linux-ezx all: remove unmaintained kernels

1 files changed, 0 insertions, 83 deletions

diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-pcap.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-pcap.patch
deleted file mode 100644
index 8aa1e46d73..0000000000
--- a/packages/linux/linux-ezx-2.6.23/patches/a1200-pcap.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-07 11:32:32.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-07 11:51:55.000000000 -0300
-@@ -19,6 +19,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
-+#include <asm/arch/ezx-pcap.h>
- 
- #include "generic.h"
- 
-@@ -48,7 +49,70 @@
-        .pxafb_lcd_power = &ezx_lcd_power,
- };
- 
-+/* PCAP */
-+static int __init a1200_pcap_init(void)
-+{
-+	/*
-+	 * FIXME: this is the PCAP INITIAL STATE.
-+	 * most of these writes should NOT be done here
-+	 * * voltage regulators, voltage enablers should be set by the
-+	 *   driver which uses the connected hardware. Otherwise you
-+	 *   drain power unnecessarily.
-+	 * * interrupt related registers should be set by the irq functions
-+	 *   only. I think that the INT_SEL register selects on which irq
-+	 *   pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but
-+	 *   only if it actually makes any difference.
-+	 * * Only power state automatic changes should be done here.
-+	 *   (*LOWPWR, *STBY, LOWPWR*)
-+	 * * I removed some writes which i consider extremelly wrong. And
-+	 *   which i think will not break anything (they were overwritten
-+	 *   later anyway).
-+	 *
-+	 *   --WM
-+	 */
-+	ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */
-+	ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */
-+	ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */
-+	ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c);
-+	ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */
-+
-+	return 0;
-+}
-+
-+static struct pcap_platform_data a1200_pcap_platform_data = {
-+	.port		= 1,
-+	.cs		= GPIO_SPI_CE,
-+	.flags		= PCAP_CS_AH | PCAP_MCI_TF,
-+	.clk		= 1,
-+	.init		= a1200_pcap_init,
-+};
-+
-+static struct resource a1200_pcap_resources[] = {
-+	[0] = {
-+		.start		= IRQ_GPIO1,
-+		.end		= IRQ_GPIO1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device a1200_pcap_device = {
-+	.name		= "ezx-pcap",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(a1200_pcap_resources),
-+	.resource	= a1200_pcap_resources,
-+	.dev		= {
-+		.platform_data = &a1200_pcap_platform_data,
-+	},
-+};
-+
- static struct platform_device *devices[] __initdata = {
-+	&a1200_pcap_device,
- };
- 
- static void __init a1200_init(void)