nslu2-kernel 2.6.14: latest patch set, includes LE patches

5 files changed, 405 insertions, 311 deletions

diff --git a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch
index a4923de72d..b01b60e941 100644
--- a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch
+++ b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-general.patch
@@ -1,16 +1,125 @@
-diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/Makefile test3/arch/arm/mach-ixp4xx/Makefile
 --- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/Makefile	2005-09-17 12:42:02.000000000 +0200
-+++ test3/arch/arm/mach-ixp4xx/Makefile	2005-09-24 13:21:35.000000000 +0200
++++ test5/arch/arm/mach-ixp4xx/Makefile	2005-09-27 19:13:04.000000000 +0200
 @@ -8,4 +8,5 @@
  obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
  obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
  obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
 +obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-io.o nslu2-rtc.o
  
-diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c test3/arch/arm/mach-ixp4xx/nslu2-io.c
+--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-rtc.c	1970-01-01 01:00:00.000000000 +0100
++++ test5/arch/arm/mach-ixp4xx/nslu2-rtc.c	2005-09-24 19:07:37.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-rtc.c
++ *
++ * NSL2 RTC driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on x1205-rtc.c  
++ *  Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/time.h>
++#include <linux/rtc.h>
++#include <linux/init.h>
++
++#include <linux/x1205.h>
++
++#include <asm/rtc.h>
++
++
++extern int (*set_rtc)(void);
++
++static int nslu2_set_rtc(void)
++{
++	struct rtc_time new_tm, old_tm;
++	unsigned long cur_secs = xtime.tv_sec;
++
++	if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
++		return 0;
++
++	/* FIXME      xtime.tv_nsec = old_tm.tm_sec * 10000000; */
++	new_tm.tm_sec  = cur_secs % 60;
++	cur_secs /= 60;
++	new_tm.tm_min  = cur_secs % 60;
++	cur_secs /= 60;
++	new_tm.tm_hour = cur_secs % 24;
++
++       /*
++	* avoid writing when we're going to change the day
++	* of the month.  We will retry in the next minute.
++	* This basically means that if the RTC must not drift
++	* by more than 1 minute in 11 minutes.
++	*/
++	if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
++	    (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
++		return 1;
++
++	return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
++}
++
++static int rtc_read_alarm(struct rtc_wkalrm *alrm)
++{
++	return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
++}
++
++static inline int rtc_set_alarm(struct rtc_wkalrm *alrm)
++{
++	return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
++}
++
++static int rtc_read_time(struct rtc_time *tm)
++{
++	return x1205_do_command(X1205_CMD_GETDATETIME, tm);
++}
++
++static int rtc_set_time(struct rtc_time *tm)
++{
++	return x1205_do_command(X1205_CMD_SETDATETIME, tm);
++}
++
++static struct rtc_ops rtc_ops = {
++	.owner		= THIS_MODULE,
++	.read_time	= rtc_read_time,
++	.set_time	= rtc_set_time,
++	.read_alarm	= rtc_read_alarm,
++	.set_alarm	= rtc_set_alarm,
++};
++
++static int __init nslu2_rtc_init(void)
++{
++	int ret = register_rtc(&rtc_ops);
++
++	if (ret)
++		return ret;
++
++	set_rtc = nslu2_set_rtc;
++
++	return 0;
++}
++
++static void __exit nslu2_rtc_exit(void)
++{
++	set_rtc = NULL;
++
++	unregister_rtc(&rtc_ops);
++}
++
++module_init(nslu2_rtc_init);
++module_exit(nslu2_rtc_exit);
 --- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c	1970-01-01 01:00:00.000000000 +0100
-+++ test3/arch/arm/mach-ixp4xx/nslu2-io.c	2005-09-24 15:44:08.000000000 +0200
-@@ -0,0 +1,696 @@
++++ test5/arch/arm/mach-ixp4xx/nslu2-io.c	2005-09-27 19:24:44.000000000 +0200
+@@ -0,0 +1,683 @@
 +//=============================================================================
 +//
 +// n2-io.c version 0.1.7
@@ -86,19 +195,6 @@ diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c test3/arch/arm/mach-i
 +#define NSLU2_BEEP_PITCH_LOW	1000
 +#define NSLU2_LONG_DELAY	30000
 +
-+#define NSLU2_BZ_GPIO		4
-+#define NSLU2_PB_GPIO		5
-+#define NSLU2_PO_GPIO		8		//power off
-+#define NSLU2_RB_GPIO		12
-+
-+#define NSLU2_PB_IRQ		22		//gpio5
-+#define	NSLU2_RB_IRQ		29		//gpio12
-+
-+#define GPIO_BZ_BM		0x0010	//b0000 0000 0001 0000
-+#define GPIO_PB_BM		0x0020	//b0000 0000 0010 0000
-+#define GPIO_PO_BM		0x0100  //b0000 0001 0000 0000
-+#define GPIO_RB_BM		0x1000	//b0001 0000 0000 0000
-+
 +#define RB_DELAY		50
 +#define PB_DELAY		20
 +
@@ -416,15 +512,15 @@ diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c test3/arch/arm/mach-i
 +{
 +	int i;
 +
-+	*IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM;
++	*IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
 +		
 +	for (i = 1; i < duration; i++) {
-+		*IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM;
++		*IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
 +		udelay(tone_delay);
-+		*IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM;
++		*IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
 +		udelay(tone_delay);
 +	}
-+	*IXP4XX_GPIO_GPOER |= GPIO_BZ_BM;
++	*IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
 +
 +	return;
 +}
@@ -707,209 +803,9 @@ diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-io.c test3/arch/arm/mach-i
 +module_param(debug, int, 0644);
 +MODULE_PARM_DESC(debug, "Debugging enabled = 8");
 +
-diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-pci.c test3/arch/arm/mach-ixp4xx/nslu2-pci.c
---- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-pci.c	1970-01-01 01:00:00.000000000 +0100
-+++ test3/arch/arm/mach-ixp4xx/nslu2-pci.c	2005-09-24 15:19:54.000000000 +0200
-@@ -0,0 +1,83 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-pci.c
-+ *
-+ * NSLU2 board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ *	Copyright (C) 2002 Intel Corporation.
-+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ
-+// However, all the common PCI setup code presumes the standard 4 PCI
-+// interrupts are available.  So we compromise...we don't enable the
-+// IRQ on Pin 8 but we let
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/irq.h>
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+
-+void __init nslu2_pci_preinit(void)
-+{
-+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
-+
-+	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-+	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-+	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-+
-+	/* INTD is not configured. Unused? */
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-+		IRQ_NSLU2_PCI_INTA,
-+		IRQ_NSLU2_PCI_INTB,
-+		IRQ_NSLU2_PCI_INTC,
-+	};
-+
-+	int irq = -1;
-+
-+	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-+		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-+			irq = pci_irq_table[
-+				(slot + pin - 2) % 3];
-+	}
-+
-+	return irq;
-+}
-+
-+struct hw_pci __initdata nslu2_pci = {
-+	.nr_controllers = 1,
-+	.preinit	= nslu2_pci_preinit,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= ixp4xx_setup,
-+	.scan		= ixp4xx_scan_bus,
-+	.map_irq	= nslu2_map_irq,
-+};
-+
-+int __init nslu2_pci_init(void) /* monkey see, monkey do */
-+{
-+	if (machine_is_nslu2())
-+		pci_common_init(&nslu2_pci);
-+
-+	return 0;
-+}
-+
-+subsys_initcall(nslu2_pci_init);
-diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-rtc.c test3/arch/arm/mach-ixp4xx/nslu2-rtc.c
---- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-rtc.c	1970-01-01 01:00:00.000000000 +0100
-+++ test3/arch/arm/mach-ixp4xx/nslu2-rtc.c	2005-09-24 17:35:55.000000000 +0200
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-rtc.c
-+ *
-+ * NSL2 RTC driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on x1205-rtc.c  
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/time.h>
-+#include <linux/rtc.h>
-+#include <linux/init.h>
-+
-+#include <linux/x1205.h>
-+
-+#include <asm/rtc.h>
-+
-+
-+extern int (*set_rtc)(void);
-+
-+static int nslu2_set_rtc(void)
-+{
-+	struct rtc_time new_tm, old_tm;
-+	unsigned long cur_secs = xtime.tv_sec;
-+
-+	if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
-+		return 0;
-+
-+	/* FIXME      xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+	new_tm.tm_sec  = cur_secs % 60;
-+	cur_secs /= 60;
-+	new_tm.tm_min  = cur_secs % 60;
-+	cur_secs /= 60;
-+	new_tm.tm_hour = cur_secs % 24;
-+
-+       /*
-+	* avoid writing when we're going to change the day
-+	* of the month.  We will retry in the next minute.
-+	* This basically means that if the RTC must not drift
-+	* by more than 1 minute in 11 minutes.
-+	*/
-+	if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+	    (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+		return 1;
-+
-+	return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
-+}
-+
-+static int rtc_read_alarm(struct rtc_wkalrm *alrm)
-+{
-+	return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
-+}
-+
-+static inline int rtc_set_alarm(struct rtc_wkalrm *alrm)
-+{
-+	return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
-+}
-+
-+static int rtc_read_time(struct rtc_time *tm)
-+{
-+	return x1205_do_command(X1205_CMD_GETDATETIME, tm);
-+}
-+
-+static int rtc_set_time(struct rtc_time *tm)
-+{
-+	return x1205_do_command(X1205_CMD_SETDATETIME, tm);
-+}
-+
-+static struct rtc_ops rtc_ops = {
-+	.owner		= THIS_MODULE,
-+	.read_time	= rtc_read_time,
-+	.set_time	= rtc_set_time,
-+	.read_alarm	= rtc_read_alarm,
-+	.set_alarm	= rtc_set_alarm,
-+};
-+
-+static int __init nslu2_rtc_init(void)
-+{
-+	int ret = register_rtc(&rtc_ops);
-+
-+	if (ret)
-+		return ret;
-+
-+	set_rtc = nslu2_set_rtc;
-+
-+	return 0;
-+}
-+
-+static void __exit nslu2_rtc_exit(void)
-+{
-+	set_rtc = NULL;
-+
-+	unregister_rtc(&rtc_ops);
-+}
-+
-+module_init(nslu2_rtc_init);
-+module_exit(nslu2_rtc_exit);
-diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c test3/arch/arm/mach-ixp4xx/nslu2-setup.c
 --- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ test3/arch/arm/mach-ixp4xx/nslu2-setup.c	2005-09-24 17:27:31.000000000 +0200
-@@ -0,0 +1,145 @@
++++ test5/arch/arm/mach-ixp4xx/nslu2-setup.c	2005-09-27 19:37:02.000000000 +0200
+@@ -0,0 +1,131 @@
 +/*
 + * arch/arm/mach-ixp4xx/nslu2-setup.c
 + *
@@ -926,54 +822,42 @@ diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c test3/arch/arm/mac
 + */
 +
 +#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
 +#include <linux/serial.h>
-+#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
 +#include <asm/mach-types.h>
-+#include <asm/irq.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data nslu2_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
++	.map_name		= "cfi_probe",
++	.width			= 2,
 +};
 +
 +static struct resource nslu2_flash_resource = {
-+	.start		= NSLU2_FLASH_BASE,
-+	.end		= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-+	.flags		= IORESOURCE_MEM,
++	.start			= NSLU2_FLASH_BASE,
++	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
++	.flags			= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device nslu2_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &nslu2_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &nslu2_flash_resource,
++	.name			= "IXP4XX-Flash",
++	.id			= 0,
++	.dev.platform_data	= &nslu2_flash_data,
++	.num_resources		= 1,
++	.resource		= &nslu2_flash_resource,
 +};
 +
 +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+	.sda_pin	= NSLU2_SDA_PIN,
-+	.scl_pin	= NSLU2_SCL_PIN,
++	.sda_pin		= NSLU2_SDA_PIN,
++	.scl_pin		= NSLU2_SCL_PIN,
 +};
 +
 +static struct platform_device nslu2_i2c_controller = {
-+	.name		= "IXP4XX-I2C",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &nslu2_i2c_gpio_pins,
-+	},
-+	.num_resources	= 0
++	.name			= "IXP4XX-I2C",
++	.id			= 0,
++	.dev.platform_data	= &nslu2_i2c_gpio_pins,
++	.num_resources		= 0
 +};
 +
 +static struct resource nslu2_uart_resources[] = {
@@ -1025,22 +909,20 @@ diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c test3/arch/arm/mac
 +	&nslu2_uart
 +};
 +
-+static void n2_power_off(void)
++static void nslu2_power_off(void)
 +{
 +        /* This causes the box to drop the power and go dead. */
-+#define GPIO_PO_BM              0x0100  //b0000 0001 0000 0000
-+        *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM;	/* enable the pwr cntl gpio */
-+        *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM;      /* do the deed */
++
++        *IXP4XX_GPIO_GPOER &= ~NSLU2_PO_BM;	/* enable the pwr cntl gpio */
++        *IXP4XX_GPIO_GPOUTR |= NSLU2_PO_BM;	/* do the deed */
 +}
 +
 +static void __init nslu2_init(void)
 +{
-+	/* NSLU2 has a 33.00 MHZ crystal, we need to cope with that */
-+/*	ixp4xx_ticks_per_usec = NSLU2_CLOCK_TICKS_PER_USEC;*/
-+
 +	ixp4xx_sys_init();
 +
-+	pm_power_off = n2_power_off;
++	pm_power_off = nslu2_power_off;
++
 +	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
 +}
 +
@@ -1055,3 +937,149 @@ diff -urN linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-setup.c test3/arch/arm/mac
 +        .timer          = &ixp4xx_timer,
 +	.init_machine	= nslu2_init,
 +MACHINE_END
+--- linux-2.6.14-rc2/arch/arm/mach-ixp4xx/nslu2-pci.c	1970-01-01 01:00:00.000000000 +0100
++++ test5/arch/arm/mach-ixp4xx/nslu2-pci.c	2005-09-27 19:57:17.000000000 +0200
+@@ -0,0 +1,78 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-pci.c
++ *
++ * NSLU2 board-level PCI initialization
++ *
++ * based on ixdp425-pci.c:
++ *	Copyright (C) 2002 Intel Corporation.
++ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init nslu2_pci_preinit(void)
++{
++	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
++	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
++	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
++
++	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
++	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
++	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
++
++	/* INTD is not configured as GPIO is used
++	 * for the power input button.
++	 */
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
++		IRQ_NSLU2_PCI_INTA,
++		IRQ_NSLU2_PCI_INTB,
++		IRQ_NSLU2_PCI_INTC,
++	};
++
++	int irq = -1;
++
++	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
++		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
++			irq = pci_irq_table[
++				(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
++	}
++
++	return irq;
++}
++
++struct hw_pci __initdata nslu2_pci = {
++	.nr_controllers = 1,
++	.preinit	= nslu2_pci_preinit,
++	.swizzle	= pci_std_swizzle,
++	.setup		= ixp4xx_setup,
++	.scan		= ixp4xx_scan_bus,
++	.map_irq	= nslu2_map_irq,
++};
++
++int __init nslu2_pci_init(void) /* monkey see, monkey do */
++{
++	if (machine_is_nslu2())
++		pci_common_init(&nslu2_pci);
++
++	return 0;
++}
++
++subsys_initcall(nslu2_pci_init);
+--- linux-2.6.14-rc2/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 01:00:00.000000000 +0100
++++ test5/include/asm-arm/arch-ixp4xx/nslu2.h	2005-09-27 20:01:59.000000000 +0200
+@@ -0,0 +1,62 @@
++/*
++ * include/asm-arm/arch-ixp4xx/nslu2.h
++ *
++ * NSLU2 platform specific definitions
++ *
++ * Author: Mark Rakes <mrakes AT mac.com>
++ * Maintainers: http://www.nslu2-linux.org
++ *
++ * based on ixdp425.h:
++ *	Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * This file is licensed under  the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++// GPIO 8 is used as the power input so is not free for use as a PCI IRQ
++// kas11 11-2-04
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
++#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
++
++#define NSLU2_SDA_PIN		7
++#define NSLU2_SCL_PIN		6
++
++/*
++ * NSLU2 PCI IRQs
++ */
++#define NSLU2_PCI_MAX_DEV	3
++#define NSLU2_PCI_IRQ_LINES	3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define NSLU2_PCI_INTA_PIN	11
++#define NSLU2_PCI_INTB_PIN	10
++#define NSLU2_PCI_INTC_PIN	9
++#define NSLU2_PCI_INTD_PIN	8
++
++
++/* NSLU2 Timer */
++#define NSLU2_FREQ 66000000
++#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
++#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
++
++/* GPIO */
++
++#define NSLU2_BZ_GPIO		4
++#define NSLU2_PB_GPIO		5
++#define NSLU2_PO_GPIO		8	/* power off */
++#define NSLU2_RB_GPIO		12
++
++#define NSLU2_PB_IRQ		22	/* gpio5 */
++#define NSLU2_RB_IRQ		29	/* gpio12 */
++
++#define NSLU2_BZ_BM		0x0010	/* b0000 0000 0001 0000 */
++#define NSLU2_PB_BM		0x0020	/* b0000 0000 0010 0000 */
++#define NSLU2_PO_BM		0x0100  /* b0000 0001 0000 0000 */
++#define NSLU2_RB_BM		0x1000	/* b0001 0000 0000 0000 */
diff --git a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-include.patch b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-include.patch
deleted file mode 100644
index afd395b190..0000000000
--- a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-include.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- linux-2.6.14-rc2/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 01:00:00.000000000 +0100
-+++ test3/include/asm-arm/arch-ixp4xx/nslu2.h	2005-09-24 17:46:04.000000000 +0200
-@@ -0,0 +1,48 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nslu2.h
-+ *
-+ * NSLU2 platform specific definitions
-+ *
-+ * Author: Mark Rakes <mrakes AT mac.com>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * based on ixdp425.h:
-+ *	Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under  the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ
-+// kas11 11-2-04
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NSLU2_SDA_PIN		7
-+#define NSLU2_SCL_PIN		6
-+
-+/*
-+ * NSLU2 PCI IRQs
-+ */
-+#define NSLU2_PCI_MAX_DEV	3
-+#define NSLU2_PCI_IRQ_LINES	3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NSLU2_PCI_INTA_PIN	11
-+#define NSLU2_PCI_INTB_PIN	10
-+#define NSLU2_PCI_INTC_PIN	9
-+//#define NSLU2_PCI_INTD_PIN	8
-+
-+
-+/* NSLU2 Timer */
-+//#define NSLU2_FREQ 66000000
-+//#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+//#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+
diff --git a/packages/linux/nslu2-kernel/2.6.14/90-arm-le.patch b/packages/linux/nslu2-kernel/2.6.14/90-arm-le.patch
new file mode 100644
index 0000000000..7af75c736b
--- /dev/null
+++ b/packages/linux/nslu2-kernel/2.6.14/90-arm-le.patch
@@ -0,0 +1,29 @@
+diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S
+--- linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S	2005-07-17 12:13:55.000000000 +0200
+@@ -0,0 +1,13 @@
++/*
++ *  linux/arch/arm/boot/compressed/little-endian.S
++ *
++ *  Switch CPU into little endian mode.
++ *  Author: Nicolas Pitre
++ */
++
++	.section ".start", #alloc, #execinstr
++
++	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
++	bic	r0, r0, #(1 << 7)	@ enable little endian mode
++	mcr	p15, 0, r0, c1, c0, 0	@ write control reg
++
+diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/Makefile linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile
+--- linux-2.6.11.12/arch/arm/boot/compressed/Makefile	2005-06-12 04:45:37.000000000 +0200
++++ linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile	2005-07-17 12:13:55.000000000 +0200
+@@ -56,6 +56,8 @@ endif
+ 
+ ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ OBJS		+= big-endian.o
++else
++OBJS		+= little-endian.o
+ endif
+ 
+ #
diff --git a/packages/linux/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch b/packages/linux/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch
new file mode 100644
index 0000000000..a536325067
--- /dev/null
+++ b/packages/linux/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch
@@ -0,0 +1,13 @@
+diff -urpN linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c
+--- linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c	2005-06-12 04:45:37.000000000 +0200
++++ linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c	2005-07-17 12:13:55.000000000 +0200
+@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
+ #ifdef __ARMEB__
+ 	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
+ #else
+-	*PCI_CSR = PCI_CSR_IC;
++	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
+ #endif
+ 
+ 	pr_debug("DONE\n");
+ 
diff --git a/packages/linux/nslu2-kernel/2.6.14/90-mtd-ixp4xx.patch b/packages/linux/nslu2-kernel/2.6.14/90-mtd-ixp4xx.patch
new file mode 100644
index 0000000000..6d93a09a9f
--- /dev/null
+++ b/packages/linux/nslu2-kernel/2.6.14/90-mtd-ixp4xx.patch
@@ -0,0 +1,75 @@
+--- /tmp/ixp4xx.c	2005-09-24 18:12:25.000000000 +0200
++++ test4/drivers/mtd/maps/ixp4xx.c	2005-09-24 19:02:24.000000000 +0200
+@@ -42,6 +42,10 @@
+ static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
+ {
+ 	map_word val;
++
++#ifndef __ARMEB__
++	ofs ^= 2;
++#endif
+ 	val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
+ 	return val;
+ }
+@@ -51,6 +55,21 @@
+  * when attached to a 16-bit wide device (such as the 28F128J3A),
+  * so we can't just memcpy_fromio().
+  */
++
++#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS)
++struct fis_image_desc {
++	unsigned char name[16];      // Null terminated name
++	unsigned long flash_base;    // Address within FLASH of image
++	unsigned long mem_base;      // Address in memory where it executes
++	unsigned long size;          // Length of image
++	unsigned long entry_point;   // Execution entry point
++	unsigned long data_length;   // Length of actual data
++	unsigned char _pad[256-(16+7*sizeof(unsigned long))];
++	unsigned long desc_cksum;    // Checksum over image descriptor
++	unsigned long file_cksum;    // Checksum over image data
++};
++#endif
++
+ static void ixp4xx_copy_from(struct map_info *map, void *to,
+ 			     unsigned long from, ssize_t len)
+ {
+@@ -71,6 +90,19 @@
+ 
+ 	if (len > 0)
+ 		*dest++ = BYTE0(*(u16 *)src);
++
++#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS)
++        if (from == 0x7e0000) {
++		int i;
++                struct fis_image_desc *desc = (struct fis_image_desc *)to;
++
++                for (i=0; i < (len/sizeof(struct fis_image_desc)); i++) {
++                        desc[i].flash_base = be32_to_cpu(desc[i].flash_base);
++                        desc[i].mem_base   = be32_to_cpu(desc[i].mem_base);
++                        desc[i].size       = be32_to_cpu(desc[i].size);
++                }
++        }
++#endif
+ }
+ 
+ /* 
+@@ -79,6 +111,9 @@
+  */
+ static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
+ {
++#ifndef __ARMEB__
++	adr ^= 2;
++#endif
+ 	if (!(adr & 1))
+ 	       *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+ }
+@@ -88,6 +123,9 @@
+  */
+ static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
+ {
++#ifndef __ARMEB__
++	adr ^= 2;
++#endif
+        *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+ }
+