Added spitz_h_rewrite.patch with better Spitz hardware documentation.

1 files changed, 497 insertions, 0 deletions

diff --git a/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch b/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch
new file mode 100644
index 0000000000..df6d5f66c2
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch
@@ -0,0 +1,497 @@
+http://www.uwsg.indiana.edu/hypermail/linux/kernel/0802.1/3541.html
+
+Here is a rewrite of spitz.h, which includes comments documenting
+function of particular GPIO pins.
+
+spitz_h_rewrite.patch provides:
+- no changes in compiled code
+- partial spitz.h rewrite:
+  * organized by function
+  * describes complete GPIO pinout
+  * comments added
+  * removed defines cloning pxa-regs.h
+- prefer generic pxa-regs.h GPIO if available
+- use GPIO names instead of numbers
+
+Thanks to Trisoft for providing needed information.
+
+Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c	2008-01-24 22:58:37.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c	2008-02-13 13:49:22.000000000 +0000
+@@ -110,9 +110,9 @@
+ 	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
+ 
+ 	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
+-	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
+-	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
+-	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
++	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
++	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST) | PWER_RTC;
++	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
+ 	PKSR = 0xffffffff; // clear
+ 
+ 	/* nRESET_OUT Disable */
+@@ -128,7 +128,7 @@
+ static void spitz_postsuspend(void)
+ {
+ 	pxa_gpio_mode(GPIO18_RDY_MD);
+-	pxa_gpio_mode(10 | GPIO_IN);
++	pxa_gpio_mode(SPITZ_GPIO_NC_10 | GPIO_IN);
+ }
+ 
+ static int spitz_should_wakeup(unsigned int resume_on_alarm)
+Index: linux-2.6.24/drivers/video/pxafb.c
+===================================================================
+--- linux-2.6.24.orig/drivers/video/pxafb.c	2008-02-13 13:49:04.000000000 +0000
++++ linux-2.6.24/drivers/video/pxafb.c	2008-02-13 13:49:57.000000000 +0000
+@@ -920,7 +920,7 @@
+ 		return;
+         }
+ 
+-	for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) {
++	for (gpio = GPIO58_LDD_0; ldd_bits > 0; gpio++, ldd_bits--) {
+ 		pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
+ 	}
+ 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
+Index: linux-2.6.24/include/asm-arm/arch-pxa/akita.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/akita.h	2008-01-24 22:58:37.000000000 +0000
++++ linux-2.6.24/include/asm-arm/arch-pxa/akita.h	2008-02-13 13:49:22.000000000 +0000
+@@ -12,11 +12,11 @@
+ /* Akita IO Expander GPIOs */
+ 
+ #define AKITA_IOEXP_RESERVED_7      (1 << 7)
+-#define AKITA_IOEXP_IR_ON           (1 << 6)
+-#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
+-#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
+-#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
+-#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
++#define AKITA_IOEXP_IR_ON           (1 << 6)	/* IrDA On */
++#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)	/* Pull-Up for Remote */
++#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)	/* Backlight Control */
++#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)	/* Backlight On */
++#define AKITA_IOEXP_MIC_BIAS        (1 << 2)	/* Mic Bias On */
+ #define AKITA_IOEXP_RESERVED_1      (1 << 1)
+ #define AKITA_IOEXP_RESERVED_0      (1 << 0)
+ 
+Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h	2008-02-13 13:49:07.000000000 +0000
++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h	2008-02-13 13:49:22.000000000 +0000
+@@ -1334,6 +1334,7 @@
+ #define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
+ #define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
+ #define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
++#define GPIO104_pSKTSEL		104	/* PCMCIA Socket Select (PXA27x) */
+ #define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
+ #define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
+ #define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
+Index: linux-2.6.24/include/asm-arm/arch-pxa/spitz.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/spitz.h	2008-02-13 13:49:01.000000000 +0000
++++ linux-2.6.24/include/asm-arm/arch-pxa/spitz.h	2008-02-13 13:49:22.000000000 +0000
+@@ -1,8 +1,9 @@
+ /*
+- * Hardware specific definitions for SL-Cx000 series of PDAs
++ * Hardware specific definitions for SL-Cxx00 series of PDAs
+  *
+  * Copyright (c) 2005 Alexander Wykes
+  * Copyright (c) 2005 Richard Purdie
++ * Copyright (c) 2008 Stanislav Brabec
+  *
+  * Based on Sharp's 2.4 kernel patches
+  *
+@@ -13,140 +14,257 @@
+  */
+ #ifndef __ASM_ARCH_SPITZ_H
+ #define __ASM_ARCH_SPITZ_H  1
+-#endif
+ 
+-#include <linux/fb.h>
++#include <asm-arm/arch-pxa/irqs.h>
++#include <linux/platform_device.h>
+ 
+ /* Spitz/Akita GPIOs */
+ 
+-#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
+-#define SPITZ_GPIO_RESET           (1)
+-#define SPITZ_GPIO_nSD_DETECT      (9)
+-#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
+-#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
+-#define SPITZ_GPIO_ADS7846_CS      (14)
+-#define SPITZ_GPIO_SYNC            (16)
+-#define SPITZ_GPIO_MAX1111_CS      (20)
+-#define SPITZ_GPIO_FATAL_BAT       (21)
+-#define SPITZ_GPIO_HSYNC           (22)
+-#define SPITZ_GPIO_nSD_CLK         (32)
+-#define SPITZ_GPIO_USB_DEVICE      (35)
+-#define SPITZ_GPIO_USB_HOST        (37)
+-#define SPITZ_GPIO_USB_CONNECT     (41)
+-#define SPITZ_GPIO_LCDCON_CS       (53)
+-#define SPITZ_GPIO_nPCE            (54)
+-#define SPITZ_GPIO_nSD_WP          (81)
+-#define SPITZ_GPIO_ON_RESET        (89)
+-#define SPITZ_GPIO_BAT_COVER       (90)
+-#define SPITZ_GPIO_CF_CD           (94)
+-#define SPITZ_GPIO_ON_KEY          (95)
+-#define SPITZ_GPIO_SWA             (97)
+-#define SPITZ_GPIO_SWB             (96)
+-#define SPITZ_GPIO_CHRG_FULL       (101)
+-#define SPITZ_GPIO_CO              (101)
+-#define SPITZ_GPIO_CF_IRQ          (105)
+-#define SPITZ_GPIO_AC_IN           (115)
+-#define SPITZ_GPIO_HP_IN           (116)
++/* This list refers to all GPIO pins either in defines or in comments.
++ *
++ * GPIO pins not listed:
++ * GPIO2	SYS_EN: 		System Power Enable
++ * GPIO5-GPIO8	PWR_CAP0-PWR_CAP3:	sleep DC-DC converter power capacitors
++ * GPIO40	not connected
++ */
+ 
+-/* Spitz Only GPIOs */
+ 
+-#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
+-#define SPITZ_GPIO_CF2_CD          (93)
++/* Spitz/Akita System GPIO */
++
++#define SPITZ_GPIO_KEY_INT	   (0)	/* Key Interrupt */
++#define SPITZ_GPIO_SYNC		  (16)	/* IOPORT Wake Up (input) */
++#define SPITZ_GPIO_NAND_CS	  (79)	/* NAND Flash Chip Select */
++#define SPITZ_GPIO_NC_10	  (10)	/* Not Connected (but used in kernel) */
++/* This GPIO pin is connected:
++ * GPIO1_RST
++ */
+ 
+ 
++/* Compact Flash Interface */
++
++/* Spitz/Akita Compact Flash Interface */
++#define SPITZ_GPIO_CF_CD	  (94)	/* CF IRQ */
++#define SPITZ_GPIO_CF_IRQ	 (105)	/* CF Ready */
++/* These GPIO pins are connected:
++ * GPIO48_nPOE
++ * GPIO49_nPWE
++ * GPIO50_nPIOR
++ * GPIO51_nPIOW
++ * GPIO54_nPCE_2
++ * GPIO55_nPREG
++ * GPIO56_nPWAIT
++ * GPIO57_nIOIS16
++ * GPIO80_nCS_4
++ * GPIO85_nPCE_1
++ * GPIO104_pSKTSEL
++ */
++
++/* Spitz only Compact Flash Interface */
++#define SPITZ_GPIO_CF2_CD	  (93)	/* CF slot1 IRQ */
++#define SPITZ_GPIO_CF2_IRQ	 (106)	/* CF slot1 Ready */
++/* This GPIO pin is connected:
++ * GPIO78_nCS_2
++ */
++
++
++/* Spitz/Akita Battery, Power and Service Connector */
++
++#define SPITZ_GPIO_FATAL_BAT	  (21)	/* Fatal Battery */
++#define SPITZ_GPIO_BAT_COVER	  (90)	/* Battery Cover switch */
++#define SPITZ_GPIO_BAT_COVER2	  (15)	/* Battery Cover switch, parallel pin */
++#define SPITZ_GPIO_CHRG_FULL	 (101)	/* Battery Full */
++#define SPITZ_GPIO_AC_IN	 (115)	/* External Power Supply is active */
++#define SPITZ_GPIO_ON_RESET	  (89)	/* Software Reset */
++#define SPITZ_GPIO_SERVICE0	  (83)	/* Service Connector */
++#define SPITZ_GPIO_SERVICE1	  (84)	/* Service Connector */
++/* This GPIO pin is connected:
++ * GPIO18_RDY
++ */
++
++
++/* Spitz/Akita Display Controller */
++
++#define SPITZ_GPIO_HSYNC	  (22)	/* Line Sync Feedback */
++/* These GPIO pins are connected:
++ * GPIO58_LDD_0-GPIO58_LDD_15
++ * GPIO74_LCD_FCLK
++ * GPIO75_LCD_LCLK
++ * GPIO76_LCD_PCLK
++ * GPIO77_LCD_ACBIAS
++ */
++
++
++/* Spitz/Akita SSP/SPI Bus and Devices */
++
++#define SPITZ_GPIO_SSP_CLK	  (19)	/* SSP bus Clock */
++#define SPITZ_GPIO_SSP_RXD	  (86)	/* SSP bus RxD */
++#define SPITZ_GPIO_SSP_TXD	  (87)	/* SSP bus TxD */
++#define SPITZ_GPIO_TP_INT	  (11)	/* Touch Panel IRQ */
++#define SPITZ_GPIO_ADS7846_CS	  (14)	/* Touch Panel Controller Chip Select */
++#define SPITZ_GPIO_MAX1111_CS	  (20)	/* Multi Channel ADC Chip Select */
++#define SPITZ_GPIO_LCDCON_CS	  (53)	/* LCD Controller Chip Select */
++
++
++/* Spitz/Akita Supplementary USB OTG Pins */
++
++#define SPITZ_GPIO_USB_DEVICE	  (35)	/* USB Client power is present */
++#define SPITZ_GPIO_USB_HOST	  (37)	/* USB OTG 5V Host power supply control */
++#define SPITZ_GPIO_USB_CONNECT	  (41)	/* USB Host Cable is connected */
++
++
++/* Spitz/Akita Audio */
++
++#define SPITZ_GPIO_HP_IN	 (116)	/* CPU Headphone detect */
++#define SPITZ_GPIO_AK_INT	  (13)	/* Remote Control detect */
++/* These GPIO AC97 pins are connected:
++ * GPIO28_BITCLK
++ * GPIO29_SDATA_IN
++ * GPIO30_SDATA_OUT
++ * GPIO31_SYNC
++ * GPIO113_AC97_RESET_N
++ */
++
++
++/* Spitz/Akita SD Slot */
++
++#define SPITZ_GPIO_nSD_DETECT	  (9)	/* SD Card Presence */
++#define SPITZ_GPIO_nSD_WP	 (81)	/* SD Write Protection */
++/* These GPIO pins are connected:
++ * GPIO32_MMCCLK
++ * GPIO92_MMCDAT0
++ * GPIO109_MMCDAT1
++ * GPIO110_MMCDAT2
++ * GPIO111_MMCDAT3
++ * GPIO112_MMCCMD
++ */
++
++/* Spitz/Akita I2C bus */
++#define SPITZ_GPIO_SCL		 (117)	/* I2C SCL */
++#define SPITZ_GPIO_SDA		 (118)	/* I2C SDA */
++#define SPITZ_GPIO_PWR_SCL	   (3)	/* I2C SCL power */
++#define SPITZ_GPIO_PWR_SDA	   (4)	/* I2C SDA power */
++
++/* audio codec pins */
++
++
++/* Spitz/Akita UART ports */
++
++/* Fully Featured UART - connected to IOPORT connector */
++#define SPITZ_GPIO_FFRXD	 (102)	/* IOPORT has nRXD inverted levels */
++#define SPITZ_GPIO_FFTXD	  (99)	/* IOPORT has nTXD inverted levels */
++#define SPITZ_GPIO_FFRTS	  (98)
++#define SPITZ_GPIO_FFCTS	 (100)
++#define SPITZ_GPIO_FFDTR	  (82)
++#define SPITZ_GPIO_FFDSR	  (33)
++
++/* These UART GPIO pins are connected to Bluetooth
++ * (only on Akita version with Bluetooth)
++ * GPIO42_BTRXD
++ * GPIO43_BTTXD
++ * GPIO44_BTCTS
++ * GPIO45_BTRTS
++ */
++
++/* These UART GPIO pins are connected to IrDA:
++ * GPIO46_STRXD
++ * GPIO47_STTXD
++ */
++
+ /* Spitz/Akita Keyboard Definitions */
+ 
+-#define SPITZ_KEY_STROBE_NUM         (11)
+-#define SPITZ_KEY_SENSE_NUM          (7)
+-#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
+-#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
+-#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
+-#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
+-#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
+-#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
+-#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
+-#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
+-
+-#define SPITZ_GPIO_KEY_STROBE0       88
+-#define SPITZ_GPIO_KEY_STROBE1       23
+-#define SPITZ_GPIO_KEY_STROBE2       24
+-#define SPITZ_GPIO_KEY_STROBE3       25
+-#define SPITZ_GPIO_KEY_STROBE4       26
+-#define SPITZ_GPIO_KEY_STROBE5       27
+-#define SPITZ_GPIO_KEY_STROBE6       52
+-#define SPITZ_GPIO_KEY_STROBE7       103
+-#define SPITZ_GPIO_KEY_STROBE8       107
+-#define SPITZ_GPIO_KEY_STROBE9       108
+-#define SPITZ_GPIO_KEY_STROBE10      114
+-
+-#define SPITZ_GPIO_KEY_SENSE0        12
+-#define SPITZ_GPIO_KEY_SENSE1        17
+-#define SPITZ_GPIO_KEY_SENSE2        91
+-#define SPITZ_GPIO_KEY_SENSE3        34
+-#define SPITZ_GPIO_KEY_SENSE4        36
+-#define SPITZ_GPIO_KEY_SENSE5        38
+-#define SPITZ_GPIO_KEY_SENSE6        39
++#define SPITZ_KEY_STROBE_NUM	  (11)
++#define SPITZ_KEY_SENSE_NUM	   (7)
++#define SPITZ_GPIO_G0_STROBE_BIT  0x0f800000
++#define SPITZ_GPIO_G1_STROBE_BIT  0x00100000
++#define SPITZ_GPIO_G2_STROBE_BIT  0x01000000
++#define SPITZ_GPIO_G3_STROBE_BIT  0x00041880
++#define SPITZ_GPIO_G0_SENSE_BIT   0x00021000
++#define SPITZ_GPIO_G1_SENSE_BIT   0x000000d4
++#define SPITZ_GPIO_G2_SENSE_BIT   0x08000000
++#define SPITZ_GPIO_G3_SENSE_BIT   0x00000000
++#define SPITZ_GPIO_KEY_STROBE0	  (88)
++#define SPITZ_GPIO_KEY_STROBE1	  (23)
++#define SPITZ_GPIO_KEY_STROBE2	  (24)
++#define SPITZ_GPIO_KEY_STROBE3	  (25)
++#define SPITZ_GPIO_KEY_STROBE4	  (26)
++#define SPITZ_GPIO_KEY_STROBE5	  (27)
++#define SPITZ_GPIO_KEY_STROBE6	  (52)
++#define SPITZ_GPIO_KEY_STROBE7   (103)
++#define SPITZ_GPIO_KEY_STROBE8   (107)
++#define SPITZ_GPIO_KEY_STROBE9   (108)
++#define SPITZ_GPIO_KEY_STROBE10  (114)
++#define SPITZ_GPIO_KEY_SENSE0	  (12)
++#define SPITZ_GPIO_KEY_SENSE1	  (17)
++#define SPITZ_GPIO_KEY_SENSE2	  (91)
++#define SPITZ_GPIO_KEY_SENSE3	  (34)
++#define SPITZ_GPIO_KEY_SENSE4	  (36)
++#define SPITZ_GPIO_KEY_SENSE5	  (38)
++#define SPITZ_GPIO_KEY_SENSE6	  (39)
++
++#define SPITZ_GPIO_SWA		  (97)	/* Keyboard Interrupt A */
++#define SPITZ_GPIO_SWB		  (96)	/* Keyboard Interrupt B */
++#define SPITZ_GPIO_ON_KEY	  (95)	/* Power On Key */
+ 
+ 
+-/* Spitz Scoop Device (No. 1) GPIOs */
++/* Spitz/Akita Scoop Device (No. 1) GPIOs */
+ /* Suspend States in comments */
+-#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
+-#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
+-#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
+-#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
+-#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
+-#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
+-#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
+-#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
+-#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
++#define SPITZ_SCP_LED_GREEN	SCOOP_GPCR_PA11  /* Green LED, Keep */
++#define SPITZ_SCP_JK_B		SCOOP_GPCR_PA12  /* Fast Charge On, Keep */
++#define SPITZ_SCP_CHRG_ON	SCOOP_GPCR_PA13  /* Charge On, Keep */
++#define SPITZ_SCP_MUTE_L	SCOOP_GPCR_PA14  /* Extra Mute Left, Low */
++#define SPITZ_SCP_MUTE_R	SCOOP_GPCR_PA15  /* Extra Mute Right, Low */
++#define SPITZ_SCP_CF_POWER	SCOOP_GPCR_PA16  /* CF+SD Power Circuit, Keep */
++#define SPITZ_SCP_LED_ORANGE	SCOOP_GPCR_PA17  /* Orange LED, Keep */
++#define SPITZ_SCP_JK_A		SCOOP_GPCR_PA18  /* Dummy Load, Low */
++#define SPITZ_SCP_ADC_TEMP_ON	SCOOP_GPCR_PA19  /* Battery Sensor On, Low */
+ 
+ #define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+-                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
++			       SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
++			       SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+ #define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+ #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+ #define SPITZ_SCP_SUS_SET     0
+ 
+ /* Spitz Scoop Device (No. 2) GPIOs */
+-/* Suspend States in comments */
+-#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
+-#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
+-#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
+-#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
+-#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
+-#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
+-#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
+-#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
+-#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
++/* Suspend States in comments
++ * Spitz only, Akita uses corresponding AKITA_IOEXP_ */
++#define SPITZ_SCP2_IR_ON	   SCOOP_GPCR_PA11  /* IrDA On, High */
++#define SPITZ_SCP2_AKIN_PULLUP	   SCOOP_GPCR_PA12  /* Pull-Up for Remote, Keep */
++#define SPITZ_SCP2_RESERVED_1	   SCOOP_GPCR_PA13  /* High */
++#define SPITZ_SCP2_RESERVED_2	   SCOOP_GPCR_PA14  /* Low */
++#define SPITZ_SCP2_RESERVED_3	   SCOOP_GPCR_PA15  /* Low */
++#define SPITZ_SCP2_RESERVED_4	   SCOOP_GPCR_PA16  /* Low */
++#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Backlight Control, Low */
++#define SPITZ_SCP2_BACKLIGHT_ON	   SCOOP_GPCR_PA18  /* Backlight On, Low */
++#define SPITZ_SCP2_MIC_BIAS	   SCOOP_GPCR_PA19  /* Mic Bias On, Low */
+ 
+ #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+-                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+-                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
++			   SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
++			   SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+ 
+ #define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+ #define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+-                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
++			     SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+ #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+ 
+ 
+-/* Spitz IRQ Definitions */
++/* Spitz/Akita IRQ Definitions */
+ 
+-#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+-#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+-#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+-#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+-#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+-#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+-#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+-#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+-#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
++#define SPITZ_IRQ_GPIO_KEY_INT	      IRQ_GPIO(SPITZ_GPIO_KEY_INT)
++#define SPITZ_IRQ_GPIO_AC_IN	      IRQ_GPIO(SPITZ_GPIO_AC_IN)
++#define SPITZ_IRQ_GPIO_AK_INT	      IRQ_GPIO(SPITZ_GPIO_AK_INT)
++#define SPITZ_IRQ_GPIO_HP_IN	      IRQ_GPIO(SPITZ_GPIO_HP_IN)
++#define SPITZ_IRQ_GPIO_TP_INT	      IRQ_GPIO(SPITZ_GPIO_TP_INT)
++#define SPITZ_IRQ_GPIO_SYNC	      IRQ_GPIO(SPITZ_GPIO_SYNC)
++#define SPITZ_IRQ_GPIO_ON_KEY	      IRQ_GPIO(SPITZ_GPIO_ON_KEY)
++#define SPITZ_IRQ_GPIO_SWA	      IRQ_GPIO(SPITZ_GPIO_SWA)
++#define SPITZ_IRQ_GPIO_SWB	      IRQ_GPIO(SPITZ_GPIO_SWB)
+ #define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+ #define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+-#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+-#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+-#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+-#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+-#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
++#define SPITZ_IRQ_GPIO_CF_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
++#define SPITZ_IRQ_GPIO_CF_CD	      IRQ_GPIO(SPITZ_GPIO_CF_CD)
++#define SPITZ_IRQ_GPIO_CF2_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
++#define SPITZ_IRQ_GPIO_nSD_INT	      IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+ #define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+ 
+ /*
+@@ -156,3 +274,5 @@
+ extern struct platform_device spitzscoop2_device;
+ extern struct platform_device spitzssp_device;
+ extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
++
++#endif
+Index: linux-2.6.24/sound/arm/pxa2xx-ac97.c
+===================================================================
+--- linux-2.6.24.orig/sound/arm/pxa2xx-ac97.c	2008-01-24 22:58:37.000000000 +0000
++++ linux-2.6.24/sound/arm/pxa2xx-ac97.c	2008-02-13 13:49:22.000000000 +0000
+@@ -133,10 +133,10 @@
+ #ifdef CONFIG_PXA27x
+ 		/* warm reset broken on Bulverde,
+ 		   so manually keep AC97 reset high */
+-		pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); 
++		pxa_gpio_mode(GPIO113_AC97_RESET_N | GPIO_OUT | GPIO_DFLT_HIGH); 
+ 		udelay(10);
+ 		GCR |= GCR_WARM_RST;
+-		pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
++		pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
+ 		udelay(500);
+ #else
+ 		GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN;
+@@ -335,7 +335,7 @@
+ 	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+ #ifdef CONFIG_PXA27x
+ 	/* Use GPIO 113 as AC97 Reset on Bulverde */
+-	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
++	pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
+ #endif
+ 	pxa_set_cken(CKEN_AC97, 1);
+