rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 267 deletions

diff --git a/packages/linux/opensimpad/simpad-serial.patch b/packages/linux/opensimpad/simpad-serial.patch
deleted file mode 100644
index e54c682a06..0000000000
--- a/packages/linux/opensimpad/simpad-serial.patch
+++ /dev/null
@@ -1,267 +0,0 @@
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- linux-2.4.27/include/asm-arm/arch-sa1100/simpad.h~simpad-serial
-+++ linux-2.4.27/include/asm-arm/arch-sa1100/simpad.h
-@@ -16,7 +16,7 @@
- #error "include <asm/hardware.h> instead"
- #endif
- 
--#define GPIO_UART1_RTS	GPIO_GPIO14
-+#define GPIO_UART1_RTS	GPIO_GPIO9
- #define GPIO_UART1_DTR	GPIO_GPIO7
- #define GPIO_UART1_CTS	GPIO_GPIO8
- #define GPIO_UART1_DCD	GPIO_GPIO23
-@@ -31,12 +31,12 @@
- #define GPIO_POWER_BUTTON       GPIO_GPIO0
- #define GPIO_UCB1300_IRQ	GPIO_GPIO (22)	/* UCB GPIO and touchscreen */
- 
--#define IRQ_UART1_CTS	IRQ_GPIO15
--#define IRQ_UART1_DCD	GPIO_GPIO23
--#define IRQ_UART1_DSR	GPIO_GPIO6
--#define IRQ_UART3_CTS	GPIO_GPIO13
--#define IRQ_UART3_DCD	GPIO_GPIO18
--#define IRQ_UART3_DSR	GPIO_GPIO17
-+#define IRQ_GPIO_UART1_CTS	IRQ_GPIO8
-+#define IRQ_GPIO_UART1_DCD	IRQ_GPIO23
-+#define IRQ_GPIO_UART1_DSR	IRQ_GPIO6
-+#define IRQ_GPIO_UART3_CTS	IRQ_GPIO13
-+#define IRQ_GPIO_UART3_DCD	IRQ_GPIO18
-+#define IRQ_GPIO_UART3_DSR	IRQ_GPIO17
- 
- #define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
- #define IRQ_GPIO_POWER_BUTTON    IRQ_GPIO0
---- linux-2.4.27/arch/arm/mach-sa1100/simpad.c~simpad-serial
-+++ linux-2.4.27/arch/arm/mach-sa1100/simpad.c
-@@ -22,9 +22,11 @@
- 
- #include "generic.h"
- 
-+#undef SIMPAD_UART_USE_IRQ  // irq handling on CTS/DCD doesn't work yet
-+
- long cs3_shadow;
- 
--long get_cs3_shadow()
-+long get_cs3_shadow(void)
- {
- 	return cs3_shadow;
- }
-@@ -107,18 +109,170 @@
-   LAST_DESC
- };
- 
-+#define SER_INFO(fmt, arg...) printk(KERN_INFO fmt "\n" , ## arg)
-+
-+static void simpad_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-+{
-+	if (port->mapbase == _Ser1UTCR0) {
-+	        /* internal serial port (ttySA1, DECT/Bluetooth) */
-+		if (mctrl & TIOCM_RTS)	GPCR = GPIO_UART1_RTS;
-+		else			GPSR = GPIO_UART1_RTS;
-+
-+		if (mctrl & TIOCM_DTR)	GPCR = GPIO_UART1_DTR;
-+		else			GPSR = GPIO_UART1_DTR;
-+	}
-+
-+	else if (port->mapbase == _Ser3UTCR0) {
-+	        /* external serial port (ttySA0, RS232) */
-+	        if (mctrl & TIOCM_RTS)  GPCR = GPIO_UART3_RTS;
-+		else			GPSR = GPIO_UART3_RTS;
-+
-+	        if (mctrl & TIOCM_DTR)  GPCR = GPIO_UART3_DTR;
-+		else			GPSR = GPIO_UART3_DTR;
-+	}
-+}
-+
-+static u_int simpad_uart_get_mctrl(struct uart_port *port)
-+{
-+	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-+
-+	if (port->mapbase == _Ser1UTCR0) {
-+	        /* internal serial port (ttySA1, DECT/Bluetooth) */
-+		int gplr = GPLR;
-+		if (gplr & GPIO_UART1_DCD) ret &= ~TIOCM_CD;
-+		if (gplr & GPIO_UART1_CTS) ret &= ~TIOCM_CTS;
-+		if (gplr & GPIO_UART1_DSR) ret &= ~TIOCM_DSR;
-+	}
-+
-+	else if (port->mapbase == _Ser3UTCR0) {
-+	        /* external serial port (ttySA0, RS232) */
-+		int gplr = GPLR;
-+		if (gplr & GPIO_UART3_DCD) ret &= ~TIOCM_CD;
-+		if (gplr & GPIO_UART3_CTS) ret &= ~TIOCM_CTS;
-+		if (gplr & GPIO_UART3_DSR) ret &= ~TIOCM_DSR;
-+	}
-+	return ret;
-+}
-+
- static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
- {
--	if (port->mapbase == (u_int)&Ser1UTCR0) {
-+	if (port->mapbase == (u_int)&Ser3UTCR0) {
- 		if (state)
- 			clear_cs3_bit(RS232_ON);
- 		else
- 			set_cs3_bit(RS232_ON);
- 	}
- }
-+/*
-+ * Enable/Disable wake up events for this serial port.
-+ * Obviously, we only support this on the normal COM port.
-+ */
-+static int simpad_uart_set_wake(struct uart_port *port, u_int enable)
-+{
-+	int err = -EINVAL;
-+
-+#if 0  // TODO: port management
-+	if (port->mapbase == _Ser3UTCR0) {
-+		if (enable)
-+			PWER |= PWER_GPIO23 | PWER_GPIO25 ; /* DCD and CTS */
-+		else
-+			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
-+		err = 0;
-+	}
-+#endif
-+
-+	return err;
-+}
-+
-+#ifdef SIMPAD_UART_USE_IRQ
-+static void simpad_uart1_dcd_intr(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_port *port = dev_id;
-+	/* Note: should only call this if something has changed */
-+	uart_handle_dcd_change(port, !(GPLR & GPIO_UART1_DCD));
-+}
-+
-+static void simpad_uart1_cts_intr(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_port *port = dev_id;
-+	/* Note: should only call this if something has changed */
-+	uart_handle_cts_change(port, !(GPLR & GPIO_UART1_CTS));
-+}
-+
-+static void simpad_uart3_dcd_intr(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_port *port = dev_id;
-+	/* Note: should only call this if something has changed */
-+	uart_handle_dcd_change(port, !(GPLR & GPIO_UART3_DCD));
-+}
-+
-+static void simpad_uart3_cts_intr(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_port *port = dev_id;
-+	/* Note: should only call this if something has changed */
-+	uart_handle_cts_change(port, !(GPLR & GPIO_UART3_CTS));
-+}
-+#endif
-+
-+static int simpad_uart_open(struct uart_port *port)
-+{
-+	int ret = 0;
-+#ifdef SIMPAD_UART_USE_IRQ
-+	if (port->mapbase == _Ser1UTCR0) {
-+		set_GPIO_IRQ_edge(GPIO_UART1_DCD|GPIO_UART1_CTS,
-+				  GPIO_BOTH_EDGES);
-+
-+		ret = request_irq(IRQ_GPIO_UART1_DCD, simpad_uart1_dcd_intr,
-+				  0, "UART1 DCD", port);
-+		if (ret)
-+			return ret;
-+
-+		ret = request_irq(IRQ_GPIO_UART1_CTS, simpad_uart1_cts_intr,
-+				  0, "UART1 CTS", port);
-+		if (ret)
-+			free_irq(IRQ_GPIO_UART1_DCD, port);
-+	}
-+
-+	else if (port->mapbase == _Ser3UTCR0) {
-+		set_GPIO_IRQ_edge(GPIO_UART3_DCD|GPIO_UART3_CTS,
-+				  GPIO_BOTH_EDGES);
-+
-+		ret = request_irq(IRQ_GPIO_UART3_DCD, simpad_uart3_dcd_intr,
-+				  0, "UART3 DCD", port);
-+		if (ret)
-+			return ret;
-+
-+		ret = request_irq(IRQ_GPIO_UART3_CTS, simpad_uart3_cts_intr,
-+				  0, "UART3 CTS", port);
-+		if (ret)
-+			free_irq(IRQ_GPIO_UART3_DCD, port);
-+	}
-+#endif
-+	return ret;
-+}
-+
-+static void simpad_uart_close(struct uart_port *port)
-+{
-+#ifdef SIMPAD_UART_USE_IRQ
-+	if (port->mapbase == _Ser1UTCR0) {
-+		free_irq(IRQ_GPIO_UART1_DCD, port);
-+		free_irq(IRQ_GPIO_UART1_CTS, port);
-+	}
-+
-+	else if (port->mapbase == _Ser3UTCR0) {
-+		free_irq(IRQ_GPIO_UART3_DCD, port);
-+		free_irq(IRQ_GPIO_UART3_CTS, port);
-+	}
-+#endif
-+}
- 
- static struct sa1100_port_fns simpad_port_fns __initdata = {
--	.pm	= simpad_uart_pm,
-+	.set_mctrl	= simpad_uart_set_mctrl,
-+	.get_mctrl	= simpad_uart_get_mctrl,
-+	.pm	        = simpad_uart_pm,
-+	.set_wake	= simpad_uart_set_wake,
-+	.open		= simpad_uart_open,
-+	.close		= simpad_uart_close,
- };
- 
- static void __init simpad_map_io(void)
-@@ -129,13 +283,32 @@
-         set_cs3_bit (EN1 | EN0 | LED2_ON | DISPLAY_ON | RS232_ON |
-                       ENABLE_5V | nRESET_SIMCARD);
- 
-+	sa1100_register_uart_fns(&simpad_port_fns);
-+
-         //It is only possible to register 3 UART in serial_sa1100.c
-         sa1100_register_uart(0, 3);
-         sa1100_register_uart(1, 1);
- 
-+	// txd and rxd use their alternate function
- 	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-+
-+	// the control lines are gpio
-+	GAFR &= ~(GPIO_UART1_RTS | GPIO_UART1_CTS | GPIO_UART1_DCD);
-+	GAFR &= ~(GPIO_UART1_DSR | GPIO_UART1_DTR);
-+	GAFR &= ~(GPIO_UART3_RTS | GPIO_UART3_CTS | GPIO_UART3_DCD);
-+	GAFR &= ~(GPIO_UART3_DSR | GPIO_UART3_DTR);
-+
-+	// txd, rts and dtr are outputs
- 	GPDR |= GPIO_UART_TXD;
-+	GPDR |= GPIO_UART1_RTS | GPIO_UART3_RTS;
-+	GPDR |= GPIO_UART1_DTR | GPIO_UART3_DTR;
-+
-+	// cts, dcd, dsr and rxd are inputs
-+	GPDR &= ~(GPIO_UART1_CTS | GPIO_UART3_CTS);
-+	GPDR &= ~(GPIO_UART1_DCD | GPIO_UART3_DCD);
-+	GPDR &= ~(GPIO_UART1_DSR | GPIO_UART3_DSR);
- 	GPDR &= ~GPIO_UART_RXD;
-+
- 	PPAR |= PPAR_UPR;
- 
-         set_GPIO_IRQ_edge(GPIO_UCB1300_IRQ, GPIO_RISING_EDGE);
---- linux-2.4.27/drivers/video/mq200fb.c~simpad-serial
-+++ linux-2.4.27/drivers/video/mq200fb.c
-@@ -672,7 +672,7 @@
- 
- #ifdef CONFIG_SA1100_SIMPAD
-     GPDR |=   (1<<3);
--    GAFR |=  ~(1<<3);
-+    GAFR &=  ~(1<<3);
-     GPSR |=   (1<<3);
- #endif
-