merge of '3d4a85aa2c2724b95dcfd705b2078392bd5fe7fa'

     and 'd1aa63f3b61dcecf2e8e5a90f2243dc87573d0b7'

18 files changed, 5501 insertions, 9603 deletions

diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/dht-walnut_defconfig b/packages/linux/linux-dht-walnut-2.6.12.6/dht-walnut_defconfig
deleted file mode 100644
index be30ceb938..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12.6/dht-walnut_defconfig
+++ /dev/null
@@ -1,2024 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6
-# Thu Jun  8 14:36:36 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-CONFIG_WALNUT=y
-# CONFIG_XILINX_ML300 is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_TCIC=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-# CONFIG_NFTL_RW is not set
-CONFIG_INFTL=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_WALNUT=m
-CONFIG_MTD_PCI=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_BLKMTD=m
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-# CONFIG_CISS_SCSI_TAPE is not set
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_SL82C105=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CY82C693=m
-CONFIG_BLK_DEV_CS5520=m
-CONFIG_BLK_DEV_CS5530=m
-CONFIG_BLK_DEV_HPT34X=m
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=y
-# CONFIG_PDC202XX_BURST is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-# CONFIG_PDC202XX_FORCE is not set
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
-CONFIG_AIC79XX_DEBUG_ENABLE=y
-CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_DPT_I2O=m
-# CONFIG_MEGARAID_NEWGEN is not set
-CONFIG_MEGARAID_LEGACY=m
-# CONFIG_SCSI_SATA is not set
-CONFIG_SCSI_BUSLOGIC=m
-# CONFIG_SCSI_OMIT_FLASHPOINT is not set
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
-CONFIG_SCSI_DEBUG=m
-
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
-CONFIG_FUSION_CTL=m
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-
-#
-# Device Drivers
-#
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_SBP2_PHYS_DMA=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-CONFIG_X25=m
-CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
-CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_PCMCIA_XIRTULIP=m
-CONFIG_HP100=m
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=64
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-# CONFIG_AMD8111E_NAPI is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
-CONFIG_FORCEDETH=m
-CONFIG_DGRS=m
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-# CONFIG_R8169_NAPI is not set
-# CONFIG_R8169_VLAN is not set
-CONFIG_SK98LIN=m
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-CONFIG_PCMCIA_RAYCS=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_PCMCIA_WL3501=m
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-CONFIG_PRISM54=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_LANMEDIA=m
-CONFIG_SYNCLINK_SYNCPPP=m
-CONFIG_HDLC=m
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_X25 is not set
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300=m
-
-#
-# Cyclades-PC300 MLPPP support is disabled.
-#
-
-#
-# Refer to the file README.mlppp, provided by PC300 package.
-#
-CONFIG_FARSYNC=m
-CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NET_FC is not set
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=y
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-# CONFIG_WDT_501_PCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_NVRAM=m
-CONFIG_GEN_RTC=m
-# CONFIG_GEN_RTC_X is not set
-CONFIG_DTLK=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
-CONFIG_TCG_TPM=m
-CONFIG_TCG_NSC=m
-CONFIG_TCG_ATMEL=m
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-CONFIG_I2C_ISA=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_FSCHER=m
-CONFIG_SENSORS_FSCPOS=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83627HF=m
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
-CONFIG_SENSORS_M41T00=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-# CONFIG_VIDEO_SAA7134_DVB is not set
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_CX88_DVB is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_DVB_AV7110=m
-# CONFIG_DVB_AV7110_FIRMWARE is not set
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_DIBUSB=m
-# CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES is not set
-# CONFIG_DVB_DIBCOM_DEBUG is not set
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-CONFIG_DVB_B2C2_SKYSTAR=m
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA80XX=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_ATMEL_AT76C651=m
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terresterial DTV) frontends
-#
-CONFIG_DVB_NXT2002=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_BLUETOOTH_TTY=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_MTOUCH is not set
-CONFIG_USB_EGALAX=m
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRPRIME=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_AUERSWALD=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_SISUSBVGA=m
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-CONFIG_USB_ATM=m
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-# CONFIG_SECURITY_SELINUX is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/iw_we18-5.diff b/packages/linux/linux-dht-walnut-2.6.12.6/iw_we18-5.diff
deleted file mode 100644
index 85fcdd1224..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12.6/iw_we18-5.diff
+++ /dev/null
@@ -1,462 +0,0 @@
-diff -upr linux-2.6.11/include/linux/wireless.h linux-2.6.11-WE18/include/linux/wireless.h
---- linux-2.6.11/include/linux/wireless.h	2004-12-24 13:35:01.000000000 -0800
-+++ linux-2.6.11-WE18/include/linux/wireless.h	2005-03-12 09:53:02.000000000 -0800
-@@ -1,10 +1,10 @@
- /*
-  * This file define a set of standard wireless extensions
-  *
-- * Version :	17	21.6.04
-+ * Version :	18	12.3.05
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
-  */
- 
- #ifndef _LINUX_WIRELESS_H
-@@ -82,7 +82,7 @@
-  * (there is some stuff that will be added in the future...)
-  * I just plan to increment with each new version.
-  */
--#define WIRELESS_EXT	17
-+#define WIRELESS_EXT	18
- 
- /*
-  * Changes :
-@@ -182,6 +182,21 @@
-  *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
-  *	- Wireless Event capability in struct iw_range
-  *	- Add support for relative TxPower (yick !)
-+ *
-+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
-+ * ----------
-+ *	- Add support for WPA/WPA2
-+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
-+ *	  SIOCGIWENCODEEXT)
-+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
-+ *	- Add SIOCSIWMLME
-+ *	- Add SIOCSIWPMKSA
-+ *	- Add struct iw_range bit field for supported encoding capabilities
-+ *	- Add optional scan request parameters for SIOCSIWSCAN
-+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
-+ *	  related parameters (extensible up to 4096 parameter values)
-+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
-+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
-  */
- 
- /**************************** CONSTANTS ****************************/
-@@ -256,6 +271,30 @@
- #define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
- #define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
- 
-+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
-+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
-+ * fields. More than one IE may be included in the request. Setting the generic
-+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
-+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
-+ * are required to report the used IE as a wireless event, e.g., when
-+ * associating with an AP. */
-+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-+
-+/* WPA : IEEE 802.11 MLME requests */
-+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-+					 * struct iw_mlme */
-+/* WPA : Authentication mode parameters */
-+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-+
-+/* WPA : Extended version of encoding configuration */
-+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-+
-+/* WPA2 : PMKSA cache management */
-+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-+
- /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
- 
- /* These 32 ioctl are wireless device private, for 16 commands.
-@@ -297,6 +336,34 @@
- #define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
- #define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
- #define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-+					 * (scan results); This includes id and
-+					 * length fields. One IWEVGENIE may
-+					 * contain more than one IE. Scan
-+					 * results may contain one or more
-+					 * IWEVGENIE events. */
-+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-+					 * (struct iw_michaelmicfailure)
-+					 */
-+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-+					 * The data includes id and length
-+					 * fields and may contain more than one
-+					 * IE. This event is required in
-+					 * Managed mode if the driver
-+					 * generates its own WPA/RSN IE. This
-+					 * should be sent just before
-+					 * IWEVREGISTERED event for the
-+					 * association. */
-+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-+					 * Response. The data includes id and
-+					 * length fields and may contain more
-+					 * than one IE. This may be sent
-+					 * between IWEVASSOCREQIE and
-+					 * IWEVREGISTERED events for the
-+					 * association. */
-+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-+					 * pre-authentication
-+					 * (struct iw_pmkid_cand) */
- 
- #define IWEVFIRST	0x8C00
- 
-@@ -432,12 +499,94 @@
- #define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
- #define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
- #define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-+/* struct iw_scan_req scan_type */
-+#define IW_SCAN_TYPE_ACTIVE 0
-+#define IW_SCAN_TYPE_PASSIVE 1
- /* Maximum size of returned data */
- #define IW_SCAN_MAX_DATA	4096	/* In bytes */
- 
- /* Max number of char in custom event - use multiple of them if needed */
- #define IW_CUSTOM_MAX		256	/* In bytes */
- 
-+/* Generic information element */
-+#define IW_GENERIC_IE_MAX	1024
-+
-+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-+#define IW_MLME_DEAUTH		0
-+#define IW_MLME_DISASSOC	1
-+
-+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-+#define IW_AUTH_INDEX		0x0FFF
-+#define IW_AUTH_FLAGS		0xF000
-+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
-+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
-+ * parameter that is being set/get to; value will be read/written to
-+ * struct iw_param value field) */
-+#define IW_AUTH_WPA_VERSION		0
-+#define IW_AUTH_CIPHER_PAIRWISE		1
-+#define IW_AUTH_CIPHER_GROUP		2
-+#define IW_AUTH_KEY_MGMT		3
-+#define IW_AUTH_TKIP_COUNTERMEASURES	4
-+#define IW_AUTH_DROP_UNENCRYPTED	5
-+#define IW_AUTH_80211_AUTH_ALG		6
-+#define IW_AUTH_WPA_ENABLED		7
-+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-+#define IW_AUTH_ROAMING_CONTROL		9
-+#define IW_AUTH_PRIVACY_INVOKED		10
-+
-+/* IW_AUTH_WPA_VERSION values (bit field) */
-+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-+
-+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
-+#define IW_AUTH_CIPHER_NONE	0x00000001
-+#define IW_AUTH_CIPHER_WEP40	0x00000002
-+#define IW_AUTH_CIPHER_TKIP	0x00000004
-+#define IW_AUTH_CIPHER_CCMP	0x00000008
-+#define IW_AUTH_CIPHER_WEP104	0x00000010
-+
-+/* IW_AUTH_KEY_MGMT values (bit field) */
-+#define IW_AUTH_KEY_MGMT_802_1X	1
-+#define IW_AUTH_KEY_MGMT_PSK	2
-+
-+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-+#define IW_AUTH_ALG_LEAP	0x00000004
-+
-+/* IW_AUTH_ROAMING_CONTROL values */
-+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-+					 * control */
-+
-+/* SIOCSIWENCODEEXT definitions */
-+#define IW_ENCODE_SEQ_MAX_SIZE	8
-+/* struct iw_encode_ext ->alg */
-+#define IW_ENCODE_ALG_NONE	0
-+#define IW_ENCODE_ALG_WEP	1
-+#define IW_ENCODE_ALG_TKIP	2
-+#define IW_ENCODE_ALG_CCMP	3
-+/* struct iw_encode_ext ->ext_flags */
-+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-+
-+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-+#define IW_MICFAILURE_GROUP	0x00000004
-+#define IW_MICFAILURE_PAIRWISE	0x00000008
-+#define IW_MICFAILURE_STAKEY	0x00000010
-+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-+					    */
-+
-+/* Bit field values for enc_capa in struct iw_range */
-+#define IW_ENC_CAPA_WPA		0x00000001
-+#define IW_ENC_CAPA_WPA2	0x00000002
-+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-+
- /* Event capability macros - in (struct iw_range *)->event_capa
-  * Because we have more than 32 possible events, we use an array of
-  * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-@@ -546,6 +695,132 @@ struct	iw_thrspy
- 	struct iw_quality	high;		/* High threshold */
- };
- 
-+/*
-+ *	Optional data for scan request
-+ *
-+ *	Note: these optional parameters are controlling parameters for the
-+ *	scanning behavior, these do not apply to getting scan results
-+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
-+ *	provide a merged results with all BSSes even if the previous scan
-+ *	request limited scanning to a subset, e.g., by specifying an SSID.
-+ *	Especially, scan results are required to include an entry for the
-+ *	current BSS if the driver is in Managed mode and associated with an AP.
-+ */
-+struct	iw_scan_req
-+{
-+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-+	__u8		essid_len;
-+	__u8		num_channels; /* num entries in channel_list;
-+				       * 0 = scan all allowed channels */
-+	__u8		flags; /* reserved as padding; use zero, this may
-+				* be used in the future for adding flags
-+				* to request different scan behavior */
-+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-+				* individual address of a specific BSS */
-+
-+	/*
-+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-+	 * the current ESSID. This allows scan requests for specific ESSID
-+	 * without having to change the current ESSID and potentially breaking
-+	 * the current association.
-+	 */
-+	__u8		essid[IW_ESSID_MAX_SIZE];
-+
-+	/*
-+	 * Optional parameters for changing the default scanning behavior.
-+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-+	 * reasonable default values. min_channel_time defines the time that
-+	 * will be used to wait for the first reply on each channel. If no
-+	 * replies are received, next channel will be scanned after this. If
-+	 * replies are received, total time waited on the channel is defined by
-+	 * max_channel_time.
-+	 */
-+	__u32		min_channel_time; /* in TU */
-+	__u32		max_channel_time; /* in TU */
-+
-+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-+};
-+
-+/* ------------------------- WPA SUPPORT ------------------------- */
-+
-+/*
-+ *	Extended data structure for get/set encoding (this is used with
-+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
-+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
-+ *	only the data contents changes (key data -> this structure, including
-+ *	key data).
-+ *
-+ *	If the new key is the first group key, it will be set as the default
-+ *	TX key. Otherwise, default TX key index is only changed if
-+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
-+ *
-+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
-+ *	special "change TX key index" operation which is indicated by setting
-+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
-+ *
-+ *	tx_seq/rx_seq are only used when respective
-+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
-+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
-+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
-+ *	used only by an Authenticator (AP or an IBSS station) to get the
-+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
-+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
-+ *	debugging/testing.
-+ */
-+struct	iw_encode_ext
-+{
-+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-+			       * (group) keys or unicast address for
-+			       * individual keys */
-+	__u16		alg; /* IW_ENCODE_ALG_* */
-+	__u16		key_len;
-+	__u8		key[0];
-+};
-+
-+/* SIOCSIWMLME data */
-+struct	iw_mlme
-+{
-+	__u16		cmd; /* IW_MLME_* */
-+	__u16		reason_code;
-+	struct sockaddr	addr;
-+};
-+
-+/* SIOCSIWPMKSA data */
-+#define IW_PMKSA_ADD		1
-+#define IW_PMKSA_REMOVE		2
-+#define IW_PMKSA_FLUSH		3
-+
-+#define IW_PMKID_LEN	16
-+
-+struct	iw_pmksa
-+{
-+	__u32		cmd; /* IW_PMKSA_* */
-+	struct sockaddr	bssid;
-+	__u8		pmkid[IW_PMKID_LEN];
-+};
-+
-+/* IWEVMICHAELMICFAILURE data */
-+struct	iw_michaelmicfailure
-+{
-+	__u32		flags;
-+	struct sockaddr	src_addr;
-+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+};
-+
-+/* IWEVPMKIDCAND data */
-+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-+struct	iw_pmkid_cand
-+{
-+	__u32		flags; /* IW_PMKID_CAND_* */
-+	__u32		index; /* the smaller the index, the higher the
-+				* priority */
-+	struct sockaddr	bssid;
-+};
-+
- /* ------------------------ WIRELESS STATS ------------------------ */
- /*
-  * Wireless statistics (used for /proc/net/wireless)
-@@ -725,6 +1000,8 @@ struct	iw_range
- 	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
- 	/* Note : this frequency list doesn't need to fit channel numbers,
- 	 * because each entry contain its channel index */
-+
-+	__u32		enc_capa; /* IW_ENC_CAPA_* bit field */
- };
- 
- /*
-diff -upr linux-2.6.11/net/core/wireless.c linux-2.6.11-WE18/net/core/wireless.c
---- linux-2.6.11/net/core/wireless.c	2005-03-04 15:55:29.000000000 -0800
-+++ linux-2.6.11-WE18/net/core/wireless.c	2005-03-12 09:11:24.000000000 -0800
-@@ -2,7 +2,7 @@
-  * This file implement the Wireless Extensions APIs.
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
-  *
-  * (As all part of the Linux kernel, this file is GPL)
-  */
-@@ -187,6 +187,12 @@ static const struct iw_ioctl_description
- 		.header_type	= IW_HEADER_TYPE_ADDR,
- 		.flags		= IW_DESCR_FLAG_DUMP,
- 	},
-+	[SIOCSIWMLME	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_mlme),
-+		.max_tokens	= sizeof(struct iw_mlme),
-+	},
- 	[SIOCGIWAPLIST	- SIOCIWFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_POINT,
- 		.token_size	= sizeof(struct sockaddr) +
-@@ -195,7 +201,10 @@ static const struct iw_ioctl_description
- 		.flags		= IW_DESCR_FLAG_NOMAX,
- 	},
- 	[SIOCSIWSCAN	- SIOCIWFIRST] = {
--		.header_type	= IW_HEADER_TYPE_PARAM,
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= 0,
-+		.max_tokens	= sizeof(struct iw_scan_req),
- 	},
- 	[SIOCGIWSCAN	- SIOCIWFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_POINT,
-@@ -273,6 +282,42 @@ static const struct iw_ioctl_description
- 	[SIOCGIWPOWER	- SIOCIWFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_PARAM,
- 	},
-+	[SIOCSIWGENIE	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[SIOCGIWGENIE	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[SIOCSIWAUTH	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_PARAM,
-+	},
-+	[SIOCGIWAUTH	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_PARAM,
-+	},
-+	[SIOCSIWENCODEEXT - SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_encode_ext),
-+		.max_tokens	= sizeof(struct iw_encode_ext) +
-+				  IW_ENCODING_TOKEN_MAX,
-+	},
-+	[SIOCGIWENCODEEXT - SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_encode_ext),
-+		.max_tokens	= sizeof(struct iw_encode_ext) +
-+				  IW_ENCODING_TOKEN_MAX,
-+	},
-+	[SIOCSIWPMKSA - SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_pmksa),
-+		.max_tokens	= sizeof(struct iw_pmksa),
-+	},
- };
- static const int standard_ioctl_num = (sizeof(standard_ioctl) /
- 				       sizeof(struct iw_ioctl_description));
-@@ -299,6 +344,31 @@ static const struct iw_ioctl_description
- 	[IWEVEXPIRED	- IWEVFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_ADDR, 
- 	},
-+	[IWEVGENIE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[IWEVMICHAELMICFAILURE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT, 
-+		.token_size	= 1,
-+		.max_tokens	= sizeof(struct iw_michaelmicfailure),
-+	},
-+	[IWEVASSOCREQIE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[IWEVASSOCRESPIE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[IWEVPMKIDCAND	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= sizeof(struct iw_pmkid_cand),
-+	},
- };
- static const int standard_event_num = (sizeof(standard_event) /
- 				       sizeof(struct iw_ioctl_description));
diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/linux-2.6.12-mppe-mppc-1.3.patch b/packages/linux/linux-dht-walnut-2.6.12.6/linux-2.6.12-mppe-mppc-1.3.patch
deleted file mode 100644
index aa430252c7..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12.6/linux-2.6.12-mppe-mppc-1.3.patch
+++ /dev/null
@@ -1,1559 +0,0 @@
-diff -ruN linux-2.6.12.orig/drivers/net/Kconfig linux-2.6.12/drivers/net/Kconfig
---- linux-2.6.12.orig/drivers/net/Kconfig	2005-06-28 19:57:16.000000000 +0200
-+++ linux-2.6.12/drivers/net/Kconfig	2005-06-28 20:07:01.000000000 +0200
-@@ -2417,6 +2417,32 @@
- 	  module; it is called bsd_comp and will show up in the directory
- 	  modules once you have said "make modules". If unsure, say N.
- 
-+config PPP_MPPE_MPPC
-+	tristate "Microsoft PPP compression/encryption (MPPC/MPPE)"
-+	depends on PPP
-+	select CRYPTO_SHA1
-+	select CRYPTO_ARC4
-+	---help---
-+	  Support for the Microsoft Point-To-Point Compression (RFC2118) and 
-+	  Microsoft Point-To-Point Encryption (RFC3078). These protocols are
-+	  supported by Microsoft Windows and wide range of "hardware" access
-+	  servers. MPPE is common protocol in Virtual Private Networks. According
-+	  to RFC3078, MPPE supports 40, 56 and 128-bit key lengths. Depending on
-+	  PPP daemon configuration on both ends of the link, following scenarios
-+	  are possible:
-+		- only compression (MPPC) is used,
-+		- only encryption (MPPE) is used,
-+		- compression and encryption (MPPC+MPPE) are used.
-+
-+	  Please note that Hi/Fn (http://www.hifn.com) holds patent on MPPC so
-+	  you should check if this patent is valid in your country in order to
-+	  avoid legal problems.
-+
-+	  For more information please visit http://free.polbox.pl/h/hs001
-+
-+	  To compile this driver as a module, choose M here. The module will
-+	  be called ppp_mppe_mppc.ko.
-+
- config PPPOE
- 	tristate "PPP over Ethernet (EXPERIMENTAL)"
- 	depends on EXPERIMENTAL && PPP
-diff -ruN linux-2.6.12.orig/drivers/net/Makefile linux-2.6.12/drivers/net/Makefile
---- linux-2.6.12.orig/drivers/net/Makefile	2005-06-28 19:57:16.000000000 +0200
-+++ linux-2.6.12/drivers/net/Makefile	2005-06-28 20:07:01.000000000 +0200
-@@ -105,6 +105,7 @@
- obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
- obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
- obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-+obj-$(CONFIG_PPP_MPPE_MPPC) += ppp_mppe_mppc.o
- obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
- 
- obj-$(CONFIG_SLIP) += slip.o
-diff -ruN linux-2.6.12.orig/drivers/net/ppp_generic.c linux-2.6.12/drivers/net/ppp_generic.c
---- linux-2.6.12.orig/drivers/net/ppp_generic.c	2005-06-28 19:57:20.000000000 +0200
-+++ linux-2.6.12/drivers/net/ppp_generic.c	2005-06-28 20:07:01.000000000 +0200
-@@ -19,7 +19,7 @@
-  * PPP driver, written by Michael Callahan and Al Longyear, and
-  * subsequently hacked by Paul Mackerras.
-  *
-- * ==FILEVERSION 20041108==
-+ * ==FILEVERSION 20050110==
-  */
- 
- #include <linux/config.h>
-@@ -105,6 +105,7 @@
- 	spinlock_t	rlock;		/* lock for receive side 58 */
- 	spinlock_t	wlock;		/* lock for transmit side 5c */
- 	int		mru;		/* max receive unit 60 */
-+	int		mru_alloc;	/* MAX(1500,MRU) for dev_alloc_skb() */
- 	unsigned int	flags;		/* control bits 64 */
- 	unsigned int	xstate;		/* transmit state bits 68 */
- 	unsigned int	rstate;		/* receive state bits 6c */
-@@ -632,7 +633,9 @@
- 	case PPPIOCSMRU:
- 		if (get_user(val, p))
- 			break;
--		ppp->mru = val;
-+		ppp->mru_alloc = ppp->mru = val;
-+		if (ppp->mru_alloc < PPP_MRU)
-+		    ppp->mru_alloc = PPP_MRU;	/* increase for broken peers */
- 		err = 0;
- 		break;
- 
-@@ -1107,14 +1110,37 @@
- 	case PPP_CCP:
- 		/* peek at outbound CCP frames */
- 		ppp_ccp_peek(ppp, skb, 0);
-+		/*
-+		 * When LZS or MPPE/MPPC has been negotiated we don't send
-+		 * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd
-+		 * sends such a packet but we silently discard it here
-+		 */
-+		if (CCP_CODE(skb->data+2) == CCP_RESETACK
-+		    && (ppp->xcomp->compress_proto == CI_MPPE
-+			|| ppp->xcomp->compress_proto == CI_LZS)) {
-+		    --ppp->stats.tx_packets;
-+		    ppp->stats.tx_bytes -= skb->len - 2;
-+		    kfree_skb(skb);
-+		    return;
-+		}
- 		break;
- 	}
- 
- 	/* try to do packet compression */
- 	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0
- 	    && proto != PPP_LCP && proto != PPP_CCP) {
--		new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len,
--				    GFP_ATOMIC);
-+		int comp_ovhd = 0;
-+		/* 
-+		 * because of possible data expansion when MPPC or LZS
-+		 * is used, allocate compressor's buffer 12.5% bigger
-+		 * than MTU
-+		 */
-+		if (ppp->xcomp->compress_proto == CI_MPPE)
-+		    comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + MPPE_OVHD;
-+		else if (ppp->xcomp->compress_proto == CI_LZS)
-+		    comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + LZS_OVHD;
-+		new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len
-+				    + comp_ovhd, GFP_ATOMIC);
- 		if (new_skb == 0) {
- 			printk(KERN_ERR "PPP: no memory (comp pkt)\n");
- 			goto drop;
-@@ -1132,9 +1158,21 @@
- 			skb = new_skb;
- 			skb_put(skb, len);
- 			skb_pull(skb, 2);	/* pull off A/C bytes */
--		} else {
-+		} else if (len == 0) {
- 			/* didn't compress, or CCP not up yet */
- 			kfree_skb(new_skb);
-+		} else {
-+			/*
-+			 * (len < 0)
-+			 * MPPE requires that we do not send unencrypted
-+			 * frames.  The compressor will return -1 if we
-+			 * should drop the frame.  We cannot simply test
-+			 * the compress_proto because MPPE and MPPC share
-+			 * the same number.
-+			 */
-+			printk(KERN_ERR "ppp: compressor dropped pkt\n");
-+			kfree_skb(new_skb);
-+			goto drop;
- 		}
- 	}
- 
-@@ -1640,14 +1678,15 @@
- 		goto err;
- 
- 	if (proto == PPP_COMP) {
--		ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN);
-+		ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN);
- 		if (ns == 0) {
- 			printk(KERN_ERR "ppp_decompress_frame: no memory\n");
- 			goto err;
- 		}
- 		/* the decompressor still expects the A/C bytes in the hdr */
- 		len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2,
--				skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN);
-+				skb->len + 2, ns->data,
-+				ppp->mru_alloc + PPP_HDRLEN);
- 		if (len < 0) {
- 			/* Pass the compressed frame to pppd as an
- 			   error indication. */
-@@ -1673,7 +1712,14 @@
- 	return skb;
- 
-  err:
--	ppp->rstate |= SC_DC_ERROR;
-+	if (ppp->rcomp->compress_proto != CI_MPPE
-+	    && ppp->rcomp->compress_proto != CI_LZS) {
-+	    /*
-+	     * If decompression protocol isn't MPPE/MPPC or LZS, we set
-+	     * SC_DC_ERROR flag and wait for CCP_RESETACK
-+	     */
-+	    ppp->rstate |= SC_DC_ERROR;
-+	}
- 	ppp_receive_error(ppp);
- 	return skb;
- }
-@@ -2349,6 +2395,7 @@
- 	memset(ppp, 0, sizeof(struct ppp));
- 
- 	ppp->mru = PPP_MRU;
-+	ppp->mru_alloc = PPP_MRU;
- 	init_ppp_file(&ppp->file, INTERFACE);
- 	ppp->file.hdrlen = PPP_HDRLEN - 2;	/* don't count proto bytes */
- 	for (i = 0; i < NUM_NP; ++i)
-diff -ruN linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c linux-2.6.12/drivers/net/ppp_mppe_mppc.c
---- linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12/drivers/net/ppp_mppe_mppc.c	2005-06-28 20:07:01.000000000 +0200
-@@ -0,0 +1,1299 @@
-+/*
-+ * ppp_mppe_mppc.c - MPPC/MPPE "compressor/decompressor" module.
-+ *
-+ * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu>
-+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com>
-+ * Copyright (c) 2002-2004 Jan Dubiec <jdx@slackware.pl>
-+ * 
-+ * Permission to use, copy, modify, and distribute this software and its
-+ * documentation is hereby granted, provided that the above copyright
-+ * notice appears in all copies. This software is provided without any
-+ * warranty, express or implied.
-+ *
-+ * The code is based on MPPE kernel module written by Árpád Magosányi and
-+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/.
-+ * I have added MPPC and 56 bit session keys support in MPPE.
-+ *
-+ * WARNING! Although this is open source code, its usage in some countries
-+ * (in particular in the USA) may violate Stac Inc. patent for MPPC.
-+ *
-+ *  ==FILEVERSION 20041123==
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <asm/scatterlist.h>
-+#include <linux/vmalloc.h>
-+#include <linux/crypto.h>
-+
-+#include <linux/ppp_defs.h>
-+#include <linux/ppp-comp.h>
-+
-+/*
-+ * State for a mppc/mppe "(de)compressor".
-+ */
-+struct ppp_mppe_state {
-+    struct crypto_tfm *arc4_tfm;
-+    struct crypto_tfm *sha1_tfm;
-+    u8		*sha1_digest;
-+    u8		master_key[MPPE_MAX_KEY_LEN];
-+    u8		session_key[MPPE_MAX_KEY_LEN];
-+    u8		mppc;		/* do we use compression (MPPC)? */
-+    u8		mppe;		/* do we use encryption (MPPE)? */
-+    u8		keylen;		/* key length in bytes */
-+    u8		bitkeylen;	/* key length in bits */
-+    u16		ccount;		/* coherency counter */
-+    u16		bits;		/* MPPC/MPPE control bits */
-+    u8		stateless;	/* do we use stateless mode? */
-+    u8		nextflushed;	/* set A bit in the next outgoing packet;
-+				   used only by compressor*/
-+    u8		flushexpected;	/* drop packets until A bit is received;
-+				   used only by decompressor*/
-+    u8		*hist;		/* MPPC history */
-+    u16		*hash;		/* Hash table; used only by compressor */
-+    u16		histptr;	/* history "cursor" */
-+    int		unit;
-+    int		debug;
-+    int		mru;
-+    struct compstat stats;
-+};
-+
-+#define MPPE_HIST_LEN		8192	/* MPPC history size */
-+#define MPPE_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
-+
-+#define MPPE_BIT_FLUSHED	0x80	/* bit A */
-+#define MPPE_BIT_RESET		0x40	/* bit B */
-+#define MPPE_BIT_COMP		0x20	/* bit C */
-+#define MPPE_BIT_ENCRYPTED	0x10	/* bit D */
-+
-+#define MPPE_SALT0		0xD1	/* values used in MPPE key derivation */
-+#define MPPE_SALT1		0x26	/* according to RFC3079 */
-+#define MPPE_SALT2		0x9E
-+
-+#define MPPE_CCOUNT(x)		((((x)[4] & 0x0f) << 8) + (x)[5])
-+#define MPPE_BITS(x)		((x)[4] & 0xf0)
-+#define MPPE_CTRLHI(x)		((((x)->ccount & 0xf00)>>8)|((x)->bits))
-+#define MPPE_CTRLLO(x)		((x)->ccount & 0xff)
-+
-+/*
-+ * Kernel Crypto API needs its arguments to be in kmalloc'd memory, not in the
-+ * module static data area. That means sha_pad needs to be kmalloc'd. It is done
-+ * in mppe_module_init(). This has been pointed out on 30th July 2004 by Oleg
-+ * Makarenko on pptpclient-devel mailing list.
-+ */
-+#define SHA1_PAD_SIZE		40
-+struct sha_pad {
-+    unsigned char sha_pad1[SHA1_PAD_SIZE];
-+    unsigned char sha_pad2[SHA1_PAD_SIZE];
-+};
-+static struct sha_pad *sha_pad;
-+
-+static inline void
-+setup_sg(struct scatterlist *sg, const void  *address, unsigned int length)
-+{
-+    sg[0].page = virt_to_page(address);
-+    sg[0].offset = offset_in_page(address);
-+    sg[0].length = length;
-+}
-+
-+static inline void
-+arc4_setkey(struct ppp_mppe_state *state, const unsigned char *key,
-+	    const unsigned int keylen)
-+{
-+    crypto_cipher_setkey(state->arc4_tfm, key, keylen);
-+}
-+
-+static inline void
-+arc4_encrypt(struct ppp_mppe_state *state, const unsigned char *in,
-+	     const unsigned int len, unsigned char *out)
-+{
-+    struct scatterlist sgin[4], sgout[4];
-+
-+    setup_sg(sgin, in, len);
-+    setup_sg(sgout, out, len);
-+    crypto_cipher_encrypt(state->arc4_tfm, sgout, sgin, len);
-+}
-+
-+#define arc4_decrypt arc4_encrypt
-+
-+/*
-+ * Key Derivation, from RFC 3078, RFC 3079.
-+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079.
-+ */
-+static void
-+get_new_key_from_sha(struct ppp_mppe_state *state, unsigned char *interim_key)
-+{
-+    struct scatterlist sg[4];
-+
-+    setup_sg(&sg[0], state->master_key, state->keylen);
-+    setup_sg(&sg[1], sha_pad->sha_pad1, sizeof(sha_pad->sha_pad1));
-+    setup_sg(&sg[2], state->session_key, state->keylen);
-+    setup_sg(&sg[3], sha_pad->sha_pad2, sizeof(sha_pad->sha_pad2));
-+
-+    crypto_digest_digest (state->sha1_tfm, sg, 4, state->sha1_digest);
-+
-+    memcpy(interim_key, state->sha1_digest, state->keylen);
-+}
-+
-+static void
-+mppe_change_key(struct ppp_mppe_state *state, int initialize)
-+{
-+    unsigned char interim_key[MPPE_MAX_KEY_LEN];
-+
-+    get_new_key_from_sha(state, interim_key);
-+    if (initialize) {
-+	memcpy(state->session_key, interim_key, state->keylen);
-+    } else {
-+	arc4_setkey(state, interim_key, state->keylen);
-+	arc4_encrypt(state, interim_key, state->keylen, state->session_key);
-+    }
-+    if (state->keylen == 8) {
-+	if (state->bitkeylen == 40) {
-+	    state->session_key[0] = MPPE_SALT0;
-+	    state->session_key[1] = MPPE_SALT1;
-+	    state->session_key[2] = MPPE_SALT2;
-+	} else {
-+	    state->session_key[0] = MPPE_SALT0;
-+	}
-+    }
-+    arc4_setkey(state, state->session_key, state->keylen);
-+}
-+
-+/* increase 12-bit coherency counter */
-+static inline void
-+mppe_increase_ccount(struct ppp_mppe_state *state)
-+{
-+    state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT;
-+    if (state->mppe) {
-+	if (state->stateless) {
-+	    mppe_change_key(state, 0);
-+	    state->nextflushed = 1;
-+	} else {
-+	    if ((state->ccount & 0xff) == 0xff) {
-+		mppe_change_key(state, 0);
-+	    }
-+	}
-+    }
-+}
-+
-+/* allocate space for a MPPE/MPPC (de)compressor.  */
-+/*   comp != 0 -> init compressor */
-+/*   comp = 0 -> init decompressor */
-+static void *
-+mppe_alloc(unsigned char *options, int opt_len, int comp)
-+{
-+    struct ppp_mppe_state *state;
-+    unsigned int digestsize;
-+    u8* fname;
-+
-+    fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc";
-+
-+    /*  
-+     * Hack warning - additionally to the standard MPPC/MPPE configuration
-+     * options, pppd passes to the (de)copressor 8 or 16 byte session key.
-+     * Therefore options[1] contains MPPC/MPPE configuration option length
-+     * (CILEN_MPPE = 6), but the real options length, depending on the key
-+     * length, is 6+8 or 6+16.
-+     */
-+    if (opt_len < CILEN_MPPE) {
-+	printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len);
-+	return NULL;
-+    }
-+
-+    if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+	(options[2] & ~MPPE_STATELESS) != 0 ||
-+	options[3] != 0 || options[4] != 0 ||
-+	(options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+	(options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+	printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+	       "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0],
-+	       options[1], options[2], options[3], options[4], options[5]);
-+	return NULL;
-+    }
-+
-+    state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL);
-+    if (state == NULL) {
-+	printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname,
-+	       comp ? "" : "de");
-+	return NULL;
-+    }
-+    memset(state, 0, sizeof(struct ppp_mppe_state));
-+
-+    state->mppc = options[5] & MPPE_MPPC;	/* Do we use MPPC? */
-+    state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+	MPPE_40BIT);				/* Do we use MPPE? */
-+
-+    if (state->mppc) {
-+	/* allocate MPPC history */
-+	state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8));
-+	if (state->hist == NULL) {
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+		   fname);
-+	    return NULL;
-+	}
-+
-+	/* allocate hashtable for MPPC compressor */
-+	if (comp) {
-+	    state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16));
-+	    if (state->hash == NULL) {
-+		vfree(state->hist);
-+		kfree(state);
-+		printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+		       fname);
-+		return NULL;
-+	    }
-+	}
-+    }
-+
-+    if (state->mppe) { /* specific for MPPE */
-+	/* Load ARC4 algorithm */
-+	state->arc4_tfm = crypto_alloc_tfm("arc4", 0);
-+	if (state->arc4_tfm == NULL) {
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot load ARC4 module\n", fname);
-+	    return NULL;
-+	}
-+
-+	/* Load SHA1 algorithm */
-+	state->sha1_tfm = crypto_alloc_tfm("sha1", 0);
-+	if (state->sha1_tfm == NULL) {
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot load SHA1 module\n", fname);
-+	    return NULL;
-+	}
-+
-+	digestsize = crypto_tfm_alg_digestsize(state->sha1_tfm);
-+	if (digestsize < MPPE_MAX_KEY_LEN) {
-+	    crypto_free_tfm(state->sha1_tfm);
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: CryptoAPI SHA1 digest size too small\n", fname);
-+	}
-+
-+	state->sha1_digest = kmalloc(digestsize, GFP_KERNEL);
-+	if (!state->sha1_digest) {
-+	    crypto_free_tfm(state->sha1_tfm);
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot allocate space for SHA1 digest\n", fname);
-+	}
-+
-+	memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN);
-+	memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN);
-+	/* initial key generation is done in mppe_init() */
-+    }
-+
-+    return (void *) state;
-+}
-+
-+static void *
-+mppe_comp_alloc(unsigned char *options, int opt_len)
-+{
-+    return mppe_alloc(options, opt_len, 1);
-+}
-+
-+static void *
-+mppe_decomp_alloc(unsigned char *options, int opt_len)
-+{
-+    return mppe_alloc(options, opt_len, 0);
-+}
-+
-+/* cleanup the (de)compressor */
-+static void
-+mppe_comp_free(void *arg)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+
-+    if (state != NULL) {
-+	if (state->mppe) {
-+	    if (state->sha1_digest != NULL)
-+		kfree(state->sha1_digest);
-+	    if (state->sha1_tfm != NULL)
-+		crypto_free_tfm(state->sha1_tfm);
-+	    if (state->arc4_tfm != NULL)
-+		crypto_free_tfm(state->arc4_tfm);
-+	}
-+	if (state->hist != NULL)
-+	    vfree(state->hist);
-+	if (state->hash != NULL)
-+	    vfree(state->hash);
-+	kfree(state);
-+    }
-+}
-+
-+/* init MPPC/MPPE (de)compresor */
-+/*   comp != 0 -> init compressor */
-+/*   comp = 0 -> init decompressor */
-+static int
-+mppe_init(void *arg, unsigned char *options, int opt_len, int unit,
-+	  int hdrlen, int mru, int debug, int comp)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+    u8* fname;
-+
-+    fname = comp ? "mppe_comp_init" : "mppe_decomp_init";
-+
-+    if (opt_len < CILEN_MPPE) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: wrong options length: %u\n",
-+		   fname, opt_len);
-+	return 0;
-+    }
-+
-+    if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+	(options[2] & ~MPPE_STATELESS) != 0 ||
-+	options[3] != 0 || options[4] != 0 ||
-+	(options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+	(options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+		   "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname,
-+		   options[0], options[1], options[2], options[3], options[4],
-+		   options[5]);
-+	return 0;
-+    }
-+
-+    if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT &&
-+	(options[5] & ~MPPE_MPPC) != MPPE_56BIT &&
-+	(options[5] & ~MPPE_MPPC) != MPPE_40BIT &&
-+	(options[5] & MPPE_MPPC) != MPPE_MPPC) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n",
-+		   fname, options[5]);
-+	return 0;
-+    }
-+
-+    state->mppc = options[5] & MPPE_MPPC;	/* Do we use MPPC? */
-+    state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+	MPPE_40BIT);				/* Do we use MPPE? */
-+    state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */
-+
-+    switch (state->mppe) {
-+    case MPPE_40BIT:     /* 40 bit key */
-+	state->keylen = 8;
-+	state->bitkeylen = 40;
-+	break;
-+    case MPPE_56BIT:     /* 56 bit key */
-+	state->keylen = 8;
-+	state->bitkeylen = 56;
-+	break;
-+    case MPPE_128BIT:    /* 128 bit key */
-+	state->keylen = 16;
-+	state->bitkeylen = 128;
-+	break;
-+    default:
-+	state->keylen = 0;
-+	state->bitkeylen = 0;
-+    }
-+
-+    state->ccount = MPPE_MAX_CCOUNT;
-+    state->bits = 0;
-+    state->unit  = unit;
-+    state->debug = debug;
-+    state->histptr = MPPE_HIST_LEN;
-+    if (state->mppc) {	/* reset history if MPPC was negotiated */
-+	memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8));
-+    }
-+
-+    if (state->mppe) { /* generate initial session keys */
-+	mppe_change_key(state, 1);
-+    }
-+
-+    if (comp) { /* specific for compressor */
-+	state->nextflushed = 1;
-+    } else { /* specific for decompressor */
-+	state->mru = mru;
-+	state->flushexpected = 1;
-+    }
-+
-+    return 1;
-+}
-+
-+static int
-+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+	       int hdrlen, int debug)
-+{
-+    return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1);
-+}
-+
-+
-+static int
-+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+		 int hdrlen, int mru, int debug)
-+{
-+    return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0);
-+}
-+
-+static void
-+mppe_comp_reset(void *arg)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+    if (state->debug)
-+	printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n",
-+	       __FUNCTION__, state->unit);
-+
-+    state->nextflushed = 1;
-+    if (state->mppe)
-+	arc4_setkey(state, state->session_key, state->keylen);
-+}
-+
-+static void
-+mppe_decomp_reset(void *arg)
-+{
-+    /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack.
-+       But when we receive such a packet, we just ignore it. */
-+    return;
-+}
-+
-+static void
-+mppe_stats(void *arg, struct compstat *stats)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+    *stats = state->stats;
-+}
-+
-+/***************************/
-+/**** Compression stuff ****/
-+/***************************/
-+/* inserts 1 to 8 bits into the output buffer */
-+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n) {
-+	*l = (*l) - n;
-+	val <<= *l;
-+	*buf = *buf | (val & 0xff);
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++;
-+	*l = 8 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 8) & 0xff);
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+/* inserts 9 to 16 bits into the output buffer */
-+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n - 8) {
-+	(*i)++;
-+	*l = 8 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 8) & 0xff);
-+	*(++buf) = val & 0xff;
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++; (*i)++;
-+	*l = 16 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 16) & 0xff);
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+/* inserts 17 to 24 bits into the output buffer */
-+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n - 16) {
-+	(*i)++; (*i)++;
-+	*l = 16 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 16) & 0xff);
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++; (*i)++; (*i)++;
-+	*l = 24 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 24) & 0xff);
-+	*(++buf) = (val >> 16) & 0xff;
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+static int
-+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+	      unsigned char *obuf, int isize, int osize)
-+{
-+    u32 olen, off, len, idx, i, l;
-+    u8 *hist, *sbuf, *p, *q, *r, *s;
-+
-+    /*  
-+	At this point, to avoid possible buffer overflow caused by packet
-+	expansion during/after compression,  we should make sure that
-+	osize >= (((isize*9)/8)+1)+2, but we don't do that because in
-+	ppp_generic.c we simply allocate bigger obuf.
-+
-+	Maximum MPPC packet expansion is 12.5%. This is the worst case when
-+	all octets in the input buffer are >= 0x80 and we cannot find any
-+	repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC
-+	status bits and coherency counter.
-+    */
-+
-+    hist = state->hist + MPPE_HIST_LEN;
-+    /* check if there is enough room at the end of the history */
-+    if (state->histptr + isize >= 2*MPPE_HIST_LEN) {
-+	state->bits |= MPPE_BIT_RESET;
-+	state->histptr = MPPE_HIST_LEN;
-+	memcpy(state->hist, hist, MPPE_HIST_LEN);
-+    }
-+    /* add packet to the history; isize must be <= MPPE_HIST_LEN */
-+    sbuf = state->hist + state->histptr;
-+    memcpy(sbuf, ibuf, isize);
-+    state->histptr += isize;
-+
-+    /* compress data */
-+    r = sbuf + isize;
-+    *obuf = olen = i = 0;
-+    l = 8;
-+    while (i < isize - 2) {
-+	s = q = sbuf + i;
-+	idx = ((40543*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1fff;
-+	p = hist + state->hash[idx];
-+	state->hash[idx] = (u16) (s - hist);
-+	off = s - p;
-+	if (off > MPPE_HIST_LEN - 1 || off < 1 || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++) {
-+	    /* no match found; encode literal byte */
-+	    if (ibuf[i] < 0x80) {		/* literal byte < 0x80 */
-+		putbits8(obuf, (u32) ibuf[i], 8, &olen, &l);
-+	    } else {				/* literal byte >= 0x80 */
-+		putbits16(obuf, (u32) (0x100|(ibuf[i]&0x7f)), 9, &olen, &l);
-+	    }
-+	    ++i;
-+	    continue;
-+	}
-+	if (r - q >= 64) {
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++;
-+	    if (s - q == 64) {
-+		p--; s--;
-+		while((*p++ == *s++) && (s < r) && (p < q));
-+	    }
-+	} else {
-+	    while((*p++ == *s++) && (s < r) && (p < q));
-+	}
-+	len = s - q - 1;
-+	i += len;
-+
-+	/* at least 3 character match found; code data */
-+	/* encode offset */
-+	if (off < 64) {			/* 10-bit offset; 0 <= offset < 64 */
-+	    putbits16(obuf, 0x3c0|off, 10, &olen, &l);
-+	} else if (off < 320) {		/* 12-bit offset; 64 <= offset < 320 */
-+	    putbits16(obuf, 0xe00|(off-64), 12, &olen, &l);
-+	} else if (off < 8192) {	/* 16-bit offset; 320 <= offset < 8192 */
-+	    putbits16(obuf, 0xc000|(off-320), 16, &olen, &l);
-+	} else {
-+	    /* This shouldn't happen; we return 0 what means "packet expands",
-+	    and we send packet uncompressed. */
-+	    if (state->debug)
-+		printk(KERN_DEBUG "%s%d: wrong offset value: %d\n",
-+		       __FUNCTION__, state->unit, off);
-+	    return 0;
-+	}
-+	/* encode length of match */
-+	if (len < 4) {			/* length = 3 */
-+	    putbits8(obuf, 0, 1, &olen, &l);
-+	} else if (len < 8) {		/* 4 <= length < 8 */
-+	    putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l);
-+	} else if (len < 16) {		/* 8 <= length < 16 */
-+	    putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l);
-+	} else if (len < 32) {		/* 16 <= length < 32 */
-+	    putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l);
-+	} else if (len < 64) {		/* 32 <= length < 64 */
-+	    putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l);
-+	} else if (len < 128) {		/* 64 <= length < 128 */
-+	    putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l);
-+	} else if (len < 256) {		/* 128 <= length < 256 */
-+	    putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l);
-+	} else if (len < 512) {		/* 256 <= length < 512 */
-+	    putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l);
-+	} else if (len < 1024) {	/* 512 <= length < 1024 */
-+	    putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l);
-+	} else if (len < 2048) {	/* 1024 <= length < 2048 */
-+	    putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l);
-+	} else if (len < 4096) {	/* 2048 <= length < 4096 */
-+	    putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l);
-+	} else if (len < 8192) {	/* 4096 <= length < 8192 */
-+	    putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l);
-+	} else {
-+	    /* This shouldn't happen; we return 0 what means "packet expands",
-+	    and send packet uncompressed. */
-+	    if (state->debug)
-+		printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n",
-+		       __FUNCTION__, state->unit, len);
-+	    return 0;
-+	}
-+    }
-+
-+    /* Add remaining octets to the output */
-+    while(isize - i > 0) {
-+	if (ibuf[i] < 0x80) {	/* literal byte < 0x80 */
-+	    putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
-+	} else {		/* literal byte >= 0x80 */
-+	    putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
-+	}
-+    }
-+    /* Reset unused bits of the last output octet */
-+    if ((l != 0) && (l != 8)) {
-+	putbits8(obuf, 0, l, &olen, &l);
-+    }
-+
-+    return (int) olen;
-+}
-+
-+int
-+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
-+	      int isize, int osize)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+    int proto, olen, complen, off;
-+    unsigned char *wptr;
-+
-+    /* Check that the protocol is in the range we handle. */
-+    proto = PPP_PROTOCOL(ibuf);
-+    if (proto < 0x0021 || proto > 0x00fa)
-+	return 0;
-+
-+    wptr = obuf;
-+    /* Copy over the PPP header */
-+    wptr[0] = PPP_ADDRESS(ibuf);
-+    wptr[1] = PPP_CONTROL(ibuf);
-+    wptr[2] = PPP_COMP >> 8;
-+    wptr[3] = PPP_COMP;
-+    wptr += PPP_HDRLEN + (MPPE_OVHD / 2); /* Leave two octets for MPPE/MPPC bits */
-+
-+    /* 
-+     * In ver. 0.99 protocol field was compressed. Deflate and BSD compress
-+     * do PFC before actual compression, RCF2118 and RFC3078 are not precise
-+     * on this topic so I decided to do PFC. Unfortunately this change caused
-+     * incompatibility with older/other MPPE/MPPC modules. I have received
-+     * a lot of complaints from unexperienced users so I have decided to revert
-+     * to previous state, i.e. the protocol field is sent uncompressed now.
-+     * Although this may be changed in the future.
-+     *
-+     * Receiving side (mppe_decompress()) still accepts packets with compressed
-+     * and uncompressed protocol field so you shouldn't get "Unsupported protocol
-+     * 0x2145 received" messages anymore.
-+     */
-+    //off = (proto > 0xff) ? 2 : 3; /* PFC - skip first protocol byte if 0 */
-+    off = 2;
-+
-+    ibuf += off;
-+
-+    mppe_increase_ccount(state);
-+
-+    if (state->nextflushed) {
-+	state->bits |= MPPE_BIT_FLUSHED;
-+	state->nextflushed = 0;
-+	if (state->mppe && !state->stateless) {
-+	    /*
-+	     * If this is the flag packet, the key has been already changed in
-+	     * mppe_increase_ccount() so we dont't do it once again.
-+	     */
-+	    if ((state->ccount & 0xff) != 0xff) {
-+		arc4_setkey(state, state->session_key, state->keylen);
-+	    }
-+	}
-+	if (state->mppc) { /* reset history */
-+	    state->bits |= MPPE_BIT_RESET;
-+	    state->histptr = MPPE_HIST_LEN;
-+	    memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+	}
-+    }
-+
-+    if (state->mppc && !state->mppe) { /* Do only compression */
-+	complen = mppc_compress(state, ibuf, wptr, isize - off,
-+				osize - PPP_HDRLEN - (MPPE_OVHD / 2));
-+	/*
-+	 * TODO: Implement an heuristics to handle packet expansion in a smart
-+	 * way. Now, when a packet expands, we send it as uncompressed and
-+	 * when next packet is sent we have to reset compressor's history.
-+	 * Maybe it would be better to send such packet as compressed in order
-+	 * to keep history's continuity.
-+	 */
-+	if ((complen > isize) || (complen > osize - PPP_HDRLEN) ||
-+	    (complen == 0)) {
-+	    /* packet expands */
-+	    state->nextflushed = 1;
-+	    memcpy(wptr, ibuf, isize - off);
-+	    olen = isize - (off - 2) + MPPE_OVHD;
-+	    (state->stats).inc_bytes += olen;
-+	    (state->stats).inc_packets++;
-+	} else {
-+	    state->bits |= MPPE_BIT_COMP;
-+	    olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2);
-+	    (state->stats).comp_bytes += olen;
-+	    (state->stats).comp_packets++;
-+	}
-+    } else { /* Do encryption with or without compression */
-+	state->bits |= MPPE_BIT_ENCRYPTED;
-+	if (!state->mppc && state->mppe) { /* Do only encryption */
-+	    /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */
-+	    arc4_encrypt(state, ibuf, isize - off, wptr);
-+	    olen = isize - (off - 2) + MPPE_OVHD;
-+	    (state->stats).inc_bytes += olen;
-+	    (state->stats).inc_packets++;
-+	} else { /* Do compression and then encryption - RFC3078 */
-+	    complen = mppc_compress(state, ibuf, wptr, isize - off,
-+				    osize - PPP_HDRLEN - (MPPE_OVHD / 2));
-+	    /*
-+	     * TODO: Implement an heuristics to handle packet expansion in a smart
-+	     * way. Now, when a packet expands, we send it as uncompressed and
-+	     * when next packet is sent we have to reset compressor's history.
-+	     * Maybe it would be good to send such packet as compressed in order
-+	     * to keep history's continuity.
-+	     */
-+	    if ((complen > isize) || (complen > osize - PPP_HDRLEN) ||
-+		(complen == 0)) {
-+		/* packet expands */
-+		state->nextflushed = 1;
-+		arc4_encrypt(state, ibuf, isize - off, wptr);
-+		olen = isize - (off - 2) + MPPE_OVHD;
-+		(state->stats).inc_bytes += olen;
-+		(state->stats).inc_packets++;
-+	    } else {
-+		state->bits |= MPPE_BIT_COMP;
-+		/* Hack warning !!! RC4 implementation which we use does
-+		   encryption "in place" - it means that input and output
-+		   buffers can be *the same* memory area. Therefore we don't
-+		   need to use a temporary buffer. But be careful - other
-+		   implementations don't have to be so nice.
-+		   I used to use ibuf as temporary buffer here, but it led
-+		   packet sniffers into error. Thanks to Wilfried Weissmann
-+		   for pointing that. */
-+		arc4_encrypt(state, wptr, complen, wptr);
-+		olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2);
-+		(state->stats).comp_bytes += olen;
-+		(state->stats).comp_packets++;
-+	    }
-+	}
-+    }
-+
-+    /* write status bits and coherency counter into the output buffer */
-+    wptr = obuf + PPP_HDRLEN;
-+    wptr[0] = MPPE_CTRLHI(state);
-+    wptr[1] = MPPE_CTRLLO(state);
-+
-+    state->bits = 0;
-+
-+    (state->stats).unc_bytes += isize;
-+    (state->stats).unc_packets++;
-+
-+    return olen;
-+}
-+
-+/***************************/
-+/*** Decompression stuff ***/
-+/***************************/
-+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l)
-+{
-+    static const u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff};
-+    u32 res, ol;
-+
-+    ol = *l;
-+    if (*l >= n) {
-+	*l = (*l) - n;
-+	res = (buf[*i] & m[ol]) >> (*l);
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	}
-+    } else {
-+	*l = 8 - n + (*l);
-+	res = (buf[(*i)++] & m[ol]) << 8;
-+	res = (res | buf[*i]) >> (*l);
-+    }
-+
-+    return res;
-+}
-+
-+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l)
-+{
-+    if (l == 8) {
-+	return buf[i];
-+    } else {
-+	return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff;
-+    }
-+}
-+
-+static inline void lamecopy(u8 *dst, u8 *src, u32 len)
-+{
-+    while (len--)
-+	*dst++ = *src++;
-+}
-+
-+static int
-+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+		unsigned char *obuf, int isize, int osize)
-+{
-+    u32 olen, off, len, bits, val, sig, i, l;
-+    u8 *history, *s;
-+
-+    history = state->hist + state->histptr;
-+    olen = len = i = 0;
-+    l = 8;
-+    bits = isize * 8;
-+    while (bits >= 8) {
-+	val = getbyte(ibuf, i++, l);
-+	if (val < 0x80) {		/* literal byte < 0x80 */
-+	    if (state->histptr < 2*MPPE_HIST_LEN) {
-+		/* copy uncompressed byte to the history */
-+		(state->hist)[(state->histptr)++] = (u8) val;
-+	    } else {
-+		/* buffer overflow; drop packet */
-+		if (state->debug)
-+		    printk(KERN_ERR "%s%d: trying to write outside history "
-+			   "buffer\n", __FUNCTION__, state->unit);
-+		return DECOMP_ERROR;
-+	    }
-+	    olen++;
-+	    bits -= 8;
-+	    continue;
-+	}
-+
-+	sig = val & 0xc0;
-+	if (sig == 0x80) {		/* literal byte >= 0x80 */
-+	    if (state->histptr < 2*MPPE_HIST_LEN) {
-+		/* copy uncompressed byte to the history */
-+		(state->hist)[(state->histptr)++] = 
-+		    (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l));
-+	    } else {
-+		/* buffer overflow; drop packet */
-+		if (state->debug)
-+		    printk(KERN_ERR "%s%d: trying to write outside history "
-+			   "buffer\n", __FUNCTION__, state->unit);
-+		return DECOMP_ERROR;
-+	    }
-+	    olen++;
-+	    bits -= 9;
-+	    continue;
-+	}
-+
-+	/* Not a literal byte so it must be an (offset,length) pair */
-+	/* decode offset */
-+	sig = val & 0xf0;
-+	if (sig == 0xf0) {		/* 10-bit offset; 0 <= offset < 64 */
-+	    off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l));
-+	    bits -= 10;
-+	} else {
-+	    if (sig == 0xe0) {		/* 12-bit offset; 64 <= offset < 320 */
-+		off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64);
-+		bits -= 12;
-+	    } else {
-+		if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */
-+		    off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320);
-+		    bits -= 16;
-+		    if (off > MPPE_HIST_LEN - 1) {
-+			if (state->debug)
-+			    printk(KERN_DEBUG "%s%d: too big offset value: %d\n",
-+				   __FUNCTION__, state->unit, off);
-+			return DECOMP_ERROR;
-+		    }
-+		} else {		/* this shouldn't happen */
-+		    if (state->debug)
-+			printk(KERN_DEBUG "%s%d: cannot decode offset value\n",
-+			       __FUNCTION__, state->unit);
-+		    return DECOMP_ERROR;
-+		}
-+	    }
-+	}
-+	/* decode length of match */
-+	val = getbyte(ibuf, i, l);
-+	if ((val & 0x80) == 0x00) {			/* len = 3 */
-+	    len = 3;
-+	    bits--;
-+	    getbits(ibuf, 1 , &i ,&l);
-+	} else if ((val & 0xc0) == 0x80) {		/* 4 <= len < 8 */
-+	    len = 0x04 | ((val>>4) & 0x03);
-+	    bits -= 4;
-+	    getbits(ibuf, 4 , &i ,&l);
-+	} else if ((val & 0xe0) == 0xc0) {		/* 8 <= len < 16 */
-+	    len = 0x08 | ((val>>2) & 0x07);
-+	    bits -= 6;
-+	    getbits(ibuf, 6 , &i ,&l);
-+	} else if ((val & 0xf0) == 0xe0) {		/* 16 <= len < 32 */
-+	    len = 0x10 | (val & 0x0f);
-+	    bits -= 8;
-+	    i++;
-+	} else {
-+	    bits -= 8;
-+	    val = (val << 8) | getbyte(ibuf, ++i, l);
-+	    if ((val & 0xf800) == 0xf000) {		/* 32 <= len < 64 */
-+		len = 0x0020 | ((val >> 6) & 0x001f);
-+		bits -= 2;
-+		getbits(ibuf, 2 , &i ,&l);
-+	    } else if ((val & 0xfc00) == 0xf800) {	/* 64 <= len < 128 */
-+		len = 0x0040 | ((val >> 4) & 0x003f);
-+		bits -= 4;
-+		getbits(ibuf, 4 , &i ,&l);
-+	    } else if ((val & 0xfe00) == 0xfc00) {	/* 128 <= len < 256 */
-+		len = 0x0080 | ((val >> 2) & 0x007f);
-+		bits -= 6;
-+		getbits(ibuf, 6 , &i ,&l);
-+	    } else if ((val & 0xff00) == 0xfe00) {	/* 256 <= len < 512 */
-+		len = 0x0100 | (val & 0x00ff);
-+		bits -= 8;
-+		i++;
-+	    } else {
-+		bits -= 8;
-+		val = (val << 8) | getbyte(ibuf, ++i, l);
-+		if ((val & 0xff8000) == 0xff0000) {	/* 512 <= len < 1024 */
-+		    len = 0x000200 | ((val >> 6) & 0x0001ff);
-+		    bits -= 2;
-+		    getbits(ibuf, 2 , &i ,&l);
-+		} else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */
-+		    len = 0x000400 | ((val >> 4) & 0x0003ff);
-+		    bits -= 4;
-+		    getbits(ibuf, 4 , &i ,&l);
-+		} else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */
-+		    len = 0x000800 | ((val >> 2) & 0x0007ff);
-+		    bits -= 6;
-+		    getbits(ibuf, 6 , &i ,&l);
-+		} else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */
-+		    len = 0x001000 | (val & 0x000fff);
-+		    bits -= 8;
-+		    i++;
-+		} else {				/* this shouldn't happen */
-+		    if (state->debug)
-+			printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n",
-+			       __FUNCTION__, state->unit, val);
-+		    return DECOMP_ERROR;
-+		}
-+	    }
-+	}
-+	s = state->hist + state->histptr;
-+	state->histptr += len;
-+	olen += len;
-+	if (state->histptr < 2*MPPE_HIST_LEN) {
-+	    /* copy uncompressed bytes to the history */
-+
-+	    /* In some cases len may be greater than off. It means that memory
-+	     * areas pointed by s and s-off overlap. I had used memmove() here
-+	     * because I thought that it acts as libc's version. Unfortunately,
-+	     * I was wrong. :-) I got strange errors sometimes. Wilfried suggested
-+	     * using of byte by byte copying here and strange errors disappeared.
-+	     */
-+	    lamecopy(s, s - off, len);
-+	} else {
-+	    /* buffer overflow; drop packet */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: trying to write outside history "
-+		       "buffer\n", __FUNCTION__, state->unit);
-+	    return DECOMP_ERROR;
-+	}
-+    }
-+
-+    /* Do PFC decompression */
-+    len = olen;
-+    if ((history[0] & 0x01) != 0) {
-+	obuf[0] = 0;
-+	obuf++;
-+	len++;
-+    }
-+
-+    if (len <= osize) {
-+	/* copy uncompressed packet to the output buffer */
-+	memcpy(obuf, history, olen);
-+    } else {
-+	/* buffer overflow; drop packet */
-+	if (state->debug)
-+	    printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n",
-+		   __FUNCTION__, state->unit, len + (PPP_HDRLEN / 2));
-+	return DECOMP_ERROR;
-+    }
-+
-+    return (int) len;
-+}
-+
-+int
-+mppe_decompress(void *arg, unsigned char *ibuf, int isize,
-+		unsigned char *obuf, int osize)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+    int seq, bits, uncomplen;
-+
-+    if (isize <= PPP_HDRLEN + MPPE_OVHD) {
-+	if (state->debug) {
-+	    printk(KERN_DEBUG "%s%d: short packet (len=%d)\n",  __FUNCTION__,
-+		   state->unit, isize);
-+	}
-+	return DECOMP_ERROR;
-+    }
-+
-+    /* Get coherency counter and control bits from input buffer */
-+    seq = MPPE_CCOUNT(ibuf);
-+    bits = MPPE_BITS(ibuf);
-+
-+    if (state->stateless) {
-+	/* RFC 3078, sec 8.1. */
-+	mppe_increase_ccount(state);
-+	if ((seq != state->ccount) && state->debug)
-+	    printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+		   __FUNCTION__, state->unit, seq, state->ccount);
-+	while (seq != state->ccount)
-+	    mppe_increase_ccount(state);
-+    } else {
-+	/* RFC 3078, sec 8.2. */
-+	if (state->flushexpected) { /* discard state */
-+	    if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */
-+		while (seq != state->ccount)
-+		    mppe_increase_ccount(state);
-+		state->flushexpected = 0;
-+	    } else /* drop packet*/
-+		return DECOMP_ERROR;
-+	} else { /* normal state */
-+	    mppe_increase_ccount(state);
-+	    if (seq != state->ccount) {
-+		/* Packet loss detected, enter the discard state. */
-+		if (state->debug)
-+		    printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+			   __FUNCTION__, state->unit, seq, state->ccount);
-+		state->flushexpected = 1;
-+		return DECOMP_ERROR;
-+	    }
-+	}
-+	if (state->mppe && (bits & MPPE_BIT_FLUSHED)) {
-+	    arc4_setkey(state, state->session_key, state->keylen);
-+	}
-+    }
-+
-+    if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) {
-+	state->histptr = MPPE_HIST_LEN;
-+	if ((bits & MPPE_BIT_FLUSHED)) {
-+	    memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+	} else
-+	    if ((bits & MPPE_BIT_RESET)) {
-+		memcpy(state->hist, state->hist + MPPE_HIST_LEN, MPPE_HIST_LEN);
-+	    }
-+    }
-+
-+    /* Fill in the first part of the PPP header. The protocol field
-+       comes from the decompressed data. */
-+    obuf[0] = PPP_ADDRESS(ibuf);
-+    obuf[1] = PPP_CONTROL(ibuf);
-+    obuf += PPP_HDRLEN / 2;
-+
-+    if (state->mppe) { /* process encrypted packet */
-+	if ((bits & MPPE_BIT_ENCRYPTED)) {
-+	    /* OK, packet encrypted, so decrypt it */
-+	    if (state->mppc && (bits & MPPE_BIT_COMP)) {
-+		/* Hack warning !!! RC4 implementation which we use does
-+		   decryption "in place" - it means that input and output
-+		   buffers can be *the same* memory area. Therefore we don't
-+		   need to use a temporary buffer. But be careful - other
-+		   implementations don't have to be so nice. */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2), isize -
-+			     PPP_HDRLEN - (MPPE_OVHD / 2), ibuf + PPP_HDRLEN +
-+			     (MPPE_OVHD / 2));
-+		uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN +
-+					    (MPPE_OVHD / 2), obuf, isize -
-+					    PPP_HDRLEN - (MPPE_OVHD / 2),
-+					    osize - (PPP_HDRLEN / 2));
-+		if (uncomplen == DECOMP_ERROR) {
-+		    state->flushexpected = 1;
-+		    return DECOMP_ERROR;
-+		}
-+		uncomplen += PPP_HDRLEN / 2;
-+		(state->stats).comp_bytes += isize;
-+		(state->stats).comp_packets++;
-+	    } else {
-+		uncomplen = isize - MPPE_OVHD;
-+		/* Decrypt the first byte in order to check if it is
-+		   compressed or uncompressed protocol field */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2), 1, obuf);
-+		/* Do PFC decompression */
-+		if ((obuf[0] & 0x01) != 0) {
-+		    obuf[1] = obuf[0];
-+		    obuf[0] = 0;
-+		    obuf++;
-+		    uncomplen++;
-+		}
-+		/* And finally, decrypt the rest of the frame. */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2) + 1,
-+			     isize - PPP_HDRLEN - (MPPE_OVHD / 2) - 1, obuf + 1);
-+		(state->stats).inc_bytes += isize;
-+		(state->stats).inc_packets++;
-+	    }
-+	} else { /* this shouldn't happen */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: encryption negotiated but not an "
-+		       "encrypted packet received\n", __FUNCTION__, state->unit);
-+	    mppe_change_key(state, 0);
-+	    state->flushexpected = 1;
-+	    return DECOMP_ERROR;
-+	}
-+    } else {
-+	if (state->mppc) { /* no MPPE, only MPPC */
-+	    if ((bits & MPPE_BIT_COMP)) {
-+		uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN +
-+					    (MPPE_OVHD / 2), obuf, isize -
-+					    PPP_HDRLEN - (MPPE_OVHD / 2),
-+					    osize - (PPP_HDRLEN / 2));
-+		if (uncomplen == DECOMP_ERROR) {
-+		    state->flushexpected = 1;
-+		    return DECOMP_ERROR;
-+		}
-+		uncomplen += PPP_HDRLEN / 2;
-+		(state->stats).comp_bytes += isize;
-+		(state->stats).comp_packets++;
-+	    } else {
-+		memcpy(obuf, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize -
-+		       PPP_HDRLEN - (MPPE_OVHD / 2));
-+		uncomplen = isize - MPPE_OVHD;
-+		(state->stats).inc_bytes += isize;
-+		(state->stats).inc_packets++;
-+	    }
-+	} else { /* this shouldn't happen */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: error - not an  MPPC or MPPE frame "
-+		       "received\n", __FUNCTION__, state->unit);
-+	    state->flushexpected = 1;
-+	    return DECOMP_ERROR;
-+	}
-+    }
-+
-+    (state->stats).unc_bytes += uncomplen;
-+    (state->stats).unc_packets++;
-+
-+    return uncomplen;
-+}
-+
-+
-+/************************************************************
-+ * Module interface table
-+ ************************************************************/
-+
-+/* These are in ppp_generic.c */
-+extern int  ppp_register_compressor   (struct compressor *cp);
-+extern void ppp_unregister_compressor (struct compressor *cp);
-+
-+/*
-+ * Functions exported to ppp_generic.c.
-+ *
-+ * In case of MPPC/MPPE there is no need to process incompressible data
-+ * because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp)
-+ * callback function isn't needed.
-+ */
-+struct compressor ppp_mppe = {
-+    .compress_proto =	CI_MPPE,
-+    .comp_alloc =	mppe_comp_alloc,
-+    .comp_free =	mppe_comp_free,
-+    .comp_init =	mppe_comp_init,
-+    .comp_reset =	mppe_comp_reset,
-+    .compress =		mppe_compress,
-+    .comp_stat =	mppe_stats,
-+    .decomp_alloc =	mppe_decomp_alloc,
-+    .decomp_free =	mppe_comp_free,
-+    .decomp_init =	mppe_decomp_init,
-+    .decomp_reset =	mppe_decomp_reset,
-+    .decompress =	mppe_decompress,
-+    .incomp =		NULL,
-+    .decomp_stat =	mppe_stats,
-+    .owner =		THIS_MODULE
-+};
-+
-+/************************************************************
-+ * Module support routines
-+ ************************************************************/
-+
-+int __init mppe_module_init(void)
-+{
-+    int answer;
-+
-+    if (!(crypto_alg_available("arc4", 0) && crypto_alg_available("sha1", 0))) {
-+	printk(KERN_ERR "Kernel doesn't provide ARC4 and/or SHA1 algorithms "
-+	       "required by MPPE/MPPC. Check CryptoAPI configuration.\n");
-+	return -ENODEV;
-+    }
-+
-+    /* Allocate space for SHAPad1, SHAPad2 and ... */
-+    sha_pad = kmalloc(sizeof(struct sha_pad), GFP_KERNEL);
-+    if (sha_pad == NULL)
-+	return -ENOMEM;
-+    /* ... initialize them */
-+    memset(sha_pad->sha_pad1, 0x00, sizeof(sha_pad->sha_pad1));
-+    memset(sha_pad->sha_pad2, 0xf2, sizeof(sha_pad->sha_pad2));
-+
-+    answer = ppp_register_compressor(&ppp_mppe);
-+    if (answer == 0) {
-+	printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n");
-+    }
-+    return answer;
-+}
-+
-+void __exit mppe_module_cleanup(void)
-+{
-+    kfree(sha_pad);
-+    ppp_unregister_compressor(&ppp_mppe);
-+    printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n");
-+}
-+
-+module_init(mppe_module_init);
-+module_exit(mppe_module_cleanup);
-+
-+MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>");
-+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux");
-+MODULE_VERSION("1.2");
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
-diff -ruN linux-2.6.12.orig/include/linux/ppp-comp.h linux-2.6.12/include/linux/ppp-comp.h
---- linux-2.6.12.orig/include/linux/ppp-comp.h	2004-12-24 22:33:47.000000000 +0100
-+++ linux-2.6.12/include/linux/ppp-comp.h	2005-06-28 20:07:01.000000000 +0200
-@@ -28,7 +28,7 @@
-  */
- 
- /*
-- *  ==FILEVERSION 980319==
-+ *  ==FILEVERSION 20040509==
-  *
-  *  NOTE TO MAINTAINERS:
-  *     If you modify this file at all, please set the above date.
-@@ -80,7 +80,7 @@
- 
- 	/* Compress a packet */
- 	int     (*compress) (void *state, unsigned char *rptr,
--			      unsigned char *obuf, int isize, int osize);
-+			     unsigned char *obuf, int isize, int osize);
- 
- 	/* Return compression statistics */
- 	void	(*comp_stat) (void *state, struct compstat *stats);
-@@ -101,7 +101,7 @@
- 
- 	/* Decompress a packet. */
- 	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
--				unsigned char *obuf, int osize);
-+			       unsigned char *obuf, int osize);
- 
- 	/* Update state for an incompressible packet received */
- 	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
-@@ -191,6 +191,42 @@
- #define DEFLATE_CHK_SEQUENCE	0
- 
- /*
-+ * Definitions for MPPE/MPPC.
-+ */
-+
-+#define CI_MPPE			18	/* config option for MPPE */
-+#define CILEN_MPPE		6	/* length of config option */
-+
-+#define MPPE_OVHD		4	/* MPPE overhead */
-+#define MPPE_MAX_KEY_LEN	16	/* largest key length (128-bit) */
-+
-+#define MPPE_STATELESS          0x01	/* configuration bit H */
-+#define MPPE_40BIT              0x20	/* configuration bit L */
-+#define MPPE_56BIT              0x80	/* configuration bit M */
-+#define MPPE_128BIT             0x40	/* configuration bit S */
-+#define MPPE_MPPC               0x01	/* configuration bit C */
-+
-+/*
-+ * Definitions for Stac LZS.
-+ */
-+
-+#define CI_LZS			17	/* config option for Stac LZS */
-+#define CILEN_LZS		5	/* length of config option */
-+
-+#define LZS_OVHD		4	/* max. LZS overhead */
-+#define LZS_HIST_LEN		2048	/* LZS history size */
-+#define LZS_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
-+
-+#define LZS_MODE_NONE		0
-+#define LZS_MODE_LCB		1
-+#define LZS_MODE_CRC		2
-+#define LZS_MODE_SEQ		3
-+#define LZS_MODE_EXT		4
-+
-+#define LZS_EXT_BIT_FLUSHED	0x80	/* bit A */
-+#define LZS_EXT_BIT_COMP	0x20	/* bit C */
-+
-+/*
-  * Definitions for other, as yet unsupported, compression methods.
-  */
- 
diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/ppc_40x_uboot.patch b/packages/linux/linux-dht-walnut-2.6.12.6/ppc_40x_uboot.patch
deleted file mode 100644
index fcb700c5b4..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12.6/ppc_40x_uboot.patch
+++ /dev/null
@@ -1,693 +0,0 @@
-diff-tree 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 (from 90eb2665841d7b444602736e2141a01c948f75b1)

-Author: Matt Porter <mporter@kernel.crashing.org>

-Date:   Mon Nov 7 00:58:15 2005 -0800

-

-    [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot

-    

-    Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot

-    as bootloader.  The OpenBIOS bd_info struct is not used in the kernel

-    anymore (only U-Boot now).

-    

-    uImage (U-Boot) tested on walnut, sycamore and bubinga

-    zImage (OpenBIOS) tested on sycamore, bubinga and ebony

-    

-    Signed-off-by: Stefan Roese <sr@denx.de>

-    Signed-off-by: Matt Porter <mporter@kernel.crashing.org>

-    Signed-off-by: Andrew Morton <akpm@osdl.org>

-    Signed-off-by: Linus Torvalds <torvalds@osdl.org>

-

-diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile

-index ff0904e..82df88b 100644

---- a/arch/ppc/boot/simple/Makefile

-+++ b/arch/ppc/boot/simple/Makefile

-@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO)		:= zImage

-   entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000

-      extra.o-$(CONFIG_BAMBOO)		:= pibs.o

- 

-+      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE

-+zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE

-+         end-$(CONFIG_BUBINGA)		:= bubinga

-+  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000

-+     extra.o-$(CONFIG_BUBINGA)		:= openbios.o

-+

-       zimage-$(CONFIG_EBONY)		:= zImage-TREE

- zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE

-          end-$(CONFIG_EBONY)		:= ebony

-@@ -91,6 +97,18 @@ zimageinitrd-$(CONFIG_OCOTEA)		:= zImage

-   entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000

-      extra.o-$(CONFIG_OCOTEA)		:= pibs.o

- 

-+      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE

-+zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE

-+         end-$(CONFIG_SYCAMORE)		:= sycamore

-+  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000

-+     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o

-+

-+      zimage-$(CONFIG_WALNUT)		:= zImage-TREE

-+zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE

-+         end-$(CONFIG_WALNUT)		:= walnut

-+  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000

-+     extra.o-$(CONFIG_WALNUT)		:= openbios.o

-+

-      extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o

-          end-$(CONFIG_EV64260)		:= ev64260

-    cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)

-@@ -168,7 +186,8 @@ OBJCOPY_ARGS			:= -O elf32-powerpc

- 

- # head.o and relocate.o must be at the start.

- boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)

--boot-$(CONFIG_40x)		+= embed_config.o

-+boot-$(CONFIG_REDWOOD_5)	+= embed_config.o

-+boot-$(CONFIG_REDWOOD_6)	+= embed_config.o

- boot-$(CONFIG_8xx)		+= embed_config.o

- boot-$(CONFIG_8260)		+= embed_config.o

- boot-$(CONFIG_BSEIP)		+= iic.o

-diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c

-index e02de5b..f415d6c 100644

---- a/arch/ppc/boot/simple/misc.c

-+++ b/arch/ppc/boot/simple/misc.c

-@@ -23,7 +23,7 @@

- #include <asm/page.h>

- #include <asm/mmu.h>

- #include <asm/bootinfo.h>

--#ifdef CONFIG_44x

-+#ifdef CONFIG_4xx

- #include <asm/ibm4xx.h>

- #endif

- #include <asm/reg.h>

-@@ -88,6 +88,14 @@ get_mem_size(void)

- 	return 0;

- }

- 

-+#if defined(CONFIG_40x)

-+#define PPC4xx_EMAC0_MR0	EMAC0_BASE

-+#endif

-+

-+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)

-+#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0

-+#endif

-+

- struct bi_record *

- decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)

- {

-@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_add

- 	com_port = serial_init(0, NULL);

- #endif

- 

--#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)

-+#if defined(PPC4xx_EMAC0_MR0)

- 	/* Reset MAL */

- 	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);

- 	/* Wait for reset */

- 	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};

- 	/* Reset EMAC */

--	*(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;

-+	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;

- 	__asm__ __volatile__("eieio");

- #endif

- 

-@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_add

- 		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");

- 	}

- 

-+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */

- 	avail_ram = (char *)0x00400000;

-+#endif

- 	end_avail = (char *)0x00800000;

- 	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");

- 	puthex((unsigned long)end_avail); puts("\n");

-diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c

-index c732b6d..81f11d8 100644

---- a/arch/ppc/boot/simple/openbios.c

-+++ b/arch/ppc/boot/simple/openbios.c

-@@ -1,19 +1,43 @@

- /*

-  * arch/ppc/boot/simple/openbios.c

-  *

-- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-+ *

-+ * Based on original work by

-+ *      2005 (c) SYSGO AG - g.jaeger@sysgo.com

-+ *

-  * This file is licensed under the terms of the GNU General Public

-  * License version 2.  This program is licensed "as is" without

-  * any warranty of any kind, whether express or implied.

-  *

-- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)

-  */

- 

- #include <linux/types.h>

- #include <linux/config.h>

- #include <linux/string.h>

- #include <asm/ppcboot.h>

--#include <platforms/4xx/ebony.h>

-+#include <asm/ibm4xx.h>

-+#include <asm/reg.h>

-+#ifdef CONFIG_40x

-+#include <asm/io.h>

-+#endif

-+

-+#if defined(CONFIG_BUBINGA)

-+#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */

-+#else

-+#define BOARD_INFO_VECTOR	0xFFFE0B50

-+#endif

-+

-+#ifdef CONFIG_40x

-+/* Supply a default Ethernet address for those eval boards that don't

-+ * ship with one.  This is an address from the MBX board I have, so

-+ * it is unlikely you will find it on your network.

-+ */

-+static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };

-+

-+extern unsigned long timebase_period_ns;

-+#endif /* CONFIG_40x */

- 

- extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,

- 				       unsigned long cksum);

-@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(u

- bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));

- bd_t *hold_residual = &hold_resid_buf;

- 

-+typedef struct openbios_board_info {

-+        unsigned char    bi_s_version[4];       /* Version of this structure */

-+        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */

-+        unsigned int     bi_memsize;            /* DRAM installed, in bytes */

-+#ifdef CONFIG_405EP

-+        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */

-+#else /* CONFIG_405EP */

-+        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */

-+#endif /* CONFIG_405EP */

-+        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */

-+        unsigned int     bi_intfreq;            /* Processor speed, in Hz */

-+        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */

-+        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */

-+#ifdef CONFIG_405EP

-+        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */

-+        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */

-+#endif /* CONFIG_405EP */

-+} openbios_bd_t;

-+

- void *

- load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,

- 		void *ign1, void *ign2)

- {

--	decompress_kernel(load_addr, num_words, cksum);

-+#ifdef CONFIG_40x

-+	openbios_bd_t *openbios_bd = NULL;

-+	openbios_bd_t *(*get_board_info)(void) =

-+		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);

-+

-+	/*

-+	 * On 40x platforms we not only need the MAC-addresses, but also the

-+	 * clocks and memsize. Now try to get all values using the OpenBIOS

-+	 * "get_board_info()" callback.

-+	 */

-+	if ((openbios_bd = get_board_info()) != NULL) {

-+		/*

-+		 * Copy bd_info from OpenBIOS struct into U-Boot struct

-+		 * used by kernel

-+		 */

-+	        hold_residual->bi_memsize = openbios_bd->bi_memsize;

-+	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;

-+	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;

-+	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;

-+		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);

-+#ifdef CONFIG_405EP

-+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);

-+		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);

-+	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;

-+	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;

-+#else /* CONFIG_405EP */

-+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);

-+#endif /* CONFIG_405EP */

-+	} else {

-+		/* Hmmm...better try to stuff some defaults.

-+		 */

-+		hold_residual->bi_memsize = 16 * 1024 * 1024;

-+		hold_residual->bi_intfreq = 200000000;

-+		hold_residual->bi_busfreq = 100000000;

-+		hold_residual->bi_pci_busfreq = 66666666;

-+

-+		/*

-+		 * Only supply one mac-address in this fallback

-+		 */

-+		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);

-+#ifdef CONFIG_405EP

-+	        hold_residual->bi_opbfreq = 50000000;

-+	        hold_residual->bi_procfreq = 200000000;

-+#endif /* CONFIG_405EP */

-+	}

-+

-+	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;

-+#endif /* CONFIG_40x */

- 

-+#ifdef CONFIG_440GP

- 	/* simply copy the MAC addresses */

--	memcpy(hold_residual->bi_enetaddr,  (char *)EBONY_OPENBIOS_MAC_BASE, 6);

--	memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);

-+	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);

-+	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);

-+#endif /* CONFIG_440GP */

-+

-+	decompress_kernel(load_addr, num_words, cksum);

- 

- 	return (void *)hold_residual;

- }

-diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig

-index e70e4c6..d883791 100644

---- a/arch/ppc/platforms/4xx/Kconfig

-+++ b/arch/ppc/platforms/4xx/Kconfig

-@@ -225,7 +225,7 @@ config EMBEDDEDBOOT

- 

- config IBM_OPENBIOS

- 	bool

--	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT

-+	depends on ASH || REDWOOD_5 || REDWOOD_6

- 	default y

- 

- config PPC4xx_DMA

-diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c

-index 3678abf..8110f55 100644

---- a/arch/ppc/platforms/4xx/bubinga.c

-+++ b/arch/ppc/platforms/4xx/bubinga.c

-@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)

-           * by 16.

-           */

- 	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);

--	uart_clock = __res.bi_pllouta_freq / uart_div;

-+	uart_clock = __res.bi_procfreq / uart_div;

- 

- 	/* Setup serial port access */

- 	memset(&port, 0, sizeof(port));

-diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h

-index b1df856..b5380cf 100644

---- a/arch/ppc/platforms/4xx/bubinga.h

-+++ b/arch/ppc/platforms/4xx/bubinga.h

-@@ -1,52 +1,34 @@

- /*

-- * Support for IBM PPC 405EP evaluation board (Bubinga).

-+ * arch/ppc/platforms/4xx/bubinga.h

-  *

-- * Author: SAW (IBM), derived from walnut.h.

-- *         Maintained by MontaVista Software <source@mvista.com>

-+ * Bubinga board definitions

-+ *

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-+ *

-+ * Based on original work by

-+ *	SAW (IBM)

-+ *	2003 (c) MontaVista Softare Inc.

-+ *

-+ * This program is free software; you can redistribute  it and/or modify it

-+ * under  the terms of  the GNU General  Public License as published by the

-+ * Free Software Foundation;  either version 2 of the  License, or (at your

-+ * option) any later version.

-  *

-- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the

-- * terms of the GNU General Public License version 2. This program is

-- * licensed "as is" without any warranty of any kind, whether express

-- * or implied.

-  */

- 

- #ifdef __KERNEL__

- #ifndef __BUBINGA_H__

- #define __BUBINGA_H__

- 

--/* 405EP */

-+#include <linux/config.h>

- #include <platforms/4xx/ibm405ep.h>

--

--#ifndef __ASSEMBLY__

--/*

-- * Data structure defining board information maintained by the boot

-- * ROM on IBM's evaluation board. An effort has been made to

-- * keep the field names consistent with the 8xx 'bd_t' board info

-- * structures.

-- */

--

--typedef struct board_info {

--        unsigned char    bi_s_version[4];       /* Version of this structure */

--        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */

--        unsigned int     bi_memsize;            /* DRAM installed, in bytes */

--        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */

--        unsigned int     bi_intfreq;            /* Processor speed, in Hz */

--        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */

--        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */

--        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */

--        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */

--} bd_t;

--

--/* Some 4xx parts use a different timebase frequency from the internal clock.

--*/

--#define bi_tbfreq bi_intfreq

--

-+#include <asm/ppcboot.h>

- 

- /* Memory map for the Bubinga board.

-  * Generic 4xx plus RTC.

-  */

- 

--extern void *bubinga_rtc_base;

- #define BUBINGA_RTC_PADDR	((uint)0xf0000000)

- #define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR

- #define BUBINGA_RTC_SIZE	((uint)8*1024)

-@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;

-  * for typical configurations at various CPU speeds.

-  * The base baud is calculated as (FWDA / EXT UART DIV / 16)

-  */

--#define BASE_BAUD       0

-+#define BASE_BAUD		0

- 

--#define BUBINGA_FPGA_BASE      0xF0300000

-+/* Flash */

-+#define PPC40x_FPGA_BASE	0xF0300000

-+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */

-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)

-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)

-+#define PPC40x_FLASH_LOW	0xFFF00000

-+#define PPC40x_FLASH_HIGH	0xFFF80000

-+#define PPC40x_FLASH_SIZE	0x80000

- 

--#define PPC4xx_MACHINE_NAME     "IBM Bubinga"

-+#define PPC4xx_MACHINE_NAME	"IBM Bubinga"

- 

--#endif /* !__ASSEMBLY__ */

- #endif /* __BUBINGA_H__ */

- #endif /* __KERNEL__ */

-diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h

-index d08faa4..b91ad42 100644

---- a/arch/ppc/platforms/4xx/ebony.h

-+++ b/arch/ppc/platforms/4xx/ebony.h

-@@ -24,8 +24,8 @@

- #define PPC44x_EMAC0_MR0	0xE0000800

- 

- /* Where to find the MAC info */

--#define EBONY_OPENBIOS_MAC_BASE   0xfffffe0c

--#define EBONY_OPENBIOS_MAC_OFFSET 0x0c

-+#define OPENBIOS_MAC_BASE	0xfffffe0c

-+#define OPENBIOS_MAC_OFFSET	0x0c

- 

- /* Default clock rates for Rev. B and Rev. C silicon */

- #define EBONY_440GP_RB_SYSCLK	33000000

-diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c

-index d8019ee..281b4a2 100644

---- a/arch/ppc/platforms/4xx/sycamore.c

-+++ b/arch/ppc/platforms/4xx/sycamore.c

-@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsi

- void __init

- sycamore_setup_arch(void)

- {

--#define SYCAMORE_PS2_BASE	0xF0100000

--#define SYCAMORE_FPGA_BASE	0xF0300000

--

- 	void *fpga_brdc;

- 	unsigned char fpga_brdc_data;

- 	void *fpga_enable;

-@@ -100,7 +97,7 @@ sycamore_setup_arch(void)

- 

- 	ppc4xx_setup_arch();

- 

--	ibm_ocp_set_emac(0, 1);

-+	ibm_ocp_set_emac(0, 0);

- 

- 	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);

- 	if (!kb_data) {

-@@ -111,7 +108,7 @@ sycamore_setup_arch(void)

- 

- 	kb_cs = kb_data + 1;

- 

--	fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);

-+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);

- 	if (!fpga_status) {

- 		printk(KERN_CRIT

- 		       "sycamore_setup_arch() fpga_status ioremap failed\n");

-diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h

-index 3e7b4e2..1cd6c82 100644

---- a/arch/ppc/platforms/4xx/sycamore.h

-+++ b/arch/ppc/platforms/4xx/sycamore.h

-@@ -1,67 +1,52 @@

- /*

-  * arch/ppc/platforms/4xx/sycamore.h

-  *

-- * Macros, definitions, and data structures specific to the IBM PowerPC

-- * 405GPr "Sycamore" evaluation board.

-+ * Sycamore board definitions

-  *

-- * Author: Armin Kuster <akuster@mvista.com>

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-+ *

-+ * Based on original work by

-+ * 	Armin Kuster <akuster@mvista.com>

-+ *	2000 (c) MontaVista, Software, Inc.

-+ *

-+ * This program is free software; you can redistribute  it and/or modify it

-+ * under  the terms of  the GNU General  Public License as published by the

-+ * Free Software Foundation;  either version 2 of the  License, or (at your

-+ * option) any later version.

-  *

-- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under

-- * the terms of the GNU General Public License version 2.  This program

-- * is licensed "as is" without any warranty of any kind, whether express

-- * or implied.

-  */

- 

- #ifdef __KERNEL__

- #ifndef __ASM_SYCAMORE_H__

- #define __ASM_SYCAMORE_H__

- 

-+#include <linux/config.h>

- #include <platforms/4xx/ibm405gpr.h>

-+#include <asm/ppcboot.h>

- 

--#ifndef __ASSEMBLY__

--/*

-- * Data structure defining board information maintained by the boot

-- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to

-- * keep the field names consistent with the 8xx 'bd_t' board info

-- * structures.

-- */

--

--typedef struct board_info {

--	unsigned char	 bi_s_version[4];	/* Version of this structure */

--	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */

--	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */

--	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */

--	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */

--	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */

--	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */

--	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */

--} bd_t;

--

--/* Some 4xx parts use a different timebase frequency from the internal clock.

--*/

--#define bi_tbfreq bi_intfreq

--

--

--/* Memory map for the IBM "Sycamore" 405GP evaluation board.

-+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.

-  * Generic 4xx plus RTC.

-  */

- 

--extern void *sycamore_rtc_base;

- #define SYCAMORE_RTC_PADDR	((uint)0xf0000000)

- #define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR

--#define SYCAMORE_RTC_SIZE		((uint)8*1024)

-+#define SYCAMORE_RTC_SIZE	((uint)8*1024)

- 

--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK

--#define BASE_BAUD		201600

--#else

- #define BASE_BAUD		691200

--#endif

- 

--#define SYCAMORE_PS2_BASE		0xF0100000

--#define SYCAMORE_FPGA_BASE	0xF0300000

-+#define SYCAMORE_PS2_BASE	0xF0100000

-+

-+/* Flash */

-+#define PPC40x_FPGA_BASE	0xF0300000

-+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */

-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)

-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)

-+#define PPC40x_FLASH_LOW	0xFFF00000

-+#define PPC40x_FLASH_HIGH	0xFFF80000

-+#define PPC40x_FLASH_SIZE	0x80000

- 

- #define PPC4xx_MACHINE_NAME	"IBM Sycamore"

- 

--#endif /* !__ASSEMBLY__ */

- #endif /* __ASM_SYCAMORE_H__ */

- #endif /* __KERNEL__ */

-diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c

-index a33eda4..74cb331 100644

---- a/arch/ppc/platforms/4xx/walnut.c

-+++ b/arch/ppc/platforms/4xx/walnut.c

-@@ -90,7 +90,7 @@ walnut_setup_arch(void)

- 

- 	kb_cs = kb_data + 1;

- 

--	fpga_status = ioremap(WALNUT_FPGA_BASE, 8);

-+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);

- 	if (!fpga_status) {

- 		printk(KERN_CRIT

- 		       "walnut_setup_arch() fpga_status ioremap failed\n");

-diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h

-index 04cfbf3..dcf2691 100644

---- a/arch/ppc/platforms/4xx/walnut.h

-+++ b/arch/ppc/platforms/4xx/walnut.h

-@@ -1,72 +1,55 @@

- /*

-  * arch/ppc/platforms/4xx/walnut.h

-  *

-- * Macros, definitions, and data structures specific to the IBM PowerPC

-- * 405GP "Walnut" evaluation board.

-+ * Walnut board definitions

-  *

-- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand

-- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or

-- * source@mvista.com

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-  *

-- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>

-+ * Based on original work by

-+ * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>

-+ *	Frank Rowand <frank_rowand@mvista.com>

-+ *	Debbie Chu <debbie_chu@mvista.com>

-+ *	2000 (c) MontaVista, Software, Inc.

-+ *

-+ * This program is free software; you can redistribute  it and/or modify it

-+ * under  the terms of  the GNU General  Public License as published by the

-+ * Free Software Foundation;  either version 2 of the  License, or (at your

-+ * option) any later version.

-  *

-- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under

-- * the terms of the GNU General Public License version 2.  This program

-- * is licensed "as is" without any warranty of any kind, whether express

-- * or implied.

-  */

- 

- #ifdef __KERNEL__

- #ifndef __ASM_WALNUT_H__

- #define __ASM_WALNUT_H__

- 

--/* We have a 405GP core */

-+#include <linux/config.h>

- #include <platforms/4xx/ibm405gp.h>

--

--#ifndef __ASSEMBLY__

--/*

-- * Data structure defining board information maintained by the boot

-- * ROM on IBM's "Walnut" evaluation board. An effort has been made to

-- * keep the field names consistent with the 8xx 'bd_t' board info

-- * structures.

-- */

--

--typedef struct board_info {

--	unsigned char	 bi_s_version[4];	/* Version of this structure */

--	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */

--	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */

--	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */

--	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */

--	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */

--	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */

--	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */

--} bd_t;

--

--/* Some 4xx parts use a different timebase frequency from the internal clock.

--*/

--#define bi_tbfreq bi_intfreq

--

-+#include <asm/ppcboot.h>

- 

- /* Memory map for the IBM "Walnut" 405GP evaluation board.

-  * Generic 4xx plus RTC.

-  */

- 

--extern void *walnut_rtc_base;

- #define WALNUT_RTC_PADDR	((uint)0xf0000000)

- #define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR

- #define WALNUT_RTC_SIZE		((uint)8*1024)

- 

--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK

--#define BASE_BAUD		201600

--#else

- #define BASE_BAUD		691200

--#endif

- 

- #define WALNUT_PS2_BASE		0xF0100000

--#define WALNUT_FPGA_BASE	0xF0300000

-+

-+/* Flash */

-+#define PPC40x_FPGA_BASE	0xF0300000

-+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */

-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)

-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)

-+#define PPC40x_FLASH_LOW	0xFFF00000

-+#define PPC40x_FLASH_HIGH	0xFFF80000

-+#define PPC40x_FLASH_SIZE	0x80000

-+#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE

- 

- #define PPC4xx_MACHINE_NAME	"IBM Walnut"

- 

--#endif /* !__ASSEMBLY__ */

- #endif /* __ASM_WALNUT_H__ */

- #endif /* __KERNEL__ */

-diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h

-index 6f10a25..9c21de1 100644

---- a/include/asm-ppc/ibm_ocp.h

-+++ b/include/asm-ppc/ibm_ocp.h

-@@ -131,9 +131,22 @@ static inline void ibm_ocp_set_emac(int 

- 	/* Copy MAC addresses to EMAC additions */

- 	for (i=start; i<=end; i++) {

- 		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);

--		memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

--				&__res.bi_enetaddr[i],

--				6);

-+		if (i == 0)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enetaddr, 6);

-+#if defined(CONFIG_405EP) || defined(CONFIG_44x)

-+		else if (i == 1)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enet1addr, 6);

-+#endif

-+#if defined(CONFIG_440GX)

-+		else if (i == 2)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enet2addr, 6);

-+		else if (i == 3)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enet3addr, 6);

-+#endif

- 	}

- }

- #endif

-diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h

-index fe24e45..6b7b63f 100644

---- a/include/asm-ppc/ppcboot.h

-+++ b/include/asm-ppc/ppcboot.h

-@@ -73,8 +73,8 @@ typedef struct bd_info {

- #if defined(CONFIG_HYMOD)

- 	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */

- #endif

--#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\

--	defined(CONFIG_83xx)

-+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \

-+	defined(CONFIG_85xx) ||	defined(CONFIG_83xx)

- 	/* second onboard ethernet port */

- 	unsigned char	bi_enet1addr[6];

- #endif

-@@ -96,5 +96,7 @@ typedef struct bd_info {

- #endif

- } bd_t;

- 

-+#define bi_tbfreq	bi_intfreq

-+

- #endif /* __ASSEMBLY__ */

- #endif	/* __ASM_PPCBOOT_H__ */

diff --git a/packages/linux/linux-dht-walnut-2.6.12/.mtn2git_empty b/packages/linux/linux-dht-walnut-2.6.12/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12/.mtn2git_empty
+++ /dev/null
diff --git a/packages/linux/linux-dht-walnut-2.6.12/dht-walnut_defconfig b/packages/linux/linux-dht-walnut-2.6.12/dht-walnut_defconfig
deleted file mode 100644
index 3cd0837ceb..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12/dht-walnut_defconfig
+++ /dev/null
@@ -1,1963 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Sat May 13 19:38:16 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-CONFIG_WALNUT=y
-# CONFIG_XILINX_ML300 is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_TCIC=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-# CONFIG_NFTL_RW is not set
-CONFIG_INFTL=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_WALNUT=m
-CONFIG_MTD_PCI=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_BLKMTD=m
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-# CONFIG_CISS_SCSI_TAPE is not set
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_SL82C105=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CY82C693=m
-CONFIG_BLK_DEV_CS5520=m
-CONFIG_BLK_DEV_CS5530=m
-CONFIG_BLK_DEV_HPT34X=m
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=y
-# CONFIG_PDC202XX_BURST is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-# CONFIG_PDC202XX_FORCE is not set
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
-CONFIG_AIC79XX_DEBUG_ENABLE=y
-CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_DPT_I2O=m
-# CONFIG_MEGARAID_NEWGEN is not set
-CONFIG_MEGARAID_LEGACY=m
-# CONFIG_SCSI_SATA is not set
-CONFIG_SCSI_BUSLOGIC=m
-# CONFIG_SCSI_OMIT_FLASHPOINT is not set
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
-# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
-CONFIG_SCSI_EATA_MAX_TAGS=16
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
-CONFIG_SCSI_DEBUG=m
-
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
-CONFIG_FUSION_CTL=m
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-
-#
-# Device Drivers
-#
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_SBP2_PHYS_DMA=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-CONFIG_X25=m
-CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
-CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-CONFIG_WINBOND_840=m
-CONFIG_DM9102=m
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_PCMCIA_XIRTULIP=m
-CONFIG_HP100=m
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=64
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_AMD8111_ETH=m
-# CONFIG_AMD8111E_NAPI is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
-CONFIG_FORCEDETH=m
-CONFIG_DGRS=m
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-# CONFIG_R8169_NAPI is not set
-# CONFIG_R8169_VLAN is not set
-CONFIG_SK98LIN=m
-CONFIG_VIA_VELOCITY=m
-CONFIG_TIGON3=m
-CONFIG_BNX2=m
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-CONFIG_PCMCIA_RAYCS=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_PCMCIA_WL3501=m
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-CONFIG_PRISM54=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-CONFIG_DSCC4=m
-# CONFIG_DSCC4_PCISYNC is not set
-# CONFIG_DSCC4_PCI_RST is not set
-CONFIG_LANMEDIA=m
-CONFIG_SYNCLINK_SYNCPPP=m
-CONFIG_HDLC=m
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_X25 is not set
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300=m
-
-#
-# Cyclades-PC300 MLPPP support is disabled.
-#
-
-#
-# Refer to the file README.mlppp, provided by PC300 package.
-#
-CONFIG_FARSYNC=m
-CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NET_FC is not set
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=y
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-# CONFIG_WDT_501_PCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
-CONFIG_NVRAM=m
-CONFIG_GEN_RTC=m
-# CONFIG_GEN_RTC_X is not set
-CONFIG_DTLK=m
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
-CONFIG_TCG_TPM=m
-CONFIG_TCG_NSC=m
-CONFIG_TCG_ATMEL=m
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-CONFIG_I2C_ISA=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ASB100=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_FSCHER=m
-CONFIG_SENSORS_FSCPOS=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_SIS5595=m
-CONFIG_SENSORS_SMSC47M1=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83627HF=m
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
-CONFIG_SENSORS_M41T00=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-# CONFIG_VIDEO_SAA7134_DVB is not set
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_CX88_DVB is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_DVB_AV7110=m
-# CONFIG_DVB_AV7110_FIRMWARE is not set
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_DIBUSB=m
-# CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES is not set
-# CONFIG_DVB_DIBCOM_DEBUG is not set
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-CONFIG_DVB_B2C2_SKYSTAR=m
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA80XX=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_ATMEL_AT76C651=m
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terresterial DTV) frontends
-#
-CONFIG_DVB_NXT2002=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-# CONFIG_SECURITY_SELINUX is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/packages/linux/linux-dht-walnut-2.6.12/iw_we18-5.diff b/packages/linux/linux-dht-walnut-2.6.12/iw_we18-5.diff
deleted file mode 100644
index 85fcdd1224..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12/iw_we18-5.diff
+++ /dev/null
@@ -1,462 +0,0 @@
-diff -upr linux-2.6.11/include/linux/wireless.h linux-2.6.11-WE18/include/linux/wireless.h
---- linux-2.6.11/include/linux/wireless.h	2004-12-24 13:35:01.000000000 -0800
-+++ linux-2.6.11-WE18/include/linux/wireless.h	2005-03-12 09:53:02.000000000 -0800
-@@ -1,10 +1,10 @@
- /*
-  * This file define a set of standard wireless extensions
-  *
-- * Version :	17	21.6.04
-+ * Version :	18	12.3.05
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
-  */
- 
- #ifndef _LINUX_WIRELESS_H
-@@ -82,7 +82,7 @@
-  * (there is some stuff that will be added in the future...)
-  * I just plan to increment with each new version.
-  */
--#define WIRELESS_EXT	17
-+#define WIRELESS_EXT	18
- 
- /*
-  * Changes :
-@@ -182,6 +182,21 @@
-  *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
-  *	- Wireless Event capability in struct iw_range
-  *	- Add support for relative TxPower (yick !)
-+ *
-+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
-+ * ----------
-+ *	- Add support for WPA/WPA2
-+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
-+ *	  SIOCGIWENCODEEXT)
-+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
-+ *	- Add SIOCSIWMLME
-+ *	- Add SIOCSIWPMKSA
-+ *	- Add struct iw_range bit field for supported encoding capabilities
-+ *	- Add optional scan request parameters for SIOCSIWSCAN
-+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
-+ *	  related parameters (extensible up to 4096 parameter values)
-+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
-+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
-  */
- 
- /**************************** CONSTANTS ****************************/
-@@ -256,6 +271,30 @@
- #define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
- #define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
- 
-+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
-+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
-+ * fields. More than one IE may be included in the request. Setting the generic
-+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
-+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
-+ * are required to report the used IE as a wireless event, e.g., when
-+ * associating with an AP. */
-+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-+
-+/* WPA : IEEE 802.11 MLME requests */
-+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-+					 * struct iw_mlme */
-+/* WPA : Authentication mode parameters */
-+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-+
-+/* WPA : Extended version of encoding configuration */
-+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-+
-+/* WPA2 : PMKSA cache management */
-+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-+
- /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
- 
- /* These 32 ioctl are wireless device private, for 16 commands.
-@@ -297,6 +336,34 @@
- #define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
- #define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
- #define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-+					 * (scan results); This includes id and
-+					 * length fields. One IWEVGENIE may
-+					 * contain more than one IE. Scan
-+					 * results may contain one or more
-+					 * IWEVGENIE events. */
-+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-+					 * (struct iw_michaelmicfailure)
-+					 */
-+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-+					 * The data includes id and length
-+					 * fields and may contain more than one
-+					 * IE. This event is required in
-+					 * Managed mode if the driver
-+					 * generates its own WPA/RSN IE. This
-+					 * should be sent just before
-+					 * IWEVREGISTERED event for the
-+					 * association. */
-+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-+					 * Response. The data includes id and
-+					 * length fields and may contain more
-+					 * than one IE. This may be sent
-+					 * between IWEVASSOCREQIE and
-+					 * IWEVREGISTERED events for the
-+					 * association. */
-+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-+					 * pre-authentication
-+					 * (struct iw_pmkid_cand) */
- 
- #define IWEVFIRST	0x8C00
- 
-@@ -432,12 +499,94 @@
- #define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
- #define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
- #define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-+/* struct iw_scan_req scan_type */
-+#define IW_SCAN_TYPE_ACTIVE 0
-+#define IW_SCAN_TYPE_PASSIVE 1
- /* Maximum size of returned data */
- #define IW_SCAN_MAX_DATA	4096	/* In bytes */
- 
- /* Max number of char in custom event - use multiple of them if needed */
- #define IW_CUSTOM_MAX		256	/* In bytes */
- 
-+/* Generic information element */
-+#define IW_GENERIC_IE_MAX	1024
-+
-+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-+#define IW_MLME_DEAUTH		0
-+#define IW_MLME_DISASSOC	1
-+
-+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-+#define IW_AUTH_INDEX		0x0FFF
-+#define IW_AUTH_FLAGS		0xF000
-+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
-+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
-+ * parameter that is being set/get to; value will be read/written to
-+ * struct iw_param value field) */
-+#define IW_AUTH_WPA_VERSION		0
-+#define IW_AUTH_CIPHER_PAIRWISE		1
-+#define IW_AUTH_CIPHER_GROUP		2
-+#define IW_AUTH_KEY_MGMT		3
-+#define IW_AUTH_TKIP_COUNTERMEASURES	4
-+#define IW_AUTH_DROP_UNENCRYPTED	5
-+#define IW_AUTH_80211_AUTH_ALG		6
-+#define IW_AUTH_WPA_ENABLED		7
-+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-+#define IW_AUTH_ROAMING_CONTROL		9
-+#define IW_AUTH_PRIVACY_INVOKED		10
-+
-+/* IW_AUTH_WPA_VERSION values (bit field) */
-+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-+
-+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
-+#define IW_AUTH_CIPHER_NONE	0x00000001
-+#define IW_AUTH_CIPHER_WEP40	0x00000002
-+#define IW_AUTH_CIPHER_TKIP	0x00000004
-+#define IW_AUTH_CIPHER_CCMP	0x00000008
-+#define IW_AUTH_CIPHER_WEP104	0x00000010
-+
-+/* IW_AUTH_KEY_MGMT values (bit field) */
-+#define IW_AUTH_KEY_MGMT_802_1X	1
-+#define IW_AUTH_KEY_MGMT_PSK	2
-+
-+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-+#define IW_AUTH_ALG_LEAP	0x00000004
-+
-+/* IW_AUTH_ROAMING_CONTROL values */
-+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-+					 * control */
-+
-+/* SIOCSIWENCODEEXT definitions */
-+#define IW_ENCODE_SEQ_MAX_SIZE	8
-+/* struct iw_encode_ext ->alg */
-+#define IW_ENCODE_ALG_NONE	0
-+#define IW_ENCODE_ALG_WEP	1
-+#define IW_ENCODE_ALG_TKIP	2
-+#define IW_ENCODE_ALG_CCMP	3
-+/* struct iw_encode_ext ->ext_flags */
-+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-+
-+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-+#define IW_MICFAILURE_GROUP	0x00000004
-+#define IW_MICFAILURE_PAIRWISE	0x00000008
-+#define IW_MICFAILURE_STAKEY	0x00000010
-+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-+					    */
-+
-+/* Bit field values for enc_capa in struct iw_range */
-+#define IW_ENC_CAPA_WPA		0x00000001
-+#define IW_ENC_CAPA_WPA2	0x00000002
-+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-+
- /* Event capability macros - in (struct iw_range *)->event_capa
-  * Because we have more than 32 possible events, we use an array of
-  * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-@@ -546,6 +695,132 @@ struct	iw_thrspy
- 	struct iw_quality	high;		/* High threshold */
- };
- 
-+/*
-+ *	Optional data for scan request
-+ *
-+ *	Note: these optional parameters are controlling parameters for the
-+ *	scanning behavior, these do not apply to getting scan results
-+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
-+ *	provide a merged results with all BSSes even if the previous scan
-+ *	request limited scanning to a subset, e.g., by specifying an SSID.
-+ *	Especially, scan results are required to include an entry for the
-+ *	current BSS if the driver is in Managed mode and associated with an AP.
-+ */
-+struct	iw_scan_req
-+{
-+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-+	__u8		essid_len;
-+	__u8		num_channels; /* num entries in channel_list;
-+				       * 0 = scan all allowed channels */
-+	__u8		flags; /* reserved as padding; use zero, this may
-+				* be used in the future for adding flags
-+				* to request different scan behavior */
-+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-+				* individual address of a specific BSS */
-+
-+	/*
-+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-+	 * the current ESSID. This allows scan requests for specific ESSID
-+	 * without having to change the current ESSID and potentially breaking
-+	 * the current association.
-+	 */
-+	__u8		essid[IW_ESSID_MAX_SIZE];
-+
-+	/*
-+	 * Optional parameters for changing the default scanning behavior.
-+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-+	 * reasonable default values. min_channel_time defines the time that
-+	 * will be used to wait for the first reply on each channel. If no
-+	 * replies are received, next channel will be scanned after this. If
-+	 * replies are received, total time waited on the channel is defined by
-+	 * max_channel_time.
-+	 */
-+	__u32		min_channel_time; /* in TU */
-+	__u32		max_channel_time; /* in TU */
-+
-+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-+};
-+
-+/* ------------------------- WPA SUPPORT ------------------------- */
-+
-+/*
-+ *	Extended data structure for get/set encoding (this is used with
-+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
-+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
-+ *	only the data contents changes (key data -> this structure, including
-+ *	key data).
-+ *
-+ *	If the new key is the first group key, it will be set as the default
-+ *	TX key. Otherwise, default TX key index is only changed if
-+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
-+ *
-+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
-+ *	special "change TX key index" operation which is indicated by setting
-+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
-+ *
-+ *	tx_seq/rx_seq are only used when respective
-+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
-+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
-+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
-+ *	used only by an Authenticator (AP or an IBSS station) to get the
-+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
-+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
-+ *	debugging/testing.
-+ */
-+struct	iw_encode_ext
-+{
-+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-+			       * (group) keys or unicast address for
-+			       * individual keys */
-+	__u16		alg; /* IW_ENCODE_ALG_* */
-+	__u16		key_len;
-+	__u8		key[0];
-+};
-+
-+/* SIOCSIWMLME data */
-+struct	iw_mlme
-+{
-+	__u16		cmd; /* IW_MLME_* */
-+	__u16		reason_code;
-+	struct sockaddr	addr;
-+};
-+
-+/* SIOCSIWPMKSA data */
-+#define IW_PMKSA_ADD		1
-+#define IW_PMKSA_REMOVE		2
-+#define IW_PMKSA_FLUSH		3
-+
-+#define IW_PMKID_LEN	16
-+
-+struct	iw_pmksa
-+{
-+	__u32		cmd; /* IW_PMKSA_* */
-+	struct sockaddr	bssid;
-+	__u8		pmkid[IW_PMKID_LEN];
-+};
-+
-+/* IWEVMICHAELMICFAILURE data */
-+struct	iw_michaelmicfailure
-+{
-+	__u32		flags;
-+	struct sockaddr	src_addr;
-+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-+};
-+
-+/* IWEVPMKIDCAND data */
-+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-+struct	iw_pmkid_cand
-+{
-+	__u32		flags; /* IW_PMKID_CAND_* */
-+	__u32		index; /* the smaller the index, the higher the
-+				* priority */
-+	struct sockaddr	bssid;
-+};
-+
- /* ------------------------ WIRELESS STATS ------------------------ */
- /*
-  * Wireless statistics (used for /proc/net/wireless)
-@@ -725,6 +1000,8 @@ struct	iw_range
- 	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
- 	/* Note : this frequency list doesn't need to fit channel numbers,
- 	 * because each entry contain its channel index */
-+
-+	__u32		enc_capa; /* IW_ENC_CAPA_* bit field */
- };
- 
- /*
-diff -upr linux-2.6.11/net/core/wireless.c linux-2.6.11-WE18/net/core/wireless.c
---- linux-2.6.11/net/core/wireless.c	2005-03-04 15:55:29.000000000 -0800
-+++ linux-2.6.11-WE18/net/core/wireless.c	2005-03-12 09:11:24.000000000 -0800
-@@ -2,7 +2,7 @@
-  * This file implement the Wireless Extensions APIs.
-  *
-  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
-- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
-+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
-  *
-  * (As all part of the Linux kernel, this file is GPL)
-  */
-@@ -187,6 +187,12 @@ static const struct iw_ioctl_description
- 		.header_type	= IW_HEADER_TYPE_ADDR,
- 		.flags		= IW_DESCR_FLAG_DUMP,
- 	},
-+	[SIOCSIWMLME	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_mlme),
-+		.max_tokens	= sizeof(struct iw_mlme),
-+	},
- 	[SIOCGIWAPLIST	- SIOCIWFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_POINT,
- 		.token_size	= sizeof(struct sockaddr) +
-@@ -195,7 +201,10 @@ static const struct iw_ioctl_description
- 		.flags		= IW_DESCR_FLAG_NOMAX,
- 	},
- 	[SIOCSIWSCAN	- SIOCIWFIRST] = {
--		.header_type	= IW_HEADER_TYPE_PARAM,
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= 0,
-+		.max_tokens	= sizeof(struct iw_scan_req),
- 	},
- 	[SIOCGIWSCAN	- SIOCIWFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_POINT,
-@@ -273,6 +282,42 @@ static const struct iw_ioctl_description
- 	[SIOCGIWPOWER	- SIOCIWFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_PARAM,
- 	},
-+	[SIOCSIWGENIE	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[SIOCGIWGENIE	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[SIOCSIWAUTH	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_PARAM,
-+	},
-+	[SIOCGIWAUTH	- SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_PARAM,
-+	},
-+	[SIOCSIWENCODEEXT - SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_encode_ext),
-+		.max_tokens	= sizeof(struct iw_encode_ext) +
-+				  IW_ENCODING_TOKEN_MAX,
-+	},
-+	[SIOCGIWENCODEEXT - SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_encode_ext),
-+		.max_tokens	= sizeof(struct iw_encode_ext) +
-+				  IW_ENCODING_TOKEN_MAX,
-+	},
-+	[SIOCSIWPMKSA - SIOCIWFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.min_tokens	= sizeof(struct iw_pmksa),
-+		.max_tokens	= sizeof(struct iw_pmksa),
-+	},
- };
- static const int standard_ioctl_num = (sizeof(standard_ioctl) /
- 				       sizeof(struct iw_ioctl_description));
-@@ -299,6 +344,31 @@ static const struct iw_ioctl_description
- 	[IWEVEXPIRED	- IWEVFIRST] = {
- 		.header_type	= IW_HEADER_TYPE_ADDR, 
- 	},
-+	[IWEVGENIE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[IWEVMICHAELMICFAILURE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT, 
-+		.token_size	= 1,
-+		.max_tokens	= sizeof(struct iw_michaelmicfailure),
-+	},
-+	[IWEVASSOCREQIE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[IWEVASSOCRESPIE	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= IW_GENERIC_IE_MAX,
-+	},
-+	[IWEVPMKIDCAND	- IWEVFIRST] = {
-+		.header_type	= IW_HEADER_TYPE_POINT,
-+		.token_size	= 1,
-+		.max_tokens	= sizeof(struct iw_pmkid_cand),
-+	},
- };
- static const int standard_event_num = (sizeof(standard_event) /
- 				       sizeof(struct iw_ioctl_description));
diff --git a/packages/linux/linux-dht-walnut-2.6.12/linux-2.6.12-mppe-mppc-1.3.patch b/packages/linux/linux-dht-walnut-2.6.12/linux-2.6.12-mppe-mppc-1.3.patch
deleted file mode 100644
index aa430252c7..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12/linux-2.6.12-mppe-mppc-1.3.patch
+++ /dev/null
@@ -1,1559 +0,0 @@
-diff -ruN linux-2.6.12.orig/drivers/net/Kconfig linux-2.6.12/drivers/net/Kconfig
---- linux-2.6.12.orig/drivers/net/Kconfig	2005-06-28 19:57:16.000000000 +0200
-+++ linux-2.6.12/drivers/net/Kconfig	2005-06-28 20:07:01.000000000 +0200
-@@ -2417,6 +2417,32 @@
- 	  module; it is called bsd_comp and will show up in the directory
- 	  modules once you have said "make modules". If unsure, say N.
- 
-+config PPP_MPPE_MPPC
-+	tristate "Microsoft PPP compression/encryption (MPPC/MPPE)"
-+	depends on PPP
-+	select CRYPTO_SHA1
-+	select CRYPTO_ARC4
-+	---help---
-+	  Support for the Microsoft Point-To-Point Compression (RFC2118) and 
-+	  Microsoft Point-To-Point Encryption (RFC3078). These protocols are
-+	  supported by Microsoft Windows and wide range of "hardware" access
-+	  servers. MPPE is common protocol in Virtual Private Networks. According
-+	  to RFC3078, MPPE supports 40, 56 and 128-bit key lengths. Depending on
-+	  PPP daemon configuration on both ends of the link, following scenarios
-+	  are possible:
-+		- only compression (MPPC) is used,
-+		- only encryption (MPPE) is used,
-+		- compression and encryption (MPPC+MPPE) are used.
-+
-+	  Please note that Hi/Fn (http://www.hifn.com) holds patent on MPPC so
-+	  you should check if this patent is valid in your country in order to
-+	  avoid legal problems.
-+
-+	  For more information please visit http://free.polbox.pl/h/hs001
-+
-+	  To compile this driver as a module, choose M here. The module will
-+	  be called ppp_mppe_mppc.ko.
-+
- config PPPOE
- 	tristate "PPP over Ethernet (EXPERIMENTAL)"
- 	depends on EXPERIMENTAL && PPP
-diff -ruN linux-2.6.12.orig/drivers/net/Makefile linux-2.6.12/drivers/net/Makefile
---- linux-2.6.12.orig/drivers/net/Makefile	2005-06-28 19:57:16.000000000 +0200
-+++ linux-2.6.12/drivers/net/Makefile	2005-06-28 20:07:01.000000000 +0200
-@@ -105,6 +105,7 @@
- obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
- obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
- obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-+obj-$(CONFIG_PPP_MPPE_MPPC) += ppp_mppe_mppc.o
- obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
- 
- obj-$(CONFIG_SLIP) += slip.o
-diff -ruN linux-2.6.12.orig/drivers/net/ppp_generic.c linux-2.6.12/drivers/net/ppp_generic.c
---- linux-2.6.12.orig/drivers/net/ppp_generic.c	2005-06-28 19:57:20.000000000 +0200
-+++ linux-2.6.12/drivers/net/ppp_generic.c	2005-06-28 20:07:01.000000000 +0200
-@@ -19,7 +19,7 @@
-  * PPP driver, written by Michael Callahan and Al Longyear, and
-  * subsequently hacked by Paul Mackerras.
-  *
-- * ==FILEVERSION 20041108==
-+ * ==FILEVERSION 20050110==
-  */
- 
- #include <linux/config.h>
-@@ -105,6 +105,7 @@
- 	spinlock_t	rlock;		/* lock for receive side 58 */
- 	spinlock_t	wlock;		/* lock for transmit side 5c */
- 	int		mru;		/* max receive unit 60 */
-+	int		mru_alloc;	/* MAX(1500,MRU) for dev_alloc_skb() */
- 	unsigned int	flags;		/* control bits 64 */
- 	unsigned int	xstate;		/* transmit state bits 68 */
- 	unsigned int	rstate;		/* receive state bits 6c */
-@@ -632,7 +633,9 @@
- 	case PPPIOCSMRU:
- 		if (get_user(val, p))
- 			break;
--		ppp->mru = val;
-+		ppp->mru_alloc = ppp->mru = val;
-+		if (ppp->mru_alloc < PPP_MRU)
-+		    ppp->mru_alloc = PPP_MRU;	/* increase for broken peers */
- 		err = 0;
- 		break;
- 
-@@ -1107,14 +1110,37 @@
- 	case PPP_CCP:
- 		/* peek at outbound CCP frames */
- 		ppp_ccp_peek(ppp, skb, 0);
-+		/*
-+		 * When LZS or MPPE/MPPC has been negotiated we don't send
-+		 * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd
-+		 * sends such a packet but we silently discard it here
-+		 */
-+		if (CCP_CODE(skb->data+2) == CCP_RESETACK
-+		    && (ppp->xcomp->compress_proto == CI_MPPE
-+			|| ppp->xcomp->compress_proto == CI_LZS)) {
-+		    --ppp->stats.tx_packets;
-+		    ppp->stats.tx_bytes -= skb->len - 2;
-+		    kfree_skb(skb);
-+		    return;
-+		}
- 		break;
- 	}
- 
- 	/* try to do packet compression */
- 	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0
- 	    && proto != PPP_LCP && proto != PPP_CCP) {
--		new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len,
--				    GFP_ATOMIC);
-+		int comp_ovhd = 0;
-+		/* 
-+		 * because of possible data expansion when MPPC or LZS
-+		 * is used, allocate compressor's buffer 12.5% bigger
-+		 * than MTU
-+		 */
-+		if (ppp->xcomp->compress_proto == CI_MPPE)
-+		    comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + MPPE_OVHD;
-+		else if (ppp->xcomp->compress_proto == CI_LZS)
-+		    comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + LZS_OVHD;
-+		new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len
-+				    + comp_ovhd, GFP_ATOMIC);
- 		if (new_skb == 0) {
- 			printk(KERN_ERR "PPP: no memory (comp pkt)\n");
- 			goto drop;
-@@ -1132,9 +1158,21 @@
- 			skb = new_skb;
- 			skb_put(skb, len);
- 			skb_pull(skb, 2);	/* pull off A/C bytes */
--		} else {
-+		} else if (len == 0) {
- 			/* didn't compress, or CCP not up yet */
- 			kfree_skb(new_skb);
-+		} else {
-+			/*
-+			 * (len < 0)
-+			 * MPPE requires that we do not send unencrypted
-+			 * frames.  The compressor will return -1 if we
-+			 * should drop the frame.  We cannot simply test
-+			 * the compress_proto because MPPE and MPPC share
-+			 * the same number.
-+			 */
-+			printk(KERN_ERR "ppp: compressor dropped pkt\n");
-+			kfree_skb(new_skb);
-+			goto drop;
- 		}
- 	}
- 
-@@ -1640,14 +1678,15 @@
- 		goto err;
- 
- 	if (proto == PPP_COMP) {
--		ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN);
-+		ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN);
- 		if (ns == 0) {
- 			printk(KERN_ERR "ppp_decompress_frame: no memory\n");
- 			goto err;
- 		}
- 		/* the decompressor still expects the A/C bytes in the hdr */
- 		len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2,
--				skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN);
-+				skb->len + 2, ns->data,
-+				ppp->mru_alloc + PPP_HDRLEN);
- 		if (len < 0) {
- 			/* Pass the compressed frame to pppd as an
- 			   error indication. */
-@@ -1673,7 +1712,14 @@
- 	return skb;
- 
-  err:
--	ppp->rstate |= SC_DC_ERROR;
-+	if (ppp->rcomp->compress_proto != CI_MPPE
-+	    && ppp->rcomp->compress_proto != CI_LZS) {
-+	    /*
-+	     * If decompression protocol isn't MPPE/MPPC or LZS, we set
-+	     * SC_DC_ERROR flag and wait for CCP_RESETACK
-+	     */
-+	    ppp->rstate |= SC_DC_ERROR;
-+	}
- 	ppp_receive_error(ppp);
- 	return skb;
- }
-@@ -2349,6 +2395,7 @@
- 	memset(ppp, 0, sizeof(struct ppp));
- 
- 	ppp->mru = PPP_MRU;
-+	ppp->mru_alloc = PPP_MRU;
- 	init_ppp_file(&ppp->file, INTERFACE);
- 	ppp->file.hdrlen = PPP_HDRLEN - 2;	/* don't count proto bytes */
- 	for (i = 0; i < NUM_NP; ++i)
-diff -ruN linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c linux-2.6.12/drivers/net/ppp_mppe_mppc.c
---- linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12/drivers/net/ppp_mppe_mppc.c	2005-06-28 20:07:01.000000000 +0200
-@@ -0,0 +1,1299 @@
-+/*
-+ * ppp_mppe_mppc.c - MPPC/MPPE "compressor/decompressor" module.
-+ *
-+ * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu>
-+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com>
-+ * Copyright (c) 2002-2004 Jan Dubiec <jdx@slackware.pl>
-+ * 
-+ * Permission to use, copy, modify, and distribute this software and its
-+ * documentation is hereby granted, provided that the above copyright
-+ * notice appears in all copies. This software is provided without any
-+ * warranty, express or implied.
-+ *
-+ * The code is based on MPPE kernel module written by Árpád Magosányi and
-+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/.
-+ * I have added MPPC and 56 bit session keys support in MPPE.
-+ *
-+ * WARNING! Although this is open source code, its usage in some countries
-+ * (in particular in the USA) may violate Stac Inc. patent for MPPC.
-+ *
-+ *  ==FILEVERSION 20041123==
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <asm/scatterlist.h>
-+#include <linux/vmalloc.h>
-+#include <linux/crypto.h>
-+
-+#include <linux/ppp_defs.h>
-+#include <linux/ppp-comp.h>
-+
-+/*
-+ * State for a mppc/mppe "(de)compressor".
-+ */
-+struct ppp_mppe_state {
-+    struct crypto_tfm *arc4_tfm;
-+    struct crypto_tfm *sha1_tfm;
-+    u8		*sha1_digest;
-+    u8		master_key[MPPE_MAX_KEY_LEN];
-+    u8		session_key[MPPE_MAX_KEY_LEN];
-+    u8		mppc;		/* do we use compression (MPPC)? */
-+    u8		mppe;		/* do we use encryption (MPPE)? */
-+    u8		keylen;		/* key length in bytes */
-+    u8		bitkeylen;	/* key length in bits */
-+    u16		ccount;		/* coherency counter */
-+    u16		bits;		/* MPPC/MPPE control bits */
-+    u8		stateless;	/* do we use stateless mode? */
-+    u8		nextflushed;	/* set A bit in the next outgoing packet;
-+				   used only by compressor*/
-+    u8		flushexpected;	/* drop packets until A bit is received;
-+				   used only by decompressor*/
-+    u8		*hist;		/* MPPC history */
-+    u16		*hash;		/* Hash table; used only by compressor */
-+    u16		histptr;	/* history "cursor" */
-+    int		unit;
-+    int		debug;
-+    int		mru;
-+    struct compstat stats;
-+};
-+
-+#define MPPE_HIST_LEN		8192	/* MPPC history size */
-+#define MPPE_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
-+
-+#define MPPE_BIT_FLUSHED	0x80	/* bit A */
-+#define MPPE_BIT_RESET		0x40	/* bit B */
-+#define MPPE_BIT_COMP		0x20	/* bit C */
-+#define MPPE_BIT_ENCRYPTED	0x10	/* bit D */
-+
-+#define MPPE_SALT0		0xD1	/* values used in MPPE key derivation */
-+#define MPPE_SALT1		0x26	/* according to RFC3079 */
-+#define MPPE_SALT2		0x9E
-+
-+#define MPPE_CCOUNT(x)		((((x)[4] & 0x0f) << 8) + (x)[5])
-+#define MPPE_BITS(x)		((x)[4] & 0xf0)
-+#define MPPE_CTRLHI(x)		((((x)->ccount & 0xf00)>>8)|((x)->bits))
-+#define MPPE_CTRLLO(x)		((x)->ccount & 0xff)
-+
-+/*
-+ * Kernel Crypto API needs its arguments to be in kmalloc'd memory, not in the
-+ * module static data area. That means sha_pad needs to be kmalloc'd. It is done
-+ * in mppe_module_init(). This has been pointed out on 30th July 2004 by Oleg
-+ * Makarenko on pptpclient-devel mailing list.
-+ */
-+#define SHA1_PAD_SIZE		40
-+struct sha_pad {
-+    unsigned char sha_pad1[SHA1_PAD_SIZE];
-+    unsigned char sha_pad2[SHA1_PAD_SIZE];
-+};
-+static struct sha_pad *sha_pad;
-+
-+static inline void
-+setup_sg(struct scatterlist *sg, const void  *address, unsigned int length)
-+{
-+    sg[0].page = virt_to_page(address);
-+    sg[0].offset = offset_in_page(address);
-+    sg[0].length = length;
-+}
-+
-+static inline void
-+arc4_setkey(struct ppp_mppe_state *state, const unsigned char *key,
-+	    const unsigned int keylen)
-+{
-+    crypto_cipher_setkey(state->arc4_tfm, key, keylen);
-+}
-+
-+static inline void
-+arc4_encrypt(struct ppp_mppe_state *state, const unsigned char *in,
-+	     const unsigned int len, unsigned char *out)
-+{
-+    struct scatterlist sgin[4], sgout[4];
-+
-+    setup_sg(sgin, in, len);
-+    setup_sg(sgout, out, len);
-+    crypto_cipher_encrypt(state->arc4_tfm, sgout, sgin, len);
-+}
-+
-+#define arc4_decrypt arc4_encrypt
-+
-+/*
-+ * Key Derivation, from RFC 3078, RFC 3079.
-+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079.
-+ */
-+static void
-+get_new_key_from_sha(struct ppp_mppe_state *state, unsigned char *interim_key)
-+{
-+    struct scatterlist sg[4];
-+
-+    setup_sg(&sg[0], state->master_key, state->keylen);
-+    setup_sg(&sg[1], sha_pad->sha_pad1, sizeof(sha_pad->sha_pad1));
-+    setup_sg(&sg[2], state->session_key, state->keylen);
-+    setup_sg(&sg[3], sha_pad->sha_pad2, sizeof(sha_pad->sha_pad2));
-+
-+    crypto_digest_digest (state->sha1_tfm, sg, 4, state->sha1_digest);
-+
-+    memcpy(interim_key, state->sha1_digest, state->keylen);
-+}
-+
-+static void
-+mppe_change_key(struct ppp_mppe_state *state, int initialize)
-+{
-+    unsigned char interim_key[MPPE_MAX_KEY_LEN];
-+
-+    get_new_key_from_sha(state, interim_key);
-+    if (initialize) {
-+	memcpy(state->session_key, interim_key, state->keylen);
-+    } else {
-+	arc4_setkey(state, interim_key, state->keylen);
-+	arc4_encrypt(state, interim_key, state->keylen, state->session_key);
-+    }
-+    if (state->keylen == 8) {
-+	if (state->bitkeylen == 40) {
-+	    state->session_key[0] = MPPE_SALT0;
-+	    state->session_key[1] = MPPE_SALT1;
-+	    state->session_key[2] = MPPE_SALT2;
-+	} else {
-+	    state->session_key[0] = MPPE_SALT0;
-+	}
-+    }
-+    arc4_setkey(state, state->session_key, state->keylen);
-+}
-+
-+/* increase 12-bit coherency counter */
-+static inline void
-+mppe_increase_ccount(struct ppp_mppe_state *state)
-+{
-+    state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT;
-+    if (state->mppe) {
-+	if (state->stateless) {
-+	    mppe_change_key(state, 0);
-+	    state->nextflushed = 1;
-+	} else {
-+	    if ((state->ccount & 0xff) == 0xff) {
-+		mppe_change_key(state, 0);
-+	    }
-+	}
-+    }
-+}
-+
-+/* allocate space for a MPPE/MPPC (de)compressor.  */
-+/*   comp != 0 -> init compressor */
-+/*   comp = 0 -> init decompressor */
-+static void *
-+mppe_alloc(unsigned char *options, int opt_len, int comp)
-+{
-+    struct ppp_mppe_state *state;
-+    unsigned int digestsize;
-+    u8* fname;
-+
-+    fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc";
-+
-+    /*  
-+     * Hack warning - additionally to the standard MPPC/MPPE configuration
-+     * options, pppd passes to the (de)copressor 8 or 16 byte session key.
-+     * Therefore options[1] contains MPPC/MPPE configuration option length
-+     * (CILEN_MPPE = 6), but the real options length, depending on the key
-+     * length, is 6+8 or 6+16.
-+     */
-+    if (opt_len < CILEN_MPPE) {
-+	printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len);
-+	return NULL;
-+    }
-+
-+    if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+	(options[2] & ~MPPE_STATELESS) != 0 ||
-+	options[3] != 0 || options[4] != 0 ||
-+	(options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+	(options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+	printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+	       "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0],
-+	       options[1], options[2], options[3], options[4], options[5]);
-+	return NULL;
-+    }
-+
-+    state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL);
-+    if (state == NULL) {
-+	printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname,
-+	       comp ? "" : "de");
-+	return NULL;
-+    }
-+    memset(state, 0, sizeof(struct ppp_mppe_state));
-+
-+    state->mppc = options[5] & MPPE_MPPC;	/* Do we use MPPC? */
-+    state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+	MPPE_40BIT);				/* Do we use MPPE? */
-+
-+    if (state->mppc) {
-+	/* allocate MPPC history */
-+	state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8));
-+	if (state->hist == NULL) {
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+		   fname);
-+	    return NULL;
-+	}
-+
-+	/* allocate hashtable for MPPC compressor */
-+	if (comp) {
-+	    state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16));
-+	    if (state->hash == NULL) {
-+		vfree(state->hist);
-+		kfree(state);
-+		printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+		       fname);
-+		return NULL;
-+	    }
-+	}
-+    }
-+
-+    if (state->mppe) { /* specific for MPPE */
-+	/* Load ARC4 algorithm */
-+	state->arc4_tfm = crypto_alloc_tfm("arc4", 0);
-+	if (state->arc4_tfm == NULL) {
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot load ARC4 module\n", fname);
-+	    return NULL;
-+	}
-+
-+	/* Load SHA1 algorithm */
-+	state->sha1_tfm = crypto_alloc_tfm("sha1", 0);
-+	if (state->sha1_tfm == NULL) {
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot load SHA1 module\n", fname);
-+	    return NULL;
-+	}
-+
-+	digestsize = crypto_tfm_alg_digestsize(state->sha1_tfm);
-+	if (digestsize < MPPE_MAX_KEY_LEN) {
-+	    crypto_free_tfm(state->sha1_tfm);
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: CryptoAPI SHA1 digest size too small\n", fname);
-+	}
-+
-+	state->sha1_digest = kmalloc(digestsize, GFP_KERNEL);
-+	if (!state->sha1_digest) {
-+	    crypto_free_tfm(state->sha1_tfm);
-+	    crypto_free_tfm(state->arc4_tfm);
-+	    if (state->mppc) {
-+		vfree(state->hash);
-+		if (comp)
-+		    vfree(state->hist);
-+	    }
-+	    kfree(state);
-+	    printk(KERN_ERR "%s: cannot allocate space for SHA1 digest\n", fname);
-+	}
-+
-+	memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN);
-+	memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN);
-+	/* initial key generation is done in mppe_init() */
-+    }
-+
-+    return (void *) state;
-+}
-+
-+static void *
-+mppe_comp_alloc(unsigned char *options, int opt_len)
-+{
-+    return mppe_alloc(options, opt_len, 1);
-+}
-+
-+static void *
-+mppe_decomp_alloc(unsigned char *options, int opt_len)
-+{
-+    return mppe_alloc(options, opt_len, 0);
-+}
-+
-+/* cleanup the (de)compressor */
-+static void
-+mppe_comp_free(void *arg)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+
-+    if (state != NULL) {
-+	if (state->mppe) {
-+	    if (state->sha1_digest != NULL)
-+		kfree(state->sha1_digest);
-+	    if (state->sha1_tfm != NULL)
-+		crypto_free_tfm(state->sha1_tfm);
-+	    if (state->arc4_tfm != NULL)
-+		crypto_free_tfm(state->arc4_tfm);
-+	}
-+	if (state->hist != NULL)
-+	    vfree(state->hist);
-+	if (state->hash != NULL)
-+	    vfree(state->hash);
-+	kfree(state);
-+    }
-+}
-+
-+/* init MPPC/MPPE (de)compresor */
-+/*   comp != 0 -> init compressor */
-+/*   comp = 0 -> init decompressor */
-+static int
-+mppe_init(void *arg, unsigned char *options, int opt_len, int unit,
-+	  int hdrlen, int mru, int debug, int comp)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+    u8* fname;
-+
-+    fname = comp ? "mppe_comp_init" : "mppe_decomp_init";
-+
-+    if (opt_len < CILEN_MPPE) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: wrong options length: %u\n",
-+		   fname, opt_len);
-+	return 0;
-+    }
-+
-+    if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+	(options[2] & ~MPPE_STATELESS) != 0 ||
-+	options[3] != 0 || options[4] != 0 ||
-+	(options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+	(options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+		   "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname,
-+		   options[0], options[1], options[2], options[3], options[4],
-+		   options[5]);
-+	return 0;
-+    }
-+
-+    if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT &&
-+	(options[5] & ~MPPE_MPPC) != MPPE_56BIT &&
-+	(options[5] & ~MPPE_MPPC) != MPPE_40BIT &&
-+	(options[5] & MPPE_MPPC) != MPPE_MPPC) {
-+	if (debug)
-+	    printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n",
-+		   fname, options[5]);
-+	return 0;
-+    }
-+
-+    state->mppc = options[5] & MPPE_MPPC;	/* Do we use MPPC? */
-+    state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+	MPPE_40BIT);				/* Do we use MPPE? */
-+    state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */
-+
-+    switch (state->mppe) {
-+    case MPPE_40BIT:     /* 40 bit key */
-+	state->keylen = 8;
-+	state->bitkeylen = 40;
-+	break;
-+    case MPPE_56BIT:     /* 56 bit key */
-+	state->keylen = 8;
-+	state->bitkeylen = 56;
-+	break;
-+    case MPPE_128BIT:    /* 128 bit key */
-+	state->keylen = 16;
-+	state->bitkeylen = 128;
-+	break;
-+    default:
-+	state->keylen = 0;
-+	state->bitkeylen = 0;
-+    }
-+
-+    state->ccount = MPPE_MAX_CCOUNT;
-+    state->bits = 0;
-+    state->unit  = unit;
-+    state->debug = debug;
-+    state->histptr = MPPE_HIST_LEN;
-+    if (state->mppc) {	/* reset history if MPPC was negotiated */
-+	memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8));
-+    }
-+
-+    if (state->mppe) { /* generate initial session keys */
-+	mppe_change_key(state, 1);
-+    }
-+
-+    if (comp) { /* specific for compressor */
-+	state->nextflushed = 1;
-+    } else { /* specific for decompressor */
-+	state->mru = mru;
-+	state->flushexpected = 1;
-+    }
-+
-+    return 1;
-+}
-+
-+static int
-+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+	       int hdrlen, int debug)
-+{
-+    return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1);
-+}
-+
-+
-+static int
-+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+		 int hdrlen, int mru, int debug)
-+{
-+    return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0);
-+}
-+
-+static void
-+mppe_comp_reset(void *arg)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+    if (state->debug)
-+	printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n",
-+	       __FUNCTION__, state->unit);
-+
-+    state->nextflushed = 1;
-+    if (state->mppe)
-+	arc4_setkey(state, state->session_key, state->keylen);
-+}
-+
-+static void
-+mppe_decomp_reset(void *arg)
-+{
-+    /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack.
-+       But when we receive such a packet, we just ignore it. */
-+    return;
-+}
-+
-+static void
-+mppe_stats(void *arg, struct compstat *stats)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+    *stats = state->stats;
-+}
-+
-+/***************************/
-+/**** Compression stuff ****/
-+/***************************/
-+/* inserts 1 to 8 bits into the output buffer */
-+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n) {
-+	*l = (*l) - n;
-+	val <<= *l;
-+	*buf = *buf | (val & 0xff);
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++;
-+	*l = 8 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 8) & 0xff);
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+/* inserts 9 to 16 bits into the output buffer */
-+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n - 8) {
-+	(*i)++;
-+	*l = 8 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 8) & 0xff);
-+	*(++buf) = val & 0xff;
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++; (*i)++;
-+	*l = 16 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 16) & 0xff);
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+/* inserts 17 to 24 bits into the output buffer */
-+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+    buf += *i;
-+    if (*l >= n - 16) {
-+	(*i)++; (*i)++;
-+	*l = 16 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 16) & 0xff);
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	    *(++buf) = 0;
-+	}
-+    } else {
-+	(*i)++; (*i)++; (*i)++;
-+	*l = 24 - n + (*l);
-+	val <<= *l;
-+	*buf = *buf | ((val >> 24) & 0xff);
-+	*(++buf) = (val >> 16) & 0xff;
-+	*(++buf) = (val >> 8) & 0xff;
-+	*(++buf) = val & 0xff;
-+    }
-+}
-+
-+static int
-+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+	      unsigned char *obuf, int isize, int osize)
-+{
-+    u32 olen, off, len, idx, i, l;
-+    u8 *hist, *sbuf, *p, *q, *r, *s;
-+
-+    /*  
-+	At this point, to avoid possible buffer overflow caused by packet
-+	expansion during/after compression,  we should make sure that
-+	osize >= (((isize*9)/8)+1)+2, but we don't do that because in
-+	ppp_generic.c we simply allocate bigger obuf.
-+
-+	Maximum MPPC packet expansion is 12.5%. This is the worst case when
-+	all octets in the input buffer are >= 0x80 and we cannot find any
-+	repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC
-+	status bits and coherency counter.
-+    */
-+
-+    hist = state->hist + MPPE_HIST_LEN;
-+    /* check if there is enough room at the end of the history */
-+    if (state->histptr + isize >= 2*MPPE_HIST_LEN) {
-+	state->bits |= MPPE_BIT_RESET;
-+	state->histptr = MPPE_HIST_LEN;
-+	memcpy(state->hist, hist, MPPE_HIST_LEN);
-+    }
-+    /* add packet to the history; isize must be <= MPPE_HIST_LEN */
-+    sbuf = state->hist + state->histptr;
-+    memcpy(sbuf, ibuf, isize);
-+    state->histptr += isize;
-+
-+    /* compress data */
-+    r = sbuf + isize;
-+    *obuf = olen = i = 0;
-+    l = 8;
-+    while (i < isize - 2) {
-+	s = q = sbuf + i;
-+	idx = ((40543*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1fff;
-+	p = hist + state->hash[idx];
-+	state->hash[idx] = (u16) (s - hist);
-+	off = s - p;
-+	if (off > MPPE_HIST_LEN - 1 || off < 1 || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++) {
-+	    /* no match found; encode literal byte */
-+	    if (ibuf[i] < 0x80) {		/* literal byte < 0x80 */
-+		putbits8(obuf, (u32) ibuf[i], 8, &olen, &l);
-+	    } else {				/* literal byte >= 0x80 */
-+		putbits16(obuf, (u32) (0x100|(ibuf[i]&0x7f)), 9, &olen, &l);
-+	    }
-+	    ++i;
-+	    continue;
-+	}
-+	if (r - q >= 64) {
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+	    *p++ != *s++;
-+	    if (s - q == 64) {
-+		p--; s--;
-+		while((*p++ == *s++) && (s < r) && (p < q));
-+	    }
-+	} else {
-+	    while((*p++ == *s++) && (s < r) && (p < q));
-+	}
-+	len = s - q - 1;
-+	i += len;
-+
-+	/* at least 3 character match found; code data */
-+	/* encode offset */
-+	if (off < 64) {			/* 10-bit offset; 0 <= offset < 64 */
-+	    putbits16(obuf, 0x3c0|off, 10, &olen, &l);
-+	} else if (off < 320) {		/* 12-bit offset; 64 <= offset < 320 */
-+	    putbits16(obuf, 0xe00|(off-64), 12, &olen, &l);
-+	} else if (off < 8192) {	/* 16-bit offset; 320 <= offset < 8192 */
-+	    putbits16(obuf, 0xc000|(off-320), 16, &olen, &l);
-+	} else {
-+	    /* This shouldn't happen; we return 0 what means "packet expands",
-+	    and we send packet uncompressed. */
-+	    if (state->debug)
-+		printk(KERN_DEBUG "%s%d: wrong offset value: %d\n",
-+		       __FUNCTION__, state->unit, off);
-+	    return 0;
-+	}
-+	/* encode length of match */
-+	if (len < 4) {			/* length = 3 */
-+	    putbits8(obuf, 0, 1, &olen, &l);
-+	} else if (len < 8) {		/* 4 <= length < 8 */
-+	    putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l);
-+	} else if (len < 16) {		/* 8 <= length < 16 */
-+	    putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l);
-+	} else if (len < 32) {		/* 16 <= length < 32 */
-+	    putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l);
-+	} else if (len < 64) {		/* 32 <= length < 64 */
-+	    putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l);
-+	} else if (len < 128) {		/* 64 <= length < 128 */
-+	    putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l);
-+	} else if (len < 256) {		/* 128 <= length < 256 */
-+	    putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l);
-+	} else if (len < 512) {		/* 256 <= length < 512 */
-+	    putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l);
-+	} else if (len < 1024) {	/* 512 <= length < 1024 */
-+	    putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l);
-+	} else if (len < 2048) {	/* 1024 <= length < 2048 */
-+	    putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l);
-+	} else if (len < 4096) {	/* 2048 <= length < 4096 */
-+	    putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l);
-+	} else if (len < 8192) {	/* 4096 <= length < 8192 */
-+	    putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l);
-+	} else {
-+	    /* This shouldn't happen; we return 0 what means "packet expands",
-+	    and send packet uncompressed. */
-+	    if (state->debug)
-+		printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n",
-+		       __FUNCTION__, state->unit, len);
-+	    return 0;
-+	}
-+    }
-+
-+    /* Add remaining octets to the output */
-+    while(isize - i > 0) {
-+	if (ibuf[i] < 0x80) {	/* literal byte < 0x80 */
-+	    putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
-+	} else {		/* literal byte >= 0x80 */
-+	    putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
-+	}
-+    }
-+    /* Reset unused bits of the last output octet */
-+    if ((l != 0) && (l != 8)) {
-+	putbits8(obuf, 0, l, &olen, &l);
-+    }
-+
-+    return (int) olen;
-+}
-+
-+int
-+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
-+	      int isize, int osize)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+    int proto, olen, complen, off;
-+    unsigned char *wptr;
-+
-+    /* Check that the protocol is in the range we handle. */
-+    proto = PPP_PROTOCOL(ibuf);
-+    if (proto < 0x0021 || proto > 0x00fa)
-+	return 0;
-+
-+    wptr = obuf;
-+    /* Copy over the PPP header */
-+    wptr[0] = PPP_ADDRESS(ibuf);
-+    wptr[1] = PPP_CONTROL(ibuf);
-+    wptr[2] = PPP_COMP >> 8;
-+    wptr[3] = PPP_COMP;
-+    wptr += PPP_HDRLEN + (MPPE_OVHD / 2); /* Leave two octets for MPPE/MPPC bits */
-+
-+    /* 
-+     * In ver. 0.99 protocol field was compressed. Deflate and BSD compress
-+     * do PFC before actual compression, RCF2118 and RFC3078 are not precise
-+     * on this topic so I decided to do PFC. Unfortunately this change caused
-+     * incompatibility with older/other MPPE/MPPC modules. I have received
-+     * a lot of complaints from unexperienced users so I have decided to revert
-+     * to previous state, i.e. the protocol field is sent uncompressed now.
-+     * Although this may be changed in the future.
-+     *
-+     * Receiving side (mppe_decompress()) still accepts packets with compressed
-+     * and uncompressed protocol field so you shouldn't get "Unsupported protocol
-+     * 0x2145 received" messages anymore.
-+     */
-+    //off = (proto > 0xff) ? 2 : 3; /* PFC - skip first protocol byte if 0 */
-+    off = 2;
-+
-+    ibuf += off;
-+
-+    mppe_increase_ccount(state);
-+
-+    if (state->nextflushed) {
-+	state->bits |= MPPE_BIT_FLUSHED;
-+	state->nextflushed = 0;
-+	if (state->mppe && !state->stateless) {
-+	    /*
-+	     * If this is the flag packet, the key has been already changed in
-+	     * mppe_increase_ccount() so we dont't do it once again.
-+	     */
-+	    if ((state->ccount & 0xff) != 0xff) {
-+		arc4_setkey(state, state->session_key, state->keylen);
-+	    }
-+	}
-+	if (state->mppc) { /* reset history */
-+	    state->bits |= MPPE_BIT_RESET;
-+	    state->histptr = MPPE_HIST_LEN;
-+	    memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+	}
-+    }
-+
-+    if (state->mppc && !state->mppe) { /* Do only compression */
-+	complen = mppc_compress(state, ibuf, wptr, isize - off,
-+				osize - PPP_HDRLEN - (MPPE_OVHD / 2));
-+	/*
-+	 * TODO: Implement an heuristics to handle packet expansion in a smart
-+	 * way. Now, when a packet expands, we send it as uncompressed and
-+	 * when next packet is sent we have to reset compressor's history.
-+	 * Maybe it would be better to send such packet as compressed in order
-+	 * to keep history's continuity.
-+	 */
-+	if ((complen > isize) || (complen > osize - PPP_HDRLEN) ||
-+	    (complen == 0)) {
-+	    /* packet expands */
-+	    state->nextflushed = 1;
-+	    memcpy(wptr, ibuf, isize - off);
-+	    olen = isize - (off - 2) + MPPE_OVHD;
-+	    (state->stats).inc_bytes += olen;
-+	    (state->stats).inc_packets++;
-+	} else {
-+	    state->bits |= MPPE_BIT_COMP;
-+	    olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2);
-+	    (state->stats).comp_bytes += olen;
-+	    (state->stats).comp_packets++;
-+	}
-+    } else { /* Do encryption with or without compression */
-+	state->bits |= MPPE_BIT_ENCRYPTED;
-+	if (!state->mppc && state->mppe) { /* Do only encryption */
-+	    /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */
-+	    arc4_encrypt(state, ibuf, isize - off, wptr);
-+	    olen = isize - (off - 2) + MPPE_OVHD;
-+	    (state->stats).inc_bytes += olen;
-+	    (state->stats).inc_packets++;
-+	} else { /* Do compression and then encryption - RFC3078 */
-+	    complen = mppc_compress(state, ibuf, wptr, isize - off,
-+				    osize - PPP_HDRLEN - (MPPE_OVHD / 2));
-+	    /*
-+	     * TODO: Implement an heuristics to handle packet expansion in a smart
-+	     * way. Now, when a packet expands, we send it as uncompressed and
-+	     * when next packet is sent we have to reset compressor's history.
-+	     * Maybe it would be good to send such packet as compressed in order
-+	     * to keep history's continuity.
-+	     */
-+	    if ((complen > isize) || (complen > osize - PPP_HDRLEN) ||
-+		(complen == 0)) {
-+		/* packet expands */
-+		state->nextflushed = 1;
-+		arc4_encrypt(state, ibuf, isize - off, wptr);
-+		olen = isize - (off - 2) + MPPE_OVHD;
-+		(state->stats).inc_bytes += olen;
-+		(state->stats).inc_packets++;
-+	    } else {
-+		state->bits |= MPPE_BIT_COMP;
-+		/* Hack warning !!! RC4 implementation which we use does
-+		   encryption "in place" - it means that input and output
-+		   buffers can be *the same* memory area. Therefore we don't
-+		   need to use a temporary buffer. But be careful - other
-+		   implementations don't have to be so nice.
-+		   I used to use ibuf as temporary buffer here, but it led
-+		   packet sniffers into error. Thanks to Wilfried Weissmann
-+		   for pointing that. */
-+		arc4_encrypt(state, wptr, complen, wptr);
-+		olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2);
-+		(state->stats).comp_bytes += olen;
-+		(state->stats).comp_packets++;
-+	    }
-+	}
-+    }
-+
-+    /* write status bits and coherency counter into the output buffer */
-+    wptr = obuf + PPP_HDRLEN;
-+    wptr[0] = MPPE_CTRLHI(state);
-+    wptr[1] = MPPE_CTRLLO(state);
-+
-+    state->bits = 0;
-+
-+    (state->stats).unc_bytes += isize;
-+    (state->stats).unc_packets++;
-+
-+    return olen;
-+}
-+
-+/***************************/
-+/*** Decompression stuff ***/
-+/***************************/
-+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l)
-+{
-+    static const u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff};
-+    u32 res, ol;
-+
-+    ol = *l;
-+    if (*l >= n) {
-+	*l = (*l) - n;
-+	res = (buf[*i] & m[ol]) >> (*l);
-+	if (*l == 0) {
-+	    *l = 8;
-+	    (*i)++;
-+	}
-+    } else {
-+	*l = 8 - n + (*l);
-+	res = (buf[(*i)++] & m[ol]) << 8;
-+	res = (res | buf[*i]) >> (*l);
-+    }
-+
-+    return res;
-+}
-+
-+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l)
-+{
-+    if (l == 8) {
-+	return buf[i];
-+    } else {
-+	return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff;
-+    }
-+}
-+
-+static inline void lamecopy(u8 *dst, u8 *src, u32 len)
-+{
-+    while (len--)
-+	*dst++ = *src++;
-+}
-+
-+static int
-+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+		unsigned char *obuf, int isize, int osize)
-+{
-+    u32 olen, off, len, bits, val, sig, i, l;
-+    u8 *history, *s;
-+
-+    history = state->hist + state->histptr;
-+    olen = len = i = 0;
-+    l = 8;
-+    bits = isize * 8;
-+    while (bits >= 8) {
-+	val = getbyte(ibuf, i++, l);
-+	if (val < 0x80) {		/* literal byte < 0x80 */
-+	    if (state->histptr < 2*MPPE_HIST_LEN) {
-+		/* copy uncompressed byte to the history */
-+		(state->hist)[(state->histptr)++] = (u8) val;
-+	    } else {
-+		/* buffer overflow; drop packet */
-+		if (state->debug)
-+		    printk(KERN_ERR "%s%d: trying to write outside history "
-+			   "buffer\n", __FUNCTION__, state->unit);
-+		return DECOMP_ERROR;
-+	    }
-+	    olen++;
-+	    bits -= 8;
-+	    continue;
-+	}
-+
-+	sig = val & 0xc0;
-+	if (sig == 0x80) {		/* literal byte >= 0x80 */
-+	    if (state->histptr < 2*MPPE_HIST_LEN) {
-+		/* copy uncompressed byte to the history */
-+		(state->hist)[(state->histptr)++] = 
-+		    (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l));
-+	    } else {
-+		/* buffer overflow; drop packet */
-+		if (state->debug)
-+		    printk(KERN_ERR "%s%d: trying to write outside history "
-+			   "buffer\n", __FUNCTION__, state->unit);
-+		return DECOMP_ERROR;
-+	    }
-+	    olen++;
-+	    bits -= 9;
-+	    continue;
-+	}
-+
-+	/* Not a literal byte so it must be an (offset,length) pair */
-+	/* decode offset */
-+	sig = val & 0xf0;
-+	if (sig == 0xf0) {		/* 10-bit offset; 0 <= offset < 64 */
-+	    off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l));
-+	    bits -= 10;
-+	} else {
-+	    if (sig == 0xe0) {		/* 12-bit offset; 64 <= offset < 320 */
-+		off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64);
-+		bits -= 12;
-+	    } else {
-+		if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */
-+		    off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320);
-+		    bits -= 16;
-+		    if (off > MPPE_HIST_LEN - 1) {
-+			if (state->debug)
-+			    printk(KERN_DEBUG "%s%d: too big offset value: %d\n",
-+				   __FUNCTION__, state->unit, off);
-+			return DECOMP_ERROR;
-+		    }
-+		} else {		/* this shouldn't happen */
-+		    if (state->debug)
-+			printk(KERN_DEBUG "%s%d: cannot decode offset value\n",
-+			       __FUNCTION__, state->unit);
-+		    return DECOMP_ERROR;
-+		}
-+	    }
-+	}
-+	/* decode length of match */
-+	val = getbyte(ibuf, i, l);
-+	if ((val & 0x80) == 0x00) {			/* len = 3 */
-+	    len = 3;
-+	    bits--;
-+	    getbits(ibuf, 1 , &i ,&l);
-+	} else if ((val & 0xc0) == 0x80) {		/* 4 <= len < 8 */
-+	    len = 0x04 | ((val>>4) & 0x03);
-+	    bits -= 4;
-+	    getbits(ibuf, 4 , &i ,&l);
-+	} else if ((val & 0xe0) == 0xc0) {		/* 8 <= len < 16 */
-+	    len = 0x08 | ((val>>2) & 0x07);
-+	    bits -= 6;
-+	    getbits(ibuf, 6 , &i ,&l);
-+	} else if ((val & 0xf0) == 0xe0) {		/* 16 <= len < 32 */
-+	    len = 0x10 | (val & 0x0f);
-+	    bits -= 8;
-+	    i++;
-+	} else {
-+	    bits -= 8;
-+	    val = (val << 8) | getbyte(ibuf, ++i, l);
-+	    if ((val & 0xf800) == 0xf000) {		/* 32 <= len < 64 */
-+		len = 0x0020 | ((val >> 6) & 0x001f);
-+		bits -= 2;
-+		getbits(ibuf, 2 , &i ,&l);
-+	    } else if ((val & 0xfc00) == 0xf800) {	/* 64 <= len < 128 */
-+		len = 0x0040 | ((val >> 4) & 0x003f);
-+		bits -= 4;
-+		getbits(ibuf, 4 , &i ,&l);
-+	    } else if ((val & 0xfe00) == 0xfc00) {	/* 128 <= len < 256 */
-+		len = 0x0080 | ((val >> 2) & 0x007f);
-+		bits -= 6;
-+		getbits(ibuf, 6 , &i ,&l);
-+	    } else if ((val & 0xff00) == 0xfe00) {	/* 256 <= len < 512 */
-+		len = 0x0100 | (val & 0x00ff);
-+		bits -= 8;
-+		i++;
-+	    } else {
-+		bits -= 8;
-+		val = (val << 8) | getbyte(ibuf, ++i, l);
-+		if ((val & 0xff8000) == 0xff0000) {	/* 512 <= len < 1024 */
-+		    len = 0x000200 | ((val >> 6) & 0x0001ff);
-+		    bits -= 2;
-+		    getbits(ibuf, 2 , &i ,&l);
-+		} else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */
-+		    len = 0x000400 | ((val >> 4) & 0x0003ff);
-+		    bits -= 4;
-+		    getbits(ibuf, 4 , &i ,&l);
-+		} else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */
-+		    len = 0x000800 | ((val >> 2) & 0x0007ff);
-+		    bits -= 6;
-+		    getbits(ibuf, 6 , &i ,&l);
-+		} else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */
-+		    len = 0x001000 | (val & 0x000fff);
-+		    bits -= 8;
-+		    i++;
-+		} else {				/* this shouldn't happen */
-+		    if (state->debug)
-+			printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n",
-+			       __FUNCTION__, state->unit, val);
-+		    return DECOMP_ERROR;
-+		}
-+	    }
-+	}
-+	s = state->hist + state->histptr;
-+	state->histptr += len;
-+	olen += len;
-+	if (state->histptr < 2*MPPE_HIST_LEN) {
-+	    /* copy uncompressed bytes to the history */
-+
-+	    /* In some cases len may be greater than off. It means that memory
-+	     * areas pointed by s and s-off overlap. I had used memmove() here
-+	     * because I thought that it acts as libc's version. Unfortunately,
-+	     * I was wrong. :-) I got strange errors sometimes. Wilfried suggested
-+	     * using of byte by byte copying here and strange errors disappeared.
-+	     */
-+	    lamecopy(s, s - off, len);
-+	} else {
-+	    /* buffer overflow; drop packet */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: trying to write outside history "
-+		       "buffer\n", __FUNCTION__, state->unit);
-+	    return DECOMP_ERROR;
-+	}
-+    }
-+
-+    /* Do PFC decompression */
-+    len = olen;
-+    if ((history[0] & 0x01) != 0) {
-+	obuf[0] = 0;
-+	obuf++;
-+	len++;
-+    }
-+
-+    if (len <= osize) {
-+	/* copy uncompressed packet to the output buffer */
-+	memcpy(obuf, history, olen);
-+    } else {
-+	/* buffer overflow; drop packet */
-+	if (state->debug)
-+	    printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n",
-+		   __FUNCTION__, state->unit, len + (PPP_HDRLEN / 2));
-+	return DECOMP_ERROR;
-+    }
-+
-+    return (int) len;
-+}
-+
-+int
-+mppe_decompress(void *arg, unsigned char *ibuf, int isize,
-+		unsigned char *obuf, int osize)
-+{
-+    struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+    int seq, bits, uncomplen;
-+
-+    if (isize <= PPP_HDRLEN + MPPE_OVHD) {
-+	if (state->debug) {
-+	    printk(KERN_DEBUG "%s%d: short packet (len=%d)\n",  __FUNCTION__,
-+		   state->unit, isize);
-+	}
-+	return DECOMP_ERROR;
-+    }
-+
-+    /* Get coherency counter and control bits from input buffer */
-+    seq = MPPE_CCOUNT(ibuf);
-+    bits = MPPE_BITS(ibuf);
-+
-+    if (state->stateless) {
-+	/* RFC 3078, sec 8.1. */
-+	mppe_increase_ccount(state);
-+	if ((seq != state->ccount) && state->debug)
-+	    printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+		   __FUNCTION__, state->unit, seq, state->ccount);
-+	while (seq != state->ccount)
-+	    mppe_increase_ccount(state);
-+    } else {
-+	/* RFC 3078, sec 8.2. */
-+	if (state->flushexpected) { /* discard state */
-+	    if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */
-+		while (seq != state->ccount)
-+		    mppe_increase_ccount(state);
-+		state->flushexpected = 0;
-+	    } else /* drop packet*/
-+		return DECOMP_ERROR;
-+	} else { /* normal state */
-+	    mppe_increase_ccount(state);
-+	    if (seq != state->ccount) {
-+		/* Packet loss detected, enter the discard state. */
-+		if (state->debug)
-+		    printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+			   __FUNCTION__, state->unit, seq, state->ccount);
-+		state->flushexpected = 1;
-+		return DECOMP_ERROR;
-+	    }
-+	}
-+	if (state->mppe && (bits & MPPE_BIT_FLUSHED)) {
-+	    arc4_setkey(state, state->session_key, state->keylen);
-+	}
-+    }
-+
-+    if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) {
-+	state->histptr = MPPE_HIST_LEN;
-+	if ((bits & MPPE_BIT_FLUSHED)) {
-+	    memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+	} else
-+	    if ((bits & MPPE_BIT_RESET)) {
-+		memcpy(state->hist, state->hist + MPPE_HIST_LEN, MPPE_HIST_LEN);
-+	    }
-+    }
-+
-+    /* Fill in the first part of the PPP header. The protocol field
-+       comes from the decompressed data. */
-+    obuf[0] = PPP_ADDRESS(ibuf);
-+    obuf[1] = PPP_CONTROL(ibuf);
-+    obuf += PPP_HDRLEN / 2;
-+
-+    if (state->mppe) { /* process encrypted packet */
-+	if ((bits & MPPE_BIT_ENCRYPTED)) {
-+	    /* OK, packet encrypted, so decrypt it */
-+	    if (state->mppc && (bits & MPPE_BIT_COMP)) {
-+		/* Hack warning !!! RC4 implementation which we use does
-+		   decryption "in place" - it means that input and output
-+		   buffers can be *the same* memory area. Therefore we don't
-+		   need to use a temporary buffer. But be careful - other
-+		   implementations don't have to be so nice. */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2), isize -
-+			     PPP_HDRLEN - (MPPE_OVHD / 2), ibuf + PPP_HDRLEN +
-+			     (MPPE_OVHD / 2));
-+		uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN +
-+					    (MPPE_OVHD / 2), obuf, isize -
-+					    PPP_HDRLEN - (MPPE_OVHD / 2),
-+					    osize - (PPP_HDRLEN / 2));
-+		if (uncomplen == DECOMP_ERROR) {
-+		    state->flushexpected = 1;
-+		    return DECOMP_ERROR;
-+		}
-+		uncomplen += PPP_HDRLEN / 2;
-+		(state->stats).comp_bytes += isize;
-+		(state->stats).comp_packets++;
-+	    } else {
-+		uncomplen = isize - MPPE_OVHD;
-+		/* Decrypt the first byte in order to check if it is
-+		   compressed or uncompressed protocol field */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2), 1, obuf);
-+		/* Do PFC decompression */
-+		if ((obuf[0] & 0x01) != 0) {
-+		    obuf[1] = obuf[0];
-+		    obuf[0] = 0;
-+		    obuf++;
-+		    uncomplen++;
-+		}
-+		/* And finally, decrypt the rest of the frame. */
-+		arc4_decrypt(state, ibuf + PPP_HDRLEN +	(MPPE_OVHD / 2) + 1,
-+			     isize - PPP_HDRLEN - (MPPE_OVHD / 2) - 1, obuf + 1);
-+		(state->stats).inc_bytes += isize;
-+		(state->stats).inc_packets++;
-+	    }
-+	} else { /* this shouldn't happen */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: encryption negotiated but not an "
-+		       "encrypted packet received\n", __FUNCTION__, state->unit);
-+	    mppe_change_key(state, 0);
-+	    state->flushexpected = 1;
-+	    return DECOMP_ERROR;
-+	}
-+    } else {
-+	if (state->mppc) { /* no MPPE, only MPPC */
-+	    if ((bits & MPPE_BIT_COMP)) {
-+		uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN +
-+					    (MPPE_OVHD / 2), obuf, isize -
-+					    PPP_HDRLEN - (MPPE_OVHD / 2),
-+					    osize - (PPP_HDRLEN / 2));
-+		if (uncomplen == DECOMP_ERROR) {
-+		    state->flushexpected = 1;
-+		    return DECOMP_ERROR;
-+		}
-+		uncomplen += PPP_HDRLEN / 2;
-+		(state->stats).comp_bytes += isize;
-+		(state->stats).comp_packets++;
-+	    } else {
-+		memcpy(obuf, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize -
-+		       PPP_HDRLEN - (MPPE_OVHD / 2));
-+		uncomplen = isize - MPPE_OVHD;
-+		(state->stats).inc_bytes += isize;
-+		(state->stats).inc_packets++;
-+	    }
-+	} else { /* this shouldn't happen */
-+	    if (state->debug)
-+		printk(KERN_ERR "%s%d: error - not an  MPPC or MPPE frame "
-+		       "received\n", __FUNCTION__, state->unit);
-+	    state->flushexpected = 1;
-+	    return DECOMP_ERROR;
-+	}
-+    }
-+
-+    (state->stats).unc_bytes += uncomplen;
-+    (state->stats).unc_packets++;
-+
-+    return uncomplen;
-+}
-+
-+
-+/************************************************************
-+ * Module interface table
-+ ************************************************************/
-+
-+/* These are in ppp_generic.c */
-+extern int  ppp_register_compressor   (struct compressor *cp);
-+extern void ppp_unregister_compressor (struct compressor *cp);
-+
-+/*
-+ * Functions exported to ppp_generic.c.
-+ *
-+ * In case of MPPC/MPPE there is no need to process incompressible data
-+ * because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp)
-+ * callback function isn't needed.
-+ */
-+struct compressor ppp_mppe = {
-+    .compress_proto =	CI_MPPE,
-+    .comp_alloc =	mppe_comp_alloc,
-+    .comp_free =	mppe_comp_free,
-+    .comp_init =	mppe_comp_init,
-+    .comp_reset =	mppe_comp_reset,
-+    .compress =		mppe_compress,
-+    .comp_stat =	mppe_stats,
-+    .decomp_alloc =	mppe_decomp_alloc,
-+    .decomp_free =	mppe_comp_free,
-+    .decomp_init =	mppe_decomp_init,
-+    .decomp_reset =	mppe_decomp_reset,
-+    .decompress =	mppe_decompress,
-+    .incomp =		NULL,
-+    .decomp_stat =	mppe_stats,
-+    .owner =		THIS_MODULE
-+};
-+
-+/************************************************************
-+ * Module support routines
-+ ************************************************************/
-+
-+int __init mppe_module_init(void)
-+{
-+    int answer;
-+
-+    if (!(crypto_alg_available("arc4", 0) && crypto_alg_available("sha1", 0))) {
-+	printk(KERN_ERR "Kernel doesn't provide ARC4 and/or SHA1 algorithms "
-+	       "required by MPPE/MPPC. Check CryptoAPI configuration.\n");
-+	return -ENODEV;
-+    }
-+
-+    /* Allocate space for SHAPad1, SHAPad2 and ... */
-+    sha_pad = kmalloc(sizeof(struct sha_pad), GFP_KERNEL);
-+    if (sha_pad == NULL)
-+	return -ENOMEM;
-+    /* ... initialize them */
-+    memset(sha_pad->sha_pad1, 0x00, sizeof(sha_pad->sha_pad1));
-+    memset(sha_pad->sha_pad2, 0xf2, sizeof(sha_pad->sha_pad2));
-+
-+    answer = ppp_register_compressor(&ppp_mppe);
-+    if (answer == 0) {
-+	printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n");
-+    }
-+    return answer;
-+}
-+
-+void __exit mppe_module_cleanup(void)
-+{
-+    kfree(sha_pad);
-+    ppp_unregister_compressor(&ppp_mppe);
-+    printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n");
-+}
-+
-+module_init(mppe_module_init);
-+module_exit(mppe_module_cleanup);
-+
-+MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>");
-+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux");
-+MODULE_VERSION("1.2");
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
-diff -ruN linux-2.6.12.orig/include/linux/ppp-comp.h linux-2.6.12/include/linux/ppp-comp.h
---- linux-2.6.12.orig/include/linux/ppp-comp.h	2004-12-24 22:33:47.000000000 +0100
-+++ linux-2.6.12/include/linux/ppp-comp.h	2005-06-28 20:07:01.000000000 +0200
-@@ -28,7 +28,7 @@
-  */
- 
- /*
-- *  ==FILEVERSION 980319==
-+ *  ==FILEVERSION 20040509==
-  *
-  *  NOTE TO MAINTAINERS:
-  *     If you modify this file at all, please set the above date.
-@@ -80,7 +80,7 @@
- 
- 	/* Compress a packet */
- 	int     (*compress) (void *state, unsigned char *rptr,
--			      unsigned char *obuf, int isize, int osize);
-+			     unsigned char *obuf, int isize, int osize);
- 
- 	/* Return compression statistics */
- 	void	(*comp_stat) (void *state, struct compstat *stats);
-@@ -101,7 +101,7 @@
- 
- 	/* Decompress a packet. */
- 	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
--				unsigned char *obuf, int osize);
-+			       unsigned char *obuf, int osize);
- 
- 	/* Update state for an incompressible packet received */
- 	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
-@@ -191,6 +191,42 @@
- #define DEFLATE_CHK_SEQUENCE	0
- 
- /*
-+ * Definitions for MPPE/MPPC.
-+ */
-+
-+#define CI_MPPE			18	/* config option for MPPE */
-+#define CILEN_MPPE		6	/* length of config option */
-+
-+#define MPPE_OVHD		4	/* MPPE overhead */
-+#define MPPE_MAX_KEY_LEN	16	/* largest key length (128-bit) */
-+
-+#define MPPE_STATELESS          0x01	/* configuration bit H */
-+#define MPPE_40BIT              0x20	/* configuration bit L */
-+#define MPPE_56BIT              0x80	/* configuration bit M */
-+#define MPPE_128BIT             0x40	/* configuration bit S */
-+#define MPPE_MPPC               0x01	/* configuration bit C */
-+
-+/*
-+ * Definitions for Stac LZS.
-+ */
-+
-+#define CI_LZS			17	/* config option for Stac LZS */
-+#define CILEN_LZS		5	/* length of config option */
-+
-+#define LZS_OVHD		4	/* max. LZS overhead */
-+#define LZS_HIST_LEN		2048	/* LZS history size */
-+#define LZS_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
-+
-+#define LZS_MODE_NONE		0
-+#define LZS_MODE_LCB		1
-+#define LZS_MODE_CRC		2
-+#define LZS_MODE_SEQ		3
-+#define LZS_MODE_EXT		4
-+
-+#define LZS_EXT_BIT_FLUSHED	0x80	/* bit A */
-+#define LZS_EXT_BIT_COMP	0x20	/* bit C */
-+
-+/*
-  * Definitions for other, as yet unsupported, compression methods.
-  */
- 
diff --git a/packages/linux/linux-dht-walnut-2.6.12/ppc_40x_uboot.patch b/packages/linux/linux-dht-walnut-2.6.12/ppc_40x_uboot.patch
deleted file mode 100644
index fcb700c5b4..0000000000
--- a/packages/linux/linux-dht-walnut-2.6.12/ppc_40x_uboot.patch
+++ /dev/null
@@ -1,693 +0,0 @@
-diff-tree 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 (from 90eb2665841d7b444602736e2141a01c948f75b1)

-Author: Matt Porter <mporter@kernel.crashing.org>

-Date:   Mon Nov 7 00:58:15 2005 -0800

-

-    [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot

-    

-    Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot

-    as bootloader.  The OpenBIOS bd_info struct is not used in the kernel

-    anymore (only U-Boot now).

-    

-    uImage (U-Boot) tested on walnut, sycamore and bubinga

-    zImage (OpenBIOS) tested on sycamore, bubinga and ebony

-    

-    Signed-off-by: Stefan Roese <sr@denx.de>

-    Signed-off-by: Matt Porter <mporter@kernel.crashing.org>

-    Signed-off-by: Andrew Morton <akpm@osdl.org>

-    Signed-off-by: Linus Torvalds <torvalds@osdl.org>

-

-diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile

-index ff0904e..82df88b 100644

---- a/arch/ppc/boot/simple/Makefile

-+++ b/arch/ppc/boot/simple/Makefile

-@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO)		:= zImage

-   entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000

-      extra.o-$(CONFIG_BAMBOO)		:= pibs.o

- 

-+      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE

-+zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE

-+         end-$(CONFIG_BUBINGA)		:= bubinga

-+  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000

-+     extra.o-$(CONFIG_BUBINGA)		:= openbios.o

-+

-       zimage-$(CONFIG_EBONY)		:= zImage-TREE

- zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE

-          end-$(CONFIG_EBONY)		:= ebony

-@@ -91,6 +97,18 @@ zimageinitrd-$(CONFIG_OCOTEA)		:= zImage

-   entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000

-      extra.o-$(CONFIG_OCOTEA)		:= pibs.o

- 

-+      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE

-+zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE

-+         end-$(CONFIG_SYCAMORE)		:= sycamore

-+  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000

-+     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o

-+

-+      zimage-$(CONFIG_WALNUT)		:= zImage-TREE

-+zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE

-+         end-$(CONFIG_WALNUT)		:= walnut

-+  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000

-+     extra.o-$(CONFIG_WALNUT)		:= openbios.o

-+

-      extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o

-          end-$(CONFIG_EV64260)		:= ev64260

-    cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)

-@@ -168,7 +186,8 @@ OBJCOPY_ARGS			:= -O elf32-powerpc

- 

- # head.o and relocate.o must be at the start.

- boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)

--boot-$(CONFIG_40x)		+= embed_config.o

-+boot-$(CONFIG_REDWOOD_5)	+= embed_config.o

-+boot-$(CONFIG_REDWOOD_6)	+= embed_config.o

- boot-$(CONFIG_8xx)		+= embed_config.o

- boot-$(CONFIG_8260)		+= embed_config.o

- boot-$(CONFIG_BSEIP)		+= iic.o

-diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c

-index e02de5b..f415d6c 100644

---- a/arch/ppc/boot/simple/misc.c

-+++ b/arch/ppc/boot/simple/misc.c

-@@ -23,7 +23,7 @@

- #include <asm/page.h>

- #include <asm/mmu.h>

- #include <asm/bootinfo.h>

--#ifdef CONFIG_44x

-+#ifdef CONFIG_4xx

- #include <asm/ibm4xx.h>

- #endif

- #include <asm/reg.h>

-@@ -88,6 +88,14 @@ get_mem_size(void)

- 	return 0;

- }

- 

-+#if defined(CONFIG_40x)

-+#define PPC4xx_EMAC0_MR0	EMAC0_BASE

-+#endif

-+

-+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)

-+#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0

-+#endif

-+

- struct bi_record *

- decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)

- {

-@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_add

- 	com_port = serial_init(0, NULL);

- #endif

- 

--#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)

-+#if defined(PPC4xx_EMAC0_MR0)

- 	/* Reset MAL */

- 	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);

- 	/* Wait for reset */

- 	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};

- 	/* Reset EMAC */

--	*(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;

-+	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;

- 	__asm__ __volatile__("eieio");

- #endif

- 

-@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_add

- 		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");

- 	}

- 

-+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */

- 	avail_ram = (char *)0x00400000;

-+#endif

- 	end_avail = (char *)0x00800000;

- 	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");

- 	puthex((unsigned long)end_avail); puts("\n");

-diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c

-index c732b6d..81f11d8 100644

---- a/arch/ppc/boot/simple/openbios.c

-+++ b/arch/ppc/boot/simple/openbios.c

-@@ -1,19 +1,43 @@

- /*

-  * arch/ppc/boot/simple/openbios.c

-  *

-- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-+ *

-+ * Based on original work by

-+ *      2005 (c) SYSGO AG - g.jaeger@sysgo.com

-+ *

-  * This file is licensed under the terms of the GNU General Public

-  * License version 2.  This program is licensed "as is" without

-  * any warranty of any kind, whether express or implied.

-  *

-- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)

-  */

- 

- #include <linux/types.h>

- #include <linux/config.h>

- #include <linux/string.h>

- #include <asm/ppcboot.h>

--#include <platforms/4xx/ebony.h>

-+#include <asm/ibm4xx.h>

-+#include <asm/reg.h>

-+#ifdef CONFIG_40x

-+#include <asm/io.h>

-+#endif

-+

-+#if defined(CONFIG_BUBINGA)

-+#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */

-+#else

-+#define BOARD_INFO_VECTOR	0xFFFE0B50

-+#endif

-+

-+#ifdef CONFIG_40x

-+/* Supply a default Ethernet address for those eval boards that don't

-+ * ship with one.  This is an address from the MBX board I have, so

-+ * it is unlikely you will find it on your network.

-+ */

-+static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };

-+

-+extern unsigned long timebase_period_ns;

-+#endif /* CONFIG_40x */

- 

- extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,

- 				       unsigned long cksum);

-@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(u

- bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));

- bd_t *hold_residual = &hold_resid_buf;

- 

-+typedef struct openbios_board_info {

-+        unsigned char    bi_s_version[4];       /* Version of this structure */

-+        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */

-+        unsigned int     bi_memsize;            /* DRAM installed, in bytes */

-+#ifdef CONFIG_405EP

-+        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */

-+#else /* CONFIG_405EP */

-+        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */

-+#endif /* CONFIG_405EP */

-+        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */

-+        unsigned int     bi_intfreq;            /* Processor speed, in Hz */

-+        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */

-+        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */

-+#ifdef CONFIG_405EP

-+        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */

-+        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */

-+#endif /* CONFIG_405EP */

-+} openbios_bd_t;

-+

- void *

- load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,

- 		void *ign1, void *ign2)

- {

--	decompress_kernel(load_addr, num_words, cksum);

-+#ifdef CONFIG_40x

-+	openbios_bd_t *openbios_bd = NULL;

-+	openbios_bd_t *(*get_board_info)(void) =

-+		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);

-+

-+	/*

-+	 * On 40x platforms we not only need the MAC-addresses, but also the

-+	 * clocks and memsize. Now try to get all values using the OpenBIOS

-+	 * "get_board_info()" callback.

-+	 */

-+	if ((openbios_bd = get_board_info()) != NULL) {

-+		/*

-+		 * Copy bd_info from OpenBIOS struct into U-Boot struct

-+		 * used by kernel

-+		 */

-+	        hold_residual->bi_memsize = openbios_bd->bi_memsize;

-+	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;

-+	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;

-+	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;

-+		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);

-+#ifdef CONFIG_405EP

-+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);

-+		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);

-+	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;

-+	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;

-+#else /* CONFIG_405EP */

-+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);

-+#endif /* CONFIG_405EP */

-+	} else {

-+		/* Hmmm...better try to stuff some defaults.

-+		 */

-+		hold_residual->bi_memsize = 16 * 1024 * 1024;

-+		hold_residual->bi_intfreq = 200000000;

-+		hold_residual->bi_busfreq = 100000000;

-+		hold_residual->bi_pci_busfreq = 66666666;

-+

-+		/*

-+		 * Only supply one mac-address in this fallback

-+		 */

-+		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);

-+#ifdef CONFIG_405EP

-+	        hold_residual->bi_opbfreq = 50000000;

-+	        hold_residual->bi_procfreq = 200000000;

-+#endif /* CONFIG_405EP */

-+	}

-+

-+	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;

-+#endif /* CONFIG_40x */

- 

-+#ifdef CONFIG_440GP

- 	/* simply copy the MAC addresses */

--	memcpy(hold_residual->bi_enetaddr,  (char *)EBONY_OPENBIOS_MAC_BASE, 6);

--	memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);

-+	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);

-+	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);

-+#endif /* CONFIG_440GP */

-+

-+	decompress_kernel(load_addr, num_words, cksum);

- 

- 	return (void *)hold_residual;

- }

-diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig

-index e70e4c6..d883791 100644

---- a/arch/ppc/platforms/4xx/Kconfig

-+++ b/arch/ppc/platforms/4xx/Kconfig

-@@ -225,7 +225,7 @@ config EMBEDDEDBOOT

- 

- config IBM_OPENBIOS

- 	bool

--	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT

-+	depends on ASH || REDWOOD_5 || REDWOOD_6

- 	default y

- 

- config PPC4xx_DMA

-diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c

-index 3678abf..8110f55 100644

---- a/arch/ppc/platforms/4xx/bubinga.c

-+++ b/arch/ppc/platforms/4xx/bubinga.c

-@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)

-           * by 16.

-           */

- 	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);

--	uart_clock = __res.bi_pllouta_freq / uart_div;

-+	uart_clock = __res.bi_procfreq / uart_div;

- 

- 	/* Setup serial port access */

- 	memset(&port, 0, sizeof(port));

-diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h

-index b1df856..b5380cf 100644

---- a/arch/ppc/platforms/4xx/bubinga.h

-+++ b/arch/ppc/platforms/4xx/bubinga.h

-@@ -1,52 +1,34 @@

- /*

-- * Support for IBM PPC 405EP evaluation board (Bubinga).

-+ * arch/ppc/platforms/4xx/bubinga.h

-  *

-- * Author: SAW (IBM), derived from walnut.h.

-- *         Maintained by MontaVista Software <source@mvista.com>

-+ * Bubinga board definitions

-+ *

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-+ *

-+ * Based on original work by

-+ *	SAW (IBM)

-+ *	2003 (c) MontaVista Softare Inc.

-+ *

-+ * This program is free software; you can redistribute  it and/or modify it

-+ * under  the terms of  the GNU General  Public License as published by the

-+ * Free Software Foundation;  either version 2 of the  License, or (at your

-+ * option) any later version.

-  *

-- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the

-- * terms of the GNU General Public License version 2. This program is

-- * licensed "as is" without any warranty of any kind, whether express

-- * or implied.

-  */

- 

- #ifdef __KERNEL__

- #ifndef __BUBINGA_H__

- #define __BUBINGA_H__

- 

--/* 405EP */

-+#include <linux/config.h>

- #include <platforms/4xx/ibm405ep.h>

--

--#ifndef __ASSEMBLY__

--/*

-- * Data structure defining board information maintained by the boot

-- * ROM on IBM's evaluation board. An effort has been made to

-- * keep the field names consistent with the 8xx 'bd_t' board info

-- * structures.

-- */

--

--typedef struct board_info {

--        unsigned char    bi_s_version[4];       /* Version of this structure */

--        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */

--        unsigned int     bi_memsize;            /* DRAM installed, in bytes */

--        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */

--        unsigned int     bi_intfreq;            /* Processor speed, in Hz */

--        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */

--        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */

--        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */

--        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */

--} bd_t;

--

--/* Some 4xx parts use a different timebase frequency from the internal clock.

--*/

--#define bi_tbfreq bi_intfreq

--

-+#include <asm/ppcboot.h>

- 

- /* Memory map for the Bubinga board.

-  * Generic 4xx plus RTC.

-  */

- 

--extern void *bubinga_rtc_base;

- #define BUBINGA_RTC_PADDR	((uint)0xf0000000)

- #define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR

- #define BUBINGA_RTC_SIZE	((uint)8*1024)

-@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;

-  * for typical configurations at various CPU speeds.

-  * The base baud is calculated as (FWDA / EXT UART DIV / 16)

-  */

--#define BASE_BAUD       0

-+#define BASE_BAUD		0

- 

--#define BUBINGA_FPGA_BASE      0xF0300000

-+/* Flash */

-+#define PPC40x_FPGA_BASE	0xF0300000

-+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */

-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)

-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)

-+#define PPC40x_FLASH_LOW	0xFFF00000

-+#define PPC40x_FLASH_HIGH	0xFFF80000

-+#define PPC40x_FLASH_SIZE	0x80000

- 

--#define PPC4xx_MACHINE_NAME     "IBM Bubinga"

-+#define PPC4xx_MACHINE_NAME	"IBM Bubinga"

- 

--#endif /* !__ASSEMBLY__ */

- #endif /* __BUBINGA_H__ */

- #endif /* __KERNEL__ */

-diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h

-index d08faa4..b91ad42 100644

---- a/arch/ppc/platforms/4xx/ebony.h

-+++ b/arch/ppc/platforms/4xx/ebony.h

-@@ -24,8 +24,8 @@

- #define PPC44x_EMAC0_MR0	0xE0000800

- 

- /* Where to find the MAC info */

--#define EBONY_OPENBIOS_MAC_BASE   0xfffffe0c

--#define EBONY_OPENBIOS_MAC_OFFSET 0x0c

-+#define OPENBIOS_MAC_BASE	0xfffffe0c

-+#define OPENBIOS_MAC_OFFSET	0x0c

- 

- /* Default clock rates for Rev. B and Rev. C silicon */

- #define EBONY_440GP_RB_SYSCLK	33000000

-diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c

-index d8019ee..281b4a2 100644

---- a/arch/ppc/platforms/4xx/sycamore.c

-+++ b/arch/ppc/platforms/4xx/sycamore.c

-@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsi

- void __init

- sycamore_setup_arch(void)

- {

--#define SYCAMORE_PS2_BASE	0xF0100000

--#define SYCAMORE_FPGA_BASE	0xF0300000

--

- 	void *fpga_brdc;

- 	unsigned char fpga_brdc_data;

- 	void *fpga_enable;

-@@ -100,7 +97,7 @@ sycamore_setup_arch(void)

- 

- 	ppc4xx_setup_arch();

- 

--	ibm_ocp_set_emac(0, 1);

-+	ibm_ocp_set_emac(0, 0);

- 

- 	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);

- 	if (!kb_data) {

-@@ -111,7 +108,7 @@ sycamore_setup_arch(void)

- 

- 	kb_cs = kb_data + 1;

- 

--	fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);

-+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);

- 	if (!fpga_status) {

- 		printk(KERN_CRIT

- 		       "sycamore_setup_arch() fpga_status ioremap failed\n");

-diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h

-index 3e7b4e2..1cd6c82 100644

---- a/arch/ppc/platforms/4xx/sycamore.h

-+++ b/arch/ppc/platforms/4xx/sycamore.h

-@@ -1,67 +1,52 @@

- /*

-  * arch/ppc/platforms/4xx/sycamore.h

-  *

-- * Macros, definitions, and data structures specific to the IBM PowerPC

-- * 405GPr "Sycamore" evaluation board.

-+ * Sycamore board definitions

-  *

-- * Author: Armin Kuster <akuster@mvista.com>

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-+ *

-+ * Based on original work by

-+ * 	Armin Kuster <akuster@mvista.com>

-+ *	2000 (c) MontaVista, Software, Inc.

-+ *

-+ * This program is free software; you can redistribute  it and/or modify it

-+ * under  the terms of  the GNU General  Public License as published by the

-+ * Free Software Foundation;  either version 2 of the  License, or (at your

-+ * option) any later version.

-  *

-- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under

-- * the terms of the GNU General Public License version 2.  This program

-- * is licensed "as is" without any warranty of any kind, whether express

-- * or implied.

-  */

- 

- #ifdef __KERNEL__

- #ifndef __ASM_SYCAMORE_H__

- #define __ASM_SYCAMORE_H__

- 

-+#include <linux/config.h>

- #include <platforms/4xx/ibm405gpr.h>

-+#include <asm/ppcboot.h>

- 

--#ifndef __ASSEMBLY__

--/*

-- * Data structure defining board information maintained by the boot

-- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to

-- * keep the field names consistent with the 8xx 'bd_t' board info

-- * structures.

-- */

--

--typedef struct board_info {

--	unsigned char	 bi_s_version[4];	/* Version of this structure */

--	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */

--	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */

--	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */

--	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */

--	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */

--	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */

--	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */

--} bd_t;

--

--/* Some 4xx parts use a different timebase frequency from the internal clock.

--*/

--#define bi_tbfreq bi_intfreq

--

--

--/* Memory map for the IBM "Sycamore" 405GP evaluation board.

-+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.

-  * Generic 4xx plus RTC.

-  */

- 

--extern void *sycamore_rtc_base;

- #define SYCAMORE_RTC_PADDR	((uint)0xf0000000)

- #define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR

--#define SYCAMORE_RTC_SIZE		((uint)8*1024)

-+#define SYCAMORE_RTC_SIZE	((uint)8*1024)

- 

--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK

--#define BASE_BAUD		201600

--#else

- #define BASE_BAUD		691200

--#endif

- 

--#define SYCAMORE_PS2_BASE		0xF0100000

--#define SYCAMORE_FPGA_BASE	0xF0300000

-+#define SYCAMORE_PS2_BASE	0xF0100000

-+

-+/* Flash */

-+#define PPC40x_FPGA_BASE	0xF0300000

-+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */

-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)

-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)

-+#define PPC40x_FLASH_LOW	0xFFF00000

-+#define PPC40x_FLASH_HIGH	0xFFF80000

-+#define PPC40x_FLASH_SIZE	0x80000

- 

- #define PPC4xx_MACHINE_NAME	"IBM Sycamore"

- 

--#endif /* !__ASSEMBLY__ */

- #endif /* __ASM_SYCAMORE_H__ */

- #endif /* __KERNEL__ */

-diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c

-index a33eda4..74cb331 100644

---- a/arch/ppc/platforms/4xx/walnut.c

-+++ b/arch/ppc/platforms/4xx/walnut.c

-@@ -90,7 +90,7 @@ walnut_setup_arch(void)

- 

- 	kb_cs = kb_data + 1;

- 

--	fpga_status = ioremap(WALNUT_FPGA_BASE, 8);

-+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);

- 	if (!fpga_status) {

- 		printk(KERN_CRIT

- 		       "walnut_setup_arch() fpga_status ioremap failed\n");

-diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h

-index 04cfbf3..dcf2691 100644

---- a/arch/ppc/platforms/4xx/walnut.h

-+++ b/arch/ppc/platforms/4xx/walnut.h

-@@ -1,72 +1,55 @@

- /*

-  * arch/ppc/platforms/4xx/walnut.h

-  *

-- * Macros, definitions, and data structures specific to the IBM PowerPC

-- * 405GP "Walnut" evaluation board.

-+ * Walnut board definitions

-  *

-- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand

-- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or

-- * source@mvista.com

-+ * Copyright (c) 2005 DENX Software Engineering

-+ * Stefan Roese <sr@denx.de>

-  *

-- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>

-+ * Based on original work by

-+ * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>

-+ *	Frank Rowand <frank_rowand@mvista.com>

-+ *	Debbie Chu <debbie_chu@mvista.com>

-+ *	2000 (c) MontaVista, Software, Inc.

-+ *

-+ * This program is free software; you can redistribute  it and/or modify it

-+ * under  the terms of  the GNU General  Public License as published by the

-+ * Free Software Foundation;  either version 2 of the  License, or (at your

-+ * option) any later version.

-  *

-- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under

-- * the terms of the GNU General Public License version 2.  This program

-- * is licensed "as is" without any warranty of any kind, whether express

-- * or implied.

-  */

- 

- #ifdef __KERNEL__

- #ifndef __ASM_WALNUT_H__

- #define __ASM_WALNUT_H__

- 

--/* We have a 405GP core */

-+#include <linux/config.h>

- #include <platforms/4xx/ibm405gp.h>

--

--#ifndef __ASSEMBLY__

--/*

-- * Data structure defining board information maintained by the boot

-- * ROM on IBM's "Walnut" evaluation board. An effort has been made to

-- * keep the field names consistent with the 8xx 'bd_t' board info

-- * structures.

-- */

--

--typedef struct board_info {

--	unsigned char	 bi_s_version[4];	/* Version of this structure */

--	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */

--	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */

--	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */

--	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */

--	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */

--	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */

--	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */

--} bd_t;

--

--/* Some 4xx parts use a different timebase frequency from the internal clock.

--*/

--#define bi_tbfreq bi_intfreq

--

-+#include <asm/ppcboot.h>

- 

- /* Memory map for the IBM "Walnut" 405GP evaluation board.

-  * Generic 4xx plus RTC.

-  */

- 

--extern void *walnut_rtc_base;

- #define WALNUT_RTC_PADDR	((uint)0xf0000000)

- #define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR

- #define WALNUT_RTC_SIZE		((uint)8*1024)

- 

--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK

--#define BASE_BAUD		201600

--#else

- #define BASE_BAUD		691200

--#endif

- 

- #define WALNUT_PS2_BASE		0xF0100000

--#define WALNUT_FPGA_BASE	0xF0300000

-+

-+/* Flash */

-+#define PPC40x_FPGA_BASE	0xF0300000

-+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */

-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)

-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)

-+#define PPC40x_FLASH_LOW	0xFFF00000

-+#define PPC40x_FLASH_HIGH	0xFFF80000

-+#define PPC40x_FLASH_SIZE	0x80000

-+#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE

- 

- #define PPC4xx_MACHINE_NAME	"IBM Walnut"

- 

--#endif /* !__ASSEMBLY__ */

- #endif /* __ASM_WALNUT_H__ */

- #endif /* __KERNEL__ */

-diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h

-index 6f10a25..9c21de1 100644

---- a/include/asm-ppc/ibm_ocp.h

-+++ b/include/asm-ppc/ibm_ocp.h

-@@ -131,9 +131,22 @@ static inline void ibm_ocp_set_emac(int 

- 	/* Copy MAC addresses to EMAC additions */

- 	for (i=start; i<=end; i++) {

- 		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);

--		memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

--				&__res.bi_enetaddr[i],

--				6);

-+		if (i == 0)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enetaddr, 6);

-+#if defined(CONFIG_405EP) || defined(CONFIG_44x)

-+		else if (i == 1)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enet1addr, 6);

-+#endif

-+#if defined(CONFIG_440GX)

-+		else if (i == 2)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enet2addr, 6);

-+		else if (i == 3)

-+			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,

-+			       __res.bi_enet3addr, 6);

-+#endif

- 	}

- }

- #endif

-diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h

-index fe24e45..6b7b63f 100644

---- a/include/asm-ppc/ppcboot.h

-+++ b/include/asm-ppc/ppcboot.h

-@@ -73,8 +73,8 @@ typedef struct bd_info {

- #if defined(CONFIG_HYMOD)

- 	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */

- #endif

--#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\

--	defined(CONFIG_83xx)

-+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \

-+	defined(CONFIG_85xx) ||	defined(CONFIG_83xx)

- 	/* second onboard ethernet port */

- 	unsigned char	bi_enet1addr[6];

- #endif

-@@ -96,5 +96,7 @@ typedef struct bd_info {

- #endif

- } bd_t;

- 

-+#define bi_tbfreq	bi_intfreq

-+

- #endif /* __ASSEMBLY__ */

- #endif	/* __ASM_PPCBOOT_H__ */

diff --git a/packages/linux/linux-dht-walnut_2.6.12.6.bb b/packages/linux/linux-dht-walnut_2.6.12.6.bb
deleted file mode 100644
index 7c0f434477..0000000000
--- a/packages/linux/linux-dht-walnut_2.6.12.6.bb
+++ /dev/null
@@ -1,74 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for DHT-Walnut (ppc)  machine"
-LICENSE = "GPL"
-PR = "r2"
-DEPENDS = "u-boot"
-
-KERNEL_CCSUFFIX = "-3.4.4"
-
-SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
-           file://ppc_40x_uboot.patch;patch=1 \
-           file://iw_we18-5.diff;patch=1 \
-           file://linux-2.6.12-mppe-mppc-1.3.patch;patch=1 \
-           file://dht-walnut_defconfig"
-
-
-S = "${WORKDIR}/linux-${PV}"
-
-inherit kernel
-
-
-FILES_kernel-image = "/boot/zImage.elf"
-
-export OS = "Linux"
-ARCH = "ppc"
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_OUTPUT = "arch/ppc/boot/images/zImage.elf"
-
-
-
-
-do_configure_prepend() {
-	install -m 0644 ${WORKDIR}/dht-walnut_defconfig ${S}/.config
-}
-
-do_stage_append () {
-#need ppc platforms includes + friends in order for external kernel modules to compile
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms
-       install -m 0755  arch/ppc/platforms/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx
-       install -m 0755  arch/ppc/platforms/4xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx
-       install -m 0755  arch/ppc/platforms/83xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx
-       install -m 0755  arch/ppc/platforms/85xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx
-
-       install -d ${STAGING_KERNEL_DIR}/include/asm-m68k
-       install -m 0755  include/asm-m68k/*.h ${STAGING_KERNEL_DIR}/include/asm-m68k
-}
-
-do_install_append () {
-        install -d  ${DEPLOY_DIR}/images
-        install -m 0755 arch/ppc/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf
-        install -m 0755 vmlinux ${DEPLOY_DIR}/images/
-        powerpc-${TARGET_OS}-objcopy -O binary -R .note -R .comment -S ${DEPLOY_DIR}/images/vmlinux ${DEPLOY_DIR}/images/linux.bin
-        gzip -f -9 ${DEPLOY_DIR}/images/linux.bin
-        mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "owmnr"+${PV}+"-ppc" -d ${DEPLOY_DIR}/images/linux.bin.gz ${DEPLOY_DIR}/images/uImage-${PV}-${MACHINE}-${DATETIME}.bin
-        rm ${DEPLOY_DIR}/images/vmlinux
-        rm ${DEPLOY_DIR}/images/linux.bin.gz
-
-
-}
-
-pkg_postinst_kernel () {
-        true
-}
-
-pkg_postrm_kernel () {
-        true
-}
-
diff --git a/packages/linux/linux-dht-walnut_2.6.12.bb b/packages/linux/linux-dht-walnut_2.6.12.bb
deleted file mode 100644
index 7d362ea659..0000000000
--- a/packages/linux/linux-dht-walnut_2.6.12.bb
+++ /dev/null
@@ -1,92 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for DHT-Walnut (ppc)  machine"
-LICENSE = "GPL"
-PR = "r0"
-DEPENDS = "u-boot"
-
-KERNEL_CCSUFFIX = "-3.4.4"
-
-SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
-           file://ppc_40x_uboot.patch;patch=1 \
-           file://iw_we18-5.diff;patch=1 \
-           file://linux-2.6.12-mppe-mppc-1.3.patch;patch=1 \
-           file://dht-walnut_defconfig"
-
-
-S = "${WORKDIR}/linux-${PV}"
-
-inherit kernel
-
-
-FILES_kernel-image = "/boot/zImage.elf"
-
-export OS = "Linux"
-ARCH = "ppc"
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_OUTPUT = "arch/ppc/boot/images/zImage.elf"
-
-
-
-
-do_configure_prepend() {
-	install -m 0644 ${WORKDIR}/dht-walnut_defconfig ${S}/.config
-#        oe_machinstall -m 0644 ${S}/arch/ppc/configs/dht-walnut_defconfig ${S}/.config || die "no default configuration for ${MACHINE} available."
-#        oe_runmake oldconfig
-}
-
-do_stage_append () {
-#need ppc platforms includes + friends in order for external kernel modules to compile
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms
-       install -m 0755  arch/ppc/platforms/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx
-       install -m 0755  arch/ppc/platforms/4xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx
-       install -m 0755  arch/ppc/platforms/83xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx
-
-       install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx
-       install -m 0755  arch/ppc/platforms/85xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx
-
-       install -d ${STAGING_KERNEL_DIR}/include/asm-m68k
-       install -m 0755  include/asm-m68k/*.h ${STAGING_KERNEL_DIR}/include/asm-m68k
-}
-
-do_install_append () {
-        install -d  ${DEPLOY_DIR}/images
-        install -m 0755 arch/ppc/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf
-        install -m 0755 vmlinux ${DEPLOY_DIR}/images/
-        powerpc-linux-uclibc-objcopy -O binary -R .note -R .comment -S ${DEPLOY_DIR}/images/vmlinux ${DEPLOY_DIR}/images/linux.bin
-        gzip -f -9 ${DEPLOY_DIR}/images/linux.bin
-        mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "owmnr-2.6.12-ppc" -d ${DEPLOY_DIR}/images/linux.bin.gz ${DEPLOY_DIR}/images/uImage-${PV}-${MACHINE}-${DATETIME}.bin
-        rm ${DEPLOY_DIR}/images/vmlinux
-        rm ${DEPLOY_DIR}/images/linux.bin.gz
-
-
-}
-
-pkg_postinst_kernel () {
-        true
-}
-
-pkg_postrm_kernel () {
-        true
-}
-
-
-
-
-#do_configure_prepend() {
-#	install -m 0644 ${WORKDIR}/dht-walnut_defconfig ${S}/.config
-#}
-
-
-#do_deploy() {
-#        install -d ${DEPLOY_DIR}/images
-#        install -m 0644 arch/${ARCH}/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin}
-
-#do_deploy[dirs] = "${S}"
-
-#addtask deploy before do_build after do_compile
-
diff --git a/packages/linux/linux-dht-walnut_2.6.20.bb b/packages/linux/linux-dht-walnut_2.6.20.bb
index c770c6aa79..bc876ebf34 100644
--- a/packages/linux/linux-dht-walnut_2.6.20.bb
+++ b/packages/linux/linux-dht-walnut_2.6.20.bb
@@ -1,10 +1,12 @@
+# Copyright (C) 2007, Stelios Koroneos - Digital OPSiS, All Rights Reserved
+# Released under the MIT license (see packages/COPYING)
 SECTION = "kernel"
 DESCRIPTION = "Linux kernel for DHT-Walnut (ppc)  machine"
 LICENSE = "GPL"
-PR = "r2"
+PR = "r3"
 DEPENDS = "u-boot"
 
-KERNEL_CCSUFFIX = "-3.4.4"
+COMPATIBLE_MACHINE = "dht-walnut"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
            file://dht-walnut_defconfig"
@@ -46,14 +48,17 @@ do_stage_append () {
 
 
 do_install_append () {
-        install -d  ${DEPLOY_DIR}/images
-        install -m 0755 arch/ppc/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf
-        install -m 0755 vmlinux ${DEPLOY_DIR}/images/
-        powerpc${TARGET_VENDOR}-${TARGET_OS}-objcopy -O binary -R .note -R .comment -S ${DEPLOY_DIR}/images/vmlinux ${DEPLOY_DIR}/images/linux.bin
-        gzip -f -9 ${DEPLOY_DIR}/images/linux.bin
-        mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "ppc405"+${PV} -d ${DEPLOY_DIR}/images/linux.bin.gz ${DEPLOY_DIR}/images/uImage-${PV}-${MACHINE}-${DATETIME}.bin        
-        rm ${DEPLOY_DIR}/images/vmlinux
-        rm ${DEPLOY_DIR}/images/linux.bin.gz
+        install -d  ${DEPLOY_DIR_IMAGE}
+        install -m 0755 arch/ppc/boot/images/zImage.elf \ 
+                ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf
+        install -m 0755 vmlinux ${DEPLOY_DIR_IMAGE}/
+        powerpc${TARGET_VENDOR}-${TARGET_OS}-objcopy -O binary -R .note -R .comment -S \ 
+               ${DEPLOY_DIR_IMAGE}/vmlinux ${DEPLOY_DIR_IMAGE}/linux.bin
+        gzip -f -9 ${DEPLOY_DIR_IMAGE}/linux.bin
+        mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "ppc405"+${PV} -d ${DEPLOY_DIR_IMAGE}/linux.bin.gz \ 
+                ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${MACHINE}-${DATETIME}.bin        
+        rm ${DEPLOY_DIR_IMAGE}/vmlinux
+        rm ${DEPLOY_DIR_IMAGE}/linux.bin.gz
 
 
 }
diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/.mtn2git_empty b/packages/linux/linux-sequoia-2.6.21/.mtn2git_empty
index e69de29bb2..e69de29bb2 100644
--- a/packages/linux/linux-dht-walnut-2.6.12.6/.mtn2git_empty
+++ b/packages/linux/linux-sequoia-2.6.21/.mtn2git_empty
diff --git a/packages/linux/linux-sequoia_2.6.21.bb b/packages/linux/linux-sequoia_2.6.21.bb
new file mode 100644
index 0000000000..1fa520e914
--- /dev/null
+++ b/packages/linux/linux-sequoia_2.6.21.bb
@@ -0,0 +1,60 @@
+# Copyright (C) 2007, Stelios Koroneos - Digital OPSiS, All Rights Reserved
+# Released under the MIT license (see packages/COPYING)
+SECTION = "kernel"
+DESCRIPTION = "Linux kernel for AMCC's Sequoia dev board"
+LICENSE = "GPL"
+PR = "r0"
+#DEPENDS = "u-boot"
+
+COMPATIBLE_MACHINE = "sequoia"
+
+#DENX git kernel
+#Same as in AMCC's sequoia dev kit
+SRC_URI ="git://www.denx.de/git/linux-2.6-denx.git;protocol=git;tag=78157a82fa20719f7e3307307755888e9af2c0e9 \
+          file://sequoia_defconfig "
+
+
+S = "${WORKDIR}/git"
+
+inherit kernel
+
+export ARCH="ppc"
+
+KERNEL_IMAGETYPE = "zImage.elf"
+
+do_configure() {
+                install -m 644 ${WORKDIR}/sequoia_defconfig ${S}/.config
+                make ARCH=${ARCH} oldconfig
+}
+
+do_stage_append () {
+#need ppc platforms includes + friends in order for external kernel modules to compile as headers a$
+
+       install -d ${STAGING_KERNEL_DIR}/arch/
+       cp -a arch/ppc ${STAGING_KERNEL_DIR}/arch/
+       cp -a arch/powerpc ${STAGING_KERNEL_DIR}/arch/
+
+       install -d ${STAGING_KERNEL_DIR}/include/asm
+       cp -a include/asm-powerpc ${STAGING_KERNEL_DIR}/include/
+       cp -a include/asm-ppc ${STAGING_KERNEL_DIR}/include/
+}
+
+
+
+do_deploy() {
+        install -d ${DEPLOY_DIR_IMAGE}
+        install -m 0644 arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE} \
+                 ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}
+}
+
+#seems like 2.6.21 kernel images have moved (or is this only for the Denx kernel ?)
+#so we need to copy the kernel image where kernel.bbclass expects it to be
+do_install_prepend() {
+        install -m 0644 arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE} \
+                        arch/${ARCH}/boot/${KERNEL_IMAGETYPE}
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask deploy before do_build after do_compile
+
diff --git a/packages/linux/linux-x86-2.6.20/defconfig b/packages/linux/linux-x86-2.6.20/i486-defconfig
index ed299d667d..2b7dc6a3f7 100644
--- a/packages/linux/linux-x86-2.6.20/defconfig
+++ b/packages/linux/linux-x86-2.6.20/i486-defconfig
@@ -702,7 +702,7 @@ CONFIG_S2IO=m
 #
 # Wireless LAN (non-hamradio)
 #
-CONFIG_NET_RADIO=y
+# CONFIG_NET_RADIO is not set
 
 #
 # Wan interfaces
diff --git a/packages/linux/linux-x86-2.6.20/i586-defconfig b/packages/linux/linux-x86-2.6.20/i586-defconfig
new file mode 100644
index 0000000000..b06f535e7b
--- /dev/null
+++ b/packages/linux/linux-x86-2.6.20/i586-defconfig
@@ -0,0 +1,2705 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Sat May 26 01:56:02 2007
+#
+CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor type and features
+#
+CONFIG_SMP=y
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+CONFIG_M586=y
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_HPET_TIMER=y
+CONFIG_NR_CPUS=8
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+# CONFIG_X86_MCE_P4THERMAL is not set
+CONFIG_VM86=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_HIGHPTE is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MTRR=y
+# CONFIG_EFI is not set
+CONFIG_IRQBALANCE=y
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_COMPAT_VDSO=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_HOTKEY is not set
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_IBM=m
+# CONFIG_ACPI_IBM_DOCK is not set
+# CONFIG_ACPI_TOSHIBA is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+# CONFIG_APM_CPU_IDLE is not set
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_RTC_IS_GMT is not set
+# CONFIG_APM_ALLOW_INTS is not set
+# CONFIG_APM_REAL_MODE_POWER_OFF is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+CONFIG_PCIEAER=y
+# CONFIG_PCI_MSI is not set
+CONFIG_HT_IRQ=y
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_K8_NB=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=y
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=m
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+# CONFIG_MTD_ESB2ROM is not set
+# CONFIG_MTD_CK804XROM is not set
+# CONFIG_MTD_SCB2_FLASH is not set
+# CONFIG_MTD_L440GX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+CONFIG_MTD_NAND_CAFE=y
+CONFIG_MTD_NAND_CS553X=y
+
+#
+# OneNAND Flash Device Drivers
+#
+CONFIG_MTD_ONENAND=m
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+# CONFIG_PARPORT_1284 is not set
+CONFIG_PARPORT_NOT_PC=y
+
+#
+# Plug and Play support
+#
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=y
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+# CONFIG_PARIDE_EPATC8 is not set
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+# CONFIG_CISS_SCSI_TAPE is not set
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+# CONFIG_SGI_IOC4 is not set
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+# CONFIG_MSI_LAPTOP is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_CMD640=y
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_RZ1000=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=y
+CONFIG_BLK_DEV_ALI15X3=y
+# CONFIG_WDC_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+CONFIG_BLK_DEV_ATIIXP=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_TRIFLEX=y
+CONFIG_BLK_DEV_CY82C693=y
+CONFIG_BLK_DEV_CS5520=y
+CONFIG_BLK_DEV_CS5530=y
+CONFIG_BLK_DEV_CS5535=y
+CONFIG_BLK_DEV_HPT34X=y
+# CONFIG_HPT34X_AUTODMA is not set
+CONFIG_BLK_DEV_HPT366=y
+CONFIG_BLK_DEV_JMICRON=y
+CONFIG_BLK_DEV_SC1200=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_BLK_DEV_IT821X=y
+CONFIG_BLK_DEV_NS87415=y
+CONFIG_BLK_DEV_PDC202XX_OLD=y
+# CONFIG_PDC202XX_BURST is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+CONFIG_BLK_DEV_SVWKS=y
+CONFIG_BLK_DEV_SIIMAGE=y
+CONFIG_BLK_DEV_SIS5513=y
+CONFIG_BLK_DEV_SLC90E66=y
+CONFIG_BLK_DEV_TRM290=y
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_RESET_DELAY_MS=5000
+# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
+CONFIG_AIC79XX_DEBUG_ENABLE=y
+CONFIG_AIC79XX_DEBUG_MASK=0
+CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC94XX=m
+CONFIG_AIC94XX_DEBUG=y
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+# CONFIG_MEGARAID_NEWGEN is not set
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+# CONFIG_SCSI_OMIT_FLASHPOINT is not set
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_SRP=m
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SVW=y
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SX4=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+CONFIG_SATA_INTEL_COMBINED=y
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_OPTIDMA=y
+# CONFIG_PATA_PCMCIA is not set
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+CONFIG_IEEE1394_PCILYNX=m
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=y
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_NET_SB1000=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_FIXED_PHY=m
+# CONFIG_FIXED_MII_10_FDX is not set
+# CONFIG_FIXED_MII_100_FDX is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
+CONFIG_AMD8111_ETH=m
+# CONFIG_AMD8111E_NAPI is not set
+CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
+CONFIG_B44=m
+CONFIG_FORCEDETH=m
+# CONFIG_FORCEDETH_NAPI is not set
+CONFIG_DGRS=m
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
+CONFIG_NET_POCKET=y
+CONFIG_ATP=m
+CONFIG_DE600=m
+CONFIG_DE620=m
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+# CONFIG_R8169_NAPI is not set
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+CONFIG_SKY2=m
+CONFIG_SK98LIN=m
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_QLA3XXX=m
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+CONFIG_S2IO=m
+# CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_IPW2100=m
+# CONFIG_IPW2100_MONITOR is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_IPW2200_MONITOR is not set
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_AIRO=m
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+# CONFIG_HOSTAP_CS is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+CONFIG_ISDN=m
+
+#
+# Old ISDN4Linux
+#
+# CONFIG_ISDN_I4L is not set
+
+#
+# CAPI subsystem
+#
+CONFIG_ISDN_CAPI=m
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
+CONFIG_ISDN_CAPI_CAPI20=m
+
+#
+# CAPI hardware drivers
+#
+
+#
+# Active AVM cards
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+
+#
+# Active Eicon DIVA Server cards
+#
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+# CONFIG_ISDN_DIVAS_BRIPCI is not set
+# CONFIG_ISDN_DIVAS_PRIPCI is not set
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+# CONFIG_NVRAM is not set
+CONFIG_RTC=m
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+CONFIG_AGP=y
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I830=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+CONFIG_MWAVE=m
+# CONFIG_SCx200_GPIO is not set
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_CS5535_GPIO=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+CONFIG_HANGCHECK_TIMER=m
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_TELCLOCK=m
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_I810=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_ISA=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_PROSAVAGE=m
+CONFIG_I2C_SAVAGE4=m
+CONFIG_SCx200_ACB=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_STUB=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+CONFIG_I2C_VOODOO3=m
+CONFIG_I2C_PCA_ISA=m
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_BUTTERFLY=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_FSCHER=m
+CONFIG_SENSORS_FSCPOS=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM70=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+# CONFIG_VIDEO_BT848_DVB is not set
+CONFIG_VIDEO_SAA6588=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+# CONFIG_VIDEO_SAA7134_OSS is not set
+# CONFIG_VIDEO_SAA7134_DVB is not set
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+# CONFIG_VIDEO_CX88_DVB is not set
+CONFIG_VIDEO_CAFE_CCIC=m
+
+#
+# V4L USB devices
+#
+CONFIG_VIDEO_PVRUSB2=m
+# CONFIG_VIDEO_PVRUSB2_29XXX is not set
+# CONFIG_VIDEO_PVRUSB2_24XXX is not set
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+
+#
+# Radio Adapters
+#
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+CONFIG_USB_DSBR=m
+
+#
+# Digital Video Broadcasting Devices
+#
+CONFIG_DVB=y
+CONFIG_DVB_CORE=m
+# CONFIG_DVB_CORE_ATTACH is not set
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+# CONFIG_DVB_CINERGYT2_TUNING is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_TDA10086=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+
+#
+# Tuners/PLL support
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUNER_MT2060=m
+CONFIG_DVB_TUNER_LGH06XF=m
+
+#
+# Miscellaneous devices
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_TUA6100=m
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_DDC=m
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=y
+CONFIG_FB_VESA=y
+CONFIG_FB_HGA=m
+# CONFIG_FB_HGA_ACCEL is not set
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+# CONFIG_FB_NVIDIA_I2C is not set
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_I810=m
+# CONFIG_FB_I810_GTF is not set
+CONFIG_FB_INTEL=m
+# CONFIG_FB_INTEL_DEBUG is not set
+CONFIG_FB_INTEL_I2C=y
+CONFIG_FB_MATROX=m
+# CONFIG_FB_MATROX_MILLENIUM is not set
+# CONFIG_FB_MATROX_MYSTIQUE is not set
+# CONFIG_FB_MATROX_G is not set
+CONFIG_FB_MATROX_I2C=m
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY=m
+# CONFIG_FB_ATY_CT is not set
+# CONFIG_FB_ATY_GX is not set
+CONFIG_FB_SAVAGE=m
+# CONFIG_FB_SAVAGE_I2C is not set
+# CONFIG_FB_SAVAGE_ACCEL is not set
+CONFIG_FB_SIS=m
+# CONFIG_FB_SIS_300 is not set
+# CONFIG_FB_SIS_315 is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_CYBLA=m
+CONFIG_FB_TRIDENT=m
+# CONFIG_FB_TRIDENT_ACCEL is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_GX=m
+# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_VIRTUAL=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_VIDEO_SELECT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_RTCTIMER=m
+CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+
+#
+# PCI devices
+#
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X_BOOL is not set
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=y
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+CONFIG_SOUND_BT878=m
+CONFIG_SOUND_ES1371=m
+CONFIG_SOUND_ICH=m
+CONFIG_SOUND_TRIDENT=m
+CONFIG_SOUND_MSNDCLAS=m
+CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
+CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
+CONFIG_SOUND_MSNDPIN=m
+CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
+CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
+CONFIG_SOUND_VIA82CXXX=m
+# CONFIG_MIDI_VIA82CXXX is not set
+CONFIG_SOUND_OSS=m
+# CONFIG_SOUND_TRACEINIT is not set
+# CONFIG_SOUND_DMAP is not set
+CONFIG_SOUND_CS4232=m
+CONFIG_SOUND_SSCAPE=m
+CONFIG_SOUND_VMIDI=m
+CONFIG_SOUND_TRIX=m
+CONFIG_SOUND_MSS=m
+CONFIG_SOUND_MPU401=m
+CONFIG_SOUND_PAS=m
+CONFIG_SOUND_PSS=m
+# CONFIG_PSS_MIXER is not set
+CONFIG_SOUND_SB=m
+CONFIG_SOUND_YM3812=m
+CONFIG_SOUND_UART6850=m
+CONFIG_SOUND_AEDSP16=m
+# CONFIG_SC6600 is not set
+# CONFIG_AEDSP16_MSS is not set
+# CONFIG_AEDSP16_SBPRO is not set
+# CONFIG_AEDSP16_MPU401 is not set
+CONFIG_SOUND_TVMIXER=m
+CONFIG_SOUND_KAHLUA=m
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_CS is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+CONFIG_USB_ACECAD=m
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_TOUCHSCREEN=m
+CONFIG_USB_TOUCHSCREEN_EGALAX=y
+CONFIG_USB_TOUCHSCREEN_PANJIT=y
+CONFIG_USB_TOUCHSCREEN_3M=y
+CONFIG_USB_TOUCHSCREEN_ITM=y
+CONFIG_USB_TOUCHSCREEN_ETURBO=y
+CONFIG_USB_TOUCHSCREEN_GUNZE=y
+CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
+CONFIG_USB_YEALINK=m
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+CONFIG_USB_ATI_REMOTE2=m
+CONFIG_USB_KEYSPAN_REMOTE=m
+CONFIG_USB_APPLETOUCH=m
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_TEST=m
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+CONFIG_EDAC=m
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_AMD76X=m
+CONFIG_EDAC_E7XXX=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82875P=m
+CONFIG_EDAC_I82860=m
+CONFIG_EDAC_R82600=m
+CONFIG_EDAC_POLL=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_TEST=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=m
+
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+CONFIG_AFS_FS=m
+CONFIG_RXRPC=m
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_TWOFISH_586=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+CONFIG_KTIME_SCALAR=y
diff --git a/packages/linux/linux-x86-2.6.20/i686-defconfig b/packages/linux/linux-x86-2.6.20/i686-defconfig
new file mode 100644
index 0000000000..b06f535e7b
--- /dev/null
+++ b/packages/linux/linux-x86-2.6.20/i686-defconfig
@@ -0,0 +1,2705 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Sat May 26 01:56:02 2007
+#
+CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor type and features
+#
+CONFIG_SMP=y
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+CONFIG_M586=y
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_HPET_TIMER=y
+CONFIG_NR_CPUS=8
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+# CONFIG_X86_MCE_P4THERMAL is not set
+CONFIG_VM86=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_HIGHPTE is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MTRR=y
+# CONFIG_EFI is not set
+CONFIG_IRQBALANCE=y
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_COMPAT_VDSO=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_HOTKEY is not set
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_IBM=m
+# CONFIG_ACPI_IBM_DOCK is not set
+# CONFIG_ACPI_TOSHIBA is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+# CONFIG_APM_CPU_IDLE is not set
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_RTC_IS_GMT is not set
+# CONFIG_APM_ALLOW_INTS is not set
+# CONFIG_APM_REAL_MODE_POWER_OFF is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+CONFIG_PCIEAER=y
+# CONFIG_PCI_MSI is not set
+CONFIG_HT_IRQ=y
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISA is not set
+# CONFIG_MCA is not set
+CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_K8_NB=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=y
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=m
+CONFIG_NFTL=m
+# CONFIG_NFTL_RW is not set
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+# CONFIG_MTD_ESB2ROM is not set
+# CONFIG_MTD_CK804XROM is not set
+# CONFIG_MTD_SCB2_FLASH is not set
+# CONFIG_MTD_L440GX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+CONFIG_MTD_NAND_CAFE=y
+CONFIG_MTD_NAND_CS553X=y
+
+#
+# OneNAND Flash Device Drivers
+#
+CONFIG_MTD_ONENAND=m
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
+# CONFIG_PARPORT_1284 is not set
+CONFIG_PARPORT_NOT_PC=y
+
+#
+# Plug and Play support
+#
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=y
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+# CONFIG_PARIDE_EPATC8 is not set
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+# CONFIG_CISS_SCSI_TAPE is not set
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+# CONFIG_SGI_IOC4 is not set
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+# CONFIG_MSI_LAPTOP is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_CMD640=y
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_RZ1000=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=y
+CONFIG_BLK_DEV_ALI15X3=y
+# CONFIG_WDC_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+CONFIG_BLK_DEV_ATIIXP=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_TRIFLEX=y
+CONFIG_BLK_DEV_CY82C693=y
+CONFIG_BLK_DEV_CS5520=y
+CONFIG_BLK_DEV_CS5530=y
+CONFIG_BLK_DEV_CS5535=y
+CONFIG_BLK_DEV_HPT34X=y
+# CONFIG_HPT34X_AUTODMA is not set
+CONFIG_BLK_DEV_HPT366=y
+CONFIG_BLK_DEV_JMICRON=y
+CONFIG_BLK_DEV_SC1200=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_BLK_DEV_IT821X=y
+CONFIG_BLK_DEV_NS87415=y
+CONFIG_BLK_DEV_PDC202XX_OLD=y
+# CONFIG_PDC202XX_BURST is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+CONFIG_BLK_DEV_SVWKS=y
+CONFIG_BLK_DEV_SIIMAGE=y
+CONFIG_BLK_DEV_SIS5513=y
+CONFIG_BLK_DEV_SLC90E66=y
+CONFIG_BLK_DEV_TRM290=y
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_RESET_DELAY_MS=5000
+# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
+CONFIG_AIC79XX_DEBUG_ENABLE=y
+CONFIG_AIC79XX_DEBUG_MASK=0
+CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC94XX=m
+CONFIG_AIC94XX_DEBUG=y
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+# CONFIG_MEGARAID_NEWGEN is not set
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+# CONFIG_SCSI_OMIT_FLASHPOINT is not set
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA=m
+# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
+# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
+CONFIG_SCSI_EATA_MAX_TAGS=16
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_SRP=m
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SVW=y
+CONFIG_ATA_PIIX=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_NV=y
+CONFIG_PDC_ADMA=y
+CONFIG_SATA_QSTOR=y
+CONFIG_SATA_PROMISE=y
+CONFIG_SATA_SX4=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_ULI=y
+CONFIG_SATA_VIA=y
+CONFIG_SATA_VITESSE=y
+CONFIG_SATA_INTEL_COMBINED=y
+CONFIG_PATA_ALI=y
+CONFIG_PATA_AMD=y
+CONFIG_PATA_ARTOP=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_PATA_EFAR=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_HPT3X3=y
+CONFIG_PATA_IT821X=y
+CONFIG_PATA_JMICRON=y
+CONFIG_PATA_TRIFLEX=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_NETCELL=y
+CONFIG_PATA_NS87410=y
+CONFIG_PATA_OPTI=y
+CONFIG_PATA_OPTIDMA=y
+# CONFIG_PATA_PCMCIA is not set
+CONFIG_PATA_PDC_OLD=y
+CONFIG_PATA_RADISYS=y
+CONFIG_PATA_RZ1000=y
+CONFIG_PATA_SC1200=y
+CONFIG_PATA_SERVERWORKS=y
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_SIS=y
+CONFIG_PATA_VIA=y
+CONFIG_PATA_WINBOND=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+CONFIG_IEEE1394_PCILYNX=m
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=y
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_NET_SB1000=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_FIXED_PHY=m
+# CONFIG_FIXED_MII_10_FDX is not set
+# CONFIG_FIXED_MII_100_FDX is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
+CONFIG_AMD8111_ETH=m
+# CONFIG_AMD8111E_NAPI is not set
+CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
+CONFIG_B44=m
+CONFIG_FORCEDETH=m
+# CONFIG_FORCEDETH_NAPI is not set
+CONFIG_DGRS=m
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
+CONFIG_NET_POCKET=y
+CONFIG_ATP=m
+CONFIG_DE600=m
+CONFIG_DE620=m
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+# CONFIG_R8169_NAPI is not set
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+CONFIG_SKY2=m
+CONFIG_SK98LIN=m
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_QLA3XXX=m
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+CONFIG_S2IO=m
+# CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_IPW2100=m
+# CONFIG_IPW2100_MONITOR is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_IPW2200_MONITOR is not set
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_AIRO=m
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+# CONFIG_HOSTAP_CS is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+CONFIG_ISDN=m
+
+#
+# Old ISDN4Linux
+#
+# CONFIG_ISDN_I4L is not set
+
+#
+# CAPI subsystem
+#
+CONFIG_ISDN_CAPI=m
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
+CONFIG_ISDN_CAPI_CAPI20=m
+
+#
+# CAPI hardware drivers
+#
+
+#
+# Active AVM cards
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+
+#
+# Active Eicon DIVA Server cards
+#
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+# CONFIG_ISDN_DIVAS_BRIPCI is not set
+# CONFIG_ISDN_DIVAS_PRIPCI is not set
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
+# CONFIG_NVRAM is not set
+CONFIG_RTC=m
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+CONFIG_AGP=y
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I830=m
+CONFIG_DRM_I915=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+CONFIG_MWAVE=m
+# CONFIG_SCx200_GPIO is not set
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_CS5535_GPIO=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+CONFIG_HANGCHECK_TIMER=m
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_TELCLOCK=m
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_I810=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_ISA=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_PROSAVAGE=m
+CONFIG_I2C_SAVAGE4=m
+CONFIG_SCx200_ACB=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_STUB=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+CONFIG_I2C_VOODOO3=m
+CONFIG_I2C_PCA_ISA=m
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_BUTTERFLY=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_FSCHER=m
+CONFIG_SENSORS_FSCPOS=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM70=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+# CONFIG_VIDEO_BT848_DVB is not set
+CONFIG_VIDEO_SAA6588=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+# CONFIG_VIDEO_SAA7134_OSS is not set
+# CONFIG_VIDEO_SAA7134_DVB is not set
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+# CONFIG_VIDEO_CX88_DVB is not set
+CONFIG_VIDEO_CAFE_CCIC=m
+
+#
+# V4L USB devices
+#
+CONFIG_VIDEO_PVRUSB2=m
+# CONFIG_VIDEO_PVRUSB2_29XXX is not set
+# CONFIG_VIDEO_PVRUSB2_24XXX is not set
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+
+#
+# Radio Adapters
+#
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+CONFIG_USB_DSBR=m
+
+#
+# Digital Video Broadcasting Devices
+#
+CONFIG_DVB=y
+CONFIG_DVB_CORE=m
+# CONFIG_DVB_CORE_ATTACH is not set
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+# CONFIG_DVB_CINERGYT2_TUNING is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+CONFIG_DVB_FE_CUSTOMISE=y
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_TDA10086=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+
+#
+# Tuners/PLL support
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUNER_MT2060=m
+CONFIG_DVB_TUNER_LGH06XF=m
+
+#
+# Miscellaneous devices
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_TUA6100=m
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_DDC=m
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=y
+CONFIG_FB_VESA=y
+CONFIG_FB_HGA=m
+# CONFIG_FB_HGA_ACCEL is not set
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+# CONFIG_FB_NVIDIA_I2C is not set
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_I810=m
+# CONFIG_FB_I810_GTF is not set
+CONFIG_FB_INTEL=m
+# CONFIG_FB_INTEL_DEBUG is not set
+CONFIG_FB_INTEL_I2C=y
+CONFIG_FB_MATROX=m
+# CONFIG_FB_MATROX_MILLENIUM is not set
+# CONFIG_FB_MATROX_MYSTIQUE is not set
+# CONFIG_FB_MATROX_G is not set
+CONFIG_FB_MATROX_I2C=m
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY=m
+# CONFIG_FB_ATY_CT is not set
+# CONFIG_FB_ATY_GX is not set
+CONFIG_FB_SAVAGE=m
+# CONFIG_FB_SAVAGE_I2C is not set
+# CONFIG_FB_SAVAGE_ACCEL is not set
+CONFIG_FB_SIS=m
+# CONFIG_FB_SIS_300 is not set
+# CONFIG_FB_SIS_315 is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_VOODOO1=m
+CONFIG_FB_CYBLA=m
+CONFIG_FB_TRIDENT=m
+# CONFIG_FB_TRIDENT_ACCEL is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_GX=m
+# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set
+CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_VIRTUAL=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_VIDEO_SELECT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_RTCTIMER=m
+CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+
+#
+# PCI devices
+#
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X_BOOL is not set
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=y
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+CONFIG_SOUND_BT878=m
+CONFIG_SOUND_ES1371=m
+CONFIG_SOUND_ICH=m
+CONFIG_SOUND_TRIDENT=m
+CONFIG_SOUND_MSNDCLAS=m
+CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
+CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
+CONFIG_SOUND_MSNDPIN=m
+CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
+CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
+CONFIG_SOUND_VIA82CXXX=m
+# CONFIG_MIDI_VIA82CXXX is not set
+CONFIG_SOUND_OSS=m
+# CONFIG_SOUND_TRACEINIT is not set
+# CONFIG_SOUND_DMAP is not set
+CONFIG_SOUND_CS4232=m
+CONFIG_SOUND_SSCAPE=m
+CONFIG_SOUND_VMIDI=m
+CONFIG_SOUND_TRIX=m
+CONFIG_SOUND_MSS=m
+CONFIG_SOUND_MPU401=m
+CONFIG_SOUND_PAS=m
+CONFIG_SOUND_PSS=m
+# CONFIG_PSS_MIXER is not set
+CONFIG_SOUND_SB=m
+CONFIG_SOUND_YM3812=m
+CONFIG_SOUND_UART6850=m
+CONFIG_SOUND_AEDSP16=m
+# CONFIG_SC6600 is not set
+# CONFIG_AEDSP16_MSS is not set
+# CONFIG_AEDSP16_SBPRO is not set
+# CONFIG_AEDSP16_MPU401 is not set
+CONFIG_SOUND_TVMIXER=m
+CONFIG_SOUND_KAHLUA=m
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_ISP116X_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_SL811_CS is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+CONFIG_USB_ACECAD=m
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_TOUCHSCREEN=m
+CONFIG_USB_TOUCHSCREEN_EGALAX=y
+CONFIG_USB_TOUCHSCREEN_PANJIT=y
+CONFIG_USB_TOUCHSCREEN_3M=y
+CONFIG_USB_TOUCHSCREEN_ITM=y
+CONFIG_USB_TOUCHSCREEN_ETURBO=y
+CONFIG_USB_TOUCHSCREEN_GUNZE=y
+CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
+CONFIG_USB_YEALINK=m
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+CONFIG_USB_ATI_REMOTE2=m
+CONFIG_USB_KEYSPAN_REMOTE=m
+CONFIG_USB_APPLETOUCH=m
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_TEST=m
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+CONFIG_EDAC=m
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_AMD76X=m
+CONFIG_EDAC_E7XXX=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82875P=m
+CONFIG_EDAC_I82860=m
+CONFIG_EDAC_R82600=m
+CONFIG_EDAC_POLL=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_TEST=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=m
+
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+CONFIG_AFS_FS=m
+CONFIG_RXRPC=m
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_TWOFISH_586=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+CONFIG_KTIME_SCALAR=y
diff --git a/packages/linux/linux-x86_2.6.20.bb b/packages/linux/linux-x86_2.6.20.bb
index c73ee58d2f..ef5a451af0 100644
--- a/packages/linux/linux-x86_2.6.20.bb
+++ b/packages/linux/linux-x86_2.6.20.bb
@@ -1,10 +1,14 @@
 DESCRIPTION = "Linux Kernel for x86 compatible machines"
 SECTION = "kernel"
 LICENSE = "GPL"
-PR = "r2"
+PR = "r0"
+
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 " 
+
+SRC_URI_append_x86 = "file://i486-defconfig"
+SRC_URI_append_i586-generic = "file://i586-defconfig"
+SRC_URI_append_i686-generic = "file://i686-defconfig"
 
-SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
-           file://defconfig"
 
 S = "${WORKDIR}/linux-${PV}"
 
@@ -13,15 +17,15 @@ inherit kernel
 COMPATIBLE_HOST = "i.86.*-linux"
 KERNEL_IMAGETYPE = "bzImage"
 
-do_configure_prepend() {
-	install -m 0644 ${WORKDIR}/defconfig ${S}/.config
+do_configure_prepend_x86() {
+	install -m 0644 ${WORKDIR}/i486-defconfig ${S}/.config
 }
 
-do_deploy() {
-        install -d ${DEPLOY_DIR_IMAGE}
-        install -m 0644 arch/i386/boot/${KERNEL_IMAGETYPE}  ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} 
-}   
+do_configure_prepend_i586-generic() {
+	install -m 0644 ${WORKDIR}/i586-defconfig ${S}/.config
+}
 
-do_deploy[dirs] = "${S}"
+do_configure_prepend_i686() {
+	install -m 0644 ${WORKDIR}/i686-defconfig ${S}/.config
+}
 
-addtask deploy before do_populate_staging after do_compile