linux-omap git: update to 2.6.28rc6, remove patches that were applied

7 files changed, 11 insertions, 721 deletions

diff --git a/packages/linux/linux-omap/beagleboard/defconfig b/packages/linux/linux-omap/beagleboard/defconfig
index ce06b21672..cf6cc12d6e 100644
--- a/packages/linux/linux-omap/beagleboard/defconfig
+++ b/packages/linux/linux-omap/beagleboard/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3-omap1
-# Tue Nov 11 15:45:33 2008
+# Linux kernel version: 2.6.28-rc4-omap1
+# Mon Nov 17 15:37:33 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -801,7 +801,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -1314,6 +1314,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14
 CONFIG_FB_OMAP2=y
 CONFIG_FB_OMAP2_DEBUG=y
@@ -1323,11 +1324,11 @@ CONFIG_FB_OMAP2_DEBUG=y
 # OMAP2/3 Display Device Drivers
 #
 CONFIG_PANEL_DVI=y
-# CONFIG_PANEL_DVI_LOWLOWRES is not set
-# CONFIG_PANEL_DVI_LOWRES is not set
-CONFIG_PANEL_DVI_HIGHRES=y
-# CONFIG_PANEL_DVI_VERYHIGHRES is not set
-# CONFIG_PANEL_SDP3430 is not set
+# CONFIG_PANEL_DVI_640X480 is not set
+# CONFIG_PANEL_DVI_800X600 is not set
+CONFIG_PANEL_DVI_1024X768=y
+# CONFIG_PANEL_DVI_1280X1024 is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1734,14 +1735,7 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
 
 #
diff --git a/packages/linux/linux-omap/fix-asoc.diff b/packages/linux/linux-omap/fix-asoc.diff
deleted file mode 100644
index 4948e932fb..0000000000
--- a/packages/linux/linux-omap/fix-asoc.diff
+++ /dev/null
@@ -1,130 +0,0 @@
-From linux-omap-owner@vger.kernel.org Mon Nov 10 23:48:17 2008
-Date: 	Mon, 10 Nov 2008 14:36:32 -0800
-From: "Steve Sakoman" <sakoman@gmail.com>
-To: "Philip Balister" <philip@balister.org>
-Subject: Re: ASOC and the Beagle
-Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
-        "Tony Lindgren" <tony@atomide.com>
-
-On Mon, Nov 10, 2008 at 12:38 PM, Steve Sakoman <sakoman@gmail.com> wrote:
-> On Mon, Nov 10, 2008 at 7:10 AM, Philip Balister <philip@balister.org> wrote:
->> A few weeks ago kernels built from git would detect the sound hardware and
->> actually work.
->>
->> Yesterday I build a kernel and the sound hardware is no longer detected. Is
->> there an easy way to fix this?
->>
->> Sorry I'm so vague, I don't have all the revision data handy ....
->
-> I just noticed this too.
->
-> It seems that the Kconfig for soc/omap got damaged in the merge.
->
-> The fix is simple, patch below.
-
-Next time I should build test before posting :-)
-
-Turns out that the Makefile for soc/omap and the Kconfig and Makefile
-for soc/codec also got screwed up in the merge, so those need to be
-fixed.
-
-The complete fix is:
-
-diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
-index 38a0e3b..5df7402 100644
---- a/sound/soc/codecs/Kconfig
-+++ b/sound/soc/codecs/Kconfig
-@@ -10,6 +10,7 @@ config SND_SOC_ALL_CODECS
- 	select SND_SOC_TLV320AIC23
- 	select SND_SOC_TLV320AIC26
- 	select SND_SOC_TLV320AIC3X
-+	select SND_SOC_TWL4030
- 	select SND_SOC_UDA1380
- 	select SND_SOC_WM8510
- 	select SND_SOC_WM8580
-@@ -75,6 +76,10 @@ config SND_SOC_TLV320AIC3X
- 	tristate
- 	depends on I2C
-
-+config SND_SOC_TWL4030
-+	tristate
-+	depends on TWL4030_CORE
-+
- config SND_SOC_UDA1380
-         tristate
-
-diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
-index 90f0a58..3b9b58a 100644
---- a/sound/soc/codecs/Makefile
-+++ b/sound/soc/codecs/Makefile
-@@ -7,6 +7,7 @@ snd-soc-ssm2602-objs := ssm2602.o
- snd-soc-tlv320aic23-objs := tlv320aic23.o
- snd-soc-tlv320aic26-objs := tlv320aic26.o
- snd-soc-tlv320aic3x-objs := tlv320aic3x.o
-+snd-soc-twl4030-objs := twl4030.o
- snd-soc-uda1380-objs := uda1380.o
- snd-soc-wm8510-objs := wm8510.o
- snd-soc-wm8580-objs := wm8580.o
-@@ -29,6 +30,7 @@ obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
- obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
- obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
- obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
-+obj-$(CONFIG_SND_SOC_TWL4030)	+= snd-soc-twl4030.o
- obj-$(CONFIG_SND_SOC_UDA1380)	+= snd-soc-uda1380.o
- obj-$(CONFIG_SND_SOC_WM8510)	+= snd-soc-wm8510.o
- obj-$(CONFIG_SND_SOC_WM8580)	+= snd-soc-wm8580.o
-diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
-index 8b7766b..0daeee4 100644
---- a/sound/soc/omap/Kconfig
-+++ b/sound/soc/omap/Kconfig
-@@ -14,6 +14,14 @@ config SND_OMAP_SOC_N810
- 	help
- 	  Say Y if you want to add support for SoC audio on Nokia N810.
-
-+config SND_OMAP_SOC_OMAP3_BEAGLE
-+	tristate "SoC Audio support for OMAP3 Beagle"
-+	depends on SND_OMAP_SOC && MACH_OMAP3_BEAGLE
-+	select SND_OMAP_SOC_MCBSP
-+	select SND_SOC_TWL4030
-+	help
-+	  Say Y if you want to add support for SoC audio on the Beagleboard.
-+
- config SND_OMAP_SOC_OSK5912
- 	tristate "SoC Audio support for omap osk5912"
- 	depends on SND_OMAP_SOC && MACH_OMAP_OSK
-@@ -21,3 +29,13 @@ config SND_OMAP_SOC_OSK5912
- 	select SND_SOC_TLV320AIC23
- 	help
- 	  Say Y if you want to add support for SoC audio on osk5912.
-+
-+config SND_OMAP_SOC_OVERO
-+	tristate "SoC Audio support for Gumstix Overo"
-+	depends on SND_OMAP_SOC && MACH_OVERO
-+	select SND_OMAP_SOC_MCBSP
-+	select SND_SOC_TWL4030
-+	help
-+	  Say Y if you want to add support for SoC audio on the Gumstix Overo.
-+
-+
-diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
-index e09d1f2..4bae404 100644
---- a/sound/soc/omap/Makefile
-+++ b/sound/soc/omap/Makefile
-@@ -7,7 +7,12 @@ obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
-
- # OMAP Machine Support
- snd-soc-n810-objs := n810.o
-+snd-soc-omap3beagle-objs := omap3beagle.o
- snd-soc-osk5912-objs := osk5912.o
-+snd-soc-overo-objs := overo.o
-
- obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
-+obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
- obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
-+obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
-+
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
-
diff --git a/packages/linux/linux-omap/fix-mmc.diff b/packages/linux/linux-omap/fix-mmc.diff
deleted file mode 100644
index dfc531c3ef..0000000000
--- a/packages/linux/linux-omap/fix-mmc.diff
+++ /dev/null
@@ -1,39 +0,0 @@
-Oops.. Haven't thought to try it without gpio_cd set up, in which case c->mmc
-is not set initialized.. Please try the following patch:
-
-
-diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
-index 0ea6ba6..626d668 100644
---- a/arch/arm/mach-omap2/mmc-twl4030.c
-+++ b/arch/arm/mach-omap2/mmc-twl4030.c
-@@ -239,6 +239,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
- 	u32 reg;
- 	int ret = 0;
- 	struct twl_mmc_controller *c = &hsmmc[0];
-+	struct omap_mmc_platform_data *mmc = dev->platform_data;
- 
- 	if (power_on) {
- 		if (cpu_is_omap2430()) {
-@@ -250,7 +251,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
- 			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
- 		}
- 
--		if (c->mmc->slots[0].internal_clock) {
-+		if (mmc->slots[0].internal_clock) {
- 			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- 			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
- 			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
-@@ -293,11 +294,11 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
- static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
- {
- 	int ret;
--
- 	struct twl_mmc_controller *c = &hsmmc[1];
-+	struct omap_mmc_platform_data *mmc = dev->platform_data;
- 
- 	if (power_on) {
--		if (c->mmc->slots[0].internal_clock) {
-+		if (mmc->slots[0].internal_clock) {
- 			u32 reg;
- 
- 			reg = omap_ctrl_readl(control_devconf1_offset);
diff --git a/packages/linux/linux-omap/musb-dma-iso-in.eml b/packages/linux/linux-omap/musb-dma-iso-in.eml
deleted file mode 100644
index 56fc827a5d..0000000000
--- a/packages/linux/linux-omap/musb-dma-iso-in.eml
+++ /dev/null
@@ -1,138 +0,0 @@
-Fixes blurred capture images in dma mode. Isochronous error field in
-urb and source data buffer pointer were not updated properly in dma
-mode.
-
-Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
----
-diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
-index 08e421f..a481d54 100644
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -1505,10 +1505,29 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
- 
- #ifdef CONFIG_USB_INVENTRA_DMA
-+		if (usb_pipeisoc(pipe)) {
-+			struct usb_iso_packet_descriptor *d;
-+
-+			d = urb->iso_frame_desc + qh->iso_idx;
-+			d->actual_length = xfer_len;
-+
-+			/* even if there was an error, we did the dma
-+			 * for iso_frame_desc->length
-+			 */
-+			if (d->status != EILSEQ && d->status != -EOVERFLOW)
-+				d->status = 0;
-+
-+			if (++qh->iso_idx >= urb->number_of_packets)
-+				done = true;
-+			else
-+				done = false;
-+
-+		} else  {
- 		/* done if urb buffer is full or short packet is recd */
- 		done = (urb->actual_length + xfer_len >=
- 				urb->transfer_buffer_length
- 			|| dma->actual_len < qh->maxpacket);
-+		}
- 
- 		/* send IN token for next packet, without AUTOREQ */
- 		if (!done) {
-@@ -1545,7 +1564,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 		if (dma) {
- 			struct dma_controller	*c;
- 			u16			rx_count;
--			int			ret;
-+			int			ret, length;
-+			dma_addr_t		buf;
- 
- 			rx_count = musb_readw(epio, MUSB_RXCOUNT);
- 
-@@ -1558,6 +1578,35 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 
- 			c = musb->dma_controller;
- 
-+			if (usb_pipeisoc(pipe)) {
-+				int status = 0;
-+				struct usb_iso_packet_descriptor *d;
-+
-+				d = urb->iso_frame_desc + qh->iso_idx;
-+
-+				if (iso_err) {
-+					status = -EILSEQ;
-+					urb->error_count++;
-+				}
-+				if (rx_count > d->length) {
-+					if (status == 0) {
-+						status = -EOVERFLOW;
-+						urb->error_count++;
-+					}
-+					DBG(2, "** OVERFLOW %d into %d\n",\
-+					    rx_count, d->length);
-+
-+					length = d->length;
-+				} else
-+					length = rx_count;
-+				d->status = status;
-+				buf = urb->transfer_dma + d->offset;
-+			} else {
-+				length = rx_count;
-+				buf = urb->transfer_dma +
-+						urb->actual_length;
-+			}
-+
- 			dma->desired_mode = 0;
- #ifdef USE_MODE1
- 			/* because of the issue below, mode 1 will
-@@ -1569,6 +1618,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 						urb->actual_length)
- 					> qh->maxpacket)
- 				dma->desired_mode = 1;
-+			if (rx_count < hw_ep->max_packet_sz_rx) {
-+				length = rx_count;
-+				dma->bDesiredMode = 0;
-+			} else {
-+				length = urb->transfer_buffer_length;
-+			}
- #endif
- 
- /* Disadvantage of using mode 1:
-@@ -1606,12 +1661,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 			 */
- 			ret = c->channel_program(
- 				dma, qh->maxpacket,
--				dma->desired_mode,
--				urb->transfer_dma
--					+ urb->actual_length,
--				(dma->desired_mode == 0)
--					? rx_count
--					: urb->transfer_buffer_length);
-+				dma->desired_mode, buf, length);
- 
- 			if (!ret) {
- 				c->channel_release(dma);
-@@ -1628,19 +1678,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 		}
- 	}
- 
--	if (dma && usb_pipeisoc(pipe)) {
--		struct usb_iso_packet_descriptor	*d;
--		int					iso_stat = status;
--
--		d = urb->iso_frame_desc + qh->iso_idx;
--		d->actual_length += xfer_len;
--		if (iso_err) {
--			iso_stat = -EILSEQ;
--			urb->error_count++;
--		}
--		d->status = iso_stat;
--	}
--
- finish:
- 	urb->actual_length += xfer_len;
- 	qh->offset += xfer_len;
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
-
diff --git a/packages/linux/linux-omap/musb-fix-endpoints.diff b/packages/linux/linux-omap/musb-fix-endpoints.diff
deleted file mode 100644
index 5d1201f014..0000000000
--- a/packages/linux/linux-omap/musb-fix-endpoints.diff
+++ /dev/null
@@ -1,197 +0,0 @@
-From: Ajay Kumar Gupta <ajay.gupta@ti.com>
-To: linux-usb@vger.kernel.org
-Cc: linux-omap@vger.kernel.org, david-b@pacbell.net, me@felipebalbi.com,
-        Ajay Kumar Gupta <ajay.gupta@ti.com>
-Subject: [PATCH] MUSB: BULK request on different available endpoints
-Date: 	Tue,  7 Oct 2008 11:12:24 +0530
-
-Fixes co-working issue of usb serial device with usb/net devices while
-oter endpoints are free and can be used.This patch implements the policy
-that if endpoint resources are available then different BULK request goes
-to different endpoint otherwise they are multiplexed to one reserved
-endpoint as currently done.
-
-NAK limit scheme has to be added for multiplexed BULK request scenario
-to avoid endpoint starvation due to usb/net devices.
-
-musb->periodic[] flag setting is also updated.It use to set this flag for
-an endpoint even when only rx or tx is used.Now flag setting is done on
-rx/tx basis of an endpoint.
-
-Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
----
- drivers/usb/musb/musb_host.c |   94 ++++++++++++++++++++++++------------------
- drivers/usb/musb/musb_host.h |    1 +
- 2 files changed, 55 insertions(+), 40 deletions(-)
- 
---- /tmp/musb_host.c	2008-10-07 10:10:49.000000000 +0200
-+++ git/drivers/usb/musb/musb_host.c	2008-10-07 10:13:59.000000000 +0200
-@@ -378,27 +378,32 @@
- 
- 		switch (qh->type) {
- 
-+		case USB_ENDPOINT_XFER_CONTROL:
-+		case USB_ENDPOINT_XFER_BULK:
-+			/* fifo policy for these lists, except that NAKing
-+			 * should rotate a qh to the end (for fairness).
-+			 */
-+			if (qh->mux == 1) {
-+				head = qh->ring.prev;
-+				list_del(&qh->ring);
-+				kfree(qh);
-+				qh = first_qh(head);
-+				break;
-+			}
- 		case USB_ENDPOINT_XFER_ISOC:
- 		case USB_ENDPOINT_XFER_INT:
- 			/* this is where periodic bandwidth should be
- 			 * de-allocated if it's tracked and allocated;
- 			 * and where we'd update the schedule tree...
- 			 */
--			musb->periodic[ep->epnum] = NULL;
-+			if (is_in)
-+				musb->periodic[2 * ep->epnum - 2] = NULL;
-+			else
-+				musb->periodic[2 * ep->epnum - 1] = NULL;
- 			kfree(qh);
- 			qh = NULL;
- 			break;
- 
--		case USB_ENDPOINT_XFER_CONTROL:
--		case USB_ENDPOINT_XFER_BULK:
--			/* fifo policy for these lists, except that NAKing
--			 * should rotate a qh to the end (for fairness).
--			 */
--			head = qh->ring.prev;
--			list_del(&qh->ring);
--			kfree(qh);
--			qh = first_qh(head);
--			break;
- 		}
- 	}
- 	return qh;
-@@ -1728,22 +1733,9 @@
- 	u16 			maxpacket;
- 
- 	/* use fixed hardware for control and bulk */
--	switch (qh->type) {
--	case USB_ENDPOINT_XFER_CONTROL:
-+	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
- 		head = &musb->control;
- 		hw_ep = musb->control_ep;
--		break;
--	case USB_ENDPOINT_XFER_BULK:
--		hw_ep = musb->bulk_ep;
--		if (is_in)
--			head = &musb->in_bulk;
--		else
--			head = &musb->out_bulk;
--		break;
--	}
--	if (head) {
--		idle = list_empty(head);
--		list_add_tail(&qh->ring, head);
- 		goto success;
- 	}
- 
-@@ -1778,7 +1770,8 @@
- 	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
- 		int	diff;
- 
--		if (musb->periodic[epnum])
-+		if ((is_in && musb->periodic[2 * epnum - 2]) ||
-+			(!is_in && musb->periodic[2 * epnum - 1]))
- 			continue;
- 		hw_ep = &musb->endpoints[epnum];
- 		if (hw_ep == musb->bulk_ep)
-@@ -1789,19 +1782,36 @@
- 		else
- 			diff = hw_ep->max_packet_sz_tx - maxpacket;
- 
--		if (diff > 0 && best_diff > diff) {
-+		if (diff >= 0 && best_diff > diff) {
- 			best_diff = diff;
- 			best_end = epnum;
- 		}
- 	}
--	if (best_end < 0)
-+	/* use bulk reserved ep1 if no other ep is free*/
-+	if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
-+		hw_ep = musb->bulk_ep;
-+		if (is_in)
-+			head = &musb->in_bulk;
-+		else
-+			head = &musb->out_bulk;
-+		goto success;
-+	} else if (best_end < 0)
- 		return -ENOSPC;
- 
- 	idle = 1;
-+	qh->mux = 0;
- 	hw_ep = musb->endpoints + best_end;
--	musb->periodic[best_end] = qh;
--	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
-+	if (is_in)
-+		musb->periodic[2 * best_end - 2] = qh;
-+	else
-+		musb->periodic[2 * best_end - 1] = qh;
-+	DBG(4, "qh %p periodic slot %d%s\n", qh, best_end, is_in ? "Rx" : "Tx");
- success:
-+	if (head) {
-+		idle = list_empty(head);
-+		list_add_tail(&qh->ring, head);
-+		qh->mux = 1;
-+	}
- 	qh->hw_ep = hw_ep;
- 	qh->hep->hcpriv = qh;
- 	if (idle)
-@@ -2065,11 +2075,13 @@
- 			sched = &musb->control;
- 			break;
- 		case USB_ENDPOINT_XFER_BULK:
--			if (usb_pipein(urb->pipe))
--				sched = &musb->in_bulk;
--			else
--				sched = &musb->out_bulk;
--			break;
-+			if (qh->mux == 1) {
-+				if (usb_pipein(urb->pipe))
-+					sched = &musb->in_bulk;
-+				else
-+					sched = &musb->out_bulk;
-+				break;
-+			}
- 		default:
- 			/* REVISIT when we get a schedule tree, periodic
- 			 * transfers won't always be at the head of a
-@@ -2131,11 +2143,13 @@
- 		sched = &musb->control;
- 		break;
- 	case USB_ENDPOINT_XFER_BULK:
--		if (is_in)
--			sched = &musb->in_bulk;
--		else
--			sched = &musb->out_bulk;
--		break;
-+		if (qh->mux == 1) {
-+			if (is_in)
-+				sched = &musb->in_bulk;
-+			else
-+				sched = &musb->out_bulk;
-+			break;
-+		}
- 	case USB_ENDPOINT_XFER_ISOC:
- 	case USB_ENDPOINT_XFER_INT:
- 		for (i = 0; i < musb->nr_endpoints; i++) {
---- /tmp/musb_host.h	2008-10-07 08:59:38.000000000 +0200
-+++ git/drivers/usb/musb/musb_host.h	2008-10-07 10:10:54.000000000 +0200
-@@ -53,7 +53,8 @@
- 
- 	struct list_head	ring;		/* of musb_qh */
- 	/* struct musb_qh		*next; */	/* for periodic tree */
--
-+	u8          mux;        /* qh multiplexed to hw_ep */
-+	
- 	unsigned		offset;		/* in urb->transfer_buffer */
- 	unsigned		segsize;	/* current xfer fragment */
- 
diff --git a/packages/linux/linux-omap/musb-fix-multiple-bulk-transfers.diff b/packages/linux/linux-omap/musb-fix-multiple-bulk-transfers.diff
deleted file mode 100644
index 7435a2e413..0000000000
--- a/packages/linux/linux-omap/musb-fix-multiple-bulk-transfers.diff
+++ /dev/null
@@ -1,194 +0,0 @@
-From: Ajay Kumar Gupta <ajay.gupta@ti.com>
-To: linux-usb@vger.kernel.org
-Cc: linux-omap@vger.kernel.org, felipe.balbi@nokia.com,
-Subject: [PATCH] MUSB: Fix for kernel panic with multiple bulk transfer
-Date: 	Wed,  1 Oct 2008 13:08:56 +0530
-
-Fixes kernel panic when multiple copy is performed among more than two mass
-storage media and transfer is aborted.musb_advance_schedule(),
-musb_urb_dequeue(),musb_cleanup_urb() and musb_h_disable() functions have
-been modified to correct urb handling associated with bulk and control
-endpoints which are multiplexed on one hardware endpoint.
-
-musb_advance_schedule() has been removed from musb_cleanup_urb() and added
-to musb_urb_dequeue(). musb_h_disable() has been modified to take care of
-multiple qh on same hw_ep scenario.
-
-Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
-CC: Romit Dasgupta <romit@ti.com> 
----
-Suggestions welcome to move while loop doing kfree(qh) from 
-musb_advance_schedule() and musb_h_disable() to musb_giveback().
-
- drivers/usb/musb/musb_host.c |  105 ++++++++++++++++++++++++++++++-----------
- 1 files changed, 77 insertions(+), 28 deletions(-)
-
-diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
-index 8b4be01..c2474de 100644
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -427,8 +427,17 @@ musb_advance_schedule(struct musb *musb, struct urb *urb,
- 		qh = musb_giveback(qh, urb, 0);
- 	else
- 		qh = musb_giveback(qh, urb, urb->status);
-+	while (qh && qh->is_ready && list_empty(&qh->hep->urb_list)) {
-+		struct list_head *head;
-+		head = qh->ring.prev;
-+		list_del(&qh->ring);
-+		qh->hep->hcpriv = NULL;
-+		kfree(qh);
-+		qh = first_qh(head);
-+	}
- 
--	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
-+
-+	if (qh && qh->is_ready) {
- 		DBG(4, "... next ep%d %cX urb %p\n",
- 				hw_ep->epnum, is_in ? 'R' : 'T',
- 				next_urb(qh));
-@@ -1964,8 +1973,6 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
- 		/* flush cpu writebuffer */
- 		csr = musb_readw(epio, MUSB_TXCSR);
- 	}
--	if (status == 0)
--		musb_advance_schedule(ep->musb, urb, ep, is_in);
- 	return status;
- }
- 
-@@ -2026,13 +2033,24 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
- 	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
- 	if (ret < 0 || (sched && qh != first_qh(sched))) {
- 		int	ready = qh->is_ready;
--
-+		int 	type = urb->pipe;
- 		ret = 0;
- 		qh->is_ready = 0;
- 		__musb_giveback(musb, urb, 0);
--		qh->is_ready = ready;
--	} else
-+
-+		if (list_empty(&qh->hep->urb_list) && list_empty(&qh->ring))
-+			list_del(&qh->ring);
-+		else
-+			qh->is_ready = ready;
-+		if (usb_pipeisoc(type))
-+			musb->periodic[qh->hw_ep->epnum] = NULL;
-+	} else {
- 		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
-+		if (!ret) {
-+			musb_advance_schedule(qh->hw_ep->musb, urb, qh->hw_ep,
-+					urb->pipe & USB_DIR_IN);
-+		}
-+	}
- done:
- 	spin_unlock_irqrestore(&musb->lock, flags);
- 	return ret;
-@@ -2046,14 +2064,17 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
- 	unsigned long		flags;
- 	struct musb		*musb = hcd_to_musb(hcd);
- 	u8			is_in = epnum & USB_DIR_IN;
--	struct musb_qh		*qh = hep->hcpriv;
-+	struct musb_qh		*qh, *qh_for_curr_urb;
- 	struct urb		*urb, *tmp;
- 	struct list_head	*sched;
--
--	if (!qh)
--		return;
-+	int			i;
- 
- 	spin_lock_irqsave(&musb->lock, flags);
-+	qh = hep->hcpriv;
-+	if (!qh) {
-+		spin_unlock_irqrestore(&musb->lock, flags);
-+		return;
-+	}
- 
- 	switch (qh->type) {
- 	case USB_ENDPOINT_XFER_CONTROL:
-@@ -2065,6 +2086,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
- 		else
- 			sched = &musb->out_bulk;
- 		break;
-+	case USB_ENDPOINT_XFER_ISOC:
-+	case USB_ENDPOINT_XFER_INT:
-+		for (i = 0; i < musb->nr_endpoints; i++) {
-+			if (musb->periodic[i] == qh)
-+				sched = &qh->ring;
-+			break;
-+		}
- 	default:
- 		/* REVISIT when we get a schedule tree, periodic transfers
- 		 * won't always be at the head of a singleton queue...
-@@ -2073,26 +2101,47 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
- 		break;
- 	}
- 
--	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
--
- 	/* kick first urb off the hardware, if needed */
--	qh->is_ready = 0;
--	if (!sched || qh == first_qh(sched)) {
-+	if (sched) {
-+		qh_for_curr_urb = qh;
- 		urb = next_urb(qh);
--
--		/* make software (then hardware) stop ASAP */
--		if (!urb->unlinked)
--			urb->status = -ESHUTDOWN;
--
--		/* cleanup */
--		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
--	} else
--		urb = NULL;
--
--	/* then just nuke all the others */
--	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
--		musb_giveback(qh, urb, -ESHUTDOWN);
--
-+		if (urb) {
-+			/* make software (then hardware) stop ASAP */
-+			if (!urb->unlinked)
-+				urb->status = -ESHUTDOWN;
-+			/* cleanup first urb of first qh; */
-+			if (qh == first_qh(sched)) {
-+				musb_cleanup_urb(urb, qh,
-+					urb->pipe & USB_DIR_IN);
-+			}
-+			qh = musb_giveback(qh, urb, -ESHUTDOWN);
-+			if (qh == qh_for_curr_urb) {
-+				list_for_each_entry_safe_from(urb, tmp,
-+					&hep->urb_list, urb_list) {
-+					qh = musb_giveback(qh, tmp, -ESHUTDOWN);
-+					if (qh != qh_for_curr_urb)
-+						break;
-+				}
-+			}
-+		}
-+		/* pick the next candidate and go */
-+		if (qh && qh->is_ready) {
-+			while (qh && qh->is_ready &&
-+				list_empty(&qh->hep->urb_list)) {
-+					struct list_head *head;
-+					head = qh->ring.prev;
-+					list_del(&qh->ring);
-+					qh->hep->hcpriv = NULL;
-+					kfree(qh);
-+					qh = first_qh(head);
-+			}
-+			if (qh && qh->is_ready) {
-+				epnum = qh->hep->desc.bEndpointAddress;
-+				is_in = epnum & USB_DIR_IN;
-+				musb_start_urb(musb, is_in, qh);
-+			}
-+		}
-+	}
- 	spin_unlock_irqrestore(&musb->lock, flags);
- }
- 
--- 
-1.5.6
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb
index c6c0dbb1a2..76bf666449 100644
--- a/packages/linux/linux-omap_git.bb
+++ b/packages/linux/linux-omap_git.bb
@@ -6,9 +6,9 @@ KERNEL_IMAGETYPE = "uImage"
 COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm"
 
 
-SRCREV = "5ecf98b76fa95078277c9037bb01640fd3de5e2c"
+SRCREV = "3b7de4be879f1f4f55ae59882a5cbd80f6dcf0f0"
 
-PV = "2.6.27+2.6.28-rc4+${PR}+gitr${SRCREV}"
+PV = "2.6.27+2.6.28-rc6+${PR}+gitr${SRCREV}"
 #PV = "2.6.27+${PR}+gitr${SRCREV}"
 PR = "r1"
 
@@ -20,7 +20,6 @@ SRC_URI_append = " \
            file://no-cortex-deadlock.patch;patch=1 \
            file://read_die_ids.patch;patch=1 \
            file://fix-install.patch;patch=1 \
-           file://musb-dma-iso-in.eml;patch=1 \
            file://musb-support-high-bandwidth.patch.eml;patch=1 \
            file://mru-fix-timings.diff;patch=1 \
            file://mru-fix-display-panning.diff;patch=1 \
@@ -29,8 +28,6 @@ SRC_URI_append = " \
            file://mru-improve-pixclock-config.diff;patch=1 \
            file://mru-make-video-timings-selectable.diff;patch=1 \
            file://mru-enable-overlay-optimalization.diff;patch=1 \
-           file://musb-fix-multiple-bulk-transfers.diff;patch=1 \
-           file://musb-fix-endpoints.diff;patch=1 \
            file://dvb-fix-dma.diff;patch=1 \
            file://0001-Removed-resolution-check-that-prevents-scaling-when.patch;patch=1 \
            file://0001-Implement-downsampling-with-debugs.patch;patch=1 \
@@ -43,8 +40,6 @@ SRC_URI_append = " \
            file://0009-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch;patch=1 \
            file://0010-DSS-Support-for-OMAP3-SDP-board.patch;patch=1 \
            file://0011-DSS-Support-for-OMAP3-EVM-board.patch;patch=1 \
-#           file://fix-asoc.diff;patch=1 \
-           file://fix-mmc.diff;patch=1 \
 		   http://www.bat.org/~tomba/git/0001-DSS-OMAPFB-Check-that-var-pixclock-is-not-zero.patch;patch=1 \
 "
 
@@ -54,7 +49,6 @@ SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \
 
 SRC_URI_append_omap3evm = " \
 	file://evm-mcspi-ts.diff;patch=1 \
-#	file://omap3evm-lcd-redtint.diff;patch=1 \
 "
 
 S = "${WORKDIR}/git"