summaryrefslogtreecommitdiff
path: root/packages/linux
diff options
context:
space:
mode:
authorBernhard Guillon <Bernhard.Guillon@opensimpad.org>2007-05-07 17:39:17 +0000
committerMarcin Juszkiewicz <hrw@openembedded.org>2007-05-07 17:39:17 +0000
commit32eac857b106e0bcc42c792499917950a2c64d4b (patch)
treee4c3fdb59aa038a0cb38d3d55a68b2e9849c24b0 /packages/linux
parent6a03b70703bd0f335b9709c0b2386858f7b82291 (diff)
linux: added 2.6.21 for Simpad (progear need refresh of config) - close #2247
Diffstat (limited to 'packages/linux')
-rw-r--r--packages/linux/linux/simpad/defconfig161
-rw-r--r--packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch315
-rw-r--r--packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch2511
-rw-r--r--packages/linux/linux/simpad/linux-2.6.21-SIMpad-serial-and-gpio_keys.patch194
-rw-r--r--packages/linux/linux/simpad/linux-2.6.21-SIMpad-ucb1x00-switches.patch189
-rw-r--r--packages/linux/linux/simpad/linux-2.6.21-pcmcia-device-to-platform-driver.patch54
-rw-r--r--packages/linux/linux_2.6.21.bb23
7 files changed, 3344 insertions, 103 deletions
diff --git a/packages/linux/linux/simpad/defconfig b/packages/linux/linux/simpad/defconfig
index 2115d30a2c..36d5e942b4 100644
--- a/packages/linux/linux/simpad/defconfig
+++ b/packages/linux/linux/simpad/defconfig
@@ -1,11 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Mon Apr 2 11:51:54 2007
+# Linux kernel version: 2.6.21
+# Sun May 6 14:01:42 2007
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -15,6 +18,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -35,6 +39,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@@ -43,7 +48,7 @@ CONFIG_SYSVIPC=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -71,9 +76,8 @@ CONFIG_BASE_SMALL=0
# Loadable module support
#
CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -122,6 +126,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -167,6 +172,7 @@ CONFIG_CPU_CP15_MMU=y
#
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
@@ -177,7 +183,7 @@ CONFIG_ISA=y
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
+# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
@@ -208,6 +214,7 @@ CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
@@ -220,6 +227,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
# CPU Frequency scaling
@@ -249,11 +257,10 @@ CONFIG_BINFMT_MISC=m
# Power management options
#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-CONFIG_PM_DEBUG=y
-CONFIG_DISABLE_CONSOLE_SUSPEND=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM=y
+# CONFIG_APM_EMULATION is not set
#
# Networking
@@ -270,6 +277,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -403,12 +411,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
CONFIG_WIRELESS_EXT=y
#
@@ -422,6 +425,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -528,6 +532,7 @@ CONFIG_MTD_SA1100=y
# Plug and Play support
#
# CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -540,38 +545,13 @@ CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
#
# SCSI device support
@@ -749,7 +729,14 @@ CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -798,7 +785,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -836,12 +823,6 @@ CONFIG_HW_RANDOM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
-
-#
-# Hardware Monitoring - Battery
-#
-CONFIG_BATTERY_MONITOR=y
-CONFIG_MCP_UCB1200_SIMPAD_BATTERY=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
@@ -852,7 +833,11 @@ CONFIG_MCP_UCB1200_SIMPAD_BATTERY=y
#
# Misc devices
#
-# CONFIG_TIFM_CORE is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia Capabilities Port drivers
@@ -889,15 +874,26 @@ CONFIG_MCP_UCB1200_SWITCHES=y
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_SIMPAD=y
+CONFIG_LCD_SIMPAD=y
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
# CONFIG_FB_SA1100 is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_MQ200=y
@@ -922,13 +918,6 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_FB_MQ200_LCD=y
-CONFIG_FB_MQ200_BACKLIGHT=y
#
# Sound
@@ -949,6 +938,7 @@ CONFIG_SOUND=y
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
@@ -997,7 +987,7 @@ CONFIG_REISERFS_FS=m
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
@@ -1010,7 +1000,6 @@ CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
@@ -1034,8 +1023,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1160,16 +1148,17 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1180,6 +1169,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
@@ -1194,43 +1184,7 @@ CONFIG_DEBUG_LL=y
#
# Cryptographic options
#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
#
# Library routines
@@ -1243,4 +1197,5 @@ CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch
new file mode 100644
index 0000000000..6d6c373271
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch
@@ -0,0 +1,315 @@
+diff -uNr linux-2.6.21.vanilla/arch/arm/mach-sa1100/Makefile linux-2.6.21/arch/arm/mach-sa1100/Makefile
+--- linux-2.6.21.vanilla/arch/arm/mach-sa1100/Makefile 2007-05-01 16:40:44.000000000 +0200
++++ linux-2.6.21/arch/arm/mach-sa1100/Makefile 2007-05-01 16:52:10.000000000 +0200
+@@ -40,6 +40,7 @@
+ obj-$(CONFIG_SA1100_SHANNON) += shannon.o
+
+ obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
++obj-$(CONFIG_SA1100_SIMPAD) += cs3-simpad.o
+ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o
+
+ # LEDs support
+diff -uNr linux-2.6.21.vanilla/arch/arm/mach-sa1100/cs3-simpad.c linux-2.6.21/arch/arm/mach-sa1100/cs3-simpad.c
+--- linux-2.6.21.vanilla/arch/arm/mach-sa1100/cs3-simpad.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/arch/arm/mach-sa1100/cs3-simpad.c 2007-05-01 16:52:10.000000000 +0200
+@@ -0,0 +1,300 @@
++/*
++ * cs3-simpad.c
++ *
++ * This driver shows the GPIO states of the cs3 latch. You can also
++ * switch some GPIOS.
++ *
++ * (c) 2007 Bernhard Guillon <Bernhard.Guillon@OpenSIMpad.org>
++ *
++ * You may use this code as per GPL version 2
++ *
++ * Some parts are based on battery.c
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/device.h>
++
++#include <asm/arch/simpad.h>
++
++extern long get_cs3_shadow(void);
++extern void set_cs3_bit(int value);
++extern void clear_cs3_bit(int value);
++
++struct cs3 {
++ struct class_device class_dev;
++ const char *name;
++ char *id;
++ int type;
++};
++
++struct cs3 cs3 ={
++ .name = "latch_cs3",
++};
++
++static ssize_t get_VCC_5V_EN (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & VCC_5V_EN )
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_VCC_3V_EN (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & VCC_3V_EN)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_EN1 (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & EN1)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_EN0 (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & EN0)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_DISPLAY_ON (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & DISPLAY_ON)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_PCMCIA_BUFF_DIS (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & PCMCIA_BUFF_DIS)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_MQ_RESET (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & MQ_RESET)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_PCMCIA_RESET (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & PCMCIA_RESET)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_DECT_POWER_ON (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & DECT_POWER_ON)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_IRDA_SD (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & IRDA_SD)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_RS232_ON (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & RS232_ON)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_SD_MEDIAQ (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & SD_MEDIAQ)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_LED2_ON (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & LED2_ON)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_IRDA_MODE (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & IRDA_MODE)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_ENABLE_5V (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & ENABLE_5V)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++static ssize_t get_RESET_SIMCARD (struct class_device *class_dev, char *buf) {
++ if (get_cs3_shadow() & RESET_SIMCARD)
++ return sprintf(buf, "1\n");
++ else
++ return sprintf(buf, "0\n");
++}
++
++
++static ssize_t write_DISPLAY_ON (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(DISPLAY_ON);
++ else if (val=='0')
++ clear_cs3_bit(DISPLAY_ON);
++ return strlen(buf);
++}
++
++static ssize_t write_DECT_POWER_ON (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(DECT_POWER_ON);
++ else if (val=='0')
++ clear_cs3_bit(DECT_POWER_ON);
++ return strlen(buf);
++}
++
++static ssize_t write_IRDA_SD (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(IRDA_SD);
++ else if (val=='0')
++ clear_cs3_bit(IRDA_SD);
++ return strlen(buf);
++}
++
++static ssize_t write_SD_MEDIAQ (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(SD_MEDIAQ);
++ else if (val=='0')
++ clear_cs3_bit(SD_MEDIAQ);
++ return strlen(buf);
++}
++
++static ssize_t write_LED2_ON (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(LED2_ON);
++ else if (val=='0')
++ clear_cs3_bit(LED2_ON);
++ return strlen(buf);
++}
++
++static ssize_t write_IRDA_MODE (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(IRDA_MODE);
++ else if (val=='0')
++ clear_cs3_bit(IRDA_MODE);
++ return strlen(buf);
++}
++
++static ssize_t write_RESET_SIMCARD (struct class_device *cdev, const char * buf, size_t count){
++ char val;
++ if (sscanf(buf, "%c",&val) !=1)
++ return -EINVAL;
++ if (val=='1')
++ set_cs3_bit(RESET_SIMCARD);
++ else if (val=='0')
++ clear_cs3_bit(RESET_SIMCARD);
++ return strlen(buf);
++}
++
++static CLASS_DEVICE_ATTR(vcc_5v_en, 0444, get_VCC_5V_EN, NULL);
++static CLASS_DEVICE_ATTR(vcc_3v_en, 0444, get_VCC_3V_EN, NULL);
++static CLASS_DEVICE_ATTR(en1, 0444, get_EN1, NULL);
++static CLASS_DEVICE_ATTR(en0, 0444, get_EN0, NULL);
++static CLASS_DEVICE_ATTR(display_on, 0664, get_DISPLAY_ON, write_DISPLAY_ON);
++static CLASS_DEVICE_ATTR(pcmcia_buff_dis, 0444, get_PCMCIA_BUFF_DIS, NULL);
++static CLASS_DEVICE_ATTR(mq_reset, 0444, get_MQ_RESET, NULL);
++static CLASS_DEVICE_ATTR(pcmcia_reset, 0444, get_PCMCIA_RESET, NULL);
++static CLASS_DEVICE_ATTR(dect_power_on, 0664, get_DECT_POWER_ON, write_DECT_POWER_ON);
++static CLASS_DEVICE_ATTR(irda_sd, 0664, get_IRDA_SD, write_IRDA_SD);
++static CLASS_DEVICE_ATTR(rs232_on, 0444, get_RS232_ON, NULL);
++static CLASS_DEVICE_ATTR(sd_mediaq, 0664, get_SD_MEDIAQ, write_SD_MEDIAQ);
++static CLASS_DEVICE_ATTR(led2_on, 0664, get_LED2_ON, write_LED2_ON);
++static CLASS_DEVICE_ATTR(irda_mode, 0664, get_IRDA_MODE, write_IRDA_MODE);
++static CLASS_DEVICE_ATTR(enable_5v, 0444, get_ENABLE_5V, NULL);
++static CLASS_DEVICE_ATTR(reset_simcard, 0664, get_RESET_SIMCARD, write_RESET_SIMCARD);
++
++static struct class simpad_gpios_class = {
++ .name = "simpad"
++};
++
++#define create_entry_conditional(name) \
++ rc = class_device_create_file(&cs3->class_dev, &class_device_attr_##name); \
++ if (rc) goto out; \
++
++static int register_cs3_latch(struct cs3 *cs3){
++ int rc = 0;
++ cs3->class_dev.class = &simpad_gpios_class;
++ strcpy(cs3->class_dev.class_id, cs3->name);
++ rc = class_device_register(&cs3->class_dev);
++ if(rc)
++ goto out;
++
++ create_entry_conditional(vcc_5v_en);
++ create_entry_conditional(vcc_3v_en);
++ create_entry_conditional(en1);
++ create_entry_conditional(en0);
++ create_entry_conditional(display_on);
++ create_entry_conditional(pcmcia_buff_dis);
++ create_entry_conditional(mq_reset);
++ create_entry_conditional(pcmcia_reset);
++ create_entry_conditional(dect_power_on);
++ create_entry_conditional(irda_sd);
++ create_entry_conditional(rs232_on);
++ create_entry_conditional(sd_mediaq);
++ create_entry_conditional(led2_on);
++ create_entry_conditional(irda_mode);
++ create_entry_conditional(enable_5v);
++ create_entry_conditional(reset_simcard);
++
++out:
++ return rc;
++}
++
++static int __init simpad_gpios_class_init(void)
++{
++ if (class_register(&simpad_gpios_class) != 0)
++ printk(KERN_ERR "cs3 latch class failed "
++ "to register properly\n");
++ register_cs3_latch(&cs3);
++ return 0;
++}
++
++static void __exit simpad_gpios_class_exit(void)
++{
++ class_unregister(&simpad_gpios_class);
++}
++
++module_init(simpad_gpios_class_init);
++module_exit(simpad_gpios_class_exit);
++
++MODULE_DESCRIPTION("CS3_latch driver");
++MODULE_AUTHOR("Bernhard Guillon");
++MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch
new file mode 100644
index 0000000000..5726779ad6
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch
@@ -0,0 +1,2511 @@
+diff -uNr linux-2.6.21.vanilla/drivers/video/Kconfig linux-2.6.21/drivers/video/Kconfig
+--- linux-2.6.21.vanilla/drivers/video/Kconfig 2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/Kconfig 2007-05-01 17:02:17.000000000 +0200
+@@ -139,7 +139,7 @@
+ This is particularly important to one driver, matroxfb. If
+ unsure, say N.
+
+-comment "Frame buffer hardware drivers"
++comment "Frambuffer hardware drivers"
+ depends on FB
+
+ config FB_CIRRUS
+@@ -1120,6 +1120,15 @@
+ ---help---
+ Driver for graphics boards with S3 Trio / S3 Virge chip.
+
++config FB_MQ200
++ bool "MQ200 Driver"
++ depends on (FB = y) && ARM && ARCH_SA1100
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ help
++ This is a MQ200 driver tested only on Siemens SIMpads.
++
+ config FB_SAVAGE
+ tristate "S3 Savage support"
+ depends on FB && PCI && EXPERIMENTAL
+diff -uNr linux-2.6.21.vanilla/drivers/video/Makefile linux-2.6.21/drivers/video/Makefile
+--- linux-2.6.21.vanilla/drivers/video/Makefile 2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/Makefile 2007-05-01 17:02:17.000000000 +0200
+@@ -29,6 +29,7 @@
+ obj-$(CONFIG_FB_PM2) += pm2fb.o
+ obj-$(CONFIG_FB_PM3) += pm3fb.o
+
++obj-$(CONFIG_FB_MQ200) += mq200/
+ obj-$(CONFIG_FB_MATROX) += matrox/
+ obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o
+ obj-$(CONFIG_FB_NVIDIA) += nvidia/
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/Kconfig linux-2.6.21/drivers/video/backlight/Kconfig
+--- linux-2.6.21.vanilla/drivers/video/backlight/Kconfig 2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/backlight/Kconfig 2007-05-01 17:02:17.000000000 +0200
+@@ -63,3 +63,20 @@
+ help
+ If you have a Frontpath ProGear say Y to enable the
+ backlight driver.
++
++config BACKLIGHT_SIMPAD
++ tristate "SIMpad MQ200 Backlight driver"
++ depends on SA1100_SIMPAD && BACKLIGHT_CLASS_DEVICE
++ default y
++ help
++ If you have a Siemens SIMpad say Y to enable the
++ backlight driver.
++
++config LCD_SIMPAD
++ tristate "SIMpad MQ200 LCD driver"
++ depends on SA1100_SIMPAD && LCD_CLASS_DEVICE
++ default y
++ help
++ If you have a Siemens SIMpad say Y to enable the
++ LCD driver.
++
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/Makefile linux-2.6.21/drivers/video/backlight/Makefile
+--- linux-2.6.21.vanilla/drivers/video/backlight/Makefile 2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/backlight/Makefile 2007-05-01 17:02:17.000000000 +0200
+@@ -6,3 +6,5 @@
+ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
+ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
++obj-$(CONFIG_BACKLIGHT_SIMPAD) += simpad_bl.o
++obj-$(CONFIG_LCD_SIMPAD) += simpad_lcd.o
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/simpad_bl.c linux-2.6.21/drivers/video/backlight/simpad_bl.c
+--- linux-2.6.21.vanilla/drivers/video/backlight/simpad_bl.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/backlight/simpad_bl.c 2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,208 @@
++/*
++ * GPLv2 <zecke@handhelds.org
++ *
++ * Implementation of the backlight_driver for
++ * the mq200 framebuffer
++ *
++ * 2007/03/17 mrdata:
++ * - small changes simpad_bl_get_brightness()
++ * simpad_bl_set_brightness()
++ * - new function simpad_bl_update_status()
++ * - changed struct backlight_properties simpad_bl_props()
++ * to new one
++ * - changed __init simpad_bl_init() -> backlight_device_register
++ *
++ * 2007/03/24 mrdata
++ * - added .brightness=127 in
++ * struct backlight_properties simpad_bl_props()
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++
++#include <asm/types.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#include "../mq200/mq200_data.h"
++
++#define SIMPAD_BACKLIGHT_MASK 0x00a10044
++#define SIMPAD_DEFAULT_INTENSITY 127
++#define SIMPAD_MAX_INTENSITY 254
++#define REGISTER_BASE 0xf2e00000
++
++static int simpad_bl_suspended;
++static int current_intensity = 0;
++
++static void simpad_bl_send_intensity(struct backlight_device *bd)
++{
++ int intensity = bd->props.brightness;
++
++ union fp0fr fp0fr;
++ unsigned long dutyCycle, pwmcontrol;
++
++ if (intensity > SIMPAD_MAX_INTENSITY)
++ intensity = SIMPAD_MAX_INTENSITY;
++
++ if (bd->props.power != FB_BLANK_UNBLANK)
++ intensity = 0;
++
++ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++ intensity = 0;
++
++ if (simpad_bl_suspended)
++ intensity = 0;
++
++ if (intensity != current_intensity)
++ {
++ /*
++ * Determine dutyCycle.
++ * Note: the lower the value, the brighter the display!
++ */
++
++ dutyCycle = SIMPAD_MAX_INTENSITY - intensity;
++
++ /*
++ * Configure PWM0 (source clock = oscillator clock, pwm always enabled,
++ * zero, clock pre-divider = 4) pwm frequency = 12.0kHz
++ */
++
++ fp0fr.whole = readl(FP0FR(REGISTER_BASE));
++ pwmcontrol = fp0fr.whole & 0xffff00ff;
++ fp0fr.whole &= 0xffffff00;
++ fp0fr.whole |= 0x00000044;
++ writel(fp0fr.whole, FP0FR(REGISTER_BASE));
++
++ /* Write to pwm duty cycle register. */
++ fp0fr.whole = dutyCycle << 8;
++ fp0fr.whole &= 0x0000ff00;
++ fp0fr.whole |= pwmcontrol;
++ writel(fp0fr.whole, FP0FR(REGISTER_BASE));
++
++ current_intensity = intensity;
++ }
++}
++
++
++#ifdef CONFIG_PM
++static int simpad_bl_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ simpad_bl_suspended = 1;
++ simpad_bl_send_intensity(bd);
++ return 0;
++}
++
++static int simpad_bl_resume(struct platform_device *pdev)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ simpad_bl_suspended = 0;
++ simpad_bl_send_intensity(bd);
++ return 0;
++}
++#else
++#define simpad_bl_suspend NULL
++#define simpad_bl_resume NULL
++#endif
++
++
++static int simpad_bl_set_intensity(struct backlight_device *bd)
++{
++ simpad_bl_send_intensity(bd);
++ return 0;
++}
++
++
++static int simpad_bl_get_intensity(struct backlight_device *bd)
++{
++ return current_intensity;
++}
++
++
++static struct backlight_ops simpad_bl_ops = {
++ .get_brightness = simpad_bl_get_intensity,
++ .update_status = simpad_bl_set_intensity,
++};
++
++
++static int __init simpad_bl_probe(struct platform_device *pdev)
++{
++ struct backlight_device *bd;
++
++ bd = backlight_device_register("simpad-mq200-bl", &pdev->dev, NULL, &simpad_bl_ops);
++
++ if (IS_ERR (bd))
++ return PTR_ERR (bd);
++
++ platform_set_drvdata(pdev, bd);
++
++ bd->props.max_brightness = SIMPAD_MAX_INTENSITY;
++ bd->props.brightness = SIMPAD_DEFAULT_INTENSITY;
++ simpad_bl_send_intensity(bd);
++
++ return 0;
++}
++
++
++static int simpad_bl_remove(struct platform_device *pdev)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ bd->props.brightness = 0;
++ bd->props.power = 0;
++ simpad_bl_send_intensity(bd);
++
++ backlight_device_unregister(bd);
++
++ return 0;
++}
++
++static struct platform_driver simpad_bl_driver = {
++ .probe = simpad_bl_probe,
++ .remove = simpad_bl_remove,
++ .suspend = simpad_bl_suspend,
++ .resume = simpad_bl_resume,
++ .driver = {
++ .name = "simpad-mq200-bl",
++ },
++};
++
++static struct platform_device *simpad_bl_device = NULL;
++
++static int __init simpad_bl_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&simpad_bl_driver);
++ if (!ret) {
++ simpad_bl_device = platform_device_alloc("simpad-mq200-bl", -1);
++ if (!simpad_bl_device)
++ return -ENOMEM;
++
++ ret = platform_device_add(simpad_bl_device);
++
++ if (ret) {
++ platform_device_put(simpad_bl_device);
++ platform_driver_unregister(&simpad_bl_driver);
++ }
++ }
++ return ret;
++}
++
++static void __exit simpad_bl_exit(void)
++{
++ platform_device_unregister(simpad_bl_device);
++ platform_driver_unregister(&simpad_bl_driver);
++}
++
++
++module_init(simpad_bl_init);
++module_exit(simpad_bl_exit);
++MODULE_AUTHOR("Holger Hans Peter Freyther");
++MODULE_LICENSE("GPL");
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/simpad_lcd.c linux-2.6.21/drivers/video/backlight/simpad_lcd.c
+--- linux-2.6.21.vanilla/drivers/video/backlight/simpad_lcd.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/backlight/simpad_lcd.c 2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,170 @@
++/*
++ * GPLv2 <zecke@handhelds.org
++ *
++ * Implementation of the lcd_driver for the mq200 framebuffer
++ *
++ * 2007/03/24 mrdata:
++ * - added simpad_lcd_get_contrast()
++ * - added simpad_lcd_set_contrast()
++ * - modify struct lcd_properties simpad_lcd_props
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++#include <linux/lcd.h>
++
++#include <asm/arch/simpad.h>
++#include <asm/hardware.h>
++
++extern long get_cs3_shadow(void);
++extern void set_cs3_bit(int);
++extern void clear_cs3_bit(int);
++
++#define UNUSED(x) x=x
++
++static int simpad_lcd_get_power(struct lcd_device* dev)
++{
++ UNUSED(dev);
++
++ return (get_cs3_shadow() & DISPLAY_ON) ? 0 : 4;
++}
++
++static int simpad_lcd_set_power(struct lcd_device* dev, int power)
++{
++ UNUSED(dev);
++
++ if( power == 4 )
++ clear_cs3_bit(DISPLAY_ON);
++ else
++ set_cs3_bit(DISPLAY_ON);
++
++ return 0;
++}
++
++static int simpad_lcd_get_contrast(struct lcd_device* dev)
++{
++ UNUSED(dev);
++
++ return 0;
++}
++
++static int simpad_lcd_set_contrast(struct lcd_device* dev, int contrast)
++{
++ UNUSED(dev);
++
++ UNUSED(contrast);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int simpad_lcd_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ UNUSED(state);
++ static int ret;
++
++ struct lcd_device* ld;
++
++ ld = platform_get_drvdata(pdev);
++
++ ret = simpad_lcd_set_power(ld, 4);
++
++ return ret;
++}
++
++static int simpad_lcd_resume(struct platform_device *pdev)
++{
++ struct lcd_device *ld;
++ static int ret;
++
++ ld = platform_get_drvdata(pdev);
++
++ ret = simpad_lcd_set_power(ld, 0);
++
++ return ret;
++}
++#else
++#define simpad_lcd_suspend NULL
++#define simpad_lcd_resume NULL
++#endif
++
++static struct lcd_properties simpad_lcd_props = {
++ .max_contrast = 0,
++};
++
++
++static struct lcd_ops simpad_lcd_ops = {
++ .get_power = simpad_lcd_get_power,
++ .set_power = simpad_lcd_set_power,
++ .get_contrast = simpad_lcd_get_contrast,
++ .set_contrast = simpad_lcd_set_contrast,
++};
++
++static int __init simpad_lcd_probe(struct platform_device *pdev)
++{
++ struct lcd_device *ld;
++
++ ld = lcd_device_register ("simpad-mq200-lcd", &pdev->dev, &simpad_lcd_ops);
++
++ if (IS_ERR(ld))
++ return PTR_ERR(ld);
++
++ platform_set_drvdata(pdev, ld);
++
++ ld->props.max_contrast = 0;
++
++ return 0;
++}
++
++static int simpad_lcd_remove(struct platform_device *pdev)
++{
++ struct lcd_device *ld = platform_get_drvdata(pdev);
++
++ lcd_device_unregister(ld);
++
++ return 0;
++}
++
++static struct platform_driver simpad_lcd_driver = {
++ .probe = simpad_lcd_probe,
++ .remove = simpad_lcd_remove,
++ .suspend = simpad_lcd_suspend,
++ .resume = simpad_lcd_resume,
++ .driver = {
++ .name = "simpad-mq200-lcd",
++ },
++};
++
++static struct platform_device *simpad_lcd_device = NULL;
++
++static int __init simpad_lcd_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&simpad_lcd_driver);
++ if (!ret) {
++ simpad_lcd_device = platform_device_alloc("simpad-mq200-lcd", -1);
++ if (!simpad_lcd_device)
++ return -ENOMEM;
++
++ ret = platform_device_add(simpad_lcd_device);
++
++ if (ret) {
++ platform_device_put(simpad_lcd_device);
++ platform_driver_unregister(&simpad_lcd_driver);
++ }
++ }
++ return ret;
++}
++
++static void __exit simpad_lcd_exit(void) {
++ platform_driver_unregister(&simpad_lcd_driver);
++ platform_device_unregister(simpad_lcd_device);
++}
++
++module_init(simpad_lcd_init);
++module_exit(simpad_lcd_exit);
++MODULE_AUTHOR("Holger Hans Peter Freyther");
++MODULE_LICENSE("GPL");
+diff -uNr linux-2.6.21.vanilla/drivers/video/mq200/Makefile linux-2.6.21/drivers/video/mq200/Makefile
+--- linux-2.6.21.vanilla/drivers/video/mq200/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/mq200/Makefile 2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,6 @@
++# Makefile for mq200 video driver
++# 4 Aug 2003, Holger Hans Peter Freyther
++#
++
++obj-$(CONFIG_FB_MQ200) += mq_skeleton.o mq_external.o
++
+diff -uNr linux-2.6.21.vanilla/drivers/video/mq200/mq200_data.h linux-2.6.21/drivers/video/mq200/mq200_data.h
+--- linux-2.6.21.vanilla/drivers/video/mq200/mq200_data.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/mq200/mq200_data.h 2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,1120 @@
++/*
++ * From ucLinux mq200fb.c and mq200fb.h
++ *
++ * 2007/03/11 mrdata:
++ * insert registers for graphics controller 2 module
++ */
++
++#ifndef __MQ200_FB_H__
++#define __MQ200_FB_H__
++
++struct mq200_io_regions {
++ u32 fb_size; /* framebuffer size */
++ unsigned long phys_mmio_base; /* physical register memory base */
++ unsigned long virt_mmio_base; /* virtual start of registers */
++ unsigned long phys_fb_base; /* physical address of frame buffer */
++ unsigned long virt_fb_base; /* virtual start of the framebuffer */
++};
++
++#define MQ200_MONITOR_HORI_RES(info) info->monitor_info.horizontal_res
++#define MQ200_MONITOR_VERT_RES(info) info->monitor_info.vertical_res
++#define MQ200_MONITOR_DEPTH(info) info->monitor_info.depth
++#define MQ200_MONITOR_LINE_LENGTH(info) info->monitor_info.line_length
++
++struct mq200_monitor_info {
++ unsigned int horizontal_res;
++ unsigned int vertical_res;
++ unsigned int depth;
++ unsigned int refresh;
++ unsigned int line_length;
++ unsigned long flags;
++};
++
++
++/**
++ * Addresses of Module
++ */
++#define MQ200_FB_BASE (x) (x + 0x1800000) /* framebuffer */
++#define MQ200_FB_SIZE 0x200000 /* framebuffer size in bytes */
++#define MQ200_REGS_BASE(x) (x + 0x1e00000) /* start of registers area */
++#define MQ200_REGS_SIZE 0x200000 /* registers area size */
++
++#define PMU_OFFSET 0x00000 /* power management */
++#define CPU_OFFSET 0x02000 /* CPU interface */
++#define MIU_OFFSET 0x04000 /* memory controller */
++#define IN_OFFSET 0x08000 /* interrupt controller */
++#define GC_OFFSET 0x0a000 /* graphics controller 1&2 */
++#define GE_OFFSET 0x0c000 /* graphics engine */
++#define FPI_OFFSET 0x0e000 /* flat panel controller */
++#define CP1_OFFSET 0x10000 /* color palette 1 */
++#define DC_OFFSET 0x14000 /* device configuration */
++#define PCI_OFFSET 0x16000 /* PCI configuration */
++#define PSF_OFFSET 0x18000 /* ??? */
++
++
++/****
++ * Registers
++ */
++
++/* power management unit */
++#define PMR(addr) (addr + PCI_OFFSET + 0x40)/* power management
++ register */
++#define PMR_VALUE 0x06210001 /* expected read value of PMR register */
++#define PM00R(addr) (addr + PMU_OFFSET + 0x00) /* power management unit
++ configuration
++ register */
++#define PM01R(addr) (addr + PMU_OFFSET + 0x04) /* D1 state control */
++#define PM02R(addr) (addr + PMU_OFFSET + 0x08) /* d2 state control */
++#define PM06R(addr) (addr + PMU_OFFSET + 0x18) /* PLL 2 programming */
++#define PM07R(addr) (addr + PMU_OFFSET + 0x1c) /* PLL 3 programming */
++
++#define PMCSR(addr) (addr + PCI_OFFSET + 0x44) /* power management
++ control/status
++ register */
++
++/* memory interface unit */
++#define MM00R(addr) (addr + MIU_OFFSET + 0x00)/* MIU interface control
++ 0 */
++#define MM01R(addr) (addr + MIU_OFFSET + 0x04) /* MIU interface control
++ 1 */
++#define MM02R(addr) (addr + MIU_OFFSET + 0x08) /* memory interface
++ control 2 */
++#define MM03R(addr) (addr + MIU_OFFSET + 0x0c) /* memory interface
++ control 3 */
++#define MM04R(addr) (addr + MIU_OFFSET + 0x10) /* memory interface
++ control 4 */
++/* graphics controller 1 module */
++#define GC00R(addr) (addr + GC_OFFSET + 0x00) /* graphics controller 1
++ control */
++#define GC01R(addr) (addr + GC_OFFSET + 0x04) /* graphics controller
++ CRT control */
++#define GC02R(addr) (addr + GC_OFFSET + 0x08) /* horizontal display 1
++ control */
++#define GC03R(addr) (addr + GC_OFFSET + 0x0c) /* vertical display 1
++ control */
++#define GC04R(addr) (addr + GC_OFFSET + 0x10) /* horizontal sync 1
++ control */
++#define GC05R(addr) (addr + GC_OFFSET + 0x14) /* vertical sync 1
++ control */
++#define GC07R(addr) (addr + GC_OFFSET + 0x1c) /* vertical display 1
++ count */
++#define GC08R(addr) (addr + GC_OFFSET + 0x20) /* horizontal window 1
++ control */
++#define GC09R(addr) (addr + GC_OFFSET + 0x24) /* vertical window 1
++ control */
++#define GC0AR(addr) (addr + GC_OFFSET + 0x28) /* alternate horizontal
++ window 1 control */
++#define GC0BR(addr) (addr + GC_OFFSET + 0x2c) /* alternate vertical
++ window 1 control */
++#define GC0CR(addr) (addr + GC_OFFSET + 0x30) /* window 1
++ start address */
++#define GC0DR(addr) (addr + GC_OFFSET + 0x34) /* alternate window 1
++ start address */
++#define GC0ER(addr) (addr + GC_OFFSET + 0x38) /* alternate window 1
++ stride */
++#define GC0FR(addr) (addr + GC_OFFSET + 0x3c) /* alternate window 1
++ line size */
++#define GC10R(addr) (addr + GC_OFFSET + 0x40) /* hardware cursor 1
++ position */
++#define GC11R(addr) (addr + GC_OFFSET + 0x44) /* hardware cursor 1
++ start address and
++ offset */
++#define GC12R(addr) (addr + GC_OFFSET + 0x48) /* hardware cursor 1
++ foreground color */
++#define GC13R(addr) (addr + GC_OFFSET + 0x4c) /* hardware cursor 1
++ background color */
++
++/* graphics controller 2 module */
++#define GC20R(addr) (addr + GC_OFFSET + 0x80) /* graphics controller 2
++ control */
++#define GC21R(addr) (addr + GC_OFFSET + 0x84) /* graphics controller
++ CRC control */
++#define GC22R(addr) (addr + GC_OFFSET + 0x88) /* horizontal display 2
++ control */
++#define GC23R(addr) (addr + GC_OFFSET + 0x8c) /* vertical display 2
++ control */
++#define GC24R(addr) (addr + GC_OFFSET + 0x90) /* horizontal sync 2
++ control */
++#define GC25R(addr) (addr + GC_OFFSET + 0x94) /* vertical sync 2
++ control */
++#define GC27R(addr) (addr + GC_OFFSET + 0x9c) /* vertical display 2
++ count */
++#define GC28R(addr) (addr + GC_OFFSET + 0xa0) /* horizontal window 2
++ control */
++#define GC29R(addr) (addr + GC_OFFSET + 0xa4) /* vertical window 2
++ control */
++#define GC2AR(addr) (addr + GC_OFFSET + 0xa8) /* alternate horizontal
++ window 2 control */
++#define GC2BR(addr) (addr + GC_OFFSET + 0xac) /* alternate vertical
++ window 2 control */
++#define GC2CR(addr) (addr + GC_OFFSET + 0xb0) /* window 2
++ start address */
++#define GC2DR(addr) (addr + GC_OFFSET + 0xb4) /* alternate window 2
++ start address */
++#define GC2ER(addr) (addr + GC_OFFSET + 0xb8) /* alternate window 2
++ stride */
++#define GC2FR(addr) (addr + GC_OFFSET + 0xbc) /* alternate window 2
++ line size */
++#define GC30R(addr) (addr + GC_OFFSET + 0xc0) /* hardware cursor 2
++ position */
++#define GC31R(addr) (addr + GC_OFFSET + 0xc4) /* hardware cursor 2
++ start address and
++ offset */
++#define GC32R(addr) (addr + GC_OFFSET + 0xc8) /* hardware cursor 2
++ foreground color */
++#define GC33R(addr) (addr + GC_OFFSET + 0xcc) /* hardware cursor 2
++ background color */
++
++/* graphics engine */
++#define ROP_SRCCOPY 0xCC /* dest = source */
++#define ROP_SRCPAINT 0xEE /* dest = source OR dest */
++#define ROP_SRCAND 0x88 /* dest = source AND dest */
++#define ROP_SRCINVERT 0x66 /* dest = source XOR dest */
++#define ROP_SRCERASE 0x44 /* dest = source AND (NOT dest) */
++#define ROP_NOTSRCCOPY 0x33 /* dest = NOT source */
++#define ROP_NOTSRCERASE 0x11 /* dest = (NOT source) AND (NOT dest) */
++#define ROP_MERGECOPY 0xC0 /* dest = source AND pattern */
++#define ROP_MERGEPAINT 0xBB /* dest = (NOT source) OR dest */
++#define ROP_PATCOPY 0xF0 /* dest = pattern */
++#define ROP_PATPAINT 0xFB /* dest = DPSnoo */
++#define ROP_PATINVERT 0x5A /* dest = pattern XOR dest */
++#define ROP_DSTINVERT 0x55 /* dest = NOT dest */
++#define ROP_BLACKNESS 0x00 /* dest = BLACK */
++#define ROP_WHITENESS 0xFF /* dest = WHITE */
++
++#define GE00R(addr) (addr + GE_OFFSET + 0x00) /* primary drawing command
++ register */
++#define GE01R(addr) (addr + GE_OFFSET + 0x04) /* primary width and
++ height register */
++#define GE02R(addr) (addr + GE_OFFSET + 0x08) /* primary destination
++ address register */
++#define GE03R(addr) (addr + GE_OFFSET + 0x0c) /* primary source XY
++ register */
++#define GE04R(addr) (addr + GE_OFFSET + 0x10) /* primary color compare
++ register */
++#define GE05R(addr) (addr + GE_OFFSET + 0x14) /* primary clip left/top
++ register */
++#define GE06R(addr) (addr + GE_OFFSET + 0x18) /* primary clip
++ right/bottom register
++ */
++#define GE07R(addr) (addr + GE_OFFSET + 0x1c) /* primary source and
++ pattern offset
++ register */
++#define GE08R(addr) (addr + GE_OFFSET + 0x20) /* primary foreground
++ color
++ register/rectangle
++ fill register */
++#define GE09R(addr) (addr + GE_OFFSET + 0x24) /* source stride/offset
++ register */
++#define GE0AR(addr) (addr + GE_OFFSET + 0x28) /* destination stride
++ register and color
++ depth */
++#define GE0BR(addr) (addr + GE_OFFSET + 0x2c) /* image base address
++ register */
++#define GE40R(addr) (addr + GE_OFFSET + 0x100) /* mono pattern register
++ 0 */
++#define GE41R(addr) (addr + GE_OFFSET + 0x104) /* mono pattern register
++ 1 */
++#define GE42R(addr) (addr + GE_OFFSET + 0x108) /* foreground color
++ register */
++#define GE43R(addr) (addr + GE_OFFSET + 0x10c) /* background color
++ register */
++/* color palette */
++#define C1xxR(addr, regno) \
++ (addr + CP1_OFFSET + (regno) * 4) /* graphics controller color
++ palette 1 */
++/* device configuration */
++#define DC00R(addr) (addr + DC_OFFSET + 0x00) /* device configuration
++ register 0 */
++#define DC_RESET 0x4000
++/* PCI configuration space */
++#define PC00R(addr) (addr + PCI_OFFSET + 0x00)/* device ID/vendor ID
++ register */
++/* Flatpanel Control */
++#define FP00R(addr) (addr + FPI_OFFSET + 0x00) /* Flat Panel Control 0 */
++#define FP01R(addr) (addr + FPI_OFFSET + 0x04) /* Flat Panel Output Pin */
++#define FP02R(addr) (addr + FPI_OFFSET + 0x08) /* Flat Panel Gener Purpose
++ Outout Control Register */
++#define FP03R(addr) (addr + FPI_OFFSET + 0x0c) /* General Purpose I/O Port
++ Control Register */
++#define FP04R(addr) (addr + FPI_OFFSET + 0x10) /* STN Panel Control Register */
++#define FP05R(addr) (addr + FPI_OFFSET + 0x14) /* D-STN Half Frame Buffer
++ Control Register -By Guess */
++#define FP0FR(addr) (addr + FPI_OFFSET + 0x3c) /* Pulse Width Modulation
++ Control Register */
++#define FRCTL_PATTERN_COUNT 32
++#define FP10R(addr) (addr + FPI_OFFSET + 0x40) /* Frame-Rate Control Pattern
++ Register */
++#define FP11R(addr) (addr + FPI_OFFSET + 0x44)
++#define FP2FR(addr) (addr + FPI_OFFSET + 0xc0) /* Frame-Rate Control Weight
++ Registers */
++
++
++
++
++/* power management miscellaneous control */
++union pm00r {
++ struct {
++ u32 pll1_n_b5 :1; /* PLL 1 N parameter bit 5 is 0 */
++ u32 reserved_1 :1;
++ u32 pll2_enbl :1; /* PLL 2 enable */
++ u32 pll3_enbl :1; /* PLL 3 enable */
++ u32 reserved_2 :1;
++ u32 pwr_st_ctrl :1; /* power state status control */
++ u32 reserved_3 :2;
++
++ u32 ge_enbl :1; /* graphics engine enable */
++ u32 ge_bsy_gl :1; /* graphics engine force busy (global) */
++ u32 ge_bsy_lcl :1; /* graphics engine force busy (local) */
++ u32 ge_clock :2; /* graphics engine clock select */
++ u32 ge_cmd_fifo :1; /* graphics engine command FIFO reset */
++ u32 ge_src_fifo :1; /* graphics engine CPU source FIFO reset */
++ u32 miu_pwr_seq :1; /* memory interface unit power sequencing
++ enable */
++
++ u32 d3_mem_rfsh :1; /* D3 memory refresh */
++ u32 d4_mem_rfsh :1; /* D4 memory refresh */
++ u32 gpwr_intrvl :2; /* general power sequencing interval */
++ u32 fppwr_intrvl:2; /* flat panel power sequencing interval */
++ u32 gpwr_seq_ctr:1; /* general power sequencing interval control */
++ u32 pmu_tm :1; /* PMU test mode */
++
++ u32 pwr_state :2; /* power state (read only) */
++ u32 pwr_seq_st :1; /* power sequencing active status (read
++ only) */
++ u32 reserved_4 :5;
++ } part;
++ u32 whole;
++};
++
++/* D1 state control */
++union pm01r {
++ struct {
++ u32 osc_enbl :1; /* D1 oscillator enable */
++ u32 pll1_enbl :1; /* D1 PLL 1 enable */
++ u32 pll2_enbl :1; /* D1 PLL 2 enable */
++ u32 pll3_enbl :1; /* D1 PLL 3 enable */
++ u32 miu_enbl :1; /* D1 Memory Interface Unit (MIU) enable */
++ u32 mem_rfsh :1; /* D1 memory refresh enable */
++ u32 ge_enbl :1; /* D1 Graphics Engine (GE) enable */
++ u32 reserved_1 :1;
++
++ u32 crt_enbl :1; /* D1 CRT enable */
++ u32 fpd_enbl :1; /* D1 Flat Panel enable */
++ u32 reserved_2 :6;
++
++ u32 ctl1_enbl :1; /* D1 controller 1 enable */
++ u32 win1_enbl :1; /* D1 window 1 enable */
++ u32 awin1_enbl :1; /* D1 alternate window 1 enable */
++ u32 cur1_enbl :1; /* D1 cursor 1 enable */
++ u32 reserved_3 :4;
++
++ u32 ctl2_enbl :1; /* D1 controller 2 enable */
++ u32 win2_enbl :1; /* D1 window 2 enable */
++ u32 awin2_enbl :1; /* D1 alternate window 2 enable */
++ u32 cur2_enbl :1; /* D1 cursor 2 enable */
++ u32 reserved_4 :4;
++ } part;
++ u32 whole;
++};
++
++/* D2 state control */
++union pm02r {
++ struct {
++ u32 osc_enbl :1; /* D2 oscillator enable */
++ u32 pll1_enbl :1; /* D2 PLL 1 enable */
++ u32 pll2_enbl :1; /* D2 PLL 2 enable */
++ u32 pll3_enbl :1; /* D2 PLL 3 enable */
++ u32 miu_enbl :1; /* D2 Memory Interface Unit (MIU) enable */
++ u32 mem_rfsh :1; /* D2 memory refresh enable */
++ u32 ge_enbl :1; /* D2 Graphics Engine (GE) enable */
++ u32 reserved_1 :1;
++
++ u32 crt_enbl :1; /* D2 CRT enable */
++ u32 fpd_enbl :1; /* D2 Flat Panel enable */
++ u32 reserved_2 :6;
++
++ u32 ctl1_enbl :1; /* D2 controller 1 enable */
++ u32 win1_enbl :1; /* D2 window 1 enable */
++ u32 awin1_enbl :1; /* D2 alternate window 1 enable */
++ u32 cur1_enbl :1; /* D2 cursor 1 enable */
++ u32 reserved_3 :4;
++
++ u32 ctl2_enbl :1; /* D2 controller 2 enable */
++ u32 win2_enbl :1; /* D2 window 2 enable */
++ u32 awin2_enbl :1; /* D2 alternate window 2 enable */
++ u32 cur2_enbl :1; /* D2 cursor 2 enable */
++ u32 reserved_4 :4;
++ } part;
++ u32 whole;
++};
++
++/* PLL 2 programming */
++union pm06r {
++ struct {
++ u32 clk_src :1; /* PLL 2 reference clock source */
++ u32 bypass :1; /* PLL 2 bypass */
++ u32 reserved_1 :2;
++ u32 p_par :3; /* PLL 2 P parameter */
++ u32 reserved_2 :1;
++
++ u32 n_par :5; /* PLL 2 N parameter */
++ u32 reserved_3 :3;
++
++ u32 m_par :8; /* PLL 2 M parameter */
++
++ u32 reserved_4 :4;
++ u32 trim :4; /* PLL 2 trim value */
++ } part;
++ u32 whole;
++};
++
++/* PLL 3 programming */
++union pm07r {
++ struct {
++ u32 clk_src :1; /* PLL 3 reference clock source */
++ u32 bypass :1; /* PLL 3 bypass */
++ u32 reserved_1 :2;
++ u32 p_par :3; /* PLL 3 P parameter */
++ u32 reserved_2 :1;
++
++ u32 n_par :5; /* PLL 3 N parameter */
++ u32 reserved_3 :3;
++
++ u32 m_par :8; /* PLL 3 M parameter */
++
++ u32 reserved_4 :4;
++ u32 trim :4; /* PLL 3 trim value */
++ } part;
++ u32 whole;
++};
++
++
++
++/* MIU interface control 1 */
++union mm00r {
++ struct {
++ u32 miu_enbl :1; /* MIU enable bit */
++ u32 mr_dsbl :1; /* MIU reset disable bit */
++ u32 edr_dsbl :1; /* embedded DRAM reset disable bit */
++ u32 reserved_1 :29;
++ } part;
++ u32 whole;
++};
++
++/* MIU interface control 2 */
++union mm01r {
++ struct {
++ u32 mc_src :1; /* memory clock source */
++ u32 msr_enbl :1; /* memory slow refresh enable bit */
++ u32 pb_cpu :1; /* page break enable for CPU */
++ u32 pb_gc1 :1; /* page break enable for GC1 */
++ u32 pb_gc2 :1; /* page break enable for GC2 */
++ u32 pb_stn_r :1; /* page break enable for STN read */
++ u32 pb_stn_w :1; /* page break enable for STN write */
++ u32 pb_ge :1; /* page break enable for GE */
++ u32 reserved_1 :4;
++ u32 mr_interval :14; /* normal memory refresh time interval */
++ u32 reserved_2 :4;
++ u32 edarm_enbl :1; /* embedded DRAM auto-refresh mode enable */
++ u32 eds_enbl :1; /* EDRAM standby enable for EDRAM normal
++ mode operation */
++ } part;
++ u32 whole;
++};
++
++/* memory interface control 3 */
++union mm02r {
++ struct {
++ u32 bs_ :2;
++ u32 bs_stnr :2; /* burst count for STN read memory cycles */
++ u32 bs_stnw :2; /* burst count for STN write memroy cycles */
++ u32 bs_ge :2; /* burst count for graphics engine
++ read/write memroy cycles */
++ u32 bs_cpuw :2; /* burst count for CPU write memory cycles */
++ u32 fifo_gc1 :4; /* GC1 display refresh FIFO threshold */
++ u32 fifo_gc2 :4; /* GC2 display refresh FIFO threshold */
++ u32 fifo_stnr :4; /* STN read FIFO threshold */
++ u32 fifo_stnw :4; /* STN write FIFO threshold */
++ u32 fifo_ge_src :3; /* GE source read FIFO threshold */
++ u32 fifo_ge_dst :3; /* GE destination read FIFO threshold */
++ } part;
++ u32 whole;
++};
++
++/* memory interface control 4 */
++union mm03r {
++ struct {
++ u32 rd_late_req :1; /* read latency request */
++ u32 reserved_1 :31;
++ } part;
++ u32 whole;
++};
++
++/* memory interface control 5 */
++union mm04r {
++ struct {
++ u32 latency :3; /* EDRAM latency */
++ u32 dmm_cyc :1; /* enable for the dummy cycle insertion
++ between read and write cycles */
++ u32 pre_dmm_cyc :1; /* enable for the dummy cycle insertion
++ between read/write and precharge cycles
++ for the same bank */
++ u32 reserved_1 :3;
++ u32 bnk_act_cls :2; /* bank activate command to bank close
++ command timing interval control */
++ u32 bnk_act_rw :1; /* bank activate command to read/wirte
++ command timing interval control */
++ u32 bnk_cls_act :1; /* bank close command to bank activate
++ command timing interval control */
++ u32 trc :1; /* row cycle time */
++ u32 reserved_2 :3;
++ u32 delay_r :2; /* programmable delay for read clock */
++ u32 delay_m :2; /* programmable delay for internal memory
++ clock */
++ } part;
++ u32 whole;
++};
++
++/* graphics controller 1 register */
++union gc00r {
++ struct {
++ u32 ctl_enbl :1; /* Controller 1 Enable */
++ u32 hc_reset :1; /* Horizontal Counter 1 Reset */
++ u32 vc_reset :1; /* Vertical Counter 1 Reset */
++ u32 iwin_enbl :1; /* Image Window 1 Enable */
++ u32 gcd :4; /* Graphics Color Depth (GCD) */
++
++ u32 hc_enbl :1; /* Hardware Cursor 1 Enable */
++ u32 reserved_1 :2;
++ u32 aiwin_enbl :1; /* Alternate Image Window Enable */
++ u32 agcd :4; /* Alternate Graphics Color Depth (AGCD) */
++
++ u32 g1rclk_src :2; /* G1RCLK Source */
++ u32 tm0 :1; /* Test Mode 0 */
++ u32 tm1 :1; /* Test Mode 1 */
++ u32 fd :3; /* G1MCLK First Clock Divisor (FD1) */
++ u32 reserved_2 :1;
++
++ u32 sd :8; /* G1MCLK Second Clock Divisor (SD1) */
++ } part;
++ u32 whole;
++};
++
++/* graphics controller CRT control */
++union gc01r {
++ struct {
++ u32 dac_enbl :2; /* CRT DAC enable */
++ u32 hsync_out :1; /* CRT HSYNC output during power down mode */
++ u32 vsync_out :1; /* CRT VSYNC output during power down mode */
++ u32 hsync_ctl :2; /* CRT HSYNC control */
++ u32 vsync_ctl :2; /* CRT VSYNC control */
++ /**/
++ u32 hsync_pol :1; /* CRT HSYNC polarity */
++ u32 vsync_pol :1; /* CRT VSYNC polarity */
++ u32 sync_p_enbl :1; /* sync pedestal enable */
++ u32 blnk_p_enbl :1; /* blank pedestal enable */
++ u32 c_sync_enbl :1; /* composite sync enable */
++ u32 vref_sel :1; /* VREF select */
++ u32 mn_sns_enbl :1; /* monitor sense enable */
++ u32 ct_out_enbl :1; /* constant output enable */
++ /**/
++ u32 dac_out_lvl :8; /* monitor sense DAC output level */
++ /**/
++ u32 blue_dac_r :1; /* blue DAC sense result */
++ u32 green_dac_r :1; /* green DAC sense result */
++ u32 red_dac_r :1; /* red DAC sense result */
++ u32 reserved_1 :1;
++ u32 mon_col_sel :1; /* mono/color monitor select */
++ u32 reserved_2 :3;
++ } part;
++ u32 whole;
++};
++
++/* horizontal display 1 control */
++union gc02r {
++ struct {
++ u32 hd1t :12; /* horizontal display 1 total */
++ u32 reserved_1 :4;
++
++ u32 hd1e :12; /* horizontal display 1 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* vertical display 1 control */
++union gc03r {
++ struct {
++ u32 vd1t :12; /* vertical display 1 total */
++ u32 reserved_1 :4;
++
++ u32 vd1e :12; /* vertical display 1 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* horizontal sync 1 control */
++union gc04r {
++ struct {
++ u32 hs1s :12; /* horizontal sync 1 start */
++ u32 reserved_1 :4;
++
++ u32 hs1e :12; /* horizontal sync 1 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* vertical sync 1 control */
++union gc05r {
++ struct {
++ u32 vs1s :12; /* vertical sync 1 start */
++ u32 reserved_1 :4;
++
++ u32 vs1e :12; /* vertical sync 1 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* vertical display 1 count */
++union gc07r {
++ struct {
++ u32 vd_cnt :12; /* vertical display 1 count */
++ u32 reverved_1 :20;
++ } part;
++ u32 whole;
++};
++
++/* horizontal window 1 control */
++union gc08r {
++ struct {
++ u32 hw1s :12; /* horizontal window 1 start (HW1S) */
++ u32 reserved_1 :4;
++
++ u32 hw1w :12; /* horizontal window 1 width (HW1W) */
++ u32 w1ald :4; /* window 1 additional line data */
++ } part;
++ u32 whole;
++};
++
++/* vertical window 1 control */
++union gc09r {
++ struct {
++ u32 vw1s :12; /* vertical window 1 start */
++ u32 reserved_1 :4;
++ u32 vw1h :12; /* vertical window 1 height */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* window 1 start address */
++union gc0cr {
++ struct {
++ u32 w1sa :21; /* window 1 start address */
++ u32 reserved_1 :11;
++ } part;
++ u32 whole;
++};
++
++/* window 1 stride */
++union gc0er {
++ struct {
++ s16 w1st; /* window 1 stride */
++ s16 aw1st; /* alternate window 1 stride */
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 1 position */
++union gc10r {
++ struct {
++ u32 hc1s :12; /* horizontal cursor 1 start */
++ u32 reserved_1 :4;
++ u32 vc1s :12; /* vertical cursor 1 start */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 1 start address and offset */
++union gc11r {
++ struct {
++ u32 hc1sa :11; /* hardware cursor 1 start address */
++ u32 reserved_1 :5;
++ u32 hc1o :6; /* horizontal cursor 1 offset */
++ u32 reserved_2 :2;
++ u32 vc1o :6; /* vertical cursor 1 offset */
++ u32 reserved_3 :2;
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 1 foreground color */
++union gc12r {
++ struct {
++ u32 hc1fc :24; /* hardware cursor 1 foreground color */
++ u32 reserved_1 :8;
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 1 background color */
++union gc13r {
++ struct {
++ u32 hc1bc :24; /* hardware cursor 1 background color */
++ u32 reserved_1 :8;
++ } part;
++ u32 whole;
++};
++
++
++/* graphics controller 2 register */
++union gc20r {
++ struct {
++ u32 ctl_enbl :1; /* Controller 2 Enable */
++ u32 hc_reset :1; /* Horizontal Counter 2 Reset */
++ u32 vc_reset :1; /* Vertical Counter 2 Reset */
++ u32 iwin_enbl :1; /* Image Window 2 Enable */
++ u32 gcd :4; /* Graphics Color Depth (GCD) */
++
++ u32 hc_enbl :1; /* Hardware Cursor 2 Enable */
++ u32 reserved_1 :2;
++ u32 aiwin_enbl :1; /* Alternate Image Window Enable */
++ u32 agcd :4; /* Alternate Graphics Color Depth (AGCD) */
++
++ u32 g2rclk_src :2; /* G2RCLK Source */
++ u32 tm0 :1; /* Test Mode 0 */
++ u32 tm1 :1; /* Test Mode 1 */
++ u32 fd :3; /* G2MCLK First Clock Divisor (FD1) */
++ u32 reserved_2 :1;
++
++ u32 sd :8; /* G2MCLK Second Clock Divisor (SD1) */
++ } part;
++ u32 whole;
++};
++
++/* graphics controller CRC control */
++union gc21r {
++ struct {
++ u32 crc_enbl :1; /* CRC enable */
++ u32 vsync_wait :1; /* CRC input data control waitime of VSYNC */
++ u32 crc_o_sel :2; /* CRC output select */
++ u32 reserved_1 :4;
++ u32 crc_result :22; /* CRC result (read only) */
++ u32 reserved_2 :2;
++ } part;
++ u32 whole;
++};
++
++/* horizontal display 2 control */
++union gc22r {
++ struct {
++ u32 hd2t :12; /* horizontal display 2 total */
++ u32 reserved_1 :4;
++
++ u32 hd2e :12; /* horizontal display 2 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* vertical display 2 control */
++union gc23r {
++ struct {
++ u32 vd2t :12; /* vertical display 2 total */
++ u32 reserved_1 :4;
++
++ u32 vd2e :12; /* vertical display 2 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* horizontal sync 2 control */
++union gc24r {
++ struct {
++ u32 hs2s :12; /* horizontal sync 2 start */
++ u32 reserved_1 :4;
++
++ u32 hs2e :12; /* horizontal sync 2 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* vertical sync 2 control */
++union gc25r {
++ struct {
++ u32 vs2s :12; /* vertical sync 2 start */
++ u32 reserved_1 :4;
++
++ u32 vs2e :12; /* vertical sync 2 end */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* vertical display 2 count */
++union gc27r {
++ struct {
++ u32 vd_cnt :12; /* vertical display 2 count */
++ u32 reverved_1 :20;
++ } part;
++ u32 whole;
++};
++
++/* horizontal window 2 control */
++union gc28r {
++ struct {
++ u32 hw2s :12; /* horizontal window 2 start (HW2S) */
++ u32 reserved_1 :4;
++
++ u32 hw2w :12; /* horizontal window 2 width (HW2W) */
++ u32 w2ald :4; /* window 2 additional line data */
++ } part;
++ u32 whole;
++};
++
++/* vertical window 2 control */
++union gc29r {
++ struct {
++ u32 vw2s :12; /* vertical window 2 start */
++ u32 reserved_1 :4;
++ u32 vw2h :12; /* vertical window 2 height */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* window 2 start address */
++union gc2cr {
++ struct {
++ u32 w2sa :21; /* window 2 start address */
++ u32 reserved_1 :11;
++ } part;
++ u32 whole;
++};
++
++/* window 2 stride */
++union gc2er {
++ struct {
++ s16 w2st; /* window 2 stride */
++ s16 aw2st; /* alternate window 2 stride */
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 2 position */
++union gc30r {
++ struct {
++ u32 hc2s :12; /* horizontal cursor 2 start */
++ u32 reserved_1 :4;
++ u32 vc2s :12; /* vertical cursor 2 start */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 2 start address and offset */
++union gc31r {
++ struct {
++ u32 hc2sa :11; /* hardware cursor 2 start address */
++ u32 reserved_1 :5;
++ u32 hc2o :6; /* horizontal cursor 2 offset */
++ u32 reserved_2 :2;
++ u32 vc2o :6; /* vertical cursor 2 offset */
++ u32 reserved_3 :2;
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 2 foreground color */
++union gc32r {
++ struct {
++ u32 hc2fc :24; /* hardware cursor 2 foreground color */
++ u32 reserved_1 :8;
++ } part;
++ u32 whole;
++};
++
++/* hardware cursor 2 background color */
++union gc33r {
++ struct {
++ u32 hc2bc :24; /* hardware cursor 2 background color */
++ u32 reserved_1 :8;
++ } part;
++ u32 whole;
++};
++
++
++/* primary drawing command register */
++union ge00r {
++ struct {
++ u32 rop :8; /* raster operation */
++ /**/
++ u32 cmd_typ :3; /* command type */
++ u32 x_dir :1; /* x direction */
++ u32 y_dir :1; /* y direction */
++ u32 src_mem :1; /* source memory */
++ u32 mon_src :1; /* mono source */
++ u32 mon_ptn :1; /* mono pattern */
++ /**/
++ u32 dst_trns_e :1; /* destination transparency enable */
++ u32 dst_trns_p :1; /* destination transparency polarity */
++ u32 mon_trns_e :1; /* mono source or mono pattern transparency
++ enable */
++ u32 mon_trns_p :1; /* mono transparency polarity */
++ u32 mod_sel :1; /* memory to screen or off screen to screen
++ mode select */
++ u32 alpha_sel :2; /* Alpha byte mask selection */
++ u32 sol_col :1; /* solid color */
++ /**/
++ u32 stride_eq :1; /* source stride is equal to destination
++ stride */
++ u32 rop2_sel :1; /* ROP2 code selection */
++ u32 clipping :1; /* enable clipping */
++ u32 auto_exec :1; /* auto execute */
++ u32 reserved_1 :4;
++ } part;
++ u32 whole;
++};
++
++/* primary width and height register */
++union ge01r {
++ struct {
++ u32 width :12; /* source/destination window width */
++ u32 reserved_1 :4;
++
++ u32 height :12; /* source/destination window height */
++ u32 reserved_2 :1;
++ u32 reserved_3 :3;
++ } bitblt;
++ struct {
++ u32 dm :17;
++ u32 axis_major :12;
++ u32 x_y :1; /* x-major or y-major */
++ u32 last_pix :1; /* decision to draw or not to draw the last
++ pixel of the line */
++ u32 reserved_1 :1;
++ } bresenham;
++ u32 whole;
++};
++
++/* primary destination address register */
++union ge02r {
++ struct {
++ u32 dst_x :12; /* destination x position */
++ u32 reserved_1 :1;
++ u32 h_offset :3; /* mono/color pattern horizontal offset */
++
++ u32 dst_y :12; /* destination y position */
++ u32 reserved_2 :1;
++ u32 v_offset :3; /* mono/color pattern vertical offset */
++ } window;
++ struct {
++ u32 x :12; /* starting x coordinate */
++ u32 dm :17; /* 17 bits major-axis delta */
++ u32 reserved_1 :3;
++ } line;
++ u32 whole;
++};
++
++/* source XY register/line draw starting Y coordinate and mintor axis delta */
++union ge03r {
++ struct {
++ u32 src_x :12; /* source X position */
++ u32 reserved_1 :4;
++
++ u32 src_y :12; /* source Y position */
++ u32 reserved_2 :4;
++ } window;
++ struct {
++ u32 start_y :12; /* starting Y coordinate */
++ u32 dn :17; /* 17 bits minor-axis delta */
++ u32 reserved_1 :3;
++ } line;
++ u32 whole;
++};
++
++/* clip left/top register */
++union ge05r {
++ struct {
++ u32 left :12; /* left edge of clipping rectangle */
++ u32 reserved_1 :4;
++
++ u32 top :12; /* top edge of clipping rectangle */
++ u32 reserved_2 :4;
++ } part;
++ u32 whole;
++};
++
++/* source stride/offset register */
++union ge09r {
++ struct {
++ u32 src_strid :12; /* source line stride */
++ u32 reserved_1 :13;
++ u32 strt_bit :3; /* initial mono source bit offset */
++ u32 strt_byte :3; /* initial mono/color source byte offset */
++ u32 reserved_2 :1;
++ } line;
++ struct {
++ u32 strt_bit :5; /* initial mono source bit offset */
++ u32 reserved_1 :1;
++ u32 amount :10; /* number of 16 bytes amount that MIU need
++ to fetch from frame buffer */
++
++ u32 reserved_2 :9;
++ u32 bit_spc :7; /* bit space between lines */
++ } pack_mono;
++ struct {
++ u32 strt_bit :3; /* initial mono source bit offset */
++ u32 strt_byte :3; /* initial mono/color source byte offset */
++ u32 amount :10; /* number of 16 bytes amount that MIU need
++ to fetch from frame buffer */
++
++ u32 reserved_1 :9;
++ u32 bit_spc :3; /* bit space between lines */
++ u32 byt_spc :4; /* byte space between lines */
++ } pack_color;
++ u32 whole;
++};
++
++/* destination stride register and color depth */
++union ge0ar {
++ struct {
++ u32 dst_strid :12; /* destination line stride and color depth */
++ u32 reserved_1 :18;
++ u32 col_dpth :2; /* color depth */
++ } part;
++ u32 whole;
++};
++
++/* graphics controller color pallete */
++union c1xxr {
++ struct {
++ u8 red; /* red color pallete */
++ u8 green; /* green/gray color pallete */
++ u8 blue; /* blue color palette */
++ u8 reserved_1;
++ } part;
++ u32 whole;
++};
++
++/* devicee configuration register 0 */
++union dc00r {
++ struct {
++ u32 osc_bypass :1; /* oscillator bypass */
++ u32 osc_enbl :1; /* oscillator enable */
++ u32 pll1_bypass :1; /* PLL1 bypass */
++ u32 pll1_enbl :1; /* PLL1 enable */
++ u32 pll1_p_par :3; /* PLL1 P parameter */
++ u32 cpu_div :1; /* CPU interface clock divisor */
++ u32 pll1_n_par :5; /* PLL1 N parameter */
++ u32 saisc :1; /* StrongARM interface synchronizer control */
++ u32 s_chp_reset :1; /* software chip reset */
++ u32 mem_enbl :1; /* memory standby enable */
++ u32 pll1_m_par :8; /* PLL 1 M parameter */
++ u32 osc_shaper :1; /* oscillator shaper disable */
++ u32 fast_pwr :1; /* fast power sequencing */
++ u32 osc_frq :2; /* oscillator frequency select */
++ u32 pll1_trim :4; /* PLL 1 trim value */
++ } part;
++ u32 whole;
++};
++
++/* device ID/vendor ID register */
++union pc00r {
++ struct {
++ u16 device; /* device ID */
++ u16 vendor; /* vendor ID */
++ } part;
++ u32 whole;
++};
++
++/* Flat Panel Control Register */
++union fp00r {
++ struct {
++ u32 flatp_enbl : 2; /* Flat Panel Interface Enable */
++ u32 flatp_type : 2; /* Flat Panel Type */
++ u32 mono : 1; /* Mono/Color Panel Select */
++ u32 flatp_intf : 3; /* Flat Panel Interface */
++ u32 dither_pat : 2; /* Dither Pattern */
++ u32 reserved : 2; /* Reserved Must Be 0*/
++ u32 dither_col : 3; /* Dither Base Color */
++ u32 alt_win_ctl: 1; /* Alternate Window Control */
++ u32 frc_ctl : 2; /* FRC Control */
++ u32 dither_adj1: 6; /* Dither Pattern Adjust 1 */
++ u32 dither_adj2: 3; /* Dither Pattern Adjust 2 */
++ u32 dither_adj3: 1; /* Dither Pattern Adjust 3 */
++ u32 test_mode0 : 1; /* Test Mode 0 */
++ u32 test_mode1 : 1; /* Test Mode 1 */
++ u32 test_mode2 : 1; /* Test Mode 2 */
++ u32 test_mode3 : 1; /* Test Mode 3 */
++ } part;
++ u32 whole;
++};
++
++union fp01r {
++ struct {
++ u32 dummy;
++ } part;
++ u32 whole;
++};
++
++union fp02r {
++ struct {
++ u32 dummy;
++ } part;
++ u32 whole;
++};
++
++union fp03r {
++ struct {
++ u32 dummy;
++ } part;
++ u32 whole;
++};
++
++union fp04r {
++ struct {
++ u32 dummy;
++ } part;
++ u32 whole;
++};
++
++union fp05r {
++ struct {
++ u32 dummy;
++ } part;
++ u32 whole;
++};
++
++union fp0fr {
++ struct {
++ u32 dummy;
++ } part;
++ u32 whole;
++};
++
++
++
++
++/****
++ * Others
++ */
++
++#define CHIPNAME "MQ-200"
++
++extern void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr);
++extern void mq200_external_setqmode(struct mq200_monitor_info*, unsigned long, spinlock_t *);
++extern void mq200_external_offdisplay(unsigned long);
++extern void mq200_external_ondisplay (unsigned long);
++extern int mq200_external_probe(unsigned long);
++
++
++
++#endif
+diff -uNr linux-2.6.21.vanilla/drivers/video/mq200/mq_external.c linux-2.6.21/drivers/video/mq200/mq_external.c
+--- linux-2.6.21.vanilla/drivers/video/mq200/mq_external.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/mq200/mq_external.c 2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,513 @@
++/*
++ * Copyright (C) 2005 Holger Hans Peter Freyther
++ *
++ * Based ON:
++ *
++ * linux/drivers/video/mq200fb.c -- MQ-200 for a frame buffer device
++ * based on linux/driver/video/pm2fb.c
++ *
++ * 2007/03/11 mrdata:
++ * bug found in gc1_reset(), renaming to gc1_gc2_reset()
++ * extend mq200_external_ondisplay() -> LCD for GC2 and CRT for GC1
++ *
++ * Copyright (C) 2000 Lineo, Japan
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive
++ * for more details.
++ */
++
++#include <asm/types.h>
++#include <asm/io.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++
++#include <asm/hardware.h>
++
++#include "mq200_data.h"
++
++
++#if 1
++#define PRINTK(args...) printk(args)
++#else
++#define PRINTK(args...)
++#endif
++
++
++/****
++ * power state transition to "state".
++ */
++static void
++power_state_transition(unsigned long register_base, int state)
++{
++ int i;
++ writel(state, PMCSR(register_base));
++ mdelay(300);
++ for (i = 1; ; i++) {
++ udelay(100);
++ if ((readl(PMCSR(register_base)) & 0x3) == state) {
++ break;
++ }
++ }
++}
++
++
++/****
++ * device configuration initialization.
++ */
++static void
++dc_reset(unsigned long register_base)
++{
++ union dc00r dc00r;
++
++ /* Reset First */
++ dc00r.whole = DC_RESET;
++ writel(dc00r.whole, DC00R(register_base));
++ mdelay(100);
++
++ dc00r.whole = 0xEF2082A;
++ writel(dc00r.whole, DC00R(register_base));
++ mdelay(300);
++ PRINTK(CHIPNAME ": DC00R = 0x%08X\n", readl(DC00R(register_base)));
++}
++
++
++/****
++ * initialize memory interface unit.
++ */
++static void
++miu_reset(unsigned long register_base)
++{
++ union mm00r mm00r;
++ union mm01r mm01r;
++ union mm02r mm02r;
++ union mm03r mm03r;
++ union mm04r mm04r;
++
++ /* MIU interface control 1 */
++ mm00r.whole = 0x4;
++ writel(mm00r.whole, MM00R(register_base));
++ mdelay(50);
++ writel(0, MM00R(register_base));
++ mdelay(50);
++
++ /* MIU interface control 2
++ * o PLL 1 output is used as memory clock source.
++ */
++ mm01r.whole = 0x4143e086;
++ writel(mm01r.whole, MM01R(register_base));
++
++ /* memory interface control 3 */
++ mm02r.whole = 0x6d6aabff;
++ writel(mm02r.whole, MM02R(register_base));
++
++ /* memory interface control 5 */
++ mm04r.whole = 0x10d;
++ writel(mm04r.whole, MM04R(register_base));
++
++ /* memory interface control 4 */
++ mm03r.whole = 0x1;
++ writel(mm03r.whole, MM03R(register_base));
++ mdelay(50);
++
++ /* MIU interface control 1 */
++ mm00r.whole = 0x3;
++ writel(mm00r.whole, MM00R(register_base));
++ mdelay(50);
++}
++
++/****
++ *
++ */
++static
++void fpctrl_reset(unsigned long addr)
++{
++ /*
++ * We're in D0 State, let us set the FPCTRL
++ */
++ union fp00r fp00r;
++ union fp01r fp01r;
++ union fp02r fp02r;
++ union fp03r fp03r;
++ union fp04r fp04r;
++ union fp0fr fp0fr;
++
++ fp00r.whole = 0x6320;
++ writel(fp00r.whole, FP00R(addr));
++
++ fp01r.whole = 0x20;
++ writel(fp01r.whole, FP01R(addr));
++
++ fp04r.whole = 0xBD0001;
++ writel(fp04r.whole, FP04R(addr));
++
++ /* Set Flat Panel General Purpose register first */
++ fp02r.whole = 0x0;
++ writel(fp02r.whole, FP02R(addr));
++
++ fp03r.whole = 0x0;
++ writel(fp03r.whole, FP03R(addr));
++
++ fp0fr.whole = 0xA16c44;
++ writel(fp0fr.whole, FP0FR(addr));
++
++ /* Set them again */
++ fp02r.whole = 0x0;
++ writel(fp02r.whole, FP02R(addr));
++
++ fp03r.whole = 0x0;
++ writel(fp03r.whole, FP03R(addr));
++}
++
++
++/****
++ * initialize power management unit.
++ */
++static void
++pmu_reset(unsigned long register_base)
++{
++ union pm00r pm00r;
++ union pm01r pm01r;
++ union pm02r pm02r;
++
++ /* power management miscellaneous control
++ * o GE is driven by PLL 1 clock.
++ */
++ pm00r.whole = 0xc0900;
++ writel(pm00r.whole, PM00R(register_base));
++
++ /* D1 state control */
++ pm01r.whole = 0x5000271;
++ writel(pm01r.whole, PM01R(register_base));
++
++ /* D2 state control */
++ pm02r.whole = 0x271;
++ writel(pm02r.whole, PM02R(register_base));
++}
++
++/****
++ * initialize graphics controller 1
++ * and graphics controller 2
++ */
++static void
++gc1_gc2_reset(unsigned long register_base, spinlock_t *lock )
++{
++ unsigned long flags;
++ union gc00r gc00r;
++ union gc01r gc01r;
++ union gc02r gc02r;
++ union gc03r gc03r;
++ union gc04r gc04r;
++ union gc05r gc05r;
++ union gc08r gc08r;
++ union gc09r gc09r;
++ union gc0cr gc0cr;
++ union gc0er gc0er;
++ union gc20r gc20r;
++ union gc22r gc22r;
++ union gc23r gc23r;
++ union gc24r gc24r;
++ union gc25r gc25r;
++ union gc28r gc28r;
++ union gc29r gc29r;
++ union gc2cr gc2cr;
++ union gc2er gc2er;
++
++ union pm00r pm00r;
++ union pm06r pm06r;
++ union pm06r pm07r;
++
++ spin_lock_irqsave(lock, flags);
++
++ /* alternate window 1 stride */
++ gc0er.whole = 0x640;
++ writel(gc0er.whole, GC0ER(register_base));
++
++ /* image window 1 start address */
++ gc0cr.whole = 0x0;
++ writel(gc0cr.whole, GC0CR(register_base));
++
++ /* alternate window 2 stride */
++ gc2er.whole = 0x640;
++ writel(gc0er.whole, GC2ER(register_base));
++
++ /* image window 2 start address */
++ gc2cr.whole = 0x0;
++ writel(gc2cr.whole, GC2CR(register_base));
++
++ /* read PM Register */
++ pm00r.whole = readl(PM00R(register_base));
++
++ /* horizontal window 1 control */
++ gc08r.whole = 0x131f0000;
++ writel(gc08r.whole, GC08R(register_base));
++
++ /* vertical window 1 control */
++ gc09r.whole = 0x12570000;
++ writel(gc09r.whole, GC09R(register_base));
++
++ /* horizontal display 1 control */
++ gc02r.whole = 0x320041e;
++ writel(gc02r.whole, GC02R(register_base));
++
++ /* vertical display 1 control */
++ gc03r.whole = 0x2570273;
++ writel(gc03r.whole, GC03R(register_base));
++
++ /* horizontal sync 1 control */
++ gc04r.whole = 0x3c70347;
++ writel(gc04r.whole, GC04R(register_base));
++
++ /* vertical sync 1 control */
++ gc05r.whole = 0x25d0259;
++ writel(gc05r.whole, GC05R(register_base));
++
++ /* graphics controller CRT control */
++ gc01r.whole = 0x800;
++ writel(gc01r.whole, GC01R(register_base));
++
++ /* PLL 2 programming */
++ pm06r.whole = 0xE90830;
++ writel(pm06r.whole, PM06R(register_base));
++
++ /* graphics controller 1 register
++ * o GC1 clock source is PLL 2.
++ * o hardware cursor is disabled.
++ */
++ gc00r.whole = 0x10000C8 | 0x20000;
++ writel(gc00r.whole, GC00R(register_base));
++
++#if 0
++ /* alternate horizontal window 1 control */
++ writel(0, GC0AR(register_base));
++
++ /* alternate vertical window 1 control */
++ writel(0, GC0BR(register_base));
++
++ /* window 1 start address */
++ writel(0x2004100, GC0CR(register_base));
++
++ /* alternate window 1 start address */
++ writel(0, GC0DR(register_base));
++
++ /* window 1 stride */
++ gc0er.whole = 0x5100048;
++ writel(gc0er.whole, GC0ER(register_base));
++
++ /* reserved register - ??? - */
++ writel(0x31f, GC0FR(register_base));
++#endif
++
++#if 0
++ /* hardware cursor 1 position */
++ writel(0, GC10R(register_base));
++
++ /* hardware cursor 1 start address and offset */
++ gc11r.whole = 0x5100048;
++ writel(gc11r.whole, GC11R(register_base));
++
++ /* hardware cursor 1 foreground color */
++ writel(0x00ffffff, GC12R(register_base));
++
++ /* hardware cursor 1 background color */
++ writel(0x00000000, GC13R(register_base));
++#endif
++
++ /* horizontal window 2 control */
++ gc28r.whole = 0x31f0000;
++ writel(gc28r.whole, GC28R(register_base));
++
++ /* vertical window 2 control */
++ gc29r.whole = 0x2570000;
++ writel(gc29r.whole, GC29R(register_base));
++
++ /* horizontal display 2 control */
++ gc22r.whole = 0x320041e;
++ writel(gc22r.whole, GC22R(register_base));
++
++ /* vertical display 2 control */
++ gc23r.whole = 0x2570273;
++ writel(gc23r.whole, GC23R(register_base));
++
++ /* horizontal sync 2 control */
++ gc24r.whole = 0x3c70347;
++ writel(gc24r.whole, GC24R(register_base));
++
++ /* vertical sync 2 control */
++ gc25r.whole = 0x25d0259;
++ writel(gc25r.whole, GC25R(register_base));
++
++ /* graphics controller CRT control */
++ gc01r.whole = 0x800;
++ writel(gc01r.whole, GC01R(register_base));
++
++ /* PLL 3 programming */
++ pm07r.whole = 0xE90830;
++ writel(pm07r.whole, PM07R(register_base));
++
++ /* graphics controller 2 register
++ * o GC2 clock source is PLL 3.
++ * o hardware cursor is disabled.
++ */
++ gc20r.whole = 0x10000C8 | 0x30000;
++ writel(gc20r.whole, GC20R(register_base));
++
++ /*
++ * Enable PLL2 and PLL3 in the PM Register
++ */
++ pm00r.part.pll2_enbl = 0x1;
++ pm00r.part.pll3_enbl = 0x1;
++ writel(pm00r.whole, PM00R(register_base));
++
++ spin_unlock_irqrestore(lock, flags);
++}
++
++
++/****
++ * initialize graphics engine.
++ */
++static void
++ge_reset(unsigned long register_base)
++{
++ /* drawing command register */
++ writel(0, GE00R(register_base));
++
++ /* promary width and height register */
++ writel(0, GE01R(register_base));
++
++ /* primary destination address register */
++ writel(0, GE02R(register_base));
++
++ /* primary source XY register */
++ writel(0, GE03R(register_base));
++
++ /* primary color compare register */
++ writel(0, GE04R(register_base));
++
++ /* primary clip left/top register */
++ writel(0, GE05R(register_base));
++
++ /* primary clip right/bottom register */
++ writel(0, GE06R(register_base));
++
++ /* primary source and pattern offset register */
++ writel(0, GE07R(register_base));
++
++ /* primary foreground color register/rectangle fill color depth */
++ writel(0, GE08R(register_base));
++
++ /* source stride/offset register */
++ writel(0, GE09R(register_base));
++
++ /* destination stride register and color depth */
++ writel(0, GE0AR(register_base));
++
++ /* image base address register */
++ writel(0, GE0BR(register_base));
++}
++
++/****
++ * initialize Color Palette 1.
++ */
++static void
++cp1_reset(unsigned long addr_info)
++{
++ int i;
++
++ for (i = 0; i < 256; i++)
++ writel(0, C1xxR(addr_info, i));
++}
++
++
++/*
++ * Below functions are called from the skeleton
++ */
++void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr)
++{
++ writel(color,C1xxR(addr,regno));
++}
++
++void mq200_external_setqmode(struct mq200_monitor_info* info,
++ unsigned long addr, spinlock_t *lock)
++{
++ dc_reset(addr); /* device configuration */
++
++ power_state_transition(addr, 0); /* transition to D0 state */
++
++ pmu_reset(addr); /* power management unit */
++
++ miu_reset(addr); /* memory interface unit */
++
++ ge_reset(addr); /* graphics engine */
++
++ fpctrl_reset(addr); /* reset the panel settings */
++
++ gc1_gc2_reset(addr, lock); /* graphics controller 1 and 2 */
++
++ cp1_reset(addr); /* color palette 1 */
++
++ mq200_external_ondisplay(addr); /* LCD and CRT */
++}
++
++void mq200_external_offdisplay(unsigned long addr)
++{
++ /*
++ * Move the MQ200 to D3 mode
++ */
++ power_state_transition(addr, 3);
++}
++
++/**
++ * to be called after mq200_external_setqmode
++ */
++void mq200_external_ondisplay (unsigned long addr)
++{
++ /*
++ * Set the framebuffer details
++ */
++ union gc00r gc00r;
++ union gc01r gc01r;
++ union gc20r gc20r;
++ union fp00r fp00r;
++
++ /* enable LCD for GC2 */
++ fp00r.whole = readl(FP00R(addr));
++ fp00r.whole &= 0xfffffffc;
++
++ gc20r.whole = readl(GC20R(addr));
++
++ if(!(gc20r.whole & 0x1)) {
++ gc20r.whole |= 0x1;
++ writel(gc20r.whole, GC20R(addr));
++ }
++
++ fp00r.whole |= 0x3;
++ writel(fp00r.whole, FP00R(addr));
++
++ /* enable CRT for GC1 */
++ gc00r.whole = readl(GC00R(addr));
++
++ if(!(gc00r.whole & 0x1)) {
++ gc00r.whole |= 0x1;
++ writel(gc00r.whole, GC00R(addr));
++ }
++
++ gc01r.whole = readl(GC01R(addr));
++ gc01r.whole &= 0xfffffffc;
++
++ gc01r.whole |= 0x1;
++ writel(gc01r.whole, GC01R(addr));
++
++}
++
++int mq200_external_probe(unsigned long addr)
++{
++ union pc00r pc00r;
++ if(readl(PMR(addr)) != PMR_VALUE)
++ return 0;
++
++ pc00r.whole = readl(PC00R(addr));
++ printk(KERN_INFO "mq200 video driver found Vendor: 0x%X Device: 0x%X\n",
++ pc00r.part.device, pc00r.part.vendor);
++ return 1;
++}
+diff -uNr linux-2.6.21.vanilla/drivers/video/mq200/mq_skeleton.c linux-2.6.21/drivers/video/mq200/mq_skeleton.c
+--- linux-2.6.21.vanilla/drivers/video/mq200/mq_skeleton.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/mq200/mq_skeleton.c 2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,398 @@
++/*
++ * Author: Holger Hans Peter Freyther
++ *
++ *
++ * This implements the frame buffer driver interface to communicate
++ * with the kernel.
++ * It uses the mq200 routines from the ucLinux driver from Lineo
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/autoconf.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/fb.h>
++#include <linux/types.h>
++#include <linux/spinlock.h>
++
++#include "mq200_data.h"
++
++#if CONFIG_SA1100_SIMPAD
++/*
++ * Siemens SIMpad specefic data
++ */
++#include <asm/arch/simpad.h>
++#include <asm/arch/hardware.h>
++
++#define MQ200_REGIONS simpad_mq200_regions
++#define MQ200_MONITOR simpad_mq200_panel
++
++static struct mq200_io_regions simpad_mq200_regions = {
++ .fb_size = MQ200_FB_SIZE,
++ .phys_mmio_base = 0x4be00000,
++ .virt_mmio_base = 0xf2e00000,
++ .phys_fb_base = 0x4b800000,
++ .virt_fb_base = 0xf2800000,
++};
++
++static struct mq200_monitor_info simpad_mq200_panel = {
++ .horizontal_res = 800,
++ .vertical_res = 600,
++ .depth = 16,
++ .refresh = 60,
++ .line_length = 1600,
++ .flags = 0x00130004,
++};
++
++extern long get_cs3_shadow(void);
++extern void set_cs3_bit(int value);
++extern void clear_cs3_bit(int value);
++#endif
++
++
++
++struct mq200_info {
++ struct fb_info fb_info;
++ struct mq200_io_regions io_regions;
++ struct mq200_monitor_info monitor_info;
++
++ /* palette */
++ u32 pseudo_palette[17]; /* 16 colors + 1 in reserve not that well documented... */
++ spinlock_t lock;
++};
++
++
++
++static int mq200_blank( int blank_mode, struct fb_info *info )
++{
++#ifdef CONFIG_SA1100_SIMPAD
++ if(blank_mode ){
++ clear_cs3_bit(DISPLAY_ON);
++ }else {
++ set_cs3_bit(DISPLAY_ON);
++ }
++#endif
++ return 0;
++}
++
++
++static int mq200_check_var(struct fb_var_screeninfo *var,
++ struct fb_info *info )
++{ /* TODO do we need sanity checks here */
++ return 0;
++}
++
++
++static int mq200_set_par( struct fb_info *info )
++{
++ /* TODO set paraemeter */
++ return 0;
++}
++
++static int mq200_setcolreg(unsigned regno, unsigned red, unsigned green,
++ unsigned blue, unsigned transp,
++ struct fb_info *info )
++{
++ struct mq200_info *p;
++ unsigned long color;
++ u32* pal = info->pseudo_palette;
++
++ p = info->par;
++
++ if(regno > 255 )
++ return 1;
++
++ switch( info->var.bits_per_pixel ){
++ case 16:
++ pal[regno] =
++ ((red & 0xf800) >> 0) |
++ ((green & 0xf800) >> 5) | ((blue & 0xf800) >> 11);
++ break;
++ case 24:
++ pal[regno] =
++ ((red & 0xff00) << 8) |
++ ((green & 0xff00)) | ((blue & 0xff00) >> 8);
++ break;
++ case 32:
++ pal[regno] =
++ ((red & 0xff00) >> 8) |
++ ((green & 0xff00)) | ((blue & 0xff00) << 8);
++ break;
++ default:
++ break;
++ }
++
++ red &= 0xFF;
++ green &= 0xFF;
++ blue &= 0xFF;
++
++ color = red | (green << 8) | (blue << 16);
++ mq200_external_setpal(regno, color, p->io_regions.virt_mmio_base);
++
++ return 0;
++}
++
++
++static struct fb_ops mq200_ops = {
++ .owner = THIS_MODULE,
++ .fb_check_var = mq200_check_var,
++ .fb_set_par = mq200_set_par,
++ .fb_setcolreg = mq200_setcolreg,
++#ifdef FB_SOFT_CURSOR
++ .fb_cursor = soft_cursor, /* FIXME use hardware cursor */
++#endif
++ .fb_fillrect = cfb_fillrect,
++ .fb_copyarea = cfb_copyarea,
++ .fb_imageblit = cfb_imageblit,
++ .fb_blank = mq200_blank,
++};
++
++
++/*********************************************************************
++ *
++ * Device driver and module init code
++ * this will register to the fb layer later
++ *
++ *********************************************************************/
++static void mq200_internal_init_color( struct fb_bitfield* red,
++ struct fb_bitfield* green,
++ struct fb_bitfield* blue,
++ int bpp )
++{
++ switch ( bpp )
++ {
++ case 16:
++ red->offset = 11;
++ green->offset = 5;
++ blue->offset = 0;
++
++ red->length = 5;
++ green->length = 6;
++ blue->length = 5;
++ break;
++ case 24:
++ red->offset = 16;
++ green->offset = 8;
++ blue->offset = 0;
++
++ red->length = 8;
++ green->length = 8;
++ blue->length = 8;
++ break;
++ case 32:
++ red->offset = 0;
++ green->offset = 8;
++ blue->offset = 16;
++
++ red->length = 8;
++ green->length = 8;
++ blue->length = 8;
++ case 8: /* fall through */
++ default:
++ red->offset = green->offset = blue->offset = 0;
++ red->length = green->length = blue->length = bpp;
++ break;
++ }
++
++}
++
++
++static struct mq200_info* __init mq200_internal_init_fbinfo(void)
++{
++ struct mq200_info *info = NULL;
++
++ info = (struct mq200_info*)kmalloc(sizeof(*info), GFP_KERNEL);
++ if(!info)
++ return NULL;
++
++ /*
++ * Initialize memory
++ */
++ memset(info, 0, sizeof(struct mq200_info) );
++ spin_lock_init(&info->lock);
++
++ /* set the base IO addresses */
++ info->io_regions = MQ200_REGIONS;
++ info->monitor_info = MQ200_MONITOR;
++
++ info->fb_info.screen_base = (char *)info->io_regions.virt_fb_base;
++
++ /* fb_fix_screeninfo filling */
++ strcpy(info->fb_info.fix.id, "MQ200_FB" );
++ info->fb_info.fix.smem_start = info->io_regions.phys_fb_base;
++ info->fb_info.fix.smem_len = info->io_regions.fb_size; /* - CURSOR_IMAGE */
++ info->fb_info.fix.mmio_start = info->io_regions.phys_mmio_base;
++ info->fb_info.fix.mmio_len = MQ200_REGS_SIZE;
++ info->fb_info.fix.type = FB_TYPE_PACKED_PIXELS;
++ info->fb_info.fix.accel = FB_ACCEL_NONE;
++ info->fb_info.fix.line_length = MQ200_MONITOR_LINE_LENGTH(info);
++
++ if(MQ200_MONITOR_DEPTH(info) <= 8 )
++ info->fb_info.fix.visual = FB_VISUAL_PSEUDOCOLOR;
++ else if( MQ200_MONITOR_DEPTH(info) >= 16 )
++ info->fb_info.fix.visual = FB_VISUAL_DIRECTCOLOR;
++ else
++ panic("Calling mq200 with wrong display data\n");
++
++ /* set the variable screen info */
++ info->fb_info.var.xres = MQ200_MONITOR_HORI_RES(info);
++ info->fb_info.var.yres = MQ200_MONITOR_VERT_RES(info);
++ info->fb_info.var.xres_virtual = MQ200_MONITOR_HORI_RES(info);
++ info->fb_info.var.yres_virtual = MQ200_MONITOR_VERT_RES(info);
++ info->fb_info.var.bits_per_pixel = MQ200_MONITOR_DEPTH(info);
++
++ mq200_internal_init_color(&info->fb_info.var.red,
++ &info->fb_info.var.green,
++ &info->fb_info.var.blue,
++ MQ200_MONITOR_DEPTH(info) );
++
++ info->fb_info.var.transp.length = info->fb_info.var.transp.offset = 0;
++ info->fb_info.var.height = info->fb_info.var.width = -1;
++
++ info->fb_info.var.vmode = FB_VMODE_NONINTERLACED;
++ info->fb_info.var.pixclock = 10000;
++ info->fb_info.var.left_margin = info->fb_info.var.right_margin = 16;
++ info->fb_info.var.upper_margin = info->fb_info.var.lower_margin = 16;
++ info->fb_info.var.hsync_len = info->fb_info.var.vsync_len = 8;
++
++ info->fb_info.var.nonstd = 0;
++ info->fb_info.var.activate = FB_ACTIVATE_NOW;
++ info->fb_info.var.accel_flags = 0;
++
++ return info;
++}
++
++
++extern void mq200_register_attributes(struct device* );
++/*
++ * gets called from the bus
++ * we will register our framebuffer from here
++ */
++static int __init mq200_probe(struct device *dev)
++{
++ struct mq200_info *info = NULL;
++ int retv= 0;
++
++ info = mq200_internal_init_fbinfo();
++ if(!mq200_external_probe(info->io_regions.virt_mmio_base))
++ goto error_out;
++
++ GPDR |= (1<<3);
++ GAFR &= ~(1<<3);
++ GPSR |= (1<<3);
++
++ mq200_external_setqmode(&info->monitor_info,
++ info->io_regions.virt_mmio_base,
++ &info->lock);
++
++ info->fb_info.fbops = &mq200_ops;
++ info->fb_info.flags = FBINFO_FLAG_DEFAULT;
++
++ mq200_check_var(&info->fb_info.var, &info->fb_info );
++
++ fb_alloc_cmap(&info->fb_info.cmap, 1 << MQ200_MONITOR_DEPTH(info), 0 );
++
++ info->fb_info.pseudo_palette = (void*)info->pseudo_palette;
++
++ /* save the pointer to the mq200 struct in var */
++ info->fb_info.par = info;
++
++ retv = register_framebuffer(&info->fb_info );
++ if(retv < 0)
++ goto error_out;
++
++
++ /* will get unset if retv != 0 */
++ dev_set_drvdata(dev, info );
++ return retv;
++
++/*
++ * Free the info and exit
++ */
++error_out:
++ kfree(info);
++ return -EINVAL;
++}
++
++#ifdef CONFIG_PM
++static struct mq200_info* get_mq200_info( struct device *dev)
++{
++ return dev_get_drvdata(dev);
++}
++
++static unsigned long get_mmio_base( struct device *dev )
++{
++ struct mq200_info *info = get_mq200_info(dev);
++ return info->io_regions.virt_mmio_base;
++}
++
++static struct mq200_monitor_info* get_monitor_info( struct device *dev)
++{
++ struct mq200_info *info = get_mq200_info(dev);
++ return &info->monitor_info;
++}
++
++static spinlock_t* get_spinlock( struct device *dev)
++{
++ return &get_mq200_info(dev)->lock;
++}
++
++/*
++ * FIXME: make sure we only call mq200_external_offdisplay only once
++ * a 2nd time will hang the kernel -zecke
++ *
++ * FIXME: save the content of the framebuffer inside dev->saved_state
++ * so on resume we can memcpy it back into the buffer and userspace
++ * does not need to redraw
++ *
++ * functions for suspending and resuming
++ */
++static int mq200_suspend(struct device *dev, pm_message_t state)
++{
++
++ mq200_external_offdisplay( get_mmio_base(dev) );
++ clear_cs3_bit(DISPLAY_ON);
++
++
++ return 0;
++}
++
++static int mq200_resume(struct device *dev)
++{
++ unsigned long mem = get_mmio_base(dev);
++ struct mq200_monitor_info *monitor = get_monitor_info(dev);
++ mq200_external_setqmode(monitor, mem, get_spinlock(dev) );
++
++
++ /*
++ * Set display on if it was on
++ */
++ set_cs3_bit(DISPLAY_ON);
++
++ return 0;
++}
++
++
++#endif
++
++
++static struct device_driver mq200fb_driver = {
++ .name = "simpad-mq200",
++ .bus = &platform_bus_type,
++ .probe = mq200_probe, /* will be called after we've registered the driver */
++ .suspend = mq200_suspend,
++ .resume = mq200_resume
++};
++
++int __devinit mq200_init(void)
++{
++ return driver_register(&mq200fb_driver);
++}
++
++module_init(mq200_init);
++MODULE_DESCRIPTION("MQ200 framebuffer driver");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Holger Hans Peter Freyther");
diff --git a/packages/linux/linux/simpad/linux-2.6.21-SIMpad-serial-and-gpio_keys.patch b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-serial-and-gpio_keys.patch
new file mode 100644
index 0000000000..90ce4cb009
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-serial-and-gpio_keys.patch
@@ -0,0 +1,194 @@
+diff -uNr linux-2.6.21.vanilla/arch/arm/mach-sa1100/simpad.c linux-2.6.21/arch/arm/mach-sa1100/simpad.c
+--- linux-2.6.21.vanilla/arch/arm/mach-sa1100/simpad.c 2007-05-01 16:40:44.000000000 +0200
++++ linux-2.6.21/arch/arm/mach-sa1100/simpad.c 2007-05-01 19:23:29.000000000 +0200
+@@ -1,5 +1,14 @@
+ /*
+ * linux/arch/arm/mach-sa1100/simpad.c
++ *
++ * 2007/04/11 mrdata:
++ * - insert simpad_uart_set_mctrl()
++ * simpad_uart_get_mctrl()
++ * - internal RS232/DECT/Bluetooth
++ * works again (based on 2.4 simpad-serial.patch)
++ *
++ * 2007/04/12 Bernhard Guillon:
++ * -added gpio_keys (based on h3000.c from hh.org)
+ */
+
+ #include <linux/module.h>
+@@ -27,6 +36,8 @@
+
+ #include <linux/serial_core.h>
+ #include <linux/ioport.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
+ #include <asm/io.h>
+
+ #include "generic.h"
+@@ -55,6 +66,7 @@
+ *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow;
+ }
+
++EXPORT_SYMBOL(get_cs3_shadow);
+ EXPORT_SYMBOL(set_cs3_bit);
+ EXPORT_SYMBOL(clear_cs3_bit);
+
+@@ -73,23 +85,71 @@
+ };
+
+
++static void simpad_uart_set_mctrl(struct uart_port *port, u_int mctrl)
++{
++ if (port->mapbase == _Ser1UTCR0) {
++ /* internal serial port (ttySA1, DECT/Bluetooth) */
++ if (mctrl & TIOCM_RTS) GPCR = GPIO_UART1_RTS;
++ else GPSR = GPIO_UART1_RTS;
++
++ if (mctrl & TIOCM_DTR) GPCR = GPIO_UART1_DTR;
++ else GPSR = GPIO_UART1_DTR;
++ }
++
++ else if (port->mapbase == _Ser3UTCR0) {
++ /* external serial port (ttySA0, RS232) */
++ if (mctrl & TIOCM_RTS) GPCR = GPIO_UART3_RTS;
++ else GPSR = GPIO_UART3_RTS;
++
++ if (mctrl & TIOCM_DTR) GPCR = GPIO_UART3_DTR;
++ else GPSR = GPIO_UART3_DTR;
++ }
++}
++
++
++static u_int simpad_uart_get_mctrl(struct uart_port *port)
++{
++ u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
++
++ if (port->mapbase == _Ser1UTCR0) {
++ /* internal serial port (ttySA1, DECT/Bluetooth) */
++ int gplr = GPLR;
++ if (gplr & GPIO_UART1_DCD) ret &= ~TIOCM_CD;
++ if (gplr & GPIO_UART1_CTS) ret &= ~TIOCM_CTS;
++ if (gplr & GPIO_UART1_DSR) ret &= ~TIOCM_DSR;
++ }
++
++ else if (port->mapbase == _Ser3UTCR0) {
++ /* external serial port (ttySA0, RS232) */
++ int gplr = GPLR;
++ if (gplr & GPIO_UART3_DCD) ret &= ~TIOCM_CD;
++ if (gplr & GPIO_UART3_CTS) ret &= ~TIOCM_CTS;
++ if (gplr & GPIO_UART3_DSR) ret &= ~TIOCM_DSR;
++ }
++ return ret;
++}
++
++
+ static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+ {
+- if (port->mapbase == (u_int)&Ser1UTCR0) {
+- if (state)
+- {
+- clear_cs3_bit(RS232_ON);
+- clear_cs3_bit(DECT_POWER_ON);
+- }else
+- {
+- set_cs3_bit(RS232_ON);
+- set_cs3_bit(DECT_POWER_ON);
+- }
+- }
++ if (port->mapbase == (u_int)&Ser3UTCR0) {
++ if (state)
++ {
++ clear_cs3_bit(RS232_ON);
++ /* clear_cs3_bit(DECT_POWER_ON); */
++ }else
++ {
++ set_cs3_bit(RS232_ON);
++ /* set_cs3_bit(DECT_POWER_ON); */
++ }
++ }
+ }
+
++
+ static struct sa1100_port_fns simpad_port_fns __initdata = {
+- .pm = simpad_uart_pm,
++ .set_mctrl = simpad_uart_set_mctrl,
++ .get_mctrl = simpad_uart_get_mctrl,
++ .pm = simpad_uart_pm,
+ };
+
+
+@@ -150,7 +210,7 @@
+ sa1100_register_uart(0, 3); /* serial interface */
+ sa1100_register_uart(1, 1); /* DECT */
+
+- // Reassign UART 1 pins
++ /* Reassign UART 1 pins */
+ GAFR |= GPIO_UART_TXD | GPIO_UART_RXD;
+ GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15;
+ GPDR &= ~GPIO_UART_RXD;
+@@ -173,7 +233,7 @@
+
+ static void simpad_power_off(void)
+ {
+- local_irq_disable(); // was cli
++ local_irq_disable(); /* was cli */
+ set_cs3(0x800); /* only SD_MEDIAQ */
+
+ /* disable internal oscillator, float CS lines */
+@@ -197,19 +257,42 @@
+
+
+ /*
++ * gpio_keys
++*/
++
++static struct gpio_keys_button simpad_button_table[] = {
++ { KEY_POWER, IRQ_GPIO_POWER_BUTTON, 0, "power button" },
++};
++
++static struct gpio_keys_platform_data simpad_keys_data = {
++ .buttons = simpad_button_table,
++ .nbuttons = ARRAY_SIZE(simpad_button_table),
++};
++
++static struct platform_device simpad_keys = {
++ .name = "gpio-keys",
++ .dev = {
++ .platform_data = &simpad_keys_data,
++ },
++};
++
++
++/*
+ * MediaQ Video Device
+ */
++
+ static struct platform_device simpad_mq200fb = {
+ .name = "simpad-mq200",
+ .id = 0,
+ };
+
++
+ static struct platform_device *devices[] __initdata = {
+- &simpad_mq200fb
++ &simpad_keys,
++ &simpad_mq200fb,
+ };
+
+
+-
+ static int __init simpad_init(void)
+ {
+ int ret;
+diff -uNr linux-2.6.21.vanilla/include/asm-arm/arch-sa1100/simpad.h linux-2.6.21/include/asm-arm/arch-sa1100/simpad.h
+--- linux-2.6.21.vanilla/include/asm-arm/arch-sa1100/simpad.h 2007-05-01 16:40:51.000000000 +0200
++++ linux-2.6.21/include/asm-arm/arch-sa1100/simpad.h 2007-05-01 19:22:45.000000000 +0200
+@@ -12,7 +12,7 @@
+ #define __ASM_ARCH_SIMPAD_H
+
+
+-#define GPIO_UART1_RTS GPIO_GPIO14
++#define GPIO_UART1_RTS GPIO_GPIO9
+ #define GPIO_UART1_DTR GPIO_GPIO7
+ #define GPIO_UART1_CTS GPIO_GPIO8
+ #define GPIO_UART1_DCD GPIO_GPIO23
diff --git a/packages/linux/linux/simpad/linux-2.6.21-SIMpad-ucb1x00-switches.patch b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-ucb1x00-switches.patch
new file mode 100644
index 0000000000..ff2f50566c
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-ucb1x00-switches.patch
@@ -0,0 +1,189 @@
+diff -uNr linux-2.6.21.vanilla/drivers/mfd/Kconfig linux-2.6.21/drivers/mfd/Kconfig
+--- linux-2.6.21.vanilla/drivers/mfd/Kconfig 2007-05-01 16:40:45.000000000 +0200
++++ linux-2.6.21/drivers/mfd/Kconfig 2007-05-01 16:55:38.000000000 +0200
+@@ -37,4 +37,7 @@
+ tristate "Touchscreen interface support"
+ depends on MCP_UCB1200 && INPUT
+
++config MCP_UCB1200_SWITCHES
++ tristate "SIMpad Switches support"
++ depends on MCP_UCB1200 && INPUT
+ endmenu
+diff -uNr linux-2.6.21.vanilla/drivers/mfd/Makefile linux-2.6.21/drivers/mfd/Makefile
+--- linux-2.6.21.vanilla/drivers/mfd/Makefile 2007-05-01 16:40:45.000000000 +0200
++++ linux-2.6.21/drivers/mfd/Makefile 2007-05-01 16:55:38.000000000 +0200
+@@ -8,7 +8,7 @@
+ obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
+ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
+ obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
+-
++obj-$(CONFIG_MCP_UCB1200_SWITCHES) += ucb1x00-switches.o
+ ifeq ($(CONFIG_SA1100_ASSABET),y)
+ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
+ endif
+diff -uNr linux-2.6.21.vanilla/drivers/mfd/ucb1x00-switches.c linux-2.6.21/drivers/mfd/ucb1x00-switches.c
+--- linux-2.6.21.vanilla/drivers/mfd/ucb1x00-switches.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/mfd/ucb1x00-switches.c 2007-05-01 16:55:38.000000000 +0200
+@@ -0,0 +1,162 @@
++/*
++ * linux/drivers/mfd/ucb1x00-switches.c
++ *
++ * Copyright (C) 2007 Bernhard Guillon.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++ *
++ * This driver is for the Switches of Siemens SIMpad (CL4,SL4,SLC), T-Sinus-Pad and
++ * Swisscom WP50 devices.
++ *
++ * Six switches are routed to GPIO pins on the UCB1300: S3 -- S8.
++ *
++ * This driver is based on the 2.4 ucb1x00-switches, the 2.6 ucb1x00-assabet
++ * and the ucb1x00-ts driver.
++ *
++ */
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/device.h>
++
++#include <asm/dma.h>
++
++#include "ucb1x00.h"
++
++static int key [6] = { KEY_PROG1,KEY_PROG2,KEY_UP,KEY_DOWN,KEY_LEFT,KEY_RIGHT };
++
++struct ucb1x00_switches {
++ struct input_dev *idev;
++ struct ucb1x00 *ucb;
++};
++
++static void ucb1x00_dev_irq(int idx, void *id)
++{
++ static unsigned short int last;
++ unsigned short int this;
++ struct ucb1x00_switches *switches = id;
++ struct input_dev *idev = switches->idev;
++
++ ucb1x00_enable(switches->ucb);
++
++ this=~ucb1x00_io_read(switches->ucb);
++ if (this==last) {
++ return;
++ }
++
++ last=this;
++
++ if ((idx >=0) && (idx <=5)) {
++ if ((this & (1<<idx)) != 0) input_report_key(idev, key[idx], 1);
++ else input_report_key(idev, key[idx], 0);
++ }
++ else {
++ printk(KERN_DEBUG "switches-ucb1x00 is BUGGY!!! \n");
++ return;
++ }
++
++}
++
++static int ucb1x00_switches_add(struct ucb1x00_dev *dev)
++{
++ struct ucb1x00_switches *switches;
++ struct input_dev *idev;
++ int err,i;
++
++ switches = kzalloc(sizeof(struct ucb1x00_switches), GFP_KERNEL);
++ idev = input_allocate_device();
++
++ if (!switches || !idev) {
++ err = -ENOMEM;
++ goto fail;
++ }
++
++ switches->ucb = dev->ucb;
++
++ idev->private = switches;
++ idev->name = "SIMpad Switches";
++ idev->id.product = switches->ucb->id;
++
++ __set_bit(EV_KEY, idev->evbit);
++ __set_bit(EV_REP, idev->evbit);
++ __set_bit(KEY_PROG1, idev->keybit);
++ __set_bit(KEY_PROG2, idev->keybit);
++ __set_bit(KEY_UP, idev->keybit);
++ __set_bit(KEY_DOWN, idev->keybit);
++ __set_bit(KEY_LEFT, idev->keybit);
++ __set_bit(KEY_RIGHT, idev->keybit);
++
++ err = input_register_device(idev);
++ if (err)
++ goto fail;
++ switches->idev = idev;
++ dev->priv = switches;
++
++ ucb1x00_enable(switches->ucb);
++
++ ucb1x00_io_set_dir(switches->ucb,
++ UCB_IO_0 | UCB_IO_1 | UCB_IO_2 |
++ UCB_IO_3 | UCB_IO_4 | UCB_IO_5,
++ UCB_IO_8 | UCB_IO_9);
++
++ ucb1x00_disable(switches->ucb);
++
++ for (i = 0; i < 6; ++i) {
++ ucb1x00_enable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
++ if (ucb1x00_hook_irq(switches->ucb, i, ucb1x00_dev_irq, switches) < 0) {
++ printk(KERN_ERR "unable to hook IRQ for "
++ "UCB1300 SWITCH_%d\n", i);
++ return -EBUSY;
++ }
++ }
++
++ return 0;
++
++fail:
++ input_free_device(idev);
++ kfree(switches);
++ return err;
++
++}
++
++static void ucb1x00_switches_remove(struct ucb1x00_dev *dev)
++{
++ int i;
++ struct ucb1x00_switches *switches = dev->priv;
++ input_unregister_device(switches->idev);
++
++ for (i = 5; i >= 0; --i) {
++ ucb1x00_disable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
++
++ /* Only error conditions are ENOENT and EINVAL; silently
++ * ignore:
++ */
++ ucb1x00_free_irq(switches->ucb, i, NULL);
++ }
++ ucb1x00_disable(switches->ucb);
++ kfree(switches);
++}
++
++static struct ucb1x00_driver ucb1x00_switches_driver = {
++ .add = ucb1x00_switches_add,
++ .remove = ucb1x00_switches_remove,
++};
++
++static int __init ucb1x00_switches_init(void)
++{
++ return ucb1x00_register_driver(&ucb1x00_switches_driver);
++}
++
++static void __exit ucb1x00_switches_exit(void)
++{
++ ucb1x00_unregister_driver(&ucb1x00_switches_driver);
++}
++
++module_init(ucb1x00_switches_init);
++module_exit(ucb1x00_switches_exit);
++
++MODULE_AUTHOR("Bernhard Guillon <Bernhard.Guillon@opensimpad.org>");
++MODULE_DESCRIPTION("UCB1x00 Switches driver for Siemens SIMpad");
++MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux/simpad/linux-2.6.21-pcmcia-device-to-platform-driver.patch b/packages/linux/linux/simpad/linux-2.6.21-pcmcia-device-to-platform-driver.patch
new file mode 100644
index 0000000000..e6233cbe30
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-pcmcia-device-to-platform-driver.patch
@@ -0,0 +1,54 @@
+diff -uNr linux-2.6.21.vanilla/drivers/pcmcia/sa1100_generic.c linux-2.6.21/drivers/pcmcia/sa1100_generic.c
+--- linux-2.6.21.vanilla/drivers/pcmcia/sa1100_generic.c 2007-05-01 16:40:46.000000000 +0200
++++ linux-2.6.21/drivers/pcmcia/sa1100_generic.c 2007-05-01 19:38:05.000000000 +0200
+@@ -28,6 +28,9 @@
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
++ 2007 mrnice: added thesings changes from device_driver
++ to platform_driver - many thx to thesing
++
+ ======================================================================*/
+
+ #include <linux/module.h>
+@@ -81,13 +84,15 @@
+ return ret;
+ }
+
+-static struct device_driver sa11x0_pcmcia_driver = {
+- .probe = sa11x0_drv_pcmcia_probe,
+- .remove = soc_common_drv_pcmcia_remove,
+- .name = "sa11x0-pcmcia",
+- .bus = &platform_bus_type,
+- .suspend = pcmcia_socket_dev_suspend,
+- .resume = pcmcia_socket_dev_resume,
++static struct platform_driver sa11x0_pcmcia_driver = {
++ .driver = {
++ .name = "sa11x0-pcmcia",
++ .probe = sa11x0_drv_pcmcia_probe,
++ .remove = soc_common_drv_pcmcia_remove,
++ .suspend= pcmcia_socket_dev_suspend,
++ .resume = pcmcia_socket_dev_resume,
++ //.bus = &platform_bus_type,
++ },
+ };
+
+ /* sa11x0_pcmcia_init()
+@@ -100,7 +105,7 @@
+ */
+ static int __init sa11x0_pcmcia_init(void)
+ {
+- return driver_register(&sa11x0_pcmcia_driver);
++ return platform_driver_register(&sa11x0_pcmcia_driver);
+ }
+
+ /* sa11x0_pcmcia_exit()
+@@ -110,7 +115,7 @@
+ */
+ static void __exit sa11x0_pcmcia_exit(void)
+ {
+- driver_unregister(&sa11x0_pcmcia_driver);
++ platform_driver_unregister(&sa11x0_pcmcia_driver);
+ }
+
+ MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
diff --git a/packages/linux/linux_2.6.21.bb b/packages/linux/linux_2.6.21.bb
new file mode 100644
index 0000000000..d801f88507
--- /dev/null
+++ b/packages/linux/linux_2.6.21.bb
@@ -0,0 +1,23 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPL"
+
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
+ file://defconfig"
+
+SRC_URI_append_simpad = "\
+ file://linux-2.6.21-SIMpad-cs3-simpad.patch;patch=1 \
+ file://linux-2.6.21-SIMpad-mq200.patch;patch=1 \
+ file://linux-2.6.21-SIMpad-serial-and-gpio_keys.patch;patch=1 \
+ file://linux-2.6.21-SIMpad-ucb1x00-switches.patch;patch=1 \
+ file://linux-2.6.21-pcmcia-device-to-platform-driver.patch;patch=1 \
+ "
+
+inherit kernel
+
+KERNEL_IMAGETYPE_simpad = "zImage"
+
+do_configure_prepend() {
+ install -m 0644 ${WORKDIR}/defconfig ${S}/.config
+}
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 03:21:02 +0000