merge of 'd0e2c30b999cbef32c26717651606b8411ad02d6'

     and 'ffac2606c1f6116f54c1871ff55c69f027252547'

1 files changed, 0 insertions, 374 deletions

diff --git a/packages/linux/linux-ezx/e680-leds-r1.patch b/packages/linux/linux-ezx/e680-leds-r1.patch
deleted file mode 100644
index abbab2937d..0000000000
--- a/packages/linux/linux-ezx/e680-leds-r1.patch
+++ /dev/null
@@ -1,374 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.6.16/arch/arm/mach-pxa/ezx.c~e680-leds-r0.patch	2006-06-06 17:14:06.000000000 +0200
-+++ linux-2.6.16/arch/arm/mach-pxa/ezx.c	2006-06-06 17:23:14.000000000 +0200
-@@ -357,6 +357,17 @@
- 	.num_resources	= ARRAY_SIZE(ezx_backlight_resources),
- };
- 
-+#ifdef CONFIG_PXA_EZX_E680
-+/*
-+ * E680 LEDs
-+ */
-+static struct platform_device e680led_device = {
-+	.name		= "e680-led",
-+	.id		= -1,
-+};
-+#endif
-+
-+
- /* keyboard */
- 
- #if defined(CONFIG_PXA_EZX_V700)
-@@ -766,6 +777,9 @@
- 
- static struct platform_device *devices[] __initdata = {
- 	&ezx_bp_device,
-+#ifdef CONFIG_PXA_EZX_E680
-+	&e680led_device,
-+#endif
- };
- 
- static void __init
---- linux-2.6.16/drivers/leds/Kconfig~e680-leds-r0.patch	2006-06-06 17:14:05.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Kconfig	2006-06-06 17:23:14.000000000 +0200
-@@ -59,6 +59,13 @@
- 	  This option enables support for the LEDs on Sharp Zaurus
- 	  SL-6000 series.
- 
-+config LEDS_E680
-+	tristate "LED Support for the Motorola E680(i) GSM Phone"
-+	depends LEDS_CLASS && PXA_EZX_E680
-+	help
-+	  This options enables support for the LEDs on the
-+	  Motorola E680(i) GSM Phone.
-+
- config LEDS_TRIGGER_TIMER
- 	tristate "LED Timer Trigger"
- 	depends LEDS_TRIGGERS
---- linux-2.6.16/drivers/leds/Makefile~e680-leds-r0.patch	2006-06-06 17:14:05.000000000 +0200
-+++ linux-2.6.16/drivers/leds/Makefile	2006-06-06 17:23:14.000000000 +0200
-@@ -10,7 +10,8 @@
- obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
- obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
- obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
-+obj-$(CONFIG_LEDS_E680)		+= leds-e680.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
--obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-\ Kein Zeilenumbruch am Dateiende.
-+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
---- /dev/null	2006-06-06 16:58:36.577045136 +0200
-+++ linux-2.6.16/drivers/leds/leds-e680.c	2006-06-06 17:55:46.000000000 +0200
-@@ -0,0 +1,307 @@
-+/*
-+ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone
-+ *
-+ * Copyright 2006 Vanille-Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+
-+//FIXME move defines to a common header file
-+#define IND_CNTL_R_BUL     46
-+#define IND_CNTL_G_BUL     47
-+#define SSP_PCAP_LED_MASK  0x000fffe0
-+#define SSP_PCAP_LED_SHIFT 5
-+#define GPIO_TC_MM_EN      99
-+
-+static enum led_brightness old_red;
-+static enum led_brightness old_green;
-+static enum led_brightness old_blue;
-+
-+typedef struct {
-+	unsigned char ind_GPIO_red;    /*Indicator Red control GPIO 46: 0 active, 1 disactive*/
-+	unsigned char ind_GPIO_green;  /*Indicator Green control GPIO 47: 0 active, 1 disactive*/
-+	unsigned char pcap_LEDR_en;    /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/
-+	unsigned char pcap_LEDG_en;    /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/
-+	unsigned char pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/
-+	unsigned char pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/
-+	unsigned char pcap_LEDR_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/
-+	unsigned char pcap_LEDG_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/
-+	unsigned char pcap_SKIP_on;  /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/
-+} PCAP2_LED_REGISTER_VALUE;
-+
-+const PCAP2_LED_REGISTER_VALUE led_register_value[]=
-+{
-+  /*  on/off pulsepower  timing  intensity */
-+	{0x1,0x1, 0x0,0x0, 0x0,0x0, 0x0,0x0,0x0}, /* OFF */
-+	{0x0,0x1, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* RED */
-+	{0x1,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* GREEN */
-+	{0x0,0x0, 0x1,0x0, 0xc,0x0, 0x1,0x0,0x0}, /* ORANGE = RED + GREEN */
-+	{0x1,0x1, 0x0,0x1, 0x0,0xc, 0x0,0x0,0x0}, /* BLUE */
-+	{0x0,0x1, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_RED = RED + BLUE */
-+	{0x1,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* LIGHT_GREEN = GREEN + BLUE */
-+	{0x0,0x0, 0x1,0x1, 0xc,0xc, 0x1,0x0,0x0}, /* WHITE = RED + GREEN + BLUE */
-+};
-+
-+static void e680led_led_set( enum led_brightness red, enum led_brightness green, enum led_brightness blue )
-+{
-+	printk( KERN_DEBUG "e680led_led_set: red=%d, green=%d, blue=%d", red, green, blue );
-+	unsigned int tempValue = 0;
-+	unsigned int value = 0;
-+	unsigned int stateIndex = 0;
-+	unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ledg_ctrl, ledr_i, ledg_i,skip;
-+
-+	stateIndex = ( ( blue << 2 ) | ( green << 1 ) | ( red ) )   & 0x7;
-+	printk( KERN_DEBUG "LED stateIndex is %d", stateIndex );
-+	gpio_red   = led_register_value[stateIndex].ind_GPIO_red    & 0x1;
-+	gpio_green = led_register_value[stateIndex].ind_GPIO_green  & 0x1;
-+	ledr_en    = led_register_value[stateIndex].pcap_LEDR_en    & 0x1;
-+	ledg_en    = led_register_value[stateIndex].pcap_LEDG_en    & 0x1;
-+	ledr_ctrl  = led_register_value[stateIndex].pcap_LEDR_CTRL  & 0xf;
-+	ledg_ctrl  = led_register_value[stateIndex].pcap_LEDG_CTRL  & 0xf;
-+	ledr_i     = led_register_value[stateIndex].pcap_LEDR_I     & 0x3;
-+	ledg_i     = led_register_value[stateIndex].pcap_LEDG_I     & 0x3;
-+	skip       = led_register_value[stateIndex].pcap_SKIP_on    & 0x1;
-+
-+	/* disable LEDs */
-+	if( ezx_pcap_read(SSP_PCAP_ADJ_PERIPH_REGISTER,&tempValue) != SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_WARNING "LED PCAP Read Failed\n" );
-+		return;
-+	}
-+	tempValue &= (~SSP_PCAP_LED_MASK);
-+	if( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) != SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_WARNING "LED PCAP Write Failed (Clear Data)\n" );
-+		return;
-+	}
-+	
-+	/* configure GPIOs as output */
-+	pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT);
-+	pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT);
-+
-+	//FIXME: Simplify this logic
-+	if ( (gpio_green && gpio_red) )
-+	{
-+		/*Disable Red & Green signal*/
-+		set_GPIO(IND_CNTL_R_BUL); /*IND_CNTL_R_BUL Low active*/
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL);
-+		
-+		clr_GPIO(IND_CNTL_G_BUL); /*IND_CNTL_G_BUL High active*/
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL));
-+		
-+		printk( KERN_DEBUG "LED GPIO Green & Red Disable\n");
-+	} else if ( gpio_green && !gpio_red )
-+	{
-+		/*Green Disable, Red Enable*/
-+		clr_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL));
-+		
-+		clr_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) & (~GPIO_bit(IND_CNTL_G_BUL));
-+	
-+		printk( KERN_DEBUG "LED GPIO Green Disable, Red Enable\n");
-+	} else if (gpio_red && !gpio_green )
-+	{
-+		/*Red Disable, Green Enable*/
-+		set_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) | GPIO_bit(IND_CNTL_R_BUL);
-+		
-+		set_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL);
-+		printk( KERN_DEBUG "LED GPIO Red Disable, Green Enable");
-+	}else
-+	{
-+		/*Red & Green enable*/
-+		clr_GPIO(IND_CNTL_R_BUL);
-+		PGSR(IND_CNTL_R_BUL) = PGSR(IND_CNTL_R_BUL) & (~GPIO_bit(IND_CNTL_R_BUL));
-+		
-+		set_GPIO(IND_CNTL_G_BUL);
-+		PGSR(IND_CNTL_G_BUL) = PGSR(IND_CNTL_G_BUL) | GPIO_bit(IND_CNTL_G_BUL);
-+		printk( KERN_DEBUG "LED GPIO Red & Green Enable\n");
-+	}
-+	
-+	/* Write PCAP LED Peripheral Control Register*/
-+	value = ( ledr_en | (ledg_en <<1) | (ledr_ctrl <<2) | (ledg_ctrl <<6) |
-+		(ledr_i << 10) | (ledg_i <<12) | (skip <<14) ) & 0x7fff;
-+	tempValue |= (value <<SSP_PCAP_LED_SHIFT);
-+	
-+	if ( ezx_pcap_write(SSP_PCAP_ADJ_PERIPH_REGISTER,tempValue) == SSP_PCAP_SUCCESS )
-+	{
-+		printk( KERN_DEBUG "LED PCAP Write Success (0x%x :0x%x)\n",tempValue,value);
-+		old_red = red;
-+		old_green = green;
-+		old_blue = blue;
-+		return;
-+	} else {
-+		printk( KERN_DEBUG "LED PCAP Write Failed (State Change)\n");
-+		return;
-+	}
-+}
-+
-+static void e680led_red_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_red_set: %d\n", value );
-+	e680led_led_set( 1 && value, old_green, old_blue );
-+}
-+
-+static void e680led_green_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_green_set: %d\n", value );
-+	e680led_led_set( old_red, 1 && value, old_blue );
-+}
-+
-+static void e680led_blue_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	printk( KERN_DEBUG "e680led_blue_set: %d\n", value );
-+	e680led_led_set( old_red, old_green, 1 && value );
-+}
-+
-+static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	/* this is not working yet, as there is something else missing */
-+#if 0
-+	printk( KERN_DEBUG "e680led_keypad_set: %d\n", value );
-+
-+	pxa_gpio_mode(GPIO_TC_MM_EN);
-+	GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
-+	GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+
-+	udelay( 100 );
-+
-+    if ( value ) {
-+		GPCR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+		PGSR3 &= ~GPIO_bit(GPIO_TC_MM_EN);
-+    } else {
-+		GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+		PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
-+    }
-+#endif
-+}
-+
-+static struct led_classdev e680_red_led = {
-+	.name			= "e680:red",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_red_set,
-+};
-+
-+static struct led_classdev e680_green_led = {
-+	.name			= "e680:green",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_green_set,
-+};
-+
-+static struct led_classdev e680_blue_led = {
-+	.name			= "e680:blue",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_blue_set,
-+};
-+
-+static struct led_classdev e680_keypad_led = {
-+	.name			= "e680:keypad",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_keypad_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int e680led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	led_classdev_suspend(&e680_red_led);
-+	led_classdev_suspend(&e680_green_led);
-+	led_classdev_suspend(&e680_blue_led);
-+	led_classdev_suspend(&e680_keypad_led);
-+	return 0;
-+}
-+
-+static int e680led_resume(struct platform_device *dev)
-+{
-+	led_classdev_resume(&e680_red_led);
-+	led_classdev_resume(&e680_green_led);
-+	led_classdev_resume(&e680_blue_led);
-+	led_classdev_resume(&e680_keypad_led);
-+	return 0;
-+}
-+#endif
-+
-+static int e680led_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_red_led);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_green_led);
-+	if (ret < 0)
-+		led_classdev_unregister(&e680_red_led);
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_blue_led);
-+	if (ret < 0) {
-+		led_classdev_unregister(&e680_red_led);
-+		led_classdev_unregister(&e680_green_led);
-+	}
-+	
-+	ret = led_classdev_register(&pdev->dev, &e680_keypad_led);
-+	if (ret < 0) {
-+		led_classdev_unregister(&e680_red_led);
-+		led_classdev_unregister(&e680_green_led);
-+		led_classdev_unregister(&e680_blue_led);
-+	}
-+	return ret;
-+}
-+
-+static int e680led_remove(struct platform_device *pdev)
-+{
-+	led_classdev_unregister(&e680_red_led);
-+	led_classdev_unregister(&e680_green_led);
-+	led_classdev_unregister(&e680_blue_led);
-+	led_classdev_unregister(&e680_keypad_led);
-+	return 0;
-+}
-+
-+static struct platform_driver e680led_driver = {
-+	.probe		= e680led_probe,
-+	.remove		= e680led_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= e680led_suspend,
-+	.resume		= e680led_resume,
-+#endif
-+	.driver		= {
-+		.name		= "e680-led",
-+	},
-+};
-+
-+static int __init e680led_init(void)
-+{
-+	return platform_driver_register(&e680led_driver);
-+}
-+
-+static void __exit e680led_exit(void)
-+{
-+	e680led_led_set( 0, 0, 0 );
-+	platform_driver_unregister(&e680led_driver);
-+}
-+
-+module_init(e680led_init);
-+module_exit(e680led_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Motorola E680 LED driver");
-+MODULE_LICENSE("GPL");