diff options
| author | Koen Kooi <koen@openembedded.org> | 2008-06-12 23:52:21 +0000 |
|---|---|---|
| committer | Koen Kooi <koen@openembedded.org> | 2008-06-12 23:52:21 +0000 |
| commit | ec73e0ba3910754256586703930355a4840e86a8 (patch) | |
| tree | 88688318b8ea1479b7b62332419f7903b4a067a7 /packages/linux/linux-omap2-git/omap3evm | |
| parent | 0d568f78cf0a449e5cf42d46201e30376d9e2364 (diff) | |
linux-omap2 git: update evm defconfig (thanks Steve!), clean up beagle patch dir, apply smartreflex and cpuidle patches to evm as well
Diffstat (limited to 'packages/linux/linux-omap2-git/omap3evm')
9 files changed, 3751 insertions, 478 deletions
diff --git a/packages/linux/linux-omap2-git/omap3evm/0001-ARM-OMAP-SmartReflex-driver.patch b/packages/linux/linux-omap2-git/omap3evm/0001-ARM-OMAP-SmartReflex-driver.patch new file mode 100644 index 0000000000..550a4f58be --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0001-ARM-OMAP-SmartReflex-driver.patch @@ -0,0 +1,1002 @@ +From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +To: linux-omap@vger.kernel.org +Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +Subject: [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files +Date: Mon, 2 Jun 2008 14:30:12 +0300 + +The following patch set integrates TI's SmartReflex driver. SmartReflex is a +module that adjusts OMAP3 VDD1 and VDD2 operating voltages around the nominal +values of current operating point depending on silicon characteristics and +operating conditions. + +The driver creates two sysfs entries into /sys/power/ named "sr_vdd1_autocomp" +and "sr_vdd2_autocomp" which can be used to activate SmartReflex modules 1 and +2. + +Use the following commands to enable SmartReflex: + +echo -n 1 > /sys/power/sr_vdd1_autocomp +echo -n 1 > /sys/power/sr_vdd2_autocomp + +To disable: + +echo -n 0 > /sys/power/sr_vdd1_autocomp +echo -n 0 > /sys/power/sr_vdd2_autocomp + +This particular patch adds the TI reference source and header files for +SmartReflex. Only modifications include minor styling to pass checkpatch.pl +test. + +Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +--- + arch/arm/mach-omap2/smartreflex.c | 815 +++++++++++++++++++++++++++++++++++++ + arch/arm/mach-omap2/smartreflex.h | 136 ++++++ + 2 files changed, 951 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/mach-omap2/smartreflex.c + create mode 100644 arch/arm/mach-omap2/smartreflex.h + +diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c +new file mode 100644 +index 0000000..dae7460 +--- /dev/null ++++ b/arch/arm/mach-omap2/smartreflex.c +@@ -0,0 +1,815 @@ ++/* ++ * linux/arch/arm/mach-omap3/smartreflex.c ++ * ++ * OMAP34XX SmartReflex Voltage Control ++ * ++ * Copyright (C) 2007 Texas Instruments, Inc. ++ * Lesly A M <x0080970@ti.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/clk.h> ++#include <linux/sysfs.h> ++ ++#include <asm/arch/prcm.h> ++#include <asm/arch/power_companion.h> ++#include <linux/io.h> ++ ++#include "prcm-regs.h" ++#include "smartreflex.h" ++ ++ ++/* #define DEBUG_SR 1 */ ++#ifdef DEBUG_SR ++# define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__ ,\ ++ ## args) ++#else ++# define DPRINTK(fmt, args...) ++#endif ++ ++struct omap_sr{ ++ int srid; ++ int is_sr_reset; ++ int is_autocomp_active; ++ struct clk *fck; ++ u32 req_opp_no; ++ u32 opp1_nvalue, opp2_nvalue, opp3_nvalue, opp4_nvalue, opp5_nvalue; ++ u32 senp_mod, senn_mod; ++ u32 srbase_addr; ++ u32 vpbase_addr; ++}; ++ ++static struct omap_sr sr1 = { ++ .srid = SR1, ++ .is_sr_reset = 1, ++ .is_autocomp_active = 0, ++ .srbase_addr = OMAP34XX_SR1_BASE, ++}; ++ ++static struct omap_sr sr2 = { ++ .srid = SR2, ++ .is_sr_reset = 1, ++ .is_autocomp_active = 0, ++ .srbase_addr = OMAP34XX_SR2_BASE, ++}; ++ ++static inline void sr_write_reg(struct omap_sr *sr, int offset, u32 value) ++{ ++ omap_writel(value, sr->srbase_addr + offset); ++} ++ ++static inline void sr_modify_reg(struct omap_sr *sr, int offset, u32 mask, ++ u32 value) ++{ ++ u32 reg_val; ++ ++ reg_val = omap_readl(sr->srbase_addr + offset); ++ reg_val &= ~mask; ++ reg_val |= value; ++ ++ omap_writel(reg_val, sr->srbase_addr + offset); ++} ++ ++static inline u32 sr_read_reg(struct omap_sr *sr, int offset) ++{ ++ return omap_readl(sr->srbase_addr + offset); ++} ++ ++ ++#ifndef USE_EFUSE_VALUES ++static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen) ++{ ++ u32 gn, rn, mul; ++ ++ for (gn = 0; gn < GAIN_MAXLIMIT; gn++) { ++ mul = 1 << (gn + 8); ++ rn = mul / sensor; ++ if (rn < R_MAXLIMIT) { ++ *sengain = gn; ++ *rnsen = rn; ++ } ++ } ++} ++#endif ++ ++static int sr_clk_enable(struct omap_sr *sr) ++{ ++ if (clk_enable(sr->fck) != 0) { ++ printk(KERN_ERR "Could not enable sr%d_fck\n", sr->srid); ++ goto clk_enable_err; ++ } ++ ++ /* set fclk- active , iclk- idle */ ++ sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK, ++ SR_CLKACTIVITY_IOFF_FON); ++ ++ return 0; ++ ++clk_enable_err: ++ return -1; ++} ++ ++static int sr_clk_disable(struct omap_sr *sr) ++{ ++ /* set fclk, iclk- idle */ ++ sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK, ++ SR_CLKACTIVITY_IOFF_FOFF); ++ ++ clk_disable(sr->fck); ++ sr->is_sr_reset = 1; ++ ++ return 0; ++} ++ ++static void sr_set_nvalues(struct omap_sr *sr) ++{ ++#ifdef USE_EFUSE_VALUES ++ u32 n1, n2; ++#else ++ u32 senpval, sennval; ++ u32 senpgain, senngain; ++ u32 rnsenp, rnsenn; ++#endif ++ ++ if (sr->srid == SR1) { ++#ifdef USE_EFUSE_VALUES ++ /* Read values for VDD1 from EFUSE */ ++#else ++ /* since E-Fuse Values are not available, calculating the ++ * reciprocal of the SenN and SenP values for SR1 ++ */ ++ sr->senp_mod = 0x03; /* SenN-M5 enabled */ ++ sr->senn_mod = 0x03; ++ ++ /* for OPP5 */ ++ senpval = 0x848 + 0x330; ++ sennval = 0xacd + 0x330; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp5_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ /* for OPP4 */ ++ senpval = 0x727 + 0x2a0; ++ sennval = 0x964 + 0x2a0; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp4_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ /* for OPP3 */ ++ senpval = 0x655 + 0x200; ++ sennval = 0x85b + 0x200; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp3_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ /* for OPP2 */ ++ senpval = 0x3be + 0x1a0; ++ sennval = 0x506 + 0x1a0; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp2_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ /* for OPP1 */ ++ senpval = 0x28c + 0x100; ++ sennval = 0x373 + 0x100; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp1_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ sr_clk_enable(sr); ++ sr_write_reg(sr, NVALUERECIPROCAL, sr->opp3_nvalue); ++ sr_clk_disable(sr); ++ ++#endif ++ } else if (sr->srid == SR2) { ++#ifdef USE_EFUSE_VALUES ++ /* Read values for VDD2 from EFUSE */ ++#else ++ /* since E-Fuse Values are not available, calculating the ++ * reciprocal of the SenN and SenP values for SR2 ++ */ ++ sr->senp_mod = 0x03; ++ sr->senn_mod = 0x03; ++ ++ /* for OPP3 */ ++ senpval = 0x579 + 0x200; ++ sennval = 0x76f + 0x200; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp3_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ /* for OPP2 */ ++ senpval = 0x390 + 0x1c0; ++ sennval = 0x4f5 + 0x1c0; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp2_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++ /* for OPP1 */ ++ senpval = 0x25d; ++ sennval = 0x359; ++ ++ cal_reciprocal(senpval, &senpgain, &rnsenp); ++ cal_reciprocal(sennval, &senngain, &rnsenn); ++ ++ sr->opp1_nvalue = ++ ((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) | ++ (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | ++ (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | ++ (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); ++ ++#endif ++ } ++ ++} ++ ++static void sr_configure_vp(int srid) ++{ ++ u32 vpconfig; ++ ++ if (srid == SR1) { ++ vpconfig = PRM_VP1_CONFIG_ERROROFFSET | PRM_VP1_CONFIG_ERRORGAIN ++ | PRM_VP1_CONFIG_INITVOLTAGE | PRM_VP1_CONFIG_TIMEOUTEN; ++ ++ PRM_VP1_CONFIG = vpconfig; ++ PRM_VP1_VSTEPMIN = PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN | ++ PRM_VP1_VSTEPMIN_VSTEPMIN; ++ ++ PRM_VP1_VSTEPMAX = PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX | ++ PRM_VP1_VSTEPMAX_VSTEPMAX; ++ ++ PRM_VP1_VLIMITTO = PRM_VP1_VLIMITTO_VDDMAX | ++ PRM_VP1_VLIMITTO_VDDMIN | PRM_VP1_VLIMITTO_TIMEOUT; ++ ++ PRM_VP1_CONFIG |= PRM_VP1_CONFIG_INITVDD; ++ PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_INITVDD; ++ ++ } else if (srid == SR2) { ++ vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN ++ | PRM_VP2_CONFIG_INITVOLTAGE | PRM_VP2_CONFIG_TIMEOUTEN; ++ ++ PRM_VP2_CONFIG = vpconfig; ++ PRM_VP2_VSTEPMIN = PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN | ++ PRM_VP2_VSTEPMIN_VSTEPMIN; ++ ++ PRM_VP2_VSTEPMAX = PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX | ++ PRM_VP2_VSTEPMAX_VSTEPMAX; ++ ++ PRM_VP2_VLIMITTO = PRM_VP2_VLIMITTO_VDDMAX | ++ PRM_VP2_VLIMITTO_VDDMIN | PRM_VP2_VLIMITTO_TIMEOUT; ++ ++ PRM_VP2_CONFIG |= PRM_VP2_CONFIG_INITVDD; ++ PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_INITVDD; ++ ++ } ++} ++ ++static void sr_configure_vc(void) ++{ ++ PRM_VC_SMPS_SA = ++ (R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA1_SHIFT) | ++ (R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA0_SHIFT); ++ ++ PRM_VC_SMPS_VOL_RA = (R_VDD2_SR_CONTROL << PRM_VC_SMPS_VOLRA1_SHIFT) | ++ (R_VDD1_SR_CONTROL << PRM_VC_SMPS_VOLRA0_SHIFT); ++ ++ PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL0_ON << PRM_VC_CMD_ON_SHIFT) | ++ (PRM_VC_CMD_VAL0_ONLP << PRM_VC_CMD_ONLP_SHIFT) | ++ (PRM_VC_CMD_VAL0_RET << PRM_VC_CMD_RET_SHIFT) | ++ (PRM_VC_CMD_VAL0_OFF << PRM_VC_CMD_OFF_SHIFT); ++ ++ PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL1_ON << PRM_VC_CMD_ON_SHIFT) | ++ (PRM_VC_CMD_VAL1_ONLP << PRM_VC_CMD_ONLP_SHIFT) | ++ (PRM_VC_CMD_VAL1_RET << PRM_VC_CMD_RET_SHIFT) | ++ (PRM_VC_CMD_VAL1_OFF << PRM_VC_CMD_OFF_SHIFT); ++ ++ PRM_VC_CH_CONF = PRM_VC_CH_CONF_CMD1 | PRM_VC_CH_CONF_RAV1; ++ ++ PRM_VC_I2C_CFG = PRM_VC_I2C_CFG_MCODE | PRM_VC_I2C_CFG_HSEN ++ | PRM_VC_I2C_CFG_SREN; ++ ++ /* Setup voltctrl and other setup times */ ++#ifdef CONFIG_SYSOFFMODE ++ PRM_VOLTCTRL = PRM_VOLTCTRL_AUTO_OFF | PRM_VOLTCTRL_AUTO_RET; ++ PRM_CLKSETUP = PRM_CLKSETUP_DURATION; ++ PRM_VOLTSETUP1 = (PRM_VOLTSETUP_TIME2 << PRM_VOLTSETUP_TIME2_OFFSET) | ++ (PRM_VOLTSETUP_TIME1 << PRM_VOLTSETUP_TIME1_OFFSET); ++ PRM_VOLTOFFSET = PRM_VOLTOFFSET_DURATION; ++ PRM_VOLTSETUP2 = PRM_VOLTSETUP2_DURATION; ++#else ++ PRM_VOLTCTRL |= PRM_VOLTCTRL_AUTO_RET; ++#endif ++ ++} ++ ++ ++static void sr_configure(struct omap_sr *sr) ++{ ++ u32 sys_clk, sr_clk_length = 0; ++ u32 sr_config; ++ u32 senp_en , senn_en; ++ ++ senp_en = sr->senp_mod; ++ senn_en = sr->senn_mod; ++ ++ sys_clk = prcm_get_system_clock_speed(); ++ ++ switch (sys_clk) { ++ case 12000: ++ sr_clk_length = SRCLKLENGTH_12MHZ_SYSCLK; ++ break; ++ case 13000: ++ sr_clk_length = SRCLKLENGTH_13MHZ_SYSCLK; ++ break; ++ case 19200: ++ sr_clk_length = SRCLKLENGTH_19MHZ_SYSCLK; ++ break; ++ case 26000: ++ sr_clk_length = SRCLKLENGTH_26MHZ_SYSCLK; ++ break; ++ case 38400: ++ sr_clk_length = SRCLKLENGTH_38MHZ_SYSCLK; ++ break; ++ default : ++ printk(KERN_ERR "Invalid sysclk value\n"); ++ break; ++ } ++ ++ DPRINTK(KERN_DEBUG "SR : sys clk %lu\n", sys_clk); ++ if (sr->srid == SR1) { ++ sr_config = SR1_SRCONFIG_ACCUMDATA | ++ (sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | ++ SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN | ++ SRCONFIG_MINMAXAVG_EN | ++ (senn_en << SRCONFIG_SENNENABLE_SHIFT) | ++ (senp_en << SRCONFIG_SENPENABLE_SHIFT) | ++ SRCONFIG_DELAYCTRL; ++ ++ sr_write_reg(sr, SRCONFIG, sr_config); ++ ++ sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT | ++ SR1_AVGWEIGHT_SENNAVGWEIGHT); ++ ++ sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK | ++ SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), ++ (SR1_ERRWEIGHT | SR1_ERRMAXLIMIT | SR1_ERRMINLIMIT)); ++ ++ } else if (sr->srid == SR2) { ++ sr_config = SR2_SRCONFIG_ACCUMDATA | ++ (sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | ++ SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN | ++ SRCONFIG_MINMAXAVG_EN | ++ (senn_en << SRCONFIG_SENNENABLE_SHIFT) | ++ (senp_en << SRCONFIG_SENPENABLE_SHIFT) | ++ SRCONFIG_DELAYCTRL; ++ ++ sr_write_reg(sr, SRCONFIG, sr_config); ++ ++ sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT | ++ SR2_AVGWEIGHT_SENNAVGWEIGHT); ++ ++ sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK | ++ SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), ++ (SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT)); ++ ++ } ++ sr->is_sr_reset = 0; ++} ++ ++static void sr_enable(struct omap_sr *sr, u32 target_opp_no) ++{ ++ u32 nvalue_reciprocal, current_nvalue; ++ ++ sr->req_opp_no = target_opp_no; ++ ++ if (sr->srid == SR1) { ++ switch (target_opp_no) { ++ case 5: ++ nvalue_reciprocal = sr->opp5_nvalue; ++ break; ++ case 4: ++ nvalue_reciprocal = sr->opp4_nvalue; ++ break; ++ case 3: ++ nvalue_reciprocal = sr->opp3_nvalue; ++ break; ++ case 2: ++ nvalue_reciprocal = sr->opp2_nvalue; ++ break; ++ case 1: ++ nvalue_reciprocal = sr->opp1_nvalue; ++ break; ++ default: ++ nvalue_reciprocal = sr->opp3_nvalue; ++ break; ++ } ++ } else { ++ switch (target_opp_no) { ++ case 3: ++ nvalue_reciprocal = sr->opp3_nvalue; ++ break; ++ case 2: ++ nvalue_reciprocal = sr->opp2_nvalue; ++ break; ++ case 1: ++ nvalue_reciprocal = sr->opp1_nvalue; ++ break; ++ default: ++ nvalue_reciprocal = sr->opp3_nvalue; ++ break; ++ } ++ } ++ ++ current_nvalue = sr_read_reg(sr, NVALUERECIPROCAL); ++ ++ if (current_nvalue == nvalue_reciprocal) { ++ DPRINTK("System is already at the desired voltage level\n"); ++ return; ++ } ++ ++ sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal); ++ ++ /* Enable the interrupt */ ++ sr_modify_reg(sr, ERRCONFIG, ++ (ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST), ++ (ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST)); ++ ++ if (sr->srid == SR1) { ++ /* Enable VP1 */ ++ PRM_VP1_CONFIG |= PRM_VP1_CONFIG_VPENABLE; ++ } else if (sr->srid == SR2) { ++ /* Enable VP2 */ ++ PRM_VP2_CONFIG |= PRM_VP2_CONFIG_VPENABLE; ++ } ++ ++ /* SRCONFIG - enable SR */ ++ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE); ++ ++} ++ ++static void sr_disable(struct omap_sr *sr) ++{ ++ sr->is_sr_reset = 1; ++ ++ /* SRCONFIG - disable SR */ ++ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ~SRCONFIG_SRENABLE); ++ ++ if (sr->srid == SR1) { ++ /* Enable VP1 */ ++ PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE; ++ } else if (sr->srid == SR2) { ++ /* Enable VP2 */ ++ PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE; ++ } ++} ++ ++ ++void sr_start_vddautocomap(int srid, u32 target_opp_no) ++{ ++ struct omap_sr *sr = NULL; ++ ++ if (srid == SR1) ++ sr = &sr1; ++ else if (srid == SR2) ++ sr = &sr2; ++ ++ if (sr->is_sr_reset == 1) { ++ sr_clk_enable(sr); ++ sr_configure(sr); ++ } ++ ++ if (sr->is_autocomp_active == 1) ++ DPRINTK(KERN_WARNING "SR%d: VDD autocomp is already active\n", ++ srid); ++ ++ sr->is_autocomp_active = 1; ++ sr_enable(sr, target_opp_no); ++} ++EXPORT_SYMBOL(sr_start_vddautocomap); ++ ++int sr_stop_vddautocomap(int srid) ++{ ++ struct omap_sr *sr = NULL; ++ ++ if (srid == SR1) ++ sr = &sr1; ++ else if (srid == SR2) ++ sr = &sr2; ++ ++ if (sr->is_autocomp_active == 1) { ++ sr_disable(sr); ++ sr_clk_disable(sr); ++ sr->is_autocomp_active = 0; ++ return SR_TRUE; ++ } else { ++ DPRINTK(KERN_WARNING "SR%d: VDD autocomp is not active\n", ++ srid); ++ return SR_FALSE; ++ } ++ ++} ++EXPORT_SYMBOL(sr_stop_vddautocomap); ++ ++void enable_smartreflex(int srid) ++{ ++ u32 target_opp_no = 0; ++ struct omap_sr *sr = NULL; ++ ++ if (srid == SR1) ++ sr = &sr1; ++ else if (srid == SR2) ++ sr = &sr2; ++ ++ if (sr->is_autocomp_active == 1) { ++ if (sr->is_sr_reset == 1) { ++ if (srid == SR1) { ++ /* Enable SR clks */ ++ CM_FCLKEN_WKUP |= SR1_CLK_ENABLE; ++ target_opp_no = get_opp_no(current_vdd1_opp); ++ ++ } else if (srid == SR2) { ++ /* Enable SR clks */ ++ CM_FCLKEN_WKUP |= SR2_CLK_ENABLE; ++ target_opp_no = get_opp_no(current_vdd2_opp); ++ } ++ ++ sr_configure(sr); ++ ++ sr_enable(sr, target_opp_no); ++ } ++ } ++} ++ ++void disable_smartreflex(int srid) ++{ ++ struct omap_sr *sr = NULL; ++ ++ if (srid == SR1) ++ sr = &sr1; ++ else if (srid == SR2) ++ sr = &sr2; ++ ++ if (sr->is_autocomp_active == 1) { ++ if (srid == SR1) { ++ /* Enable SR clk */ ++ CM_FCLKEN_WKUP |= SR1_CLK_ENABLE; ++ ++ } else if (srid == SR2) { ++ /* Enable SR clk */ ++ CM_FCLKEN_WKUP |= SR2_CLK_ENABLE; ++ } ++ ++ if (sr->is_sr_reset == 0) { ++ ++ sr->is_sr_reset = 1; ++ /* SRCONFIG - disable SR */ ++ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ++ ~SRCONFIG_SRENABLE); ++ ++ if (sr->srid == SR1) { ++ /* Disable SR clk */ ++ CM_FCLKEN_WKUP &= ~SR1_CLK_ENABLE; ++ /* Enable VP1 */ ++ PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE; ++ ++ } else if (sr->srid == SR2) { ++ /* Disable SR clk */ ++ CM_FCLKEN_WKUP &= ~SR2_CLK_ENABLE; ++ /* Enable VP2 */ ++ PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE; ++ } ++ } ++ } ++} ++ ++ ++/* Voltage Scaling using SR VCBYPASS */ ++int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel) ++{ ++ int ret; ++ int sr_status = 0; ++ u32 vdd, target_opp_no; ++ u32 vc_bypass_value; ++ u32 reg_addr = 0; ++ u32 loop_cnt = 0, retries_cnt = 0; ++ ++ vdd = get_vdd(target_opp); ++ target_opp_no = get_opp_no(target_opp); ++ ++ if (vdd == PRCM_VDD1) { ++ sr_status = sr_stop_vddautocomap(SR1); ++ ++ PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL_0 & ~PRM_VC_CMD_ON_MASK) | ++ (vsel << PRM_VC_CMD_ON_SHIFT); ++ reg_addr = R_VDD1_SR_CONTROL; ++ ++ } else if (vdd == PRCM_VDD2) { ++ sr_status = sr_stop_vddautocomap(SR2); ++ ++ PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL_1 & ~PRM_VC_CMD_ON_MASK) | ++ (vsel << PRM_VC_CMD_ON_SHIFT); ++ reg_addr = R_VDD2_SR_CONTROL; ++ } ++ ++ vc_bypass_value = (vsel << PRM_VC_BYPASS_DATA_SHIFT) | ++ (reg_addr << PRM_VC_BYPASS_REGADDR_SHIFT) | ++ (R_SRI2C_SLAVE_ADDR << PRM_VC_BYPASS_SLAVEADDR_SHIFT); ++ ++ PRM_VC_BYPASS_VAL = vc_bypass_value; ++ ++ PRM_VC_BYPASS_VAL |= PRM_VC_BYPASS_VALID; ++ ++ DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, PRM_VC_BYPASS_VAL); ++ DPRINTK("PRM_IRQST_MPU %X\n", PRM_IRQSTATUS_MPU); ++ ++ while ((PRM_VC_BYPASS_VAL & PRM_VC_BYPASS_VALID) != 0x0) { ++ ret = loop_wait(&loop_cnt, &retries_cnt, 10); ++ if (ret != PRCM_PASS) { ++ printk(KERN_INFO "Loop count exceeded in check SR I2C" ++ "write\n"); ++ return ret; ++ } ++ } ++ ++ omap_udelay(T2_SMPS_UPDATE_DELAY); ++ ++ if (sr_status) { ++ if (vdd == PRCM_VDD1) ++ sr_start_vddautocomap(SR1, target_opp_no); ++ else if (vdd == PRCM_VDD2) ++ sr_start_vddautocomap(SR2, target_opp_no); ++ } ++ ++ return SR_PASS; ++} ++ ++/* Sysfs interface to select SR VDD1 auto compensation */ ++static ssize_t omap_sr_vdd1_autocomp_show(struct kset *subsys, char *buf) ++{ ++ return sprintf(buf, "%d\n", sr1.is_autocomp_active); ++} ++ ++static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys, ++ const char *buf, size_t n) ++{ ++ u32 current_vdd1opp_no; ++ unsigned short value; ++ ++ if (sscanf(buf, "%hu", &value) != 1 || (value > 1)) { ++ printk(KERN_ERR "sr_vdd1_autocomp: Invalid value\n"); ++ return -EINVAL; ++ } ++ ++ current_vdd1opp_no = get_opp_no(current_vdd1_opp); ++ ++ if (value == 0) ++ sr_stop_vddautocomap(SR1); ++ else ++ sr_start_vddautocomap(SR1, current_vdd1opp_no); ++ ++ return n; ++} ++ ++static struct subsys_attribute sr_vdd1_autocomp = { ++ .attr = { ++ .name = __stringify(sr_vdd1_autocomp), ++ .mode = 0644, ++ }, ++ .show = omap_sr_vdd1_autocomp_show, ++ .store = omap_sr_vdd1_autocomp_store, ++}; ++ ++/* Sysfs interface to select SR VDD2 auto compensation */ ++static ssize_t omap_sr_vdd2_autocomp_show(struct kset *subsys, char *buf) ++{ ++ return sprintf(buf, "%d\n", sr2.is_autocomp_active); ++} ++ ++static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys, ++ const char *buf, size_t n) ++{ ++ u32 current_vdd2opp_no; ++ unsigned short value; ++ ++ if (sscanf(buf, "%hu", &value) != 1 || (value > 1)) { ++ printk(KERN_ERR "sr_vdd2_autocomp: Invalid value\n"); ++ return -EINVAL; ++ } ++ ++ current_vdd2opp_no = get_opp_no(current_vdd2_opp); ++ ++ if (value == 0) ++ sr_stop_vddautocomap(SR2); ++ else ++ sr_start_vddautocomap(SR2, current_vdd2opp_no); ++ ++ return n; ++} ++ ++static struct subsys_attribute sr_vdd2_autocomp = { ++ .attr = { ++ .name = __stringify(sr_vdd2_autocomp), ++ .mode = 0644, ++ }, ++ .show = omap_sr_vdd2_autocomp_show, ++ .store = omap_sr_vdd2_autocomp_store, ++}; ++ ++ ++ ++static int __init omap3_sr_init(void) ++{ ++ int ret = 0; ++ u8 RdReg; ++ ++#ifdef CONFIG_ARCH_OMAP34XX ++ sr1.fck = clk_get(NULL, "sr1_fck"); ++ if (IS_ERR(sr1.fck)) ++ printk(KERN_ERR "Could not get sr1_fck\n"); ++ ++ sr2.fck = clk_get(NULL, "sr2_fck"); ++ if (IS_ERR(sr2.fck)) ++ printk(KERN_ERR "Could not get sr2_fck\n"); ++#endif /* #ifdef CONFIG_ARCH_OMAP34XX */ ++ ++ /* Call the VPConfig, VCConfig, set N Values. */ ++ sr_set_nvalues(&sr1); ++ sr_configure_vp(SR1); ++ ++ sr_set_nvalues(&sr2); ++ sr_configure_vp(SR2); ++ ++ sr_configure_vc(); ++ ++ /* Enable SR on T2 */ ++ ret = t2_in(PM_RECEIVER, &RdReg, R_DCDC_GLOBAL_CFG); ++ RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX; ++ ret |= t2_out(PM_RECEIVER, RdReg, R_DCDC_GLOBAL_CFG); ++ ++ ++ printk(KERN_INFO "SmartReflex driver initialized\n"); ++ ++ ret = subsys_create_file(&power_subsys, &sr_vdd1_autocomp); ++ if (ret) ++ printk(KERN_ERR "subsys_create_file failed: %d\n", ret); ++ ++ ret = subsys_create_file(&power_subsys, &sr_vdd2_autocomp); ++ if (ret) ++ printk(KERN_ERR "subsys_create_file failed: %d\n", ret); ++ ++ return 0; ++} ++ ++arch_initcall(omap3_sr_init); +diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h +new file mode 100644 +index 0000000..62907ef +--- /dev/null ++++ b/arch/arm/mach-omap2/smartreflex.h +@@ -0,0 +1,136 @@ ++/* ++ * linux/arch/arm/mach-omap3/smartreflex.h ++ * ++ * Copyright (C) 2007 Texas Instruments, Inc. ++ * Lesly A M <x0080970@ti.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++/* SR Modules */ ++#define SR1 1 ++#define SR2 2 ++ ++#define SR_FAIL 1 ++#define SR_PASS 0 ++ ++#define SR_TRUE 1 ++#define SR_FALSE 0 ++ ++#define GAIN_MAXLIMIT 16 ++#define R_MAXLIMIT 256 ++ ++#define SR1_CLK_ENABLE (0x1 << 6) ++#define SR2_CLK_ENABLE (0x1 << 7) ++ ++/* PRM_VP1_CONFIG */ ++#define PRM_VP1_CONFIG_ERROROFFSET (0x00 << 24) ++#define PRM_VP1_CONFIG_ERRORGAIN (0x20 << 16) ++ ++#define PRM_VP1_CONFIG_INITVOLTAGE (0x30 << 8) /* 1.2 volt */ ++#define PRM_VP1_CONFIG_TIMEOUTEN (0x1 << 3) ++#define PRM_VP1_CONFIG_INITVDD (0x1 << 2) ++#define PRM_VP1_CONFIG_FORCEUPDATE (0x1 << 1) ++#define PRM_VP1_CONFIG_VPENABLE (0x1 << 0) ++ ++/* PRM_VP1_VSTEPMIN */ ++#define PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN (0x01F4 << 8) ++#define PRM_VP1_VSTEPMIN_VSTEPMIN (0x01 << 0) ++ ++/* PRM_VP1_VSTEPMAX */ ++#define PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX (0x01F4 << 8) ++#define PRM_VP1_VSTEPMAX_VSTEPMAX (0x04 << 0) ++ ++/* PRM_VP1_VLIMITTO */ ++#define PRM_VP1_VLIMITTO_VDDMAX (0x3C << 24) ++#define PRM_VP1_VLIMITTO_VDDMIN (0x0 << 16) ++#define PRM_VP1_VLIMITTO_TIMEOUT (0xFFFF << 0) ++ ++/* PRM_VP2_CONFIG */ ++#define PRM_VP2_CONFIG_ERROROFFSET (0x00 << 24) ++#define PRM_VP2_CONFIG_ERRORGAIN (0x20 << 16) ++ ++#define PRM_VP2_CONFIG_INITVOLTAGE (0x30 << 8) /* 1.2 volt */ ++#define PRM_VP2_CONFIG_TIMEOUTEN (0x1 << 3) ++#define PRM_VP2_CONFIG_INITVDD (0x1 << 2) ++#define PRM_VP2_CONFIG_FORCEUPDATE (0x1 << 1) ++#define PRM_VP2_CONFIG_VPENABLE (0x1 << 0) ++ ++/* PRM_VP2_VSTEPMIN */ ++#define PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN (0x01F4 << 8) ++#define PRM_VP2_VSTEPMIN_VSTEPMIN (0x01 << 0) ++ ++/* PRM_VP2_VSTEPMAX */ ++#define PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX (0x01F4 << 8) ++#define PRM_VP2_VSTEPMAX_VSTEPMAX (0x04 << 0) ++ ++/* PRM_VP2_VLIMITTO */ ++#define PRM_VP2_VLIMITTO_VDDMAX (0x2C << 24) ++#define PRM_VP2_VLIMITTO_VDDMIN (0x0 << 16) ++#define PRM_VP2_VLIMITTO_TIMEOUT (0xFFFF << 0) ++ ++/* SRCONFIG */ ++#define SR1_SRCONFIG_ACCUMDATA (0x1F4 << 22) ++#define SR2_SRCONFIG_ACCUMDATA (0x1F4 << 22) ++ ++#define SRCLKLENGTH_12MHZ_SYSCLK 0x3C ++#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 ++#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 ++#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 ++#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 ++ ++#define SRCONFIG_SRCLKLENGTH_SHIFT 12 ++#define SRCONFIG_SENNENABLE_SHIFT 5 ++#define SRCONFIG_SENPENABLE_SHIFT 3 ++ ++#define SRCONFIG_SRENABLE (0x01 << 11) ++#define SRCONFIG_SENENABLE (0x01 << 10) ++#define SRCONFIG_ERRGEN_EN (0x01 << 9) ++#define SRCONFIG_MINMAXAVG_EN (0x01 << 8) ++ ++#define SRCONFIG_DELAYCTRL (0x01 << 2) ++#define SRCONFIG_CLKCTRL (0x00 << 0) ++ ++/* AVGWEIGHT */ ++#define SR1_AVGWEIGHT_SENPAVGWEIGHT (0x03 << 2) ++#define SR1_AVGWEIGHT_SENNAVGWEIGHT (0x03 << 0) ++ ++#define SR2_AVGWEIGHT_SENPAVGWEIGHT (0x01 << 2) ++#define SR2_AVGWEIGHT_SENNAVGWEIGHT (0x01 << 0) ++ ++/* NVALUERECIPROCAL */ ++#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 ++#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 ++#define NVALUERECIPROCAL_RNSENP_SHIFT 8 ++#define NVALUERECIPROCAL_RNSENN_SHIFT 0 ++ ++/* ERRCONFIG */ ++#define SR_CLKACTIVITY_MASK (0x03 << 20) ++#define SR_ERRWEIGHT_MASK (0x07 << 16) ++#define SR_ERRMAXLIMIT_MASK (0xFF << 8) ++#define SR_ERRMINLIMIT_MASK (0xFF << 0) ++ ++#define SR_CLKACTIVITY_IOFF_FOFF (0x00 << 20) ++#define SR_CLKACTIVITY_IOFF_FON (0x02 << 20) ++ ++#define ERRCONFIG_VPBOUNDINTEN (0x1 << 31) ++#define ERRCONFIG_VPBOUNDINTST (0x1 << 30) ++ ++#define SR1_ERRWEIGHT (0x07 << 16) ++#define SR1_ERRMAXLIMIT (0x02 << 8) ++#define SR1_ERRMINLIMIT (0xFA << 0) ++ ++#define SR2_ERRWEIGHT (0x07 << 16) ++#define SR2_ERRMAXLIMIT (0x02 << 8) ++#define SR2_ERRMINLIMIT (0xF9 << 0) ++ ++extern u32 current_vdd1_opp; ++extern u32 current_vdd2_opp; ++extern struct kset power_subsys; ++ ++extern inline int loop_wait(u32 *lcnt, u32 *rcnt, u32 delay); ++extern void omap_udelay(u32 udelay); ++ +-- +1.5.4.3 diff --git a/packages/linux/linux-omap2-git/omap3evm/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch b/packages/linux/linux-omap2-git/omap3evm/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch new file mode 100644 index 0000000000..6e31ead2bd --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch @@ -0,0 +1,55 @@ +From a1dbb6dd28e9815a307b87b8d96dcf371d6cfd58 Mon Sep 17 00:00:00 2001 +From: Jarkko Nikula <jarkko.nikula@nokia.com> +Date: Mon, 19 May 2008 13:24:41 +0300 +Subject: [PATCH] ASoC: OMAP: Add basic support for OMAP34xx in McBSP DAI driver + +This adds support for OMAP34xx McBSP port 1 and 2. + +Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> +--- + sound/soc/omap/omap-mcbsp.c | 20 +++++++++++++++++++- + 1 files changed, 19 insertions(+), 1 deletions(-) + +diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c +index 40d87e6..8e6ec9d 100644 +--- a/sound/soc/omap/omap-mcbsp.c ++++ b/sound/soc/omap/omap-mcbsp.c +@@ -99,6 +99,21 @@ static const unsigned long omap2420_mcbsp_port[][2] = { + static const int omap2420_dma_reqs[][2] = {}; + static const unsigned long omap2420_mcbsp_port[][2] = {}; + #endif ++#if defined(CONFIG_ARCH_OMAP34XX) ++static const int omap34xx_dma_reqs[][2] = { ++ { OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX }, ++ { OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX }, ++}; ++static const unsigned long omap34xx_mcbsp_port[][2] = { ++ { OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR2, ++ OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR2 }, ++ { OMAP34XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR2, ++ OMAP34XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR2 }, ++}; ++#else ++static const int omap34xx_dma_reqs[][2] = {}; ++static const unsigned long omap34xx_mcbsp_port[][2] = {}; ++#endif + + static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream) + { +@@ -169,9 +184,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, + } else if (cpu_is_omap2420()) { + dma = omap2420_dma_reqs[bus_id][substream->stream]; + port = omap2420_mcbsp_port[bus_id][substream->stream]; ++ } else if (cpu_is_omap343x()) { ++ dma = omap34xx_dma_reqs[bus_id][substream->stream]; ++ port = omap34xx_mcbsp_port[bus_id][substream->stream]; + } else { + /* +- * TODO: Add support for 2430 and 3430 ++ * TODO: Add support for 2430 + */ + return -ENODEV; + } +-- +1.5.5.1 + diff --git a/packages/linux/linux-omap2-git/omap3evm/0001-omap3-cpuidle.patch b/packages/linux/linux-omap2-git/omap3evm/0001-omap3-cpuidle.patch new file mode 100644 index 0000000000..28b1ef2214 --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0001-omap3-cpuidle.patch @@ -0,0 +1,450 @@ +From: "Rajendra Nayak" <rnayak@ti.com>
+To: <linux-omap@vger.kernel.org>
+Subject: [PATCH 01/02] OMAP3 CPUidle driver
+Date: Tue, 10 Jun 2008 12:39:00 +0530
+
+This patch adds the OMAP3 cpuidle driver. Irq enable/disable is done in the core cpuidle driver
+before it queries the governor for the next state.
+
+Signed-off-by: Rajendra Nayak <rnayak@ti.com>
+
+---
+ arch/arm/mach-omap2/Makefile | 2
+ arch/arm/mach-omap2/cpuidle34xx.c | 293 ++++++++++++++++++++++++++++++++++++++
+ arch/arm/mach-omap2/cpuidle34xx.h | 51 ++++++
+ arch/arm/mach-omap2/pm34xx.c | 5
+ drivers/cpuidle/cpuidle.c | 10 +
+ 5 files changed, 359 insertions(+), 2 deletions(-)
+
+Index: linux-omap-2.6/arch/arm/mach-omap2/Makefile
+===================================================================
+--- linux-omap-2.6.orig/arch/arm/mach-omap2/Makefile 2008-06-09 20:15:33.855303920 +0530
++++ linux-omap-2.6/arch/arm/mach-omap2/Makefile 2008-06-09 20:15:39.569121361 +0530
+@@ -20,7 +20,7 @@ obj-y += pm.o
+ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
+ obj-$(CONFIG_ARCH_OMAP2420) += sleep242x.o
+ obj-$(CONFIG_ARCH_OMAP2430) += sleep243x.o
+-obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
++obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
+ obj-$(CONFIG_PM_DEBUG) += pm-debug.o
+ endif
+
+Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c 2008-06-10 11:41:27.644820323 +0530
+@@ -0,0 +1,293 @@
++/*
++ * linux/arch/arm/mach-omap2/cpuidle34xx.c
++ *
++ * OMAP3 CPU IDLE Routines
++ *
++ * Copyright (C) 2007-2008 Texas Instruments, Inc.
++ * Rajendra Nayak <rnayak@ti.com>
++ *
++ * Copyright (C) 2007 Texas Instruments, Inc.
++ * Karthik Dasu <karthik-dp@ti.com>
++ *
++ * Copyright (C) 2006 Nokia Corporation
++ * Tony Lindgren <tony@atomide.com>
++ *
++ * Copyright (C) 2005 Texas Instruments, Inc.
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/cpuidle.h>
++#include <asm/arch/pm.h>
++#include <asm/arch/prcm.h>
++#include <asm/arch/powerdomain.h>
++#include <asm/arch/clockdomain.h>
++#include <asm/arch/irqs.h>
++#include "cpuidle34xx.h"
++
++#ifdef CONFIG_CPU_IDLE
++
++struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
++struct omap3_processor_cx current_cx_state;
++
++static int omap3_idle_bm_check(void)
++{
++ /* Check for omap3_fclks_active() here once available */
++ return 0;
++}
++
++/* omap3_enter_idle - Programs OMAP3 to enter the specified state.
++ * returns the total time during which the system was idle.
++ */
++static int omap3_enter_idle(struct cpuidle_device *dev,
++ struct cpuidle_state *state)
++{
++ struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
++ struct timespec ts_preidle, ts_postidle, ts_idle;
++ struct powerdomain *mpu_pd, *core_pd, *per_pd, *neon_pd;
++ int neon_pwrst;
++
++ current_cx_state = *cx;
++
++ if (cx->type == OMAP3_STATE_C0) {
++ /* Do nothing for C0, not even a wfi */
++ return 0;
++ }
++
++ /* Used to keep track of the total time in idle */
++ getnstimeofday(&ts_preidle);
++
++ mpu_pd = pwrdm_lookup("mpu_pwrdm");
++ core_pd = pwrdm_lookup("core_pwrdm");
++ per_pd = pwrdm_lookup("per_pwrdm");
++ neon_pd = pwrdm_lookup("neon_pwrdm");
++
++ /* Reset previous power state registers */
++ pwrdm_clear_all_prev_pwrst(mpu_pd);
++ pwrdm_clear_all_prev_pwrst(neon_pd);
++ pwrdm_clear_all_prev_pwrst(core_pd);
++ pwrdm_clear_all_prev_pwrst(per_pd);
++
++ if (omap_irq_pending())
++ return 0;
++
++ neon_pwrst = pwrdm_read_pwrst(neon_pd);
++
++ /* Program MPU/NEON to target state */
++ if (cx->mpu_state < PWRDM_POWER_ON) {
++ if (neon_pwrst == PWRDM_POWER_ON) {
++ if (cx->mpu_state == PWRDM_POWER_RET)
++ pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_RET);
++ else if (cx->mpu_state == PWRDM_POWER_OFF)
++ pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_OFF);
++ }
++ pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
++ }
++
++ /* Program CORE to target state */
++ if (cx->core_state < PWRDM_POWER_ON)
++ pwrdm_set_next_pwrst(core_pd, cx->core_state);
++
++ /* Execute ARM wfi */
++ omap_sram_idle();
++
++ /* Program MPU/NEON to ON */
++ if (cx->mpu_state < PWRDM_POWER_ON) {
++ if (neon_pwrst == PWRDM_POWER_ON)
++ pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_ON);
++ pwrdm_set_next_pwrst(mpu_pd, PWRDM_POWER_ON);
++ }
++
++ if (cx->core_state < PWRDM_POWER_ON)
++ pwrdm_set_next_pwrst(core_pd, PWRDM_POWER_ON);
++
++ getnstimeofday(&ts_postidle);
++ ts_idle = timespec_sub(ts_postidle, ts_preidle);
++ return timespec_to_ns(&ts_idle);
++}
++
++/*
++ * omap3_enter_idle_bm - enter function for states with CPUIDLE_FLAG_CHECK_BM
++ *
++ * This function checks for all the pre-requisites needed for OMAP3 to enter
++ * CORE RET/OFF state. It then calls omap3_enter_idle to program the desired
++ * C state.
++ */
++static int omap3_enter_idle_bm(struct cpuidle_device *dev,
++ struct cpuidle_state *state)
++{
++ struct cpuidle_state *new_state = NULL;
++ int i, j;
++
++ if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
++
++ /* Find current state in list */
++ for (i = 0; i < OMAP3_MAX_STATES; i++)
++ if (state == &dev->states[i])
++ break;
++ BUG_ON(i == OMAP3_MAX_STATES);
++
++ /* Back up to non 'CHECK_BM' state */
++ for (j = i - 1; j > 0; j--) {
++ struct cpuidle_state *s = &dev->states[j];
++
++ if (!(s->flags & CPUIDLE_FLAG_CHECK_BM)) {
++ new_state = s;
++ break;
++ }
++ }
++
++ pr_debug("%s: Bus activity: Entering %s (instead of %s)\n",
++ __FUNCTION__, new_state->name, state->name);
++ }
++
++ return omap3_enter_idle(dev, new_state ? : state);
++}
++
++DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
++
++/* omap3_init_power_states - Initialises the OMAP3 specific C states.
++ * Below is the desciption of each C state.
++ *
++ C0 . System executing code
++ C1 . MPU WFI + Core active
++ C2 . MPU CSWR + Core active
++ C3 . MPU OFF + Core active
++ C4 . MPU CSWR + Core CSWR
++ C5 . MPU OFF + Core CSWR
++ C6 . MPU OFF + Core OFF
++ */
++void omap_init_power_states(void)
++{
++ /* C0 . System executing code */
++ omap3_power_states[0].valid = 1;
++ omap3_power_states[0].type = OMAP3_STATE_C0;
++ omap3_power_states[0].sleep_latency = 0;
++ omap3_power_states[0].wakeup_latency = 0;
++ omap3_power_states[0].threshold = 0;
++ omap3_power_states[0].mpu_state = PWRDM_POWER_ON;
++ omap3_power_states[0].core_state = PWRDM_POWER_ON;
++ omap3_power_states[0].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_SHALLOW;
++
++ /* C1 . MPU WFI + Core active */
++ omap3_power_states[1].valid = 1;
++ omap3_power_states[1].type = OMAP3_STATE_C1;
++ omap3_power_states[1].sleep_latency = 10;
++ omap3_power_states[1].wakeup_latency = 10;
++ omap3_power_states[1].threshold = 30;
++ omap3_power_states[1].mpu_state = PWRDM_POWER_ON;
++ omap3_power_states[1].core_state = PWRDM_POWER_ON;
++ omap3_power_states[1].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_SHALLOW;
++
++ /* C2 . MPU CSWR + Core active */
++ omap3_power_states[2].valid = 1;
++ omap3_power_states[2].type = OMAP3_STATE_C2;
++ omap3_power_states[2].sleep_latency = 50;
++ omap3_power_states[2].wakeup_latency = 50;
++ omap3_power_states[2].threshold = 300;
++ omap3_power_states[2].mpu_state = PWRDM_POWER_RET;
++ omap3_power_states[2].core_state = PWRDM_POWER_ON;
++ omap3_power_states[2].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_BALANCED;
++
++ /* C3 . MPU OFF + Core active */
++ omap3_power_states[3].valid = 0;
++ omap3_power_states[3].type = OMAP3_STATE_C3;
++ omap3_power_states[3].sleep_latency = 1500;
++ omap3_power_states[3].wakeup_latency = 1800;
++ omap3_power_states[3].threshold = 4000;
++ omap3_power_states[3].mpu_state = PWRDM_POWER_OFF;
++ omap3_power_states[3].core_state = PWRDM_POWER_RET;
++ omap3_power_states[3].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_BALANCED;
++
++ /* C4 . MPU CSWR + Core CSWR*/
++ omap3_power_states[4].valid = 1;
++ omap3_power_states[4].type = OMAP3_STATE_C4;
++ omap3_power_states[4].sleep_latency = 2500;
++ omap3_power_states[4].wakeup_latency = 7500;
++ omap3_power_states[4].threshold = 12000;
++ omap3_power_states[4].mpu_state = PWRDM_POWER_RET;
++ omap3_power_states[4].core_state = PWRDM_POWER_RET;
++ omap3_power_states[4].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_BALANCED | CPUIDLE_FLAG_CHECK_BM;
++
++ /* C5 . MPU OFF + Core CSWR */
++ omap3_power_states[5].valid = 0;
++ omap3_power_states[5].type = OMAP3_STATE_C5;
++ omap3_power_states[5].sleep_latency = 3000;
++ omap3_power_states[5].wakeup_latency = 8500;
++ omap3_power_states[5].threshold = 15000;
++ omap3_power_states[5].mpu_state = PWRDM_POWER_OFF;
++ omap3_power_states[5].core_state = PWRDM_POWER_RET;
++ omap3_power_states[5].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_BALANCED | CPUIDLE_FLAG_CHECK_BM;
++
++ /* C6 . MPU OFF + Core OFF */
++ omap3_power_states[6].valid = 0;
++ omap3_power_states[6].type = OMAP3_STATE_C6;
++ omap3_power_states[6].sleep_latency = 10000;
++ omap3_power_states[6].wakeup_latency = 30000;
++ omap3_power_states[6].threshold = 300000;
++ omap3_power_states[6].mpu_state = PWRDM_POWER_OFF;
++ omap3_power_states[6].core_state = PWRDM_POWER_OFF;
++ omap3_power_states[6].flags = CPUIDLE_FLAG_TIME_VALID |
++ CPUIDLE_FLAG_DEEP | CPUIDLE_FLAG_CHECK_BM;
++}
++
++struct cpuidle_driver omap3_idle_driver = {
++ .name = "omap3_idle",
++ .owner = THIS_MODULE,
++};
++/*
++ * omap3_idle_init - Init routine for OMAP3 idle.
++ * Registers the OMAP3 specific cpuidle driver with the cpuidle f/w
++ * with the valid set of states.
++ */
++int omap3_idle_init(void)
++{
++ int i, count = 0;
++ struct omap3_processor_cx *cx;
++ struct cpuidle_state *state;
++ struct cpuidle_device *dev;
++
++ omap_init_power_states();
++ cpuidle_register_driver(&omap3_idle_driver);
++
++ dev = &per_cpu(omap3_idle_dev, smp_processor_id());
++
++ for (i = 0; i < OMAP3_MAX_STATES; i++) {
++ cx = &omap3_power_states[i];
++ state = &dev->states[count];
++
++ if (!cx->valid)
++ continue;
++ cpuidle_set_statedata(state, cx);
++ state->exit_latency = cx->sleep_latency + cx->wakeup_latency;
++ state->target_residency = cx->threshold;
++ state->flags = cx->flags;
++ state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ?
++ omap3_enter_idle_bm : omap3_enter_idle;
++ sprintf(state->name, "C%d", count+1);
++ count++;
++ }
++
++ if (!count)
++ return -EINVAL;
++ dev->state_count = count;
++
++ if (cpuidle_register_device(dev)) {
++ printk(KERN_ERR "%s: CPUidle register device failed\n",
++ __FUNCTION__);
++ return -EIO;
++ }
++
++ return 0;
++}
++__initcall(omap3_idle_init);
++#endif /* CONFIG_CPU_IDLE */
+Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.h 2008-06-09 20:15:39.569121361 +0530
+@@ -0,0 +1,51 @@
++/*
++ * linux/arch/arm/mach-omap2/cpuidle34xx.h
++ *
++ * OMAP3 cpuidle structure definitions
++ *
++ * Copyright (C) 2007-2008 Texas Instruments, Inc.
++ * Written by Rajendra Nayak <rnayak@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++ *
++ * History:
++ *
++ */
++
++#ifndef ARCH_ARM_MACH_OMAP2_CPUIDLE_34XX
++#define ARCH_ARM_MACH_OMAP2_CPUIDLE_34XX
++
++#define OMAP3_MAX_STATES 7
++#define OMAP3_STATE_C0 0 /* C0 - System executing code */
++#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */
++#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */
++#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */
++#define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */
++#define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */
++#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */
++
++extern void omap_sram_idle(void);
++extern int omap3_irq_pending(void);
++
++struct omap3_processor_cx {
++ u8 valid;
++ u8 type;
++ u32 sleep_latency;
++ u32 wakeup_latency;
++ u32 mpu_state;
++ u32 core_state;
++ u32 threshold;
++ u32 flags;
++};
++
++void omap_init_power_states(void);
++int omap3_idle_init(void);
++
++#endif /* ARCH_ARM_MACH_OMAP2_CPUIDLE_34XX */
++
+Index: linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c
+===================================================================
+--- linux-omap-2.6.orig/arch/arm/mach-omap2/pm34xx.c 2008-06-09 20:15:33.855303920 +0530
++++ linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c 2008-06-09 20:16:20.976798343 +0530
+@@ -141,7 +141,7 @@ static irqreturn_t prcm_interrupt_handle
+ return IRQ_HANDLED;
+ }
+
+-static void omap_sram_idle(void)
++void omap_sram_idle(void)
+ {
+ /* Variable to tell what needs to be saved and restored
+ * in omap_sram_idle*/
+@@ -156,6 +156,7 @@ static void omap_sram_idle(void)
+
+ mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ switch (mpu_next_state) {
++ case PWRDM_POWER_ON:
+ case PWRDM_POWER_RET:
+ /* No need to save context */
+ save_state = 0;
+@@ -386,7 +387,9 @@ int __init omap3_pm_init(void)
+
+ prcm_setup_regs();
+
++#ifndef CONFIG_CPU_IDLE
+ pm_idle = omap3_pm_idle;
++#endif
+
+ err1:
+ return ret;
+Index: linux-omap-2.6/drivers/cpuidle/cpuidle.c
+===================================================================
+--- linux-omap-2.6.orig/drivers/cpuidle/cpuidle.c 2008-06-09 20:15:33.856303888 +0530
++++ linux-omap-2.6/drivers/cpuidle/cpuidle.c 2008-06-09 20:15:39.570121329 +0530
+@@ -58,6 +58,11 @@ static void cpuidle_idle_call(void)
+ return;
+ }
+
++#ifdef CONFIG_ARCH_OMAP3
++ local_irq_disable();
++ local_fiq_disable();
++#endif
++
+ /* ask the governor for the next state */
+ next_state = cpuidle_curr_governor->select(dev);
+ if (need_resched())
+@@ -70,6 +75,11 @@ static void cpuidle_idle_call(void)
+ target_state->time += (unsigned long long)dev->last_residency;
+ target_state->usage++;
+
++#ifdef CONFIG_ARCH_OMAP3
++ local_irq_enable();
++ local_fiq_enable();
++#endif
++
+ /* give the governor an opportunity to reflect on the outcome */
+ if (cpuidle_curr_governor->reflect)
+ cpuidle_curr_governor->reflect(dev);
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap2-git/omap3evm/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch b/packages/linux/linux-omap2-git/omap3evm/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch new file mode 100644 index 0000000000..17329be29b --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch @@ -0,0 +1,69 @@ +From 7a444ee080c5f1a62ac5042f1e7926622b3e1ce7 Mon Sep 17 00:00:00 2001 +From: Koen Kooi <koen@openembedded.org> +Date: Fri, 30 May 2008 13:43:36 +0200 +Subject: [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver + +omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver + * on revision A5 and earlier board the two leds can't be controlled seperately, should be fixed in rev. B and C boards. + +Signed-off-by: Koen Kooi <koen@openembedded.org> +--- + arch/arm/mach-omap2/board-omap3beagle.c | 28 ++++++++++++++++++++++++++++ + 1 files changed, 28 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index c992cc7..83891fc 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -19,6 +19,7 @@ + #include <linux/err.h> + #include <linux/clk.h> + #include <linux/io.h> ++#include <linux/leds.h> + + #include <asm/hardware.h> + #include <asm/mach-types.h> +@@ -72,6 +73,32 @@ static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", + }; + ++struct gpio_led gpio_leds[] = { ++ { ++ .name = "beagleboard::led0", ++ .default_trigger = "none", ++ .gpio = 149, ++ }, ++ { ++ .name = "beagleboard::led1", ++ .default_trigger = "none", ++ .gpio = 150, ++ }, ++}; ++ ++static struct gpio_led_platform_data gpio_led_info = { ++ .leds = gpio_leds, ++ .num_leds = ARRAY_SIZE(gpio_leds), ++}; ++ ++static struct platform_device leds_gpio = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = &gpio_led_info, ++ }, ++}; ++ + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, + { OMAP_TAG_MMC, &omap3beagle_mmc_config }, +@@ -83,6 +110,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { + #ifdef CONFIG_RTC_DRV_TWL4030 + &omap3_beagle_twl4030rtc_device, + #endif ++ &leds_gpio, + }; + + static void __init omap3_beagle_init(void) +-- +1.5.4.3 + diff --git a/packages/linux/linux-omap2-git/omap3evm/0002-ARM-OMAP-SmartReflex-driver.patch b/packages/linux/linux-omap2-git/omap3evm/0002-ARM-OMAP-SmartReflex-driver.patch new file mode 100644 index 0000000000..bdf9e293d6 --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0002-ARM-OMAP-SmartReflex-driver.patch @@ -0,0 +1,278 @@ +From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +To: linux-omap@vger.kernel.org +Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +Subject: [PATCH 2/3] ARM: OMAP: SmartReflex driver: added required register and bit definitions. +Date: Fri, 6 Jun 2008 12:49:48 +0300 + +Added new register and bit definitions to enable Smartreflex driver integration. +Also PRM_VC_SMPS_SA bit definitions' naming was changed to match the naming of +other similar bit definitions. + +Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +--- + arch/arm/mach-omap2/prm-regbits-34xx.h | 27 ++++++-- + arch/arm/mach-omap2/smartreflex.h | 124 ++++++++++++++++++++++++++++++- + include/asm-arm/arch-omap/control.h | 19 +++++ + include/asm-arm/arch-omap/omap34xx.h | 2 + + 4 files changed, 163 insertions(+), 9 deletions(-) + +diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h +index c6a7940..f82b5a7 100644 +--- a/arch/arm/mach-omap2/prm-regbits-34xx.h ++++ b/arch/arm/mach-omap2/prm-regbits-34xx.h +@@ -435,10 +435,10 @@ + /* PM_PWSTST_EMU specific bits */ + + /* PRM_VC_SMPS_SA */ +-#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT 16 +-#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK (0x7f << 16) +-#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT 0 +-#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK (0x7f << 0) ++#define OMAP3430_SMPS_SA1_SHIFT 16 ++#define OMAP3430_SMPS_SA1_MASK (0x7f << 16) ++#define OMAP3430_SMPS_SA0_SHIFT 0 ++#define OMAP3430_SMPS_SA0_MASK (0x7f << 0) + + /* PRM_VC_SMPS_VOL_RA */ + #define OMAP3430_VOLRA1_SHIFT 16 +@@ -452,7 +452,7 @@ + #define OMAP3430_CMDRA0_SHIFT 0 + #define OMAP3430_CMDRA0_MASK (0xff << 0) + +-/* PRM_VC_CMD_VAL_0 specific bits */ ++/* PRM_VC_CMD_VAL */ + #define OMAP3430_VC_CMD_ON_SHIFT 24 + #define OMAP3430_VC_CMD_ON_MASK (0xFF << 24) + #define OMAP3430_VC_CMD_ONLP_SHIFT 16 +@@ -462,7 +462,17 @@ + #define OMAP3430_VC_CMD_OFF_SHIFT 0 + #define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0) + ++/* PRM_VC_CMD_VAL_0 specific bits */ ++#define OMAP3430_VC_CMD_VAL0_ON (0x3 << 4) ++#define OMAP3430_VC_CMD_VAL0_ONLP (0x3 << 3) ++#define OMAP3430_VC_CMD_VAL0_RET (0x3 << 3) ++#define OMAP3430_VC_CMD_VAL0_OFF (0x3 << 3) ++ + /* PRM_VC_CMD_VAL_1 specific bits */ ++#define OMAP3430_VC_CMD_VAL1_ON (0xB << 2) ++#define OMAP3430_VC_CMD_VAL1_ONLP (0x3 << 3) ++#define OMAP3430_VC_CMD_VAL1_RET (0x3 << 3) ++#define OMAP3430_VC_CMD_VAL1_OFF (0x3 << 3) + + /* PRM_VC_CH_CONF */ + #define OMAP3430_CMD1 (1 << 20) +@@ -521,6 +531,13 @@ + #define OMAP3430_AUTO_RET (1 << 1) + #define OMAP3430_AUTO_SLEEP (1 << 0) + ++/* Constants to define setup durations */ ++#define OMAP3430_CLKSETUP_DURATION 0xff ++#define OMAP3430_VOLTSETUP_TIME2 0xfff ++#define OMAP3430_VOLTSETUP_TIME1 0xfff ++#define OMAP3430_VOLTOFFSET_DURATION 0xff ++#define OMAP3430_VOLTSETUP2_DURATION 0xff ++ + /* PRM_SRAM_PCHARGE */ + #define OMAP3430_PCHARGE_TIME_SHIFT 0 + #define OMAP3430_PCHARGE_TIME_MASK (0xff << 0) +diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h +index 62907ef..2091a15 100644 +--- a/arch/arm/mach-omap2/smartreflex.h ++++ b/arch/arm/mach-omap2/smartreflex.h +@@ -1,5 +1,10 @@ ++#ifndef __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H ++#define __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H + /* +- * linux/arch/arm/mach-omap3/smartreflex.h ++ * linux/arch/arm/mach-omap2/smartreflex.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M <x0080970@ti.com> +@@ -9,6 +14,21 @@ + * published by the Free Software Foundation. + */ + ++#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) ++#define PHY_TO_OFF_PM_RECIEVER(p) (p - 0x5b) ++#define PHY_TO_OFF_PM_INT(p) (p - 0x2e) ++ ++/* SMART REFLEX REG ADDRESS OFFSET */ ++#define SRCONFIG 0x00 ++#define SRSTATUS 0x04 ++#define SENVAL 0x08 ++#define SENMIN 0x0C ++#define SENMAX 0x10 ++#define SENAVG 0x14 ++#define AVGWEIGHT 0x18 ++#define NVALUERECIPROCAL 0x1C ++#define SENERROR 0x20 ++#define ERRCONFIG 0x24 + + /* SR Modules */ + #define SR1 1 +@@ -127,10 +147,106 @@ + #define SR2_ERRMAXLIMIT (0x02 << 8) + #define SR2_ERRMINLIMIT (0xF9 << 0) + ++/* T2 SMART REFLEX */ ++#define R_SRI2C_SLAVE_ADDR 0x12 ++#define R_VDD1_SR_CONTROL 0x00 ++#define R_VDD2_SR_CONTROL 0x01 ++#define T2_SMPS_UPDATE_DELAY 360 /* In uSec */ ++ ++/* Vmode control */ ++#define R_DCDC_GLOBAL_CFG PHY_TO_OFF_PM_RECIEVER(0x61) ++ ++#define R_VDD1_VSEL PHY_TO_OFF_PM_RECIEVER(0xb9) ++#define R_VDD1_VMODE_CFG PHY_TO_OFF_PM_RECIEVER(0xba) ++#define R_VDD1_VFLOOR PHY_TO_OFF_PM_RECIEVER(0xbb) ++#define R_VDD1_VROOF PHY_TO_OFF_PM_RECIEVER(0xbc) ++#define R_VDD1_STEP PHY_TO_OFF_PM_RECIEVER(0xbd) ++ ++#define R_VDD2_VSEL PHY_TO_OFF_PM_RECIEVER(0xc7) ++#define R_VDD2_VMODE_CFG PHY_TO_OFF_PM_RECIEVER(0xc8) ++#define R_VDD2_VFLOOR PHY_TO_OFF_PM_RECIEVER(0xc9) ++#define R_VDD2_VROOF PHY_TO_OFF_PM_RECIEVER(0xca) ++#define R_VDD2_STEP PHY_TO_OFF_PM_RECIEVER(0xcb) ++ ++/* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE valuws */ ++#define DCDC_GLOBAL_CFG_ENABLE_SRFLX 0x08 ++ ++/* VDDs*/ ++#define PRCM_VDD1 1 ++#define PRCM_VDD2 2 ++#define PRCM_MAX_SYSC_REGS 30 ++ ++/* XXX: These should be removed/moved from here once we have a working DVFS ++ implementation in place */ ++#define AT_3430 1 /*3430 ES 1.0 */ ++#define AT_3430_ES2 2 /*3430 ES 2.0 */ ++ ++#define ID_OPP 0xE2 /*OPP*/ ++ ++/* DEVICE ID/DPLL ID/CLOCK ID: bits 28-31 for OMAP type */ ++#define OMAP_TYPE_SHIFT 28 ++#define OMAP_TYPE_MASK 0xF ++/* OPP ID: bits: 0-4 for OPP number */ ++#define OPP_NO_POS 0 ++#define OPP_NO_MASK 0x1F ++/* OPP ID: bits: 5-6 for VDD */ ++#define VDD_NO_POS 5 ++#define VDD_NO_MASK 0x3 ++/* Other IDs: bits 20-27 for ID type */ ++/* These IDs have bits 25,26,27 as 1 */ ++#define OTHER_ID_TYPE_SHIFT 20 ++#define OTHER_ID_TYPE_MASK 0xFF ++ ++#define OTHER_ID_TYPE(X) ((X & OTHER_ID_TYPE_MASK) << OTHER_ID_TYPE_SHIFT) ++#define ID_OPP_NO(X) ((X & OPP_NO_MASK) << OPP_NO_POS) ++#define ID_VDD(X) ((X & VDD_NO_MASK) << VDD_NO_POS) ++#define OMAP(X) ((X >> OMAP_TYPE_SHIFT) & OMAP_TYPE_MASK) ++#define get_opp_no(X) ((X >> OPP_NO_POS) & OPP_NO_MASK) ++#define get_vdd(X) ((X >> VDD_NO_POS) & VDD_NO_MASK) ++ ++/* VDD1 OPPs */ ++#define PRCM_VDD1_OPP1 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x1)) ++#define PRCM_VDD1_OPP2 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x2)) ++#define PRCM_VDD1_OPP3 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x3)) ++#define PRCM_VDD1_OPP4 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x4)) ++#define PRCM_VDD1_OPP5 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x5)) ++#define PRCM_NO_VDD1_OPPS 5 ++ ++ ++/* VDD2 OPPs */ ++#define PRCM_VDD2_OPP1 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x1)) ++#define PRCM_VDD2_OPP2 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x2)) ++#define PRCM_VDD2_OPP3 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ ++ ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x3)) ++#define PRCM_NO_VDD2_OPPS 3 ++/* XXX: end remove/move */ ++ ++ ++/* XXX: find more appropriate place for these once DVFS is in place */ + extern u32 current_vdd1_opp; + extern u32 current_vdd2_opp; +-extern struct kset power_subsys; + +-extern inline int loop_wait(u32 *lcnt, u32 *rcnt, u32 delay); +-extern void omap_udelay(u32 udelay); ++/* ++ * Smartreflex module enable/disable interface. ++ * NOTE: if smartreflex is not enabled from sysfs, these functions will not ++ * do anything. ++ */ ++#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE) ++void enable_smartreflex(int srid); ++void disable_smartreflex(int srid); ++#else ++static inline void enable_smartreflex(int srid) {} ++static inline void disable_smartreflex(int srid) {} ++#endif ++ ++ ++#endif ++ + +diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h +index 12bc22a..6e64fe7 100644 +--- a/include/asm-arm/arch-omap/control.h ++++ b/include/asm-arm/arch-omap/control.h +@@ -138,6 +138,15 @@ + #define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) + #define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) + #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) ++#define OMAP343X_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110) ++#define OMAP343X_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114) ++#define OMAP343X_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118) ++#define OMAP343X_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x011c) ++#define OMAP343X_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120) ++#define OMAP343X_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0124) ++#define OMAP343X_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128) ++#define OMAP343X_CONTROL_FUSE_OPP3_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c) ++#define OMAP343X_CONTROL_FUSE_SR (OMAP2_CONTROL_GENERAL + 0x0130) + #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) + #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) + #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) +@@ -172,6 +181,16 @@ + #define OMAP2_SYSBOOT_1_MASK (1 << 1) + #define OMAP2_SYSBOOT_0_MASK (1 << 0) + ++/* CONTROL_FUSE_SR bits */ ++#define OMAP343X_SR2_SENNENABLE_MASK (0x3 << 10) ++#define OMAP343X_SR2_SENNENABLE_SHIFT 10 ++#define OMAP343X_SR2_SENPENABLE_MASK (0x3 << 8) ++#define OMAP343X_SR2_SENPENABLE_SHIFT 8 ++#define OMAP343X_SR1_SENNENABLE_MASK (0x3 << 2) ++#define OMAP343X_SR1_SENNENABLE_SHIFT 2 ++#define OMAP343X_SR1_SENPENABLE_MASK (0x3 << 0) ++#define OMAP343X_SR1_SENPENABLE_SHIFT 0 ++ + #ifndef __ASSEMBLY__ + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + extern void __iomem *omap_ctrl_base_get(void); +diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h +index 6a0459a..3667fd6 100644 +--- a/include/asm-arm/arch-omap/omap34xx.h ++++ b/include/asm-arm/arch-omap/omap34xx.h +@@ -54,6 +54,8 @@ + #define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) + #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) + #define IRQ_SIR_IRQ 0x0040 ++#define OMAP34XX_SR1_BASE 0x480C9000 ++#define OMAP34XX_SR2_BASE 0x480CB000 + + + #if defined(CONFIG_ARCH_OMAP3430) +-- +1.5.4.3 diff --git a/packages/linux/linux-omap2-git/omap3evm/0002-omap3-cpuidle.patch b/packages/linux/linux-omap2-git/omap3evm/0002-omap3-cpuidle.patch new file mode 100644 index 0000000000..c17c690fe1 --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0002-omap3-cpuidle.patch @@ -0,0 +1,88 @@ +From: "Rajendra Nayak" <rnayak@ti.com>
+To: <linux-omap@vger.kernel.org>
+Subject: [PATCH 02/02] Kconfig changes
+Date: Tue, 10 Jun 2008 12:39:02 +0530
+
+Updates the CPUidle Kconfig
+
+Signed-off-by: Rajendra Nayak <rnayak@ti.com>
+
+---
+ arch/arm/Kconfig | 10 ++++++++++
+ drivers/cpuidle/Kconfig | 28 ++++++++++++++++++++++------
+ 2 files changed, 32 insertions(+), 6 deletions(-)
+
+Index: linux-omap-2.6/arch/arm/Kconfig
+===================================================================
+--- linux-omap-2.6.orig/arch/arm/Kconfig 2008-06-10 11:43:10.790502713 +0530
++++ linux-omap-2.6/arch/arm/Kconfig 2008-06-10 11:43:38.701604549 +0530
+@@ -954,6 +954,16 @@ config ATAGS_PROC
+
+ endmenu
+
++if (ARCH_OMAP)
++
++menu "CPUIdle"
++
++source "drivers/cpuidle/Kconfig"
++
++endmenu
++
++endif
++
+ if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+
+ menu "CPU Frequency scaling"
+Index: linux-omap-2.6/drivers/cpuidle/Kconfig
+===================================================================
+--- linux-omap-2.6.orig/drivers/cpuidle/Kconfig 2008-06-10 11:43:10.790502713 +0530
++++ linux-omap-2.6/drivers/cpuidle/Kconfig 2008-06-10 12:06:36.139332151 +0530
+@@ -1,20 +1,36 @@
++menu "CPU idle PM support"
+
+ config CPU_IDLE
+ bool "CPU idle PM support"
+- default ACPI
++ default n
+ help
+ CPU idle is a generic framework for supporting software-controlled
+ idle processor power management. It includes modular cross-platform
+ governors that can be swapped during runtime.
+
+- If you're using an ACPI-enabled platform, you should say Y here.
++ If you're using a mobile platform that supports CPU idle PM (e.g.
++ an ACPI-capable notebook), you should say Y here.
++
++if CPU_IDLE
++
++comment "Governors"
+
+ config CPU_IDLE_GOV_LADDER
+- bool
++ bool "ladder"
+ depends on CPU_IDLE
+- default y
++ default n
+
+ config CPU_IDLE_GOV_MENU
+- bool
++ bool "menu"
+ depends on CPU_IDLE && NO_HZ
+- default y
++ default n
++ help
++ This cpuidle governor evaluates all available states and chooses the
++ deepest state that meets all of the following constraints: BM activity,
++ expected time until next timer interrupt, and last break event time
++ delta. It is designed to minimize power consumption. Currently
++ dynticks is required.
++
++endif # CPU_IDLE
++
++endmenu
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
diff --git a/packages/linux/linux-omap2-git/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch b/packages/linux/linux-omap2-git/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch new file mode 100644 index 0000000000..40d5790367 --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch @@ -0,0 +1,1001 @@ +From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +To: linux-omap@vger.kernel.org +Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +Subject: [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap +Date: Fri, 6 Jun 2008 12:49:49 +0300 +Message-Id: <1212745789-13926-3-git-send-email-ext-kalle.jokiniemi@nokia.com> + +- Changed register accesses to use prm_{read,write}_mod_reg and + prm_{set,clear,rmw}_mod_reg_bits() functions instread of + "REG_X = REG_Y" type accesses. + +- Changed direct register clock enables/disables to clockframework calls. + +- replaced cpu-related #ifdefs with if (cpu_is_xxxx()) calls. + +- Added E-fuse support: Use silicon characteristics parameters from E-fuse + +- added smartreflex_disable/enable calls to pm34xx.c suspend function. + +- Added "SmartReflex support" entry into Kconfig under "System type->TI OMAP + Implementations". It depends on ARCH_OMAP34XX and TWL4030_CORE. + +- Added "SmartReflex testing support" Kconfig option for using hard coded + software parameters instead of E-fuse parameters. + +Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> +--- + arch/arm/mach-omap2/Makefile | 3 + + arch/arm/mach-omap2/pm34xx.c | 9 + + arch/arm/mach-omap2/smartreflex.c | 531 +++++++++++++++++++++++-------------- + arch/arm/mach-omap2/smartreflex.h | 9 +- + arch/arm/plat-omap/Kconfig | 31 +++ + 5 files changed, 385 insertions(+), 198 deletions(-) + +diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile +index 50c6657..f645b6e 100644 +--- a/arch/arm/mach-omap2/Makefile ++++ b/arch/arm/mach-omap2/Makefile +@@ -25,6 +25,9 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o + obj-$(CONFIG_PM_DEBUG) += pm-debug.o + endif + ++# SmartReflex driver ++obj-$(CONFIG_OMAP_SMARTREFLEX) += smartreflex.o ++ + # Clock framework + obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o + obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c +index 7e775cc..3da4f47 100644 +--- a/arch/arm/mach-omap2/pm34xx.c ++++ b/arch/arm/mach-omap2/pm34xx.c +@@ -36,6 +36,7 @@ + + #include "prm.h" + #include "pm.h" ++#include "smartreflex.h" + + struct power_state { + struct powerdomain *pwrdm; +@@ -256,6 +257,10 @@ static int omap3_pm_suspend(void) + struct power_state *pwrst; + int state, ret = 0; + ++ /* XXX Disable smartreflex before entering suspend */ ++ disable_smartreflex(SR1); ++ disable_smartreflex(SR2); ++ + /* Read current next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); +@@ -287,6 +292,10 @@ restore: + printk(KERN_INFO "Successfully put all powerdomains " + "to target state\n"); + ++ /* XXX Enable smartreflex after suspend */ ++ enable_smartreflex(SR1); ++ enable_smartreflex(SR2); ++ + return ret; + } + +diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c +index dae7460..0b10a5d 100644 +--- a/arch/arm/mach-omap2/smartreflex.c ++++ b/arch/arm/mach-omap2/smartreflex.c +@@ -3,6 +3,9 @@ + * + * OMAP34XX SmartReflex Voltage Control + * ++ * Copyright (C) 2008 Nokia Corporation ++ * Kalle Jokiniemi ++ * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M <x0080970@ti.com> + * +@@ -20,13 +23,16 @@ + #include <linux/err.h> + #include <linux/clk.h> + #include <linux/sysfs.h> +- +-#include <asm/arch/prcm.h> +-#include <asm/arch/power_companion.h> ++#include <linux/kobject.h> ++#include <linux/i2c/twl4030.h> + #include <linux/io.h> + +-#include "prcm-regs.h" ++#include <asm/arch/omap34xx.h> ++#include <asm/arch/control.h> ++ ++#include "prm.h" + #include "smartreflex.h" ++#include "prm-regbits-34xx.h" + + + /* #define DEBUG_SR 1 */ +@@ -37,11 +43,16 @@ + # define DPRINTK(fmt, args...) + #endif + ++/* XXX: These should be relocated where-ever the OPP implementation will be */ ++u32 current_vdd1_opp; ++u32 current_vdd2_opp; ++ + struct omap_sr{ + int srid; + int is_sr_reset; + int is_autocomp_active; + struct clk *fck; ++ u32 clk_length; + u32 req_opp_no; + u32 opp1_nvalue, opp2_nvalue, opp3_nvalue, opp4_nvalue, opp5_nvalue; + u32 senp_mod, senn_mod; +@@ -53,6 +64,7 @@ static struct omap_sr sr1 = { + .srid = SR1, + .is_sr_reset = 1, + .is_autocomp_active = 0, ++ .clk_length = 0, + .srbase_addr = OMAP34XX_SR1_BASE, + }; + +@@ -60,6 +72,7 @@ static struct omap_sr sr2 = { + .srid = SR2, + .is_sr_reset = 1, + .is_autocomp_active = 0, ++ .clk_length = 0, + .srbase_addr = OMAP34XX_SR2_BASE, + }; + +@@ -85,8 +98,6 @@ static inline u32 sr_read_reg(struct omap_sr *sr, int offset) + return omap_readl(sr->srbase_addr + offset); + } + +- +-#ifndef USE_EFUSE_VALUES + static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen) + { + u32 gn, rn, mul; +@@ -100,7 +111,21 @@ static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen) + } + } + } +-#endif ++ ++static void sr_clk_get(struct omap_sr *sr) ++{ ++ if (sr->srid == SR1) { ++ sr->fck = clk_get(NULL, "sr1_fck"); ++ if (IS_ERR(sr->fck)) ++ printk(KERN_ERR "Could not get sr1_fck\n"); ++ ++ } else if (sr->srid == SR2) { ++ sr->fck = clk_get(NULL, "sr2_fck"); ++ if (IS_ERR(sr->fck)) ++ printk(KERN_ERR "Could not get sr2_fck\n"); ++ ++ } ++} + + static int sr_clk_enable(struct omap_sr *sr) + { +@@ -131,22 +156,86 @@ static int sr_clk_disable(struct omap_sr *sr) + return 0; + } + +-static void sr_set_nvalues(struct omap_sr *sr) ++static void sr_set_clk_length(struct omap_sr *sr) ++{ ++ struct clk *osc_sys_ck; ++ u32 sys_clk = 0; ++ ++ osc_sys_ck = clk_get(NULL, "osc_sys_ck"); ++ sys_clk = clk_get_rate(osc_sys_ck); ++ clk_put(osc_sys_ck); ++ ++ switch (sys_clk) { ++ case 12000000: ++ sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK; ++ break; ++ case 13000000: ++ sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK; ++ break; ++ case 19200000: ++ sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK; ++ break; ++ case 26000000: ++ sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK; ++ break; ++ case 38400000: ++ sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK; ++ break; ++ default : ++ printk(KERN_ERR "Invalid sysclk value: %d\n", sys_clk); ++ break; ++ } ++} ++ ++static void sr_set_efuse_nvalues(struct omap_sr *sr) ++{ ++ if (sr->srid == SR1) { ++ sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) & ++ OMAP343X_SR1_SENNENABLE_MASK) >> ++ OMAP343X_SR1_SENNENABLE_SHIFT; ++ ++ sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) & ++ OMAP343X_SR1_SENPENABLE_MASK) >> ++ OMAP343X_SR1_SENPENABLE_SHIFT; ++ ++ sr->opp5_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP5_VDD1); ++ sr->opp4_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP4_VDD1); ++ sr->opp3_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP3_VDD1); ++ sr->opp2_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP2_VDD1); ++ sr->opp1_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP1_VDD1); ++ } else if (sr->srid == SR2) { ++ sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) & ++ OMAP343X_SR2_SENNENABLE_MASK) >> ++ OMAP343X_SR2_SENNENABLE_SHIFT; ++ ++ sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) & ++ OMAP343X_SR2_SENPENABLE_MASK) >> ++ OMAP343X_SR2_SENPENABLE_SHIFT; ++ ++ sr->opp3_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP3_VDD2); ++ sr->opp2_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP2_VDD2); ++ sr->opp1_nvalue = omap_ctrl_readl( ++ OMAP343X_CONTROL_FUSE_OPP1_VDD2); ++ } ++} ++ ++/* Hard coded nvalues for testing purposes, may cause device to hang! */ ++static void sr_set_testing_nvalues(struct omap_sr *sr) + { +-#ifdef USE_EFUSE_VALUES +- u32 n1, n2; +-#else + u32 senpval, sennval; + u32 senpgain, senngain; + u32 rnsenp, rnsenn; +-#endif + + if (sr->srid == SR1) { +-#ifdef USE_EFUSE_VALUES +- /* Read values for VDD1 from EFUSE */ +-#else +- /* since E-Fuse Values are not available, calculating the +- * reciprocal of the SenN and SenP values for SR1 ++ /* Calculating the reciprocal of the SenN and SenP values ++ * for SR1 + */ + sr->senp_mod = 0x03; /* SenN-M5 enabled */ + sr->senn_mod = 0x03; +@@ -216,15 +305,16 @@ static void sr_set_nvalues(struct omap_sr *sr) + (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | + (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); + ++ /* XXX The clocks are enabled in the startup and NVALUE is ++ * set also there. Disabling this for now, but this could ++ * be related to dynamic sleep during boot */ ++#if 0 + sr_clk_enable(sr); + sr_write_reg(sr, NVALUERECIPROCAL, sr->opp3_nvalue); + sr_clk_disable(sr); +- + #endif ++ + } else if (sr->srid == SR2) { +-#ifdef USE_EFUSE_VALUES +- /* Read values for VDD2 from EFUSE */ +-#else + /* since E-Fuse Values are not available, calculating the + * reciprocal of the SenN and SenP values for SR2 + */ +@@ -269,134 +359,163 @@ static void sr_set_nvalues(struct omap_sr *sr) + (senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) | + (rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) | + (rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT)); +- +-#endif + } + + } + ++static void sr_set_nvalues(struct omap_sr *sr) ++{ ++ if (SR_TESTING_NVALUES) ++ sr_set_testing_nvalues(sr); ++ else ++ sr_set_efuse_nvalues(sr); ++} ++ + static void sr_configure_vp(int srid) + { + u32 vpconfig; + + if (srid == SR1) { + vpconfig = PRM_VP1_CONFIG_ERROROFFSET | PRM_VP1_CONFIG_ERRORGAIN +- | PRM_VP1_CONFIG_INITVOLTAGE | PRM_VP1_CONFIG_TIMEOUTEN; +- +- PRM_VP1_CONFIG = vpconfig; +- PRM_VP1_VSTEPMIN = PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN | +- PRM_VP1_VSTEPMIN_VSTEPMIN; +- +- PRM_VP1_VSTEPMAX = PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX | +- PRM_VP1_VSTEPMAX_VSTEPMAX; +- +- PRM_VP1_VLIMITTO = PRM_VP1_VLIMITTO_VDDMAX | +- PRM_VP1_VLIMITTO_VDDMIN | PRM_VP1_VLIMITTO_TIMEOUT; +- +- PRM_VP1_CONFIG |= PRM_VP1_CONFIG_INITVDD; +- PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_INITVDD; ++ | PRM_VP1_CONFIG_INITVOLTAGE ++ | PRM_VP1_CONFIG_TIMEOUTEN; ++ ++ prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_CONFIG_OFFSET); ++ prm_write_mod_reg(PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN | ++ PRM_VP1_VSTEPMIN_VSTEPMIN, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_VSTEPMIN_OFFSET); ++ ++ prm_write_mod_reg(PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX | ++ PRM_VP1_VSTEPMAX_VSTEPMAX, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_VSTEPMAX_OFFSET); ++ ++ prm_write_mod_reg(PRM_VP1_VLIMITTO_VDDMAX | ++ PRM_VP1_VLIMITTO_VDDMIN | ++ PRM_VP1_VLIMITTO_TIMEOUT, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_VLIMITTO_OFFSET); ++ ++ /* Trigger initVDD value copy to voltage processor */ ++ prm_set_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_CONFIG_OFFSET); ++ /* Clear initVDD copy trigger bit */ ++ prm_clear_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_CONFIG_OFFSET); + + } else if (srid == SR2) { + vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN +- | PRM_VP2_CONFIG_INITVOLTAGE | PRM_VP2_CONFIG_TIMEOUTEN; +- +- PRM_VP2_CONFIG = vpconfig; +- PRM_VP2_VSTEPMIN = PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN | +- PRM_VP2_VSTEPMIN_VSTEPMIN; +- +- PRM_VP2_VSTEPMAX = PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX | +- PRM_VP2_VSTEPMAX_VSTEPMAX; +- +- PRM_VP2_VLIMITTO = PRM_VP2_VLIMITTO_VDDMAX | +- PRM_VP2_VLIMITTO_VDDMIN | PRM_VP2_VLIMITTO_TIMEOUT; +- +- PRM_VP2_CONFIG |= PRM_VP2_CONFIG_INITVDD; +- PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_INITVDD; ++ | PRM_VP2_CONFIG_INITVOLTAGE ++ | PRM_VP2_CONFIG_TIMEOUTEN; ++ ++ prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_CONFIG_OFFSET); ++ prm_write_mod_reg(PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN | ++ PRM_VP2_VSTEPMIN_VSTEPMIN, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_VSTEPMIN_OFFSET); ++ ++ prm_write_mod_reg(PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX | ++ PRM_VP2_VSTEPMAX_VSTEPMAX, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_VSTEPMAX_OFFSET); ++ ++ prm_write_mod_reg(PRM_VP2_VLIMITTO_VDDMAX | ++ PRM_VP2_VLIMITTO_VDDMIN | ++ PRM_VP2_VLIMITTO_TIMEOUT, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_VLIMITTO_OFFSET); ++ ++ /* Trigger initVDD value copy to voltage processor */ ++ prm_set_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_CONFIG_OFFSET); ++ /* Reset initVDD copy trigger bit */ ++ prm_clear_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_CONFIG_OFFSET); + + } + } + + static void sr_configure_vc(void) + { +- PRM_VC_SMPS_SA = +- (R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA1_SHIFT) | +- (R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA0_SHIFT); +- +- PRM_VC_SMPS_VOL_RA = (R_VDD2_SR_CONTROL << PRM_VC_SMPS_VOLRA1_SHIFT) | +- (R_VDD1_SR_CONTROL << PRM_VC_SMPS_VOLRA0_SHIFT); +- +- PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL0_ON << PRM_VC_CMD_ON_SHIFT) | +- (PRM_VC_CMD_VAL0_ONLP << PRM_VC_CMD_ONLP_SHIFT) | +- (PRM_VC_CMD_VAL0_RET << PRM_VC_CMD_RET_SHIFT) | +- (PRM_VC_CMD_VAL0_OFF << PRM_VC_CMD_OFF_SHIFT); +- +- PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL1_ON << PRM_VC_CMD_ON_SHIFT) | +- (PRM_VC_CMD_VAL1_ONLP << PRM_VC_CMD_ONLP_SHIFT) | +- (PRM_VC_CMD_VAL1_RET << PRM_VC_CMD_RET_SHIFT) | +- (PRM_VC_CMD_VAL1_OFF << PRM_VC_CMD_OFF_SHIFT); +- +- PRM_VC_CH_CONF = PRM_VC_CH_CONF_CMD1 | PRM_VC_CH_CONF_RAV1; +- +- PRM_VC_I2C_CFG = PRM_VC_I2C_CFG_MCODE | PRM_VC_I2C_CFG_HSEN +- | PRM_VC_I2C_CFG_SREN; ++ prm_write_mod_reg((R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA1_SHIFT) | ++ (R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA0_SHIFT), ++ OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_SA_OFFSET); ++ ++ prm_write_mod_reg((R_VDD2_SR_CONTROL << OMAP3430_VOLRA1_SHIFT) | ++ (R_VDD1_SR_CONTROL << OMAP3430_VOLRA0_SHIFT), ++ OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET); ++ ++ prm_write_mod_reg((OMAP3430_VC_CMD_VAL0_ON << ++ OMAP3430_VC_CMD_ON_SHIFT) | ++ (OMAP3430_VC_CMD_VAL0_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) | ++ (OMAP3430_VC_CMD_VAL0_RET << OMAP3430_VC_CMD_RET_SHIFT) | ++ (OMAP3430_VC_CMD_VAL0_OFF << OMAP3430_VC_CMD_OFF_SHIFT), ++ OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_0_OFFSET); ++ ++ prm_write_mod_reg((OMAP3430_VC_CMD_VAL1_ON << ++ OMAP3430_VC_CMD_ON_SHIFT) | ++ (OMAP3430_VC_CMD_VAL1_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) | ++ (OMAP3430_VC_CMD_VAL1_RET << OMAP3430_VC_CMD_RET_SHIFT) | ++ (OMAP3430_VC_CMD_VAL1_OFF << OMAP3430_VC_CMD_OFF_SHIFT), ++ OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_1_OFFSET); ++ ++ prm_write_mod_reg(OMAP3430_CMD1 | OMAP3430_RAV1, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_CH_CONF_OFFSET); ++ ++ prm_write_mod_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN | OMAP3430_SREN, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_I2C_CFG_OFFSET); + + /* Setup voltctrl and other setup times */ ++ /* XXX CONFIG_SYSOFFMODE has not been implemented yet */ + #ifdef CONFIG_SYSOFFMODE +- PRM_VOLTCTRL = PRM_VOLTCTRL_AUTO_OFF | PRM_VOLTCTRL_AUTO_RET; +- PRM_CLKSETUP = PRM_CLKSETUP_DURATION; +- PRM_VOLTSETUP1 = (PRM_VOLTSETUP_TIME2 << PRM_VOLTSETUP_TIME2_OFFSET) | +- (PRM_VOLTSETUP_TIME1 << PRM_VOLTSETUP_TIME1_OFFSET); +- PRM_VOLTOFFSET = PRM_VOLTOFFSET_DURATION; +- PRM_VOLTSETUP2 = PRM_VOLTSETUP2_DURATION; ++ prm_write_mod_reg(OMAP3430_AUTO_OFF | OMAP3430_AUTO_RET, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VOLTCTRL_OFFSET); ++ ++ prm_write_mod_reg(OMAP3430_CLKSETUP_DURATION, OMAP3430_GR_MOD, ++ OMAP3_PRM_CLKSETUP_OFFSET); ++ prm_write_mod_reg((OMAP3430_VOLTSETUP_TIME2 << ++ OMAP3430_VOLTSETUP_TIME2_OFFSET) | ++ (OMAP3430_VOLTSETUP_TIME1 << ++ OMAP3430_VOLTSETUP_TIME1_OFFSET), ++ OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET); ++ ++ prm_write_mod_reg(OMAP3430_VOLTOFFSET_DURATION, OMAP3430_GR_MOD, ++ OMAP3_PRM_VOLTOFFSET_OFFSET); ++ prm_write_mod_reg(OMAP3430_VOLTSETUP2_DURATION, OMAP3430_GR_MOD, ++ OMAP3_PRM_VOLTSETUP2_OFFSET); + #else +- PRM_VOLTCTRL |= PRM_VOLTCTRL_AUTO_RET; ++ prm_set_mod_reg_bits(OMAP3430_AUTO_RET, OMAP3430_GR_MOD, ++ OMAP3_PRM_VOLTCTRL_OFFSET); + #endif + + } + +- + static void sr_configure(struct omap_sr *sr) + { +- u32 sys_clk, sr_clk_length = 0; + u32 sr_config; + u32 senp_en , senn_en; + ++ if (sr->clk_length == 0) ++ sr_set_clk_length(sr); ++ + senp_en = sr->senp_mod; + senn_en = sr->senn_mod; +- +- sys_clk = prcm_get_system_clock_speed(); +- +- switch (sys_clk) { +- case 12000: +- sr_clk_length = SRCLKLENGTH_12MHZ_SYSCLK; +- break; +- case 13000: +- sr_clk_length = SRCLKLENGTH_13MHZ_SYSCLK; +- break; +- case 19200: +- sr_clk_length = SRCLKLENGTH_19MHZ_SYSCLK; +- break; +- case 26000: +- sr_clk_length = SRCLKLENGTH_26MHZ_SYSCLK; +- break; +- case 38400: +- sr_clk_length = SRCLKLENGTH_38MHZ_SYSCLK; +- break; +- default : +- printk(KERN_ERR "Invalid sysclk value\n"); +- break; +- } +- +- DPRINTK(KERN_DEBUG "SR : sys clk %lu\n", sys_clk); + if (sr->srid == SR1) { + sr_config = SR1_SRCONFIG_ACCUMDATA | +- (sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | ++ (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | + SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN | + SRCONFIG_MINMAXAVG_EN | + (senn_en << SRCONFIG_SENNENABLE_SHIFT) | + (senp_en << SRCONFIG_SENPENABLE_SHIFT) | + SRCONFIG_DELAYCTRL; +- ++ DPRINTK(KERN_DEBUG "setting SRCONFIG1 to 0x%08lx\n", ++ (unsigned long int) sr_config); + sr_write_reg(sr, SRCONFIG, sr_config); + + sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT | +@@ -408,18 +527,18 @@ static void sr_configure(struct omap_sr *sr) + + } else if (sr->srid == SR2) { + sr_config = SR2_SRCONFIG_ACCUMDATA | +- (sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | ++ (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | + SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN | + SRCONFIG_MINMAXAVG_EN | + (senn_en << SRCONFIG_SENNENABLE_SHIFT) | + (senp_en << SRCONFIG_SENPENABLE_SHIFT) | + SRCONFIG_DELAYCTRL; + ++ DPRINTK(KERN_DEBUG "setting SRCONFIG2 to 0x%08lx\n", ++ (unsigned long int) sr_config); + sr_write_reg(sr, SRCONFIG, sr_config); +- + sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT | + SR2_AVGWEIGHT_SENNAVGWEIGHT); +- + sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK | + SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), + (SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT)); +@@ -428,9 +547,9 @@ static void sr_configure(struct omap_sr *sr) + sr->is_sr_reset = 0; + } + +-static void sr_enable(struct omap_sr *sr, u32 target_opp_no) ++static int sr_enable(struct omap_sr *sr, u32 target_opp_no) + { +- u32 nvalue_reciprocal, current_nvalue; ++ u32 nvalue_reciprocal; + + sr->req_opp_no = target_opp_no; + +@@ -472,11 +591,10 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no) + } + } + +- current_nvalue = sr_read_reg(sr, NVALUERECIPROCAL); +- +- if (current_nvalue == nvalue_reciprocal) { +- DPRINTK("System is already at the desired voltage level\n"); +- return; ++ if (nvalue_reciprocal == 0) { ++ printk(KERN_NOTICE "OPP%d doesn't support SmartReflex\n", ++ target_opp_no); ++ return SR_FALSE; + } + + sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal); +@@ -485,18 +603,19 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no) + sr_modify_reg(sr, ERRCONFIG, + (ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST), + (ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST)); +- + if (sr->srid == SR1) { + /* Enable VP1 */ +- PRM_VP1_CONFIG |= PRM_VP1_CONFIG_VPENABLE; ++ prm_set_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_CONFIG_OFFSET); + } else if (sr->srid == SR2) { + /* Enable VP2 */ +- PRM_VP2_CONFIG |= PRM_VP2_CONFIG_VPENABLE; ++ prm_set_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_CONFIG_OFFSET); + } + + /* SRCONFIG - enable SR */ + sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE); +- ++ return SR_TRUE; + } + + static void sr_disable(struct omap_sr *sr) +@@ -507,11 +626,13 @@ static void sr_disable(struct omap_sr *sr) + sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ~SRCONFIG_SRENABLE); + + if (sr->srid == SR1) { +- /* Enable VP1 */ +- PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE; ++ /* Disable VP1 */ ++ prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_CONFIG_OFFSET); + } else if (sr->srid == SR2) { +- /* Enable VP2 */ +- PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE; ++ /* Disable VP2 */ ++ prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_CONFIG_OFFSET); + } + } + +@@ -535,7 +656,12 @@ void sr_start_vddautocomap(int srid, u32 target_opp_no) + srid); + + sr->is_autocomp_active = 1; +- sr_enable(sr, target_opp_no); ++ if (!sr_enable(sr, target_opp_no)) { ++ printk(KERN_WARNING "SR%d: VDD autocomp not activated\n", srid); ++ sr->is_autocomp_active = 0; ++ if (sr->is_sr_reset == 1) ++ sr_clk_disable(sr); ++ } + } + EXPORT_SYMBOL(sr_start_vddautocomap); + +@@ -574,20 +700,18 @@ void enable_smartreflex(int srid) + + if (sr->is_autocomp_active == 1) { + if (sr->is_sr_reset == 1) { +- if (srid == SR1) { +- /* Enable SR clks */ +- CM_FCLKEN_WKUP |= SR1_CLK_ENABLE; +- target_opp_no = get_opp_no(current_vdd1_opp); ++ /* Enable SR clks */ ++ sr_clk_enable(sr); + +- } else if (srid == SR2) { +- /* Enable SR clks */ +- CM_FCLKEN_WKUP |= SR2_CLK_ENABLE; ++ if (srid == SR1) ++ target_opp_no = get_opp_no(current_vdd1_opp); ++ else if (srid == SR2) + target_opp_no = get_opp_no(current_vdd2_opp); +- } + + sr_configure(sr); + +- sr_enable(sr, target_opp_no); ++ if (!sr_enable(sr, target_opp_no)) ++ sr_clk_disable(sr); + } + } + } +@@ -602,15 +726,6 @@ void disable_smartreflex(int srid) + sr = &sr2; + + if (sr->is_autocomp_active == 1) { +- if (srid == SR1) { +- /* Enable SR clk */ +- CM_FCLKEN_WKUP |= SR1_CLK_ENABLE; +- +- } else if (srid == SR2) { +- /* Enable SR clk */ +- CM_FCLKEN_WKUP |= SR2_CLK_ENABLE; +- } +- + if (sr->is_sr_reset == 0) { + + sr->is_sr_reset = 1; +@@ -618,17 +733,18 @@ void disable_smartreflex(int srid) + sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, + ~SRCONFIG_SRENABLE); + ++ /* Disable SR clk */ ++ sr_clk_disable(sr); + if (sr->srid == SR1) { +- /* Disable SR clk */ +- CM_FCLKEN_WKUP &= ~SR1_CLK_ENABLE; +- /* Enable VP1 */ +- PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE; +- ++ /* Disable VP1 */ ++ prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP1_CONFIG_OFFSET); + } else if (sr->srid == SR2) { +- /* Disable SR clk */ +- CM_FCLKEN_WKUP &= ~SR2_CLK_ENABLE; +- /* Enable VP2 */ +- PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE; ++ /* Disable VP2 */ ++ prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VP2_CONFIG_OFFSET); + } + } + } +@@ -638,7 +754,6 @@ void disable_smartreflex(int srid) + /* Voltage Scaling using SR VCBYPASS */ + int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel) + { +- int ret; + int sr_status = 0; + u32 vdd, target_opp_no; + u32 vc_bypass_value; +@@ -651,39 +766,53 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel) + if (vdd == PRCM_VDD1) { + sr_status = sr_stop_vddautocomap(SR1); + +- PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL_0 & ~PRM_VC_CMD_ON_MASK) | +- (vsel << PRM_VC_CMD_ON_SHIFT); ++ prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK, ++ (vsel << OMAP3430_VC_CMD_ON_SHIFT), ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_CMD_VAL_0_OFFSET); + reg_addr = R_VDD1_SR_CONTROL; + + } else if (vdd == PRCM_VDD2) { + sr_status = sr_stop_vddautocomap(SR2); + +- PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL_1 & ~PRM_VC_CMD_ON_MASK) | +- (vsel << PRM_VC_CMD_ON_SHIFT); ++ prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK, ++ (vsel << OMAP3430_VC_CMD_ON_SHIFT), ++ OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_CMD_VAL_1_OFFSET); + reg_addr = R_VDD2_SR_CONTROL; + } + +- vc_bypass_value = (vsel << PRM_VC_BYPASS_DATA_SHIFT) | +- (reg_addr << PRM_VC_BYPASS_REGADDR_SHIFT) | +- (R_SRI2C_SLAVE_ADDR << PRM_VC_BYPASS_SLAVEADDR_SHIFT); ++ vc_bypass_value = (vsel << OMAP3430_DATA_SHIFT) | ++ (reg_addr << OMAP3430_REGADDR_SHIFT) | ++ (R_SRI2C_SLAVE_ADDR << OMAP3430_SLAVEADDR_SHIFT); + +- PRM_VC_BYPASS_VAL = vc_bypass_value; ++ prm_write_mod_reg(vc_bypass_value, OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_BYPASS_VAL_OFFSET); + +- PRM_VC_BYPASS_VAL |= PRM_VC_BYPASS_VALID; ++ vc_bypass_value = prm_set_mod_reg_bits(OMAP3430_VALID, OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_BYPASS_VAL_OFFSET); + +- DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, PRM_VC_BYPASS_VAL); +- DPRINTK("PRM_IRQST_MPU %X\n", PRM_IRQSTATUS_MPU); ++ DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, vc_bypass_value); ++ DPRINTK("PRM_IRQST_MPU %X\n", prm_read_mod_reg(OCP_MOD, ++ OMAP3_PRM_IRQSTATUS_MPU_OFFSET)); + +- while ((PRM_VC_BYPASS_VAL & PRM_VC_BYPASS_VALID) != 0x0) { +- ret = loop_wait(&loop_cnt, &retries_cnt, 10); +- if (ret != PRCM_PASS) { ++ while ((vc_bypass_value & OMAP3430_VALID) != 0x0) { ++ loop_cnt++; ++ if (retries_cnt > 10) { + printk(KERN_INFO "Loop count exceeded in check SR I2C" + "write\n"); +- return ret; ++ return SR_FAIL; ++ } ++ if (loop_cnt > 50) { ++ retries_cnt++; ++ loop_cnt = 0; ++ udelay(10); + } ++ vc_bypass_value = prm_read_mod_reg(OMAP3430_GR_MOD, ++ OMAP3_PRM_VC_BYPASS_VAL_OFFSET); + } + +- omap_udelay(T2_SMPS_UPDATE_DELAY); ++ udelay(T2_SMPS_UPDATE_DELAY); + + if (sr_status) { + if (vdd == PRCM_VDD1) +@@ -696,13 +825,15 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel) + } + + /* Sysfs interface to select SR VDD1 auto compensation */ +-static ssize_t omap_sr_vdd1_autocomp_show(struct kset *subsys, char *buf) ++static ssize_t omap_sr_vdd1_autocomp_show(struct kobject *kobj, ++ struct kobj_attribute *attr, char *buf) + { + return sprintf(buf, "%d\n", sr1.is_autocomp_active); + } + +-static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys, +- const char *buf, size_t n) ++static ssize_t omap_sr_vdd1_autocomp_store(struct kobject *kobj, ++ struct kobj_attribute *attr, ++ const char *buf, size_t n) + { + u32 current_vdd1opp_no; + unsigned short value; +@@ -722,7 +853,7 @@ static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys, + return n; + } + +-static struct subsys_attribute sr_vdd1_autocomp = { ++static struct kobj_attribute sr_vdd1_autocomp = { + .attr = { + .name = __stringify(sr_vdd1_autocomp), + .mode = 0644, +@@ -732,13 +863,15 @@ static struct subsys_attribute sr_vdd1_autocomp = { + }; + + /* Sysfs interface to select SR VDD2 auto compensation */ +-static ssize_t omap_sr_vdd2_autocomp_show(struct kset *subsys, char *buf) ++static ssize_t omap_sr_vdd2_autocomp_show(struct kobject *kobj, ++ struct kobj_attribute *attr, char *buf) + { + return sprintf(buf, "%d\n", sr2.is_autocomp_active); + } + +-static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys, +- const char *buf, size_t n) ++static ssize_t omap_sr_vdd2_autocomp_store(struct kobject *kobj, ++ struct kobj_attribute *attr, ++ const char *buf, size_t n) + { + u32 current_vdd2opp_no; + unsigned short value; +@@ -758,7 +891,7 @@ static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys, + return n; + } + +-static struct subsys_attribute sr_vdd2_autocomp = { ++static struct kobj_attribute sr_vdd2_autocomp = { + .attr = { + .name = __stringify(sr_vdd2_autocomp), + .mode = 0644, +@@ -774,15 +907,19 @@ static int __init omap3_sr_init(void) + int ret = 0; + u8 RdReg; + +-#ifdef CONFIG_ARCH_OMAP34XX +- sr1.fck = clk_get(NULL, "sr1_fck"); +- if (IS_ERR(sr1.fck)) +- printk(KERN_ERR "Could not get sr1_fck\n"); +- +- sr2.fck = clk_get(NULL, "sr2_fck"); +- if (IS_ERR(sr2.fck)) +- printk(KERN_ERR "Could not get sr2_fck\n"); +-#endif /* #ifdef CONFIG_ARCH_OMAP34XX */ ++ if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) { ++ current_vdd1_opp = PRCM_VDD1_OPP3; ++ current_vdd2_opp = PRCM_VDD2_OPP3; ++ } else { ++ current_vdd1_opp = PRCM_VDD1_OPP1; ++ current_vdd2_opp = PRCM_VDD1_OPP1; ++ } ++ if (cpu_is_omap34xx()) { ++ sr_clk_get(&sr1); ++ sr_clk_get(&sr2); ++ } ++ sr_set_clk_length(&sr1); ++ sr_set_clk_length(&sr2); + + /* Call the VPConfig, VCConfig, set N Values. */ + sr_set_nvalues(&sr1); +@@ -794,22 +931,24 @@ static int __init omap3_sr_init(void) + sr_configure_vc(); + + /* Enable SR on T2 */ +- ret = t2_in(PM_RECEIVER, &RdReg, R_DCDC_GLOBAL_CFG); +- RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX; +- ret |= t2_out(PM_RECEIVER, RdReg, R_DCDC_GLOBAL_CFG); ++ ret = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &RdReg, ++ R_DCDC_GLOBAL_CFG); + ++ RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX; ++ ret |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg, ++ R_DCDC_GLOBAL_CFG); + + printk(KERN_INFO "SmartReflex driver initialized\n"); + +- ret = subsys_create_file(&power_subsys, &sr_vdd1_autocomp); ++ ret = sysfs_create_file(power_kobj, &sr_vdd1_autocomp.attr); + if (ret) +- printk(KERN_ERR "subsys_create_file failed: %d\n", ret); ++ printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); + +- ret = subsys_create_file(&power_subsys, &sr_vdd2_autocomp); ++ ret = sysfs_create_file(power_kobj, &sr_vdd2_autocomp.attr); + if (ret) +- printk(KERN_ERR "subsys_create_file failed: %d\n", ret); ++ printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); + + return 0; + } + +-arch_initcall(omap3_sr_init); ++late_initcall(omap3_sr_init); +diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h +index 2091a15..194429e 100644 +--- a/arch/arm/mach-omap2/smartreflex.h ++++ b/arch/arm/mach-omap2/smartreflex.h +@@ -233,12 +233,18 @@ + extern u32 current_vdd1_opp; + extern u32 current_vdd2_opp; + ++#ifdef CONFIG_OMAP_SMARTREFLEX_TESTING ++#define SR_TESTING_NVALUES 1 ++#else ++#define SR_TESTING_NVALUES 0 ++#endif ++ + /* + * Smartreflex module enable/disable interface. + * NOTE: if smartreflex is not enabled from sysfs, these functions will not + * do anything. + */ +-#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE) ++#ifdef CONFIG_OMAP_SMARTREFLEX + void enable_smartreflex(int srid); + void disable_smartreflex(int srid); + #else +@@ -246,7 +252,6 @@ static inline void enable_smartreflex(int srid) {} + static inline void disable_smartreflex(int srid) {} + #endif + +- + #endif + + +diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig +index b085b07..960c13f 100644 +--- a/arch/arm/plat-omap/Kconfig ++++ b/arch/arm/plat-omap/Kconfig +@@ -56,6 +56,37 @@ config OMAP_DEBUG_CLOCKDOMAIN + for every clockdomain register write. However, the + extra detail costs some memory. + ++config OMAP_SMARTREFLEX ++ bool "SmartReflex support" ++ depends on ARCH_OMAP34XX && TWL4030_CORE ++ help ++ Say Y if you want to enable SmartReflex. ++ ++ SmartReflex can perform continuous dynamic voltage ++ scaling around the nominal operating point voltage ++ according to silicon characteristics and operating ++ conditions. Enabling SmartReflex reduces power ++ consumption. ++ ++ Please note, that by default SmartReflex is only ++ initialized. To enable the automatic voltage ++ compensation for VDD1 and VDD2, user must write 1 to ++ /sys/power/sr_vddX_autocomp, where X is 1 or 2. ++ ++config OMAP_SMARTREFLEX_TESTING ++ bool "Smartreflex testing support" ++ depends on OMAP_SMARTREFLEX ++ default n ++ help ++ Say Y if you want to enable SmartReflex testing with SW hardcoded ++ NVALUES intead of E-fuse NVALUES set in factory silicon testing. ++ ++ In some devices the E-fuse values have not been set, even though ++ SmartReflex modules are included. Using these hardcoded values set ++ in software, one can test the SmartReflex features without E-fuse. ++ ++ WARNING: Enabling this option may cause your device to hang! ++ + config OMAP_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_OMAP +-- +1.5.4.3 diff --git a/packages/linux/linux-omap2-git/omap3evm/defconfig b/packages/linux/linux-omap2-git/omap3evm/defconfig index 51575d69ea..f74cef90ee 100644 --- a/packages/linux/linux-omap2-git/omap3evm/defconfig +++ b/packages/linux/linux-omap2-git/omap3evm/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5-omap1 -# Tue Jun 10 21:11:56 2008 +# Linux kernel version: 2.6.26-rc3-omap1 +# Wed May 21 07:38:41 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y @@ -43,8 +42,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y +# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y @@ -65,12 +63,12 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_COMPAT_BRK is not set +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -80,9 +78,8 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set @@ -99,7 +96,7 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -115,12 +112,12 @@ CONFIG_LSF=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y # @@ -173,11 +170,10 @@ CONFIG_ARCH_OMAP3=y # # OMAP Feature Selections # +CONFIG_OMAP_DEBUG_SRAM_PATCH=y # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set -CONFIG_OMAP_SMARTREFLEX=y -# CONFIG_OMAP_SMARTREFLEX_TESTING is not set -CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_RESET_CLOCKS is not set CONFIG_OMAP_BOOT_TAG=y CONFIG_OMAP_BOOT_REASON=y # CONFIG_OMAP_COMPONENT_VERSION is not set @@ -202,6 +198,7 @@ CONFIG_ARCH_OMAP3430=y # CONFIG_MACH_OMAP_LDP is not set # CONFIG_MACH_OMAP_3430SDP is not set CONFIG_MACH_OMAP3EVM=y +# CONFIG_MACH_OMAP3_BEAGLE is not set # # Boot options @@ -232,9 +229,13 @@ CONFIG_CPU_CP15_MMU=y # Processor Features # CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y +# CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_LOCKDOWN_TO_64K_L2 is not set +# CONFIG_CPU_LOCKDOWN_TO_128K_L2 is not set +CONFIG_CPU_LOCKDOWN_TO_256K_L2=y +# CONFIG_CPU_L2CACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y # CONFIG_OUTER_CACHE is not set @@ -249,14 +250,14 @@ CONFIG_HAS_TLS_REG=y # # Kernel Features # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y +# CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -272,7 +273,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_LEDS=y +# CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y # @@ -280,44 +281,14 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE=" debug " +CONFIG_CMDLINE=" quiet " # CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPUIdle -# - -# -# CPU idle PM support -# -CONFIG_CPU_IDLE=y - -# -# Governors -# -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_KEXEC is not set # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ is not set # # Floating point emulation @@ -326,15 +297,18 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # # At least one emulation must be selected # +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y -CONFIG_NEON=y +# CONFIG_NEON is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y # @@ -345,7 +319,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y -CONFIG_APM_EMULATION=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y # @@ -364,16 +338,12 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=y -# CONFIG_NET_KEY_MIGRATE is not set +# CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -418,9 +388,10 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set +CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -438,25 +409,25 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y +CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y +CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=y -CONFIG_BT_HCIUSB_SCO=y -CONFIG_BT_HCIBTSDIO=y +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +CONFIG_BT_HCIBTSDIO=m # CONFIG_BT_HCIUART is not set -CONFIG_BT_HCIBCM203X=y -CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIBRF6150 is not set # CONFIG_BT_HCIH4P is not set @@ -466,10 +437,10 @@ CONFIG_BT_HCIBPA10X=y # # Wireless # -CONFIG_CFG80211=y +CONFIG_CFG80211=m CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y -CONFIG_MAC80211=y +CONFIG_MAC80211=m # # Rate control algorithm selection @@ -487,14 +458,14 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set # CONFIG_MAC80211_DEBUG is not set -CONFIG_IEEE80211=y +CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -518,7 +489,7 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -538,8 +509,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -550,6 +523,10 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -558,6 +535,9 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y # CONFIG_MTD_PLATRAM is not set # @@ -576,17 +556,14 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=y -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set # # UBI - Unsorted block images @@ -596,19 +573,17 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_EEPROM_93CX6=m # CONFIG_OMAP_STI is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y @@ -617,76 +592,33 @@ CONFIG_HAVE_IDE=y # # SCSI device support # -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -CONFIG_DM_DELAY=m -# CONFIG_DM_UEVENT is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -CONFIG_DUMMY=m +CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=m +# CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_NET_ETHERNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -696,13 +628,14 @@ CONFIG_MII=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_DEBUG is not set -CONFIG_USB_ZD1201=m +# CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set -# CONFIG_P54_COMMON is not set +CONFIG_P54_COMMON=m +# CONFIG_P54_USB is not set # CONFIG_IWLWIFI_LEDS is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y @@ -719,9 +652,9 @@ CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=y -CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m @@ -738,15 +671,15 @@ CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=m # CONFIG_WAN is not set CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m -# CONFIG_PPPOL2TP is not set +CONFIG_PPPOL2TP=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set @@ -764,14 +697,10 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_APMPOWER is not set +CONFIG_INPUT_EVBUG=y # # Input Device Drivers @@ -785,30 +714,30 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_GPIO is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -817,7 +746,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -868,7 +797,7 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -877,35 +806,34 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_TLV320AIC23 is not set CONFIG_TWL4030_CORE=y CONFIG_TWL4030_GPIO=y -CONFIG_TWL4030_MADC=m +# CONFIG_TWL4030_MADC is not set CONFIG_TWL4030_USB=y CONFIG_TWL4030_USB_HS_ULPI=y -CONFIG_TWL4030_PWRBUTTON=y -CONFIG_TWL4030_POWEROFF=y +# CONFIG_TWL4030_PWRBUTTON is not set +# CONFIG_TWL4030_POWEROFF is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_TSL2563 is not set # CONFIG_LP5521 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_DEBUG=y CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_OMAP24XX is not set +CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set -CONFIG_SPI_TSC2101=y -CONFIG_SPI_TSC2102=y +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC2301 is not set # CONFIG_SPI_SPIDEV is not set @@ -928,65 +856,8 @@ CONFIG_HAVE_GPIO_LIB=y # # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=m -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_APM_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_BQ27x00 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_SENSORS_TSC210X is not set -CONFIG_SENSORS_OMAP34XX=y -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -1029,13 +900,14 @@ CONFIG_SSB_POSSIBLE=y # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set @@ -1051,8 +923,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers @@ -1062,17 +934,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_OMAP=y # CONFIG_FB_OMAP_LCDC_EXTERNAL is not set # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4 +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -1098,26 +966,23 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set +# CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y +# CONFIG_SND_MIXER_OSS is not set CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_DEBUG_DETECT=y +CONFIG_SND_PCM_XRUN_DEBUG=y # # Generic devices # # CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set @@ -1138,9 +1003,8 @@ CONFIG_SND_VERBOSE_PROCFS=y # # USB devices # -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -# CONFIG_SND_USB_CAIAQ_INPUT is not set +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support @@ -1155,14 +1019,19 @@ CONFIG_SND_SOC=y # SoC Audio for the Texas Instruments OMAP # CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3EVM=y +CONFIG_SND_SOC_TWL4030=y # # Open Sound System # -# CONFIG_SOUND_PRIME is not set +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y +# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1186,8 +1055,8 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -CONFIG_USB_OTG=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -1198,23 +1067,26 @@ CONFIG_USB_OTG=y CONFIG_USB_EHCI_HCD=y CONFIG_OMAP_EHCI_PHY_MODE=y # CONFIG_OMAP_EHCI_TLL_MODE is not set -CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_ISP116X_HCD=y # CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=y +CONFIG_USB_R8A66597_HCD=y +CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SOC=y # # OMAP 343x high speed USB support # -# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_INVENTRA_DMA=y @@ -1224,9 +1096,8 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # # USB Device Class drivers # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -# CONFIG_USB_WDM is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1235,103 +1106,43 @@ CONFIG_USB_PRINTER=m # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # -CONFIG_USB_SERIAL=m -# CONFIG_USB_EZUSB is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_FUNSOFT is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_IUU is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_MOTOROLA is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_SPCP8X5 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_DEBUG is not set +# CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m +# CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -CONFIG_USB_GADGET=y +CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y @@ -1344,19 +1155,21 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=m # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_G_PRINTER=m CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y @@ -1366,32 +1179,14 @@ CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_SDIO_UART=y -# CONFIG_MMC_TEST is not set +CONFIG_SDIO_UART=m # # MMC/SD Host Controller Drivers # CONFIG_MMC_OMAP_HS=y -CONFIG_MMC_SPI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_OMAP_DEBUG is not set -# CONFIG_LEDS_OMAP is not set -# CONFIG_LEDS_OMAP_PWM is not set -CONFIG_LEDS_GPIO=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1464,9 +1259,9 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_QUOTA=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set @@ -1483,7 +1278,7 @@ CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1502,7 +1297,9 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set # # Pseudo filesystems @@ -1521,7 +1318,7 @@ CONFIG_TMPFS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set +CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set @@ -1530,19 +1327,17 @@ CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y +# CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set @@ -1551,20 +1346,8 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y +# CONFIG_NFS_FS is not set # CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1579,9 +1362,9 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set +CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set @@ -1618,7 +1401,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1631,7 +1414,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # @@ -1649,12 +1432,10 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1666,7 +1447,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set @@ -1689,25 +1470,19 @@ CONFIG_DEBUG_LL=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set -CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data @@ -1722,54 +1497,53 @@ CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_XTS is not set # # Hash modes # -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # # Digest # -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set # # Ciphers # -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # # Compression # -CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y @@ -1780,15 +1554,13 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=y -CONFIG_CRC16=m -CONFIG_CRC_ITU_T=y +# CONFIG_CRC16 is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -CONFIG_CRC7=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/packages/linux/linux-omap2-git/omap3evm/flash.patch b/packages/linux/linux-omap2-git/omap3evm/flash.patch new file mode 100644 index 0000000000..4c76cd97bd --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/flash.patch @@ -0,0 +1,558 @@ +diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile +index 13d0043..d582b8f 100644 +--- a/arch/arm/mach-omap2/Makefile ++++ b/arch/arm/mach-omap2/Makefile +@@ -44,7 +44,8 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ + board-omap3evm-flash.o + obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ + usb-musb.o usb-ehci.o \ +- hsmmc.o ++ hsmmc.o \ ++ board-omap3beagle-flash.o + obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ + hsmmc.o \ + usb-musb.o +diff --git a/arch/arm/mach-omap2/board-omap3beagle-flash.c b/arch/arm/mach-omap2/board-omap3beagle-flash.c +new file mode 100644 +index 0000000..5346df0 +--- /dev/null ++++ b/arch/arm/mach-omap2/board-omap3beagle-flash.c +@@ -0,0 +1,119 @@ ++/* ++ * board-omap3beagle-flash.c ++ * ++ * Copyright (c) 2008 Texas Instruments ++ * ++ * Modified from board-omap3evm-flash.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++#include <linux/mtd/nand.h> ++#include <linux/types.h> ++#include <linux/io.h> ++ ++#include <asm/mach/flash.h> ++#include <asm/arch/board.h> ++#include <asm/arch/gpmc.h> ++#include <asm/arch/nand.h> ++ ++#define GPMC_CS0_BASE 0x60 ++#define GPMC_CS_SIZE 0x30 ++ ++static struct mtd_partition omap3beagle_nand_partitions[] = { ++ /* All the partition sizes are listed in terms of NAND block size */ ++ { ++ .name = "X-Loader", ++ .offset = 0, ++ .size = 4*(64 * 2048), ++ .mask_flags = MTD_WRITEABLE, /* force read-only */ ++ }, ++ { ++ .name = "U-Boot", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ ++ .size = 15*(64 * 2048), ++ .mask_flags = MTD_WRITEABLE, /* force read-only */ ++ }, ++ { ++ .name = "U-Boot Env", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ ++ .size = 1*(64 * 2048), ++ }, ++ { ++ .name = "Kernel", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ ++ .size = 32*(64 * 2048), ++ }, ++ { ++ .name = "File System", ++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct omap_nand_platform_data omap3beagle_nand_data = { ++ .parts = omap3beagle_nand_partitions, ++ .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), ++ .dma_channel = -1, /* disable DMA in OMAP NAND driver */ ++ .nand_setup = NULL, ++ .dev_ready = NULL, ++}; ++ ++static struct resource omap3beagle_nand_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device omap3beagle_nand_device = { ++ .name = "omap2-nand", ++ .id = -1, ++ .dev = { ++ .platform_data = &omap3beagle_nand_data, ++ }, ++ .num_resources = 1, ++ .resource = &omap3beagle_nand_resource, ++}; ++ ++ ++void __init omap3beagle_flash_init(void) ++{ ++ u8 cs = 0; ++ u8 nandcs = GPMC_CS_NUM + 1; ++ ++ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; ++ ++ /* find out the chip-select on which NAND exists */ ++ while (cs < GPMC_CS_NUM) { ++ u32 ret = 0; ++ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); ++ ++ if ((ret & 0xC00) == 0x800) { ++ printk(KERN_INFO "Found NAND on CS%d\n", cs); ++ if (nandcs > GPMC_CS_NUM) ++ nandcs = cs; ++ } ++ cs++; ++ } ++ ++ if (nandcs > GPMC_CS_NUM) { ++ printk(KERN_INFO "NAND: Unable to find configuration " ++ "in GPMC\n "); ++ return; ++ } ++ ++ if (nandcs < GPMC_CS_NUM) { ++ omap3beagle_nand_data.cs = nandcs; ++ omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add + ++ GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); ++ omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); ++ ++ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); ++ if (platform_device_register(&omap3beagle_nand_device) < 0) ++ printk(KERN_ERR "Unable to register NAND device\n"); ++ } ++} +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index c992cc7..99e042e 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -94,6 +94,7 @@ static void __init omap3_beagle_init(void) + hsmmc_init(); + usb_musb_init(); + usb_ehci_init(); ++ omap3beagle_flash_init(); + } + + arch_initcall(omap3_beagle_i2c_init); +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 3d5e432..02b9ced 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -71,7 +71,7 @@ config MTD_NAND_AMS_DELTA + + config MTD_NAND_OMAP2 + tristate "NAND Flash device on OMAP 2420H4/2430SDP boards" +- depends on (ARM && ARCH_OMAP2 && MTD_NAND) ++ depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3) + help + Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms. + +diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c +index 3b7307c..3aac1d2 100644 +--- a/drivers/mtd/nand/omap2.c ++++ b/drivers/mtd/nand/omap2.c +@@ -111,15 +111,6 @@ + static const char *part_probes[] = { "cmdlinepart", NULL }; + #endif + +-static int hw_ecc = 1; +- +-/* new oob placement block for use with hardware ecc generation */ +-static struct nand_ecclayout omap_hw_eccoob = { +- .eccbytes = 12, +- .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, +- .oobfree = {{16, 32}, {33, 63} }, +-}; +- + struct omap_nand_info { + struct nand_hw_control controller; + struct omap_nand_platform_data *pdata; +@@ -133,6 +124,13 @@ struct omap_nand_info { + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; + }; ++ ++/* ++ * omap_nand_wp - This function enable or disable the Write Protect feature on ++ * NAND device ++ * @mtd: MTD device structure ++ * @mode: WP ON/OFF ++ */ + static void omap_nand_wp(struct mtd_info *mtd, int mode) + { + struct omap_nand_info *info = container_of(mtd, +@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) + } + + /* +-* omap_read_buf - read data from NAND controller into buffer +-* @mtd: MTD device structure +-* @buf: buffer to store date +-* @len: number of bytes to read +-*/ ++ * omap_read_buf - read data from NAND controller into buffer ++ * @mtd: MTD device structure ++ * @buf: buffer to store date ++ * @len: number of bytes to read ++ */ + static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len) + { + struct omap_nand_info *info = container_of(mtd, +@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len) + } + + /* +-* omap_write_buf - write buffer to NAND controller +-* @mtd: MTD device structure +-* @buf: data buffer +-* @len: number of bytes to write +-*/ ++ * omap_write_buf - write buffer to NAND controller ++ * @mtd: MTD device structure ++ * @buf: data buffer ++ * @len: number of bytes to write ++ */ + static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len) + { + struct omap_nand_info *info = container_of(mtd, +@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len) + return 0; + } + ++#ifdef CONFIG_MTD_NAND_OMAP_HWECC ++/* ++ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller ++ * @mtd: MTD device structure ++ */ + static void omap_hwecc_init(struct mtd_info *mtd) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); ++ register struct nand_chip *chip = mtd->priv; + unsigned long val = 0x0; + + /* Read from ECC Control Register */ +@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd) + + /* Read from ECC Size Config Register */ + val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); +- /* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */ +- val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F)); ++ /* ECCSIZE1=512 | Select eccResultsize[0-3] */ ++ val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F)); + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); +- +- + } + + /* +- * This function will generate true ECC value, which can be used ++ * gen_true_ecc - This function will generate true ECC value, which can be used + * when correcting data read from NAND flash memory core ++ * @ecc_buf: buffer to store ecc code + */ + static void gen_true_ecc(u8 *ecc_buf) + { +@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf) + } + + /* +- * This function compares two ECC's and indicates if there is an error. +- * If the error can be corrected it will be corrected to the buffer ++ * omap_compare_ecc - This function compares two ECC's and indicates if there ++ * is an error. If the error can be corrected it will be corrected to the ++ * buffer ++ * @ecc_data1: ecc code from nand spare area ++ * @ecc_data2: ecc code from hardware register obtained from hardware ecc ++ * @page_data: page data + */ + static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ + u8 *ecc_data2, /* read from register */ +@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ + } + } + ++/* ++ * omap_correct_data - Compares the ecc read from nand spare area with ECC ++ * registers values and corrects one bit error if it has occured ++ * @mtd: MTD device structure ++ * @dat: page data ++ * @read_ecc: ecc read from nand flash ++ * @calc_ecc: ecc read from ECC registers ++ */ + static int omap_correct_data(struct mtd_info *mtd, u_char * dat, + u_char * read_ecc, u_char * calc_ecc) + { +@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat, + } + + /* +-** Generate non-inverted ECC bytes. +-** +-** Using noninverted ECC can be considered ugly since writing a blank +-** page ie. padding will clear the ECC bytes. This is no problem as long +-** nobody is trying to write data on the seemingly unused page. +-** +-** Reading an erased page will produce an ECC mismatch between +-** generated and read ECC bytes that has to be dealt with separately. +-*/ ++ * omap_calcuate_ecc - Generate non-inverted ECC bytes. ++ * Using noninverted ECC can be considered ugly since writing a blank ++ * page ie. padding will clear the ECC bytes. This is no problem as long ++ * nobody is trying to write data on the seemingly unused page. Reading ++ * an erased page will produce an ECC mismatch between generated and read ++ * ECC bytes that has to be dealt with separately. ++ * @mtd: MTD device structure ++ * @dat: The pointer to data on which ecc is computed ++ * @ecc_code: The ecc_code buffer ++ */ + static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + unsigned long val = 0x0; +- unsigned long reg, n; +- +- /* Ex NAND_ECC_HW12_2048 */ +- if ((info->nand.ecc.mode == NAND_ECC_HW) && +- (info->nand.ecc.size == 2048)) +- n = 4; +- else +- n = 1; ++ unsigned long reg; + + /* Start Reading from HW ECC1_Result = 0x200 */ + reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT); +- while (n--) { +- val = __raw_readl(reg); +- *ecc_code++ = val; /* P128e, ..., P1e */ +- *ecc_code++ = val >> 16; /* P128o, ..., P1o */ +- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ +- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); +- reg += 4; +- } ++ val = __raw_readl(reg); ++ *ecc_code++ = val; /* P128e, ..., P1e */ ++ *ecc_code++ = val >> 16; /* P128o, ..., P1o */ ++ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ ++ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); ++ reg += 4; + + return 0; +-} /* omap_calculate_ecc */ ++} + ++/* ++ * omap_enable_hwecc - This function enables the hardware ecc functionality ++ * @mtd: MTD device structure ++ * @mode: Read/Write mode ++ */ + static void omap_enable_hwecc(struct mtd_info *mtd, int mode) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); ++ register struct nand_chip *chip = mtd->priv; ++ unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG); + + switch (mode) { + case NAND_ECC_READ : + __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); +- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ +- val = (1 << 7) | (0x0) | (0x1) ; ++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ ++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + case NAND_ECC_READSYN : +- __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); +- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ +- val = (1 << 7) | (0x0) | (0x1) ; ++ __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); ++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ ++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + case NAND_ECC_WRITE : + __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); +- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ +- val = (1 << 7) | (0x0) | (0x1) ; ++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ ++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + break; + default: + DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n", +@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) + + __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG); + } ++#endif + ++/* ++ * omap_wait - Wait function is called during Program and erase ++ * operations and the way it is called from MTD layer, we should wait ++ * till the NAND chip is ready after the programming/erase operation ++ * has completed. ++ * @mtd: MTD device structure ++ * @chip: NAND Chip structure ++ */ ++static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) ++{ ++ register struct nand_chip *this = mtd->priv; ++ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, ++ mtd); ++ int status = 0; ++ ++ this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr + ++ GPMC_CS_NAND_COMMAND; ++ this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA; ++ ++ while (!(status & 0x40)) { ++ __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W); ++ status = __raw_readb(this->IO_ADDR_R); ++ } ++ return status; ++} ++ ++/* ++ * omap_dev_ready - calls the platform specific dev_ready function ++ * @mtd: MTD device structure ++ */ + static int omap_dev_ready(struct mtd_info *mtd) + { + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, +@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + struct omap_nand_info *info; + struct omap_nand_platform_data *pdata; + int err; +- unsigned long val; ++ unsigned long val; + + + pdata = pdev->dev.platform_data; +@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + } + + /* Enable RD PIN Monitoring Reg */ +- val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); +- val |= WR_RD_PIN_MONITORING; +- gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); ++ if (pdata->dev_ready) { ++ val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); ++ val |= WR_RD_PIN_MONITORING; ++ gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); ++ } + + val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7); + val &= ~(0xf << 8); + val |= (0xc & 0xf) << 8; + gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val); + ++ /* NAND write protect off */ ++ omap_nand_wp(&info->mtd, NAND_WP_OFF); ++ + if (!request_mem_region(info->phys_base, NAND_IO_SIZE, + pdev->dev.driver->name)) { + err = -EBUSY; +@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + info->nand.write_buf = omap_write_buf; + info->nand.verify_buf = omap_verify_buf; + +- info->nand.dev_ready = omap_dev_ready; +- info->nand.chip_delay = 0; +- +- /* Options */ +- info->nand.options = NAND_BUSWIDTH_16; +- info->nand.options |= NAND_SKIP_BBTSCAN; +- +- if (hw_ecc) { +- /* init HW ECC */ +- omap_hwecc_init(&info->mtd); +- +- info->nand.ecc.calculate = omap_calculate_ecc; +- info->nand.ecc.hwctl = omap_enable_hwecc; +- info->nand.ecc.correct = omap_correct_data; +- info->nand.ecc.mode = NAND_ECC_HW; +- info->nand.ecc.bytes = 12; +- info->nand.ecc.size = 2048; +- info->nand.ecc.layout = &omap_hw_eccoob; +- ++ /* ++ * If RDY/BSY line is connected to OMAP then use the omap ready funcrtion ++ * and the generic nand_wait function which reads the status register ++ * after monitoring the RDY/BSY line.Otherwise use a standard chip delay ++ * which is slightly more than tR (AC Timing) of the NAND device and read ++ * status register until you get a failure or success ++ */ ++ if (pdata->dev_ready) { ++ info->nand.dev_ready = omap_dev_ready; ++ info->nand.chip_delay = 0; + } else { +- info->nand.ecc.mode = NAND_ECC_SOFT; ++ info->nand.waitfunc = omap_wait; ++ info->nand.chip_delay = 50; + } + ++ info->nand.options |= NAND_SKIP_BBTSCAN; ++ if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000) ++ == 0x1000) ++ info->nand.options |= NAND_BUSWIDTH_16; ++ ++#ifdef CONFIG_MTD_NAND_OMAP_HWECC ++ info->nand.ecc.bytes = 3; ++ info->nand.ecc.size = 512; ++ info->nand.ecc.calculate = omap_calculate_ecc; ++ info->nand.ecc.hwctl = omap_enable_hwecc; ++ info->nand.ecc.correct = omap_correct_data; ++ info->nand.ecc.mode = NAND_ECC_HW; ++ ++ /* init HW ECC */ ++ omap_hwecc_init(&info->mtd); ++#else ++ info->nand.ecc.mode = NAND_ECC_SOFT; ++#endif + + /* DIP switches on some boards change between 8 and 16 bit + * bus widths for flash. Try the other width if the first try fails. +@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) + err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); + if (err > 0) + add_mtd_partitions(&info->mtd, info->parts, err); +- else if (err < 0 && pdata->parts) ++ else if (err <= 0 && pdata->parts) + add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); + else + #endif + add_mtd_device(&info->mtd); + +- omap_nand_wp(&info->mtd, NAND_WP_OFF); +- + platform_set_drvdata(pdev, &info->mtd); + + return 0; +diff --git a/include/asm-arm/arch-omap/board-omap3beagle.h b/include/asm-arm/arch-omap/board-omap3beagle.h +index 46dff31..26ecfb8 100644 +--- a/include/asm-arm/arch-omap/board-omap3beagle.h ++++ b/include/asm-arm/arch-omap/board-omap3beagle.h +@@ -29,5 +29,7 @@ + #ifndef __ASM_ARCH_OMAP3_BEAGLE_H + #define __ASM_ARCH_OMAP3_BEAGLE_H + ++extern void omap3beagle_flash_init(void); ++ + #endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ + |