import clean BK tree at cset 1.3670

7 files changed, 453 insertions, 0 deletions

diff --git a/packages/linux/openslug-kernel-2.6.11.2/.mtn2git_empty b/packages/linux/openslug-kernel-2.6.11.2/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/linux/openslug-kernel-2.6.11.2/.mtn2git_empty
diff --git a/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch b/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch
index e69de29bb2..8d0f187d44 100644
--- a/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch
+++ b/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch
@@ -0,0 +1,27 @@
+--- linux-2.6.11/drivers/mtd/maps/ixp4xx.c.orig	2005-03-05 20:00:28.000000000 +0100
++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c	2005-03-05 22:10:48.000000000 +0100
+@@ -29,6 +29,8 @@
+ #include <asm/mach-types.h>
+ #include <asm/mach/flash.h>
+ 
++#include <asm/unaligned.h>
++
+ #include <linux/reboot.h>
+ 
+ #ifndef __ARMEB__
+@@ -60,13 +62,13 @@ static void ixp4xx_copy_from(struct map_
+ 	u16 data;
+ 
+ 	for (i = 0; i < (len / 2); i++) {
+-		data = src[i];
++		data = get_unaligned((u16*)(src + i));
+ 		dest[i * 2] = BYTE0(data);
+ 		dest[i * 2 + 1] = BYTE1(data);
+ 	}
+ 
+ 	if (len & 1)
+-		dest[len - 1] = BYTE0(src[i]);
++		dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i)));
+ }
+ 
+ /* 
diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c
index e69de29bb2..6fbf952e2a 100644
--- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c
+++ b/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c
@@ -0,0 +1,120 @@
+/*
+ * nslu2-part.c
+ *
+ * Maintainers: http://www.nslu2-linux.org/
+ * Initial port: Mark Rakes <mrakes AT mac.com>
+ *
+ * "Parse" the fixed partition table of the Linksys NSLU2 and
+ * produce a Linux partition array to match.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+/* info we know about the NSLU2's flash setup:
+ *
+ * Num	Partition		offset		size
+ * ---	---------		----------	-----------
+ * 0	RedBoot			0x00000000	0x00040000
+ * 1	System Configuration	0x00040000	0x00020000
+ * 2	Kernel			0x00060000	0x00100000
+ * 3	Ramdisk			0x00160000	0x006a0000
+ */
+ #define NSLU2_NUM_FLASH_PARTITIONS	4
+ #define NSLU2_FLASH_PART0_NAME		"RedBoot"
+ #define NSLU2_FLASH_PART0_OFFSET	0x00000000
+ #define NSLU2_FLASH_PART0_SIZE		0x00040000
+ #define NSLU2_FLASH_PART1_NAME		"System Configuration"
+ #define NSLU2_FLASH_PART1_OFFSET	(NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE)
+ #define NSLU2_FLASH_PART1_SIZE		0x00020000
+ #define NSLU2_FLASH_PART2_NAME		"Kernel"
+ #define NSLU2_FLASH_PART2_OFFSET	(NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE)
+ #define NSLU2_FLASH_PART2_SIZE		0x00100000
+ #define NSLU2_FLASH_PART3_NAME		"Ramdisk"
+ #define NSLU2_FLASH_PART3_OFFSET	(NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE)
+ #define NSLU2_FLASH_PART3_SIZE		0x006a0000
+
+static int parse_nslu2_partitions(struct mtd_info *master,
+                             struct mtd_partition **pparts,
+                             unsigned long flash_start)
+{
+	struct mtd_partition *parts;
+	int ret = 0, namelen = 0;
+	char *names;
+
+	namelen = strlen(NSLU2_FLASH_PART0_NAME) +
+		  strlen(NSLU2_FLASH_PART1_NAME) +
+		  strlen(NSLU2_FLASH_PART2_NAME) +
+		  strlen(NSLU2_FLASH_PART3_NAME) +
+		  NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */
+
+	parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL);
+	if (!parts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen);
+	names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS];
+
+	/* RedBoot partition */
+	parts[0].size	= NSLU2_FLASH_PART0_SIZE;
+	parts[0].offset	= NSLU2_FLASH_PART0_OFFSET;
+	parts[0].name	= NSLU2_FLASH_PART0_NAME;
+	parts[0].mask_flags = MTD_WRITEABLE; /* readonly */
+	strcpy(names, NSLU2_FLASH_PART0_NAME);
+	names += strlen(names)+1;
+	/* System Configuration */
+	parts[1].size	= NSLU2_FLASH_PART1_SIZE;
+	parts[1].offset	= NSLU2_FLASH_PART1_OFFSET;
+	parts[1].name	= NSLU2_FLASH_PART1_NAME;
+	parts[1].mask_flags = MTD_WRITEABLE; /* readonly */
+	strcpy(names, NSLU2_FLASH_PART1_NAME);
+	names += strlen(names)+1;
+	/* Kernel */
+	parts[2].size	= NSLU2_FLASH_PART2_SIZE;
+	parts[2].offset	= NSLU2_FLASH_PART2_OFFSET;
+	parts[2].name	= NSLU2_FLASH_PART2_NAME;
+	parts[2].mask_flags = MTD_WRITEABLE; /* readonly */
+	strcpy(names, NSLU2_FLASH_PART2_NAME);
+	names += strlen(names)+1;
+	/* Ramdisk */
+	parts[3].size	= NSLU2_FLASH_PART3_SIZE;
+	parts[3].offset	= NSLU2_FLASH_PART3_OFFSET;
+	parts[3].name	= NSLU2_FLASH_PART3_NAME;
+	parts[3].mask_flags = MTD_WRITEABLE; /* readonly */
+	strcpy(names, NSLU2_FLASH_PART3_NAME);
+	names += strlen(names)+1;
+
+	ret = NSLU2_NUM_FLASH_PARTITIONS;
+	*pparts = parts;
+ out:
+	return ret;
+}
+
+static struct mtd_part_parser nslu2_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_nslu2_partitions,
+	.name = "NSLU2",
+};
+
+static int __init nslu2_parser_init(void)
+{
+	return register_mtd_parser(&nslu2_parser);
+}
+
+static void __exit nslu2_parser_exit(void)
+{
+	deregister_mtd_parser(&nslu2_parser);
+}
+
+module_init(nslu2_parser_init);
+module_exit(nslu2_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Rakes");
+MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables");
diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c
index e69de29bb2..7327c65a4f 100644
--- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c
+++ b/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c
@@ -0,0 +1,87 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-pci.c
+ *
+ * NSLU2 board-level PCI initialization
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ
+// However, all the common PCI setup code presumes the standard 4 PCI
+// interrupts are available.  So we compromise...we don't enable the
+// IRQ on Pin 8 but we let
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+void __init nslu2_pci_preinit(void)
+{
+	gpio_line_config(NSLU2_PCI_INTA_PIN,
+				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	gpio_line_config(NSLU2_PCI_INTB_PIN,
+				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	gpio_line_config(NSLU2_PCI_INTC_PIN,
+				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+//	gpio_line_config(NSLU2_PCI_INTD_PIN,
+//				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+
+	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
+	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
+	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
+//	gpio_line_isr_clear(NSLU2_PCI_INTD_PIN);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
+		IRQ_NSLU2_PCI_INTA,
+		IRQ_NSLU2_PCI_INTB,
+		IRQ_NSLU2_PCI_INTC,
+//		IRQ_NSLU2_PCI_INTD
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
+		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
+		irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11
+	}
+
+	return irq;
+}
+
+struct hw_pci __initdata nslu2_pci = {
+	.nr_controllers = 1,
+	.preinit	= nslu2_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= nslu2_map_irq,
+};
+
+int __init nslu2_pci_init(void)		//monkey see, monkey do
+{
+	if (machine_is_nslu2())
+		pci_common_init(&nslu2_pci);
+	return 0;
+}
+
+subsys_initcall(nslu2_pci_init);
+
diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2.h b/packages/linux/openslug-kernel-2.6.11.2/nslu2.h
index e69de29bb2..bb79aaa007 100644
--- a/packages/linux/openslug-kernel-2.6.11.2/nslu2.h
+++ b/packages/linux/openslug-kernel-2.6.11.2/nslu2.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-arm/arch-ixp4xx/nslu2.h
+ *
+ * NSLU2 platform specific definitions
+ *
+ * Author: Mark Rakes <mrakes AT mac.com>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ
+// kas11 11-2-04
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define	NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define	NSLU2_SDA_PIN		7
+#define	NSLU2_SCL_PIN		6
+
+/*
+ * NSLU2 PCI IRQs
+ */
+#define NSLU2_PCI_MAX_DEV	3
+#define NSLU2_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN	11
+#define NSLU2_PCI_INTB_PIN	10
+#define	NSLU2_PCI_INTC_PIN	9
+//#define	NSLU2_PCI_INTD_PIN	8
+
+
diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch b/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch
index e69de29bb2..bff8400396 100644
--- a/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch
+++ b/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch
@@ -0,0 +1,159 @@
+diff -urN linux-2.6.11.orig/arch/arm/boot/compressed/head.S linux-2.6.11/arch/arm/boot/compressed/head.S
+--- linux-2.6.11.orig/arch/arm/boot/compressed/head.S	2005-03-01 21:38:25.000000000 -1000
++++ linux-2.6.11/arch/arm/boot/compressed/head.S	2005-03-03 00:55:05.000000000 -1000
+@@ -79,6 +79,14 @@
+ 		.endm
+ 		.macro	writeb, rb
+ 		str	\rb, [r3, #0]
++		.endm
++#elif defined(CONFIG_ARCH_NSLU2)
++		.macro	loadsp, rb
++		mov	\rb, #0xc8000000
++		.endm
++		.macro	writeb, rb
++		str	\rb, [r3, #0]
++		.endm
+ #elif defined(CONFIG_ARCH_IXP2000)
+ 		.macro	loadsp, rb
+ 		mov	\rb, #0xc0000000
+diff -urN linux-2.6.11.orig/arch/arm/boot/compressed/head-xscale.S linux-2.6.11/arch/arm/boot/compressed/head-xscale.S
+--- linux-2.6.11.orig/arch/arm/boot/compressed/head-xscale.S	2005-03-01 21:37:52.000000000 -1000
++++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S	2005-03-02 01:41:31.000000000 -1000
+@@ -47,3 +47,8 @@
+                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
+ #endif
+ 
++#ifdef CONFIG_ARCH_NSLU2
++               mov     r7, #(MACH_TYPE_NSLU2 & 0xff)
++               orr     r7, r7, #(MACH_TYPE_NSLU2 & 0xff00)
++#endif
++
+diff -urN linux-2.6.11.orig/arch/arm/mach-ixp4xx/Kconfig linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.11.orig/arch/arm/mach-ixp4xx/Kconfig	2005-03-01 21:37:49.000000000 -1000
++++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig	2005-03-02 01:43:42.000000000 -1000
+@@ -43,6 +43,12 @@
+ 	  IXDP465 Development Platform (Also known as BMP).
+ 	  For more information on this platform, see Documentation/arm/IXP4xx.
+ 
++config ARCH_NSLU2
++       bool "NSLU2"
++       help
++         Say 'Y' here if you want your kernel to support Linksys's 
++         NSLU2 NAS device. For more information on this platform, 
++         see http://www.nslu2-linux.org
+ 
+ #
+ # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
+diff -urN linux-2.6.11.orig/arch/arm/mach-ixp4xx/Makefile linux-2.6.11/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.11.orig/arch/arm/mach-ixp4xx/Makefile	2005-03-01 21:37:49.000000000 -1000
++++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile	2005-03-02 01:44:16.000000000 -1000
+@@ -9,4 +9,4 @@
+ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_PRPMC1100)	+= prpmc1100-pci.o prpmc1100-setup.o
+ obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
+-
++obj-$(CONFIG_ARCH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o
+diff -urN linux-2.6.11.orig/arch/arm/tools/mach-types linux-2.6.11/arch/arm/tools/mach-types
+--- linux-2.6.11.orig/arch/arm/tools/mach-types	2005-03-01 21:38:08.000000000 -1000
++++ linux-2.6.11/arch/arm/tools/mach-types	2005-03-02 01:44:50.000000000 -1000
+@@ -604,7 +604,7 @@
+ roverp7			MACH_ROVERP7		ROVERP7			594
+ pr818s			MACH_PR818S		PR818S			595
+ trxpro			MACH_TRXPRO		TRXPRO			596
+-nslu2			MACH_NSLU2		NSLU2			597
++nslu2			ARCH_NSLU2		NSLU2			597
+ e400			MACH_E400		E400			598
+ trab			MACH_TRAB		TRAB			599
+ cmc_pu2			MACH_CMC_PU2		CMC_PU2			600
+diff -urN linux-2.6.11.orig/drivers/i2c/chips/Kconfig linux-2.6.11/drivers/i2c/chips/Kconfig
+--- linux-2.6.11.orig/drivers/i2c/chips/Kconfig	2005-03-01 21:38:10.000000000 -1000
++++ linux-2.6.11/drivers/i2c/chips/Kconfig	2005-03-02 01:45:28.000000000 -1000
+@@ -370,5 +370,14 @@
+ 	  
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called isp1301_omap.
++config SENSORS_X1205
++       tristate "Xicor X1205 RTC chip"
++       depends on I2C && EXPERIMENTAL
++       select I2C_SENSOR
++       help
++         If you say yes here you get support for the Xicor x1205 RTC chip.
++ 
++         This driver can also be built as a module.  If so, the module
++         will be called x1205-rtc
+ 
+ endmenu
+diff -urN linux-2.6.11.orig/drivers/i2c/chips/Makefile linux-2.6.11/drivers/i2c/chips/Makefile
+--- linux-2.6.11.orig/drivers/i2c/chips/Makefile	2005-03-01 21:38:34.000000000 -1000
++++ linux-2.6.11/drivers/i2c/chips/Makefile	2005-03-02 01:45:54.000000000 -1000
+@@ -35,6 +35,7 @@
+ obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
+ obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
+ obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
++obj-$(CONFIG_SENSORS_X1205)     += x1205-rtc.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -urN linux-2.6.11.orig/drivers/mtd/maps/ixp4xx.c linux-2.6.11/drivers/mtd/maps/ixp4xx.c
+--- linux-2.6.11.orig/drivers/mtd/maps/ixp4xx.c	2005-03-01 21:37:30.000000000 -1000
++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c	2005-03-02 01:46:40.000000000 -1000
+@@ -94,7 +94,11 @@
+ 	struct resource *res;
+ };
+ 
++#ifdef CONFIG_ARCH_NSLU2
++static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL };
++#else
+ static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
++#endif
+ 
+ static int ixp4xx_flash_remove(struct device *_dev)
+ {
+diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h
+--- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/hardware.h	2005-03-01 21:37:51.000000000 -1000
++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h	2005-03-02 17:34:46.000000000 -1000
+@@ -44,5 +44,6 @@
+ #include "ixdp425.h"
+ #include "coyote.h"
+ #include "prpmc1100.h"
++#include "nslu2.h"
+ 
+ #endif  /* _ASM_ARCH_HARDWARE_H */
+diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h
+--- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/irqs.h	2005-03-01 21:38:12.000000000 -1000
++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h	2005-03-02 01:49:27.000000000 -1000
+@@ -93,4 +93,11 @@
+ #define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+ #define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+ 
++/*
++ * NSLU2 board IRQs
++ */
++#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
++#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
++#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
++
+ #endif
+diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+--- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h	2005-03-01 21:37:49.000000000 -1000
++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h	2005-03-03 02:26:29.231822000 -1000
+@@ -52,7 +52,7 @@
+  * Expansion BUS Configuration registers
+  */
+ #define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
+-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFD000)
++#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
+ #define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+ 
+ /*
+diff -urN linux-2.6.11.orig/include/linux/i2c-id.h linux-2.6.11/include/linux/i2c-id.h
+--- linux-2.6.11.orig/include/linux/i2c-id.h	2005-03-01 21:38:34.000000000 -1000
++++ linux-2.6.11/include/linux/i2c-id.h	2005-03-02 01:50:14.000000000 -1000
+@@ -110,6 +110,7 @@
+ #define I2C_DRIVERID_TDA7313	62	/* TDA7313 audio processor	*/
+ #define I2C_DRIVERID_MAX6900	63	/* MAX6900 real-time clock	*/
+ #define I2C_DRIVERID_SAA7114H	64	/* video decoder		*/
++#define I2C_DRIVERID_X1205	0xF0
+ 
+ 
+ #define I2C_DRIVERID_EXP0	0xF0	/* experimental use id's	*/
diff --git a/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch b/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch
index e69de29bb2..1b3cf3fcb8 100644
--- a/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch
+++ b/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch
@@ -0,0 +1,17 @@
+--- linux-2.6.11/drivers/usb/net/usbnet.c_orig	2005-03-03 13:50:54.053237416 -0500
++++ linux-2.6.11/drivers/usb/net/usbnet.c	2005-03-03 13:53:19.415139048 -0500
+@@ -2404,12 +2404,13 @@
+ #endif
+ 		size = (sizeof (struct ethhdr) + dev->net->mtu);
+ 
+-	if ((skb = alloc_skb (size, flags)) == NULL) {
++	if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
+ 		devdbg (dev, "no rx skb");
+ 		defer_kevent (dev, EVENT_RX_MEMORY);
+ 		usb_free_urb (urb);
+ 		return;
+ 	}
++	skb_reserve (skb, NET_IP_ALIGN);
+ 
+ 	entry = (struct skb_data *) skb->cb;
+ 	entry->urb = urb;