nslu2-kernel: split nslu2 patches in 2.6.14-rc5

  - the nslu2-arch and nslu2-general patches are now split into nslu2-arch,
  - with all the board level support, and nslu2-<drivers> for each of the
  - separable drivers.  This is to make them ready for pushing upstream.

1 files changed, 267 insertions, 0 deletions

diff --git a/packages/linux/nslu2-kernel/2.6.14/75-nslu2-leds.patch b/packages/linux/nslu2-kernel/2.6.14/75-nslu2-leds.patch
new file mode 100644
index 0000000000..2701c012f3
--- /dev/null
+++ b/packages/linux/nslu2-kernel/2.6.14/75-nslu2-leds.patch
@@ -0,0 +1,267 @@
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig	2005-10-26 15:19:34.490925838 -0700
++++ linux-2.6.13/arch/arm/Kconfig	2005-10-26 15:24:18.628805508 -0700
+@@ -389,7 +389,8 @@ config LEDS
+ 		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
+ 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
+-		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
++		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
++		   MACH_NSLU2
+ 	help
+ 	  If you say Y here, the LEDs on your machine will be used
+ 	  to provide useful information about your current system status.
+@@ -403,7 +404,7 @@ config LEDS
+ 
+ config LEDS_TIMER
+ 	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
+-			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
+ 	depends on LEDS
+ 	default y if ARCH_EBSA110
+ 	help
+@@ -419,7 +420,8 @@ config LEDS_TIMER
+ 
+ config LEDS_CPU
+ 	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
+-			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
++			|| MACH_NSLU2
+ 	depends on LEDS
+ 	help
+ 	  If you say Y here, the red LED will be used to give a good real
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:19:43.979522918 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:24:18.632805759 -0700
+@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-
+ obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
+ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
+ 
++leds-$(CONFIG_MACH_NSLU2)	+= nslu2-leds.o
++obj-$(CONFIG_LEDS)		+= $(leds-y)
++
++
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c	2005-10-26 15:19:44.251540035 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c	2005-10-26 15:24:18.632805759 -0700
+@@ -0,0 +1,223 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-leds.c
++ *
++ * NSLU2 LEDs driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c  
++ *  Copyright (C) 2004 Karen Spearel
++ * and arch/arm/mach-footbridge/netwinder-leds.c
++ *  Copyright (C) 1998-1999 Russell King 
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/notifier.h>
++
++#include <asm/hardware.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++#include <asm/system.h>
++
++#define LED_STATE_ENABLED	0x01
++#define LED_STATE_CLAIMED	0x02
++#define LED_STATE_IDLE		0x04
++
++static unsigned char led_state;
++static unsigned int hw_led_state;
++
++static const unsigned long idle_seq[4] = {
++	
++	NSLU2_LED_GRN_BM, 0,
++	NSLU2_LED_GRN_BM, 0,
++};
++
++static const unsigned long busy_seq[4] = {
++
++	NSLU2_LED_GRN_BM, 0,
++	NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
++};
++
++static unsigned char led_count = 0;
++
++static DEFINE_SPINLOCK(leds_lock);
++extern spinlock_t gpio_lock;
++
++static void nslu2_leds_event(led_event_t evt)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&leds_lock, flags);
++
++	switch (evt) {
++	case led_start:
++		/* Let's rock! Red led on, all others off. Remember
++		 * that disk1/disk2 works inverted. On the NSLU2, the
++		 * interface starts in a claimed state. XXX
++		 */
++		led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
++		hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
++				| NSLU2_LED_RED_BM;
++		break;
++
++	case led_stop:
++		led_state &= ~LED_STATE_ENABLED;
++		break;
++
++	case led_claim:
++		/* The user claimed the interface, red and green off */
++		led_state |= LED_STATE_CLAIMED;
++		hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++		break;
++
++	case led_release:
++		/* The user released the interface, preserve the last
++		 * status of the leds, except red/green.
++		 */
++		led_state &= ~LED_STATE_CLAIMED;
++		hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
++		break;
++
++#ifdef CONFIG_LEDS_TIMER
++	case led_timer:
++		/* Pulse green led */
++		if (!(led_state & LED_STATE_CLAIMED))
++		{
++			/* clear red and green bits */
++			hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++
++			/* copy the right sequence in */
++			if (led_state & LED_STATE_IDLE)
++				hw_led_state |= idle_seq[led_count % 4];
++			else
++				hw_led_state |= busy_seq[led_count % 4];
++
++			led_count++;
++		}
++		break;
++#endif
++
++#ifdef CONFIG_LEDS_CPU
++
++	case led_idle_start:
++		led_state |= LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++		/* green on, red off */
++		hw_led_state |= NSLU2_LED_GRN_BM;
++		hw_led_state &= ~NSLU2_LED_RED_BM;
++#endif
++		break;
++
++	case led_idle_end:
++		led_state &= ~LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++		/* green on, red on -> amber on */
++		hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
++#endif
++		break;
++#endif
++
++	case led_halted:
++		if (!(led_state & LED_STATE_CLAIMED))
++			hw_led_state |= NSLU2_LED_RED_BM;
++		break;
++
++	/* leds */
++
++	case led_green_on:
++		if (led_state & LED_STATE_CLAIMED)
++			hw_led_state |= NSLU2_LED_GRN_BM;
++		break;
++
++	case led_green_off:
++		if (led_state & LED_STATE_CLAIMED)
++			hw_led_state &= ~NSLU2_LED_GRN_BM;
++		break;
++
++	case led_amber_on:
++		if (led_state & LED_STATE_CLAIMED)
++			hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++		break;
++
++	case led_amber_off:
++		if (led_state & LED_STATE_CLAIMED)
++			hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++		break;
++
++	case led_red_on:
++		if (led_state & LED_STATE_CLAIMED)
++			hw_led_state |= NSLU2_LED_RED_BM;
++		break;
++
++	case led_red_off:
++		if (led_state & LED_STATE_CLAIMED)
++			hw_led_state &= ~NSLU2_LED_RED_BM;
++		break;
++
++	default:
++		break;
++	}
++
++	spin_unlock_irqrestore(&leds_lock, flags);
++
++	if  (led_state & LED_STATE_ENABLED) {
++		spin_lock_irqsave(&gpio_lock, flags);
++		*IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
++		spin_unlock_irqrestore(&gpio_lock, flags);
++	}
++}
++
++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
++	void *ptr)
++{
++	leds_event(led_green_off);
++	leds_event(led_red_on);
++
++	return NOTIFY_DONE;
++}
++
++static struct notifier_block nslu2_leds_panic_block = {
++	.notifier_call	= nslu2_leds_panic_event,
++};
++
++static int __init nslu2_leds_init(void)
++{
++	if (!(machine_is_nslu2()))
++		return 0;
++
++	printk(KERN_INFO "NSLU2: leds\n");
++
++	/* register panic notifier */
++	notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
++
++	/* enable gpio 0-3 */
++	gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
++	gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
++	gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
++	gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
++
++	leds_event = nslu2_leds_event;
++
++	/* this will also initialize the leds to the
++	 * default state.
++	 */
++
++	leds_event(led_start);
++
++	return 0;
++}
++
++module_init(nslu2_leds_init);
++