linux-omap2 git: add oprofile patch for armv7a

2 files changed, 619 insertions, 10 deletions

diff --git a/packages/linux/linux-omap2-git/beagleboard/defconfig b/packages/linux/linux-omap2-git/beagleboard/defconfig
index 7fc46c9113..87fadae1ec 100644
--- a/packages/linux/linux-omap2-git/beagleboard/defconfig
+++ b/packages/linux/linux-omap2-git/beagleboard/defconfig
@@ -1,10 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc7-omap1
-# Tue Jun 24 20:16:52 2008
+# Linux kernel version: 2.6.26-rc8-omap1
+# Fri Jul  4 09:57:18 2008
 #
 CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=n
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -23,6 +23,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
+CONFIG_OPROFILE_ARMV7=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -31,7 +32,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
@@ -84,8 +84,9 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -254,7 +255,7 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=n
+# CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -346,7 +347,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=n
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
@@ -772,7 +773,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -932,7 +932,6 @@ CONFIG_HAVE_GPIO_LIB=y
 CONFIG_POWER_SUPPLY=m
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_HWMON=y
@@ -1827,7 +1826,6 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/packages/linux/linux-omap2-git/beagleboard/oprofile-0.9.3.armv7.diff b/packages/linux/linux-omap2-git/beagleboard/oprofile-0.9.3.armv7.diff
new file mode 100644
index 0000000000..dbc11fbe7d
--- /dev/null
+++ b/packages/linux/linux-omap2-git/beagleboard/oprofile-0.9.3.armv7.diff
@@ -0,0 +1,611 @@
+Hi,
+
+This patch adds Oprofile support on ARMv7, using the PMNC unit.
+Tested on OMAP3430 SDP.
+
+Feedback and comments are welcome.
+
+The patch to user space components is attached for reference. It i applies 
+against version 0.9.3 of oprofile source 
+(http://prdownloads.sourceforge.net/oprofile/oprofile-0.9.3.tar.gz).
+
+Regards,
+Jean.
+
+---
+
+From: Jean Pihet <jpihet@mvista.com>
+Date: Tue, 6 May 2008 17:21:44 +0200
+Subject: [PATCH] ARM: Add ARMv7 oprofile support
+
+Add ARMv7 Oprofile support to kernel
+
+Signed-off-by: Jean Pihet <jpihet@mvista.com>
+---
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index c60a27d..60b50a0 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -161,6 +161,11 @@ config OPROFILE_MPCORE
+ config OPROFILE_ARM11_CORE
+ 	bool
+ 
++config OPROFILE_ARMV7
++	def_bool y
++	depends on CPU_V7 && !SMP
++	bool
++
+ endif
+ 
+ config VECTORS_BASE
+diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
+index e61d0cc..88e31f5 100644
+--- a/arch/arm/oprofile/Makefile
++++ b/arch/arm/oprofile/Makefile
+@@ -11,3 +11,4 @@ oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
+ oprofile-$(CONFIG_OPROFILE_ARM11_CORE)	+= op_model_arm11_core.o
+ oprofile-$(CONFIG_OPROFILE_ARMV6)	+= op_model_v6.o
+ oprofile-$(CONFIG_OPROFILE_MPCORE)	+= op_model_mpcore.o
++oprofile-$(CONFIG_OPROFILE_ARMV7)	+= op_model_v7.o
+diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
+index 0a5cf3a..3fcd752 100644
+--- a/arch/arm/oprofile/common.c
++++ b/arch/arm/oprofile/common.c
+@@ -145,6 +145,10 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) 
+ 	spec = &op_mpcore_spec;
+ #endif
+ 
++#ifdef CONFIG_OPROFILE_ARMV7
++	spec = &op_armv7_spec;
++#endif
++
+ 	if (spec) {
+ 		ret = spec->init();
+ 		if (ret < 0)
+diff --git a/arch/arm/oprofile/op_arm_model.h 
+b/arch/arm/oprofile/op_arm_model.h
+index 4899c62..8c4e4f6 100644
+--- a/arch/arm/oprofile/op_arm_model.h
++++ b/arch/arm/oprofile/op_arm_model.h
+@@ -26,6 +26,7 @@ extern struct op_arm_model_spec op_xscale_spec;
+ 
+ extern struct op_arm_model_spec op_armv6_spec;
+ extern struct op_arm_model_spec op_mpcore_spec;
++extern struct op_arm_model_spec op_armv7_spec;
+ 
+ extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
+ 
+diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
+new file mode 100644
+index 0000000..a159bc1
+--- /dev/null
++++ b/arch/arm/oprofile/op_model_v7.c
+@@ -0,0 +1,407 @@
++/**
++ * @file op_model_v7.c
++ * ARM V7 (Cortex A8) Event Monitor Driver
++ *
++ * @remark Copyright 2008 Jean Pihet <jpihet@mvista.com>
++ * @remark Copyright 2004 ARM SMP Development Team
++ */
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/oprofile.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/smp.h>
++
++#include "op_counter.h"
++#include "op_arm_model.h"
++#include "op_model_v7.h"
++
++/* #define DEBUG */
++
++
++/*
++ * ARM V7 PMNC support
++ */
++
++static u32 cnt_en[CNTMAX];
++
++static inline void armv7_pmnc_write(u32 val)
++{
++	val &= PMNC_MASK;
++	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
++}
++
++static inline u32 armv7_pmnc_read(void)
++{
++	u32 val;
++
++	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
++	return val;
++}
++
++static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
++{
++	u32 val;
++
++	if (cnt >= CNTMAX) {
++		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
++			" %d\n", smp_processor_id(), cnt);
++		return -1;
++	}
++
++	if (cnt == CCNT)
++		val = CNTENS_C;
++	else
++		val = (1 << (cnt - CNT0));
++
++	val &= CNTENS_MASK;
++	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
++
++	return cnt;
++}
++
++static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
++{
++	u32 val;
++
++	if (cnt >= CNTMAX) {
++		printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
++			" %d\n", smp_processor_id(), cnt);
++		return -1;
++	}
++
++	if (cnt == CCNT)
++		val = CNTENC_C;
++	else
++		val = (1 << (cnt - CNT0));
++
++	val &= CNTENC_MASK;
++	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
++
++	return cnt;
++}
++
++static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
++{
++	u32 val;
++
++	if (cnt >= CNTMAX) {
++		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
++			" interrupt enable %d\n", smp_processor_id(), cnt);
++		return -1;
++	}
++
++	if (cnt == CCNT)
++		val = INTENS_C;
++	else
++		val = (1 << (cnt - CNT0));
++
++	val &= INTENS_MASK;
++	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
++
++	return cnt;
++}
++
++static inline u32 armv7_pmnc_getreset_flags(void)
++{
++	u32 val;
++
++	/* Read */
++	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
++
++	/* Write to clear flags */
++	val &= FLAG_MASK;
++	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
++
++	return val;
++}
++
++static inline int armv7_pmnc_select_counter(unsigned int cnt)
++{
++	u32 val;
++
++	if ((cnt == CCNT) || (cnt >= CNTMAX)) {
++		printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
++			" %d\n", smp_processor_id(), cnt);
++		return -1;
++	}
++
++	val = (cnt - CNT0) & SELECT_MASK;
++	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
++
++	return cnt;
++}
++
++static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
++{
++	if (armv7_pmnc_select_counter(cnt) == cnt) {
++		val &= EVTSEL_MASK;
++		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
++	}
++}
++
++static void armv7_pmnc_reset_counter(unsigned int cnt)
++{
++	u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
++	u32 val = -(u32)counter_config[cpu_cnt].count;
++
++	switch (cnt) {
++	case CCNT:
++		armv7_pmnc_disable_counter(cnt);
++
++		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
++
++		if (cnt_en[cnt] != 0)
++		    armv7_pmnc_enable_counter(cnt);
++
++		break;
++
++	case CNT0:
++	case CNT1:
++	case CNT2:
++	case CNT3:
++		armv7_pmnc_disable_counter(cnt);
++
++		if (armv7_pmnc_select_counter(cnt) == cnt)
++		    asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
++
++		if (cnt_en[cnt] != 0)
++		    armv7_pmnc_enable_counter(cnt);
++
++		break;
++
++	default:
++		printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
++			" %d\n", smp_processor_id(), cnt);
++		break;
++	}
++}
++
++int armv7_setup_pmnc(void)
++{
++	unsigned int cnt;
++
++	if (armv7_pmnc_read() & PMNC_E) {
++		printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
++			" new event counter.\n", smp_processor_id());
++		return -EBUSY;
++	}
++
++	/*
++	 * Initialize & Reset PMNC: C bit, D bit and P bit.
++	 *  Note: Using a slower count for CCNT (D bit: divide by 64) results
++	 *   in a more stable system
++	 */
++	armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D);
++
++
++	for (cnt = CCNT; cnt < CNTMAX; cnt++) {
++		unsigned long event;
++		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
++
++		/*
++		 * Disable counter
++		 */
++		armv7_pmnc_disable_counter(cnt);
++		cnt_en[cnt] = 0;
++
++		if (!counter_config[cpu_cnt].enabled)
++			continue;
++
++		event = counter_config[cpu_cnt].event & 255;
++
++		/*
++		 * Set event (if destined for PMNx counters)
++		 * We don't need to set the event if it's a cycle count
++		 */
++		if (cnt != CCNT)
++			armv7_pmnc_write_evtsel(cnt, event);
++
++		/*
++		 * Enable interrupt for this counter
++		 */
++		armv7_pmnc_enable_intens(cnt);
++
++		/*
++		 * Reset counter
++		 */
++		armv7_pmnc_reset_counter(cnt);
++
++		/*
++		 * Enable counter
++		 */
++		armv7_pmnc_enable_counter(cnt);
++		cnt_en[cnt] = 1;
++	}
++
++	return 0;
++}
++
++static inline void armv7_start_pmnc(void)
++{
++	armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
++}
++
++static inline void armv7_stop_pmnc(void)
++{
++	armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
++}
++
++/*
++ * CPU counters' IRQ handler (one IRQ per CPU)
++ */
++static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
++{
++	struct pt_regs *regs = get_irq_regs();
++	unsigned int cnt;
++	u32 flags;
++
++
++	/*
++	 * Stop IRQ generation
++	 */
++	armv7_stop_pmnc();
++
++	/*
++	 * Get and reset overflow status flags
++	 */
++	flags = armv7_pmnc_getreset_flags();
++
++	/*
++	 * Cycle counter
++	 */
++	if (flags & FLAG_C) {
++		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
++		armv7_pmnc_reset_counter(CCNT);
++		oprofile_add_sample(regs, cpu_cnt);
++	}
++
++	/*
++	 * PMNC counters 0:3
++	 */
++	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
++		if (flags & (1 << (cnt - CNT0))) {
++			u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
++			armv7_pmnc_reset_counter(cnt);
++			oprofile_add_sample(regs, cpu_cnt);
++		}
++	}
++
++	/*
++	 * Allow IRQ generation
++	 */
++	armv7_start_pmnc();
++
++	return IRQ_HANDLED;
++}
++
++int armv7_request_interrupts(int *irqs, int nr)
++{
++	unsigned int i;
++	int ret = 0;
++
++	for (i = 0; i < nr; i++) {
++		ret = request_irq(irqs[i], armv7_pmnc_interrupt,
++				IRQF_DISABLED, "CP15 PMNC", NULL);
++		if (ret != 0) {
++			printk(KERN_ERR "oprofile: unable to request IRQ%u"
++				" for ARMv7\n",
++			       irqs[i]);
++			break;
++		}
++	}
++
++	if (i != nr)
++		while (i-- != 0)
++			free_irq(irqs[i], NULL);
++
++	return ret;
++}
++
++void armv7_release_interrupts(int *irqs, int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++)
++		free_irq(irqs[i], NULL);
++}
++
++#ifdef DEBUG
++static void armv7_pmnc_dump_regs(void)
++{
++	u32 val;
++	unsigned int cnt;
++
++	printk(KERN_INFO "PMNC registers dump:\n");
++
++	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
++	printk(KERN_INFO "PMNC  =0x%08x\n", val);
++
++	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
++	printk(KERN_INFO "CNTENS=0x%08x\n", val);
++
++	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
++	printk(KERN_INFO "INTENS=0x%08x\n", val);
++
++	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
++	printk(KERN_INFO "FLAGS =0x%08x\n", val);
++
++	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
++	printk(KERN_INFO "SELECT=0x%08x\n", val);
++
++	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
++	printk(KERN_INFO "CCNT  =0x%08x\n", val);
++
++	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
++		armv7_pmnc_select_counter(cnt);
++		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
++		printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
++		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
++		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
++	}
++}
++#endif
++
++
++static int irqs[] = {
++#ifdef CONFIG_ARCH_OMAP3
++	INT_34XX_BENCH_MPU_EMUL,
++#endif
++};
++
++static void armv7_pmnc_stop(void)
++{
++#ifdef DEBUG
++	armv7_pmnc_dump_regs();
++#endif
++	armv7_stop_pmnc();
++	armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
++}
++
++static int armv7_pmnc_start(void)
++{
++	int ret;
++
++#ifdef DEBUG
++	armv7_pmnc_dump_regs();
++#endif
++	ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
++	if (ret >= 0)
++		armv7_start_pmnc();
++
++	return ret;
++}
++
++static int armv7_detect_pmnc(void)
++{
++	return 0;
++}
++
++struct op_arm_model_spec op_armv7_spec = {
++	.init		= armv7_detect_pmnc,
++	.num_counters	= 5,
++	.setup_ctrs	= armv7_setup_pmnc,
++	.start		= armv7_pmnc_start,
++	.stop		= armv7_pmnc_stop,
++	.name		= "arm/armv7",
++};
+diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
+new file mode 100644
+index 0000000..08f40ea
+--- /dev/null
++++ b/arch/arm/oprofile/op_model_v7.h
+@@ -0,0 +1,101 @@
++/**
++ * @file op_model_v7.h
++ * ARM v7 (Cortex A8) Event Monitor Driver
++ *
++ * @remark Copyright 2008 Jean Pihet <jpihet@mvista.com>
++ * @remark Copyright 2004 ARM SMP Development Team
++ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
++ * @remark Copyright 2000-2004 MontaVista Software Inc
++ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
++ * @remark Copyright 2004 Intel Corporation
++ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
++ * @remark Copyright 2004 Oprofile Authors
++ *
++ * @remark Read the file COPYING
++ *
++ * @author Zwane Mwaikambo
++ */
++#ifndef OP_MODEL_V7_H
++#define OP_MODEL_V7_H
++
++/*
++ * Per-CPU PMNC: config reg
++ */
++#define PMNC_E		(1 << 0)	/* Enable all counters */
++#define PMNC_P		(1 << 1)	/* Reset all counters */
++#define PMNC_C		(1 << 2)	/* Cycle counter reset */
++#define PMNC_D		(1 << 3)	/* CCNT counts every 64th cpu cycle */
++#define PMNC_X		(1 << 4)	/* Export to ETM */
++#define PMNC_DP		(1 << 5)	/* Disable CCNT if non-invasive debug*/
++#define	PMNC_MASK	0x3f		/* Mask for writable bits */
++
++/*
++ * Available counters
++ */
++#define CCNT 		0
++#define CNT0 		1
++#define CNT1 		2
++#define CNT2 		3
++#define CNT3 		4
++#define CNTMAX 		5
++
++#define CPU_COUNTER(cpu, counter)	((cpu) * CNTMAX + (counter))
++
++/*
++ * CNTENS: counters enable reg
++ */
++#define CNTENS_P0	(1 << 0)
++#define CNTENS_P1	(1 << 1)
++#define CNTENS_P2	(1 << 2)
++#define CNTENS_P3	(1 << 3)
++#define CNTENS_C	(1 << 31)
++#define	CNTENS_MASK	0x8000000f	/* Mask for writable bits */
++
++/*
++ * CNTENC: counters disable reg
++ */
++#define CNTENC_P0	(1 << 0)
++#define CNTENC_P1	(1 << 1)
++#define CNTENC_P2	(1 << 2)
++#define CNTENC_P3	(1 << 3)
++#define CNTENC_C	(1 << 31)
++#define	CNTENC_MASK	0x8000000f	/* Mask for writable bits */
++
++/*
++ * INTENS: counters overflow interrupt enable reg
++ */
++#define INTENS_P0	(1 << 0)
++#define INTENS_P1	(1 << 1)
++#define INTENS_P2	(1 << 2)
++#define INTENS_P3	(1 << 3)
++#define INTENS_C	(1 << 31)
++#define	INTENS_MASK	0x8000000f	/* Mask for writable bits */
++
++/*
++ * EVTSEL: Event selection reg
++ */
++#define	EVTSEL_MASK	0x7f		/* Mask for writable bits */
++
++/*
++ * SELECT: Counter selection reg
++ */
++#define	SELECT_MASK	0x1f		/* Mask for writable bits */
++
++/*
++ * FLAG: counters overflow flag status reg
++ */
++#define FLAG_P0		(1 << 0)
++#define FLAG_P1		(1 << 1)
++#define FLAG_P2		(1 << 2)
++#define FLAG_P3		(1 << 3)
++#define FLAG_C		(1 << 31)
++#define	FLAG_MASK	0x8000000f	/* Mask for writable bits */
++
++
++int armv7_setup_pmu(void);
++int armv7_start_pmu(void);
++int armv7_stop_pmu(void);
++int armv7_request_interrupts(int *, int);
++void armv7_release_interrupts(int *, int);
++
++#endif
+diff --git a/include/asm-arm/arch-omap/irqs.h 
+b/include/asm-arm/arch-omap/irqs.h
+index c80e160..89ca90e 100644
+--- a/include/asm-arm/arch-omap/irqs.h
++++ b/include/asm-arm/arch-omap/irqs.h
+@@ -297,6 +297,7 @@
+ #define INT_243X_HS_USB_DMA	93
+ #define INT_243X_CARKIT_IRQ	94
+ 
++#define	INT_34XX_BENCH_MPU_EMUL	3
+ #define INT_34XX_ST_MCBSP2_IRQ	4
+ #define INT_34XX_ST_MCBSP3_IRQ	5
+ #define INT_34XX_SYS_NIRQ	7