG_W1_DS2760=m
 #
 # CONFIG_HWMON is not set
 # CONFIG_HWMON_VID is not set
-CONFIG_BATTERY_MONITOR=y
+
+#
+# Hardware Monitoring - Battery
+#
+CONFIG_BATTERY_MONITOR=m
+CONFIG_RX3715_BATTERY=m
 
 #
 # L3 serial bus support
@@ -834,6 +883,7 @@ CONFIG_BATTERY_MONITOR=y
 # CONFIG_HTC_ASIC2 is not set
 CONFIG_HTC_ASIC3=y
 # CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
 
 #
 # Misc devices
@@ -843,6 +893,8 @@ CONFIG_HTC_ASIC3=y
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP is not set
+# CONFIG_ADC_ADS7846_SSP is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -854,21 +906,21 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 # CONFIG_LEDS_S3C24XX is not set
-# CONFIG_LEDS_ASIC3 is not set
+CONFIG_LEDS_ASIC3=y
 
 #
 # LED Triggers
 #
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_TIMER_ASIC3=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_SHARED is not set
+CONFIG_LEDS_TRIGGER_SHARED=y
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -892,6 +944,7 @@ CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
 
 #
 # Console display driver support
@@ -925,11 +978,56 @@ CONFIG_BACKLIGHT_DEVICE=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_S3C2410=y
 
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_RX3715=m
+CONFIG_SND_S3C2410=m
+# CONFIG_SND_S3C2410_DBG is not set
+# CONFIG_SND_S3C2410_DBG_DMA is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+CONFIG_SND_UDA1380=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 
 #
 # USB support
@@ -946,8 +1044,9 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # USB Gadget Support
 #
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -955,9 +1054,20 @@ CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_MQ11XX is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
 # CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_CHAR is not set
 
 #
 # MMC/SD Card support
@@ -965,6 +1075,7 @@ CONFIG_USB_GADGET=m
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_TIFM_SD is not set
 # CONFIG_MMC_TMIO is not set
 # CONFIG_MMC_SAMCOP is not set
 CONFIG_MMC_ASIC3=y
@@ -976,6 +1087,7 @@ CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -1009,10 +1121,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1044,8 +1158,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1082,7 +1198,8 @@ CONFIG_JFFS2_RTIME=y
 #
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1164,6 +1281,7 @@ CONFIG_OPROFILE=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -1171,7 +1289,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_S3C2410_UART=2
 
@@ -1185,6 +1303,9 @@ CONFIG_DEBUG_S3C2410_UART=2
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
@@ -1194,6 +1315,8 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set