diff options
| author | Koen Kooi <koen@openembedded.org> | 2007-09-10 03:35:48 +0000 |
|---|---|---|
| committer | Koen Kooi <koen@openembedded.org> | 2007-09-10 03:35:48 +0000 |
| commit | 4dab2a3bd62003416bbc7557d42dd40d0fb81cfe (patch) | |
| tree | 7ad4efd42e590f9c29c746e93f1a8beb954034f3 /packages/linux | |
| parent | 92f78925abb02d4ba25c95a83c49172006c9cc5d (diff) | |
linux-ezx: update to svn r2050
Diffstat (limited to 'packages/linux')
32 files changed, 1796 insertions, 1626 deletions
diff --git a/packages/linux/linux-ezx-2.6.21/a1200/defconfig b/packages/linux/linux-ezx-2.6.21/a1200/defconfig index 5a089bc1bb..ea7475ced2 100755 --- a/packages/linux/linux-ezx-2.6.21/a1200/defconfig +++ b/packages/linux/linux-ezx-2.6.21/a1200/defconfig @@ -152,6 +152,7 @@ CONFIG_PXA_EZX_A1200=y # CONFIG_PXA_EZX_E6 is not set CONFIG_EZX_BP=y CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y CONFIG_EZX_EMU=y CONFIG_EZX_EMU_USB=y # CONFIG_EZX_EMU_UART is not set diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-eoc.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-eoc.patch new file mode 100644 index 0000000000..577aa66303 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-eoc.patch @@ -0,0 +1,82 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 22:15:52.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-09 13:29:56.000000000 -0300 +@@ -25,6 +25,7 @@ + #include <asm/arch/mmc.h> + + #include "generic.h" ++#include "ezx-eoc.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); +@@ -227,11 +228,69 @@ + .resource = pcap_ts_resources, + }; + ++ ++/* EOC */ ++static const unsigned int tab_init_eoc_reg[][2] = ++{ ++ {POWER_IC_REG_EOC_INT_MASK, 0x00000FEF}, ++ {POWER_IC_REG_EOC_POWER_CONTROL_0, 0x00000C00}, ++ {POWER_IC_REG_EOC_POWER_CONTROL_1, 0x0000000C}, ++ {POWER_IC_REG_EOC_CONN_CONTROL, 0x00021044}, ++}; ++ ++static void dump_eoc_registers(void) ++{ ++ int i, val = 0; ++ ++ printk("========DUMP EOC=========\n"); ++ for (i = 0; i < POWER_IC_REG_EOC_NUM; i++) { ++ eoc_reg_read(i, &val); ++ printk("eoc_registers[%d] = 0x%08X\n", i, val); ++ } ++ printk("========END DUMP=========\n"); ++} ++ ++/* ++ * FIXME: The same about the PCAP driver applies here. ++ * This is the initial state only. ++ * Which bits does the change to USB/UART/AUDIO mode? ++ * I think that this is causing the crash on pxa27x-udc ++ * you are setting the 'port connected' bit, and thats why ++ * you are getting interrupts early. ++ * --WM ++ */ ++ ++static int __init a1200_eoc_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < sizeof(tab_init_eoc_reg)/sizeof(unsigned int)/2; i++) ++ { ++ eoc_reg_write(tab_init_eoc_reg[i][0], tab_init_eoc_reg[i][1]); ++ } ++ dump_eoc_registers(); ++ return 0; ++} ++ ++static struct ezx_eoc_platform_data a1200_eoc_platform_data = { ++ .init = a1200_eoc_init, ++}; ++ ++struct platform_device a1200_eoc_device = { ++ .name = "ezx-eoc", ++ .id = -1, ++ .dev = { ++ .platform_data = &a1200_eoc_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a1200_pcap_device, + &pcap_ts_device, ++ &a1200_eoc_device, + }; + ++ + static void __init a1200_init(void) + { + set_pxa_fb_info(&a1200_fb_info); diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch index 0bd7581965..042254b115 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:48:05.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:53:19.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:51:55.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:54:52.000000000 -0300 @@ -13,6 +13,8 @@ #include <linux/init.h> #include <linux/platform_device.h> @@ -114,7 +114,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c static struct pxafb_mode_info mode_a1200 = { .pixclock = 192308, .xres = 240, -@@ -88,6 +180,7 @@ +@@ -118,6 +210,7 @@ static void __init a1200_init(void) { set_pxa_fb_info(&a1200_fb_info); diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch index 9bc17555cd..8aa1e46d73 100644 --- a/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:44:12.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:45:56.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:32:32.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:51:55.000000000 -0300 @@ -19,6 +19,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxafb.h> @@ -10,13 +10,43 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c #include "generic.h" -@@ -48,7 +49,40 @@ +@@ -48,7 +49,70 @@ .pxafb_lcd_power = &ezx_lcd_power, }; +/* PCAP */ +static int __init a1200_pcap_init(void) +{ ++ /* ++ * FIXME: this is the PCAP INITIAL STATE. ++ * most of these writes should NOT be done here ++ * * voltage regulators, voltage enablers should be set by the ++ * driver which uses the connected hardware. Otherwise you ++ * drain power unnecessarily. ++ * * interrupt related registers should be set by the irq functions ++ * only. I think that the INT_SEL register selects on which irq ++ * pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but ++ * only if it actually makes any difference. ++ * * Only power state automatic changes should be done here. ++ * (*LOWPWR, *STBY, LOWPWR*) ++ * * I removed some writes which i consider extremelly wrong. And ++ * which i think will not break anything (they were overwritten ++ * later anyway). ++ * ++ * --WM ++ */ ++ ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */ ++ ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */ ++ ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */ ++ ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c); ++ ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */ ++ + return 0; +} + diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch index bcac76d16c..a8c8f2ee29 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch @@ -1,16 +1,16 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:54:35.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-06-28 22:55:00.000000000 -0300 -@@ -173,8 +173,33 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:54:52.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:55:10.000000000 -0300 +@@ -203,8 +203,33 @@ }, }; +/* PCAP_TS */ +struct resource pcap_ts_resources[] = { + [0] = { -+ .start = EZX_IRQ_ADCDONE2, -+ .end = EZX_IRQ_ADCDONE2, ++ .start = EZX_IRQ_ADCDONE, ++ .end = EZX_IRQ_ADCDONE, + .flags = IORESOURCE_IRQ, + }, + [1] = { diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch index 1477ce48ea..f6121c6e7f 100644 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:46:15.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:52:09.000000000 -0300 -@@ -219,8 +219,33 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:02:13.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:03:16.000000000 -0300 +@@ -211,8 +211,33 @@ }, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch index 4c61a35ec2..88f15041db 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:58:07.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 20:02:00.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:58:17.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:59:03.000000000 -0300 @@ -17,6 +17,7 @@ #include <linux/mmc/host.h> #include <linux/irq.h> @@ -10,7 +10,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #include <asm/mach-types.h> #include <asm/mach/arch.h> -@@ -319,10 +320,33 @@ +@@ -311,10 +312,33 @@ .resource = pcap_ts_resources, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch index 9f26b3dd94..d7d114cfed 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:52:09.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:56:13.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:03:16.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:05:18.000000000 -0300 @@ -16,6 +16,7 @@ #include <linux/fb.h> #include <linux/mmc/host.h> @@ -24,7 +24,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #ifdef CONFIG_EZX_PCAP extern int ezx_pcap_mmcsd_power(int); -@@ -243,6 +246,55 @@ +@@ -235,6 +238,55 @@ .resource = a780_emu_resources, }; @@ -80,7 +80,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c static struct platform_device *devices[] __initdata = { &a780_pcap_device, &a780_emu_device, -@@ -263,6 +315,7 @@ +@@ -255,6 +307,7 @@ set_pxa_fb_info(&a780_fb_info); pxa_set_mci_info(&a780_mci_platform_data); diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch index ff7a0b3dab..e8336d8855 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch @@ -5,8 +5,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/leds/Kconfig 2007-08-01 19:38:44.000000000 -0300 -+++ linux-2.6.21/drivers/leds/Kconfig 2007-08-01 20:03:29.000000000 -0300 +--- linux-2.6.21.orig/drivers/leds/Kconfig 2007-08-31 22:27:41.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Kconfig 2007-08-31 23:59:27.000000000 -0300 @@ -104,6 +104,13 @@ These triggers allow kernel events to drive the LEDs and can be configured via sysfs. If unsure, say Y. @@ -23,8 +23,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig depends on LEDS_TRIGGERS Index: linux-2.6.21/drivers/leds/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/leds/Makefile 2007-08-01 19:38:44.000000000 -0300 -+++ linux-2.6.21/drivers/leds/Makefile 2007-08-01 20:03:29.000000000 -0300 +--- linux-2.6.21.orig/drivers/leds/Makefile 2007-08-31 22:27:41.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Makefile 2007-08-31 23:59:27.000000000 -0300 @@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_H1940) += leds-h1940.o @@ -36,7 +36,7 @@ Index: linux-2.6.21/drivers/leds/Makefile Index: linux-2.6.21/drivers/leds/leds-a780.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/leds/leds-a780.c 2007-08-01 20:03:29.000000000 -0300 ++++ linux-2.6.21/drivers/leds/leds-a780.c 2007-08-31 23:59:27.000000000 -0300 @@ -0,0 +1,122 @@ +/* + * EZX Platform LED Driver for the Motorola A780 GSM Phone @@ -62,22 +62,22 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c +{ + if ( value > 31 ) value = 31; + printk( KERN_DEBUG "a780led_main_set: %d\n", value ); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL0, value & 0x01); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL1, value & 0x02); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL2, value & 0x04); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL3, value & 0x08); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL4, value & 0x10); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL0, value & 0x01); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL1, value & 0x02); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL2, value & 0x04); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL3, value & 0x08); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL4, value & 0x10); +} + +static void a780led_aux_set(struct led_classdev *led_cdev, enum led_brightness value) +{ + if ( value > 31 ) value = 31; + printk( KERN_DEBUG "a780led_aux_set: %d\n", value ); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL0, value & 0x01); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL1, value & 0x02); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL2, value & 0x04); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL3, value & 0x08); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL4, value & 0x10); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL0, value & 0x01); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL1, value & 0x02); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL2, value & 0x04); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL3, value & 0x08); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10); +} + +static struct led_classdev a780_main_led = { @@ -162,9 +162,9 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 20:02:00.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 20:03:29.000000000 -0300 -@@ -341,12 +341,20 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:59:03.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:59:27.000000000 -0300 +@@ -333,12 +333,20 @@ }, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch index 3cf1848502..1238c1cf71 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:45:00.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:53:03.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:01:54.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:02:13.000000000 -0300 @@ -14,6 +14,8 @@ #include <linux/init.h> #include <linux/platform_device.h> @@ -114,7 +114,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c static struct pxafb_mode_info mode_a780 = { .pixclock = 150000, .xres = 240, -@@ -145,6 +237,7 @@ +@@ -137,6 +229,7 @@ PSLR = 0x05800f00; set_pxa_fb_info(&a780_fb_info); diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch index 35417344e0..afb5d9c005 100644 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:44:12.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-06-28 22:45:00.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 22:33:03.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:01:17.000000000 -0300 @@ -20,6 +20,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxafb.h> @@ -10,7 +10,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c #include "generic.h" -@@ -49,7 +50,85 @@ +@@ -49,7 +50,77 @@ .pxafb_lcd_power = &ezx_lcd_power, }; @@ -18,49 +18,41 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +static int __init a780_pcap_init(void) +{ + /* initialize PCAP registers */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); -+// ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL3); -+ + /* set SW1 sleep to keep SW1 1.3v in sync mode */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE10, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE11, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0); + + /* SW1 active in sync mode */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE00, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE01, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0); + + /* at SW1 -core voltage to 1.30V */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW10_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW11_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW12_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW13_DVS, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0); + + /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_LOWPWR, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0); + + /* + * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- + * camera for e680 + */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_LOWPWR, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0); + + /* set Vc to low power mode when AP sleep */ -+// SSP_PCAP_bit_set( SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VC_STBY); -+ -+ /* set VAUX2 to voltage 2.775V and low power mode when AP sleep */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_1, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_0, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_LOWPWR, 1); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, 1); ++// SSP_PCAP_bit_set(PCAP_BIT_LOWPWR_CTRL_VC_STBY); + -+// PGSR(GPIO34_TXENB) |= GPIO_bit(GPIO34_TXENB); ++ /* set VAUX2 to low power mode when AP sleep */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1); + + return 0; +} diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch index 7c455cfb3a..e7ca3c106a 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:56:13.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-01 19:58:07.000000000 -0300 -@@ -295,9 +295,34 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:05:18.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:06:53.000000000 -0300 +@@ -287,9 +287,34 @@ }, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch index 7436c40f5f..aa903feea7 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch @@ -1,74 +1,26 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c =================================================================== ---- linux-2.6.21.orig/drivers/leds/leds-a780.c 2007-05-08 15:09:26.000000000 -0300 -+++ linux-2.6.21/drivers/leds/leds-a780.c 2007-05-08 15:19:26.000000000 -0300 -@@ -18,10 +18,13 @@ - #include <linux/leds.h> - #include <asm/arch/ezx-pcap.h> - -+extern void ezx_pcap_vibrator_level(u_int32_t); -+ - static void a780led_main_set(struct led_classdev *led_cdev, enum led_brightness value) - { - if ( value > 31 ) value = 31; - printk( KERN_DEBUG "a780led_main_set: %d\n", value ); -+#warning FIXME: use read/write operations - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL0, value & 0x01); - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL1, value & 0x02); - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL2, value & 0x04); -@@ -33,6 +36,7 @@ - { - if ( value > 31 ) value = 31; - printk( KERN_DEBUG "a780led_aux_set: %d\n", value ); -+#warning FIXME: use read/write operations - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL0, value & 0x01); - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL1, value & 0x02); - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL2, value & 0x04); -@@ -40,6 +44,43 @@ - ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL4, value & 0x10); +--- linux-2.6.21.orig/drivers/leds/leds-a780.c 2007-09-01 00:15:03.000000000 -0300 ++++ linux-2.6.21/drivers/leds/leds-a780.c 2007-09-01 00:23:39.000000000 -0300 +@@ -40,6 +40,17 @@ + ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10); } +static void a780vibrator_set(struct led_classdev *led_cdev, enum led_brightness value) +{ -+ if ( value > 4 ) value = 4; ++ if (value > 4) value = 4; + printk( KERN_DEBUG "a780vibrator_set: %d\n", value ); -+ -+ switch(value) -+ { -+ case 0: -+ /* turn off vibrator */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN, 0); -+ break; -+ -+ case 1: -+ ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN, 1); -+ break; -+ -+ case 2: -+ ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN, 1); -+ break; -+ -+ case 3: -+ ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL2); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN, 1); -+ break; -+ -+ case 4: -+ ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL3); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN, 1); -+ break; -+ -+ default: -+ break; -+ } ++ ezx_pcap_vibrator_level(value-1); ++ if (value == 0) ++ ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 0); ++ else ++ ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 1); +} + static struct led_classdev a780_main_led = { .name = "a780:main", .default_trigger = "none", -@@ -52,11 +93,18 @@ +@@ -52,11 +63,18 @@ .brightness_set = a780led_aux_set, }; @@ -87,7 +39,7 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c return 0; } -@@ -64,6 +112,7 @@ +@@ -64,6 +82,7 @@ { led_classdev_resume(&a780_main_led); led_classdev_resume(&a780_aux_led); @@ -95,7 +47,7 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c return 0; } #endif -@@ -77,8 +126,16 @@ +@@ -77,8 +96,16 @@ return ret; ret = led_classdev_register(&pdev->dev, &a780_aux_led); @@ -113,7 +65,7 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c return ret; } -@@ -87,6 +144,7 @@ +@@ -87,6 +114,7 @@ { led_classdev_unregister(&a780_main_led); led_classdev_unregister(&a780_aux_led); @@ -121,19 +73,18 @@ Index: linux-2.6.21/drivers/leds/leds-a780.c return 0; } -@@ -111,6 +169,8 @@ +@@ -111,6 +139,7 @@ { a780led_main_set( &a780_main_led, 0 ); a780led_aux_set( &a780_aux_led, 0 ); + a780vibrator_set( &a780_vibrator, 0 ); -+ platform_driver_unregister(&a780led_driver); } Index: linux-2.6.21/drivers/leds/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/leds/Kconfig 2007-05-08 15:09:26.000000000 -0300 -+++ linux-2.6.21/drivers/leds/Kconfig 2007-05-08 15:09:26.000000000 -0300 +--- linux-2.6.21.orig/drivers/leds/Kconfig 2007-09-01 00:15:03.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Kconfig 2007-09-01 00:15:08.000000000 -0300 @@ -105,11 +105,11 @@ be configured via sysfs. If unsure, say Y. diff --git a/packages/linux/linux-ezx-2.6.21/patches/asoc-fix-loopback.patch b/packages/linux/linux-ezx-2.6.21/patches/asoc-fix-loopback.patch new file mode 100644 index 0000000000..feea138984 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/asoc-fix-loopback.patch @@ -0,0 +1,14 @@ +Index: linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c +=================================================================== +--- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-pcm.c 2007-09-02 22:30:56.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c 2007-09-02 22:36:26.000000000 -0300 +@@ -153,7 +153,8 @@ + static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) + { + struct pxa2xx_runtime_data *prtd = substream->runtime->private_data; +- ++ /* no dma if on loopback */ ++ if (!prtd->params) return 0; + DCSR(prtd->dma_ch) &= ~DCSR_RUN; + DCSR(prtd->dma_ch) = 0; + DCMD(prtd->dma_ch) = 0; diff --git a/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch b/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch index 1fc8283ca2..dd5b71a512 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c 2007-05-14 21:14:38.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c 2007-09-02 22:50:31.000000000 -0300 @@ -0,0 +1,671 @@ +/* + * pxa2xx-ssp.c -- ALSA Soc Audio Layer @@ -43,7 +43,7 @@ Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c +#include "pxa2xx-pcm.h" +#include "pxa2xx-ssp.h" + -+#define PXA_SSP_DEBUG 1 ++#define PXA_SSP_DEBUG 0 + +/* + * The following should be defined in pxa-regs.h @@ -677,7 +677,7 @@ Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.h 2007-05-14 21:14:38.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.h 2007-09-02 22:48:59.000000000 -0300 @@ -0,0 +1,42 @@ +/* + * linux/sound/arm/pxa2xx-ssp.h @@ -723,8 +723,8 @@ Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.h +#endif Index: linux-2.6.21/sound/soc/pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/sound/soc/pxa/Kconfig 2007-05-14 21:16:22.000000000 -0300 -+++ linux-2.6.21/sound/soc/pxa/Kconfig 2007-05-14 21:17:01.000000000 -0300 +--- linux-2.6.21.orig/sound/soc/pxa/Kconfig 2007-09-02 22:48:51.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/Kconfig 2007-09-02 22:50:18.000000000 -0300 @@ -20,6 +20,10 @@ config SND_PXA2XX_SOC_I2S tristate @@ -738,8 +738,8 @@ Index: linux-2.6.21/sound/soc/pxa/Kconfig depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx Index: linux-2.6.21/sound/soc/pxa/Makefile =================================================================== ---- linux-2.6.21.orig/sound/soc/pxa/Makefile 2007-05-14 21:14:52.000000000 -0300 -+++ linux-2.6.21/sound/soc/pxa/Makefile 2007-05-14 21:16:10.000000000 -0300 +--- linux-2.6.21.orig/sound/soc/pxa/Makefile 2007-09-02 22:48:51.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/Makefile 2007-09-02 22:50:18.000000000 -0300 @@ -2,10 +2,12 @@ snd-soc-pxa2xx-objs := pxa2xx-pcm.o snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch index 572485dde6..3645aef040 100644 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:53:13.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:55:54.000000000 -0300 -@@ -222,8 +222,33 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:47:32.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:48:06.000000000 -0300 +@@ -214,8 +214,33 @@ }, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch index 0d2047c2c1..ffd8bbb754 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:55:54.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:56:21.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-07 11:07:33.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-07 11:10:47.000000000 -0300 @@ -15,6 +15,7 @@ #include <linux/fb.h> #include <linux/mmc/host.h> @@ -24,7 +24,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #ifdef CONFIG_EZX_PCAP extern int ezx_pcap_mmcsd_power(int); -@@ -246,6 +249,58 @@ +@@ -238,6 +241,58 @@ .resource = e680_emu_resources, }; @@ -83,7 +83,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c static struct platform_device *devices[] __initdata = { &e680_pcap_device, &e680_emu_device, -@@ -266,6 +321,7 @@ +@@ -258,6 +313,7 @@ set_pxa_fb_info(&e680_fb_info); pxa_set_mci_info(&e680_mci_platform_data); diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch index beffb28a04..72ba219a44 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch @@ -5,8 +5,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/leds/Kconfig 2007-08-01 20:03:29.000000000 -0300 -+++ linux-2.6.21/drivers/leds/Kconfig 2007-08-01 20:04:02.000000000 -0300 +--- linux-2.6.21.orig/drivers/leds/Kconfig 2007-09-06 00:49:29.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Kconfig 2007-09-06 00:51:36.000000000 -0300 @@ -111,6 +111,13 @@ This option enables support for the LEDs on the Motorola A780 GSM Phone. @@ -23,8 +23,8 @@ Index: linux-2.6.21/drivers/leds/Kconfig depends on LEDS_TRIGGERS Index: linux-2.6.21/drivers/leds/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/leds/Makefile 2007-08-01 20:03:29.000000000 -0300 -+++ linux-2.6.21/drivers/leds/Makefile 2007-08-01 20:04:02.000000000 -0300 +--- linux-2.6.21.orig/drivers/leds/Makefile 2007-09-06 00:49:29.000000000 -0300 ++++ linux-2.6.21/drivers/leds/Makefile 2007-09-06 00:49:30.000000000 -0300 @@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o @@ -36,7 +36,7 @@ Index: linux-2.6.21/drivers/leds/Makefile Index: linux-2.6.21/drivers/leds/leds-e680.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/leds/leds-e680.c 2007-08-01 20:04:02.000000000 -0300 ++++ linux-2.6.21/drivers/leds/leds-e680.c 2007-09-06 00:51:22.000000000 -0300 @@ -0,0 +1,235 @@ +/* + * EZX Platform LED Driver for the Motorola E680(i) GSM Phone @@ -154,7 +154,7 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c + ledr_i = led_register_value[color].pcap_LEDR_I; + ledg_i = led_register_value[color].pcap_LEDG_I; + -+ ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue); ++ ezx_pcap_read(PCAP_REG_PERIPH,&tempValue); + + tempValue &= (~SSP_PCAP_LED_MASK); + @@ -166,7 +166,7 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c + (ledg_ctrl << 6) | (ledr_i << 10) | (ledg_i << 12) | + (skip << 14)) & 0x7fff) << SSP_PCAP_LED_SHIFT; + -+ ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue); ++ ezx_pcap_write(PCAP_REG_PERIPH,tempValue); +} + +static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value) @@ -275,9 +275,9 @@ Index: linux-2.6.21/drivers/leds/leds-e680.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 20:02:32.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 20:04:02.000000000 -0300 -@@ -347,11 +347,20 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:49:23.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:49:30.000000000 -0300 +@@ -339,11 +339,20 @@ }, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch index a0c1ebbfbe..e669a51957 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:58:54.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 20:02:32.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:48:32.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:49:23.000000000 -0300 @@ -16,6 +16,7 @@ #include <linux/mmc/host.h> #include <linux/irq.h> @@ -10,7 +10,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #include <asm/mach-types.h> #include <asm/mach/arch.h> -@@ -325,10 +326,32 @@ +@@ -317,10 +318,32 @@ .resource = pcap_ts_resources, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch index 40b56b9b6c..7f0826163d 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:45:27.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:53:10.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-07 11:32:30.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-07 11:54:44.000000000 -0300 @@ -13,6 +13,8 @@ #include <linux/init.h> #include <linux/platform_device.h> @@ -118,7 +118,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c static struct pxafb_mode_info mode_e680 = { .pixclock = 150000, .xres = 240, -@@ -144,6 +240,7 @@ +@@ -136,6 +232,7 @@ PSLR = 0x05800f00; set_pxa_fb_info(&e680_fb_info); diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch index e974be9b4e..12ce023749 100644 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:44:12.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-06-28 22:45:27.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:41:38.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:44:56.000000000 -0300 @@ -19,6 +19,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxafb.h> @@ -10,7 +10,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c #include "generic.h" -@@ -48,7 +49,85 @@ +@@ -48,7 +49,77 @@ .pxafb_lcd_power = &ezx_lcd_power, }; @@ -18,49 +18,41 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +static int __init e680_pcap_init(void) +{ + /* initialize PCAP registers */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); -+// ezx_pcap_vibrator_level(PCAP_VIBRATOR_VOLTAGE_LEVEL3); -+ + /* set SW1 sleep to keep SW1 1.3v in sync mode */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE10, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE11, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0); + + /* SW1 active in sync mode */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE00, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE01, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0); + + /* at SW1 -core voltage to 1.30V */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW10_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW11_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW12_DVS, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW13_DVS, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0); + + /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V3_LOWPWR, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V8_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0); + + /* + * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- + * camera for e680 + */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V4_LOWPWR, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_VREG2_V6_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0); + + /* set Vc to low power mode when AP sleep */ -+// SSP_PCAP_bit_set( SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VC_STBY); -+ -+ /* set VAUX2 to voltage 2.775V and low power mode when AP sleep */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_1, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_0, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_STBY, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_LOWPWR, 1); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, 1); ++// SSP_PCAP_bit_set( PCAP_BIT_LOWPWR_CTRL_VC_STBY); + -+// PGSR(GPIO34_TXENB) |= GPIO_bit(GPIO34_TXENB); ++ /* set VAUX2 to low power mode when AP sleep */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1); + + return 0; +} diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch index 7a7a1be7fd..109623c68c 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:56:21.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-08-01 19:58:54.000000000 -0300 -@@ -301,9 +301,34 @@ +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-07 11:10:47.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-07 11:11:01.000000000 -0300 +@@ -293,9 +293,34 @@ }, }; diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch index 4b1f39b7d2..1dda2e544c 100644 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch @@ -1,10 +1,12 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/sound/soc/codecs/pcap2.c 2007-08-04 22:20:36.000000000 -0300 -@@ -0,0 +1,709 @@ ++++ linux-2.6.21/sound/soc/codecs/pcap2.c 2007-09-07 14:28:32.000000000 -0300 +@@ -0,0 +1,796 @@ +/* -+ * pcap2.c -- Template Codec Audio driver ++ * pcap2.c - PCAP2 ASIC Audio driver ++ * ++ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as @@ -37,18 +39,19 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + +extern int ezx_pcap_write(u_int8_t, u_int32_t); +extern int ezx_pcap_read(u_int8_t, u_int32_t *); ++static struct snd_soc_device *pcap2_codec_socdev; + +/* + * Debug + */ + -+#define PCAP2_DEBUG 1 ++//#define PCAP2_DEBUG + +#ifdef PCAP2_DEBUG +#define dbg(format, arg...) \ + printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg) +#else -+#define dbg(format, arg...) do {} while (0) ++#define dbg(format, arg...) +#endif + +#define err(format, arg...) \ @@ -67,53 +70,89 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + + +/* -+ * write to the pcap2 codec register space ++ * ASoC limits register value to 16 bits and pcap uses 32 bit registers ++ * to work around this, we get 16 bits from low, mid or high positions. ++ * ASoC limits register number to 8 bits we use 0x1f for register ++ * number and 0xe0 for register offset. -WM + */ +static int pcap2_codec_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ -+ dbg("codec_write reg=%08x, val=%08x", reg, value); -+ ezx_pcap_write(reg, value); ++ unsigned int tmp; ++ ++ ezx_pcap_read((reg & 0x1f), &tmp); ++ ++ if (reg & SL) { ++ tmp &= 0xffff0000; ++ tmp |= (value & 0xffff); ++ } ++ else if (reg & SM) { ++ tmp &= 0xff0000ff; ++ tmp |= ((value << 8) & 0x00ffff00); ++ } ++ else if (reg & SH) { ++ tmp &= 0xffff; ++ tmp |= ((value << 16) & 0xffff0000); ++ } ++ else ++ tmp = value; ++ ++ dbg("codec_write reg=%x, rval=%08x, fval=%08x", reg, tmp, value); ++ ezx_pcap_write((reg & 0x1f), tmp); + return 0; + +} + +static unsigned int pcap2_codec_read(struct snd_soc_codec *codec, unsigned int reg) +{ -+ unsigned int ret; -+ -+ ezx_pcap_read(reg, &ret); -+ dbg("codec_read reg=%08x, val=%08x", reg, ret); ++ unsigned int tmp, ret; ++ ++ ezx_pcap_read((reg & 0x1f), &tmp); ++ ret = tmp; ++ if (reg & SL) ++ ret = (tmp & 0xffff); ++ else if (reg & SM) ++ ret = ((tmp >> 8) & 0xffff); ++ else if (reg & SH) ++ ret = ((tmp >> 16) & 0xffff); ++ ++ dbg("codec_read reg=%x, rval=%08x, fval=%08x", reg, tmp, ret); + return(ret); + +} + -+static const char *pcap2_amp_output[] = {"R L Stereo", "RL", "RL3db", "RL6db"}; ++static const char *pcap2_output_select[] = {"2ch", "2->1ch", "2->1ch -3db", "2->1ch -6db"}; + +static const struct soc_enum pcap2_enum[] = { -+SOC_ENUM_SINGLE(PCAP2_OUTPUT_AMP, 19, 4, pcap2_amp_output), ++SOC_ENUM_SINGLE((PCAP2_OUTPUT_AMP|SH), 3, 4, pcap2_output_select), ++}; ++ ++static const struct snd_kcontrol_new pcap2_input_mixer_controls[] = { ++SOC_DAPM_SINGLE("A3 Switch", (PCAP2_INPUT_AMP|SL), 6, 1, 0), ++SOC_DAPM_SINGLE("A5 Switch", (PCAP2_INPUT_AMP|SL), 8, 1, 0), ++}; + ++static const struct snd_kcontrol_new pcap2_output_mixer_controls[] = { ++SOC_DAPM_SINGLE("A1 Switch", (PCAP2_OUTPUT_AMP|SL), 0, 1, 0), ++SOC_DAPM_SINGLE("A2 Switch", (PCAP2_OUTPUT_AMP|SL), 1, 1, 0), ++SOC_DAPM_SINGLE("AR Switch", (PCAP2_OUTPUT_AMP|SL), 5, 1, 0), ++SOC_DAPM_SINGLE("AL Switch", (PCAP2_OUTPUT_AMP|SL), 6, 1, 0), +}; + +/* pcap2 codec non DAPM controls */ +static const struct snd_kcontrol_new pcap2_codec_snd_controls[] = { -+SOC_SINGLE("Output gain", PCAP2_OUTPUT_AMP, 13, 15, 0), -+SOC_SINGLE("Input gain", PCAP2_INPUT_AMP, 0, 31, 0), -+SOC_SINGLE("louderspeaker sw", PCAP2_OUTPUT_AMP, 1, 1, 0), -+SOC_SINGLE("Earpiece switch", PCAP2_OUTPUT_AMP, 0, 1, 0), -+SOC_SINGLE("Earpctrl switch", PCAP2_OUTPUT_AMP, 17, 1, 0), -+SOC_SINGLE("Aright switch", PCAP2_OUTPUT_AMP, 5, 1, 0), -+SOC_SINGLE("Aleft switch", PCAP2_OUTPUT_AMP, 6, 1, 0), -+//SOC_SINGLE("AHS switch", PCAP2_INPUT_AMP, 14, 1, 0), -+//SOC_SINGLE("pga in switch", PCAP2_OUTPUT_AMP, 10, 1, 0), -+SOC_ENUM("Output mode", pcap2_enum[0]), ++SOC_SINGLE("Output gain", (PCAP2_OUTPUT_AMP|SM), 5, 15, 0), ++SOC_SINGLE("Input gain", (PCAP2_INPUT_AMP|SL), 0, 31, 0), ++}; ++ ++static const struct snd_kcontrol_new pcap2_codec_dm_mux_control[] = { ++ SOC_DAPM_ENUM("Output Mode", pcap2_enum[0]), +}; + +/* add non dapm controls */ +static int pcap2_codec_add_controls(struct snd_soc_codec *codec) +{ + int err, i; -+ dbg("pcap2_codec_add_controls"); + + for (i = 0; i < ARRAY_SIZE(pcap2_codec_snd_controls); i++) { + if ((err = snd_ctl_add(codec->card, @@ -126,13 +165,67 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + +/* pcap2 codec DAPM controls */ +static const struct snd_soc_dapm_widget pcap2_codec_dapm_widgets[] = { ++ SND_SOC_DAPM_DAC("ST_DAC", "ST_DAC playback", SND_SOC_NOPM, 0, 0), ++ SND_SOC_DAPM_DAC("CDC_DAC", "CDC_DAC playback", SND_SOC_NOPM, 0, 0), ++ SND_SOC_DAPM_ADC("CDC_ADC", "CDC_DAC capture", SND_SOC_NOPM, 0, 0), ++ SND_SOC_DAPM_PGA("PGA_ST", (PCAP2_OUTPUT_AMP|SL), 9, 0, NULL, 0), ++ SND_SOC_DAPM_PGA("PGA_CDC", (PCAP2_OUTPUT_AMP|SL), 8, 0, NULL, 0), ++ SND_SOC_DAPM_PGA("PGA_R", (PCAP2_OUTPUT_AMP|SL), 11, 0, NULL, 0), ++ SND_SOC_DAPM_PGA("PGA_L", (PCAP2_OUTPUT_AMP|SL), 12, 0, NULL, 0), ++ SND_SOC_DAPM_MUX("Downmixer", SND_SOC_NOPM, 0, 0, pcap2_codec_dm_mux_control), ++ SND_SOC_DAPM_PGA("PGA_A1CTRL", (PCAP2_OUTPUT_AMP|SH), 1, 1, NULL, 0), ++ SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0, &pcap2_output_mixer_controls[0], ARRAY_SIZE(pcap2_output_mixer_controls)), ++ SND_SOC_DAPM_OUTPUT("A1"), /* Earpiece */ ++ SND_SOC_DAPM_OUTPUT("A2"), /* LoudSpeaker */ ++ SND_SOC_DAPM_OUTPUT("AR"), /* headset right */ ++ SND_SOC_DAPM_OUTPUT("AL"), /* headset left */ ++ ++ SND_SOC_DAPM_MICBIAS("BIAS1", (PCAP2_INPUT_AMP|SL), 10, 0), ++ SND_SOC_DAPM_MICBIAS("BIAS2", (PCAP2_INPUT_AMP|SL), 11, 0), ++ SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, &pcap2_input_mixer_controls[0], ARRAY_SIZE(pcap2_input_mixer_controls)), ++ SND_SOC_DAPM_INPUT("A3"), /* Headset Mic */ ++ SND_SOC_DAPM_INPUT("A5"), /* Builtin Mic */ +}; + -+/* -+ * template codec audio interconnectiosn between sink and source. -+ */ +static const char *audio_map[][3] = { ++ { "A1", NULL, "Output Mixer" }, ++ { "A2", NULL, "Output Mixer" }, ++ { "AR", NULL, "Output Mixer" }, ++ { "AL", NULL, "Output Mixer" }, ++ ++ { "Output Mixer", "A1 Switch", "PGA_A1CTRL" }, ++ { "Output Mixer", "A2 Switch", "Downmixer" }, ++ { "Output Mixer", "AR Switch", "PGA_R" }, ++ { "Output Mixer", "AL Switch", "PGA_L" }, ++ ++ { "PGA_A1CTRL", NULL, "Downmixer" }, ++ ++ { "Downmixer", "2->1ch", "PGA_L" }, ++ { "Downmixer", "2->1ch", "PGA_R" }, ++ { "Downmixer", "2->1ch -3db", "PGA_L" }, ++ { "Downmixer", "2->1ch -3db", "PGA_R" }, ++ { "Downmixer", "2->1ch -6db", "PGA_L" }, ++ { "Downmixer", "2->1ch -6db", "PGA_R" }, ++ { "Downmixer", "2ch", "PGA_R" }, ++ ++ { "PGA_R", NULL, "PGA_ST" }, ++ { "PGA_L", NULL, "PGA_ST" }, ++ { "PGA_R", NULL, "PGA_CDC" }, ++ ++ { "PGA_ST", NULL, "ST_DAC" }, ++ { "PGA_CDC", NULL, "CDC_DAC" }, ++ ++ /* input path */ ++ { "BIAS1", NULL, "A3" }, ++ { "BIAS2", NULL, "A5" }, + ++ { "Input Mixer", "A3 Switch", "BIAS1" }, ++ { "Input Mixer", "A5 Switch", "BIAS2" }, ++ ++ { "PGA_R", NULL, "Input Mixer" }, ++ ++ { "PGA_CDC", NULL, "PGA_R" }, ++ { "CDC_ADC", NULL, "PGA_CDC" }, + + /* terminator */ + {NULL, NULL, NULL}, @@ -141,7 +234,6 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c +static int pcap2_codec_add_widgets(struct snd_soc_codec *codec) +{ + int i; -+ dbg("pcap2_codec_add_widgets"); + + for(i = 0; i < ARRAY_SIZE(pcap2_codec_dapm_widgets); i++) { + snd_soc_dapm_new_control(codec, &pcap2_codec_dapm_widgets[i]); @@ -157,118 +249,213 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + return 0; +} + -+/* -+ * Alsa operations -+ * Only implement the required operations for your platform. -+ * These operations are specific to the codec only. -+ */ -+ -+ /* -+ * Called by ALSA when a PCM substream is opened, private data can be allocated. -+ */ -+static int pcap2mono_codec_startup(struct snd_pcm_substream *substream) ++static int pcap2_codec_dapm_event(struct snd_soc_codec *codec, int event) +{ -+ dbg("pcap2 codec startup"); ++ unsigned int input = pcap2_codec_read(codec, PCAP2_INPUT_AMP); + ++ input &= ~PCAP2_INPUT_AMP_LOWPWR; ++ ++ switch (event) { ++ case SNDRV_CTL_POWER_D0: ++ case SNDRV_CTL_POWER_D1: ++ case SNDRV_CTL_POWER_D2: ++ case SNDRV_CTL_POWER_D3hot: /* Off, with power */ ++ dbg("dapm: ON\n"); ++ break; ++ case SNDRV_CTL_POWER_D3cold: /* Off, without power */ ++ input |= PCAP2_INPUT_AMP_LOWPWR; ++ dbg("dapm: OFF\n"); ++ break; ++ } ++ codec->dapm_state = event; ++ pcap2_codec_write(codec, PCAP2_INPUT_AMP, input); + return 0; +} + -+/* -+ * Called by ALSA when a PCM substream is closed. Private data can be -+ * freed here. -+ */ -+static int pcap2mono_codec_shutdown(struct snd_pcm_substream *substream) ++static int pcap2_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_device *socdev = rtd->socdev; -+ struct snd_soc_codec *codec = socdev->codec; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_codec *codec = codec_dai->codec; ++ unsigned int tmp; + -+ dbg("pcap2mono codec shutdown"); ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); + -+ pcap2_codec_write(codec, PCAP2_CODEC, 0); -+ return 0; -+} ++ tmp &= ~PCAP2_ST_DAC_RATE_MASK; ++ switch(params_rate(params)) { ++ case 8000: ++ break; ++ case 11025: ++ tmp |= PCAP2_ST_DAC_RATE_11025; ++ break; ++ case 12000: ++ tmp |= PCAP2_ST_DAC_RATE_12000; ++ break; ++ case 16000: ++ tmp |= PCAP2_ST_DAC_RATE_16000; ++ break; ++ case 22050: ++ tmp |= PCAP2_ST_DAC_RATE_22050; ++ break; ++ case 24000: ++ tmp |= PCAP2_ST_DAC_RATE_24000; ++ break; ++ case 32000: ++ tmp |= PCAP2_ST_DAC_RATE_32000; ++ break; ++ case 44100: ++ tmp |= PCAP2_ST_DAC_RATE_44100; ++ break; ++ case 48000: ++ tmp |= PCAP2_ST_DAC_RATE_48000; ++ break; ++ default: ++ return -EINVAL; ++ } ++ tmp |= PCAP2_ST_DAC_RESET_DF; ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); + -+/* -+ * Called by ALSA when the hardware params are set by application. This -+ * function can also be called multiple times and can allocate buffers -+ * (using snd_pcm_lib_* ). It's non-atomic. -+ */ -+static int pcap2mono_codec_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+// u_int32_t tmp; -+ dbg("pcap2mono_codec_hw_params"); ++ tmp &= ~PCAP2_CODEC_RATE_MASK; ++ switch(params_rate(params)) { ++ case 8000: ++ break; ++ case 16000: ++ tmp |= PCAP2_CODEC_RATE_16000; ++ break; ++ default: ++ return -EINVAL; ++ } ++ tmp |= PCAP2_CODEC_RESET_DF; ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } + + return 0; +} + -+/* -+ * Free's resources allocated by hw_params, can be called multiple times -+ */ -+static int pcap2mono_codec_hw_free(struct snd_pcm_substream *substream) ++static int pcap2_hw_free(struct snd_pcm_substream *substream) +{ -+ dbg("pcap2mono_codec_hw_free"); -+ return 0; -+} ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_codec *codec = codec_dai->codec; ++ struct snd_soc_dapm_widget *w; ++ unsigned int tmp; + -+static int pcap2_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, -+ int clk_id, unsigned int freq, int dir) -+{ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0); ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ tmp &= ~(PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0); ++ else ++ snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0); ++ list_for_each_entry(w, &codec->dapm_widgets, list) { ++ if ((!strcmp(w->name, "CDC_DAC") || !strcmp(w->name, "CDC_ADC")) && w->connected) ++ goto in_use; ++ } ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ tmp &= ~(PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++in_use: ++ snd_soc_dapm_sync_endpoints(codec); + -+ dbg("pcap2 set dai sysclk"); + return 0; +} + -+static int pcap2_set_dai_pll(struct snd_soc_codec_dai *codec_dai, -+ int pll_id, unsigned int freq_in, unsigned int freq_out) ++static int pcap2_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, ++ int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; -+ u_int32_t tmp; -+ -+ dbg("pcap2 set dai pll"); + ++ unsigned int tmp; + if (codec_dai->id == PCAP2_STEREO_DAI) { + /* ST_DAC */ -+ dbg("stereo codec not supported yet."); -+ return -ENODEV; ++ ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ ++ tmp &= ~PCAP2_ST_DAC_CLKSEL_MASK; ++ switch (clk_id) { ++ case PCAP2_CLK_AP: ++ tmp |= PCAP2_ST_DAC_CLKSEL_AP; ++ break; ++ case PCAP2_CLK_BP: ++ break; ++ default: ++ return -ENODEV; ++ } ++ ++ tmp &= ~PCAP2_ST_DAC_CLK_MASK; ++ switch (freq) { ++ case 13000000: ++ break; ++/* case 15M36: ++ tmp |= PCAP2_ST_DAC_CLK_15M36; ++ break; ++ case 16M8: ++ tmp |= PCAP2_ST_DAC_CLK_16M8; ++ break; ++ case 19M44: ++ tmp |= PCAP2_ST_DAC_CLK_19M44; ++ break; ++*/ case 26000000: ++ tmp |= PCAP2_ST_DAC_CLK_26M; ++ break; ++/* case EXT_MCLK: ++ tmp |= PCAP2_ST_DAC_CLK_MCLK; ++ break; ++ case FSYNC: ++ tmp |= PCAP2_ST_DAC_CLK_FSYNC; ++ break; ++ case BITCLK: ++ tmp |= PCAP2_ST_DAC_CLK_BITCLK; ++ break; ++*/ default: ++ return -EINVAL; ++ } ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); + } + else { + /* MONO_DAC */ + tmp = pcap2_codec_read(codec, PCAP2_CODEC); + -+ tmp &= ~0x10000; -+ switch (pll_id) { -+ case PCAP2_PLL_AP: -+ tmp |= 0x10000; ++ tmp &= ~PCAP2_CODEC_CLKSEL_MASK; ++ switch (clk_id) { ++ case PCAP2_CLK_AP: ++ tmp |= PCAP2_CODEC_CLKSEL_AP; + break; -+ case PCAP2_PLL_BP: ++ case PCAP2_CLK_BP: + break; + default: + return -ENODEV; + } + -+ tmp &= ~0x1c0; -+ switch (freq_in) { ++ tmp &= ~PCAP2_CODEC_CLK_MASK; ++ switch (freq) { + case 13000000: + break; +/* case 15M36: -+ tmp |= 0x40; ++ tmp |= PCAP2_CODEC_CLK_15M36; + break; + case 16M8: -+ tmp |= 0x80; ++ tmp |= PCAP2_CODEC_CLK_16M8; + break; + case 19M44: -+ tmp |= 0xc0; ++ tmp |= PCAP2_CODEC_CLK_19M44; + break; +*/ case 26000000: -+ tmp |= 0x100; ++ tmp |= PCAP2_CODEC_CLK_26M; + break; + default: + return -EINVAL; + } -+ -+ + pcap2_codec_write(codec, PCAP2_CODEC, tmp); + } + return 0; @@ -278,26 +465,19 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; -+ u_int32_t tmp = 0; -+ -+ dbg("pcap2_set_dai_fmt"); ++ unsigned int tmp = 0; + + if (codec_dai->id == PCAP2_STEREO_DAI) { + /* ST_DAC */ -+ dbg("stereo codec not supported yet."); -+ return -ENODEV; -+ } -+ else { -+ /* MONO_DAC */ + -+ /* disable ST_DAC */ -+ pcap2_codec_write(codec, PCAP2_ST_DAC, 0); ++ /* disable CODEC */ ++ pcap2_codec_write(codec, PCAP2_CODEC, 0); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + break; + case SND_SOC_DAIFMT_CBS_CFS: -+ tmp |= 0x2; ++ tmp |= 0x1; + break; + default: + return -EINVAL; @@ -320,6 +500,50 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + case SND_SOC_DAIFMT_IB_IF: + break; + case SND_SOC_DAIFMT_NB_NF: ++ tmp |= 0x60000; ++ break; ++ case SND_SOC_DAIFMT_IB_NF: ++ tmp |= 0x40000; ++ break; ++ case SND_SOC_DAIFMT_NB_IF: ++ tmp |= 0x20000; ++ break; ++ } ++ /* set dai to AP */ ++ tmp |= 0x1000; ++ ++ /* set BCLK */ ++ tmp |= 0x18000; ++ ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ /* MONO_DAC */ ++ ++ /* disable ST_DAC */ ++ pcap2_codec_write(codec, PCAP2_ST_DAC, 0); ++ ++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBM_CFM: ++ break; ++ case SND_SOC_DAIFMT_CBS_CFS: ++ tmp |= 0x2; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_DSP_B: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_IB_IF: ++ break; ++ case SND_SOC_DAIFMT_NB_NF: + tmp |= 0x600; + break; + case SND_SOC_DAIFMT_IB_NF: @@ -333,173 +557,44 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + /* set dai to AP */ + tmp |= 0x8000; + ++ tmp |= 0x5; /* IHF / OHF */ ++ + pcap2_codec_write(codec, PCAP2_CODEC, tmp); + } + return 0; +} + ++static int pcap2_prepare(struct snd_pcm_substream *substream) ++{ + -+#if 0 -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A1_CONFIG, 1); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AHS_CONFIG, 1); -+ -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK_EN, 0); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_EN, 0); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_SMB_ST_DAC,1); -+ -+// dbg ("configure pcap to use ap clock"); -+// OSCC |= 0x00000008; -+// pxa_gpio_mode(AP_13MHZ_OUTPUT_PIN | GPIO_ALT_FN_3_OUT); -+ -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_IN_SEL, 1); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_CLK_IN_SEL, 1); -+ -+ -+ -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); -+ -+ -+ -+ -+ /* configure bitclk, pllclock, mode */ -+ ezx_pcap_write(PCAP2_ST_DAC, 0); -+ -+ tmp = PCAP_CDC_CLK_IN_13M0; -+ ezx_pcap_write(PCAP2_CODEC, tmp); -+ -+ /* codec 0=master 1=slave */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_SMB, 0); -+ -+ /* bitrate 0=8k 1=16k */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_FS_8K_16K, 0); -+ -+ /* clock source */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_IN_SEL,1); -+ -+ /* dai select 0=neptune 1=pxa */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_DIG_AUD_IN,1); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_AUDIHPF,1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_AUDOHPF,1); -+ -+ /* clock/frame inv */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_INV,0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_FS_INV,0); -+ -+ /*(3) reset digital filter(DF_RESET=1) */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_DF_RESET,1); -+ -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_ADITH,0); -+ -+ /* (4) enable pcap clk(CDC_CLK_EN=1),enable CODEC(CDC_EN=1) */ -+ -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_CD_BYP,0); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_CLK_EN,1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_EN,1); ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_codec *codec = codec_dai->codec; ++ unsigned int tmp; ++ /* FIXME enable clock only if codec is master */ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ snd_soc_dapm_set_endpoint(codec, "ST_DAC", 1); ++ snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0); ++ snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0); ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ tmp |= (PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 1); ++ else ++ snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 1); ++ snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0); ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ tmp |= (PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ snd_soc_dapm_sync_endpoints(codec); + mdelay(1); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_ST_DAC_SW, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_CDC_SW, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_IN_SW, 0); -+ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_R_EN, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_L_EN, 0); -+ -+ /* set default output to louderspeaker while developing */ -+ ezx_pcap_read(SSP_PCAP_ADJ_AUD_RX_AMPS_REGISTER, &tmp); -+ tmp &= ~SSP_PCAP_MONO_PGA_MASK; -+ tmp |= PCAP_MONO_PGA_RL; -+ ezx_pcap_write(SSP_PCAP_ADJ_AUD_RX_AMPS_REGISTER, tmp); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A2_EN, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A2_CONFIG, 1); -+ -+ /* set default input to handset while developing */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_MB_ON1, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A5_EN, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A5_MUX, 1); -+ -+ -+ ++#ifdef PCAP2_DEBUG + dump_registers(); -+ -+ -+ return 0; -+} -+ +#endif -+ -+/* -+ * Starts (Triggers) audio playback or capture. -+ * Usually only needed for DMA -+ */ -+static int pcap2mono_codec_trigger(struct snd_pcm_substream *substream, int cmd) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_device *socdev = rtd->socdev; -+ struct snd_soc_codec *codec = socdev->codec; -+ u_int32_t tmp; -+ -+ dbg("pcap2mono_codec_trigger"); -+ tmp = pcap2_codec_read(codec, PCAP2_CODEC); -+ -+ -+ /* reset digital filter */ -+ tmp |= 0x800; -+ -+ /* enable codec */ -+ tmp |= 0x1000; -+ -+ /* enable codec clock */ -+ tmp |= 0x2000; -+ -+ pcap2_codec_write(codec, PCAP2_CODEC, tmp); -+ -+ dump_registers(); -+ return 0; -+} -+ -+/* -+ * Called by ALSA when the PCM substream is prepared, can set format, sample -+ * rate, etc. This function is non atomic and can be called multiple times, -+ * it can refer to the runtime info. -+ */ -+static int pcap2mono_codec_prepare(struct snd_pcm_substream *substream) -+{ -+ dbg("pcap2mono_codec_prepare"); -+ return 0; -+} -+ -+/* -+ * Codec DAPM event handler -+ * This handles codec level DAPM events -+ */ -+static int pcap2_codec_dapm_event(struct snd_soc_codec *codec, int event) -+{ -+ switch (event) { -+ case SNDRV_CTL_POWER_D0: /* full On */ -+ /* e.g. vref/mid, osc on, */ -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); -+ break; -+ case SNDRV_CTL_POWER_D1: /* partial On */ -+ case SNDRV_CTL_POWER_D2: /* partial On */ -+ break; -+ case SNDRV_CTL_POWER_D3hot: /* Off, with power */ -+ /* everything off except vref/vmid, */ -+ dbg("power on pcap codec"); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR, 0); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); -+// ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2, 1); -+ break; -+ case SNDRV_CTL_POWER_D3cold: /* Off, without power */ -+ /* everything off, dac mute, inactive */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR, 1); -+ break; -+ } -+ codec->dapm_state = event; + return 0; +} + @@ -510,35 +605,28 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c +{ + .name = "PCAP2 MONO", + .id = 0, -+ /* playback and capture stream info */ + .playback = { -+ .stream_name = "mono playback", ++ .stream_name = "CDC_DAC playback", + .channels_min = 1, + .channels_max = 1, + .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { -+ .stream_name = "mono capture", ++ .stream_name = "CDC_DAC capture", + .channels_min = 1, + .channels_max = 1, + .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, -+ /* codec operations */ -+ /* alsa PCM operations */ + .ops = { -+ .startup = pcap2mono_codec_startup, -+ .shutdown = pcap2mono_codec_shutdown, -+ .prepare = pcap2mono_codec_prepare, -+ .trigger = pcap2mono_codec_trigger, -+ .hw_params = pcap2mono_codec_hw_params, -+ .hw_free = pcap2mono_codec_hw_free,}, ++ .prepare = pcap2_prepare, ++ .hw_params = pcap2_hw_params, ++ .hw_free = pcap2_hw_free, ++ }, + .dai_ops = { +// .digital_mute = pcap2_mute, + .set_fmt = pcap2_set_dai_fmt, -+// .set_clkdiv = pcap2_set_dai_clkdiv, -+ .set_pll = pcap2_set_dai_pll, + .set_sysclk = pcap2_set_dai_sysclk, + }, +}, @@ -546,25 +634,33 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + .name = "PCAP2 STEREO", + .id = 1, + .playback = { -+ .stream_name = "stereo playback", -+ .channels_min = 2, ++ .stream_name = "ST_DAC playback", ++ .channels_min = 1, + .channels_max = 2, -+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_44100), ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | ++ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | ++ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | ++ SNDRV_PCM_RATE_48000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .capture = { /* FIXME: PCAP support this?? */ ++ .stream_name = "ST_DAC capture", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | ++ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | ++ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | ++ SNDRV_PCM_RATE_48000), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = { -+// .startup = pcap2stereo_codec_startup, -+// .shutdown = pcap2stereo_codec_shutdown, -+// .prepare = pcap2stereo_codec_prepare, -+// .trigger = pcap2stereo_codec_trigger, -+// .hw_params = pcap2stereo_codec_hw_params, -+// .hw_free = pcap2stereo_codec_hw_free, ++ .prepare = pcap2_prepare, ++ .hw_params = pcap2_hw_params, ++ .hw_free = pcap2_hw_free, + }, + .dai_ops = { +// .digital_mute = pcap2_mute, + .set_fmt = pcap2_set_dai_fmt, -+// .set_clkdiv = pcap2_set_dai_clkdiv, -+ .set_pll = pcap2_set_dai_pll, + .set_sysclk = pcap2_set_dai_sysclk, + }, +}, @@ -572,25 +668,20 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + .name = "PCAP2 BP", + .id = 2, + .playback = { -+ .stream_name = "baseband playback", ++ .stream_name = "BP playback", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = { -+ .startup = pcap2mono_codec_startup, -+// .shutdown = pcap2mono_codec_shutdown, -+ .prepare = pcap2mono_codec_prepare, -+ .trigger = pcap2mono_codec_trigger, -+ .hw_params = pcap2mono_codec_hw_params, -+ .hw_free = pcap2mono_codec_hw_free, ++ .prepare = pcap2_prepare, ++ .hw_params = pcap2_hw_params, ++ .hw_free = pcap2_hw_free, + }, + .dai_ops = { +// .digital_mute = pcap2_mute, + .set_fmt = pcap2_set_dai_fmt, -+// .set_clkdiv = pcap2_set_dai_clkdiv, -+ .set_pll = pcap2_set_dai_pll, + .set_sysclk = pcap2_set_dai_sysclk, + }, +}, @@ -625,8 +716,8 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c +static int pcap2_codec_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; -+ int reg, ret = 0; -+ ++ int ret = 0; ++ + dbg("pcap2_codec_init"); + codec->name = "PCAP2 Audio"; + codec->owner = THIS_MODULE; @@ -651,15 +742,11 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c + if (ret < 0) { + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); -+ dbg("erro registrando\n"); + } + + return ret; +} + -+static struct snd_soc_device *pcap2_codec_socdev; -+ -+ +static int pcap2_codec_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); @@ -703,8 +790,8 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c +struct snd_soc_codec_device soc_codec_dev_pcap2 = { + .probe = pcap2_codec_probe, + .remove = pcap2_codec_remove, -+// .suspend = pcap2_codec_suspend, -+// .resume = pcap2_codec_resume, ++ .suspend = pcap2_codec_suspend, ++ .resume = pcap2_codec_resume, +}; + +EXPORT_SYMBOL_GPL(soc_codec_dev_pcap2); @@ -715,8 +802,8 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.c Index: linux-2.6.21/sound/soc/codecs/pcap2.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/sound/soc/codecs/pcap2.h 2007-08-04 02:06:01.000000000 -0300 -@@ -0,0 +1,31 @@ ++++ linux-2.6.21/sound/soc/codecs/pcap2.h 2007-09-07 12:13:49.000000000 -0300 +@@ -0,0 +1,81 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as @@ -726,23 +813,73 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.h +#ifndef _PCAP2_H +#define _PCAP2_H + -+/* PCAP2 register space */ -+ -+#define PCAP2_OUTPUT_AMP 0x0c -+#define PCAP2_ST_DAC 0x0d -+#define PCAP2_INPUT_AMP 0x1a -+#define PCAP2_CODEC 0x0b ++/* 16 bit reads/writes on pcap registers (ugly workaround) */ ++#define SL (1 << 5) /* lower 16 bits */ ++#define SM (1 << 6) /* mid 16 bits */ ++#define SH (1 << 7) /* higher 16 bits */ + -+#define PCAP2_MONO_DAI 0 -+#define PCAP2_STEREO_DAI 1 -+#define PCAP2_BP_DAI 2 -+ -+#define PCAP2_PLL_BP 0 -+#define PCAP2_PLL_AP 1 -+ -+//struct template_codec_setup_data { -+// unsigned short i2c_address; -+//}; ++/* PCAP2 register space */ ++#define PCAP2_CODEC 0x0b ++#define PCAP2_OUTPUT_AMP 0x0c ++#define PCAP2_ST_DAC 0x0d ++#define PCAP2_INPUT_AMP 0x1a ++ ++#define PCAP2_MONO_DAI 0 ++#define PCAP2_STEREO_DAI 1 ++#define PCAP2_BP_DAI 2 ++ ++#define PCAP2_CLK_BP 0 ++#define PCAP2_CLK_AP 1 ++ ++#define PCAP2_CODEC_EN 0x2000 ++#define PCAP2_CODEC_CLK_EN 0x1000 ++#define PCAP2_CODEC_RESET_DF 0x800 ++#define PCAP2_CODEC_RATE_MASK 0x4000 ++#define PCAP2_CODEC_RATE_8000 0x0 ++#define PCAP2_CODEC_RATE_16000 0x4000 ++#define PCAP2_CODEC_CLKSEL_MASK 0x10000 ++#define PCAP2_CODEC_CLKSEL_AP 0x10000 ++#define PCAP2_CODEC_CLKSEL_BP 0x0 ++#define PCAP2_CODEC_CLK_MASK 0x1c0 ++#define PCAP2_CODEC_CLK_13M 0x0 ++#define PCAP2_CODEC_CLK_15M36 0x40 ++#define PCAP2_CODEC_CLK_16M8 0x80 ++#define PCAP2_CODEC_CLK_19M44 0xc0 ++#define PCAP2_CODEC_CLK_26M 0x100 ++ ++#define PCAP2_ST_DAC_EN 0x80 ++#define PCAP2_ST_DAC_CLK_EN 0x20 ++#define PCAP2_ST_DAC_RESET_DF 0x40 ++#define PCAP2_ST_DAC_RATE_MASK 0xf00 ++#define PCAP2_ST_DAC_RATE_8000 0x0 ++#define PCAP2_ST_DAC_RATE_11025 0x100 ++#define PCAP2_ST_DAC_RATE_12000 0x200 ++#define PCAP2_ST_DAC_RATE_16000 0x300 ++#define PCAP2_ST_DAC_RATE_22050 0x400 ++#define PCAP2_ST_DAC_RATE_24000 0x500 ++#define PCAP2_ST_DAC_RATE_32000 0x600 ++#define PCAP2_ST_DAC_RATE_44100 0x700 ++#define PCAP2_ST_DAC_RATE_48000 0x800 ++#define PCAP2_ST_DAC_CLKSEL_MASK 0x80000 ++#define PCAP2_ST_DAC_CLKSEL_AP 0x80000 ++#define PCAP2_ST_DAC_CLKSEL_BP 0x0 ++#define PCAP2_ST_DAC_CLK_MASK 0x1c ++#define PCAP2_ST_DAC_CLK_13M 0x0 ++#define PCAP2_ST_DAC_CLK_15M36 0x4 ++#define PCAP2_ST_DAC_CLK_16M8 0x8 ++#define PCAP2_ST_DAC_CLK_19M44 0xc ++#define PCAP2_ST_DAC_CLK_26M 0x10 ++#define PCAP2_ST_DAC_CLK_MCLK 0x14 ++#define PCAP2_ST_DAC_CLK_FSYNC 0x18 ++#define PCAP2_ST_DAC_CLK_BITCLK 0x1c ++ ++#define PCAP2_INPUT_AMP_LOWPWR 0x80000 ++#define PCAP2_INPUT_AMP_V2EN2 0x200000 ++ ++#define PCAP2_OUTPUT_AMP_PGAR_EN 0x800 ++#define PCAP2_OUTPUT_AMP_PGAL_EN 0x1000 ++#define PCAP2_OUTPUT_AMP_CDC_SW 0x100 ++#define PCAP2_OUTPUT_AMP_ST_DAC_SW 0x200 + +extern struct snd_soc_codec_dai pcap2_dai[]; +extern struct snd_soc_codec_device soc_codec_dev_pcap2; @@ -750,8 +887,8 @@ Index: linux-2.6.21/sound/soc/codecs/pcap2.h +#endif Index: linux-2.6.21/sound/soc/pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/sound/soc/pxa/Kconfig 2007-08-02 22:58:17.000000000 -0300 -+++ linux-2.6.21/sound/soc/pxa/Kconfig 2007-08-02 22:58:34.000000000 -0300 +--- linux-2.6.21.orig/sound/soc/pxa/Kconfig 2007-09-07 12:13:43.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/Kconfig 2007-09-07 12:13:49.000000000 -0300 @@ -60,4 +60,13 @@ Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C6000x models (Tosa). @@ -769,9 +906,13 @@ Index: linux-2.6.21/sound/soc/pxa/Kconfig Index: linux-2.6.21/sound/soc/pxa/ezx.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/sound/soc/pxa/ezx.c 2007-08-04 22:35:25.000000000 -0300 -@@ -0,0 +1,296 @@ ++++ linux-2.6.21/sound/soc/pxa/ezx.c 2007-09-07 13:12:24.000000000 -0300 +@@ -0,0 +1,349 @@ +/* ++ * ezx.c - Machine specific code for EZX phones ++ * ++ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your @@ -794,11 +935,37 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c +#include <asm/arch/pxa-regs.h> +#include <asm/arch/hardware.h> + ++#include <asm/arch/ezx-pcap.h> ++ +#include "../codecs/pcap2.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ssp.h" + +#define GPIO_HW_ATTENUATE_A780 96 ++ ++static struct snd_soc_codec *control_codec; ++ ++static void ezx_ext_control(struct snd_soc_codec *codec) ++{ ++ if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_A1))) ++ snd_soc_dapm_set_endpoint(codec, "Headset", 1); ++ else ++ snd_soc_dapm_set_endpoint(codec, "Headset", 0); ++ if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_MB2))) ++ snd_soc_dapm_set_endpoint(codec, "External Mic", 1); ++ else ++ snd_soc_dapm_set_endpoint(codec, "External Mic", 0); ++ ++ snd_soc_dapm_sync_endpoints(codec); ++} ++ ++static irqreturn_t jack_irq(int irq, void *data) ++{ ++ ezx_ext_control(control_codec); ++ return IRQ_HANDLED; ++} ++ ++ +/* + * Alsa operations + * Only implement the required operations for your platform. @@ -810,7 +977,11 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + */ +static int ezx_machine_startup(struct snd_pcm_substream *substream) +{ -+ printk("ezx_machine_startup\n"); ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->socdev->codec; ++ ++ /* check the jack status at stream startup */ ++ ezx_ext_control(codec); + return 0; +} + @@ -827,21 +998,28 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + -+ + /* set codec DAI configuration */ -+ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | -+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if (codec_dai->id == PCAP2_STEREO_DAI) ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM); ++ else ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); + if(ret < 0) + return ret; + -+ /* set PLL source */ -+ ret = codec_dai->dai_ops.set_pll(codec_dai, PCAP2_PLL_AP, 13000000, -1); ++ /* Turn on clock output on CLK_PIO */ ++ OSCC |= 0x8; ++ ++ /* set clock source */ ++ ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_AP, ++ 13000000, SND_SOC_CLOCK_IN); + if(ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B | -+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + @@ -849,10 +1027,11 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + if (ret < 0) + return ret; + -+ ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_PLL, 0, SND_SOC_CLOCK_IN); ++ ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_EXT, ++ 0, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; -+ ++ + return 0; +} + @@ -861,26 +1040,22 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + */ +static int ezx_machine_hw_free(struct snd_pcm_substream *substream) +{ -+ -+ printk("ezx_machine_hw_free\n"); ++ OSCC &= ~0x8; /* turn off clock output on CLK_PIO */ + + return 0; +} + +static int ezx_machine_prepare(struct snd_pcm_substream *substream) +{ -+ int timeout = 0; -+ while(((SSSR_P(3) & SSSR_CSS) != 0) && (timeout++ < 10000000)); -+ -+ if (timeout >= 10000000) -+ printk("clock sync timeout!\n"); -+ else -+ printk("clock sync passed %d\n", timeout); ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; + -+// printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x SSACD %x\n", -+// SSCR0_P(3), SSCR1_P(3), -+// SSTO_P(3), SSPSP_P(3), -+// SSSR_P(3), SSACD_P(3)); ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ /* override pxa2xx-ssp sample size for stereo/network mode */ ++ SSCR0_P(cpu_dai->id+1) &= ~(SSCR0_DSS | SSCR0_EDSS); ++ SSCR0_P(cpu_dai->id+1) |= (SSCR0_EDSS | SSCR0_DataSize(16)); ++ } + return 0; +} + @@ -897,39 +1072,41 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; -+ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; -+ int ret; -+ printk("bp_hw_params\n"); ++// struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret = 0; + /* set codec DAI configuration */ + ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | + SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); + if(ret < 0) + return ret; + -+ /* set PLL source */ -+ ret = codec_dai->dai_ops.set_pll(codec_dai, PCAP2_PLL_BP, 13000000, -1); -+ if(ret < 0) -+ return ret; ++ /* set clock source */ ++ ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_BP, ++ 13000000, SND_SOC_CLOCK_IN); + -+ /* set cpu DAI configuration */ -+// ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B | -+// SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); -+// if (ret < 0) -+// return ret; -+ -+// ret = cpu_dai->dai_ops.set_tristate(cpu_dai, 0); -+// if (ret < 0) -+// return ret; -+ -+// ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_PLL, 0, SND_SOC_CLOCK_IN); -+// if (ret < 0) -+// return ret; -+ -+ return 0; ++ return ret; +} + ++ ++ ++/* machine dapm widgets */ ++static const struct snd_soc_dapm_widget ezx_dapm_widgets[] = { ++ SND_SOC_DAPM_HP("Headset", NULL), ++ SND_SOC_DAPM_SPK("Earpiece", NULL), ++ SND_SOC_DAPM_SPK("Loudspeaker", NULL), ++ SND_SOC_DAPM_MIC("Built-in Mic", NULL), ++ SND_SOC_DAPM_MIC("External Mic", NULL), ++}; ++ +/* machine audio map (connections to the codec pins) */ +static const char *audio_map[][3] = { ++ { "Headset", NULL, "AR" }, ++ { "Headset", NULL, "AL" }, ++ { "Earpiece", NULL, "A1" }, ++ { "Loudspeaker", NULL, "A2" }, ++ ++ { "Built-in Mic", NULL, "A5" }, ++ { "External Mic", NULL, "A3" }, + + {NULL, NULL, NULL}, +}; @@ -939,14 +1116,26 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + */ +static int ezx_machine_init(struct snd_soc_codec *codec) +{ -+ printk("ezx machine init\n"); ++ int i; + /* mark unused codec pins as NC */ ++// snd_soc_dapm_set_endpoint(codec, "FIXME", 0); ++ control_codec = codec; ++ ++ /* Add ezx specific controls */ ++// for (i = 0; i < ARRAY_SIZE(ezx_controls); i++) { ++// if ((err = snd_ctl_add(codec->card, snd_soc_cnew(&ezx_controls[i], codec, NULL))) < 0) ++// return err; ++// } ++ ++ /* Add ezx specific widgets */ ++ for(i = 0; i < ARRAY_SIZE(ezx_dapm_widgets); i++) { ++ snd_soc_dapm_new_control(codec, &ezx_dapm_widgets[i]); ++ } ++ /* Set up ezx specific audio path interconnects */ ++ for(i = 0; audio_map[i][0] != NULL; i++) { ++ snd_soc_dapm_connect_input(codec, audio_map[i][0], audio_map[i][1], audio_map[i][2]); ++ } + -+ /* Add template specific controls */ -+ -+ /* Add template specific widgets */ -+ -+ /* Set up template specific audio path audio_map */ + /* synchronise subsystem */ + snd_soc_dapm_sync_endpoints(codec); + return 0; @@ -980,19 +1169,19 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c +/* template digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link ezx_dai[] = { +{ -+ .name = "PCAP2 MONO", -+ .stream_name = "mono playback", ++ .name = "PCAP2 STEREO", ++ .stream_name = "stereo playback", + .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3], -+ .codec_dai = &pcap2_dai[PCAP2_MONO_DAI], ++ .codec_dai = &pcap2_dai[PCAP2_STEREO_DAI], + .init = ezx_machine_init, + .ops = &ezx_ops, +}, +{ -+ .name = "PCAP2 STEREO", -+ .stream_name = "stereo playback", ++ .name = "PCAP2 MONO", ++ .stream_name = "mono playback", + .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3], -+ .codec_dai = &pcap2_dai[PCAP2_STEREO_DAI], -+ .init = ezx_machine_init, ++ .codec_dai = &pcap2_dai[PCAP2_MONO_DAI], ++// .init = ezx_machine_init, /* the stereo call already registered our controls */ + .ops = &ezx_ops, +}, +{ @@ -1014,17 +1203,11 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + .num_links = ARRAY_SIZE(ezx_dai), +}; + -+/* template audio private data */ -+//static struct codec_priv_setup_data template_codec_setup = { -+// .i2c_address = 0x1b, -+//}; -+ +/* template audio subsystem */ +static struct snd_soc_device ezx_snd_devdata = { + .machine = &snd_soc_machine_ezx, + .platform = &pxa2xx_soc_platform, + .codec_dev = &soc_codec_dev_pcap2, -+// .codec_data = &ezx_pcap2_setup, +}; + +static struct platform_device *ezx_snd_device; @@ -1032,7 +1215,6 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c +static int __init ezx_init(void) +{ + int ret; -+ printk("soc: ezx_init entered\n"); + ezx_snd_device = platform_device_alloc("soc-audio", -1); + if (!ezx_snd_device) + return -ENOMEM; @@ -1043,24 +1225,32 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + + if (ret) + platform_device_put(ezx_snd_device); -+ ++ /* configure gpio for ssp3 */ + pxa_gpio_mode(GPIO83_SFRM3_MD); /* SFRM */ + pxa_gpio_mode(GPIO81_STXD3_MD); /* TXD */ -+ pxa_gpio_mode(52 | GPIO_ALT_FN_2_IN); /* SCLK */ ++ pxa_gpio_mode(GPIO52_SCLK3_MD); /* SCLK */ + pxa_gpio_mode(GPIO89_SRXD3_MD); /* RXD */ + ++ /* configure gpio for ssp2 */ ++ pxa_gpio_mode(37 | GPIO_IN); /* SFRM */ ++ pxa_gpio_mode(38 | GPIO_IN); /* TXD */ ++ pxa_gpio_mode(22 | GPIO_IN); /* SCLK */ ++ pxa_gpio_mode(88 | GPIO_IN); /* RXD */ + + pxa_gpio_mode(GPIO_HW_ATTENUATE_A780 | GPIO_OUT); + pxa_gpio_set_value(GPIO_HW_ATTENUATE_A780, 1); + -+ -+ ++ /* request jack irq */ ++ request_irq(EZX_IRQ_HEADJACK, &jack_irq, SA_INTERRUPT, "headphone jack", NULL); ++ request_irq(EZX_IRQ_MIC, &jack_irq, SA_INTERRUPT, "mic jack", NULL); + + return ret; +} + +static void __exit ezx_exit(void) +{ ++ free_irq(EZX_IRQ_HEADJACK, NULL); ++ free_irq(EZX_IRQ_MIC, NULL); + platform_device_unregister(ezx_snd_device); +} + @@ -1069,8 +1259,8 @@ Index: linux-2.6.21/sound/soc/pxa/ezx.c + Index: linux-2.6.21/sound/soc/codecs/Makefile =================================================================== ---- linux-2.6.21.orig/sound/soc/codecs/Makefile 2007-08-02 22:57:48.000000000 -0300 -+++ linux-2.6.21/sound/soc/codecs/Makefile 2007-08-02 22:58:34.000000000 -0300 +--- linux-2.6.21.orig/sound/soc/codecs/Makefile 2007-09-07 12:13:43.000000000 -0300 ++++ linux-2.6.21/sound/soc/codecs/Makefile 2007-09-07 12:13:49.000000000 -0300 @@ -2,8 +2,10 @@ snd-soc-wm8731-objs := wm8731.o snd-soc-wm8750-objs := wm8750.o @@ -1084,8 +1274,8 @@ Index: linux-2.6.21/sound/soc/codecs/Makefile +obj-$(CONFIG_SND_SOC_PCAP2) += snd-soc-pcap2.o Index: linux-2.6.21/sound/soc/codecs/Kconfig =================================================================== ---- linux-2.6.21.orig/sound/soc/codecs/Kconfig 2007-08-02 22:57:48.000000000 -0300 -+++ linux-2.6.21/sound/soc/codecs/Kconfig 2007-08-02 22:58:34.000000000 -0300 +--- linux-2.6.21.orig/sound/soc/codecs/Kconfig 2007-09-07 12:13:43.000000000 -0300 ++++ linux-2.6.21/sound/soc/codecs/Kconfig 2007-09-07 12:13:49.000000000 -0300 @@ -13,3 +13,7 @@ config SND_SOC_WM9712 tristate @@ -1096,8 +1286,8 @@ Index: linux-2.6.21/sound/soc/codecs/Kconfig + depends on SND_SOC && EZX_PCAP Index: linux-2.6.21/sound/soc/pxa/Makefile =================================================================== ---- linux-2.6.21.orig/sound/soc/pxa/Makefile 2007-08-02 22:58:17.000000000 -0300 -+++ linux-2.6.21/sound/soc/pxa/Makefile 2007-08-02 22:58:34.000000000 -0300 +--- linux-2.6.21.orig/sound/soc/pxa/Makefile 2007-09-07 12:13:43.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/Makefile 2007-09-07 12:13:49.000000000 -0300 @@ -14,9 +14,10 @@ snd-soc-poodle-objs := poodle.o snd-soc-tosa-objs := tosa.o @@ -1110,70 +1300,3 @@ Index: linux-2.6.21/sound/soc/pxa/Makefile obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o - +obj-$(CONFIG_SND_PXA2XX_SOC_EZX) += snd-soc-ezx.o -Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c -=================================================================== ---- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-ssp.c 2007-08-02 22:58:17.000000000 -0300 -+++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c 2007-08-02 22:58:34.000000000 -0300 -@@ -440,6 +440,12 @@ - case SND_SOC_DAIFMT_NB_NF: - SSPSP_P(port) |= SSPSP_SFRMP | SSPSP_FSRT; - break; -+ case SND_SOC_DAIFMT_NB_IF: -+ SSPSP_P(port) |= SSPSP_FSRT; -+ break; -+ case SND_SOC_DAIFMT_IB_NF: -+ SSPSP_P(port) |= SSPSP_SFRMP; -+ break; - case SND_SOC_DAIFMT_IB_IF: - break; - default: -Index: linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c -=================================================================== ---- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-pcm.c 2007-08-02 22:57:48.000000000 -0300 -+++ linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c 2007-08-04 22:46:02.000000000 -0300 -@@ -61,8 +61,9 @@ - - dcsr = DCSR(dma_ch); - DCSR(dma_ch) = dcsr & ~DCSR_STOPIRQEN; -- -+ printk("dma irq dcsr=%08x ", dcsr); - if (dcsr & DCSR_ENDINTR) { -+ printk("endintr\n"); - snd_pcm_period_elapsed(substream); - } else { - printk( KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n", -@@ -106,7 +107,8 @@ - return ret; - prtd->dma_ch = ret; - } -- -+ printk("requested dma channel %d\n", ret); -+ - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = totsize; - -@@ -153,11 +155,13 @@ - static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) - { - struct pxa2xx_runtime_data *prtd = substream->runtime->private_data; -- -+ printk("pcm_prepare channel %d\n", prtd->dma_ch); - DCSR(prtd->dma_ch) &= ~DCSR_RUN; - DCSR(prtd->dma_ch) = 0; - DCMD(prtd->dma_ch) = 0; -- *prtd->params->drcmr = prtd->dma_ch | DRCMR_MAPVLD; -+ -+ if (prtd->params) -+ *prtd->params->drcmr = prtd->dma_ch | DRCMR_MAPVLD; - - return 0; - } -@@ -190,7 +194,7 @@ - default: - ret = -EINVAL; - } -- -+ printk("pcm_trigger ret%d, cmd%d\n", ret, cmd); - return ret; - } - diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch index b0ccf4835e..8e8abcb738 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-28 19:44:46.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-06-28 19:44:52.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c 2007-06-29 01:07:18.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx.c 2007-08-16 15:52:21.000000000 -0300 @@ -86,8 +86,40 @@ .init = ezx_ohci_init, }; @@ -45,8 +45,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c static int __init ezx_init(void) Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-28 19:44:29.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-06-28 19:44:52.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-29 01:07:18.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-08-16 15:52:20.000000000 -0300 @@ -102,6 +102,9 @@ endchoice @@ -60,8 +60,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c 2007-06-28 19:44:52.000000000 -0300 -@@ -0,0 +1,249 @@ ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c 2007-08-16 15:52:43.000000000 -0300 +@@ -0,0 +1,262 @@ +/* + * BP handshake code for Motorola EZX phones + * @@ -109,7 +109,16 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c +{ + if (pxa_gpio_get_value(GPIO_BB_WDI2) == 0) { + DEBUGP("BP request poweroff!\n"); -+// pm_power_off(); ++ /* ++ * It is correct to power off here, the following line is ++ * commented out because e680 lowers WDI2 when BP is in ++ * flash mode, otherwise WDI2 is used to detect low ++ * battery. You can safely uncomment this line if you are ++ * using this kernel with BP in normal mode. ++ */ ++#ifndef CONFIG_PXA_EZX_E680 ++ pm_power_off(); ++#endif + } +} + @@ -185,6 +194,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c + if (!bp_handshake_passed()) { + handshake(); + if (bp_handshake_passed()) { ++ /* FIXME: (test) try to not disable irq_wdi2 and drain battery */ + disable_irq(bp->irq_wdi2); + + /* set bp_rdy handle for usb ipc */ @@ -201,7 +211,10 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c +static irqreturn_t bp_wdi2_handler(int irq, void *dev_id) +{ + DEBUGP("BP request poweroff!\n"); -+// pm_power_off(); ++ /* same case as check_power_off() */ ++#ifndef CONFIG_PXA_EZX_E680 ++ pm_power_off(); ++#endif + return IRQ_HANDLED; +} + @@ -313,8 +326,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c + Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-28 19:44:29.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-06-28 19:44:52.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-29 01:07:18.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-08-16 15:52:20.000000000 -0300 @@ -24,6 +24,7 @@ obj-$(CONFIG_PXA_EZX_E2) += ezx-e2.o obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch index a86be24b30..01ab60d9ec 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c 2007-08-01 19:45:27.000000000 -0300 -@@ -0,0 +1,215 @@ ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c 2007-09-07 15:27:23.000000000 -0300 +@@ -0,0 +1,219 @@ +/* + * EMU Driver for Motorola EZX phones + * @@ -27,6 +27,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c +static struct pxa2xx_udc_mach_info ezx_udc_info; +extern int ezx_pcap_bit_set(u_int32_t, u_int8_t); +extern int ezx_pcap_read_bit(u_int32_t); ++static int emu_irq_usb4v; ++static int emu_irq_usb1v; ++ + +#if defined CONFIG_EZX_EMU_USB +#define emu_switch_to_default() emu_switch_to_usb() @@ -38,6 +41,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + +void emu_switch_to_usb(void) +{ ++ printk(KERN_NOTICE "EMU: Switching to USB\n"); + pxa_gpio_mode(GPIO34_USB_P2_2_MD); + pxa_gpio_mode(GPIO35_USB_P2_1_MD); + pxa_gpio_mode(GPIO36_USB_P2_4_MD); @@ -45,18 +49,19 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + pxa_gpio_mode(GPIO40_USB_P2_5_MD); + pxa_gpio_mode(GPIO53_USB_P2_3_MD); + UP2OCR = 0x02000000; -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_RS232ENB, 1); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_FSENB, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_VUSB_EN, 1); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_FSENB, 0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 1); + clr_GPIO(GPIO_EMU_MUX1); + clr_GPIO(GPIO_EMU_MUX2); +} + +void emu_switch_to_uart(void) +{ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_VUSB_EN,0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_RS232ENB, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_RS232_DIR, 1); ++ printk(KERN_NOTICE "EMU: Switching to UART\n"); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN,0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232_DIR, 1); + set_GPIO(GPIO39_FFTXD); + pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); + set_GPIO(GPIO34_TXENB); @@ -73,6 +78,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + +void emu_switch_to_audio(int stereo) +{ ++ printk(KERN_NOTICE "EMU: Switching to audio(%s)\n", (stereo ? "stereo" : "mono")); + clr_GPIO(GPIO39_VPOUT); + if (stereo) { + pxa_gpio_mode(GPIO34_TXENB | GPIO_IN); @@ -96,8 +102,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + +void emu_switch_to_nothing(void) +{ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_VUSB_EN, 0); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_RS232ENB, 1); ++ printk(KERN_NOTICE "EMU: Switching to disconnected\n"); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1); + pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); + set_GPIO(GPIO34_TXENB); + pxa_gpio_mode(GPIO35_XRXD | GPIO_IN); @@ -112,11 +119,11 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c +{ + switch (irq) { + case EZX_IRQ_USB4V: -+ if(ezx_pcap_read_bit(SSP_PCAP_ADJ_BIT_PSTAT_USBDET_4V)) ++ if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V))) + emu_switch_to_default(); + break; + case EZX_IRQ_USB1V: -+ if(!ezx_pcap_read_bit(SSP_PCAP_ADJ_BIT_PSTAT_USBDET_1V)) ++ if(!ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB1V))) + emu_switch_to_nothing(); + break; + } @@ -130,12 +137,23 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + pxa_gpio_mode(GPIO_EMU_MUX1 | GPIO_OUT); + pxa_gpio_mode(GPIO_EMU_MUX2 | GPIO_OUT); + -+ request_irq(EZX_IRQ_USB4V, &emu_irq, SA_INTERRUPT, "usb 4v", NULL); -+ request_irq(EZX_IRQ_USB1V, &emu_irq, SA_INTERRUPT, "usb 1v", NULL); ++ emu_irq_usb4v = platform_get_irq(dev, 0); ++ if(emu_irq_usb4v < 0) { ++ printk(KERN_ERR "Unable to get IRQ for USB4V!\n"); ++ return emu_irq_usb4v; ++ } ++ emu_irq_usb1v = platform_get_irq(dev, 1); ++ if(emu_irq_usb1v < 0) { ++ printk(KERN_ERR "Unable to get IRQ for USB1V!\n"); ++ return emu_irq_usb1v; ++ } ++ ++ request_irq(emu_irq_usb4v, &emu_irq, SA_INTERRUPT, "usb 4v", NULL); ++ request_irq(emu_irq_usb1v, &emu_irq, SA_INTERRUPT, "usb 1v", NULL); + + pxa_set_udc_info(&ezx_udc_info); + -+ if(ezx_pcap_read_bit(SSP_PCAP_ADJ_BIT_PSTAT_USBDET_4V)) ++ if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V))) + emu_switch_to_default(); + else + emu_switch_to_nothing(); @@ -145,21 +163,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + +static int ezx_emu_remove(struct platform_device *dev) +{ -+ free_irq(EZX_IRQ_USB4V, NULL); -+ free_irq(EZX_IRQ_USB1V, NULL); -+ -+ return 0; -+} -+ -+static int ezx_emu_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ emu_switch_to_nothing(); -+ return 0; -+} ++ free_irq(emu_irq_usb4v, NULL); ++ free_irq(emu_irq_usb1v, NULL); + -+static int ezx_emu_resume(struct platform_device *dev) -+{ -+ emu_switch_to_default(); + return 0; +} + @@ -170,12 +176,12 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c + switch (cmd) { + case PXA2XX_UDC_CMD_DISCONNECT: + printk(KERN_NOTICE "USB cmd disconnect\n"); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_USB_PU,0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0); + udc_connected_status = 0; + break; + case PXA2XX_UDC_CMD_CONNECT: + printk(KERN_NOTICE "USB cmd connect\n"); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_BUSCTRL_USB_PU,1); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1); + udc_connected_status = 1; + break; + } @@ -194,8 +200,6 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c +static struct platform_driver ezxemu_driver = { + .probe = ezx_emu_probe, + .remove = ezx_emu_remove, -+ .suspend = ezx_emu_suspend, -+ .resume = ezx_emu_resume, + .driver = { + .name = "ezx-emu", + .owner = THIS_MODULE, @@ -220,8 +224,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-08-01 19:39:02.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-08-01 19:45:27.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-09-07 11:32:26.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-09-07 15:34:08.000000000 -0300 @@ -108,6 +108,28 @@ config EZX_PCAP bool "PCAP Support" @@ -253,8 +257,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig endmenu Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-08-01 19:39:02.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-08-01 19:45:27.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-09-07 11:32:26.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-09-07 15:34:08.000000000 -0300 @@ -26,6 +26,7 @@ obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o obj-$(CONFIG_EZX_BP) += ezx-bp.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch new file mode 100644 index 0000000000..f21894e904 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch @@ -0,0 +1,342 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c 2007-09-09 13:33:19.000000000 -0300 +@@ -0,0 +1,270 @@ ++/* ++ * EZX EOC Driver for Motorola EZX phones ++ * ++ * Copyright (C) 2007 Alex Zhang <celeber2@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/i2c.h> ++#include <linux/platform_device.h> ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx.h> ++ ++#include "ezx-eoc.h" ++ ++#if 1 ++#define EOC_DBG printk ++#else ++#define EOC_DBG(x, args...) ++#endif ++ ++#define EOC_REG_ADDR_SIZE 1 ++#define EOC_REG_DATA_SIZE 3 ++ ++struct ezx_eoc_platform_data *pdata; ++static int eoc_func = EOC_FUNC_USB_NET; ++static const char eoc_i2c_driver_name[] = "ezx-eoc"; ++ ++/* Addresses to scan */ ++static unsigned short normal_i2c[] = { ++ 0x17, /* Address for version 2.0 and above */ ++ // 0x7C, /* Address for versions prior too 2.0 */ ++ I2C_CLIENT_END ++}; ++ ++/* I2C Magic */ ++I2C_CLIENT_INSMOD; ++ ++static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter); ++static int ezx_eoc_detect(struct i2c_adapter *adapter, int address, int kind); ++static int ezx_eoc_detach_client(struct i2c_client *client); ++ ++static struct i2c_client *eoc_i2c_client = NULL; ++ ++static struct i2c_driver eoc_i2c_driver = { ++ .driver = { ++ .name = (char *)eoc_i2c_driver_name, ++ }, ++ .id = I2C_DRIVERID_EEPROM, ++ .attach_adapter = ezx_eoc_attach_adapter, ++ .detach_client = ezx_eoc_detach_client, ++}; ++ ++int eoc_reg_read(int reg, unsigned int *reg_value) ++{ ++ unsigned char reg_num = reg; ++ unsigned char value[EOC_REG_DATA_SIZE]; ++ int retval; ++ ++ struct i2c_msg msgs[2] = ++ { ++ { 0, 0, EOC_REG_ADDR_SIZE, ®_num }, ++ { 0, I2C_M_RD, EOC_REG_DATA_SIZE, value } ++ }; ++ ++ /* check if we have initialized */ /*not necessary --WM ++ if (eoc_i2c_client == NULL) ++ { ++ EOC_DBG("eoc_reg_read: not initialized\n"); ++ return -EINVAL; ++ } ++*/ ++ msgs[0].addr = msgs[1].addr = eoc_i2c_client->addr; ++ ++ /* transfer message to client */ ++ retval = i2c_transfer(eoc_i2c_client->adapter, msgs, 2); ++ if (retval >= 0) ++ { ++ *reg_value = (value[2] << 0); ++ *reg_value |= (value[1] << 8); ++ *reg_value |= (value[0] << 16); ++ } ++ return retval; ++} ++EXPORT_SYMBOL_GPL(eoc_reg_read); ++ ++int eoc_reg_write(int reg, unsigned int reg_value) ++{ ++ unsigned char value[EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE]; ++ int retval; ++ ++ /* check if we have initialized */ /*not necessary --WM ++ if (eoc_i2c_client == NULL) ++ { ++ EOC_DBG("eoc_reg_write: not initialized\n"); ++ return -EINVAL; ++ } ++*/ ++ /* Copy the data into a buffer into the correct format */ ++ value[0] = reg; ++ value[1] = (reg_value >> 16) & 0xFF; ++ value[2] = (reg_value >> 8) & 0xFF; ++ value[3] = (reg_value >> 0) & 0xFF; ++ ++ /* Write the data to the EOC */ ++ retval = i2c_master_send (eoc_i2c_client, value, EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE); ++ ++ return retval; ++} ++EXPORT_SYMBOL_GPL(eoc_reg_write); ++ ++static void eoc_switch_to_usb(void) ++{ ++ pxa_gpio_mode(GPIO34_USB_P2_2_MD); ++ pxa_gpio_mode(GPIO35_USB_P2_1_MD); ++ pxa_gpio_mode(GPIO36_USB_P2_4_MD); ++ pxa_gpio_mode(GPIO39_USB_P2_6_MD); ++ pxa_gpio_mode(GPIO40_USB_P2_5_MD); ++ pxa_gpio_mode(GPIO53_USB_P2_3_MD); ++ EOC_DBG("ALEX;*********************************************emu_switch_to_usb;\n"); ++} ++ ++static void eoc_switch_to_nothing(void) ++{ ++ pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); ++ set_GPIO(GPIO34_TXENB); ++ pxa_gpio_mode(GPIO35_XRXD | GPIO_IN); ++ pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO40_VPIN | GPIO_IN); ++ pxa_gpio_mode(GPIO53_VMIN | GPIO_IN); ++} ++ ++static void eoc_switch_to_default(void) ++{ ++ switch (eoc_func) { ++ case EOC_FUNC_USB_NET: ++ eoc_switch_to_usb(); ++ break; ++ case EOC_FUNC_NOTHING: ++ eoc_switch_to_nothing(); ++ break; ++ } ++} ++ ++ ++static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter) ++{ ++ return i2c_probe(adapter, &addr_data, ezx_eoc_detect); ++} ++ ++/* This function is called by i2c_probe */ ++static int ezx_eoc_detect(struct i2c_adapter *adapter, int address, int kind) ++{ ++ struct i2c_client *new_client; ++ int err = 0; ++ ++ if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) ++ return -ENOMEM; ++ ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &eoc_i2c_driver; ++ new_client->flags = 0; ++ strlcpy(new_client->name, eoc_i2c_driver_name, I2C_NAME_SIZE); ++ ++ if ((err = i2c_attach_client(new_client))) { ++ kfree(new_client); ++ return err; ++ } ++ ++ eoc_i2c_client = new_client; ++ ++ if (pdata && pdata->init) { ++ pdata->init(); ++ } ++ else ++ return -EINVAL; ++ ++ eoc_switch_to_default(); ++ ++ return 0; ++} ++ ++static int ezx_eoc_detach_client(struct i2c_client *client) ++{ ++ int err; ++ ++ err = i2c_detach_client(client); ++ if (err) ++ return err; ++ ++ return 0; ++} ++ ++static int __init ezx_eoc_probe(struct platform_device *dev) ++{ ++ int ret; ++ ++ pdata = dev->dev.platform_data; ++ ++ ret = i2c_add_driver(&eoc_i2c_driver); ++ if (ret != 0) ++ return -EINVAL; ++ ++ /* ++ * I think we should save platform_data and call init and eoc_switch ++ * from ezx_eoc_detect, after client is setup. ++ * And there is no need for all the "check if initialised" checks if ++ * you assure that you only call read/write after the client is set. ++ * Probably, this was causing the crash on i2c-core too. ++ * --WM ++ */ ++ ++ /* FIXME: should set udc_info here -WM */ ++ return 0; ++} ++ ++static int ezx_eoc_remove(struct platform_device *dev) ++{ ++ return i2c_del_driver(&eoc_i2c_driver); ++} ++ ++static int ezx_eoc_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ eoc_switch_to_nothing(); ++ return 0; ++} ++ ++static int ezx_eoc_resume(struct platform_device *dev) ++{ ++ eoc_switch_to_default(); ++ return 0; ++} ++ ++static struct platform_driver ezx_eoc_driver = { ++ .probe = ezx_eoc_probe, ++ .remove = ezx_eoc_remove, ++ .suspend = ezx_eoc_suspend, ++ .resume = ezx_eoc_resume, ++ .driver = { ++ .name = "ezx-eoc", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++int __init ezx_eoc_init(void) ++{ ++ return platform_driver_register(&ezx_eoc_driver); ++} ++ ++void ezx_eoc_exit(void) ++{ ++ return platform_driver_unregister(&ezx_eoc_driver); ++} ++ ++MODULE_AUTHOR("Alex Zhang <celeber2@gmail.com>"); ++MODULE_DESCRIPTION("EZX EOC I2C driver"); ++MODULE_LICENSE("GPL"); ++ ++/* doesnt module_init work?? -WM */ ++/*late_initcall(ezx_eoc_init);*/ ++module_init(ezx_eoc_init); ++module_exit(ezx_eoc_exit); +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.h 2007-09-07 22:15:52.000000000 -0300 +@@ -0,0 +1,33 @@ ++/* ++ * linux/arch/arm/mach-pxa/ezx-eoc.h ++ * ++ * Copyright (C) Alex Zhang <celeber2@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __EZX_EOC_H__ ++#define __EZX_EOC_H__ ++ ++enum { ++ POWER_IC_REG_EOC_INT_STATUS, ++ POWER_IC_REG_EOC_INT_MASK, ++ POWER_IC_REG_EOC_INT_SENSE, ++ POWER_IC_REG_EOC_POWER_CONTROL_0, ++ POWER_IC_REG_EOC_POWER_CONTROL_1, ++ POWER_IC_REG_EOC_CONN_CONTROL, ++ POWER_IC_REG_EOC_NUM ++}; ++ ++enum { ++ EOC_FUNC_NOTHING, ++ EOC_FUNC_USB_NET, ++}; ++ ++struct ezx_eoc_platform_data { ++ int (*init)(void); ++}; ++ ++#endif /* __EZX_EOC_H__ */ +Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-09-07 22:15:52.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-09-07 22:15:52.000000000 -0300 +@@ -108,6 +108,12 @@ + config EZX_PCAP + bool "PCAP Support" + ++config EZX_EOC ++ tristate "EOC i2c driver of Motorola EZX phones" ++ depends on I2C && EXPERIMENTAL && PXA_EZX_A1200 ++ help ++ EOC i2c driver of Motorola EZX phones ++ + config EZX_EMU + bool "Motorola Enchanced Mini Usb" + depends on EZX_PCAP +Index: linux-2.6.21/arch/arm/mach-pxa/Makefile +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-09-07 22:15:52.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-09-07 22:15:52.000000000 -0300 +@@ -27,6 +27,7 @@ + obj-$(CONFIG_EZX_BP) += ezx-bp.o + obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o + obj-$(CONFIG_EZX_EMU) += ezx-emu.o ++obj-$(CONFIG_EZX_EOC) += ezx-eoc.o + + # Support for blinky lights + led-y := leds.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch index 7ef42f0ffc..c291f1aadf 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/drivers/mtd/maps/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/mtd/maps/Kconfig 2007-04-26 00:08:32.000000000 -0300 -+++ linux-2.6.21/drivers/mtd/maps/Kconfig 2007-04-26 20:49:33.000000000 -0300 -@@ -595,6 +595,28 @@ +--- linux-2.6.21.orig/drivers/mtd/maps/Kconfig 2007-08-31 22:27:53.000000000 -0300 ++++ linux-2.6.21/drivers/mtd/maps/Kconfig 2007-08-31 23:04:18.000000000 -0300 +@@ -595,6 +595,34 @@ help This enables access to the flash chip on the Sharp SL Series of PDAs. @@ -21,9 +21,15 @@ Index: linux-2.6.21/drivers/mtd/maps/Kconfig +config MTD_EZX_A780_ALTERNATE + bool "A780/E680 Alternate Mapping for BLOB2" + ++config MTD_EZX_A1200 ++ bool "A1200 Original Mapping" ++ +config MTD_EZX_E2 + bool "E2 Original Mapping" + ++config MTD_EZX_E6 ++ bool "E6 Original Mapping" ++ +endchoice + +endif @@ -33,8 +39,8 @@ Index: linux-2.6.21/drivers/mtd/maps/Kconfig depends on MTD Index: linux-2.6.21/drivers/mtd/maps/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/mtd/maps/Makefile 2007-04-26 00:08:32.000000000 -0300 -+++ linux-2.6.21/drivers/mtd/maps/Makefile 2007-04-26 20:30:30.000000000 -0300 +--- linux-2.6.21.orig/drivers/mtd/maps/Makefile 2007-08-31 22:27:53.000000000 -0300 ++++ linux-2.6.21/drivers/mtd/maps/Makefile 2007-08-31 23:04:18.000000000 -0300 @@ -72,3 +72,4 @@ obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o @@ -43,7 +49,7 @@ Index: linux-2.6.21/drivers/mtd/maps/Makefile Index: linux-2.6.21/drivers/mtd/maps/ezx-flash.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/mtd/maps/ezx-flash.c 2007-04-26 20:30:30.000000000 -0300 ++++ linux-2.6.21/drivers/mtd/maps/ezx-flash.c 2007-08-21 17:03:43.000000000 -0300 @@ -0,0 +1,227 @@ +/* + * $Id: $ @@ -122,7 +128,7 @@ Index: linux-2.6.21/drivers/mtd/maps/ezx-flash.c + .size = 0x00020000, + .offset = 0x00020000, + } , { -+ .name = "Kernel 1", ++ .name = "Moto Kernel", + .size = 0x000e0000, // 896KB + .offset = 0x00040000, + } , { @@ -130,11 +136,11 @@ Index: linux-2.6.21/drivers/mtd/maps/ezx-flash.c + .size = 0x01760000, + .offset = 0x00120000, + } , { -+ .name = "Kernel 2", ++ .name = "OpenEZX Kernel", + .size = 0x00180000, // 1.5MB + .offset = 0x01880000, + } , { -+ .name = "VFM_Filesystem", ++ .name = "ezxlocal", + .size = 0x005a0000, + .offset = 0x01a00000, + } , { diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch index 91d33d6500..604f8eb59b 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch @@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c 2007-08-01 20:14:17.000000000 -0300 -@@ -0,0 +1,498 @@ ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c 2007-08-31 22:48:16.000000000 -0300 +@@ -0,0 +1,513 @@ +/* Driver for Motorola PCAP2 as present in EZX phones + * + * This is both a SPI device driver for PCAP itself, as well as @@ -41,6 +41,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +static struct ssp_dev ezx_ssp_dev; +static struct ssp_state ezx_ssp_state; +static struct pcap_platform_data *pcap_data; ++static int pcap_irq; + +static unsigned long ezx_ssp_pcap_putget(ulong data) +{ @@ -72,13 +73,11 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + +int ezx_pcap_write(u_int8_t reg_num, u_int32_t value) +{ -+ value &= SSP_PCAP_REGISTER_VALUE_MASK; -+ value |= SSP_PCAP_REGISTER_WRITE_OP_BIT -+ | (reg_num<<SSP_PCAP_REGISTER_ADDRESS_SHIFT); ++ value &= PCAP_REGISTER_VALUE_MASK; ++ value |= PCAP_REGISTER_WRITE_OP_BIT ++ | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT); + -+ local_irq_disable(); + ezx_ssp_pcap_putget(value); -+ local_irq_enable(); + + DEBUGP("pcap write r%x: 0x%08x\n", reg_num, value); + return 0; @@ -87,12 +86,10 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + +int ezx_pcap_read(u_int8_t reg_num, u_int32_t *value) +{ -+ u_int32_t frame = SSP_PCAP_REGISTER_READ_OP_BIT -+ | (reg_num<<SSP_PCAP_REGISTER_ADDRESS_SHIFT); ++ u_int32_t frame = PCAP_REGISTER_READ_OP_BIT ++ | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT); + -+ local_irq_disable(); + *value = ezx_ssp_pcap_putget(frame); -+ local_irq_enable(); + + DEBUGP("pcap read r%x: 0x%08x\n", reg_num, *value); + return 0; @@ -103,9 +100,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +{ + int ret; + u_int32_t tmp; -+ u_int32_t bit = (sspPcapBit & SSP_PCAP_REGISTER_VALUE_MASK); -+ u_int8_t reg_num = (sspPcapBit & SSP_PCAP_REGISTER_ADDRESS_MASK) -+ >> SSP_PCAP_REGISTER_ADDRESS_SHIFT; ++ u_int32_t bit = (sspPcapBit & PCAP_REGISTER_VALUE_MASK); ++ u_int8_t reg_num = (sspPcapBit & PCAP_REGISTER_ADDRESS_MASK) ++ >> PCAP_REGISTER_ADDRESS_SHIFT; + + ret = ezx_pcap_read(reg_num, &tmp); + if (ret < 0) @@ -124,14 +121,14 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +{ + int ret; + u_int32_t tmp; -+ u_int8_t reg_num = (bit & SSP_PCAP_REGISTER_ADDRESS_MASK) -+ >> SSP_PCAP_REGISTER_ADDRESS_SHIFT; ++ u_int8_t reg_num = (bit & PCAP_REGISTER_ADDRESS_MASK) ++ >> PCAP_REGISTER_ADDRESS_SHIFT; + + ret = ezx_pcap_read(reg_num, &tmp); + if (ret < 0) + return ret; + -+ return tmp & (bit & SSP_PCAP_REGISTER_VALUE_MASK); ++ return tmp & (bit & PCAP_REGISTER_VALUE_MASK); +} +EXPORT_SYMBOL_GPL(ezx_pcap_read_bit); + @@ -141,11 +138,13 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +static struct proc_dir_entry *proc_pcap; + +char *pcap_registers[] = { -+ "ISR\t", "MSR\t", "PSTAT\t", NULL, NULL, NULL, "VREG2\t", "VREG\t", -+ "BATT_DAC", "ADC1\t", "ADC2\t", "AUD_CODEC", "AUD_RX_AMPS", -+ "AUD_ST_DAC", NULL, NULL, NULL, NULL, NULL, NULL, "BUSCTRL\t", -+ "PERIPH\t", NULL, NULL, "LOWPWR\t", NULL, "AUD_TX_AMPS", "GP\t", -+ NULL, NULL, NULL, NULL, NULL ++ "ISR\t", "MSR\t", "PSTAT\t", "INT_SEL\t", "SWCTRL\t", "VREG1\t", ++ "VREG2\t", "VREG\t", "BATT_DAC", "ADC1\t", "ADC2\t", "AUD_CODEC", ++ "RX_AUD_AMPS", "ST_DAC\t", "RTC_TOD\t", "RTC_TODA", "RTC_DAY\t", ++ "RTC_DAYA", "MTRTMR\t", "PWRCTRL\t", "BUSCTRL\t", "PERIPH\t", ++ "AUXVREG_MASK", "VENDOR_REV", "LOWPWR_CTRL", "PERIPH_MASK", ++ "TX_AUD_AMPS", "GP\t", ++ NULL, NULL, NULL, NULL +}; + +static int pcap_read_proc(char *page, char **start, off_t off, int count, @@ -181,12 +180,12 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +{ + u_int32_t tmp; + -+ ezx_pcap_read(SSP_PCAP_ADJ_AUX_VREG_REGISTER, &tmp); ++ ezx_pcap_read(PCAP_REG_AUXVREG, &tmp); + -+ tmp &= (~SSP_PCAP_VIBRATOR_VOLTAGE_LEVEL_MASK); -+ tmp |= value; ++ tmp &= ~PCAP_AUXVREG_V_VIB_MASK; ++ tmp |= ((value << PCAP_AUXVREG_V_VIB_SHIFT) & PCAP_AUXVREG_V_VIB_MASK); + -+ ezx_pcap_write(SSP_PCAP_ADJ_AUX_VREG_REGISTER, tmp); ++ ezx_pcap_write(PCAP_REG_AUXVREG, tmp); +} +EXPORT_SYMBOL_GPL(ezx_pcap_vibrator_level); + @@ -195,16 +194,18 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +void ezx_pcap_mmcsd_voltage(u_int32_t bits) +{ + unsigned int tmp; -+ ezx_pcap_read(SSP_PCAP_ADJ_AUX_VREG_REGISTER, &tmp); ++ ezx_pcap_read(PCAP_REG_AUXVREG, &tmp); + if (pcap_data->flags & PCAP_MCI_SD) { -+ tmp &= 0xffffff9f; /* zero all vaux2 bits */ -+ tmp |= (bits & 0x3) << 5; ++ tmp &= ~PCAP_AUXVREG_VAUX2_MASK; ++ tmp |= ((bits << PCAP_AUXVREG_VAUX2_SHIFT) & ++ PCAP_AUXVREG_VAUX2_MASK); + } + else if (pcap_data->flags & PCAP_MCI_TF) { -+ tmp &= 0xfffff0ff; /* zero all vaux3 bits */ -+ tmp |= (bits & 0xf) << 8; ++ tmp &= ~PCAP_AUXVREG_VAUX3_MASK; ++ tmp |= ((bits << PCAP_AUXVREG_VAUX3_SHIFT) & ++ PCAP_AUXVREG_VAUX3_MASK); + } -+ ezx_pcap_write(SSP_PCAP_ADJ_AUX_VREG_REGISTER, tmp); ++ ezx_pcap_write(PCAP_REG_AUXVREG, tmp); +} +EXPORT_SYMBOL(ezx_pcap_mmcsd_voltage); + @@ -212,10 +213,11 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +{ + if (on > 0) on = 1; + else on = 0; ++ + if (pcap_data->flags & PCAP_MCI_SD) -+ return ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN, on); ++ return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX2_EN, on); + else if (pcap_data->flags & PCAP_MCI_TF) -+ return ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_EN, on); ++ return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX3_EN, on); + else + return -ENODEV; +} @@ -227,67 +229,85 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +static unsigned int pcap2irq[] = { + [0] = EZX_IRQ_ADCDONE, + [1] = EZX_IRQ_TS, -+ [2] = 0, /* 1HZ */ -+ [3] = 0, /* WH */ -+ [4] = 0, /* WL */ -+ [5] = 0, /* TODA */ ++ [2] = EZX_IRQ_1HZ, /* 1HZ */ ++ [3] = EZX_IRQ_WH, /* WH */ ++ [4] = EZX_IRQ_WL, /* WL */ ++ [5] = EZX_IRQ_TODA, /* TODA */ + [6] = EZX_IRQ_USB4V, -+ [7] = 0, /* ONOFF */ -+ [8] = 0, /* ONOFF2 */ ++ [7] = EZX_IRQ_ONOFF, /* ONOFF */ ++ [8] = EZX_IRQ_ONOFF2, /* ONOFF2 */ + [9] = EZX_IRQ_USB1V, -+ [10] = 0, /* MOBPORT */ ++ [10] = EZX_IRQ_MOBPORT, /* MOBPORT */ + [11] = EZX_IRQ_MIC, + [12] = EZX_IRQ_HEADJACK, -+ [13] = 0, /* ST */ -+ [14] = 0, /* PC */ -+ [15] = 0, /* WARM */ -+ [16] = 0, /* EOL */ -+ [17] = 0, /* CLK */ -+ [18] = 0, /* SYSRST */ ++ [13] = EZX_IRQ_ST, /* ST */ ++ [14] = EZX_IRQ_PC, /* PC */ ++ [15] = EZX_IRQ_WARM, /* WARM */ ++ [16] = EZX_IRQ_EOL, /* EOL */ ++ [17] = EZX_IRQ_CLK, /* CLK */ ++ [18] = EZX_IRQ_SYSRST, /* SYSRST */ + [19] = 0, + [20] = EZX_IRQ_ADCDONE2, -+ [21] = 0, /* SOFTRESET */ -+ [22] = 0, /* MNEXB */ ++ [21] = EZX_IRQ_SOFTRESET, /* SOFTRESET */ ++ [22] = EZX_IRQ_MNEXB, /* MNEXB */ +}; + +/* Array indexed by IRQ NUMBER, returns PCAP absolute value */ +static unsigned int irq2pcap[] = { -+ [EZX_IRQ_USB4V] = SSP_PCAP_ADJ_BIT_ISR_USB4VI, -+ [EZX_IRQ_USB1V] = SSP_PCAP_ADJ_BIT_ISR_USB1VI, -+ [EZX_IRQ_HEADJACK] = SSP_PCAP_ADJ_BIT_ISR_A1I, -+ [EZX_IRQ_MIC] = SSP_PCAP_ADJ_BIT_ISR_MB2I, -+ [EZX_IRQ_ADCDONE] = SSP_PCAP_ADJ_BIT_ISR_ADCDONEI, -+ [EZX_IRQ_TS] = SSP_PCAP_ADJ_BIT_ISR_TSI, -+ [EZX_IRQ_ADCDONE2] = SSP_PCAP_ADJ_BIT_ISR_ADCDONE2I, ++ [EZX_IRQ_MNEXB] = PCAP_IRQ_MNEXB, ++ [EZX_IRQ_SOFTRESET] = PCAP_IRQ_SOFTRESET, ++ [EZX_IRQ_SYSRST] = PCAP_IRQ_SYSRST, ++ [EZX_IRQ_CLK] = PCAP_IRQ_CLK, ++ [EZX_IRQ_EOL] = PCAP_IRQ_EOL, ++ [EZX_IRQ_WARM] = PCAP_IRQ_WARM, ++ [EZX_IRQ_PC] = PCAP_IRQ_PC, ++ [EZX_IRQ_ST] = PCAP_IRQ_ST, ++ [EZX_IRQ_MOBPORT] = PCAP_IRQ_MOBPORT, ++ [EZX_IRQ_ONOFF2] = PCAP_IRQ_ONOFF2, ++ [EZX_IRQ_ONOFF] = PCAP_IRQ_ONOFF, ++ [EZX_IRQ_TODA] = PCAP_IRQ_TODA, ++ [EZX_IRQ_WL] = PCAP_IRQ_WL, ++ [EZX_IRQ_WH] = PCAP_IRQ_WH, ++ [EZX_IRQ_1HZ] = PCAP_IRQ_1HZ, ++ [EZX_IRQ_USB4V] = PCAP_IRQ_USB4V, ++ [EZX_IRQ_USB1V] = PCAP_IRQ_USB1V, ++ [EZX_IRQ_HEADJACK] = PCAP_IRQ_A1, ++ [EZX_IRQ_MIC] = PCAP_IRQ_MB2, ++ [EZX_IRQ_TS] = PCAP_IRQ_TS, ++ [EZX_IRQ_ADCDONE] = PCAP_IRQ_ADCDONE, ++ [EZX_IRQ_ADCDONE2] = PCAP_IRQ_ADCDONE2, +}; + +static void pcap_ack_irq(unsigned int irq) +{ + DEBUGP("pcap_ack_irq: %u\n", irq); -+ ezx_pcap_write(SSP_PCAP_ADJ_ISR_REGISTER, irq2pcap[irq]); ++ ezx_pcap_write(PCAP_REG_ISR, irq2pcap[irq]); +} + +static void pcap_mask_irq(unsigned int irq) +{ + u_int32_t reg; ++ unsigned long flag; + ++ spin_lock_irqsave(&ezx_ssp_lock, flag); + DEBUGP("pcap_mask_irq: %u\n", irq); -+ -+ /* this needs to be atomic... but we're not on SMP so it is */ -+ ezx_pcap_read(SSP_PCAP_ADJ_MSR_REGISTER, ®); ++ ezx_pcap_read(PCAP_REG_MSR, ®); + reg |= irq2pcap[irq]; -+ ezx_pcap_write(SSP_PCAP_ADJ_MSR_REGISTER, reg); ++ ezx_pcap_write(PCAP_REG_MSR, reg); ++ spin_unlock_irqrestore(&ezx_ssp_lock, flag); +} + +static void pcap_unmask_irq(unsigned int irq) +{ + u_int32_t tmp; -+ DEBUGP("pcap_unmask_irq: %u\n", irq); ++ unsigned long flag; + -+ /* this needs to be atomic... but we're not on SMP so it is */ -+ ezx_pcap_read(SSP_PCAP_ADJ_MSR_REGISTER, &tmp); ++ spin_lock_irqsave(&ezx_ssp_lock, flag); ++ DEBUGP("pcap_unmask_irq: %u\n", irq); ++ ezx_pcap_read(PCAP_REG_MSR, &tmp); + tmp &= ~irq2pcap[irq]; -+ ezx_pcap_write(SSP_PCAP_ADJ_MSR_REGISTER, tmp); ++ ezx_pcap_write(PCAP_REG_MSR, tmp); ++ spin_unlock_irqrestore(&ezx_ssp_lock, flag); +} + +static struct irq_chip pcap_chip = { @@ -299,66 +319,49 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c +/* handler for interrupt received from PCAP via GPIO */ +static void pcap_irq_demux_handler(unsigned int irq, struct irq_desc *desc) +{ ++ const unsigned int cpu = smp_processor_id(); + int i; -+ const unsigned int cpu = smp_processor_id(); -+ u_int32_t reg, mask; ++ u_int32_t isr, msr; + + spin_lock(&desc->lock); -+ -+ DEBUGP("pcap_irq_demux_handler(%u,,) entered\n", irq); -+ -+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); -+ -+ if (unlikely(desc->status & IRQ_INPROGRESS)) { -+ DEBUGP("irq busy, masking it off\n"); -+ desc->status |= (IRQ_PENDING | IRQ_MASKED); ++ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); ++ if (unlikely(desc->status & (IRQ_INPROGRESS | IRQ_DISABLED))) { ++ desc->status |= (IRQ_PENDING | IRQ_MASKED); + desc->chip->mask(irq); + desc->chip->ack(irq); + goto out_unlock; + } -+ -+ kstat_cpu(cpu).irqs[irq]++; ++ kstat_cpu(cpu).irqs[irq]++; + desc->chip->ack(irq); + desc->status |= IRQ_INPROGRESS; -+ -+ do { -+ if (unlikely((desc->status & -+ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) == -+ (IRQ_PENDING | IRQ_MASKED))) { -+ DEBUGP("dealing with pending IRQ, unmasking\n"); -+ desc->chip->unmask(irq); ++ do { ++ if (unlikely((desc->status & ++ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) == ++ (IRQ_PENDING | IRQ_MASKED))) { ++ desc->chip->unmask(irq); + desc->status &= ~IRQ_MASKED; -+ } -+ ++ } + desc->status &= ~IRQ_PENDING; + -+ ezx_pcap_read(SSP_PCAP_ADJ_ISR_REGISTER, ®); -+ ezx_pcap_read(SSP_PCAP_ADJ_MSR_REGISTER, &mask); -+ DEBUGP("pcap_irq_demux_handler: ISR=0x%08x MSR=0x%08x\n", reg, mask); -+ -+ for (i = ARRAY_SIZE(pcap2irq)-1; i >= 0; i--) { -+ unsigned int pirq = pcap2irq[i]; -+ if (pirq == 0) -+ continue; -+ -+ if ((reg & (1 << i)) && !(mask & (1 << i))) { -+ struct irq_desc *subdesc; -+ DEBUGP("found irq %u\n", pirq); -+ subdesc = irq_desc + pirq; -+ -+ kstat_cpu(cpu).irqs[pirq]++; -+ subdesc->chip->ack(pirq); -+ -+ spin_unlock(&desc->lock); -+ handle_IRQ_event(pirq, subdesc->action); -+ spin_lock(&desc->lock); -+ } -+ } -+ -+ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING); ++ ezx_pcap_read(PCAP_REG_ISR, &isr); ++ ezx_pcap_read(PCAP_REG_MSR, &msr); ++ for (i = ARRAY_SIZE(pcap2irq)-1; i >= 0; i--) { ++ unsigned int pirq = pcap2irq[i]; ++ struct irq_desc *subdesc; ++ if (pirq == 0 || !(isr & irq2pcap[pirq])) ++ continue; ++ subdesc = irq_desc + pirq; ++ if (msr & irq2pcap[pirq]) ++ continue; ++ DEBUGP("found irq %u\n", pirq); ++ spin_unlock(&desc->lock); ++ desc_handle_irq(pirq, subdesc); ++ spin_lock(&desc->lock); ++ } + -+ desc->status &= ~IRQ_INPROGRESS; ++ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING); + ++ desc->status &= ~IRQ_INPROGRESS; +out_unlock: + spin_unlock(&desc->lock); +} @@ -368,9 +371,9 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + int irq; + DEBUGP("exz_pcap_remove entered\n"); + -+ set_irq_chained_handler(IRQ_GPIO1, NULL); ++ set_irq_chained_handler(pcap_irq, NULL); + -+ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(6); irq++) { ++ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) { + set_irq_chip(irq, NULL); + set_irq_handler(irq, NULL); + set_irq_flags(irq, 0); @@ -401,6 +404,11 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + pxa_gpio_mode(pcap_data->cs | GPIO_OUT + | GPIO_DFLT_HIGH); + } ++ pcap_irq = platform_get_irq(pdev, 0); ++ if(pcap_irq < 0) { ++ printk(KERN_ERR "Unable to get IRQ for pcap!\n"); ++ return pcap_irq; ++ } + + ret = ssp_init(&ezx_ssp_dev, pcap_data->port, 0); + if (ret) { @@ -416,20 +424,21 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + ssp_enable(&ezx_ssp_dev); + + /* mask/ack all PCAP interrupts */ -+ ezx_pcap_write(SSP_PCAP_ADJ_MSR_REGISTER, PCAP_MASK_ALL_INTERRUPT); -+ ezx_pcap_write(SSP_PCAP_ADJ_ISR_REGISTER, PCAP_CLEAR_INTERRUPT_REGISTER); ++ ezx_pcap_write(PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT); ++ ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER); + + if (pcap_data->init) + pcap_data->init(); + + /* set up interrupt demultiplexing code for PCAP2 irqs */ -+ set_irq_type(IRQ_GPIO1, IRQT_RISING); -+ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(6); irq++) { ++ set_irq_type(pcap_irq, IRQT_RISING); ++ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) { + set_irq_chip(irq, &pcap_chip); -+ set_irq_handler(irq, handle_edge_irq); ++ set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } -+ set_irq_chained_handler(IRQ_GPIO1, pcap_irq_demux_handler); ++ set_irq_chained_handler(pcap_irq, pcap_irq_demux_handler); ++ set_irq_wake(pcap_irq, 1); + + printk("ezx-pcap: ssp driver registered\n"); + return ret; @@ -440,6 +449,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + DEBUGP("pcap suspend!\n"); + ssp_flush(&ezx_ssp_dev); + ssp_save_state(&ezx_ssp_dev, &ezx_ssp_state); ++ if (pcap_data->cs >= 0) ++ pxa_gpio_mode(pcap_data->cs | GPIO_IN); + return 0; +} + @@ -448,16 +459,20 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c + DEBUGP("pcap resume!\n"); + + if (pcap_data->cs >= 0) { -+ if (pcap_data->flags & PCAP_CS_AH) ++ if (pcap_data->flags & PCAP_CS_AH) { ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT); + GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); -+ else ++ } ++ else { ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT | GPIO_DFLT_HIGH); + GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } + } + ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state); + ssp_enable(&ezx_ssp_dev); + -+ /* ack all irqs */ -+ ezx_pcap_write(SSP_PCAP_ADJ_ISR_REGISTER, PCAP_CLEAR_INTERRUPT_REGISTER); ++ ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER); ++ + return 0; +} + @@ -504,690 +519,268 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h 2007-06-29 01:07:18.000000000 -0300 -@@ -0,0 +1,678 @@ -+struct pcap_platform_data { -+ int port; -+ int cs; -+ int clk; -+ int flags; -+ int (*init)(void); -+}; -+ -+#define PCAP_CS_AH 0x1 -+#define PCAP_MCI_SD 0x2 -+#define PCAP_MCI_TF 0x4 -+ -+ -+/* (c) Copyright Motorola Beijing 2002 all rights reserved. -+ -+ Project Name : EZX -+ Project No. : -+ Title : -+ File Name : -+ Description : -+ -+ ************** REVISION HISTORY ********************************************** -+ Date Author Reference -+ ======== ========== ========================== -+ 2002-07-01 weiqiang lin create -+*/ -+#ifndef SSP_PCAP_H -+#define SSP_PCAP_H -+ -+#define SSP_vibrate_start_command() SSP_PCAP_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN); \ -+ SSP_PCAP_bit_set(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN) -+ -+#define SSP_vibrate_stop_command() SSP_PCAP_bit_clean(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN); \ -+ SSP_PCAP_bit_clean(SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN) -+ -+#define SSP_PCAP_REGISTER_VALUE_LENGTH 16 -+ -+#define SSP_PCAP_REGISTER_WRITE_OP_BIT 0x80000000 -+#define SSP_PCAP_REGISTER_READ_OP_BIT 0x00000000 -+ -+#define SSP_PCAP_REGISTER_VALUE_UP_WORD_MASK 0xffff0000 -+#define SSP_PCAP_REGISTER_VALUE_DOWN_WORD_MASK 0x0000ffff -+ -+#define SSP_PCAP_REGISTER_VALUE_MASK 0x01ffffff -+#define SSP_PCAP_REGISTER_VALUE_MASK 0x01ffffff -+#define SSP_PCAP_REGISTER_ADDRESS_MASK 0x7c000000 -+#define SSP_PCAP_REGISTER_ADDRESS_SHIFT 26 -+#define SSP_PCAP_REGISTER_NUMBER 32 -+ -+#define SSP_PCAP_ADC_START_VALUE_SET_MASK 0xfffffc00 -+#define SSP_PCAP_ADC_START_VALUE 0x000001dd -+ -+ -+#define SSP_PCAP_PHONE_CDC_CLOCK_MASK 0x000001c0 -+#define SSP_PCAP_STEREO_SAMPLE_RATE_MASK 0x00000f00 -+#define SSP_PCAP_STEREO_BCLK_TIME_SLOT_MASK 0x00018000 -+#define SSP_PCAP_STEREO_CLOCK_MASK 0x0000001c -+#define SSP_PCAP_DIGITAL_AUDIO_MODE_MASK 0x00006000 -+#define SSP_PCAP_TOUCH_PANEL_POSITION_DETECT_MODE_MASK 0x000e0000 -+#define SSP_PCAP_MONO_PGA_MASK 0x00180000 -+ -+#define SSP_PCAP_VIBRATOR_VOLTAGE_LEVEL_MASK 0x00300000 -+ -+#define SSP_PCAP_AUDIO_IN_GAIN_MASK 0x0000001f -+#define SSP_PCAP_AUDIO_IN_GAIN_SHIFT 0 -+#define SSP_PCAP_AUDIO_OUT_GAIN_MASK 0x0001e000 -+#define SSP_PCAP_AUDIO_OUT_GAIN_SHIFT 13 -+ -+ -+#define SSP_PCAP_ADD1_VALUE_MASK 0x000003ff -+#define SSP_PCAP_ADD1_VALUE_SHIFT 0 -+#define SSP_PCAP_ADD2_VALUE_MASK 0x000ffc00 -+#define SSP_PCAP_ADD2_VALUE_SHIFT 10 -+ -+ -+#define PCAP_AUDIO_IN_GAIN_MAX_VALUE 31 -+#define PCAP_AUDIO_OUT_GAIN_MAX_VALUE 15 -+ -+#define PCAP_CLEAR_INTERRUPT_REGISTER 0x00141fdf -+#define PCAP_MASK_ALL_INTERRUPT 0x0013ffff -+ -+#define SSP_PCAP_TS_KEEPER_TIMER 100 /* 1 second */ -+#define START_ADC_DELAY_TIMER 1991 /* 540 us */ ++++ linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h 2007-09-04 23:34:19.000000000 -0300 +@@ -0,0 +1,247 @@ ++/* ++ * Copyright 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ */ + -+#define SSP_SEND_PM_ALART_INTERVAL 1000 *HZ/1000 /* 1 second */ -+#define SSP_SEND_MSG_USB_ACCESSORY_INFO_DEBOUNCE 200 *HZ/1000 /* 200ms */ ++#ifndef EZX_PCAP_H ++#define EZX_PCAP_H + -+struct ssp_interrupt_info -+{ -+ u32 type; -+ u32 status; -+ void* privdata; ++struct pcap_platform_data { ++ int port; /* SSP port */ ++ int cs; /* CS gpio */ ++ int clk; ++ int flags; /* driver flags */ ++ int (*init)(void); /* board specific driver init */ +}; + -+#ifndef U8 -+#define U8 unsigned char -+#endif -+ -+#ifndef U32 -+#define U32 unsigned long -+#endif -+ -+#ifndef U16 -+#define U16 unsigned short -+#endif -+ -+#ifndef P_U16 -+#define P_U16 U16* -+#endif -+ -+#ifndef P_U32 -+#define P_U32 U32* -+#endif -+ -+#define SSP_SELECT_BUFFER (volatile unsigned long *)(0xf4000000) -+ -+#define SSP_SR_RNE 0x00000008 -+#define SSP_PCAP_BASE 0x00001000 -+/************************ STRUCTURES, ENUMS, AND TYPEDEFS **************************/ -+typedef enum accessoryStatus -+{ -+ ACCESSORY_DEVICE_STATUS_DETACHED = 0, -+ ACCESSORY_DEVICE_STATUS_ATTACHED , -+ ACCESSORY_DEVICE_STATUS_UNKNOW =0x000000ff -+}ACCESSORY_DEVICE_STATUS; -+ -+typedef enum accessoryType -+{ -+ ACCESSORY_DEVICE_NONE = 0, -+ ACCESSORY_DEVICE_SERIAL_PORT , -+ ACCESSORY_DEVICE_USB_PORT , -+ ACCESSORY_DEVICE_UNKNOW =0x000000ff -+}ACCESSORY_TYPE; -+ -+typedef enum pcapReturnStatus -+{ -+ SSP_PCAP_SUCCESS = 0, -+ SSP_PCAP_ERROR_REGISTER = SSP_PCAP_BASE+1, -+ SSP_PCAP_ERROR_VALUE = SSP_PCAP_BASE+2, -+ -+ SSP_PCAP_NOT_RUN = SSP_PCAP_BASE+0xff -+}SSP_PCAP_STATUS; -+ -+typedef enum pcapPortType -+{ -+ SSP_PCAP_SERIAL_PORT = 0x00000000, -+ SSP_PCAP_LOW_USB_PORT = 0x00000001, -+ SSP_PCAP_HIGH_USB_PORT = 0x00000002, -+ SSP_PCAP_UNKNOW_PORT = 0x000000ff -+}SSP_PCAP_PORT_TYPE; -+ -+typedef enum pcapInitDriverType -+{ -+ SSP_PCAP_TS_OPEN = 0x00000000, -+ SSP_PCAP_AUDIO_OPEN = 0x00000001, -+ SSP_PCAP_UNKNOW_DRIVER_OPEN = 0x000000ff -+}SSP_PCAP_INIT_DRIVER_TYPE; -+ -+ -+typedef enum pcapReturnBitStatus -+{ -+ SSP_PCAP_BIT_ZERO = 0x00000000, -+ SSP_PCAP_BIT_ONE = 0x00000001, -+ SSP_PCAP_BIT_ERROR = 0xff000000 -+}SSP_PCAP_BIT_STATUS; -+ -+typedef enum pcapCDCClkType -+{ -+ PCAP_CDC_CLK_IN_13M0 = 0x00000000, -+ PCAP_CDC_CLK_IN_15M36 = 0x00000040, -+ PCAP_CDC_CLK_IN_16M8 = 0x00000080, -+ PCAP_CDC_CLK_IN_19M44 = 0x000000c0, -+ PCAP_CDC_CLK_IN_26M0 = 0x00000100 -+}PHONE_CDC_CLOCK_TYPE; -+ -+typedef enum pcapST_SR -+{ -+ PCAP_ST_SAMPLE_RATE_8K = 0x00000000, -+ PCAP_ST_SAMPLE_RATE_11K = 0x00000100, -+ PCAP_ST_SAMPLE_RATE_12K = 0x00000200, -+ PCAP_ST_SAMPLE_RATE_16K = 0x00000300, -+ PCAP_ST_SAMPLE_RATE_22K = 0x00000400, -+ PCAP_ST_SAMPLE_RATE_24K = 0x00000500, -+ PCAP_ST_SAMPLE_RATE_32K = 0x00000600, -+ PCAP_ST_SAMPLE_RATE_44K = 0x00000700, -+ PCAP_ST_SAMPLE_RATE_48K = 0x00000800 -+}ST_SAMPLE_RATE_TYPE; -+ -+typedef enum pcapST_BCLK -+{ -+ PCAP_ST_BCLK_SLOT_16 = 0x00000000, -+ PCAP_ST_BCLK_SLOT_8 = 0x00008000, -+ PCAP_ST_BCLK_SLOT_4 = 0x00010000, -+ PCAP_ST_BCLK_SLOT_2 = 0x00018000, -+}ST_BCLK_TIME_SLOT_TYPE; -+ -+typedef enum pcapST_CLK -+{ -+ PCAP_ST_CLK_PLL_CLK_IN_13M0 = 0x00000000, -+ PCAP_ST_CLK_PLL_CLK_IN_15M36 = 0x00000004, -+ PCAP_ST_CLK_PLL_CLK_IN_16M8 = 0x00000008, -+ PCAP_ST_CLK_PLL_CLK_IN_19M44 = 0x0000000c, -+ PCAP_ST_CLK_PLL_CLK_IN_26M0 = 0x00000010, -+ PCAP_ST_CLK_PLL_CLK_IN_EXT_MCLK = 0x00000014, -+ PCAP_ST_CLK_PLL_CLK_IN_FSYNC = 0x00000018, -+ PCAP_ST_CLK_PLL_CLK_IN_BITCLK = 0x0000001c -+}ST_CLK_TYPE; -+ -+typedef enum pcapDigitalAudioInterfaceMode -+{ -+ PCAP_DIGITAL_AUDIO_INTERFACE_NORMAL = 0x00000000, -+ PCAP_DIGITAL_AUDIO_INTERFACE_NETWORK = 0x00002000, -+ PCAP_DIGITAL_AUDIO_INTERFACE_I2S = 0x00004000 -+}DIG_AUD_MODE_TYPE; -+ -+typedef enum pcapMono -+{ -+ PCAP_MONO_PGA_R_L_STEREO = 0x00000000, -+ PCAP_MONO_PGA_RL = 0x00080000, -+ PCAP_MONO_PGA_RL_3DB = 0x00100000, -+ PCAP_MONO_PGA_RL_6DB = 0x00180000 -+}MONO_TYPE; -+ -+typedef enum pcapVibratorVoltageLevel -+{ -+ PCAP_VIBRATOR_VOLTAGE_LEVEL0 = 0x00000000, -+ PCAP_VIBRATOR_VOLTAGE_LEVEL1 = 0x00100000, -+ PCAP_VIBRATOR_VOLTAGE_LEVEL2 = 0x00200000, -+ PCAP_VIBRATOR_VOLTAGE_LEVEL3 = 0x00300000 -+}VibratorVoltageLevel_TYPE; -+ -+typedef enum pcapTouchScreenMode -+{ -+ PCAP_TS_POSITION_X_MEASUREMENT = 0x00000000, -+ PCAP_TS_POSITION_XY_MEASUREMENT = 0x00020000, -+ PCAP_TS_PRESSURE_MEASUREMENT = 0x00040000, -+ PCAP_TS_PLATE_X_MEASUREMENT = 0x00060000, -+ PCAP_TS_PLATE_Y_MEASUREMENT = 0x00080000, -+ PCAP_TS_STANDBY_MODE = 0x000a0000, -+ PCAP_TS_NONTS_MODE = 0x000c0000 -+}TOUCH_SCREEN_DETECT_TYPE; -+ -+typedef enum pcapADJRegister -+{ -+ SSP_PCAP_ADJ_ISR_REGISTER = 0x00, -+ SSP_PCAP_ADJ_MSR_REGISTER = 0x01, -+ SSP_PCAP_ADJ_PSTAT_REGISTER = 0x02, -+ SSP_PCAP_ADJ_VREG2_REGISTER = 0x06, -+ SSP_PCAP_ADJ_AUX_VREG_REGISTER = 0x07, -+ SSP_PCAP_ADJ_BATT_DAC_REGISTER = 0x08, -+ SSP_PCAP_ADJ_ADC1_REGISTER = 0x09, -+ SSP_PCAP_ADJ_ADC2_REGISTER = 0x0a, -+ SSP_PCAP_ADJ_AUD_CODEC_REGISTER = 0x0b, -+ SSP_PCAP_ADJ_AUD_RX_AMPS_REGISTER = 0x0c, -+ SSP_PCAP_ADJ_ST_DAC_REGISTER = 0x0d, -+ SSP_PCAP_ADJ_BUSCTRL_REGISTER = 0x14, -+ SSP_PCAP_ADJ_PERIPH_REGISTER = 0x15, -+ SSP_PCAP_ADJ_LOWPWR_CTRL_REGISTER = 0x18, -+ SSP_PCAP_ADJ_TX_AUD_AMPS_REGISTER = 0x1a, -+ SSP_PCAP_ADJ_GP_REG_REGISTER = 0x1b -+}SSP_PCAP_SECONDARY_PROCESSOR_REGISTER; -+ -+typedef enum pcapADJBit_SetType -+{ -+ SSP_PCAP_ADJ_BIT_ISR_ADCDONEI = 0x00000001, -+ SSP_PCAP_ADJ_BIT_ISR_TSI = 0x00000002, -+ SSP_PCAP_ADJ_BIT_ISR_1HZI = 0x00000004, -+ SSP_PCAP_ADJ_BIT_ISR_WHI = 0x00000008, -+ SSP_PCAP_ADJ_BIT_ISR_WLI = 0x00000010, -+ SSP_PCAP_ADJ_BIT_ISR_TODAI = 0x00000020, -+ SSP_PCAP_ADJ_BIT_ISR_USB4VI = 0x00000040, -+ SSP_PCAP_ADJ_BIT_ISR_ONOFFI = 0x00000080, -+ SSP_PCAP_ADJ_BIT_ISR_ONOFF2I = 0x00000100, -+ SSP_PCAP_ADJ_BIT_ISR_USB1VI = 0x00000200, -+ SSP_PCAP_ADJ_BIT_ISR_MOBPORTI = 0x00000400, -+ SSP_PCAP_ADJ_BIT_ISR_MB2I = 0x00000800, -+ SSP_PCAP_ADJ_BIT_ISR_A1I = 0x00001000, -+ SSP_PCAP_ADJ_BIT_ISR_STI = 0x00002000, -+ SSP_PCAP_ADJ_BIT_ISR_PCI = 0x00004000, -+ SSP_PCAP_ADJ_BIT_ISR_WARMI = 0x00008000, -+ SSP_PCAP_ADJ_BIT_ISR_EOLI = 0x00010000, -+ SSP_PCAP_ADJ_BIT_ISR_CLKI = 0x00020000, -+ SSP_PCAP_ADJ_BIT_ISR_SYS_RSTI = 0x00040000, -+ SSP_PCAP_ADJ_BIT_ISR_ADCDONE2I = 0x00100000, -+ SSP_PCAP_ADJ_BIT_ISR_SOFT_RESETI = 0x00200000, -+ SSP_PCAP_ADJ_BIT_ISR_MNEXBI = 0x00400000, -+ -+ SSP_PCAP_ADJ_BIT_MSR_ADCDONEM = 0x04000001, -+ SSP_PCAP_ADJ_BIT_MSR_TSM = 0x04000002, -+ SSP_PCAP_ADJ_BIT_MSR_1HZM = 0x04000004, -+ SSP_PCAP_ADJ_BIT_MSR_WHM = 0x04000008, -+ SSP_PCAP_ADJ_BIT_MSR_WLM = 0x04000010, -+ SSP_PCAP_ADJ_BIT_MSR_TODAM = 0x04000020, -+ SSP_PCAP_ADJ_BIT_MSR_USB4VM = 0x04000040, -+ SSP_PCAP_ADJ_BIT_MSR_ONOFFM = 0x04000080, -+ SSP_PCAP_ADJ_BIT_MSR_ONOFF2M = 0x04000100, -+ SSP_PCAP_ADJ_BIT_MSR_USB1VM = 0x04000200, -+ SSP_PCAP_ADJ_BIT_MSR_MOBPORTM = 0x04000400, -+ SSP_PCAP_ADJ_BIT_MSR_MB2M = 0x04000800, -+ SSP_PCAP_ADJ_BIT_MSR_A1M = 0x04001000, -+ SSP_PCAP_ADJ_BIT_MSR_STM = 0x04002000, -+ SSP_PCAP_ADJ_BIT_MSR_PCM = 0x04004000, -+ SSP_PCAP_ADJ_BIT_MSR_WARMM = 0x04008000, -+ SSP_PCAP_ADJ_BIT_MSR_EOLM = 0x04010000, -+ SSP_PCAP_ADJ_BIT_MSR_CLKM = 0x04020000, -+ SSP_PCAP_ADJ_BIT_MSR_SYS_RSTM = 0x04040000, -+ SSP_PCAP_ADJ_BIT_MSR_ADCDONE2M = 0x04100000, -+ SSP_PCAP_ADJ_BIT_MSR_SOFT_RESETM = 0x04200000, -+ SSP_PCAP_ADJ_BIT_MSR_MNEXBM = 0x04400000, -+ -+ SSP_PCAP_ADJ_BIT_PSTAT_USBDET_4V = 0x08000040, -+ SSP_PCAP_ADJ_BIT_PSTAT_ONOFFSNS = 0x08000080, -+ SSP_PCAP_ADJ_BIT_PSTAT_ONOFFSNS2 = 0x08000100, -+ SSP_PCAP_ADJ_BIT_PSTAT_USBDET_1V = 0x08000200, -+ SSP_PCAP_ADJ_BIT_PSTAT_MOBSENSB = 0x08000400, -+ SSP_PCAP_ADJ_BIT_PSTAT_MB2SNS = 0x08000800, -+ SSP_PCAP_ADJ_BIT_PSTAT_A1SNS = 0x08001000, -+ SSP_PCAP_ADJ_BIT_PSTAT_MSTB = 0x08002000, -+ SSP_PCAP_ADJ_BIT_PSTAT_EOL_STAT = 0x08010000, -+ SSP_PCAP_ADJ_BIT_PSTAT_CLK_STAT = 0x08020000, -+ SSP_PCAP_ADJ_BIT_PSTAT_SYS_RST = 0x08040000, -+ SSP_PCAP_ADJ_BIT_PSTAT_BATTFBSNS = 0x08080000, -+ SSP_PCAP_ADJ_BIT_PSTAT_BATT_DET_IN_SNS = 0x08200000, -+ SSP_PCAP_ADJ_BIT_PSTAT_MNEXBSNS = 0x08400000, -+ SSP_PCAP_ADJ_BIT_PSTAT_WARM_SYS_RST = 0x08800000, -+ -+ SSP_PCAP_ADJ_BIT_VREG2_V1_STBY = 0x18000001, -+ SSP_PCAP_ADJ_BIT_VREG2_V2_STBY = 0x18000002, -+ SSP_PCAP_ADJ_BIT_VREG2_V3_STBY = 0x18000004, -+ SSP_PCAP_ADJ_BIT_VREG2_V4_STBY = 0x18000008, -+ SSP_PCAP_ADJ_BIT_VREG2_V5_STBY = 0x18000010, -+ SSP_PCAP_ADJ_BIT_VREG2_V6_STBY = 0x18000020, -+ SSP_PCAP_ADJ_BIT_VREG2_V7_STBY = 0x18000040, -+ SSP_PCAP_ADJ_BIT_VREG2_V8_STBY = 0x18000080, -+ SSP_PCAP_ADJ_BIT_VREG2_V9_STBY = 0x18000100, -+ SSP_PCAP_ADJ_BIT_VREG2_V10_STBY = 0x18000200, -+ SSP_PCAP_ADJ_BIT_VREG2_V1_LOWPWR = 0x18000400, -+ SSP_PCAP_ADJ_BIT_VREG2_V2_LOWPWR = 0x18000800, -+ SSP_PCAP_ADJ_BIT_VREG2_V3_LOWPWR = 0x18001000, -+ SSP_PCAP_ADJ_BIT_VREG2_V4_LOWPWR = 0x18002000, -+ SSP_PCAP_ADJ_BIT_VREG2_V5_LOWPWR = 0x18004000, -+ SSP_PCAP_ADJ_BIT_VREG2_V6_LOWPWR = 0x18008000, -+ SSP_PCAP_ADJ_BIT_VREG2_V7_LOWPWR = 0x18010000, -+ SSP_PCAP_ADJ_BIT_VREG2_V8_LOWPWR = 0x18020000, -+ SSP_PCAP_ADJ_BIT_VREG2_V9_LOWPWR = 0x18040000, -+ SSP_PCAP_ADJ_BIT_VREG2_V10_LOWPWR = 0x18080000, -+ -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX1_EN = 0x1c000002, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX1_0 = 0x1c000004, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX1_1 = 0x1c000008, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_EN = 0x1c000010, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_0 = 0x1c000020, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX2_1 = 0x1c000040, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_EN = 0x1c000080, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_0 = 0x1c000100, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_1 = 0x1c000200, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_2 = 0x1c000400, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX3_3 = 0x1c000800, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX4_EN = 0x1c001000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX4_0 = 0x1c002000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX4_1 = 0x1c004000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VSIM2_EN = 0x1c010000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VSIM_EN = 0x1c020000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VSIM_0 = 0x1c040000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_EN = 0x1c080000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_0 = 0x1c100000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_V_VIB_1 = 0x1c200000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX1_STBY = 0x1c400000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_VAUX1_LOWPWR = 0x1c800000, -+ SSP_PCAP_ADJ_BIT_AUX_VREG_SW3_STBY = 0x1d000000, -+ -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC0 = 0x20000001, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC1 = 0x20000002, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC2 = 0x20000004, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC3 = 0x20000008, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC4 = 0x20000010, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC5 = 0x20000020, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC6 = 0x20000040, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_DAC7 = 0x20000080, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_B_FDBK = 0x20000100, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_EXT_ISENSE = 0x20000200, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_V_COIN0 = 0x20000400, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_V_COIN1 = 0x20000800, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_V_COIN2 = 0x20001000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_V_COIN3 = 0x20002000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_I_COIN = 0x20004000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_COIN_CH_EN = 0x20008000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_EOL_SEL0 = 0x20020000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_EOL_SEL1 = 0x20040000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_EOL_SEL2 = 0x20080000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_EOL_CMP_EN = 0x20100000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_BATT_DET_EN = 0x20200000, -+ SSP_PCAP_ADJ_BIT_BATT_DAC_THERMBIAS_CTRL = 0x20400000, -+ -+ SSP_PCAP_ADJ_BIT_ADC1_ADEN = 0x24000001, -+ SSP_PCAP_ADJ_BIT_ADC1_RAND = 0x24000002, -+ SSP_PCAP_ADJ_BIT_ADC1_AD_SEL1 = 0x24000004, -+ SSP_PCAP_ADJ_BIT_ADC1_AD_SEL2 = 0x24000008, -+ SSP_PCAP_ADJ_BIT_ADC1_ADA10 = 0x24000010, -+ SSP_PCAP_ADJ_BIT_ADC1_ADA11 = 0x24000020, -+ SSP_PCAP_ADJ_BIT_ADC1_ADA12 = 0x24000040, -+ SSP_PCAP_ADJ_BIT_ADC1_ADA20 = 0x24000080, -+ SSP_PCAP_ADJ_BIT_ADC1_ADA21 = 0x24000100, -+ SSP_PCAP_ADJ_BIT_ADC1_ADA22 = 0x24000200, -+ SSP_PCAP_ADJ_BIT_ADC1_ATO0 = 0x24000400, -+ SSP_PCAP_ADJ_BIT_ADC1_ATO1 = 0x24000800, -+ SSP_PCAP_ADJ_BIT_ADC1_ATO2 = 0x24001000, -+ SSP_PCAP_ADJ_BIT_ADC1_ATO3 = 0x24002000, -+ SSP_PCAP_ADJ_BIT_ADC1_ATOX = 0x24004000, -+ SSP_PCAP_ADJ_BIT_ADC1_MTR1 = 0x24008000, -+ SSP_PCAP_ADJ_BIT_ADC1_MTR2 = 0x24010000, -+ SSP_PCAP_ADJ_BIT_ADC1_TS_M0 = 0x24020000, -+ SSP_PCAP_ADJ_BIT_ADC1_TS_M1 = 0x24040000, -+ SSP_PCAP_ADJ_BIT_ADC1_TS_M2 = 0x24080000, -+ SSP_PCAP_ADJ_BIT_ADC1_TS_REF_LOWPWR = 0x24100000, -+ SSP_PCAP_ADJ_BIT_ADC1_TS_REFENB = 0x24200000, -+ SSP_PCAP_ADJ_BIT_ADC1_BATT_I_POLARITY = 0x24400000, -+ SSP_PCAP_ADJ_BIT_ADC1_BATT_I_ADC = 0x24800000, -+ -+ SSP_PCAP_ADJ_BIT_ADC2_ADD10 = 0x28000001, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD11 = 0x28000002, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD12 = 0x28000004, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD13 = 0x28000008, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD14 = 0x28000010, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD15 = 0x28000020, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD16 = 0x28000040, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD17 = 0x28000080, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD18 = 0x28000100, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD19 = 0x28000200, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD20 = 0x28000400, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD21 = 0x28000800, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD22 = 0x28001000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD23 = 0x28002000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD24 = 0x28004000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD25 = 0x28008000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD26 = 0x28010000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD27 = 0x28020000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD28 = 0x28040000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADD29 = 0x28080000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADINC1 = 0x28100000, -+ SSP_PCAP_ADJ_BIT_ADC2_ADINC2 = 0x28200000, -+ SSP_PCAP_ADJ_BIT_ADC2_ASC = 0x28400000, -+ -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_AUDIHPF = 0x2c000001, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_SMB = 0x2c000002, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_AUDOHPF = 0x2c000004, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CD_TS = 0x2c000008, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_DLM = 0x2c000010, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_ADITH = 0x2c000020, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_CLK0 = 0x2c000040, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_CLK1 = 0x2c000080, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_CLK2 = 0x2c000100, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_INV = 0x2c000200, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_FS_INV = 0x2c000400, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_DF_RESET = 0x2c000800, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_EN = 0x2c001000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_CLK_EN = 0x2c002000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_FS_8K_16K = 0x2c004000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_DIG_AUD_IN = 0x2c008000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CLK_IN_SEL = 0x2c010000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2_MUX = 0x2c020000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2IG0 = 0x2c040000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2IG1 = 0x2c080000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2IG2 = 0x2c100000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2IG3 = 0x2c200000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2IG4 = 0x2c400000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_MIC2IG_PRI_ADJ = 0x2c800000, -+ SSP_PCAP_ADJ_BIT_AUD_CODEC_CDC_PRI_ADJ = 0x2c200000, -+ -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1_EN = 0x30000001, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A2_EN = 0x30000002, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A4_EN = 0x30000010, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_ARIGHT_EN = 0x30000020, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_ALEFT_EN = 0x30000040, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_CD_BYP = 0x30000080, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_CDC_SW = 0x30000100, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_ST_DAC_SW = 0x30000200, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_IN_SW = 0x30000400, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_R_EN = 0x30000800, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_PGA_L_EN = 0x30001000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_AUDOG0 = 0x30002000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_AUDOG1 = 0x30004000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_AUDOG2 = 0x30008000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_AUDOG3 = 0x30010000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_A1CTRL = 0x30020000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_MONO0 = 0x30080000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_MONO1 = 0x30100000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_AUDOG_PRI_ADJ = 0x30200000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_MONO_PRI_ADJ = 0x30400000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_RX_PRI_ADJ0 = 0x30800000, -+ SSP_PCAP_ADJ_BIT_AUD_RX_AMPS_RX_PRI_ADJ1 = 0x31000000, -+ -+ SSP_PCAP_ADJ_BIT_ST_DAC_SMB_ST_DAC = 0x34000001, -+ SSP_PCAP_ADJ_BIT_ST_DAC_STDET_EN = 0x34000002, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK0 = 0x34000004, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK1 = 0x34000008, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK2 = 0x34000010, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK_EN = 0x34000020, -+ SSP_PCAP_ADJ_BIT_ST_DAC_DF_RESET_ST_DAC = 0x34000040, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_EN = 0x34000080, -+ SSP_PCAP_ADJ_BIT_ST_DAC_SR0 = 0x34000100, -+ SSP_PCAP_ADJ_BIT_ST_DAC_SR1 = 0x34000200, -+ SSP_PCAP_ADJ_BIT_ST_DAC_SR2 = 0x34000400, -+ SSP_PCAP_ADJ_BIT_ST_DAC_SR3 = 0x34000800, -+ SSP_PCAP_ADJ_BIT_ST_DAC_DIG_AUD_IN_ST_DAC = 0x34001000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_DIG_AUD_FS0 = 0x34002000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_DIG_AUD_FS1 = 0x34004000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_BCLK0 = 0x34008000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_BCLK1 = 0x34010000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_CLK_INV = 0x34020000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_FS_INV = 0x34040000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_CLK_IN_SEL = 0x34080000, -+ SSP_PCAP_ADJ_BIT_ST_DAC_ST_DAC_PRI_ADJ = 0x35000000, -+ -+ SSP_PCAP_ADJ_BIT_BUSCTRL_FSENB = 0x50000001, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_USB_SUSPEND = 0x50000002, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_USB_PU = 0x50000004, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_USB_PD = 0x50000008, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_VUSB_EN = 0x50000010, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_USB_PS = 0x50000020, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_VUSB_MSTR_EN = 0x50000040, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_VBUS_PD_ENB = 0x50000080, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_CURRLIM = 0x50000100, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_RS232ENB = 0x50000200, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_RS232_DIR = 0x50000400, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_SE0_CONN = 0x50000800, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_USB_PDM = 0x50001000, -+ SSP_PCAP_ADJ_BIT_BUSCTRL_BUS_PRI_ADJ = 0x51000000, -+ -+ SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL0 = 0x54000001, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL1 = 0x54000002, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL2 = 0x54000004, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL3 = 0x54000008, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL_CTRL4 = 0x54000010, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_EN = 0x54000020, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_EN = 0x54000040, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_CTRL0 = 0x54000080, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_CTRL1 = 0x54000100, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_CTRL2 = 0x54000200, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_CTRL3 = 0x54000400, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_CTRL0 = 0x54000800, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_CTRL1 = 0x54001000, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_CTRL2 = 0x54002000, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_CTRL3 = 0x54004000, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_I0 = 0x54008000, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDR_I1 = 0x54010000, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_I0 = 0x54020000, -+ SSP_PCAP_ADJ_BIT_PERIPH_LEDG_I1 = 0x54040000, -+ SSP_PCAP_ADJ_BIT_PERIPH_SKIP = 0x54080000, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL0 = 0x54100000, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL1 = 0x54200000, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL2 = 0x54400000, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL3 = 0x54800000, -+ SSP_PCAP_ADJ_BIT_PERIPH_BL2_CTRL4 = 0x55000000, -+ -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_STBY = 0x60000001, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX2_LOWPWR = 0x60000002, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX3_STBY = 0x60000004, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX3_LOWPWR = 0x60000008, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX4_STBY = 0x60000010, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VAUX4_LOWPWR = 0x60000020, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VSIM_LOWPWR = 0x60000040, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VSIM2_LOWPWR = 0x60000080, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE00 = 0x60000100, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE01 = 0x60000200, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE10 = 0x60000400, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW1_MODE11 = 0x60000800, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW10_DVS = 0x60001000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW11_DVS = 0x60002000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW12_DVS = 0x60004000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW13_DVS = 0x60008000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW2_MODE00 = 0x60010000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW2_MODE01 = 0x60020000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW2_MODE10 = 0x60040000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW2_MODE11 = 0x60080000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW20_DVS = 0x60100000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW21_DVS = 0x60200000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW22_DVS = 0x60400000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_SW23_DVS = 0x60800000, -+ SSP_PCAP_ADJ_BIT_LOWPWR_CTRL_VC_STBY = 0x61000000, -+ -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIG0 = 0x68000001, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIG1 = 0x68000002, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIG2 = 0x68000004, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIG3 = 0x68000008, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIG4 = 0x68000010, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A3_EN = 0x68000020, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A3_MUX = 0x68000040, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A5_EN = 0x68000080, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A5_MUX = 0x68000100, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_EXT_MIC_MUX = 0x68000200, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_MB_ON2 = 0x68000400, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_MB_ON1 = 0x68000800, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A1ID_TX = 0x68001000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A1_CONFIG = 0x68002000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AHS_CONFIG = 0x68004000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_A2_CONFIG = 0x68008000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_LOWPWR = 0x68080000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIO_STBY = 0x68100000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_V2_EN_2 = 0x68200000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_AUDIG_PRI_ADJ = 0x68400000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_TX_PRI_ADJ0 = 0x68800000, -+ SSP_PCAP_ADJ_BIT_TX_AUD_AMPS_TX_PRI_ADJ1 = 0x69000000, -+ -+ SSP_PCAP_ADJ_BIT_SYS_RST_CLR = 0x6c000001, -+ SSP_PCAP_ADJ_BIT_SYS_RST_MODE0 = 0x6c000002, -+ SSP_PCAP_ADJ_BIT_SYS_RST_MODE1 = 0x6c000004, -+ SSP_PCAP_ADJ_BIT_SYS_VFLASH_0 = 0x6c000008, -+ SSP_PCAP_ADJ_BIT_SYS_VFLASH_1 = 0x6c000010, -+ SSP_PCAP_ADJ_BIT_SYS_MID_SELECT = 0x6c000020, -+ SSP_PCAP_ADJ_BIT_SYS_MID_FET = 0x6c000040, -+ SSP_PCAP_ADJ_BIT_SYS_MAIN_LOW = 0x6c000080, -+ SSP_PCAP_ADJ_BIT_SYS_BATTFB_DIS = 0x6c000100, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG9 = 0x6c000200, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG10 = 0x6c000400, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG11 = 0x6c000800, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG12 = 0x6c001000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG13 = 0x6c002000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG14 = 0x6c004000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG15 = 0x6c008000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG16 = 0x6c010000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG17 = 0x6c020000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG18 = 0x6c040000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG19 = 0x6c080000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG20 = 0x6c100000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG21 = 0x6c200000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG22 = 0x6c400000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG23 = 0x6c800000, -+ SSP_PCAP_ADJ_BIT_SYS_GP_REG24 = 0x6d000000 -+ -+}SSP_PCAP_SECONDARY_PROCESSOR_REGISTER_BIT_TYPE; -+ -+/************************ FUNCTION PROTOTYPES **************************************/ -+extern void ssp_pcap_init(void); -+extern void ssp_pcap_release(void); -+ -+extern void ssp_pcap_open(SSP_PCAP_INIT_DRIVER_TYPE portType); -+extern void ssp_pcap_close(void); -+ -+extern void ssp_pcap_intoSleep_callBack(void); -+extern void ssp_pcap_wakeUp_callBack(void); -+ -+ -+extern SSP_PCAP_STATUS SSP_PCAP_write_data_to_PCAP(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER ssp_pcap_register,U32 ssp_pcap_register_value); -+extern SSP_PCAP_STATUS SSP_PCAP_read_data_from_PCAP(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER ssp_pcap_register,P_U32 p_ssp_pcap_register_value); -+ -+extern SSP_PCAP_STATUS SSP_PCAP_bit_set(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER_BIT_TYPE ssp_pcap_bit ) ; -+extern SSP_PCAP_STATUS SSP_PCAP_bit_clean(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER_BIT_TYPE ssp_pcap_bit ) ; -+extern SSP_PCAP_BIT_STATUS SSP_PCAP_get_bit_from_buffer(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER_BIT_TYPE ssp_pcap_bit ) ; -+extern SSP_PCAP_BIT_STATUS SSP_PCAP_get_bit_from_PCAP(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER_BIT_TYPE ssp_pcap_bit ) ; -+extern U32 SSP_PCAP_get_register_value_from_buffer(SSP_PCAP_SECONDARY_PROCESSOR_REGISTER ssp_pcap_register ) ; -+ -+extern SSP_PCAP_STATUS SSP_PCAP_TSI_mode_set(TOUCH_SCREEN_DETECT_TYPE mode_Type ); -+extern SSP_PCAP_STATUS SSP_PCAP_TSI_start_XY_read(void); -+extern SSP_PCAP_STATUS SSP_PCAP_TSI_get_XY_value(P_U16 p_x,P_U16 p_y); -+extern SSP_PCAP_STATUS SSP_PCAP_CDC_CLK_set(PHONE_CDC_CLOCK_TYPE clkType); -+ -+extern SSP_PCAP_STATUS SSP_PCAP_CDC_SR_set(ST_SAMPLE_RATE_TYPE srType); -+extern SSP_PCAP_STATUS SSP_PCAP_BCLK_set(ST_BCLK_TIME_SLOT_TYPE bclkType); -+extern SSP_PCAP_STATUS SSP_PCAP_STCLK_set(ST_CLK_TYPE stClkType); -+extern SSP_PCAP_STATUS SSP_PCAP_DIG_AUD_FS_set(DIG_AUD_MODE_TYPE fsType); -+extern SSP_PCAP_STATUS SSP_PCAP_AUDIG_set(U32 audioInGain); -+extern SSP_PCAP_STATUS SSP_PCAP_MONO_set(MONO_TYPE monoType); -+extern SSP_PCAP_STATUS SSP_PCAP_AUDOG_set(U32 audioOutGain); -+ -+extern SSP_PCAP_STATUS SSP_PCAP_V_VIB_level_set(VibratorVoltageLevel_TYPE VIBLevelType); -+extern SSP_PCAP_STATUS SSP_PCAP_configure_USB_UART_transeiver(SSP_PCAP_PORT_TYPE portType); -+extern SSP_PCAP_BIT_STATUS SSP_PCAP_get_audio_in_status(void); -+ -+/* for log */ -+extern void pcap_log_add_pure_data(u8* pData,u32 len); -+extern void pcap_log_add_data(u8* pData,u32 len); -+ -+/* screen lock on/off handler */ -+extern void ssp_pcap_screenlock_lock(u32 data); -+extern void ssp_pcap_screenlock_unlock(u32 data); -+ ++/* driver configuration */ ++#define PCAP_CS_AH (1 << 0) /* CS pin is active high */ ++#define PCAP_MCI_SD (1 << 1) /* SD card slot */ ++#define PCAP_MCI_TF (1 << 2) /* TF card slot */ ++ ++#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000 ++#define PCAP_REGISTER_READ_OP_BIT 0x00000000 ++ ++#define PCAP_REGISTER_VALUE_MASK 0x01ffffff ++#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000 ++#define PCAP_REGISTER_ADDRESS_SHIFT 26 ++#define PCAP_REGISTER_NUMBER 32 ++#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff ++#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff ++ ++ ++#define pbit(reg, bit) ((reg << PCAP_REGISTER_ADDRESS_SHIFT) | bit) ++ ++/* registers acessible by both pcap ports */ ++#define PCAP_REG_ISR 0x0 /* Interrupt Status */ ++#define PCAP_REG_MSR 0x1 /* Interrupt Mask */ ++#define PCAP_REG_PSTAT 0x2 /* Processor Status */ ++#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */ ++#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */ ++#define PCAP_REG_BATT 0x8 /* Battery Control */ ++#define PCAP_REG_ADC1 0x9 /* AD Control */ ++#define PCAP_REG_ADC2 0xa /* AD Result */ ++#define PCAP_REG_CODEC 0xb /* Audio Codec Control */ ++#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */ ++#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */ ++#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */ ++#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */ ++#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */ ++#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */ ++#define PCAP_REG_GP 0x1b /* General Purpose */ ++ ++/* registers acessible by pcap port 1 only (a1200, e2 & e6) */ ++#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */ ++#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */ ++#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */ ++#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */ ++#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */ ++#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */ ++#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */ ++#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */ ++#define PCAP_REG_PWR 0x13 /* Power Control */ ++#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */ ++#define PCAP_REG_VENDOR_REV 0x17 ++#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */ ++ ++/* interrupts - registers 0, 1, 2, 3 */ ++#define PCAP_IRQ_ADCDONE (1 << 0) /* AD Conversion Done Port 1 */ ++#define PCAP_IRQ_TS (1 << 1) /* Touch Screen */ ++#define PCAP_IRQ_1HZ (1 << 2) /* 1HZ Timer */ ++#define PCAP_IRQ_WH (1 << 3) ++#define PCAP_IRQ_WL (1 << 4) ++#define PCAP_IRQ_TODA (1 << 5) ++#define PCAP_IRQ_USB4V (1 << 6) ++#define PCAP_IRQ_ONOFF (1 << 7) ++#define PCAP_IRQ_ONOFF2 (1 << 8) ++#define PCAP_IRQ_USB1V (1 << 9) ++#define PCAP_IRQ_MOBPORT (1 << 10) ++#define PCAP_IRQ_MB2 (1 << 11) /* Mic */ ++#define PCAP_IRQ_A1 (1 << 12) /* Audio jack */ ++#define PCAP_IRQ_ST (1 << 13) ++#define PCAP_IRQ_PC (1 << 14) ++#define PCAP_IRQ_WARM (1 << 15) ++#define PCAP_IRQ_EOL (1 << 16) ++#define PCAP_IRQ_CLK (1 << 17) ++#define PCAP_IRQ_SYSRST (1 << 18) ++#define PCAP_IRQ_ADCDONE2 (1 << 20) /* AD Conversion Done Port 2 */ ++#define PCAP_IRQ_SOFTRESET (1 << 21) ++#define PCAP_IRQ_MNEXB (1 << 22) ++ ++#define PCAP_BIT_VREG2_V1_STBY pbit(PCAP_REG_VREG2, (1 << 0)) ++#define PCAP_BIT_VREG2_V2_STBY pbit(PCAP_REG_VREG2, (1 << 1)) ++#define PCAP_BIT_VREG2_V3_STBY pbit(PCAP_REG_VREG2, (1 << 2)) ++#define PCAP_BIT_VREG2_V4_STBY pbit(PCAP_REG_VREG2, (1 << 3)) ++#define PCAP_BIT_VREG2_V5_STBY pbit(PCAP_REG_VREG2, (1 << 4)) ++#define PCAP_BIT_VREG2_V6_STBY pbit(PCAP_REG_VREG2, (1 << 5)) ++#define PCAP_BIT_VREG2_V7_STBY pbit(PCAP_REG_VREG2, (1 << 6)) ++#define PCAP_BIT_VREG2_V8_STBY pbit(PCAP_REG_VREG2, (1 << 7)) ++#define PCAP_BIT_VREG2_V9_STBY pbit(PCAP_REG_VREG2, (1 << 8)) ++#define PCAP_BIT_VREG2_V10_STBY pbit(PCAP_REG_VREG2, (1 << 9)) ++#define PCAP_BIT_VREG2_V1_LOWPWR pbit(PCAP_REG_VREG2, (1 << 10)) ++#define PCAP_BIT_VREG2_V2_LOWPWR pbit(PCAP_REG_VREG2, (1 << 11)) ++#define PCAP_BIT_VREG2_V3_LOWPWR pbit(PCAP_REG_VREG2, (1 << 12)) ++#define PCAP_BIT_VREG2_V4_LOWPWR pbit(PCAP_REG_VREG2, (1 << 13)) ++#define PCAP_BIT_VREG2_V5_LOWPWR pbit(PCAP_REG_VREG2, (1 << 14)) ++#define PCAP_BIT_VREG2_V6_LOWPWR pbit(PCAP_REG_VREG2, (1 << 15)) ++#define PCAP_BIT_VREG2_V7_LOWPWR pbit(PCAP_REG_VREG2, (1 << 16)) ++#define PCAP_BIT_VREG2_V8_LOWPWR pbit(PCAP_REG_VREG2, (1 << 17)) ++#define PCAP_BIT_VREG2_V9_LOWPWR pbit(PCAP_REG_VREG2, (1 << 18)) ++#define PCAP_BIT_VREG2_V10_LOWPWR pbit(PCAP_REG_VREG2, (1 << 19)) ++ ++#define PCAP_BIT_AUXVREG_VAUX1_EN pbit(PCAP_REG_AUXVREG, (1 << 1)) ++#define PCAP_AUXVREG_VAUX1_MASK 0x0000000c ++#define PCAP_AUXVREG_VAUX1_SHIFT 2 ++#define PCAP_BIT_AUXVREG_VAUX2_EN pbit(PCAP_REG_AUXVREG, (1 << 4)) ++#define PCAP_AUXVREG_VAUX2_MASK 0x00000060 ++#define PCAP_AUXVREG_VAUX2_SHIFT 5 ++#define PCAP_BIT_AUXVREG_VAUX3_EN pbit(PCAP_REG_AUXVREG, (1 << 7)) ++#define PCAP_AUXVREG_VAUX3_MASK 0x00000f00 ++#define PCAP_AUXVREG_VAUX3_SHIFT 8 ++#define PCAP_BIT_AUXVREG_VAUX4_EN pbit(PCAP_REG_AUXVREG, (1 << 12)) ++#define PCAP_AUXVREG_VAUX4_MASK 0x00006000 ++#define PCAP_AUXVREG_VAUX4_SHIFT 13 ++#define PCAP_BIT_AUXVREG_VSIM2_EN pbit(PCAP_REG_AUXVREG, (1 << 16)) ++#define PCAP_BIT_AUXVREG_VSIM_EN pbit(PCAP_REG_AUXVREG, (1 << 17)) ++#define PCAP_BIT_AUXVREG_VSIM_0 pbit(PCAP_REG_AUXVREG, (1 << 18)) ++#define PCAP_BIT_AUXVREG_V_VIB_EN pbit(PCAP_REG_AUXVREG, (1 << 19)) ++#define PCAP_AUXVREG_V_VIB_MASK 0x00300000 ++#define PCAP_AUXVREG_V_VIB_SHIFT 20 ++#define PCAP_BIT_AUXVREG_VAUX1_STBY pbit(PCAP_REG_AUXVREG, (1 << 22)) ++#define PCAP_BIT_AUXVREG_VAUX1_LOWPWR pbit(PCAP_REG_AUXVREG, (1 << 23)) ++#define PCAP_BIT_AUXVREG_SW3_STBY pbit(PCAP_REG_AUXVREG, (1 << 24)) ++ ++#define PCAP_BATT_DAC_MASK 0x000000ff ++#define PCAP_BATT_DAC_SHIFT 0 ++#define PCAP_BIT_BATT_B_FDBK pbit(PCAP_REG_BATT, (1 << 8)) ++#define PCAP_BIT_BATT_EXT_ISENSE pbit(PCAP_REG_BATT, (1 << 9)) ++#define PCAP_BATT_V_COIN_MASK 0x00003c00 ++#define PCAP_BATT_V_COIN_SHIFT 10 ++#define PCAP_BIT_BATT_I_COIN pbit(PCAP_REG_BATT, (1 << 14)) ++#define PCAP_BIT_BATT_COIN_CH_EN pbit(PCAP_REG_BATT, (1 << 15)) ++#define PCAP_BATT_EOL_SEL_MASK 0x000e0000 ++#define PCAP_BATT_EOL_SEL_SHIFT 17 ++#define PCAP_BIT_BATT_EOL_CMP_EN pbit(PCAP_REG_BATT, (1 << 20)) ++#define PCAP_BIT_BATT_BATT_DET_EN pbit(PCAP_REG_BATT, (1 << 21)) ++#define PCAP_BIT_BATT_THERMBIAS_CTRL pbit(PCAP_REG_BATT, (1 << 22)) ++ ++#define PCAP_BIT_ADC1_ADEN pbit(PCAP_REG_ADC1, (1 << 0)) ++#define PCAP_BIT_ADC1_RAND pbit(PCAP_REG_ADC1, (1 << 1)) ++#define PCAP_BIT_ADC1_AD_SEL1 pbit(PCAP_REG_ADC1, (1 << 2)) ++#define PCAP_BIT_ADC1_AD_SEL2 pbit(PCAP_REG_ADC1, (1 << 3)) ++#define PCAP_ADC1_ADA1_MASK 0x00000070 ++#define PCAP_ADC1_ADA1_SHIFT 4 ++#define PCAP_ADC1_ADA2_MASK 0x00000380 ++#define PCAP_ADC1_ADA2_SHIFT 7 ++#define PCAP_ADC1_ATO_MASK 0x00003c00 ++#define PCAP_ADC1_ATO_SHIFT 10 ++#define PCAP_BIT_ADC1_ATOX pbit(PCAP_REG_ADC1, (1 << 14)) ++#define PCAP_BIT_ADC1_MTR1 pbit(PCAP_REG_ADC1, (1 << 15)) ++#define PCAP_BIT_ADC1_MTR2 pbit(PCAP_REG_ADC1, (1 << 16)) ++#define PCAP_ADC1_TS_M_MASK 0x000e0000 ++#define PCAP_ADC1_TS_M_SHIFT 17 ++#define PCAP_BIT_ADC1_TS_REF_LOWPWR pbit(PCAP_REG_ADC1, (1 << 20)) ++#define PCAP_BIT_ADC1_TS_REFENB pbit(PCAP_REG_ADC1, (1 << 21)) ++#define PCAP_BIT_ADC1_BATT_I_POLARITY pbit(PCAP_REG_ADC1, (1 << 22)) ++#define PCAP_BIT_ADC1_BATT_I_ADC pbit(PCAP_REG_ADC1, (1 << 23)) ++ ++#define PCAP_ADC2_ADD1_MASK 0x000003ff ++#define PCAP_ADC2_ADD1_SHIFT 0 ++#define PCAP_ADC2_ADD2_MASK 0x000ffc00 ++#define PCAP_ADC2_ADD2_SHIFT 10 ++#define PCAP_BIT_ADC2_ADINC1 pbit(PCAP_REG_ADC2, (1 << 20)) ++#define PCAP_BIT_ADC2_ADINC2 pbit(PCAP_REG_ADC2, (1 << 21)) ++#define PCAP_BIT_ADC2_ASC pbit(PCAP_REG_ADC2, (1 << 22)) ++ ++#define PCAP_BIT_BUSCTRL_FSENB 0x50000001 ++#define PCAP_BIT_BUSCTRL_USB_SUSPEND 0x50000002 ++#define PCAP_BIT_BUSCTRL_USB_PU 0x50000004 ++#define PCAP_BIT_BUSCTRL_USB_PD 0x50000008 ++#define PCAP_BIT_BUSCTRL_VUSB_EN 0x50000010 ++#define PCAP_BIT_BUSCTRL_USB_PS 0x50000020 ++#define PCAP_BIT_BUSCTRL_VUSB_MSTR_EN 0x50000040 ++#define PCAP_BIT_BUSCTRL_VBUS_PD_ENB 0x50000080 ++#define PCAP_BIT_BUSCTRL_CURRLIM 0x50000100 ++#define PCAP_BIT_BUSCTRL_RS232ENB 0x50000200 ++#define PCAP_BIT_BUSCTRL_RS232_DIR 0x50000400 ++#define PCAP_BIT_BUSCTRL_SE0_CONN 0x50000800 ++#define PCAP_BIT_BUSCTRL_USB_PDM 0x50001000 ++#define PCAP_BIT_BUSCTRL_BUS_PRI_ADJ 0x51000000 ++ ++#define PCAP_BIT_PERIPH_BL_CTRL0 0x54000001 ++#define PCAP_BIT_PERIPH_BL_CTRL1 0x54000002 ++#define PCAP_BIT_PERIPH_BL_CTRL2 0x54000004 ++#define PCAP_BIT_PERIPH_BL_CTRL3 0x54000008 ++#define PCAP_BIT_PERIPH_BL_CTRL4 0x54000010 ++#define PCAP_BIT_PERIPH_LEDR_EN 0x54000020 ++#define PCAP_BIT_PERIPH_LEDG_EN 0x54000040 ++#define PCAP_BIT_PERIPH_LEDR_CTRL0 0x54000080 ++#define PCAP_BIT_PERIPH_LEDR_CTRL1 0x54000100 ++#define PCAP_BIT_PERIPH_LEDR_CTRL2 0x54000200 ++#define PCAP_BIT_PERIPH_LEDR_CTRL3 0x54000400 ++#define PCAP_BIT_PERIPH_LEDG_CTRL0 0x54000800 ++#define PCAP_BIT_PERIPH_LEDG_CTRL1 0x54001000 ++#define PCAP_BIT_PERIPH_LEDG_CTRL2 0x54002000 ++#define PCAP_BIT_PERIPH_LEDG_CTRL3 0x54004000 ++#define PCAP_BIT_PERIPH_LEDR_I0 0x54008000 ++#define PCAP_BIT_PERIPH_LEDR_I1 0x54010000 ++#define PCAP_BIT_PERIPH_LEDG_I0 0x54020000 ++#define PCAP_BIT_PERIPH_LEDG_I1 0x54040000 ++#define PCAP_BIT_PERIPH_SKIP 0x54080000 ++#define PCAP_BIT_PERIPH_BL2_CTRL0 0x54100000 ++#define PCAP_BIT_PERIPH_BL2_CTRL1 0x54200000 ++#define PCAP_BIT_PERIPH_BL2_CTRL2 0x54400000 ++#define PCAP_BIT_PERIPH_BL2_CTRL3 0x54800000 ++#define PCAP_BIT_PERIPH_BL2_CTRL4 0x55000000 ++ ++#define PCAP_BIT_LOWPWR_VAUX2_STBY 0x60000001 ++#define PCAP_BIT_LOWPWR_VAUX2_LOWPWR 0x60000002 ++#define PCAP_BIT_LOWPWR_VAUX3_STBY 0x60000004 ++#define PCAP_BIT_LOWPWR_VAUX3_LOWPWR 0x60000008 ++#define PCAP_BIT_LOWPWR_VAUX4_STBY 0x60000010 ++#define PCAP_BIT_LOWPWR_VAUX4_LOWPWR 0x60000020 ++#define PCAP_BIT_LOWPWR_VSIM_LOWPWR 0x60000040 ++#define PCAP_BIT_LOWPWR_VSIM2_LOWPWR 0x60000080 ++#define PCAP_BIT_LOWPWR_SW1_MODE00 0x60000100 ++#define PCAP_BIT_LOWPWR_SW1_MODE01 0x60000200 ++#define PCAP_BIT_LOWPWR_SW1_MODE10 0x60000400 ++#define PCAP_BIT_LOWPWR_SW1_MODE11 0x60000800 ++#define PCAP_BIT_LOWPWR_SW10_DVS 0x60001000 ++#define PCAP_BIT_LOWPWR_SW11_DVS 0x60002000 ++#define PCAP_BIT_LOWPWR_SW12_DVS 0x60004000 ++#define PCAP_BIT_LOWPWR_SW13_DVS 0x60008000 ++#define PCAP_BIT_LOWPWR_SW2_MODE00 0x60010000 ++#define PCAP_BIT_LOWPWR_SW2_MODE01 0x60020000 ++#define PCAP_BIT_LOWPWR_SW2_MODE10 0x60040000 ++#define PCAP_BIT_LOWPWR_SW2_MODE11 0x60080000 ++#define PCAP_BIT_LOWPWR_SW20_DVS 0x60100000 ++#define PCAP_BIT_LOWPWR_SW21_DVS 0x60200000 ++#define PCAP_BIT_LOWPWR_SW22_DVS 0x60400000 ++#define PCAP_BIT_LOWPWR_SW23_DVS 0x60800000 ++#define PCAP_BIT_LOWPWR_VC_STBY 0x61000000 ++ ++extern int ezx_pcap_write(u_int8_t, u_int32_t); ++extern int ezx_pcap_read(u_int8_t, u_int32_t *); ++extern int ezx_pcap_bit_set(u_int32_t, u_int8_t); ++extern int ezx_pcap_bit_get(u_int32_t); ++extern void ezx_pcap_vibrator_level(u_int32_t); +#endif Index: linux-2.6.21/include/asm-arm/arch-pxa/irqs.h =================================================================== ---- linux-2.6.21.orig/include/asm-arm/arch-pxa/irqs.h 2007-06-29 01:06:37.000000000 -0300 -+++ linux-2.6.21/include/asm-arm/arch-pxa/irqs.h 2007-06-29 01:07:18.000000000 -0300 +--- linux-2.6.21.orig/include/asm-arm/arch-pxa/irqs.h 2007-08-31 22:28:17.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/irqs.h 2007-08-31 22:34:36.000000000 -0300 +@@ -85,7 +85,7 @@ + * within sensible limits. + */ + #define IRQ_BOARD_START (IRQ_GPIO(PXA_LAST_GPIO) + 1) +-#define IRQ_BOARD_END (IRQ_BOARD_START + 16) ++#define IRQ_BOARD_END (IRQ_BOARD_START + 22) + + #define IRQ_SA1111_START (IRQ_BOARD_END) + #define IRQ_GPAIN0 (IRQ_BOARD_END + 0) @@ -176,7 +176,8 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ @@ -1198,7 +791,7 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/irqs.h #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) -@@ -222,3 +223,13 @@ +@@ -222,3 +223,28 @@ #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) @@ -1212,10 +805,25 @@ Index: linux-2.6.21/include/asm-arm/arch-pxa/irqs.h +#define EZX_IRQ_ADCDONE EZX_IRQ(4) +#define EZX_IRQ_TS EZX_IRQ(5) /* TS touch */ +#define EZX_IRQ_ADCDONE2 EZX_IRQ(6) /* TS x/y ADC ready */ ++#define EZX_IRQ_WH EZX_IRQ(7) ++#define EZX_IRQ_WL EZX_IRQ(8) ++#define EZX_IRQ_ONOFF EZX_IRQ(9) ++#define EZX_IRQ_ONOFF2 EZX_IRQ(10) ++#define EZX_IRQ_MOBPORT EZX_IRQ(11) ++#define EZX_IRQ_TODA EZX_IRQ(12) ++#define EZX_IRQ_1HZ EZX_IRQ(13) ++#define EZX_IRQ_MNEXB EZX_IRQ(14) ++#define EZX_IRQ_ST EZX_IRQ(15) ++#define EZX_IRQ_PC EZX_IRQ(16) ++#define EZX_IRQ_SYSRST EZX_IRQ(17) ++#define EZX_IRQ_SOFTRESET EZX_IRQ(18) ++#define EZX_IRQ_EOL EZX_IRQ(19) ++#define EZX_IRQ_CLK EZX_IRQ(20) ++#define EZX_IRQ_WARM EZX_IRQ(21) Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-06-29 01:07:18.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-08-01 20:14:28.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-08-31 22:33:05.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-09-07 11:06:01.000000000 -0300 @@ -105,6 +105,9 @@ config EZX_BP bool "BP Control code for EZX Platform" @@ -1228,8 +836,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig endmenu Index: linux-2.6.21/arch/arm/mach-pxa/Makefile =================================================================== ---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-06-29 01:07:18.000000000 -0300 -+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-08-01 20:14:28.000000000 -0300 +--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-08-31 22:33:05.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-09-07 11:06:01.000000000 -0300 @@ -25,6 +25,7 @@ obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/i2c-core-fix-a1200.patch b/packages/linux/linux-ezx-2.6.21/patches/i2c-core-fix-a1200.patch new file mode 100644 index 0000000000..bd69e38bd7 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/i2c-core-fix-a1200.patch @@ -0,0 +1,15 @@ +Index: linux-2.6.21/drivers/i2c/i2c-core.c +=================================================================== +--- linux-2.6.21.orig/drivers/i2c/i2c-core.c 2007-08-20 21:59:45.000000000 +0800 ++++ linux-2.6.21/drivers/i2c/i2c-core.c 2007-08-20 22:03:12.000000000 +0800 +@@ -365,8 +365,10 @@ + list_for_each(item,&adapters) { + adapter = list_entry(item, struct i2c_adapter, list); + driver->attach_adapter(adapter); ++ goto out; // Alex added for fix the bug otherwise system will be crashed. FIXME + } + } ++out: + + mutex_unlock(&core_lists); + return 0; diff --git a/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch index 28b9c557d3..40ed7f4605 100755 --- a/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch +++ b/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch @@ -1,7 +1,7 @@ Index: linux-2.6.21/drivers/input/touchscreen/Kconfig =================================================================== ---- linux-2.6.21.orig/drivers/input/touchscreen/Kconfig 2007-06-02 20:17:58.000000000 -0300 -+++ linux-2.6.21/drivers/input/touchscreen/Kconfig 2007-06-02 20:18:40.000000000 -0300 +--- linux-2.6.21.orig/drivers/input/touchscreen/Kconfig 2007-08-31 22:27:48.000000000 -0300 ++++ linux-2.6.21/drivers/input/touchscreen/Kconfig 2007-08-31 23:06:39.000000000 -0300 @@ -164,4 +164,13 @@ To compile this driver as a module, choose M here: the module will be called ucb1400_ts. @@ -19,8 +19,8 @@ Index: linux-2.6.21/drivers/input/touchscreen/Kconfig Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21/drivers/input/touchscreen/pcap_ts.c 2007-06-02 20:19:39.000000000 -0300 -@@ -0,0 +1,372 @@ ++++ linux-2.6.21/drivers/input/touchscreen/pcap_ts.c 2007-08-31 23:57:56.000000000 -0300 +@@ -0,0 +1,331 @@ +/* + * pcap_ts.c - Touchscreen driver for Motorola PCAP2 based touchscreen as found + * in the EZX phone platform. @@ -58,23 +58,21 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c +#define DEBUGP(x, args ...) +#endif + -+#define PRESSURE 1 -+#define COORDINATE 2 -+#define STANDBY 3 -+ -+extern int ezx_pcap_read(u_int8_t, u_int32_t *); -+extern int ezx_pcap_write(u_int8_t, u_int32_t); -+extern int ezx_pcap_bit_set(u_int32_t, u_int8_t); ++#define POSITION_X_MEASUREMENT 0 ++#define POSITION_XY_MEASUREMENT 1 ++#define PRESSURE_MEASUREMENT 2 ++#define PLATE_X_MEASUREMENT 3 ++#define PLATE_Y_MEASUREMENT 4 ++#define STANDBY_MODE 5 ++#define NONTS_MODE 6 + +struct pcap_ts { + int irq_xy; + int irq_touch; + struct input_dev *input; + struct timer_list timer; -+ + u_int16_t x, y; + u_int16_t pressure; -+ + u_int8_t read_state; +}; + @@ -91,27 +89,31 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c +#define SAMPLE_INTERVAL (HZ/50) + + -+static void pcap_ts_mode(u_int32_t mode) ++static void pcap_ts_mode(struct pcap_ts *pcap_ts, u_int32_t mode) +{ + u_int32_t tmp; + -+ ezx_pcap_read(SSP_PCAP_ADJ_ADC1_REGISTER, &tmp); -+ tmp &= ~SSP_PCAP_TOUCH_PANEL_POSITION_DETECT_MODE_MASK; -+ tmp |= mode; -+ ezx_pcap_write(SSP_PCAP_ADJ_ADC1_REGISTER, tmp); ++ pcap_ts->read_state = mode; ++ ezx_pcap_read(PCAP_REG_ADC1, &tmp); ++ tmp &= ~PCAP_ADC1_TS_M_MASK; ++ tmp |= ((mode << PCAP_ADC1_TS_M_SHIFT) & PCAP_ADC1_TS_M_MASK); ++ ezx_pcap_write(PCAP_REG_ADC1, tmp); +} + -+/* issue a XY read command to the ADC of PCAP2. Well get an ADCDONE2 interrupt ++/* issue a XY read command to the ADC of PCAP2. Well get an ADCDONE interrupt + * once the result of the conversion is available */ +static void pcap_ts_start_xy_read(struct pcap_ts *pcap_ts) +{ + u_int32_t tmp; + -+ ezx_pcap_read(SSP_PCAP_ADJ_ADC1_REGISTER, &tmp); -+ tmp &= SSP_PCAP_ADC_START_VALUE_SET_MASK; -+ tmp |= SSP_PCAP_ADC_START_VALUE; -+ ezx_pcap_write(SSP_PCAP_ADJ_ADC1_REGISTER, tmp); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ADC2_ASC, 1); ++ ezx_pcap_read(PCAP_REG_ADC1, &tmp); ++ tmp &= ~(PCAP_BIT_ADC1_RAND | PCAP_ADC1_ADA1_MASK | ++ PCAP_ADC1_ADA2_MASK); ++ tmp |= (PCAP_BIT_ADC1_ADEN | PCAP_BIT_ADC1_AD_SEL1 | ++ PCAP_BIT_ADC1_AD_SEL2 | (5 << PCAP_ADC1_ADA1_SHIFT) | ++ (3 << PCAP_ADC1_ADA2_SHIFT)); ++ ezx_pcap_write(PCAP_REG_ADC1, tmp); ++ ezx_pcap_bit_set(PCAP_BIT_ADC2_ASC, 1); +} + +/* read the XY result from the ADC of PCAP2 */ @@ -119,17 +121,17 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c +{ + u_int32_t tmp; + -+ ezx_pcap_read(SSP_PCAP_ADJ_ADC2_REGISTER, &tmp); ++ ezx_pcap_read(PCAP_REG_ADC2, &tmp); + -+ if (pcap_ts->read_state == COORDINATE && !(tmp & 0x00400000)) { -+ pcap_ts->x = (tmp & SSP_PCAP_ADD1_VALUE_MASK); -+ pcap_ts->y = (tmp & SSP_PCAP_ADD2_VALUE_MASK) -+ >>SSP_PCAP_ADD2_VALUE_SHIFT; ++ if (pcap_ts->read_state == POSITION_XY_MEASUREMENT) { ++ pcap_ts->x = (tmp & PCAP_ADC2_ADD1_MASK) >> ++ PCAP_ADC2_ADD1_SHIFT; ++ pcap_ts->y = (tmp & PCAP_ADC2_ADD2_MASK) >> ++ PCAP_ADC2_ADD2_SHIFT; + } else { -+ pcap_ts->pressure = (tmp & SSP_PCAP_ADD2_VALUE_MASK) -+ >>SSP_PCAP_ADD2_VALUE_SHIFT; ++ pcap_ts->pressure = (tmp & PCAP_ADC2_ADD2_MASK) >> ++ PCAP_ADC2_ADD2_SHIFT; + } -+ +} + +/* PCAP2 interrupts us when ADC conversion result is available */ @@ -139,11 +141,10 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + + pcap_ts_get_xy_value(pcap_ts); + DEBUGP(KERN_DEBUG "%s X=%4d, Y=%4d Z=%4d ", -+ pcap_ts->read_state == COORDINATE ? "COORD" : "PRESS", -+ pcap_ts->x, pcap_ts->y, pcap_ts->pressure); -+ ++ pcap_ts->read_state == POSITION_XY_MEASUREMENT ? "COORD" : ++ "PRESS", pcap_ts->x, pcap_ts->y, pcap_ts->pressure); + switch (pcap_ts->read_state) { -+ case PRESSURE: ++ case PRESSURE_MEASUREMENT: + if (pcap_ts->pressure >= PRESSURE_MAX || + pcap_ts->pressure <= PRESSURE_MIN ) { + /* pen has been released (or cant read pressure - WM)*/ @@ -156,11 +157,10 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + input_report_abs(pcap_ts->input, ABS_PRESSURE, pcap_ts->pressure); + } + /* switch state machine into coordinate read mode */ -+ pcap_ts->read_state = COORDINATE; -+ pcap_ts_mode(PCAP_TS_POSITION_XY_MEASUREMENT); ++ pcap_ts_mode(pcap_ts, POSITION_XY_MEASUREMENT); + pcap_ts_start_xy_read(pcap_ts); + break; -+ case COORDINATE: ++ case POSITION_XY_MEASUREMENT: + if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX || + pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) { + /* pen has been released */ @@ -175,17 +175,15 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + + /* ask PCAP2 to interrupt us if touch event happens + * again */ -+ pcap_ts->read_state = STANDBY; -+ pcap_ts_mode(PCAP_TS_STANDBY_MODE); -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_MSR_TSM, 0); ++ pcap_ts_mode(pcap_ts, STANDBY_MODE); ++ enable_irq(pcap_ts->irq_touch); + } else { + DEBUGP("DOWN\n"); + input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x); + input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y); + + /* switch back to pressure read mode */ -+ pcap_ts->read_state = PRESSURE; -+ pcap_ts_mode(PCAP_TS_PRESSURE_MEASUREMENT); ++ pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT); + mod_timer(&pcap_ts->timer, jiffies + SAMPLE_INTERVAL); + } + input_sync(pcap_ts->input); @@ -194,7 +192,6 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + DEBUGP("ERROR\n"); + break; + } -+ + return IRQ_HANDLED; +} + @@ -202,17 +199,14 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c +static irqreturn_t pcap_ts_irq_touch(int irq, void *dev_id) +{ + struct pcap_ts *pcap_ts = dev_id; -+ + /* mask Touchscreen interrupt bit, prevents further touch events + * from being reported to us until we're finished with reading + * both pressure and x/y from ADC */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_MSR_TSM, 1); ++ disable_irq(pcap_ts->irq_touch); + + DEBUGP("touched!!\n"); -+ pcap_ts_mode(PCAP_TS_PRESSURE_MEASUREMENT); -+ pcap_ts->read_state = PRESSURE; ++ pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT); + pcap_ts_start_xy_read(pcap_ts); -+ + return IRQ_HANDLED; +} + @@ -225,8 +219,6 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + +static int __init ezxts_probe(struct platform_device *pdev) +{ -+ int ret; -+ u_int32_t tmp; + struct pcap_ts *pcap_ts; + struct input_dev *input_dev; + int err = -ENOMEM; @@ -248,35 +240,8 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + goto fail; + } + -+ // Some initialization before done in ssp_pcap_open() -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_TS_REFENB, 0); -+ // ack interrupts -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ISR_ADCDONE2I, 1); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ISR_TSI, 1); -+ // unmask interrupts -+ // ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_MSR_TSM, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_MSR_ADCDONE2M, 0); -+ // set adc bits? FIXME I dont think its necessary - WM -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC2_ADINC1, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC2_ADINC2, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_ATO0, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_ATO1, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_ATO2, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_ATO3, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_ATOX, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_MTR1, 0); -+ ezx_pcap_bit_set( SSP_PCAP_ADJ_BIT_ADC1_MTR2, 0); -+ -+ ret = ezx_pcap_read(SSP_PCAP_ADJ_ADC1_REGISTER, &tmp); -+ if (ret < 0) -+ return ret; -+ -+ tmp &= (~SSP_PCAP_TOUCH_PANEL_POSITION_DETECT_MODE_MASK); -+ tmp |= PCAP_TS_STANDBY_MODE; -+ -+ ret = ezx_pcap_write(SSP_PCAP_ADJ_ADC1_REGISTER, tmp); -+ if (ret < 0) -+ return ret; ++ ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REFENB, 0); ++ pcap_ts_mode(pcap_ts, STANDBY_MODE); + + err = request_irq(pcap_ts->irq_xy, pcap_ts_irq_xy, SA_INTERRUPT, + "pcap-ts X/Y", pcap_ts); @@ -301,12 +266,6 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + + platform_set_drvdata(pdev, pcap_ts); + -+ pcap_ts->read_state = STANDBY; -+ pcap_ts_mode(PCAP_TS_STANDBY_MODE); -+ -+ /* enable pressure interrupt */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_MSR_TSM, 0); -+ + input_dev->name = "pcap-touchscreen"; + input_dev->phys = "ezxts/input0"; + input_dev->id.bustype = BUS_HOST; @@ -353,15 +312,15 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c + +static int ezxts_suspend(struct platform_device *dev, pm_message_t state) +{ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ADC1_TS_REF_LOWPWR, 1); ++ ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 1); + return 0; +} + +static int ezxts_resume(struct platform_device *dev) +{ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_ADC1_TS_REF_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 0); + /* just in case we suspend with TSI masked. */ -+ ezx_pcap_bit_set(SSP_PCAP_ADJ_BIT_MSR_TSM, 0); ++// ezx_pcap_bit_set(PCAP_BIT_MSR_TSM, 0); + return 0; +} + @@ -395,8 +354,8 @@ Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c +MODULE_LICENSE("GPL"); Index: linux-2.6.21/drivers/input/touchscreen/Makefile =================================================================== ---- linux-2.6.21.orig/drivers/input/touchscreen/Makefile 2007-06-02 20:17:58.000000000 -0300 -+++ linux-2.6.21/drivers/input/touchscreen/Makefile 2007-06-02 20:18:40.000000000 -0300 +--- linux-2.6.21.orig/drivers/input/touchscreen/Makefile 2007-08-31 22:27:48.000000000 -0300 ++++ linux-2.6.21/drivers/input/touchscreen/Makefile 2007-08-31 23:06:39.000000000 -0300 @@ -16,3 +16,4 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o diff --git a/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-fix-a1200.patch b/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-fix-a1200.patch new file mode 100644 index 0000000000..9ee87ff903 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-fix-a1200.patch @@ -0,0 +1,35 @@ +Index: linux-2.6.21/drivers/usb/gadget/ether.c +=================================================================== +--- linux-2.6.21.orig/drivers/usb/gadget/ether.c 2007-08-20 22:05:12.000000000 +0800 ++++ linux-2.6.21/drivers/usb/gadget/ether.c 2007-08-20 22:06:25.000000000 +0800 +@@ -2697,10 +2697,16 @@ + MODULE_LICENSE ("GPL"); + + +-static int __init init (void) ++// Alex add FIXME ++int usb_ether_init (void) + { + return usb_gadget_register_driver (ð_driver); + } ++ ++static int __init init (void) ++{ ++// return usb_gadget_register_driver (ð_driver); ++} + module_init (init); + + static void __exit cleanup (void) +Index: linux-2.6.21/drivers/usb/gadget/pxa27x_udc.c +=================================================================== +--- linux-2.6.21.orig/drivers/usb/gadget/pxa27x_udc.c 2007-08-20 22:07:31.000000000 +0800 ++++ linux-2.6.21/drivers/usb/gadget/pxa27x_udc.c 2007-08-20 22:07:47.000000000 +0800 +@@ -2227,6 +2227,8 @@ + udc_init_ep(udc); + udc_reinit(udc); + ++ usb_ether_init(); // Alex add FIXME ++ + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(IRQ_USB, pxa27x_udc_irq, + SA_INTERRUPT, driver_name, udc); diff --git a/packages/linux/linux-ezx_2.6.21.bb b/packages/linux/linux-ezx_2.6.21.bb index c64d9a7c78..cd97c21930 100644 --- a/packages/linux/linux-ezx_2.6.21.bb +++ b/packages/linux/linux-ezx_2.6.21.bb @@ -4,7 +4,7 @@ AUTHOR = "Harald Welte and the OpenEZX Team <openezx-devel@lists.openezx.org>" HOMEPAGE = "http://www.openezx.org" LICENSE = "GPL" EZX = "ezxdev" -PR = "${EZX}-r9" +PR = "${EZX}-r10" inherit kernel @@ -38,6 +38,8 @@ SRC_URI = " \ file://patches/a780-ts.patch;patch=1 \ file://patches/e680-ts.patch;patch=1 \ file://patches/a1200-ts.patch;patch=1 \ + file://patches/ezx-eoc.patch;patch=1 \ + file://patches/a1200-eoc.patch;patch=1 \ file://patches/ezx-backlight.patch;patch=1 \ file://patches/a780-flip.patch;patch=1 \ file://patches/e680-locksw.patch;patch=1 \ @@ -54,7 +56,8 @@ SRC_URI = " \ file://patches/mux-fix-tty-driver.patch;patch=1 \ file://patches/mux-linux-2.6.21-fix.patch;patch=1 \ file://patches/asoc-pxa-ssp.patch;patch=1 \ - http://shell.studenti.unina.it/~ospite/tmp/ezx-asoc-preview.patch;patch=1 \ + file://patches/asoc-fix-loopback.patch;patch=1 \ + file://patches/ezx-asoc.patch;patch=1 \ file://defconfig \ \ " |