linux-ezx: remove outdated patches

9 files changed, 0 insertions, 1654 deletions

diff --git a/packages/linux/linux-ezx/a780-leds-r0.patch b/packages/linux/linux-ezx/a780-leds-r0.patch
deleted file mode 100644
index 31fdfc635b..0000000000
--- a/packages/linux/linux-ezx/a780-leds-r0.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/drivers/leds/Kconfig~a780-leds-r0.patch	2006-06-05 18:05:32.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Kconfig	2006-06-05 18:05:32.000000000 +0200
-@@ -66,6 +66,13 @@
- 	  This options enables support for the LEDs on the
- 	  Motorola E680(i) GSM Phone.
- 
-+config LEDS_A780
-+	tristate "LED Support for the Motorola A780 GSM Phone"
-+	depends LEDS_CLASS && PXA_EZX_A780
-+	help
-+	  This option enables support for the LEDs on the
-+	  Motorola A780 GSM Phone.
-+
- config LEDS_TRIGGER_TIMER
- 	tristate "LED Timer Trigger"
- 	depends LEDS_TRIGGERS
---- linux-2.6.16/drivers/leds/Makefile~a780-leds-r0.patch	2006-06-05 18:05:32.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Makefile	2006-06-05 18:05:32.000000000 +0200
-@@ -11,6 +11,7 @@
- obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
- obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
- obj-$(CONFIG_LEDS_E680)		+= leds-e680.o
-+obj-$(CONFIG_LEDS_A780)		+= leds-a780.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~a780-leds-r0.patch	2006-06-05 18:05:32.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-05 18:05:32.000000000 +0200
-@@ -367,6 +367,15 @@
- };
- #endif
- 
-+#ifdef CONFIG_PXA_EZX_A780
-+/*
-+ * A780 LEDs
-+ */
-+static struct platform_device a780led_device = {
-+	.name		= "a780-led",
-+	.id		= -1,
-+};
-+#endif
- 
- /* keyboard */
- 
-@@ -780,6 +789,9 @@
- #ifdef CONFIG_PXA_EZX_E680
- 	&e680led_device,
- #endif
-+#ifdef CONFIG_PXA_EZX_A780
-+	&a780led_device,
-+#endif
- };
- 
- static void __init
---- /dev/null	2006-06-05 13:59:28.329930680 +0200
-+++ linux-2.6.16/drivers/leds/leds-a780.c	2006-06-05 18:27:13.000000000 +0200
-@@ -0,0 +1,123 @@
-+/*
-+ * EZX Platform LED Driver for the Motorola A780 GSM Phone
-+ *
-+ * Copyright 2006 Vanille-Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * Based on keylight.c by Motorola and leds-corgi.c by Richard Purdie
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/arch/ezx-pcap.h>
-+
-+static void a780led_main_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	if ( value > 31 ) value = 31;
-+	printk( KERN_DEBUG "a780led_main_set: %d\n", value );
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL0, value & 0x01);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL1, value & 0x02);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL2, value & 0x04);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL3, value & 0x08);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL4, value & 0x10);
-+}
-+
-+static void a780led_aux_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	if ( value > 31 ) value = 31;
-+	printk( KERN_DEBUG "a780led_aux_set: %d\n", value );
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL0, value & 0x01);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL1, value & 0x02);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL2, value & 0x04);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL3, value & 0x08);
-+	ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL4, value & 0x10);
-+}
-+
-+static struct led_classdev a780_main_led = {
-+	.name			= "a780:main",
-+	.default_trigger	= "none",
-+	.brightness_set		= a780led_main_set,
-+};
-+
-+static struct led_classdev a780_aux_led = {
-+	.name			= "a780:aux",
-+	.default_trigger	= "none",
-+	.brightness_set		= a780led_aux_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int a780led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	led_classdev_suspend(&a780_main_led);
-+	led_classdev_suspend(&a780_aux_led);
-+	return 0;
-+}
-+
-+static int a780led_resume(struct platform_device *dev)
-+{
-+	led_classdev_resume(&a780_main_led);
-+	led_classdev_resume(&a780_aux_led);
-+	return 0;
-+}
-+#endif
-+
-+static int a780led_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &a780_main_led);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &a780_aux_led);
-+	if (ret < 0)
-+		led_classdev_unregister(&a780_main_led);
-+
-+	return ret;
-+}
-+
-+static int a780led_remove(struct platform_device *pdev)
-+{
-+	led_classdev_unregister(&a780_main_led);
-+	led_classdev_unregister(&a780_aux_led);
-+	return 0;
-+}
-+
-+static struct platform_driver a780led_driver = {
-+	.probe		= a780led_probe,
-+	.remove		= a780led_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= a780led_suspend,
-+	.resume		= a780led_resume,
-+#endif
-+	.driver		= {
-+		.name		= "a780-led",
-+	},
-+};
-+
-+static int __init a780led_init(void)
-+{
-+	return platform_driver_register(&a780led_driver);
-+}
-+
-+static void __exit a780led_exit(void)
-+{
-+	a780led_main_set( &a780_main_led, 0 );
-+	a780led_aux_set( &a780_aux_led, 0 );
-+	platform_driver_unregister(&a780led_driver);
-+}
-+
-+module_init(a780led_init);
-+module_exit(a780led_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Motorola A780 LED driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux-ezx/e680-disable-boomer-HACK.patch b/packages/linux/linux-ezx/e680-disable-boomer-HACK.patch
deleted file mode 100644
index a0d953ddfb..0000000000
--- a/packages/linux/linux-ezx/e680-disable-boomer-HACK.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/drivers/i2c/chips/Makefile~e680-disable-boomer	2006-05-31 18:52:44.000000000 +0200
-+++ linux-2.6.16/drivers/i2c/chips/Makefile	2006-05-31 18:56:38.000000000 +0200
-@@ -17,7 +17,7 @@
- 
- obj-$(CONFIG_I2C_ADCM2700)	+= e680_camera.o
- obj-$(CONFIG_I2C_A780_CAMERA)	+= a780_camera.o
--obj-$(CONFIG_PXA_EZX_E680)	+= boomer.o
-+//obj-$(CONFIG_PXA_EZX_E680)	+= boomer.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
diff --git a/packages/linux/linux-ezx/e680-fix-keypad.patch b/packages/linux/linux-ezx/e680-fix-keypad.patch
deleted file mode 100644
index ca06052803..0000000000
--- a/packages/linux/linux-ezx/e680-fix-keypad.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~e680-fix-keypad.patch	2006-06-11 00:47:33.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-12 16:13:28.000000000 +0200
-@@ -341,71 +341,25 @@
- };
- #endif
- 
--/* keyboard */
--
--#if defined(CONFIG_PXA_EZX_V700)
--#error "kbd matrix still needs to be converted to new row/col layout"
--static unsigned char ezx_keycode[] = {
--	/* col 0 */
--	KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT,
--	KEYPAD_POUND, KEY_0, KEY_9, 0,
--	/* col 1 */
--	KEY_2, KEY_4, KEY_6, KEY_8,
--	KEY_7, KEYPAD_SLEFT, KEYPAD_SRIGHT, 0,
--	/* col 2 */
--	KEY_MENU, KEY_1, KEY_3, KEY_5,
--	KEY_KPASTERISK, KEY_VOLUMEUP, KEY_VOLUMEDOWN, 0,
--	/* col 3 */
--	KEY_CAMERA, KEYPAD_CLEAR, KEYPAD_CARRIER, KEYPAD_ACTIVATE,
--	KEYPAD_SEND, KEYPAD_SMART, KEYPAD_VAVR, 0,
--};
--static unsigned char ezx_direct_keycode[] = {
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--};
--#elif defined(CONFIG_PXA_EZX_E680_P4A)
--#error "kbd matrix still needs to be converted to new row/col layout"
--static unsigned char ezx_keycode[] = {
--	/* col 0 */
--	KEY_UP, KEY_DOWN, KEY_LEFT, 0, 0, 0, 0, 0,
--	/* col 1 */
--	KEY_RIGHT, KEY_CENTER, KEY_HOME, 0, 0, 0, 0, 0,
--	/* col 2 */
--	KEYPAD_GAME_R, 0, KEYPAD_GAME_L, 0, 0, 0, 0, 0,
--	/* col 3 */
--	KEY_A, KEY_B, 0, 0, 0, 0, 0, 0,
--};
--static unsigned char ezx_direct_keycode[] = {
--	KEY_CAMERA,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEY_POWER,
--	KEYPAD_NONE,
--};
--#elif defined(CONFIG_PXA_EZX_E680)
--#error "kbd matrix still needs to be converted to new row/col layout"
-+/*
-+ * PXA Keyboard
-+ */
-+#if defined(CONFIG_PXA_EZX_E680)
- static unsigned char ezx_keycode[] = {
--	/* col 0 */
--	KEY_UP, KEY_DOWN, 0, 0, 0, 0, 0, 0,
--	/* col 1 */
--	KEY_RIGHT, KEY_LEFT, 0, 0, 0, 0, 0, 0,
--	/* col 2 */
--	0, KEYPAD_GAME_R, 0, 0, 0, 0, 0, 0,
--	/* col 3 */
--	KEYPAD_HOME, KEYPAD_GAME_L, KEYPAD_CENTER, 0, 0, 0, 0, 0,
-+	/* row 0 */
-+	KEY_UP, KEY_RIGHT, KEY_RESERVED, KEY_PHONE,
-+	/* row 1 */
-+	KEY_DOWN, KEY_LEFT, KEY_VOLUMEUP, KEY_VOLUMEDOWN,
-+	/* row 2 */
-+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPENTER,
- };
- static unsigned char ezx_direct_keycode[] = {
- 	KEY_CAMERA,
--	KEYPAD_NONE,
--	KEYPAD_NONE,
--	KEYPAD_A,
-+	KEY_RESERVED,
-+	KEY_RESERVED,
-+	KEY_HOME,
- 	KEY_POWER,
--	KEYPAD_B,
-+	KEY_MENU,
- };
- #elif defined(CONFIG_PXA_EZX_A780)
- static unsigned char ezx_keycode[] = {
-@@ -424,22 +378,12 @@
- 	KEY_CAMERA,
- };
- #else
--#error "no EZX subarchitecture defined !?!"
-+#error "no EZX subarchitecture defined"
- #endif
- 
- static int ezx_kbd_init(void)
- {
--#if defined(CONFIG_PXA_EZX_E680_P4A)
--	pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<0>, VR Key */
--	pxa_gpio_mode(97 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<4>, power key */
--	pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<0> */
--	pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<1> */
--	pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<2> */
--	pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
--	pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
--	pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
--	pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
--#elif defined(CONFIG_PXA_EZX_E680)
-+#if defined(CONFIG_PXA_EZX_E680)
- 	pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<0>, VR Key */
- 	pxa_gpio_mode(96 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<3>, GAME_A */
- 	pxa_gpio_mode(97 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<4>, power key */
-@@ -455,7 +399,7 @@
- 	GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
- 	GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
- 	PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
--#elif defined (CONFIG_PXA_EZX_A780)
-+#elif defined(CONFIG_PXA_EZX_A780)
- 	pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);   /* KP_DKIN<0>, voice_rec */
- 	pxa_gpio_mode(97 | GPIO_ALT_FN_3_IN);   /* KP_MKIN<3> */
- 	pxa_gpio_mode(98 | GPIO_ALT_FN_3_IN);   /* KP_MKIN<4> */
-@@ -476,10 +420,7 @@
- 	.scan_interval	= HZ/40,
- 	.matrix		= {
- 		.keycode = &ezx_keycode,
--#if defined(CONFIG_ARCH_EXZ_E680_P4A)
--		.cols	= 4,
--		.rows	= 3,
--#elif defined(CONFIG_PXA_EZX_E680)
-+#if defined(CONFIG_PXA_EZX_E680)
- 		.cols	= 4,
- 		.rows 	= 3,
- #elif defined(CONFIG_PXA_EZX_A780)
-@@ -489,10 +430,8 @@
- 	},
- 	.direct		= {
- 		.keycode = &ezx_direct_keycode,
--#if defined(CONFIG_PXA_EZX_E680_P4A)
--		.num	= 4,
--#elif defined(CONFIG_PXA_EZX_E680)
--		.num	= 5,
-+#if defined(CONFIG_PXA_EZX_E680)
-+		.num	= 6,
- #elif defined(CONFIG_PXA_EZX_A780)
- 		.num	= 1,
- #endif
diff --git a/packages/linux/linux-ezx/e680-leds-r0.patch b/packages/linux/linux-ezx/e680-leds-r0.patch
deleted file mode 100644
index b6d2413dc1..0000000000
--- a/packages/linux/linux-ezx/e680-leds-r0.patch
+++ /dev/null
@@ -1,336 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~led_ezx-r0.patch	2006-06-03 15:17:43.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-05 15:14:59.000000000 +0200
-@@ -357,6 +357,17 @@
- 	.num_resources	= ARRAY_SIZE(ezx_backlight_resources),
- };
- 
-+#ifdef CONFIG_PXA_EZX_E680
-+/*
-+ * E680 LEDs
-+ */
-+static struct platform_device e680led_device = {
-+	.name		= "e680-led",
-+	.id		= -1,
-+};
-+#endif
-+
-+
- /* keyboard */
- 
- #if defined(CONFIG_PXA_EZX_V700)
-@@ -770,6 +781,9 @@
- 
- static struct platform_device *devices[] __initdata = {
- 	&ezx_bp_device,
-+#ifdef CONFIG_PXA_EZX_E680
-+	&e680led_device,
-+#endif
- };
- 
- static void __init
---- linux-2.6.16/drivers/leds/Kconfig~led_ezx-r0.patch	2006-06-03 15:17:47.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Kconfig	2006-06-03 15:17:47.000000000 +0200
-@@ -59,6 +59,13 @@
- 	  This option enables support for the LEDs on Sharp Zaurus
- 	  SL-6000 series.
- 
-+config LEDS_E680
-+	tristate "LED Support for the Motorola E680(i) GSM Phone"
-+	depends LEDS_CLASS && PXA_EZX_E680
-+	help
-+	  This options enables support for the LEDs on the
-+	  Motorola E680(i) GSM Phone.
-+
- config LEDS_TRIGGER_TIMER
- 	tristate "LED Timer Trigger"
- 	depends LEDS_TRIGGERS
---- linux-2.6.16/drivers/leds/Makefile~led_ezx-r0.patch	2006-06-03 15:17:47.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Makefile	2006-06-03 15:17:47.000000000 +0200
-@@ -10,7 +10,8 @@
- obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
- obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
- obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
-+obj-$(CONFIG_LEDS_E680)		+= leds-e680.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
--obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-\ Kein Zeilenumbruch am Dateiende.
-+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
---- /dev/null	2006-06-05 13:59:28.329930680 +0200
-+++ linux-2.6.16/drivers/leds/leds-e680.c	2006-06-05 15:11:42.000000000 +0200
-@@ -0,0 +1,269 @@
-+/*
-+ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone
-+ *
-+ * Copyright 2006 Vanille-Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+//FIXME this belongs to somewhere else, please
-+//      adjust when ssp_pcap.h reached its final destination
-+#include "../misc/ezx/ssp_pcap.h"
-+
-+//FIXME move defines to header file
-+#define IND_CNTL_R_BUL 46
-+#define IND_CNTL_G_BUL 47
-+#define SSP_PCAP_LED_MASK  0x000fffe0
-+#define SSP_PCAP_LED_SHIFT 5
-+
-+static enum led_brightness old_red;
-+static enum led_brightness old_green;
-+static enum led_brightness old_blue;
-+
-+typedef struct {
-+	unsigned char ind_GPIO_red;    /*Indicator Red control GPIO 46: 0 active, 1 disactive*/
-+	unsigned char ind_GPIO_green;  /*Indicator Green control GPIO 47: 0 active, 1 disactive*/
-+	unsigned char pcap_LEDR_en;    /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/
-+	unsigned char pcap_LEDG_en;    /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/
-+	unsigned char pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/
-+	unsigned char pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/
-+	unsigned char pcap_LEDR_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/
-+	unsigned char pcap_LEDG_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/
-+	unsigned char pcap_SKIP_on;  /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/
-+} PCAP2_LED_REGISTER_VALUE;
-+
-+const PCAP2_LED_REGISTER_VALUE led_register_value[]=
-+{
-+  /*  on/off pulsepower  timing  intensity */
-+	{0x1,0x1, 0x0,0x0, 0x0,0x0, 0x0,0x0,0x0}, /* OFF */
-+	{0x0,0x1, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* RED */
-+	{0x1,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* GREEN */
-+	{0x0,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* ORANGE = RED + GREEN */
-+	{0x1,0x1, 0x0,0x1, 0x0,0xc, 0x0,0x0,0x0}, /* BLUE */
-+	{0x0,0x1, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_RED = RED + BLUE */
-+	{0x1,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_GREEN = GREEN + BLUE */
-+	{0x0,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* WHITE = RED + GREEN + BLUE */
-+};
-+
-+static void e680led_led_set( enum led_brightness red, enum led_brightness green, enum led_brightness blue )
-+{
-+	printk( KERN_DEBUG "e680led_led_set: red=%d, green=%d, blue=%d", red, green, blue );
-+	unsigned int tempValue = 0;
-+	unsigned int value = 0;
-+	unsigned int stateIndex = 0;
-+	unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ledg_ctrl, ledr_i, ledg_i,skip;
-+
-+	stateIndex = ( ( blue << 2 ) | ( green << 1 ) | ( red ) )   & 0x7;
-+	printk( KERN_DEBUG "LED stateIndex is %d", stateIndex );
-+	gpio_red   = led_register_value[stateIndex].ind_GPIO_red    & 0x1;
-+	gpio_green = led_register_value[stateIndex].ind_GPIO_green  & 0x1;
-+	ledr_en    = led_register_value[stateIndex].pcap_LEDR_en    & 0x1;
-+	ledg_en    = led_register_value[stateIndex].pcap_LEDG_en    & 0x1;
-+	ledr_ctrl  = led_register_value[stateIndex].pcap_LEDR_CTRL  & 0xf;
-+	ledg_ctrl  = led_register_value[stateIndex].pcap_LEDG_CTRL  & 0xf;
-+	ledr_i     = led_register_value[stateIndex].pcap_LEDR_I     & 0x3;
-+	ledg_i     = led_register_value[stateIndex].pcap_LEDG_I     & 0x3;
-+	skip       = led_register_value[stateIndex].pcap_SKIP_on    & 0x1;
-+
-+	/* disable LEDs */
-+	if( ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue) != SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_WARNING "LED PCAP Read Failed\n" );
-+		return;
-+	}
-+	tempValue &= (~SSP_PCAP_LED_MASK);
-+	if( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) != SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_WARNING "LED PCAP Write Failed (Clear Data)\n" );
-+		return;
-+	}
-+	
-+	/* configure GPIOs as output */
-+	pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT);
-+	pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT);
-+
-+	//FIXME: Simplify this logic
-+	if ( (gpio_green && gpio_red) )
-+	{
-+		/*Disable Red & Green signal*/
-+		set_GPIO(IND_CNTL_R_BUL); /*IND_CNTL_R_BUL Low active*/
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL);
-+		
-+		clr_GPIO(IND_CNTL_G_BUL); /*IND_CNTL_G_BUL High active*/
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL));
-+		
-+		printk( KERN_DEBUG "LED GPIO Green & Red Disable\n");
-+	} else if ( gpio_green && !gpio_red )
-+	{
-+		/*Green Disable, Red Enable*/
-+		clr_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL));
-+		
-+		clr_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL));
-+	
-+		printk( KERN_DEBUG "LED GPIO Green Disable, Red Enable\n");
-+	} else if (gpio_red && !gpio_green )
-+	{
-+		/*Red Disable, Green Enable*/
-+		set_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL);
-+		
-+		set_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL);
-+		printk( KERN_DEBUG "LED GPIO Red Disable, Green Enable");
-+	}else
-+	{
-+		/*Red & Green enable*/
-+		clr_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL));
-+		
-+		set_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL);
-+		printk( KERN_DEBUG "LED GPIO Red & Green Enable\n");
-+	}
-+	
-+	/* Write PCAP LED Peripheral Control Register*/
-+	value = ( ledr_en | (ledg_en <<1) | (ledr_ctrl <<2) | (ledg_ctrl <<6) |
-+		(ledr_i << 10) | (ledg_i <<12) | (skip <<14) ) & 0x7fff;
-+	tempValue |= (value <<SSP_PCAP_LED_SHIFT);
-+	
-+	if ( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) == SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_DEBUG "LED PCAP Write Success (0x%x :0x%x)\n",tempValue,value);
-+		old_red = red;
-+		old_green = green;
-+		old_blue = blue;
-+		return;
-+	} else {
-+		printk( KERN_DEBUG "LED PCAP Write Failed (State Change)\n");
-+		return;
-+	}
-+}
-+
-+static void e680led_red_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_red_set: %d\n", value );
-+	e680led_led_set( 1 && value, old_green, old_blue );
-+}
-+
-+static void e680led_green_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_green_set: %d\n", value );
-+	e680led_led_set( old_red, 1 && value, old_blue );
-+}
-+
-+static void e680led_blue_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_blue_set: %d\n", value );
-+	e680led_led_set( old_red, old_green, 1 && value );
-+}
-+
-+static struct led_classdev e680_red_led = {
-+	.name			= "e680:red",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_red_set,
-+};
-+
-+static struct led_classdev e680_green_led = {
-+	.name			= "e680:green",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_green_set,
-+};
-+
-+static struct led_classdev e680_blue_led = {
-+	.name			= "e680:blue",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_blue_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int e680led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	led_classdev_suspend(&e680_red_led);
-+	led_classdev_suspend(&e680_green_led);
-+	led_classdev_suspend(&e680_blue_led);
-+	return 0;
-+}
-+
-+static int e680led_resume(struct platform_device *dev)
-+{
-+	led_classdev_resume(&e680_red_led);
-+	led_classdev_resume(&e680_green_led);
-+	led_classdev_resume(&e680_blue_led);
-+	return 0;
-+}
-+#endif
-+
-+static int e680led_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_red_led);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_green_led);
-+	if (ret < 0)
-+		led_classdev_unregister(&e680_red_led);
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_blue_led);
-+	if (ret < 0) {
-+		led_classdev_unregister(&e680_red_led);
-+		led_classdev_unregister(&e680_green_led);
-+	}
-+	return ret;
-+}
-+
-+static int e680led_remove(struct platform_device *pdev)
-+{
-+	led_classdev_unregister(&e680_red_led);
-+	led_classdev_unregister(&e680_green_led);
-+	led_classdev_unregister(&e680_blue_led);
-+	return 0;
-+}
-+
-+static struct platform_driver e680led_driver = {
-+	.probe		= e680led_probe,
-+	.remove		= e680led_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= e680led_suspend,
-+	.resume		= e680led_resume,
-+#endif
-+	.driver		= {
-+		.name		= "e680-led",
-+	},
-+};
-+
-+static int __init e680led_init(void)
-+{
-+	return platform_driver_register(&e680led_driver);
-+}
-+
-+static void __exit e680led_exit(void)
-+{
-+	e680led_led_set( 0, 0, 0 );
-+	platform_driver_unregister(&e680led_driver);
-+}
-+
-+module_init(e680led_init);
-+module_exit(e680led_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Motorola E680 LED driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux-ezx/e680-leds-r1.patch b/packages/linux/linux-ezx/e680-leds-r1.patch
deleted file mode 100644
index abbab2937d..0000000000
--- a/packages/linux/linux-ezx/e680-leds-r1.patch
+++ /dev/null
@@ -1,374 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~e680-leds-r0.patch	2006-06-06 17:14:06.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-06 17:23:14.000000000 +0200
-@@ -357,6 +357,17 @@
- 	.num_resources	= ARRAY_SIZE(ezx_backlight_resources),
- };
- 
-+#ifdef CONFIG_PXA_EZX_E680
-+/*
-+ * E680 LEDs
-+ */
-+static struct platform_device e680led_device = {
-+	.name		= "e680-led",
-+	.id		= -1,
-+};
-+#endif
-+
-+
- /* keyboard */
- 
- #if defined(CONFIG_PXA_EZX_V700)
-@@ -766,6 +777,9 @@
- 
- static struct platform_device *devices[] __initdata = {
- 	&ezx_bp_device,
-+#ifdef CONFIG_PXA_EZX_E680
-+	&e680led_device,
-+#endif
- };
- 
- static void __init
---- linux-2.6.16/drivers/leds/Kconfig~e680-leds-r0.patch	2006-06-06 17:14:05.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Kconfig	2006-06-06 17:23:14.000000000 +0200
-@@ -59,6 +59,13 @@
- 	  This option enables support for the LEDs on Sharp Zaurus
- 	  SL-6000 series.
- 
-+config LEDS_E680
-+	tristate "LED Support for the Motorola E680(i) GSM Phone"
-+	depends LEDS_CLASS && PXA_EZX_E680
-+	help
-+	  This options enables support for the LEDs on the
-+	  Motorola E680(i) GSM Phone.
-+
- config LEDS_TRIGGER_TIMER
- 	tristate "LED Timer Trigger"
- 	depends LEDS_TRIGGERS
---- linux-2.6.16/drivers/leds/Makefile~e680-leds-r0.patch	2006-06-06 17:14:05.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Makefile	2006-06-06 17:23:14.000000000 +0200
-@@ -10,7 +10,8 @@
- obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
- obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
- obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
-+obj-$(CONFIG_LEDS_E680)		+= leds-e680.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
--obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-\ Kein Zeilenumbruch am Dateiende.
-+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
---- /dev/null	2006-06-06 16:58:36.577045136 +0200
-+++ linux-2.6.16/drivers/leds/leds-e680.c	2006-06-06 17:55:46.000000000 +0200
-@@ -0,0 +1,307 @@
-+/*
-+ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone
-+ *
-+ * Copyright 2006 Vanille-Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+
-+//FIXME move defines to a common header file
-+#define IND_CNTL_R_BUL     46
-+#define IND_CNTL_G_BUL     47
-+#define SSP_PCAP_LED_MASK  0x000fffe0
-+#define SSP_PCAP_LED_SHIFT 5
-+#define GPIO_TC_MM_EN      99
-+
-+static enum led_brightness old_red;
-+static enum led_brightness old_green;
-+static enum led_brightness old_blue;
-+
-+typedef struct {
-+	unsigned char ind_GPIO_red;    /*Indicator Red control GPIO 46: 0 active, 1 disactive*/
-+	unsigned char ind_GPIO_green;  /*Indicator Green control GPIO 47: 0 active, 1 disactive*/
-+	unsigned char pcap_LEDR_en;    /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/
-+	unsigned char pcap_LEDG_en;    /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/
-+	unsigned char pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/
-+	unsigned char pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/
-+	unsigned char pcap_LEDR_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/
-+	unsigned char pcap_LEDG_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/
-+	unsigned char pcap_SKIP_on;  /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/
-+} PCAP2_LED_REGISTER_VALUE;
-+
-+const PCAP2_LED_REGISTER_VALUE led_register_value[]=
-+{
-+  /*  on/off pulsepower  timing  intensity */
-+	{0x1,0x1, 0x0,0x0, 0x0,0x0, 0x0,0x0,0x0}, /* OFF */
-+	{0x0,0x1, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* RED */
-+	{0x1,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* GREEN */
-+	{0x0,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* ORANGE = RED + GREEN */
-+	{0x1,0x1, 0x0,0x1, 0x0,0xc, 0x0,0x0,0x0}, /* BLUE */
-+	{0x0,0x1, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_RED = RED + BLUE */
-+	{0x1,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_GREEN = GREEN + BLUE */
-+	{0x0,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* WHITE = RED + GREEN + BLUE */
-+};
-+
-+static void e680led_led_set( enum led_brightness red, enum led_brightness green, enum led_brightness blue )
-+{
-+	printk( KERN_DEBUG "e680led_led_set: red=%d, green=%d, blue=%d", red, green, blue );
-+	unsigned int tempValue = 0;
-+	unsigned int value = 0;
-+	unsigned int stateIndex = 0;
-+	unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ledg_ctrl, ledr_i, ledg_i,skip;
-+
-+	stateIndex = ( ( blue << 2 ) | ( green << 1 ) | ( red ) )   & 0x7;
-+	printk( KERN_DEBUG "LED stateIndex is %d", stateIndex );
-+	gpio_red   = led_register_value[stateIndex].ind_GPIO_red    & 0x1;
-+	gpio_green = led_register_value[stateIndex].ind_GPIO_green  & 0x1;
-+	ledr_en    = led_register_value[stateIndex].pcap_LEDR_en    & 0x1;
-+	ledg_en    = led_register_value[stateIndex].pcap_LEDG_en    & 0x1;
-+	ledr_ctrl  = led_register_value[stateIndex].pcap_LEDR_CTRL  & 0xf;
-+	ledg_ctrl  = led_register_value[stateIndex].pcap_LEDG_CTRL  & 0xf;
-+	ledr_i     = led_register_value[stateIndex].pcap_LEDR_I     & 0x3;
-+	ledg_i     = led_register_value[stateIndex].pcap_LEDG_I     & 0x3;
-+	skip       = led_register_value[stateIndex].pcap_SKIP_on    & 0x1;
-+
-+	/* disable LEDs */
-+	if( ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue) != SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_WARNING "LED PCAP Read Failed\n" );
-+		return;
-+	}
-+	tempValue &= (~SSP_PCAP_LED_MASK);
-+	if( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) != SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_WARNING "LED PCAP Write Failed (Clear Data)\n" );
-+		return;
-+	}
-+	
-+	/* configure GPIOs as output */
-+	pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT);
-+	pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT);
-+
-+	//FIXME: Simplify this logic
-+	if ( (gpio_green && gpio_red) )
-+	{
-+		/*Disable Red & Green signal*/
-+		set_GPIO(IND_CNTL_R_BUL); /*IND_CNTL_R_BUL Low active*/
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL);
-+		
-+		clr_GPIO(IND_CNTL_G_BUL); /*IND_CNTL_G_BUL High active*/
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL));
-+		
-+		printk( KERN_DEBUG "LED GPIO Green & Red Disable\n");
-+	} else if ( gpio_green && !gpio_red )
-+	{
-+		/*Green Disable, Red Enable*/
-+		clr_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL));
-+		
-+		clr_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL));
-+	
-+		printk( KERN_DEBUG "LED GPIO Green Disable, Red Enable\n");
-+	} else if (gpio_red && !gpio_green )
-+	{
-+		/*Red Disable, Green Enable*/
-+		set_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL);
-+		
-+		set_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL);
-+		printk( KERN_DEBUG "LED GPIO Red Disable, Green Enable");
-+	}else
-+	{
-+		/*Red & Green enable*/
-+		clr_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL));
-+		
-+		set_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL);
-+		printk( KERN_DEBUG "LED GPIO Red & Green Enable\n");
-+	}
-+	
-+	/* Write PCAP LED Peripheral Control Register*/
-+	value = ( ledr_en | (ledg_en <<1) | (ledr_ctrl <<2) | (ledg_ctrl <<6) |
-+		(ledr_i << 10) | (ledg_i <<12) | (skip <<14) ) & 0x7fff;
-+	tempValue |= (value <<SSP_PCAP_LED_SHIFT);
-+	
-+	if ( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) == SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_DEBUG "LED PCAP Write Success (0x%x :0x%x)\n",tempValue,value);
-+		old_red = red;
-+		old_green = green;
-+		old_blue = blue;
-+		return;
-+	} else {
-+		printk( KERN_DEBUG "LED PCAP Write Failed (State Change)\n");
-+		return;
-+	}
-+}
-+
-+static void e680led_red_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_red_set: %d\n", value );
-+	e680led_led_set( 1 && value, old_green, old_blue );
-+}
-+
-+static void e680led_green_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_green_set: %d\n", value );
-+	e680led_led_set( old_red, 1 && value, old_blue );
-+}
-+
-+static void e680led_blue_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_blue_set: %d\n", value );
-+	e680led_led_set( old_red, old_green, 1 && value );
-+}
-+
-+static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	/* this is not working yet, as there is something else missing */
-+#if 0
-+	printk( KERN_DEBUG "e680led_keypad_set: %d\n", value );
-+
-+	pxa_gpio_mode(GPIO_TC_MM_EN);
-+	GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
-+	GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+
-+	udelay( 100 );
-+
-+    if ( value ) {
-+		GPCR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+		PGSR3 &= ~GPIO_bit(GPIO_TC_MM_EN);
-+    } else {
-+		GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+		PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
-+    }
-+#endif
-+}
-+
-+static struct led_classdev e680_red_led = {
-+	.name			= "e680:red",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_red_set,
-+};
-+
-+static struct led_classdev e680_green_led = {
-+	.name			= "e680:green",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_green_set,
-+};
-+
-+static struct led_classdev e680_blue_led = {
-+	.name			= "e680:blue",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_blue_set,
-+};
-+
-+static struct led_classdev e680_keypad_led = {
-+	.name			= "e680:keypad",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_keypad_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int e680led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	led_classdev_suspend(&e680_red_led);
-+	led_classdev_suspend(&e680_green_led);
-+	led_classdev_suspend(&e680_blue_led);
-+	led_classdev_suspend(&e680_keypad_led);
-+	return 0;
-+}
-+
-+static int e680led_resume(struct platform_device *dev)
-+{
-+	led_classdev_resume(&e680_red_led);
-+	led_classdev_resume(&e680_green_led);
-+	led_classdev_resume(&e680_blue_led);
-+	led_classdev_resume(&e680_keypad_led);
-+	return 0;
-+}
-+#endif
-+
-+static int e680led_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_red_led);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_green_led);
-+	if (ret < 0)
-+		led_classdev_unregister(&e680_red_led);
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_blue_led);
-+	if (ret < 0) {
-+		led_classdev_unregister(&e680_red_led);
-+		led_classdev_unregister(&e680_green_led);
-+	}
-+	
-+	ret = led_classdev_register(&pdev->dev, &e680_keypad_led);
-+	if (ret < 0) {
-+		led_classdev_unregister(&e680_red_led);
-+		led_classdev_unregister(&e680_green_led);
-+		led_classdev_unregister(&e680_blue_led);
-+	}
-+	return ret;
-+}
-+
-+static int e680led_remove(struct platform_device *pdev)
-+{
-+	led_classdev_unregister(&e680_red_led);
-+	led_classdev_unregister(&e680_green_led);
-+	led_classdev_unregister(&e680_blue_led);
-+	led_classdev_unregister(&e680_keypad_led);
-+	return 0;
-+}
-+
-+static struct platform_driver e680led_driver = {
-+	.probe		= e680led_probe,
-+	.remove		= e680led_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= e680led_suspend,
-+	.resume		= e680led_resume,
-+#endif
-+	.driver		= {
-+		.name		= "e680-led",
-+	},
-+};
-+
-+static int __init e680led_init(void)
-+{
-+	return platform_driver_register(&e680led_driver);
-+}
-+
-+static void __exit e680led_exit(void)
-+{
-+	e680led_led_set( 0, 0, 0 );
-+	platform_driver_unregister(&e680led_driver);
-+}
-+
-+module_init(e680led_init);
-+module_exit(e680led_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Motorola E680 LED driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux-ezx/ezx-backlight-r0.patch b/packages/linux/linux-ezx/ezx-backlight-r0.patch
deleted file mode 100644
index db917300c2..0000000000
--- a/packages/linux/linux-ezx/ezx-backlight-r0.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~ezx-backlight-r0.patch	2006-06-07 16:00:29.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-07 16:21:09.000000000 +0200
-@@ -344,17 +344,12 @@
- 	.pxafb_lcd_power	= &pxafb_lcd_power,
- };
- 
--
--/* backlight for lcd */
--
--static struct resource ezx_backlight_resources[] = {
--};
--
--static struct platform_device ezx_backlight_device = {
--	.name		= "ezx-lcd-backlight",
-+/*
-+ * EZX LCD Backlight
-+ */
-+static struct platform_device ezxbacklight_device = {
-+	.name		= "ezx-bl",
- 	.id		= -1,
--	.resource	= ezx_backlight_resources,
--	.num_resources	= ARRAY_SIZE(ezx_backlight_resources),
- };
- 
- #ifdef CONFIG_PXA_EZX_E680
-@@ -786,6 +781,7 @@
- 
- static struct platform_device *devices[] __initdata = {
- 	&ezx_bp_device,
-+	&ezxbacklight_device,
- #ifdef CONFIG_PXA_EZX_E680
- 	&e680led_device,
- #endif
---- linux-2.6.16/drivers/video/backlight/Kconfig~ezx-backlight-r0.patch	2006-06-07 16:00:28.000000000 +0200
-+++ linux-2.6.16/drivers/video/backlight/Kconfig	2006-06-07 16:00:30.000000000 +0200
-@@ -58,3 +58,12 @@
- 	  If you have a HP Jornada 680, say y to enable the
- 	  backlight driver.
- 
-+config BACKLIGHT_EZX
-+	tristate "Motorola EXZ Backlight Driver (A780/E680/E680i)"
-+	depends on BACKLIGHT_DEVICE && PXA_EZX
-+	default y
-+	help
-+	  If you have a Motorola A780 or E680(i), say y to enable the
-+	  backlight driver.
-+
-+
---- linux-2.6.16/drivers/video/backlight/Makefile~ezx-backlight-r0.patch	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16/drivers/video/backlight/Makefile	2006-06-07 16:00:30.000000000 +0200
-@@ -5,3 +5,5 @@
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
- obj-$(CONFIG_SHARP_LOCOMO)	+= locomolcd.o
-+obj-$(CONFIG_BACKLIGHT_EZX)	+= ezx_bl.o
-+
---- /dev/null	2006-06-07 15:54:31.503752232 +0200
-+++ linux-2.6.16/drivers/video/backlight/ezx_bl.c	2006-06-07 16:51:14.000000000 +0200
-@@ -0,0 +1,148 @@
-+/*
-+ * Backlight Driver for Motorola A780 and E680(i) GSM Phones.
-+ *
-+ * Copyright 2006 Vanille Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx.h>
-+
-+#define EZX_MAX_INTENSITY      50
-+#define EZX_DEFAULT_INTENSITY  25
-+
-+static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
-+static struct backlight_properties ezxbl_data;
-+static struct backlight_device *ezx_backlight_device;
-+static int current_intensity;
-+
-+static int ezx_send_intensity(struct backlight_device *bd)
-+{
-+	unsigned long flags;
-+	int intensity = bd->props->brightness;
-+
-+	printk( KERN_DEBUG "ezx_set_intensity to %d", intensity );
-+
-+	if (bd->props->power != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+	if (bd->props->fb_blank != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+
-+	spin_lock_irqsave(&bl_lock, flags);
-+
-+	PWM_CTRL0 = 2; /* pre-scaler */
-+	PWM_PWDUTY0 = intensity; /* duty cycle */
-+	PWM_PERVAL0 = 49; /* period */
-+
-+	if (intensity) {
-+			//pxa_set_cken(CKEN0_PWM0, 1);
-+			//FIXME: Set PWM0 GPIO as output
-+	} else {
-+			//pxa_set_cken(CKEN0_PWM0, 0);
-+			//FIXME: Set PWM0 GPIO as input
-+	}
-+
-+	spin_unlock_irqrestore(&bl_lock, flags);
-+	current_intensity = intensity;
-+	return 0;
-+}
-+
-+static int ezx_get_intensity(struct backlight_device *bd)
-+{
-+	return current_intensity;
-+}
-+
-+static int ezx_set_intensity(struct backlight_device *bd)
-+{
-+	return ezx_send_intensity(ezx_backlight_device);
-+}
-+
-+#ifdef CONFIG_PM
-+static int ezx_bl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	//set suspend flag
-+	ezx_set_intensity(ezx_backlight_device);
-+	return 0;
-+}
-+
-+static int ezx_bl_resume(struct platform_device *pdev)
-+{
-+	// set resume flag
-+	ezx_set_intensity(ezx_backlight_device);
-+	return 0;
-+}
-+#else
-+#define ezx_bl_suspend	NULL
-+#define ezx_bl_resume	NULL
-+#endif
-+
-+static struct backlight_properties ezx_bl_data = {
-+	.owner          = THIS_MODULE,
-+	.get_brightness = ezx_get_intensity,
-+	.max_brightness = EZX_MAX_INTENSITY,
-+	.update_status	= ezx_set_intensity,
-+};
-+
-+static int __init ezx_bl_probe(struct platform_device *pdev)
-+{
-+	ezx_backlight_device = backlight_device_register ("ezx-bl",
-+		NULL, &ezx_bl_data);
-+	if (IS_ERR (ezx_backlight_device))
-+		return PTR_ERR (ezx_backlight_device);
-+
-+	//ezx_bl_data.requested_brightness = EZX_DEFAULT_INTENSITY;
-+	//ezx_bl_data.requested_power = FB_BLANK_UNBLANK;
-+	//ezx_set_intensity(ezx_backlight_device, ezx_bl_data.requested_brightness);
-+
-+	printk("EZX Backlight Driver Initialized.\n");
-+	return 0;
-+}
-+
-+static int ezx_bl_remove(struct platform_device *pdev)
-+{
-+	backlight_device_unregister(ezx_backlight_device);
-+
-+	printk("EZX Backlight Driver Unloaded.\n");
-+	return 0;
-+}
-+
-+static struct platform_driver ezx_bl_driver = {
-+	.probe		= ezx_bl_probe,
-+	.remove		= ezx_bl_remove,
-+	.suspend	= ezx_bl_suspend,
-+	.resume		= ezx_bl_resume,
-+	.driver		= {
-+		.name		= "ezx-bl",
-+	},
-+};
-+
-+static int __init ezx_bl_init(void)
-+{
-+	return platform_driver_register(&ezx_bl_driver);
-+}
-+
-+static void __exit ezx_bl_exit(void)
-+{
-+ 	platform_driver_unregister(&ezx_bl_driver);
-+}
-+
-+module_init(ezx_bl_init);
-+module_exit(ezx_bl_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Backlight Driver for Motorola A780|E680(i)");
-+MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux-ezx/ezx-backlight-r1.patch b/packages/linux/linux-ezx/ezx-backlight-r1.patch
deleted file mode 100644
index a277f19344..0000000000
--- a/packages/linux/linux-ezx/ezx-backlight-r1.patch
+++ /dev/null
@@ -1,277 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~ezx-backlight-r1.patch	2006-06-08 19:33:36.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-08 19:33:37.000000000 +0200
-@@ -274,34 +274,9 @@
- 	.udc_command		= ezx_udc_command,
- };
- 
--/* pxafb */
--
--#define BKLIGHT_PRESCALE	2
--#define BKLIGHT_PERIOD		49
--#define DEFAULT_DUTYCYCLE	25
--#define MAX_DUTYCYCLE		(BKLIGHT_PERIOD+1)
--#define MIN_DUTYCYCLE		0
--
--static void pxafb_backlight_power(int on)
--{
--	if (on) {
--		CKEN |= CKEN0_PWM0;
--		PWM_CTRL0 = BKLIGHT_PRESCALE;
--		PWM_PERVAL0 = BKLIGHT_PERIOD;
--		PWM_PWDUTY0 = DEFAULT_DUTYCYCLE;
--
--		GPDR0 |= 0x00010000; //PWM0 is GPIO16
--		pxa_gpio_mode(GPIO16_PWM0_MD);
--	} else {
--		PWM_PWDUTY0 = 0;
--		GAFR0_U &= 0xfffffffc;
--		GPDR0 &= 0xfffeffff; /* set gpio16 (pwm0) as input */
--		CKEN &= ~CKEN0_PWM0;
--		PWM_PWDUTY0 = MIN_DUTYCYCLE;
--	}
--}
--
--//#define mdelay(x) udelay((x)*1000)
-+/*
-+ * EZX PXA Framebuffer
-+ */
- 
- static void pxafb_lcd_power(int on)
- {
-@@ -326,35 +301,24 @@
- 	.xres		= 240,
- 	.yres		= 320,
- 	.bpp		= 16,
--
- 	.hsync_len	= 10,
- 	.left_margin	= 20,
- 	.right_margin	= 10,
--
- 	.vsync_len	= 2,
- 	.upper_margin	= 3,
- 	.lower_margin	= 2,
--
- 	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
--
- 	.lccr0		= 0x002008F8,
- 	.lccr3		= 0x0430FF09,
--
--	.pxafb_backlight_power	= &pxafb_backlight_power,
--	.pxafb_lcd_power	= &pxafb_lcd_power,
--};
--
--
--/* backlight for lcd */
--
--static struct resource ezx_backlight_resources[] = {
-+	.pxafb_lcd_power= &pxafb_lcd_power,
- };
- 
--static struct platform_device ezx_backlight_device = {
--	.name		= "ezx-lcd-backlight",
-+/*
-+ * EZX LCD Backlight
-+ */
-+static struct platform_device ezxbacklight_device = {
-+	.name		= "ezx-bl",
- 	.id		= -1,
--	.resource	= ezx_backlight_resources,
--	.num_resources	= ARRAY_SIZE(ezx_backlight_resources),
- };
- 
- #ifdef CONFIG_PXA_EZX_E680
-@@ -786,6 +750,7 @@
- 
- static struct platform_device *devices[] __initdata = {
- 	&ezx_bp_device,
-+	&ezxbacklight_device,
- #ifdef CONFIG_PXA_EZX_E680
- 	&e680led_device,
- #endif
---- linux-2.6.16/drivers/video/backlight/Kconfig~ezx-backlight-r1.patch	2006-06-08 19:33:34.000000000 +0200
-+++ linux-2.6.16/drivers/video/backlight/Kconfig	2006-06-08 19:33:37.000000000 +0200
-@@ -58,3 +58,12 @@
- 	  If you have a HP Jornada 680, say y to enable the
- 	  backlight driver.
- 
-+config BACKLIGHT_EZX
-+	tristate "Motorola EXZ Backlight Driver (A780/E680/E680i)"
-+	depends on BACKLIGHT_DEVICE && PXA_EZX
-+	default y
-+	help
-+	  If you have a Motorola A780 or E680(i), say y to enable the
-+	  backlight driver.
-+
-+
---- linux-2.6.16/drivers/video/backlight/Makefile~ezx-backlight-r1.patch	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16/drivers/video/backlight/Makefile	2006-06-08 19:33:37.000000000 +0200
-@@ -5,3 +5,5 @@
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
- obj-$(CONFIG_SHARP_LOCOMO)	+= locomolcd.o
-+obj-$(CONFIG_BACKLIGHT_EZX)	+= ezx_bl.o
-+
---- /dev/null	2006-06-08 19:04:31.354926880 +0200
-+++ linux-2.6.16/drivers/video/backlight/ezx_bl.c	2006-06-08 20:52:33.000000000 +0200
-@@ -0,0 +1,156 @@
-+/*
-+ * Backlight Driver for Motorola A780 and E680(i) GSM Phones.
-+ *
-+ * Copyright 2006 Vanille Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx.h>
-+
-+#define EZX_MIN_INTENSITY      00
-+#define EZX_MAX_INTENSITY      50
-+#define EZX_DEFAULT_INTENSITY  25
-+
-+static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
-+static struct backlight_device *ezx_backlight_device;
-+static int last_intensity;
-+
-+static int ezxbl_send_intensity(struct backlight_device *bd)
-+{
-+	unsigned long flags;
-+	int intensity = bd->props->brightness;
-+
-+	printk( KERN_DEBUG "ezx_set_intensity to %d\n", intensity );
-+
-+	if (bd->props->power != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+	if (bd->props->fb_blank != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+
-+	spin_lock_irqsave(&bl_lock, flags);
-+
-+	printk( KERN_DEBUG "backlight last intensity was %d, new intensity is %d\n", last_intensity, intensity );
-+	
-+	if ( !last_intensity && intensity ) {
-+		printk( KERN_DEBUG "backlight power ON\n" );
-+		PWM_CTRL0 = 2; /* pre-scaler */
-+		PWM_PWDUTY0 = intensity; /* duty cycle */
-+		PWM_PERVAL0 = 49; /* period */
-+		pxa_gpio_mode(GPIO16_PWM0_MD); /* set GPIO16 as alternate function + output */
-+		pxa_set_cken(CKEN0_PWM0, 1); /* clock enable */
-+	}
-+	else if ( last_intensity && !intensity ) {
-+		printk( KERN_DEBUG "backlight power OFF\n" );
-+		PWM_PWDUTY0 = 0;
-+		GAFR0_U &= 0xFFFFFFFC; /* ??? */
-+		pxa_set_cken(CKEN0_PWM0, 0); /* clock disable */
-+		pxa_gpio_mode(GPIO16_PWM0); /* set GPIO16 as input */
-+	} else if ( last_intensity && intensity ) {
-+		printk( KERN_DEBUG "backlight adjusting duty cycle\n" );
-+		PWM_PWDUTY0 = intensity; /* duty cycle */
-+	}
-+	spin_unlock_irqrestore(&bl_lock, flags);
-+	last_intensity = intensity;
-+	return 0;
-+}
-+
-+static int ezxbl_get_intensity(struct backlight_device *bd)
-+{
-+	return last_intensity;
-+}
-+
-+static int ezxbl_set_intensity(struct backlight_device *bd)
-+{
-+	return ezxbl_send_intensity(ezx_backlight_device);
-+}
-+
-+#ifdef CONFIG_PM
-+static int ezxbl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	//set suspend flag
-+	ezxbl_set_intensity(ezx_backlight_device);
-+	return 0;
-+}
-+
-+static int ezxbl_resume(struct platform_device *pdev)
-+{
-+	// set resume flag
-+	ezxbl_set_intensity(ezx_backlight_device);
-+	return 0;
-+}
-+#else
-+#define ezxbl_suspend	NULL
-+#define ezxbl_resume	NULL
-+#endif
-+
-+static struct backlight_properties ezxbl_data = {
-+	.owner          = THIS_MODULE,
-+	.get_brightness = ezxbl_get_intensity,
-+	.max_brightness = EZX_MAX_INTENSITY,
-+	.update_status	= ezxbl_set_intensity,
-+};
-+
-+static int __init ezxbl_probe(struct platform_device *pdev)
-+{
-+	ezx_backlight_device = backlight_device_register ("ezx-bl",
-+		NULL, &ezxbl_data);
-+	if (IS_ERR (ezx_backlight_device))
-+		return PTR_ERR (ezx_backlight_device);
-+
-+	ezxbl_data.power = FB_BLANK_UNBLANK;
-+	ezxbl_data.brightness = EZX_DEFAULT_INTENSITY;
-+	ezxbl_set_intensity(ezx_backlight_device);
-+
-+	printk("EZX Backlight Driver Initialized.\n");
-+	return 0;
-+}
-+
-+static int ezxbl_remove(struct platform_device *pdev)
-+{
-+	backlight_device_unregister(ezx_backlight_device);
-+
-+	printk("EZX Backlight Driver Unloaded.\n");
-+	return 0;
-+}
-+
-+static struct platform_driver ezxbl_driver = {
-+	.probe		= ezxbl_probe,
-+	.remove		= ezxbl_remove,
-+	.suspend	= ezxbl_suspend,
-+	.resume		= ezxbl_resume,
-+	.driver		= {
-+		.name		= "ezx-bl",
-+	},
-+};
-+
-+static int __init ezxbl_init(void)
-+{
-+	return platform_driver_register(&ezxbl_driver);
-+}
-+
-+static void __exit ezxbl_exit(void)
-+{
-+ 	platform_driver_unregister(&ezxbl_driver);
-+}
-+
-+module_init(ezxbl_init);
-+module_exit(ezxbl_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Backlight Driver for Motorola A780|E680(i)");
-+MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux-ezx/pxakbd-fix-directkeys.patch b/packages/linux/linux-ezx/pxakbd-fix-directkeys.patch
deleted file mode 100644
index 1dedb981bd..0000000000
--- a/packages/linux/linux-ezx/pxakbd-fix-directkeys.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/drivers/input/keyboard/pxakbd.c~pxakbd-fix-directkeys.patch	2006-06-11 00:47:25.000000000 +0200
-+++ linux-2.6.16/drivers/input/keyboard/pxakbd.c	2006-06-12 16:10:03.000000000 +0200
-@@ -20,7 +20,7 @@
- #include <asm/arch/irqs.h>
- #include <asm/arch/pxa-regs.h>
- 
--#if 0
-+#if 1
- #define DEBUGP(x, args ...) printk(x, ## args)
- #else
- #define DEBUGP(x, args ...)
-@@ -44,8 +44,7 @@
- 	unsigned int i;
- 	int num_pressed = 0;
- 
--	kpdk = KPDK & 0x0000000f;
--
-+	kpdk = KPDK & 0x000000ff;
- 	for (i = 0; i < pxakbd->pd->direct.num; i++) {
- 		int pressed = 0;
- 
-@@ -54,11 +53,12 @@
- 			num_pressed++;
- 			DEBUGP("pxakbd: pressed: direct %u\n", i);
- 		}
--
--		input_report_key(pxakbd->input, pxakbd->pd->direct.keycode[i],
--				 pressed);
-+		if (pxakbd->pd->direct.keycode[i] != KEY_RESERVED) {
-+			DEBUGP( "pxakbd: sending to input layer: keycode = %d, pressed = %d\n", pxakbd->pd->direct.keycode[i], pressed );
-+			input_report_key(pxakbd->input, pxakbd->pd->direct.keycode[i],
-+			pressed);
-+		}
- 	}
--
- 	return num_pressed;
- }
- 
-@@ -248,16 +248,6 @@
- 		set_bit(pxakbd->pd->matrix.keycode[i], input_dev->keybit);
- 	clear_bit(0, input_dev->keybit);
- 
--#if 0
--	input_dev2->evbit[0] = ;
--	input_dev2->keycode = pxakbd->pd->direct.keycode;
--	input_dev2->keycodesize = sizeof(unsigned char);
--	input_dev2->keycodemax = pxakbd->pd->direct.num;
--
--	for (i = 0; i < input_dev2->keycodemax; i++)
--		set_bit(ezxkbd->keycode[i], input_dev2->keybit);
--#endif
--
- 	if (request_irq(pxakbd->irq, pxakbd_interrupt, 0, "pxakbd", pxakbd)) {
- 		printk(KERN_ERR "pxakbd: can't request irq %d\n", pxakbd->irq);
- 		ret = -EBUSY;
-@@ -279,6 +269,7 @@
- 		KPC_ME | KPC_DE |   /* matrix and direct keypad enabled */
- 		((pxakbd->pd->matrix.cols-1)<<23) | /* columns */
- 		((pxakbd->pd->matrix.rows-1)<<26) | /* rows */
-+		((pxakbd->pd->direct.num-1)<<6) | /* direct keys */
- 		KPC_MS_ALL); /* scan all columns */
- 
- 	pxa_set_cken(CKEN19_KEYPAD, 1);
-@@ -375,13 +366,11 @@
- static int pxakbd_remove(struct platform_device *pdev)
- {
- 	struct pxakbd *pxakbd = platform_get_drvdata(pdev);
--
-+	input_unregister_device(pxakbd->input);
- 	platform_set_drvdata(pdev, NULL);
- 	release_resource(pxakbd->res);
- 	free_irq(pxakbd->irq, pxakbd);
--	input_unregister_device(pxakbd->input);
- 	kfree(pxakbd);
--
- 	return 0;
- }
- 
diff --git a/packages/linux/linux-ezx/touchscreen-fix-r0.patch b/packages/linux/linux-ezx/touchscreen-fix-r0.patch
deleted file mode 100644
index 7d19a887fc..0000000000
--- a/packages/linux/linux-ezx/touchscreen-fix-r0.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/drivers/input/touchscreen/pcap_ts.c~touchscreen-fix-r0	2006-05-30 23:18:22.000000000 +0200
-+++ linux-2.6.16/drivers/input/touchscreen/pcap_ts.c	2006-05-30 23:29:34.000000000 +0200
-@@ -126,10 +126,7 @@
- 	if (ret < 0)
- 		return ret;
- 
--	if (tmp & 0x00400000)
--		return -EIO;
--
--	if (pcap_ts->read_state == COORDINATE) {
-+	if (pcap_ts->read_state == COORDINATE && !(tmp & 0x00400000)) {
- 		pcap_ts->x = (tmp & SSP_PCAP_ADD1_VALUE_MASK);
- 		pcap_ts->y = (tmp & SSP_PCAP_ADD2_VALUE_MASK)
- 						>>SSP_PCAP_ADD2_VALUE_SHIFT;