linux-openzaurus-2.6.18+git: Attempt to update tosa patches to 2.6.19-rc4 - untested

10 files changed, 3564 insertions, 8 deletions

diff --git a/packages/linux/linux-openzaurus-2.6.18+git/sharpsl-pm-postresume-r1.patch b/packages/linux/linux-openzaurus-2.6.18+git/sharpsl-pm-postresume-r1.patch
new file mode 100644
index 0000000000..409daf03e6
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/sharpsl-pm-postresume-r1.patch
@@ -0,0 +1,30 @@
+ arch/arm/common/sharpsl_pm.c          |    3 +++
+ include/asm-arm/hardware/sharpsl_pm.h |    1 +
+ 2 files changed, 4 insertions(+)
+
+Index: git/include/asm-arm/hardware/sharpsl_pm.h
+===================================================================
+--- git.orig/include/asm-arm/hardware/sharpsl_pm.h	2006-10-31 16:09:33.000000000 +0000
++++ git/include/asm-arm/hardware/sharpsl_pm.h	2006-11-07 22:08:41.000000000 +0000
+@@ -26,6 +26,7 @@ struct sharpsl_charger_machinfo {
+ 	void (*presuspend)(void);
+ 	void (*postsuspend)(void);
+ 	void (*earlyresume)(void);
++	void (*postresume)(void);
+ 	unsigned long (*read_devdata)(int);
+ #define SHARPSL_BATT_VOLT       1
+ #define SHARPSL_BATT_TEMP       2
+Index: git/arch/arm/common/sharpsl_pm.c
+===================================================================
+--- git.orig/arch/arm/common/sharpsl_pm.c	2006-11-07 22:03:48.000000000 +0000
++++ git/arch/arm/common/sharpsl_pm.c	2006-11-07 22:04:20.000000000 +0000
+@@ -584,6 +584,9 @@ static int corgi_pxa_pm_enter(suspend_st
+ 	if (sharpsl_pm.machinfo->earlyresume)
+ 		sharpsl_pm.machinfo->earlyresume();
+ 
++	if (sharpsl_pm.machinfo->postresume)
++		sharpsl_pm.machinfo->postresume();
++	
+ 	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+ 
+ 	return 0;
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/tmio-nand-r7.patch b/packages/linux/linux-openzaurus-2.6.18+git/tmio-nand-r7.patch
new file mode 100644
index 0000000000..b6ce56eea4
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/tmio-nand-r7.patch
@@ -0,0 +1,593 @@
+ drivers/mtd/nand/Kconfig  |    7 
+ drivers/mtd/nand/Makefile |    1 
+ drivers/mtd/nand/tmio.c   |  554 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 562 insertions(+)
+
+Index: git/drivers/mtd/nand/tmio.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/drivers/mtd/nand/tmio.c	2006-11-07 23:31:12.000000000 +0000
+@@ -0,0 +1,554 @@
++/*
++ * A device driver for NAND flash connected to a Toshiba Mobile IO
++ * controller. This is known to work with the following variants:
++ *	TC6393XB revision 3
++ *
++ * Maintainer: Chris Humbert <mahadri+mtd@drigon.com>
++ *
++ * Copyright (C) 2005 Chris Humbert
++ * Copyright (C) 2005 Dirk Opfer
++ * Copyright (C) 2004 SHARP
++ * Copyright (C) 2002 Lineo Japan, Inc.
++ * Copyright (C) Ian Molton and Sebastian Carlier
++ *
++ * Based on Sharp's NAND driver, sharp_sl_tc6393.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/wait.h>
++#include <linux/ioport.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++#include <asm/io.h>
++#include <asm/hardware/tmio.h>
++
++#include <linux/interrupt.h>
++
++#define mtd_printk(level, mtd, format, arg...)	\
++	printk (level "%s: " format, mtd->name, ## arg)
++#define mtd_warn(mtd, format, arg...)		\
++	mtd_printk (KERN_WARNING, mtd, format, ## arg)
++
++/*--------------------------------------------------------------------------*/
++
++/* tmio_nfcr.mode Register Command List */
++#define FCR_MODE_DATA		0x94	// Data Data_Mode
++#define FCR_MODE_COMMAND	0x95	// Data Command_Mode
++#define FCR_MODE_ADDRESS	0x96	// Data Address_Mode
++
++#define FCR_MODE_HWECC_CALC	0xB4	// HW-ECC Data
++#define FCR_MODE_HWECC_RESULT	0xD4	// HW-ECC Calculation Result Read_Mode
++#define FCR_MODE_HWECC_RESET	0xF4	// HW-ECC Reset
++
++#define FCR_MODE_POWER_ON	0x0C	// Power Supply ON  to SSFDC card
++#define FCR_MODE_POWER_OFF	0x08	// Power Supply OFF to SSFDC card
++
++#define FCR_MODE_LED_OFF	0x00	// LED OFF
++#define FCR_MODE_LED_ON		0x04	// LED ON
++
++#define FCR_MODE_EJECT_ON	0x68	// Ejection Demand from Penguin is Advanced
++#define FCR_MODE_EJECT_OFF	0x08	// Ejection Demand from Penguin is Not Advanced
++
++#define FCR_MODE_LOCK		0x6C	// Operates By Lock_Mode. Ejection Switch is Invalid
++#define FCR_MODE_UNLOCK		0x0C	// Operates By UnLock_Mode.Ejection Switch is Effective
++
++#define FCR_MODE_CONTROLLER_ID	0x40	// Controller ID Read
++#define FCR_MODE_STANDBY	0x00	// SSFDC card Changes Standby State
++
++#define FCR_MODE_WE		0x80
++#define FCR_MODE_ECC1		0x40
++#define FCR_MODE_ECC0		0x20
++#define FCR_MODE_CE		0x10
++#define FCR_MODE_PCNT1		0x08
++#define FCR_MODE_PCNT0		0x04
++#define FCR_MODE_ALE		0x02
++#define FCR_MODE_CLE		0x01
++
++#define FCR_STATUS_BUSY		0x80
++
++/*
++ * NAND Flash Host Controller Configuration Register
++ */
++struct tmio_nfhccr {
++	u8 x00[4];
++	u16	command;	/* 0x04 Command				*/
++	u8 x01[0x0a];
++	u16	base[2];	/* 0x10 NAND Flash Control Reg Base Addr*/
++	u8 x02[0x29];
++	u8	intp;		/* 0x3d Interrupt Pin			*/
++	u8 x03[0x0a];
++	u8	inte;		/* 0x48 Interrupt Enable		*/
++	u8 x04;
++	u8	ec;		/* 0x4a Event Control			*/
++	u8 x05;
++	u8	icc;		/* 0x4c Internal Clock Control		*/
++	u8 x06[0x0e];
++	u8	eccc;		/* 0x5b ECC Control			*/
++	u8 x07[4];
++	u8	nftc;		/* 0x60 NAND Flash Transaction Control	*/
++	u8	nfm;		/* 0x61 NAND Flash Monitor		*/
++	u8	nfpsc;		/* 0x62 NAND Flash Power Supply Control	*/
++	u8	nfdc;		/* 0x63 NAND Flash Detect Control	*/
++	u8 x08[0x9c];
++} __attribute__ ((packed));
++
++/*
++ * NAND Flash Control Register
++ */
++struct tmio_nfcr {
++union {
++	u8	u8;		/* 0x00 Data Register			*/
++	u16	u16;
++	u32	u32;
++} __attribute__ ((packed));
++	u8	mode;		/* 0x04 Mode Register			*/
++	u8	status;		/* 0x05 Status Register			*/
++	u8	isr;		/* 0x06 Interrupt Status Register	*/
++	u8	imr;		/* 0x07 Interrupt Mask Register		*/
++} __attribute__ ((packed));
++
++struct tmio_nand {
++	struct mtd_info			mtd;
++	struct nand_chip		chip;
++
++	struct tmio_nfhccr __iomem *	ccr;
++	struct tmio_nfcr __iomem *	fcr;
++
++	unsigned int			irq;
++
++	/* for tmio_nand_read_byte */
++	u8				read;
++	unsigned			read_good:1;
++};
++
++#define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
++
++/*--------------------------------------------------------------------------*/
++
++static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
++				   unsigned int ctrl)
++{
++	struct tmio_nand *tmio = mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *fcr = tmio->fcr;
++	struct nand_chip *chip = mtd->priv;
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++		u8 mode;
++
++		if (ctrl & NAND_NCE) {
++			mode = FCR_MODE_DATA;
++
++			if (ctrl & NAND_CLE)
++				mode |=  FCR_MODE_CLE;
++			else
++				mode &= ~FCR_MODE_CLE;
++
++			if (ctrl & NAND_ALE)
++				mode |=  FCR_MODE_ALE;
++			else
++				mode &= ~FCR_MODE_ALE;
++		} else {
++			mode = FCR_MODE_STANDBY;
++		}
++
++		iowrite8 (mode, &fcr->mode);
++		tmio->read_good = 0;
++	}
++
++	if (cmd != NAND_CMD_NONE)
++		writeb(cmd, chip->IO_ADDR_W);
++}
++
++static int tmio_nand_dev_ready (struct mtd_info* mtd)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++
++	return !(ioread8 (&fcr->status) & FCR_STATUS_BUSY);
++}
++
++static irqreturn_t tmio_irq (int irq, void *__tmio)
++{
++	struct tmio_nand*		tmio	= __tmio;
++	struct nand_chip*		this	= &tmio->chip;
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++
++	/* disable RDYREQ interrupt */
++	iowrite8 (0x00,	&fcr->imr);
++
++	if (unlikely (!waitqueue_active (&this->controller->wq)))
++		printk (KERN_WARNING TMIO_NAME_NAND ": spurious interrupt\n");
++
++	wake_up (&this->controller->wq);
++	return IRQ_HANDLED;
++}
++
++/*
++ * The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
++ * This interrupt is normally disabled, but for long operations like
++ * erase and write, we enable it to wake us up.  The irq handler
++ * disables the interrupt.
++ */
++static int
++tmio_nand_wait (struct mtd_info *mtd, struct nand_chip *this)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++	long				timeout;
++
++	/* enable RDYREQ interrupt */
++	iowrite8 (0x0f,	&fcr->isr);
++	iowrite8 (0x81,	&fcr->imr);
++
++	timeout = wait_event_timeout (this->controller->wq, tmio_nand_dev_ready (mtd),
++			msecs_to_jiffies (this->state == FL_ERASING ? 400 : 20));
++
++	if (unlikely (!tmio_nand_dev_ready (mtd))) {
++		iowrite8 (0x00,	&fcr->imr);
++		mtd_warn (mtd, "still busy with %s after %d ms\n",
++				this->state == FL_ERASING ? "erase" : "program",
++				this->state == FL_ERASING ? 400 : 20);
++
++	} else if (unlikely (!timeout)) {
++		iowrite8 (0x00,	&fcr->imr);
++		mtd_warn (mtd, "timeout waiting for interrupt\n");
++	}
++
++	this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
++	return this->read_byte (mtd);
++}
++
++/*
++ * The TMIO controller combines two 8-bit data bytes into one 16-bit
++ * word. This function separates them so nand_base.c works as expected,
++ * especially its NAND_CMD_READID routines.
++ *
++ * To prevent stale data from being read, tmio_nand_hwcontrol() clears
++ * tmio->read_good.
++ */
++static u_char tmio_nand_read_byte (struct mtd_info *mtd)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++	unsigned int			data;
++
++	if (tmio->read_good--)
++		return tmio->read;
++
++	data		= ioread16 (&fcr->u16);
++	tmio->read	= data >> 8;
++	return data;
++}
++
++/*
++ * The TMIO controller converts an 8-bit NAND interface to a 16-bit
++ * bus interface, so all data reads and writes must be 16-bit wide.
++ * Thus, we implement 16-bit versions of the read, write, and verify
++ * buffer functions.
++ */
++static void
++tmio_nand_write_buf (struct mtd_info *mtd, const u_char *buf, int len)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++
++	iowrite16_rep (&fcr->u16, buf, len >> 1);
++}
++
++static void tmio_nand_read_buf (struct mtd_info *mtd, u_char *buf, int len)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++
++	ioread16_rep (&fcr->u16, buf, len >> 1);
++}
++
++static int
++tmio_nand_verify_buf (struct mtd_info *mtd, const u_char *buf, int len)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++	u16*				p	= (u16*) buf;
++
++	for (len >>= 1; len; len--)
++		if (*(p++) != ioread16 (&fcr->u16))
++			return -EFAULT;
++	return 0;
++}
++
++static void tmio_nand_enable_hwecc (struct mtd_info* mtd, int mode)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++
++	iowrite8 (FCR_MODE_HWECC_RESET, &fcr->mode);
++	ioread8 (&fcr->u8);	/* dummy read */
++	iowrite8 (FCR_MODE_HWECC_CALC, &fcr->mode);
++}
++
++static int tmio_nand_calculate_ecc (struct mtd_info* mtd, const u_char* dat,
++							u_char* ecc_code)
++{
++	struct tmio_nand*		tmio	= mtd_to_tmio (mtd);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++	unsigned int			ecc;
++
++	iowrite8 (FCR_MODE_HWECC_RESULT, &fcr->mode);
++
++	ecc = ioread16 (&fcr->u16);
++	ecc_code[1] = ecc;	// 000-255 LP7-0
++	ecc_code[0] = ecc >> 8;	// 000-255 LP15-8
++	ecc = ioread16 (&fcr->u16);
++	ecc_code[2] = ecc;	// 000-255 CP5-0,11b
++	ecc_code[4] = ecc >> 8;	// 256-511 LP7-0
++	ecc = ioread16 (&fcr->u16);
++	ecc_code[3] = ecc;	// 256-511 LP15-8
++	ecc_code[5] = ecc >> 8;	// 256-511 CP5-0,11b
++
++	iowrite8 (FCR_MODE_DATA, &fcr->mode);
++	return 0;
++}
++
++static void tmio_hw_init (struct device *dev, struct tmio_nand *tmio)
++{
++	struct resource*		nfcr	= tmio_resource_control (dev);
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	struct tmio_nfhccr __iomem *	ccr	= tmio->ccr;
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++	unsigned long			base;
++
++	/* (89h) SMD Buffer ON By TC6393XB SystemConfig gpibfc1 */
++	tdev->ops->clock (dev, 1);
++	tdev->ops->function (dev, 1);
++
++	/* (4Ch) CLKRUN Enable    1st spcrunc */
++	iowrite8 (0x81,			&ccr->icc);
++
++	/* (10h)BaseAddress    0x1000 spba.spba2 */
++	base = nfcr->start - tdev->iomem->start;
++	iowrite16 (base,		ccr->base + 0);
++	iowrite16 (base >> 16,		ccr->base + 1);
++
++	/* (04h)Command Register I/O spcmd */
++	iowrite8 (0x02,			&ccr->command);
++
++	/* (62h) Power Supply Control ssmpwc */
++	/* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
++	iowrite8 (0x02,			&ccr->nfpsc);
++
++	/* (63h) Detect Control ssmdtc */
++	iowrite8 (0x02,			&ccr->nfdc);
++
++	/* Interrupt status register clear sintst */
++	iowrite8 (0x0f,			&fcr->isr);
++
++	/* After power supply, Media are reset smode */
++	iowrite8 (FCR_MODE_POWER_ON,	&fcr->mode);
++	iowrite8 (FCR_MODE_COMMAND,	&fcr->mode);
++	iowrite8 (NAND_CMD_RESET,	&fcr->u8);
++
++	/* Standby Mode smode */
++	iowrite8 (FCR_MODE_STANDBY,	&fcr->mode);
++
++	mdelay (5);
++}
++
++static void tmio_hw_stop (struct device *dev, struct tmio_nand *tmio)
++{
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	struct tmio_nfcr __iomem *	fcr	= tmio->fcr;
++
++	iowrite8 (FCR_MODE_POWER_OFF,	&fcr->mode);
++	tdev->ops->function (dev, 0);
++	tdev->ops->clock (dev, 0);
++}
++
++/*--------------------------------------------------------------------------*/
++
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probes[] = { "cmdlinepart", NULL };
++#endif
++
++static int tmio_probe (struct device *dev)
++{
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	struct tmio_nand_platform_data*	tnpd	= dev->platform_data;
++	struct resource*		ccr	= tmio_resource_config (dev);
++	struct resource*		fcr	= tmio_resource_control (dev);
++	struct resource*		irq	= tmio_resource_irq (dev);
++	struct tmio_nand*		tmio;
++	struct mtd_info*		mtd;
++	struct nand_chip*		this;
++	struct mtd_partition*		parts;
++	int				nbparts = 0;
++	int				retval;
++
++	if (!tnpd)
++		return -EINVAL;
++
++	retval = request_resource (tdev->iomem, ccr);
++	if (retval)
++		goto err_request_ccr;
++
++	retval = request_resource (tdev->iomem, fcr);
++	if (retval)
++		goto err_request_fcr;
++
++	tmio = kzalloc (sizeof *tmio, GFP_KERNEL);
++	if (!tmio) {
++		retval = -ENOMEM;
++		goto err_kzalloc;
++	}
++
++	dev_set_drvdata (dev, tmio);
++	mtd		= &tmio->mtd;
++	this		= &tmio->chip;
++	mtd->priv	= this;
++	mtd->name	= TMIO_NAME_NAND;
++
++	tmio->ccr = ioremap (ccr->start, ccr->end - ccr->start + 1);
++	if (!tmio->ccr) {
++		retval = -EIO;
++		goto err_iomap_ccr;
++	}
++
++	tmio->fcr = ioremap (fcr->start, fcr->end - fcr->start + 1);
++	if (!tmio->fcr) {
++		retval = -EIO;
++		goto err_iomap_fcr;
++	}
++
++	tmio_hw_init (dev, tmio);
++
++	/* Set address of NAND IO lines */
++	this->IO_ADDR_R		= tmio->fcr;
++	this->IO_ADDR_W		= tmio->fcr;
++
++	/* Set address of hardware control function */
++	this->cmd_ctrl		= tmio_nand_hwcontrol;
++	this->dev_ready		= tmio_nand_dev_ready;
++	this->read_byte		= tmio_nand_read_byte;
++	this->write_buf		= tmio_nand_write_buf;
++	this->read_buf		= tmio_nand_read_buf;
++	this->verify_buf	= tmio_nand_verify_buf;
++
++	/* set eccmode using hardware ECC */
++	this->ecc.mode		= NAND_ECC_HW;
++	this->ecc.size 		= 512;
++	this->ecc.bytes 	= 6;
++	this->ecc.hwctl		= tmio_nand_enable_hwecc;
++	this->ecc.calculate	= tmio_nand_calculate_ecc;
++	this->ecc.correct	= nand_correct_data;
++	this->badblock_pattern	= tnpd->badblock_pattern;
++
++	/* 15 us command delay time */
++	this->chip_delay	= 15;
++
++	if (irq->start) {
++		retval = request_irq (irq->start, &tmio_irq,
++					SA_INTERRUPT, irq->name, tmio);
++		if (!retval) {
++			tmio->irq	= irq->start;
++			this->waitfunc	= tmio_nand_wait;
++		} else
++			mtd_warn (mtd, "request_irq error %d\n", retval);
++	}
++
++	/* Scan to find existence of the device */
++	if (nand_scan (mtd, 1)) {
++		retval = -ENODEV;
++		goto err_scan;
++	}
++
++	/* Register the partitions */
++#ifdef CONFIG_MTD_PARTITIONS
++	nbparts = parse_mtd_partitions (mtd, part_probes, &parts, 0);
++#endif
++	if (nbparts <= 0) {
++		parts	= tnpd->partition;
++		nbparts	= tnpd->num_partitions;
++	}
++
++	add_mtd_partitions (mtd, parts, nbparts);
++	return 0;
++
++err_scan:
++	if (tmio->irq)
++		free_irq (tmio->irq, tmio);
++	tmio_hw_stop (dev, tmio);
++	iounmap (tmio->fcr);
++err_iomap_fcr:
++	iounmap (tmio->ccr);
++err_iomap_ccr:
++	kfree (tmio);
++err_kzalloc:
++	release_resource (fcr);
++err_request_fcr:
++	release_resource (ccr);
++err_request_ccr:
++	return retval;
++}
++
++static int tmio_remove (struct device *dev)
++{
++	struct tmio_nand*		tmio	= dev_get_drvdata (dev);
++
++	nand_release (&tmio->mtd);
++	if (tmio->irq)
++		free_irq (tmio->irq, tmio);
++	tmio_hw_stop (dev, tmio);
++	iounmap (tmio->fcr);
++	iounmap (tmio->ccr);
++	kfree (tmio);
++	release_resource (tmio_resource_control (dev));
++	release_resource (tmio_resource_config (dev));
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int tmio_suspend (struct device *dev, pm_message_t state)
++{
++	tmio_hw_stop (dev, dev_get_drvdata (dev));
++	return 0;
++}
++
++static int tmio_resume (struct device *dev)
++{
++	tmio_hw_init (dev, dev_get_drvdata (dev));
++	return 0;
++}
++#endif
++
++static struct device_driver tmio_driver = {
++	.name		= TMIO_NAME_NAND,
++	.bus		= &tmio_bus_type,
++	.probe		= tmio_probe,
++	.remove		= tmio_remove,
++#ifdef CONFIG_PM
++	.suspend	= tmio_suspend,
++	.resume		= tmio_resume,
++#endif
++};
++
++static int __init tmio_init (void) {
++	return driver_register (&tmio_driver);
++}
++
++static void __exit tmio_exit (void) {
++	driver_unregister (&tmio_driver);
++}
++
++module_init (tmio_init);
++module_exit (tmio_exit);
++
++MODULE_LICENSE ("GPL");
++MODULE_AUTHOR ("Dirk Opfer, Chris Humbert");
++MODULE_DESCRIPTION ("NAND flash driver on Toshiba Mobile IO controller");
+Index: git/drivers/mtd/nand/Kconfig
+===================================================================
+--- git.orig/drivers/mtd/nand/Kconfig	2006-10-31 16:09:03.000000000 +0000
++++ git/drivers/mtd/nand/Kconfig	2006-11-07 22:13:09.000000000 +0000
+@@ -63,6 +63,13 @@ config MTD_NAND_AMS_DELTA
+ 	help
+ 	  Support for NAND flash on Amstrad E3 (Delta).
+ 
++config MTD_NAND_TMIO
++	tristate "NAND Flash device on Toshiba Mobile IO Controller"
++	depends on MTD_NAND && TOSHIBA_TC6393XB
++	help
++	  Support for NAND flash connected to a Toshiba Mobile IO
++	  Controller in some PDAs, including the Sharp SL6000x.
++
+ config MTD_NAND_TOTO
+ 	tristate "NAND Flash device on TOTO board"
+ 	depends on ARCH_OMAP && MTD_NAND && BROKEN
+Index: git/drivers/mtd/nand/Makefile
+===================================================================
+--- git.orig/drivers/mtd/nand/Makefile	2006-10-31 16:09:03.000000000 +0000
++++ git/drivers/mtd/nand/Makefile	2006-11-07 22:13:09.000000000 +0000
+@@ -22,5 +22,6 @@ obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250
+ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
+ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
+ obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
++obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio.o
+ 
+ nand-objs = nand_base.o nand_bbt.o
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/tmio-ohci-r6.patch b/packages/linux/linux-openzaurus-2.6.18+git/tmio-ohci-r6.patch
new file mode 100644
index 0000000000..9fdd2962c9
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/tmio-ohci-r6.patch
@@ -0,0 +1,929 @@
+
+ drivers/usb/host/Kconfig     |    1 
+ drivers/usb/host/ohci-hcd.c  |    1 
+ drivers/usb/host/ohci-tmio.c |  894 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 896 insertions(+)
+
+Index: git/drivers/usb/host/ohci-tmio.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/drivers/usb/host/ohci-tmio.c	2006-11-07 21:48:33.000000000 +0000
+@@ -0,0 +1,894 @@
++/*
++ * OHCI HCD (Host Controller Driver) for USB.
++ *
++ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
++ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
++ * (C) Copyright 2002 Hewlett-Packard Company
++ *
++ * Bus glue for Toshiba Mobile IO (TMIO) Controller's OHCI core
++ * (C) Copyright 2005 Chris Humbert <mahadri-usb@drigon.com>
++ *
++ * This is known to work with the following variants:
++ *	TC6393XB revision 3	(32kB SRAM)
++ *
++ * The TMIO's OHCI core DMAs through a small internal buffer that
++ * is directly addressable by the CPU.  dma_declare_coherent_memory
++ * and DMA bounce buffers allow the higher-level OHCI host driver to
++ * work.  However, the dma API doesn't handle dma mapping failures
++ * well (dma_sg_map() is a prime example), so it is unusable.
++ *
++ * This HC pretends be a PIO-ish controller and uses the kernel's
++ * generic allocator for the entire SRAM.  Using the USB core's
++ * usb_operations, we provide hcd_buffer_alloc/free.  Using the OHCI's
++ * ohci_ops, we provide memory management for OHCI's TDs and EDs.  We
++ * internally queue a URB's TDs until enough dma memory is available
++ * to enqueue them with the HC.
++ *
++ * Written from sparse documentation from Toshiba and Sharp's driver
++ * for the 2.4 kernel,
++ *	usb-ohci-tc6393.c (C) Copyright 2004 Lineo Solutions, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/fs.h>
++#include <linux/mount.h>
++#include <linux/pagemap.h>
++#include <linux/init.h>
++#include <linux/namei.h>
++#include <linux/sched.h>
++
++#include <linux/genalloc.h>
++#include <asm/dma-mapping.h>		/* for consistent_sync()	*/
++#include <asm/hardware/tmio.h>
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * USB Host Controller Configuration Register
++ */
++struct tmio_uhccr {
++	u8 x00[8];
++	u8	revid;	/* 0x08 Revision ID				*/
++	u8 x01[7];
++	u16	basel;	/* 0x10 USB Control Register Base Address Low	*/
++	u16	baseh;	/* 0x12 USB Control Register Base Address High	*/
++	u8 x02[0x2c];
++	u8	ilme;	/* 0x40 Internal Local Memory Enable		*/
++	u8 x03[0x0b];
++	u16	pm;	/* 0x4c Power Management			*/
++	u8 x04[2];
++	u8	intc;	/* 0x50 INT Control				*/
++	u8 x05[3];
++	u16	lmw1l;	/* 0x54 Local Memory Window 1 LMADRS Low	*/
++	u16	lmw1h;	/* 0x56 Local Memory Window 1 LMADRS High	*/
++	u16	lmw1bl;	/* 0x58 Local Memory Window 1 Base Address Low	*/
++	u16	lmw1bh;	/* 0x5A Local Memory Window 1 Base Address High	*/
++	u16	lmw2l;	/* 0x5C Local Memory Window 2 LMADRS Low	*/
++	u16	lmw2h;	/* 0x5E Local Memory Window 2 LMADRS High	*/
++	u16	lmw2bl;	/* 0x60 Local Memory Window 2 Base Address Low	*/
++	u16	lmw2bh;	/* 0x62 Local Memory Window 2 Base Address High	*/
++	u8 x06[0x98];
++	u8	misc;	/* 0xFC MISC					*/
++	u8 x07[3];
++} __attribute__ ((packed));
++
++union tmio_uhccr_pm {
++	u16		raw;
++struct {
++	unsigned	gcken:1;	/* D0 */
++	unsigned	ckrnen:1;	/* D1 */
++	unsigned	uspw1:1;	/* D2 USB Port 1 Power Disable	*/
++	unsigned	uspw2:1;	/* D3 USB Port 2 Power Disable	*/
++	unsigned	x00:4;
++	unsigned	pmee:1;		/* D8 */
++	unsigned	x01:6;
++	unsigned	pmes:1;		/* D15 */
++} __attribute__ ((packed));
++} __attribute__ ((packed));
++
++/*-------------------------------------------------------------------------*/
++
++struct tmio_dma_pool {
++	struct device*		dev;
++	unsigned int		size;
++};
++
++struct tmio_hcd {
++	struct gen_pool*	poolp;
++	struct usb_operations	ops;
++	struct tmio_dma_pool	td_pool;
++	struct tmio_dma_pool	ed_pool;
++
++	struct tmio_uhccr __iomem *ccr;
++	void __iomem *		sram;
++	size_t			sram_len;
++};
++
++#define hcd_to_tmio(hcd)	((struct tmio_hcd*)(hcd_to_ohci (hcd) + 1))
++
++struct tmio_td {
++	void*		data;		/* td's data buffer		*/
++	void __iomem *	bounce;		/* dma bounce buffer		*/
++	dma_addr_t	dma;		/* bounce buffer dma address	*/
++	size_t		len;		/* bounce buffer length		*/
++	u32		info;		/* parameter for td_fill	*/
++};
++
++struct tmio_urb {
++	int		td_add;		/* next index to be added	*/
++	int		td_queue;	/* next index to be HC enqueued	*/
++
++	struct tmio_td	td [0];		/* private td data		*/
++};
++
++static inline struct tmio_urb *urb_to_turb (struct urb *urb)
++{
++	urb_priv_t* urb_priv = urb->hcpriv;
++	return (struct tmio_urb*)(urb_priv->td + urb_priv->length);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* gen_pool_alloc page allocator callback */
++static unsigned long tmio_pool_callback(struct gen_pool *poolp)
++{
++	return 0;
++}
++
++static inline void tmio_pool_destroy(struct tmio_hcd *tmio)
++{
++	struct gen_pool *poolp = tmio->poolp;
++
++	if (!poolp)
++		return;
++	if (poolp->h)
++		kfree(poolp->h);
++	kfree(poolp);
++	tmio->poolp = NULL;
++}
++
++/*-------------------------------------------------------------------------*/
++
++#define BOUNDED_XYL(x,y,ylen)	(((y) <= (x)) && ((x) < ((y)+(ylen))))
++#define BOUNDED_XYY(x,y1,y2)	(((y1) <= (x)) && ((x) < (y2)))
++
++static inline dma_addr_t tmio_virt_to_dma (struct usb_hcd *hcd, void *vaddr)
++{
++	struct resource* sram	= tmio_resource_mem (hcd->self.controller);
++	struct tmio_hcd* tmio	= hcd_to_tmio (hcd);
++
++	return BOUNDED_XYL (vaddr, tmio->sram, tmio->sram_len)
++			? sram->start + (vaddr - tmio->sram)
++			: ~0;
++}
++
++static inline void* tmio_dma_to_virt (struct usb_hcd *hcd, dma_addr_t handle)
++{
++	struct resource* sram	= tmio_resource_mem (hcd->self.controller);
++	struct tmio_hcd* tmio	= hcd_to_tmio (hcd);
++
++	return BOUNDED_XYY (handle, sram->start, sram->end + 1)
++			? tmio->sram + handle - sram->start
++			: NULL;
++}
++
++/*
++ * allocate dma-able memory in the device's internal sram
++ *
++ * The generic pool allocator's minimum chunk size is 32 bytes,
++ * which is the cache line size on the PXA255, so we don't need
++ * to do anything special for smaller requests.
++ */
++static inline void *tmio_dma_alloc (struct device *dev, size_t size,
++				dma_addr_t *handle, gfp_t mem_flags)
++{
++	struct usb_hcd*	 hcd	= dev_get_drvdata (dev);
++	struct tmio_hcd* tmio	= hcd_to_tmio (hcd);
++	void*		 virt	= (void*) gen_pool_alloc (tmio->poolp, size);
++
++	return (*handle = tmio_virt_to_dma (hcd, virt)) == ~0 ? NULL : virt;
++}
++
++static inline void tmio_dma_free (struct device *dev, size_t size,
++					void *cpu_addr, dma_addr_t handle)
++{
++	struct usb_hcd*		hcd	= dev_get_drvdata (dev);
++	struct tmio_hcd*	tmio	= hcd_to_tmio (hcd);
++	dma_addr_t		dma	= tmio_virt_to_dma (hcd, cpu_addr);
++
++	if (unlikely (dma == ~0)) {
++		dev_err (dev, "trying to free bad address 0x%p\n", cpu_addr);
++		return;
++	}
++
++	if (unlikely (handle != dma))
++		dev_err (dev, "dma address mismatch for 0x%p: %08x != %08x\n",
++				cpu_addr, handle, dma);
++
++	gen_pool_free (tmio->poolp, (unsigned long) cpu_addr, size);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void *tmio_dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
++							dma_addr_t *handle)
++{
++	struct tmio_dma_pool *tdp = (struct tmio_dma_pool*) pool;
++	return tmio_dma_alloc (tdp->dev, tdp->size, handle, mem_flags);
++}
++
++static void
++tmio_dma_pool_free (struct dma_pool *pool, void *vaddr, dma_addr_t addr)
++{
++	struct tmio_dma_pool *tdp = (struct tmio_dma_pool*) pool;
++	return tmio_dma_free (tdp->dev, tdp->size, vaddr, addr);
++}
++
++static void *tmio_buffer_alloc (struct usb_bus *bus, size_t size,
++				gfp_t mem_flags, dma_addr_t *dma)
++{
++	return tmio_dma_alloc (bus->controller, size, dma, mem_flags);
++}
++
++static void tmio_buffer_free (struct usb_bus *bus, size_t size,
++				void *addr, dma_addr_t dma)
++{
++	tmio_dma_free (bus->controller, size, addr, dma);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void tmio_hc_stop (struct usb_hcd *hcd)
++{
++	struct device*			dev	= hcd->self.controller;
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	struct tmio_hcd*		tmio	= hcd_to_tmio (hcd);
++	struct tmio_uhccr __iomem*	ccr	= tmio->ccr;
++	union tmio_uhccr_pm		pm	= {0};
++
++	pm.gcken	= 1;
++	pm.ckrnen	= 1;
++	pm.uspw1	= 1;
++	pm.uspw2	= 1;
++
++	iowrite8 (0,		&ccr->intc);
++	iowrite8 (0,		&ccr->ilme);
++	iowrite16(0,		&ccr->basel);
++	iowrite16(0,		&ccr->baseh);
++	iowrite16(pm.raw,	&ccr->pm);
++
++	tdev->ops->function (dev, 0);
++	tdev->ops->clock (dev, 0);
++}
++
++static void tmio_hc_start (struct usb_hcd *hcd)
++{
++	struct device*			dev	= hcd->self.controller;
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	struct tmio_hcd*		tmio	= hcd_to_tmio (hcd);
++	struct tmio_uhccr __iomem*	ccr	= tmio->ccr;
++	union tmio_uhccr_pm		pm	= {0};
++
++	pm.pmes		= 1;
++	pm.pmee		= 1;
++	pm.ckrnen	= 1;
++	pm.gcken	= 1;
++
++	tdev->ops->clock (dev, 1);
++	tdev->ops->function (dev, 1);
++
++	iowrite16(pm.raw,			&ccr->pm);
++	iowrite16(hcd->rsrc_start,		&ccr->basel);
++	iowrite16(hcd->rsrc_start >> 16,	&ccr->baseh);
++	iowrite8 (1,				&ccr->ilme);
++	iowrite8 (2,				&ccr->intc);
++
++	consistent_sync (tmio->sram, tmio->sram_len, DMA_BIDIRECTIONAL);
++
++	dev_info (dev, "revision %d @ 0x%08llx, irq %d\n",
++			ioread8 (&ccr->revid), hcd->rsrc_start, hcd->irq);
++}
++
++static void tmio_stop (struct usb_hcd *hcd)
++{
++	struct ohci_hcd*	ohci	= hcd_to_ohci (hcd);
++
++	/* NULL these so ohci_stop() doesn't try to free them */
++	ohci->hcca	= NULL;
++	ohci->td_cache	= NULL;
++	ohci->ed_cache	= NULL;
++
++	ohci_stop (hcd);
++	tmio_hc_stop (hcd);
++	tmio_pool_destroy (hcd_to_tmio (hcd));
++
++	/* We don't free the hcca because tmio_hc_stop() turns off
++	 * the sram and the memory allocation data is destroyed. */
++}
++
++static int tmio_start (struct usb_hcd *hcd)
++{
++	struct device*		dev	= hcd->self.controller;
++	struct ohci_hcd*	ohci	= hcd_to_ohci (hcd);
++	struct tmio_hcd*	tmio	= hcd_to_tmio (hcd);
++	int			retval;
++
++	tmio_hc_start (hcd);
++
++	tmio->poolp = gen_pool_create(0, fls(tmio->sram_len) - 1,
++						tmio_pool_callback, 0);
++	if (!tmio->poolp) {
++		retval = -ENOMEM;
++		goto err_gen_pool_create;
++	}
++
++	gen_pool_free (tmio->poolp, (unsigned long)(tmio->sram),
++							tmio->sram_len);
++
++	ohci->hcca = tmio_dma_alloc (dev, sizeof *ohci->hcca,
++					&ohci->hcca_dma, GFP_KERNEL);
++	if (!ohci->hcca) {
++		retval = -ENOMEM;
++		goto err_hcca_alloc;
++	}
++
++	/* for our dma_pool_alloc/free hooks */
++	ohci->td_cache = (struct dma_pool*) &tmio->td_pool;
++	ohci->ed_cache = (struct dma_pool*) &tmio->ed_pool;
++
++	if ((retval = ohci_init (ohci)) < 0)
++		goto err_ohci_init;
++
++	if ((retval = ohci_run (ohci)) < 0)
++		goto err_ohci_run;
++
++	return 0;
++
++err_ohci_run:
++	err ("can't start %s", hcd->self.bus_name);
++err_ohci_init:
++err_hcca_alloc:
++err_gen_pool_create:
++	tmio_stop (hcd);
++	return retval;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static inline void *tmio_urb_dma_to_virt(struct urb *urb, dma_addr_t dma)
++{
++	if (BOUNDED_XYL(dma, urb->transfer_dma, urb->transfer_buffer_length))
++		return urb->transfer_buffer	+ dma - urb->transfer_dma;
++
++	if (BOUNDED_XYL(dma, urb->setup_dma, sizeof (struct usb_ctrlrequest)))
++		return urb->setup_packet	+ dma - urb->setup_dma;
++
++	return NULL;
++}
++
++static struct tmio_td* tmio_td_find (struct td *td, int *index)
++{
++	struct urb*		urb		= td->urb;
++	urb_priv_t*		urb_priv	= urb->hcpriv;
++	struct tmio_urb*	turb		= urb_to_turb (urb);
++	int			i;
++
++	for (i=0; i < urb_priv->length; i++)
++		if (urb_priv->td[i] == td) {
++			*index = i;
++			return turb->td + i;
++		}
++
++	return NULL;
++}
++
++/*
++ * map the td's data to dma-able memory
++ *
++ * if this td transfers data,
++ *	sets tmtd->data		to the urb's data buffer
++ *	sets tmtd->dma		to dma-able memory
++ *	sets tmtd->bounce	to non-NULL if a bounce buffer is allocated
++ *	copies the urb's data buffer to the bounce buffer if necessary
++ */
++static int tmio_td_dma_map (struct ohci_hcd *ohci, struct urb *urb,
++				struct tmio_td *tmtd, int idx)
++{
++	struct usb_hcd*		hcd	= ohci_to_hcd (ohci);
++	struct device*		dev	= hcd->self.controller;
++	dma_addr_t		dma;
++
++	if (!tmtd->len)
++		return 0;
++
++	if (tmio_dma_to_virt (hcd, tmtd->dma))
++		return 0;
++
++	tmtd->data = tmio_urb_dma_to_virt (urb, tmtd->dma);
++	if (unlikely (!tmtd->data)) {
++		dev_err (dev, "TD has bad dma address 0x%08x\n", tmtd->dma);
++		return 0;
++	}
++
++	tmtd->bounce = tmio_dma_alloc (dev, tmtd->len, &dma, GFP_ATOMIC);
++	if (!tmtd->bounce)
++		return -ENOMEM;
++
++	if ((usb_pipecontrol (urb->pipe) && !idx) || usb_pipeout (urb->pipe)) {
++		consistent_sync (tmtd->bounce, tmtd->len, DMA_TO_DEVICE);
++		memcpy (tmtd->bounce, tmtd->data, tmtd->len);
++	} else
++		consistent_sync (tmtd->bounce, tmtd->len, DMA_FROM_DEVICE);
++
++	tmtd->dma = dma;
++	return 0;
++}
++
++/*
++ * unmaps the td's data from dma-able memory
++ *
++ * if a bounce buffer has been allocated,
++ * 	copy the bounce buffer to the urb's data buffer if necessary
++ * 	free the bounce buffer
++ */
++static void tmio_td_dma_unmap (struct ohci_hcd *ohci, struct td *td)
++{
++	struct device*	dev	= (ohci_to_hcd (ohci))->self.controller;
++	struct urb*	urb	= td->urb;
++	int		idx;
++	struct tmio_td*	tmtd	= tmio_td_find (td, &idx);
++
++	if (!tmtd->bounce)
++		return;
++
++	if (usb_pipein (urb->pipe) && (usb_pipecontrol (urb->pipe) ? idx : 1)) {
++		memcpy (tmtd->data, tmtd->bounce, tmtd->len);
++		consistent_sync (tmtd->data, tmtd->len, DMA_TO_DEVICE);
++	}
++
++	tmio_dma_free (dev, tmtd->len, tmtd->bounce, tmtd->dma);
++}
++
++static int tmio_urb_runqueue (struct ohci_hcd *ohci, struct urb *urb)
++{
++	struct tmio_urb*	turb	= urb_to_turb (urb);
++	urb_priv_t*		urb_priv= urb->hcpriv;
++	int			start	= turb->td_queue;
++	int			retval	= 0;
++	int			i;
++
++	for (i = start; i < turb->td_add; i = ++turb->td_queue) {
++		struct tmio_td *tmtd = turb->td + i;
++
++		if ((retval = tmio_td_dma_map (ohci, urb, tmtd, i)))
++			break;
++
++		td_fill (ohci, tmtd->info, tmtd->dma, tmtd->len, urb, i);
++	}
++
++	if (i <= start)
++		return retval;
++
++	/* kickstart the appropriate list */
++	wmb ();
++	switch (urb_priv->ed->type) {
++		case PIPE_BULK:
++			ohci_writel (ohci, OHCI_BLF, &ohci->regs->cmdstatus);
++			break;
++		case PIPE_CONTROL:
++			ohci_writel (ohci, OHCI_CLF, &ohci->regs->cmdstatus);
++			break;
++	}
++
++	return retval;
++}
++
++/*
++ * This needs to be called with ohci->lock held so the pending urb list
++ * isn't modified.
++ */
++static int tmio_ohci_runqueue (struct ohci_hcd *ohci)
++{
++	urb_priv_t*		priv;
++	int			retval	= 0;
++
++	list_for_each_entry_reverse (priv, &ohci->pending, pending)
++		if ((retval = tmio_urb_runqueue (ohci, priv->td[0]->urb)))
++			return retval;
++
++	return retval;
++}
++
++static void tmio_td_fill (struct ohci_hcd *ohci, u32 info,
++			dma_addr_t data, int len, struct urb *urb, int index)
++{
++	struct tmio_urb*	turb	= urb_to_turb (urb);
++	struct tmio_td*		tmtd	= turb->td + index;
++
++	tmtd->data	= NULL;
++	tmtd->bounce	= NULL;
++	tmtd->dma	= data;
++	tmtd->len	= len;
++	tmtd->info	= info;
++	turb->td_add	= index + 1;
++}
++
++static void
++tmio_td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
++{
++	tmio_td_dma_unmap (ohci, td);
++	td_done (ohci, urb, td);
++}
++
++const static struct ohci_ops tmio_ops = {
++	.dma_pool_alloc	= tmio_dma_pool_alloc,
++	.dma_pool_free	= tmio_dma_pool_free,
++	.td_fill	= tmio_td_fill,
++	.td_done	= tmio_td_done,
++};
++
++/*-------------------------------------------------------------------------*/
++
++static irqreturn_t tmio_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
++{
++	irqreturn_t		retval	= ohci_irq (hcd, ptregs);
++
++	if (retval == IRQ_HANDLED) {
++		struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
++		unsigned long flags;
++
++		spin_lock_irqsave(&ohci->lock, flags);
++		tmio_ohci_runqueue (ohci);
++		spin_unlock_irqrestore (&ohci->lock, flags);
++	}
++
++	return retval;
++}
++
++/*
++ * This is ohci_urb_enqueue with:
++ *	dma address sanitization for tmio_urb_dma_to_virt()
++ *	allocate extra space in urb_priv for our private data
++ *	initialize urb_priv->td[0]->urb for tmio_ohci_runqueue()
++ *	call tmio_ohci_runqueue() after submitting TDs
++ */
++static int tmio_urb_enqueue (
++	struct usb_hcd	*hcd,
++	struct usb_host_endpoint *ep,
++	struct urb	*urb,
++	gfp_t		mem_flags
++) {
++	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
++	struct ed	*ed;
++	urb_priv_t	*urb_priv;
++	unsigned int	pipe = urb->pipe;
++	int		i, size = 0;
++	unsigned long	flags;
++	int		retval = 0;
++
++#ifdef OHCI_VERBOSE_DEBUG
++	urb_print (urb, "SUB", usb_pipein (pipe));
++#endif
++
++	/* make sure we can convert dma offsets back to virtual addresses */
++	if (!tmio_dma_to_virt (hcd, urb->setup_dma))
++		urb->setup_dma		= 0;
++
++	if (!tmio_dma_to_virt (hcd, urb->transfer_dma))
++		urb->transfer_dma	= sizeof (struct usb_ctrlrequest);
++
++	/* every endpoint has a ed, locate and maybe (re)initialize it */
++	if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
++		return -ENOMEM;
++
++	/* for the private part of the URB we need the number of TDs (size) */
++	switch (ed->type) {
++		case PIPE_CONTROL:
++			/* td_submit_urb() doesn't yet handle these */
++			if (urb->transfer_buffer_length > 4096)
++				return -EMSGSIZE;
++
++			/* 1 TD for setup, 1 for ACK, plus ... */
++			size = 2;
++			/* FALLTHROUGH */
++		// case PIPE_INTERRUPT:
++		// case PIPE_BULK:
++		default:
++			/* one TD for every 4096 Bytes (can be upto 8K) */
++			size += urb->transfer_buffer_length / 4096;
++			/* ... and for any remaining bytes ... */
++			if ((urb->transfer_buffer_length % 4096) != 0)
++				size++;
++			/* ... and maybe a zero length packet to wrap it up */
++			if (size == 0)
++				size++;
++			else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
++				&& (urb->transfer_buffer_length
++					% usb_maxpacket (urb->dev, pipe,
++						usb_pipeout (pipe))) == 0)
++				size++;
++			break;
++		case PIPE_ISOCHRONOUS: /* number of packets from URB */
++			size = urb->number_of_packets;
++			break;
++	}
++
++	/* allocate the private part of the URB */
++	urb_priv = kzalloc (sizeof (urb_priv_t)
++				+ size * sizeof (struct td*)
++				+ sizeof (struct tmio_urb)
++				+ size * sizeof (struct tmio_td),
++				mem_flags);
++	if (!urb_priv)
++		return -ENOMEM;
++	INIT_LIST_HEAD (&urb_priv->pending);
++	urb_priv->length = size;
++	urb_priv->ed = ed;
++
++	/* allocate the TDs (deferring hash chain updates) */
++	for (i = 0; i < size; i++) {
++		urb_priv->td [i] = td_alloc (ohci, mem_flags);
++		if (!urb_priv->td [i]) {
++			urb_priv->length = i;
++			urb_free_priv (ohci, urb_priv);
++			return -ENOMEM;
++		}
++		urb_priv->td [i]->urb = urb;
++	}
++
++	spin_lock_irqsave (&ohci->lock, flags);
++
++	/* don't submit to a dead HC */
++	if (!HC_IS_RUNNING(hcd->state)) {
++		retval = -ENODEV;
++		goto fail;
++	}
++
++	/* in case of unlink-during-submit */
++	spin_lock (&urb->lock);
++	if (urb->status != -EINPROGRESS) {
++		spin_unlock (&urb->lock);
++		urb->hcpriv = urb_priv;
++		finish_urb (ohci, urb, NULL);
++		retval = 0;
++		goto fail;
++	}
++
++	/* schedule the ed if needed */
++	if (ed->state == ED_IDLE) {
++		retval = ed_schedule (ohci, ed);
++		if (retval < 0)
++			goto fail0;
++		if (ed->type == PIPE_ISOCHRONOUS) {
++			u16	frame = ohci_frame_no(ohci);
++
++			/* delay a few frames before the first TD */
++			frame += max_t (u16, 8, ed->interval);
++			frame &= ~(ed->interval - 1);
++			frame |= ed->branch;
++			urb->start_frame = frame;
++
++			/* yes, only URB_ISO_ASAP is supported, and
++			 * urb->start_frame is never used as input.
++			 */
++		}
++	} else if (ed->type == PIPE_ISOCHRONOUS)
++		urb->start_frame = ed->last_iso + ed->interval;
++
++	/* fill the TDs and link them to the ed; and
++	 * enable that part of the schedule, if needed
++	 * and update count of queued periodic urbs
++	 */
++	urb->hcpriv = urb_priv;
++	td_submit_urb (ohci, urb);
++	tmio_ohci_runqueue (ohci);
++
++fail0:
++	spin_unlock (&urb->lock);
++fail:
++	if (retval)
++		urb_free_priv (ohci, urb_priv);
++	spin_unlock_irqrestore (&ohci->lock, flags);
++	return retval;
++}
++
++static const struct hc_driver tmio_hc_driver = {
++	.description =		hcd_name,
++	.product_desc =		"TMIO OHCI USB Host Controller",
++	.hcd_priv_size =	sizeof (struct ohci_hcd)
++				+ sizeof (struct tmio_hcd),
++
++	/* generic hardware linkage */
++	.irq =			tmio_irq,
++	.flags =		HCD_USB11 | HCD_MEMORY,
++
++	/* basic lifecycle operations */
++	.start =		tmio_start,
++	.stop =			tmio_stop,
++
++	/* managing i/o requests and associated device resources */
++	.urb_enqueue =		tmio_urb_enqueue,
++	.urb_dequeue =		ohci_urb_dequeue,
++	.endpoint_disable =	ohci_endpoint_disable,
++
++	/* scheduling support */
++	.get_frame_number =	ohci_get_frame,
++
++	/* root hub support */
++	.hub_status_data =	ohci_hub_status_data,
++	.hub_control =		ohci_hub_control,
++#ifdef	CONFIG_PM
++	.bus_suspend =		ohci_bus_suspend,
++	.bus_resume =		ohci_bus_resume,
++#endif
++	.start_port_reset =	ohci_start_port_reset,
++};
++
++/*-------------------------------------------------------------------------*/
++
++/* configure so an HC device and id are always provided */
++/* always called with process context; sleeping is OK */
++
++/**
++ * tmio_probe - initialize TMIO-based HCDs
++ * Context: !in_interrupt()
++ *
++ * Allocates basic resources for this USB host controller, and
++ * then invokes the start() method for the HCD associated with it
++ * through the hotplug entry's driver_data.
++ */
++static int tmio_probe (struct device *dev)
++{
++	struct tmio_device*	tdev	= dev_to_tdev (dev);
++	struct resource*	config	= tmio_resource_config (dev);
++	struct resource*	regs	= tmio_resource_control (dev);
++	struct resource*	sram	= tmio_resource_mem (dev);
++	struct resource*	irq	= tmio_resource_irq (dev);
++	struct usb_operations*	ops;
++	struct tmio_hcd*	tmio;
++	struct ohci_hcd*	ohci;
++	struct usb_hcd*		hcd;
++	int			retval;
++
++	if (usb_disabled ())
++		return -ENODEV;
++
++	if (dev->dma_mask || dev->coherent_dma_mask) {
++		dev_err (dev, "DMA not supported\n");
++		return -ENODEV;
++	}
++
++	hcd = usb_create_hcd (&tmio_hc_driver, dev, dev->bus_id);
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto err_create_hcd;
++	}
++
++	tmio			= hcd_to_tmio (hcd);
++	tmio->td_pool.dev	= dev;
++	tmio->ed_pool.dev	= dev;
++	tmio->td_pool.size	= sizeof (struct td);
++	tmio->ed_pool.size	= sizeof (struct ed);
++	ohci			= hcd_to_ohci (hcd);
++	ohci_hcd_init (ohci);
++	ohci->ops		= &tmio_ops;
++
++	retval = request_resource (tdev->iomem, config);
++	if (retval)
++		goto err_request_config_resource;
++
++	retval = request_resource (tdev->iomem, regs);
++	if (retval)
++		goto err_request_regs_resource;
++
++	retval = request_resource (tdev->iomem, sram);
++	if (retval)
++		goto err_request_sram_resource;
++
++	hcd->rsrc_start	= regs->start;
++	hcd->rsrc_len	= regs->end - regs->start + 1;
++	tmio->sram_len	= sram->end - sram->start + 1;
++
++	tmio->ccr = ioremap (config->start, config->end - config->start + 1);
++	if (!tmio->ccr) {
++		retval = -ENOMEM;
++		goto err_ioremap_ccr;
++	}
++
++	hcd->regs = ioremap (hcd->rsrc_start, hcd->rsrc_len);
++	if (!hcd->regs) {
++		retval = -ENOMEM;
++		goto err_ioremap_regs;
++	}
++
++	tmio->sram = ioremap (sram->start, tmio->sram_len);
++	if (!tmio->sram) {
++		retval = -ENOMEM;
++		goto err_ioremap_sram;
++	}
++
++	/* drivers should use our coherent buffer allocator */
++	ops			= &tmio->ops;
++	memcpy (ops, hcd->self.op, sizeof *ops);
++	ops->buffer_alloc	= tmio_buffer_alloc;
++	ops->buffer_free	= tmio_buffer_free;
++	hcd->self.op		= ops;
++
++	retval = usb_add_hcd (hcd, irq->start, SA_INTERRUPT);
++	if (retval)
++		goto err_usb_add_hcd;
++
++	return 0;
++
++err_usb_add_hcd:
++	iounmap (tmio->sram);
++err_ioremap_sram:
++	iounmap (hcd->regs);
++err_ioremap_regs:
++	iounmap (tmio->ccr);
++err_ioremap_ccr:
++	release_resource (sram);
++err_request_sram_resource:
++	release_resource (regs);
++err_request_regs_resource:
++	release_resource (config);
++err_request_config_resource:
++	usb_put_hcd (hcd);
++err_create_hcd:
++	return retval;
++}
++
++/* may be called without controller electrically present */
++/* may be called with controller, bus, and devices active */
++
++/**
++ * tmio_remove - shutdown processing for TMIO-based HCDs
++ * @dev: USB Host Controller being removed
++ * Context: !in_interrupt()
++ *
++ * Reverses the effect of tmio_probe(), first invoking
++ * the HCD's stop() method.  It is always called from a thread
++ * context, normally "rmmod", "apmd", or something similar.
++ */
++static int tmio_remove (struct device *dev)
++{
++	struct usb_hcd*		hcd	= dev_get_drvdata (dev);
++	struct tmio_hcd*	tmio	= hcd_to_tmio (hcd);
++
++	usb_remove_hcd (hcd);
++	iounmap (tmio->sram);
++	iounmap (hcd->regs);
++	iounmap (tmio->ccr);
++	release_resource (tmio_resource_mem (dev));
++	release_resource (tmio_resource_control (dev));
++	release_resource (tmio_resource_config (dev));
++	usb_put_hcd (hcd);
++	return 0;
++}
++
++static struct device_driver tmio_ohci = {
++	.name		= TMIO_NAME_OHCI,
++	.bus		= &tmio_bus_type,
++	.probe		= tmio_probe,
++	.remove		= tmio_remove,
++};
++
++static int __init tmio_init (void)
++{
++	dbg (DRIVER_INFO " (%s)", TMIO_SOC_NAME);
++	dbg ("block sizes: ed %d td %d",
++			sizeof (struct ed), sizeof (struct td));
++
++	return driver_register (&tmio_ohci);
++}
++
++static void __exit tmio_exit (void)
++{
++	driver_unregister (&tmio_ohci);
++}
++
++module_init (tmio_init);
++module_exit (tmio_exit);
+Index: git/drivers/usb/host/Kconfig
+===================================================================
+--- git.orig/drivers/usb/host/Kconfig	2006-11-07 21:46:32.000000000 +0000
++++ git/drivers/usb/host/Kconfig	2006-11-07 21:48:38.000000000 +0000
+@@ -84,6 +84,7 @@ config USB_OHCI_HCD
+ 	depends on USB && USB_ARCH_HAS_OHCI
+ 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ 	select I2C if ARCH_PNX4008
++	select GENERIC_ALLOCATOR if TOSHIBA_TC6393XB
+ 	---help---
+ 	  The Open Host Controller Interface (OHCI) is a standard for accessing
+ 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
+Index: git/drivers/usb/host/ohci-hcd.c
+===================================================================
+--- git.orig/drivers/usb/host/ohci-hcd.c	2006-11-07 21:46:32.000000000 +0000
++++ git/drivers/usb/host/ohci-hcd.c	2006-11-07 21:48:33.000000000 +0000
+@@ -944,6 +944,7 @@ MODULE_LICENSE ("GPL");
+       || defined(CONFIG_ARCH_OMAP) \
+       || defined (CONFIG_ARCH_LH7A404) \
+       || defined (CONFIG_PXA27x) \
++      || defined (CONFIG_TOSHIBA_TC6393XB) \
+       || defined (CONFIG_ARCH_EP93XX) \
+       || defined (CONFIG_SOC_AU1X00) \
+       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/tmio-tc6393-r8.patch b/packages/linux/linux-openzaurus-2.6.18+git/tmio-tc6393-r8.patch
new file mode 100644
index 0000000000..2f1b47d783
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/tmio-tc6393-r8.patch
@@ -0,0 +1,800 @@
+ arch/arm/common/Kconfig         |    3 
+ arch/arm/common/Makefile        |    1 
+ arch/arm/common/tc6393xb.c      |  668 ++++++++++++++++++++++++++++++++++++++++
+ arch/arm/mach-pxa/Kconfig       |    1 
+ include/asm-arm/arch-pxa/irqs.h |   10 
+ include/asm-arm/hardware/tmio.h |   44 ++
+ 6 files changed, 727 insertions(+)
+
+Index: git/arch/arm/common/tc6393xb.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/arch/arm/common/tc6393xb.c	2006-11-07 22:14:49.000000000 +0000
+@@ -0,0 +1,668 @@
++/*
++ * Toshiba TC6393XB SoC support
++ *
++ * Maintainer: Chris Humbert <mahadri-kernel@drigon.com>
++ *
++ * Copyright (c) 2005-2006 Chris Humbert
++ * Copyright (c) 2005 Dirk Opfer
++ *
++ * Based on code written by Sharp/Lineo for 2.4 kernels
++ * Based on locomo.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/fb.h>
++
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach/irq.h>
++#include <asm/arch/irqs.h>
++#include <asm/hardware/tmio.h>
++
++#ifndef TMIO_SOC_TC6393XB
++#error "TC6393XB SoC not configured"
++#endif
++
++/*--------------------------------------------------------------------------*/
++
++/* cell ids must be 0-based because they are used as array indexes. */
++#define	TC6393_CELL_NAND	0
++#define TC6393_CELL_SD		1
++#define	TC6393_CELL_OHCI	2
++#define TC6393_CELL_SERIAL	3
++#define TC6393_CELL_LCD		4
++#define TC6393_NUM_CELLS	5
++
++#define TC6393_RESOURCE(_name, _start, _end, _flags)	\
++	{						\
++		.name		= _name,		\
++		.start		= _start,		\
++		.end		= _end,			\
++		.flags		= _flags,		\
++	}
++
++#define TC6393_MEM(name, start, size)	\
++	TC6393_RESOURCE(name, start, (start) + (size) - 1, IORESOURCE_MEM)
++
++#define TC6393_IRQ(name, irq)	\
++	TC6393_RESOURCE(name, irq, irq, IORESOURCE_IRQ)
++
++const static struct resource tc6393_NAND_resource[] = {
++	TC6393_MEM (TMIO_NAME_NAND,	0x000100,	0x100),
++	TC6393_MEM (TMIO_NAME_NAND,	0x001000,	0x008),
++	TC6393_MEM (TMIO_NAME_NAND,	0,		0),
++	TC6393_IRQ (TMIO_NAME_NAND,	IRQ_TC6393_NAND),
++};
++
++const static struct resource tc6393_SD_resource[] = {
++	TC6393_MEM (TMIO_NAME_SD,	0x000200,	0x100),
++	TC6393_MEM (TMIO_NAME_SD,	0x002000,	0x200),
++	TC6393_MEM (TMIO_NAME_SD,	0,		0),
++	TC6393_IRQ (TMIO_NAME_SD,	IRQ_TC6393_SD),
++};
++
++const static struct resource tc6393_OHCI_resource[] = {
++	TC6393_MEM (TMIO_NAME_OHCI,	0x000300,	0x100),
++	TC6393_MEM (TMIO_NAME_OHCI,	0x003000,	0x100),
++	TC6393_MEM (TMIO_NAME_OHCI,	0x010000,	32 * 1024),
++	TC6393_IRQ (TMIO_NAME_OHCI,	IRQ_TC6393_OHCI),
++};
++
++const static struct resource tc6393_SERIAL_resource[] = {
++	TC6393_MEM (TMIO_NAME_SERIAL,	0x000400,	0x100),
++	TC6393_MEM (TMIO_NAME_SERIAL,	0x004000,	0x100),
++	TC6393_MEM (TMIO_NAME_SERIAL,	0,		0),
++	TC6393_IRQ (TMIO_NAME_SERIAL,	IRQ_TC6393_SERIAL),
++};
++
++const static struct resource tc6393_LCD_resource[] = {
++	TC6393_MEM (TMIO_NAME_LCD,	0x000500,	0x100),
++	TC6393_MEM (TMIO_NAME_LCD,	0x005000,	0x200),
++	TC6393_MEM (TMIO_NAME_LCD,	0x100000,	1024 * 1024),
++	TC6393_IRQ (TMIO_NAME_LCD,	IRQ_TC6393_LCD),
++};
++
++#define TC6393_CELL(_NAME)						\
++	[TC6393_CELL_##_NAME] = {					\
++		.name		= TMIO_NAME_##_NAME,			\
++		.id		= TC6393_CELL_##_NAME,			\
++		.resource	= tc6393_##_NAME##_resource,		\
++		.num_resources	= ARRAY_SIZE (tc6393_##_NAME##_resource), \
++	}
++
++struct tc6393_cell {
++	const char*		name;
++	unsigned int		id;
++	const struct resource*	resource;
++	unsigned int		num_resources;
++};
++
++const static struct tc6393_cell tc6393_cell [TC6393_NUM_CELLS] = {
++	TC6393_CELL (NAND	),
++	TC6393_CELL (SD		),
++	TC6393_CELL (OHCI	),
++	TC6393_CELL (SERIAL	),
++	TC6393_CELL (LCD	),
++};
++
++/*--------------------------------------------------------------------------*/
++
++/*
++ * TC6393 System Configuration Register
++ */
++struct tc6393_scr {
++	u8 x00[8];
++	u8	revid;		/* 0x08 Revision ID			*/
++	u8 x01[0x47];
++	u8	isr;		/* 0x50 Interrupt Status		*/
++	u8 x02;
++	u8	imr;		/* 0x52 Interrupt Mask			*/
++	u8 x03;
++	u8	irr;		/* 0x54 Interrupt Routing		*/
++	u8 x04[0x0b];
++	u16	gper;		/* 0x60 GP Enable			*/
++	u8 x05[2];
++	u16	gpi_sr[2];	/* 0x64 GPI Status			*/
++	u16	gpi_imr[2];	/* 0x68 GPI INT Mask			*/
++	u16	gpi_eder[2];	/* 0x6c GPI Edge Detect Enable		*/
++	u16	gpi_lir[4];	/* 0x70 GPI Level Invert		*/
++	u16	gpo_dsr[2];	/* 0x78 GPO Data Set			*/
++	u16	gpo_doecr[2];	/* 0x7c GPO Data OE Control		*/
++	u16	gp_iarcr[2];	/* 0x80 GP Internal Active Reg Control	*/
++	u16	gp_iarlcr[2];	/* 0x84 GP Internal Active Reg Level Con*/
++	u8	gpi_bcr[4];	/* 0x88 GPI Buffer Control		*/
++	u16	gpa_iarcr;	/* 0x8c GPa Internal Active Reg Control	*/
++	u8 x06[2];
++	u16	gpa_iarlcr;	/* 0x90 GPa Internal Active Reg Level Co*/
++	u8 x07[2];
++	u16	gpa_bcr;	/* 0x94 GPa Buffer Control		*/
++	u8 x08[2];
++	u16	ccr;		/* 0x98 Clock Control			*/
++	u16	pll2cr;		/* 0x9a PLL2 Control			*/
++	u16	pll1cr[2];	/* 0x9c PLL1 Control			*/
++	u8	diarcr;		/* 0xa0 Device Internal Active Reg Contr*/
++	u8	dbocr;		/* 0xa1 Device Buffer Off Control	*/
++	u8 x09[0x3e];
++	u8	fer;		/* 0xe0 Function Enable			*/
++	u8 x10[3];
++	u16	mcr;		/* 0xe4 Mode Control			*/
++	u8 x11[0x14];
++	u8	config;		/* 0xfc Configuration Control		*/
++	u8 x12[2];
++	u8	debug;		/* 0xff Debug				*/
++} __attribute__ ((packed));
++
++union tc6393_scr_fer {
++	u8		raw;
++struct {
++	unsigned	usben:1;	/* D0	USB enable		*/
++	unsigned	lcdcven:1;	/* D1	polysylicon TFT enable	*/
++	unsigned	slcden:1;	/* D2	SLCD enable		*/
++} __attribute__ ((packed));
++} __attribute__ ((packed));
++
++union tc6393_scr_ccr {
++	u16		raw;
++struct {
++	unsigned	ck32ken:1;	/* D0	SD host clock enable	*/
++	unsigned	usbcken:1;	/* D1	USB host clock enable	*/
++	unsigned	x00:2;
++	unsigned	sharp:1;	/* D4	??? set in Sharp's code	*/
++	unsigned	x01:3;
++	enum {				disable	= 0,
++					m12MHz	= 1,
++					m24MHz	= 2,
++					m48MHz	= 3,
++	}		mclksel:3;	/* D10-D8  LCD controller clock	*/
++	unsigned	x02:1;
++	enum {				h24MHz	= 0,
++					h48MHz	= 1,
++	}		hclksel:2;	/* D13-D12 host bus clock	*/
++	unsigned	x03:2;
++} __attribute__ ((packed));
++} __attribute__ ((packed));
++
++/*--------------------------------------------------------------------------*/
++
++struct tc6393 {
++	spinlock_t		lock;	/* read-modify-write lock	*/
++	struct device*		dev;	/* TC6393 device		*/
++	struct tc6393_scr __iomem *scr;	/* system configuration reg	*/
++
++	struct resource		rscr;	/* system config reg resource	*/
++	struct resource*	iomem;	/* entire TC6393 iomem resource	*/
++	unsigned int		irq;	/* hardware cascade irq		*/
++
++	struct tmio_device	tdev [TC6393_NUM_CELLS];
++};
++
++/*--------------------------------------------------------------------------*/
++
++static u32 tc6393_ioread32 (const void __iomem *addr)
++{
++	return ((u32) ioread16 (addr)) | (((u32) ioread16 (addr + 2)) << 16);
++}
++
++static u32 tc6393_iowrite32 (u32 val, const void __iomem *addr)
++{
++	iowrite16 (val,		addr);
++	iowrite16 (val >> 16,	addr + 2);
++	return val;
++}
++
++u32 get_tc6393_gpio (struct device *dev)
++{
++	struct tc6393*			tc6393	= dev_get_drvdata (dev);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++
++	return tc6393_ioread32 (scr->gpo_dsr);
++}
++EXPORT_SYMBOL (get_tc6393_gpio);
++
++u32 set_tc6393_gpio (struct device *dev, u32 bits)
++{
++	struct tc6393*			tc6393	= dev_get_drvdata (dev);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	unsigned long			flags;
++	u32				dsr;
++
++	spin_lock_irqsave (&tc6393->lock, flags);
++	dsr = tc6393_ioread32 (scr->gpo_dsr) | bits;
++	tc6393_iowrite32 (dsr, scr->gpo_dsr);
++	spin_unlock_irqrestore (&tc6393->lock, flags);
++
++	return dsr;
++}
++EXPORT_SYMBOL (set_tc6393_gpio);
++
++u32 reset_tc6393_gpio (struct device *dev, u32 bits)
++{
++	struct tc6393*			tc6393	= dev_get_drvdata (dev);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	unsigned long			flags;
++	u32				dsr;
++
++	spin_lock_irqsave (&tc6393->lock, flags);
++	dsr = tc6393_ioread32 (scr->gpo_dsr) & ~bits;
++	tc6393_iowrite32 (dsr, scr->gpo_dsr);
++	spin_unlock_irqrestore (&tc6393->lock, flags);
++
++	return dsr;
++}
++EXPORT_SYMBOL (reset_tc6393_gpio);
++
++/*--------------------------------------------------------------------------*/
++
++static void
++tc6393_irq (unsigned int irq, struct irqdesc *desc)
++{
++	struct tc6393*			tc6393	= get_irq_chipdata (irq);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	unsigned int			isr;
++	unsigned int			bit;
++	unsigned int			i;
++
++	desc->chip->ack (irq);
++
++	while ((isr = ioread8(&scr->isr) & ~ioread8(&scr->imr)))
++		for (bit = 1, i = IRQ_TC6393_START; i <= IRQ_TC6393_LCD;
++								bit <<= 1, i++)
++			if (isr & bit)
++				desc_handle_irq (i, irq_desc + i);
++}
++
++static void tc6393_irq_ack (unsigned int irq)
++{
++}
++
++static void tc6393_irq_mask (unsigned int irq)
++{
++	struct tc6393*			tc6393	= get_irq_chipdata (irq);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	unsigned long			flags;
++
++	spin_lock_irqsave (&tc6393->lock, flags);
++	iowrite8 (ioread8 (&scr->imr) | (1 << (irq - IRQ_TC6393_START)),
++								&scr->imr);
++	spin_unlock_irqrestore (&tc6393->lock, flags);
++}
++
++static void tc6393_irq_unmask (unsigned int irq)
++{
++	struct tc6393*			tc6393	= get_irq_chipdata (irq);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	unsigned long			flags;
++
++	spin_lock_irqsave (&tc6393->lock, flags);
++	iowrite8 (ioread8 (&scr->imr) & ~(1 << (irq - IRQ_TC6393_START)),
++								&scr->imr);
++	spin_unlock_irqrestore (&tc6393->lock, flags);
++}
++
++static struct irqchip tc6393_chip = {
++	.ack	= tc6393_irq_ack,
++	.mask	= tc6393_irq_mask,
++	.unmask	= tc6393_irq_unmask,
++};
++
++static void tc6393_attach_irq (struct tc6393 *tc6393)
++{
++	unsigned int		irq;
++
++	for (irq = IRQ_TC6393_START; irq <= IRQ_TC6393_LCD; irq++) {
++		set_irq_chip	(irq, &tc6393_chip);
++		set_irq_chipdata(irq, tc6393);
++		set_irq_handler	(irq, do_edge_IRQ);
++		set_irq_flags	(irq, IRQF_VALID | IRQF_PROBE);
++	}
++
++	set_irq_type		(tc6393->irq, IRQT_FALLING);
++	set_irq_chipdata	(tc6393->irq, tc6393);
++	set_irq_chained_handler	(tc6393->irq, tc6393_irq);
++}
++
++static void tc6393_detach_irq (struct tc6393 *tc6393)
++{
++	unsigned int		irq;
++
++	set_irq_chained_handler	(tc6393->irq, NULL);
++	set_irq_chipdata	(tc6393->irq, NULL);
++
++	for (irq = IRQ_TC6393_START; irq <= IRQ_TC6393_LCD; irq++) {
++		set_irq_flags	(irq, 0);
++		set_irq_chip	(irq, NULL);
++		set_irq_chipdata(irq, NULL);
++	}
++}
++
++/*--------------------------------------------------------------------------*/
++
++static int tc6393_bus_match (struct device *dev, struct device_driver *drv)
++{
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	const struct tc6393_cell*	cell	= tdev->soc_data;
++
++	return !strcmp (cell->name, drv->name);
++}
++
++static int tc6393_bus_suspend (struct device *dev, pm_message_t state)
++{
++	struct device_driver*	drv	= dev->driver;
++	return drv && drv->suspend ? drv->suspend (dev, state) : 0;
++}
++
++static int tc6393_bus_resume (struct device *dev)
++{
++	struct device_driver*	drv	= dev->driver;
++	return drv && drv->resume ? drv->resume (dev) : 0;
++}
++
++struct bus_type tc6393_bus_type = {
++	.name		= TMIO_NAME_BUS,
++	.match		= tc6393_bus_match,
++	.suspend	= tc6393_bus_suspend,
++	.resume		= tc6393_bus_resume,
++};
++EXPORT_SYMBOL (tc6393_bus_type);
++
++/*--------------------------------------------------------------------------*/
++
++static void tc6393_cell_clock (struct device *dev, int enable)
++{
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	const struct tc6393_cell*	cell	= tdev->soc_data;
++	struct tc6393*			tc6393	= dev_get_drvdata (dev->parent);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	union tc6393_scr_ccr		ccr;
++	unsigned long			flags;
++
++	spin_lock_irqsave (&tc6393->lock, flags);
++	ccr.raw = ioread16 (&scr->ccr);
++
++	switch (cell->id) {
++		case TC6393_CELL_SD:	ccr.ck32ken	= enable;	break;
++		case TC6393_CELL_OHCI:	ccr.usbcken	= enable;	break;
++		case TC6393_CELL_LCD:
++			ccr.mclksel = enable ? m48MHz : disable;
++			break;
++	}
++
++	printk (KERN_DEBUG TMIO_NAME_CORE ": scr->ccr = %04x\n", ccr.raw);
++
++	iowrite16(ccr.raw, &scr->ccr);
++	spin_unlock_irqrestore (&tc6393->lock, flags);
++}
++
++static void tc6393_cell_function (struct device *dev, int enable)
++{
++	struct tmio_device*		tdev	= dev_to_tdev (dev);
++	const struct tc6393_cell*	cell	= tdev->soc_data;
++	struct tc6393*			tc6393	= dev_get_drvdata (dev->parent);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	union tc6393_scr_fer		fer;
++	unsigned long			flags;
++
++	if (cell->id == TC6393_CELL_NAND) {
++		if (enable) {
++			/* SMD buffer on */
++			printk (KERN_DEBUG TMIO_NAME_CORE ": SMD buffer on\n");
++			iowrite8 (0xff, scr->gpi_bcr + 1);
++		}
++		return;
++	}
++
++	spin_lock_irqsave (&tc6393->lock, flags);
++	fer.raw = ioread16 (&scr->fer);
++
++	switch (cell->id) {
++		case TC6393_CELL_OHCI:	fer.usben	= enable;	break;
++		case TC6393_CELL_LCD:	fer.slcden	= enable;	break;
++	}
++
++	printk (KERN_DEBUG TMIO_NAME_CORE ": scr->fer = %02x\n", fer.raw);
++
++	iowrite8 (fer.raw, &scr->fer);
++	spin_unlock_irqrestore (&tc6393->lock, flags);
++}
++
++static void
++tc6393_lcd_mode (struct device *dev, const struct fb_videomode *mode)
++{
++	struct tc6393*			tc6393	= dev_get_drvdata (dev->parent);
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++
++	iowrite16 (mode->pixclock,		scr->pll1cr + 0);
++	iowrite16 (mode->pixclock >> 16,	scr->pll1cr + 1);
++}
++
++static struct tmio_cell_ops tc6393_cell_ops = {
++	.clock		= tc6393_cell_clock,
++	.function	= tc6393_cell_function,
++	.lcd_mode	= tc6393_lcd_mode,
++};
++
++static void tc6393_device_release (struct device *dev)
++{
++}
++
++static int
++tc6393_device_register (struct tc6393 *tc6393, struct tmio_cell *tcell)
++{
++	const struct tc6393_cell*	cell;
++	struct tmio_device*		tdev;
++	struct device*			dev;
++	int				i;
++
++	for (i = 0; strcmp (tcell->name, tc6393_cell [i].name); )
++		if (++i >= ARRAY_SIZE(tc6393_cell))
++			return -EINVAL;
++
++	cell			= tc6393_cell  + i;
++	tdev			= tc6393->tdev + i;
++	dev			= &tdev->dev;
++
++	tdev->ops		= &tc6393_cell_ops;
++	tdev->iomem		= tc6393->iomem;
++	tdev->soc_data		= (void*) cell;
++
++	dev->parent		= tc6393->dev;
++	strncpy (dev->bus_id, cell->name, sizeof dev->bus_id);
++	dev->bus		= &tc6393_bus_type;
++	dev->dma_mask		= tc6393->dev->dma_mask;
++	dev->coherent_dma_mask	= tc6393->dev->coherent_dma_mask;
++	dev->release		= tc6393_device_release;
++	dev->platform_data	= tcell->platform_data;
++
++	for (i=0; i < cell->num_resources; i++) {
++		const struct resource*	cr	= cell->resource + i;
++		struct resource*	dr	= tdev->resource + i;
++
++		dr->name	= cr->name;
++		dr->start	= cr->start;
++		dr->end		= cr->end;
++		dr->flags	= cr->flags;
++
++		/* convert memory offsets to absolutes */
++		if (cr->flags & IORESOURCE_MEM) {
++			dr->start	+= tc6393->iomem->start;
++			dr->end		+= tc6393->iomem->start;
++		}
++	}
++
++	return device_register (dev);
++}
++
++/*--------------------------------------------------------------------------*/
++
++static void tc6393_hw_init (struct tc6393 *tc6393)
++{
++	struct tc6393_scr __iomem *	scr	= tc6393->scr;
++	struct tc6393_platform_data*	tcpd	= tc6393->dev->platform_data;
++
++	tcpd->enable (tc6393->dev);
++
++	iowrite8 (0,				&scr->fer);
++	iowrite16(tcpd->scr_pll2cr,		&scr->pll2cr);
++	iowrite16(tcpd->scr_ccr,		&scr->ccr);
++	iowrite16(tcpd->scr_mcr,		&scr->mcr);
++	iowrite16(tcpd->scr_gper,		&scr->gper);
++	iowrite8 (0,				&scr->irr);
++	iowrite8 (0xbf,				&scr->imr);
++	iowrite16(tcpd->scr_gpo_dsr,		scr->gpo_dsr + 0);
++	iowrite16(tcpd->scr_gpo_dsr >> 16,	scr->gpo_dsr + 1);
++	iowrite16(tcpd->scr_gpo_doecr,		scr->gpo_doecr + 0);
++	iowrite16(tcpd->scr_gpo_doecr >> 16,	scr->gpo_doecr + 1);
++}
++
++static int tc6393_probe (struct device *dev)
++{
++	struct platform_device*		pdev	= to_platform_device (dev);
++	struct tc6393_platform_data*	tcpd	= dev->platform_data;
++	struct tc6393*			tc6393;
++	struct resource*		iomem;
++	struct resource*		rscr;
++	int				retval;
++	int				i;
++
++	iomem = platform_get_resource (pdev, IORESOURCE_MEM, 0);
++	if (!iomem)
++		return -EINVAL;
++
++	tc6393 = kzalloc (sizeof *tc6393, GFP_KERNEL);
++	if (!tc6393) {
++		retval = -ENOMEM;
++		goto err_kzalloc;
++	}
++
++	dev_set_drvdata (dev, tc6393);
++	spin_lock_init (&tc6393->lock);
++	tc6393->dev	= dev;
++	tc6393->iomem	= iomem;
++	tc6393->irq	= platform_get_irq (pdev, 0);
++
++	rscr		= &tc6393->rscr;
++	rscr->name	= TMIO_NAME_CORE;
++	rscr->start	= iomem->start;
++	rscr->end	= iomem->start + 0xff;
++	rscr->flags	= IORESOURCE_MEM;
++
++	retval = request_resource (iomem, rscr);
++	if (retval)
++		goto err_request_scr;
++
++	tc6393->scr	= ioremap (rscr->start, rscr->end - rscr->start + 1);
++	if (!tc6393->scr) {
++		retval = -ENOMEM;
++		goto err_ioremap;
++	}
++
++	tc6393_hw_init (tc6393);
++
++	printk (KERN_INFO "Toshiba %s revision %d at 0x%08lx, irq %d\n",
++			TMIO_SOC_NAME, ioread8 (&tc6393->scr->revid),
++			iomem->start, tc6393->irq);
++
++	if (tc6393->irq)
++		tc6393_attach_irq (tc6393);
++
++	for (i = 0; i < tcpd->num_cells; i++)
++		tc6393_device_register (tc6393, tcpd->cell + i);
++
++	return 0;
++
++err_ioremap:
++	release_resource (rscr);
++err_request_scr:
++	kfree(tc6393);
++err_kzalloc:
++	release_resource (iomem);
++	return retval;
++}
++
++static int tc6393_dev_remove (struct device *dev, void *data)
++{
++	device_unregister (dev);
++	return 0;
++}
++
++static int tc6393_remove (struct device *dev)
++{
++	struct tc6393*		tc6393	= dev_get_drvdata (dev);
++
++	device_for_each_child (dev, tc6393, tc6393_dev_remove);
++
++	if (tc6393->irq)
++		tc6393_detach_irq (tc6393);
++
++	iounmap (tc6393->scr);
++	release_resource (&tc6393->rscr);
++	release_resource (tc6393->iomem);
++	kfree (tc6393);
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int tc6393_suspend (struct device *dev, pm_message_t state)
++{
++	struct tc6393_platform_data*	tcpd	= dev->platform_data;
++	tcpd->disable (dev);
++	return 0;
++}
++
++static int tc6393_resume (struct device *dev)
++{
++	struct tc6393*			tc6393	= dev_get_drvdata (dev);
++	tc6393_hw_init (tc6393);
++	return 0;
++}
++#endif
++
++static struct device_driver tc6393_device_driver = {
++	.name		= TMIO_SOC_NAME,
++	.bus		= &platform_bus_type,
++	.probe		= tc6393_probe,
++	.remove		= tc6393_remove,
++#ifdef CONFIG_PM
++	.suspend	= tc6393_suspend,
++	.resume		= tc6393_resume,
++#endif
++};
++
++/*--------------------------------------------------------------------------*/
++
++static int __init tc6393_init (void)
++{
++	int retval = bus_register (&tc6393_bus_type);
++	if (retval)
++		return retval;
++
++	return driver_register (&tc6393_device_driver);
++}
++
++static void __exit tc6393_exit (void)
++{
++	driver_unregister (&tc6393_device_driver);
++	bus_unregister (&tc6393_bus_type);
++}
++
++module_init (tc6393_init);
++module_exit (tc6393_exit);
++
++MODULE_DESCRIPTION ("TC6393 SoC bus driver");
++MODULE_AUTHOR ("Chris Humbert, Dirk Opfer");
++MODULE_LICENSE ("GPL");
+Index: git/arch/arm/common/Kconfig
+===================================================================
+--- git.orig/arch/arm/common/Kconfig	2006-10-31 16:08:28.000000000 +0000
++++ git/arch/arm/common/Kconfig	2006-11-07 22:13:09.000000000 +0000
+@@ -31,3 +31,6 @@ config SHARPSL_PM
+ 
+ config SHARP_SCOOP
+ 	bool
++
++config TOSHIBA_TC6393XB
++	bool
+Index: git/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- git.orig/arch/arm/mach-pxa/Kconfig	2006-11-07 22:13:06.000000000 +0000
++++ git/arch/arm/mach-pxa/Kconfig	2006-11-07 23:30:34.000000000 +0000
+@@ -128,6 +128,7 @@ config MACH_BORZOI
+ config MACH_TOSA
+ 	bool "Enable Sharp SL-6000x (Tosa) Support"
+ 	depends PXA_SHARPSL_25x
++	select TOSHIBA_TC6393XB
+ 
+ config PXA25x
+ 	bool
+Index: git/arch/arm/common/Makefile
+===================================================================
+--- git.orig/arch/arm/common/Makefile	2006-10-31 16:08:28.000000000 +0000
++++ git/arch/arm/common/Makefile	2006-11-07 22:13:09.000000000 +0000
+@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
+ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
+ obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
+ obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
++obj-$(CONFIG_TOSHIBA_TC6393XB)	+= tc6393xb.o
+Index: git/include/asm-arm/hardware/tmio.h
+===================================================================
+--- git.orig/include/asm-arm/hardware/tmio.h	2006-11-07 22:13:09.000000000 +0000
++++ git/include/asm-arm/hardware/tmio.h	2006-11-07 22:13:09.000000000 +0000
+@@ -91,6 +91,50 @@ struct tmio_device {
+ 
+ /*--------------------------------------------------------------------------*/
+ 
++/*
++ * TC6393XB SoC
++ */
++#ifdef CONFIG_TOSHIBA_TC6393XB
++#define TMIO_SOC_TC6393XB
++#define TMIO_SOC_NAME			"TC6393XB"
++#define TMIO_NAME_BUS			"tc6393-bus"
++#define TMIO_NAME_CORE			"tc6393-core"
++#define TMIO_NAME_NAND			"tc6393-nand"
++#define TMIO_NAME_SD			"tc6393-sd"
++#define TMIO_NAME_OHCI			"tc6393-ohci"
++#define TMIO_NAME_SERIAL		"tc6393-serial"
++#define TMIO_NAME_LCD			"tc6393-lcd"
++#define tmio_bus_type			tc6393_bus_type
++
++#define TC6393_GPIO(x)			(1 << (x))
++
++extern struct bus_type tc6393_bus_type;
++
++struct tc6393_platform_data {
++	u16	scr_pll2cr;		/* PLL2 Control			*/
++	u16	scr_ccr;		/* Clock Control		*/
++	u16	scr_mcr;		/* Mode Control			*/
++	u16	scr_gper;		/* GP Enable			*/
++	u32	scr_gpo_doecr;		/* GPO Data OE Control		*/
++	u32	scr_gpo_dsr;		/* GPO Data Set			*/
++
++	/* cells to register as devices */
++	struct tmio_cell*		cell;
++	unsigned int			num_cells;
++
++	/* callbacks to enable and disable the TC6393XB's power and clock */
++	void (*enable)	(struct device *dev);
++	void (*disable)	(struct device *dev);
++};
++
++u32	get_tc6393_gpio		(struct device *dev);
++u32	set_tc6393_gpio		(struct device *dev, u32 bits);
++u32	reset_tc6393_gpio	(struct device *dev, u32 bits);
++
++/*--------------------------------------------------------------------------*/
++
++#else
+ #error "no TMIO SoC configured"
++#endif
+ 
+ #endif
+Index: git/include/asm-arm/arch-pxa/irqs.h
+===================================================================
+--- git.orig/include/asm-arm/arch-pxa/irqs.h	2006-10-31 16:09:33.000000000 +0000
++++ git/include/asm-arm/arch-pxa/irqs.h	2006-11-07 22:13:09.000000000 +0000
+@@ -163,17 +163,27 @@
+ #define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+ #define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+ 
++#define IRQ_TC6393_START	(IRQ_BOARD_END)
++#define IRQ_TC6393_NAND		(IRQ_BOARD_END + 0)
++#define IRQ_TC6393_SD		(IRQ_BOARD_END + 1)
++#define IRQ_TC6393_OHCI		(IRQ_BOARD_END + 2)
++#define IRQ_TC6393_SERIAL	(IRQ_BOARD_END + 3)
++#define IRQ_TC6393_LCD		(IRQ_BOARD_END + 4)
++
+ /*
+  * Figure out the MAX IRQ number.
+  *
+  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+  * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
++ * If we have an TC6393XB, the max IRQ is IRQ_TC6393_LCD+1
+  * Otherwise, we have the standard IRQs only.
+  */
+ #ifdef CONFIG_SA1111
+ #define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+ #elif defined(CONFIG_SHARP_LOCOMO)
+ #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
++#elif defined(CONFIG_TOSHIBA_TC6393XB)
++#define NR_IRQS			(IRQ_TC6393_LCD + 1)
+ #elif defined(CONFIG_ARCH_LUBBOCK) || \
+       defined(CONFIG_MACH_LOGICPD_PXA270) || \
+       defined(CONFIG_MACH_MAINSTONE)
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/tosa-keyboard-r18.patch b/packages/linux/linux-openzaurus-2.6.18+git/tosa-keyboard-r18.patch
new file mode 100644
index 0000000000..00bac40db5
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/tosa-keyboard-r18.patch
@@ -0,0 +1,515 @@
+ drivers/input/keyboard/Kconfig   |   12 -
+ drivers/input/keyboard/Makefile  |    1 
+ drivers/input/keyboard/tosakbd.c |  467 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 479 insertions(+), 1 deletion(-)
+
+Index: git/drivers/input/keyboard/Kconfig
+===================================================================
+--- git.orig/drivers/input/keyboard/Kconfig	2006-10-31 16:08:57.000000000 +0000
++++ git/drivers/input/keyboard/Kconfig	2006-11-07 22:13:10.000000000 +0000
+@@ -148,12 +148,22 @@ config KEYBOARD_SPITZ
+ 	depends on PXA_SHARPSL
+ 	default y
+ 	help
+-	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
++    	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+ 	  SL-C3000 and Sl-C3100 series of PDAs.
+ 
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called spitzkbd.
+ 
++config KEYBOARD_TOSA
++	tristate "Tosa keyboard"
++	depends on PXA_SHARPSL
++	default y
++	help
++	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called tosakbd.
++
+ config KEYBOARD_AMIGA
+ 	tristate "Amiga keyboard"
+ 	depends on AMIGA
+Index: git/drivers/input/keyboard/Makefile
+===================================================================
+--- git.orig/drivers/input/keyboard/Makefile	2006-10-31 16:08:57.000000000 +0000
++++ git/drivers/input/keyboard/Makefile	2006-11-07 22:13:10.000000000 +0000
+@@ -17,4 +17,5 @@ obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkb
+ obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
+ obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+ obj-$(CONFIG_KEYBOARD_OMAP)             += omap-keypad.o
++obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
+ 
+Index: git/drivers/input/keyboard/tosakbd.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/drivers/input/keyboard/tosakbd.c	2006-11-07 23:27:19.000000000 +0000
+@@ -0,0 +1,467 @@
++/*
++ *  Keyboard driver for Sharp Tosa models (SL-6000x)
++ *
++ *  Copyright (c) 2005 Dirk Opfer
++ *
++ *  Based on xtkbd.c/locomkbd.c/corgikbd.c
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++
++#include <asm/arch/tosa.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++
++
++#define TOSA_KEY_STROBE_NUM	(11)
++#define TOSA_KEY_SENSE_NUM	(7)
++
++#define KEYMASK_ON		(0x1<<0)
++#define KEYMASK_REC		(0x1<<1)
++#define KEYMASK_SYNC		(0x1<<2)
++
++#define KB_ROWS			7
++#define KB_COLS			11
++#define KB_ROWMASK(r)		(1 << (r))
++#define SCANCODE(r,c)		( ((r)<<4) + (c) + 1 )
++#define	NR_SCANCODES		(SCANCODE(KB_ROWS-1,KB_COLS)+1+1) 
++
++#define SCAN_INTERVAL		(HZ/10)
++#define HP_SCAN_INTERVAL	(150) /* ms */
++#define HP_STABLE_COUNT		2
++
++#define TOSA_KEY_CALENDER       KEY_F1
++#define TOSA_KEY_ADDRESS        KEY_F2
++#define TOSA_KEY_FN             KEY_F3
++#define TOSA_KEY_CANCEL        	KEY_F4
++#define TOSA_KEY_OFF            KEY_SUSPEND
++#define TOSA_KEY_CENTER         KEY_F5
++#define TOSA_KEY_REC            KEY_F6
++#define TOSA_KEY_LIGHT          KEY_F7
++#define TOSA_KEY_RECORD         KEY_F8
++#define TOSA_KEY_HOME           KEY_F9
++#define TOSA_KEY_MAIL           KEY_F10
++#define TOSA_KEY_OK             KEY_F11
++#define TOSA_KEY_MENU           KEY_F12
++#define TOSA_KEY_SYNC           KEY_F13
++
++#define GET_ROWS_STATUS(c)	((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT)
++#define KB_DISCHARGE_DELAY	10
++#define KB_ACTIVATE_DELAY	10
++
++
++static unsigned char tosakbd_keycode[NR_SCANCODES] = {
++	0,                                                                                                              	/* 0 */
++	0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, 0, 0, 0, TOSA_KEY_OFF, 0, 0, 0, 0,					/*1 - 16*/
++	KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, 0, 0, 0, TOSA_KEY_RECORD, 0, 0, 0, 0,				/*17 - 32*/
++	KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, 0, 0, 0, TOSA_KEY_SYNC, 0, 0, 0, 0,				/*33 - 48*/
++	KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESS, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, KEY_LEFTSHIFT, 0 , 0,0 , 0, 0, 0, 0,	/*49 - 64*/
++	KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDER, TOSA_KEY_HOME, TOSA_KEY_REC, TOSA_KEY_LIGHT, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,	/*65 - 80*/
++	KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, 0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0,			/*81 - 96*/
++	KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0,  			/*97 - 109*/
++};
++
++struct tosakbd {
++	unsigned char keycode[ARRAY_SIZE(tosakbd_keycode)];
++	struct input_dev *input;
++
++	spinlock_t lock;
++	struct timer_list timer;
++	struct timer_list hptimer;
++
++	int hp_state;
++	int hp_count;
++
++	unsigned int suspended;
++	unsigned long suspend_jiffies;
++};
++
++/* Helper functions for reading the keyboard matrix 
++ * Note: We should really be using pxa_gpio_mode to alter GPDR but it 
++ *       requires a function call per GPIO bit which is excessive
++ *       when we need to access 12 bits at once, multiple times.
++ * These functions must be called within local_irq_save()/local_irq_restore()
++ * or similar. 
++ */
++static inline void tosakbd_discharge_all(void)
++{
++	/* STROBE All HiZ */
++	GPCR1  = TOSA_GPIO_HIGH_STROBE_BIT;
++	GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT;
++	GPCR2  = TOSA_GPIO_LOW_STROBE_BIT;
++	GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT;
++}
++
++static inline void tosakbd_activate_all(void)
++{
++	/* STROBE ALL -> High */
++	GPSR1  = TOSA_GPIO_HIGH_STROBE_BIT;
++	GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT;
++	GPSR2  = TOSA_GPIO_LOW_STROBE_BIT;
++	GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT;
++
++	udelay(KB_DISCHARGE_DELAY);
++
++	/* STATE CLEAR */
++	GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; 
++}
++
++static inline void tosakbd_activate_col(int col)
++{
++	if (col<=5) {
++		/* STROBE col -> High, not col -> HiZ */
++		GPSR1 = TOSA_GPIO_STROBE_BIT(col);
++	 	GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
++	} else {
++		/* STROBE col -> High, not col -> HiZ */
++		GPSR2 = TOSA_GPIO_STROBE_BIT(col);
++		GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
++	} 
++}
++
++static inline void tosakbd_reset_col(int col)
++{
++	if (col<=5) {
++		/* STROBE col -> Low */
++		GPCR1 = TOSA_GPIO_STROBE_BIT(col);
++		/* STROBE col -> out, not col -> HiZ */
++		GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
++	} else {
++		/* STROBE col -> Low */
++		GPCR2 = TOSA_GPIO_STROBE_BIT(col);
++		/* STROBE col -> out, not col -> HiZ */
++		GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
++	} 
++}
++
++/*
++ * Read the GPIOs for POWER, RECORD and SYNC
++ */
++static int read_port_key_status_raw(void)
++{
++	int val=0;
++
++	/* Power key */
++	if ((GPLR0 & GPIO_bit(TOSA_GPIO_ON_KEY))==0)
++		val |= KEYMASK_ON;
++	/* Record key */
++	if ((GPLR0 & GPIO_bit(TOSA_GPIO_RECORD_BTN))==0)
++		val |= KEYMASK_REC;
++	/* Sync key */
++	if ((GPLR0 & GPIO_bit(TOSA_GPIO_SYNC))==0)
++		val |= KEYMASK_SYNC;
++	return val;
++}
++
++
++/*
++ * The tosa keyboard only generates interrupts when a key is pressed.
++ * So when a key is pressed, we enable a timer.  This timer scans the
++ * keyboard, and this is how we detect when the key is released.
++ */
++
++/* Scan the hardware keyboard and push any changes up through the input layer */
++static void tosakbd_scankeyboard(struct tosakbd *tosakbd_data) 
++{
++	unsigned int row, col, rowd;
++	unsigned long flags;
++	unsigned int num_pressed = 0;
++
++	if (tosakbd_data->suspended)
++		return;
++
++	spin_lock_irqsave(&tosakbd_data->lock, flags);
++
++	for (col = 0; col < KB_COLS; col++) {
++		/*
++		 * Discharge the output driver capacitatance
++		 * in the keyboard matrix. (Yes it is significant..)
++		 */
++		tosakbd_discharge_all();
++		udelay(KB_DISCHARGE_DELAY);
++
++		tosakbd_activate_col( col);
++		udelay(KB_ACTIVATE_DELAY);
++		
++		rowd = GET_ROWS_STATUS(col);
++
++		for (row = 0; row < KB_ROWS; row++) {
++			unsigned int scancode, pressed;
++			scancode = SCANCODE(row, col);
++			pressed = rowd & KB_ROWMASK(row);
++			input_report_key(tosakbd_data->input, tosakbd_data->keycode[scancode], pressed);
++			if (pressed)
++				num_pressed++;
++		}
++
++		tosakbd_reset_col(col);
++	}
++
++	tosakbd_activate_all();
++
++	rowd = read_port_key_status_raw();
++
++	for (row = 0; row < 3; row++ ) {
++		unsigned int scancode, pressed;
++		scancode = SCANCODE(row, KB_COLS);
++		pressed = rowd & KB_ROWMASK(row);
++		input_report_key(tosakbd_data->input, tosakbd_data->keycode[scancode], pressed);
++		if (pressed)
++			num_pressed++;
++
++		if (pressed && (tosakbd_data->keycode[scancode] == TOSA_KEY_OFF)
++								&& time_after(jiffies, tosakbd_data->suspend_jiffies + msecs_to_jiffies(1000))) {
++			input_event(tosakbd_data->input, EV_PWR, TOSA_KEY_OFF, 1);
++			tosakbd_data->suspend_jiffies = jiffies;
++		}
++	}
++	
++	input_sync(tosakbd_data->input);
++
++	/* if any keys are pressed, enable the timer */
++	if (num_pressed)
++		mod_timer(&tosakbd_data->timer, jiffies + SCAN_INTERVAL);
++
++	spin_unlock_irqrestore(&tosakbd_data->lock, flags);
++}
++
++/* 
++ * tosa keyboard interrupt handler.
++ */
++static irqreturn_t tosakbd_interrupt(int irq, void *dev_id)
++{
++	struct tosakbd *tosakbd_data = dev_id;
++
++	if (!timer_pending(&tosakbd_data->timer)) 
++	{
++		/** wait chattering delay **/
++		udelay(20);
++		tosakbd_scankeyboard(tosakbd_data);
++	}
++
++	return IRQ_HANDLED;
++}
++
++/*
++ * tosa timer checking for released keys
++ */
++static void tosakbd_timer_callback(unsigned long data)
++{
++	struct tosakbd *tosakbd_data = (struct tosakbd *) data;
++	tosakbd_scankeyboard(tosakbd_data);
++}
++
++/*
++ * The headphone generates an interrupt.
++ * We debounce the switche and pass them to the input system.
++ */
++
++static irqreturn_t tosakbd_hp_isr(int irq, void *dev_id)
++{
++	struct tosakbd *tosakbd_data = dev_id;
++
++	if (!timer_pending(&tosakbd_data->hptimer))
++		mod_timer(&tosakbd_data->hptimer, jiffies + msecs_to_jiffies(HP_SCAN_INTERVAL));
++
++	return IRQ_HANDLED;
++}
++
++static void tosakbd_hp_timer(unsigned long data)
++{
++	struct tosakbd *tosakbd_data = (struct tosakbd *) data;
++	unsigned long state;
++	unsigned long flags;
++
++	state = (GPLR(TOSA_GPIO_EAR_IN) & GPIO_bit(TOSA_GPIO_EAR_IN));
++	if (state != tosakbd_data->hp_state) {
++		tosakbd_data->hp_count = 0;
++		tosakbd_data->hp_state = state;
++	} else if (tosakbd_data->hp_count < HP_STABLE_COUNT) {
++		tosakbd_data->hp_count++;
++	}
++
++	if (tosakbd_data->hp_count >= HP_STABLE_COUNT) {
++		spin_lock_irqsave(&tosakbd_data->lock, flags);
++
++		input_report_switch(tosakbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(TOSA_GPIO_EAR_IN) & GPIO_bit(TOSA_GPIO_EAR_IN)) == 0));
++		input_sync(tosakbd_data->input);
++
++		spin_unlock_irqrestore(&tosakbd_data->lock, flags);
++	} else {
++		mod_timer(&tosakbd_data->hptimer, jiffies + msecs_to_jiffies(HP_SCAN_INTERVAL));
++	}
++}
++
++#ifdef CONFIG_PM
++static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct tosakbd *tosakbd = platform_get_drvdata(dev);
++
++	tosakbd->suspended = 1;
++
++	return 0;
++}
++
++static int tosakbd_resume(struct platform_device *dev)
++{
++	struct tosakbd *tosakbd = platform_get_drvdata(dev);
++
++	/* Upon resume, ignore the suspend key for a short while */
++	tosakbd->suspend_jiffies = jiffies;
++	tosakbd->suspended = 0;
++
++	return 0;
++}
++#else
++#define tosakbd_suspend		NULL
++#define tosakbd_resume		NULL
++#endif
++
++static int __init tosakbd_probe(struct platform_device *pdev) {
++
++	int i;
++	struct tosakbd *tosakbd;
++	struct input_dev *input_dev;
++
++	tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL);
++	if (!tosakbd)
++		return -ENOMEM;
++
++	input_dev = input_allocate_device();
++	if (!input_dev) {
++		kfree(tosakbd);
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(pdev,tosakbd);
++
++	spin_lock_init(&tosakbd->lock);
++
++	/* Init Keyboard rescan timer */
++	init_timer(&tosakbd->timer);
++	tosakbd->timer.function = tosakbd_timer_callback;
++	tosakbd->timer.data = (unsigned long) tosakbd;
++
++	/* Init Headphone Timer */
++	init_timer(&tosakbd->hptimer);
++	tosakbd->hptimer.function = tosakbd_hp_timer;
++	tosakbd->hptimer.data = (unsigned long) tosakbd;
++
++	tosakbd->suspend_jiffies = jiffies;
++
++	tosakbd->input = input_dev;
++
++	input_dev->private = tosakbd;
++	input_dev->name = "Tosa Keyboard";
++	input_dev->phys = "tosakbd/input0";
++	input_dev->cdev.dev = &pdev->dev;
++
++	input_dev->id.bustype = BUS_HOST;
++	input_dev->id.vendor = 0x0001;
++	input_dev->id.product = 0x0001;
++	input_dev->id.version = 0x0100;
++
++	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
++	input_dev->keycode = tosakbd->keycode;
++	input_dev->keycodesize = sizeof(unsigned char);
++	input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode);
++
++	memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd->keycode));
++	for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++)
++		set_bit(tosakbd->keycode[i], input_dev->keybit);
++	clear_bit(0, input_dev->keybit);
++	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
++
++	input_register_device(tosakbd->input);
++
++	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
++	for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
++		pxa_gpio_mode( TOSA_GPIO_KEY_SENSE(i) | GPIO_IN);	
++		if (request_irq(TOSA_IRQ_GPIO_KEY_SENSE(i), tosakbd_interrupt,
++						SA_INTERRUPT | SA_TRIGGER_RISING, "tosakbd", tosakbd)) {
++			printk("tosakbd: Can't get IRQ: %d !\n", i);
++		}
++	}
++	
++	/* Set Strobe lines as outputs - set high */
++	for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) {
++		pxa_gpio_mode( TOSA_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);	
++	}
++
++	// Power&Rec Button
++	pxa_gpio_mode( TOSA_GPIO_ON_KEY | GPIO_IN);	
++	pxa_gpio_mode( TOSA_GPIO_RECORD_BTN | GPIO_IN);	
++	pxa_gpio_mode( TOSA_GPIO_SYNC | GPIO_IN);
++	pxa_gpio_mode( TOSA_GPIO_EAR_IN | GPIO_IN);
++
++	if (request_irq(TOSA_IRQ_GPIO_ON_KEY, tosakbd_interrupt, SA_INTERRUPT | SA_TRIGGER_FALLING, "On key", tosakbd) ||
++	    request_irq(TOSA_IRQ_GPIO_RECORD_BTN, tosakbd_interrupt, SA_INTERRUPT | SA_TRIGGER_FALLING, "Record key", tosakbd) ||
++	    request_irq(TOSA_IRQ_GPIO_SYNC, tosakbd_interrupt, SA_INTERRUPT | SA_TRIGGER_FALLING, "Sync key", tosakbd) ||
++	    request_irq(TOSA_IRQ_GPIO_EAR_IN, tosakbd_hp_isr, SA_INTERRUPT | SA_TRIGGER_FALLING, "HP in", tosakbd)) {
++		printk("Could not allocate KEYBD IRQ!\n");
++	}
++
++	printk(KERN_INFO "input: Tosa Keyboard Registered\n");
++
++	return 0;
++}
++
++static int tosakbd_remove(struct platform_device *dev) {
++	
++	int i;
++	struct tosakbd *tosakbd = platform_get_drvdata(dev);
++	
++	for (i = 0; i < TOSA_KEY_SENSE_NUM; i++)
++		free_irq(TOSA_IRQ_GPIO_KEY_SENSE(i),tosakbd); 
++	
++	free_irq(TOSA_IRQ_GPIO_ON_KEY,tosakbd); 
++	free_irq(TOSA_IRQ_GPIO_RECORD_BTN,tosakbd); 
++	free_irq(TOSA_IRQ_GPIO_SYNC,tosakbd); 
++
++	del_timer_sync(&tosakbd->timer);
++
++	input_unregister_device(tosakbd->input);
++	
++	kfree(tosakbd);
++	
++	return 0;
++}
++
++static struct platform_driver tosakbd_driver = {
++	.probe		= tosakbd_probe,
++	.remove		= tosakbd_remove,
++	.suspend	= tosakbd_suspend,
++	.resume		= tosakbd_resume,
++	.driver		= {
++		.name	= "tosa-keyboard",
++	},
++};
++
++static int __devinit tosakbd_init(void)
++{
++	return platform_driver_register(&tosakbd_driver);
++}
++
++static void __exit tosakbd_exit(void)
++{
++ 	platform_driver_unregister(&tosakbd_driver);
++}
++
++module_init(tosakbd_init);
++module_exit(tosakbd_exit);
++
++MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
++MODULE_DESCRIPTION("Tosa Keyboard Driver");
++MODULE_LICENSE("GPLv2");
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/tosa-lcdnoise-r1.patch b/packages/linux/linux-openzaurus-2.6.18+git/tosa-lcdnoise-r1.patch
new file mode 100644
index 0000000000..624098bc64
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/tosa-lcdnoise-r1.patch
@@ -0,0 +1,157 @@
+Index: linux-2.6.18/arch/arm/mach-pxa/tosa.c
+===================================================================
+--- linux-2.6.18.orig/arch/arm/mach-pxa/tosa.c	2006-09-20 17:14:14.000000000 +0200
++++ linux-2.6.18/arch/arm/mach-pxa/tosa.c	2006-09-20 17:14:43.000000000 +0200
+@@ -2,6 +2,7 @@
+  *  Support for Sharp SL-C6000x PDAs
+  *  Model: (Tosa)
+  *
++ *  Copyright (c) 2006 Wolfson Microelectronics PLC.
+  *  Copyright (c) 2005 Dirk Opfer
+  *
+  *	Based on code written by Sharp/Lineo for 2.4 kernels
+@@ -47,6 +48,8 @@
+ #include <asm/hardware/tmio.h>
+ #include <asm/mach/sharpsl_param.h>
+ 
++#include <linux/wm97xx.h>
++
+ #include "generic.h"
+ 
+ /*
+@@ -429,6 +432,16 @@
+     },
+ };
+ 
++
++/*
++ * Tosa Touchscreen device
++ */
++
++static struct wm97xx_machinfo tosa_ts_machinfo = {
++    .get_hsync_time   = tosa_get_hsync_time,
++    .wait_hsync       = tosa_wait_hsync,
++};
++
+ /*
+  * Tosa Blueooth
+  */
+@@ -458,6 +471,7 @@
+ 	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+ 
+ 	mdelay(1000);
++	wm97xx_unset_machinfo();
+ 	arm_machine_restart('h');
+ }
+ 
+@@ -503,6 +517,8 @@
+ 	platform_scoop_config = &tosa_pcmcia_config;
+ 
+ 	platform_add_devices(devices, ARRAY_SIZE(devices));
++
++    wm97xx_set_machinfo(&tosa_ts_machinfo);
+ }
+ 
+ static void __init fixup_tosa(struct machine_desc *desc,
+Index: linux-2.6.18/arch/arm/mach-pxa/tosa_lcd.c
+===================================================================
+--- linux-2.6.18.orig/arch/arm/mach-pxa/tosa_lcd.c	2006-09-20 17:14:14.000000000 +0200
++++ linux-2.6.18/arch/arm/mach-pxa/tosa_lcd.c	2006-09-20 17:14:15.000000000 +0200
+@@ -1,6 +1,7 @@
+ /*
+  *  LCD / Backlight control code for Sharp SL-6000x (tosa)
+  *
++ *  Copyright (c) 2006      Wolfson Microelectronics PLC.
+  *  Copyright (c) 2005		Dirk Opfer
+  *
+  *  This program is free software; you can redistribute it and/or modify
+@@ -59,6 +60,8 @@
+ static struct ssp_dev tosa_nssp_dev;
+ static struct ssp_state tosa_nssp_state;
+ static spinlock_t tosa_nssp_lock;
++static int blanked;
++static unsigned long hsync_time;
+ 
+ static unsigned short normal_i2c[] = {
+ 	DAC_BASE,
+@@ -130,6 +133,17 @@
+ 	pxa_nssp_output(TG_GPOSR,0x02);		/* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */
+ }
+ 
++static unsigned long calc_hsync_time(const struct fb_videomode *mode) {
++    /* The 25 and 44 'magic numbers' are from Sharp's 2.4 patches */
++    if (mode->yres == 640) {
++        return 25;
++    }
++    if (mode->yres == 320) {
++        return 44;
++    }
++    return 0;
++}
++
+ static void tosa_lcd_tg_on(struct device *dev, const struct fb_videomode *mode)
+ {
+ 	const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
+@@ -154,6 +168,8 @@
+ 		/* set common voltage */
+ 		i2c_smbus_write_byte_data(tosa_i2c_dac, DAC_CH1, comadj);
+ 
++    blanked = 0;
++    hsync_time = calc_hsync_time(mode);
+ }
+ 
+ static void tosa_lcd_tg_off(struct device *dev)
+@@ -172,6 +188,8 @@
+ 	
+ 	/* L3V Off */
+ 	reset_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC3693_L3V_ON); 
++
++    blanked = 1;
+ }
+ 
+ static int tosa_detect_client(struct i2c_adapter* adapter, int address, int kind) {
+@@ -238,6 +256,23 @@
+ 	return 0;
+ }
+ 
++unsigned long tosa_get_hsync_time(void)
++{
++/* This method should eventually contain the correct algorithm for calculating
++   the hsync_time */
++    if (blanked)
++        return 0;
++    else
++        return hsync_time;
++}
++
++void tosa_wait_hsync(void)
++{
++    /* Waits for a rising edge on the VGA line */
++    while((GPLR(TOSA_GPIO_VGA_LINE) & GPIO_bit(TOSA_GPIO_VGA_LINE)) == 0);
++    while((GPLR(TOSA_GPIO_VGA_LINE) & GPIO_bit(TOSA_GPIO_VGA_LINE)) != 0);
++}
++
+ static struct i2c_driver tosa_driver={
+ 	.id		= TOSA_LCD_I2C_DEVICEID,
+ 	.attach_adapter	= tosa_attach_adapter,
+Index: linux-2.6.18/include/asm-arm/arch-pxa/tosa.h
+===================================================================
+--- linux-2.6.18.orig/include/asm-arm/arch-pxa/tosa.h	2006-09-20 17:14:13.000000000 +0200
++++ linux-2.6.18/include/asm-arm/arch-pxa/tosa.h	2006-09-20 17:14:15.000000000 +0200
+@@ -1,6 +1,7 @@
+ /*
+  * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+  *
++ * Copyright (c) 2006 Wolfson Microelectronics PLC.
+  * Copyright (c) 2005 Dirk Opfer
+  *
+  * Based on Sharp's 2.4 kernel patches
+@@ -187,4 +188,8 @@
+ extern struct platform_device tosascoop_jc_device;
+ extern struct platform_device tosascoop_device;
+ extern struct platform_device tc6393_device;
++
++unsigned long tosa_get_hsync_time(void);
++void tosa_wait_hsync(void);
++
+ #endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/tosa-tmio-lcd-r10.patch b/packages/linux/linux-openzaurus-2.6.18+git/tosa-tmio-lcd-r10.patch
new file mode 100644
index 0000000000..aef3a047c1
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/tosa-tmio-lcd-r10.patch
@@ -0,0 +1,472 @@
+ arch/arm/mach-pxa/Kconfig    |    5 
+ arch/arm/mach-pxa/Makefile   |    2 
+ arch/arm/mach-pxa/tosa.c     |   49 +++++-
+ arch/arm/mach-pxa/tosa_lcd.c |  344 +++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 396 insertions(+), 4 deletions(-)
+
+Index: git/arch/arm/mach-pxa/Makefile
+===================================================================
+--- git.orig/arch/arm/mach-pxa/Makefile	2006-11-07 22:13:10.000000000 +0000
++++ git/arch/arm/mach-pxa/Makefile	2006-11-07 23:29:38.000000000 +0000
+@@ -17,7 +17,7 @@ obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o 
+ obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
+ obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
+ obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o
+-obj-$(CONFIG_MACH_TOSA)         += tosa.o sharpsl_pm.o tosa_pm.o
++obj-$(CONFIG_MACH_TOSA)         += tosa.o sharpsl_pm.o tosa_pm.o tosa_lcd.o
+ obj-$(CONFIG_MACH_HX2750)	+= hx2750.o hx2750_test.o
+ 
+ # Support for blinky lights
+Index: git/arch/arm/mach-pxa/tosa_lcd.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/arch/arm/mach-pxa/tosa_lcd.c	2006-11-07 23:29:25.000000000 +0000
+@@ -0,0 +1,344 @@
++/*
++ *  LCD / Backlight control code for Sharp SL-6000x (tosa)
++ *
++ *  Copyright (c) 2005		Dirk Opfer
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/fb.h>
++
++#include <asm/mach/sharpsl_param.h>
++#include <asm/hardware.h>
++#include <asm/hardware/scoop.h>
++#include <asm/hardware/tmio.h>
++#include <asm/arch/ssp.h>
++#include <asm/arch/sharpsl.h>
++#include <asm/arch/tosa.h>
++#include <asm/arch/pxa-regs.h>
++
++#define	DAC_BASE	0x4e
++#define DAC_CH1		0
++#define DAC_CH2		1
++
++#define TG_REG0_VQV	0x0001
++#define TG_REG0_COLOR	0x0002
++#define TG_REG0_UD	0x0004
++#define TG_REG0_LR	0x0008
++#define COMADJ_DEFAULT 	97
++#define TOSA_LCD_I2C_DEVICEID	0x4711			// Fixme: new value
++
++static void tosa_lcd_tg_init(struct device *dev);
++static void tosa_lcd_tg_on(struct device *dev, const struct fb_videomode *mode);
++static void tosa_lcd_tg_off(struct device *dev);
++static void tosa_set_backlight(int intensity);
++
++const static struct tmio_lcd_ops tosa_tc6393_lcd_ops = {
++	.init = tosa_lcd_tg_init,
++	.tg_on = tosa_lcd_tg_on,
++	.tg_off = tosa_lcd_tg_off,
++};
++
++static struct platform_device *tosabl_device;
++static struct i2c_driver tosa_driver;
++static struct i2c_client* tosa_i2c_dac;
++static int initialised;
++static int comadj;
++static int bl_intensity;
++static struct ssp_dev tosa_nssp_dev;
++static struct ssp_state tosa_nssp_state;
++static spinlock_t tosa_nssp_lock;
++
++static unsigned short normal_i2c[] = {
++	DAC_BASE,
++	I2C_CLIENT_END 
++};
++I2C_CLIENT_INSMOD;
++
++static struct corgibl_machinfo tosa_bl_machinfo = {
++	.max_intensity = 255,
++	.default_intensity = 68,
++	.limit_mask = 0x0b,
++	.set_bl_intensity = tosa_set_backlight,
++};
++
++int tosa_bl_intensity(void)
++{
++	return bl_intensity;
++}
++
++static void pxa_nssp_output(unsigned char reg, unsigned char data)
++{
++	unsigned long flag, dummy;
++	u32 dat = ( ((reg << 5) & 0xe0) | (data & 0x1f) );
++	spin_lock_irqsave(&tosa_nssp_lock, flag);
++
++	ssp_config(&tosa_nssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(128));
++	ssp_enable(&tosa_nssp_dev);
++
++	ssp_write_word(&tosa_nssp_dev,dat);
++
++	/* Read null data back from device to prevent SSP overflow */
++	ssp_read_word(&tosa_nssp_dev, &dummy);
++	ssp_disable(&tosa_nssp_dev);
++	spin_unlock_irqrestore(&tosa_nssp_lock, flag);
++
++}
++
++static void tosa_set_backlight(int intensity)
++{
++	if (!tosa_i2c_dac)
++		return;
++
++	bl_intensity = intensity;
++	/* SetBacklightDuty */
++	i2c_smbus_write_byte_data(tosa_i2c_dac, DAC_CH2, (unsigned char)intensity);
++
++	/* SetBacklightVR */
++	if (intensity)
++		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BL_C20MA);
++	else
++		reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BL_C20MA);
++
++	/* bl_enable GP04=1 otherwise GP04=0*/
++	pxa_nssp_output(TG_GPODR2, intensity ? 0x01 : 0x00);	
++}
++
++static void tosa_lcd_tg_init(struct device *dev)
++{
++	/* L3V On */
++	set_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC3693_L3V_ON); 
++	mdelay(60);
++
++	/* TG On */
++	reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_TG_ON);
++	mdelay(60);
++
++	pxa_nssp_output(TG_TPOSCTL,0x00);	/* delayed 0clk TCTL signal for VGA */
++	pxa_nssp_output(TG_GPOSR,0x02);		/* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */
++}
++
++static void tosa_lcd_tg_on(struct device *dev, const struct fb_videomode *mode)
++{
++	const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
++	pxa_nssp_output(TG_PNLCTL, value | (mode->yres == 320 ? 0 :  TG_REG0_VQV));
++
++	/* TG LCD pannel power up */
++	pxa_nssp_output(TG_PINICTL,0x4);
++	mdelay(50);
++
++	/* TG LCD GVSS */
++	pxa_nssp_output(TG_PINICTL,0x0);
++
++	if (!initialised)
++	{
++		/* after the pannel is powered up the first time, we can access the i2c bus */
++		/* so probe for the DAC */
++		i2c_add_driver(&tosa_driver);
++		initialised = 1;
++		mdelay(50);
++	}
++	if (tosa_i2c_dac)
++		/* set common voltage */
++		i2c_smbus_write_byte_data(tosa_i2c_dac, DAC_CH1, comadj);
++
++}
++
++static void tosa_lcd_tg_off(struct device *dev)
++{
++	/* TG LCD VHSA off */
++	pxa_nssp_output(TG_PINICTL,0x4);
++	mdelay(50);
++	
++	/* TG LCD signal off */
++	pxa_nssp_output(TG_PINICTL,0x6);
++	mdelay(50);
++	
++	/* TG Off */
++	set_tc6393_gpio(&tc6393_device.dev, TOSA_TC6393_TG_ON);
++	mdelay(100);
++	
++	/* L3V Off */
++	reset_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC3693_L3V_ON); 
++}
++
++static int tosa_detect_client(struct i2c_adapter* adapter, int address, int kind) {
++	int err = 0;
++
++	printk("Tosa-LCD: DAC detected address:0x%2.2x\n",address);
++	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA ))
++		goto ERROR0;
++
++	if (!(tosa_i2c_dac = (struct i2c_client*)kzalloc(sizeof(*tosa_i2c_dac), GFP_KERNEL))) {
++		err = -ENOMEM;
++		goto ERROR0;
++	}
++
++	//i2c_set_clientdata(tosa_i2c_dac, data);
++	tosa_i2c_dac->addr = address;
++	tosa_i2c_dac->adapter = adapter;
++	tosa_i2c_dac->driver = &tosa_driver;
++	tosa_i2c_dac->dev.parent = &tc6393_device.dev;
++	strcpy(tosa_i2c_dac->name, "tosa lcd");
++	if ((err = i2c_attach_client(tosa_i2c_dac)))
++		goto ERROR3;
++
++	/* Now i2c is ready, allocate the backlight device*/
++	tosabl_device = platform_device_alloc("corgi-bl", -1);
++	if (!tosabl_device) {
++		err = -ENOMEM;
++		goto ERROR4;
++	}
++
++	/* set parent device */
++	tosabl_device->dev.parent = &tosa_i2c_dac->dev;
++	tosabl_device->dev.platform_data  = &tosa_bl_machinfo;
++
++	err = platform_device_add(tosabl_device);
++
++	if (err)
++		platform_device_put(tosabl_device);
++
++	/* set common voltage */
++	i2c_smbus_write_byte_data(tosa_i2c_dac, DAC_CH1, comadj);
++
++	return 0;
++ERROR4:
++	i2c_detach_client(tosa_i2c_dac);
++ERROR3:
++	kfree(tosa_i2c_dac);
++ERROR0:
++	return err;
++}
++
++static int tosa_attach_adapter(struct i2c_adapter* adapter) {
++	return i2c_probe(adapter, &addr_data, &tosa_detect_client);
++}
++
++static int tosa_detach_client(struct i2c_client* client) {
++	int err;
++
++	if ((err = i2c_detach_client(client))) {
++		printk(KERN_ERR "tosa: Cannot deregister client\n");
++		return err;
++	}
++	kfree(client);
++	return 0;
++}
++
++static struct i2c_driver tosa_driver={
++	.id		= TOSA_LCD_I2C_DEVICEID,
++	.attach_adapter	= tosa_attach_adapter,
++	.detach_client	= tosa_detach_client,
++};
++
++static int __init tosa_lcd_probe(struct platform_device *pdev)
++{
++	int ret;
++	spin_lock_init(&tosa_nssp_lock);
++
++	if (!pdev->dev.platform_data)
++		return -EINVAL;
++
++	/* Set Common Voltage */
++	comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
++
++	ret=ssp_init(&tosa_nssp_dev,2,0);
++
++	/* initialize SSP */
++	pxa_gpio_mode(GPIO83_NSSP_TX);
++	pxa_gpio_mode(GPIO81_NSSP_CLK_OUT);
++	pxa_gpio_mode(GPIO82_NSSP_FRM_OUT);
++
++	if (ret) 
++		printk(KERN_ERR "Unable to register NSSP handler!\n");
++	else {
++		struct tmio_lcd_ops* *tmio_ops = pdev->dev.platform_data;
++		ssp_disable(&tosa_nssp_dev);
++		initialised = 0;
++
++		/* Set the lcd functions */
++		*tmio_ops = (struct tmio_lcd_ops*) &tosa_tc6393_lcd_ops;
++	}
++
++	return ret;
++}
++
++static int tosa_lcd_remove(struct platform_device *pdev)
++{
++	/* delete the lcd functions */
++	struct tmio_lcd_ops* *tmio_ops = pdev->dev.platform_data;
++	*tmio_ops = NULL;
++	
++	ssp_exit(&tosa_nssp_dev);
++	
++	if (tosa_i2c_dac) {
++		i2c_detach_client(tosa_i2c_dac);
++		kfree(tosa_i2c_dac);
++	}
++
++	return 0;
++}
++
++#ifdef CONFIG_PM 
++
++static int tosa_lcd_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	ssp_flush(&tosa_nssp_dev);
++	ssp_save_state(&tosa_nssp_dev,&tosa_nssp_state);
++	return 0;
++}
++
++static int tosa_lcd_resume(struct platform_device *pdev)
++{
++	printk("tosa_lcd_resume\n");
++	ssp_restore_state(&tosa_nssp_dev,&tosa_nssp_state);
++	ssp_enable(&tosa_nssp_dev);
++	printk("tosa_lcd_resume ok\n");	
++	return 0;
++}
++#else
++
++#define tosa_lcd_suspend NULL
++#define tosa_lcd_resume NULL
++
++#endif
++
++
++static struct platform_driver tosalcd_driver = {
++	.probe		= tosa_lcd_probe,
++	.remove		= tosa_lcd_remove,
++	.suspend	= tosa_lcd_suspend,
++	.resume		= tosa_lcd_resume,
++	.driver		= {
++		.name		= "tosa-lcd",
++	},
++};
++
++static int __init tosa_lcd_init(void)
++{
++	return platform_driver_register(&tosalcd_driver);
++}
++
++static void __exit tosa_lcd_cleanup (void)
++{
++	platform_driver_unregister (&tosalcd_driver);
++}
++
++device_initcall(tosa_lcd_init);
++module_exit (tosa_lcd_cleanup);
++
++MODULE_DESCRIPTION ("Tosa LCD device");
++MODULE_AUTHOR ("Dirk Opfer");
++MODULE_LICENSE ("GPL v2");
+Index: git/arch/arm/mach-pxa/tosa.c
+===================================================================
+--- git.orig/arch/arm/mach-pxa/tosa.c	2006-11-07 22:13:10.000000000 +0000
++++ git/arch/arm/mach-pxa/tosa.c	2006-11-07 23:29:38.000000000 +0000
+@@ -24,6 +24,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/pm.h>
+ #include <linux/delay.h>
++#include <linux/fb.h>
+ 
+ #include <asm/setup.h>
+ #include <asm/memory.h>
+@@ -48,7 +49,6 @@
+ 
+ #include "generic.h"
+ 
+-
+ /*
+  * SCOOP Device
+  */
+@@ -345,7 +345,38 @@ static struct tmio_nand_platform_data to
+ 	.badblock_pattern = &tosa_tc6393_nand_bbt,
+ };
+ 
+-extern struct tmio_lcd_platform_data tosa_tc6393_lcd_platform_data;
++static struct fb_videomode tosa_tc6393_lcd_mode[] = {
++    {
++        .xres = 480,
++        .yres = 640,
++        .pixclock = 0x002cdf00,/* PLL divisor */
++        .left_margin = 0x004c,
++        .right_margin = 0x005b,
++        .upper_margin = 0x0001,
++        .lower_margin = 0x000d,
++        .hsync_len = 0x0002,
++        .vsync_len = 0x0001,
++        .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++        .vmode = FB_VMODE_NONINTERLACED,
++    },{
++	.xres = 240,
++	.yres = 320,
++	.pixclock = 0x00e7f203,/* PLL divisor */
++	.left_margin = 0x0024,
++	.right_margin = 0x002f,
++	.upper_margin = 0x0001,
++	.lower_margin = 0x000d,
++	.hsync_len = 0x0002,
++	.vsync_len = 0x0001,
++	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	.vmode = FB_VMODE_NONINTERLACED,
++}};
++
++struct tmio_lcd_platform_data tosa_tc6393_lcd_platform_data = {
++    .ops = NULL,
++    .modelist = tosa_tc6393_lcd_mode,
++    .num_modes = ARRAY_SIZE(tosa_tc6393_lcd_mode),
++};
+ 
+ static struct tmio_cell tosa_tc6393_cells[] = {
+ 	{
+@@ -384,6 +415,19 @@ struct platform_device tc6393_device = {
+ 	.num_resources	= ARRAY_SIZE(tc6393_resources),
+ 	.resource	= tc6393_resources,
+ };
++EXPORT_SYMBOL (tc6393_device);
++
++/*
++ * Tosa LCD / Backlight stuff
++ */
++static struct platform_device tosalcd_device = {
++    .name	= "tosa-lcd",
++    .id		= -1,
++    .dev	= {
++	.parent	= &tc6393_device.dev,
++	.platform_data = &tosa_tc6393_lcd_platform_data.ops,
++    },
++};
+ 
+ static struct platform_device *devices[] __initdata = {
+ 	&tosascoop_device,
+@@ -391,6 +435,7 @@ static struct platform_device *devices[]
+ 	&tosakbd_device,
+ 	&tosaled_device,
+ 	&tc6393_device,
++	&tosalcd_device,
+ };
+ 
+ static void tosa_poweroff(void)
+Index: git/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- git.orig/arch/arm/mach-pxa/Kconfig	2006-11-07 22:13:10.000000000 +0000
++++ git/arch/arm/mach-pxa/Kconfig	2006-11-07 22:13:10.000000000 +0000
+@@ -129,7 +129,10 @@ config MACH_TOSA
+ 	bool "Enable Sharp SL-6000x (Tosa) Support"
+ 	depends PXA_SHARPSL_25x
+ 	select TOSHIBA_TC6393XB
+-	select SHARPSL_PM	
++	select I2C
++	select I2C_PXA
++	select SHARPSL_PM
++	select PXA_SSP
+ 
+ config PXA25x
+ 	bool
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/wm9712-reset-loop-r2.patch b/packages/linux/linux-openzaurus-2.6.18+git/wm9712-reset-loop-r2.patch
new file mode 100644
index 0000000000..78e81ea83a
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/wm9712-reset-loop-r2.patch
@@ -0,0 +1,44 @@
+ sound/soc/codecs/wm9712.c |   28 ++++++++++++++++++----------
+ 1 file changed, 18 insertions(+), 10 deletions(-)
+
+Index: git/sound/soc/codecs/wm9712.c
+===================================================================
+--- git.orig/sound/soc/codecs/wm9712.c	2006-11-07 22:10:01.000000000 +0000
++++ git/sound/soc/codecs/wm9712.c	2006-11-07 22:11:50.000000000 +0000
+@@ -618,18 +618,26 @@ static int wm9712_dapm_event(struct snd_
+ 
+ static int wm9712_reset(struct snd_soc_codec *codec, int try_warm)
+ {
+-	if (try_warm && soc_ac97_ops.warm_reset) {
+-		soc_ac97_ops.warm_reset(codec->ac97);
+-		if (!(ac97_read(codec, 0) & 0x8000))
+-			return 1;
+-	}
++	int retry = 3;
+ 
+-	soc_ac97_ops.reset(codec->ac97);
+-	if (ac97_read(codec, 0) & 0x8000)
+-		goto err;
+-	return 0;
++	while (retry--)
++	{
++		if(try_warm && soc_ac97_ops.warm_reset) {
++			soc_ac97_ops.warm_reset(codec->ac97);
++			if(ac97_read(codec, 0) & 0x8000)
++				continue;
++			else
++				return 1;
++		}
++
++		soc_ac97_ops.reset(codec->ac97);
++		if(ac97_read(codec, 0) & 0x8000)
++			continue;
++		else
++			return 0;
++
++	}
+ 
+-err:
+ 	printk(KERN_ERR "WM9712 AC97 reset failed\n");
+ 	return -EIO;
+ }
diff --git a/packages/linux/linux-openzaurus-2.6.18+git/wm9712-suspend-cold-res-r2.patch b/packages/linux/linux-openzaurus-2.6.18+git/wm9712-suspend-cold-res-r2.patch
new file mode 100644
index 0000000000..5179b47cc4
--- /dev/null
+++ b/packages/linux/linux-openzaurus-2.6.18+git/wm9712-suspend-cold-res-r2.patch
@@ -0,0 +1,16 @@
+ sound/soc/codecs/wm9712.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: git/sound/soc/codecs/wm9712.c
+===================================================================
+--- git.orig/sound/soc/codecs/wm9712.c	2006-11-07 21:57:34.000000000 +0000
++++ git/sound/soc/codecs/wm9712.c	2006-11-07 21:59:30.000000000 +0000
+@@ -651,7 +651,7 @@ static int wm9712_soc_resume(struct plat
+ 	int i, ret;
+ 	u16 *cache = codec->reg_cache;
+ 
+-	ret = wm9712_reset(codec, 1);
++	ret = wm9712_reset(codec, 0);
+ 	if (ret < 0){
+ 		printk(KERN_ERR "could not reset AC97 codec\n");
+ 		return ret;
diff --git a/packages/linux/linux-openzaurus_2.6.18+git.bb b/packages/linux/linux-openzaurus_2.6.18+git.bb
index c81d67ef5a..6232c9bf47 100644
--- a/packages/linux/linux-openzaurus_2.6.18+git.bb
+++ b/packages/linux/linux-openzaurus_2.6.18+git.bb
@@ -82,22 +82,22 @@ SRC_URI_append_collie = "\
 SRC_URI_append_tosa = "\
            ${CHSRC}/usb-ohci-hooks-r1.patch;patch=1 \
            ${CHSRC}/tmio-core-r4.patch;patch=1 \
-           file://tmio-tc6393-r7.patch;patch=1 \
-           file://tmio-nand-r6.patch;patch=1 \
-           file://tmio-ohci-r5.patch;patch=1 \
+           file://tmio-tc6393-r8.patch;patch=1 \
+           file://tmio-nand-r7.patch;patch=1 \
+           file://tmio-ohci-r6.patch;patch=1 \
            ${CHSRC}/tmio-fb-r6.patch;patch=1 \
-           ${DOSRC}/tosa-keyboard-r17.patch;patch=1 \
+           file://tosa-keyboard-r18.patch;patch=1 \
            ${DOSRC}/tosa-pxaac97-r6.patch;patch=1 \
            ${DOSRC}/tosa-tmio-r6.patch;patch=1 \
            ${DOSRC}/tosa-power-r17.patch;patch=1 \
-           file://tosa-tmio-lcd-r9.patch;patch=1 \
+           file://tosa-tmio-lcd-r10.patch;patch=1 \
            ${DOSRC}/tosa-bluetooth-r8.patch;patch=1 \
            ${DOSRC}/wm97xx-lg7-r0.patch;patch=1 \
-           ${DOSRC}/wm9712-suspend-cold-res-r1.patch;patch=1 \
-           ${DOSRC}/sharpsl-pm-postresume-r0.patch;patch=1 \
+           file://wm9712-suspend-cold-res-r2.patch;patch=1 \
+           file://sharpsl-pm-postresume-r1.patch;patch=1 \
            ${DOSRC}/wm97xx-dig-restore-r0.patch;patch=1 \
            ${DOSRC}/wm97xx-miscdevs-resume-r0.patch;patch=1 \
-           ${DOSRC}/wm9712-reset-loop-r1.patch;patch=1 \
+           file://wm9712-reset-loop-r2.patch;patch=1 \
            file://tosa-lcdnoise-r1.patch;patch=1 \
            file://wm97xx-lcdnoise-r0.patch;patch=1 "
 #          ${DOSRC}/tosa-asoc-r1.patch;patch=1 "