gumstix-kernel : Update from gumstix svn so kernel builds again.

4 files changed, 139 insertions, 156 deletions

diff --git a/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch b/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch
index 0d4425412c..17ead87f12 100644
--- a/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch
+++ b/packages/linux/gumstix-kernel-2.6.21/smc91x-fail-if-no-chip.patch
@@ -52,7 +52,7 @@
  	
 -proceed:
 +proceed1:
-+  printk(KERN_ERR "%s: found %d smc91x chip(s)\n", __FUNCTION__);
++  printk(KERN_ERR "%s: found %d smc91x chip(s)\n", __FUNCTION__,num_devices);
  	pxa_gpio_mode(GPIO15_nCS_1_MD);
  
  	if(smc91x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
diff --git a/packages/linux/gumstix-kernel-2.6.21/tsc2003.c b/packages/linux/gumstix-kernel-2.6.21/tsc2003.c
index a4a68b756d..8836537b77 100644
--- a/packages/linux/gumstix-kernel-2.6.21/tsc2003.c
+++ b/packages/linux/gumstix-kernel-2.6.21/tsc2003.c
@@ -3,7 +3,8 @@
  *
  *  Copyright (C) 2005 Bill Gatliff <bgat at billgatliff.com>
  *  Changes for 2.6.20 kernel by Nicholas Chen <nchen at cs.umd.edu>
- *  Changes for 2.6.21 kernel by Chris Dollar <chris.dollar at gmail.com>
+ *  Changes to poll for events rather than use penirq by 
+ *  Chris Dollar <chris.dollar at gmail.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -12,7 +13,6 @@
  *  Driver for TI's TSC2003 I2C Touch Screen Controller
  */
 
-//#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -21,10 +21,8 @@
 #include <linux/bcd.h>
 #include <linux/list.h>
 #include <linux/device.h>
-#include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/delay.h>
-#include <asm-arm/arch-pxa/irqs.h>
 
 #define DRIVER_NAME "tsc2003"
 #define TSC2003_CMD(cn,pdn,m) (((cn) << 4) | ((pdn) << 2) | ((m) << 1))
@@ -37,10 +35,10 @@ static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
 I2C_CLIENT_INSMOD_1(tsc2003);
 
 enum tsc2003_pd {
-	PD_POWERDOWN = 0, /* penirq */
-	PD_IREFOFF_ADCON = 1, /* no penirq */
-	PD_IREFON_ADCOFF = 2, /* penirq */
-	PD_IREFON_ADCON = 3, /* no penirq */
+	PD_POWERDOWN = 0,
+	PD_IREFOFF_ADCON = 1,
+	PD_IREFON_ADCOFF = 2,
+	PD_IREFON_ADCON = 3,
 	PD_PENIRQ_ARM = PD_IREFON_ADCOFF,
 	PD_PENIRQ_DISARM = PD_IREFON_ADCON,
 };
@@ -70,14 +68,10 @@ struct tsc2003_data {
 	struct i2c_client client;
 	struct device_driver driver;
 	struct input_dev *idev;
-	struct semaphore sem;
 	struct task_struct *tstask;
 	struct completion tstask_completion;
-	struct completion penirq_completion;
 	enum tsc2003_pd pd;
 	enum tsc2003_m m;
-	int penirq;
-
 	int vbat1;
 	int vbat2;
 	int temp0;
@@ -86,11 +80,12 @@ struct tsc2003_data {
 	int in2;
 };
 
-static int
-		tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind);
+static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address,
+			      int kind);
 
 static int tsc2003_read(struct tsc2003_data *data, enum tsc2003_cmd cmd,
-		enum tsc2003_pd pd, int *val) {
+			enum tsc2003_pd pd, int *val)
+{
 	char c;
 	char d[2];
 	int ret;
@@ -101,7 +96,8 @@ static int tsc2003_read(struct tsc2003_data *data, enum tsc2003_cmd cmd,
 		goto err;
 
 	udelay(20);
-	ret = i2c_master_recv(&data->client, d, data->m == M_12BIT ? 2 : 1);
+	ret =
+	    i2c_master_recv(&data->client, d, data->m == M_12BIT ? 2 : 1);
 	if (ret <= 0)
 		goto err;
 
@@ -111,70 +107,80 @@ static int tsc2003_read(struct tsc2003_data *data, enum tsc2003_cmd cmd,
 		if (data->m == M_12BIT)
 			*val += (d[1] >> 4);
 	}
-
 #if defined(CONFIG_I2C_DEBUG_CHIP)
 	printk(KERN_ERR "%s: val[%x] = %d\n",
-			__FUNCTION__, cmd, (((int)d[0]) << 8) + d[1]);
+	       __FUNCTION__, cmd, (((int) d[0]) << 8) + d[1]);
 #endif
 
 	return 0;
-	err: if (!ret)
+      err:if (!ret)
 		ret = -ENODEV;
 	return ret;
 }
 
 static inline int tsc2003_read_temp0(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *t) {
+				     tsc2003_pd pd, int *t)
+{
 	return tsc2003_read(d, MEAS_TEMP0, pd, t);
 }
 
 static inline int tsc2003_read_temp1(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *t) {
+				     tsc2003_pd pd, int *t)
+{
 	return tsc2003_read(d, MEAS_TEMP1, pd, t);
 }
 
 static inline int tsc2003_read_xpos(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *x) {
+				    tsc2003_pd pd, int *x)
+{
 	return tsc2003_read(d, MEAS_XPOS, pd, x);
 }
 
 static inline int tsc2003_read_ypos(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *y) {
+				    tsc2003_pd pd, int *y)
+{
 	return tsc2003_read(d, MEAS_YPOS, pd, y);
 }
 
 static inline int tsc2003_read_pressure(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *p) {
+					tsc2003_pd pd, int *p)
+{
 	return tsc2003_read(d, MEAS_Z1POS, pd, p);
 }
 
 static inline int tsc2003_read_in1(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *t) {
+				   tsc2003_pd pd, int *t)
+{
 	return tsc2003_read(d, MEAS_IN1, pd, t);
 }
 
 static inline int tsc2003_read_in2(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *t) {
+				   tsc2003_pd pd, int *t)
+{
 	return tsc2003_read(d, MEAS_IN2, pd, t);
 }
 
 static inline int tsc2003_read_vbat1(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *t) {
+				     tsc2003_pd pd, int *t)
+{
 	return tsc2003_read(d, MEAS_VBAT1, pd, t);
 }
 
 static inline int tsc2003_read_vbat2(struct tsc2003_data *d, enum
-tsc2003_pd pd, int *t) {
+				     tsc2003_pd pd, int *t)
+{
 	return tsc2003_read(d, MEAS_VBAT2, pd, t);
 }
 
-static inline int tsc2003_powerdown(struct tsc2003_data *d) {
+static inline int tsc2003_powerdown(struct tsc2003_data *d)
+{
 	/* we don't have a distinct powerdown command,
-	 so do a benign read with the PD bits cleared */
+	   so do a benign read with the PD bits cleared */
 	return tsc2003_read(d, MEAS_IN1, PD_POWERDOWN, 0);
 }
 
-void tsc2003_init_client(struct i2c_client *client) {
+void tsc2003_init_client(struct i2c_client *client)
+{
 	struct tsc2003_data *data = i2c_get_clientdata(client);
 
 	data->pd = PD_PENIRQ_DISARM;
@@ -182,34 +188,10 @@ void tsc2003_init_client(struct i2c_client *client) {
 	return;
 }
 
-static irqreturn_t tsc2003_penirq(int irq, void *v) {
-	struct tsc2003_data *d = v;
-
-	printk(KERN_INFO "penirq: %Ld\n", jiffies);
-
-    // disable the penirq while we take the sample					
-	disable_irq_nosync(d->penirq);
-
-	complete(&d->penirq_completion);
-	return IRQ_HANDLED;
-}
-
-static void tsc2003_pen_up(unsigned long v) {
-    printk(KERN_INFO "tsc2003_pen_up - re-enable irq now\n");
-	struct tsc2003_data *d = (struct tsc2003_data *)v;
-
-    enable_irq(d->penirq);
-
-	input_report_abs(d->idev, ABS_PRESSURE, 0);
-	input_sync(d->idev);
-	return;
-}
-
-static int tsc2003ts_thread(void *v) {
+static int tsc2003ts_thread(void *v)
+{
 	struct tsc2003_data *d = v;
 	struct task_struct *tsk = current;
-	int ret;
-	int err = 0;
 
 	d->tstask = tsk;
 
@@ -220,56 +202,47 @@ static int tsc2003ts_thread(void *v) {
 
 #if defined(CONFIG_I2C_DEBUG_CHIP)
 	printk(KERN_INFO "%s: address 0x%x\n",
-			__FUNCTION__, d->client.addr);
-#endif		
-			
-	do {
-      unsigned int x, y, p, fp;
-      int pen_is_up = 0;
-      
-      down(&d->sem);         
+	       __FUNCTION__, d->client.addr);
+#endif
 
-      // take the sample
-      d->pd = PD_PENIRQ_DISARM;
-      tsc2003_read_xpos(d, PD_PENIRQ_DISARM, &x);
-      tsc2003_read_ypos(d, PD_PENIRQ_DISARM, &y);
-      tsc2003_read_pressure(d, PD_PENIRQ_DISARM, &p);
+	do {
+		unsigned int x, y, p;
+		int pen_is_up = 0;
 
-      if (p < 64) {
-        p=0;
-      }
+		d->pd = PD_PENIRQ_DISARM;
+		tsc2003_read_xpos(d, PD_PENIRQ_DISARM, &x);
+		tsc2003_read_ypos(d, PD_PENIRQ_DISARM, &y);
+		tsc2003_read_pressure(d, PD_PENIRQ_DISARM, &p);
 
+		if (p < 64) {
+			p = 0;
+		}
 #if defined(CONFIG_I2C_DEBUG_CHIP)
-      printk(KERN_INFO "TSD X: %d Y: %d P: %d\n", x, y, p);
-#endif		
-
-      if (!pen_is_up) {
-        // report our touch to the input layer
-        input_report_abs(d->idev, ABS_X, 4096 - x);
-        input_report_abs(d->idev, ABS_Y, 4096 - y);
-        input_report_abs(d->idev, ABS_PRESSURE, p);
-        input_sync(d->idev);
-      }
-
-      if(p == 0) {
+		printk(KERN_INFO "TSD X: %d Y: %d P: %d\n", x, y, p);
+#endif
+
+		if (!pen_is_up) {
+			input_report_abs(d->idev, ABS_X, 4096 - x);
+			input_report_abs(d->idev, ABS_Y, 4096 - y);
+			input_report_abs(d->idev, ABS_PRESSURE, p);
+			input_sync(d->idev);
+		}
+
+		if (p == 0) {
 #if defined(CONFIG_I2C_DEBUG_CHIP)
-        printk(KERN_INFO "No pressure - pen is up!\n");
-#endif		
-        // set our pen as up
-        pen_is_up = 1;                            
-      }                    
-      else {                    
+			printk(KERN_INFO "No pressure - pen is up!\n");
+#endif
+			pen_is_up = 1;
+		} else {
 #if defined(CONFIG_I2C_DEBUG_CHIP)
-        printk(KERN_INFO "Pen is still down - sleeping and will re-sample!\n");
-#endif		
-        // set our pen as down
-        pen_is_up = 0;                            
-      }
-
-      // sleep for 3 jiffies to give us about 30 updates/sec
-      msleep (3);
+			printk(KERN_INFO
+			       "Pen is still down - sleeping and will re-sample!\n");
+#endif
+			pen_is_up = 0;
+		}
 
-      up(&d->sem);
+		// sleep for 3 jiffies to give us about 30 updates/sec
+		msleep(3);
 
 	} while (!signal_pending(tsk));
 
@@ -277,13 +250,11 @@ static int tsc2003ts_thread(void *v) {
 	complete_and_exit(&d->tstask_completion, 0);
 }
 
-static int tsc2003_idev_open(struct input_dev *idev) {
+static int tsc2003_idev_open(struct input_dev *idev)
+{
 	struct tsc2003_data *d = idev->private;
 	int ret = 0;
 
-	if (down_interruptible(&d->sem))
-		return -EINTR;
-
 	if (d->tstask)
 		panic(DRIVER_NAME "tsd already running (!). abort.");
 
@@ -293,50 +264,26 @@ static int tsc2003_idev_open(struct input_dev *idev) {
 		ret = 0;
 	}
 
-	up(&d->sem);
 	return ret;
 }
 
-static void tsc2003_idev_close(struct input_dev *idev) {
+static void tsc2003_idev_close(struct input_dev *idev)
+{
 	struct tsc2003_data *d = idev->private;
-	down_interruptible(&d->sem);
 	if (d->tstask) {
 		send_sig(SIGKILL, d->tstask, 1);
 		wait_for_completion(&d->tstask_completion);
 	}
 
-	up(&d->sem);
 	return;
 }
 
-static int tsc2003_detect_irq(struct tsc2003_data *d) {
-	d->penirq = IRQ_GPIO(16); //PWM0 GPIO
-	return 0;
-}
-
-static int tsc2003_driver_register(struct tsc2003_data *data) {
+static int tsc2003_driver_register(struct tsc2003_data *data)
+{
 	struct input_dev *idev;
 	int ret = 0;
-	int error;
-
-	init_MUTEX(&data->sem);
 
-	error = tsc2003_detect_irq(data);
-	if (error) {
-		printk(KERN_ERR "TSC2003: IRQ probe failed\n");
-	}
-
-	if (data->penirq) {
-		ret = request_irq(data->penirq, tsc2003_penirq, SA_INTERRUPT | IRQF_TRIGGER_LOW,
-				DRIVER_NAME, data);
-		if (!ret) {
-			printk(KERN_INFO "%s: irq %d\n", __FUNCTION__, data->penirq);
-			init_completion(&data->tstask_completion);
-			init_completion(&data->penirq_completion);
-		} else {
-			printk(KERN_ERR "%s: cannot grab irq %d\n", __FUNCTION__, data->penirq);
-		}
-	}
+	init_completion(&data->tstask_completion);
 
 	idev = input_allocate_device();
 	data->idev = idev;
@@ -361,19 +308,21 @@ static int tsc2003_driver_register(struct tsc2003_data *data) {
 	return ret;
 }
 
-static int tsc2003_i2c_attach_adapter(struct i2c_adapter *adapter) {
+static int tsc2003_i2c_attach_adapter(struct i2c_adapter *adapter)
+{
 	printk(KERN_INFO "tsc2003 i2c touch screen controller\n");
+#if defined(CONFIG_I2C_DEBUG_CHIP)
 	printk(KERN_INFO "Bill Gatliff <bgat at billgatliff.com\n");
-    printk(KERN_INFO "Nicholas Chen <nchen at cs.umd.edu>\n");
-
-    return i2c_probe(adapter, &addr_data, tsc2003_i2c_detect);
+	printk(KERN_INFO "Nicholas Chen <nchen at cs.umd.edu>\n");
+#endif
+	return i2c_probe(adapter, &addr_data, tsc2003_i2c_detect);
 }
 
-static int tsc2003_i2c_detach_client(struct i2c_client *client) {
+static int tsc2003_i2c_detach_client(struct i2c_client *client)
+{
 	int err;
 	struct tsc2003_data *d = i2c_get_clientdata(client);
 
-	free_irq(d->penirq, d);
 	input_unregister_device(d->idev);
 
 	if ((err = i2c_detach_client(client))) {
@@ -385,16 +334,18 @@ static int tsc2003_i2c_detach_client(struct i2c_client *client) {
 	return 0;
 }
 
-static struct i2c_driver tsc2003_driver = { 
-    .driver = {
-	    .owner = THIS_MODULE,
-	    .name = DRIVER_NAME,
-    }, 
-    .attach_adapter = tsc2003_i2c_attach_adapter,
-    .detach_client = tsc2003_i2c_detach_client, 
+static struct i2c_driver tsc2003_driver = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = DRIVER_NAME,
+		   },
+	.attach_adapter = tsc2003_i2c_attach_adapter,
+	.detach_client = tsc2003_i2c_detach_client,
 };
 
-static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind) {
+static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address,
+			      int kind)
+{
 	struct i2c_client *new_client;
 	struct tsc2003_data *data;
 
@@ -402,7 +353,8 @@ static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind
 	const char *name = "";
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
-			| I2C_FUNC_I2C | I2C_FUNC_SMBUS_WORD_DATA))
+				     | I2C_FUNC_I2C |
+				     I2C_FUNC_SMBUS_WORD_DATA))
 		goto exit;
 
 	data = kcalloc(1, sizeof(*data), GFP_KERNEL);
@@ -419,16 +371,16 @@ static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind
 	new_client->flags = 0;
 
 	/* TODO: I'm pretty sure I'm not dealing with kind correctly */
-	if (kind == 0 /* identification */|| kind < 0 /* detection */)
+	if (kind == 0 /* identification */  || kind < 0 /* detection */ )
 		kind = tsc2003;
 
 	if (kind == tsc2003)
 		name = DRIVER_NAME;
 
 	/* try a command, see if we get an ack;
-	 if we do, assume it's our device */
+	   if we do, assume it's our device */
 	printk(KERN_INFO "%s: probing address 0x%x\n",
-			__FUNCTION__, address);
+	       __FUNCTION__, address);
 	err = tsc2003_powerdown(data);
 	if (err >= 0) {
 		strlcpy(new_client->name, name, I2C_NAME_SIZE);
@@ -443,15 +395,15 @@ static int tsc2003_i2c_detect(struct i2c_adapter *adapter, int address, int kind
 			goto exit_free;
 
 		printk(KERN_INFO "%s: device address 0x%x attached.\n",
-				__FUNCTION__, address);
+		       __FUNCTION__, address);
 		return 0;
 	}
 	/* failure to detect when everything else is ok isn't an error */
 	else
 		err = 0;
 
-	exit_free: kfree(new_client);
-	exit: return err;
+      exit_free:kfree(new_client);
+      exit:return err;
 }
 
 static int __init tsc2003_init(void)
diff --git a/packages/linux/gumstix-kernel_2.6.21.bb b/packages/linux/gumstix-kernel_2.6.21.bb
index d1664e8763..e71c972053 100644
--- a/packages/linux/gumstix-kernel_2.6.21.bb
+++ b/packages/linux/gumstix-kernel_2.6.21.bb
@@ -1,4 +1,4 @@
-require linux.inc
+require gumstix-linux.inc
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
        file://defconfig \
diff --git a/packages/linux/gumstix-linux.inc b/packages/linux/gumstix-linux.inc
index 76fd15d95a..50111cb545 100644
--- a/packages/linux/gumstix-linux.inc
+++ b/packages/linux/gumstix-linux.inc
@@ -9,7 +9,10 @@ DEPENDS += " \
            u-boot-mkimage-openmoko-native \
           "
 
+KERNEL_IMAGE_BASE_NAME = ${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}
+
 S = "${WORKDIR}/linux-${PV}"
+do_deploy[dirs] = "${S}"
 
 do_configure_prepend() {
         echo "" > ${S}/.config
@@ -32,6 +35,16 @@ do_configure_prepend() {
        yes '' | oe_runmake oldconfig
 }
 
+do_sizecheck() {
+        if [ ! -z "${KERNEL_IMAGE_MAXSIZE}" ]; then
+            size=`ls -l arch/${ARCH}/boot/${KERNEL_IMAGETYPE} | awk '{ print $5}'`
+            if [ $size -ge ${KERNEL_IMAGE_MAXSIZE} ]; then
+                    rm arch/${ARCH}/boot/${KERNEL_IMAGETYPE}
+                    die  "This kernel (size=$size) is too big for your device. Please reduce the size of the kernel by making more of it modular."
+            fi
+        fi
+}
+
 do_install_prepend() {
         if test -e arch/${ARCH}/boot/Image ; then
              ln -f arch/${ARCH}/boot/Image arch/${ARCH}/boot/uImage
@@ -41,3 +54,21 @@ do_install_prepend() {
              ln -f arch/${ARCH}/boot/images/uImage arch/${ARCH}/boot/uImage
         fi
 }
+
+do_deploy() {
+        install -d ${DEPLOY_DIR_IMAGE}
+        install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.bin
+        tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz -C ${D} lib
+        
+        if test "x${KERNEL_IMAGETYPE}" = "xuImage" ; then 
+            ${OBJCOPY} -O binary -R .note -R .comment -S arch/${ARCH}/boot/compressed/vmlinux linux.bin
+            uboot-mkimage -A ${ARCH} -O linux -T kernel -C none -a ${UBOOT_ENTRYPOINT} -e ${UBOOT_ENTRYPOINT} -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.bin
+            rm -f linux.bin
+
+        fi
+}
+
+addtask sizecheck before do_install after do_compile
+addtask deploy before do_package after do_install
+
+