linux: some more patches for the ts72xx. Closes 3906.

* commit by Laibsch and reviewed by RP

3 files changed, 768 insertions, 0 deletions

diff --git a/packages/linux/linux-2.6.24/ts72xx/ep93xx-eth-phylib-framework.patch b/packages/linux/linux-2.6.24/ts72xx/ep93xx-eth-phylib-framework.patch
new file mode 100644
index 0000000000..3f25f308cd
--- /dev/null
+++ b/packages/linux/linux-2.6.24/ts72xx/ep93xx-eth-phylib-framework.patch
@@ -0,0 +1,548 @@
+Currently, the ep93xx_eth driver doesn't care about the PHY state,
+but it should, in order to tell the MAC when full duplex operation is
+required; failure to do so causes degraded performance on full duplex
+links. This patch implements proper PHY handling via the phylib framework:
+
+ - clean up ep93xx_mdio_{read,write} to conform to ep93xx manual
+ - convert ep93xx_eth driver to phylib framework
+ - set full duplex bit in configuration of MAC when FDX link detected
+ - convert to use print_mac()
+
+Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
+Cc: Lennert Buytenhek <buytenh@wantstofly.org>
+Cc: Andy Fleming <afleming@freescale.com>
+
+ drivers/net/arm/Kconfig      |    1 +
+ drivers/net/arm/ep93xx_eth.c |  354 +++++++++++++++++++++++++++++++++---------
+ 2 files changed, 282 insertions(+), 73 deletions(-)
+
+diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
+index f9cc2b6..5860175 100644
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -44,6 +44,7 @@ config EP93XX_ETH
+ 	tristate "EP93xx Ethernet support"
+ 	depends on ARM && ARCH_EP93XX
+ 	select MII
++	select PHYLIB
+ 	help
+ 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
+ 	  Say Y if you are building a kernel for EP93xx based devices.
+diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
+index 91a6590..6b9ac41 100644
+--- a/drivers/net/arm/ep93xx_eth.c
++++ b/drivers/net/arm/ep93xx_eth.c
+@@ -2,6 +2,7 @@
+  * EP93xx ethernet network device driver
+  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+  * Dedicated to Marija Kulikova.
++ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+@@ -14,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/netdevice.h>
+ #include <linux/mii.h>
++#include <linux/phy.h>
+ #include <linux/etherdevice.h>
+ #include <linux/ethtool.h>
+ #include <linux/init.h>
+@@ -37,6 +39,8 @@
+ #define  REG_RXCTL_DEFAULT	0x00073800
+ #define REG_TXCTL		0x0004
+ #define  REG_TXCTL_ENABLE	0x00000001
++#define REG_TESTCTL		0x0008
++#define  REG_TESTCTL_MFDX	0x00000040
+ #define REG_MIICMD		0x0010
+ #define  REG_MIICMD_READ	0x00008000
+ #define  REG_MIICMD_WRITE	0x00004000
+@@ -45,6 +49,9 @@
+ #define  REG_MIISTS_BUSY	0x00000001
+ #define REG_SELFCTL		0x0020
+ #define  REG_SELFCTL_RESET	0x00000001
++#define  REG_SELFCTL_MDCDIV_MSK 0x00007e00
++#define  REG_SELFCTL_MDCDIV_OFS 9
++#define  REG_SELFCTL_PSPRS	0x00000100
+ #define REG_INTEN		0x0024
+ #define  REG_INTEN_TX		0x00000008
+ #define  REG_INTEN_RX		0x00000007
+@@ -174,8 +181,14 @@ struct ep93xx_priv
+ 
+ 	struct net_device_stats	stats;
+ 
+-	struct mii_if_info	mii;
+ 	u8			mdc_divisor;
++	int			phy_supports_mfps:1;
++
++	struct mii_bus		mii_bus;
++	struct phy_device	*phy_dev;
++	int			speed;
++	int			duplex;
++	int			link;
+ };
+ 
+ #define rdb(ep, off)		__raw_readb((ep)->base_addr + (off))
+@@ -185,8 +198,6 @@ struct ep93xx_priv
+ #define wrw(ep, off, val)	__raw_writew((val), (ep)->base_addr + (off))
+ #define wrl(ep, off, val)	__raw_writel((val), (ep)->base_addr + (off))
+ 
+-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg);
+-
+ static struct net_device_stats *ep93xx_get_stats(struct net_device *dev)
+ {
+ 	struct ep93xx_priv *ep = netdev_priv(dev);
+@@ -542,12 +553,6 @@ static int ep93xx_start_hw(struct net_device *dev)
+ 		return 1;
+ 	}
+ 
+-	wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9));
+-
+-	/* Does the PHY support preamble suppress?  */
+-	if ((ep93xx_mdio_read(dev, ep->mii.phy_id, MII_BMSR) & 0x0040) != 0)
+-		wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9) | (1 << 8));
+-
+ 	/* Receive descriptor ring.  */
+ 	addr = ep->descs_dma_addr + offsetof(struct ep93xx_descs, rdesc);
+ 	wrl(ep, REG_RXDQBADD, addr);
+@@ -631,12 +636,11 @@ static int ep93xx_open(struct net_device *dev)
+ 		return -ENOMEM;
+ 
+ 	if (is_zero_ether_addr(dev->dev_addr)) {
++		DECLARE_MAC_BUF(mac_buf);
++
+ 		random_ether_addr(dev->dev_addr);
+-		printk(KERN_INFO "%s: generated random MAC address "
+-			"%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
+-			dev->dev_addr[0], dev->dev_addr[1],
+-			dev->dev_addr[2], dev->dev_addr[3],
+-			dev->dev_addr[4], dev->dev_addr[5]);
++		dev_info(&dev->dev, "generated random MAC address %s\n",
++			 print_mac(mac_buf, dev->dev_addr));
+ 	}
+ 
+ 	napi_enable(&ep->napi);
+@@ -664,6 +668,8 @@ static int ep93xx_open(struct net_device *dev)
+ 
+ 	wrl(ep, REG_GIINTMSK, REG_GIINTMSK_ENABLE);
+ 
++	phy_start(ep->phy_dev);
++
+ 	netif_start_queue(dev);
+ 
+ 	return 0;
+@@ -676,6 +682,9 @@ static int ep93xx_close(struct net_device *dev)
+ 	napi_disable(&ep->napi);
+ 	netif_stop_queue(dev);
+ 
++	if (ep->phy_dev)
++		phy_stop(ep->phy_dev);
++
+ 	wrl(ep, REG_GIINTMSK, 0);
+ 	free_irq(ep->irq, dev);
+ 	ep93xx_stop_hw(dev);
+@@ -687,53 +696,103 @@ static int ep93xx_close(struct net_device *dev)
+ static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+ {
+ 	struct ep93xx_priv *ep = netdev_priv(dev);
+-	struct mii_ioctl_data *data = if_mii(ifr);
+ 
+-	return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
++	return phy_mii_ioctl(ep->phy_dev, if_mii(ifr), cmd);
+ }
+ 
+-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
++/* common MII transactions should take < 100 iterations */
++#define EP93XX_PHY_TIMEOUT 2000
++
++static int ep93xx_mdio_wait(struct mii_bus *bus)
+ {
+-	struct ep93xx_priv *ep = netdev_priv(dev);
+-	int data;
+-	int i;
++	struct ep93xx_priv *ep = bus->priv;
++	unsigned int timeout = EP93XX_PHY_TIMEOUT;
+ 
+-	wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
++	while ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY)
++	      && timeout--)
++		cpu_relax();
+ 
+-	for (i = 0; i < 10; i++) {
+-		if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+-			break;
+-		msleep(1);
++	if (timeout <= 0) {
++		dev_err(bus->dev, "MII operation timed out\n");
++		return -ETIMEDOUT;
+ 	}
+ 
+-	if (i == 10) {
+-		printk(KERN_INFO DRV_MODULE_NAME ": mdio read timed out\n");
+-		data = 0xffff;
+-	} else {
+-		data = rdl(ep, REG_MIIDATA);
+-	}
++	return 0;
++}
++
++
++static int ep93xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
++{
++	struct ep93xx_priv *ep = bus->priv;
++	u32 selfctl;
++	u32 data;
++
++	if (ep93xx_mdio_wait(bus) < 0)
++		return -ETIMEDOUT;
++
++	selfctl = rdl(ep, REG_SELFCTL);
++
++	if (ep->phy_supports_mfps)
++	  wrl(ep, REG_SELFCTL, selfctl | REG_SELFCTL_PSPRS);
++	else
++	  wrl(ep, REG_SELFCTL, selfctl & ~REG_SELFCTL_PSPRS);
++
++	wrl(ep, REG_MIICMD, REG_MIICMD_READ | (mii_id << 5) | regnum);
++
++	if (ep93xx_mdio_wait(bus) < 0)
++		return -ETIMEDOUT;
++
++	data =  rdl(ep, REG_MIIDATA);
++
++	wrl(ep, REG_SELFCTL, selfctl);
+ 
+ 	return data;
+ }
+ 
+-static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
++static int ep93xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++			     u16 value)
+ {
+-	struct ep93xx_priv *ep = netdev_priv(dev);
+-	int i;
++	struct ep93xx_priv *ep = bus->priv;
++	u32 selfctl;
+ 
+-	wrl(ep, REG_MIIDATA, data);
+-	wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
++	if (ep93xx_mdio_wait(bus) < 0)
++		return -ETIMEDOUT;
+ 
+-	for (i = 0; i < 10; i++) {
+-		if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+-			break;
+-		msleep(1);
+-	}
++	selfctl = rdl(ep, REG_SELFCTL);
+ 
+-	if (i == 10)
+-		printk(KERN_INFO DRV_MODULE_NAME ": mdio write timed out\n");
++	if (ep->phy_supports_mfps)
++	  wrl(ep, REG_SELFCTL, selfctl | REG_SELFCTL_PSPRS);
++	else
++	  wrl(ep, REG_SELFCTL, selfctl & ~REG_SELFCTL_PSPRS);
++
++	wrl(ep, REG_MIIDATA, value);
++	wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (mii_id << 5) | regnum);
++
++	if (ep93xx_mdio_wait(bus) < 0)
++		return -ETIMEDOUT;
++
++	wrl(ep, REG_SELFCTL, selfctl);
++
++	return 0;
++}
++
++static int ep93xx_mdio_reset(struct mii_bus *bus)
++{
++	struct ep93xx_priv *ep = bus->priv;
++
++	u32 selfctl = rdl(ep, REG_SELFCTL);
++
++	selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
++
++	selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
++	selfctl |= REG_SELFCTL_PSPRS;
++
++	wrl(ep, REG_SELFCTL, selfctl);
++
++	return 0;
+ }
+ 
++
+ static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+ {
+ 	strcpy(info->driver, DRV_MODULE_NAME);
+@@ -743,33 +802,30 @@ static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *i
+ static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct ep93xx_priv *ep = netdev_priv(dev);
+-	return mii_ethtool_gset(&ep->mii, cmd);
++	struct phy_device *phydev = ep->phy_dev;
++
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_gset(phydev, cmd);
+ }
+ 
+ static int ep93xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct ep93xx_priv *ep = netdev_priv(dev);
+-	return mii_ethtool_sset(&ep->mii, cmd);
+-}
++	struct phy_device *phydev = ep->phy_dev;
+ 
+-static int ep93xx_nway_reset(struct net_device *dev)
+-{
+-	struct ep93xx_priv *ep = netdev_priv(dev);
+-	return mii_nway_restart(&ep->mii);
+-}
++	if (!phydev)
++		return -ENODEV;
+ 
+-static u32 ep93xx_get_link(struct net_device *dev)
+-{
+-	struct ep93xx_priv *ep = netdev_priv(dev);
+-	return mii_link_ok(&ep->mii);
++	return phy_ethtool_sset(phydev, cmd);
+ }
+ 
+ static struct ethtool_ops ep93xx_ethtool_ops = {
+ 	.get_drvinfo		= ep93xx_get_drvinfo,
+ 	.get_settings		= ep93xx_get_settings,
+ 	.set_settings		= ep93xx_set_settings,
+-	.nway_reset		= ep93xx_nway_reset,
+-	.get_link		= ep93xx_get_link,
++	.get_link		= ethtool_op_get_link,
+ };
+ 
+ struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
+@@ -824,15 +880,127 @@ static int ep93xx_eth_remove(struct platform_device *pdev)
+ 	return 0;
+ }
+ 
++static void ep93xx_adjust_link(struct net_device *dev)
++{
++	struct ep93xx_priv *ep = netdev_priv(dev);
++	struct phy_device *phydev = ep->phy_dev;
++
++	int status_change = 0;
++
++	if (phydev->link) {
++		if ((ep->speed != phydev->speed) ||
++		    (ep->duplex != phydev->duplex)) {
++			/* speed and/or duplex state changed */
++			u32 testctl = rdl(ep, REG_TESTCTL);
++
++			if (DUPLEX_FULL == phydev->duplex)
++				testctl |= REG_TESTCTL_MFDX;
++			else
++				testctl &= ~(REG_TESTCTL_MFDX);
++
++			wrl(ep, REG_TESTCTL, testctl);
++
++			ep->speed = phydev->speed;
++			ep->duplex = phydev->duplex;
++			status_change = 1;
++		}
++	}
++
++	/* test for online/offline link transition */
++	if (phydev->link != ep->link) {
++		if (phydev->link) /* link went online */
++			netif_schedule(dev);
++		else { /* link went offline */
++			ep->speed = 0;
++			ep->duplex = -1;
++		}
++		ep->link = phydev->link;
++
++		status_change = 1;
++	}
++
++	if (status_change)
++		phy_print_status(phydev);
++}
++
++static int ep93xx_mii_probe(struct net_device *dev, int phy_addr)
++{
++	struct ep93xx_priv *ep = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	int val;
++
++	if (phy_addr >= 0 && phy_addr < PHY_MAX_ADDR)
++		phydev = ep->mii_bus.phy_map[phy_addr];
++
++	if (!phydev) {
++		dev_info(&dev->dev,
++			 "PHY not found at specified address,"
++			 " trying autodetection\n");
++
++		/* find the first phy */
++		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++			if (ep->mii_bus.phy_map[phy_addr]) {
++				phydev = ep->mii_bus.phy_map[phy_addr];
++				break;
++			}
++		}
++	}
++
++	if (!phydev) {
++		dev_err(&dev->dev, "no PHY found\n");
++		return -ENODEV;
++	}
++
++	phydev = phy_connect(dev, phydev->dev.bus_id,
++			     ep93xx_adjust_link, 0, PHY_INTERFACE_MODE_MII);
++
++	if (IS_ERR(phydev)) {
++		dev_err(&dev->dev, "Could not attach to PHY\n");
++		return PTR_ERR(phydev);
++	}
++
++	ep->phy_supports_mfps = 0;
++
++	val = phy_read(phydev, MII_BMSR);
++	if (val < 0) {
++		dev_err(&phydev->dev, "failed to read MII register\n");
++		return val;
++	}
++
++	if (val & 0x0040) {
++		dev_info(&phydev->dev,
++			 "PHY supports MII frame preamble suppression\n");
++		ep->phy_supports_mfps = 1;
++	}
++
++	phydev->supported &= PHY_BASIC_FEATURES;
++
++	phydev->advertising = phydev->supported;
++
++	ep->link = 0;
++	ep->speed = 0;
++	ep->duplex = -1;
++	ep->phy_dev = phydev;
++
++	dev_info(&dev->dev, "attached PHY driver [%s] "
++		 "(mii_bus:phy_addr=%s, irq=%d)\n",
++		 phydev->drv->name, phydev->dev.bus_id, phydev->irq);
++
++	return 0;
++}
++
++
+ static int ep93xx_eth_probe(struct platform_device *pdev)
+ {
+ 	struct ep93xx_eth_data *data;
+ 	struct net_device *dev;
+ 	struct ep93xx_priv *ep;
+-	int err;
++	DECLARE_MAC_BUF(mac_buf);
++	int err, i;
+ 
+ 	if (pdev == NULL)
+ 		return -ENODEV;
++
+ 	data = pdev->dev.platform_data;
+ 
+ 	dev = ep93xx_dev_alloc(data);
+@@ -852,7 +1020,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
+ 	if (ep->res == NULL) {
+ 		dev_err(&pdev->dev, "Could not reserve memory region\n");
+ 		err = -ENOMEM;
+-		goto err_out;
++		goto err_out_request_mem_region;
+ 	}
+ 
+ 	ep->base_addr = ioremap(pdev->resource[0].start,
+@@ -860,34 +1028,74 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
+ 	if (ep->base_addr == NULL) {
+ 		dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
+ 		err = -EIO;
+-		goto err_out;
++		goto err_out_ioremap;
+ 	}
+ 	ep->irq = pdev->resource[1].start;
+ 
+-	ep->mii.phy_id = data->phy_id;
+-	ep->mii.phy_id_mask = 0x1f;
+-	ep->mii.reg_num_mask = 0x1f;
+-	ep->mii.dev = dev;
+-	ep->mii.mdio_read = ep93xx_mdio_read;
+-	ep->mii.mdio_write = ep93xx_mdio_write;
++	/* mdio/mii bus */
++	ep->mii_bus.name = "ep93xx_mii_bus";
++	ep->mii_bus.id = 0;
++
++	ep->mii_bus.read = ep93xx_mdio_read;
++	ep->mii_bus.write = ep93xx_mdio_write;
++	ep->mii_bus.reset = ep93xx_mdio_reset;
++
++	ep->mii_bus.phy_mask = 0;
++
++	ep->mii_bus.priv = ep;
++	ep->mii_bus.dev = &dev->dev;
++
++	ep->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
++	if (NULL == ep->mii_bus.irq) {
++		dev_err(&pdev->dev, "Could not allocate memory\n");
++		err = -ENOMEM;
++		goto err_out_mii_bus_irq_kmalloc;
++	}
++
++	for (i = 0; i < PHY_MAX_ADDR; i++)
++		ep->mii_bus.irq[i] = PHY_POLL;
++
+ 	ep->mdc_divisor = 40;	/* Max HCLK 100 MHz, min MDIO clk 2.5 MHz.  */
++	ep->phy_supports_mfps = 0; /* probe without preamble suppression */
+ 
+ 	err = register_netdev(dev);
+ 	if (err) {
+ 		dev_err(&pdev->dev, "Failed to register netdev\n");
+-		goto err_out;
++		goto err_out_register_netdev;
+ 	}
+ 
+-	printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, "
+-			 "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
+-			ep->irq, data->dev_addr[0], data->dev_addr[1],
+-			data->dev_addr[2], data->dev_addr[3],
+-			data->dev_addr[4], data->dev_addr[5]);
++	err = mdiobus_register(&ep->mii_bus);
++	if (err) {
++		dev_err(&dev->dev, "Could not register MII bus\n");
++		goto err_out_mdiobus_register;
++	}
++
++	err = ep93xx_mii_probe(dev, data->phy_id);
++	if (err) {
++		dev_err(&dev->dev, "failed to probe MII bus\n");
++		goto err_out_mii_probe;
++	}
++
++	dev_info(&dev->dev, "ep93xx on-chip ethernet, IRQ %d, %s\n",
++		 ep->irq, print_mac(mac_buf, dev->dev_addr));
+ 
+ 	return 0;
+ 
++err_out_mii_probe:
++	mdiobus_unregister(&ep->mii_bus);
++err_out_mdiobus_register:
++	unregister_netdev(dev);
++err_out_register_netdev:
++	kfree(ep->mii_bus.irq);
++err_out_mii_bus_irq_kmalloc:
++	iounmap(ep->base_addr);
++err_out_ioremap:
++	release_resource(ep->res);
++	kfree(ep->res);
++err_out_request_mem_region:
++	free_netdev(dev);
+ err_out:
+-	ep93xx_eth_remove(pdev);
++
+ 	return err;
+ }
+ 
diff --git a/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch
index 0883322c28..17ee397f45 100644
--- a/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch
+++ b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch
@@ -217,3 +217,222 @@ index bb9a7aa..4d7dad1 100644
  /* Used for packet mode */
  #define TIOCPKT_DATA		 0
  #define TIOCPKT_FLUSHREAD	 1
+RS485 auto mode support ported from 2.4 (diff against 2.6.19-rc6-git10)
+
+Signed-off-by: Petr Stetiar <ynezz@true.cz>
+
+diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
+index 4213fab..5b3c5ff 100644
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
+@@ -50,6 +50,7 @@
+ #include <linux/amba/serial.h>
+ 
+ #include <asm/io.h>
++#include <asm/hardware.h>
+ 
+ #define UART_NR		8
+ 
+@@ -65,6 +66,11 @@
+ #define UART_DUMMY_RSR_RX	256
+ #define UART_PORT_SIZE		64
+ 
++#ifdef CONFIG_MACH_TS72XX
++static void __iomem *ts_rs485_data9_register;
++static void __iomem *ts_rs485_control_register;
++#endif
++
+ /*
+  * We wrap our port structure around the generic uart_port.
+  */
+@@ -487,6 +493,107 @@ static int pl010_verify_port(struct uart
+ 	return ret;
+ }
+ 
++#ifdef CONFIG_MACH_TS72XX
++static int ts72xx_rs485_init(void)
++{
++	ts_rs485_data9_register = ioremap(TS72XX_RS485_DATA9_PHYS_BASE, 4096);
++	if (ts_rs485_data9_register == NULL) {
++		return -1;
++	}
++
++	ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096);
++	if (ts_rs485_control_register == NULL) {
++		iounmap(ts_rs485_data9_register);
++		return -1;
++	}
++
++	return 0;
++}
++
++static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg)
++{
++	int baud, cflag, mode;
++	int datalength;
++
++	mode = (int)*arg;
++	if (!is_rs485_installed()) {
++		printk("amba-pl010.c: this board does not support RS485 auto mode\n");
++		return -EINVAL;
++	}
++
++	if (port->line != 1) {
++		printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n");
++		return -EINVAL;
++	}
++
++	datalength = 8;
++	cflag = port->info->tty->termios->c_cflag ;
++	if (cflag & PARENB)
++		datalength++;
++
++	if (cflag & CSTOPB)
++		datalength++;
++
++	baud = tty_get_baud_rate(port->info->tty);
++
++	switch (cmd) {
++		case TIOC_SBCC485:
++			if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) {
++				printk("amba-pl010.c: unsetting auto RS485 mode\n");
++				__raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register);
++				__raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register);
++			}
++			break;
++		case TIOC_SBCS485:
++			if (mode & TS72XX_RS485_AUTO485FD) {
++				printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n");
++				__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register);
++				if (datalength > 8)
++					__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
++			} else if (mode & TS72XX_RS485_AUTO485HD) {
++				printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n");
++				switch (baud) {
++					case 9600:
++						__raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register);
++						break;
++					case 19200:
++						__raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register);
++						break;
++					case 57600:
++						__raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register);
++						break;
++					case 115200:
++						__raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register);
++						break;
++					default:
++					printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud);
++					return -1;
++				}
++				if (datalength > 8)
++					__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
++			}
++			break;
++	}
++
++	return 0;
++}
++#endif
++
++int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
++{
++#ifdef CONFIG_MACH_TS72XX
++	switch (cmd) {
++		case TIOC_SBCC485:
++		case TIOC_SBCS485:
++			return ts72xx_auto485(port, cmd, (unsigned long *)arg);
++			break;
++		default:
++			return -ENOIOCTLCMD;
++	}
++#endif
++	return -ENOIOCTLCMD;
++}
++
+ static struct uart_ops amba_pl010_pops = {
+ 	.tx_empty	= pl010_tx_empty,
+ 	.set_mctrl	= pl010_set_mctrl,
+@@ -504,6 +611,7 @@ static struct uart_ops amba_pl010_pops =
+ 	.request_port	= pl010_request_port,
+ 	.config_port	= pl010_config_port,
+ 	.verify_port	= pl010_verify_port,
++	.ioctl		= pl010_ioctl,
+ };
+ 
+ static struct uart_amba_port *amba_ports[UART_NR];
+@@ -746,6 +854,15 @@ static int __init pl010_init(void)
+ 	ret = uart_register_driver(&amba_reg);
+ 	if (ret == 0) {
+ 		ret = amba_driver_register(&pl010_driver);
++#ifdef CONFIG_MACH_TS72XX
++		if (!ret && is_rs485_installed()) {
++			ret = ts72xx_rs485_init();
++			if (ret)
++				printk("amba-pl010.c: ts72xx_rs485_init() failed\n");
++			else
++				printk("amba-pl010.c: auto RS485 mode initialized\n");
++		}
++#endif
+ 		if (ret)
+ 			uart_unregister_driver(&amba_reg);
+ 	}
+@@ -756,6 +873,10 @@ static void __exit pl010_exit(void)
+ {
+ 	amba_driver_unregister(&pl010_driver);
+ 	uart_unregister_driver(&amba_reg);
++#ifdef CONFIG_MACH_TS72XX
++	iounmap(ts_rs485_data9_register);
++	iounmap(ts_rs485_control_register);
++#endif
+ }
+ 
+ module_init(pl010_init);
+diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
+index a94f63f..4c9396b 100644
+--- a/include/asm-arm/arch-ep93xx/ts72xx.h
++++ b/include/asm-arm/arch-ep93xx/ts72xx.h
+@@ -68,6 +68,16 @@
+ #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
+ #define TS72XX_RTC_DATA_SIZE		0x00001000
+ 
++#define TS72XX_RS485_CONTROL_PHYS_BASE	0x22C00000
++#define TS72XX_RS485_DATA9_PHYS_BASE	0x23000000
++#define TS72XX_RS485_AUTO485FD		1
++#define TS72XX_RS485_AUTO485HD		2
++#define TS72XX_RS485_MODE_RS232	0x00
++#define TS72XX_RS485_MODE_FD		0x01
++#define TS72XX_RS485_MODE_9600_HD	0x04
++#define TS72XX_RS485_MODE_19200_HD	0x05
++#define TS72XX_RS485_MODE_57600_HD	0x06
++#define TS72XX_RS485_MODE_115200_HD	0x07
+ 
+ #ifndef __ASSEMBLY__
+ #include <asm/io.h>
+@@ -87,6 +100,12 @@ static inline int board_is_ts7260(void)
+ 	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+ }
+ 
++static inline int is_rs485_installed(void)
++{
++	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
++					TS72XX_OPTIONS_COM2_RS485);
++}
++
+ static inline int is_max197_installed(void)
+ {
+ 	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h
+index bb9a7aa..4d7dad1 100644
+--- a/include/asm-arm/ioctls.h
++++ b/include/asm-arm/ioctls.h
+@@ -66,6 +66,9 @@
+ #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+ #define FIOQSIZE	0x545E
+ 
++#define TIOC_SBCC485	0x545F /* TS72xx RTS/485 mode clear */
++#define TIOC_SBCS485	0x5460 /* TS72xx RTS/485 mode set */
++
+ /* Used for packet mode */
+ #define TIOCPKT_DATA		 0
+ #define TIOCPKT_FLUSHREAD	 1
diff --git a/packages/linux/linux_2.6.24.bb b/packages/linux/linux_2.6.24.bb
index 13f767c56b..3a51a594f4 100644
--- a/packages/linux/linux_2.6.24.bb
+++ b/packages/linux/linux_2.6.24.bb
@@ -73,6 +73,7 @@ SRC_URI_append_ts72xx = "\
 	file://ep93xx-serial-clocks.diff;patch=1 \
 	file://ep93xx-timer-accuracy.diff;patch=1 \
 	file://ep93xx-maverick-uniqid.patch;patch=1 \
+	file://ep93xx-eth-phylib-framework.patch;patch=1 \
 	file://ts72xx-nfbit-fix.patch;patch=1 \
 	file://ts72xx-machine-id-fix.patch;patch=1 \
 	file://ts72xx-watchdog.patch;patch=1 \