gumstix-verdex,connex : Copy machine and kernel updates direct from gumstix.com

                        OE based build system.

9 files changed, 540 insertions, 604 deletions

diff --git a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig
index 418a1b4402..cfc7babcef 100644
--- a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig
+++ b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig
@@ -1031,14 +1031,15 @@ CONFIG_I2C_PXA=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSC2003 is not set
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSC2003=m
+CONFIG_SENSORS_TSC2003_SYSFS=m
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -1157,8 +1158,8 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
 # CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-CONFIG_FONT_7x14=y
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
diff --git a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig-nofb b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig-nofb
index 22e0ef0413..3840a395df 100644
--- a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig-nofb
+++ b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-connex/defconfig-nofb
@@ -1031,14 +1031,15 @@ CONFIG_I2C_PXA=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSC2003 is not set
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSC2003=m
+CONFIG_SENSORS_TSC2003_SYSFS=m
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
diff --git a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig
index 5a8728d26a..70a733a15c 100644
--- a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig
+++ b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig
@@ -1058,13 +1058,13 @@ CONFIG_I2C_PXA=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
 CONFIG_SENSORS_TSC2003=m
 CONFIG_SENSORS_TSC2003_SYSFS=m
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1187,8 +1187,8 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
 # CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-CONFIG_FONT_7x14=y
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
@@ -1244,7 +1244,7 @@ CONFIG_SND_PXA2XX_AC97=m
 #
 # USB devices
 #
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB_AUDIO=m
 
 #
 # PCMCIA devices
@@ -1426,7 +1426,7 @@ CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
diff --git a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig-nofb b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig-nofb
index 0634a90a94..144b3c6e3a 100644
--- a/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig-nofb
+++ b/packages/linux/gumstix-kernel-2.6.21/gumstix-custom-verdex/defconfig-nofb
@@ -1058,13 +1058,13 @@ CONFIG_I2C_PXA=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
 CONFIG_SENSORS_TSC2003=m
 CONFIG_SENSORS_TSC2003_SYSFS=m
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1244,7 +1244,7 @@ CONFIG_SND_PXA2XX_AC97=m
 #
 # USB devices
 #
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB_AUDIO=m
 
 #
 # PCMCIA devices
@@ -1426,7 +1426,7 @@ CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
diff --git a/packages/linux/gumstix-kernel-2.6.21/one-wire.patch b/packages/linux/gumstix-kernel-2.6.21/one-wire.patch
new file mode 100644
index 0000000000..b4994c3e61
--- /dev/null
+++ b/packages/linux/gumstix-kernel-2.6.21/one-wire.patch
@@ -0,0 +1,35 @@
+--- linux-2.6.21/drivers/w1/w1.c
++++ linux-2.6.21/drivers/w1/w1.c
+@@ -675,7 +675,6 @@ static void w1_slave_found(void *data, u64 rn)
+ 	struct w1_slave *sl;
+ 	struct list_head *ent;
+ 	struct w1_reg_num *tmp;
+-	int family_found = 0;
+ 	struct w1_master *dev;
+ 	u64 rn_le = cpu_to_le64(rn);
+ 
+@@ -698,9 +697,6 @@ static void w1_slave_found(void *data, u64 rn)
+ 		    sl->reg_num.crc == tmp->crc) {
+ 			set_bit(W1_SLAVE_ACTIVE, (long *)&sl->flags);
+ 			break;
+-		} else if (sl->reg_num.family == tmp->family) {
+-			family_found = 1;
+-			break;
+ 		}
+ 
+ 		slave_count++;
+@@ -874,11 +874,9 @@ void w1_search_process(struct w1_master *dev, u8 search_type)
+	w1_search_devices(dev, search_type, w1_slave_found);
+
+	list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
+-		if (!test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags) && !--sl->ttl) {
++		if (!test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags) && !--sl->ttl)
+			w1_slave_detach(sl);
+-
+-			dev->slave_count--;
+-		} else if (test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags))
++		else if (test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags))
+			sl->ttl = dev->slave_ttl;
+	}
+
+
diff --git a/packages/linux/gumstix-kernel-2.6.21/pxafb-backto16.patch b/packages/linux/gumstix-kernel-2.6.21/pxafb-backto16.patch
new file mode 100644
index 0000000000..a8b91daf37
--- /dev/null
+++ b/packages/linux/gumstix-kernel-2.6.21/pxafb-backto16.patch
@@ -0,0 +1,40 @@
+--- linux-2.6.21/arch/arm/mach-pxa/gumstix.c-orig	2008-02-20 16:18:57.000000000 -0800
++++ linux-2.6.21/arch/arm/mach-pxa/gumstix.c	2008-02-20 16:21:21.000000000 -0800
+@@ -146,8 +146,7 @@
+ 	.pixclock	= 110000,
+ 	.xres		= 480,
+ 	.yres		= 272,
+-	.bpp		= 18,
+-	.nonstd		= 24,
++	.bpp		= 16,
+ 	.hsync_len	= 41,
+ 	.left_margin	= 2,
+ 	.right_margin	= 2,
+@@ -161,7 +160,7 @@
+ 	.modes			= &gumstix_fb_mode,
+ 	.num_modes		= 1,
+ 	.lccr0			= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
+-	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (3 << 30),
++	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
+ 	.pxafb_backlight_power	= &gumstix_lcd_backlight,
+ };
+ #elif defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
+@@ -175,8 +174,7 @@
+ 	.vsync_len	= 10, // VLW from datasheet: 10 typ
+ 	.upper_margin	= 2, // VBP - VLW from datasheet: 12 - 10 = 2
+ 	.lower_margin	= 4, // VFP from datasheet: 4 typ
+-	.bpp		= 18,
+-	.nonstd		= 24,
++	.bpp		= 16,
+ 	.sync		= 0, // Hsync and Vsync both active low
+ };
+ 
+@@ -184,7 +182,7 @@
+ 	.modes			= &gumstix_fb_mode,
+ 	.num_modes		= 1,
+ 	.lccr0			= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
+-	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (3 << 30),
++	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
+ 	.pxafb_backlight_power	= &gumstix_lcd_backlight,
+ };
+ #endif
diff --git a/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch b/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch
new file mode 100644
index 0000000000..0d4425412c
--- /dev/null
+++ b/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch
@@ -0,0 +1,58 @@
+--- linux-2.6.21/drivers/net/gumstix-smc91x.c-orig	2008-02-24 22:06:30.000000000 -0800
++++ linux-2.6.21/drivers/net/gumstix-smc91x.c	2008-02-25 08:12:57.000000000 -0800
+@@ -90,18 +90,42 @@
+ 	pxa_gpio_mode(GPIO49_nPWE_MD);
+ 
+ 	pxa_gpio_mode(GPIO78_nCS_2_MD);
+-	// If either if statement fails, then we'll drop out and turn_off_eth1,
++
++  // First look for smc91x0
++	// If either if statement fails, then we'll drop out and turn_off_eth0,
++	// if both succeed, then we'll skip that and just proceed
++  // to test for 2 smc91x chips
++	if(request_mem_region(gumstix_smc91x0_resources[0].start, SMC_IO_EXTENT, "smc91x0 probe"))
++	{
++		ioaddr = ioremap(gumstix_smc91x0_resources[0].start, SMC_IO_EXTENT);
++		val = ioread16(ioaddr + BANK_SELECT);
++		iounmap(ioaddr);
++		release_mem_region(gumstix_smc91x0_resources[0].start, SMC_IO_EXTENT);
++		if ((val & 0xFF00) == 0x3300) {
++			goto proceed;
++		}
++	}
++
++  printk(KERN_ERR "%s: smc91x chip not found, returning -ENXIO\n", __FUNCTION__);
++  return -ENXIO;
++
++proceed:
++  printk(KERN_ERR "%s: smc91x chip found\n", __FUNCTION__);
++
++  // Now look for a second smc91x
++	// If either if statement fails, then we'll drop out and return -ENXIO
+ 	// if both succeed, then we'll skip that and just proceed with 2 cards
+-	if(request_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT, "smc91x probe"))
++	if(request_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT, "smc91x1 probe"))
+ 	{
+ 		ioaddr = ioremap(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
+ 		val = ioread16(ioaddr + BANK_SELECT);
+ 		iounmap(ioaddr);
+ 		release_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
+ 		if ((val & 0xFF00) == 0x3300) {
+-			goto proceed;
++			goto proceed1;
+ 		}
+ 	}
++  
+ 
+ turn_off_eth1:
+ 	// This is apparently not an SMC91C111
+@@ -110,7 +134,8 @@
+ 	smc91x_devices[1] = NULL;
+ 	pxa_gpio_mode(78 | GPIO_IN);
+ 	
+-proceed:
++proceed1:
++  printk(KERN_ERR "%s: found %d smc91x chip(s)\n", __FUNCTION__);
+ 	pxa_gpio_mode(GPIO15_nCS_1_MD);
+ 
+ 	if(smc91x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
diff --git a/packages/linux/gumstix-kernel-2.6.21/tsc2003.c b/packages/linux/gumstix-kernel-2.6.21/tsc2003.c
index d0f496617e..a4a68b756d 100644
--- a/packages/linux/gumstix-kernel-2.6.21/tsc2003.c
+++ b/packages/linux/gumstix-kernel-2.6.21/tsc2003.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2005 Bill Gatliff <bgat at billgatliff.com>
  *  Changes for 2.6.20 kernel by Nicholas Chen <nchen at cs.umd.edu>
+ *  Changes for 2.6.21 kernel by Chris Dollar <chris.dollar at gmail.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -25,669 +26,442 @@
 #include <linux/delay.h>
 #include <asm-arm/arch-pxa/irqs.h>
 
-static unsigned short normal_i2c[]
-= {0x48, I2C_CLIENT_END };
+#define DRIVER_NAME "tsc2003"
+#define TSC2003_CMD(cn,pdn,m) (((cn) << 4) | ((pdn) << 2) | ((m) << 1))
+#define ADC_MAX ((1 << 12) - 1)
 
-I2C_CLIENT_INSMOD_1(tsc2003);
+//#define CONFIG_I2C_DEBUG_CHIP 1
 
-#define DRIVER_NAME "tsc2003"
+static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD_1(tsc2003);
 
 enum tsc2003_pd {
-  PD_POWERDOWN = 0, /* penirq */
-  PD_IREFOFF_ADCON = 1, /* no penirq */
-  PD_IREFON_ADCOFF = 2, /* penirq */
-  PD_IREFON_ADCON = 3, /* no penirq */
-  PD_PENIRQ_ARM = PD_IREFON_ADCOFF,
-  PD_PENIRQ_DISARM = PD_IREFON_ADCON,
+	PD_POWERDOWN = 0, /* penirq */
+	PD_IREFOFF_ADCON = 1, /* no penirq */
+	PD_IREFON_ADCOFF = 2, /* penirq */
+	PD_IREFON_ADCON = 3, /* no penirq */
+	PD_PENIRQ_ARM = PD_IREFON_ADCOFF,
+	PD_PENIRQ_DISARM = PD_IREFON_ADCON,
 };
 
 enum tsc2003_m {
-  M_12BIT = 0,
-  M_8BIT = 1
+	M_12BIT = 0,
+	M_8BIT = 1
 };
 
 enum tsc2003_cmd {
-  MEAS_TEMP0 = 0,
-  MEAS_VBAT1 = 1,
-  MEAS_IN1 = 2,
-  MEAS_TEMP1 = 4,
-  MEAS_VBAT2 = 5,
-  MEAS_IN2 = 6,
-  ACTIVATE_NX_DRIVERS = 8,
-  ACTIVATE_NY_DRIVERS = 9,
-  ACTIVATE_YNX_DRIVERS = 10,
-  MEAS_XPOS = 12,
-  MEAS_YPOS = 13,
-  MEAS_Z1POS = 14,
-  MEAS_Z2POS = 15
+	MEAS_TEMP0 = 0,
+	MEAS_VBAT1 = 1,
+	MEAS_IN1 = 2,
+	MEAS_TEMP1 = 4,
+	MEAS_VBAT2 = 5,
+	MEAS_IN2 = 6,
+	ACTIVATE_NX_DRIVERS = 8,
+	ACTIVATE_NY_DRIVERS = 9,
+	ACTIVATE_YNX_DRIVERS = 10,
+	MEAS_XPOS = 12,
+	MEAS_YPOS = 13,
+	MEAS_Z1POS = 14,
+	MEAS_Z2POS = 15
 };
 
-#define TSC2003_CMD(cn,pdn,m) (((cn) << 4) | ((pdn) << 2) | ((m) << 1))
-
-#define ADC_MAX ((1 << 12) - 1)
-
 struct tsc2003_data {
-  struct i2c_client client;
-  struct device_driver driver;
-  struct input_dev *idev;
-  struct timer_list penirq_timer;
-  struct semaphore sem;
-  struct task_struct *tstask;
-  struct completion tstask_completion;
-  struct completion penirq_completion;
-  enum tsc2003_pd pd;
-  enum tsc2003_m m;
-  int penirq;
-
-  int vbat1;
-  int vbat2;
-  int temp0;
-  int temp1;
-  int in1;
-  int in2;
+	struct i2c_client client;
+	struct device_driver driver;
+	struct input_dev *idev;
+	struct semaphore sem;
+	struct task_struct *tstask;
+	struct completion tstask_completion;
+	struct completion penirq_completion;
+	enum tsc2003_pd pd;
+	enum tsc2003_m m;
+	int penirq;
+
+	int vbat1;
+	int vbat2;
+	int temp0;
+	int temp1;
+	int in1;
+	int in2;
 };
 
-static int tsc2003_i2c_detect (struct i2c_adapter *adapter, int address, 
-int kind);
+static int
+		tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind);
 
-static inline int tsc2003_command (struct tsc2003_data *data,
-                                   enum tsc2003_cmd cmd,
-                                   enum tsc2003_pd pd)
-{
-  char c;
-  int ret;
-  down(&data->sem);
-  c = TSC2003_CMD(cmd, pd, data->m);
-  ret = i2c_master_send(&data->client, &c, 1);
-  up(&data->sem);
-  return ret;
-}
+static int tsc2003_read(struct tsc2003_data *data, enum tsc2003_cmd cmd,
+		enum tsc2003_pd pd, int *val) {
+	char c;
+	char d[2];
+	int ret;
 
-static int tsc2003_read (struct tsc2003_data *data,
-                         enum tsc2003_cmd cmd,
-                         enum tsc2003_pd pd,
-                         int *val)
-{
-  char c;
-  char d[2];
-  int ret;
-
-  c = TSC2003_CMD(cmd, pd, data->m);
-  ret = i2c_master_send(&data->client, &c, 1);
-  if (ret <= 0) goto err;
-
-  udelay(20);
-  ret = i2c_master_recv(&data->client, d, data->m == M_12BIT ? 2 : 1);
-  if (ret <= 0) goto err;
-
-  if (val)
-    {
-      *val = d[0];
-      *val <<= 4;
-      if (data->m == M_12BIT)
-        *val += (d[1] >> 4);
-    }
+	c = TSC2003_CMD(cmd, pd, data->m);
+	ret = i2c_master_send(&data->client, &c, 1);
+	if (ret <= 0)
+		goto err;
+
+	udelay(20);
+	ret = i2c_master_recv(&data->client, d, data->m == M_12BIT ? 2 : 1);
+	if (ret <= 0)
+		goto err;
+
+	if (val) {
+		*val = d[0];
+		*val <<= 4;
+		if (data->m == M_12BIT)
+			*val += (d[1] >> 4);
+	}
 
 #if defined(CONFIG_I2C_DEBUG_CHIP)
-  printk(KERN_ERR "%s: val[%x] = %d\n",
-         __FUNCTION__, cmd, (((int)d[0]) << 8) + d[1]);
+	printk(KERN_ERR "%s: val[%x] = %d\n",
+			__FUNCTION__, cmd, (((int)d[0]) << 8) + d[1]);
 #endif
 
-  return 0;
- err:
-  if (!ret) ret = -ENODEV;
-  return ret;
+	return 0;
+	err: if (!ret)
+		ret = -ENODEV;
+	return ret;
 }
 
-static inline int tsc2003_read_temp0 (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *t)
-{
-  return tsc2003_read(d, MEAS_TEMP0, pd, t);
+static inline int tsc2003_read_temp0(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *t) {
+	return tsc2003_read(d, MEAS_TEMP0, pd, t);
 }
 
-static inline int tsc2003_read_temp1 (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *t)
-{
-  return tsc2003_read(d, MEAS_TEMP1, pd, t);
+static inline int tsc2003_read_temp1(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *t) {
+	return tsc2003_read(d, MEAS_TEMP1, pd, t);
 }
 
-static inline int tsc2003_read_xpos (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *x)
-{
-  return tsc2003_read(d, MEAS_XPOS, pd, x);
+static inline int tsc2003_read_xpos(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *x) {
+	return tsc2003_read(d, MEAS_XPOS, pd, x);
 }
 
-static inline int tsc2003_read_ypos (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *y)
-{
-  return tsc2003_read(d, MEAS_YPOS, pd, y);
+static inline int tsc2003_read_ypos(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *y) {
+	return tsc2003_read(d, MEAS_YPOS, pd, y);
 }
 
-static inline int tsc2003_read_pressure (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *p)
-{
-  return tsc2003_read(d, MEAS_Z1POS, pd, p);
+static inline int tsc2003_read_pressure(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *p) {
+	return tsc2003_read(d, MEAS_Z1POS, pd, p);
 }
 
-static inline int tsc2003_read_in1 (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *t)
-{
-  return tsc2003_read(d, MEAS_IN1, pd, t);
+static inline int tsc2003_read_in1(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *t) {
+	return tsc2003_read(d, MEAS_IN1, pd, t);
 }
 
-static inline int tsc2003_read_in2 (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *t)
-{
-  return tsc2003_read(d, MEAS_IN2, pd, t);
+static inline int tsc2003_read_in2(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *t) {
+	return tsc2003_read(d, MEAS_IN2, pd, t);
 }
 
-static inline int tsc2003_read_vbat1 (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *t)
-{
-  return tsc2003_read(d, MEAS_VBAT1, pd, t);
+static inline int tsc2003_read_vbat1(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *t) {
+	return tsc2003_read(d, MEAS_VBAT1, pd, t);
 }
 
-static inline int tsc2003_read_vbat2 (struct tsc2003_data *d, enum 
-tsc2003_pd pd, int *t)
-{
-  return tsc2003_read(d, MEAS_VBAT2, pd, t);
+static inline int tsc2003_read_vbat2(struct tsc2003_data *d, enum
+tsc2003_pd pd, int *t) {
+	return tsc2003_read(d, MEAS_VBAT2, pd, t);
 }
 
-static inline int tsc2003_powerdown (struct tsc2003_data *d)
-{
-  /* we don't have a distinct powerdown command,
-     so do a benign read with the PD bits cleared */
-  return tsc2003_read(d, MEAS_IN1, PD_POWERDOWN, 0);
+static inline int tsc2003_powerdown(struct tsc2003_data *d) {
+	/* we don't have a distinct powerdown command,
+	 so do a benign read with the PD bits cleared */
+	return tsc2003_read(d, MEAS_IN1, PD_POWERDOWN, 0);
 }
 
-void tsc2003_init_client (struct i2c_client *client)
-{
-  struct tsc2003_data *data = i2c_get_clientdata(client);
+void tsc2003_init_client(struct i2c_client *client) {
+	struct tsc2003_data *data = i2c_get_clientdata(client);
 
-  data->pd = PD_PENIRQ_DISARM;
-  data->m = M_8BIT;
-  return;
+	data->pd = PD_PENIRQ_DISARM;
+	data->m = M_8BIT;
+	return;
 }
 
-#define PENUP_TIMEOUT 50 /* msec */
+static irqreturn_t tsc2003_penirq(int irq, void *v) {
+	struct tsc2003_data *d = v;
 
-static irqreturn_t tsc2003_penirq (int irq, void *v)
-{
-  struct tsc2003_data *d = v;
-  complete(&d->penirq_completion);
-  return IRQ_HANDLED;
-}
+	printk(KERN_INFO "penirq: %Ld\n", jiffies);
 
-/*
-static int tsc2003_remove (struct device *dev)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct tsc2003_data, driver);
-  free_irq(d->penirq,d);
-  input_unregister_device(d->idev);
-  return 0;
-}
-*/
+    // disable the penirq while we take the sample					
+	disable_irq_nosync(d->penirq);
 
-static void tsc2003_pen_up (unsigned long v)
-{
-  struct tsc2003_data *d = (struct tsc2003_data *)v;
-  input_report_abs(d->idev, ABS_PRESSURE, 0);
-  input_sync(d->idev);
-  return;
+	complete(&d->penirq_completion);
+	return IRQ_HANDLED;
 }
 
-static inline void tsc2003_restart_pen_up_timer (struct tsc2003_data *d)
-{
-  mod_timer(&d->penirq_timer, jiffies + (PENUP_TIMEOUT * HZ) / 1000);
+static void tsc2003_pen_up(unsigned long v) {
+    printk(KERN_INFO "tsc2003_pen_up - re-enable irq now\n");
+	struct tsc2003_data *d = (struct tsc2003_data *)v;
+
+    enable_irq(d->penirq);
+
+	input_report_abs(d->idev, ABS_PRESSURE, 0);
+	input_sync(d->idev);
+	return;
 }
 
-static int tsc2003ts_thread (void *v)
-{
-  struct tsc2003_data *d = v;
-  struct task_struct *tsk = current;
-  int ret;
-  
-  d->tstask = tsk;
+static int tsc2003ts_thread(void *v) {
+	struct tsc2003_data *d = v;
+	struct task_struct *tsk = current;
+	int ret;
+	int err = 0;
+
+	d->tstask = tsk;
 
-  daemonize(DRIVER_NAME "tsd");
-  allow_signal(SIGKILL);
+	daemonize(DRIVER_NAME "tsd");
+	allow_signal(SIGKILL);
 
-  complete(&d->tstask_completion);
+	complete(&d->tstask_completion);
 
 #if defined(CONFIG_I2C_DEBUG_CHIP)
-  printk(KERN_INFO "%s: address 0x%x\n",
-         __FUNCTION__, d->client.addr);
-#endif
+	printk(KERN_INFO "%s: address 0x%x\n",
+			__FUNCTION__, d->client.addr);
+#endif		
+			
+	do {
+      unsigned int x, y, p, fp;
+      int pen_is_up = 0;
+      
+      down(&d->sem);         
+
+      // take the sample
+      d->pd = PD_PENIRQ_DISARM;
+      tsc2003_read_xpos(d, PD_PENIRQ_DISARM, &x);
+      tsc2003_read_ypos(d, PD_PENIRQ_DISARM, &y);
+      tsc2003_read_pressure(d, PD_PENIRQ_DISARM, &p);
+
+      if (p < 64) {
+        p=0;
+      }
 
-  while (!signal_pending(tsk))
-    {
-      unsigned int x, y, p;
-     
-      if (!down_interruptible(&d->sem))
-        {
-          d->pd = PD_PENIRQ_DISARM;
-          disable_irq(d->penirq);
-          tsc2003_read_xpos(d, PD_PENIRQ_DISARM, &x);
-          tsc2003_read_ypos(d, PD_PENIRQ_DISARM, &y);
-          tsc2003_read_pressure(d, PD_PENIRQ_DISARM, &p);
-         
-          /* non-X-Y driver read to avoid glitch in penirq (errata?) */
-          tsc2003_read_vbat1(d, PD_PENIRQ_DISARM, 0);
-          enable_irq(d->penirq);
-         
-	  
-          input_report_abs(d->idev, ABS_X, 4096 - x);
-          input_report_abs(d->idev, ABS_Y, 4096 - y);
-          input_report_abs(d->idev, ABS_PRESSURE, p);
-         input_sync(d->idev);
-  
-         
-          do
-            {
-              ret = wait_for_completion_interruptible_timeout(&d->penirq_completion, HZ / 100);
-              if (ret)
-                {
-                  if (d->pd == PD_PENIRQ_DISARM)
-                    {
-                      /* fake penirq, avoid glitch and then start watching for real now */
-                      d->pd = PD_PENIRQ_ARM;
-                      tsc2003_read_vbat1(d, PD_PENIRQ_ARM, 0);
-                      up(&d->sem);
-                    }
-                  else
-                    {
-                      /* pen down event, (re)start the pen up timer */
-                      tsc2003_restart_pen_up_timer(d);
-                    }
-                }
-              else
-                {
-                  if (d->pd != PD_PENIRQ_ARM)
-                    {
-                      /* fake penirq never arrived, which would be the case
-                         for a level-triggered irq line */
-                      tsc2003_read_vbat1(d, PD_PENIRQ_ARM, 0);
-                      d->pd = PD_PENIRQ_ARM;
-                      up(&d->sem);
-                    }
-                  if (timer_pending(&d->penirq_timer))
-                    {
-                      /* pen is down, time to send (another) sample */
-                      break;
-                    }
-                  else
-                    {
-                      /* pen is up, nothing to do but wait for it to 
-			come down */			
-			wait_for_completion_interruptible(&d->penirq_completion);
-                      /* pen is down, (re)start the pen up timer */
-                      tsc2003_restart_pen_up_timer(d);
-                      break;
-                    }
-                }
-            }
-          while (!signal_pending(tsk));
-        }
-    }
-     
-  d->tstask = NULL;
-  complete_and_exit(&d->tstask_completion, 0);
-}
+#if defined(CONFIG_I2C_DEBUG_CHIP)
+      printk(KERN_INFO "TSD X: %d Y: %d P: %d\n", x, y, p);
+#endif		
+
+      if (!pen_is_up) {
+        // report our touch to the input layer
+        input_report_abs(d->idev, ABS_X, 4096 - x);
+        input_report_abs(d->idev, ABS_Y, 4096 - y);
+        input_report_abs(d->idev, ABS_PRESSURE, p);
+        input_sync(d->idev);
+      }
+
+      if(p == 0) {
+#if defined(CONFIG_I2C_DEBUG_CHIP)
+        printk(KERN_INFO "No pressure - pen is up!\n");
+#endif		
+        // set our pen as up
+        pen_is_up = 1;                            
+      }                    
+      else {                    
+#if defined(CONFIG_I2C_DEBUG_CHIP)
+        printk(KERN_INFO "Pen is still down - sleeping and will re-sample!\n");
+#endif		
+        // set our pen as down
+        pen_is_up = 0;                            
+      }
 
-static int tsc2003_idev_open (struct input_dev *idev)
-{
-  struct tsc2003_data *d = idev->private;
-  int ret = 0;
+      // sleep for 3 jiffies to give us about 30 updates/sec
+      msleep (3);
 
-  if (down_interruptible(&d->sem))
-    return -EINTR;
+      up(&d->sem);
 
-  if (d->tstask)
-    panic(DRIVER_NAME "tsd already running (!). abort.");
-  
-  d->penirq_timer.data = (unsigned long)d;
-  d->penirq_timer.function = tsc2003_pen_up;
+	} while (!signal_pending(tsk));
 
-  ret = kernel_thread(tsc2003ts_thread, d, CLONE_KERNEL);
-  if (ret >= 0)
-  {
-      wait_for_completion(&d->tstask_completion);
-      ret = 0;
-   }
+	d->tstask = NULL;
+	complete_and_exit(&d->tstask_completion, 0);
+}
 
-   
+static int tsc2003_idev_open(struct input_dev *idev) {
+	struct tsc2003_data *d = idev->private;
+	int ret = 0;
 
-  up(&d->sem);
-  return ret;
-}
+	if (down_interruptible(&d->sem))
+		return -EINTR;
 
-static void tsc2003_idev_close (struct input_dev *idev)
-{
-  struct tsc2003_data *d = idev->private;
-  down_interruptible(&d->sem);
-  if (d->tstask)
-    {
-      send_sig(SIGKILL, d->tstask, 1);
-      wait_for_completion(&d->tstask_completion);
-    }
-
-  if (timer_pending(&d->penirq_timer))
-    del_timer(&d->penirq_timer);
-  up(&d->sem);
-  return;
-}
+	if (d->tstask)
+		panic(DRIVER_NAME "tsd already running (!). abort.");
 
-#if defined(CONFIG_SYSFS) && defined(CONFIG_SENSORS_TSC2003_SYSFS)
-static ssize_t show_addr (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->client.addr);
-}
-static DEVICE_ATTR(addr, S_IRUGO, show_addr, NULL);
+	ret = kernel_thread(tsc2003ts_thread, d, CLONE_KERNEL);
+	if (ret >= 0) {
+		wait_for_completion(&d->tstask_completion);
+		ret = 0;
+	}
 
-static ssize_t show_vbat1 (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->vbat1);
+	up(&d->sem);
+	return ret;
 }
-static DEVICE_ATTR(vbat1, S_IRUGO, show_vbat1, NULL);
 
-static ssize_t show_vbat2 (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->vbat2);
-}
-static DEVICE_ATTR(vbat2, S_IRUGO, show_vbat2, NULL);
+static void tsc2003_idev_close(struct input_dev *idev) {
+	struct tsc2003_data *d = idev->private;
+	down_interruptible(&d->sem);
+	if (d->tstask) {
+		send_sig(SIGKILL, d->tstask, 1);
+		wait_for_completion(&d->tstask_completion);
+	}
 
-static ssize_t show_in1 (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->in1);
+	up(&d->sem);
+	return;
 }
-static DEVICE_ATTR(in1, S_IRUGO, show_in1, NULL);
 
-static ssize_t show_in2 (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->in2);
+static int tsc2003_detect_irq(struct tsc2003_data *d) {
+	d->penirq = IRQ_GPIO(16); //PWM0 GPIO
+	return 0;
 }
-static DEVICE_ATTR(in2, S_IRUGO, show_in2, NULL);
 
-static ssize_t show_temp0 (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->temp0);
-}
-static DEVICE_ATTR(temp0, S_IRUGO, show_temp0, NULL);
+static int tsc2003_driver_register(struct tsc2003_data *data) {
+	struct input_dev *idev;
+	int ret = 0;
+	int error;
 
-static ssize_t show_temp1 (struct device *dev, char *buf)
-{
-  struct tsc2003_data *d = container_of(dev->driver, struct 
-tsc2003_data, driver);
-  return sprintf(buf, "%d\n", d->temp1);
-}
-static DEVICE_ATTR(temp1, S_IRUGO, show_temp1, NULL);
+	init_MUTEX(&data->sem);
 
-#warning "TODO: this daemon sometimes hangs the touchscreen daemon"
-#warning "TODO: under periods of heavy touch screen activity."
-#warning "TODO: Use with caution until the bug is squashed."
-static int tsc2003s_thread (void *v)
-{
-  struct tsc2003_data *d = v;
-
-  daemonize(DRIVER_NAME "sd");
-  allow_signal(SIGKILL);
-
-  printk(KERN_INFO "%s: address 0x%x\n",
-         __FUNCTION__, d->client.addr);
-
-  while (!signal_pending(current))
-    {
-      if (!down_interruptible(&d->sem))
-        {
-          if (!timer_pending(&d->penirq_timer))
-            {
-              tsc2003_read_vbat1(d, d->pd, &d->vbat1);
-              tsc2003_read_vbat2(d, d->pd, &d->vbat2);
-              tsc2003_read_in1(d, d->pd, &d->in1);
-              tsc2003_read_in2(d, d->pd, &d->in2);
-              tsc2003_read_temp0(d, d->pd, &d->temp0);
-              tsc2003_read_temp1(d, d->pd, &d->temp1);
-            }
-          up(&d->sem);
-        }
-      set_task_state(current, TASK_INTERRUPTIBLE);
-      schedule_timeout(5 * HZ);
-    }
-  do_exit(0);
-}
-#endif
+	error = tsc2003_detect_irq(data);
+	if (error) {
+		printk(KERN_ERR "TSC2003: IRQ probe failed\n");
+	}
 
-static int tsc2003_detect_irq (struct tsc2003_data *d)
-{
-	d->penirq = IRQ_GPIO(16);	//PWM0 GPIO
-	return 0;
-}
+	if (data->penirq) {
+		ret = request_irq(data->penirq, tsc2003_penirq, SA_INTERRUPT | IRQF_TRIGGER_LOW,
+				DRIVER_NAME, data);
+		if (!ret) {
+			printk(KERN_INFO "%s: irq %d\n", __FUNCTION__, data->penirq);
+			init_completion(&data->tstask_completion);
+			init_completion(&data->penirq_completion);
+		} else {
+			printk(KERN_ERR "%s: cannot grab irq %d\n", __FUNCTION__, data->penirq);
+		}
+	}
 
-/*
-static int tsc2003_probe (struct device *dev)
-{
-  //struct platform_device *p = to_platform_device(dev);  
-  struct tsc2003_data *d = container_of(dev->driver, struct tsc2003_data, driver);
-  int ret = 0;  
-  int error;
- 
-  printk(KERN_ERR "TSC2003: tsc2003_probe probing...\n"); 
-
-  error = tsc2003_detect_irq(d);
-   if(error)
-   {
-	printk(KERN_ERR "TSC2003: IRQ probe failed\n");
-   }
-
-   if (d->penirq)
-   {
-      ret = request_irq(d->penirq, tsc2003_penirq, IRQF_TRIGGER_FALLING, DRIVER_NAME, d);
-      if (!ret)
-        {
-          printk(KERN_INFO "%s: irq %d\n", __FUNCTION__, d->penirq);
-        }
-       else
-        {
-	  printk(KERN_INFO "%s: cannot grab irq %d\n", __FUNCTION__, d->penirq);
-        }
-    }
-
-#if defined(CONFIG_SYSFS) && defined(CONFIG_SENSORS_TSC2003_SYSFS)
-  ret = kernel_thread(tsc2003s_thread, d, CLONE_KERNEL);
-  if (ret >= 0)
-    ret = 0;
-
-  device_create_file(dev, &dev_attr_addr);
-  device_create_file(dev, &dev_attr_vbat1);
-  device_create_file(dev, &dev_attr_vbat2);
-  device_create_file(dev, &dev_attr_in1);
-  device_create_file(dev, &dev_attr_in2);
-  device_create_file(dev, &dev_attr_temp0);
-  device_create_file(dev, &dev_attr_temp1);
-#endif
+	idev = input_allocate_device();
+	data->idev = idev;
 
+	idev->private = data;
+	idev->name = DRIVER_NAME;
+	idev->evbit[0] = BIT(EV_ABS);
+	idev->open = tsc2003_idev_open;
+	idev->close = tsc2003_idev_close;
+	idev->absbit[LONG(ABS_X)] = BIT(ABS_X);
+	idev->absbit[LONG(ABS_Y)] = BIT(ABS_Y);
+	idev->absbit[LONG(ABS_PRESSURE)] = BIT(ABS_PRESSURE);
+	input_set_abs_params(idev, ABS_X, 0, ADC_MAX, 0, 0);
+	input_set_abs_params(idev, ABS_Y, 0, ADC_MAX, 0, 0);
+	input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
 
-  return ret;
-}
-*/
+	if (!ret) {
+		input_register_device(idev);
+		printk(KERN_INFO "tsc2003 - registering input device\n");
+	}
 
-static int tsc2003_driver_register (struct tsc2003_data *data)
-{
-  struct input_dev *idev;
-  int ret = 0;
-  int error;  
-
-  init_MUTEX(&data->sem);
-
-  init_timer(&data->penirq_timer);
-  data->penirq_timer.data = (unsigned long)data;
-  data->penirq_timer.function = tsc2003_pen_up;  
-
-  error = tsc2003_detect_irq(data);
-   if(error)
-   {
-	printk(KERN_ERR "TSC2003: IRQ probe failed\n");
-   }
-
-   if (data->penirq)
-   {
-      ret = request_irq(data->penirq, tsc2003_penirq, IRQF_TRIGGER_FALLING, DRIVER_NAME, data);
-      if (!ret)
-        {
-          printk(KERN_INFO "%s: irq %d\n", __FUNCTION__, data->penirq);
-	  init_completion(&data->tstask_completion);
-	  init_completion(&data->penirq_completion);
-        }
-       else
-        {
-	  printk(KERN_ERR "%s: cannot grab irq %d\n", __FUNCTION__, data->penirq);
-        }
-    }
-  
-  idev = input_allocate_device();
-  data->idev = idev;
-
-  idev->private = data;
-  idev->name = DRIVER_NAME;
-  idev->evbit[0] = BIT(EV_ABS);
-  idev->open = tsc2003_idev_open;
-  idev->close = tsc2003_idev_close;
-  idev->absbit[LONG(ABS_X)] = BIT(ABS_X);
-  idev->absbit[LONG(ABS_Y)] = BIT(ABS_Y);
-  idev->absbit[LONG(ABS_PRESSURE)] = BIT(ABS_PRESSURE);
-  input_set_abs_params(idev, ABS_X, 0, ADC_MAX, 0, 0);
-  input_set_abs_params(idev, ABS_Y, 0, ADC_MAX, 0, 0);
-  input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
-
-  if (!ret)
-  {
-    input_register_device(idev);
-        printk(KERN_INFO "tsc2003 - registering input device\n");
-  }
-
-  return ret;
+	return ret;
 }
 
-static int tsc2003_i2c_attach_adapter(struct i2c_adapter *adapter)
-{
-  printk(KERN_INFO "tsc2003 i2c touch screen controller\n");
-  printk(KERN_INFO "Bill Gatliff <bgat at billgatliff.com\n");
-  printk(KERN_INFO "Nicholas Chen <nchen at cs.umd.edu>\n");
- 
-  return i2c_probe(adapter, &addr_data, tsc2003_i2c_detect);
+static int tsc2003_i2c_attach_adapter(struct i2c_adapter *adapter) {
+	printk(KERN_INFO "tsc2003 i2c touch screen controller\n");
+	printk(KERN_INFO "Bill Gatliff <bgat at billgatliff.com\n");
+    printk(KERN_INFO "Nicholas Chen <nchen at cs.umd.edu>\n");
+
+    return i2c_probe(adapter, &addr_data, tsc2003_i2c_detect);
 }
 
-static int tsc2003_i2c_detach_client(struct i2c_client *client)
-{
-  int err;  
-  struct tsc2003_data *d = i2c_get_clientdata(client);
+static int tsc2003_i2c_detach_client(struct i2c_client *client) {
+	int err;
+	struct tsc2003_data *d = i2c_get_clientdata(client);
 
-  free_irq(d->penirq,d);
-  input_unregister_device(d->idev);
+	free_irq(d->penirq, d);
+	input_unregister_device(d->idev);
 
-  if ((err = i2c_detach_client(client))) {
-    dev_err(&client->dev, "Client deregistration failed, "
-            "client not detached.\n");
-    return err;
-  }
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
 
-  return 0;
+	return 0;
 }
 
-static struct i2c_driver tsc2003_driver = {
-  .driver = {
-	  .owner        = THIS_MODULE,
-	  .name         = DRIVER_NAME,
-   },
-  .attach_adapter    = tsc2003_i2c_attach_adapter,
-  .detach_client    = tsc2003_i2c_detach_client,
-  //  .command              = tsc2003_command,
+static struct i2c_driver tsc2003_driver = { 
+    .driver = {
+	    .owner = THIS_MODULE,
+	    .name = DRIVER_NAME,
+    }, 
+    .attach_adapter = tsc2003_i2c_attach_adapter,
+    .detach_client = tsc2003_i2c_detach_client, 
 };
 
-static int tsc2003_i2c_detect (struct i2c_adapter *adapter, int address, 
-int kind)
-{
-  struct i2c_client *new_client;
-  struct tsc2003_data *data;
-
-  int err = 0;
-  const char *name = "";
-
-  if (!i2c_check_functionality(adapter,
-                               I2C_FUNC_SMBUS_BYTE_DATA
-                               | I2C_FUNC_I2C
-                               | I2C_FUNC_SMBUS_WORD_DATA))
-    goto exit;
-
-  data = kcalloc(1, sizeof(*data), GFP_KERNEL);
-  if (!data) {
-    err = -ENOMEM;
-    goto exit;
-  }
-
-  new_client = &data->client;
-  i2c_set_clientdata(new_client, data);
-  new_client->addr = address;
-  new_client->adapter = adapter;
-  new_client->driver = &tsc2003_driver;
-  new_client->flags = 0;
-
-  /* TODO: I'm pretty sure I'm not dealing with kind correctly */
-  if (kind == 0 /* identification */ || kind < 0 /* detection */)
-      kind = tsc2003;
-
-  if (kind == tsc2003)
-    name = DRIVER_NAME;
-
-  /* try a command, see if we get an ack;
-     if we do, assume it's our device */
-  printk(KERN_INFO "%s: probing address 0x%x\n",
-         __FUNCTION__, address);
-  err = tsc2003_powerdown(data);
-  if (err >= 0)
-    {
-      strlcpy(new_client->name, name, I2C_NAME_SIZE);
-      err = i2c_attach_client(new_client);
-      if (err) goto exit_free;
-
-      tsc2003_init_client(new_client);
-
-      err = tsc2003_driver_register(data);
-      if (err < 0) goto exit_free;
-     
-      printk(KERN_INFO "%s: device address 0x%x attached.\n",
-             __FUNCTION__, address);
-      return 0;
-    }
-  /* failure to detect when everything else is ok isn't an error */
-  else err = 0;
-
- exit_free:
-  kfree(new_client);
- exit:
-  return err;
+static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind) {
+	struct i2c_client *new_client;
+	struct tsc2003_data *data;
+
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+			| I2C_FUNC_I2C | I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	data = kcalloc(1, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &tsc2003_driver;
+	new_client->flags = 0;
+
+	/* TODO: I'm pretty sure I'm not dealing with kind correctly */
+	if (kind == 0 /* identification */|| kind < 0 /* detection */)
+		kind = tsc2003;
+
+	if (kind == tsc2003)
+		name = DRIVER_NAME;
+
+	/* try a command, see if we get an ack;
+	 if we do, assume it's our device */
+	printk(KERN_INFO "%s: probing address 0x%x\n",
+			__FUNCTION__, address);
+	err = tsc2003_powerdown(data);
+	if (err >= 0) {
+		strlcpy(new_client->name, name, I2C_NAME_SIZE);
+		err = i2c_attach_client(new_client);
+		if (err)
+			goto exit_free;
+
+		tsc2003_init_client(new_client);
+
+		err = tsc2003_driver_register(data);
+		if (err < 0)
+			goto exit_free;
+
+		printk(KERN_INFO "%s: device address 0x%x attached.\n",
+				__FUNCTION__, address);
+		return 0;
+	}
+	/* failure to detect when everything else is ok isn't an error */
+	else
+		err = 0;
+
+	exit_free: kfree(new_client);
+	exit: return err;
 }
 
 static int __init tsc2003_init(void)
 {
-  return i2c_add_driver(&tsc2003_driver);
+	return i2c_add_driver(&tsc2003_driver);
 }
 
 static void __exit tsc2003_exit(void)
 {
-  i2c_del_driver(&tsc2003_driver);
+	i2c_del_driver(&tsc2003_driver);
 }
 
 MODULE_AUTHOR("Bill Gatliff <bgat at billgatliff.com>");
@@ -696,4 +470,3 @@ MODULE_LICENSE("GPL");
 
 module_init(tsc2003_init);
 module_exit(tsc2003_exit);
-
diff --git a/packages/linux/gumstix-kernel_2.6.21.bb b/packages/linux/gumstix-kernel_2.6.21.bb
index 3bc7df238a..e71c972053 100644
--- a/packages/linux/gumstix-kernel_2.6.21.bb
+++ b/packages/linux/gumstix-kernel_2.6.21.bb
@@ -1,7 +1,7 @@
 require gumstix-linux.inc
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
-       ${@base_contains('MACHINE_FEATURES', 'lcd','file://defconfig', 'file://defconfig-nofb',d)} \
+       file://defconfig \
        file://tsc2003.c \
        file://tsc2003-config.diff;patch=1 \
        file://pxa-regs-additions.patch;patch=1 \
@@ -46,9 +46,37 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
        file://gumstix-pxa270-mmc.patch;patch=1 \
        file://pxafb-18bpp-mode.patch;patch=1 \
        file://smc911x-fixup.patch;patch=1 \
+       file://smc91x-fail-if-no-chip.patch;patch=1 \
+       file://one-wire.patch;patch=1 \
+       ${@base_contains('MACHINE_FEATURES', 'rgb16','file://pxafb-backto16.patch;patch=1', '',d)} \
        "
 
 do_configure_prepend() {
-       ${@base_contains('MACHINE_FEATURES', 'lcd','','mv ${WORKDIR}/defconfig-nofb ${WORKDIR}/defconfig',d)}
+
        cp ${WORKDIR}/tsc2003.c ${S}/drivers/i2c/chips/
+
+       # turn off frame buffer support in kernel if lcd MACHINE_FEATURES not defined    
+       ${@base_contains('MACHINE_FEATURES', 'lcd','','sed -i "s/CONFIG_FB=y/# CONFIG_FB is not set/" ${WORKDIR}/defconfig',d)}
+       ${@base_contains('MACHINE_FEATURES', 'lcd','','sed -i "s/CONFIG_FB_PXA=y/# CONFIG_FB_PXA is not set/" ${WORKDIR}/defconfig',d)}
+       ${@base_contains('MACHINE_FEATURES', 'lcd','','sed -i "s/CONFIG_FRAMEBUFFER_CONSOLE=y/# CONFIG_FRAMEBUFFER_CONSOLE is not set/" ${WORKDIR}/defconfig',d)}
+       ${@base_contains('MACHINE_FEATURES', 'lcd','','sed -i "s/CONFIG_LOGO=y/# CONFIG_LOGO is not set/" ${WORKDIR}/defconfig',d)}
+
+       # if mmcroot MACHINE_FEATURES requested disable jffs2 and enable mmc and ext2 support in kernel
+       ${@base_contains('MACHINE_FEATURES', 'mmcroot','sed -i "s/CONFIG_JFFS2_FS=y/CONFIG_JFFS2_FS=m/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'mmcroot','sed -i "s/CONFIG_EXT2_FS=m/CONFIG_EXT2_FS=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'mmcroot','sed -i "s/CONFIG_MMC=m/CONFIG_MMC=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'mmcroot','sed -i "s/CONFIG_MMC_PXA=m/CONFIG_MMC_PXA=y/" ${WORKDIR}/defconfig','',d)} 
+       ${@base_contains('MACHINE_FEATURES', 'mmcroot','sed -i "s/CONFIG_MMC_BLOCK=m/CONFIG_MMC_BLOCK=y/" ${WORKDIR}/defconfig','',d)} 
+
+       # if cfroot MACHINE_FEATURES requested disable jffs2 and enable pcmcia and ext2 support in kernel
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_JFFS2_FS=y/CONFIG_JFFS2_FS=m/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_EXT2_FS=m/CONFIG_EXT2_FS=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_PCCARD=m/CONFIG_PCCARD=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_PCMCIA=m/CONFIG_PCMCIA=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_PCMCIA_PXA2XX=m/CONFIG_PCMCIA_PXA2XX=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_IDE=m/CONFIG_IDE=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_BLK_DEV_IDE=m/CONFIG_BLK_DEV_IDE=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_BLK_DEV_IDEDISK=m/CONFIG_BLK_DEV_IDEDISK=y/" ${WORKDIR}/defconfig','',d)}
+       ${@base_contains('MACHINE_FEATURES', 'cfroot','sed -i "s/CONFIG_BLK_DEV_IDECS=m/CONFIG_BLK_DEV_IDECS=y/" ${WORKDIR}/defconfig','',d)}
+
 }