Merge branch 'org.openembedded.dev' of git@git.openembedded.net:openembedded into org.openembedded.dev

67 files changed, 0 insertions, 30290 deletions

diff --git a/packages/linux/linux-ezx-2.6.21/a1200/defconfig b/packages/linux/linux-ezx-2.6.21/a1200/defconfig
deleted file mode 100755
index 074d70244b..0000000000
--- a/packages/linux/linux-ezx-2.6.21/a1200/defconfig
+++ /dev/null
@@ -1,1586 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.4
-# Sat Sep 15 18:27:06 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-ezxdev"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA_EZX=y
-# CONFIG_PXA_EZX_E680 is not set
-# CONFIG_PXA_EZX_A780 is not set
-# CONFIG_PXA_EZX_E2 is not set
-CONFIG_PXA_EZX_A1200=y
-# CONFIG_PXA_EZX_E6 is not set
-CONFIG_EZX_BP=y
-CONFIG_EZX_PCAP=y
-CONFIG_EZX_EOC=y
-CONFIG_EZX_EMU=y
-CONFIG_EZX_EMU_USB=y
-# CONFIG_EZX_EMU_UART is not set
-# CONFIG_EZX_EMU_NOTHING is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_XIP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-CONFIG_MTD_EZX=y
-CONFIG_MTD_EZX_A780=y
-# CONFIG_MTD_EZX_A780_ALTERNATE is not set
-# CONFIG_MTD_EZX_A120 is not set
-# CONFIG_MTD_EZX_E2 is not set
-# CONFIG_MTD_EZX_E6 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-CONFIG_SHAPER=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=8
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_TS0710_MUX=y
-CONFIG_TS0710_MUX_USB=y
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# V4L USB devices
-#
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_USB_DSBR is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_EZX=N
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=y
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_SSP=y
-CONFIG_SND_PXA2XX_SOC_EZX=y
-CONFIG_SND_SOC_PCAP2=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux-ezx-2.6.21/a780/defconfig b/packages/linux/linux-ezx-2.6.21/a780/defconfig
deleted file mode 100755
index 30f9f72174..0000000000
--- a/packages/linux/linux-ezx-2.6.21/a780/defconfig
+++ /dev/null
@@ -1,1590 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.4
-# Fri Sep 21 18:10:00 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-ezxdev"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA_EZX=y
-# CONFIG_PXA_EZX_E680 is not set
-CONFIG_PXA_EZX_A780=y
-# CONFIG_PXA_EZX_E2 is not set
-# CONFIG_PXA_EZX_A1200 is not set
-# CONFIG_PXA_EZX_E6 is not set
-CONFIG_EZX_BP=y
-CONFIG_EZX_PCAP=y
-# CONFIG_EZX_EOC is not set
-CONFIG_EZX_EMU=y
-CONFIG_EZX_EMU_USB=y
-# CONFIG_EZX_EMU_UART is not set
-# CONFIG_EZX_EMU_NOTHING is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_XIP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-CONFIG_MTD_EZX=y
-# CONFIG_MTD_EZX_A780 is not set
-CONFIG_MTD_EZX_A780_ALTERNATE=y
-# CONFIG_MTD_EZX_A1200 is not set
-# CONFIG_MTD_EZX_E2 is not set
-# CONFIG_MTD_EZX_E6 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-CONFIG_SHAPER=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=8
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_TS0710_MUX=y
-CONFIG_TS0710_MUX_USB=y
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_A780=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# V4L USB devices
-#
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_USB_DSBR is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_EZX=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_LCD_QVGA=y
-# CONFIG_FB_PXA_LCD_VGA is not set
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=y
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_SSP=y
-CONFIG_SND_PXA2XX_SOC_EZX=y
-CONFIG_SND_SOC_PCAP2=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux-ezx-2.6.21/e680/defconfig b/packages/linux/linux-ezx-2.6.21/e680/defconfig
deleted file mode 100755
index 9a30ce673f..0000000000
--- a/packages/linux/linux-ezx-2.6.21/e680/defconfig
+++ /dev/null
@@ -1,1584 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.4
-# Sun Sep  9 16:51:47 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-ezxdev"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA_EZX=y
-CONFIG_PXA_EZX_E680=y
-# CONFIG_PXA_EZX_A780 is not set
-# CONFIG_PXA_EZX_E2 is not set
-# CONFIG_PXA_EZX_A1200 is not set
-# CONFIG_PXA_EZX_E6 is not set
-CONFIG_EZX_BP=y
-CONFIG_EZX_PCAP=y
-CONFIG_EZX_EMU=y
-CONFIG_EZX_EMU_USB=y
-# CONFIG_EZX_EMU_UART is not set
-# CONFIG_EZX_EMU_NOTHING is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_XIP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-CONFIG_MTD_EZX=y
-CONFIG_MTD_EZX_A780=y
-# CONFIG_MTD_EZX_A780_ALTERNATE is not set
-# CONFIG_MTD_EZX_E2 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-CONFIG_SHAPER=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=8
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_TS0710_MUX=y
-CONFIG_TS0710_MUX_USB=y
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_E680 is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# V4L USB devices
-#
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_USB_DSBR is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_EZX=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=y
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_SSP=y
-CONFIG_SND_PXA2XX_SOC_EZX=y
-CONFIG_SND_SOC_PCAP2=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=n
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux-ezx-2.6.21/patches/Makefile.OpenEZX b/packages/linux/linux-ezx-2.6.21/patches/Makefile.OpenEZX
deleted file mode 100755
index c6d90c61b9..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/Makefile.OpenEZX
+++ /dev/null
@@ -1,77 +0,0 @@
-# Makefile used to build binary images of OpenEZX kernels
-#
-# If you are currently in the linux kernel toplevel dir,
-# you can call this Makefile with:
-#   $ make -f path_to/Makefile.OpenEZX
-#
-# Note that you can set the CROSS_COMPILE and QUILT_PATCHES variable
-# in your environment.
-#
-
-PHONES = a780 e680 a1200 e6 e2
-
-CROSS_COMPILE ?= /home/wyrm/ezx/dev/cross/bin/arm-angstrom-linux-gnueabi-
-QUILT_PATCHES ?= patches
-
-LV ?= ezxdev	# replace LOCALVERSION string
-J ?= 2		# simultaneous jobs
-SIG ?= 0	# BOOL sign md5sums file
-
-DATE = $(shell date +%Y%m%d)
-DEPLOY_SERVER ?= people.openezx.org
-DEPLOY_DIR ?= public_html/images/$(DATE)/
-
-all: $(foreach p, $(PHONES), zImage-$(p) modules-$(p).tar.gz)
-
-zImages: $(foreach p, $(PHONES), zImage-$(p))
-
-modules: $(foreach p, $(PHONES), modules-$(p).tar.gz)
-
-config: $(foreach p, $(PHONES), config-$(p))
-
-config-%: $(QUILT_PATCHES)/defconfig-%
-	cp $<  .config
-	make ARCH=arm oldconfig
-	cp .config $<
-
-deploy: release
-	ssh $(DEPLOY_SERVER) \
-		mkdir -p $(DEPLOY_DIR)
-	scp ezxrelease-$(DATE).tar $(DEPLOY_SERVER):$(DEPLOY_DIR)
-	ssh $(DEPLOY_SERVER) \
-		cd $(DEPLOY_DIR)\; \
-		tar -xf ezxrelease-$(DATE).tar\; \
-		rm -f ezxrelease-$(DATE).tar
-
-release: $(foreach p, $(PHONES), tag-$(p))
-	cp md5sums.tmp md5sums
-	test "$(SIG)" = "1" && \
-		cat md5sums.tmp | gpg --clearsign > md5sums \
-	; echo
-	tar -rf ezxrelease.tar md5sums
-	rm -f md5sums.tmp md5sums
-	mv ezxrelease.tar ezxrelease-$(DATE).tar
-
-tag-%: zImage-% modules-%.tar.gz
-	p=$(patsubst tag-%,%,$@) && \
-	tag=$(shell cat include/config/kernel.release)-$(DATE) && \
-	mv zImage-$$p zImage-$$tag-$$p && \
-	mv modules-$$p.tar.gz modules-$$tag-$$p.tar.gz && \
-	tar -rf ezxrelease.tar zImage-$$tag-$$p modules-$$tag-$$p.tar.gz && \
-	md5sum zImage-$$tag-$$p modules-$$tag-$$p.tar.gz >> md5sums.tmp && \
-	rm -f zImage-$$tag-$$p modules-$$tag-$$p.tar.gz
-
-zImage-%: $(QUILT_PATCHES)/defconfig-%
-	cat $< | sed 's/LOCALVERSION=".*"$$/LOCALVERSION="-$(LV)"/' > .config
-	make -j$(J) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) zImage
-	mv arch/arm/boot/zImage $@
-
-modules-%.tar.gz: $(QUILT_PATCHES)/defconfig-%
-	cat $< | sed 's/LOCALVERSION=".*"$$/LOCALVERSION="-$(LV)"/' > .config
-	-find . -name "*.ko" -print0 | xargs -r0 rm
-	mkdir -p Makefile.OpenEZX-tmp/$@
-	make -j$(J) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) modules
-	make -j1 ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) \
-		INSTALL_MOD_PATH=Makefile.OpenEZX-tmp/$@ modules_install
-	tar -C Makefile.OpenEZX-tmp/$@ -czf $@ .
-	rm -rf Makefile.OpenEZX-tmp/
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-eoc.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-eoc.patch
deleted file mode 100644
index 77aec1c629..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a1200-eoc.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-24 20:14:54.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-24 20:15:18.000000000 -0300
-@@ -203,8 +203,15 @@
- 	},
- };
- 
-+
-+struct platform_device a1200_eoc_device = {
-+	.name		= "ezx-eoc",
-+	.id		= -1,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&a1200_pcap_device,
-+	&a1200_eoc_device,
- };
- 
- static void __init a1200_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-flip.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-flip.patch
deleted file mode 100644
index fc51773205..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a1200-flip.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-25 02:00:53.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-25 02:01:06.000000000 -0300
-@@ -16,6 +16,7 @@
- #include <linux/mmc/host.h>
- #include <linux/irq.h>
- #include <linux/input.h>
-+#include <linux/gpio_keys.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -292,11 +293,34 @@
- 	.num_resources  = ARRAY_SIZE(pcap_ts_resources),
- 	.resource       = pcap_ts_resources,
- };
-+/* Flip */
-+#undef GPIO_FLIP_PIN
-+#define GPIO_FLIP_PIN 15 /* FIXME */
-+static struct gpio_keys_button a1200flip_buttons[] = {
-+	[0] = {
-+        	.keycode        = KEY_SLEEP,
-+		.gpio           = GPIO_FLIP_PIN,
-+		.desc           = "A1200 flip",
-+	},
-+};
-+
-+static struct gpio_keys_platform_data a1200flip_platform_data = {
-+	.buttons        = a1200flip_buttons,
-+	.nbuttons       = 1,
-+};
-+static struct platform_device a1200flip_device = {
-+	.name           = "gpio-keys",
-+	.id             = -1,
-+	.dev            = {
-+		.platform_data  = &a1200flip_platform_data,
-+	},
-+};
- 
- static struct platform_device *devices[] __initdata = {
- 	&a1200_pcap_device,
- 	&a1200_eoc_device,
- 	&pcap_ts_device,
-+	&a1200flip_device,
- };
- 
- static void __init a1200_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-kbd.patch
deleted file mode 100644
index 5771f6d359..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a1200-kbd.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-25 00:03:01.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-25 02:00:40.000000000 -0300
-@@ -15,6 +15,7 @@
- #include <linux/fb.h>
- #include <linux/mmc/host.h>
- #include <linux/irq.h>
-+#include <linux/input.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -23,11 +24,13 @@
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
- #include <asm/arch/mmc.h>
-+#include <asm/arch/kbd.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
-+extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *);
- 
- #ifdef CONFIG_EZX_PCAP
- extern int ezx_pcap_mmcsd_power(int);
-@@ -209,6 +212,63 @@
- 	.id		= -1,
- };
- 
-+/* Keypad */
-+static unsigned char a1200_keycode[] = {
-+	/* row 0 */
-+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-+	/* row 1 */
-+	KEY_RIGHT, KEY_DOWN, KEY_KPENTER, KEY_UP, KEY_LEFT,
-+	/* row 2 */
-+	KEY_PAGEDOWN, KEY_CAMERA, KEY_RECORD, KEY_HOME, KEY_PAGEUP,
-+	/* row 3 */
-+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-+	/* row 4 */
-+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
-+	/* row 5 */
-+	KEY_RESERVED, KEY_RESERVED, KEY_MENU, KEY_RESERVED, KEY_RESERVED,
-+};
-+/*
-+static unsigned char a1200_direct_keycode[] = {
-+	KEY_CAMERA,
-+};
-+*/
-+
-+static int a1200_kbd_init(void)
-+{
-+	pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN); /* KP_MKIN<0> */
-+	pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN); /* KP_MKIN<1> */
-+	pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN); /* KP_MKIN<2> */
-+	pxa_gpio_mode(97  | GPIO_ALT_FN_3_IN); /* KP_MKIN<3> */
-+	pxa_gpio_mode(98  | GPIO_ALT_FN_3_IN); /* KP_MKIN<4> */
-+	pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
-+	pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
-+	pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
-+	pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
-+	pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<4> */
-+	pxa_gpio_mode(108 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<5> */
-+
-+	PKWR   = 0xEC000;
-+	PGSR3 |= 0x1F80;
-+	return 0;
-+}
-+
-+static struct pxakbd_platform_data a1200_kbd_platform_data = {
-+	.init           = &a1200_kbd_init,
-+	.scan_interval  = HZ/40,
-+	.matrix         = {
-+		.keycode = a1200_keycode,
-+		.cols   = 6,
-+		.rows   = 5,
-+	},
-+/*
-+	.direct         = {
-+		.keycode = a1200_direct_keycode,
-+		.num    = 1,
-+	},
-+*/
-+};
-+
-+
- static struct platform_device *devices[] __initdata = {
- 	&a1200_pcap_device,
- 	&a1200_eoc_device,
-@@ -218,6 +278,7 @@
- {
- 	set_pxa_fb_info(&a1200_fb_info);
- 	pxa_set_mci_info(&a1200_mci_platform_data);
-+	pxa_set_kbd_info(&a1200_kbd_platform_data);
- 
- 	platform_add_devices(devices, ARRAY_SIZE(devices));
- }
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch
deleted file mode 100755
index 042254b115..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a1200-mci.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-07 11:51:55.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-07 11:54:52.000000000 -0300
-@@ -13,6 +13,8 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/fb.h>
-+#include <linux/mmc/host.h>
-+#include <linux/irq.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -20,12 +22,102 @@
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/mmc.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
- 
-+#ifdef CONFIG_EZX_PCAP
-+extern int ezx_pcap_mmcsd_power(int);
-+extern void ezx_pcap_mmcsd_voltage(u_int32_t);
-+#else
-+#define ezx_pcap_mmcsd_voltage(x) {}
-+#define ezx_pcap_mmcsd_power(x) {}
-+#endif
-+
-+static struct pxamci_platform_data a1200_mci_platform_data;
-+
-+static u_int8_t mmc_voltage[] = {
-+	[MMC_VDD_160] = 5,
-+	[MMC_VDD_170] = 5,
-+	[MMC_VDD_180] = 6,
-+	[MMC_VDD_190] = 6,
-+	[MMC_VDD_200] = 7,
-+	[MMC_VDD_210] = 7,
-+	[MMC_VDD_220] = 8,
-+	[MMC_VDD_230] = 8,
-+	[MMC_VDD_240] = 9,
-+	[MMC_VDD_250] = 9,
-+	[MMC_VDD_260] = 10,
-+	[MMC_VDD_270] = 10,
-+	[MMC_VDD_280] = 11,
-+	[MMC_VDD_290] = 11,
-+	[MMC_VDD_300] = 12,
-+	[MMC_VDD_310] = 12,
-+	[MMC_VDD_320] = 13,
-+	[MMC_VDD_330] = 13,
-+	[MMC_VDD_340] = 14,
-+	[MMC_VDD_350] = 14,
-+	[MMC_VDD_360] = 15,
-+};
-+
-+static int a1200_mci_init(struct device *dev,
-+                       irqreturn_t (*ezx_detect_int)(int, void *),
-+                       void *data)
-+{
-+       int err;
-+
-+       /* Setup GPIO for PXA27x MMC/SD controller */
-+       pxa_gpio_mode(GPIO32_MMCCLK_MD);
-+       pxa_gpio_mode(GPIO112_MMCCMD_MD);
-+       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-+       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-+       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-+       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-+
-+       ezx_pcap_mmcsd_power(1);
-+
-+       a1200_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-+
-+       err = request_irq(0x49, ezx_detect_int, SA_INTERRUPT,
-+                       "MMC card detect", data);
-+       if (err) {
-+               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
-+                       "MMC card detect IRQ\n");
-+               return -1;
-+       }
-+
-+       set_irq_type(0x0b, IRQT_BOTHEDGE);
-+
-+       return 0;
-+}
-+
-+static void a1200_mci_setpower(struct device *dev, unsigned int vdd)
-+{
-+	if (vdd <= MMC_VDD_360)
-+		ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
-+
-+	ezx_pcap_mmcsd_power(1);
-+}
-+
-+static void a1200_mci_exit(struct device *dev, void *data)
-+{
-+	ezx_pcap_mmcsd_power(0);
-+	free_irq(0x49, data);
-+}
-+
-+static struct pxamci_platform_data a1200_mci_platform_data = {
-+	.ocr_mask       = MMC_VDD_160_165|MMC_VDD_18_19|MMC_VDD_20_21
-+			  |MMC_VDD_22_23|MMC_VDD_24_25|MMC_VDD_26_27
-+			  |MMC_VDD_28_29|MMC_VDD_30_31|MMC_VDD_32_33
-+			  |MMC_VDD_34_35|MMC_VDD_35_36,
-+	.init           = a1200_mci_init,
-+	.setpower       = a1200_mci_setpower,
-+	.exit           = a1200_mci_exit,
-+};
-+
- static struct pxafb_mode_info mode_a1200 = {
-        .pixclock = 192308,
-        .xres = 240,
-@@ -118,6 +210,7 @@
- static void __init a1200_init(void)
- {
- 	set_pxa_fb_info(&a1200_fb_info);
-+	pxa_set_mci_info(&a1200_mci_platform_data);
- 
- 	platform_add_devices(devices, ARRAY_SIZE(devices));
- }
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch
deleted file mode 100644
index 8aa1e46d73..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a1200-pcap.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-07 11:32:32.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-07 11:51:55.000000000 -0300
-@@ -19,6 +19,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
-+#include <asm/arch/ezx-pcap.h>
- 
- #include "generic.h"
- 
-@@ -48,7 +49,70 @@
-        .pxafb_lcd_power = &ezx_lcd_power,
- };
- 
-+/* PCAP */
-+static int __init a1200_pcap_init(void)
-+{
-+	/*
-+	 * FIXME: this is the PCAP INITIAL STATE.
-+	 * most of these writes should NOT be done here
-+	 * * voltage regulators, voltage enablers should be set by the
-+	 *   driver which uses the connected hardware. Otherwise you
-+	 *   drain power unnecessarily.
-+	 * * interrupt related registers should be set by the irq functions
-+	 *   only. I think that the INT_SEL register selects on which irq
-+	 *   pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but
-+	 *   only if it actually makes any difference.
-+	 * * Only power state automatic changes should be done here.
-+	 *   (*LOWPWR, *STBY, LOWPWR*)
-+	 * * I removed some writes which i consider extremelly wrong. And
-+	 *   which i think will not break anything (they were overwritten
-+	 *   later anyway).
-+	 *
-+	 *   --WM
-+	 */
-+	ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */
-+	ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */
-+	ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */
-+	ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c);
-+	ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */
-+
-+	return 0;
-+}
-+
-+static struct pcap_platform_data a1200_pcap_platform_data = {
-+	.port		= 1,
-+	.cs		= GPIO_SPI_CE,
-+	.flags		= PCAP_CS_AH | PCAP_MCI_TF,
-+	.clk		= 1,
-+	.init		= a1200_pcap_init,
-+};
-+
-+static struct resource a1200_pcap_resources[] = {
-+	[0] = {
-+		.start		= IRQ_GPIO1,
-+		.end		= IRQ_GPIO1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device a1200_pcap_device = {
-+	.name		= "ezx-pcap",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(a1200_pcap_resources),
-+	.resource	= a1200_pcap_resources,
-+	.dev		= {
-+		.platform_data = &a1200_pcap_platform_data,
-+	},
-+};
-+
- static struct platform_device *devices[] __initdata = {
-+	&a1200_pcap_device,
- };
- 
- static void __init a1200_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch
deleted file mode 100755
index bf328cd931..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a1200-ts.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-09-25 02:00:40.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-25 02:00:53.000000000 -0300
-@@ -269,9 +269,34 @@
- };
- 
- 
-+/* PCAP_TS */
-+struct resource pcap_ts_resources[] = {
-+	[0] = {
-+		.start          = EZX_IRQ_ADCDONE,
-+		.end            = EZX_IRQ_ADCDONE,
-+		.flags          = IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start          = EZX_IRQ_TS,
-+		.end            = EZX_IRQ_TS,
-+		.flags          = IORESOURCE_IRQ,
-+	}
-+};
-+
-+struct platform_device pcap_ts_device = {
-+	.name           = "pcap-ts",
-+	.id             = -1,
-+	.dev		= {
-+		.parent = &a1200_pcap_device.dev,
-+	},
-+	.num_resources  = ARRAY_SIZE(pcap_ts_resources),
-+	.resource       = pcap_ts_resources,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&a1200_pcap_device,
- 	&a1200_eoc_device,
-+	&pcap_ts_device,
- };
- 
- static void __init a1200_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch
deleted file mode 100644
index f6121c6e7f..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-emu.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:02:13.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:03:16.000000000 -0300
-@@ -211,8 +211,33 @@
- 	},
- };
- 
-+/* EMU */
-+static struct resource a780_emu_resources[] = {
-+	[0] = {
-+		.start		= EZX_IRQ_USB4V,
-+		.end		= EZX_IRQ_USB4V,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start		= EZX_IRQ_USB1V,
-+		.end		= EZX_IRQ_USB1V,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device a780_emu_device = {
-+	.name		= "ezx-emu",
-+	.id		= -1,
-+	.dev		= {
-+		.parent		= &a780_pcap_device.dev,
-+	},
-+	.num_resources	= ARRAY_SIZE(a780_emu_resources),
-+	.resource	= a780_emu_resources,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&a780_pcap_device,
-+	&a780_emu_device,
- };
- 
- static void __init a780_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch
deleted file mode 100755
index 88f15041db..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-flip.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:58:17.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:59:03.000000000 -0300
-@@ -17,6 +17,7 @@
- #include <linux/mmc/host.h>
- #include <linux/irq.h>
- #include <linux/input.h>
-+#include <linux/gpio_keys.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -311,10 +312,33 @@
- 	.resource       = pcap_ts_resources,
- };
- 
-+static struct gpio_keys_button a780flip_buttons[] = {
-+       [0] = {
-+               .keycode        = KEY_SLEEP,
-+               .gpio           = GPIO_FLIP_PIN,
-+               .desc           = "A780 flip",
-+       },
-+};
-+
-+static struct gpio_keys_platform_data a780flip_platform_data = {
-+       .buttons        = a780flip_buttons,
-+       .nbuttons       = 1,
-+};
-+
-+static struct platform_device a780flip_device = {
-+       .name           = "gpio-keys",
-+       .id             = -1,
-+       .dev            = {
-+               .platform_data  = &a780flip_platform_data,
-+       },
-+};
-+
-+
- static struct platform_device *devices[] __initdata = {
- 	&a780_pcap_device,
- 	&a780_emu_device,
- 	&pcap_ts_device,
-+	&a780flip_device,
- };
- 
- static void __init a780_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch
deleted file mode 100755
index d7d114cfed..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-kbd.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:03:16.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:05:18.000000000 -0300
-@@ -16,6 +16,7 @@
- #include <linux/fb.h>
- #include <linux/mmc/host.h>
- #include <linux/irq.h>
-+#include <linux/input.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -24,11 +25,13 @@
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
- #include <asm/arch/mmc.h>
-+#include <asm/arch/kbd.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
-+extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *);
- 
- #ifdef CONFIG_EZX_PCAP
- extern int ezx_pcap_mmcsd_power(int);
-@@ -235,6 +238,55 @@
- 	.resource	= a780_emu_resources,
- };
- 
-+static unsigned char a780_keycode[] = {
-+       /* row 0 */
-+       KEY_PHONE, KEY_MENU, KEY_CANCEL, KEY_PAGEUP, KEY_UP,
-+       /* row 1 */
-+       KEY_KP1, KEY_KP2, KEY_KP3, KEY_ENTER, KEY_KPENTER, /*center joypad */
-+       /* row 2 */
-+       KEY_KP4, KEY_KP5, KEY_KP6, KEY_RECORD, KEY_LEFT,
-+       /* row 3 */
-+       KEY_KP7, KEY_KP8, KEY_KP9, KEY_HOME, KEY_RIGHT,
-+       /* row 4 */
-+       KEY_KPASTERISK, KEY_KP0, KEY_KPDOT, KEY_PAGEDOWN, KEY_DOWN,
-+};
-+
-+static unsigned char a780_direct_keycode[] = {
-+       KEY_CAMERA,
-+};
-+
-+static int a780_kbd_init(void)
-+{
-+       pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);   /* KP_DKIN<0>, voice_rec */
-+       pxa_gpio_mode(97 | GPIO_ALT_FN_3_IN);   /* KP_MKIN<3> */
-+       pxa_gpio_mode(98 | GPIO_ALT_FN_3_IN);   /* KP_MKIN<4> */
-+       pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<0> */
-+       pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<1> */
-+       pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<2> */
-+       pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
-+       pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
-+       pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
-+       pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
-+       pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<4> */
-+       PKWR = 0xec400;
-+       PGSR3 |= 0xf80;
-+       return 0;
-+}
-+
-+static struct pxakbd_platform_data a780_kbd_platform_data = {
-+       .init           = &a780_kbd_init,
-+       .scan_interval  = HZ/40,
-+       .matrix         = {
-+               .keycode = a780_keycode,
-+               .cols   = 5,
-+               .rows   = 5,
-+       },
-+       .direct         = {
-+               .keycode = a780_direct_keycode,
-+               .num    = 1,
-+       },
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&a780_pcap_device,
- 	&a780_emu_device,
-@@ -255,6 +307,7 @@
- 
- 	set_pxa_fb_info(&a780_fb_info);
- 	pxa_set_mci_info(&a780_mci_platform_data);
-+	pxa_set_kbd_info(&a780_kbd_platform_data);
- 
-         /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
- 	pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch
deleted file mode 100755
index e8336d8855..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-leds.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
-Index: linux-2.6.21/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/leds/Kconfig	2007-08-31 22:27:41.000000000 -0300
-+++ linux-2.6.21/drivers/leds/Kconfig	2007-08-31 23:59:27.000000000 -0300
-@@ -104,6 +104,13 @@
- 	  These triggers allow kernel events to drive the LEDs and can
- 	  be configured via sysfs. If unsure, say Y.
- 
-+config LEDS_A780
-+	tristate "LED Support for the Motorola A780 GSM Phone"
-+	depends LEDS_CLASS && PXA_EZX_A780
-+	help
-+	  This option enables support for the LEDs on the
-+	  Motorola A780 GSM Phone.
-+
- config LEDS_TRIGGER_TIMER
- 	tristate "LED Timer Trigger"
- 	depends on LEDS_TRIGGERS
-Index: linux-2.6.21/drivers/leds/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/leds/Makefile	2007-08-31 22:27:41.000000000 -0300
-+++ linux-2.6.21/drivers/leds/Makefile	2007-08-31 23:59:27.000000000 -0300
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_A780)		+= leds-a780.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-Index: linux-2.6.21/drivers/leds/leds-a780.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/leds/leds-a780.c	2007-08-31 23:59:27.000000000 -0300
-@@ -0,0 +1,122 @@
-+/*
-+ * EZX Platform LED Driver for the Motorola A780 GSM Phone
-+ *
-+ * Copyright 2006 Vanille-Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * Based on keylight.c by Motorola and leds-corgi.c by Richard Purdie
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/arch/ezx-pcap.h>
-+
-+static void a780led_main_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	if ( value > 31 ) value = 31;
-+	printk( KERN_DEBUG "a780led_main_set: %d\n", value );
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL0, value & 0x01);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL1, value & 0x02);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL2, value & 0x04);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL3, value & 0x08);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL4, value & 0x10);
-+}
-+
-+static void a780led_aux_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	if ( value > 31 ) value = 31;
-+	printk( KERN_DEBUG "a780led_aux_set: %d\n", value );
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL0, value & 0x01);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL1, value & 0x02);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL2, value & 0x04);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL3, value & 0x08);
-+	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10);
-+}
-+
-+static struct led_classdev a780_main_led = {
-+	.name			= "a780:main",
-+	.default_trigger	= "none",
-+	.brightness_set		= a780led_main_set,
-+};
-+
-+static struct led_classdev a780_aux_led = {
-+	.name			= "a780:aux",
-+	.default_trigger	= "none",
-+	.brightness_set		= a780led_aux_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int a780led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	led_classdev_suspend(&a780_main_led);
-+	led_classdev_suspend(&a780_aux_led);
-+	return 0;
-+}
-+
-+static int a780led_resume(struct platform_device *dev)
-+{
-+	led_classdev_resume(&a780_main_led);
-+	led_classdev_resume(&a780_aux_led);
-+	return 0;
-+}
-+#endif
-+
-+static int a780led_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &a780_main_led);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &a780_aux_led);
-+	if (ret < 0)
-+		led_classdev_unregister(&a780_main_led);
-+
-+	return ret;
-+}
-+
-+static int a780led_remove(struct platform_device *pdev)
-+{
-+	led_classdev_unregister(&a780_main_led);
-+	led_classdev_unregister(&a780_aux_led);
-+	return 0;
-+}
-+
-+static struct platform_driver a780led_driver = {
-+	.probe		= a780led_probe,
-+	.remove		= a780led_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= a780led_suspend,
-+	.resume		= a780led_resume,
-+#endif
-+	.driver		= {
-+		.name		= "a780-led",
-+	},
-+};
-+
-+static int __init a780led_init(void)
-+{
-+	return platform_driver_register(&a780led_driver);
-+}
-+
-+static void __exit a780led_exit(void)
-+{
-+	a780led_main_set( &a780_main_led, 0 );
-+	a780led_aux_set( &a780_aux_led, 0 );
-+	platform_driver_unregister(&a780led_driver);
-+}
-+
-+module_init(a780led_init);
-+module_exit(a780led_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Motorola A780 LED driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:59:03.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:59:27.000000000 -0300
-@@ -333,12 +333,20 @@
-        },
- };
- 
-+static struct platform_device a780led_device = {
-+	.name		= "a780-led",
-+	.id		= -1,
-+	.dev		= {
-+		.parent = &a780_pcap_device.dev,
-+	},
-+};
- 
- static struct platform_device *devices[] __initdata = {
- 	&a780_pcap_device,
- 	&a780_emu_device,
- 	&pcap_ts_device,
- 	&a780flip_device,
-+	&a780led_device,
- };
- 
- static void __init a780_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch
deleted file mode 100755
index 1238c1cf71..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-mci.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:01:54.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:02:13.000000000 -0300
-@@ -14,6 +14,8 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/fb.h>
-+#include <linux/mmc/host.h>
-+#include <linux/irq.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -21,12 +23,102 @@
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/mmc.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
- 
-+#ifdef CONFIG_EZX_PCAP
-+extern int ezx_pcap_mmcsd_power(int);
-+extern void ezx_pcap_mmcsd_voltage(u_int32_t);
-+#else
-+#define ezx_pcap_mmcsd_voltage(x) {}
-+#define ezx_pcap_mmcsd_power(x) {}
-+#endif
-+
-+static struct pxamci_platform_data a780_mci_platform_data;
-+
-+static u_int8_t mmc_voltage[] = {
-+	[MMC_VDD_160] = 5,
-+	[MMC_VDD_170] = 5,
-+	[MMC_VDD_180] = 6,
-+	[MMC_VDD_190] = 6,
-+	[MMC_VDD_200] = 7,
-+	[MMC_VDD_210] = 7,
-+	[MMC_VDD_220] = 8,
-+	[MMC_VDD_230] = 8,
-+	[MMC_VDD_240] = 9,
-+	[MMC_VDD_250] = 9,
-+	[MMC_VDD_260] = 10,
-+	[MMC_VDD_270] = 10,
-+	[MMC_VDD_280] = 11,
-+	[MMC_VDD_290] = 11,
-+	[MMC_VDD_300] = 12,
-+	[MMC_VDD_310] = 12,
-+	[MMC_VDD_320] = 13,
-+	[MMC_VDD_330] = 13,
-+	[MMC_VDD_340] = 14,
-+	[MMC_VDD_350] = 14,
-+	[MMC_VDD_360] = 15,
-+};
-+
-+static int a780_mci_init(struct device *dev,
-+                       irqreturn_t (*ezx_detect_int)(int, void *),
-+                       void *data)
-+{
-+       int err;
-+
-+       /* Setup GPIO for PXA27x MMC/SD controller */
-+       pxa_gpio_mode(GPIO32_MMCCLK_MD);
-+       pxa_gpio_mode(GPIO112_MMCCMD_MD);
-+       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-+       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-+       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-+       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-+
-+       ezx_pcap_mmcsd_power(1);
-+
-+       a780_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-+
-+       err = request_irq(0x49, ezx_detect_int, SA_INTERRUPT,
-+                       "MMC card detect", data);
-+       if (err) {
-+               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
-+                       "MMC card detect IRQ\n");
-+               return -1;
-+       }
-+
-+       set_irq_type(0x0b, IRQT_BOTHEDGE);
-+
-+       return 0;
-+}
-+
-+static void a780_mci_setpower(struct device *dev, unsigned int vdd)
-+{
-+	if (vdd <= MMC_VDD_360)
-+		ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
-+
-+	ezx_pcap_mmcsd_power(1);
-+}
-+
-+static void a780_mci_exit(struct device *dev, void *data)
-+{
-+	ezx_pcap_mmcsd_power(0);
-+	free_irq(0x49, data);
-+}
-+
-+static struct pxamci_platform_data a780_mci_platform_data = {
-+	.ocr_mask       = MMC_VDD_160_165|MMC_VDD_18_19|MMC_VDD_20_21
-+			  |MMC_VDD_22_23|MMC_VDD_24_25|MMC_VDD_26_27
-+			  |MMC_VDD_28_29|MMC_VDD_30_31|MMC_VDD_32_33
-+			  |MMC_VDD_34_35|MMC_VDD_35_36,
-+	.init           = a780_mci_init,
-+	.setpower       = a780_mci_setpower,
-+	.exit           = a780_mci_exit,
-+};
-+
- static struct pxafb_mode_info mode_a780 = {
- 	.pixclock	= 150000,
- 	.xres		= 240,
-@@ -137,6 +229,7 @@
- 	PSLR  = 0x05800f00;
- 
- 	set_pxa_fb_info(&a780_fb_info);
-+	pxa_set_mci_info(&a780_mci_platform_data);
- 
-         /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
- 	pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch
deleted file mode 100644
index afb5d9c005..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-pcap.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 22:33:03.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:01:17.000000000 -0300
-@@ -20,6 +20,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
-+#include <asm/arch/ezx-pcap.h>
- 
- #include "generic.h"
- 
-@@ -49,7 +50,77 @@
- 	.pxafb_lcd_power = &ezx_lcd_power,
- };
- 
-+/* PCAP */
-+static int __init a780_pcap_init(void)
-+{
-+	/* initialize PCAP registers */
-+	/* set SW1 sleep to keep SW1 1.3v in sync mode */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0);
-+
-+	/*  SW1 active in sync mode */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0);
-+
-+	/*  at SW1 -core voltage to 1.30V   */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0);
-+
-+	/* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off  */
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0);
-+
-+	/*
-+	 * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 ---
-+	 * camera for e680
-+	 */
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0);
-+
-+	/* set Vc to low power mode when AP sleep */
-+//	SSP_PCAP_bit_set(PCAP_BIT_LOWPWR_CTRL_VC_STBY);
-+
-+	/* set VAUX2 to low power mode when AP sleep */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1);
-+
-+	return 0;
-+}
-+
-+static struct pcap_platform_data a780_pcap_platform_data = {
-+	.port		= 1,
-+	.cs		= GPIO_SPI_CE,
-+	.flags		= PCAP_MCI_TF,
-+	.clk		= 1,
-+	.init		= a780_pcap_init,
-+};
-+
-+static struct resource a780_pcap_resources[] = {
-+	[0] = {
-+		.start		= IRQ_GPIO1,
-+		.end		= IRQ_GPIO1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device a780_pcap_device = {
-+	.name		= "ezx-pcap",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(a780_pcap_resources),
-+	.resource	= a780_pcap_resources,
-+	.dev		= {
-+		.platform_data = &a780_pcap_platform_data,
-+	},
-+};
-+
- static struct platform_device *devices[] __initdata = {
-+	&a780_pcap_device,
- };
- 
- static void __init a780_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch
deleted file mode 100755
index e7ca3c106a..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-ts.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:05:18.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-08-31 23:06:53.000000000 -0300
-@@ -287,9 +287,34 @@
-        },
- };
- 
-+/* PCAP_TS */
-+struct resource pcap_ts_resources[] = {
-+	[0] = {
-+		.start          = EZX_IRQ_ADCDONE2,
-+		.end            = EZX_IRQ_ADCDONE2,
-+		.flags          = IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start          = EZX_IRQ_TS,
-+		.end            = EZX_IRQ_TS,
-+		.flags          = IORESOURCE_IRQ,
-+	}
-+};
-+
-+struct platform_device pcap_ts_device = {
-+	.name           = "pcap-ts",
-+	.id             = -1,
-+	.dev		= {
-+		.parent = &a780_pcap_device.dev,
-+	},
-+	.num_resources  = ARRAY_SIZE(pcap_ts_resources),
-+	.resource       = pcap_ts_resources,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&a780_pcap_device,
- 	&a780_emu_device,
-+	&pcap_ts_device,
- };
- 
- static void __init a780_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch b/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch
deleted file mode 100755
index aa903feea7..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/a780-vibrator.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-Index: linux-2.6.21/drivers/leds/leds-a780.c
-===================================================================
---- linux-2.6.21.orig/drivers/leds/leds-a780.c	2007-09-01 00:15:03.000000000 -0300
-+++ linux-2.6.21/drivers/leds/leds-a780.c	2007-09-01 00:23:39.000000000 -0300
-@@ -40,6 +40,17 @@
- 	ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10);
- }
- 
-+static void a780vibrator_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	if (value > 4) value = 4;
-+	printk( KERN_DEBUG "a780vibrator_set: %d\n", value );
-+	ezx_pcap_vibrator_level(value-1);
-+	if (value == 0)
-+		ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 0);
-+	else
-+		ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 1);
-+}
-+
- static struct led_classdev a780_main_led = {
- 	.name			= "a780:main",
- 	.default_trigger	= "none",
-@@ -52,11 +63,18 @@
- 	.brightness_set		= a780led_aux_set,
- };
- 
-+static struct led_classdev a780_vibrator = {
-+	.name			= "a780:vibrator",
-+	.default_trigger	= "none",
-+	.brightness_set		= a780vibrator_set,
-+};
-+
- #ifdef CONFIG_PM
- static int a780led_suspend(struct platform_device *dev, pm_message_t state)
- {
- 	led_classdev_suspend(&a780_main_led);
- 	led_classdev_suspend(&a780_aux_led);
-+	led_classdev_suspend(&a780_vibrator);
- 	return 0;
- }
- 
-@@ -64,6 +82,7 @@
- {
- 	led_classdev_resume(&a780_main_led);
- 	led_classdev_resume(&a780_aux_led);
-+	led_classdev_resume(&a780_vibrator);
- 	return 0;
- }
- #endif
-@@ -77,8 +96,16 @@
- 		return ret;
- 
- 	ret = led_classdev_register(&pdev->dev, &a780_aux_led);
--	if (ret < 0)
-+	if (ret < 0) {
-+		led_classdev_unregister(&a780_main_led);
-+		return ret;
-+	}
-+
-+	ret = led_classdev_register(&pdev->dev, &a780_vibrator);
-+	if (ret < 0) {
- 		led_classdev_unregister(&a780_main_led);
-+		led_classdev_unregister(&a780_aux_led);
-+	}
- 
- 	return ret;
- }
-@@ -87,6 +114,7 @@
- {
- 	led_classdev_unregister(&a780_main_led);
- 	led_classdev_unregister(&a780_aux_led);
-+	led_classdev_unregister(&a780_vibrator);
- 	return 0;
- }
- 
-@@ -111,6 +139,7 @@
- {
- 	a780led_main_set( &a780_main_led, 0 );
- 	a780led_aux_set( &a780_aux_led, 0 );
-+	a780vibrator_set( &a780_vibrator, 0 );
- 	platform_driver_unregister(&a780led_driver);
- }
- 
-Index: linux-2.6.21/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/leds/Kconfig	2007-09-01 00:15:03.000000000 -0300
-+++ linux-2.6.21/drivers/leds/Kconfig	2007-09-01 00:15:08.000000000 -0300
-@@ -105,11 +105,11 @@
- 	  be configured via sysfs. If unsure, say Y.
- 
- config LEDS_A780
--	tristate "LED Support for the Motorola A780 GSM Phone"
-+	tristate "LED/Vibrator Support for the Motorola A780 GSM Phone"
- 	depends LEDS_CLASS && PXA_EZX_A780
- 	help
--	  This option enables support for the LEDs on the
--	  Motorola A780 GSM Phone.
-+	  This option enables support for the LEDs and the
-+	  vibrator on the Motorola A780 GSM Phone.
- 
- config LEDS_E680
- 	tristate "LED Support for the Motorola E680(i) GSM Phone"
diff --git a/packages/linux/linux-ezx-2.6.21/patches/asoc-fix-loopback.patch b/packages/linux/linux-ezx-2.6.21/patches/asoc-fix-loopback.patch
deleted file mode 100644
index feea138984..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/asoc-fix-loopback.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c
-===================================================================
---- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-pcm.c	2007-09-02 22:30:56.000000000 -0300
-+++ linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c	2007-09-02 22:36:26.000000000 -0300
-@@ -153,7 +153,8 @@
- static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream)
- {
- 	struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
--
-+	/* no dma if on loopback */
-+	if (!prtd->params) return 0;
- 	DCSR(prtd->dma_ch) &= ~DCSR_RUN;
- 	DCSR(prtd->dma_ch) = 0;
- 	DCMD(prtd->dma_ch) = 0;
diff --git a/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch b/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch
deleted file mode 100755
index dd5b71a512..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/asoc-pxa-ssp.patch
+++ /dev/null
@@ -1,755 +0,0 @@
-Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.c	2007-09-02 22:50:31.000000000 -0300
-@@ -0,0 +1,671 @@
-+/*
-+ * pxa2xx-ssp.c  --  ALSA Soc Audio Layer
-+ *
-+ * Copyright 2005 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  Revision history
-+ *    12th Aug 2005   Initial version.
-+ *
-+ * TODO:
-+ *  o The SSP driver _mostly_ works, however is in need of testing and
-+ *     someone with time to complete it.
-+ *  o Test network mode for > 16bit sample size
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/initval.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/audio.h>
-+#include <asm/arch/ssp.h>
-+
-+#include "pxa2xx-pcm.h"
-+#include "pxa2xx-ssp.h"
-+
-+#define PXA_SSP_DEBUG 0
-+
-+/*
-+ * The following should be defined in pxa-regs.h
-+ */
-+#define SSCR0_ACS		(1 << 30)	/* Audio Clock Select */
-+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass (SSCR0[ACS] must be set) */
-+#define SSACD_ACPS(x)	(x << 4)	/* Audio clock PLL select */
-+#define SSACD_ACDS(x)	(x << 0)	/* Audio clock divider select */
-+
-+/*
-+ * SSP audio private data
-+ */
-+struct ssp_priv {
-+	unsigned int sysclk;
-+};
-+
-+static struct ssp_priv ssp_clk[3];
-+static struct ssp_dev ssp[3];
-+#ifdef CONFIG_PM
-+static struct ssp_state ssp_state[3];
-+#endif
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_mono_out = {
-+	.name			= "SSP1 PCM Mono out",
-+	.dev_addr		= __PREG(SSDR_P1),
-+	.drcmr			= &DRCMRTXSSDR,
-+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-+				  DCMD_BURST16 | DCMD_WIDTH2,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_mono_in = {
-+	.name			= "SSP1 PCM Mono in",
-+	.dev_addr		= __PREG(SSDR_P1),
-+	.drcmr			= &DRCMRRXSSDR,
-+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-+				  DCMD_BURST16 | DCMD_WIDTH2,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_stereo_out = {
-+	.name			= "SSP1 PCM Stereo out",
-+	.dev_addr		= __PREG(SSDR_P1),
-+	.drcmr			= &DRCMRTXSSDR,
-+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-+				  DCMD_BURST16 | DCMD_WIDTH4,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_stereo_in = {
-+	.name			= "SSP1 PCM Stereo in",
-+	.dev_addr		= __PREG(SSDR_P1),
-+	.drcmr			= &DRCMRRXSSDR,
-+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-+				  DCMD_BURST16 | DCMD_WIDTH4,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_mono_out = {
-+	.name			= "SSP2 PCM Mono out",
-+	.dev_addr		= __PREG(SSDR_P2),
-+	.drcmr			= &DRCMRTXSS2DR,
-+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-+				  DCMD_BURST16 | DCMD_WIDTH2,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_mono_in = {
-+	.name			= "SSP2 PCM Mono in",
-+	.dev_addr		= __PREG(SSDR_P2),
-+	.drcmr			= &DRCMRRXSS2DR,
-+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-+				  DCMD_BURST16 | DCMD_WIDTH2,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_stereo_out = {
-+	.name			= "SSP2 PCM Stereo out",
-+	.dev_addr		= __PREG(SSDR_P2),
-+	.drcmr			= &DRCMRTXSS2DR,
-+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-+				  DCMD_BURST16 | DCMD_WIDTH4,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_stereo_in = {
-+	.name			= "SSP2 PCM Stereo in",
-+	.dev_addr		= __PREG(SSDR_P2),
-+	.drcmr			= &DRCMRRXSS2DR,
-+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-+				  DCMD_BURST16 | DCMD_WIDTH4,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_mono_out = {
-+	.name			= "SSP3 PCM Mono out",
-+	.dev_addr		= __PREG(SSDR_P3),
-+	.drcmr			= &DRCMRTXSS3DR,
-+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-+				  DCMD_BURST16 | DCMD_WIDTH2,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_mono_in = {
-+	.name			= "SSP3 PCM Mono in",
-+	.dev_addr		= __PREG(SSDR_P3),
-+	.drcmr			= &DRCMRRXSS3DR,
-+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-+				  DCMD_BURST16 | DCMD_WIDTH2,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_stereo_out = {
-+	.name			= "SSP3 PCM Stereo out",
-+	.dev_addr		= __PREG(SSDR_P3),
-+	.drcmr			= &DRCMRTXSS3DR,
-+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-+				  DCMD_BURST16 | DCMD_WIDTH4,
-+};
-+
-+static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_stereo_in = {
-+	.name			= "SSP3 PCM Stereo in",
-+	.dev_addr		= __PREG(SSDR_P3),
-+	.drcmr			= &DRCMRRXSS3DR,
-+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-+				  DCMD_BURST16 | DCMD_WIDTH4,
-+};
-+
-+static struct pxa2xx_pcm_dma_params *ssp_dma_params[3][4] = {
-+	{&pxa2xx_ssp1_pcm_mono_out, &pxa2xx_ssp1_pcm_mono_in,
-+	&pxa2xx_ssp1_pcm_stereo_out,&pxa2xx_ssp1_pcm_stereo_in,},
-+	{&pxa2xx_ssp2_pcm_mono_out, &pxa2xx_ssp2_pcm_mono_in,
-+	&pxa2xx_ssp2_pcm_stereo_out, &pxa2xx_ssp2_pcm_stereo_in,},
-+	{&pxa2xx_ssp3_pcm_mono_out, &pxa2xx_ssp3_pcm_mono_in,
-+	&pxa2xx_ssp3_pcm_stereo_out,&pxa2xx_ssp3_pcm_stereo_in,},
-+};
-+
-+static int pxa2xx_ssp_startup(struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+	int ret = 0;
-+
-+	if (!rtd->dai->cpu_dai->active) {
-+		ret = ssp_init (&ssp[cpu_dai->id], cpu_dai->id + 1,
-+			SSP_NO_IRQ);
-+		if (ret < 0)
-+			return ret;
-+		ssp_disable(&ssp[cpu_dai->id]);
-+	}
-+	return ret;
-+}
-+
-+static void pxa2xx_ssp_shutdown(struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+
-+	if (!cpu_dai->active) {
-+		ssp_disable(&ssp[cpu_dai->id]);
-+		ssp_exit(&ssp[cpu_dai->id]);
-+	}
-+}
-+
-+#if defined (CONFIG_PXA27x)
-+static int cken[3] = {CKEN23_SSP1, CKEN3_SSP2, CKEN4_SSP3};
-+#else
-+static int cken[3] = {CKEN3_SSP, CKEN9_NSSP, CKEN10_ASSP};
-+#endif
-+
-+#ifdef CONFIG_PM
-+
-+static int pxa2xx_ssp_suspend(struct platform_device *pdev,
-+	struct snd_soc_cpu_dai *dai)
-+{
-+	if (!dai->active)
-+		return 0;
-+
-+	ssp_save_state(&ssp[dai->id], &ssp_state[dai->id]);
-+	pxa_set_cken(cken[dai->id], 0);
-+	return 0;
-+}
-+
-+static int pxa2xx_ssp_resume(struct platform_device *pdev,
-+	struct snd_soc_cpu_dai *dai)
-+{
-+	if (!dai->active)
-+		return 0;
-+
-+	pxa_set_cken(cken[dai->id], 1);
-+	ssp_restore_state(&ssp[dai->id], &ssp_state[dai->id]);
-+	ssp_enable(&ssp[dai->id]);
-+
-+	return 0;
-+}
-+
-+#else
-+#define pxa2xx_ssp_suspend	NULL
-+#define pxa2xx_ssp_resume	NULL
-+#endif
-+
-+/*
-+ * Set the SSP ports SYSCLK.
-+ */
-+static int pxa2xx_ssp_set_dai_sysclk(struct snd_soc_cpu_dai *cpu_dai,
-+	int clk_id, unsigned int freq, int dir)
-+{
-+	int port = cpu_dai->id + 1;
-+	u32 sscr0 = SSCR0_P(port) &
-+		~(SSCR0_ECS |  SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
-+
-+	switch (clk_id) {
-+	case PXA2XX_SSP_CLK_PLL:
-+		/* Internal PLL is fixed on pxa25x and pxa27x */
-+#ifdef CONFIG_PXA27x
-+		ssp_clk[cpu_dai->id].sysclk = 13000000;
-+#else
-+		ssp_clk[cpu_dai->id].sysclk = 1843200;
-+#endif
-+		break;
-+	case PXA2XX_SSP_CLK_EXT:
-+		ssp_clk[cpu_dai->id].sysclk = freq;
-+		sscr0 |= SSCR0_ECS;
-+		break;
-+	case PXA2XX_SSP_CLK_NET:
-+		ssp_clk[cpu_dai->id].sysclk = freq;
-+		sscr0 |= SSCR0_NCS | SSCR0_MOD;
-+		break;
-+	case PXA2XX_SSP_CLK_AUDIO:
-+		ssp_clk[cpu_dai->id].sysclk = 0;
-+		SSCR0_P(port) |= SSCR0_SerClkDiv(1);
-+		sscr0 |= SSCR0_ACS;
-+		break;
-+	default:
-+		return -ENODEV;
-+	}
-+
-+	/* the SSP CKEN clock must be disabled when changing SSP clock mode */
-+	pxa_set_cken(cken[cpu_dai->id], 0);
-+	SSCR0_P(port) |= sscr0;
-+	pxa_set_cken(cken[cpu_dai->id], 1);
-+	return 0;
-+}
-+
-+/*
-+ * Set the SSP clock dividers.
-+ */
-+static int pxa2xx_ssp_set_dai_clkdiv(struct snd_soc_cpu_dai *cpu_dai,
-+	int div_id, int div)
-+{
-+	int port = cpu_dai->id + 1;
-+
-+	switch (div_id) {
-+	case PXA2XX_SSP_AUDIO_DIV_ACDS:
-+		SSACD_P(port) &= ~ 0x7;
-+		SSACD_P(port) |= SSACD_ACDS(div);
-+		break;
-+	case PXA2XX_SSP_AUDIO_DIV_SCDB:
-+		SSACD_P(port) &= ~0x8;
-+		if (div == PXA2XX_SSP_CLK_SCDB_1)
-+			SSACD_P(port) |= SSACD_SCDB;
-+		break;
-+	case PXA2XX_SSP_DIV_SCR:
-+		SSCR0_P(port) &= ~SSCR0_SCR;
-+		SSCR0_P(port) |= SSCR0_SerClkDiv(div);
-+		break;
-+	default:
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
-+ */
-+static int pxa2xx_ssp_set_dai_pll(struct snd_soc_cpu_dai *cpu_dai,
-+	int pll_id, unsigned int freq_in, unsigned int freq_out)
-+{
-+	int port = cpu_dai->id + 1;
-+
-+	SSACD_P(port) &= ~0x70;
-+	switch (freq_out) {
-+	case 5622000:
-+		break;
-+	case 11345000:
-+		SSACD_P(port) |= (0x1 << 4);
-+		break;
-+	case 12235000:
-+		SSACD_P(port) |= (0x2 << 4);
-+		break;
-+	case 14857000:
-+		SSACD_P(port) |= (0x3 << 4);
-+		break;
-+	case 32842000:
-+		SSACD_P(port) |= (0x4 << 4);
-+		break;
-+	case 48000000:
-+		SSACD_P(port) |= (0x5 << 4);
-+		break;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Set the active slots in TDM/Network mode
-+ */
-+static int pxa2xx_ssp_set_dai_tdm_slot(struct snd_soc_cpu_dai *cpu_dai,
-+	unsigned int mask, int slots)
-+{
-+	int port = cpu_dai->id + 1;
-+
-+	SSCR0_P(port) &= ~SSCR0_SlotsPerFrm(7);
-+
-+	/* set number of active slots */
-+	SSCR0_P(port) |= SSCR0_SlotsPerFrm(slots);
-+
-+	/* set active slot mask */
-+	SSTSA_P(port) = mask;
-+	SSRSA_P(port) = mask;
-+	return 0;
-+}
-+
-+/*
-+ * Tristate the SSP DAI lines
-+ */
-+static int pxa2xx_ssp_set_dai_tristate(struct snd_soc_cpu_dai *cpu_dai,
-+	int tristate)
-+{
-+	int port = cpu_dai->id + 1;
-+
-+	if (tristate)
-+		SSCR1_P(port) &= ~SSCR1_TTE;
-+	else
-+		SSCR1_P(port) |= SSCR1_TTE;
-+
-+	return 0;
-+}
-+
-+/*
-+ * Set up the SSP DAI format.
-+ * The SSP Port must be inactive before calling this function as the
-+ * physical interface format is changed.
-+ */
-+static int pxa2xx_ssp_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai,
-+		unsigned int fmt)
-+{
-+	int port = cpu_dai->id + 1;
-+
-+	/* reset port settings */
-+	SSCR0_P(port) = 0;
-+	SSCR1_P(port) = 0;
-+	SSPSP_P(port) = 0;
-+
-+	/* NOTE: I2S emulation is still very much work in progress here */
-+
-+	/* FIXME: this is what wince uses for msb */
-+	if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_MSB) {
-+		SSCR0_P(port) = SSCR0_EDSS | SSCR0_TISSP | SSCR0_DataSize(16);
-+
-+//		SSCR1_P(port) = SSCR1_RxTresh(8) | SSCR1_TxTresh(8); /* doesn't seem to be needed */
-+		return 0;
-+	}
-+
-+	/* check for I2S emulation mode - handle it separately  */
-+	if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) ||
-+		((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_MSB)) {
-+		/* 8.4.11 */
-+
-+		/* Only SSCR0[NCS] or SSCR0[ECS] bit fields settings are optional */
-+		SSCR0_P(port) = SSCR0_EDSS | SSCR0_PSP | SSCR0_DataSize(16);
-+
-+		/* SSCR1 = 0x203C3C03 */
-+		/* SSCR1[SCLKDIR] and SSCR1[SFRMDIR] must be cleared (master only ???),
-+		 * all other bit fields settings are optional. */
-+		//SSCR1_P(port) &= ~(SSCR1_SCLKDIR | SSCR1_SFRMDIR);
-+
-+		/* set FIFO thresholds */
-+		SSCR1_P(port) = SSCR1_RxTresh(14) | SSCR1_TxTresh(1);
-+
-+		/* normal: */
-+		/* all bit fields must be cleared except: FSRT = 1 and
-+		 * SFRMWDTH = 16, DMYSTART=0,1) */
-+		SSPSP_P(port) = SSPSP_FSRT | SSPSP_SFRMWDTH(16) | SSPSP_DMYSTRT(0);
-+		return 0;
-+	}
-+
-+	SSCR0_P(port) |= SSCR0_PSP;
-+	SSCR1_P(port) = SSCR1_RxTresh(14) | SSCR1_TxTresh(1) |
-+		SSCR1_TRAIL | SSCR1_RWOT;
-+
-+	switch(fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+	case SND_SOC_DAIFMT_CBM_CFM:
-+		SSCR1_P(port) |= (SSCR1_SCLKDIR | SSCR1_SFRMDIR);
-+		break;
-+	case SND_SOC_DAIFMT_CBM_CFS:
-+		SSCR1_P(port) |= SSCR1_SCLKDIR;
-+		break;
-+	case SND_SOC_DAIFMT_CBS_CFM:
-+		SSCR1_P(port) |= SSCR1_SFRMDIR;
-+		break;
-+	case SND_SOC_DAIFMT_CBS_CFS:
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+	case SND_SOC_DAIFMT_NB_NF:
-+		SSPSP_P(port) |= SSPSP_SFRMP | SSPSP_FSRT;
-+		break;
-+	case SND_SOC_DAIFMT_IB_IF:
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+	case SND_SOC_DAIFMT_DSP_A:
-+		SSPSP_P(port) |= SSPSP_DMYSTRT(1);
-+	case SND_SOC_DAIFMT_DSP_B:
-+		SSPSP_P(port) |= SSPSP_SCMODE(2);
-+		break;
-+	case SND_SOC_DAIFMT_I2S:
-+	case SND_SOC_DAIFMT_MSB:
-+		/* handled above */
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * Set the SSP audio DMA parameters and sample size.
-+ * Can be called multiple times by oss emulation.
-+ */
-+static int pxa2xx_ssp_hw_params(struct snd_pcm_substream *substream,
-+				struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+	int dma = 0, chn = params_channels(params);
-+	int port = cpu_dai->id + 1;
-+
-+	/* select correct DMA params */
-+	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
-+		dma = 1; /* capture DMA offset is 1,3 */
-+	if (chn == 2)
-+		dma += 2; /* stereo DMA offset is 2, mono is 0 */
-+	cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
-+
-+	/* we can only change the settings if the port is not in use */
-+	if (SSCR0_P(port) & SSCR0_SSE)
-+		return 0;
-+
-+	/* clear selected SSP bits */
-+	SSCR0_P(port) &= ~(SSCR0_DSS | SSCR0_EDSS);
-+
-+	/* bit size */
-+	switch(params_format(params)) {
-+	case SNDRV_PCM_FORMAT_S16_LE:
-+		SSCR0_P(port) |= SSCR0_DataSize(16);
-+		break;
-+	case SNDRV_PCM_FORMAT_S24_LE:
-+		SSCR0_P(port) |=(SSCR0_EDSS | SSCR0_DataSize(8));
-+		/* we must be in network mode (2 slots) for 24 bit stereo */
-+		break;
-+	case SNDRV_PCM_FORMAT_S32_LE:
-+		SSCR0_P(port) |= (SSCR0_EDSS | SSCR0_DataSize(16));
-+		/* we must be in network mode (2 slots) for 32 bit stereo */
-+		break;
-+	}
-+
-+#if PXA_SSP_DEBUG
-+	printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x SSACD %x\n",
-+		SSCR0_P(port), SSCR1_P(port),
-+		SSTO_P(port), SSPSP_P(port),
-+		SSSR_P(port), SSACD_P(port));
-+#endif
-+	return 0;
-+}
-+
-+static int pxa2xx_ssp_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+	int ret = 0;
-+	int port = cpu_dai->id + 1;
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_RESUME:
-+		ssp_enable(&ssp[cpu_dai->id]);
-+		break;
-+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			SSCR1_P(port) |= SSCR1_TSRE;
-+		else
-+			SSCR1_P(port) |= SSCR1_RSRE;
-+		SSSR_P(port) |= SSSR_P(port);
-+		break;
-+	case SNDRV_PCM_TRIGGER_START:
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			SSCR1_P(port) |= SSCR1_TSRE;
-+		else
-+			SSCR1_P(port) |= SSCR1_RSRE;
-+		ssp_enable(&ssp[cpu_dai->id]);
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			SSCR1_P(port) &= ~SSCR1_TSRE;
-+		else
-+			SSCR1_P(port) &= ~SSCR1_RSRE;
-+		break;
-+	case SNDRV_PCM_TRIGGER_SUSPEND:
-+		ssp_disable(&ssp[cpu_dai->id]);
-+		break;
-+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			SSCR1_P(port) &= ~SSCR1_TSRE;
-+		else
-+			SSCR1_P(port) &= ~SSCR1_RSRE;
-+		break;
-+
-+	default:
-+		ret = -EINVAL;
-+	}
-+#if PXA_SSP_DEBUG
-+	printk("trig cmd %d\n", cmd);
-+	printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x\n",
-+		SSCR0_P(port), SSCR1_P(port),
-+		SSTO_P(port), SSPSP_P(port),
-+		SSSR_P(port));
-+#endif
-+	return ret;
-+}
-+
-+#define PXA2XX_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
-+		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
-+		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-+
-+#define PXA2XX_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
-+	SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
-+
-+struct snd_soc_cpu_dai pxa_ssp_dai[] = {
-+	{	.name = "pxa2xx-ssp1",
-+		.id = 0,
-+		.type = SND_SOC_DAI_PCM,
-+		.suspend = pxa2xx_ssp_suspend,
-+		.resume = pxa2xx_ssp_resume,
-+		.playback = {
-+			.channels_min = 1,
-+			.channels_max = 2,
-+			.rates = PXA2XX_SSP_RATES,
-+			.formats = PXA2XX_SSP_FORMATS,},
-+		.capture = {
-+			.channels_min = 1,
-+			.channels_max = 2,
-+			.rates = PXA2XX_SSP_RATES,
-+			.formats = PXA2XX_SSP_FORMATS,},
-+		.ops = {
-+			.startup = pxa2xx_ssp_startup,
-+			.shutdown = pxa2xx_ssp_shutdown,
-+			.trigger = pxa2xx_ssp_trigger,
-+			.hw_params = pxa2xx_ssp_hw_params,},
-+		.dai_ops = {
-+			.set_sysclk = pxa2xx_ssp_set_dai_sysclk,
-+			.set_clkdiv = pxa2xx_ssp_set_dai_clkdiv,
-+			.set_pll = pxa2xx_ssp_set_dai_pll,
-+			.set_fmt = pxa2xx_ssp_set_dai_fmt,
-+			.set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot,
-+			.set_tristate = pxa2xx_ssp_set_dai_tristate,
-+		},
-+	},
-+	{	.name = "pxa2xx-ssp2",
-+		.id = 1,
-+		.type = SND_SOC_DAI_PCM,
-+		.suspend = pxa2xx_ssp_suspend,
-+		.resume = pxa2xx_ssp_resume,
-+		.playback = {
-+			.channels_min = 1,
-+			.channels_max = 2,
-+			.rates = PXA2XX_SSP_RATES,
-+			.formats = PXA2XX_SSP_FORMATS,},
-+		.capture = {
-+			.channels_min = 1,
-+			.channels_max = 2,
-+			.rates = PXA2XX_SSP_RATES,
-+			.formats = PXA2XX_SSP_FORMATS,},
-+		.ops = {
-+			.startup = pxa2xx_ssp_startup,
-+			.shutdown = pxa2xx_ssp_shutdown,
-+			.trigger = pxa2xx_ssp_trigger,
-+			.hw_params = pxa2xx_ssp_hw_params,},
-+		.dai_ops = {
-+			.set_sysclk = pxa2xx_ssp_set_dai_sysclk,
-+			.set_clkdiv = pxa2xx_ssp_set_dai_clkdiv,
-+			.set_pll = pxa2xx_ssp_set_dai_pll,
-+			.set_fmt = pxa2xx_ssp_set_dai_fmt,
-+			.set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot,
-+			.set_tristate = pxa2xx_ssp_set_dai_tristate,
-+		},
-+	},
-+	{	.name = "pxa2xx-ssp3",
-+		.id = 2,
-+		.type = SND_SOC_DAI_PCM,
-+		.suspend = pxa2xx_ssp_suspend,
-+		.resume = pxa2xx_ssp_resume,
-+		.playback = {
-+			.channels_min = 1,
-+			.channels_max = 2,
-+			.rates = PXA2XX_SSP_RATES,
-+			.formats = PXA2XX_SSP_FORMATS,},
-+		.capture = {
-+			.channels_min = 1,
-+			.channels_max = 2,
-+			.rates = PXA2XX_SSP_RATES,
-+			.formats = PXA2XX_SSP_FORMATS,},
-+		.ops = {
-+			.startup = pxa2xx_ssp_startup,
-+			.shutdown = pxa2xx_ssp_shutdown,
-+			.trigger = pxa2xx_ssp_trigger,
-+			.hw_params = pxa2xx_ssp_hw_params,},
-+		.dai_ops = {
-+			.set_sysclk = pxa2xx_ssp_set_dai_sysclk,
-+			.set_clkdiv = pxa2xx_ssp_set_dai_clkdiv,
-+			.set_pll = pxa2xx_ssp_set_dai_pll,
-+			.set_fmt = pxa2xx_ssp_set_dai_fmt,
-+			.set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot,
-+			.set_tristate = pxa2xx_ssp_set_dai_tristate,
-+		},
-+	},
-+};
-+EXPORT_SYMBOL_GPL(pxa_ssp_dai);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
-+MODULE_DESCRIPTION("pxa2xx SSP/PCM SoC Interface");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/sound/soc/pxa/pxa2xx-ssp.h	2007-09-02 22:48:59.000000000 -0300
-@@ -0,0 +1,42 @@
-+/*
-+ * linux/sound/arm/pxa2xx-ssp.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _PXA2XX_SSP_H
-+#define _PXA2XX_SSP_H
-+
-+/* pxa2xx DAI SSP ID's */
-+#define PXA2XX_DAI_SSP1			0
-+#define PXA2XX_DAI_SSP2			1
-+#define PXA2XX_DAI_SSP3			2
-+
-+/* SSP clock sources */
-+#define PXA2XX_SSP_CLK_PLL	0
-+#define PXA2XX_SSP_CLK_EXT	1
-+#define PXA2XX_SSP_CLK_NET	2
-+#define PXA2XX_SSP_CLK_AUDIO	3
-+
-+/* SSP audio dividers */
-+#define PXA2XX_SSP_AUDIO_DIV_ACDS		0
-+#define PXA2XX_SSP_AUDIO_DIV_SCDB		1
-+#define PXA2XX_SSP_DIV_SCR				2
-+
-+/* SSP ACDS audio dividers values */
-+#define PXA2XX_SSP_CLK_AUDIO_DIV_1		0
-+#define PXA2XX_SSP_CLK_AUDIO_DIV_2		1
-+#define PXA2XX_SSP_CLK_AUDIO_DIV_4		2
-+#define PXA2XX_SSP_CLK_AUDIO_DIV_8		3
-+#define PXA2XX_SSP_CLK_AUDIO_DIV_16	4
-+#define PXA2XX_SSP_CLK_AUDIO_DIV_32	5
-+
-+/* SSP divider bypass */
-+#define PXA2XX_SSP_CLK_SCDB_4		0
-+#define PXA2XX_SSP_CLK_SCDB_1		1
-+
-+extern struct snd_soc_cpu_dai pxa_ssp_dai[3];
-+
-+#endif
-Index: linux-2.6.21/sound/soc/pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/sound/soc/pxa/Kconfig	2007-09-02 22:48:51.000000000 -0300
-+++ linux-2.6.21/sound/soc/pxa/Kconfig	2007-09-02 22:50:18.000000000 -0300
-@@ -20,6 +20,10 @@
- config SND_PXA2XX_SOC_I2S
- 	tristate
- 
-+config SND_PXA2XX_SOC_SSP
-+	tristate
-+	select PXA_SSP
-+
- config SND_PXA2XX_SOC_CORGI
- 	tristate "SoC Audio support for Sharp Zaurus SL-C7x0"
- 	depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx
-Index: linux-2.6.21/sound/soc/pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/sound/soc/pxa/Makefile	2007-09-02 22:48:51.000000000 -0300
-+++ linux-2.6.21/sound/soc/pxa/Makefile	2007-09-02 22:50:18.000000000 -0300
-@@ -2,10 +2,12 @@
- snd-soc-pxa2xx-objs := pxa2xx-pcm.o
- snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o
- snd-soc-pxa2xx-i2s-objs := pxa2xx-i2s.o
-+snd-soc-pxa2xx-ssp-objs := pxa2xx-ssp.o
- 
- obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o
- obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o
- obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o
-+obj-$(CONFIG_SND_PXA2XX_SOC_SSP) += snd-soc-pxa2xx-ssp.o
- 
- # PXA Machine Support
- snd-soc-corgi-objs := corgi.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/dmesg-a780.log b/packages/linux/linux-ezx-2.6.21/patches/dmesg-a780.log
deleted file mode 100755
index 6b15077676..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/dmesg-a780.log
+++ /dev/null
@@ -1,299 +0,0 @@
-<5>Linux version 2.6.21-ezxdev (wyrm@vault) (gcc version 4.1.1) #222 PREEMPT Tue May 8 15:19:34 BRT 2007
-<4>CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
-<4>Machine: Motorola Ezx Platform
-<4>Memory policy: ECC disabled, Data cache writeback
-<7>On node 0 totalpages: 12288
-<7>  DMA zone: 416 pages used for memmap
-<7>  DMA zone: 0 pages reserved
-<7>  DMA zone: 11872 pages, LIFO batch:1
-<7>  Normal zone: 0 pages used for memmap
-<6>Run Mode clock: 195.00MHz (*15)
-<6>Turbo Mode clock: 292.50MHz (*1.5, active)
-<6>Memory clock: 195.00MHz (/2)
-<6>System bus clock: 195.00MHz 
-<4>CPU0: D VIVT undefined 5 cache
-<4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
-<4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
-<4>Built 1 zonelists.  Total pages: 11872
-<5>Kernel command line: console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 ip=169.254.1.11:169.254.1.10:169.254.1.10:255.255.255.254:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000
-<4>PID hash table entries: 256 (order: 8, 1024 bytes)
-<4>Console: colour dummy device 80x30
-<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
-<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
-<6>Memory: 32MB 16MB = 48MB total
-<5>Memory: 46084KB available (2264K code, 217K data, 84K init)
-<7>Calibrating delay loop... 291.63 BogoMIPS (lpj=1458176)
-<4>Mount-cache hash table entries: 512
-<6>CPU: Testing write buffer coherency: ok
-<6>NET: Registered protocol family 16
-<6>usbcore: registered new interface driver usbfs
-<6>usbcore: registered new interface driver hub
-<6>usbcore: registered new device driver usb
-<6>Time: pxa_timer clocksource has been installed.
-<6>NET: Registered protocol family 2
-<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
-<4>TCP established hash table entries: 2048 (order: 2, 16384 bytes)
-<4>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
-<6>TCP: Hash tables configured (established 2048 bind 2048)
-<6>TCP reno registered
-<4>bp handshake entered!
-<4>ezx-bp: handshake step 2
-<4>BP rdy irq
-<4>bp handshake entered!
-<5>ezx-bp: handshake passed
-<4>ezx-pcap: ssp driver registered
-<6>io scheduler noop registered
-<6>io scheduler deadline registered (default)
-<4>pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00200878
-<4>pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00300008
-<4>Console: switching to colour frame buffer device 60x53
-<6>usbcore: registered new interface driver usb ipc
-<6>drivers/char/ts0710_mux_usb.c: USB Host(Bulverde) IPC driver registered.
-<6>drivers/char/ts0710_mux_usb.c: 1.0alpha1:USB IPC Driver (TS07.10 lowlevel)
-<6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
-<6>pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
-<6>pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
-<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
-<6>pxa27x-ohci pxa27x-ohci: PXA27x OHCI
-<6>pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
-<6>pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
-<6>usb usb1: configuration #1 chosen from 1 choice
-<6>hub 1-0:1.0: USB hub found
-<6>hub 1-0:1.0: 3 ports detected
-<6>pxa27x_udc: version 08-Feb-2007
-<5>USB cmd disconnect
-<5>USB cmd disconnect
-<4>ether gadget: using random self ethernet address
-<4>ether gadget: using random host ethernet address
-<6>usb0: Ethernet Gadget, version: May Day 2005
-<6>usb0: using pxa27x_udc, OUT Bulk-out-2 IN Bulk-in-1
-<6>usb0: MAC 46:86:e0:79:e7:fb
-<5>USB cmd connect
-<5>USB cmd connect
-<6>input: gpio-keys as /class/input/input0
-<6>input: pxa-keyboard as /class/input/input1
-<6>input: pcap-touchscreen as /class/input/input2
-<6>sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
-<6>Registered led device: a780:main
-<6>Registered led device: a780:aux
-<6>Registered led device: a780:vibrator
-<6>TCP cubic registered
-<6>NET: Registered protocol family 1
-<6>NET: Registered protocol family 17
-<6>XScale iWMMXt coprocessor detected.
-<6>sa1100-rtc sa1100-rtc: setting the system clock to 1970-01-01 00:00:16 (16)
-<6>mmcblk0: mmc0:bffc SU02G 1985024KiB 
-<6>udc: USB reset
-<6> mmcblk0:<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 2
-<4> p1 p2 p3 < p5 p6 p7 >
-<6>udc: USB reset
-<3>usb 1-3: device descriptor read/64, error -62
-<6>usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
-<3>usb 1-3: device descriptor read/64, error -62
-<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 3
-<3>usb 1-3: device descriptor read/64, error -62
-<4>IP-Config: Complete:
-<4>      device=usb0, addr=169.254.1.11, mask=255.255.255.254, gw=169.254.1.10,
-<4>     host=ezx, domain=, nis-domain=(none),
-<4>     bootserver=169.254.1.10, rootserver=169.254.1.10, rootpath=
-<6>kjournald starting.  Commit interval 5 seconds
-<4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
-<6>EXT3 FS on mmcblk0p2, internal journal
-<6>EXT3-fs: recovery complete.
-<6>EXT3-fs: mounted filesystem with ordered data mode.
-<4>VFS: Mounted root (ext3 filesystem).
-<6>Freeing init memory: 84K
-<3>usb 1-3: device descriptor read/64, error -110
-<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 4
-<3>usb 1-3: device descriptor read/8, error -62
-<4>usb 1-3: config 1 has an invalid interface number: 13 but max is 2
-<4>usb 1-3: config 1 has an invalid interface number: 6 but max is 2
-<4>usb 1-3: config 1 has an invalid interface number: 7 but max is 2
-<4>usb 1-3: config 1 has no interface number 0
-<4>usb 1-3: config 1 has no interface number 1
-<4>usb 1-3: config 1 has no interface number 2
-<6>usb 1-3: configuration #1 chosen from 1 choice
-<4>usb_ipc_probe: completed probe!
-<6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported.
-<4>usb ipc: probe of 1-3:1.6 failed with error -1
-<6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported.
-<4>usb ipc: probe of 1-3:1.7 failed with error -1
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
-<4>Read 21 bytes.
-<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
-<4>Read 21 bytes.
-<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
-<4>Read 21 bytes.
-<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
-<4>Read 21 bytes.
-<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
-<4>Read 21 bytes.
-<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 11 bytes.
-<4>Reading max 2037 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 17 bytes.
-<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 11 bytes.
-<4>Reading max 2037 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 7 bytes.
-<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 11 bytes.
-<4>Reading max 2037 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1984 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1952 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1920 bytes from ts0710_mux_usb inbuf.
-<4>Read 6 bytes.
-<4>Reading max 1914 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1882 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1850 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1818 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1786 bytes from ts0710_mux_usb inbuf.
-<4>Read 6 bytes.
-<4>Reading max 1780 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1748 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1716 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1684 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1652 bytes from ts0710_mux_usb inbuf.
-<4>Read 6 bytes.
-<4>Reading max 1646 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1984 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1952 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1920 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1888 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1856 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1824 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1792 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1760 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1728 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1696 bytes from ts0710_mux_usb inbuf.
-<4>Read 16 bytes.
-<4>Reading max 1680 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1984 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1952 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1920 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1888 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1856 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1824 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1792 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1760 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1728 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 1696 bytes from ts0710_mux_usb inbuf.
-<4>Read 13 bytes.
-<4>Reading max 1683 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 14 bytes.
-<4>Reading max 2034 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>Read 32 bytes.
-<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
-<4>Read 2 bytes.
-<4>Reading max 2014 bytes from ts0710_mux_usb inbuf.
-<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
-<4>nonzero read bulk status received: -104
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch b/packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch
deleted file mode 100644
index 3824079c15..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c	2007-09-24 20:14:54.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c	2007-09-24 20:15:18.000000000 -0300
-@@ -203,8 +203,15 @@
- 	},
- };
- 
-+
-+struct platform_device e6_eoc_device = {
-+	.name		= "ezx-eoc",
-+	.id		= -1,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e6_pcap_device,
-+	&e6_eoc_device,
- };
- 
- static void __init e6_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch
deleted file mode 100644
index 08a6f97820..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c	2007-09-07 11:51:55.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c	2007-09-07 11:54:52.000000000 -0300
-@@ -13,6 +13,8 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/fb.h>
-+#include <linux/mmc/host.h>
-+#include <linux/irq.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -20,12 +22,102 @@
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/mmc.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
- 
-+#ifdef CONFIG_EZX_PCAP
-+extern int ezx_pcap_mmcsd_power(int);
-+extern void ezx_pcap_mmcsd_voltage(u_int32_t);
-+#else
-+#define ezx_pcap_mmcsd_voltage(x) {}
-+#define ezx_pcap_mmcsd_power(x) {}
-+#endif
-+
-+static struct pxamci_platform_data e6_mci_platform_data;
-+
-+static u_int8_t mmc_voltage[] = {
-+	[MMC_VDD_160] = 5,
-+	[MMC_VDD_170] = 5,
-+	[MMC_VDD_180] = 6,
-+	[MMC_VDD_190] = 6,
-+	[MMC_VDD_200] = 7,
-+	[MMC_VDD_210] = 7,
-+	[MMC_VDD_220] = 8,
-+	[MMC_VDD_230] = 8,
-+	[MMC_VDD_240] = 9,
-+	[MMC_VDD_250] = 9,
-+	[MMC_VDD_260] = 10,
-+	[MMC_VDD_270] = 10,
-+	[MMC_VDD_280] = 11,
-+	[MMC_VDD_290] = 11,
-+	[MMC_VDD_300] = 12,
-+	[MMC_VDD_310] = 12,
-+	[MMC_VDD_320] = 13,
-+	[MMC_VDD_330] = 13,
-+	[MMC_VDD_340] = 14,
-+	[MMC_VDD_350] = 14,
-+	[MMC_VDD_360] = 15,
-+};
-+
-+static int e6_mci_init(struct device *dev,
-+                       irqreturn_t (*ezx_detect_int)(int, void *),
-+                       void *data)
-+{
-+       int err;
-+
-+       /* Setup GPIO for PXA27x MMC/SD controller */
-+       pxa_gpio_mode(GPIO32_MMCCLK_MD);
-+       pxa_gpio_mode(GPIO112_MMCCMD_MD);
-+       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-+       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-+       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-+       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-+
-+       ezx_pcap_mmcsd_power(1);
-+
-+       e6_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-+
-+       err = request_irq(0x49, ezx_detect_int, SA_INTERRUPT,
-+                       "MMC card detect", data);
-+       if (err) {
-+               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
-+                       "MMC card detect IRQ\n");
-+               return -1;
-+       }
-+
-+       set_irq_type(0x0b, IRQT_BOTHEDGE);
-+
-+       return 0;
-+}
-+
-+static void e6_mci_setpower(struct device *dev, unsigned int vdd)
-+{
-+	if (vdd <= MMC_VDD_360)
-+		ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
-+
-+	ezx_pcap_mmcsd_power(1);
-+}
-+
-+static void e6_mci_exit(struct device *dev, void *data)
-+{
-+	ezx_pcap_mmcsd_power(0);
-+	free_irq(0x49, data);
-+}
-+
-+static struct pxamci_platform_data e6_mci_platform_data = {
-+	.ocr_mask       = MMC_VDD_160_165|MMC_VDD_18_19|MMC_VDD_20_21
-+			  |MMC_VDD_22_23|MMC_VDD_24_25|MMC_VDD_26_27
-+			  |MMC_VDD_28_29|MMC_VDD_30_31|MMC_VDD_32_33
-+			  |MMC_VDD_34_35|MMC_VDD_35_36,
-+	.init           = e6_mci_init,
-+	.setpower       = e6_mci_setpower,
-+	.exit           = e6_mci_exit,
-+};
-+
- static struct pxafb_mode_info mode_e6 = {
-        .pixclock = 192308,
-        .xres = 240,
-@@ -118,6 +210,7 @@
- static void __init e6_init(void)
- {
- 	set_pxa_fb_info(&e6_fb_info);
-+	pxa_set_mci_info(&e6_mci_platform_data);
- 
- 	platform_add_devices(devices, ARRAY_SIZE(devices));
- }
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch
deleted file mode 100644
index a11adbc02e..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c	2007-09-07 11:32:32.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c	2007-09-07 11:51:55.000000000 -0300
-@@ -19,6 +19,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
-+#include <asm/arch/ezx-pcap.h>
- 
- #include "generic.h"
- 
-@@ -48,7 +49,70 @@
-        .pxafb_lcd_power = &ezx_lcd_power,
- };
- 
-+/* PCAP */
-+static int __init e6_pcap_init(void)
-+{
-+	/*
-+	 * FIXME: this is the PCAP INITIAL STATE.
-+	 * most of these writes should NOT be done here
-+	 * * voltage regulators, voltage enablers should be set by the
-+	 *   driver which uses the connected hardware. Otherwise you
-+	 *   drain power unnecessarily.
-+	 * * interrupt related registers should be set by the irq functions
-+	 *   only. I think that the INT_SEL register selects on which irq
-+	 *   pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but
-+	 *   only if it actually makes any difference.
-+	 * * Only power state automatic changes should be done here.
-+	 *   (*LOWPWR, *STBY, LOWPWR*)
-+	 * * I removed some writes which i consider extremelly wrong. And
-+	 *   which i think will not break anything (they were overwritten
-+	 *   later anyway).
-+	 *
-+	 *   --WM
-+	 */
-+	ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */
-+	ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */
-+	ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */
-+	ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */
-+	ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c);
-+	ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */
-+	ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */
-+
-+	return 0;
-+}
-+
-+static struct pcap_platform_data e6_pcap_platform_data = {
-+	.port		= 1,
-+	.cs		= GPIO_SPI_CE,
-+	.flags		= PCAP_CS_AH | PCAP_MCI_SD,
-+	.clk		= 1,
-+	.init		= e6_pcap_init,
-+};
-+
-+static struct resource e6_pcap_resources[] = {
-+	[0] = {
-+		.start		= IRQ_GPIO1,
-+		.end		= IRQ_GPIO1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device e6_pcap_device = {
-+	.name		= "ezx-pcap",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(e6_pcap_resources),
-+	.resource	= e6_pcap_resources,
-+	.dev		= {
-+		.platform_data = &e6_pcap_platform_data,
-+	},
-+};
-+
- static struct platform_device *devices[] __initdata = {
-+	&e6_pcap_device,
- };
- 
- static void __init e6_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch
deleted file mode 100644
index ad4a52eeec..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c	2007-09-25 00:03:01.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c	2007-09-25 02:00:58.000000000 -0300
-@@ -209,9 +209,34 @@
- 	.id		= -1,
- };
- 
-+/* PCAP_TS */
-+struct resource pcap_ts_resources[] = {
-+	[0] = {
-+		.start          = EZX_IRQ_ADCDONE,
-+		.end            = EZX_IRQ_ADCDONE,
-+		.flags          = IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start          = EZX_IRQ_TS,
-+		.end            = EZX_IRQ_TS,
-+		.flags          = IORESOURCE_IRQ,
-+	}
-+};
-+
-+struct platform_device pcap_ts_device = {
-+	.name           = "pcap-ts",
-+	.id             = -1,
-+	.dev		= {
-+		.parent = &e6_pcap_device.dev,
-+	},
-+	.num_resources  = ARRAY_SIZE(pcap_ts_resources),
-+	.resource       = pcap_ts_resources,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e6_pcap_device,
- 	&e6_eoc_device,
-+	&pcap_ts_device,
- };
- 
- static void __init e6_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch
deleted file mode 100644
index 3645aef040..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-emu.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:47:32.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:48:06.000000000 -0300
-@@ -214,8 +214,33 @@
- 	},
- };
- 
-+/* EMU */
-+static struct resource e680_emu_resources[] = {
-+	[0] = {
-+		.start		= EZX_IRQ_USB4V,
-+		.end		= EZX_IRQ_USB4V,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start		= EZX_IRQ_USB1V,
-+		.end		= EZX_IRQ_USB1V,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device e680_emu_device = {
-+	.name		= "ezx-emu",
-+	.id		= -1,
-+	.dev		= {
-+		.parent		= &e680_pcap_device.dev,
-+	},
-+	.num_resources	= ARRAY_SIZE(e680_emu_resources),
-+	.resource	= e680_emu_resources,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e680_pcap_device,
-+	&e680_emu_device,
- };
- 
- static void __init e680_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch
deleted file mode 100755
index ffd8bbb754..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-kbd.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-07 11:07:33.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-07 11:10:47.000000000 -0300
-@@ -15,6 +15,7 @@
- #include <linux/fb.h>
- #include <linux/mmc/host.h>
- #include <linux/irq.h>
-+#include <linux/input.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -23,11 +24,13 @@
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
- #include <asm/arch/mmc.h>
-+#include <asm/arch/kbd.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
-+extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *);
- 
- #ifdef CONFIG_EZX_PCAP
- extern int ezx_pcap_mmcsd_power(int);
-@@ -238,6 +241,58 @@
- 	.resource	= e680_emu_resources,
- };
- 
-+static unsigned char e680_keycode[] = {
-+       /* row 0 */
-+       KEY_UP, KEY_RIGHT, KEY_RESERVED, KEY_PHONE,
-+       /* row 1 */
-+       KEY_DOWN, KEY_LEFT, KEY_VOLUMEUP, KEY_VOLUMEDOWN,
-+       /* row 2 */
-+       KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPENTER,
-+};
-+
-+static unsigned char e680_direct_keycode[] = {
-+       KEY_CAMERA,
-+       KEY_RESERVED,
-+       KEY_RESERVED,
-+       KEY_HOME,
-+       KEY_POWER,
-+       KEY_MENU,
-+};
-+
-+static int e680_kbd_init(void)
-+{
-+	pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<0>, VR Key */
-+	pxa_gpio_mode(96 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<3>, GAME_A */
-+	pxa_gpio_mode(97 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<4>, power key */
-+	pxa_gpio_mode(98 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<5>, GAME_B */
-+	pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<0> */
-+	pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<1> */
-+	pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<2> */
-+	pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
-+	pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
-+	pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
-+	pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
-+	pxa_gpio_mode(GPIO_TC_MM_EN);
-+	GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
-+	GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+	PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
-+	return 0;
-+}
-+
-+static struct pxakbd_platform_data e680_kbd_platform_data = {
-+       .init           = &e680_kbd_init,
-+       .scan_interval  = HZ/40,
-+       .matrix         = {
-+               .keycode = e680_keycode,
-+               .cols   = 4,
-+               .rows   = 3,
-+       },
-+       .direct         = {
-+               .keycode = e680_direct_keycode,
-+               .num    = 6,
-+       },
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e680_pcap_device,
- 	&e680_emu_device,
-@@ -258,6 +313,7 @@
- 
- 	set_pxa_fb_info(&e680_fb_info);
- 	pxa_set_mci_info(&e680_mci_platform_data);
-+	pxa_set_kbd_info(&e680_kbd_platform_data);
- 
-         /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
- 	pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch
deleted file mode 100755
index 72ba219a44..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-leds.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
-Index: linux-2.6.21/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/leds/Kconfig	2007-09-06 00:49:29.000000000 -0300
-+++ linux-2.6.21/drivers/leds/Kconfig	2007-09-06 00:51:36.000000000 -0300
-@@ -111,6 +111,13 @@
- 	  This option enables support for the LEDs on the
- 	  Motorola A780 GSM Phone.
- 
-+config LEDS_E680
-+	tristate "LED Support for the Motorola E680(i) GSM Phone"
-+	depends LEDS_CLASS && PXA_EZX_E680
-+	help
-+	  This options enables support for the LEDs on the
-+	  Motorola E680(i) GSM Phone.
-+
- config LEDS_TRIGGER_TIMER
- 	tristate "LED Timer Trigger"
- 	depends on LEDS_TRIGGERS
-Index: linux-2.6.21/drivers/leds/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/leds/Makefile	2007-09-06 00:49:29.000000000 -0300
-+++ linux-2.6.21/drivers/leds/Makefile	2007-09-06 00:49:30.000000000 -0300
-@@ -17,6 +17,7 @@
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
- obj-$(CONFIG_LEDS_A780)		+= leds-a780.o
-+obj-$(CONFIG_LEDS_E680)		+= leds-e680.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-Index: linux-2.6.21/drivers/leds/leds-e680.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/leds/leds-e680.c	2007-09-06 00:51:22.000000000 -0300
-@@ -0,0 +1,235 @@
-+/*
-+ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone
-+ *
-+ * Copyright 2006 Vanille-Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+
-+//FIXME move defines to a common header file
-+#define IND_CNTL_R_BUL     46
-+#define IND_CNTL_G_BUL     47
-+#define SSP_PCAP_LED_MASK  0x000fffe0
-+#define SSP_PCAP_LED_SHIFT 5
-+#define GPIO_TC_MM_EN      99
-+
-+extern int ezx_pcap_read(u_int8_t, u_int32_t *);
-+extern int ezx_pcap_write(u_int8_t, u_int32_t);
-+
-+typedef struct {
-+	u_int8_t ind_GPIO_red;    /*Indicator Red control GPIO 46: 0 active, 1 inactive */
-+	u_int8_t ind_GPIO_green;  /*Indicator Green control GPIO 47: 0 inactive, 1 active */
-+	u_int8_t pcap_LEDR_en;    /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/
-+	u_int8_t pcap_LEDG_en;    /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/
-+	u_int8_t pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/
-+	u_int8_t pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/
-+	u_int8_t pcap_LEDR_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/
-+	u_int8_t pcap_LEDG_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/
-+//	u_int8_t pcap_SKIP_on;  /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/
-+} PCAP2_LED_REGISTER_VALUE;
-+
-+const PCAP2_LED_REGISTER_VALUE led_register_value[]=
-+{
-+	{0x1,0x0, 0x0,0x0, 0x0,0x0, 0x1,0x0}, /* 0 OFF */
-+
-+	{0x0,0x0, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 1 RED */
-+	{0x1,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 2 GREEN */
-+	{0x0,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 3 ORANGE */
-+	{0x1,0x0, 0x0,0x1, 0x0,0xf, 0x0,0x0}, /* 4 BLUE */
-+	{0x0,0x0, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 5 MAGENTA */
-+	{0x1,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 6 CYAN */
-+	{0x0,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 7 WHITE */
-+};
-+
-+static void e680led_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	unsigned int tempValue;
-+	unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl,
-+			ledg_ctrl, ledr_i, ledg_i, skip, t, color;
-+	unsigned char t_mask[2] = { 0xc, 0xc };
-+
-+	skip = 0;
-+	if (value & 128) {
-+		value &= (~128);
-+		skip = 1;
-+	}
-+
-+	/* 7 colors - simple on */
-+	if (value <= 7)
-+		color = value;
-+	/* 4 colors - 11 timed on */
-+	else if (value <= 51) {
-+		value -= 7;
-+		color = ((value-1)%4)+1;
-+		t = ((value-1)/4)+1;
-+		t_mask[0] = t;
-+		t_mask[1] = t;
-+	}
-+	/* 3 colors - 22 change color */
-+	else if (value <= 84) {
-+		value -= 51;
-+		color = ((value-1)%3)+5;
-+		t = ((value-1)/3)+1;
-+		t_mask[1] = t;
-+	}
-+	else if (value <= 117) {
-+		value -= 84;
-+		color = ((value-1)%3)+5;
-+		t = ((value-1)/3)+1;
-+		t_mask[0] = t;
-+	}
-+	/* 3 colors - alternate with blue */
-+	else if (value <= 120) {
-+		color = value-113;
-+		t_mask[0] = 0xa;
-+		t_mask[1] = 0xb;
-+	}
-+	/* invalid value */
-+	else
-+		color = 1;
-+
-+	gpio_red   = led_register_value[color].ind_GPIO_red;
-+	gpio_green = led_register_value[color].ind_GPIO_green;
-+	ledr_en    = led_register_value[color].pcap_LEDR_en;
-+	ledg_en    = led_register_value[color].pcap_LEDG_en;
-+	ledr_ctrl  = led_register_value[color].pcap_LEDR_CTRL & t_mask[0];
-+	ledg_ctrl  = led_register_value[color].pcap_LEDG_CTRL & t_mask[1];
-+	ledr_i     = led_register_value[color].pcap_LEDR_I;
-+	ledg_i     = led_register_value[color].pcap_LEDG_I;
-+
-+	ezx_pcap_read(PCAP_REG_PERIPH,&tempValue);
-+
-+	tempValue &= (~SSP_PCAP_LED_MASK);
-+
-+	pxa_gpio_set_value(IND_CNTL_R_BUL, gpio_red);
-+	pxa_gpio_set_value(IND_CNTL_G_BUL, gpio_green);
-+
-+	/* Write PCAP LED Peripheral Control Register*/
-+	tempValue = ((ledr_en | (ledg_en << 1) | (ledr_ctrl << 2) |
-+		(ledg_ctrl << 6) | (ledr_i << 10) | (ledg_i << 12) |
-+		(skip << 14)) & 0x7fff) << SSP_PCAP_LED_SHIFT;
-+
-+	ezx_pcap_write(PCAP_REG_PERIPH,tempValue);
-+}
-+
-+static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	/* this is not working yet, as there is something else missing */
-+#if 0
-+	printk( KERN_DEBUG "e680led_keypad_set: %d\n", value );
-+
-+	pxa_gpio_mode(GPIO_TC_MM_EN);
-+	GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
-+	GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+
-+	udelay( 100 );
-+
-+    if ( value ) {
-+		GPCR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+		PGSR3 &= ~GPIO_bit(GPIO_TC_MM_EN);
-+    } else {
-+		GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
-+		PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
-+    }
-+#endif
-+}
-+
-+static struct led_classdev e680_led = {
-+	.name			= "e680:led",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_set,
-+};
-+
-+static struct led_classdev e680_keypad = {
-+	.name			= "e680:keypad",
-+	.default_trigger	= "none",
-+	.brightness_set		= e680led_keypad_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int e680led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	led_classdev_suspend(&e680_led);
-+	led_classdev_suspend(&e680_keypad);
-+	return 0;
-+}
-+
-+static int e680led_resume(struct platform_device *dev)
-+{
-+	led_classdev_resume(&e680_led);
-+	led_classdev_resume(&e680_keypad);
-+	return 0;
-+}
-+#endif
-+
-+static int e680led_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	/* configure GPIOs as output */
-+	pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT);
-+	pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT);
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_led);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = led_classdev_register(&pdev->dev, &e680_keypad);
-+	if (ret < 0) {
-+		led_classdev_unregister(&e680_led);
-+	}
-+	return ret;
-+}
-+
-+static int e680led_remove(struct platform_device *pdev)
-+{
-+	led_classdev_unregister(&e680_led);
-+	led_classdev_unregister(&e680_keypad);
-+	return 0;
-+}
-+
-+static struct platform_driver e680led_driver = {
-+	.probe		= e680led_probe,
-+	.remove		= e680led_remove,
-+#ifdef CONFIG_PM
-+	.suspend	= e680led_suspend,
-+	.resume		= e680led_resume,
-+#endif
-+	.driver		= {
-+		.name		= "e680-led",
-+	},
-+};
-+
-+static int __init e680led_init(void)
-+{
-+	return platform_driver_register(&e680led_driver);
-+}
-+
-+static void __exit e680led_exit(void)
-+{
-+	platform_driver_unregister(&e680led_driver);
-+}
-+
-+module_init(e680led_init);
-+module_exit(e680led_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Motorola E680 LED driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:49:23.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:49:30.000000000 -0300
-@@ -339,11 +339,20 @@
-        },
- };
- 
-+static struct platform_device e680led_device = {
-+	.name		= "e680-led",
-+	.id		= -1,
-+	.dev		= {
-+		.parent = &e680_pcap_device.dev,
-+	},
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e680_pcap_device,
- 	&e680_emu_device,
- 	&pcap_ts_device,
- 	&e680locksw_device,
-+	&e680led_device,
- };
- 
- static void __init e680_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch
deleted file mode 100755
index e669a51957..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-locksw.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:48:32.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:49:23.000000000 -0300
-@@ -16,6 +16,7 @@
- #include <linux/mmc/host.h>
- #include <linux/irq.h>
- #include <linux/input.h>
-+#include <linux/gpio_keys.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -317,10 +318,32 @@
- 	.resource       = pcap_ts_resources,
- };
- 
-+static struct gpio_keys_button e680locksw_buttons[] = {
-+       [0] = {
-+               .keycode        = KEY_SLEEP,
-+               .gpio           = GPIO_LOCK_SCREEN_PIN,
-+               .desc           = "E680 lockscreen sw",
-+       },
-+};
-+
-+static struct gpio_keys_platform_data e680locksw_platform_data = {
-+       .buttons        = e680locksw_buttons,
-+       .nbuttons       = 1,
-+};
-+
-+static struct platform_device e680locksw_device = {
-+       .name           = "gpio-keys",
-+       .id             = -1,
-+       .dev            = {
-+               .platform_data  = &e680locksw_platform_data,
-+       },
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e680_pcap_device,
- 	&e680_emu_device,
- 	&pcap_ts_device,
-+	&e680locksw_device,
- };
- 
- static void __init e680_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch
deleted file mode 100755
index 7f0826163d..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-mci.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-07 11:32:30.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-07 11:54:44.000000000 -0300
-@@ -13,6 +13,8 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/fb.h>
-+#include <linux/mmc/host.h>
-+#include <linux/irq.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -20,12 +22,106 @@
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
- #include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/mmc.h>
- 
- #include "generic.h"
- 
- extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
- extern void ezx_backlight_power(int);
- 
-+#ifdef CONFIG_EZX_PCAP
-+extern int ezx_pcap_mmcsd_power(int);
-+extern void ezx_pcap_mmcsd_voltage(u_int32_t);
-+#else
-+#define ezx_pcap_mmcsd_voltage(x) {}
-+#define ezx_pcap_mmcsd_power(x) {}
-+#endif
-+
-+static struct pxamci_platform_data e680_mci_platform_data;
-+
-+static u_int8_t mmc_voltage[] = {
-+	[MMC_VDD_160] = 3,
-+	[MMC_VDD_170] = 3,
-+	[MMC_VDD_180] = 3,
-+	[MMC_VDD_190] = 3,
-+	[MMC_VDD_200] = 3,
-+	[MMC_VDD_210] = 3,
-+	[MMC_VDD_220] = 3,
-+	[MMC_VDD_230] = 3,
-+	[MMC_VDD_240] = 3,
-+	[MMC_VDD_250] = 3,
-+	[MMC_VDD_260] = 3,
-+	[MMC_VDD_270] = 3,
-+	[MMC_VDD_280] = 3,
-+	[MMC_VDD_290] = 3,
-+	[MMC_VDD_300] = 3,
-+	[MMC_VDD_310] = 3,
-+	[MMC_VDD_320] = 3,
-+	[MMC_VDD_330] = 3,
-+	[MMC_VDD_340] = 3,
-+	[MMC_VDD_350] = 3,
-+	[MMC_VDD_360] = 3,
-+};
-+
-+static int e680_mci_init(struct device *dev,
-+                       irqreturn_t (*ezx_detect_int)(int, void *),
-+                       void *data)
-+{
-+       int err;
-+
-+       /* Setup GPIO for PXA27x MMC/SD controller */
-+       pxa_gpio_mode(GPIO32_MMCCLK_MD);
-+       pxa_gpio_mode(GPIO112_MMCCMD_MD);
-+       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-+       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-+       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-+       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-+
-+       ezx_pcap_mmcsd_power(1);
-+
-+       e680_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-+
-+       err = request_irq(0x49, ezx_detect_int, SA_INTERRUPT,
-+                       "MMC card detect", data);
-+       if (err) {
-+               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
-+                       "MMC card detect IRQ\n");
-+               return -1;
-+       }
-+
-+       set_irq_type(0x0b, IRQT_BOTHEDGE);
-+
-+       return 0;
-+}
-+
-+
-+static inline int e680_mci_get_ro(struct device *dev)
-+{
-+        return (GPLR3 & 0x800);
-+}
-+
-+static void e680_mci_setpower(struct device *dev, unsigned int vdd)
-+{
-+        if (vdd <= MMC_VDD_360)
-+                ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
-+
-+        ezx_pcap_mmcsd_power(1);
-+}
-+
-+static void e680_mci_exit(struct device *dev, void *data)
-+{
-+	ezx_pcap_mmcsd_power(0);
-+	free_irq(0x49, data);
-+}
-+
-+static struct pxamci_platform_data e680_mci_platform_data = {
-+	.ocr_mask       = MMC_VDD_27_28,
-+	.init           = e680_mci_init,
-+	.get_ro		= e680_mci_get_ro,
-+	.setpower       = e680_mci_setpower,
-+	.exit           = e680_mci_exit,
-+};
-+
- static struct pxafb_mode_info mode_e680 = {
- 	.pixclock	= 150000,
- 	.xres		= 240,
-@@ -136,6 +232,7 @@
- 	PSLR  = 0x05800f00;
- 
- 	set_pxa_fb_info(&e680_fb_info);
-+	pxa_set_mci_info(&e680_mci_platform_data);
- 
-         /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
- 	pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch
deleted file mode 100644
index 12ce023749..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-pcap.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:41:38.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-06 00:44:56.000000000 -0300
-@@ -19,6 +19,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ezx.h>
-+#include <asm/arch/ezx-pcap.h>
- 
- #include "generic.h"
- 
-@@ -48,7 +49,77 @@
- 	.pxafb_lcd_power = &ezx_lcd_power,
- };
- 
-+/* PCAP */
-+static int __init e680_pcap_init(void)
-+{
-+	/* initialize PCAP registers */
-+	/* set SW1 sleep to keep SW1 1.3v in sync mode */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0);
-+
-+	/*  SW1 active in sync mode */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0);
-+
-+	/*  at SW1 -core voltage to 1.30V   */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0);
-+
-+	/* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off  */
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0);
-+
-+	/*
-+	 * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 ---
-+	 * camera for e680
-+	 */
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0);
-+
-+	/* set Vc to low power mode when AP sleep */
-+//	SSP_PCAP_bit_set( PCAP_BIT_LOWPWR_CTRL_VC_STBY);
-+
-+	/* set VAUX2 to low power mode when AP sleep */
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1);
-+
-+	return 0;
-+}
-+
-+static struct pcap_platform_data e680_pcap_platform_data = {
-+	.port		= 1,
-+	.cs		= GPIO_SPI_CE,
-+	.flags		= PCAP_MCI_SD,
-+	.clk		= 1,
-+	.init		= e680_pcap_init,
-+};
-+
-+static struct resource e680_pcap_resources[] = {
-+	[0] = {
-+		.start		= IRQ_GPIO1,
-+		.end		= IRQ_GPIO1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+struct platform_device e680_pcap_device = {
-+	.name		= "ezx-pcap",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(e680_pcap_resources),
-+	.resource	= e680_pcap_resources,
-+	.dev		= {
-+		.platform_data = &e680_pcap_platform_data,
-+	},
-+};
-+
- static struct platform_device *devices[] __initdata = {
-+	&e680_pcap_device,
- };
- 
- static void __init e680_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch
deleted file mode 100755
index 109623c68c..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/e680-ts.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c	2007-09-07 11:10:47.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-07 11:11:01.000000000 -0300
-@@ -293,9 +293,34 @@
-        },
- };
- 
-+/* PCAP_TS */
-+struct resource pcap_ts_resources[] = {
-+	[0] = {
-+		.start          = EZX_IRQ_ADCDONE2,
-+		.end            = EZX_IRQ_ADCDONE2,
-+		.flags          = IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start          = EZX_IRQ_TS,
-+		.end            = EZX_IRQ_TS,
-+		.flags          = IORESOURCE_IRQ,
-+	}
-+};
-+
-+struct platform_device pcap_ts_device = {
-+	.name           = "pcap-ts",
-+	.id             = -1,
-+	.dev		= {
-+		.parent = &e680_pcap_device.dev,
-+	},
-+	.num_resources  = ARRAY_SIZE(pcap_ts_resources),
-+	.resource       = pcap_ts_resources,
-+};
-+
- static struct platform_device *devices[] __initdata = {
- 	&e680_pcap_device,
- 	&e680_emu_device,
-+	&pcap_ts_device,
- };
- 
- static void __init e680_init(void)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch
deleted file mode 100644
index 1dda2e544c..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-asoc.patch
+++ /dev/null
@@ -1,1302 +0,0 @@
-Index: linux-2.6.21/sound/soc/codecs/pcap2.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/sound/soc/codecs/pcap2.c	2007-09-07 14:28:32.000000000 -0300
-@@ -0,0 +1,796 @@
-+/*
-+ * pcap2.c - PCAP2 ASIC Audio driver
-+ *
-+ * 	Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/pm.h>
-+#include <linux/platform_device.h>
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/soc-dapm.h>
-+#include <sound/initval.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/ezx.h>
-+#include <asm/arch/hardware.h>
-+
-+#include "pcap2.h"
-+
-+#define AUDIO_NAME "pcap2-codec"
-+#define PCAP2_VERSION "0.1"
-+
-+extern int ezx_pcap_write(u_int8_t, u_int32_t);
-+extern int ezx_pcap_read(u_int8_t, u_int32_t *);
-+static struct snd_soc_device *pcap2_codec_socdev;
-+
-+/*
-+ * Debug
-+ */
-+
-+//#define PCAP2_DEBUG
-+
-+#ifdef PCAP2_DEBUG
-+#define dbg(format, arg...) \
-+	printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg)
-+#else
-+#define dbg(format, arg...)
-+#endif
-+
-+#define err(format, arg...) \
-+	printk(KERN_ERR AUDIO_NAME ": " format "\n" , ## arg)
-+#define info(format, arg...) \
-+	printk(KERN_INFO AUDIO_NAME ": " format "\n" , ## arg)
-+#define warn(format, arg...) \
-+	printk(KERN_WARNING AUDIO_NAME ": " format "\n" , ## arg)
-+
-+#define dump_registers()	pcap2_codec_read(NULL, 13); \
-+				pcap2_codec_read(NULL, 12); \
-+				pcap2_codec_read(NULL, 11); \
-+				pcap2_codec_read(NULL, 26);
-+
-+
-+
-+
-+/*
-+ * ASoC limits register value to 16 bits and pcap uses 32 bit registers
-+ * to work around this, we get 16 bits from low, mid or high positions.
-+ * ASoC limits register number to 8 bits we use 0x1f for register
-+ * number and 0xe0 for register offset. -WM
-+ */
-+static int pcap2_codec_write(struct snd_soc_codec *codec, unsigned int reg,
-+	unsigned int value)
-+{
-+	unsigned int tmp;
-+
-+	ezx_pcap_read((reg & 0x1f), &tmp);
-+
-+	if (reg & SL) {
-+		tmp &= 0xffff0000;
-+		tmp |= (value & 0xffff);
-+	}
-+	else if (reg & SM) {
-+		tmp &= 0xff0000ff;
-+		tmp |= ((value << 8) & 0x00ffff00);
-+	}
-+	else if (reg & SH) {
-+		tmp &= 0xffff;
-+		tmp |= ((value << 16) & 0xffff0000);
-+	}
-+	else
-+		tmp = value;
-+
-+	dbg("codec_write reg=%x, rval=%08x, fval=%08x", reg, tmp,  value);
-+	ezx_pcap_write((reg & 0x1f), tmp);
-+	return 0;
-+
-+}
-+
-+static unsigned int pcap2_codec_read(struct snd_soc_codec *codec, unsigned int reg)
-+{
-+	unsigned int tmp, ret;
-+
-+	ezx_pcap_read((reg & 0x1f), &tmp);
-+	ret = tmp;
-+	if (reg & SL)
-+		ret = (tmp & 0xffff);
-+	else if (reg & SM)
-+		ret = ((tmp >> 8) & 0xffff);
-+	else if (reg & SH)
-+		ret = ((tmp >> 16) & 0xffff);
-+
-+	dbg("codec_read  reg=%x, rval=%08x, fval=%08x", reg, tmp, ret);
-+	return(ret);
-+
-+}
-+
-+static const char *pcap2_output_select[] = {"2ch", "2->1ch", "2->1ch -3db", "2->1ch -6db"};
-+
-+static const struct soc_enum pcap2_enum[] = {
-+SOC_ENUM_SINGLE((PCAP2_OUTPUT_AMP|SH), 3, 4, pcap2_output_select),
-+};
-+
-+static const struct snd_kcontrol_new pcap2_input_mixer_controls[] = {
-+SOC_DAPM_SINGLE("A3 Switch", (PCAP2_INPUT_AMP|SL), 6, 1, 0),
-+SOC_DAPM_SINGLE("A5 Switch", (PCAP2_INPUT_AMP|SL), 8, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new pcap2_output_mixer_controls[] = {
-+SOC_DAPM_SINGLE("A1 Switch", (PCAP2_OUTPUT_AMP|SL), 0, 1, 0),
-+SOC_DAPM_SINGLE("A2 Switch", (PCAP2_OUTPUT_AMP|SL), 1, 1, 0),
-+SOC_DAPM_SINGLE("AR Switch", (PCAP2_OUTPUT_AMP|SL), 5, 1, 0),
-+SOC_DAPM_SINGLE("AL Switch", (PCAP2_OUTPUT_AMP|SL), 6, 1, 0),
-+};
-+
-+/* pcap2 codec non DAPM controls */
-+static const struct snd_kcontrol_new pcap2_codec_snd_controls[] = {
-+SOC_SINGLE("Output gain", (PCAP2_OUTPUT_AMP|SM),  5, 15, 0),
-+SOC_SINGLE("Input gain", (PCAP2_INPUT_AMP|SL),   0, 31, 0),
-+};
-+
-+static const struct snd_kcontrol_new pcap2_codec_dm_mux_control[] = {
-+	SOC_DAPM_ENUM("Output Mode",	pcap2_enum[0]),
-+};
-+
-+/* add non dapm controls */
-+static int pcap2_codec_add_controls(struct snd_soc_codec *codec)
-+{
-+	int err, i;
-+
-+	for (i = 0; i < ARRAY_SIZE(pcap2_codec_snd_controls); i++) {
-+		if ((err = snd_ctl_add(codec->card,
-+				snd_soc_cnew(&pcap2_codec_snd_controls[i],codec, NULL))) < 0)
-+			return err;
-+	}
-+
-+	return 0;
-+}
-+
-+/* pcap2 codec DAPM controls */
-+static const struct snd_soc_dapm_widget pcap2_codec_dapm_widgets[] = {
-+	SND_SOC_DAPM_DAC("ST_DAC", "ST_DAC playback", SND_SOC_NOPM, 0, 0),
-+	SND_SOC_DAPM_DAC("CDC_DAC", "CDC_DAC playback", SND_SOC_NOPM, 0, 0),
-+	SND_SOC_DAPM_ADC("CDC_ADC", "CDC_DAC capture", SND_SOC_NOPM, 0, 0),
-+	SND_SOC_DAPM_PGA("PGA_ST", (PCAP2_OUTPUT_AMP|SL), 9, 0, NULL, 0),
-+	SND_SOC_DAPM_PGA("PGA_CDC", (PCAP2_OUTPUT_AMP|SL), 8, 0, NULL, 0),
-+	SND_SOC_DAPM_PGA("PGA_R", (PCAP2_OUTPUT_AMP|SL), 11, 0, NULL, 0),
-+	SND_SOC_DAPM_PGA("PGA_L", (PCAP2_OUTPUT_AMP|SL), 12, 0, NULL, 0),
-+	SND_SOC_DAPM_MUX("Downmixer", SND_SOC_NOPM, 0, 0, pcap2_codec_dm_mux_control),
-+	SND_SOC_DAPM_PGA("PGA_A1CTRL", (PCAP2_OUTPUT_AMP|SH), 1, 1, NULL, 0),
-+	SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0, &pcap2_output_mixer_controls[0], ARRAY_SIZE(pcap2_output_mixer_controls)),
-+	SND_SOC_DAPM_OUTPUT("A1"), /* Earpiece */
-+	SND_SOC_DAPM_OUTPUT("A2"), /* LoudSpeaker */
-+	SND_SOC_DAPM_OUTPUT("AR"), /* headset right */
-+	SND_SOC_DAPM_OUTPUT("AL"), /* headset left */
-+
-+	SND_SOC_DAPM_MICBIAS("BIAS1", (PCAP2_INPUT_AMP|SL), 10, 0),
-+	SND_SOC_DAPM_MICBIAS("BIAS2", (PCAP2_INPUT_AMP|SL), 11, 0),
-+	SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, &pcap2_input_mixer_controls[0], ARRAY_SIZE(pcap2_input_mixer_controls)),
-+	SND_SOC_DAPM_INPUT("A3"), /* Headset Mic */
-+	SND_SOC_DAPM_INPUT("A5"), /* Builtin Mic */
-+};
-+
-+static const char *audio_map[][3] = {
-+	{ "A1", NULL, "Output Mixer" },
-+	{ "A2", NULL, "Output Mixer" },
-+	{ "AR", NULL, "Output Mixer" },
-+	{ "AL", NULL, "Output Mixer" },
-+
-+	{ "Output Mixer", "A1 Switch", "PGA_A1CTRL" },
-+	{ "Output Mixer", "A2 Switch", "Downmixer" },
-+	{ "Output Mixer", "AR Switch", "PGA_R" },
-+	{ "Output Mixer", "AL Switch", "PGA_L" },
-+
-+	{ "PGA_A1CTRL", NULL, "Downmixer" },
-+
-+	{ "Downmixer", "2->1ch", "PGA_L" },
-+	{ "Downmixer", "2->1ch", "PGA_R" },
-+	{ "Downmixer", "2->1ch -3db", "PGA_L" },
-+	{ "Downmixer", "2->1ch -3db", "PGA_R" },
-+	{ "Downmixer", "2->1ch -6db", "PGA_L" },
-+	{ "Downmixer", "2->1ch -6db", "PGA_R" },
-+	{ "Downmixer", "2ch", "PGA_R" },
-+
-+	{ "PGA_R", NULL, "PGA_ST" },
-+	{ "PGA_L", NULL, "PGA_ST" },
-+	{ "PGA_R", NULL, "PGA_CDC" },
-+
-+	{ "PGA_ST", NULL, "ST_DAC" },
-+	{ "PGA_CDC", NULL, "CDC_DAC" },
-+
-+	/* input path */
-+	{ "BIAS1", NULL, "A3" },
-+	{ "BIAS2", NULL, "A5" },
-+
-+	{ "Input Mixer", "A3 Switch", "BIAS1" },
-+	{ "Input Mixer", "A5 Switch", "BIAS2" },
-+
-+	{ "PGA_R", NULL, "Input Mixer" },
-+
-+	{ "PGA_CDC", NULL, "PGA_R" },
-+	{ "CDC_ADC", NULL, "PGA_CDC" },
-+
-+	/* terminator */
-+	{NULL, NULL, NULL},
-+};
-+
-+static int pcap2_codec_add_widgets(struct snd_soc_codec *codec)
-+{
-+	int i;
-+
-+	for(i = 0; i < ARRAY_SIZE(pcap2_codec_dapm_widgets); i++) {
-+		snd_soc_dapm_new_control(codec, &pcap2_codec_dapm_widgets[i]);
-+	}
-+
-+	/* set up audio path interconnects */
-+	for(i = 0; audio_map[i][0] != NULL; i++) {
-+		snd_soc_dapm_connect_input(codec, audio_map[i][0],
-+			audio_map[i][1], audio_map[i][2]);
-+	}
-+
-+	snd_soc_dapm_new_widgets(codec);
-+	return 0;
-+}
-+
-+static int pcap2_codec_dapm_event(struct snd_soc_codec *codec, int event)
-+{
-+	unsigned int input = pcap2_codec_read(codec, PCAP2_INPUT_AMP);
-+
-+	input &= ~PCAP2_INPUT_AMP_LOWPWR;
-+
-+	switch (event) {
-+	case SNDRV_CTL_POWER_D0:
-+	case SNDRV_CTL_POWER_D1:
-+	case SNDRV_CTL_POWER_D2:
-+	case SNDRV_CTL_POWER_D3hot: /* Off, with power */
-+		dbg("dapm: ON\n");
-+		break;
-+	case SNDRV_CTL_POWER_D3cold: /* Off, without power */
-+		input |= PCAP2_INPUT_AMP_LOWPWR;
-+		dbg("dapm: OFF\n");
-+		break;
-+	}
-+	codec->dapm_state = event;
-+	pcap2_codec_write(codec, PCAP2_INPUT_AMP, input);
-+	return 0;
-+}
-+
-+static int pcap2_hw_params(struct snd_pcm_substream *substream,
-+				struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
-+	struct snd_soc_codec *codec = codec_dai->codec;
-+	unsigned int tmp;
-+
-+	if (codec_dai->id == PCAP2_STEREO_DAI) {
-+		tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
-+
-+		tmp &= ~PCAP2_ST_DAC_RATE_MASK;
-+		switch(params_rate(params)) {
-+		case 8000:
-+			break;
-+		case 11025:
-+			tmp |= PCAP2_ST_DAC_RATE_11025;
-+			break;
-+		case 12000:
-+			tmp |= PCAP2_ST_DAC_RATE_12000;
-+			break;
-+		case 16000:
-+			tmp |= PCAP2_ST_DAC_RATE_16000;
-+			break;
-+		case 22050:
-+			tmp |= PCAP2_ST_DAC_RATE_22050;
-+			break;
-+		case 24000:
-+			tmp |= PCAP2_ST_DAC_RATE_24000;
-+			break;
-+		case 32000:
-+			tmp |= PCAP2_ST_DAC_RATE_32000;
-+			break;
-+		case 44100:
-+			tmp |= PCAP2_ST_DAC_RATE_44100;
-+			break;
-+		case 48000:
-+			tmp |= PCAP2_ST_DAC_RATE_48000;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+		tmp |= PCAP2_ST_DAC_RESET_DF;
-+		pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
-+	}
-+	else {
-+		tmp = pcap2_codec_read(codec, PCAP2_CODEC);
-+
-+		tmp &= ~PCAP2_CODEC_RATE_MASK;
-+		switch(params_rate(params)) {
-+		case 8000:
-+			break;
-+		case 16000:
-+			tmp |= PCAP2_CODEC_RATE_16000;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+		tmp |= PCAP2_CODEC_RESET_DF;
-+		pcap2_codec_write(codec, PCAP2_CODEC, tmp);
-+	}
-+
-+	return 0;
-+}
-+
-+static int pcap2_hw_free(struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
-+	struct snd_soc_codec *codec = codec_dai->codec;
-+	struct snd_soc_dapm_widget *w;
-+	unsigned int tmp;
-+
-+	if (codec_dai->id == PCAP2_STEREO_DAI) {
-+		snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0);
-+		tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
-+		tmp &= ~(PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN);
-+		pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
-+	}
-+	else {
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0);
-+		else
-+			snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0);
-+		list_for_each_entry(w, &codec->dapm_widgets, list) {
-+			if ((!strcmp(w->name, "CDC_DAC") || !strcmp(w->name, "CDC_ADC")) && w->connected)
-+				goto in_use;
-+		}
-+		tmp = pcap2_codec_read(codec, PCAP2_CODEC);
-+		tmp &= ~(PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN);
-+		pcap2_codec_write(codec, PCAP2_CODEC, tmp);
-+	}
-+in_use:
-+	snd_soc_dapm_sync_endpoints(codec);
-+
-+	return 0;
-+}
-+
-+static int pcap2_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai,
-+		int clk_id, unsigned int freq, int dir)
-+{
-+	struct snd_soc_codec *codec = codec_dai->codec;
-+
-+	unsigned int tmp;
-+	if (codec_dai->id == PCAP2_STEREO_DAI) {
-+		/* ST_DAC */
-+
-+		tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
-+
-+		tmp &= ~PCAP2_ST_DAC_CLKSEL_MASK;
-+		switch (clk_id) {
-+		case PCAP2_CLK_AP:
-+			tmp |= PCAP2_ST_DAC_CLKSEL_AP;
-+			break;
-+		case PCAP2_CLK_BP:
-+			break;
-+		default:
-+			return -ENODEV;
-+		}
-+
-+		tmp &= ~PCAP2_ST_DAC_CLK_MASK;
-+		switch (freq) {
-+		case 13000000:
-+			break;
-+/*		case 15M36:
-+			tmp |= PCAP2_ST_DAC_CLK_15M36;
-+			break;
-+		case 16M8:
-+			tmp |= PCAP2_ST_DAC_CLK_16M8;
-+			break;
-+		case 19M44:
-+			tmp |= PCAP2_ST_DAC_CLK_19M44;
-+			break;
-+*/		case 26000000:
-+			tmp |= PCAP2_ST_DAC_CLK_26M;
-+			break;
-+/*		case EXT_MCLK:
-+			tmp |= PCAP2_ST_DAC_CLK_MCLK;
-+			break;
-+		case FSYNC:
-+			tmp |= PCAP2_ST_DAC_CLK_FSYNC;
-+			break;
-+		case BITCLK:
-+			tmp |= PCAP2_ST_DAC_CLK_BITCLK;
-+			break;
-+*/		default:
-+			return -EINVAL;
-+		}
-+		pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
-+	}
-+	else {
-+		/* MONO_DAC */
-+		tmp = pcap2_codec_read(codec, PCAP2_CODEC);
-+
-+		tmp &= ~PCAP2_CODEC_CLKSEL_MASK;
-+		switch (clk_id) {
-+		case PCAP2_CLK_AP:
-+			tmp |= PCAP2_CODEC_CLKSEL_AP;
-+			break;
-+		case PCAP2_CLK_BP:
-+			break;
-+		default:
-+			return -ENODEV;
-+		}
-+
-+		tmp &= ~PCAP2_CODEC_CLK_MASK;
-+		switch (freq) {
-+		case 13000000:
-+			break;
-+/*		case 15M36:
-+			tmp |= PCAP2_CODEC_CLK_15M36;
-+			break;
-+		case 16M8:
-+			tmp |= PCAP2_CODEC_CLK_16M8;
-+			break;
-+		case 19M44:
-+			tmp |= PCAP2_CODEC_CLK_19M44;
-+			break;
-+*/		case 26000000:
-+			tmp |= PCAP2_CODEC_CLK_26M;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+		pcap2_codec_write(codec, PCAP2_CODEC, tmp);
-+	}
-+	return 0;
-+}
-+
-+static int pcap2_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
-+		unsigned int fmt)
-+{
-+	struct snd_soc_codec *codec = codec_dai->codec;
-+	unsigned int tmp = 0;
-+
-+	if (codec_dai->id == PCAP2_STEREO_DAI) {
-+		/* ST_DAC */
-+
-+		/* disable CODEC */
-+		pcap2_codec_write(codec, PCAP2_CODEC, 0);
-+
-+		switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+		case SND_SOC_DAIFMT_CBM_CFM:
-+			break;
-+		case SND_SOC_DAIFMT_CBS_CFS:
-+			tmp |= 0x1;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+
-+		switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+		case SND_SOC_DAIFMT_I2S:
-+			tmp |= 0x4000;
-+			break;
-+/*		case SND_SOC_NET:
-+			tmp |= 0x2000;
-+			break;
-+*/		case SND_SOC_DAIFMT_DSP_B:
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+
-+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+		case SND_SOC_DAIFMT_IB_IF:
-+			break;
-+		case SND_SOC_DAIFMT_NB_NF:
-+			tmp |= 0x60000;
-+			break;
-+		case SND_SOC_DAIFMT_IB_NF:
-+			tmp |= 0x40000;
-+			break;
-+		case SND_SOC_DAIFMT_NB_IF:
-+			tmp |= 0x20000;
-+			break;
-+		}
-+		/* set dai to AP */
-+		tmp |= 0x1000;
-+
-+		/* set BCLK */
-+		tmp |= 0x18000;
-+
-+		pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
-+	}
-+	else {
-+		/* MONO_DAC */
-+
-+		/* disable ST_DAC */
-+		pcap2_codec_write(codec, PCAP2_ST_DAC, 0);
-+
-+		switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+		case SND_SOC_DAIFMT_CBM_CFM:
-+			break;
-+		case SND_SOC_DAIFMT_CBS_CFS:
-+			tmp |= 0x2;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+
-+		switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+		case SND_SOC_DAIFMT_DSP_B:
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+
-+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+		case SND_SOC_DAIFMT_IB_IF:
-+			break;
-+		case SND_SOC_DAIFMT_NB_NF:
-+			tmp |= 0x600;
-+			break;
-+		case SND_SOC_DAIFMT_IB_NF:
-+			tmp |= 0x400;
-+			break;
-+		case SND_SOC_DAIFMT_NB_IF:
-+			tmp |= 0x200;
-+			break;
-+		}
-+		if (codec_dai->id == PCAP2_MONO_DAI)
-+			/* set dai to AP */
-+			tmp |= 0x8000;
-+
-+		tmp |= 0x5; /* IHF / OHF */
-+
-+		pcap2_codec_write(codec, PCAP2_CODEC, tmp);
-+	}
-+	return 0;
-+}
-+
-+static int pcap2_prepare(struct snd_pcm_substream *substream)
-+{
-+
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
-+	struct snd_soc_codec *codec = codec_dai->codec;
-+	unsigned int tmp;
-+	/* FIXME enable clock only if codec is master */
-+	if (codec_dai->id == PCAP2_STEREO_DAI) {
-+		snd_soc_dapm_set_endpoint(codec, "ST_DAC", 1);
-+		snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0);
-+		snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0);
-+		tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
-+		tmp |= (PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN);
-+		pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
-+	}
-+	else {
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 1);
-+		else
-+			snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 1);
-+		snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0);
-+		tmp = pcap2_codec_read(codec, PCAP2_CODEC);
-+		tmp |= (PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN);
-+		pcap2_codec_write(codec, PCAP2_CODEC, tmp);
-+	}
-+	snd_soc_dapm_sync_endpoints(codec);
-+	mdelay(1);
-+#ifdef PCAP2_DEBUG
-+	dump_registers();
-+#endif
-+	return 0;
-+}
-+
-+/*
-+ * Define codec DAI.
-+ */
-+struct snd_soc_codec_dai pcap2_dai[] = {
-+{
-+	.name = "PCAP2 MONO",
-+	.id = 0,
-+	.playback = {
-+		.stream_name = "CDC_DAC playback",
-+		.channels_min = 1,
-+		.channels_max = 1,
-+		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.capture = {
-+		.stream_name = "CDC_DAC capture",
-+		.channels_min = 1,
-+		.channels_max = 1,
-+		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.ops = {
-+		.prepare = pcap2_prepare,
-+		.hw_params = pcap2_hw_params,
-+		.hw_free = pcap2_hw_free,
-+	},
-+	.dai_ops = {
-+//		.digital_mute = pcap2_mute,
-+		.set_fmt = pcap2_set_dai_fmt,
-+		.set_sysclk = pcap2_set_dai_sysclk,
-+	},
-+},
-+{
-+	.name = "PCAP2 STEREO",
-+	.id = 1,
-+	.playback = {
-+		.stream_name = "ST_DAC playback",
-+		.channels_min = 1,
-+		.channels_max = 2,
-+		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
-+			SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
-+			SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
-+			SNDRV_PCM_RATE_48000),
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.capture = { /* FIXME: PCAP support this?? */
-+		.stream_name = "ST_DAC capture",
-+		.channels_min = 1,
-+		.channels_max = 1,
-+		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
-+			SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
-+			SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
-+			SNDRV_PCM_RATE_48000),
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.ops = {
-+		.prepare = pcap2_prepare,
-+		.hw_params = pcap2_hw_params,
-+		.hw_free = pcap2_hw_free,
-+	},
-+	.dai_ops = {
-+//		.digital_mute = pcap2_mute,
-+		.set_fmt = pcap2_set_dai_fmt,
-+		.set_sysclk = pcap2_set_dai_sysclk,
-+	},
-+},
-+{
-+	.name = "PCAP2 BP",
-+	.id = 2,
-+	.playback = {
-+		.stream_name = "BP playback",
-+		.channels_min = 1,
-+		.channels_max = 1,
-+		.rates = SNDRV_PCM_RATE_8000,
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.ops = {
-+		.prepare = pcap2_prepare,
-+		.hw_params = pcap2_hw_params,
-+		.hw_free = pcap2_hw_free,
-+	},
-+	.dai_ops = {
-+//		.digital_mute = pcap2_mute,
-+		.set_fmt = pcap2_set_dai_fmt,
-+		.set_sysclk = pcap2_set_dai_sysclk,
-+	},
-+},
-+};
-+EXPORT_SYMBOL_GPL(pcap2_dai);
-+
-+static int pcap2_codec_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-+	struct snd_soc_codec *codec = socdev->codec;
-+
-+	dbg("pcap2_codec_suspend");
-+	pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
-+	return 0;
-+}
-+
-+static int pcap2_codec_resume(struct platform_device *pdev)
-+{
-+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-+	struct snd_soc_codec *codec = socdev->codec;
-+
-+	dbg("pcap2_codec_resume");
-+	pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
-+	pcap2_codec_dapm_event(codec, codec->suspend_dapm_state);
-+	return 0;
-+}
-+
-+/*
-+ * initialise the PCAP2 driver
-+ * register the mixer and dsp interfaces with the kernel
-+ */
-+static int pcap2_codec_init(struct snd_soc_device *socdev)
-+{
-+	struct snd_soc_codec *codec = socdev->codec;
-+	int ret = 0;
-+
-+	dbg("pcap2_codec_init");
-+	codec->name = "PCAP2 Audio";
-+	codec->owner = THIS_MODULE;
-+	codec->read = pcap2_codec_read;
-+	codec->write = pcap2_codec_write;
-+	codec->dapm_event = pcap2_codec_dapm_event;
-+	codec->dai = pcap2_dai;
-+	codec->num_dai = ARRAY_SIZE(pcap2_dai);
-+
-+	/* register pcms */
-+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-+	if (ret < 0) {
-+		return ret;
-+	}
-+	/* power on device */
-+	pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
-+	/* set the update bits */
-+
-+	pcap2_codec_add_controls(codec);
-+	pcap2_codec_add_widgets(codec);
-+	ret = snd_soc_register_card(socdev);
-+	if (ret < 0) {
-+		snd_soc_free_pcms(socdev);
-+		snd_soc_dapm_free(socdev);
-+	}
-+
-+	return ret;
-+}
-+
-+static int pcap2_codec_probe(struct platform_device *pdev)
-+{
-+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-+	struct pcap2_codec_setup_data *setup;
-+	struct snd_soc_codec *codec;
-+	int ret = 0;
-+	info("PCAP2 Audio Codec %s", PCAP2_VERSION);
-+
-+	setup = socdev->codec_data;
-+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-+	if (codec == NULL)
-+		return -ENOMEM;
-+
-+	socdev->codec = codec;
-+	mutex_init(&codec->mutex);
-+	INIT_LIST_HEAD(&codec->dapm_widgets);
-+	INIT_LIST_HEAD(&codec->dapm_paths);
-+
-+	pcap2_codec_socdev = socdev;
-+
-+	ret = pcap2_codec_init(socdev);
-+	return ret;
-+}
-+
-+/* power down chip and remove */
-+static int pcap2_codec_remove(struct platform_device *pdev)
-+{
-+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-+	struct snd_soc_codec *codec = socdev->codec;
-+	if (codec->control_data)
-+		pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
-+	snd_soc_free_pcms(socdev);
-+	snd_soc_dapm_free(socdev);
-+
-+	kfree(codec);
-+
-+	return 0;
-+}
-+
-+/* codec device ops */
-+struct snd_soc_codec_device soc_codec_dev_pcap2 = {
-+	.probe = 	pcap2_codec_probe,
-+	.remove = 	pcap2_codec_remove,
-+	.suspend = 	pcap2_codec_suspend,
-+	.resume =	pcap2_codec_resume,
-+};
-+
-+EXPORT_SYMBOL_GPL(soc_codec_dev_pcap2);
-+
-+MODULE_DESCRIPTION("ASoC PCAP2 codec");
-+MODULE_AUTHOR("Daniel Ribeiro");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/sound/soc/codecs/pcap2.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/sound/soc/codecs/pcap2.h	2007-09-07 12:13:49.000000000 -0300
-@@ -0,0 +1,81 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _PCAP2_H
-+#define _PCAP2_H
-+
-+/* 16 bit reads/writes on pcap registers (ugly workaround) */
-+#define SL (1 << 5)	/* lower 16 bits */
-+#define SM (1 << 6)	/* mid 16 bits */
-+#define SH (1 << 7)	/* higher 16 bits */
-+
-+/* PCAP2 register space */
-+#define PCAP2_CODEC			0x0b
-+#define PCAP2_OUTPUT_AMP		0x0c
-+#define PCAP2_ST_DAC			0x0d
-+#define PCAP2_INPUT_AMP			0x1a
-+
-+#define PCAP2_MONO_DAI			0
-+#define PCAP2_STEREO_DAI		1
-+#define PCAP2_BP_DAI			2
-+
-+#define PCAP2_CLK_BP			0
-+#define PCAP2_CLK_AP			1
-+
-+#define PCAP2_CODEC_EN			0x2000
-+#define PCAP2_CODEC_CLK_EN		0x1000
-+#define PCAP2_CODEC_RESET_DF		0x800
-+#define PCAP2_CODEC_RATE_MASK		0x4000
-+#define PCAP2_CODEC_RATE_8000		0x0
-+#define PCAP2_CODEC_RATE_16000		0x4000
-+#define PCAP2_CODEC_CLKSEL_MASK		0x10000
-+#define PCAP2_CODEC_CLKSEL_AP		0x10000
-+#define PCAP2_CODEC_CLKSEL_BP		0x0
-+#define PCAP2_CODEC_CLK_MASK		0x1c0
-+#define PCAP2_CODEC_CLK_13M		0x0
-+#define PCAP2_CODEC_CLK_15M36		0x40
-+#define PCAP2_CODEC_CLK_16M8		0x80
-+#define PCAP2_CODEC_CLK_19M44		0xc0
-+#define PCAP2_CODEC_CLK_26M		0x100
-+
-+#define PCAP2_ST_DAC_EN			0x80
-+#define PCAP2_ST_DAC_CLK_EN		0x20
-+#define PCAP2_ST_DAC_RESET_DF		0x40
-+#define PCAP2_ST_DAC_RATE_MASK		0xf00
-+#define PCAP2_ST_DAC_RATE_8000		0x0
-+#define PCAP2_ST_DAC_RATE_11025		0x100
-+#define PCAP2_ST_DAC_RATE_12000		0x200
-+#define PCAP2_ST_DAC_RATE_16000		0x300
-+#define PCAP2_ST_DAC_RATE_22050		0x400
-+#define PCAP2_ST_DAC_RATE_24000		0x500
-+#define PCAP2_ST_DAC_RATE_32000		0x600
-+#define PCAP2_ST_DAC_RATE_44100		0x700
-+#define PCAP2_ST_DAC_RATE_48000		0x800
-+#define PCAP2_ST_DAC_CLKSEL_MASK	0x80000
-+#define PCAP2_ST_DAC_CLKSEL_AP		0x80000
-+#define PCAP2_ST_DAC_CLKSEL_BP		0x0
-+#define PCAP2_ST_DAC_CLK_MASK		0x1c
-+#define PCAP2_ST_DAC_CLK_13M		0x0
-+#define PCAP2_ST_DAC_CLK_15M36		0x4
-+#define PCAP2_ST_DAC_CLK_16M8		0x8
-+#define PCAP2_ST_DAC_CLK_19M44		0xc
-+#define PCAP2_ST_DAC_CLK_26M		0x10
-+#define PCAP2_ST_DAC_CLK_MCLK		0x14
-+#define PCAP2_ST_DAC_CLK_FSYNC		0x18
-+#define PCAP2_ST_DAC_CLK_BITCLK		0x1c
-+
-+#define PCAP2_INPUT_AMP_LOWPWR		0x80000
-+#define PCAP2_INPUT_AMP_V2EN2		0x200000
-+
-+#define PCAP2_OUTPUT_AMP_PGAR_EN	0x800
-+#define PCAP2_OUTPUT_AMP_PGAL_EN	0x1000
-+#define PCAP2_OUTPUT_AMP_CDC_SW		0x100
-+#define PCAP2_OUTPUT_AMP_ST_DAC_SW	0x200
-+
-+extern struct snd_soc_codec_dai pcap2_dai[];
-+extern struct snd_soc_codec_device soc_codec_dev_pcap2;
-+
-+#endif
-Index: linux-2.6.21/sound/soc/pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/sound/soc/pxa/Kconfig	2007-09-07 12:13:43.000000000 -0300
-+++ linux-2.6.21/sound/soc/pxa/Kconfig	2007-09-07 12:13:49.000000000 -0300
-@@ -60,4 +60,13 @@
- 	  Say Y if you want to add support for SoC audio on Sharp
- 	  Zaurus SL-C6000x models (Tosa).
- 
-+config SND_PXA2XX_SOC_EZX
-+	tristate "SoC Audio support for EZX"
-+	depends on SND_PXA2XX_SOC && PXA_EZX
-+	select SND_PXA2XX_SOC_SSP
-+	select SND_SOC_PCAP2
-+	help
-+	  Say Y if you want to add support for SoC audio on
-+	  Motorola EZX Phones (a780/e680).
-+
- endmenu
-Index: linux-2.6.21/sound/soc/pxa/ezx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/sound/soc/pxa/ezx.c	2007-09-07 13:12:24.000000000 -0300
-@@ -0,0 +1,349 @@
-+/*
-+ * ezx.c - Machine specific code for EZX phones
-+ *
-+ *	Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <sound/soc-dapm.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/hardware.h>
-+
-+#include <asm/arch/ezx-pcap.h>
-+
-+#include "../codecs/pcap2.h"
-+#include "pxa2xx-pcm.h"
-+#include "pxa2xx-ssp.h"
-+
-+#define GPIO_HW_ATTENUATE_A780  96
-+
-+static struct snd_soc_codec *control_codec;
-+
-+static void ezx_ext_control(struct snd_soc_codec *codec)
-+{
-+	if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_A1)))
-+		snd_soc_dapm_set_endpoint(codec, "Headset", 1);
-+	else
-+		snd_soc_dapm_set_endpoint(codec, "Headset", 0);
-+	if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_MB2)))
-+		snd_soc_dapm_set_endpoint(codec, "External Mic", 1);
-+	else
-+		snd_soc_dapm_set_endpoint(codec, "External Mic", 0);
-+
-+	snd_soc_dapm_sync_endpoints(codec);
-+}
-+
-+static irqreturn_t jack_irq(int irq, void *data)
-+{
-+	ezx_ext_control(control_codec);
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * Alsa operations
-+ * Only implement the required operations for your platform.
-+ * These operations are specific to the machine only.
-+ */
-+
-+ /*
-+ * Called by ALSA when a PCM substream is opened, private data can be allocated.
-+ */
-+static int ezx_machine_startup(struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec *codec = rtd->socdev->codec;
-+
-+	/* check the jack status at stream startup */
-+	ezx_ext_control(codec);
-+	return 0;
-+}
-+
-+/*
-+ * Called by ALSA when the hardware params are set by application. This
-+ * function can also be called multiple times and can allocate buffers
-+ * (using snd_pcm_lib_* ). It's non-atomic.
-+ */
-+static int ezx_machine_hw_params(struct snd_pcm_substream *substream,
-+				struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
-+	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+	int ret;
-+
-+	/* set codec DAI configuration */
-+	if (codec_dai->id == PCAP2_STEREO_DAI)
-+		ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
-+			SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
-+	else
-+		ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
-+			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
-+	if(ret < 0)
-+		return ret;
-+
-+	/* Turn on clock output on CLK_PIO */
-+	OSCC |= 0x8;
-+
-+	/* set clock source */
-+	ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_AP,
-+					13000000, SND_SOC_CLOCK_IN);
-+	if(ret < 0)
-+		return ret;
-+
-+	/* set cpu DAI configuration */
-+	ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B |
-+			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cpu_dai->dai_ops.set_tristate(cpu_dai, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_EXT,
-+						0, SND_SOC_CLOCK_IN);
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+/*
-+ * Free's resources allocated by hw_params, can be called multiple times
-+ */
-+static int ezx_machine_hw_free(struct snd_pcm_substream *substream)
-+{
-+	OSCC &= ~0x8; /* turn off clock output on CLK_PIO */
-+
-+	return 0;
-+}
-+
-+static int ezx_machine_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
-+	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+
-+	if (codec_dai->id == PCAP2_STEREO_DAI) {
-+		/* override pxa2xx-ssp sample size for stereo/network mode */
-+		SSCR0_P(cpu_dai->id+1) &= ~(SSCR0_DSS | SSCR0_EDSS);
-+		SSCR0_P(cpu_dai->id+1) |= (SSCR0_EDSS | SSCR0_DataSize(16));
-+	}
-+	return 0;
-+}
-+
-+/* machine Alsa PCM operations */
-+static struct snd_soc_ops ezx_ops = {
-+	.startup = ezx_machine_startup,
-+	.prepare = ezx_machine_prepare,
-+	.hw_free = ezx_machine_hw_free,
-+	.hw_params = ezx_machine_hw_params,
-+};
-+
-+static int bp_hw_params(struct snd_pcm_substream *substream,
-+				struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
-+//	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
-+	int ret = 0;
-+	/* set codec DAI configuration */
-+	ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
-+		SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
-+	if(ret < 0)
-+		return ret;
-+
-+	/* set clock source */
-+	ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_BP,
-+					13000000, SND_SOC_CLOCK_IN);
-+
-+	return ret;
-+}
-+
-+
-+
-+/* machine dapm widgets */
-+static const struct snd_soc_dapm_widget ezx_dapm_widgets[] = {
-+	SND_SOC_DAPM_HP("Headset", NULL),
-+	SND_SOC_DAPM_SPK("Earpiece", NULL),
-+	SND_SOC_DAPM_SPK("Loudspeaker", NULL),
-+	SND_SOC_DAPM_MIC("Built-in Mic", NULL),
-+	SND_SOC_DAPM_MIC("External Mic", NULL),
-+};
-+
-+/* machine audio map (connections to the codec pins) */
-+static const char *audio_map[][3] = {
-+	{ "Headset", NULL, "AR" },
-+	{ "Headset", NULL, "AL" },
-+	{ "Earpiece", NULL, "A1" },
-+	{ "Loudspeaker", NULL, "A2" },
-+
-+	{ "Built-in Mic", NULL, "A5" },
-+	{ "External Mic", NULL, "A3" },
-+
-+	{NULL, NULL, NULL},
-+};
-+
-+/*
-+ * Initialise the machine audio subsystem.
-+ */
-+static int ezx_machine_init(struct snd_soc_codec *codec)
-+{
-+	int i;
-+	/* mark unused codec pins as NC */
-+//	snd_soc_dapm_set_endpoint(codec, "FIXME", 0);
-+	control_codec = codec;
-+
-+        /* Add ezx specific controls */
-+//	for (i = 0; i < ARRAY_SIZE(ezx_controls); i++) {
-+//		if ((err = snd_ctl_add(codec->card, snd_soc_cnew(&ezx_controls[i], codec, NULL))) < 0)
-+//			return err;
-+//	}
-+
-+	/* Add ezx specific widgets */
-+	for(i = 0; i < ARRAY_SIZE(ezx_dapm_widgets); i++) {
-+		snd_soc_dapm_new_control(codec, &ezx_dapm_widgets[i]);
-+	}
-+	/* Set up ezx specific audio path interconnects */
-+	for(i = 0; audio_map[i][0] != NULL; i++) {
-+		snd_soc_dapm_connect_input(codec, audio_map[i][0], audio_map[i][1], audio_map[i][2]);
-+	}
-+
-+	/* synchronise subsystem */
-+	snd_soc_dapm_sync_endpoints(codec);
-+	return 0;
-+}
-+
-+static struct snd_soc_cpu_dai bp_dai =
-+{
-+	.name = "Baseband",
-+	.id = 0,
-+	.type = SND_SOC_DAI_PCM,
-+	.playback = {
-+		.channels_min = 1,
-+		.channels_max = 1,
-+		.rates = SNDRV_PCM_RATE_8000,
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.capture = {
-+		.channels_min = 1,
-+		.channels_max = 1,
-+		.rates = SNDRV_PCM_RATE_8000,
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.ops = {
-+//		.startup = bp_startup,
-+//		.shutdown = bp_shutdown,
-+		.hw_params = bp_hw_params,
-+//		.hw_free = bp_hw_free,
-+	},
-+};
-+
-+/* template digital audio interface glue - connects codec <--> CPU */
-+static struct snd_soc_dai_link ezx_dai[] = {
-+{
-+	.name = "PCAP2 STEREO",
-+	.stream_name = "stereo playback",
-+	.cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3],
-+	.codec_dai = &pcap2_dai[PCAP2_STEREO_DAI],
-+	.init = ezx_machine_init,
-+	.ops = &ezx_ops,
-+},
-+{
-+	.name = "PCAP2 MONO",
-+	.stream_name = "mono playback",
-+	.cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3],
-+	.codec_dai = &pcap2_dai[PCAP2_MONO_DAI],
-+//	.init = ezx_machine_init, /* the stereo call already registered our controls */
-+	.ops = &ezx_ops,
-+},
-+{
-+	.name = "PCAP2 BP",
-+	.stream_name = "BP Audio",
-+	.cpu_dai = &bp_dai,
-+	.codec_dai = &pcap2_dai[PCAP2_BP_DAI],
-+},
-+};
-+
-+/* template audio machine driver */
-+static struct snd_soc_machine snd_soc_machine_ezx = {
-+	.name = "Motorola EZX",
-+//	.probe
-+//	.remove
-+//	.suspend_pre
-+//	.resume_post
-+	.dai_link = ezx_dai,
-+	.num_links = ARRAY_SIZE(ezx_dai),
-+};
-+
-+/* template audio subsystem */
-+static struct snd_soc_device ezx_snd_devdata = {
-+	.machine = &snd_soc_machine_ezx,
-+	.platform = &pxa2xx_soc_platform,
-+	.codec_dev = &soc_codec_dev_pcap2,
-+};
-+
-+static struct platform_device *ezx_snd_device;
-+
-+static int __init ezx_init(void)
-+{
-+	int ret;
-+	ezx_snd_device = platform_device_alloc("soc-audio", -1);
-+	if (!ezx_snd_device)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(ezx_snd_device, &ezx_snd_devdata);
-+	ezx_snd_devdata.dev = &ezx_snd_device->dev;
-+	ret = platform_device_add(ezx_snd_device);
-+
-+	if (ret)
-+		platform_device_put(ezx_snd_device);
-+	/* configure gpio for ssp3 */
-+	pxa_gpio_mode(GPIO83_SFRM3_MD);	/* SFRM */
-+	pxa_gpio_mode(GPIO81_STXD3_MD);	/* TXD  */
-+	pxa_gpio_mode(GPIO52_SCLK3_MD);	/* SCLK */
-+	pxa_gpio_mode(GPIO89_SRXD3_MD);	/* RXD  */
-+
-+	/* configure gpio for ssp2 */
-+	pxa_gpio_mode(37 | GPIO_IN);	/* SFRM */
-+	pxa_gpio_mode(38 | GPIO_IN);	/* TXD  */
-+	pxa_gpio_mode(22 | GPIO_IN);	/* SCLK */
-+	pxa_gpio_mode(88 | GPIO_IN);	/* RXD  */
-+
-+	pxa_gpio_mode(GPIO_HW_ATTENUATE_A780 | GPIO_OUT);
-+	pxa_gpio_set_value(GPIO_HW_ATTENUATE_A780, 1);
-+
-+	/* request jack irq */
-+	request_irq(EZX_IRQ_HEADJACK, &jack_irq, SA_INTERRUPT, "headphone jack", NULL);
-+	request_irq(EZX_IRQ_MIC, &jack_irq, SA_INTERRUPT, "mic jack", NULL);
-+
-+	return ret;
-+}
-+
-+static void __exit ezx_exit(void)
-+{
-+	free_irq(EZX_IRQ_HEADJACK, NULL);
-+	free_irq(EZX_IRQ_MIC, NULL);
-+	platform_device_unregister(ezx_snd_device);
-+}
-+
-+module_init(ezx_init);
-+module_exit(ezx_exit);
-+
-Index: linux-2.6.21/sound/soc/codecs/Makefile
-===================================================================
---- linux-2.6.21.orig/sound/soc/codecs/Makefile	2007-09-07 12:13:43.000000000 -0300
-+++ linux-2.6.21/sound/soc/codecs/Makefile	2007-09-07 12:13:49.000000000 -0300
-@@ -2,8 +2,10 @@
- snd-soc-wm8731-objs := wm8731.o
- snd-soc-wm8750-objs := wm8750.o
- snd-soc-wm9712-objs := wm9712.o
-+snd-soc-pcap2-objs := pcap2.o
- 
- obj-$(CONFIG_SND_SOC_AC97_CODEC)	+= snd-soc-ac97.o
- obj-$(CONFIG_SND_SOC_WM8731)	+= snd-soc-wm8731.o
- obj-$(CONFIG_SND_SOC_WM8750)	+= snd-soc-wm8750.o
- obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
-+obj-$(CONFIG_SND_SOC_PCAP2)	+= snd-soc-pcap2.o
-Index: linux-2.6.21/sound/soc/codecs/Kconfig
-===================================================================
---- linux-2.6.21.orig/sound/soc/codecs/Kconfig	2007-09-07 12:13:43.000000000 -0300
-+++ linux-2.6.21/sound/soc/codecs/Kconfig	2007-09-07 12:13:49.000000000 -0300
-@@ -13,3 +13,7 @@
- config SND_SOC_WM9712
- 	tristate
- 	depends on SND_SOC
-+
-+config SND_SOC_PCAP2
-+	tristate
-+	depends on SND_SOC && EZX_PCAP
-Index: linux-2.6.21/sound/soc/pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/sound/soc/pxa/Makefile	2007-09-07 12:13:43.000000000 -0300
-+++ linux-2.6.21/sound/soc/pxa/Makefile	2007-09-07 12:13:49.000000000 -0300
-@@ -14,9 +14,10 @@
- snd-soc-poodle-objs := poodle.o
- snd-soc-tosa-objs := tosa.o
- snd-soc-spitz-objs := spitz.o
-+snd-soc-ezx-objs := ezx.o
- 
- obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
- obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
- obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o
- obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o
--
-+obj-$(CONFIG_SND_PXA2XX_SOC_EZX) += snd-soc-ezx.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch
deleted file mode 100755
index c0284e3a1f..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-backlight.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
-Index: linux-2.6.21/drivers/video/backlight/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/video/backlight/Kconfig	2007-08-01 19:38:48.000000000 -0300
-+++ linux-2.6.21/drivers/video/backlight/Kconfig	2007-08-01 20:00:56.000000000 -0300
-@@ -63,3 +63,12 @@
- 	help
- 	  If you have a Frontpath ProGear say Y to enable the
- 	  backlight driver.
-+
-+config BACKLIGHT_EZX
-+	tristate "Motorola EXZ Backlight Driver (A780/E680/E680i)"
-+	depends on BACKLIGHT_CLASS_DEVICE && PXA_EZX
-+	default y
-+	help
-+	  If you have a Motorola A780 or E680(i), say y to enable the
-+	  backlight driver.
-+
-Index: linux-2.6.21/drivers/video/backlight/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/video/backlight/Makefile	2007-08-01 19:38:48.000000000 -0300
-+++ linux-2.6.21/drivers/video/backlight/Makefile	2007-08-01 20:00:56.000000000 -0300
-@@ -6,3 +6,4 @@
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
-+obj-$(CONFIG_BACKLIGHT_EZX)	+= ezx_bl.o
-Index: linux-2.6.21/drivers/video/backlight/ezx_bl.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/video/backlight/ezx_bl.c	2007-08-01 20:00:56.000000000 -0300
-@@ -0,0 +1,142 @@
-+/*
-+ * Backlight Driver for Motorola A780 and E680(i) GSM Phones.
-+ *
-+ * Copyright 2006 Vanille Media
-+ *
-+ * Author: Michael Lauer <mickey@Vanille.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx.h>
-+
-+#define EZX_MIN_INTENSITY       0
-+#define EZX_MAX_INTENSITY      50
-+#define EZX_DEFAULT_INTENSITY  30
-+
-+static struct backlight_device *ezx_backlight_device;
-+static int last_intensity;
-+static int suspended;
-+
-+static int ezxbl_send_intensity(struct backlight_device *bd)
-+{
-+	int intensity = bd->props.brightness;
-+
-+	if (suspended || bd->props.power != FB_BLANK_UNBLANK ||
-+	    		bd->props.fb_blank != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+
-+	if ( !last_intensity && intensity ) {
-+		PWM_CTRL0 = 2; /* pre-scaler */
-+		PWM_PWDUTY0 = intensity; /* duty cycle */
-+		PWM_PERVAL0 = 49; /* period */
-+		pxa_gpio_mode(GPIO16_PWM0_MD); /* set GPIO16 as alternate function + output */
-+		pxa_set_cken(CKEN0_PWM0, 1); /* clock enable */
-+	}
-+	else if ( last_intensity && !intensity ) {
-+		PWM_PWDUTY0 = 0;
-+		GAFR0_U &= 0xFFFFFFFC; /* ??? */
-+		pxa_set_cken(CKEN0_PWM0, 0); /* clock disable */
-+		pxa_gpio_mode(GPIO16_PWM0); /* set GPIO16 as input */
-+	} else if ( last_intensity && intensity ) {
-+		PWM_PWDUTY0 = intensity; /* duty cycle */
-+	}
-+	last_intensity = intensity;
-+	return 0;
-+}
-+
-+static int ezxbl_get_intensity(struct backlight_device *bd)
-+{
-+	return last_intensity;
-+}
-+
-+static int ezxbl_set_intensity(struct backlight_device *bd)
-+{
-+	return ezxbl_send_intensity(ezx_backlight_device);
-+}
-+
-+#ifdef CONFIG_PM
-+static int ezxbl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	suspended = 1;
-+	ezxbl_set_intensity(ezx_backlight_device);
-+	return 0;
-+}
-+
-+static int ezxbl_resume(struct platform_device *pdev)
-+{
-+	suspended = 0;
-+	ezxbl_set_intensity(ezx_backlight_device);
-+	return 0;
-+}
-+#else
-+#define ezxbl_suspend	NULL
-+#define ezxbl_resume	NULL
-+#endif
-+
-+static struct backlight_ops ezxbl_ops = {
-+	.get_brightness = ezxbl_get_intensity,
-+	.update_status	= ezxbl_set_intensity,
-+};
-+
-+static int __init ezxbl_probe(struct platform_device *pdev)
-+{
-+	ezx_backlight_device = backlight_device_register ("ezx-bl",
-+		&pdev->dev, NULL, &ezxbl_ops);
-+	if (IS_ERR (ezx_backlight_device))
-+		return PTR_ERR (ezx_backlight_device);
-+
-+	platform_set_drvdata(pdev, ezx_backlight_device);
-+
-+	ezx_backlight_device->props.power = FB_BLANK_UNBLANK;
-+	ezx_backlight_device->props.max_brightness = EZX_MAX_INTENSITY;
-+	ezx_backlight_device->props.brightness = EZX_DEFAULT_INTENSITY;
-+	ezxbl_set_intensity(ezx_backlight_device);
-+	backlight_update_status(ezx_backlight_device);
-+
-+	return 0;
-+}
-+
-+static int ezxbl_remove(struct platform_device *pdev)
-+{
-+	backlight_device_unregister(ezx_backlight_device);
-+	return 0;
-+}
-+
-+static struct platform_driver ezxbl_driver = {
-+	.probe		= ezxbl_probe,
-+	.remove		= ezxbl_remove,
-+	.suspend	= ezxbl_suspend,
-+	.resume		= ezxbl_resume,
-+	.driver		= {
-+		.name		= "ezx-bl",
-+	},
-+};
-+
-+static int __init ezxbl_init(void)
-+{
-+	return platform_driver_register(&ezxbl_driver);
-+}
-+
-+static void __exit ezxbl_exit(void)
-+{
-+ 	platform_driver_unregister(&ezxbl_driver);
-+}
-+
-+module_init(ezxbl_init);
-+module_exit(ezxbl_exit);
-+
-+MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
-+MODULE_DESCRIPTION("Backlight Driver for Motorola A780|E680(i)");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c	2007-08-01 19:39:02.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c	2007-08-01 20:00:56.000000000 -0300
-@@ -65,6 +65,12 @@
- #endif
- EXPORT_SYMBOL(ezx_backlight_power);
- 
-+/* EZX LCD Backlight */
-+static struct platform_device ezxbacklight_device = {
-+	.name		= "ezx-bl",
-+	.id		= -1,
-+};
-+
- /* OHCI Controller */
- static int ezx_ohci_init(struct device *dev)
- {
-@@ -121,6 +127,7 @@
- 
- static struct platform_device *devices[] __initdata = {
- 	&ezxbp_device,
-+	&ezxbacklight_device,
- };
- 
- /* PM */
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch
deleted file mode 100755
index 8e8abcb738..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-bp.patch
+++ /dev/null
@@ -1,338 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c	2007-06-29 01:07:18.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c	2007-08-16 15:52:21.000000000 -0300
-@@ -86,8 +86,40 @@
- 	.init		= ezx_ohci_init,
- };
- 
-+/* BP */
-+static struct resource ezxbp_resources[] = {
-+	[0] = {
-+		.start		= IRQ_GPIO(GPIO_BP_RDY),
-+		.end		= IRQ_GPIO(GPIO_BP_RDY),
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+	[1] = {
-+		.start		= IRQ_GPIO(GPIO_BB_WDI2),
-+		.end		= IRQ_GPIO(GPIO_BB_WDI2),
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+	[2] = {
-+		.start		= IRQ_GPIO(GPIO_BB_WDI),
-+		.end		= IRQ_GPIO(GPIO_BB_WDI),
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device ezxbp_device = {
-+	.name		= "ezx-bp",
-+	.dev		= {
-+		//.parent		=
-+		//.platform_data	=
-+	},
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(ezxbp_resources),
-+	.resource	= ezxbp_resources,
-+};
-+
-+
- 
- static struct platform_device *devices[] __initdata = {
-+	&ezxbp_device,
- };
- 
- static int __init ezx_init(void)
-Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig	2007-06-29 01:07:18.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig	2007-08-16 15:52:20.000000000 -0300
-@@ -102,6 +102,9 @@
- 
- endchoice
- 
-+config EZX_BP
-+	bool "BP Control code for EZX Platform"
-+
- endif
- 
- endmenu
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-bp.c	2007-08-16 15:52:43.000000000 -0300
-@@ -0,0 +1,262 @@
-+/*
-+ *  BP handshake code for Motorola EZX phones
-+ *
-+ *  Copyright (c) 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ *
-+ *  Based on Motorola's a780.c Copyright (c) 2003-2005 Motorola
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach/irq.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#include <asm/arch/ezx.h>
-+
-+/* BP Handshake */
-+#define FIRST_STEP              2
-+#define LAST_STEP               3
-+#define BP_RDY_TIMEOUT          0x000c0000
-+
-+#if 1
-+#define DEBUGP(x, args ...)	printk(x, ##args)
-+#else
-+#define DEBUGP(x, args ...)
-+#endif
-+
-+struct bp {
-+	int irq_wdi;
-+	int irq_wdi2;
-+	int irq_rdy;
-+};
-+
-+/* check power down condition */
-+static inline void check_power_off(void)
-+{
-+	if (pxa_gpio_get_value(GPIO_BB_WDI2) == 0) {
-+		DEBUGP("BP request poweroff!\n");
-+		/*
-+		 * It is correct to power off here, the following line is
-+		 * commented out because e680 lowers WDI2 when BP is in
-+		 * flash mode, otherwise WDI2 is used to detect low
-+		 * battery. You can safely uncomment this line if you are
-+		 * using this kernel with BP in normal mode.
-+		 */
-+#ifndef CONFIG_PXA_EZX_E680
-+		pm_power_off();
-+#endif
-+	}
-+}
-+
-+static int step = FIRST_STEP;
-+
-+inline int bp_handshake_passed(void)
-+{
-+	return (step > LAST_STEP);
-+}
-+EXPORT_SYMBOL(bp_handshake_passed);
-+
-+void handshake(void)
-+{
-+        /* step 1: check MCU_INT_SW or BP_RDY is low (now it is checked in apboot) */
-+	DEBUGP("bp handshake entered!\n");
-+        if (step == 1) {
-+                int timeout = BP_RDY_TIMEOUT;
-+
-+                /* config MCU_INT_SW, BP_RDY as input */
-+		pxa_gpio_mode(GPIO_MCU_INT_SW | GPIO_IN);
-+		pxa_gpio_mode(GPIO_BP_RDY | GPIO_IN);
-+
-+                while (timeout--) {
-+                        if (pxa_gpio_get_value(GPIO_MCU_INT_SW) == 0
-+                                || pxa_gpio_get_value(GPIO_BP_RDY) == 0) {
-+                                step ++;
-+                                break;
-+                        }
-+
-+                        check_power_off();
-+                }
-+		DEBUGP("ezx-bp: handshake step 1\n");
-+        }
-+
-+        /* step 2: wait BP_RDY is low */
-+        if (step == 2) {
-+                if (pxa_gpio_get_value(GPIO_BP_RDY) == 0) {
-+                        /* config MCU_INT_SW as output */
-+                        pxa_gpio_mode(GPIO_MCU_INT_SW | GPIO_OUT);
-+                        pxa_gpio_set_value(GPIO_MCU_INT_SW, 0);
-+
-+                        step ++;
-+			DEBUGP("ezx-bp: handshake step 2\n");
-+                }
-+        }
-+
-+        /* step 3: wait BP_RDY is high */
-+        else if (step == 3) {
-+                if (pxa_gpio_get_value(GPIO_BP_RDY)) {
-+                        step ++;
-+                        //FIXME delay_bklight();
-+                        pxa_gpio_set_value(GPIO_MCU_INT_SW, 1);
-+			printk(KERN_NOTICE "ezx-bp: handshake passed\n");
-+                }
-+        }
-+}
-+
-+irqreturn_t bp_wdi_handler(int irq, void *dev_id)
-+{
-+	DEBUGP("BP Lowered WDI line. This is not good :(\n");
-+	/*
-+	 * this means that BP is not responsive.
-+	 * we could try to reset BP and then handshake again
-+	 * but i doubt its possible to bring it up again.
-+	 */
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t bp_rdy_handler(int irq, void *dev_id)
-+{
-+	struct bp *bp = dev_id;
-+	DEBUGP("BP rdy irq\n");
-+	if (!bp_handshake_passed()) {
-+		handshake();
-+		if (bp_handshake_passed()) {
-+		/* FIXME: (test) try to not disable irq_wdi2 and drain battery */
-+			disable_irq(bp->irq_wdi2);
-+
-+			/* set bp_rdy handle for usb ipc */
-+			set_irq_type(bp->irq_rdy, IRQT_FALLING);
-+	       	}
-+	}
-+#ifdef CONFIG_TS0710_MUX_USB
-+	else usb_send_readurb();
-+#endif
-+	return IRQ_HANDLED;
-+}
-+
-+/* BP request for poweroff */
-+static irqreturn_t bp_wdi2_handler(int irq, void *dev_id)
-+{
-+	DEBUGP("BP request poweroff!\n");
-+	/* same case as check_power_off() */
-+#ifndef CONFIG_PXA_EZX_E680
-+	pm_power_off();
-+#endif
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init ezxbp_probe(struct platform_device *dev)
-+{
-+	int ret;
-+	struct bp *bp;
-+
-+	bp = kzalloc(sizeof(*bp), GFP_KERNEL);
-+	if (!bp)
-+		return -ENOMEM;
-+
-+	bp->irq_rdy = platform_get_irq(dev, 0);
-+	if(bp->irq_rdy < 0) {
-+		ret = bp->irq_rdy;
-+		goto fail;
-+	}
-+
-+	bp->irq_wdi2 = platform_get_irq(dev, 1);
-+	if(bp->irq_wdi2 < 0) {
-+		ret = bp->irq_wdi2;
-+		goto fail;
-+	}
-+
-+	bp->irq_wdi = platform_get_irq(dev, 2);
-+	if(bp->irq_wdi < 0) {
-+		ret = bp->irq_wdi;
-+		goto fail;
-+	}
-+
-+        set_irq_type(bp->irq_wdi, IRQT_FALLING);
-+        request_irq(bp->irq_wdi, bp_wdi_handler, SA_INTERRUPT,
-+			"bp wdi", bp);
-+
-+        set_irq_type(bp->irq_rdy, IRQT_BOTHEDGE);
-+        request_irq(bp->irq_rdy, bp_rdy_handler, SA_INTERRUPT,
-+			"bp rdy", bp);
-+
-+        set_irq_type(bp->irq_wdi2, IRQT_FALLING);
-+        request_irq(bp->irq_wdi2, bp_wdi2_handler, SA_INTERRUPT,
-+			"bp wdi2", bp);
-+
-+        /* turn on BP */
-+        pxa_gpio_mode(GPIO_BB_RESET|GPIO_OUT);
-+        pxa_gpio_set_value(GPIO_BB_RESET, 1);
-+
-+        check_power_off();
-+        handshake();
-+
-+	return 0;
-+fail:
-+	kfree(bp);
-+	return ret;
-+}
-+
-+static int ezxbp_remove(struct platform_device *dev)
-+{
-+	struct bp *bp = platform_get_drvdata(dev);
-+
-+	free_irq(bp->irq_wdi, bp);
-+	free_irq(bp->irq_wdi2, bp);
-+	free_irq(bp->irq_rdy, bp);
-+	kfree(bp);
-+
-+	return 0;
-+}
-+
-+static int ezxbp_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	DEBUGP("bp suspend!\n");
-+//	pxa_gpio_set_value(GPIO_MCU_INT_SW, 0);
-+        return 0;
-+}
-+
-+static int ezxbp_resume(struct platform_device *dev)
-+{
-+	DEBUGP("bp resume!\n");
-+//	pxa_gpio_set_value(GPIO_MCU_INT_SW, 1);
-+        return 0;
-+}
-+static struct platform_driver ezxbp_driver = {
-+	.probe		= ezxbp_probe,
-+	.remove		= ezxbp_remove,
-+#warning FIXME: missing suspend/resume support
-+	.suspend	= ezxbp_suspend,
-+	.resume		= ezxbp_resume,
-+	.driver		= {
-+		.name	= "ezx-bp",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+int __init ezxbp_init(void)
-+{
-+	return platform_driver_register(&ezxbp_driver);
-+}
-+
-+void ezxbp_fini(void)
-+{
-+	return platform_driver_unregister(&ezxbp_driver);
-+}
-+
-+module_init(ezxbp_init);
-+module_exit(ezxbp_fini);
-+
-+MODULE_DESCRIPTION("Motorola BP Control driver");
-+MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>");
-+MODULE_LICENSE("GPL");
-+
-Index: linux-2.6.21/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile	2007-06-29 01:07:18.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Makefile	2007-08-16 15:52:20.000000000 -0300
-@@ -24,6 +24,7 @@
- obj-$(CONFIG_PXA_EZX_E2)	+= ezx-e2.o
- obj-$(CONFIG_PXA_EZX_A1200)	+= ezx-a1200.o
- obj-$(CONFIG_PXA_EZX_E6)	+= ezx-e6.o
-+obj-$(CONFIG_EZX_BP)		+= ezx-bp.o
- 
- # Support for blinky lights
- led-y := leds.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch
deleted file mode 100755
index 711a8a467b..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-core.patch
+++ /dev/null
@@ -1,1016 +0,0 @@
-Index: linux-2.6.21/arch/arm/boot/compressed/head-xscale.S
-===================================================================
---- linux-2.6.21.orig/arch/arm/boot/compressed/head-xscale.S	2007-09-23 13:27:06.000000000 -0300
-+++ linux-2.6.21/arch/arm/boot/compressed/head-xscale.S	2007-09-23 13:27:19.000000000 -0300
-@@ -53,3 +53,6 @@
- 		str	r1, [r0, #0x18]
- #endif
- 
-+#ifdef CONFIG_ARCH_EZX
-+		mov	r7, #MACH_TYPE_EZX
-+#endif
-Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig	2007-09-23 13:27:06.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig	2007-09-23 13:27:19.000000000 -0300
-@@ -37,6 +37,10 @@
- 	bool "Keith und Koep Trizeps4 DIMM-Module"
- 	select PXA27x
- 
-+config PXA_EZX
-+	bool "Motorola EZX Platform"
-+	select PXA_SSP
-+
- endchoice
- 
- if PXA_SHARPSL
-@@ -71,6 +75,35 @@
- 
- endif
- 
-+if PXA_EZX
-+
-+choice
-+	prompt "Select target EZX device"
-+
-+config PXA_EZX_E680
-+	bool "Motorola E680 GSM Phone"
-+	select PXA27x
-+
-+config PXA_EZX_A780
-+	bool "Motorola A780 GSM Phone"
-+	select PXA27x
-+
-+config PXA_EZX_E2
-+	bool "Motorola E2 GSM Phone"
-+	select PXA27x
-+
-+config PXA_EZX_A1200
-+	bool "Motorola A1200 GSM Phone"
-+	select PXA27x
-+
-+config PXA_EZX_E6
-+	bool "Motorola E6 GSM Phone"
-+	select PXA27x
-+
-+endchoice
-+
-+endif
-+
- endmenu
- 
- config MACH_POODLE
-@@ -144,4 +177,5 @@
- 	tristate
- 	help
- 	  Enable support for PXA2xx SSP ports
-+
- endif
-Index: linux-2.6.21/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile	2007-09-23 13:27:06.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Makefile	2007-09-23 13:27:19.000000000 -0300
-@@ -18,6 +18,12 @@
- obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
- obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
- obj-$(CONFIG_MACH_TOSA)         += tosa.o
-+obj-$(CONFIG_PXA_EZX)		+= ezx.o
-+obj-$(CONFIG_PXA_EZX_A780)	+= ezx-a780.o
-+obj-$(CONFIG_PXA_EZX_E680)	+= ezx-e680.o
-+obj-$(CONFIG_PXA_EZX_E2)	+= ezx-e2.o
-+obj-$(CONFIG_PXA_EZX_A1200)	+= ezx-a1200.o
-+obj-$(CONFIG_PXA_EZX_E6)	+= ezx-e6.o
- 
- # Support for blinky lights
- led-y := leds.o
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,118 @@
-+/*
-+ *  ezx.c - Common code for EZX platform.
-+ *
-+ *  Copyright (c) 2005-2007 OpenEZX Team (www.openezx.org)
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ohci.h>
-+#include <asm/arch/ezx.h>
-+
-+#include "generic.h"
-+
-+/* EZX PXA Framebuffer */
-+void ezx_lcd_power(int on, struct fb_var_screeninfo *var)
-+{
-+	if (on) {
-+		mdelay(1);
-+		GPSR3 = 0x00100000;
-+		mdelay(10);
-+		GPCR3 = 0x00100000;
-+		GPDR3 |= 0x00100000;
-+	} else {
-+		GPSR3 = 0x00100000;
-+		PGSR3 |= 0x00100000;
-+		mdelay(41);
-+		LCCR0 &= ~LCCR0_LDM;	/* disable lcd disable done interrupt */
-+		LCCR0 |= LCCR0_DIS;	/* normal disable lcd */
-+		mdelay(18);
-+	}
-+}
-+EXPORT_SYMBOL(ezx_lcd_power);
-+
-+/* failsafe if we are not using the backlight platform driver */
-+#ifndef CONFIG_BACKLIGHT_EZX
-+void ezx_backlight_power(int on)
-+{
-+       if (on) {
-+               pxa_gpio_mode(GPIO16_PWM0_MD);
-+               pxa_set_cken(CKEN0_PWM0, 1);
-+               PWM_CTRL0 = 0;
-+               PWM_PWDUTY0 = 0x3ff;
-+               PWM_PERVAL0 = 0x3ff;
-+       } else {
-+               PWM_CTRL0 = 0;
-+               PWM_PWDUTY0 = 0x0;
-+               PWM_PERVAL0 = 0x3FF;
-+               pxa_set_cken(CKEN0_PWM0, 0);
-+       }
-+}
-+#else
-+void ezx_backlight_power(int on){}
-+#endif
-+EXPORT_SYMBOL(ezx_backlight_power);
-+
-+/* OHCI Controller */
-+static int ezx_ohci_init(struct device *dev)
-+{
-+	/* for A780 support (connected with Neptune) */
-+	pxa_gpio_mode(GPIO30_USB_P3_2);	/* GPIO30 - USB_P3_2/ICL_TXENB */
-+	pxa_gpio_mode(GPIO31_USB_P3_6);	/* GPIO31 - USB_P3_6/ICL_VPOUT */
-+	pxa_gpio_mode(GPIO90_USB_P3_5);	/* GPIO90 - USB_P3_5/ICL_VPIN */
-+	pxa_gpio_mode(GPIO91_USB_P3_1);	/* GPIO91 - USB_P3_1/ICL_XRXD */
-+	pxa_gpio_mode(GPIO56_USB_P3_4);	/* GPIO56 - USB_P3_4/ICL_VMOUT */
-+	pxa_gpio_mode(GPIO113_USB_P3_3);/* GPIO113 - USB_P3_3/ICL_VMIN */
-+	UP3OCR = 0x00000002;
-+
-+	UHCHR = UHCHR & ~(UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-+
-+	return 0;
-+}
-+
-+static struct pxaohci_platform_data ezx_ohci_platform_data = {
-+	.port_mode	= PMM_NPS_MODE,
-+	.init		= ezx_ohci_init,
-+};
-+
-+
-+static struct platform_device *devices[] __initdata = {
-+};
-+
-+static int __init ezx_init(void)
-+{
-+	CKEN = CKEN9_OSTIMER | CKEN22_MEMC;
-+
-+	pxa_gpio_mode(GPIO_ICL_FFRXD_MD);
-+	pxa_gpio_mode(GPIO_ICL_FFTXD_MD);
-+	pxa_gpio_mode(GPIO_ICL_FFCTS_MD);
-+	pxa_gpio_mode(GPIO_ICL_FFRTS_MD);
-+
-+	pxa_gpio_mode(GPIO42_BTRXD_MD);
-+	pxa_gpio_mode(GPIO43_BTTXD_MD);
-+	pxa_gpio_mode(GPIO44_BTCTS_MD);
-+	pxa_gpio_mode(GPIO45_BTRTS_MD);
-+
-+	/* Standard UART */
-+	pxa_gpio_mode(GPIO46_STRXD_MD);
-+	pxa_gpio_mode(GPIO47_STTXD_MD);
-+
-+	pxa_set_ohci_info(&ezx_ohci_platform_data);
-+
-+	platform_add_devices(devices, ARRAY_SIZE(devices));
-+
-+	return 0;
-+}
-+
-+subsys_initcall(ezx_init);
-Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/include/asm-arm/arch-pxa/ezx.h	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,225 @@
-+/*
-+ *  linux/include/asm-arm/arch-pxa/ezx.h
-+ *
-+ *  Specific macro defines for Motorola Ezx Development Platform
-+ *
-+ *  Author:     Zhuang Xiaofan
-+ *  Created:    Nov 25, 2003
-+ *  Copyright:  Motorola Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/* support E680 p3 and ealier PCB */
-+//#define   E680_P3_AND_EARLY
-+
-+#define GPIO_is_high(x) (GPLR(x) & GPIO_bit(x))
-+#define set_GPIO(x) (GPSR(x) = GPIO_bit(x))
-+#define clr_GPIO(x) (GPCR(x) = GPIO_bit(x))
-+
-+/*
-+ * Flags in memory for sleep use
-+ */
-+#define FLAG_ADDR       PHYS_OFFSET
-+#define RESUME_ADDR     (PHYS_OFFSET + 4)
-+#define BPSIG_ADDR      (PHYS_OFFSET + 8)
-+
-+#define USER_OFF_FLAG   0x5a5a5a5a
-+#define SLEEP_FLAG      0x6b6b6b6b
-+#define OFF_FLAG        0x7c7c7c7c
-+#define REFLASH_FLAG    0x0C1D2E3F
-+#define PASS_THRU_FLAG	0x12345678
-+
-+#define WDI_FLAG        0xbb00dead
-+#define NO_FLAG         0xaa00dead
-+
-+/*
-+ * GPIO control pin, have to change when hardware lock down
-+ */
-+
-+#ifdef E680_P3_AND_EARLY
-+
-+/* shakehand  with BP's PIN  */
-+#define GPIO_BP_RDY            0       /* BP_RDY     */
-+#define GPIO_BB_WDI            13      /* BB_WDI     */
-+#define GPIO_BB_WDI2           3       /* BB_WDI2    */
-+#define GPIO_BB_RESET          57      /* BB_RESET   */
-+#define GPIO_MCU_INT_SW        115     /* MCU_INT_SW */
-+#define GPIO_TC_MM_EN          89      /* TC_MM_EN   */
-+
-+/* control PCAP direct PIN */
-+#define GPIO_WDI_AP            4       /* WDI_AP                       */
-+#define GPIO_SYS_RESTART       55      /* restart PCAP power           */
-+#define GPIO_AP_STANDBY        28      /* make pcap enter standby mode */
-+
-+/* communicate with PCAP's PIN  */
-+#define GPIO_PCAP_SEC_INT      1       /* PCAP interrupt PIN to AP     */
-+#define GPIO_SPI_CLK           23      /* PCAP SPI port clock          */
-+#define GPIO_SPI_CE            24      /* PCAP SPI port SSPFRM         */
-+#define GPIO_SPI_MOSI          25      /* PCAP SPI port SSPTXD         */
-+#define GPIO_SPI_MISO          26      /* PCAP SPI port SSPRXD         */
-+
-+/*  blue tooth control PIN   */
-+#define GPIO_BT_WAKEUP         2       /* AP wake up bluetooth module        */
-+#define GPIO_BT_HOSTWAKE       14      /* bluetooth module wake up Ap module */
-+#define GPIO_BT_RESET          56      /* AP reset bluetooth module          */
-+
-+/* control LCD high - OFF low -- ON  */
-+#define GPIO_LCD_OFF           116     /* control LCD                */
-+
-+/*  FFUART PIN              */
-+#define GPIO_ICL_FFRXD_MD      (34 | GPIO_ALT_FN_1_IN)
-+#define GPIO_ICL_FFCTS_MD      (35 | GPIO_ALT_FN_1_IN)
-+#define GPIO_ICL_FFTXD_MD      (39 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_ICL_FFRTS_MD      (41 | GPIO_ALT_FN_2_OUT)
-+
-+#elif defined(A780_P1_AND_EARLY)
-+
-+/* shakehand  with BP's PIN  */
-+#define GPIO_BP_RDY            0       /* BP_RDY     */
-+#define GPIO_BB_WDI            13      /* BB_WDI     */
-+#define GPIO_BB_WDI2           3       /* BB_WDI2    */
-+#define GPIO_BB_RESET          82      /* BB_RESET   */
-+#define GPIO_MCU_INT_SW        57      /* MCU_INT_SW */
-+#define GPIO_TC_MM_EN          89      /* TC_MM_EN   */
-+
-+/* control PCAP direct PIN */
-+#define GPIO_WDI_AP            4       /* WDI_AP                       */
-+#define GPIO_SYS_RESTART       55      /* restart PCAP power           */
-+#define GPIO_AP_STANDBY        28      /* make pcap enter standby mode */
-+
-+/* communicate with PCAP's PIN  */
-+#define GPIO_PCAP_SEC_INT      1       /* PCAP interrupt PIN to AP     */
-+#define GPIO_SPI_CLK           29      /* PCAP SPI port clock          */
-+#define GPIO_SPI_CE            24      /* PCAP SPI port SSPFRM         */
-+#define GPIO_SPI_MOSI          25      /* PCAP SPI port SSPTXD         */
-+#define GPIO_SPI_MISO          26      /* PCAP SPI port SSPRXD         */
-+
-+/*  blue tooth control PIN   */
-+#define GPIO_BT_WAKEUP         2       /* AP wake up bluetooth module        */
-+#define GPIO_BT_HOSTWAKE       14      /* bluetooth module wake up Ap module */
-+#define GPIO_BT_RESET          56      /* AP reset bluetooth module          */
-+
-+/* control LCD high - OFF low -- ON  */
-+#define GPIO_LCD_OFF           116     /* control LCD                */
-+
-+/*  FFUART PIN              */
-+#define GPIO_ICL_FFRXD_MD      (53 | GPIO_ALT_FN_1_IN)
-+#define GPIO_ICL_FFCTS_MD      (35 | GPIO_ALT_FN_1_IN)
-+#define GPIO_ICL_FFTXD_MD      (39 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_ICL_FFRTS_MD      (41 | GPIO_ALT_FN_2_OUT)
-+
-+#else
-+
-+/* shakehand  with BP's PIN  */
-+#define GPIO_BP_RDY            0       /* BP_RDY     */
-+#define GPIO_BB_WDI            13      /* BB_WDI     */
-+#define GPIO_BB_WDI2           3       /* BB_WDI2    */
-+#define GPIO_BB_RESET          82      /* BB_RESET   */
-+#define GPIO_MCU_INT_SW        57      /* MCU_INT_SW */
-+#define GPIO_TC_MM_EN          99      /* TC_MM_EN   */
-+
-+/* control PCAP direct PIN */
-+#define GPIO_WDI_AP            4       /* WDI_AP                       */
-+#define GPIO_SYS_RESTART       55      /* restart PCAP power           */
-+//#define GPIO_AP_STANDBY        28      /* make pcap enter standby mode */
-+
-+/* communicate with PCAP's PIN  */
-+#define GPIO_PCAP_SEC_INT      1       /* PCAP interrupt PIN to AP     */
-+#define GPIO_SPI_CLK           29      /* PCAP SPI port clock          */
-+#define GPIO_SPI_CE            24      /* PCAP SPI port SSPFRM         */
-+#define GPIO_SPI_MOSI          25      /* PCAP SPI port SSPTXD         */
-+#define GPIO_SPI_MISO          26      /* PCAP SPI port SSPRXD         */
-+
-+/*  blue tooth control PIN   */
-+#define GPIO_BT_WAKEUP         28      /* AP wake up bluetooth module  */
-+#define GPIO_BT_HOSTWAKE       14      /* AP wake up bluetooth module  */
-+#define GPIO_BT_RESET          48      /* AP reset bluetooth module    */
-+
-+/* control LCD high - OFF low -- ON  */
-+#define GPIO_LCD_OFF           116     /* control LCD                */
-+
-+/*  FFUART PIN              */
-+#define GPIO_ICL_FFRXD_MD      (53 | GPIO_ALT_FN_1_IN)
-+#define GPIO_ICL_FFCTS_MD      (35 | GPIO_ALT_FN_1_IN)
-+#define GPIO_ICL_FFTXD_MD      (39 | GPIO_ALT_FN_2_OUT)
-+#define GPIO_ICL_FFRTS_MD      (41 | GPIO_ALT_FN_2_OUT)
-+
-+#endif
-+/*
-+ * ezx platform, wake up source edge detect bit
-+ */
-+#define PEDR_INT_SEC            1
-+
-+#define GPIO_FLIP_PIN          12
-+/*E680 screen lock button*/
-+
-+#define GPIO_LOCK_SCREEN_PIN    GPIO_FLIP_PIN
-+
-+/* MMC interface */
-+#define GPIO_MMC_DETECT         11
-+#define GPIO_MMC_CLK            32
-+#define GPIO_MMC_DATA0          92
-+#define GPIO_MMC_WP		107
-+#define GPIO_MMC_DATA1          109
-+#define GPIO_MMC_DATA2          110
-+#define GPIO_MMC_DATA3          111
-+#define GPIO_MMC_CMD            112
-+
-+/* interface function */
-+#define GPIO_MMC_CLK_MD         (GPIO_MMC_CLK | GPIO_ALT_FN_2_OUT)
-+#define GPIO_MMC_DATA0_MD       (GPIO_MMC_DATA0 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
-+#define GPIO_MMC_DATA1_MD       (GPIO_MMC_DATA1 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
-+#define GPIO_MMC_DATA2_MD       (GPIO_MMC_DATA2 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
-+#define GPIO_MMC_DATA3_MD       (GPIO_MMC_DATA3 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
-+
-+#define GPIO_MMC_CMD_MD         (GPIO_MMC_CMD | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
-+
-+/* EMU GPIO 119 ---MUX2 120 --- MUX1   */
-+#define GPIO_EMU_MUX1      120
-+#define GPIO_EMU_MUX2      119
-+#define GPIO_SNP_INT_CTL   86
-+#define GPIO_SNP_INT_IN    87
-+
-+
-+/* audio related pins  */
-+#define AP_13MHZ_OUTPUT_PIN  9
-+
-+#ifdef CONFIG_ARCH_EZX_E680
-+#define GPIO_VA_SEL_BUL     79
-+#define GPIO_FLT_SEL_BUL    80		/* out filter select pin */
-+#define GPIO_MIDI_RESET    78		/* GPIO used by MIDI chipset */
-+#define GPIO_MIDI_CS       33
-+#define GPIO_MIDI_IRQ      15
-+#define GPIO_MIDI_NPWE     49
-+#define GPIO_MIDI_RDY      18
-+#endif
-+
-+#ifdef CONFIG_ARCH_EZX_A780
-+#define GPIO_HW_ATTENUATE_A780	96	/* hw noise attenuation be used or bypassed, for receiver or louderspeaker mode */
-+#endif
-+
-+
-+/* bp status pin */
-+#define GPIO_BP_STATE       41
-+
-+/* define usb related pin  */
-+#define GPIO34_TXENB        34
-+#define GPIO35_XRXD         35
-+#define GPIO36_VMOUT        36
-+#define GPIO39_VPOUT        39
-+#define GPIO40_VPIN         40
-+#define GPIO53_VMIN         53
-+
-+/* USB client 6 pin defination */
-+#define GPIO34_TXENB_MD     (GPIO34_TXENB | GPIO_ALT_FN_1_OUT)
-+#define GPIO35_XRXD_MD      (GPIO35_XRXD | GPIO_ALT_FN_2_IN )
-+#define GPIO36_VMOUT_MD     (GPIO36_VMOUT | GPIO_ALT_FN_1_OUT)
-+#define GPIO39_VPOUT_MD     (GPIO39_VPOUT | GPIO_ALT_FN_1_OUT)
-+#define GPIO40_VPIN_MD      (GPIO40_VPIN | GPIO_ALT_FN_3_IN )
-+#define GPIO53_VMIN_MD      (GPIO53_VMIN | GPIO_ALT_FN_2_IN )
-+
-+#define GPIO53_FFRXD_MD     (53 | GPIO_ALT_FN_1_IN)
-+
-Index: linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/pxa-regs.h	2007-09-23 13:27:13.000000000 -0300
-+++ linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h	2007-09-23 13:27:19.000000000 -0300
-@@ -856,6 +856,8 @@
- #define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
- #define UP2OCR_SEOS		(1 << 24)	/* Single-Ended Output Select */
- 
-+#define UP3OCR		__REG(0x40600024)  /* USB Port 3 Output Control register */
-+
- #define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
- #define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
- #define UDCCSR0_SA	(1 << 7)	/* Setup Active */
-@@ -1259,6 +1261,7 @@
- #define GPIO33_nCS_5		33	/* chip select 5 */
- #define GPIO34_FFRXD		34	/* FFUART receive */
- #define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
-+#define GPIO34_USB_P2_2		34	/* USB Port2 Pin 2 */
- #define GPIO35_FFCTS		35	/* FFUART Clear to send */
- #define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
- #define GPIO37_FFDSR		37	/* FFUART data set ready */
-@@ -1372,6 +1375,7 @@
- #define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
- #define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
- #define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
-+#define GPIO22_SCLK2_MD		(22 | GPIO_ALT_FN_3_IN)
- #define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
- #define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
- #define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
-@@ -1382,23 +1386,33 @@
- #define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
- #define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
- #define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
-+#define GPIO29_SCLK_MD		(29 | GPIO_ALT_FN_3_IN)
- #define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
- #define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
-+#define GPIO30_USB_P3_2		(30 | GPIO_ALT_FN_3_OUT)
- #define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
- #define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
-+#define GPIO31_USB_P3_6		(31 | GPIO_ALT_FN_3_OUT)
- #define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
- #define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
- #define GPIO32_MMCCLK_MD		( 32 | GPIO_ALT_FN_2_OUT)
- #define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
- #define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
- #define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
-+#define GPIO34_USB_P2_2_MD	(34 | GPIO_ALT_FN_1_OUT)
- #define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
-+#define GPIO35_USB_P2_1_MD	(35 | GPIO_ALT_FN_2_IN)
- #define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
-+#define GPIO36_USB_P2_4_MD	(36 | GPIO_ALT_FN_1_OUT)
- #define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
-+#define GPIO37_SFRM2_MD		(37 | GPIO_ALT_FN_2_IN)
- #define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
-+#define GPIO38_STXD2_MD		(38 | GPIO_ALT_FN_2_OUT)
- #define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
- #define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
-+#define GPIO39_USB_P2_6_MD	(39 | GPIO_ALT_FN_1_OUT)
- #define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
-+#define GPIO40_USB_P2_5_MD	(40 | GPIO_ALT_FN_3_IN)
- #define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
- #define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
- #define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
-@@ -1423,13 +1437,17 @@
- #define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
- #define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
- #define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
-+#define GPIO52_SCLK3_MD		(52 | GPIO_ALT_FN_2_OUT)
- #define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
- #define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
-+#define GPIO53_FFRXD_MD		(53 | GPIO_ALT_FN_1_IN)
-+#define GPIO53_USB_P2_3_MD	(53 | GPIO_ALT_FN_2_IN)
- #define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
- #define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
- #define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
- #define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
- #define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
-+#define GPIO56_USB_P3_4		(56 | GPIO_ALT_FN_1_OUT)
- #define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
- #define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
- #define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
-@@ -1465,13 +1483,19 @@
- #define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
- #define GPIO81_NSSP_CLK_OUT 	(81 | GPIO_ALT_FN_1_OUT)
- #define GPIO81_NSSP_CLK_IN  	(81 | GPIO_ALT_FN_1_IN)
-+#define GPIO81_STXD3_MD		(81 | GPIO_ALT_FN_1_OUT)
- #define GPIO82_NSSP_FRM_OUT 	(82 | GPIO_ALT_FN_1_OUT)
- #define GPIO82_NSSP_FRM_IN  	(82 | GPIO_ALT_FN_1_IN)
- #define GPIO83_NSSP_TX      	(83 | GPIO_ALT_FN_1_OUT)
- #define GPIO83_NSSP_RX      	(83 | GPIO_ALT_FN_2_IN)
-+#define GPIO83_SFRM3_MD		(83 | GPIO_ALT_FN_1_IN)
- #define GPIO84_NSSP_TX      	(84 | GPIO_ALT_FN_1_OUT)
- #define GPIO84_NSSP_RX      	(84 | GPIO_ALT_FN_2_IN)
- #define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
-+#define GPIO88_SRXD2_MD		(88 | GPIO_ALT_FN_2_IN)
-+#define GPIO89_SRXD3_MD		(89 | GPIO_ALT_FN_1_IN)
-+#define GPIO90_USB_P3_5		(90 | GPIO_ALT_FN_2_IN)
-+#define GPIO91_USB_P3_1		(91 | GPIO_ALT_FN_2_IN)
- #define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
- #define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
- #define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
-@@ -1483,6 +1507,7 @@
- #define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
- #define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
- #define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
-+#define GPIO113_USB_P3_3	(113 | GPIO_ALT_FN_3_IN)
- #define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
- #define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
- 
-@@ -1498,6 +1523,7 @@
- #define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
- #define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
- #define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-+#define PGSR(x)		(__REG(0x40F00020 + ((unsigned long)(x)/32*4)))
- #define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
- #define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
- #define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-Index: linux-2.6.21/arch/arm/boot/compressed/head.S
-===================================================================
---- linux-2.6.21.orig/arch/arm/boot/compressed/head.S	2007-09-23 13:27:06.000000000 -0300
-+++ linux-2.6.21/arch/arm/boot/compressed/head.S	2007-09-23 13:27:19.000000000 -0300
-@@ -117,6 +117,9 @@
- 		mov	r0, r0
- 		.endr
- 
-+		mov     r1, #0x300              @ mach_id 0x363 is official EZX
-+		orr     r1, r1, #0x63           @ bootloader JUMP doesn't set r1
-+
- 		b	1f
- 		.word	0x016f2818		@ Magic numbers to help the loader
- 		.word	start			@ absolute load/run zImage address
-Index: linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/uncompress.h	2007-09-23 13:27:06.000000000 -0300
-+++ linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h	2007-09-23 13:27:19.000000000 -0300
-@@ -14,14 +14,14 @@
- #define STUART		((volatile unsigned long *)0x40700000)
- #define HWUART		((volatile unsigned long *)0x41600000)
- 
--#define UART		FFUART
-+#define UART		STUART
- 
- 
- static inline void putc(char c)
- {
--	while (!(UART[5] & 0x20))
-+/*	while (!(UART[5] & 0x40))
- 		barrier();
--	UART[0] = c;
-+	UART[0] = c;*/
- }
- 
- /*
-Index: linux-2.6.21/arch/arm/mm/init.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mm/init.c	2007-09-23 13:27:07.000000000 -0300
-+++ linux-2.6.21/arch/arm/mm/init.c	2007-09-23 13:27:19.000000000 -0300
-@@ -241,6 +241,10 @@
- 	 */
- 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
- 			     boot_pages << PAGE_SHIFT);
-+#ifdef CONFIG_PXA_EZX
-+	/* reserve the first page memory for exiting sleep and user off */
-+	reserve_bootmem_node(pgdat, PHYS_OFFSET, PAGE_SIZE);
-+#endif
- 
- #ifdef CONFIG_BLK_DEV_INITRD
- 	/*
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,88 @@
-+/*
-+ *  ezx-a780.c - Code specific to A780 GSM Phone.
-+ *
-+ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/ezx.h>
-+
-+#include "generic.h"
-+
-+extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
-+extern void ezx_backlight_power(int);
-+
-+static struct pxafb_mode_info mode_a780 = {
-+	.pixclock	= 150000,
-+	.xres		= 240,
-+	.yres		= 320,
-+	.bpp		= 16,
-+	.hsync_len	= 10,
-+	.left_margin	= 20,
-+	.right_margin	= 10,
-+	.vsync_len	= 2,
-+	.upper_margin	= 3,
-+	.lower_margin	= 2,
-+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info a780_fb_info = {
-+	.modes		= &mode_a780,
-+	.num_modes	= 1,
-+	.lccr0		= 0x002008F8,
-+	.lccr3		= 0x0430FF09,
-+	.pxafb_backlight_power = &ezx_backlight_power,
-+	.pxafb_lcd_power = &ezx_lcd_power,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+};
-+
-+static void __init a780_init(void)
-+{
-+	/* setup sleep mode values */
-+	PWER  = 0xc0007803;		// disable usb, GPIO15 NC
-+	PFER  = 0x00007803;
-+	PRER  = 0x00001802;
-+	PGSR0 = 0x00000010;
-+	PGSR1 = 0x02800000;
-+	PGSR2 = 0x00040000;
-+	PGSR3 = 0x00000008;
-+	PCFR  = PCFR_DC_EN | PCFR_FS | PCFR_FP | PCFR_OPDE;
-+	PSLR  = 0x05800f00;
-+
-+	set_pxa_fb_info(&a780_fb_info);
-+
-+        /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
-+	pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
-+        clr_GPIO(GPIO_EMU_MUX1);
-+	pxa_gpio_mode(GPIO_EMU_MUX2|GPIO_OUT);
-+        clr_GPIO(GPIO_EMU_MUX2);
-+
-+        platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(EZX, "Motorola Ezx Platform")
-+	/* Maintainer: OpenEZX Team (www.openezx.org) */
-+	.phys_io 	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000100,
-+	.map_io		= pxa_map_io,
-+	.init_irq	= pxa_init_irq,
-+	.timer		= &pxa_timer,
-+	.init_machine	= a780_init,
-+MACHINE_END
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e2.c	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,70 @@
-+/*
-+ *  ezx-e2.c - Code specific to E2 GSM Phone.
-+ *
-+ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/ezx.h>
-+
-+#include "generic.h"
-+
-+extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
-+extern void ezx_backlight_power(int);
-+
-+static struct pxafb_mode_info mode_e2 = {
-+       .pixclock = 192308,
-+       .xres = 240,
-+       .yres = 320,
-+       .bpp = 8,
-+       .hsync_len = 10,
-+       .left_margin = 20,
-+       .right_margin = 10,
-+       .vsync_len = 2,
-+       .upper_margin = 3,
-+       .lower_margin = 2,
-+       .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info e2_fb_info = {
-+       .modes = &mode_e2,
-+       .num_modes = 1,
-+       .lccr0 = 0x022008B8,
-+       .lccr3 = 0xC130FF13,
-+       .pxafb_backlight_power = &ezx_backlight_power,
-+       .pxafb_lcd_power = &ezx_lcd_power,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+};
-+
-+static void __init e2_init(void)
-+{
-+	set_pxa_fb_info(&e2_fb_info);
-+
-+	platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(EZX, "Motorola Ezx Platform")
-+	/* Maintainer: OpenEZX Team (www.openezx.org) */
-+	.phys_io 	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000200,
-+	.map_io		= pxa_map_io,
-+	.init_irq	= pxa_init_irq,
-+	.timer		= &pxa_timer,
-+	.init_machine	= e2_init,
-+MACHINE_END
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,87 @@
-+/*
-+ *  ezx-e680.c - Code specific to E680 GSM Phone.
-+ *
-+ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/ezx.h>
-+
-+#include "generic.h"
-+
-+extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
-+extern void ezx_backlight_power(int);
-+
-+static struct pxafb_mode_info mode_e680 = {
-+	.pixclock	= 150000,
-+	.xres		= 240,
-+	.yres		= 320,
-+	.bpp		= 16,
-+	.hsync_len	= 10,
-+	.left_margin	= 20,
-+	.right_margin	= 10,
-+	.vsync_len	= 2,
-+	.upper_margin	= 3,
-+	.lower_margin	= 2,
-+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info e680_fb_info = {
-+	.modes		= &mode_e680,
-+	.num_modes	= 1,
-+	.lccr0		= 0x002008F8,
-+	.lccr3		= 0x0430FF09,
-+	.pxafb_backlight_power = &ezx_backlight_power,
-+	.pxafb_lcd_power = &ezx_lcd_power,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+};
-+
-+static void __init e680_init(void)
-+{
-+	/* setup sleep mode values */
-+	PWER  = 0xc000f803;		// disable usb 0xdc00f803;
-+	PFER  = 0x0000f803;
-+	PRER  = 0x00001802;
-+	PGSR0 = 0x00000010;
-+	PGSR1 = 0x02800000;
-+	PGSR2 = 0x00040000;
-+	PGSR3 = 0x00000000;
-+	PCFR  = PCFR_DC_EN | PCFR_FS | PCFR_FP | PCFR_OPDE;
-+	PSLR  = 0x05800f00;
-+
-+	set_pxa_fb_info(&e680_fb_info);
-+
-+        /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
-+	pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
-+        clr_GPIO(GPIO_EMU_MUX1);
-+	pxa_gpio_mode(GPIO_EMU_MUX2|GPIO_OUT);
-+        clr_GPIO(GPIO_EMU_MUX2);
-+
-+	platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(EZX, "Motorola Ezx Platform")
-+	/* Maintainer: OpenEZX Team (www.openezx.org) */
-+	.phys_io 	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000100,
-+	.map_io		= pxa_map_io,
-+	.init_irq	= pxa_init_irq,
-+	.timer		= &pxa_timer,
-+	.init_machine	= e680_init,
-+MACHINE_END
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,70 @@
-+/*
-+ *  ezx-a1200.c - Code specific to A1200 GSM Phone.
-+ *
-+ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/ezx.h>
-+
-+#include "generic.h"
-+
-+extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
-+extern void ezx_backlight_power(int);
-+
-+static struct pxafb_mode_info mode_a1200 = {
-+       .pixclock = 192308,
-+       .xres = 240,
-+       .yres = 320,
-+       .bpp = 8,
-+       .hsync_len = 10,
-+       .left_margin = 20,
-+       .right_margin = 10,
-+       .vsync_len = 2,
-+       .upper_margin = 3,
-+       .lower_margin = 2,
-+       .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info a1200_fb_info = {
-+       .modes = &mode_a1200,
-+       .num_modes = 1,
-+       .lccr0 = 0x022008B8,
-+       .lccr3 = 0xC130FF13,
-+       .pxafb_backlight_power = &ezx_backlight_power,
-+       .pxafb_lcd_power = &ezx_lcd_power,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+};
-+
-+static void __init a1200_init(void)
-+{
-+	set_pxa_fb_info(&a1200_fb_info);
-+
-+	platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(EZX, "Motorola Ezx Platform")
-+	/* Maintainer: OpenEZX Team (www.openezx.org) */
-+	.phys_io 	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000200,
-+	.map_io		= pxa_map_io,
-+	.init_irq	= pxa_init_irq,
-+	.timer		= &pxa_timer,
-+	.init_machine	= a1200_init,
-+MACHINE_END
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c	2007-09-23 13:27:19.000000000 -0300
-@@ -0,0 +1,70 @@
-+/*
-+ *  ezx-e6.c - Code specific to E6 GSM Phone.
-+ *
-+ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/ezx.h>
-+
-+#include "generic.h"
-+
-+extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
-+extern void ezx_backlight_power(int);
-+
-+static struct pxafb_mode_info mode_e6 = {
-+       .pixclock = 192308,
-+       .xres = 240,
-+       .yres = 320,
-+       .bpp = 8,
-+       .hsync_len = 10,
-+       .left_margin = 20,
-+       .right_margin = 10,
-+       .vsync_len = 2,
-+       .upper_margin = 3,
-+       .lower_margin = 2,
-+       .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info e6_fb_info = {
-+       .modes = &mode_e6,
-+       .num_modes = 1,
-+       .lccr0 = 0x022008B8,
-+       .lccr3 = 0xC130FF13,
-+       .pxafb_backlight_power = &ezx_backlight_power,
-+       .pxafb_lcd_power = &ezx_lcd_power,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+};
-+
-+static void __init e6_init(void)
-+{
-+	set_pxa_fb_info(&e6_fb_info);
-+
-+	platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(EZX, "Motorola Ezx Platform")
-+	/* Maintainer: OpenEZX Team (www.openezx.org) */
-+	.phys_io 	= 0x40000000,
-+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-+	.boot_params	= 0xa0000200,
-+	.map_io		= pxa_map_io,
-+	.init_irq	= pxa_init_irq,
-+	.timer		= &pxa_timer,
-+	.init_machine	= e6_init,
-+MACHINE_END
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch
deleted file mode 100755
index 01ab60d9ec..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-emu.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-emu.c	2007-09-07 15:27:23.000000000 -0300
-@@ -0,0 +1,219 @@
-+/*
-+ *  EMU Driver for Motorola EZX phones
-+ *
-+ *  Copyright (c) 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx.h>
-+#include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/udc.h>
-+
-+static struct pxa2xx_udc_mach_info ezx_udc_info;
-+extern int ezx_pcap_bit_set(u_int32_t, u_int8_t);
-+extern int ezx_pcap_read_bit(u_int32_t);
-+static int emu_irq_usb4v;
-+static int emu_irq_usb1v;
-+
-+
-+#if defined CONFIG_EZX_EMU_USB
-+#define emu_switch_to_default() emu_switch_to_usb()
-+#elif defined CONFIG_EZX_EMU_UART
-+#define emu_switch_to_default() emu_switch_to_uart()
-+#else
-+#define emu_switch_to_default() emu_switch_to_nothing()
-+#endif
-+
-+void emu_switch_to_usb(void)
-+{
-+	printk(KERN_NOTICE "EMU: Switching to USB\n");
-+	pxa_gpio_mode(GPIO34_USB_P2_2_MD);
-+	pxa_gpio_mode(GPIO35_USB_P2_1_MD);
-+	pxa_gpio_mode(GPIO36_USB_P2_4_MD);
-+	pxa_gpio_mode(GPIO39_USB_P2_6_MD);
-+	pxa_gpio_mode(GPIO40_USB_P2_5_MD);
-+	pxa_gpio_mode(GPIO53_USB_P2_3_MD);
-+	UP2OCR = 0x02000000;
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1);
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_FSENB, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 1);
-+	clr_GPIO(GPIO_EMU_MUX1);
-+	clr_GPIO(GPIO_EMU_MUX2);
-+}
-+
-+void emu_switch_to_uart(void)
-+{
-+	printk(KERN_NOTICE "EMU: Switching to UART\n");
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN,0);
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232_DIR, 1);
-+	set_GPIO(GPIO39_FFTXD);
-+	pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
-+	set_GPIO(GPIO34_TXENB);
-+	pxa_gpio_mode(GPIO35_XRXD | GPIO_IN);
-+	pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO40_VPIN | GPIO_IN);
-+	pxa_gpio_mode(GPIO39_FFTXD_MD);
-+	pxa_gpio_mode(GPIO53_FFRXD_MD);
-+	CKEN |= CKEN6_FFUART;
-+	clr_GPIO(GPIO_EMU_MUX1);
-+	clr_GPIO(GPIO_EMU_MUX2);
-+
-+}
-+
-+void emu_switch_to_audio(int stereo)
-+{
-+	printk(KERN_NOTICE "EMU: Switching to audio(%s)\n", (stereo ? "stereo" : "mono"));
-+	clr_GPIO(GPIO39_VPOUT);
-+	if (stereo) {
-+		pxa_gpio_mode(GPIO34_TXENB | GPIO_IN);
-+		clr_GPIO(GPIO39_VPOUT);
-+	} else {
-+		pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
-+		set_GPIO(GPIO34_TXENB);
-+	}
-+
-+	pxa_gpio_mode(GPIO35_XRXD  | GPIO_IN);
-+	pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO40_VPIN  | GPIO_IN);
-+	pxa_gpio_mode(GPIO53_VMIN  | GPIO_IN);
-+	set_GPIO(GPIO_EMU_MUX1);
-+	if (stereo)
-+		set_GPIO(GPIO_EMU_MUX2);
-+	else
-+		clr_GPIO(GPIO_EMU_MUX2);
-+}
-+
-+void emu_switch_to_nothing(void)
-+{
-+	printk(KERN_NOTICE "EMU: Switching to disconnected\n");
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 0);
-+	ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1);
-+	pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
-+	set_GPIO(GPIO34_TXENB);
-+	pxa_gpio_mode(GPIO35_XRXD  | GPIO_IN);
-+	pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO40_VPIN  | GPIO_IN);
-+	pxa_gpio_mode(GPIO53_VMIN  | GPIO_IN);
-+}
-+
-+
-+static irqreturn_t emu_irq(int irq, void *data)
-+{
-+	switch (irq) {
-+	case EZX_IRQ_USB4V:
-+		if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V)))
-+			emu_switch_to_default();
-+		break;
-+	case EZX_IRQ_USB1V:
-+		if(!ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB1V)))
-+			emu_switch_to_nothing();
-+		break;
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init ezx_emu_probe(struct platform_device *dev)
-+{
-+	pxa_gpio_mode(GPIO_SNP_INT_IN | GPIO_IN);
-+	pxa_gpio_mode(GPIO_EMU_MUX1 | GPIO_OUT);
-+	pxa_gpio_mode(GPIO_EMU_MUX2 | GPIO_OUT);
-+
-+	emu_irq_usb4v = platform_get_irq(dev, 0);
-+	if(emu_irq_usb4v < 0) {
-+		printk(KERN_ERR "Unable to get IRQ for USB4V!\n");
-+		return emu_irq_usb4v;
-+	}
-+	emu_irq_usb1v = platform_get_irq(dev, 1);
-+	if(emu_irq_usb1v < 0) {
-+		printk(KERN_ERR "Unable to get IRQ for USB1V!\n");
-+		return emu_irq_usb1v;
-+	}
-+
-+	request_irq(emu_irq_usb4v, &emu_irq, SA_INTERRUPT, "usb 4v", NULL);
-+	request_irq(emu_irq_usb1v, &emu_irq, SA_INTERRUPT, "usb 1v", NULL);
-+
-+	pxa_set_udc_info(&ezx_udc_info);
-+
-+	if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V)))
-+		emu_switch_to_default();
-+	else
-+		emu_switch_to_nothing();
-+
-+	return 0;
-+}
-+
-+static int ezx_emu_remove(struct platform_device *dev)
-+{
-+	free_irq(emu_irq_usb4v, NULL);
-+	free_irq(emu_irq_usb1v, NULL);
-+
-+	return 0;
-+}
-+
-+/* USB Device Controller */
-+static int udc_connected_status;
-+static void ezx_udc_command(int cmd)
-+{
-+	switch (cmd) {
-+	case PXA2XX_UDC_CMD_DISCONNECT:
-+		printk(KERN_NOTICE "USB cmd disconnect\n");
-+		ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0);
-+		udc_connected_status = 0;
-+		break;
-+	case PXA2XX_UDC_CMD_CONNECT:
-+		printk(KERN_NOTICE "USB cmd connect\n");
-+		ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1);
-+		udc_connected_status = 1;
-+		break;
-+	}
-+}
-+
-+static int ezx_udc_is_connected(void)
-+{
-+	return udc_connected_status;
-+}
-+
-+static struct pxa2xx_udc_mach_info ezx_udc_info __initdata = {
-+	.udc_is_connected	= ezx_udc_is_connected,
-+	.udc_command		= ezx_udc_command,
-+};
-+
-+static struct platform_driver ezxemu_driver = {
-+	.probe		= ezx_emu_probe,
-+	.remove		= ezx_emu_remove,
-+	.driver		= {
-+		.name	= "ezx-emu",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+int __init ezx_emu_init(void)
-+{
-+	return platform_driver_register(&ezxemu_driver);
-+}
-+
-+void ezx_emu_fini(void)
-+{
-+	return platform_driver_unregister(&ezxemu_driver);
-+}
-+
-+module_init(ezx_emu_init);
-+module_exit(ezx_emu_fini);
-+
-+MODULE_DESCRIPTION("Motorola Enchanced Mini Usb driver");
-+MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig	2007-09-07 11:32:26.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig	2007-09-07 15:34:08.000000000 -0300
-@@ -108,6 +108,28 @@
- config EZX_PCAP
- 	bool "PCAP Support"
- 
-+config EZX_EMU
-+	bool "Motorola Enchanced Mini Usb"
-+	depends on EZX_PCAP
-+
-+if EZX_EMU
-+
-+choice
-+	prompt "Select default EMU mode"
-+
-+config EZX_EMU_USB
-+	bool "USB"
-+
-+config EZX_EMU_UART
-+	bool "UART"
-+
-+config EZX_EMU_NOTHING
-+	bool "nothing"
-+
-+endchoice
-+
-+endif
-+
- endif
- 
- endmenu
-Index: linux-2.6.21/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile	2007-09-07 11:32:26.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Makefile	2007-09-07 15:34:08.000000000 -0300
-@@ -26,6 +26,7 @@
- obj-$(CONFIG_PXA_EZX_E6)	+= ezx-e6.o
- obj-$(CONFIG_EZX_BP)		+= ezx-bp.o
- obj-$(CONFIG_EZX_PCAP)		+= ezx-pcap.o
-+obj-$(CONFIG_EZX_EMU)		+= ezx-emu.o
- 
- # Support for blinky lights
- led-y := leds.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-enable-stuart.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-enable-stuart.patch
deleted file mode 100755
index 6f1a2c1ba4..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-enable-stuart.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-Index: linux-2.6.21/arch/arm/boot/compressed/head.S
-===================================================================
---- linux-2.6.21.orig/arch/arm/boot/compressed/head.S	2007-05-19 11:22:56.000000000 -0300
-+++ linux-2.6.21/arch/arm/boot/compressed/head.S	2007-05-19 11:50:29.000000000 -0300
-@@ -10,6 +10,7 @@
-  */
- #include <linux/linkage.h>
- 
-+#define DEBUG
- /*
-  * Debugging stuff
-  *
-@@ -117,6 +118,8 @@
- 		mov	r0, r0
- 		.endr
- 
-+		inituart r10, r11
-+
- 		mov     r1, #0x300              @ mach_id 0x363 is official EZX
- 		orr     r1, r1, #0x63           @ bootloader JUMP doesn't set r1
- 
-Index: linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/uncompress.h	2007-05-19 11:22:56.000000000 -0300
-+++ linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h	2007-05-19 11:30:38.000000000 -0300
-@@ -19,9 +19,9 @@
- 
- static inline void putc(char c)
- {
--/*	while (!(UART[5] & 0x40))
-+	while (!(UART[5] & 0x40))
- 		barrier();
--	UART[0] = c;*/
-+	UART[0] = c;
- }
- 
- /*
-Index: linux-2.6.21/include/asm-arm/arch-pxa/debug-macro.S
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/debug-macro.S	2007-05-19 11:30:54.000000000 -0300
-+++ linux-2.6.21/include/asm-arm/arch-pxa/debug-macro.S	2007-05-19 11:49:35.000000000 -0300
-@@ -14,11 +14,52 @@
- #include "hardware.h"
- 
- 		.macro	addruart,rx
--		mrc	p15, 0, \rx, c1, c0
--		tst	\rx, #1			@ MMU enabled?
--		moveq	\rx, #0x40000000		@ physical
--		movne	\rx, #io_p2v(0x40000000)	@ virtual
--		orr	\rx, \rx, #0x00100000
-+@		mrc	p15, 0, \rx, c1, c0
-+@		tst	\rx, #1			@ MMU enabled?
-+		mov	\rx, #0x40000000
-+@		moveq	\rx, #0x40000000		@ physical
-+@		movne	\rx, #io_p2v(0x40000000)	@ virtual
-+		orr	\rx, \rx, #0x00700000
-+		.endm
-+
-+		.macro	inituart,rd,rx
-+		ldr	\rd, =0x41300004	@ CKEN
-+		ldr	\rx, [\rd]
-+		orr	\rx, \rx, #0x20
-+		str	\rx, [\rd]
-+
-+		ldr	\rd, =0x40E0005C
-+		ldr	\rx, [\rd]
-+		bic	\rx, \rx, #0xF0000000	@ clear GPIO46/47 config
-+		orr	\rx, \rx, #0x60000000	@ set GPIO46: AF2, GPIO47: AF1
-+		str	\rx, [\rd]
-+		ldr	\rd, =0x40E00010
-+		ldr	\rx, [\rd]
-+		bic	\rx, \rx, #0x0000c000	@ clear GPIO46/47 direction
-+		orr	\rx, \rx, #0x00008000	@ set GPIO 47 out, 46 in
-+		str	\rx, [\rd]
-+
-+		addruart \rd
-+		mov	\rx, #0x83		@ DLAB = 1
-+		strb	\rx, [\rd, #0x0c]
-+
-+		mov	\rx, #0x08		@ Divisor 8 => 115200 bps
-+		strb	\rx, [\rd, #0x00]
-+
-+		mov 	\rx, #0x00
-+		strb	\rx, [\rd, #0x04]	@ Divisor high = 0
-+
-+		mov	\rx, #0x03
-+		strb	\rx, [\rd, #0x0c]	@ DLAB = 0, n81
-+
-+		mov	\rx, #0x00
-+		strb	\rx, [\rd, #0x10]	@ MCR = 0
-+
-+		mov	\rx, #0x00
-+		strb	\rx, [\rd, #0x28]	@ disable autobaud
-+
-+		mov	\rx, #0x40
-+		strb	\rx, [\rd, #0x04]	@ IER UUE (UART Enable)
- 		.endm
- 
- #define UART_SHIFT	2
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch
deleted file mode 100644
index bf93ebc854..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch
+++ /dev/null
@@ -1,294 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c	2007-09-24 23:40:45.000000000 -0300
-@@ -0,0 +1,260 @@
-+/*
-+ *  EZX EOC Driver for Motorola EZX phones
-+ *
-+ *  Copyright (C) 2007 Alex Zhang <celeber2@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/i2c.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx.h>
-+#include <asm/arch/udc.h>
-+
-+#if 1
-+#define EOC_DBG printk
-+#else
-+#define EOC_DBG(x, args...)
-+#endif
-+
-+#define REG_INT_STATUS 32
-+#define REG_INT_MASK 33
-+#define REG_INT_SENSE 34
-+#define REG_POWER_CONTROL_0 35
-+#define REG_POWER_CONTROL_1 36
-+#define REG_CONN_CONTROL 37
-+
-+#define EOC_REG_ADDR_SIZE  1
-+#define EOC_REG_DATA_SIZE  3
-+#define EOC_FUNC_NOTHING 0
-+#define EOC_FUNC_USB_NET 1
-+
-+static const char eoc_i2c_driver_name[] = "ezx-eoc";
-+static int eoc_func = EOC_FUNC_USB_NET;
-+static struct pxa2xx_udc_mach_info ezx_udc_info;
-+
-+static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter);
-+static int ezx_eoc_detach_client(struct i2c_client *client);
-+
-+static struct i2c_client *eoc_i2c_client = NULL;
-+
-+static struct i2c_driver eoc_i2c_driver = {
-+	.driver = {
-+		.name	= (char *)eoc_i2c_driver_name,
-+	},
-+	.attach_adapter	= ezx_eoc_attach_adapter,
-+	.detach_client	= ezx_eoc_detach_client,
-+};
-+
-+int eoc_reg_read(int reg, unsigned int *reg_value)
-+{
-+	unsigned char reg_num = reg;
-+	unsigned char value[EOC_REG_DATA_SIZE];
-+	int retval;
-+
-+	struct i2c_msg msgs[2] =
-+	{
-+		{ eoc_i2c_client->addr, 0, EOC_REG_ADDR_SIZE, &reg_num },
-+		{ eoc_i2c_client->addr, I2C_M_RD, EOC_REG_DATA_SIZE, value }
-+	};
-+
-+	/* transfer message to client */
-+	retval = i2c_transfer(eoc_i2c_client->adapter, msgs, 2);
-+	if (retval < 0)
-+		return retval;
-+
-+	*reg_value  = (value[2] <<  0);
-+	*reg_value |= (value[1] <<  8);
-+	*reg_value |= (value[0] << 16);
-+	return 0;
-+}
-+
-+int eoc_reg_write(int reg, unsigned int reg_value)
-+{
-+	unsigned char value[EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE];
-+	int retval;
-+
-+	/* Copy the data into a buffer into the correct format */
-+	value[0] = reg;
-+	value[1] = (reg_value >> 16) & 0xFF;
-+	value[2] = (reg_value >>  8) & 0xFF;
-+	value[3] = (reg_value >>  0) & 0xFF;
-+
-+	/* Write the data to the EOC */
-+	retval = i2c_master_send (eoc_i2c_client, value, EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE);
-+	if (retval < 0)
-+		return retval;
-+	return 0;
-+}
-+
-+static void eoc_switch_to_usb(void)
-+{
-+	EOC_DBG("EOC: Switching to USB\n");
-+	pxa_gpio_mode(GPIO34_USB_P2_2_MD);
-+	pxa_gpio_mode(GPIO35_USB_P2_1_MD);
-+	pxa_gpio_mode(GPIO36_USB_P2_4_MD);
-+	pxa_gpio_mode(GPIO39_USB_P2_6_MD);
-+	pxa_gpio_mode(GPIO40_USB_P2_5_MD);
-+	pxa_gpio_mode(GPIO53_USB_P2_3_MD);
-+	UP2OCR = 0x02000000;
-+	/* FIXME change eoc bits to USB */
-+
-+}
-+
-+static void eoc_switch_to_nothing(void)
-+{
-+	EOC_DBG("EOC: Switching do disconnected\n");
-+	pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
-+	set_GPIO(GPIO34_TXENB);
-+	pxa_gpio_mode(GPIO35_XRXD  | GPIO_IN);
-+	pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN);
-+	pxa_gpio_mode(GPIO40_VPIN  | GPIO_IN);
-+	pxa_gpio_mode(GPIO53_VMIN  | GPIO_IN);
-+	/* FIXME disconnect mini usb port */
-+}
-+
-+static void eoc_switch_to_default(void)
-+{
-+	switch (eoc_func) {
-+	case EOC_FUNC_USB_NET:
-+		eoc_switch_to_usb();
-+		break;
-+	case EOC_FUNC_NOTHING:
-+		eoc_switch_to_nothing();
-+		break;
-+	}
-+}
-+
-+static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter)
-+{
-+	int err = 0;
-+	EOC_DBG(">>>>attach adapter enter\n");
-+
-+	if (eoc_i2c_client != NULL) {
-+		EOC_DBG(">>>>already loaded!!!\n");
-+		return 0;
-+	}
-+
-+	if (!(eoc_i2c_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
-+		return -ENOMEM;
-+
-+	eoc_i2c_client->addr = 0x17;
-+	eoc_i2c_client->adapter = adapter;
-+	eoc_i2c_client->driver = &eoc_i2c_driver;
-+	eoc_i2c_client->flags = 0;
-+	strlcpy(eoc_i2c_client->name, eoc_i2c_driver_name, I2C_NAME_SIZE);
-+
-+	if ((err = i2c_attach_client(eoc_i2c_client))) {
-+		kfree(eoc_i2c_client);
-+		eoc_i2c_client = NULL;
-+		return err;
-+	}
-+	eoc_reg_write(REG_INT_MASK, 0x0000FEF);
-+	eoc_reg_write(REG_POWER_CONTROL_0, 0x0000C00);
-+	eoc_reg_write(REG_POWER_CONTROL_1, 0x000000C);
-+	eoc_reg_write(REG_CONN_CONTROL,0x0021044);
-+
-+	eoc_switch_to_default();
-+	EOC_DBG(">>>>attach adapter exit\n");
-+	return 0;
-+
-+}
-+
-+static int ezx_eoc_detach_client(struct i2c_client *client)
-+{
-+	return i2c_detach_client(client);
-+}
-+
-+static int __init ezx_eoc_probe(struct platform_device *dev)
-+{
-+	int ret;
-+
-+	ret = i2c_add_driver(&eoc_i2c_driver);
-+	if (ret != 0)
-+		return -EINVAL;
-+
-+	pxa_set_udc_info(&ezx_udc_info);
-+
-+	return 0;
-+}
-+
-+static int ezx_eoc_remove(struct platform_device *dev)
-+{
-+	return i2c_del_driver(&eoc_i2c_driver);
-+}
-+
-+static int ezx_eoc_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	eoc_switch_to_nothing();
-+	return 0;
-+}
-+
-+static int ezx_eoc_resume(struct platform_device *dev)
-+{
-+	eoc_switch_to_default();
-+	return 0;
-+}
-+
-+/* USB Device Controller */
-+static int udc_connected_status;
-+static void ezx_udc_command(int cmd)
-+{
-+	switch (cmd) {
-+	case PXA2XX_UDC_CMD_DISCONNECT:
-+		printk(KERN_NOTICE "USB cmd disconnect\n");
-+//		ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0);
-+		udc_connected_status = 0;
-+		break;
-+	case PXA2XX_UDC_CMD_CONNECT:
-+		printk(KERN_NOTICE "USB cmd connect\n");
-+//		ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1);
-+		udc_connected_status = 1;
-+		break;
-+	}
-+}
-+
-+static int ezx_udc_is_connected(void)
-+{
-+	return udc_connected_status;
-+}
-+
-+static struct pxa2xx_udc_mach_info ezx_udc_info __initdata = {
-+	.udc_is_connected       = ezx_udc_is_connected,
-+	.udc_command            = ezx_udc_command,
-+};
-+
-+static struct platform_driver ezx_eoc_driver = {
-+	.probe		= ezx_eoc_probe,
-+	.remove		= ezx_eoc_remove,
-+	.suspend	= ezx_eoc_suspend,
-+	.resume		= ezx_eoc_resume,
-+	.driver		= {
-+		.name	= "ezx-eoc",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+int __init ezx_eoc_init(void)
-+{
-+	return platform_driver_register(&ezx_eoc_driver);
-+}
-+
-+void ezx_eoc_exit(void)
-+{
-+	return platform_driver_unregister(&ezx_eoc_driver);
-+}
-+
-+MODULE_AUTHOR("Alex Zhang <celeber2@gmail.com>");
-+MODULE_DESCRIPTION("EZX EOC I2C driver");
-+MODULE_LICENSE("GPL");
-+
-+module_init(ezx_eoc_init);
-+module_exit(ezx_eoc_exit);
-Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig	2007-09-24 20:15:00.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig	2007-09-24 20:15:16.000000000 -0300
-@@ -108,6 +108,12 @@
- config EZX_PCAP
- 	bool "PCAP Support"
- 
-+config EZX_EOC
-+	tristate "EOC i2c driver of Motorola EZX phones"
-+	depends on I2C && EXPERIMENTAL
-+	help
-+	  EOC i2c driver of Motorola EZX phones
-+
- config EZX_EMU
- 	bool "Motorola Enchanced Mini Usb"
- 	depends on EZX_PCAP
-Index: linux-2.6.21/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile	2007-09-24 20:15:00.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Makefile	2007-09-24 20:15:16.000000000 -0300
-@@ -27,6 +27,7 @@
- obj-$(CONFIG_EZX_BP)		+= ezx-bp.o
- obj-$(CONFIG_EZX_PCAP)		+= ezx-pcap.o
- obj-$(CONFIG_EZX_EMU)		+= ezx-emu.o
-+obj-$(CONFIG_EZX_EOC)		+= ezx-eoc.o
- 
- # Support for blinky lights
- led-y := leds.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch
deleted file mode 100755
index c291f1aadf..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-mtd-map.patch
+++ /dev/null
@@ -1,280 +0,0 @@
-Index: linux-2.6.21/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/mtd/maps/Kconfig	2007-08-31 22:27:53.000000000 -0300
-+++ linux-2.6.21/drivers/mtd/maps/Kconfig	2007-08-31 23:04:18.000000000 -0300
-@@ -595,6 +595,34 @@
- 	help
- 	  This enables access to the flash chip on the Sharp SL Series of PDAs.
- 
-+config MTD_EZX
-+	tristate "Map driver for Motorola EZX Platform"
-+	depends on MTD && PXA_EZX
-+
-+if MTD_EZX
-+
-+choice
-+	prompt "Select partition mapping for EZX platform"
-+
-+config MTD_EZX_A780
-+	bool "A780/E680 Original Mapping"
-+
-+config MTD_EZX_A780_ALTERNATE
-+	bool "A780/E680 Alternate Mapping for BLOB2"
-+
-+config MTD_EZX_A1200
-+	bool "A1200 Original Mapping"
-+
-+config MTD_EZX_E2
-+	bool "E2 Original Mapping"
-+
-+config MTD_EZX_E6
-+	bool "E6 Original Mapping"
-+
-+endchoice
-+
-+endif
-+
- config MTD_PLATRAM
- 	tristate "Map driver for platform device RAM (mtd-ram)"
- 	depends on MTD
-Index: linux-2.6.21/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/mtd/maps/Makefile	2007-08-31 22:27:53.000000000 -0300
-+++ linux-2.6.21/drivers/mtd/maps/Makefile	2007-08-31 23:04:18.000000000 -0300
-@@ -72,3 +72,4 @@
- obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
- obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o
-+obj-$(CONFIG_MTD_EZX)		+= ezx-flash.o
-Index: linux-2.6.21/drivers/mtd/maps/ezx-flash.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/mtd/maps/ezx-flash.c	2007-08-21 17:03:43.000000000 -0300
-@@ -0,0 +1,227 @@
-+/*
-+ * $Id:  $
-+ *
-+ * Map driver for the PXA27x
-+ *
-+ * Author:	Harald Welte
-+ * Copyright:	(C) 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Mar 3, 2007 - (Daniel Ribeiro) Alternate partition table
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/slab.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/io.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/mainstone.h>
-+
-+#define WINDOW_ADDR		0x0
-+#define WINDOW_SIZE		(32*1024*1024)
-+#define WINDOW_CACHE_ADDR	0x0
-+#define WINDOW_CACHE_SIZE	0x1a00000
-+
-+static void pxa27x_map_inval_cache(struct map_info *map, unsigned long from,
-+				   ssize_t len)
-+{
-+#if 0
-+	unsigned long endaddress, i, j;
-+	endaddress = from + len -1;
-+	from &= ~(32-1);
-+	endaddress &= ~(32-1);
-+	for (i = from; i <= endaddress; i += 32)
-+		asm("mcr	p15, 0, %0, c7, c6, 1"::"r"(i));
-+
-+	asm(	"mrc p15, 0, %0, c2, c0, 0\n"
-+		"mov %0, %0\n"
-+		"sub pc, pc #4"
-+		:"=r"(j));
-+#else
-+	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
-+#endif
-+}
-+
-+
-+struct map_info pxa27x_map = {
-+	.name		= "PXA27x flash",
-+	.size		= WINDOW_SIZE,
-+	.phys		= WINDOW_ADDR,
-+	.inval_cache	= &pxa27x_map_inval_cache,
-+};
-+
-+#if defined CONFIG_MTD_EZX_A780_ALTERNATE
-+static struct mtd_partition pxa27x_partitions[] = {
-+	{
-+		.name		= "Bootloader (RO)",
-+		.size		= 0x00020000,
-+		.offset		= 0,
-+		.mask_flags	= MTD_WRITEABLE,
-+	}, {
-+		.name		= "Bootloader 2",
-+		.size		= 0x00020000,
-+		.offset		= 0x00020000,
-+	} , {
-+		.name		= "Moto Kernel",
-+		.size		= 0x000e0000, // 896KB
-+		.offset		= 0x00040000,
-+	} , {
-+		.name		= "rootfs",
-+		.size		= 0x01760000,
-+		.offset		= 0x00120000,
-+	} , {
-+		.name		= "OpenEZX Kernel",
-+		.size		= 0x00180000, // 1.5MB
-+		.offset		= 0x01880000,
-+	} , {
-+		.name		= "ezxlocal",
-+		.size		= 0x005a0000,
-+		.offset		= 0x01a00000,
-+	} , {
-+		.name		= "setup",
-+		.size		= 0x00020000,
-+		.offset		= 0x01fa0000,
-+	} , {
-+		.name		= "Logo",
-+		.size		= 0x00020000,
-+		.offset		= 0x01fc0000,
-+	},
-+};
-+#elif defined CONFIG_MTD_EZX_A780
-+static struct mtd_partition pxa27x_partitions[] = {
-+	{
-+		.name		= "Bootloader",
-+		.size		= 0x00020000,
-+		.offset		= 0,
-+		.mask_flags	= MTD_WRITEABLE,
-+	}, {
-+		.name		= "Kernel",
-+		.size		= 0x000e0000,
-+		.offset		= 0x00020000,
-+	} , {
-+		.name		= "rootfs",
-+		.size		= 0x018e0000,
-+		.offset		= 0x00120000,
-+	} , {
-+		.name		= "VFM_Filesystem",
-+		.size		= 0x00580000,
-+		.offset		= 0x01a00000,
-+	} , {
-+		.name		= "setup",
-+		.size		= 0x00020000,
-+		.offset		= 0x01fa0000,
-+	} , {
-+		.name		= "Logo",
-+		.size		= 0x00020000,
-+		.offset		= 0x01fc0000,
-+	},
-+};
-+#else
-+#error "please define partition for this PXA27x implementation"
-+#endif
-+
-+
-+static struct mtd_info *mymtd;
-+static struct mtd_partition *parsed_parts;
-+
-+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-+
-+static int __init init_pxa27x(void)
-+{
-+	struct mtd_partition *parts;
-+	int nb_parts = 0;
-+	int parsed_nr_parts = 0;
-+	char *part_type = "static";
-+
-+	pxa27x_map.bankwidth = (BOOT_DEF & 1) ? 2 : 4;
-+
-+	printk("Probing PXA27x flash at physical address 0x%08x (%d-bit bankwidth)\n",
-+		WINDOW_ADDR, pxa27x_map.bankwidth * 8);
-+	pxa27x_map.virt = ioremap(pxa27x_map.phys, pxa27x_map.size);
-+
-+	if (!pxa27x_map.virt) {
-+		printk("Failed to ioremap\n");
-+		return -EIO;
-+	}
-+
-+	mymtd = do_map_probe("cfi_probe", &pxa27x_map);
-+	if (!mymtd) {
-+		iounmap((void *)pxa27x_map.virt);
-+		return -ENXIO;
-+	}
-+	mymtd->owner = THIS_MODULE;
-+
-+#if 0
-+	/* ioremap the first flash chip as cacheable */
-+	pxa27x_map.cached = ioremap_cached(pxa27x_map.phys, pxa27x_map.size);
-+	if (!pxa27x_map.cached) {
-+		printk("Failed to do cacheable-ioremap\n");
-+		iounmap((void *)pxa27x_map.virt);
-+		return -EIO;
-+	}
-+#endif
-+	simple_map_init(&pxa27x_map);
-+
-+	if (parsed_nr_parts == 0) {
-+		int ret = parse_mtd_partitions(mymtd, probes, &parsed_parts, 0);
-+
-+		if (ret > 0) {
-+			part_type = "RedBoot";
-+			parsed_nr_parts = ret;
-+		}
-+	}
-+
-+	if (parsed_nr_parts > 0) {
-+		parts = parsed_parts;
-+		nb_parts = parsed_nr_parts;
-+	} else {
-+		parts = pxa27x_partitions;
-+		nb_parts = ARRAY_SIZE(pxa27x_partitions);
-+	}
-+
-+	if (nb_parts) {
-+		printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-+		add_mtd_partitions(mymtd, parts, nb_parts);
-+	} else {
-+		add_mtd_device(mymtd);
-+	}
-+#if 0
-+	if (ret = ezx_partition_init())
-+#endif
-+	return 0;
-+}
-+
-+static void __exit cleanup_pxa27x(void)
-+{
-+	if (mymtd) {
-+		del_mtd_partitions(mymtd);
-+		map_destroy(mymtd);
-+		if (parsed_parts)
-+			kfree(parsed_parts);
-+	}
-+	if (pxa27x_map.virt)
-+		iounmap((void *)pxa27x_map.virt);
-+	if (pxa27x_map.cached)
-+		iounmap((void *)pxa27x_map.cached);
-+	return;
-+}
-+
-+module_init(init_pxa27x);
-+module_exit(cleanup_pxa27x);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
-+MODULE_DESCRIPTION("MTD map driver for Motorola EZX platform");
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch
deleted file mode 100755
index 604f8eb59b..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-pcap.patch
+++ /dev/null
@@ -1,848 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-pcap.c	2007-08-31 22:48:16.000000000 -0300
-@@ -0,0 +1,513 @@
-+/* Driver for Motorola PCAP2 as present in EZX phones
-+ *
-+ * This is both a SPI device driver for PCAP itself, as well as
-+ * an IRQ demultiplexer for handling PCAP generated events such as
-+ * headphone jack sense by downstream drivers.
-+ *
-+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
-+ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/arch/ezx.h>
-+#include <asm/arch/ssp.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/mach/irq.h>
-+
-+#if 0
-+#define DEBUGP(x, args...) printk(x, ## args)
-+#else
-+#define DEBUGP(x, args...)
-+#endif
-+
-+static DEFINE_SPINLOCK(ezx_ssp_lock);
-+static struct ssp_dev ezx_ssp_dev;
-+static struct ssp_state ezx_ssp_state;
-+static struct pcap_platform_data *pcap_data;
-+static int pcap_irq;
-+
-+static unsigned long ezx_ssp_pcap_putget(ulong data)
-+{
-+	unsigned long flag;
-+	u32 ret = 0;
-+
-+	spin_lock_irqsave(&ezx_ssp_lock, flag);
-+	if (pcap_data->cs >= 0) {
-+		if (pcap_data->flags & PCAP_CS_AH)
-+			GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+		else
-+			GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+	}
-+
-+	ssp_write_word(&ezx_ssp_dev,data);
-+ 	ssp_read_word(&ezx_ssp_dev, &ret);
-+
-+	if (pcap_data->cs >= 0) {
-+		if(pcap_data->flags & PCAP_CS_AH)
-+			GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+		else
-+			GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+	}
-+
-+	spin_unlock_irqrestore(&ezx_ssp_lock, flag);
-+
-+	return ret;
-+}
-+
-+int ezx_pcap_write(u_int8_t reg_num, u_int32_t value)
-+{
-+	value &= PCAP_REGISTER_VALUE_MASK;
-+	value |= PCAP_REGISTER_WRITE_OP_BIT
-+		| (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT);
-+
-+	ezx_ssp_pcap_putget(value);
-+
-+	DEBUGP("pcap write r%x: 0x%08x\n", reg_num, value);
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_write);
-+
-+int ezx_pcap_read(u_int8_t reg_num, u_int32_t *value)
-+{
-+	u_int32_t frame = PCAP_REGISTER_READ_OP_BIT
-+		| (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT);
-+
-+	*value = ezx_ssp_pcap_putget(frame);
-+
-+	DEBUGP("pcap read r%x:  0x%08x\n", reg_num, *value);
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_read);
-+
-+int ezx_pcap_bit_set(u_int32_t sspPcapBit, u_int8_t to)
-+{
-+        int ret;
-+        u_int32_t tmp;
-+        u_int32_t bit = (sspPcapBit & PCAP_REGISTER_VALUE_MASK);
-+        u_int8_t reg_num = (sspPcapBit & PCAP_REGISTER_ADDRESS_MASK)
-+                                        >> PCAP_REGISTER_ADDRESS_SHIFT;
-+
-+        ret = ezx_pcap_read(reg_num, &tmp);
-+        if (ret < 0)
-+                return ret;
-+
-+        if (to == 0)
-+                tmp &= ~bit;
-+        else
-+                tmp |= bit;
-+
-+        return ezx_pcap_write(reg_num, tmp);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_bit_set);
-+
-+int ezx_pcap_read_bit(u_int32_t bit)
-+{
-+        int ret;
-+        u_int32_t tmp;
-+        u_int8_t reg_num = (bit & PCAP_REGISTER_ADDRESS_MASK)
-+                                        >> PCAP_REGISTER_ADDRESS_SHIFT;
-+
-+        ret = ezx_pcap_read(reg_num, &tmp);
-+        if (ret < 0)
-+                return ret;
-+
-+        return tmp & (bit & PCAP_REGISTER_VALUE_MASK);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_read_bit);
-+
-+/* /proc/pcap support */
-+#ifdef CONFIG_PROC_FS
-+
-+static struct proc_dir_entry *proc_pcap;
-+
-+char *pcap_registers[] = {
-+	"ISR\t", "MSR\t", "PSTAT\t", "INT_SEL\t", "SWCTRL\t", "VREG1\t",
-+	"VREG2\t", "VREG\t", "BATT_DAC", "ADC1\t", "ADC2\t", "AUD_CODEC",
-+	"RX_AUD_AMPS", "ST_DAC\t", "RTC_TOD\t", "RTC_TODA", "RTC_DAY\t",
-+	"RTC_DAYA", "MTRTMR\t", "PWRCTRL\t", "BUSCTRL\t", "PERIPH\t",
-+	"AUXVREG_MASK", "VENDOR_REV", "LOWPWR_CTRL", "PERIPH_MASK",
-+	"TX_AUD_AMPS", "GP\t",
-+	NULL, NULL, NULL, NULL
-+};
-+
-+static int pcap_read_proc(char *page, char **start, off_t off, int count,
-+				int *eof, void *data_unused)
-+{
-+	int len = 0;
-+	u_int8_t r;
-+	u_int32_t v;
-+	off_t begin = 0;
-+
-+	for(r=0;r<32;r++) {
-+		if (pcap_registers[r] == NULL)
-+			continue;
-+		ezx_pcap_read(r, &v);
-+		len += sprintf(page+len, "%s\t%08X\n", pcap_registers[r], v);
-+		if(len + begin > off + count)
-+			goto done;
-+		if(len + begin < off) {
-+			begin += len;
-+			len = 0;
-+		}
-+	}
-+	*eof = 1;
-+done:
-+	if (off >= len+begin)
-+		return 0;
-+	*start = page + (off-begin);
-+	return ((count < begin+len-off) ? count : begin+len-off);
-+}
-+#endif
-+
-+void ezx_pcap_vibrator_level(u_int32_t value)
-+{
-+       u_int32_t tmp;
-+
-+       ezx_pcap_read(PCAP_REG_AUXVREG, &tmp);
-+
-+       tmp &= ~PCAP_AUXVREG_V_VIB_MASK;
-+       tmp |= ((value << PCAP_AUXVREG_V_VIB_SHIFT) & PCAP_AUXVREG_V_VIB_MASK);
-+
-+       ezx_pcap_write(PCAP_REG_AUXVREG, tmp);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_vibrator_level);
-+
-+/* MMC/SD specific functions */
-+
-+void ezx_pcap_mmcsd_voltage(u_int32_t bits)
-+{
-+        unsigned int tmp;
-+        ezx_pcap_read(PCAP_REG_AUXVREG, &tmp);
-+	if (pcap_data->flags & PCAP_MCI_SD) {
-+		tmp &= ~PCAP_AUXVREG_VAUX2_MASK;
-+		tmp |= ((bits << PCAP_AUXVREG_VAUX2_SHIFT) &
-+					PCAP_AUXVREG_VAUX2_MASK);
-+	}
-+	else if (pcap_data->flags & PCAP_MCI_TF) {
-+		tmp &= ~PCAP_AUXVREG_VAUX3_MASK;
-+		tmp |= ((bits << PCAP_AUXVREG_VAUX3_SHIFT) &
-+					PCAP_AUXVREG_VAUX3_MASK);
-+	}
-+        ezx_pcap_write(PCAP_REG_AUXVREG, tmp);
-+}
-+EXPORT_SYMBOL(ezx_pcap_mmcsd_voltage);
-+
-+int ezx_pcap_mmcsd_power(int on)
-+{
-+	if (on > 0) on = 1;
-+	else on = 0;
-+
-+	if (pcap_data->flags & PCAP_MCI_SD)
-+		return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX2_EN, on);
-+	else if (pcap_data->flags & PCAP_MCI_TF)
-+		return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX3_EN, on);
-+	else
-+		return -ENODEV;
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_power);
-+
-+/* IRQ Handling */
-+
-+/* Array indexed by BIT POSITION of PCAP register, returns IRQ number */
-+static unsigned int pcap2irq[] = {
-+        [0]     = EZX_IRQ_ADCDONE,
-+        [1]     = EZX_IRQ_TS,
-+        [2]     = EZX_IRQ_1HZ, /* 1HZ */
-+        [3]     = EZX_IRQ_WH, /* WH */
-+        [4]     = EZX_IRQ_WL, /* WL */
-+        [5]     = EZX_IRQ_TODA, /* TODA */
-+        [6]     = EZX_IRQ_USB4V,
-+        [7]     = EZX_IRQ_ONOFF, /* ONOFF */
-+        [8]     = EZX_IRQ_ONOFF2, /* ONOFF2 */
-+        [9]     = EZX_IRQ_USB1V,
-+        [10]    = EZX_IRQ_MOBPORT, /* MOBPORT */
-+        [11]    = EZX_IRQ_MIC,
-+        [12]    = EZX_IRQ_HEADJACK,
-+        [13]    = EZX_IRQ_ST, /* ST */
-+        [14]    = EZX_IRQ_PC, /* PC */
-+        [15]    = EZX_IRQ_WARM, /* WARM */
-+        [16]    = EZX_IRQ_EOL, /* EOL */
-+        [17]    = EZX_IRQ_CLK, /* CLK */
-+        [18]    = EZX_IRQ_SYSRST, /* SYSRST */
-+        [19]    = 0,
-+        [20]    = EZX_IRQ_ADCDONE2,
-+        [21]    = EZX_IRQ_SOFTRESET, /* SOFTRESET */
-+        [22]    = EZX_IRQ_MNEXB, /* MNEXB */
-+};
-+
-+/* Array indexed by IRQ NUMBER, returns PCAP absolute value */
-+static unsigned int irq2pcap[] = {
-+	[EZX_IRQ_MNEXB]		= PCAP_IRQ_MNEXB,
-+	[EZX_IRQ_SOFTRESET]	= PCAP_IRQ_SOFTRESET,
-+	[EZX_IRQ_SYSRST]	= PCAP_IRQ_SYSRST,
-+	[EZX_IRQ_CLK]		= PCAP_IRQ_CLK,
-+	[EZX_IRQ_EOL]		= PCAP_IRQ_EOL,
-+	[EZX_IRQ_WARM]		= PCAP_IRQ_WARM,
-+	[EZX_IRQ_PC]		= PCAP_IRQ_PC,
-+	[EZX_IRQ_ST]		= PCAP_IRQ_ST,
-+	[EZX_IRQ_MOBPORT]	= PCAP_IRQ_MOBPORT,
-+	[EZX_IRQ_ONOFF2]	= PCAP_IRQ_ONOFF2,
-+	[EZX_IRQ_ONOFF]		= PCAP_IRQ_ONOFF,
-+	[EZX_IRQ_TODA]		= PCAP_IRQ_TODA,
-+	[EZX_IRQ_WL]		= PCAP_IRQ_WL,
-+	[EZX_IRQ_WH]		= PCAP_IRQ_WH,
-+	[EZX_IRQ_1HZ]		= PCAP_IRQ_1HZ,
-+        [EZX_IRQ_USB4V]         = PCAP_IRQ_USB4V,
-+        [EZX_IRQ_USB1V]         = PCAP_IRQ_USB1V,
-+        [EZX_IRQ_HEADJACK]      = PCAP_IRQ_A1,
-+        [EZX_IRQ_MIC]           = PCAP_IRQ_MB2,
-+        [EZX_IRQ_TS]            = PCAP_IRQ_TS,
-+        [EZX_IRQ_ADCDONE]       = PCAP_IRQ_ADCDONE,
-+        [EZX_IRQ_ADCDONE2]      = PCAP_IRQ_ADCDONE2,
-+};
-+
-+static void pcap_ack_irq(unsigned int irq)
-+{
-+        DEBUGP("pcap_ack_irq: %u\n", irq);
-+        ezx_pcap_write(PCAP_REG_ISR, irq2pcap[irq]);
-+}
-+
-+static void pcap_mask_irq(unsigned int irq)
-+{
-+        u_int32_t reg;
-+	unsigned long flag;
-+
-+	spin_lock_irqsave(&ezx_ssp_lock, flag);
-+        DEBUGP("pcap_mask_irq: %u\n", irq);
-+        ezx_pcap_read(PCAP_REG_MSR, &reg);
-+        reg |= irq2pcap[irq];
-+        ezx_pcap_write(PCAP_REG_MSR, reg);
-+	spin_unlock_irqrestore(&ezx_ssp_lock, flag);
-+}
-+
-+static void pcap_unmask_irq(unsigned int irq)
-+{
-+        u_int32_t tmp;
-+	unsigned long flag;
-+
-+	spin_lock_irqsave(&ezx_ssp_lock, flag);
-+        DEBUGP("pcap_unmask_irq: %u\n", irq);
-+        ezx_pcap_read(PCAP_REG_MSR, &tmp);
-+        tmp &= ~irq2pcap[irq];
-+        ezx_pcap_write(PCAP_REG_MSR, tmp);
-+	spin_unlock_irqrestore(&ezx_ssp_lock, flag);
-+}
-+
-+static struct irq_chip pcap_chip = {
-+        .ack    = pcap_ack_irq,
-+        .mask   = pcap_mask_irq,
-+        .unmask = pcap_unmask_irq,
-+};
-+
-+/* handler for interrupt received from PCAP via GPIO */
-+static void pcap_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+	const unsigned int cpu = smp_processor_id();
-+        int i;
-+        u_int32_t isr, msr;
-+
-+	spin_lock(&desc->lock);
-+	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
-+	if (unlikely(desc->status & (IRQ_INPROGRESS | IRQ_DISABLED))) {
-+		desc->status |= (IRQ_PENDING | IRQ_MASKED);
-+		desc->chip->mask(irq);
-+		desc->chip->ack(irq);
-+		goto out_unlock;
-+	}
-+	kstat_cpu(cpu).irqs[irq]++;
-+	desc->chip->ack(irq);
-+	desc->status |= IRQ_INPROGRESS;
-+	do {
-+		if (unlikely((desc->status &
-+			       (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
-+			      (IRQ_PENDING | IRQ_MASKED))) {
-+			desc->chip->unmask(irq);
-+			desc->status &= ~IRQ_MASKED;
-+		}
-+		desc->status &= ~IRQ_PENDING;
-+
-+		ezx_pcap_read(PCAP_REG_ISR, &isr);
-+		ezx_pcap_read(PCAP_REG_MSR, &msr);
-+		for (i = ARRAY_SIZE(pcap2irq)-1; i >= 0; i--) {
-+			unsigned int pirq = pcap2irq[i];
-+			struct irq_desc *subdesc;
-+			if (pirq == 0 || !(isr & irq2pcap[pirq]))
-+				continue;
-+			subdesc = irq_desc + pirq;
-+			if (msr & irq2pcap[pirq])
-+				continue;
-+			DEBUGP("found irq %u\n", pirq);
-+			spin_unlock(&desc->lock);
-+			desc_handle_irq(pirq, subdesc);
-+			spin_lock(&desc->lock);
-+		}
-+
-+	} while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
-+
-+	desc->status &= ~IRQ_INPROGRESS;
-+out_unlock:
-+	spin_unlock(&desc->lock);
-+}
-+
-+static int ezx_pcap_remove(struct platform_device *pdev)
-+{
-+	int irq;
-+	DEBUGP("exz_pcap_remove entered\n");
-+
-+	set_irq_chained_handler(pcap_irq, NULL);
-+
-+	for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) {
-+		set_irq_chip(irq, NULL);
-+		set_irq_handler(irq, NULL);
-+		set_irq_flags(irq, 0);
-+	}
-+
-+	ssp_exit(&ezx_ssp_dev);
-+
-+	return 0;
-+}
-+
-+static int __init ezx_pcap_probe(struct platform_device *pdev)
-+{
-+	unsigned int ret, irq;
-+	DEBUGP("ezx_pcap_probe entered\n");
-+
-+	pcap_data = pdev->dev.platform_data;
-+
-+	/* configure ssp port */
-+	pxa_gpio_mode(29|GPIO_ALT_FN_3_OUT);
-+	pxa_gpio_mode(GPIO24_SFRM_MD);
-+	pxa_gpio_mode(GPIO25_STXD_MD);
-+	pxa_gpio_mode(GPIO26_SRXD_MD);
-+
-+	if (pcap_data->cs >= 0) {
-+		if (pcap_data->flags & PCAP_CS_AH)
-+			pxa_gpio_mode(pcap_data->cs | GPIO_OUT);
-+		else
-+			pxa_gpio_mode(pcap_data->cs | GPIO_OUT
-+						| GPIO_DFLT_HIGH);
-+	}
-+	pcap_irq = platform_get_irq(pdev, 0);
-+	if(pcap_irq < 0) {
-+		printk(KERN_ERR "Unable to get IRQ for pcap!\n");
-+		return pcap_irq;
-+	}
-+
-+	ret = ssp_init(&ezx_ssp_dev, pcap_data->port, 0);
-+	if (ret) {
-+		printk(KERN_ERR "Unable to register SSP handler!\n");
-+		return ret;
-+	}
-+
-+	ssp_disable(&ezx_ssp_dev);
-+	ssp_config(&ezx_ssp_dev,
-+		(SSCR0_Motorola | SSCR0_DataSize(16) | SSCR0_EDSS),
-+		(SSCR1_TxTresh(1) | SSCR1_RxTresh(1)),
-+		0, SSCR0_SerClkDiv(pcap_data->clk));
-+	ssp_enable(&ezx_ssp_dev);
-+
-+	/* mask/ack all PCAP interrupts */
-+	ezx_pcap_write(PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT);
-+	ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
-+
-+	if (pcap_data->init)
-+		pcap_data->init();
-+
-+        /* set up interrupt demultiplexing code for PCAP2 irqs */
-+	set_irq_type(pcap_irq, IRQT_RISING);
-+        for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) {
-+                set_irq_chip(irq, &pcap_chip);
-+                set_irq_handler(irq, handle_level_irq);
-+                set_irq_flags(irq, IRQF_VALID);
-+        }
-+        set_irq_chained_handler(pcap_irq, pcap_irq_demux_handler);
-+	set_irq_wake(pcap_irq, 1);
-+
-+	printk("ezx-pcap: ssp driver registered\n");
-+        return ret;
-+}
-+
-+static int ezx_pcap_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	DEBUGP("pcap suspend!\n");
-+	ssp_flush(&ezx_ssp_dev);
-+	ssp_save_state(&ezx_ssp_dev, &ezx_ssp_state);
-+	if (pcap_data->cs >= 0)
-+			pxa_gpio_mode(pcap_data->cs | GPIO_IN);
-+        return 0;
-+}
-+
-+static int ezx_pcap_resume(struct platform_device *dev)
-+{
-+	DEBUGP("pcap resume!\n");
-+
-+	if (pcap_data->cs >= 0) {
-+		if (pcap_data->flags & PCAP_CS_AH) {
-+			pxa_gpio_mode(pcap_data->cs | GPIO_OUT);
-+			GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+		}
-+		else {
-+			pxa_gpio_mode(pcap_data->cs | GPIO_OUT | GPIO_DFLT_HIGH);
-+			GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+		}
-+	}
-+	ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state);
-+	ssp_enable(&ezx_ssp_dev);
-+
-+	ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
-+
-+        return 0;
-+}
-+
-+static struct platform_driver ezxpcap_driver = {
-+	.probe          = ezx_pcap_probe,
-+	.remove         = ezx_pcap_remove,
-+	.suspend	= ezx_pcap_suspend,
-+	.resume		= ezx_pcap_resume,
-+	.driver         = {
-+		.name   = "ezx-pcap",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init ezx_pcap_init(void)
-+{
-+	DEBUGP("ezx_pcap_init entered\n");
-+
-+#ifdef CONFIG_PROC_FS
-+	if((proc_pcap = create_proc_entry("pcap", 0, NULL)))
-+		proc_pcap->read_proc = pcap_read_proc;
-+#endif
-+
-+	return platform_driver_register(&ezxpcap_driver);
-+}
-+
-+static void __exit ezx_pcap_exit(void)
-+{
-+#ifdef CONFIG_PROC_FS
-+	if (proc_pcap)
-+		remove_proc_entry("pcap", NULL);
-+#endif
-+
-+	return platform_driver_unregister(&ezxpcap_driver);
-+}
-+
-+module_init(ezx_pcap_init);
-+module_exit(ezx_pcap_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte");
-+MODULE_DESCRIPTION("SPI Driver for Motorola PCAP2");
-+
-Index: linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/include/asm-arm/arch-pxa/ezx-pcap.h	2007-09-04 23:34:19.000000000 -0300
-@@ -0,0 +1,247 @@
-+/*
-+ * Copyright 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ */
-+
-+#ifndef EZX_PCAP_H
-+#define EZX_PCAP_H
-+
-+struct pcap_platform_data {
-+	int port;		/* SSP port */
-+	int cs;			/* CS gpio */
-+	int clk;
-+	int flags;		/* driver flags */
-+	int (*init)(void);	/* board specific driver init */
-+};
-+
-+/* driver configuration */
-+#define PCAP_CS_AH		(1 << 0) /* CS pin is active high */
-+#define PCAP_MCI_SD		(1 << 1) /* SD card slot */
-+#define PCAP_MCI_TF		(1 << 2) /* TF card slot */
-+
-+#define PCAP_REGISTER_WRITE_OP_BIT	0x80000000
-+#define PCAP_REGISTER_READ_OP_BIT	0x00000000
-+
-+#define PCAP_REGISTER_VALUE_MASK	0x01ffffff
-+#define PCAP_REGISTER_ADDRESS_MASK	0x7c000000
-+#define PCAP_REGISTER_ADDRESS_SHIFT	26
-+#define PCAP_REGISTER_NUMBER		32
-+#define PCAP_CLEAR_INTERRUPT_REGISTER	0x01ffffff
-+#define PCAP_MASK_ALL_INTERRUPT		0x01ffffff
-+
-+
-+#define pbit(reg, bit)	((reg << PCAP_REGISTER_ADDRESS_SHIFT) | bit)
-+
-+/* registers acessible by both pcap ports */
-+#define PCAP_REG_ISR		0x0	/* Interrupt Status */
-+#define PCAP_REG_MSR		0x1	/* Interrupt Mask */
-+#define PCAP_REG_PSTAT		0x2	/* Processor Status */
-+#define PCAP_REG_VREG2		0x6	/* Regulator Bank 2 Control */
-+#define PCAP_REG_AUXVREG	0x7	/* Auxiliary Regulator Control */
-+#define PCAP_REG_BATT		0x8	/* Battery Control */
-+#define PCAP_REG_ADC1		0x9	/* AD Control */
-+#define PCAP_REG_ADC2		0xa	/* AD Result */
-+#define PCAP_REG_CODEC		0xb	/* Audio Codec Control */
-+#define PCAP_REG_RX_AMPS	0xc	/* RX Audio Amplifiers Control */
-+#define PCAP_REG_ST_DAC		0xd	/* Stereo DAC Control */
-+#define PCAP_REG_BUSCTRL	0x14	/* Connectivity Control */
-+#define PCAP_REG_PERIPH		0x15	/* Peripheral Control */
-+#define PCAP_REG_LOWPWR		0x18	/* Regulator Low Power Control */
-+#define PCAP_REG_TX_AMPS	0x1a	/* TX Audio Amplifiers Control */
-+#define PCAP_REG_GP		0x1b	/* General Purpose */
-+
-+/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
-+#define PCAP_REG_INT_SEL	0x3	/* Interrupt Select */
-+#define PCAP_REG_SWCTRL		0x4	/* Switching Regulator Control */
-+#define PCAP_REG_VREG1		0x5	/* Regulator Bank 1 Control */
-+#define PCAP_REG_RTC_TOD	0xe	/* RTC Time of Day */
-+#define PCAP_REG_RTC_TODA	0xf	/* RTC Time of Day Alarm */
-+#define PCAP_REG_RTC_DAY	0x10	/* RTC Day */
-+#define PCAP_REG_RTC_DAYA	0x11	/* RTC Day Alarm */
-+#define PCAP_REG_MTRTMR		0x12	/* AD Monitor Timer */
-+#define PCAP_REG_PWR		0x13	/* Power Control */
-+#define PCAP_REG_AUXVREG_MASK	0x16	/* Auxiliary Regulator Mask */
-+#define PCAP_REG_VENDOR_REV	0x17
-+#define PCAP_REG_PERIPH_MASK	0x19	/* Peripheral Mask */
-+
-+/* interrupts - registers 0, 1, 2, 3 */
-+#define PCAP_IRQ_ADCDONE	(1 << 0)	/* AD Conversion Done Port 1 */
-+#define PCAP_IRQ_TS		(1 << 1)	/* Touch Screen */
-+#define PCAP_IRQ_1HZ		(1 << 2)	/* 1HZ Timer */
-+#define PCAP_IRQ_WH		(1 << 3)
-+#define PCAP_IRQ_WL		(1 << 4)
-+#define PCAP_IRQ_TODA		(1 << 5)
-+#define PCAP_IRQ_USB4V		(1 << 6)
-+#define PCAP_IRQ_ONOFF		(1 << 7)
-+#define PCAP_IRQ_ONOFF2		(1 << 8)
-+#define PCAP_IRQ_USB1V		(1 << 9)
-+#define PCAP_IRQ_MOBPORT	(1 << 10)
-+#define PCAP_IRQ_MB2		(1 << 11)	/* Mic */
-+#define PCAP_IRQ_A1		(1 << 12)	/* Audio jack */
-+#define PCAP_IRQ_ST		(1 << 13)
-+#define PCAP_IRQ_PC		(1 << 14)
-+#define PCAP_IRQ_WARM		(1 << 15)
-+#define PCAP_IRQ_EOL		(1 << 16)
-+#define PCAP_IRQ_CLK		(1 << 17)
-+#define PCAP_IRQ_SYSRST		(1 << 18)
-+#define PCAP_IRQ_ADCDONE2	(1 << 20)	/* AD Conversion Done Port 2 */
-+#define PCAP_IRQ_SOFTRESET	(1 << 21)
-+#define PCAP_IRQ_MNEXB		(1 << 22)
-+
-+#define PCAP_BIT_VREG2_V1_STBY			pbit(PCAP_REG_VREG2, (1 << 0))
-+#define PCAP_BIT_VREG2_V2_STBY			pbit(PCAP_REG_VREG2, (1 << 1))
-+#define PCAP_BIT_VREG2_V3_STBY			pbit(PCAP_REG_VREG2, (1 << 2))
-+#define PCAP_BIT_VREG2_V4_STBY			pbit(PCAP_REG_VREG2, (1 << 3))
-+#define PCAP_BIT_VREG2_V5_STBY			pbit(PCAP_REG_VREG2, (1 << 4))
-+#define PCAP_BIT_VREG2_V6_STBY			pbit(PCAP_REG_VREG2, (1 << 5))
-+#define PCAP_BIT_VREG2_V7_STBY			pbit(PCAP_REG_VREG2, (1 << 6))
-+#define PCAP_BIT_VREG2_V8_STBY			pbit(PCAP_REG_VREG2, (1 << 7))
-+#define PCAP_BIT_VREG2_V9_STBY			pbit(PCAP_REG_VREG2, (1 << 8))
-+#define PCAP_BIT_VREG2_V10_STBY			pbit(PCAP_REG_VREG2, (1 << 9))
-+#define PCAP_BIT_VREG2_V1_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 10))
-+#define PCAP_BIT_VREG2_V2_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 11))
-+#define PCAP_BIT_VREG2_V3_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 12))
-+#define PCAP_BIT_VREG2_V4_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 13))
-+#define PCAP_BIT_VREG2_V5_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 14))
-+#define PCAP_BIT_VREG2_V6_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 15))
-+#define PCAP_BIT_VREG2_V7_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 16))
-+#define PCAP_BIT_VREG2_V8_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 17))
-+#define PCAP_BIT_VREG2_V9_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 18))
-+#define PCAP_BIT_VREG2_V10_LOWPWR		pbit(PCAP_REG_VREG2, (1 << 19))
-+
-+#define PCAP_BIT_AUXVREG_VAUX1_EN		pbit(PCAP_REG_AUXVREG, (1 << 1))
-+#define PCAP_AUXVREG_VAUX1_MASK			0x0000000c
-+#define PCAP_AUXVREG_VAUX1_SHIFT		2
-+#define PCAP_BIT_AUXVREG_VAUX2_EN		pbit(PCAP_REG_AUXVREG, (1 << 4))
-+#define PCAP_AUXVREG_VAUX2_MASK			0x00000060
-+#define PCAP_AUXVREG_VAUX2_SHIFT		5
-+#define PCAP_BIT_AUXVREG_VAUX3_EN		pbit(PCAP_REG_AUXVREG, (1 << 7))
-+#define PCAP_AUXVREG_VAUX3_MASK			0x00000f00
-+#define PCAP_AUXVREG_VAUX3_SHIFT		8
-+#define PCAP_BIT_AUXVREG_VAUX4_EN		pbit(PCAP_REG_AUXVREG, (1 << 12))
-+#define PCAP_AUXVREG_VAUX4_MASK			0x00006000
-+#define PCAP_AUXVREG_VAUX4_SHIFT		13
-+#define PCAP_BIT_AUXVREG_VSIM2_EN		pbit(PCAP_REG_AUXVREG, (1 << 16))
-+#define PCAP_BIT_AUXVREG_VSIM_EN		pbit(PCAP_REG_AUXVREG, (1 << 17))
-+#define PCAP_BIT_AUXVREG_VSIM_0			pbit(PCAP_REG_AUXVREG, (1 << 18))
-+#define PCAP_BIT_AUXVREG_V_VIB_EN		pbit(PCAP_REG_AUXVREG, (1 << 19))
-+#define PCAP_AUXVREG_V_VIB_MASK			0x00300000
-+#define PCAP_AUXVREG_V_VIB_SHIFT		20
-+#define PCAP_BIT_AUXVREG_VAUX1_STBY		pbit(PCAP_REG_AUXVREG, (1 << 22))
-+#define PCAP_BIT_AUXVREG_VAUX1_LOWPWR		pbit(PCAP_REG_AUXVREG, (1 << 23))
-+#define PCAP_BIT_AUXVREG_SW3_STBY		pbit(PCAP_REG_AUXVREG, (1 << 24))
-+
-+#define PCAP_BATT_DAC_MASK			0x000000ff
-+#define PCAP_BATT_DAC_SHIFT			0
-+#define PCAP_BIT_BATT_B_FDBK			pbit(PCAP_REG_BATT, (1 << 8))
-+#define PCAP_BIT_BATT_EXT_ISENSE		pbit(PCAP_REG_BATT, (1 << 9))
-+#define PCAP_BATT_V_COIN_MASK			0x00003c00
-+#define PCAP_BATT_V_COIN_SHIFT			10
-+#define PCAP_BIT_BATT_I_COIN			pbit(PCAP_REG_BATT, (1 << 14))
-+#define PCAP_BIT_BATT_COIN_CH_EN		pbit(PCAP_REG_BATT, (1 << 15))
-+#define PCAP_BATT_EOL_SEL_MASK			0x000e0000
-+#define PCAP_BATT_EOL_SEL_SHIFT			17
-+#define PCAP_BIT_BATT_EOL_CMP_EN		pbit(PCAP_REG_BATT, (1 << 20))
-+#define PCAP_BIT_BATT_BATT_DET_EN		pbit(PCAP_REG_BATT, (1 << 21))
-+#define PCAP_BIT_BATT_THERMBIAS_CTRL		pbit(PCAP_REG_BATT, (1 << 22))
-+
-+#define PCAP_BIT_ADC1_ADEN			pbit(PCAP_REG_ADC1, (1 << 0))
-+#define PCAP_BIT_ADC1_RAND			pbit(PCAP_REG_ADC1, (1 << 1))
-+#define PCAP_BIT_ADC1_AD_SEL1			pbit(PCAP_REG_ADC1, (1 << 2))
-+#define PCAP_BIT_ADC1_AD_SEL2			pbit(PCAP_REG_ADC1, (1 << 3))
-+#define PCAP_ADC1_ADA1_MASK			0x00000070
-+#define PCAP_ADC1_ADA1_SHIFT			4
-+#define PCAP_ADC1_ADA2_MASK			0x00000380
-+#define PCAP_ADC1_ADA2_SHIFT			7
-+#define PCAP_ADC1_ATO_MASK			0x00003c00
-+#define PCAP_ADC1_ATO_SHIFT			10
-+#define PCAP_BIT_ADC1_ATOX			pbit(PCAP_REG_ADC1, (1 << 14))
-+#define PCAP_BIT_ADC1_MTR1			pbit(PCAP_REG_ADC1, (1 << 15))
-+#define PCAP_BIT_ADC1_MTR2			pbit(PCAP_REG_ADC1, (1 << 16))
-+#define PCAP_ADC1_TS_M_MASK			0x000e0000
-+#define PCAP_ADC1_TS_M_SHIFT			17
-+#define PCAP_BIT_ADC1_TS_REF_LOWPWR		pbit(PCAP_REG_ADC1, (1 << 20))
-+#define PCAP_BIT_ADC1_TS_REFENB			pbit(PCAP_REG_ADC1, (1 << 21))
-+#define PCAP_BIT_ADC1_BATT_I_POLARITY		pbit(PCAP_REG_ADC1, (1 << 22))
-+#define PCAP_BIT_ADC1_BATT_I_ADC		pbit(PCAP_REG_ADC1, (1 << 23))
-+
-+#define PCAP_ADC2_ADD1_MASK			0x000003ff
-+#define PCAP_ADC2_ADD1_SHIFT			0
-+#define PCAP_ADC2_ADD2_MASK			0x000ffc00
-+#define PCAP_ADC2_ADD2_SHIFT			10
-+#define PCAP_BIT_ADC2_ADINC1			pbit(PCAP_REG_ADC2, (1 << 20))
-+#define PCAP_BIT_ADC2_ADINC2			pbit(PCAP_REG_ADC2, (1 << 21))
-+#define PCAP_BIT_ADC2_ASC			pbit(PCAP_REG_ADC2, (1 << 22))
-+
-+#define PCAP_BIT_BUSCTRL_FSENB			0x50000001
-+#define PCAP_BIT_BUSCTRL_USB_SUSPEND		0x50000002
-+#define PCAP_BIT_BUSCTRL_USB_PU			0x50000004
-+#define PCAP_BIT_BUSCTRL_USB_PD			0x50000008
-+#define PCAP_BIT_BUSCTRL_VUSB_EN		0x50000010
-+#define PCAP_BIT_BUSCTRL_USB_PS			0x50000020
-+#define PCAP_BIT_BUSCTRL_VUSB_MSTR_EN		0x50000040
-+#define PCAP_BIT_BUSCTRL_VBUS_PD_ENB		0x50000080
-+#define PCAP_BIT_BUSCTRL_CURRLIM		0x50000100
-+#define PCAP_BIT_BUSCTRL_RS232ENB		0x50000200
-+#define PCAP_BIT_BUSCTRL_RS232_DIR		0x50000400
-+#define PCAP_BIT_BUSCTRL_SE0_CONN		0x50000800
-+#define PCAP_BIT_BUSCTRL_USB_PDM		0x50001000
-+#define PCAP_BIT_BUSCTRL_BUS_PRI_ADJ		0x51000000
-+
-+#define PCAP_BIT_PERIPH_BL_CTRL0		0x54000001
-+#define PCAP_BIT_PERIPH_BL_CTRL1		0x54000002
-+#define PCAP_BIT_PERIPH_BL_CTRL2		0x54000004
-+#define PCAP_BIT_PERIPH_BL_CTRL3		0x54000008
-+#define PCAP_BIT_PERIPH_BL_CTRL4		0x54000010
-+#define PCAP_BIT_PERIPH_LEDR_EN			0x54000020
-+#define PCAP_BIT_PERIPH_LEDG_EN			0x54000040
-+#define PCAP_BIT_PERIPH_LEDR_CTRL0		0x54000080
-+#define PCAP_BIT_PERIPH_LEDR_CTRL1		0x54000100
-+#define PCAP_BIT_PERIPH_LEDR_CTRL2		0x54000200
-+#define PCAP_BIT_PERIPH_LEDR_CTRL3		0x54000400
-+#define PCAP_BIT_PERIPH_LEDG_CTRL0		0x54000800
-+#define PCAP_BIT_PERIPH_LEDG_CTRL1		0x54001000
-+#define PCAP_BIT_PERIPH_LEDG_CTRL2		0x54002000
-+#define PCAP_BIT_PERIPH_LEDG_CTRL3		0x54004000
-+#define PCAP_BIT_PERIPH_LEDR_I0			0x54008000
-+#define PCAP_BIT_PERIPH_LEDR_I1			0x54010000
-+#define PCAP_BIT_PERIPH_LEDG_I0			0x54020000
-+#define PCAP_BIT_PERIPH_LEDG_I1			0x54040000
-+#define PCAP_BIT_PERIPH_SKIP			0x54080000
-+#define PCAP_BIT_PERIPH_BL2_CTRL0		0x54100000
-+#define PCAP_BIT_PERIPH_BL2_CTRL1		0x54200000
-+#define PCAP_BIT_PERIPH_BL2_CTRL2		0x54400000
-+#define PCAP_BIT_PERIPH_BL2_CTRL3		0x54800000
-+#define PCAP_BIT_PERIPH_BL2_CTRL4		0x55000000
-+
-+#define PCAP_BIT_LOWPWR_VAUX2_STBY		0x60000001
-+#define PCAP_BIT_LOWPWR_VAUX2_LOWPWR		0x60000002
-+#define PCAP_BIT_LOWPWR_VAUX3_STBY		0x60000004
-+#define PCAP_BIT_LOWPWR_VAUX3_LOWPWR		0x60000008
-+#define PCAP_BIT_LOWPWR_VAUX4_STBY		0x60000010
-+#define PCAP_BIT_LOWPWR_VAUX4_LOWPWR		0x60000020
-+#define PCAP_BIT_LOWPWR_VSIM_LOWPWR		0x60000040
-+#define PCAP_BIT_LOWPWR_VSIM2_LOWPWR		0x60000080
-+#define PCAP_BIT_LOWPWR_SW1_MODE00		0x60000100
-+#define PCAP_BIT_LOWPWR_SW1_MODE01		0x60000200
-+#define PCAP_BIT_LOWPWR_SW1_MODE10		0x60000400
-+#define PCAP_BIT_LOWPWR_SW1_MODE11		0x60000800
-+#define PCAP_BIT_LOWPWR_SW10_DVS		0x60001000
-+#define PCAP_BIT_LOWPWR_SW11_DVS		0x60002000
-+#define PCAP_BIT_LOWPWR_SW12_DVS		0x60004000
-+#define PCAP_BIT_LOWPWR_SW13_DVS		0x60008000
-+#define PCAP_BIT_LOWPWR_SW2_MODE00		0x60010000
-+#define PCAP_BIT_LOWPWR_SW2_MODE01		0x60020000
-+#define PCAP_BIT_LOWPWR_SW2_MODE10		0x60040000
-+#define PCAP_BIT_LOWPWR_SW2_MODE11		0x60080000
-+#define PCAP_BIT_LOWPWR_SW20_DVS		0x60100000
-+#define PCAP_BIT_LOWPWR_SW21_DVS		0x60200000
-+#define PCAP_BIT_LOWPWR_SW22_DVS		0x60400000
-+#define PCAP_BIT_LOWPWR_SW23_DVS		0x60800000
-+#define PCAP_BIT_LOWPWR_VC_STBY			0x61000000
-+
-+extern int ezx_pcap_write(u_int8_t, u_int32_t);
-+extern int ezx_pcap_read(u_int8_t, u_int32_t *);
-+extern int ezx_pcap_bit_set(u_int32_t, u_int8_t);
-+extern int ezx_pcap_bit_get(u_int32_t);
-+extern void ezx_pcap_vibrator_level(u_int32_t);
-+#endif
-Index: linux-2.6.21/include/asm-arm/arch-pxa/irqs.h
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/irqs.h	2007-08-31 22:28:17.000000000 -0300
-+++ linux-2.6.21/include/asm-arm/arch-pxa/irqs.h	2007-08-31 22:34:36.000000000 -0300
-@@ -85,7 +85,7 @@
-  * within sensible limits.
-  */
- #define IRQ_BOARD_START		(IRQ_GPIO(PXA_LAST_GPIO) + 1)
--#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-+#define IRQ_BOARD_END		(IRQ_BOARD_START + 22)
- 
- #define IRQ_SA1111_START	(IRQ_BOARD_END)
- #define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-@@ -176,7 +176,8 @@
- #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
- #elif defined(CONFIG_ARCH_LUBBOCK) || \
-       defined(CONFIG_MACH_LOGICPD_PXA270) || \
--      defined(CONFIG_MACH_MAINSTONE)
-+      defined(CONFIG_MACH_MAINSTONE) || \
-+      defined(CONFIG_PXA_EZX)
- #define NR_IRQS			(IRQ_BOARD_END)
- #else
- #define NR_IRQS			(IRQ_BOARD_START)
-@@ -222,3 +223,28 @@
- #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
- #define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
- #define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-+
-+/* EZX Interrupts (CONFIG_EZX) */
-+#define EZX_IRQ(x)             (IRQ_BOARD_START + (x))
-+#define EZX_IRQ_USB4V          EZX_IRQ(0) /* EMU */
-+#define EZX_IRQ_USB1V          EZX_IRQ(1) /* EMU */
-+#define EZX_IRQ_HEADJACK       EZX_IRQ(2) /* Audio connector */
-+#define EZX_IRQ_MIC            EZX_IRQ(3) /* Audio connector */
-+#define EZX_IRQ_ADCDONE        EZX_IRQ(4)
-+#define EZX_IRQ_TS             EZX_IRQ(5) /* TS touch */
-+#define EZX_IRQ_ADCDONE2       EZX_IRQ(6) /* TS x/y ADC ready */
-+#define EZX_IRQ_WH	       EZX_IRQ(7)
-+#define EZX_IRQ_WL	       EZX_IRQ(8)
-+#define EZX_IRQ_ONOFF	       EZX_IRQ(9)
-+#define EZX_IRQ_ONOFF2	       EZX_IRQ(10)
-+#define EZX_IRQ_MOBPORT	       EZX_IRQ(11)
-+#define EZX_IRQ_TODA	       EZX_IRQ(12)
-+#define EZX_IRQ_1HZ	       EZX_IRQ(13)
-+#define EZX_IRQ_MNEXB	       EZX_IRQ(14)
-+#define EZX_IRQ_ST	       EZX_IRQ(15)
-+#define EZX_IRQ_PC	       EZX_IRQ(16)
-+#define EZX_IRQ_SYSRST	       EZX_IRQ(17)
-+#define EZX_IRQ_SOFTRESET      EZX_IRQ(18)
-+#define EZX_IRQ_EOL	       EZX_IRQ(19)
-+#define EZX_IRQ_CLK	       EZX_IRQ(20)
-+#define EZX_IRQ_WARM	       EZX_IRQ(21)
-Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig	2007-08-31 22:33:05.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig	2007-09-07 11:06:01.000000000 -0300
-@@ -105,6 +105,9 @@
- config EZX_BP
- 	bool "BP Control code for EZX Platform"
- 
-+config EZX_PCAP
-+	bool "PCAP Support"
-+
- endif
- 
- endmenu
-Index: linux-2.6.21/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile	2007-08-31 22:33:05.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Makefile	2007-09-07 11:06:01.000000000 -0300
-@@ -25,6 +25,7 @@
- obj-$(CONFIG_PXA_EZX_A1200)	+= ezx-a1200.o
- obj-$(CONFIG_PXA_EZX_E6)	+= ezx-e6.o
- obj-$(CONFIG_EZX_BP)		+= ezx-bp.o
-+obj-$(CONFIG_EZX_PCAP)		+= ezx-pcap.o
- 
- # Support for blinky lights
- led-y := leds.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch
deleted file mode 100755
index 05748e681c..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-pm.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/pxa27x.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/pxa27x.c	2007-09-21 23:57:40.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/pxa27x.c	2007-09-21 23:57:49.000000000 -0300
-@@ -22,6 +22,10 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/ohci.h>
- 
-+#ifdef CONFIG_PXA_EZX
-+#include <asm/arch/ezx.h>
-+#endif
-+
- #include "generic.h"
- 
- /* Crystal clock: 13MHz */
-@@ -156,7 +160,13 @@
- 		break;
- 	case PM_SUSPEND_MEM:
- 		/* set resume return address */
-+#ifdef CONFIG_PXA_EZX
-+		/* set EZX flags for blob - WM */
-+		*(unsigned long *)(phys_to_virt(RESUME_ADDR)) = virt_to_phys(pxa_cpu_resume);
-+		*(unsigned long *)(phys_to_virt(FLAG_ADDR)) = SLEEP_FLAG;
-+#else
- 		PSPR = virt_to_phys(pxa_cpu_resume);
-+#endif
- 		pxa_cpu_suspend(PWRMODE_SLEEP);
- 		break;
- 	}
-Index: linux-2.6.21/arch/arm/mach-pxa/pm.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/pm.c	2007-09-21 23:57:40.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/pm.c	2007-09-21 23:57:49.000000000 -0300
-@@ -24,6 +24,10 @@
- #include <asm/arch/lubbock.h>
- #include <asm/mach/time.h>
- 
-+#ifdef CONFIG_PXA_EZX
-+#include <asm/arch/ezx.h>
-+#endif
-+
- 
- /*
-  * Debug macros
-@@ -152,8 +156,12 @@
- 	}
- 
- 	/* ensure not to come back here if it wasn't intended */
-+#ifdef CONFIG_PXA_EZX
-+        *(unsigned long *)(phys_to_virt(RESUME_ADDR)) = 0;
-+        *(unsigned long *)(phys_to_virt(FLAG_ADDR)) = OFF_FLAG;
-+#else
- 	PSPR = 0;
--
-+#endif
- 	/* restore registers */
- 	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
- 	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx.c	2007-09-21 23:57:48.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx.c	2007-09-22 00:07:34.000000000 -0300
-@@ -19,6 +19,7 @@
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/ohci.h>
- #include <asm/arch/ezx.h>
-+#include <asm/arch/system.h>
- 
- #include "generic.h"
- 
-@@ -122,8 +123,53 @@
- 	&ezxbp_device,
- };
- 
-+/* PM */
-+extern int bp_handshake_passed(void);
-+
-+static void ezx_reboot_poweroff(char mode)
-+{
-+	*(unsigned long *)(phys_to_virt(BPSIG_ADDR)) = NO_FLAG;
-+	cpu_proc_fin();
-+
-+#ifdef CONFIG_EZX_BP
-+	if (pxa_gpio_get_value(GPIO_BB_WDI) == 0) {
-+		*(unsigned long *)(phys_to_virt(BPSIG_ADDR)) = WDI_FLAG;
-+
-+		/* reset BP */
-+		pxa_gpio_set_value(GPIO_BB_RESET, 0);
-+		mdelay(1);
-+		pxa_gpio_set_value(GPIO_BB_RESET, 1);
-+
-+		if (mode == 'z') {
-+			arch_reset('h');
-+			while(1);
-+		}
-+	}
-+#endif
-+	if (mode == 'z')
-+		/* Panic! Ask PCAP to turn both processors off */
-+		pxa_gpio_set_value(GPIO_WDI_AP, 0);
-+	else
-+		arm_machine_restart(mode);
-+
-+	while(1);
-+}
-+
-+static inline void ezx_poweroff(void)
-+{
-+	ezx_reboot_poweroff('z');
-+}
-+
-+static inline void ezx_restart(char mode)
-+{
-+	ezx_reboot_poweroff(mode);
-+}
-+
- static int __init ezx_init(void)
- {
-+	pm_power_off = ezx_poweroff;
-+	arm_pm_restart = ezx_restart;
-+
- 	CKEN = CKEN9_OSTIMER | CKEN22_MEMC;
- 
- 	pxa_gpio_mode(GPIO_ICL_FFRXD_MD);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/ezx-serial-bug-workaround.patch b/packages/linux/linux-ezx-2.6.21/patches/ezx-serial-bug-workaround.patch
deleted file mode 100755
index 9f30cc35fe..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/ezx-serial-bug-workaround.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-Work around some errata in the pxa serial code (copied from motorolas 2.4.x tree)
-
-Index: linux-2.6.20.7/drivers/serial/pxa.c
-===================================================================
---- linux-2.6.20.7.orig/drivers/serial/pxa.c	2007-04-21 13:57:46.000000000 -0300
-+++ linux-2.6.20.7/drivers/serial/pxa.c	2007-04-21 14:05:03.000000000 -0300
-@@ -29,6 +29,10 @@
- #define SUPPORT_SYSRQ
- #endif
- 
-+#define pxa_buggy_port(x) ({ \
-+	int cpu_ver; asm("mrc%? p15, 0, %0, c0, c0" : "=r" (cpu_ver)); \
-+	((x) == PORT_PXA && (cpu_ver & ~1) == 0x69052100); })
-+
- #include <linux/module.h>
- #include <linux/ioport.h>
- #include <linux/init.h>
-@@ -195,7 +199,7 @@
- 	if (uart_circ_empty(xmit))
- 		serial_pxa_stop_tx(&up->port);
- }
--
-+static inline irqreturn_t serial_pxa_irq(int, void *);
- static void serial_pxa_start_tx(struct uart_port *port)
- {
- 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-@@ -203,6 +207,8 @@
- 	if (!(up->ier & UART_IER_THRI)) {
- 		up->ier |= UART_IER_THRI;
- 		serial_out(up, UART_IER, up->ier);
-+		if (pxa_buggy_port(up->port.type))
-+			serial_pxa_irq(up->port.irq, NULL);
- 	}
- }
- 
-@@ -298,6 +304,9 @@
- 
- 	mcr |= up->mcr;
- 
-+	if (pxa_buggy_port(up->port.type) && up->port.irq != 0)
-+		mcr ^= UART_MCR_OUT2;
-+
- 	serial_out(up, UART_MCR, mcr);
- }
- 
diff --git a/packages/linux/linux-ezx-2.6.21/patches/i2c-core-fix-a1200.patch b/packages/linux/linux-ezx-2.6.21/patches/i2c-core-fix-a1200.patch
deleted file mode 100644
index bd69e38bd7..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/i2c-core-fix-a1200.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: linux-2.6.21/drivers/i2c/i2c-core.c
-===================================================================
---- linux-2.6.21.orig/drivers/i2c/i2c-core.c	2007-08-20 21:59:45.000000000 +0800
-+++ linux-2.6.21/drivers/i2c/i2c-core.c	2007-08-20 22:03:12.000000000 +0800
-@@ -365,8 +365,10 @@
- 		list_for_each(item,&adapters) {
- 			adapter = list_entry(item, struct i2c_adapter, list);
- 			driver->attach_adapter(adapter);
-+			goto out;  // Alex added for fix the bug otherwise system will be crashed. FIXME
- 		}
- 	}
-+out:
- 
- 	mutex_unlock(&core_lists);
- 	return 0;
diff --git a/packages/linux/linux-ezx-2.6.21/patches/index.html b/packages/linux/linux-ezx-2.6.21/patches/index.html
deleted file mode 100644
index 6cd7a62548..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/index.html
+++ /dev/null
@@ -1,72 +0,0 @@
-<html><head><title>Revision 2064: /trunk/src/kernel-2.6/patches</title></head>
-<body>
- <h2>Revision 2064: /trunk/src/kernel-2.6/patches</h2>
- <ul>
-  <li><a href="../">..</a></li>
-  <li><a href="Makefile.OpenEZX">Makefile.OpenEZX</a></li>
-  <li><a href="a1200-eoc.patch">a1200-eoc.patch</a></li>
-  <li><a href="a1200-flip.patch">a1200-flip.patch</a></li>
-  <li><a href="a1200-kbd.patch">a1200-kbd.patch</a></li>
-  <li><a href="a1200-mci.patch">a1200-mci.patch</a></li>
-  <li><a href="a1200-pcap.patch">a1200-pcap.patch</a></li>
-  <li><a href="a1200-ts.patch">a1200-ts.patch</a></li>
-  <li><a href="a780-emu.patch">a780-emu.patch</a></li>
-  <li><a href="a780-flip.patch">a780-flip.patch</a></li>
-  <li><a href="a780-kbd.patch">a780-kbd.patch</a></li>
-  <li><a href="a780-leds.patch">a780-leds.patch</a></li>
-  <li><a href="a780-mci.patch">a780-mci.patch</a></li>
-  <li><a href="a780-pcap.patch">a780-pcap.patch</a></li>
-  <li><a href="a780-ts.patch">a780-ts.patch</a></li>
-  <li><a href="a780-vibrator.patch">a780-vibrator.patch</a></li>
-  <li><a href="asoc-fix-loopback.patch">asoc-fix-loopback.patch</a></li>
-  <li><a href="asoc-pxa-ssp.patch">asoc-pxa-ssp.patch</a></li>
-  <li><a href="defconfig-a1200">defconfig-a1200</a></li>
-  <li><a href="defconfig-a780">defconfig-a780</a></li>
-  <li><a href="defconfig-e2">defconfig-e2</a></li>
-  <li><a href="defconfig-e6">defconfig-e6</a></li>
-  <li><a href="defconfig-e680">defconfig-e680</a></li>
-  <li><a href="dmesg-a780.log">dmesg-a780.log</a></li>
-  <li><a href="e6-eoc.patch">e6-eoc.patch</a></li>
-  <li><a href="e6-mci.patch">e6-mci.patch</a></li>
-  <li><a href="e6-pcap.patch">e6-pcap.patch</a></li>
-  <li><a href="e6-ts.patch">e6-ts.patch</a></li>
-  <li><a href="e680-emu.patch">e680-emu.patch</a></li>
-  <li><a href="e680-kbd.patch">e680-kbd.patch</a></li>
-  <li><a href="e680-leds.patch">e680-leds.patch</a></li>
-  <li><a href="e680-locksw.patch">e680-locksw.patch</a></li>
-  <li><a href="e680-mci.patch">e680-mci.patch</a></li>
-  <li><a href="e680-pcap.patch">e680-pcap.patch</a></li>
-  <li><a href="e680-ts.patch">e680-ts.patch</a></li>
-  <li><a href="ezx-asoc.patch">ezx-asoc.patch</a></li>
-  <li><a href="ezx-backlight.patch">ezx-backlight.patch</a></li>
-  <li><a href="ezx-bp.patch">ezx-bp.patch</a></li>
-  <li><a href="ezx-core.patch">ezx-core.patch</a></li>
-  <li><a href="ezx-emu.patch">ezx-emu.patch</a></li>
-  <li><a href="ezx-enable-stuart.patch">ezx-enable-stuart.patch</a></li>
-  <li><a href="ezx-eoc.patch">ezx-eoc.patch</a></li>
-  <li><a href="ezx-mtd-map.patch">ezx-mtd-map.patch</a></li>
-  <li><a href="ezx-pcap.patch">ezx-pcap.patch</a></li>
-  <li><a href="ezx-pm.patch">ezx-pm.patch</a></li>
-  <li><a href="ezx-serial-bug-workaround.patch">ezx-serial-bug-workaround.patch</a></li>
-  <li><a href="mtdfix.patch">mtdfix.patch</a></li>
-  <li><a href="mux-fix-init-errorpath.patch">mux-fix-init-errorpath.patch</a></li>
-  <li><a href="mux-fix-makefile.patch">mux-fix-makefile.patch</a></li>
-  <li><a href="mux-fix-tty-driver.patch">mux-fix-tty-driver.patch</a></li>
-  <li><a href="mux-fix.patch">mux-fix.patch</a></li>
-  <li><a href="mux-ifdef-ezx-features.patch">mux-ifdef-ezx-features.patch</a></li>
-  <li><a href="mux-linux-2.6.21-fix.patch">mux-linux-2.6.21-fix.patch</a></li>
-  <li><a href="mux-remove-flipbuffers.patch">mux-remove-flipbuffers.patch</a></li>
-  <li><a href="mux-remove-get_halted_bit.patch">mux-remove-get_halted_bit.patch</a></li>
-  <li><a href="mux-remove-usbh_finished_resume.patch">mux-remove-usbh_finished_resume.patch</a></li>
-  <li><a href="mux_cli.patch">mux_cli.patch</a></li>
-  <li><a href="mux_debug.patch">mux_debug.patch</a></li>
-  <li><a href="patch-2.6.21.4">patch-2.6.21.4</a></li>
-  <li><a href="pcap-ts.patch">pcap-ts.patch</a></li>
-  <li><a href="pxa-kbd.patch">pxa-kbd.patch</a></li>
-  <li><a href="pxa27x-udc-fix-a1200.patch">pxa27x-udc-fix-a1200.patch</a></li>
-  <li><a href="pxa27x-udc-support.2.patch">pxa27x-udc-support.2.patch</a></li>
-  <li><a href="pxa27x_overlay-r5.patch">pxa27x_overlay-r5.patch</a></li>
-  <li><a href="series">series</a></li>
- </ul>
- <hr noshade><em>Powered by <a href="http://subversion.tigris.org/">Subversion</a> version 1.1.4 (r13838).</em>
-</body></html>
\ No newline at end of file
diff --git a/packages/linux/linux-ezx-2.6.21/patches/lcd_18BPP_support.diff b/packages/linux/linux-ezx-2.6.21/patches/lcd_18BPP_support.diff
deleted file mode 100644
index a0d89bfee5..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/lcd_18BPP_support.diff
+++ /dev/null
@@ -1,270 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c	2007-08-18 18:35:12.000000000 +0800
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c	2007-08-18 18:36:38.000000000 +0800
-@@ -122,7 +122,7 @@
-        .pixclock = 192308,
-        .xres = 240,
-        .yres = 320,
--       .bpp = 8,
-+       .bpp = 18,
-        .hsync_len = 10,
-        .left_margin = 20,
-        .right_margin = 10,
-@@ -135,8 +135,8 @@
- static struct pxafb_mach_info a1200_fb_info = {
-        .modes = &mode_a1200,
-        .num_modes = 1,
--       .lccr0 = 0x022008B8,
--       .lccr3 = 0xC130FF13,
-+       .lccr0 = 0x002008b8,
-+       .lccr3 = 0xC630FF13,
-        .pxafb_backlight_power = ezx_backlight_power,
-        .pxafb_lcd_power = &ezx_lcd_power,
- };
-Index: linux-2.6.21/drivers/video/cfbfillrect.c
-===================================================================
---- linux-2.6.21.orig/drivers/video/cfbfillrect.c	2007-08-18 18:38:36.000000000 +0800
-+++ linux-2.6.21/drivers/video/cfbfillrect.c	2007-08-18 18:39:03.000000000 +0800
-@@ -87,7 +87,10 @@
- 		return 0x00001001ul*pixel;
- 	case 16:
- 		return 0x00010001ul*pixel;
-+	case 18:
-+	case 19:
- 	case 24:
-+	case 25:
- 		return 0x00000001ul*pixel;
- 	case 32:
- 		return 0x00000001ul*pixel;
-Index: linux-2.6.21/drivers/video/pxafb.c
-===================================================================
---- linux-2.6.21.orig/drivers/video/pxafb.c	2007-08-18 17:58:11.000000000 +0800
-+++ linux-2.6.21/drivers/video/pxafb.c	2007-08-18 18:46:50.000000000 +0800
-@@ -9,6 +9,8 @@
-  *  which in turn is
-  *   Based on acornfb.c Copyright (C) Russell King.
-  *
-+ *   Added 18,19,24,25 BPP support by Alex Zhang <celeber2@gmail.com>
-+ *
-  * This file is subject to the terms and conditions of the GNU General Public
-  * License.  See the file COPYING in the main directory of this archive for
-  * more details.
-@@ -190,6 +192,10 @@
-         case 4:  ret = LCCR3_4BPP; break;
-         case 8:  ret = LCCR3_8BPP; break;
-         case 16: ret = LCCR3_16BPP; break;
-+		case 18: ret = LCCR3_18BPP; break;
-+        case 19: ret = LCCR3_19BPP; break;
-+        case 24: ret = LCCR3_24BPP; break;
-+        case 25: ret = LCCR3_25BPP; break; 
-         }
-         return ret;
- }
-@@ -274,6 +280,8 @@
- 	if (var->yres < MIN_YRES)
- 		var->yres = MIN_YRES;
- 
-+	if (var->bits_per_pixel == 32) var->bits_per_pixel = 18; // ALEX cheats Xserver
-+
- 	if (inf->fixed_modes) {
- 		struct pxafb_mode_info *mode;
- 
-@@ -306,6 +314,26 @@
- 		var->green.offset = 5;  var->green.length = 6;
- 		var->blue.offset  = 0;  var->blue.length  = 5;
- 		var->transp.offset = var->transp.length = 0;
-+	} else if (var->bits_per_pixel == 18) {
-+		var->red.offset   = 12; var->red.length   = 6;
-+		var->green.offset = 6;  var->green.length = 6;
-+		var->blue.offset  = 0;  var->blue.length  = 6;
-+		var->transp.offset = var->transp.length = 0;
-+	} else if (var->bits_per_pixel == 19) {
-+		var->red.offset   = 12; var->red.length   = 6;
-+		var->green.offset = 6;  var->green.length = 6;
-+		var->blue.offset  = 0;  var->blue.length  = 6;
-+		var->transp.offset= 18; var->transp.length = 1;
-+	} else if (var->bits_per_pixel == 24) {
-+		var->red.offset   = 16; var->red.length   = 8;
-+		var->green.offset = 8;  var->green.length = 8;
-+		var->blue.offset  = 0;  var->blue.length  = 8;
-+		var->transp.offset = var->transp.length = 0;
-+	} else if (var->bits_per_pixel == 25) {
-+		var->red.offset   = 16; var->red.length   = 8;
-+		var->green.offset = 8;  var->green.length = 8;
-+		var->blue.offset  = 0;  var->blue.length  = 8;
-+		var->transp.offset= 24; var->transp.length = 1;
- 	} else {
- 		var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
- 		var->red.length   = 8;
-@@ -341,7 +369,12 @@
- 
- 	pr_debug("pxafb: set_par\n");
- 
--	if (var->bits_per_pixel == 16)
-+	if (var->bits_per_pixel == 16
-+     || var->bits_per_pixel == 18 
-+     || var->bits_per_pixel == 19
-+     || var->bits_per_pixel == 24 
-+     || var->bits_per_pixel == 25 
-+       )	
- 		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
- 	else if (!fbi->cmap_static)
- 		fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
-@@ -354,12 +387,25 @@
- 		fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
- 	}
- 
--	fbi->fb.fix.line_length = var->xres_virtual *
--				  var->bits_per_pixel / 8;
--	if (var->bits_per_pixel == 16)
--		fbi->palette_size = 0;
--	else
--		fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
-+   	switch (var->bits_per_pixel) {
-+    	case 16:
-+	       	fbi->fb.fix.line_length = var->xres_virtual * 2;
-+	       	fbi->palette_size = 0;
-+        	break;
-+    	case 18:
-+	   	case 19:
-+	       	fbi->fb.fix.line_length = var->xres_virtual * 3;
-+	       	fbi->palette_size = 0;
-+        	break;
-+    	case 24:
-+    	case 25:
-+	       	fbi->fb.fix.line_length = var->xres_virtual * 4;
-+        	fbi->palette_size = 0;
-+        	break;
-+    	default:
-+        	fbi->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
-+        	fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
-+   	}
- 
- 	palette_mem_size = fbi->palette_size * sizeof(u16);
- 
-@@ -373,8 +419,13 @@
- 	 */
- 	pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
- 
--	if (fbi->fb.var.bits_per_pixel == 16)
--		fb_dealloc_cmap(&fbi->fb.cmap);
-+	if (fbi->fb.var.bits_per_pixel == 16
-+     || fbi->fb.var.bits_per_pixel == 18 
-+     || fbi->fb.var.bits_per_pixel == 19
-+     || fbi->fb.var.bits_per_pixel == 24 
-+     || fbi->fb.var.bits_per_pixel == 25 
-+       )	
-+   		fb_dealloc_cmap(&fbi->fb.cmap);
- 	else
- 		fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
- 
-@@ -582,6 +633,9 @@
- 	case 4:
- 	case 8:
- 	case 16:
-+	case 18:
-+	case 24:
-+	case 25:
- 		break;
- 	default:
- 		printk(KERN_ERR "%s: invalid bit depth %d\n",
-@@ -678,7 +732,12 @@
- 	fbi->dmadesc_palette_cpu->fidr  = 0;
- 	fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
- 
--	if (var->bits_per_pixel == 16) {
-+	if (var->bits_per_pixel == 16
-+     || var->bits_per_pixel == 18 
-+     || var->bits_per_pixel == 19
-+     || var->bits_per_pixel == 24 
-+     || var->bits_per_pixel == 25 
-+       ) {
- 		/* palette shouldn't be loaded in true-color mode */
- 		fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
- 		fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
-@@ -786,6 +845,11 @@
- 
- 	for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
- 		pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
-+	if (fbi->fb.var.bits_per_pixel == 18) {
-+		pxa_gpio_mode(GPIO86_LDD_16_MD);
-+		pxa_gpio_mode(GPIO87_LDD_17_MD);
-+	}
-+		
- 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
- 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
- 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-@@ -1154,9 +1218,17 @@
- 	fbi->task_state			= (u_char)-1;
- 
- 	for (i = 0; i < inf->num_modes; i++) {
--		smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8;
-+		if (mode[i].bpp <= 16)      /* 8, 16 bpp */
-+			smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8;
-+		else if (mode[i].bpp > 19)  /* 24, 25 bpp */
-+			smemlen = mode[i].xres * mode[i].yres * 4;
-+		else                        /* 18, 19 bpp */
-+							    	/* packed format */
-+			smemlen = mode[i].xres * mode[i].yres * 3;
-+
- 		if (smemlen > fbi->fb.fix.smem_len)
- 			fbi->fb.fix.smem_len = smemlen;
-+		dev_dbg("ALEX::bpp=%d, smemlen=%d, fbi->fb.fix.smem_len=%d\n", mode[i].bpp, smemlen, fbi->fb.fix.smem_len);
- 	}
- 
- 	init_waitqueue_head(&fbi->ctrlr_wait);
-@@ -1225,6 +1297,10 @@
- 				case 4:
- 				case 8:
- 				case 16:
-+           		case 18:
-+          		case 19:
-+          		case 24:
-+           		case 25:
- 					inf->modes[0].bpp = bpp;
- 					dev_info(dev, "overriding bit depth: %d\n", bpp);
- 					break;
-@@ -1423,6 +1499,9 @@
- 	 */
- 	set_ctrlr_state(fbi, C_ENABLE);
- 
-+	LCCR4 |= (1 << 31);
-+	LCCR4 |= (5 << 17);
-+
- 	return 0;
- 
- failed:
-Index: linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/pxa-regs.h	2007-08-18 18:26:01.000000000 +0800
-+++ linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h	2007-08-18 18:32:29.000000000 +0800
-@@ -1485,6 +1485,8 @@
- #define GPIO84_NSSP_TX      	(84 | GPIO_ALT_FN_1_OUT)
- #define GPIO84_NSSP_RX      	(84 | GPIO_ALT_FN_2_IN)
- #define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
-+#define GPIO86_LDD_16_MD    (86 | GPIO_ALT_FN_2_OUT)
-+#define GPIO87_LDD_17_MD    (87 | GPIO_ALT_FN_2_OUT)
- #define GPIO88_SRXD2_MD		(88 | GPIO_ALT_FN_2_IN)
- #define GPIO89_SRXD3_MD		(89 | GPIO_ALT_FN_1_IN)
- #define GPIO90_USB_P3_5		(90 | GPIO_ALT_FN_2_IN)
-@@ -1869,6 +1871,7 @@
- #define LCCR1		__REG(0x44000004)  /* LCD Controller Control Register 1 */
- #define LCCR2		__REG(0x44000008)  /* LCD Controller Control Register 2 */
- #define LCCR3		__REG(0x4400000C)  /* LCD Controller Control Register 3 */
-+#define LCCR4		__REG(0x44000010)  /* LCD Controller Control Register 4 */
- #define DFBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
- #define DFBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
- #define LCSR		__REG(0x44000038)  /* LCD Controller Status Register */
-@@ -1881,6 +1884,11 @@
- #define LCCR3_4BPP (2 << 24)
- #define LCCR3_8BPP (3 << 24)
- #define LCCR3_16BPP (4 << 24)
-+#define LCCR3_18BPP_UNPACKED (5 << 24)
-+#define LCCR3_18BPP (6 << 24) 
-+#define LCCR3_19BPP (8 << 24)  
-+#define LCCR3_24BPP (9 << 24) 
-+#define LCCR3_25BPP (10<< 24)
- 
- #define FDADR0		__REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
- #define FSADR0		__REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mtdfix.patch b/packages/linux/linux-ezx-2.6.21/patches/mtdfix.patch
deleted file mode 100644
index 89a8402681..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mtdfix.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- /tmp/cacheflush.h	2007-09-10 15:22:58.188856413 +0200
-+++ linux-2.6.21/include/asm-arm/cacheflush.h	2007-09-10 15:23:14.009757994 +0200
-@@ -418,6 +418,14 @@
-  */
- #define flush_icache_page(vma,page)	do { } while (0)
- 
-+inline static void flush_ioremap_region(unsigned long phys, void __iomem *virt,
-+                                        unsigned offset, size_t size)
-+{
-+       const void *start = virt + offset;
-+       dmac_inv_range(start, start + size);
-+}
-+
-+
- #define __cacheid_present(val)		(val != read_cpuid(CPUID_ID))
- #define __cacheid_vivt(val)		((val & (15 << 25)) != (14 << 25))
- #define __cacheid_vipt(val)		((val & (15 << 25)) == (14 << 25))
---- /tmp/ezx-flash.c	2007-09-10 15:22:58.192856640 +0200
-+++ linux-2.6.21/drivers/mtd/maps/ezx-flash.c	2007-09-10 15:23:24.878377362 +0200
-@@ -21,6 +21,8 @@
- #include <linux/dma-mapping.h>
- #include <linux/slab.h>
- 
-+#include <asm/cacheflush.h>
-+
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/map.h>
- #include <linux/mtd/partitions.h>
-@@ -51,11 +53,10 @@
- 		"sub pc, pc #4"
- 		:"=r"(j));
- #else
--	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
-+        flush_ioremap_region(map->phys, map->cached, from, len);
- #endif
- }
- 
--
- struct map_info pxa27x_map = {
- 	.name		= "PXA27x flash",
- 	.size		= WINDOW_SIZE,
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-fix-init-errorpath.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-fix-init-errorpath.patch
deleted file mode 100755
index 716ef86fd1..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-fix-init-errorpath.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c	2007-01-17 00:10:32.000000000 +0100
-+++ linux-2.6.16/drivers/char/ts0710_mux_usb.c	2007-01-17 00:42:23.000000000 +0100
-@@ -811,7 +811,6 @@
- 	/*init the related mux interface*/
- 	if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) {
- 		err("usb_ipc_init: Out of memory.");
--		usb_deregister(&usb_ipc_driver);
- 		return -ENOMEM;
- 	}
- 	bvd_dbg("usb_ipc_init: Address of bvd_ipc:%p", bvd_ipc);
-@@ -819,7 +818,6 @@
- 	if (!(bvd_ipc->xmit.buf = kmalloc(IPC_USB_XMIT_SIZE, GFP_KERNEL))) {
- 		err("usb_ipc_init: Not enough memory for the input buffer.");
- 		kfree(bvd_ipc);
--		usb_deregister(&usb_ipc_driver);
- 		return -ENOMEM;
- 	}
- 	bvd_dbg("usb_ipc_init: bvd_ipc->xmit.buf address:%p",
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-fix-makefile.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-fix-makefile.patch
deleted file mode 100755
index 31452da847..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-fix-makefile.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: linux-2.6.21/drivers/char/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/char/Makefile	2007-04-26 20:09:29.000000000 +0200
-+++ linux-2.6.21/drivers/char/Makefile	2007-04-26 20:09:46.000000000 +0200
-@@ -104,7 +104,8 @@
- obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
- obj-$(CONFIG_TCG_TPM)		+= tpm/
- 
--obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o ts0710_mux_usb.o
-+obj-$(CONFIG_TS0710_MUX_USB) += ts0710_mux_usb.o
-+obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o
- 
- 
- # Files generated that shall be removed upon make clean
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-fix-tty-driver.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-fix-tty-driver.patch
deleted file mode 100755
index 2e1aabd952..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-fix-tty-driver.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-Index: linux-2.6.20.7/drivers/char/ts0710_mux.c
-===================================================================
---- linux-2.6.20.7.orig/drivers/char/ts0710_mux.c	2007-04-22 10:51:31.000000000 +0200
-+++ linux-2.6.20.7/drivers/char/ts0710_mux.c	2007-04-22 10:53:05.000000000 +0200
-@@ -241,7 +241,8 @@
- static volatile __u8 mux_recv_info_flags[NR_MUXS];
- static mux_recv_struct *mux_recv_queue = NULL;
- 
--static struct tty_driver mux_driver;
-+// Local for 2.6?
-+static struct tty_driver *mux_driver;
- 
- #ifdef USB_FOR_MUX
- #define COMM_FOR_MUX_DRIVER usb_for_mux_driver
-@@ -3007,6 +3008,7 @@
- #else
- 	mux_tty[line]++;
- 	dlci = tty2dlci[line];
-+	mux_table[line] = tty;
- 
- /*  if( dlci == 1 ) { */
- 	/* Open server channel 0 first */
-@@ -3087,6 +3089,7 @@
- 		}
- 	}
- 
-+
- 	retval = 0;
- #endif
-       out:
-@@ -3894,43 +3897,50 @@
- 	INIT_WORK(&receive_tqueue, receive_worker, NULL);
- 	INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL);
- 
--	memset(&mux_driver, 0, sizeof(struct tty_driver));
--	memset(&mux_tty, 0, sizeof(mux_tty));
--	mux_driver.magic = TTY_DRIVER_MAGIC;
--	mux_driver.driver_name = "ts0710mux";
--	mux_driver.name = "ts0710mux";
--	mux_driver.major = TS0710MUX_MAJOR;
--	mux_driver.minor_start = TS0710MUX_MINOR_START;
--	mux_driver.num = NR_MUXS;
--	mux_driver.type = TTY_DRIVER_TYPE_SERIAL;
--	mux_driver.subtype = SERIAL_TYPE_NORMAL;
--	mux_driver.init_termios = tty_std_termios;
--	mux_driver.init_termios.c_iflag = 0;
--	mux_driver.init_termios.c_oflag = 0;
--	mux_driver.init_termios.c_cflag = B38400 | CS8 | CREAD;
--	mux_driver.init_termios.c_lflag = 0;
--	mux_driver.flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
--
--	mux_driver.ttys = mux_table;
--	mux_driver.termios = mux_termios;
--	mux_driver.termios_locked = mux_termios_locked;
-+	mux_driver = alloc_tty_driver(NR_MUXS);
-+	if (!mux_driver)
-+		return -ENOMEM;
-+
-+	mux_driver->owner = THIS_MODULE;
-+	mux_driver->driver_name = "ts0710mux";
-+	mux_driver->name = "mux";
-+	mux_driver->devfs_name = "mux";
-+	mux_driver->major = TS0710MUX_MAJOR;
-+	mux_driver->minor_start = TS0710MUX_MINOR_START;
-+	mux_driver->type = TTY_DRIVER_TYPE_SERIAL;
-+	mux_driver->subtype = SERIAL_TYPE_NORMAL;
-+	mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
-+
-+	mux_driver->init_termios = tty_std_termios;
-+	mux_driver->init_termios.c_iflag = 0;
-+	mux_driver->init_termios.c_oflag = 0;
-+	mux_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
-+	mux_driver->init_termios.c_lflag = 0;
-+
-+//	mux_driver.ttys = mux_table;
-+	mux_driver->termios = mux_termios;
-+	mux_driver->termios_locked = mux_termios_locked;
- //  mux_driver.driver_state = mux_state;
--	mux_driver.other = NULL;
-+	mux_driver->other = NULL;
- 
--	mux_driver.open = mux_open;
--	mux_driver.close = mux_close;
--	mux_driver.write = mux_write;
--	mux_driver.write_room = mux_write_room;
--	mux_driver.flush_buffer = mux_flush_buffer;
--	mux_driver.chars_in_buffer = mux_chars_in_buffer;
--	mux_driver.throttle = mux_throttle;
--	mux_driver.unthrottle = mux_unthrottle;
--	mux_driver.ioctl = mux_ioctl;
--	mux_driver.owner = THIS_MODULE;
-+	mux_driver->open = mux_open;
-+	mux_driver->close = mux_close;
-+	mux_driver->write = mux_write;
-+	mux_driver->write_room = mux_write_room;
-+	mux_driver->flush_buffer = mux_flush_buffer;
-+	mux_driver->chars_in_buffer = mux_chars_in_buffer;
-+	mux_driver->throttle = mux_throttle;
-+	mux_driver->unthrottle = mux_unthrottle;
-+	mux_driver->ioctl = mux_ioctl;
- 
--	if (tty_register_driver(&mux_driver))
-+	// FIXME: No panic() here
-+	if (tty_register_driver(mux_driver))
- 		panic("Couldn't register mux driver");
- 
-+	for (j=0; j<NR_MUXS; j++)
-+		tty_register_device(mux_driver, j, NULL);
-+
-+
- 	COMM_MUX_DISPATCHER = mux_dispatcher;
- 	COMM_MUX_SENDER = mux_sender;
- 
-@@ -3964,7 +3974,10 @@
- 		mux_recv_info[j] = 0;
- 	}
- 
--	if (tty_unregister_driver(&mux_driver))
-+	for (j=0; j<NR_MUXS; j++)
-+		tty_unregister_device(mux_driver, j);
-+
-+	if (tty_unregister_driver(mux_driver))
- 		panic("Couldn't unregister mux driver");
- }
- 
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-fix.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-fix.patch
deleted file mode 100755
index b820762f41..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-fix.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c	2007-04-21 18:07:45.000000000 +0200
-+++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c	2007-04-21 20:55:13.000000000 +0200
-@@ -626,7 +626,6 @@
- 	}
-
- 	interface = &intf->cur_altsetting->desc;
--	endpoint = &intf->cur_altsetting->endpoint[0].desc;
- 	/* Start checking for two bulk endpoints or ... FIXME: This is a future
- 	 * enhancement...*/
- 	bvd_dbg("usb_ipc_probe: Number of Endpoints:%d",
-@@ -638,30 +637,26 @@
-
- 	ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0;
-
--	bvd_dbg("usb_ipc_probe: endpoint[0] is:%x",
--		(&endpoint[0])->bEndpointAddress);
--	bvd_dbg("usb_ipc_probe: endpoint[1] is:%x ",
--		(&endpoint[1])->bEndpointAddress);
--
- 	while (ep_cnt < interface->bNumEndpoints) {
--
--		if (!have_bulk_in_mux && IS_EP_BULK_IN(endpoint[ep_cnt])) {
--			bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is:%x ",
--				(&endpoint[ep_cnt])->bEndpointAddress);
--			have_bulk_in_mux =
--					(&endpoint[ep_cnt])->bEndpointAddress;
--			readsize = (&endpoint[ep_cnt])->wMaxPacketSize;
-+		endpoint = &intf->cur_altsetting->endpoint[ep_cnt].desc;
-+		bvd_dbg("usb_ipc_probe: endpoint[%i] is: %x", ep_cnt,
-+			endpoint->bEndpointAddress);
-+
-+		if (!have_bulk_in_mux && IS_EP_BULK_IN(*endpoint)) {
-+			bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is: %x ",
-+				endpoint->bEndpointAddress);
-+			have_bulk_in_mux =  endpoint->bEndpointAddress;
-+			readsize = endpoint->wMaxPacketSize;
- 			bvd_dbg("usb_ipc_probe: readsize=%d", readsize);
- 			ep_cnt++;
- 			continue;
- 		}
-
--		if (!have_bulk_out_mux && IS_EP_BULK_OUT(endpoint[ep_cnt])) {
--			bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is:%x ",
--				(&endpoint[ep_cnt])->bEndpointAddress);
--			have_bulk_out_mux =
--				(&endpoint[ep_cnt])->bEndpointAddress;
--			writesize = (&endpoint[ep_cnt])->wMaxPacketSize;
-+		if (!have_bulk_out_mux && IS_EP_BULK_OUT(*endpoint)) {
-+			bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is: %x ",
-+				endpoint->bEndpointAddress);
-+			have_bulk_out_mux = endpoint->bEndpointAddress;
-+			writesize = endpoint->wMaxPacketSize;
- 			bvd_dbg("usb_ipc_probe: writesize=%d", writesize);
- 			ep_cnt++;
- 			continue;
-@@ -718,21 +713,27 @@
- 	bvd_ipc->bh_bp.func = usbipc_bh_bp_func;
- 	bvd_ipc->bh_bp.data = (unsigned long) bvd_ipc;
-
-+	bvd_dbg("after assignements");
- 	/*Build a write urb*/
-+	usb_init_urb(&bvd_ipc->writeurb_mux);
- 	usb_fill_bulk_urb(&bvd_ipc->writeurb_mux, usbdev,
- 			  usb_sndbulkpipe(bvd_ipc->ipc_dev,
- 			  		  bvd_ipc->bulk_out_ep_mux),
- 			  bvd_ipc->obuf, writesize, usb_ipc_write_bulk,
- 			  bvd_ipc);
- 	//bvd_ipc->writeurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
-+	bvd_dbg("after write urb");
-
- 	/*Build a read urb and send a IN token first time*/
-+	usb_init_urb(&bvd_ipc->readurb_mux);
- 	usb_fill_bulk_urb(&bvd_ipc->readurb_mux, usbdev,
- 			  usb_rcvbulkpipe(usbdev, bvd_ipc->bulk_in_ep_mux),
- 			  bvd_ipc->ibuf, readsize, usb_ipc_read_bulk, bvd_ipc);
- 	//bvd_ipc->readurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
-+	bvd_dbg("after read urb");
-
--	usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc);
-+	//usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc);
-+	bvd_dbg("after claim interface");
- 	//usb_driver_claim_interface(&usb_ipc_driver, &ipccfg->interface[1], bvd_ipc);
-
-         // a2590c: dsplog is not supported by this driver
-@@ -740,6 +741,8 @@
- 	//				   &ipccfg->interface[2], bvd_ipc);
- 	/*send a IN token first time*/
- 	bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
-+	bvd_dbg("after assignement");
-+
- 	if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
- 		printk("usb_ipc_prob: usb_submit_urb(read mux bulk) failed!\n");
-
-@@ -750,7 +753,7 @@
- 		tasklet_schedule(&bvd_ipc->bh);
- 	}
-
--	printk("usb_ipc_probe: completed probe!");
-+	printk("usb_ipc_probe: completed probe!\n");
- 	usb_set_intfdata(intf, &bvd_ipc);
- 	return 0;
- }
-@@ -760,21 +763,23 @@
- 	//struct usb_device *usbdev = interface_to_usbdev(intf);
- 	struct ipc_usb_data *bvd_ipc_disconnect = usb_get_intfdata(intf);
-
--	printk("usb_ipc_disconnect:*** \n");
-
-+	printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect);
-+
-+	//FIXME: Memory leak?
- 	if ((UHCRHPS3 & 0x4) == 0)
--		usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
-+	//	usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
-
--	usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
-+	//usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
-
- 	bvd_ipc_disconnect->ipc_flag = IPC_USB_PROBE_NOT_READY;
- 	kfree(bvd_ipc_disconnect->ibuf);
- 	kfree(bvd_ipc_disconnect->obuf);
-
--	usb_driver_release_interface(&usb_ipc_driver,
--			bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]);
--        usb_driver_release_interface(&usb_ipc_driver,
--			bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]);
-+	//usb_driver_release_interface(&usb_ipc_driver,
-+	//		bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]);
-+        //usb_driver_release_interface(&usb_ipc_driver,
-+	//		bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]);
-
- 	//a2590c: dsplog interface is not supported by this driver
- 	//usb_driver_release_interface(&usb_ipc_driver, &bvd_ipc_disconnect->ipc_dev->actconfig->interface[2]);
-@@ -803,13 +808,6 @@
- 	int result;
-
- 	bvd_dbg("init usb_ipc");
--	/* register driver at the USB subsystem */
--	result = usb_register(&usb_ipc_driver);
--	if (result < 0) {
--		err ("usb ipc driver could not be registered");
--		return result;
--	}
--
- 	/*init the related mux interface*/
- 	if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) {
- 		err("usb_ipc_init: Out of memory.");
-@@ -836,6 +834,14 @@
- 	usb_for_mux_driver = &ipcusb_tty_driver;
- 	usb_for_mux_tty = &ipcusb_tty;
-
-+	/* register driver at the USB subsystem */
-+	// this was called before bvd_ipc was allocated
-+	result = usb_register(&usb_ipc_driver);
-+	if (result < 0) {
-+		err ("usb ipc driver could not be registered");
-+		return result;
-+	}
-+
- 	/* init timers for ipcusb read process and usb suspend */
- 	init_timer(&ipcusb_timer);
- 	ipcusb_timer.function = ipcusb_timeout;
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-ifdef-ezx-features.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-ifdef-ezx-features.patch
deleted file mode 100755
index e7935a2598..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-ifdef-ezx-features.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c	2007-04-24 16:31:51.000000000 +0200
-+++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c	2007-04-24 16:34:57.000000000 +0200
-@@ -35,10 +35,14 @@
- #include <linux/list.h>
- #include <linux/errno.h>
- #include <asm/uaccess.h>
-+
-+#ifdef CONFIG_PXA_EZX
- #include <asm/hardware.h>
- #include <asm/arch/hardware.h>
- #include <asm/arch-pxa/pxa-regs.h>
- #include <asm/arch-pxa/ezx.h>
-+#endif
-+
- #include <linux/slab.h>
- #include <linux/miscdevice.h>
- #include <linux/init.h>
-@@ -341,8 +345,10 @@
- 
- static void wakeup_timeout(unsigned long data)
- {
-+#ifdef CONFIG_PXA_EZX
- 	GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
- 	bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!");
-+#endif
- }
- 
- static void suspend_timeout(unsigned long data)
-@@ -353,10 +359,12 @@
- 		bvd_dbg("suspend_timeout: add the suspend timer again");
- 	} else {
- 		unlink_urbs(&bvd_ipc->readurb_mux);
-+#ifdef CONFIG_PXA_EZX
- 		UHCRHPS3 = 0x4;
- 		mdelay(40);
- 		bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x",
- 			UHCRHPS3);
-+#endif
- 	}
- }
- 
-@@ -404,6 +412,7 @@
- 		bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num;
- 		bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! ");
- 
-+#ifdef CONFIG_PXA_EZX
- 		if ((UHCRHPS3 & 0x4) == 0x4) {
- 			static int ret;
- 			int time = 0;
-@@ -442,6 +451,7 @@
- 					"failed! status=%d\n", ret);
- 			bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
- 		}
-+#endif
- 
- 		sumbit_times++;
- 		bvd_ipc->write_finished_flag = 0;
-@@ -464,12 +474,16 @@
- 
- static void usbipc_bh_bp_func(unsigned long param)
- {
-+#ifdef CONFIG_PXA_EZX
- 	if ((UHCRHPS3 & 0x4) == 0x4) {
- 		UHCRHPS3 = 0x8;
-+#endif
- 		mdelay(40);
-+#ifdef CONFIG_PXA_EZX
- 		bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! "
- 			"UHCRHPS3=0x%x", UHCRHPS3);
- 	}
-+#endif
- 	if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
- 		//get_halted_bit();
- 
-@@ -734,7 +748,9 @@
- 	printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect);
- 
- 	//FIXME: Memory leak?
-+#ifdef CONFIG_PXA_EZX
- 	if ((UHCRHPS3 & 0x4) == 0)
-+#endif
- 	//	usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
- 
- 	//usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-linux-2.6.21-fix.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-linux-2.6.21-fix.patch
deleted file mode 100755
index 8d5299e3bd..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-linux-2.6.21-fix.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-Index: linux-2.6.21/drivers/char/ts0710.h
-===================================================================
---- linux-2.6.21.orig/drivers/char/ts0710.h	2007-04-27 20:35:44.000000000 -0300
-+++ linux-2.6.21/drivers/char/ts0710.h	2007-04-27 20:36:03.000000000 -0300
-@@ -45,7 +45,6 @@
-  *  11/18/2002  Modified
-  */
- 
--#include <linux/config.h>
- #include <linux/module.h>
- 
- #include <linux/errno.h>
-@@ -58,7 +57,6 @@
- #include <linux/major.h>
- #include <linux/mm.h>
- #include <linux/init.h>
--#include <linux/devfs_fs_kernel.h>
- 
- #include <asm/uaccess.h>
- #include <asm/system.h>
-Index: linux-2.6.21/drivers/char/ts0710_mux.c
-===================================================================
---- linux-2.6.21.orig/drivers/char/ts0710_mux.c	2007-04-27 20:35:44.000000000 -0300
-+++ linux-2.6.21/drivers/char/ts0710_mux.c	2007-04-27 20:36:03.000000000 -0300
-@@ -46,7 +46,6 @@
-  *  11/18/2002  Second version
-  *  04/21/2004  Add GPRS PROC
-  */
--#include <linux/config.h>
- #include <linux/module.h>
- #include <linux/types.h>
- 
-@@ -70,15 +69,12 @@
- #include <linux/mm.h>
- #include <linux/slab.h>
- #include <linux/init.h>
--#include <linux/devfs_fs_kernel.h>
--//#include <syslog.h>
- 
- #include <asm/uaccess.h>
- #include <asm/system.h>
- #include <asm/bitops.h>
- 
- #ifdef USB_FOR_MUX
--//#include <linux/usb.h>
- #include "ts0710_mux_usb.h"
- #endif
- 
-@@ -268,8 +264,8 @@
- static struct work_struct post_recv_tqueue;
- 
- static struct tty_struct *mux_table[NR_MUXS];
--static struct termios *mux_termios[NR_MUXS];
--static struct termios *mux_termios_locked[NR_MUXS];
-+static struct ktermios *mux_termios[NR_MUXS];
-+static struct ktermios *mux_termios_locked[NR_MUXS];
- static volatile short int mux_tty[NR_MUXS];
- 
- #ifdef min
-@@ -1894,11 +1890,7 @@
- 				if (test_bit(TTY_THROTTLED, &tty->flags)) {
- 					queue_data = 1;
- 				} else {
--					if (test_bit
--					    (TTY_DONT_FLIP, &tty->flags)) {
--						queue_data = 1;
--						post_recv = 1;
--					} else if (recv_info->total) {
-+					if (recv_info->total) {
- 						queue_data = 1;
- 						post_recv = 1;
- 					} else if (recv_room < uih_len) {
-@@ -3149,10 +3141,10 @@
- 
- /*For BP UART problem End*/
- 
--static void receive_worker(void *private_)
-+static void receive_worker(struct work_struct *work)
- {
- 	struct tty_struct *tty = COMM_FOR_MUX_TTY;
--	int i, count, tbuf_free, tbuf_read;
-+	int count, tbuf_free, tbuf_read;
- 	static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
- 	static unsigned char *tbuf_ptr = &tbuf[0];
- 	static unsigned char *start_flag = 0;
-@@ -3168,7 +3160,7 @@
- 	__u32 uih_len;
- 	/*For BP UART problem End */
- 
--	UNUSED_PARAM(private_);
-+	UNUSED_PARAM(work);
- 
-   	if (!tty)
-   		return;
-@@ -3440,7 +3432,7 @@
- 	clear_bit(RECV_RUNNING, &mux_recv_flags);
- }
- 
--static void post_recv_worker(void *private_)
-+static void post_recv_worker(struct work_struct *work)
- {
- 	ts0710_con *ts0710 = &ts0710_connection;
- 	int tty_idx;
-@@ -3453,7 +3445,7 @@
- 	mux_recv_packet *recv_packet, *recv_packet2;
- 	__u8 j;
- 
--	UNUSED_PARAM(private_);
-+	UNUSED_PARAM(work);
- 
- 	if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
- 		schedule_work(&post_recv_tqueue);
-@@ -3499,10 +3491,6 @@
- 		if (test_bit(TTY_THROTTLED, &tty->flags)) {
- 			add_post_recv_queue(&post_recv_q, recv_info);
- 			continue;
--		} else if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
--			post_recv = 1;
--			add_post_recv_queue(&post_recv_q, recv_info);
--			continue;
- 		}
- 
- 		flow_control = 0;
-@@ -3635,7 +3623,7 @@
- 	}
- }
- 
--static void send_worker(void *private_)
-+static void send_worker(struct work_struct *work)
- {
- 	ts0710_con *ts0710 = &ts0710_connection;
- 	__u8 j;
-@@ -3644,7 +3632,7 @@
- 	struct tty_struct *tty;
- 	__u8 dlci;
- 
--	UNUSED_PARAM(private_);
-+	UNUSED_PARAM(work);
- 
- 	TS0710_DEBUG("Enter into send_worker");
- 
-@@ -3819,7 +3807,8 @@
- 	gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes =
- 	    get_count(TS0710MUX_GPRS2_SEND_COUNT_IDX);
- 
--	copy_to_user(buf, gprsData, bufLen);
-+	if(copy_to_user(buf, gprsData, bufLen))
-+		return -EFAULT;
- 
- 	return bufLen;
- }
-@@ -3836,7 +3825,8 @@
- 
- 	memset(gprsData, 0, bufLen);
- 
--	copy_from_user(gprsData, buf, bufLen);
-+	if(copy_from_user(gprsData, buf, bufLen))
-+		return -EFAULT;
- 
- 	set_count(TS0710MUX_GPRS1_RECV_COUNT_IDX, gprsData[0].recvBytes);
- 	set_count(TS0710MUX_GPRS1_SEND_COUNT_IDX, gprsData[0].sentBytes);
-@@ -3893,9 +3883,9 @@
- 	}
- 	post_recv_count_flag = 0;
- 
--	INIT_WORK(&send_tqueue, send_worker, NULL);
--	INIT_WORK(&receive_tqueue, receive_worker, NULL);
--	INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL);
-+	INIT_WORK(&send_tqueue, send_worker);
-+	INIT_WORK(&receive_tqueue, receive_worker);
-+	INIT_WORK(&post_recv_tqueue, post_recv_worker);
- 
- 	mux_driver = alloc_tty_driver(NR_MUXS);
- 	if (!mux_driver)
-@@ -3904,12 +3894,11 @@
- 	mux_driver->owner = THIS_MODULE;
- 	mux_driver->driver_name = "ts0710mux";
- 	mux_driver->name = "mux";
--	mux_driver->devfs_name = "mux";
- 	mux_driver->major = TS0710MUX_MAJOR;
- 	mux_driver->minor_start = TS0710MUX_MINOR_START;
- 	mux_driver->type = TTY_DRIVER_TYPE_SERIAL;
- 	mux_driver->subtype = SERIAL_TYPE_NORMAL;
--	mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
-+	mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- 
- 	mux_driver->init_termios = tty_std_termios;
- 	mux_driver->init_termios.c_iflag = 0;
-@@ -3917,10 +3906,10 @@
- 	mux_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
- 	mux_driver->init_termios.c_lflag = 0;
- 
--//	mux_driver.ttys = mux_table;
-+	//mux_driver.ttys = mux_table;
- 	mux_driver->termios = mux_termios;
- 	mux_driver->termios_locked = mux_termios_locked;
--//  mux_driver.driver_state = mux_state;
-+	//mux_driver.driver_state = mux_state;
- 	mux_driver->other = NULL;
- 
- 	mux_driver->open = mux_open;
-Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c	2007-04-27 20:35:44.000000000 -0300
-+++ linux-2.6.21/drivers/char/ts0710_mux_usb.c	2007-04-27 22:34:31.000000000 -0300
-@@ -188,7 +188,8 @@
- 	buf_list_t *inbuf;
- 	int count = urb->actual_length;
- 
--	inbuf = kmalloc(sizeof(buf_list_t), GFP_KERNEL);
-+	// we are called from interrupt context.
-+	inbuf = kmalloc(sizeof(buf_list_t), GFP_ATOMIC);
- 	if (!inbuf) {
- 		printk("append_to_inbuf_list: (%d) out of memory!\n",
- 			sizeof(buf_list_t));
-@@ -196,7 +197,7 @@
- 	}
- 
- 	inbuf->size = count;
--	inbuf->body = kmalloc(sizeof(char)*count, GFP_KERNEL);
-+	inbuf->body = kmalloc(sizeof(char)*count, GFP_ATOMIC);
- 	if (!inbuf->body) {
- 		kfree(inbuf);
- 		printk("append_to_inbuf_list: (%d) out of memory!\n",
-@@ -222,7 +223,7 @@
- 		inbuf = list_entry(ptr, buf_list_t, list);
- 		src_count = inbuf->size;
- 		if (dst_count >= src_count) {
--			memcpy(buf, inbuf->body, src_count);
-+			memcpy((unsigned char *)buf, inbuf->body, src_count);
- 			ret = src_count;
- 			list_del(ptr);
- 			kfree(inbuf->body);
-@@ -282,9 +283,8 @@
- 	spin_unlock(&bvd_ipc->in_buf_lock);
- }
- 
--static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs)
-+static void usb_ipc_read_bulk(struct urb *urb)
- {
--	buf_list_t *inbuf;
- 	int count = urb->actual_length;
- 	struct tty_struct *tty = &ipcusb_tty;
- 
-@@ -319,7 +319,7 @@
- 	bvd_dbg("usb_ipc_read_bulk: completed!!!");
- }
- 
--static void usb_ipc_write_bulk(struct urb *urb, struct pt_regs *regs)
-+static void usb_ipc_write_bulk(struct urb *urb)
- {
- 	callback_times++;
- 	bvd_ipc->write_finished_flag = 1;
-@@ -437,7 +437,7 @@
- 			/*send IN token*/
- 			bvd_ipc->readurb_mux.actual_length = 0;
- 			bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
--			if (ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
-+			if ((ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)))
- 				printk("ipcusb_xmit_data: usb_submit_urb(read mux bulk)"
- 					"failed! status=%d\n", ret);
- 			bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
-@@ -447,7 +447,7 @@
- 		bvd_ipc->write_finished_flag = 0;
- 		//printk("%s: clear write_finished_flag:%d\n", __FUNCTION__, bvd_ipc->write_finished_flag);
- 		bvd_ipc->writeurb_mux.dev = bvd_ipc->ipc_dev;
--		if (result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC))
-+		if ((result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC)))
- 			warn("ipcusb_xmit_data: funky result! result=%d\n", result);
- 
- 		bvd_dbg("ipcusb_xmit_data: usb_submit_urb finished! result:%d", result);
-@@ -498,7 +498,7 @@
- 		return 0;
- 
- 	if (*ipcusb_ap_to_bp != NULL)
--		(*ipcusb_ap_to_bp)(buf, count);
-+		(*ipcusb_ap_to_bp)((unsigned char *)buf, count);
- 
- 	bvd_ipc->suspend_flag = 1;
- 
-@@ -602,6 +602,7 @@
- 	}
- 
- 	ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0;
-+	readsize = writesize = 0;
- 
- 	while (ep_cnt < interface->bNumEndpoints) {
- 		endpoint = &intf->cur_altsetting->endpoint[ep_cnt].desc;
-@@ -792,6 +793,8 @@
- 	bvd_ipc->ipc_dev = NULL;
- 	bvd_ipc->xmit.head = bvd_ipc->xmit.tail = 0;
- 	bvd_ipc->write_flag = IPC_USB_WRITE_INIT;
-+	spin_lock_init(&bvd_ipc->lock);
-+	spin_lock_init(&bvd_ipc->in_buf_lock);
- 
- 	ipcusb_tty_driver.write = usb_ipc_write;
- 	ipcusb_tty_driver.chars_in_buffer = usb_ipc_chars_in_buffer;
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-remove-flipbuffers.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-remove-flipbuffers.patch
deleted file mode 100755
index d4781f9fc7..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-remove-flipbuffers.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c	2007-01-17 00:52:25.000000000 +0100
-+++ linux-2.6.16/drivers/char/ts0710_mux_usb.c	2007-01-17 00:52:26.000000000 +0100
-@@ -133,6 +133,7 @@
-
- 	struct circ_buf		xmit;		/* write cric bufffer */
-   	struct list_head 	in_buf_list;
-+	spinlock_t		in_buf_lock;
- 	char 			bulk_in_ep_mux,
- 				bulk_out_ep_mux,
- 				bulk_in_ep_dsplog;
-@@ -204,9 +205,39 @@
- 		return;
- 	}
- 	memcpy(inbuf->body, (unsigned char*)urb->transfer_buffer, count);
-+	spin_lock(&bvd_ipc->in_buf_lock);
- 	list_add_tail(&inbuf->list, &bvd_ipc->in_buf_list);
-+	spin_unlock(&bvd_ipc->in_buf_lock);
- }
-
-+int get_from_inbuf_list(const unsigned char *buf, int dst_count)
-+{
-+	int ret = 0;
-+	spin_lock(&bvd_ipc->in_buf_lock);
-+	if (!(list_empty(&bvd_ipc->in_buf_list))) {
-+		int src_count;
-+		buf_list_t *inbuf;
-+		struct list_head *ptr;
-+
-+		ptr = bvd_ipc->in_buf_list.next;
-+		inbuf = list_entry(ptr, buf_list_t, list);
-+		src_count = inbuf->size;
-+		if (dst_count >= src_count) {
-+			memcpy(buf, inbuf->body, src_count);
-+			ret = src_count;
-+			list_del(ptr);
-+			kfree(inbuf->body);
-+			kfree(inbuf);
-+		} else {
-+			bvd_dbg("get_from_inbuf_list: not enough space in destination buffer");
-+		}
-+	}
-+	spin_unlock(&bvd_ipc->in_buf_lock);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(get_from_inbuf_list);
-+
- static void ipcusb_timeout(unsigned long data)
- {
- 	struct tty_struct *tty = &ipcusb_tty;
-@@ -214,13 +245,14 @@
-
- 	bvd_dbg("ipcusb_timeout***");
-
-+	spin_lock(&bvd_ipc->in_buf_lock);
- 	while (!(list_empty(&bvd_ipc->in_buf_list))) {
- 		int count;
- 		buf_list_t *inbuf;
- 		struct list_head *ptr = NULL;
-
- 		ptr = bvd_ipc->in_buf_list.next;
--		inbuf = list_entry (ptr, buf_list_t, list);
-+		inbuf = list_entry(ptr, buf_list_t, list);
- 		count = inbuf->size;
- 		if (tty_insert_flip_string(tty, inbuf->body, count) >= count) {
- 			list_del(ptr);
-@@ -232,10 +264,12 @@
- 			break;
- 		}
- 	}
-+	spin_unlock(&bvd_ipc->in_buf_lock);
-
- 	if (usb_mux_dispatcher)
- 		usb_mux_dispatcher(tty);	/**call Liu changhui's func.**/
-
-+	spin_lock(&bvd_ipc->in_buf_lock);
- 	if (list_empty(&bvd_ipc->in_buf_list)) {
- 		urb->actual_length = 0;
- 		urb->dev = bvd_ipc->ipc_dev;
-@@ -246,6 +280,7 @@
- 		ipcusb_timer.data = (unsigned long)urb;
- 		mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
- 	}
-+	spin_unlock(&bvd_ipc->in_buf_lock);
- }
-
- static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs)
-@@ -266,69 +301,11 @@
- 	if (count > 0 && ((*ipcusb_bp_to_ap) != NULL))
- 		(*ipcusb_bp_to_ap)(urb->transfer_buffer, urb->actual_length);
-
-- 	if (!(list_empty(&bvd_ipc->in_buf_list))) {
--		int need_mux = 0;
--
-- 		bvd_dbg("usb_ipc_read_bulk: some urbs in_buf_list");
--		if (count > 0) {
--			bvd_ipc->suspend_flag = 1;
--			append_to_inbuf_list(urb); /* append the current received urb */
--#if 0
--			if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
--			{
--				last_jiff = jiffies;
--				queue_apm_event(KRNL_ICL, NULL);
--			}
--#endif
--		}
--
--		while (!(list_empty(&bvd_ipc->in_buf_list))) {
--			struct list_head* ptr = NULL;
--			ptr = bvd_ipc->in_buf_list.next;
--			inbuf = list_entry(ptr, buf_list_t, list);
--			count = inbuf->size;
--			need_mux = 1;
--
--			tty_insert_flip_string(tty, inbuf->body, count);
--
--			list_del(ptr);
--			kfree(inbuf->body);
--			inbuf->body = NULL;
--			kfree(inbuf);
--		}
--
--		if (usb_mux_dispatcher && need_mux)
--			usb_mux_dispatcher(tty); /* call Liu changhui's func. */
--
--		if (list_empty(&bvd_ipc->in_buf_list)) {
--			urb->actual_length = 0;
--			urb->dev = bvd_ipc->ipc_dev;
--			if (usb_submit_urb(urb, GFP_ATOMIC))
--				bvd_dbg("usb_ipc_read_bulk: "
--					"failed resubmitting read urb");
--			bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
--		} else {
--			ipcusb_timer.data = (unsigned long)urb;
--			mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
--		}
--	} else if (count > 0) {
-- 		bvd_dbg("usb_ipc_read_bulk: no urbs in_buf_list");
-+ 	if (count > 0) {
-+ 		bvd_dbg("usb_ipc_read_bulk: inserting buffer into in_buf_list");
- 		bvd_ipc->suspend_flag = 1;
-
--		if (tty_insert_flip_string(tty, urb->transfer_buffer,
--					   count) < count) {
--			bvd_ipc->suspend_flag = 1;
--			append_to_inbuf_list(urb);
--			ipcusb_timer.data = (unsigned long)urb;
--			mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
--#if 0
--			if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
--			{
--				last_jiff = jiffies;
--				queue_apm_event(KRNL_ICL, NULL);
--			}
--#endif
--		}
-+		append_to_inbuf_list(urb);
-
- 		if (usb_mux_dispatcher)
- 			usb_mux_dispatcher(tty); /* call Liu changhui's func. */
-@@ -337,13 +314,6 @@
- 		urb->dev = bvd_ipc->ipc_dev;
- 		if (usb_submit_urb(urb, GFP_ATOMIC))
- 			bvd_dbg("failed resubmitting read urb");
--#if 0
--		if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
--		{
--			last_jiff = jiffies;
--			queue_apm_event(KRNL_ICL, NULL);
--		}
--#endif
- 		bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
- 	}
-
-@@ -705,7 +675,8 @@
- 	bvd_ipc->bulk_out_ep_mux= have_bulk_out_mux;
- 	bvd_ipc->ipc_dev = usbdev;
- 	bvd_ipc->writesize = writesize;
--	INIT_LIST_HEAD (&bvd_ipc->in_buf_list);
-+	INIT_LIST_HEAD(&bvd_ipc->in_buf_list);
-+	bvd_ipc->in_buf_lock = SPIN_LOCK_UNLOCKED;
-
- 	bvd_ipc->bh.func = usbipc_bh_func;
- 	bvd_ipc->bh.data = (unsigned long) bvd_ipc;
-Index: linux-2.6.16/drivers/char/ts0710_mux.c
-===================================================================
---- linux-2.6.16.orig/drivers/char/ts0710_mux.c	2007-01-17 00:52:23.000000000 +0100
-+++ linux-2.6.16/drivers/char/ts0710_mux.c	2007-01-17 00:52:26.000000000 +0100
-@@ -3149,7 +3149,7 @@
- static void receive_worker(void *private_)
- {
- 	struct tty_struct *tty = COMM_FOR_MUX_TTY;
--	int i, count;
-+	int i, count, tbuf_free, tbuf_read;
- 	static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
- 	static unsigned char *tbuf_ptr = &tbuf[0];
- 	static unsigned char *start_flag = 0;
-@@ -3167,29 +3167,39 @@
-
- 	UNUSED_PARAM(private_);
-
--	if (!tty)
--		return;
-+  	if (!tty)
-+  		return;
-+
-+ 	while (1) {
-+ 		tbuf_free = TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf);
-+ 		TS0710_PRINTK("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free);
-+ 		tbuf_read = get_from_inbuf_list(tbuf_ptr, tbuf_free);
-+ 		if (tbuf_read == 0) {
-+ 			break;
-+ 		} else {
-+ 			TS0710_PRINTK("Read %i bytes.\n", tbuf_read);
-+ 		};
-+ 		tbuf_ptr += tbuf_read;
-+ 	};
-+
-+ 	count = (tbuf_ptr - tbuf);
-+
-+ 	// Should be impossible?
-+ 	//if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
-+ 	//	TS0710_PRINTK
-+ 	//	    ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
-+ 	//	count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
-+ 	//}
-
- #ifdef USB_FOR_MUX
--	TS0710_DEBUG("Receive following bytes from IPC-USB");
-+ 	TS0710_DEBUG("Received following bytes from IPC-USB");
- #else
--	TS0710_DEBUG("Receive following bytes from UART");
-+ 	TS0710_DEBUG("Received following bytes from UART");
- #endif
--
--	TS0710_DEBUGHEX(cp, count);
--
--	if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
--		TS0710_PRINTK
--		    ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
--		count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
--	}
--
--	count = tty_buffer_request_room(tty, count);
--
--	for (i = 0; i < count; i++)
--		tty_insert_flip_char(tty, tbuf_ptr[i], TTY_NORMAL);
--
--	tbuf_ptr += count;
-+  	TS0710_DEBUGHEX(tbuf, count);
-+
-+ 	//gets updated above
-+ 	//tbuf_ptr += count;
- 	search = &tbuf[0];
-
- 	if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
-Index: linux-2.6.16/drivers/char/ts0710_mux_usb.h
-===================================================================
---- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.h	2007-01-17 00:52:23.000000000 +0100
-+++ linux-2.6.16/drivers/char/ts0710_mux_usb.h	2007-01-17 00:52:26.000000000 +0100
-@@ -27,3 +27,6 @@
- extern struct tty_struct *usb_for_mux_tty;
- extern void (*usb_mux_dispatcher)(struct tty_struct *tty);
- extern void (*usb_mux_sender)(void);
-+
-+extern int get_from_inbuf_list(const unsigned char *buf, int dst_count);
-+
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-remove-get_halted_bit.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-remove-get_halted_bit.patch
deleted file mode 100755
index 0ebe27d03b..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-remove-get_halted_bit.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c	2007-01-17 01:06:21.000000000 +0100
-+++ linux-2.6.16/drivers/char/ts0710_mux_usb.c	2007-01-17 01:06:31.000000000 +0100
-@@ -461,7 +461,7 @@
- 	ipcusb_xmit_data();
- }
-
--extern void get_halted_bit(void);
-+//extern void get_halted_bit(void);
-
- static void usbipc_bh_bp_func(unsigned long param)
- {
-@@ -472,7 +472,7 @@
- 			"UHCRHPS3=0x%x", UHCRHPS3);
- 	}
- 	if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
--		get_halted_bit();
-+		//get_halted_bit();
-
- 		/*send a IN token*/
- 		bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux-remove-usbh_finished_resume.patch b/packages/linux/linux-ezx-2.6.21/patches/mux-remove-usbh_finished_resume.patch
deleted file mode 100755
index c415ded428..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux-remove-usbh_finished_resume.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c	2007-01-17 01:12:23.000000000 +0100
-+++ linux-2.6.16/drivers/char/ts0710_mux_usb.c	2007-01-17 01:12:37.000000000 +0100
-@@ -97,7 +97,6 @@
- static int sumbit_times = 0;
- static int callback_times = 0;
- //static unsigned long last_jiff = 0;
--extern int usbh_finished_resume;
- /*end global values defined*/
-
- MODULE_AUTHOR(DRIVER_AUTHOR);
-@@ -546,9 +545,6 @@
- void usb_send_readurb(void)
- {
- 	//printk("usb_send_readurb: begining!UHCRHPS3=0x%x, usbh_finished_resume=%d\n", UHCRHPS3, usbh_finished_resume);
--
--	if (usbh_finished_resume == 0)
--		return;
-
- 	tasklet_schedule(&bvd_ipc->bh_bp);
- }
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux_cli.patch b/packages/linux/linux-ezx-2.6.21/patches/mux_cli.patch
deleted file mode 100755
index b3974a5996..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux_cli.patch
+++ /dev/null
@@ -1,5396 +0,0 @@
-Index: linux-2.6.21/drivers/char/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/char/Kconfig	2007-05-06 17:07:33.000000000 -0300
-+++ linux-2.6.21/drivers/char/Kconfig	2007-05-06 17:10:53.000000000 -0300
-@@ -1071,5 +1071,18 @@
- 	  /sys/devices/platform/telco_clock, with a number of files for
- 	  controlling the behavior of this hardware.
- 
-+config TS0710_MUX
-+	tristate "GSM TS 07.10 Multiplex driver"
-+	depends on EZX_BP
-+	help
-+	  This implements the GSM 07.10 multiplex.
-+
-+config TS0710_MUX_USB
-+	tristate "Motorola USB support for TS 07.10 Multiplex driver"
-+	depends on TS0710_MUX
-+	help
-+	  This ads support for TS 07.10 over USB, as found in motorola
-+	  Smartphones.
-+
- endmenu
- 
-Index: linux-2.6.21/drivers/char/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/char/Makefile	2007-05-06 17:07:33.000000000 -0300
-+++ linux-2.6.21/drivers/char/Makefile	2007-05-06 17:10:21.000000000 -0300
-@@ -104,6 +104,9 @@
- obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
- obj-$(CONFIG_TCG_TPM)		+= tpm/
- 
-+obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o ts0710_mux_usb.o
-+
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
- 
-Index: linux-2.6.21/drivers/char/ts0710.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/char/ts0710.h	2007-05-06 17:10:21.000000000 -0300
-@@ -0,0 +1,368 @@
-+/*
-+ * File: ts0710.h
-+ *
-+ * Portions derived from rfcomm.c, original header as follows:
-+ *
-+ * Copyright (C) 2000, 2001  Axis Communications AB
-+ *
-+ * Author: Mats Friden <mats.friden@axis.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ * Exceptionally, Axis Communications AB grants discretionary and
-+ * conditional permissions for additional use of the text contained
-+ * in the company's release of the AXIS OpenBT Stack under the
-+ * provisions set forth hereunder.
-+ *
-+ * Provided that, if you use the AXIS OpenBT Stack with other files,
-+ * that do not implement functionality as specified in the Bluetooth
-+ * System specification, to produce an executable, this does not by
-+ * itself cause the resulting executable to be covered by the GNU
-+ * General Public License. Your use of that executable is in no way
-+ * restricted on account of using the AXIS OpenBT Stack code with it.
-+ *
-+ * This exception does not however invalidate any other reasons why
-+ * the executable file might be covered by the provisions of the GNU
-+ * General Public License.
-+ *
-+ */
-+/*
-+ * Copyright (C) 2002  Motorola
-+ *
-+ *  07/28/2002  Initial version based on rfcomm.c
-+ *  11/18/2002  Modified
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/fcntl.h>
-+#include <linux/string.h>
-+#include <linux/major.h>
-+#include <linux/mm.h>
-+#include <linux/init.h>
-+#include <linux/devfs_fs_kernel.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/bitops.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/types.h>
-+
-+#define TS0710_MAX_CHN 14
-+
-+#define SET_PF(ctr) ((ctr) | (1 << 4))
-+#define CLR_PF(ctr) ((ctr) & 0xef)
-+#define GET_PF(ctr) (((ctr) >> 4) & 0x1)
-+
-+#define GET_PN_MSG_FRAME_SIZE(pn) ( ((pn)->frame_sizeh << 8) | ((pn)->frame_sizel))
-+#define SET_PN_MSG_FRAME_SIZE(pn, size) ({ (pn)->frame_sizel = (size) & 0xff; \
-+                                           (pn)->frame_sizeh = (size) >> 8; })
-+
-+#define GET_LONG_LENGTH(a) ( ((a).h_len << 7) | ((a).l_len) )
-+#define SET_LONG_LENGTH(a, length) ({ (a).ea = 0; \
-+                                      (a).l_len = length & 0x7F; \
-+                                      (a).h_len = (length >> 7) & 0xFF; })
-+
-+#define SHORT_CRC_CHECK 3
-+#define LONG_CRC_CHECK 4
-+
-+/* FIXME: Should thsi one be define here? */
-+#define SHORT_PAYLOAD_SIZE 127
-+
-+#define EA 1
-+#define FCS_SIZE 1
-+#define FLAG_SIZE 2
-+
-+#define TS0710_MAX_HDR_SIZE 5
-+#define DEF_TS0710_MTU 256
-+
-+#define TS0710_BASIC_FLAG 0xF9
-+/* the control field */
-+#define SABM 0x2f
-+#define SABM_SIZE 4
-+#define UA 0x63
-+#define UA_SIZE 4
-+#define DM 0x0f
-+#define DISC 0x43
-+#define UIH 0xef
-+
-+/* the type field in a multiplexer command packet */
-+#define TEST 0x8
-+#define FCON 0x28
-+#define FCOFF 0x18
-+#define MSC 0x38
-+#define RPN 0x24
-+#define RLS 0x14
-+#define PN 0x20
-+#define NSC 0x4
-+
-+/* V.24 modem control signals */
-+#define FC 0x2
-+#define RTC 0x4
-+#define RTR 0x8
-+#define IC 0x40
-+#define DV 0x80
-+
-+#define CTRL_CHAN 0		/* The control channel is defined as DLCI 0 */
-+#define MCC_CMD 1		/* Multiplexer command cr */
-+#define MCC_RSP 0		/* Multiplexer response cr */
-+
-+#ifdef __LITTLE_ENDIAN_BITFIELD
-+
-+typedef struct {
-+	__u8 ea:1;
-+	__u8 cr:1;
-+	__u8 d:1;
-+	__u8 server_chn:5;
-+} __attribute__ ((packed)) address_field;
-+
-+typedef struct {
-+	__u8 ea:1;
-+	__u8 len:7;
-+} __attribute__ ((packed)) short_length;
-+
-+typedef struct {
-+	__u8 ea:1;
-+	__u8 l_len:7;
-+	__u8 h_len;
-+} __attribute__ ((packed)) long_length;
-+
-+typedef struct {
-+	address_field addr;
-+	__u8 control;
-+	short_length length;
-+} __attribute__ ((packed)) short_frame_head;
-+
-+typedef struct {
-+	short_frame_head h;
-+	__u8 data[0];
-+} __attribute__ ((packed)) short_frame;
-+
-+typedef struct {
-+	address_field addr;
-+	__u8 control;
-+	long_length length;
-+	__u8 data[0];
-+} __attribute__ ((packed)) long_frame_head;
-+
-+typedef struct {
-+	long_frame_head h;
-+	__u8 data[0];
-+} __attribute__ ((packed)) long_frame;
-+
-+/* Typedefinitions for structures used for the multiplexer commands */
-+typedef struct {
-+	__u8 ea:1;
-+	__u8 cr:1;
-+	__u8 type:6;
-+} __attribute__ ((packed)) mcc_type;
-+
-+typedef struct {
-+	mcc_type type;
-+	short_length length;
-+	__u8 value[0];
-+} __attribute__ ((packed)) mcc_short_frame_head;
-+
-+typedef struct {
-+	mcc_short_frame_head h;
-+	__u8 value[0];
-+} __attribute__ ((packed)) mcc_short_frame;
-+
-+typedef struct {
-+	mcc_type type;
-+	long_length length;
-+	__u8 value[0];
-+} __attribute__ ((packed)) mcc_long_frame_head;
-+
-+typedef struct {
-+	mcc_long_frame_head h;
-+	__u8 value[0];
-+} __attribute__ ((packed)) mcc_long_frame;
-+
-+/* MSC-command */
-+typedef struct {
-+	__u8 ea:1;
-+	__u8 fc:1;
-+	__u8 rtc:1;
-+	__u8 rtr:1;
-+	__u8 reserved:2;
-+	__u8 ic:1;
-+	__u8 dv:1;
-+} __attribute__ ((packed)) v24_sigs;
-+
-+typedef struct {
-+	__u8 ea:1;
-+	__u8 b1:1;
-+	__u8 b2:1;
-+	__u8 b3:1;
-+	__u8 len:4;
-+} __attribute__ ((packed)) brk_sigs;
-+
-+typedef struct {
-+	short_frame_head s_head;
-+	mcc_short_frame_head mcc_s_head;
-+	address_field dlci;
-+	__u8 v24_sigs;
-+	//brk_sigs break_signals;
-+	__u8 fcs;
-+} __attribute__ ((packed)) msc_msg;
-+
-+#if 0
-+/* conflict with termios.h */
-+/* RPN command */
-+#define B2400 0
-+#define B4800 1
-+#define B7200 2
-+#define B9600 3
-+#define B19200 4
-+#define B38400 5
-+#define B57600 6
-+#define B115200 7
-+#define D230400 8
-+#endif
-+
-+/*
-+typedef struct{
-+  __u8 bit_rate:1;
-+  __u8 data_bits:1;
-+  __u8 stop_bit:1;
-+  __u8 parity:1;
-+  __u8 parity_type:1;
-+  __u8 xon_u8:1;
-+  __u8 xoff_u8:1;
-+  __u8 res1:1;
-+  __u8 xon_input:1;
-+  __u8 xon_output:1;
-+  __u8 rtr_input:1;
-+  __u8 rtr_output:1;
-+  __u8 rtc_input:1;
-+  __u8 rtc_output:1;
-+  __u8 res2:2;
-+} __attribute__((packed)) parameter_mask;
-+
-+typedef struct{
-+  __u8 bit_rate;
-+  __u8 data_bits:2;
-+  __u8 stop_bit:1;
-+  __u8 parity:1;
-+  __u8 parity_type:2;
-+  __u8 res1:2;
-+  __u8 xon_input:1;
-+  __u8 xon_output:1;
-+  __u8 rtr_input:1;
-+  __u8 rtr_output:1;
-+  __u8 rtc_input:1;
-+  __u8 rtc_output:1;
-+  __u8 res2:2;
-+  __u8 xon_u8;
-+  __u8 xoff_u8;
-+  parameter_mask pm;
-+} __attribute__((packed)) rpn_values;
-+
-+typedef struct{
-+  short_frame_head s_head;
-+  mcc_short_frame_head mcc_s_head;
-+  address_field dlci;
-+  rpn_values rpn_val;
-+  __u8 fcs;
-+} __attribute__((packed)) rpn_msg;
-+*/
-+
-+/* RLS-command */
-+/*
-+typedef struct{
-+  short_frame_head s_head;
-+  mcc_short_frame_head mcc_s_head;
-+  address_field dlci;
-+  __u8 error:4;
-+  __u8 res:4;
-+  __u8 fcs;
-+} __attribute__((packed)) rls_msg;
-+*/
-+
-+/* PN-command */
-+typedef struct {
-+	short_frame_head s_head;
-+	mcc_short_frame_head mcc_s_head;
-+	__u8 dlci:6;
-+	__u8 res1:2;
-+	__u8 frame_type:4;
-+	__u8 credit_flow:4;
-+	__u8 prior:6;
-+	__u8 res2:2;
-+	__u8 ack_timer;
-+	__u8 frame_sizel;
-+	__u8 frame_sizeh;
-+	__u8 max_nbrof_retrans;
-+	__u8 credits;
-+	__u8 fcs;
-+} __attribute__ ((packed)) pn_msg;
-+
-+/* NSC-command */
-+typedef struct {
-+	short_frame_head s_head;
-+	mcc_short_frame_head mcc_s_head;
-+	mcc_type command_type;
-+	__u8 fcs;
-+} __attribute__ ((packed)) nsc_msg;
-+
-+#else
-+#error Only littel-endianess supported now!
-+#endif
-+
-+enum {
-+	REJECTED = 0,
-+	DISCONNECTED,
-+	CONNECTING,
-+	NEGOTIATING,
-+	CONNECTED,
-+	DISCONNECTING,
-+	FLOW_STOPPED
-+};
-+
-+enum ts0710_events {
-+	CONNECT_IND,
-+	CONNECT_CFM,
-+	DISCONN_CFM
-+};
-+
-+typedef struct {
-+	volatile __u8 state;
-+	volatile __u8 flow_control;
-+	volatile __u8 initiated;
-+	volatile __u8 initiator;
-+	volatile __u16 mtu;
-+	wait_queue_head_t open_wait;
-+	wait_queue_head_t close_wait;
-+} dlci_struct;
-+
-+/* user space interfaces */
-+typedef struct {
-+	volatile __u8 initiator;
-+	volatile __u8 c_dlci;
-+	volatile __u16 mtu;
-+	volatile __u8 be_testing;
-+	volatile __u32 test_errs;
-+	wait_queue_head_t test_wait;
-+
-+	dlci_struct dlci[TS0710_MAX_CHN];
-+} ts0710_con;
-Index: linux-2.6.21/drivers/char/ts0710_mux.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/char/ts0710_mux.c	2007-05-06 17:10:21.000000000 -0300
-@@ -0,0 +1,3966 @@
-+/*
-+ * File: mux_driver.c
-+ *
-+ * Portions derived from rfcomm.c, original header as follows:
-+ *
-+ * Copyright (C) 2000, 2001  Axis Communications AB
-+ *
-+ * Author: Mats Friden <mats.friden@axis.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ * Exceptionally, Axis Communications AB grants discretionary and
-+ * conditional permissions for additional use of the text contained
-+ * in the company's release of the AXIS OpenBT Stack under the
-+ * provisions set forth hereunder.
-+ *
-+ * Provided that, if you use the AXIS OpenBT Stack with other files,
-+ * that do not implement functionality as specified in the Bluetooth
-+ * System specification, to produce an executable, this does not by
-+ * itself cause the resulting executable to be covered by the GNU
-+ * General Public License. Your use of that executable is in no way
-+ * restricted on account of using the AXIS OpenBT Stack code with it.
-+ *
-+ * This exception does not however invalidate any other reasons why
-+ * the executable file might be covered by the provisions of the GNU
-+ * General Public License.
-+ *
-+ */
-+/*
-+ * Copyright (C) 2002-2004  Motorola
-+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
-+ *
-+ *  07/28/2002  Initial version
-+ *  11/18/2002  Second version
-+ *  04/21/2004  Add GPRS PROC
-+ */
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+
-+#define USB_FOR_MUX
-+
-+#ifndef USB_FOR_MUX
-+#include <linux/serial.h>
-+#endif
-+
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/fcntl.h>
-+#include <linux/string.h>
-+#include <linux/major.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/devfs_fs_kernel.h>
-+//#include <syslog.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/bitops.h>
-+
-+#ifdef USB_FOR_MUX
-+//#include <linux/usb.h>
-+#include "ts0710_mux_usb.h"
-+#endif
-+
-+#include "ts0710.h"
-+#include "ts0710_mux.h"
-+
-+#define TS0710MUX_GPRS_SESSION_MAX 2
-+#define TS0710MUX_MAJOR 250
-+#define TS0710MUX_MINOR_START 0
-+#define NR_MUXS 16
-+
-+				  /*#define TS0710MUX_TIME_OUT 30 *//* 300ms  */
-+#define TS0710MUX_TIME_OUT 250	/* 2500ms, for BP UART hardware flow control AP UART  */
-+
-+#define TS0710MUX_IO_DLCI_FC_ON 0x54F2
-+#define TS0710MUX_IO_DLCI_FC_OFF 0x54F3
-+#define TS0710MUX_IO_FC_ON 0x54F4
-+#define TS0710MUX_IO_FC_OFF 0x54F5
-+
-+#define TS0710MUX_MAX_BUF_SIZE 2048
-+
-+#define TS0710MUX_SEND_BUF_OFFSET 10
-+#define TS0710MUX_SEND_BUF_SIZE (DEF_TS0710_MTU + TS0710MUX_SEND_BUF_OFFSET + 34)
-+#define TS0710MUX_RECV_BUF_SIZE TS0710MUX_SEND_BUF_SIZE
-+
-+/*For BP UART problem Begin*/
-+#ifdef TS0710SEQ2
-+#define ACK_SPACE 66		/* 6 * 11(ACK frame size)  */
-+#else
-+#define ACK_SPACE 42		/* 6 * 7(ACK frame size)  */
-+#endif
-+/*For BP UART problem End*/
-+
-+									     /*#define TS0710MUX_SERIAL_BUF_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE)*//* For BP UART problem  */
-+#define TS0710MUX_SERIAL_BUF_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE + ACK_SPACE)	/* For BP UART problem: ACK_SPACE  */
-+
-+#define TS0710MUX_MAX_TOTAL_FRAME_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE + FLAG_SIZE)
-+#define TS0710MUX_MAX_CHARS_IN_BUF 65535
-+#define TS0710MUX_THROTTLE_THRESHOLD DEF_TS0710_MTU
-+
-+#define TEST_PATTERN_SIZE 250
-+
-+#define CMDTAG 0x55
-+#define DATATAG 0xAA
-+
-+#define ACK 0x4F		/*For BP UART problem */
-+
-+/*For BP UART problem Begin*/
-+#ifdef TS0710SEQ2
-+#define FIRST_BP_SEQ_OFFSET 1	/*offset from start flag */
-+#define SECOND_BP_SEQ_OFFSET 2	/*offset from start flag */
-+#define FIRST_AP_SEQ_OFFSET 3	/*offset from start flag */
-+#define SECOND_AP_SEQ_OFFSET 4	/*offset from start flag */
-+#define SLIDE_BP_SEQ_OFFSET 5	/*offset from start flag */
-+#define SEQ_FIELD_SIZE 5
-+#else
-+#define SLIDE_BP_SEQ_OFFSET 1	/*offset from start flag */
-+#define SEQ_FIELD_SIZE 1
-+#endif
-+
-+#define ADDRESS_FIELD_OFFSET (1 + SEQ_FIELD_SIZE)	/*offset from start flag */
-+/*For BP UART problem End*/
-+
-+#ifndef UNUSED_PARAM
-+#define UNUSED_PARAM(v) (void)(v)
-+#endif
-+
-+#define TS0710MUX_GPRS1_DLCI 7
-+#define TS0710MUX_GPRS2_DLCI 8
-+
-+#define TS0710MUX_GPRS1_RECV_COUNT_IDX 0
-+#define TS0710MUX_GPRS1_SEND_COUNT_IDX 1
-+#define TS0710MUX_GPRS2_RECV_COUNT_IDX 2
-+#define TS0710MUX_GPRS2_SEND_COUNT_IDX 3
-+#define TS0710MUX_COUNT_MAX_IDX        3
-+#define TS0710MUX_COUNT_IDX_NUM (TS0710MUX_COUNT_MAX_IDX + 1)
-+
-+static volatile int mux_data_count[TS0710MUX_COUNT_IDX_NUM] = { 0, 0, 0, 0 };
-+static volatile int mux_data_count2[TS0710MUX_COUNT_IDX_NUM] = { 0, 0, 0, 0 };
-+static struct semaphore mux_data_count_mutex[TS0710MUX_COUNT_IDX_NUM];
-+static volatile __u8 post_recv_count_flag = 0;
-+
-+/*PROC file*/
-+struct proc_dir_entry *gprs_proc_file = NULL;
-+ssize_t file_proc_read(struct file *file, char *buf, size_t size,
-+		       loff_t * ppos);
-+ssize_t file_proc_write(struct file *file, const char *buf, size_t count,
-+			loff_t * ppos);
-+struct file_operations file_proc_operations = {
-+      read:file_proc_read,
-+      write:file_proc_write,
-+};
-+typedef struct {
-+	int recvBytes;
-+	int sentBytes;
-+} gprs_bytes;
-+
-+static __u8 tty2dlci[NR_MUXS] =
-+    { 1, 2, 3, 4, 5, 6, 7, 8, 6, 7, 8, 9, 10, 11, 12, 13 };
-+static __u8 iscmdtty[NR_MUXS] =
-+    { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 };
-+typedef struct {
-+	__u8 cmdtty;
-+	__u8 datatty;
-+} dlci_tty;
-+static dlci_tty dlci2tty[] = { {0, 0},	/* DLCI 0 */
-+{0, 0},				/* DLCI 1 */
-+{1, 1},				/* DLCI 2 */
-+{2, 2},				/* DLCI 3 */
-+{3, 3},				/* DLCI 4 */
-+{4, 4},				/* DLCI 5 */
-+{5, 8},				/* DLCI 6 */
-+{6, 9},				/* DLCI 7 */
-+{7, 10},			/* DLCI 8 */
-+{11, 11},			/* DLCI 9 */
-+{12, 12},			/* DLCI 10 */
-+{13, 13},			/* DLCI 11 */
-+{14, 14},			/* DLCI 12 */
-+{15, 15}
-+};				/* DLCI 13 */
-+
-+typedef struct {
-+	volatile __u8 buf[TS0710MUX_SEND_BUF_SIZE];
-+	volatile __u8 *frame;
-+	unsigned long flags;
-+	volatile __u16 length;
-+	volatile __u8 filled;
-+	volatile __u8 dummy;	/* Allignment to 4*n bytes */
-+} mux_send_struct;
-+
-+/* Bit number in flags of mux_send_struct */
-+#define BUF_BUSY 0
-+
-+struct mux_recv_packet_tag {
-+	__u8 *data;
-+	__u32 length;
-+	struct mux_recv_packet_tag *next;
-+};
-+typedef struct mux_recv_packet_tag mux_recv_packet;
-+
-+struct mux_recv_struct_tag {
-+	__u8 data[TS0710MUX_RECV_BUF_SIZE];
-+	__u32 length;
-+	__u32 total;
-+	mux_recv_packet *mux_packet;
-+	struct mux_recv_struct_tag *next;
-+	int no_tty;
-+	volatile __u8 post_unthrottle;
-+};
-+typedef struct mux_recv_struct_tag mux_recv_struct;
-+
-+#define RECV_RUNNING 0
-+static unsigned long mux_recv_flags = 0;
-+
-+static mux_send_struct *mux_send_info[NR_MUXS];
-+static volatile __u8 mux_send_info_flags[NR_MUXS];
-+static volatile __u8 mux_send_info_idx = NR_MUXS;
-+
-+static mux_recv_struct *mux_recv_info[NR_MUXS];
-+static volatile __u8 mux_recv_info_flags[NR_MUXS];
-+static mux_recv_struct *mux_recv_queue = NULL;
-+
-+static struct tty_driver mux_driver;
-+
-+#ifdef USB_FOR_MUX
-+#define COMM_FOR_MUX_DRIVER usb_for_mux_driver
-+#define COMM_FOR_MUX_TTY usb_for_mux_tty
-+#define COMM_MUX_DISPATCHER usb_mux_dispatcher
-+#define COMM_MUX_SENDER usb_mux_sender
-+#else
-+#define COMM_FOR_MUX_DRIVER serial_for_mux_driver
-+#define COMM_FOR_MUX_TTY serial_for_mux_tty
-+#define COMM_MUX_DISPATCHER serial_mux_dispatcher
-+#define COMM_MUX_SENDER serial_mux_sender
-+
-+extern struct list_head *tq_serial_for_mux;
-+#endif
-+
-+extern struct tty_driver *COMM_FOR_MUX_DRIVER;
-+extern struct tty_struct *COMM_FOR_MUX_TTY;
-+extern void (*COMM_MUX_DISPATCHER) (struct tty_struct * tty);
-+extern void (*COMM_MUX_SENDER) (void);
-+
-+static struct work_struct send_tqueue;
-+static struct work_struct receive_tqueue;
-+static struct work_struct post_recv_tqueue;
-+
-+static struct tty_struct *mux_table[NR_MUXS];
-+static struct termios *mux_termios[NR_MUXS];
-+static struct termios *mux_termios_locked[NR_MUXS];
-+static volatile short int mux_tty[NR_MUXS];
-+
-+#ifdef min
-+#undef min
-+#define min(a,b)    ( (a)<(b) ? (a):(b) )
-+#endif
-+
-+static int get_count(__u8 idx);
-+static int set_count(__u8 idx, int count);
-+static int add_count(__u8 idx, int count);
-+
-+static int send_ua(ts0710_con * ts0710, __u8 dlci);
-+static int send_dm(ts0710_con * ts0710, __u8 dlci);
-+static int send_sabm(ts0710_con * ts0710, __u8 dlci);
-+static int send_disc(ts0710_con * ts0710, __u8 dlci);
-+static void queue_uih(mux_send_struct * send_info, __u16 len,
-+		      ts0710_con * ts0710, __u8 dlci);
-+static int send_pn_msg(ts0710_con * ts0710, __u8 prior, __u32 frame_size,
-+		       __u8 credit_flow, __u8 credits, __u8 dlci, __u8 cr);
-+static int send_nsc_msg(ts0710_con * ts0710, mcc_type cmd, __u8 cr);
-+static void set_uih_hdr(short_frame * uih_pkt, __u8 dlci, __u32 len, __u8 cr);
-+
-+static __u32 crc_check(__u8 * data, __u32 length, __u8 check_sum);
-+static __u8 crc_calc(__u8 * data, __u32 length);
-+static void create_crctable(__u8 table[]);
-+
-+static void mux_sched_send(void);
-+
-+static __u8 crctable[256];
-+
-+static ts0710_con ts0710_connection;
-+/*
-+static rpn_values rpn_val;
-+*/
-+
-+static int valid_dlci(__u8 dlci)
-+{
-+	if ((dlci < TS0710_MAX_CHN) && (dlci > 0))
-+		return 1;
-+	else
-+		return 0;
-+}
-+
-+#ifdef TS0710DEBUG
-+
-+#ifdef PRINT_OUTPUT_PRINTK
-+#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX " __FUNCTION__ ": " fmt "\n" , ## arg)
-+#else
-+#include "ezxlog.h"
-+static __u8 strDebug[256];
-+#define TS0710_DEBUG(fmt, arg...) ({ snprintf(strDebug, sizeof(strDebug), "MUX " __FUNCTION__ ": " fmt "\n" , ## arg); \
-+                                     /*printk("%s", strDebug)*/ezxlogk("MX", strDebug, strlen(strDebug)); })
-+#endif				/* End #ifdef PRINT_OUTPUT_PRINTK */
-+
-+#else
-+#define TS0710_DEBUG(fmt...)
-+#endif				/* End #ifdef TS0710DEBUG */
-+
-+#ifdef TS0710LOG
-+static unsigned char g_tbuf[TS0710MUX_MAX_BUF_SIZE];
-+#ifdef PRINT_OUTPUT_PRINTK
-+#define TS0710_LOG(fmt, arg...) printk(fmt, ## arg)
-+#define TS0710_PRINTK(fmt, arg...) printk(fmt, ## arg)
-+#else
-+#include "ezxlog.h"
-+static __u8 strLog[256];
-+#define TS0710_LOG(fmt, arg...) ({ snprintf(strLog, sizeof(strLog), fmt, ## arg); \
-+                                     /*printk("%s", strLog)*/ezxlogk("MX", strLog, strlen(strLog)); })
-+#define TS0710_PRINTK(fmt, arg...) ({ printk(fmt, ## arg); \
-+                                      TS0710_LOG(fmt, ## arg); })
-+#endif				/* End #ifdef PRINT_OUTPUT_PRINTK */
-+
-+#else
-+#define TS0710_LOG(fmt...)
-+#define TS0710_PRINTK(fmt, arg...) printk(fmt, ## arg)
-+#endif				/* End #ifdef TS0710LOG */
-+
-+#ifdef TS0710DEBUG
-+static void TS0710_DEBUGHEX(__u8 * buf, int len)
-+{
-+	static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
-+
-+	int i;
-+	int c;
-+
-+	if (len <= 0) {
-+		return;
-+	}
-+
-+	c = 0;
-+	for (i = 0; (i < len) && (c < (TS0710MUX_MAX_BUF_SIZE - 3)); i++) {
-+		sprintf(&tbuf[c], "%02x ", buf[i]);
-+		c += 3;
-+	}
-+	tbuf[c] = 0;
-+
-+#ifdef PRINT_OUTPUT_PRINTK
-+	TS0710_DEBUG("%s", tbuf);
-+#else
-+	/*printk("%s\n", tbuf) */ ezxlogk("MX", tbuf, c);
-+#endif
-+}
-+static void TS0710_DEBUGSTR(__u8 * buf, int len)
-+{
-+	static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
-+
-+	if (len <= 0) {
-+		return;
-+	}
-+
-+	if (len > (TS0710MUX_MAX_BUF_SIZE - 1)) {
-+		len = (TS0710MUX_MAX_BUF_SIZE - 1);
-+	}
-+
-+	memcpy(tbuf, buf, len);
-+	tbuf[len] = 0;
-+
-+#ifdef PRINT_OUTPUT_PRINTK
-+	/* 0x00 byte in the string pointed by tbuf may truncate the print result */
-+	TS0710_DEBUG("%s", tbuf);
-+#else
-+	/*printk("%s\n", tbuf) */ ezxlogk("MX", tbuf, len);
-+#endif
-+}
-+#else
-+#define TS0710_DEBUGHEX(buf, len)
-+#define TS0710_DEBUGSTR(buf, len)
-+#endif				/* End #ifdef TS0710DEBUG */
-+
-+#ifdef TS0710LOG
-+static void TS0710_LOGSTR_FRAME(__u8 send, __u8 * data, int len)
-+{
-+	short_frame *short_pkt;
-+	long_frame *long_pkt;
-+	__u8 *uih_data_start;
-+	__u32 uih_len;
-+	__u8 dlci;
-+	int pos;
-+
-+	if (len <= 0) {
-+		return;
-+	}
-+
-+	pos = 0;
-+	if (send) {
-+		pos += sprintf(&g_tbuf[pos], "<");
-+		short_pkt = (short_frame *) (data + 1);	/*For BP UART problem */
-+	} else {
-+		/*For BP UART problem */
-+		/*pos += sprintf(&g_tbuf[pos], ">"); */
-+		pos += sprintf(&g_tbuf[pos], ">%d ", *(data + SLIDE_BP_SEQ_OFFSET));	/*For BP UART problem */
-+
-+#ifdef TS0710SEQ2
-+		pos += sprintf(&g_tbuf[pos], "%02x %02x %02x %02x ", *(data + FIRST_BP_SEQ_OFFSET), *(data + SECOND_BP_SEQ_OFFSET), *(data + FIRST_AP_SEQ_OFFSET), *(data + SECOND_AP_SEQ_OFFSET));	/*For BP UART problem */
-+#endif
-+
-+		short_pkt = (short_frame *) (data + ADDRESS_FIELD_OFFSET);	/*For BP UART problem */
-+	}
-+
-+	/*For BP UART problem */
-+	/*short_pkt = (short_frame *)(data + 1); */
-+
-+	dlci = short_pkt->h.addr.server_chn << 1 | short_pkt->h.addr.d;
-+	switch (CLR_PF(short_pkt->h.control)) {
-+	case SABM:
-+		pos += sprintf(&g_tbuf[pos], "C SABM %d ::", dlci);
-+		break;
-+	case UA:
-+		pos += sprintf(&g_tbuf[pos], "C UA %d ::", dlci);
-+		break;
-+	case DM:
-+		pos += sprintf(&g_tbuf[pos], "C DM %d ::", dlci);
-+		break;
-+	case DISC:
-+		pos += sprintf(&g_tbuf[pos], "C DISC %d ::", dlci);
-+		break;
-+
-+		/*For BP UART problem Begin */
-+	case ACK:
-+		pos += sprintf(&g_tbuf[pos], "C ACK %d ", short_pkt->data[0]);
-+
-+#ifdef TS0710SEQ2
-+		pos += sprintf(&g_tbuf[pos], "%02x %02x %02x %02x ", short_pkt->data[1], short_pkt->data[2], short_pkt->data[3], short_pkt->data[4]);	/*For BP UART problem */
-+#endif
-+
-+		pos += sprintf(&g_tbuf[pos], "::");
-+		break;
-+		/*For BP UART problem End */
-+
-+	case UIH:
-+		if (!dlci) {
-+			pos += sprintf(&g_tbuf[pos], "C MCC %d ::", dlci);
-+		} else {
-+
-+			if ((short_pkt->h.length.ea) == 0) {
-+				long_pkt = (long_frame *) short_pkt;
-+				uih_len = GET_LONG_LENGTH(long_pkt->h.length);
-+				uih_data_start = long_pkt->h.data;
-+			} else {
-+				uih_len = short_pkt->h.length.len;
-+				uih_data_start = short_pkt->data;
-+			}
-+			switch (*uih_data_start) {
-+			case CMDTAG:
-+				pos +=
-+				    sprintf(&g_tbuf[pos], "I %d A %d ::", dlci,
-+					    uih_len);
-+				break;
-+			case DATATAG:
-+			default:
-+				pos +=
-+				    sprintf(&g_tbuf[pos], "I %d D %d ::", dlci,
-+					    uih_len);
-+				break;
-+			}
-+
-+		}
-+		break;
-+	default:
-+		pos += sprintf(&g_tbuf[pos], "N!!! %d ::", dlci);
-+		break;
-+	}
-+
-+	if (len > (sizeof(g_tbuf) - pos - 1)) {
-+		len = (sizeof(g_tbuf) - pos - 1);
-+	}
-+
-+	memcpy(&g_tbuf[pos], data, len);
-+	pos += len;
-+	g_tbuf[pos] = 0;
-+
-+#ifdef PRINT_OUTPUT_PRINTK
-+	/* 0x00 byte in the string pointed by g_tbuf may truncate the print result */
-+	TS0710_LOG("%s\n", g_tbuf);
-+#else
-+	/*printk("%s\n", g_tbuf) */ ezxlogk("MX", g_tbuf, pos);
-+#endif
-+}
-+#else
-+#define TS0710_LOGSTR_FRAME(send, data, len)
-+#endif
-+
-+#ifdef TS0710SIG
-+#define my_for_each_task(p) \
-+        for ((p) = current; ((p) = (p)->next_task) != current; )
-+
-+static void TS0710_SIG2APLOGD(void)
-+{
-+	struct task_struct *p;
-+	static __u8 sig = 0;
-+
-+	if (sig) {
-+		return;
-+	}
-+
-+	read_lock(&tasklist_lock);
-+	my_for_each_task(p) {
-+		if (strncmp(p->comm, "aplogd", 6) == 0) {
-+			sig = 1;
-+			if (send_sig(SIGUSR2, p, 1) == 0) {
-+				TS0710_PRINTK
-+				    ("MUX: success to send SIGUSR2 to aplogd!\n");
-+			} else {
-+				TS0710_PRINTK
-+				    ("MUX: failure to send SIGUSR2 to aplogd!\n");
-+			}
-+			break;
-+		}
-+	}
-+	read_unlock(&tasklist_lock);
-+
-+	if (!sig) {
-+		TS0710_PRINTK("MUX: not found aplogd!\n");
-+	}
-+}
-+#else
-+#define TS0710_SIG2APLOGD()
-+#endif
-+
-+static int basic_write(ts0710_con * ts0710, __u8 * buf, int len)
-+{
-+	int res;
-+
-+	UNUSED_PARAM(ts0710);
-+
-+	buf[0] = TS0710_BASIC_FLAG;
-+	buf[len + 1] = TS0710_BASIC_FLAG;
-+
-+	if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
-+		TS0710_PRINTK
-+		    ("MUX basic_write: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n");
-+
-+#ifndef USB_FOR_MUX
-+		TS0710_PRINTK
-+		    ("MUX basic_write: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n");
-+		TS0710_SIG2APLOGD();
-+#endif
-+
-+		return -1;
-+	}
-+
-+	TS0710_LOGSTR_FRAME(1, buf, len + 2);
-+	TS0710_DEBUGHEX(buf, len + 2);
-+
-+	res = COMM_FOR_MUX_DRIVER->write(COMM_FOR_MUX_TTY, buf, len + 2);
-+
-+	if (res != len + 2) {
-+		TS0710_PRINTK("MUX basic_write: Write Error!\n");
-+		return -1;
-+	}
-+
-+	return len + 2;
-+}
-+
-+/* Functions for the crc-check and calculation */
-+
-+#define CRC_VALID 0xcf
-+
-+static __u32 crc_check(__u8 * data, __u32 length, __u8 check_sum)
-+{
-+	__u8 fcs = 0xff;
-+
-+	while (length--) {
-+		fcs = crctable[fcs ^ *data++];
-+	}
-+	fcs = crctable[fcs ^ check_sum];
-+	TS0710_DEBUG("fcs : %d\n", fcs);
-+	if (fcs == (uint) 0xcf) {	/*CRC_VALID) */
-+		TS0710_DEBUG("crc_check: CRC check OK\n");
-+		return 0;
-+	} else {
-+		TS0710_PRINTK("MUX crc_check: CRC check failed\n");
-+		return 1;
-+	}
-+}
-+
-+/* Calculates the checksum according to the ts0710 specification */
-+
-+static __u8 crc_calc(__u8 * data, __u32 length)
-+{
-+	__u8 fcs = 0xff;
-+
-+	while (length--) {
-+		fcs = crctable[fcs ^ *data++];
-+	}
-+
-+	return 0xff - fcs;
-+}
-+
-+/* Calulates a reversed CRC table for the FCS check */
-+
-+static void create_crctable(__u8 table[])
-+{
-+	int i, j;
-+
-+	__u8 data;
-+	__u8 code_word = (__u8) 0xe0;
-+	__u8 sr = (__u8) 0;
-+
-+	for (j = 0; j < 256; j++) {
-+		data = (__u8) j;
-+
-+		for (i = 0; i < 8; i++) {
-+			if ((data & 0x1) ^ (sr & 0x1)) {
-+				sr >>= 1;
-+				sr ^= code_word;
-+			} else {
-+				sr >>= 1;
-+			}
-+
-+			data >>= 1;
-+			sr &= 0xff;
-+		}
-+
-+		table[j] = sr;
-+		sr = 0;
-+	}
-+}
-+
-+static void ts0710_reset_dlci(__u8 j)
-+{
-+	if (j >= TS0710_MAX_CHN)
-+		return;
-+
-+	ts0710_connection.dlci[j].state = DISCONNECTED;
-+	ts0710_connection.dlci[j].flow_control = 0;
-+	ts0710_connection.dlci[j].mtu = DEF_TS0710_MTU;
-+	ts0710_connection.dlci[j].initiated = 0;
-+	ts0710_connection.dlci[j].initiator = 0;
-+	init_waitqueue_head(&ts0710_connection.dlci[j].open_wait);
-+	init_waitqueue_head(&ts0710_connection.dlci[j].close_wait);
-+}
-+
-+static void ts0710_reset_con(void)
-+{
-+	__u8 j;
-+
-+	ts0710_connection.initiator = 0;
-+	ts0710_connection.mtu = DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE;
-+	ts0710_connection.be_testing = 0;
-+	ts0710_connection.test_errs = 0;
-+	init_waitqueue_head(&ts0710_connection.test_wait);
-+
-+	for (j = 0; j < TS0710_MAX_CHN; j++) {
-+		ts0710_reset_dlci(j);
-+	}
-+}
-+
-+static void ts0710_init(void)
-+{
-+	create_crctable(crctable);
-+
-+	ts0710_reset_con();
-+
-+	/* Set the values in the rpn octets */
-+/*
-+  rpn_val.bit_rate  = 7;
-+  rpn_val.data_bits = 3;
-+  rpn_val.stop_bit  = 0;
-+  rpn_val.parity    = 0;
-+  rpn_val.parity_type = 0;
-+  rpn_val.res1    = 0;
-+  rpn_val.xon_input = 0;
-+  rpn_val.xon_output  = 0;
-+  rpn_val.rtr_input = 0;
-+  rpn_val.rtr_output  = 0;
-+  rpn_val.rtc_input = 0;
-+  rpn_val.rtc_output  = 0;
-+  rpn_val.res2    = 0;
-+  rpn_val.xon_u8  = 0x11;
-+  rpn_val.xoff_u8 = 0x13;
-+	  memset(&rpn_val.pm, 0 , 2); *//* Set the mask to zero */
-+}
-+
-+static void ts0710_upon_disconnect(void)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	__u8 j;
-+
-+	for (j = 0; j < TS0710_MAX_CHN; j++) {
-+		ts0710->dlci[j].state = DISCONNECTED;
-+		wake_up_interruptible(&ts0710->dlci[j].open_wait);
-+		wake_up_interruptible(&ts0710->dlci[j].close_wait);
-+	}
-+	ts0710->be_testing = 0;
-+	wake_up_interruptible(&ts0710->test_wait);
-+	ts0710_reset_con();
-+}
-+
-+/* Sending packet functions */
-+
-+/* Creates a UA packet and puts it at the beginning of the pkt pointer */
-+
-+static int send_ua(ts0710_con * ts0710, __u8 dlci)
-+{
-+	__u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
-+	short_frame *ua;
-+
-+	TS0710_DEBUG("send_ua: Creating UA packet to DLCI %d\n", dlci);
-+
-+	ua = (short_frame *) (buf + 1);
-+	ua->h.addr.ea = 1;
-+	ua->h.addr.cr = ((~(ts0710->initiator)) & 0x1);
-+	ua->h.addr.d = (dlci) & 0x1;
-+	ua->h.addr.server_chn = (dlci) >> 0x1;
-+	ua->h.control = SET_PF(UA);
-+	ua->h.length.ea = 1;
-+	ua->h.length.len = 0;
-+	ua->data[0] = crc_calc((__u8 *) ua, SHORT_CRC_CHECK);
-+
-+	return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
-+}
-+
-+/* Creates a DM packet and puts it at the beginning of the pkt pointer */
-+
-+static int send_dm(ts0710_con * ts0710, __u8 dlci)
-+{
-+	__u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
-+	short_frame *dm;
-+
-+	TS0710_DEBUG("send_dm: Creating DM packet to DLCI %d\n", dlci);
-+
-+	dm = (short_frame *) (buf + 1);
-+	dm->h.addr.ea = 1;
-+	dm->h.addr.cr = ((~(ts0710->initiator)) & 0x1);
-+	dm->h.addr.d = dlci & 0x1;
-+	dm->h.addr.server_chn = dlci >> 0x1;
-+	dm->h.control = SET_PF(DM);
-+	dm->h.length.ea = 1;
-+	dm->h.length.len = 0;
-+	dm->data[0] = crc_calc((__u8 *) dm, SHORT_CRC_CHECK);
-+
-+	return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
-+}
-+
-+static int send_sabm(ts0710_con * ts0710, __u8 dlci)
-+{
-+	__u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
-+	short_frame *sabm;
-+
-+	TS0710_DEBUG("send_sabm: Creating SABM packet to DLCI %d\n", dlci);
-+
-+	sabm = (short_frame *) (buf + 1);
-+	sabm->h.addr.ea = 1;
-+	sabm->h.addr.cr = ((ts0710->initiator) & 0x1);
-+	sabm->h.addr.d = dlci & 0x1;
-+	sabm->h.addr.server_chn = dlci >> 0x1;
-+	sabm->h.control = SET_PF(SABM);
-+	sabm->h.length.ea = 1;
-+	sabm->h.length.len = 0;
-+	sabm->data[0] = crc_calc((__u8 *) sabm, SHORT_CRC_CHECK);
-+
-+	return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
-+}
-+
-+static int send_disc(ts0710_con * ts0710, __u8 dlci)
-+{
-+	__u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
-+	short_frame *disc;
-+
-+	TS0710_DEBUG("send_disc: Creating DISC packet to DLCI %d\n", dlci);
-+
-+	disc = (short_frame *) (buf + 1);
-+	disc->h.addr.ea = 1;
-+	disc->h.addr.cr = ((ts0710->initiator) & 0x1);
-+	disc->h.addr.d = dlci & 0x1;
-+	disc->h.addr.server_chn = dlci >> 0x1;
-+	disc->h.control = SET_PF(DISC);
-+	disc->h.length.ea = 1;
-+	disc->h.length.len = 0;
-+	disc->data[0] = crc_calc((__u8 *) disc, SHORT_CRC_CHECK);
-+
-+	return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
-+}
-+
-+static void queue_uih(mux_send_struct * send_info, __u16 len,
-+		      ts0710_con * ts0710, __u8 dlci)
-+{
-+	__u32 size;
-+
-+	TS0710_DEBUG
-+	    ("queue_uih: Creating UIH packet with %d bytes data to DLCI %d\n",
-+	     len, dlci);
-+
-+	if (len > SHORT_PAYLOAD_SIZE) {
-+		long_frame *l_pkt;
-+
-+		size = sizeof(long_frame) + len + FCS_SIZE;
-+		l_pkt = (long_frame *) (send_info->frame - sizeof(long_frame));
-+		set_uih_hdr((void *)l_pkt, dlci, len, ts0710->initiator);
-+		l_pkt->data[len] = crc_calc((__u8 *) l_pkt, LONG_CRC_CHECK);
-+		send_info->frame = ((__u8 *) l_pkt) - 1;
-+	} else {
-+		short_frame *s_pkt;
-+
-+		size = sizeof(short_frame) + len + FCS_SIZE;
-+		s_pkt =
-+		    (short_frame *) (send_info->frame - sizeof(short_frame));
-+		set_uih_hdr((void *)s_pkt, dlci, len, ts0710->initiator);
-+		s_pkt->data[len] = crc_calc((__u8 *) s_pkt, SHORT_CRC_CHECK);
-+		send_info->frame = ((__u8 *) s_pkt) - 1;
-+	}
-+	send_info->length = size;
-+}
-+
-+/* Multiplexer command packets functions */
-+
-+/* Turns on the ts0710 flow control */
-+
-+static int ts0710_fcon_msg(ts0710_con * ts0710, __u8 cr)
-+{
-+	__u8 buf[30];
-+	mcc_short_frame *mcc_pkt;
-+	short_frame *uih_pkt;
-+	__u32 size;
-+
-+	size = sizeof(short_frame) + sizeof(mcc_short_frame) + FCS_SIZE;
-+	uih_pkt = (short_frame *) (buf + 1);
-+	set_uih_hdr(uih_pkt, CTRL_CHAN, sizeof(mcc_short_frame),
-+		    ts0710->initiator);
-+	uih_pkt->data[sizeof(mcc_short_frame)] =
-+	    crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK);
-+	mcc_pkt = (mcc_short_frame *) (uih_pkt->data);
-+
-+	mcc_pkt->h.type.ea = EA;
-+	mcc_pkt->h.type.cr = cr;
-+	mcc_pkt->h.type.type = FCON;
-+	mcc_pkt->h.length.ea = EA;
-+	mcc_pkt->h.length.len = 0;
-+
-+	return basic_write(ts0710, buf, size);
-+}
-+
-+/* Turns off the ts0710 flow control */
-+
-+static int ts0710_fcoff_msg(ts0710_con * ts0710, __u8 cr)
-+{
-+	__u8 buf[30];
-+	mcc_short_frame *mcc_pkt;
-+	short_frame *uih_pkt;
-+	__u32 size;
-+
-+	size = (sizeof(short_frame) + sizeof(mcc_short_frame) + FCS_SIZE);
-+	uih_pkt = (short_frame *) (buf + 1);
-+	set_uih_hdr(uih_pkt, CTRL_CHAN, sizeof(mcc_short_frame),
-+		    ts0710->initiator);
-+	uih_pkt->data[sizeof(mcc_short_frame)] =
-+	    crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK);
-+	mcc_pkt = (mcc_short_frame *) (uih_pkt->data);
-+
-+	mcc_pkt->h.type.ea = 1;
-+	mcc_pkt->h.type.cr = cr;
-+	mcc_pkt->h.type.type = FCOFF;
-+	mcc_pkt->h.length.ea = 1;
-+	mcc_pkt->h.length.len = 0;
-+
-+	return basic_write(ts0710, buf, size);
-+}
-+
-+/*
-+static int ts0710_rpn_msg(ts0710_con *ts0710, __u8 cr, __u8 dlci, __u8 req)
-+{
-+  char buf[100];
-+  rpn_msg* rpn_pkt;
-+  __u32 fsize;
-+  __u32 psize;
-+
-+  fsize = sizeof(rpn_msg);
-+
-+  if (req) {
-+    fsize -= sizeof(rpn_values);
-+  }
-+
-+  psize = (fsize - sizeof(short_frame) - FCS_SIZE);
-+
-+  rpn_pkt = (rpn_msg *) buf;
-+
-+  set_uih_hdr((short_frame *) rpn_pkt, CTRL_CHAN, psize, ts0710->initiator);
-+
-+  rpn_pkt->fcs = crc_calc((__u8*) rpn_pkt, SHORT_CRC_CHECK);
-+
-+  rpn_pkt->mcc_s_head.type.ea = EA;
-+  rpn_pkt->mcc_s_head.type.cr = cr;
-+  rpn_pkt->mcc_s_head.type.type = RPN;
-+  rpn_pkt->mcc_s_head.length.ea = EA;
-+
-+  rpn_pkt->dlci.ea = EA;
-+  rpn_pkt->dlci.cr = 1;
-+  rpn_pkt->dlci.d = dlci & 1;
-+  rpn_pkt->dlci.server_chn = (dlci >> 1);
-+
-+  if (req) {
-+    rpn_pkt->mcc_s_head.length.len = 1;
-+    rpn_pkt->rpn_val.bit_rate = rpn_pkt->fcs;
-+  } else {
-+    rpn_pkt->mcc_s_head.length.len = 8;
-+    memcpy(&(rpn_pkt->rpn_val), &rpn_val, sizeof(rpn_values));
-+  }
-+  return basic_write(ts0710, buf, fsize);
-+}
-+*/
-+/*
-+static int ts0710_rls_msg(ts0710_con *ts0710, __u8 cr, __u8 dlci, __u8 err_code)
-+{
-+  char buf[100];
-+  rls_msg *rls_pkt;
-+  __u32 fsize;
-+  __u32 psize;
-+
-+  fsize = sizeof(rls_msg);
-+  psize = fsize - sizeof(short_frame) - FCS_SIZE;
-+  rls_pkt = (rls_msg *) buf;
-+
-+  set_uih_hdr((short_frame *) rls_pkt, CTRL_CHAN, psize, ts0710->initiator);
-+  rls_pkt->fcs = crc_calc((__u8*) rls_pkt, SHORT_CRC_CHECK);
-+
-+  rls_pkt->mcc_s_head.type.ea = EA;
-+  rls_pkt->mcc_s_head.type.cr = cr;
-+  rls_pkt->mcc_s_head.type.type = RLS;
-+  rls_pkt->mcc_s_head.length.ea = EA;
-+  rls_pkt->mcc_s_head.length.len = 2;
-+
-+  rls_pkt->dlci.ea = EA;
-+  rls_pkt->dlci.cr = 1;
-+  rls_pkt->dlci.d = dlci & 1;
-+  rls_pkt->dlci.server_chn = dlci >> 1;
-+  rls_pkt->error = err_code;
-+  rls_pkt->res = 0;
-+
-+  return basic_write(ts0710, buf, fsize);
-+}
-+*/
-+
-+/* Sends an PN-messages and sets the not negotiable parameters to their
-+   default values in ts0710 */
-+
-+static int send_pn_msg(ts0710_con * ts0710, __u8 prior, __u32 frame_size,
-+		       __u8 credit_flow, __u8 credits, __u8 dlci, __u8 cr)
-+{
-+	__u8 buf[30];
-+	pn_msg *pn_pkt;
-+	__u32 size;
-+	TS0710_DEBUG
-+	    ("send_pn_msg: DLCI 0x%02x, prior:0x%02x, frame_size:%d, credit_flow:%x, credits:%d, cr:%x\n",
-+	     dlci, prior, frame_size, credit_flow, credits, cr);
-+
-+	size = sizeof(pn_msg);
-+	pn_pkt = (pn_msg *) (buf + 1);
-+
-+	set_uih_hdr((void *)pn_pkt, CTRL_CHAN,
-+		    size - (sizeof(short_frame) + FCS_SIZE), ts0710->initiator);
-+	pn_pkt->fcs = crc_calc((__u8 *) pn_pkt, SHORT_CRC_CHECK);
-+
-+	pn_pkt->mcc_s_head.type.ea = 1;
-+	pn_pkt->mcc_s_head.type.cr = cr;
-+	pn_pkt->mcc_s_head.type.type = PN;
-+	pn_pkt->mcc_s_head.length.ea = 1;
-+	pn_pkt->mcc_s_head.length.len = 8;
-+
-+	pn_pkt->res1 = 0;
-+	pn_pkt->res2 = 0;
-+	pn_pkt->dlci = dlci;
-+	pn_pkt->frame_type = 0;
-+	pn_pkt->credit_flow = credit_flow;
-+	pn_pkt->prior = prior;
-+	pn_pkt->ack_timer = 0;
-+	SET_PN_MSG_FRAME_SIZE(pn_pkt, frame_size);
-+	pn_pkt->credits = credits;
-+	pn_pkt->max_nbrof_retrans = 0;
-+
-+	return basic_write(ts0710, buf, size);
-+}
-+
-+/* Send a Not supported command - command, which needs 3 bytes */
-+
-+static int send_nsc_msg(ts0710_con * ts0710, mcc_type cmd, __u8 cr)
-+{
-+	__u8 buf[30];
-+	nsc_msg *nsc_pkt;
-+	__u32 size;
-+
-+	size = sizeof(nsc_msg);
-+	nsc_pkt = (nsc_msg *) (buf + 1);
-+
-+	set_uih_hdr((void *)nsc_pkt, CTRL_CHAN,
-+		    sizeof(nsc_msg) - sizeof(short_frame) - FCS_SIZE,
-+		    ts0710->initiator);
-+
-+	nsc_pkt->fcs = crc_calc((__u8 *) nsc_pkt, SHORT_CRC_CHECK);
-+
-+	nsc_pkt->mcc_s_head.type.ea = 1;
-+	nsc_pkt->mcc_s_head.type.cr = cr;
-+	nsc_pkt->mcc_s_head.type.type = NSC;
-+	nsc_pkt->mcc_s_head.length.ea = 1;
-+	nsc_pkt->mcc_s_head.length.len = 1;
-+
-+	nsc_pkt->command_type.ea = 1;
-+	nsc_pkt->command_type.cr = cmd.cr;
-+	nsc_pkt->command_type.type = cmd.type;
-+
-+	return basic_write(ts0710, buf, size);
-+}
-+
-+static int ts0710_msc_msg(ts0710_con * ts0710, __u8 value, __u8 cr, __u8 dlci)
-+{
-+	__u8 buf[30];
-+	msc_msg *msc_pkt;
-+	__u32 size;
-+
-+	size = sizeof(msc_msg);
-+	msc_pkt = (msc_msg *) (buf + 1);
-+
-+	set_uih_hdr((void *)msc_pkt, CTRL_CHAN,
-+		    sizeof(msc_msg) - sizeof(short_frame) - FCS_SIZE,
-+		    ts0710->initiator);
-+
-+	msc_pkt->fcs = crc_calc((__u8 *) msc_pkt, SHORT_CRC_CHECK);
-+
-+	msc_pkt->mcc_s_head.type.ea = 1;
-+	msc_pkt->mcc_s_head.type.cr = cr;
-+	msc_pkt->mcc_s_head.type.type = MSC;
-+	msc_pkt->mcc_s_head.length.ea = 1;
-+	msc_pkt->mcc_s_head.length.len = 2;
-+
-+	msc_pkt->dlci.ea = 1;
-+	msc_pkt->dlci.cr = 1;
-+	msc_pkt->dlci.d = dlci & 1;
-+	msc_pkt->dlci.server_chn = (dlci >> 1) & 0x1f;
-+
-+	msc_pkt->v24_sigs = value;
-+
-+	return basic_write(ts0710, buf, size);
-+}
-+
-+static int ts0710_test_msg(ts0710_con * ts0710, __u8 * test_pattern, __u32 len,
-+			   __u8 cr, __u8 * f_buf /*Frame buf */ )
-+{
-+	__u32 size;
-+
-+	if (len > SHORT_PAYLOAD_SIZE) {
-+		long_frame *uih_pkt;
-+		mcc_long_frame *mcc_pkt;
-+
-+		size =
-+		    (sizeof(long_frame) + sizeof(mcc_long_frame) + len +
-+		     FCS_SIZE);
-+		uih_pkt = (long_frame *) (f_buf + 1);
-+
-+		set_uih_hdr((short_frame *) uih_pkt, CTRL_CHAN, len +
-+			    sizeof(mcc_long_frame), ts0710->initiator);
-+		uih_pkt->data[GET_LONG_LENGTH(uih_pkt->h.length)] =
-+		    crc_calc((__u8 *) uih_pkt, LONG_CRC_CHECK);
-+		mcc_pkt = (mcc_long_frame *) uih_pkt->data;
-+
-+		mcc_pkt->h.type.ea = EA;
-+		/* cr tells whether it is a commmand (1) or a response (0) */
-+		mcc_pkt->h.type.cr = cr;
-+		mcc_pkt->h.type.type = TEST;
-+		SET_LONG_LENGTH(mcc_pkt->h.length, len);
-+		memcpy(mcc_pkt->value, test_pattern, len);
-+	} else if (len > (SHORT_PAYLOAD_SIZE - sizeof(mcc_short_frame))) {
-+		long_frame *uih_pkt;
-+		mcc_short_frame *mcc_pkt;
-+
-+		/* Create long uih packet and short mcc packet */
-+		size =
-+		    (sizeof(long_frame) + sizeof(mcc_short_frame) + len +
-+		     FCS_SIZE);
-+		uih_pkt = (long_frame *) (f_buf + 1);
-+
-+		set_uih_hdr((short_frame *) uih_pkt, CTRL_CHAN,
-+			    len + sizeof(mcc_short_frame), ts0710->initiator);
-+		uih_pkt->data[GET_LONG_LENGTH(uih_pkt->h.length)] =
-+		    crc_calc((__u8 *) uih_pkt, LONG_CRC_CHECK);
-+		mcc_pkt = (mcc_short_frame *) uih_pkt->data;
-+
-+		mcc_pkt->h.type.ea = EA;
-+		mcc_pkt->h.type.cr = cr;
-+		mcc_pkt->h.type.type = TEST;
-+		mcc_pkt->h.length.ea = EA;
-+		mcc_pkt->h.length.len = len;
-+		memcpy(mcc_pkt->value, test_pattern, len);
-+	} else {
-+		short_frame *uih_pkt;
-+		mcc_short_frame *mcc_pkt;
-+
-+		size =
-+		    (sizeof(short_frame) + sizeof(mcc_short_frame) + len +
-+		     FCS_SIZE);
-+		uih_pkt = (short_frame *) (f_buf + 1);
-+
-+		set_uih_hdr((void *)uih_pkt, CTRL_CHAN, len
-+			    + sizeof(mcc_short_frame), ts0710->initiator);
-+		uih_pkt->data[uih_pkt->h.length.len] =
-+		    crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK);
-+		mcc_pkt = (mcc_short_frame *) uih_pkt->data;
-+
-+		mcc_pkt->h.type.ea = EA;
-+		mcc_pkt->h.type.cr = cr;
-+		mcc_pkt->h.type.type = TEST;
-+		mcc_pkt->h.length.ea = EA;
-+		mcc_pkt->h.length.len = len;
-+		memcpy(mcc_pkt->value, test_pattern, len);
-+
-+	}
-+	return basic_write(ts0710, f_buf, size);
-+}
-+
-+static void set_uih_hdr(short_frame * uih_pkt, __u8 dlci, __u32 len, __u8 cr)
-+{
-+	uih_pkt->h.addr.ea = 1;
-+	uih_pkt->h.addr.cr = cr;
-+	uih_pkt->h.addr.d = dlci & 0x1;
-+	uih_pkt->h.addr.server_chn = dlci >> 1;
-+	uih_pkt->h.control = CLR_PF(UIH);
-+
-+	if (len > SHORT_PAYLOAD_SIZE) {
-+		SET_LONG_LENGTH(((long_frame *) uih_pkt)->h.length, len);
-+	} else {
-+		uih_pkt->h.length.ea = 1;
-+		uih_pkt->h.length.len = len;
-+	}
-+}
-+
-+/* Parses a multiplexer control channel packet */
-+
-+void process_mcc(__u8 * data, __u32 len, ts0710_con * ts0710, int longpkt)
-+{
-+	__u8 *tbuf = NULL;
-+	mcc_short_frame *mcc_short_pkt;
-+	int j;
-+
-+	if (longpkt) {
-+		mcc_short_pkt =
-+		    (mcc_short_frame *) (((long_frame *) data)->data);
-+	} else {
-+		mcc_short_pkt =
-+		    (mcc_short_frame *) (((short_frame *) data)->data);
-+	}
-+
-+	switch (mcc_short_pkt->h.type.type) {
-+	case TEST:
-+		if (mcc_short_pkt->h.type.cr == MCC_RSP) {
-+			TS0710_DEBUG("Received test command response\n");
-+
-+			if (ts0710->be_testing) {
-+				if ((mcc_short_pkt->h.length.ea) == 0) {
-+					mcc_long_frame *mcc_long_pkt;
-+					mcc_long_pkt =
-+					    (mcc_long_frame *) mcc_short_pkt;
-+					if (GET_LONG_LENGTH
-+					    (mcc_long_pkt->h.length) !=
-+					    TEST_PATTERN_SIZE) {
-+						ts0710->test_errs =
-+						    TEST_PATTERN_SIZE;
-+						TS0710_DEBUG
-+						    ("Err: received test pattern is %d bytes long, not expected %d\n",
-+						     GET_LONG_LENGTH
-+						     (mcc_long_pkt->h.length),
-+						     TEST_PATTERN_SIZE);
-+					} else {
-+						ts0710->test_errs = 0;
-+						for (j = 0;
-+						     j < TEST_PATTERN_SIZE;
-+						     j++) {
-+							if (mcc_long_pkt->
-+							    value[j] !=
-+							    (j & 0xFF)) {
-+								(ts0710->
-+								 test_errs)++;
-+							}
-+						}
-+					}
-+
-+				} else {
-+
-+#if TEST_PATTERN_SIZE < 128
-+					if (mcc_short_pkt->h.length.len !=
-+					    TEST_PATTERN_SIZE) {
-+#endif
-+
-+						ts0710->test_errs =
-+						    TEST_PATTERN_SIZE;
-+						TS0710_DEBUG
-+						    ("Err: received test pattern is %d bytes long, not expected %d\n",
-+						     mcc_short_pkt->h.length.
-+						     len, TEST_PATTERN_SIZE);
-+
-+#if TEST_PATTERN_SIZE < 128
-+					} else {
-+						ts0710->test_errs = 0;
-+						for (j = 0;
-+						     j < TEST_PATTERN_SIZE;
-+						     j++) {
-+							if (mcc_short_pkt->
-+							    value[j] !=
-+							    (j & 0xFF)) {
-+								(ts0710->
-+								 test_errs)++;
-+							}
-+						}
-+					}
-+#endif
-+
-+				}
-+
-+				ts0710->be_testing = 0;	/* Clear the flag */
-+				wake_up_interruptible(&ts0710->test_wait);
-+			} else {
-+				TS0710_DEBUG
-+				    ("Err: shouldn't or late to get test cmd response\n");
-+			}
-+		} else {
-+			tbuf = (__u8 *) kmalloc(len + 32, GFP_ATOMIC);
-+			if (!tbuf) {
-+				break;
-+			}
-+
-+			if ((mcc_short_pkt->h.length.ea) == 0) {
-+				mcc_long_frame *mcc_long_pkt;
-+				mcc_long_pkt = (mcc_long_frame *) mcc_short_pkt;
-+				ts0710_test_msg(ts0710, mcc_long_pkt->value,
-+						GET_LONG_LENGTH(mcc_long_pkt->h.
-+								length),
-+						MCC_RSP, tbuf);
-+			} else {
-+				ts0710_test_msg(ts0710, mcc_short_pkt->value,
-+						mcc_short_pkt->h.length.len,
-+						MCC_RSP, tbuf);
-+			}
-+
-+			kfree(tbuf);
-+		}
-+		break;
-+
-+	case FCON:		/*Flow control on command */
-+		TS0710_PRINTK
-+		    ("MUX Received Flow control(all channels) on command\n");
-+		if (mcc_short_pkt->h.type.cr == MCC_CMD) {
-+			ts0710->dlci[0].state = CONNECTED;
-+			ts0710_fcon_msg(ts0710, MCC_RSP);
-+			mux_sched_send();
-+		}
-+		break;
-+
-+	case FCOFF:		/*Flow control off command */
-+		TS0710_PRINTK
-+		    ("MUX Received Flow control(all channels) off command\n");
-+		if (mcc_short_pkt->h.type.cr == MCC_CMD) {
-+			for (j = 0; j < TS0710_MAX_CHN; j++) {
-+				ts0710->dlci[j].state = FLOW_STOPPED;
-+			}
-+			ts0710_fcoff_msg(ts0710, MCC_RSP);
-+		}
-+		break;
-+
-+	case MSC:		/*Modem status command */
-+		{
-+			__u8 dlci;
-+			__u8 v24_sigs;
-+
-+			dlci = (mcc_short_pkt->value[0]) >> 2;
-+			v24_sigs = mcc_short_pkt->value[1];
-+
-+			if ((ts0710->dlci[dlci].state != CONNECTED)
-+			    && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
-+				send_dm(ts0710, dlci);
-+				break;
-+			}
-+			if (mcc_short_pkt->h.type.cr == MCC_CMD) {
-+				TS0710_DEBUG("Received Modem status command\n");
-+				if (v24_sigs & 2) {
-+					if (ts0710->dlci[dlci].state ==
-+					    CONNECTED) {
-+						TS0710_LOG
-+						    ("MUX Received Flow off on dlci %d\n",
-+						     dlci);
-+						ts0710->dlci[dlci].state =
-+						    FLOW_STOPPED;
-+					}
-+				} else {
-+					if (ts0710->dlci[dlci].state ==
-+					    FLOW_STOPPED) {
-+						ts0710->dlci[dlci].state =
-+						    CONNECTED;
-+						TS0710_LOG
-+						    ("MUX Received Flow on on dlci %d\n",
-+						     dlci);
-+						mux_sched_send();
-+					}
-+				}
-+
-+				ts0710_msc_msg(ts0710, v24_sigs, MCC_RSP, dlci);
-+/*
-+          if (!(ts0710->dlci[dlci].initiated) && !(ts0710->dlci[dlci].initiator)) {
-+            ts0710_msc_msg(ts0710, EA | RTR | RTC | DV, MCC_CMD, dlci);
-+            ts0710->dlci[dlci].initiated = 1;
-+          }
-+*/
-+			} else {
-+				TS0710_DEBUG
-+				    ("Received Modem status response\n");
-+
-+				if (v24_sigs & 2) {
-+					TS0710_DEBUG("Flow stop accepted\n");
-+				}
-+			}
-+			break;
-+		}
-+
-+		/*    case RPN:  *//*Remote port negotiation command */
-+
-+/*      {
-+        __u8 dlci;
-+
-+        dlci = (mcc_short_pkt->value[0]) >> 2;
-+
-+        if (mcc_short_pkt->h.type.cr == MCC_CMD) {
-+          if (mcc_short_pkt->h.length.len == 1) {
-+            TS0710_DEBUG("Received Remote port negotiation command\n");
-+            ts0710_rpn_msg(ts0710, MCC_RSP, dlci, 0);
-+          } else {
-+*/
-+		/* Accept the other sides settings (accept all for now) */
-+/*            TS0710_DEBUG("Received Remote port negotiation respons\n");
-+            memcpy(&rpn_val, &mcc_short_pkt->value[1], 8);
-+            ts0710_rpn_msg(ts0710, MCC_RSP, dlci, 0);
-+*/
-+		/* Zero the parametermask after response */
-+/*            memset(&rpn_val.pm, 0, 2);
-+          }
-+        }
-+        break;
-+      }
-+*/
-+/*
-+		    case RLS: *//*Remote line status */
-+/*      {
-+        __u8 dlci;
-+        __u8 err_code;
-+
-+        TS0710_DEBUG("Received Remote line status\n");
-+        if (mcc_short_pkt->h.type.cr == MCC_CMD) {
-+          dlci = mcc_short_pkt->value[0] >> 2;
-+          err_code = mcc_short_pkt->value[1];
-+
-+          ts0710_rls_msg(ts0710, MCC_RSP, dlci, err_code);
-+        }
-+        break;
-+      }
-+*/
-+	case PN:		/*DLC parameter negotiation */
-+		{
-+			__u8 dlci;
-+			__u16 frame_size;
-+			pn_msg *pn_pkt;
-+
-+			pn_pkt = (pn_msg *) data;
-+			dlci = pn_pkt->dlci;
-+			frame_size = GET_PN_MSG_FRAME_SIZE(pn_pkt);
-+			TS0710_DEBUG
-+			    ("Received DLC parameter negotiation, PN\n");
-+			if (pn_pkt->mcc_s_head.type.cr == MCC_CMD) {
-+				TS0710_DEBUG("received PN command with:\n");
-+				TS0710_DEBUG("Frame size:%d\n", frame_size);
-+
-+				frame_size =
-+				    min(frame_size, ts0710->dlci[dlci].mtu);
-+				send_pn_msg(ts0710, pn_pkt->prior, frame_size,
-+					    0, 0, dlci, MCC_RSP);
-+				ts0710->dlci[dlci].mtu = frame_size;
-+				TS0710_DEBUG("process_mcc : mtu set to %d\n",
-+					     ts0710->dlci[dlci].mtu);
-+			} else {
-+				TS0710_DEBUG("received PN response with:\n");
-+				TS0710_DEBUG("Frame size:%d\n", frame_size);
-+
-+				frame_size =
-+				    min(frame_size, ts0710->dlci[dlci].mtu);
-+				ts0710->dlci[dlci].mtu = frame_size;
-+
-+				TS0710_DEBUG
-+				    ("process_mcc : mtu set on dlci:%d to %d\n",
-+				     dlci, ts0710->dlci[dlci].mtu);
-+
-+				if (ts0710->dlci[dlci].state == NEGOTIATING) {
-+					ts0710->dlci[dlci].state = CONNECTING;
-+					wake_up_interruptible(&ts0710->
-+							      dlci[dlci].
-+							      open_wait);
-+				}
-+			}
-+			break;
-+		}
-+
-+	case NSC:		/*Non supported command resonse */
-+		TS0710_LOG("MUX Received Non supported command response\n");
-+		break;
-+
-+	default:		/*Non supported command received */
-+		TS0710_LOG("MUX Received a non supported command\n");
-+		send_nsc_msg(ts0710, mcc_short_pkt->h.type, MCC_RSP);
-+		break;
-+	}
-+}
-+
-+static mux_recv_packet *get_mux_recv_packet(__u32 size)
-+{
-+	mux_recv_packet *recv_packet;
-+
-+	TS0710_DEBUG("Enter into get_mux_recv_packet");
-+
-+	recv_packet =
-+	    (mux_recv_packet *) kmalloc(sizeof(mux_recv_packet), GFP_ATOMIC);
-+	if (!recv_packet) {
-+		return 0;
-+	}
-+
-+	recv_packet->data = (__u8 *) kmalloc(size, GFP_ATOMIC);
-+	if (!(recv_packet->data)) {
-+		kfree(recv_packet);
-+		return 0;
-+	}
-+	recv_packet->length = 0;
-+	recv_packet->next = 0;
-+	return recv_packet;
-+}
-+
-+static void free_mux_recv_packet(mux_recv_packet * recv_packet)
-+{
-+	TS0710_DEBUG("Enter into free_mux_recv_packet");
-+
-+	if (!recv_packet) {
-+		return;
-+	}
-+
-+	if (recv_packet->data) {
-+		kfree(recv_packet->data);
-+	}
-+	kfree(recv_packet);
-+}
-+
-+static void free_mux_recv_struct(mux_recv_struct * recv_info)
-+{
-+	mux_recv_packet *recv_packet1, *recv_packet2;
-+
-+	if (!recv_info) {
-+		return;
-+	}
-+
-+	recv_packet1 = recv_info->mux_packet;
-+	while (recv_packet1) {
-+		recv_packet2 = recv_packet1->next;
-+		free_mux_recv_packet(recv_packet1);
-+		recv_packet1 = recv_packet2;
-+	}
-+
-+	kfree(recv_info);
-+}
-+
-+static inline void add_post_recv_queue(mux_recv_struct ** head,
-+				       mux_recv_struct * new_item)
-+{
-+	new_item->next = *head;
-+	*head = new_item;
-+}
-+
-+static void ts0710_flow_on(__u8 dlci, ts0710_con * ts0710)
-+{
-+	int i;
-+	__u8 cmdtty;
-+	__u8 datatty;
-+	struct tty_struct *tty;
-+	mux_recv_struct *recv_info;
-+
-+	if ((ts0710->dlci[0].state != CONNECTED)
-+	    && (ts0710->dlci[0].state != FLOW_STOPPED)) {
-+		return;
-+	} else if ((ts0710->dlci[dlci].state != CONNECTED)
-+		   && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
-+		return;
-+	}
-+
-+	if (!(ts0710->dlci[dlci].flow_control)) {
-+		return;
-+	}
-+
-+	cmdtty = dlci2tty[dlci].cmdtty;
-+	datatty = dlci2tty[dlci].datatty;
-+
-+	if (cmdtty != datatty) {
-+		/* Check AT cmd tty */
-+		tty = mux_table[cmdtty];
-+		if (mux_tty[cmdtty] && tty) {
-+			if (test_bit(TTY_THROTTLED, &tty->flags)) {
-+				return;
-+			}
-+		}
-+		recv_info = mux_recv_info[cmdtty];
-+		if (mux_recv_info_flags[cmdtty] && recv_info) {
-+			if (recv_info->total) {
-+				return;
-+			}
-+		}
-+
-+		/* Check data tty */
-+		tty = mux_table[datatty];
-+		if (mux_tty[datatty] && tty) {
-+			if (test_bit(TTY_THROTTLED, &tty->flags)) {
-+				return;
-+			}
-+		}
-+		recv_info = mux_recv_info[datatty];
-+		if (mux_recv_info_flags[datatty] && recv_info) {
-+			if (recv_info->total) {
-+				return;
-+			}
-+		}
-+	}
-+
-+	for (i = 0; i < 3; i++) {
-+		if (ts0710_msc_msg(ts0710, EA | RTC | RTR | DV, MCC_CMD, dlci) <
-+		    0) {
-+			continue;
-+		} else {
-+			TS0710_LOG("MUX send Flow on on dlci %d\n", dlci);
-+			ts0710->dlci[dlci].flow_control = 0;
-+			break;
-+		}
-+	}
-+}
-+
-+static void ts0710_flow_off(struct tty_struct *tty, __u8 dlci,
-+			    ts0710_con * ts0710)
-+{
-+	int i;
-+
-+	if (test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
-+		return;
-+	}
-+
-+	if ((ts0710->dlci[0].state != CONNECTED)
-+	    && (ts0710->dlci[0].state != FLOW_STOPPED)) {
-+		return;
-+	} else if ((ts0710->dlci[dlci].state != CONNECTED)
-+		   && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
-+		return;
-+	}
-+
-+	if (ts0710->dlci[dlci].flow_control) {
-+		return;
-+	}
-+
-+	for (i = 0; i < 3; i++) {
-+		if (ts0710_msc_msg
-+		    (ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, dlci) < 0) {
-+			continue;
-+		} else {
-+			TS0710_LOG("MUX send Flow off on dlci %d\n", dlci);
-+			ts0710->dlci[dlci].flow_control = 1;
-+			break;
-+		}
-+	}
-+}
-+
-+int ts0710_recv_data(ts0710_con * ts0710, char *data, int len)
-+{
-+	short_frame *short_pkt;
-+	long_frame *long_pkt;
-+	__u8 *uih_data_start;
-+	__u32 uih_len;
-+	__u8 dlci;
-+	__u8 be_connecting;
-+#ifdef TS0710DEBUG
-+	unsigned long t;
-+#endif
-+
-+	short_pkt = (short_frame *) data;
-+
-+	dlci = short_pkt->h.addr.server_chn << 1 | short_pkt->h.addr.d;
-+	switch (CLR_PF(short_pkt->h.control)) {
-+	case SABM:
-+		TS0710_DEBUG("SABM-packet received\n");
-+
-+/*For BP UART problem
-+      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
-+        break;
-+*/
-+
-+		if (!dlci) {
-+			TS0710_DEBUG("server channel == 0\n");
-+			ts0710->dlci[0].state = CONNECTED;
-+
-+			TS0710_DEBUG("sending back UA - control channel\n");
-+			send_ua(ts0710, dlci);
-+			wake_up_interruptible(&ts0710->dlci[0].open_wait);
-+
-+		} else if (valid_dlci(dlci)) {
-+
-+			TS0710_DEBUG("Incomming connect on channel %d\n", dlci);
-+
-+			TS0710_DEBUG("sending UA, dlci %d\n", dlci);
-+			send_ua(ts0710, dlci);
-+
-+			ts0710->dlci[dlci].state = CONNECTED;
-+			wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
-+
-+		} else {
-+			TS0710_DEBUG("invalid dlci %d, sending DM\n", dlci);
-+			send_dm(ts0710, dlci);
-+		}
-+
-+		break;
-+
-+	case UA:
-+		TS0710_DEBUG("UA packet received\n");
-+
-+/*For BP UART problem
-+      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
-+        break;
-+*/
-+
-+		if (!dlci) {
-+			TS0710_DEBUG("server channel == 0\n");
-+
-+			if (ts0710->dlci[0].state == CONNECTING) {
-+				ts0710->dlci[0].state = CONNECTED;
-+				wake_up_interruptible(&ts0710->dlci[0].
-+						      open_wait);
-+			} else if (ts0710->dlci[0].state == DISCONNECTING) {
-+				ts0710_upon_disconnect();
-+			} else {
-+				TS0710_DEBUG
-+				    (" Something wrong receiving UA packet\n");
-+			}
-+		} else if (valid_dlci(dlci)) {
-+			TS0710_DEBUG("Incomming UA on channel %d\n", dlci);
-+
-+			if (ts0710->dlci[dlci].state == CONNECTING) {
-+				ts0710->dlci[dlci].state = CONNECTED;
-+				wake_up_interruptible(&ts0710->dlci[dlci].
-+						      open_wait);
-+			} else if (ts0710->dlci[dlci].state == DISCONNECTING) {
-+				ts0710->dlci[dlci].state = DISCONNECTED;
-+				wake_up_interruptible(&ts0710->dlci[dlci].
-+						      open_wait);
-+				wake_up_interruptible(&ts0710->dlci[dlci].
-+						      close_wait);
-+				ts0710_reset_dlci(dlci);
-+			} else {
-+				TS0710_DEBUG
-+				    (" Something wrong receiving UA packet\n");
-+			}
-+		} else {
-+			TS0710_DEBUG("invalid dlci %d\n", dlci);
-+		}
-+
-+		break;
-+
-+	case DM:
-+		TS0710_DEBUG("DM packet received\n");
-+
-+/*For BP UART problem
-+      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
-+        break;
-+*/
-+
-+		if (!dlci) {
-+			TS0710_DEBUG("server channel == 0\n");
-+
-+			if (ts0710->dlci[0].state == CONNECTING) {
-+				be_connecting = 1;
-+			} else {
-+				be_connecting = 0;
-+			}
-+			ts0710_upon_disconnect();
-+			if (be_connecting) {
-+				ts0710->dlci[0].state = REJECTED;
-+			}
-+		} else if (valid_dlci(dlci)) {
-+			TS0710_DEBUG("Incomming DM on channel %d\n", dlci);
-+
-+			if (ts0710->dlci[dlci].state == CONNECTING) {
-+				ts0710->dlci[dlci].state = REJECTED;
-+			} else {
-+				ts0710->dlci[dlci].state = DISCONNECTED;
-+			}
-+			wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
-+			wake_up_interruptible(&ts0710->dlci[dlci].close_wait);
-+			ts0710_reset_dlci(dlci);
-+		} else {
-+			TS0710_DEBUG("invalid dlci %d\n", dlci);
-+		}
-+
-+		break;
-+
-+	case DISC:
-+		TS0710_DEBUG("DISC packet received\n");
-+
-+/*For BP UART problem
-+      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
-+        break;
-+*/
-+
-+		if (!dlci) {
-+			TS0710_DEBUG("server channel == 0\n");
-+
-+			send_ua(ts0710, dlci);
-+			TS0710_DEBUG("DISC, sending back UA\n");
-+
-+			ts0710_upon_disconnect();
-+		} else if (valid_dlci(dlci)) {
-+			TS0710_DEBUG("Incomming DISC on channel %d\n", dlci);
-+
-+			send_ua(ts0710, dlci);
-+			TS0710_DEBUG("DISC, sending back UA\n");
-+
-+			ts0710->dlci[dlci].state = DISCONNECTED;
-+			wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
-+			wake_up_interruptible(&ts0710->dlci[dlci].close_wait);
-+			ts0710_reset_dlci(dlci);
-+		} else {
-+			TS0710_DEBUG("invalid dlci %d\n", dlci);
-+		}
-+
-+		break;
-+
-+	case UIH:
-+		TS0710_DEBUG("UIH packet received\n");
-+
-+		if ((dlci >= TS0710_MAX_CHN)) {
-+			TS0710_DEBUG("invalid dlci %d\n", dlci);
-+			send_dm(ts0710, dlci);
-+			break;
-+		}
-+
-+		if (GET_PF(short_pkt->h.control)) {
-+			TS0710_LOG
-+			    ("MUX Error %s: UIH packet with P/F set, discard it!\n",
-+			     __FUNCTION__);
-+			break;
-+		}
-+
-+		if ((ts0710->dlci[dlci].state != CONNECTED)
-+		    && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
-+			TS0710_LOG
-+			    ("MUX Error %s: DLCI %d not connected, discard it!\n",
-+			     __FUNCTION__, dlci);
-+			send_dm(ts0710, dlci);
-+			break;
-+		}
-+
-+		if ((short_pkt->h.length.ea) == 0) {
-+			TS0710_DEBUG("Long UIH packet received\n");
-+			long_pkt = (long_frame *) data;
-+			uih_len = GET_LONG_LENGTH(long_pkt->h.length);
-+			uih_data_start = long_pkt->h.data;
-+			TS0710_DEBUG("long packet length %d\n", uih_len);
-+
-+/*For BP UART problem
-+        if (crc_check(data, LONG_CRC_CHECK, *(uih_data_start + uih_len)))
-+          break;
-+*/
-+		} else {
-+			TS0710_DEBUG("Short UIH pkt received\n");
-+			uih_len = short_pkt->h.length.len;
-+			uih_data_start = short_pkt->data;
-+
-+/*For BP UART problem
-+        if (crc_check(data, SHORT_CRC_CHECK, *(uih_data_start + uih_len)))
-+          break;
-+*/
-+		}
-+
-+		if (dlci == 0) {
-+			TS0710_DEBUG("UIH on serv_channel 0\n");
-+			process_mcc(data, len, ts0710,
-+				    !(short_pkt->h.length.ea));
-+		} else if (valid_dlci(dlci)) {
-+			/* do tty dispatch */
-+			__u8 tag;
-+			__u8 tty_idx;
-+			struct tty_struct *tty;
-+			__u8 queue_data;
-+			__u8 post_recv;
-+			__u8 flow_control;
-+			mux_recv_struct *recv_info;
-+			int recv_room;
-+			mux_recv_packet *recv_packet, *recv_packet2;
-+
-+			TS0710_DEBUG("UIH on channel %d\n", dlci);
-+
-+			if (uih_len > ts0710->dlci[dlci].mtu) {
-+				TS0710_PRINTK
-+				    ("MUX Error:  DLCI:%d, uih_len:%d is bigger than mtu:%d, discard data!\n",
-+				     dlci, uih_len, ts0710->dlci[dlci].mtu);
-+				break;
-+			}
-+
-+			tag = *uih_data_start;
-+			uih_data_start++;
-+			uih_len--;
-+
-+			if (!uih_len) {
-+				break;
-+			}
-+
-+			switch (tag) {
-+			case CMDTAG:
-+				tty_idx = dlci2tty[dlci].cmdtty;
-+				TS0710_DEBUG("CMDTAG on DLCI:%d, /dev/mux%d\n",
-+					     dlci, tty_idx);
-+				TS0710_DEBUGSTR(uih_data_start, uih_len);
-+				if (!(iscmdtty[tty_idx])) {
-+					TS0710_PRINTK
-+					    ("MUX Error: %s: Wrong CMDTAG on DLCI:%d, /dev/mux%d\n",
-+					     __FUNCTION__, dlci, tty_idx);
-+				}
-+				break;
-+			case DATATAG:
-+			default:
-+				tty_idx = dlci2tty[dlci].datatty;
-+				TS0710_DEBUG
-+				    ("NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
-+				     dlci, tty_idx);
-+				if (iscmdtty[tty_idx]) {
-+					TS0710_PRINTK
-+					    ("MUX Error: %s: Wrong NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
-+					     __FUNCTION__, dlci, tty_idx);
-+				}
-+				break;
-+			}
-+			tty = mux_table[tty_idx];
-+			if ((!mux_tty[tty_idx]) || (!tty)) {
-+				TS0710_PRINTK
-+				    ("MUX: No application waiting for, discard it! /dev/mux%d\n",
-+				     tty_idx);
-+			} else {	/* Begin processing received data */
-+				if ((!mux_recv_info_flags[tty_idx])
-+				    || (!mux_recv_info[tty_idx])) {
-+					TS0710_PRINTK
-+					    ("MUX Error: No mux_recv_info, discard it! /dev/mux%d\n",
-+					     tty_idx);
-+					break;
-+				}
-+
-+				recv_info = mux_recv_info[tty_idx];
-+				if (recv_info->total > 8192) {
-+					TS0710_PRINTK
-+					    ("MUX : discard data for tty_idx:%d, recv_info->total > 8192 \n",
-+					     tty_idx);
-+					break;
-+				}
-+
-+				queue_data = 0;
-+				post_recv = 0;
-+				flow_control = 0;
-+				recv_room = 65535;
-+				if (tty->receive_room)
-+					recv_room = tty->receive_room;
-+
-+				if (test_bit(TTY_THROTTLED, &tty->flags)) {
-+					queue_data = 1;
-+				} else {
-+					if (test_bit
-+					    (TTY_DONT_FLIP, &tty->flags)) {
-+						queue_data = 1;
-+						post_recv = 1;
-+					} else if (recv_info->total) {
-+						queue_data = 1;
-+						post_recv = 1;
-+					} else if (recv_room < uih_len) {
-+						queue_data = 1;
-+						flow_control = 1;
-+					}
-+
-+					if ((recv_room -
-+					     (uih_len + recv_info->total)) <
-+					    ts0710->dlci[dlci].mtu) {
-+						flow_control = 1;
-+					}
-+				}
-+
-+				if (!queue_data) {
-+					/* Put received data into read buffer of tty */
-+					TS0710_DEBUG
-+					    ("Put received data into read buffer of /dev/mux%d",
-+					     tty_idx);
-+
-+#ifdef TS0710DEBUG
-+					t = jiffies;
-+#endif
-+
-+					(tty->ldisc.receive_buf) (tty,
-+								  uih_data_start,
-+								  NULL,
-+								  uih_len);
-+
-+#ifdef TS0710DEBUG
-+					TS0710_DEBUG
-+					    ("tty->ldisc.receive_buf take ticks: %lu",
-+					     (jiffies - t));
-+#endif
-+
-+				} else {	/* Queue data */
-+
-+					TS0710_DEBUG
-+					    ("Put received data into recv queue of /dev/mux%d",
-+					     tty_idx);
-+					if (recv_info->total) {
-+						/* recv_info is already linked into mux_recv_queue */
-+
-+						recv_packet =
-+						    get_mux_recv_packet
-+						    (uih_len);
-+						if (!recv_packet) {
-+							TS0710_PRINTK
-+							    ("MUX %s: no memory\n",
-+							     __FUNCTION__);
-+							break;
-+						}
-+
-+						memcpy(recv_packet->data,
-+						       uih_data_start, uih_len);
-+						recv_packet->length = uih_len;
-+						recv_info->total += uih_len;
-+						recv_packet->next = NULL;
-+
-+						if (!(recv_info->mux_packet)) {
-+							recv_info->mux_packet =
-+							    recv_packet;
-+						} else {
-+							recv_packet2 =
-+							    recv_info->
-+							    mux_packet;
-+							while (recv_packet2->
-+							       next) {
-+								recv_packet2 =
-+								    recv_packet2->
-+								    next;
-+							}
-+							recv_packet2->next =
-+							    recv_packet;
-+						}	/* End if( !(recv_info->mux_packet) ) */
-+					} else {	/* recv_info->total == 0 */
-+						if (uih_len >
-+						    TS0710MUX_RECV_BUF_SIZE) {
-+							TS0710_PRINTK
-+							    ("MUX Error:  tty_idx:%d, uih_len == %d is too big\n",
-+							     tty_idx, uih_len);
-+							uih_len =
-+							    TS0710MUX_RECV_BUF_SIZE;
-+						}
-+						memcpy(recv_info->data,
-+						       uih_data_start, uih_len);
-+						recv_info->length = uih_len;
-+						recv_info->total = uih_len;
-+
-+						add_post_recv_queue
-+						    (&mux_recv_queue,
-+						     recv_info);
-+					}	/* End recv_info->total == 0 */
-+				}	/* End Queue data */
-+
-+				if (flow_control) {
-+					/* Do something for flow control */
-+					ts0710_flow_off(tty, dlci, ts0710);
-+				}
-+
-+				if (tty_idx ==
-+				    dlci2tty[TS0710MUX_GPRS1_DLCI].datatty) {
-+					if (add_count
-+					    (TS0710MUX_GPRS1_RECV_COUNT_IDX,
-+					     uih_len) < 0) {
-+						post_recv_count_flag = 1;
-+						post_recv = 1;
-+						mux_data_count2
-+						    [TS0710MUX_GPRS1_RECV_COUNT_IDX]
-+						    += uih_len;
-+					}
-+				} else if (tty_idx ==
-+					   dlci2tty[TS0710MUX_GPRS2_DLCI].
-+					   datatty) {
-+					if (add_count
-+					    (TS0710MUX_GPRS2_RECV_COUNT_IDX,
-+					     uih_len) < 0) {
-+						post_recv_count_flag = 1;
-+						post_recv = 1;
-+						mux_data_count2
-+						    [TS0710MUX_GPRS2_RECV_COUNT_IDX]
-+						    += uih_len;
-+					}
-+				}
-+
-+				if (post_recv)
-+					schedule_work(&post_recv_tqueue);
-+			}	/* End processing received data */
-+		} else {
-+			TS0710_DEBUG("invalid dlci %d\n", dlci);
-+		}
-+
-+		break;
-+
-+	default:
-+		TS0710_DEBUG("illegal packet\n");
-+		break;
-+	}
-+	return 0;
-+}
-+
-+/*
-+int ts0710_send_data(ts0710_con *ts0710, __u8 dlci, __u8 *data, __u32 count)
-+{
-+  __u32 c, total = 0;
-+  __u8 tag, first;
-+
-+  if( ts0710->dlci[0].state == FLOW_STOPPED ){
-+    TS0710_DEBUG("Flow stopped on all channels, returning zero\n");
-+*/
-+/*
-+    return -EFLOWSTOPPED;
-+  } else if( ts0710->dlci[dlci].state == FLOW_STOPPED ){
-+    TS0710_DEBUG("Flow stopped, returning zero\n");
-+*/
-+/*
-+    return -EFLOWSTOPPED;
-+  } else if( ts0710->dlci[dlci].state == CONNECTED ){
-+
-+    TS0710_DEBUG("trying to send %d bytes\n", count);
-+    tag = *data;
-+    first = 1;
-+*/
-+    /* The first byte is always a Cmd/Data tag */
-+/*
-+    while( count > 1 ){
-+
-+      c = min(count, ts0710->dlci[dlci].mtu);
-+      if( queue_uih(data, c, ts0710, dlci) <= 0 ) {
-+        break;
-+      }
-+
-+      total += (c - 1);
-+      data += (c - 1);
-+      *data = tag;
-+      count -= (c - 1);
-+
-+      if( first ) {
-+        first = 0;
-+	total++;
-+      }
-+    }
-+    TS0710_DEBUG("sent %d bytes\n", total);
-+    return total;
-+  } else {
-+    TS0710_DEBUG("DLCI %d not connected\n", dlci);
-+    return -EDISCONNECTED;
-+  }
-+}
-+*/
-+
-+/* Close ts0710 channel */
-+static void ts0710_close_channel(__u8 dlci)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int try;
-+	unsigned long t;
-+
-+	TS0710_DEBUG("ts0710_disc_command on channel %d\n", dlci);
-+
-+	if ((ts0710->dlci[dlci].state == DISCONNECTED)
-+	    || (ts0710->dlci[dlci].state == REJECTED)) {
-+		return;
-+	} else if (ts0710->dlci[dlci].state == DISCONNECTING) {
-+		/* Reentry */
-+		return;
-+	} else {
-+		ts0710->dlci[dlci].state = DISCONNECTING;
-+		try = 3;
-+		while (try--) {
-+			t = jiffies;
-+			send_disc(ts0710, dlci);
-+			interruptible_sleep_on_timeout(&ts0710->dlci[dlci].
-+						       close_wait,
-+						       TS0710MUX_TIME_OUT);
-+			if (ts0710->dlci[dlci].state == DISCONNECTED) {
-+				break;
-+			} else if (signal_pending(current)) {
-+				TS0710_PRINTK
-+				    ("MUX DLCI %d Send DISC got signal!\n",
-+				     dlci);
-+				break;
-+			} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
-+				TS0710_PRINTK
-+				    ("MUX DLCI %d Send DISC timeout!\n", dlci);
-+				continue;
-+			}
-+		}
-+
-+		if (ts0710->dlci[dlci].state != DISCONNECTED) {
-+			if (dlci == 0) {	/* Control Channel */
-+				ts0710_upon_disconnect();
-+			} else {	/* Other Channel */
-+				ts0710->dlci[dlci].state = DISCONNECTED;
-+				wake_up_interruptible(&ts0710->dlci[dlci].
-+						      close_wait);
-+				ts0710_reset_dlci(dlci);
-+			}
-+		}
-+	}
-+}
-+
-+int ts0710_open_channel(__u8 dlci)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int try;
-+	int retval;
-+	unsigned long t;
-+
-+	retval = -ENODEV;
-+	if (dlci == 0) {	// control channel
-+		if ((ts0710->dlci[0].state == CONNECTED)
-+		    || (ts0710->dlci[0].state == FLOW_STOPPED)) {
-+			return 0;
-+		} else if (ts0710->dlci[0].state == CONNECTING) {
-+			/* Reentry */
-+			TS0710_PRINTK
-+			    ("MUX DLCI: 0, reentry to open DLCI 0, pid: %d, %s !\n",
-+			     current->pid, current->comm);
-+			try = 11;
-+			while (try--) {
-+				t = jiffies;
-+				interruptible_sleep_on_timeout(&ts0710->dlci[0].
-+							       open_wait,
-+							       TS0710MUX_TIME_OUT);
-+				if ((ts0710->dlci[0].state == CONNECTED)
-+				    || (ts0710->dlci[0].state ==
-+					FLOW_STOPPED)) {
-+					retval = 0;
-+					break;
-+				} else if (ts0710->dlci[0].state == REJECTED) {
-+					retval = -EREJECTED;
-+					break;
-+				} else if (ts0710->dlci[0].state ==
-+					   DISCONNECTED) {
-+					break;
-+				} else if (signal_pending(current)) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Wait for connecting got signal!\n",
-+					     dlci);
-+					retval = -EAGAIN;
-+					break;
-+				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Wait for connecting timeout!\n",
-+					     dlci);
-+					continue;
-+				} else if (ts0710->dlci[0].state == CONNECTING) {
-+					continue;
-+				}
-+			}
-+
-+			if (ts0710->dlci[0].state == CONNECTING) {
-+				ts0710->dlci[0].state = DISCONNECTED;
-+			}
-+		} else if ((ts0710->dlci[0].state != DISCONNECTED)
-+			   && (ts0710->dlci[0].state != REJECTED)) {
-+			TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
-+			return retval;
-+		} else {
-+			ts0710->initiator = 1;
-+			ts0710->dlci[0].state = CONNECTING;
-+			ts0710->dlci[0].initiator = 1;
-+			try = 10;
-+			while (try--) {
-+				t = jiffies;
-+				send_sabm(ts0710, 0);
-+				interruptible_sleep_on_timeout(&ts0710->dlci[0].
-+							       open_wait,
-+							       TS0710MUX_TIME_OUT);
-+				if ((ts0710->dlci[0].state == CONNECTED)
-+				    || (ts0710->dlci[0].state ==
-+					FLOW_STOPPED)) {
-+					retval = 0;
-+					break;
-+				} else if (ts0710->dlci[0].state == REJECTED) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Send SABM got rejected!\n",
-+					     dlci);
-+					retval = -EREJECTED;
-+					break;
-+				} else if (signal_pending(current)) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Send SABM got signal!\n",
-+					     dlci);
-+					retval = -EAGAIN;
-+					break;
-+				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Send SABM timeout!\n",
-+					     dlci);
-+					continue;
-+				}
-+			}
-+
-+			if (ts0710->dlci[0].state == CONNECTING) {
-+				ts0710->dlci[0].state = DISCONNECTED;
-+			}
-+			wake_up_interruptible(&ts0710->dlci[0].open_wait);
-+		}
-+	} else {		// other channel
-+		if ((ts0710->dlci[0].state != CONNECTED)
-+		    && (ts0710->dlci[0].state != FLOW_STOPPED)) {
-+			return retval;
-+		} else if ((ts0710->dlci[dlci].state == CONNECTED)
-+			   || (ts0710->dlci[dlci].state == FLOW_STOPPED)) {
-+			return 0;
-+		} else if ((ts0710->dlci[dlci].state == NEGOTIATING)
-+			   || (ts0710->dlci[dlci].state == CONNECTING)) {
-+			/* Reentry */
-+			try = 8;
-+			while (try--) {
-+				t = jiffies;
-+				interruptible_sleep_on_timeout(&ts0710->
-+							       dlci[dlci].
-+							       open_wait,
-+							       TS0710MUX_TIME_OUT);
-+				if ((ts0710->dlci[dlci].state == CONNECTED)
-+				    || (ts0710->dlci[dlci].state ==
-+					FLOW_STOPPED)) {
-+					retval = 0;
-+					break;
-+				} else if (ts0710->dlci[dlci].state == REJECTED) {
-+					retval = -EREJECTED;
-+					break;
-+				} else if (ts0710->dlci[dlci].state ==
-+					   DISCONNECTED) {
-+					break;
-+				} else if (signal_pending(current)) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Wait for connecting got signal!\n",
-+					     dlci);
-+					retval = -EAGAIN;
-+					break;
-+				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Wait for connecting timeout!\n",
-+					     dlci);
-+					continue;
-+				} else
-+				    if ((ts0710->dlci[dlci].state ==
-+					 NEGOTIATING)
-+					|| (ts0710->dlci[dlci].state ==
-+					    CONNECTING)) {
-+					continue;
-+				}
-+			}
-+
-+			if ((ts0710->dlci[dlci].state == NEGOTIATING)
-+			    || (ts0710->dlci[dlci].state == CONNECTING)) {
-+				ts0710->dlci[dlci].state = DISCONNECTED;
-+			}
-+		} else if ((ts0710->dlci[dlci].state != DISCONNECTED)
-+			   && (ts0710->dlci[dlci].state != REJECTED)) {
-+			TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
-+			return retval;
-+		} else {
-+			ts0710->dlci[dlci].state = NEGOTIATING;
-+			ts0710->dlci[dlci].initiator = 1;
-+			try = 3;
-+			while (try--) {
-+				t = jiffies;
-+				send_pn_msg(ts0710, 7, ts0710->dlci[dlci].mtu,
-+					    0, 0, dlci, 1);
-+				interruptible_sleep_on_timeout(&ts0710->
-+							       dlci[dlci].
-+							       open_wait,
-+							       TS0710MUX_TIME_OUT);
-+				if (ts0710->dlci[dlci].state == CONNECTING) {
-+					break;
-+				} else if (signal_pending(current)) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Send pn_msg got signal!\n",
-+					     dlci);
-+					retval = -EAGAIN;
-+					break;
-+				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
-+					TS0710_PRINTK
-+					    ("MUX DLCI:%d Send pn_msg timeout!\n",
-+					     dlci);
-+					continue;
-+				}
-+			}
-+
-+			if (ts0710->dlci[dlci].state == CONNECTING) {
-+				try = 3;
-+				while (try--) {
-+					t = jiffies;
-+					send_sabm(ts0710, dlci);
-+					interruptible_sleep_on_timeout(&ts0710->
-+								       dlci
-+								       [dlci].
-+								       open_wait,
-+								       TS0710MUX_TIME_OUT);
-+					if ((ts0710->dlci[dlci].state ==
-+					     CONNECTED)
-+					    || (ts0710->dlci[dlci].state ==
-+						FLOW_STOPPED)) {
-+						retval = 0;
-+						break;
-+					} else if (ts0710->dlci[dlci].state ==
-+						   REJECTED) {
-+						TS0710_PRINTK
-+						    ("MUX DLCI:%d Send SABM got rejected!\n",
-+						     dlci);
-+						retval = -EREJECTED;
-+						break;
-+					} else if (signal_pending(current)) {
-+						TS0710_PRINTK
-+						    ("MUX DLCI:%d Send SABM got signal!\n",
-+						     dlci);
-+						retval = -EAGAIN;
-+						break;
-+					} else if ((jiffies - t) >=
-+						   TS0710MUX_TIME_OUT) {
-+						TS0710_PRINTK
-+						    ("MUX DLCI:%d Send SABM timeout!\n",
-+						     dlci);
-+						continue;
-+					}
-+				}
-+			}
-+
-+			if ((ts0710->dlci[dlci].state == NEGOTIATING)
-+			    || (ts0710->dlci[dlci].state == CONNECTING)) {
-+				ts0710->dlci[dlci].state = DISCONNECTED;
-+			}
-+			wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
-+		}
-+	}
-+	return retval;
-+}
-+
-+static int ts0710_exec_test_cmd(void)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	__u8 *f_buf;		/* Frame buffer */
-+	__u8 *d_buf;		/* Data buffer */
-+	int retval = -EFAULT;
-+	int j;
-+	unsigned long t;
-+
-+	if (ts0710->be_testing) {
-+		/* Reentry */
-+		t = jiffies;
-+		interruptible_sleep_on_timeout(&ts0710->test_wait,
-+					       3 * TS0710MUX_TIME_OUT);
-+		if (ts0710->be_testing == 0) {
-+			if (ts0710->test_errs == 0) {
-+				retval = 0;
-+			} else {
-+				retval = -EFAULT;
-+			}
-+		} else if (signal_pending(current)) {
-+			TS0710_DEBUG
-+			    ("Wait for Test_cmd response got signal!\n");
-+			retval = -EAGAIN;
-+		} else if ((jiffies - t) >= 3 * TS0710MUX_TIME_OUT) {
-+			TS0710_DEBUG("Wait for Test_cmd response timeout!\n");
-+			retval = -EFAULT;
-+		}
-+	} else {
-+		ts0710->be_testing = 1;	/* Set the flag */
-+
-+		f_buf = (__u8 *) kmalloc(TEST_PATTERN_SIZE + 32, GFP_KERNEL);
-+		d_buf = (__u8 *) kmalloc(TEST_PATTERN_SIZE + 32, GFP_KERNEL);
-+		if ((!f_buf) || (!d_buf)) {
-+			if (f_buf) {
-+				kfree(f_buf);
-+			}
-+			if (d_buf) {
-+				kfree(d_buf);
-+			}
-+
-+			ts0710->be_testing = 0;	/* Clear the flag */
-+			ts0710->test_errs = TEST_PATTERN_SIZE;
-+			wake_up_interruptible(&ts0710->test_wait);
-+			return -ENOMEM;
-+		}
-+
-+		for (j = 0; j < TEST_PATTERN_SIZE; j++) {
-+			d_buf[j] = j & 0xFF;
-+		}
-+
-+		t = jiffies;
-+		ts0710_test_msg(ts0710, d_buf, TEST_PATTERN_SIZE, MCC_CMD,
-+				f_buf);
-+		interruptible_sleep_on_timeout(&ts0710->test_wait,
-+					       2 * TS0710MUX_TIME_OUT);
-+		if (ts0710->be_testing == 0) {
-+			if (ts0710->test_errs == 0) {
-+				retval = 0;
-+			} else {
-+				retval = -EFAULT;
-+			}
-+		} else if (signal_pending(current)) {
-+			TS0710_DEBUG("Send Test_cmd got signal!\n");
-+			retval = -EAGAIN;
-+		} else if ((jiffies - t) >= 2 * TS0710MUX_TIME_OUT) {
-+			TS0710_DEBUG("Send Test_cmd timeout!\n");
-+			ts0710->test_errs = TEST_PATTERN_SIZE;
-+			retval = -EFAULT;
-+		}
-+
-+		ts0710->be_testing = 0;	/* Clear the flag */
-+		wake_up_interruptible(&ts0710->test_wait);
-+
-+		/* Release buffer */
-+		if (f_buf) {
-+			kfree(f_buf);
-+		}
-+		if (d_buf) {
-+			kfree(d_buf);
-+		}
-+	}
-+
-+	return retval;
-+}
-+
-+static void mux_sched_send(void)
-+{
-+
-+#ifdef USB_FOR_MUX
-+	schedule_work(&send_tqueue);
-+#else
-+	if (!tq_serial_for_mux) {
-+		TS0710_PRINTK("MUX Error: %s: tq_serial_for_mux == 0\n",
-+			      __FUNCTION__);
-+		return;
-+	}
-+	schedule_work(&send_tqueue);
-+	mark_bh(SERIAL_BH);
-+#endif
-+
-+}
-+
-+/****************************
-+ * TTY driver routines
-+*****************************/
-+
-+static void mux_close(struct tty_struct *tty, struct file *filp)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int line;
-+	__u8 dlci;
-+	__u8 cmdtty;
-+	__u8 datatty;
-+
-+	UNUSED_PARAM(filp);
-+
-+	if (!tty) {
-+		return;
-+	}
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		return;
-+	}
-+	if (mux_tty[line] > 0)
-+		mux_tty[line]--;
-+
-+	dlci = tty2dlci[line];
-+	cmdtty = dlci2tty[dlci].cmdtty;
-+	datatty = dlci2tty[dlci].datatty;
-+	if ((mux_tty[cmdtty] == 0) && (mux_tty[datatty] == 0)) {
-+		if (dlci == 1) {
-+			ts0710_close_channel(0);
-+			TS0710_PRINTK
-+			    ("MUX mux_close: tapisrv might be down!!! Close DLCI 1\n");
-+			TS0710_SIG2APLOGD();
-+		}
-+		ts0710_close_channel(dlci);
-+	}
-+
-+	if (mux_tty[line] == 0) {
-+		if ((mux_send_info_flags[line])
-+		    && (mux_send_info[line])
-+		    /*&& (mux_send_info[line]->filled == 0) */
-+		    ) {
-+			mux_send_info_flags[line] = 0;
-+			kfree(mux_send_info[line]);
-+			mux_send_info[line] = 0;
-+			TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line);
-+		}
-+
-+		if ((mux_recv_info_flags[line])
-+		    && (mux_recv_info[line])
-+		    && (mux_recv_info[line]->total == 0)) {
-+			mux_recv_info_flags[line] = 0;
-+			free_mux_recv_struct(mux_recv_info[line]);
-+			mux_recv_info[line] = 0;
-+			TS0710_DEBUG("Free mux_recv_info for /dev/mux%d", line);
-+		}
-+
-+		ts0710_flow_on(dlci, ts0710);
-+		schedule_work(&post_recv_tqueue);
-+
-+		wake_up_interruptible(&tty->read_wait);
-+		wake_up_interruptible(&tty->write_wait);
-+		tty->packet = 0;
-+	}
-+}
-+
-+static void mux_throttle(struct tty_struct *tty)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int line;
-+	int i;
-+	__u8 dlci;
-+
-+	if (!tty) {
-+		return;
-+	}
-+
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		return;
-+	}
-+
-+	TS0710_DEBUG("Enter into %s, minor number is: %d\n", __FUNCTION__,
-+		     line);
-+
-+	dlci = tty2dlci[line];
-+	if ((ts0710->dlci[0].state != CONNECTED)
-+	    && (ts0710->dlci[0].state != FLOW_STOPPED)) {
-+		return;
-+	} else if ((ts0710->dlci[dlci].state != CONNECTED)
-+		   && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
-+		return;
-+	}
-+
-+	if (ts0710->dlci[dlci].flow_control) {
-+		return;
-+	}
-+
-+	for (i = 0; i < 3; i++) {
-+		if (ts0710_msc_msg
-+		    (ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, dlci) < 0) {
-+			continue;
-+		} else {
-+			TS0710_LOG("MUX Send Flow off on dlci %d\n", dlci);
-+			ts0710->dlci[dlci].flow_control = 1;
-+			break;
-+		}
-+	}
-+}
-+
-+static void mux_unthrottle(struct tty_struct *tty)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int line;
-+	__u8 dlci;
-+	mux_recv_struct *recv_info;
-+
-+	if (!tty) {
-+		return;
-+	}
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		return;
-+	}
-+
-+	if ((!mux_recv_info_flags[line]) || (!mux_recv_info[line])) {
-+		return;
-+	}
-+
-+	TS0710_DEBUG("Enter into %s, minor number is: %d\n", __FUNCTION__,
-+		     line);
-+
-+	recv_info = mux_recv_info[line];
-+	dlci = tty2dlci[line];
-+
-+	if (recv_info->total) {
-+		recv_info->post_unthrottle = 1;
-+		schedule_work(&post_recv_tqueue);
-+	} else {
-+		ts0710_flow_on(dlci, ts0710);
-+	}
-+}
-+
-+static int mux_chars_in_buffer(struct tty_struct *tty)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int retval;
-+	int line;
-+	__u8 dlci;
-+	mux_send_struct *send_info;
-+
-+	retval = TS0710MUX_MAX_CHARS_IN_BUF;
-+	if (!tty) {
-+		goto out;
-+	}
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		goto out;
-+	}
-+
-+	dlci = tty2dlci[line];
-+	if (ts0710->dlci[0].state == FLOW_STOPPED) {
-+		TS0710_DEBUG
-+		    ("Flow stopped on all channels, returning MAX chars in buffer\n");
-+		goto out;
-+	} else if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
-+		TS0710_DEBUG("Flow stopped, returning MAX chars in buffer\n");
-+		goto out;
-+	} else if (ts0710->dlci[dlci].state != CONNECTED) {
-+		TS0710_DEBUG("DLCI %d not connected\n", dlci);
-+		goto out;
-+	}
-+
-+	if (!(mux_send_info_flags[line])) {
-+		goto out;
-+	}
-+	send_info = mux_send_info[line];
-+	if (!send_info) {
-+		goto out;
-+	}
-+	if (send_info->filled) {
-+		goto out;
-+	}
-+
-+	retval = 0;
-+
-+      out:
-+	return retval;
-+}
-+
-+static int mux_chars_in_serial_buffer(struct tty_struct *tty)
-+{
-+	UNUSED_PARAM(tty);
-+
-+	if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
-+		TS0710_PRINTK
-+		    ("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n",
-+		     __FUNCTION__);
-+
-+#ifndef USB_FOR_MUX
-+		TS0710_PRINTK
-+		    ("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n",
-+		     __FUNCTION__);
-+		TS0710_SIG2APLOGD();
-+#endif
-+
-+		return 0;
-+	}
-+	return COMM_FOR_MUX_DRIVER->chars_in_buffer(COMM_FOR_MUX_TTY);
-+}
-+
-+static int mux_write(struct tty_struct *tty,
-+		     const unsigned char *buf, int count)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int line;
-+	__u8 dlci;
-+	mux_send_struct *send_info;
-+	__u8 *d_buf;
-+	__u16 c;
-+	__u8 post_recv;
-+
-+	if (count <= 0) {
-+		return 0;
-+	}
-+
-+	if (!tty) {
-+		return 0;
-+	}
-+
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS))
-+		return -ENODEV;
-+
-+	dlci = tty2dlci[line];
-+	if (ts0710->dlci[0].state == FLOW_STOPPED) {
-+		TS0710_DEBUG
-+		    ("Flow stopped on all channels, returning zero /dev/mux%d\n",
-+		     line);
-+		return 0;
-+	} else if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
-+		TS0710_DEBUG("Flow stopped, returning zero /dev/mux%d\n", line);
-+		return 0;
-+	} else if (ts0710->dlci[dlci].state == CONNECTED) {
-+
-+		if (!(mux_send_info_flags[line])) {
-+			TS0710_PRINTK
-+			    ("MUX Error: mux_write: mux_send_info_flags[%d] == 0\n",
-+			     line);
-+			return -ENODEV;
-+		}
-+		send_info = mux_send_info[line];
-+		if (!send_info) {
-+			TS0710_PRINTK
-+			    ("MUX Error: mux_write: mux_send_info[%d] == 0\n",
-+			     line);
-+			return -ENODEV;
-+		}
-+
-+		c = min(count, (ts0710->dlci[dlci].mtu - 1));
-+		if (c <= 0) {
-+			return 0;
-+		}
-+
-+		if (test_and_set_bit(BUF_BUSY, &send_info->flags))
-+			return 0;
-+
-+		if (send_info->filled) {
-+			clear_bit(BUF_BUSY, &send_info->flags);
-+			return 0;
-+		}
-+
-+		d_buf = ((__u8 *) send_info->buf) + TS0710MUX_SEND_BUF_OFFSET;
-+		memcpy(&d_buf[1], buf, c);
-+
-+		TS0710_DEBUG("Prepare to send %d bytes from /dev/mux%d", c,
-+			     line);
-+		if (iscmdtty[line]) {
-+			TS0710_DEBUGSTR(&d_buf[1], c);
-+			TS0710_DEBUG("CMDTAG");
-+			d_buf[0] = CMDTAG;
-+		} else {
-+			TS0710_DEBUG("DATATAG");
-+			d_buf[0] = DATATAG;
-+		}
-+
-+		TS0710_DEBUGHEX(d_buf, c + 1);
-+
-+		send_info->frame = d_buf;
-+		queue_uih(send_info, c + 1, ts0710, dlci);
-+		send_info->filled = 1;
-+		clear_bit(BUF_BUSY, &send_info->flags);
-+
-+		post_recv = 0;
-+		if (dlci == TS0710MUX_GPRS1_DLCI) {
-+			if (add_count
-+			    (TS0710MUX_GPRS1_SEND_COUNT_IDX, c) < 0) {
-+				post_recv_count_flag = 1;
-+				post_recv = 1;
-+				mux_data_count2[TS0710MUX_GPRS1_SEND_COUNT_IDX]
-+				    += c;
-+			}
-+		} else if (dlci == TS0710MUX_GPRS2_DLCI) {
-+			if (add_count
-+			    (TS0710MUX_GPRS2_SEND_COUNT_IDX, c) < 0) {
-+				post_recv_count_flag = 1;
-+				post_recv = 1;
-+				mux_data_count2[TS0710MUX_GPRS2_SEND_COUNT_IDX]
-+				    += c;
-+			}
-+		}
-+
-+		if (post_recv)
-+			schedule_work(&post_recv_tqueue);
-+
-+		if (mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY) == 0) {
-+			/* Sending bottom half should be
-+			   run after return from this function */
-+			mux_sched_send();
-+		}
-+		return c;
-+	} else {
-+		TS0710_PRINTK("MUX mux_write: DLCI %d not connected\n", dlci);
-+		return -EDISCONNECTED;
-+	}
-+}
-+
-+static int mux_write_room(struct tty_struct *tty)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int retval;
-+	int line;
-+	__u8 dlci;
-+	mux_send_struct *send_info;
-+
-+	retval = 0;
-+	if (!tty) {
-+		goto out;
-+	}
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		goto out;
-+	}
-+
-+	dlci = tty2dlci[line];
-+	if (ts0710->dlci[0].state == FLOW_STOPPED) {
-+		TS0710_DEBUG("Flow stopped on all channels, returning ZERO\n");
-+		goto out;
-+	} else if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
-+		TS0710_DEBUG("Flow stopped, returning ZERO\n");
-+		goto out;
-+	} else if (ts0710->dlci[dlci].state != CONNECTED) {
-+		TS0710_DEBUG("DLCI %d not connected\n", dlci);
-+		goto out;
-+	}
-+
-+	if (!(mux_send_info_flags[line])) {
-+		goto out;
-+	}
-+	send_info = mux_send_info[line];
-+	if (!send_info) {
-+		goto out;
-+	}
-+	if (send_info->filled) {
-+		goto out;
-+	}
-+
-+	retval = ts0710->dlci[dlci].mtu - 1;
-+
-+      out:
-+	return retval;
-+}
-+
-+static int mux_ioctl(struct tty_struct *tty, struct file *file,
-+		     unsigned int cmd, unsigned long arg)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int line;
-+	__u8 dlci;
-+
-+	UNUSED_PARAM(file);
-+	UNUSED_PARAM(arg);
-+
-+	if (!tty) {
-+		return -EIO;
-+	}
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		return -ENODEV;
-+	}
-+
-+	dlci = tty2dlci[line];
-+	switch (cmd) {
-+	case TS0710MUX_IO_MSC_HANGUP:
-+		if (ts0710_msc_msg(ts0710, EA | RTR | DV, MCC_CMD, dlci) < 0) {
-+			return -EAGAIN;
-+		} else {
-+			return 0;
-+		}
-+
-+	case TS0710MUX_IO_TEST_CMD:
-+		return ts0710_exec_test_cmd();
-+/*
-+    case TS0710MUX_IO_DLCI_FC_ON:
-+      if( line == 0 ) {
-+        break;
-+      }
-+      if( ts0710_msc_msg(ts0710, EA | RTC | RTR | DV, MCC_CMD, (__u8)line) < 0) {
-+        return -EAGAIN;
-+      } else {
-+        return 0;
-+      }
-+
-+    case TS0710MUX_IO_DLCI_FC_OFF:
-+      if( line == 0 ) {
-+        break;
-+      }
-+      if( ts0710_msc_msg(ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, (__u8)line) < 0) {
-+        return -EAGAIN;
-+      } else {
-+        return 0;
-+      }
-+
-+    case TS0710MUX_IO_FC_ON:
-+      if( line != 0 ) {
-+        break;
-+      }
-+      if( ts0710_fcon_msg(ts0710, MCC_CMD) < 0) {
-+        return -EAGAIN;
-+      } else {
-+        return 0;
-+      }
-+
-+    case TS0710MUX_IO_FC_OFF:
-+      if( line != 0 ) {
-+        break;
-+      }
-+      if( ts0710_fcoff_msg(ts0710, MCC_CMD) < 0) {
-+        return -EAGAIN;
-+      } else {
-+        return 0;
-+      }
-+*/
-+	default:
-+		break;
-+	}
-+	return -ENOIOCTLCMD;
-+}
-+
-+static void mux_flush_buffer(struct tty_struct *tty)
-+{
-+	int line;
-+
-+	if (!tty) {
-+		return;
-+	}
-+
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		return;
-+	}
-+
-+	TS0710_PRINTK("MUX %s: line is:%d\n", __FUNCTION__, line);
-+
-+	if ((mux_send_info_flags[line])
-+	    && (mux_send_info[line])
-+	    && (mux_send_info[line]->filled)) {
-+
-+		mux_send_info[line]->filled = 0;
-+	}
-+
-+	wake_up_interruptible(&tty->write_wait);
-+#ifdef SERIAL_HAVE_POLL_WAIT
-+	wake_up_interruptible(&tty->poll_wait);
-+#endif
-+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-+	    tty->ldisc.write_wakeup) {
-+		(tty->ldisc.write_wakeup) (tty);
-+	}
-+
-+/*
-+  if( (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0) ) {
-+    TS0710_PRINTK("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__);
-+
-+#ifndef USB_FOR_MUX
-+    TS0710_PRINTK("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__);
-+    TS0710_SIG2APLOGD();
-+#endif
-+
-+    return;
-+  }
-+  return COMM_FOR_MUX_DRIVER->flush_buffer(COMM_FOR_MUX_TTY);
-+*/
-+}
-+
-+static int mux_open(struct tty_struct *tty, struct file *filp)
-+{
-+	int retval;
-+	int line;
-+	__u8 dlci;
-+	__u8 cmdtty;
-+	__u8 datatty;
-+	mux_send_struct *send_info;
-+	mux_recv_struct *recv_info;
-+
-+	UNUSED_PARAM(filp);
-+
-+	retval = -ENODEV;
-+	if ((COMM_FOR_MUX_DRIVER == NULL) || (COMM_FOR_MUX_TTY == NULL)) {
-+
-+#ifdef USB_FOR_MUX
-+		TS0710_PRINTK("MUX: please install and open IPC-USB first\n");
-+#else
-+		TS0710_PRINTK("MUX: please install and open ttyS0 first\n");
-+#endif
-+
-+		goto out;
-+	}
-+
-+	if (!tty) {
-+		goto out;
-+	}
-+	line = tty->index;
-+	if ((line < 0) || (line >= NR_MUXS)) {
-+		goto out;
-+	}
-+#ifdef TS0710SERVER
-+	/* do nothing as a server */
-+	mux_tty[line]++;
-+	retval = 0;
-+#else
-+	mux_tty[line]++;
-+	dlci = tty2dlci[line];
-+
-+/*  if( dlci == 1 ) { */
-+	/* Open server channel 0 first */
-+	if ((retval = ts0710_open_channel(0)) != 0) {
-+		TS0710_PRINTK("MUX: Can't connect server channel 0!\n");
-+		ts0710_init();
-+
-+		mux_tty[line]--;
-+		goto out;
-+	}
-+/*  } */
-+
-+	/* Allocate memory first. As soon as connection has been established, MUX may receive */
-+	if (mux_send_info_flags[line] == 0) {
-+		send_info =
-+		    (mux_send_struct *) kmalloc(sizeof(mux_send_struct),
-+						GFP_KERNEL);
-+		if (!send_info) {
-+			retval = -ENOMEM;
-+
-+			mux_tty[line]--;
-+			goto out;
-+		}
-+		send_info->length = 0;
-+		send_info->flags = 0;
-+		send_info->filled = 0;
-+		mux_send_info[line] = send_info;
-+		mux_send_info_flags[line] = 1;
-+		TS0710_DEBUG("Allocate mux_send_info for /dev/mux%d", line);
-+	}
-+
-+	if (mux_recv_info_flags[line] == 0) {
-+		recv_info =
-+		    (mux_recv_struct *) kmalloc(sizeof(mux_recv_struct),
-+						GFP_KERNEL);
-+		if (!recv_info) {
-+			mux_send_info_flags[line] = 0;
-+			kfree(mux_send_info[line]);
-+			mux_send_info[line] = 0;
-+			TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line);
-+			retval = -ENOMEM;
-+
-+			mux_tty[line]--;
-+			goto out;
-+		}
-+		recv_info->length = 0;
-+		recv_info->total = 0;
-+		recv_info->mux_packet = 0;
-+		recv_info->next = 0;
-+		recv_info->no_tty = line;
-+		recv_info->post_unthrottle = 0;
-+		mux_recv_info[line] = recv_info;
-+		mux_recv_info_flags[line] = 1;
-+		TS0710_DEBUG("Allocate mux_recv_info for /dev/mux%d", line);
-+	}
-+
-+	/* Now establish DLCI connection */
-+	cmdtty = dlci2tty[dlci].cmdtty;
-+	datatty = dlci2tty[dlci].datatty;
-+	if ((mux_tty[cmdtty] > 0) || (mux_tty[datatty] > 0)) {
-+		if ((retval = ts0710_open_channel(dlci)) != 0) {
-+			TS0710_PRINTK("MUX: Can't connected channel %d!\n",
-+				      dlci);
-+			ts0710_reset_dlci(dlci);
-+
-+			mux_send_info_flags[line] = 0;
-+			kfree(mux_send_info[line]);
-+			mux_send_info[line] = 0;
-+			TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line);
-+
-+			mux_recv_info_flags[line] = 0;
-+			free_mux_recv_struct(mux_recv_info[line]);
-+			mux_recv_info[line] = 0;
-+			TS0710_DEBUG("Free mux_recv_info for /dev/mux%d", line);
-+
-+			mux_tty[line]--;
-+			goto out;
-+		}
-+	}
-+
-+	retval = 0;
-+#endif
-+      out:
-+	return retval;
-+}
-+
-+/* mux dispatcher, call from serial.c receiver_chars() */
-+void mux_dispatcher(struct tty_struct *tty)
-+{
-+	UNUSED_PARAM(tty);
-+
-+	schedule_work(&receive_tqueue);
-+}
-+
-+/*For BP UART problem Begin*/
-+#ifdef TS0710SEQ2
-+static int send_ack(ts0710_con * ts0710, __u8 seq_num, __u8 bp_seq1,
-+		    __u8 bp_seq2)
-+#else
-+static int send_ack(ts0710_con * ts0710, __u8 seq_num)
-+#endif
-+{
-+	__u8 buf[20];
-+	short_frame *ack;
-+
-+#ifdef TS0710SEQ2
-+	static __u16 ack_seq = 0;
-+#endif
-+
-+	ack = (short_frame *) (buf + 1);
-+	ack->h.addr.ea = 1;
-+	ack->h.addr.cr = ((ts0710->initiator) & 0x1);
-+	ack->h.addr.d = 0;
-+	ack->h.addr.server_chn = 0;
-+	ack->h.control = ACK;
-+	ack->h.length.ea = 1;
-+
-+#ifdef TS0710SEQ2
-+	ack->h.length.len = 5;
-+	ack->data[0] = seq_num;
-+	ack->data[1] = bp_seq1;
-+	ack->data[2] = bp_seq2;
-+	ack->data[3] = (ack_seq & 0xFF);
-+	ack->data[4] = (ack_seq >> 8) & 0xFF;
-+	ack_seq++;
-+	ack->data[5] = crc_calc((__u8 *) ack, SHORT_CRC_CHECK);
-+#else
-+	ack->h.length.len = 1;
-+	ack->data[0] = seq_num;
-+	ack->data[1] = crc_calc((__u8 *) ack, SHORT_CRC_CHECK);
-+#endif
-+
-+	return basic_write(ts0710, buf,
-+			   (sizeof(short_frame) + FCS_SIZE +
-+			    ack->h.length.len));
-+}
-+
-+/*For BP UART problem End*/
-+
-+static void receive_worker(void *private_)
-+{
-+	struct tty_struct *tty = COMM_FOR_MUX_TTY;
-+	int i, count;
-+	static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
-+	static unsigned char *tbuf_ptr = &tbuf[0];
-+	static unsigned char *start_flag = 0;
-+	unsigned char *search, *to, *from;
-+	short_frame *short_pkt;
-+	long_frame *long_pkt;
-+	static int framelen = -1;
-+
-+	/*For BP UART problem Begin */
-+	static __u8 expect_seq = 0;
-+	__u32 crc_error;
-+	__u8 *uih_data_start;
-+	__u32 uih_len;
-+	/*For BP UART problem End */
-+
-+	UNUSED_PARAM(private_);
-+
-+	if (!tty)
-+		return;
-+
-+#ifdef USB_FOR_MUX
-+	TS0710_DEBUG("Receive following bytes from IPC-USB");
-+#else
-+	TS0710_DEBUG("Receive following bytes from UART");
-+#endif
-+
-+	TS0710_DEBUGHEX(cp, count);
-+
-+	if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
-+		TS0710_PRINTK
-+		    ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
-+		count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
-+	}
-+
-+	count = tty_buffer_request_room(tty, count);
-+
-+	for (i = 0; i < count; i++)
-+		tty_insert_flip_char(tty, tbuf_ptr[i], TTY_NORMAL);
-+
-+	tbuf_ptr += count;
-+	search = &tbuf[0];
-+
-+	if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
-+		schedule_work(&receive_tqueue);
-+		return;
-+	}
-+
-+	if ((start_flag != 0) && (framelen != -1)) {
-+		if ((tbuf_ptr - start_flag) < framelen) {
-+			clear_bit(RECV_RUNNING, &mux_recv_flags);
-+			return;
-+		}
-+	}
-+
-+	while (1) {
-+		if (start_flag == 0) {	/* Frame Start Flag not found */
-+			framelen = -1;
-+			while (search < tbuf_ptr) {
-+				if (*search == TS0710_BASIC_FLAG) {
-+					start_flag = search;
-+					break;
-+				}
-+#ifdef TS0710LOG
-+				else {
-+					TS0710_LOG(">S %02x %c\n", *search,
-+						   *search);
-+				}
-+#endif
-+
-+				search++;
-+			}
-+
-+			if (start_flag == 0) {
-+				tbuf_ptr = &tbuf[0];
-+				break;
-+			}
-+		} else {	/* Frame Start Flag found */
-+			/* 1 start flag + 1 address + 1 control + 1 or 2 length + lengths data + 1 FCS + 1 end flag */
-+			/* For BP UART problem 1 start flag + 1 seq_num + 1 address + ...... */
-+			/*if( (framelen == -1) && ((tbuf_ptr - start_flag) > TS0710_MAX_HDR_SIZE) ) */
-+			if ((framelen == -1) && ((tbuf_ptr - start_flag) > (TS0710_MAX_HDR_SIZE + SEQ_FIELD_SIZE))) {	/*For BP UART problem */
-+				/*short_pkt = (short_frame *) (start_flag + 1); */
-+				short_pkt = (short_frame *) (start_flag + ADDRESS_FIELD_OFFSET);	/*For BP UART problem */
-+				if (short_pkt->h.length.ea == 1) {	/* short frame */
-+					/*framelen = TS0710_MAX_HDR_SIZE + short_pkt->h.length.len + 1; */
-+					framelen = TS0710_MAX_HDR_SIZE + short_pkt->h.length.len + 1 + SEQ_FIELD_SIZE;	/*For BP UART problem */
-+				} else {	/* long frame */
-+					/*long_pkt = (long_frame *) (start_flag + 1); */
-+					long_pkt = (long_frame *) (start_flag + ADDRESS_FIELD_OFFSET);	/*For BP UART problem */
-+					/*framelen = TS0710_MAX_HDR_SIZE + GET_LONG_LENGTH( long_pkt->h.length ) + 2; */
-+					framelen = TS0710_MAX_HDR_SIZE + GET_LONG_LENGTH(long_pkt->h.length) + 2 + SEQ_FIELD_SIZE;	/*For BP UART problem */
-+				}
-+
-+				/*if( framelen > TS0710MUX_MAX_TOTAL_FRAME_SIZE ) { */
-+				if (framelen > (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE)) {	/*For BP UART problem */
-+					TS0710_LOGSTR_FRAME(0, start_flag,
-+							    (tbuf_ptr -
-+							     start_flag));
-+					TS0710_PRINTK
-+					    ("MUX Error: %s: frame length:%d is bigger than Max total frame size:%d\n",
-+		 /*__FUNCTION__, framelen, TS0710MUX_MAX_TOTAL_FRAME_SIZE);*/
-+					     __FUNCTION__, framelen, (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE));	/*For BP UART problem */
-+					search = start_flag + 1;
-+					start_flag = 0;
-+					framelen = -1;
-+					continue;
-+				}
-+			}
-+
-+			if ((framelen != -1)
-+			    && ((tbuf_ptr - start_flag) >= framelen)) {
-+				if (*(start_flag + framelen - 1) == TS0710_BASIC_FLAG) {	/* OK, We got one frame */
-+
-+					/*For BP UART problem Begin */
-+					TS0710_LOGSTR_FRAME(0, start_flag,
-+							    framelen);
-+					TS0710_DEBUGHEX(start_flag, framelen);
-+
-+					short_pkt =
-+					    (short_frame *) (start_flag +
-+							     ADDRESS_FIELD_OFFSET);
-+					if ((short_pkt->h.length.ea) == 0) {
-+						long_pkt =
-+						    (long_frame *) (start_flag +
-+								    ADDRESS_FIELD_OFFSET);
-+						uih_len =
-+						    GET_LONG_LENGTH(long_pkt->h.
-+								    length);
-+						uih_data_start =
-+						    long_pkt->h.data;
-+
-+						crc_error =
-+						    crc_check((__u8
-+							       *) (start_flag +
-+								   SLIDE_BP_SEQ_OFFSET),
-+							      LONG_CRC_CHECK +
-+							      1,
-+							      *(uih_data_start +
-+								uih_len));
-+					} else {
-+						uih_len =
-+						    short_pkt->h.length.len;
-+						uih_data_start =
-+						    short_pkt->data;
-+
-+						crc_error =
-+						    crc_check((__u8
-+							       *) (start_flag +
-+								   SLIDE_BP_SEQ_OFFSET),
-+							      SHORT_CRC_CHECK +
-+							      1,
-+							      *(uih_data_start +
-+								uih_len));
-+					}
-+
-+					if (!crc_error) {
-+						if (expect_seq ==
-+						    *(start_flag +
-+						      SLIDE_BP_SEQ_OFFSET)) {
-+							expect_seq++;
-+							if (expect_seq >= 4) {
-+								expect_seq = 0;
-+							}
-+#ifdef TS0710SEQ2
-+							send_ack
-+							    (&ts0710_connection,
-+							     expect_seq,
-+							     *(start_flag +
-+							       FIRST_BP_SEQ_OFFSET),
-+							     *(start_flag +
-+							       SECOND_BP_SEQ_OFFSET));
-+#else
-+							send_ack
-+							    (&ts0710_connection,
-+							     expect_seq);
-+#endif
-+
-+							ts0710_recv_data
-+							    (&ts0710_connection,
-+							     start_flag +
-+							     ADDRESS_FIELD_OFFSET,
-+							     framelen - 2 -
-+							     SEQ_FIELD_SIZE);
-+						} else {
-+
-+#ifdef TS0710DEBUG
-+							if (*
-+							    (start_flag +
-+							     SLIDE_BP_SEQ_OFFSET)
-+							    != 0x9F) {
-+#endif
-+
-+								TS0710_LOG
-+								    ("MUX sequence number %d is not expected %d, discard data!\n",
-+								     *
-+								     (start_flag
-+								      +
-+								      SLIDE_BP_SEQ_OFFSET),
-+								     expect_seq);
-+
-+#ifdef TS0710SEQ2
-+								send_ack
-+								    (&ts0710_connection,
-+								     expect_seq,
-+								     *
-+								     (start_flag
-+								      +
-+								      FIRST_BP_SEQ_OFFSET),
-+								     *
-+								     (start_flag
-+								      +
-+								      SECOND_BP_SEQ_OFFSET));
-+#else
-+								send_ack
-+								    (&ts0710_connection,
-+								     expect_seq);
-+#endif
-+
-+#ifdef TS0710DEBUG
-+							} else {
-+								*(uih_data_start
-+								  + uih_len) =
-+						     0;
-+								TS0710_PRINTK
-+								    ("MUX bp log: %s\n",
-+								     uih_data_start);
-+							}
-+#endif
-+
-+						}
-+					} else {	/* crc_error */
-+						search = start_flag + 1;
-+						start_flag = 0;
-+						framelen = -1;
-+						continue;
-+					}	/*End if(!crc_error) */
-+
-+					/*For BP UART problem End */
-+
-+/*For BP UART problem
-+          TS0710_LOGSTR_FRAME(0, start_flag, framelen);
-+          TS0710_DEBUGHEX(start_flag, framelen);
-+	  ts0710_recv_data(&ts0710_connection, start_flag + 1, framelen - 2);
-+*/
-+					search = start_flag + framelen;
-+				} else {
-+					TS0710_LOGSTR_FRAME(0, start_flag,
-+							    framelen);
-+					TS0710_DEBUGHEX(start_flag, framelen);
-+					TS0710_PRINTK
-+					    ("MUX: Lost synchronization!\n");
-+					search = start_flag + 1;
-+				}
-+
-+				start_flag = 0;
-+				framelen = -1;
-+				continue;
-+			}
-+
-+			if (start_flag != &tbuf[0]) {
-+				to = tbuf;
-+				from = start_flag;
-+				count = tbuf_ptr - start_flag;
-+				while (count--) {
-+					*to++ = *from++;
-+				}
-+
-+				tbuf_ptr -= (start_flag - tbuf);
-+				start_flag = tbuf;
-+			}
-+			break;
-+		}		/* End Frame Start Flag found */
-+	}			/* End while(1) */
-+
-+	clear_bit(RECV_RUNNING, &mux_recv_flags);
-+}
-+
-+static void post_recv_worker(void *private_)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	int tty_idx;
-+	struct tty_struct *tty;
-+	__u8 post_recv;
-+	__u8 flow_control;
-+	__u8 dlci;
-+	mux_recv_struct *recv_info, *recv_info2, *post_recv_q;
-+	int recv_room;
-+	mux_recv_packet *recv_packet, *recv_packet2;
-+	__u8 j;
-+
-+	UNUSED_PARAM(private_);
-+
-+	if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
-+		schedule_work(&post_recv_tqueue);
-+		return;
-+	}
-+
-+	TS0710_DEBUG("Enter into post_recv_worker");
-+
-+	post_recv = 0;
-+	if (!mux_recv_queue) {
-+		goto out;
-+	}
-+
-+	post_recv_q = NULL;
-+	recv_info2 = mux_recv_queue;
-+	while ((recv_info = recv_info2)) {
-+		recv_info2 = recv_info->next;
-+
-+		if (!(recv_info->total)) {
-+			TS0710_PRINTK
-+			    ("MUX Error: %s: Should not get here, recv_info->total == 0 \n",
-+			     __FUNCTION__);
-+			continue;
-+		}
-+
-+		tty_idx = recv_info->no_tty;
-+		dlci = tty2dlci[tty_idx];
-+		tty = mux_table[tty_idx];
-+		if ((!mux_tty[tty_idx]) || (!tty)) {
-+			TS0710_PRINTK
-+			    ("MUX: No application waiting for, free recv_info! tty_idx:%d\n",
-+			     tty_idx);
-+			mux_recv_info_flags[tty_idx] = 0;
-+			free_mux_recv_struct(mux_recv_info[tty_idx]);
-+			mux_recv_info[tty_idx] = 0;
-+			ts0710_flow_on(dlci, ts0710);
-+			continue;
-+		}
-+
-+		TS0710_DEBUG("/dev/mux%d recv_info->total is: %d", tty_idx,
-+			     recv_info->total);
-+
-+		if (test_bit(TTY_THROTTLED, &tty->flags)) {
-+			add_post_recv_queue(&post_recv_q, recv_info);
-+			continue;
-+		} else if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
-+			post_recv = 1;
-+			add_post_recv_queue(&post_recv_q, recv_info);
-+			continue;
-+		}
-+
-+		flow_control = 0;
-+		recv_packet2 = recv_info->mux_packet;
-+		while (recv_info->total) {
-+			recv_room = 65535;
-+			if (tty->receive_room)
-+				recv_room = tty->receive_room;
-+
-+			if (recv_info->length) {
-+				if (recv_room < recv_info->length) {
-+					flow_control = 1;
-+					break;
-+				}
-+
-+				/* Put queued data into read buffer of tty */
-+				TS0710_DEBUG
-+				    ("Put queued recv data into read buffer of /dev/mux%d",
-+				     tty_idx);
-+				TS0710_DEBUGHEX(recv_info->data,
-+						recv_info->length);
-+				(tty->ldisc.receive_buf) (tty, recv_info->data,
-+							  NULL,
-+							  recv_info->length);
-+				recv_info->total -= recv_info->length;
-+				recv_info->length = 0;
-+			} else {	/* recv_info->length == 0 */
-+				if ((recv_packet = recv_packet2)) {
-+					recv_packet2 = recv_packet->next;
-+
-+					if (recv_room < recv_packet->length) {
-+						flow_control = 1;
-+						recv_info->mux_packet =
-+						    recv_packet;
-+						break;
-+					}
-+
-+					/* Put queued data into read buffer of tty */
-+					TS0710_DEBUG
-+					    ("Put queued recv data into read buffer of /dev/mux%d",
-+					     tty_idx);
-+					TS0710_DEBUGHEX(recv_packet->data,
-+							recv_packet->length);
-+					(tty->ldisc.receive_buf) (tty,
-+								  recv_packet->
-+								  data, NULL,
-+								  recv_packet->
-+								  length);
-+					recv_info->total -= recv_packet->length;
-+					free_mux_recv_packet(recv_packet);
-+				} else {
-+					TS0710_PRINTK
-+					    ("MUX Error: %s: Should not get here, recv_info->total is:%u \n",
-+					     __FUNCTION__, recv_info->total);
-+				}
-+			}	/* End recv_info->length == 0 */
-+		}		/* End while( recv_info->total ) */
-+
-+		if (!(recv_info->total)) {
-+			/* Important clear */
-+			recv_info->mux_packet = 0;
-+
-+			if (recv_info->post_unthrottle) {
-+				/* Do something for post_unthrottle */
-+				ts0710_flow_on(dlci, ts0710);
-+				recv_info->post_unthrottle = 0;
-+			}
-+		} else {
-+			add_post_recv_queue(&post_recv_q, recv_info);
-+
-+			if (flow_control) {
-+				/* Do something for flow control */
-+				if (recv_info->post_unthrottle) {
-+					set_bit(TTY_THROTTLED, &tty->flags);
-+					recv_info->post_unthrottle = 0;
-+				} else {
-+					ts0710_flow_off(tty, dlci, ts0710);
-+				}
-+			}	/* End if( flow_control ) */
-+		}
-+	}			/* End while( (recv_info = recv_info2) ) */
-+
-+	mux_recv_queue = post_recv_q;
-+
-+      out:
-+	if (post_recv_count_flag) {
-+		post_recv_count_flag = 0;
-+		for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) {
-+			if (mux_data_count2[j] > 0) {
-+				if (add_count(j, mux_data_count2[j]) == 0) {
-+					mux_data_count2[j] = 0;
-+				} else {
-+					post_recv_count_flag = 1;
-+					post_recv = 1;
-+				}
-+			}
-+		}		/* End for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) */
-+	}
-+	/* End if( post_recv_count_flag ) */
-+	if (post_recv)
-+		schedule_work(&post_recv_tqueue);
-+	clear_bit(RECV_RUNNING, &mux_recv_flags);
-+}
-+
-+/* mux sender, call from serial.c transmit_chars() */
-+void mux_sender(void)
-+{
-+	mux_send_struct *send_info;
-+	int chars;
-+	__u8 idx;
-+
-+	chars = mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY);
-+	if (!chars) {
-+		/* chars == 0 */
-+		TS0710_LOG("<[]\n");
-+		mux_sched_send();
-+		return;
-+	}
-+
-+	idx = mux_send_info_idx;
-+	if ((idx < NR_MUXS) && (mux_send_info_flags[idx])) {
-+		send_info = mux_send_info[idx];
-+		if ((send_info)
-+		    && (send_info->filled)
-+		    && (send_info->length <=
-+			(TS0710MUX_SERIAL_BUF_SIZE - chars))) {
-+
-+			mux_sched_send();
-+		}
-+	}
-+}
-+
-+static void send_worker(void *private_)
-+{
-+	ts0710_con *ts0710 = &ts0710_connection;
-+	__u8 j;
-+	mux_send_struct *send_info;
-+	int chars;
-+	struct tty_struct *tty;
-+	__u8 dlci;
-+
-+	UNUSED_PARAM(private_);
-+
-+	TS0710_DEBUG("Enter into send_worker");
-+
-+	mux_send_info_idx = NR_MUXS;
-+
-+	if (ts0710->dlci[0].state == FLOW_STOPPED) {
-+		TS0710_DEBUG("Flow stopped on all channels\n");
-+		return;
-+	}
-+
-+	for (j = 0; j < NR_MUXS; j++) {
-+
-+		if (!(mux_send_info_flags[j])) {
-+			continue;
-+		}
-+
-+		send_info = mux_send_info[j];
-+		if (!send_info) {
-+			continue;
-+		}
-+
-+		if (!(send_info->filled)) {
-+			continue;
-+		}
-+
-+		dlci = tty2dlci[j];
-+		if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
-+			TS0710_DEBUG("Flow stopped on channel DLCI: %d\n",
-+				     dlci);
-+			continue;
-+		} else if (ts0710->dlci[dlci].state != CONNECTED) {
-+			TS0710_DEBUG("DLCI %d not connected\n", dlci);
-+			send_info->filled = 0;
-+			continue;
-+		}
-+
-+		chars = mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY);
-+		if (send_info->length <= (TS0710MUX_SERIAL_BUF_SIZE - chars)) {
-+			TS0710_DEBUG("Send queued UIH for /dev/mux%d", j);
-+			basic_write(ts0710, (__u8 *) send_info->frame,
-+				    send_info->length);
-+			send_info->length = 0;
-+			send_info->filled = 0;
-+		} else {
-+			mux_send_info_idx = j;
-+			break;
-+		}
-+	}			/* End for() loop */
-+
-+	/* Queue UIH data to be transmitted */
-+	for (j = 0; j < NR_MUXS; j++) {
-+
-+		if (!(mux_send_info_flags[j])) {
-+			continue;
-+		}
-+
-+		send_info = mux_send_info[j];
-+		if (!send_info) {
-+			continue;
-+		}
-+
-+		if (send_info->filled) {
-+			continue;
-+		}
-+
-+		/* Now queue UIH data to send_info->buf */
-+
-+		if (!mux_tty[j]) {
-+			continue;
-+		}
-+
-+		tty = mux_table[j];
-+		if (!tty) {
-+			continue;
-+		}
-+
-+		dlci = tty2dlci[j];
-+		if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
-+			TS0710_DEBUG("Flow stopped on channel DLCI: %d\n",
-+				     dlci);
-+			continue;
-+		} else if (ts0710->dlci[dlci].state != CONNECTED) {
-+			TS0710_DEBUG("DLCI %d not connected\n", dlci);
-+			continue;
-+		}
-+
-+		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
-+		    && tty->ldisc.write_wakeup) {
-+			(tty->ldisc.write_wakeup) (tty);
-+		}
-+		wake_up_interruptible(&tty->write_wait);
-+
-+#ifdef SERIAL_HAVE_POLL_WAIT
-+		wake_up_interruptible(&tty->poll_wait);
-+#endif
-+
-+		if (send_info->filled) {
-+			if (j < mux_send_info_idx) {
-+				mux_send_info_idx = j;
-+			}
-+		}
-+	}			/* End for() loop */
-+}
-+
-+static int get_count(__u8 idx)
-+{
-+	int ret;
-+
-+	if (idx > TS0710MUX_COUNT_MAX_IDX) {
-+		TS0710_PRINTK("MUX get_count: invalid idx: %d!\n", idx);
-+		return -1;
-+	}
-+
-+	down(&mux_data_count_mutex[idx]);
-+	ret = mux_data_count[idx];
-+	up(&mux_data_count_mutex[idx]);
-+
-+	return ret;
-+}
-+
-+static int set_count(__u8 idx, int count)
-+{
-+	if (idx > TS0710MUX_COUNT_MAX_IDX) {
-+		TS0710_PRINTK("MUX set_count: invalid idx: %d!\n", idx);
-+		return -1;
-+	}
-+	if (count < 0) {
-+		TS0710_PRINTK("MUX set_count: invalid count: %d!\n", count);
-+		return -1;
-+	}
-+
-+	down(&mux_data_count_mutex[idx]);
-+	mux_data_count[idx] = count;
-+	up(&mux_data_count_mutex[idx]);
-+
-+	return 0;
-+}
-+
-+static int add_count(__u8 idx, int count)
-+{
-+	if (idx > TS0710MUX_COUNT_MAX_IDX) {
-+		TS0710_PRINTK("MUX add_count: invalid idx: %d!\n", idx);
-+		return -1;
-+	}
-+	if (count <= 0) {
-+		TS0710_PRINTK("MUX add_count: invalid count: %d!\n", count);
-+		return -1;
-+	}
-+
-+	if (down_trylock(&mux_data_count_mutex[idx]))
-+		return -1;
-+	mux_data_count[idx] += count;
-+	up(&mux_data_count_mutex[idx]);
-+
-+	return 0;
-+}
-+
-+ssize_t file_proc_read(struct file * file, char *buf, size_t size,
-+		       loff_t * ppos)
-+{
-+	gprs_bytes gprsData[TS0710MUX_GPRS_SESSION_MAX];
-+	int bufLen = sizeof(gprs_bytes) * TS0710MUX_GPRS_SESSION_MAX;
-+
-+	UNUSED_PARAM(file);
-+	UNUSED_PARAM(size);
-+	UNUSED_PARAM(ppos);
-+
-+	gprsData[0].recvBytes = get_count(TS0710MUX_GPRS1_RECV_COUNT_IDX);
-+	gprsData[0].sentBytes = get_count(TS0710MUX_GPRS1_SEND_COUNT_IDX);
-+	gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].recvBytes =
-+	    get_count(TS0710MUX_GPRS2_RECV_COUNT_IDX);
-+	gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes =
-+	    get_count(TS0710MUX_GPRS2_SEND_COUNT_IDX);
-+
-+	copy_to_user(buf, gprsData, bufLen);
-+
-+	return bufLen;
-+}
-+
-+ssize_t file_proc_write(struct file * file, const char *buf, size_t count,
-+			loff_t * ppos)
-+{
-+	gprs_bytes gprsData[TS0710MUX_GPRS_SESSION_MAX];
-+	int bufLen = sizeof(gprs_bytes) * TS0710MUX_GPRS_SESSION_MAX;
-+
-+	UNUSED_PARAM(file);
-+	UNUSED_PARAM(count);
-+	UNUSED_PARAM(ppos);
-+
-+	memset(gprsData, 0, bufLen);
-+
-+	copy_from_user(gprsData, buf, bufLen);
-+
-+	set_count(TS0710MUX_GPRS1_RECV_COUNT_IDX, gprsData[0].recvBytes);
-+	set_count(TS0710MUX_GPRS1_SEND_COUNT_IDX, gprsData[0].sentBytes);
-+	set_count(TS0710MUX_GPRS2_RECV_COUNT_IDX,
-+		  gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].recvBytes);
-+	set_count(TS0710MUX_GPRS2_SEND_COUNT_IDX,
-+		  gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes);
-+
-+	return bufLen;
-+}
-+
-+static void gprs_proc_init(void)
-+{
-+	gprs_proc_file =
-+	    create_proc_entry("gprsbytes", S_IRUSR | S_IWUSR, NULL);
-+	gprs_proc_file->proc_fops = &file_proc_operations;
-+}
-+
-+static void gprs_proc_exit(void)
-+{
-+	remove_proc_entry("gprsbytes", gprs_proc_file);
-+}
-+
-+static int __init mux_init(void)
-+{
-+	__u8 j;
-+
-+	if (COMM_FOR_MUX_DRIVER == NULL) {
-+
-+#ifdef USB_FOR_MUX
-+		panic("please install IPC-USB first\n");
-+#else
-+		panic("please install ttyS0 first\n");
-+#endif
-+
-+	}
-+
-+	ts0710_init();
-+
-+	for (j = 0; j < NR_MUXS; j++) {
-+		mux_send_info_flags[j] = 0;
-+		mux_send_info[j] = 0;
-+		mux_recv_info_flags[j] = 0;
-+		mux_recv_info[j] = 0;
-+	}
-+	mux_send_info_idx = NR_MUXS;
-+	mux_recv_queue = NULL;
-+	mux_recv_flags = 0;
-+
-+	for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) {
-+		mux_data_count[j] = 0;
-+		mux_data_count2[j] = 0;
-+		init_MUTEX(&mux_data_count_mutex[j]);
-+	}
-+	post_recv_count_flag = 0;
-+
-+	INIT_WORK(&send_tqueue, send_worker, NULL);
-+	INIT_WORK(&receive_tqueue, receive_worker, NULL);
-+	INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL);
-+
-+	memset(&mux_driver, 0, sizeof(struct tty_driver));
-+	memset(&mux_tty, 0, sizeof(mux_tty));
-+	mux_driver.magic = TTY_DRIVER_MAGIC;
-+	mux_driver.driver_name = "ts0710mux";
-+	mux_driver.name = "ts0710mux";
-+	mux_driver.major = TS0710MUX_MAJOR;
-+	mux_driver.minor_start = TS0710MUX_MINOR_START;
-+	mux_driver.num = NR_MUXS;
-+	mux_driver.type = TTY_DRIVER_TYPE_SERIAL;
-+	mux_driver.subtype = SERIAL_TYPE_NORMAL;
-+	mux_driver.init_termios = tty_std_termios;
-+	mux_driver.init_termios.c_iflag = 0;
-+	mux_driver.init_termios.c_oflag = 0;
-+	mux_driver.init_termios.c_cflag = B38400 | CS8 | CREAD;
-+	mux_driver.init_termios.c_lflag = 0;
-+	mux_driver.flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
-+
-+	mux_driver.ttys = mux_table;
-+	mux_driver.termios = mux_termios;
-+	mux_driver.termios_locked = mux_termios_locked;
-+//  mux_driver.driver_state = mux_state;
-+	mux_driver.other = NULL;
-+
-+	mux_driver.open = mux_open;
-+	mux_driver.close = mux_close;
-+	mux_driver.write = mux_write;
-+	mux_driver.write_room = mux_write_room;
-+	mux_driver.flush_buffer = mux_flush_buffer;
-+	mux_driver.chars_in_buffer = mux_chars_in_buffer;
-+	mux_driver.throttle = mux_throttle;
-+	mux_driver.unthrottle = mux_unthrottle;
-+	mux_driver.ioctl = mux_ioctl;
-+	mux_driver.owner = THIS_MODULE;
-+
-+	if (tty_register_driver(&mux_driver))
-+		panic("Couldn't register mux driver");
-+
-+	COMM_MUX_DISPATCHER = mux_dispatcher;
-+	COMM_MUX_SENDER = mux_sender;
-+
-+	gprs_proc_init();
-+
-+	return 0;
-+}
-+
-+static void __exit mux_exit(void)
-+{
-+	__u8 j;
-+
-+	COMM_MUX_DISPATCHER = NULL;
-+	COMM_MUX_SENDER = NULL;
-+
-+	gprs_proc_exit();
-+
-+	mux_send_info_idx = NR_MUXS;
-+	mux_recv_queue = NULL;
-+	for (j = 0; j < NR_MUXS; j++) {
-+		if ((mux_send_info_flags[j]) && (mux_send_info[j])) {
-+			kfree(mux_send_info[j]);
-+		}
-+		mux_send_info_flags[j] = 0;
-+		mux_send_info[j] = 0;
-+
-+		if ((mux_recv_info_flags[j]) && (mux_recv_info[j])) {
-+			free_mux_recv_struct(mux_recv_info[j]);
-+		}
-+		mux_recv_info_flags[j] = 0;
-+		mux_recv_info[j] = 0;
-+	}
-+
-+	if (tty_unregister_driver(&mux_driver))
-+		panic("Couldn't unregister mux driver");
-+}
-+
-+module_init(mux_init);
-+module_exit(mux_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte <laforge@openezx.org>");
-+MODULE_DESCRIPTION("TS 07.10 Multiplexer");
-Index: linux-2.6.21/drivers/char/ts0710_mux.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/char/ts0710_mux.h	2007-05-06 17:10:21.000000000 -0300
-@@ -0,0 +1,103 @@
-+/*
-+ * mux_macro.h
-+ *
-+ * Copyright (C) 2002 2005 Motorola
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ *  11/18/2002  (Motorola) - Initial version
-+ *
-+ */
-+
-+/*
-+* This header file should be included by both MUX and other applications
-+* which access MUX device files. It gives the additional macro definitions
-+* shared between MUX and applications.
-+*/
-+
-+/* MUX DLCI(Data Link Connection Identifier) Configuration */
-+/*
-+*  DLCI     Service
-+*   0    Control Channel
-+*   1    Voice Call & Network-related
-+*   2    SMS MO
-+*   3    SMS MT
-+*   4    Phonebook & related
-+*   5    MISC
-+*   6    CSD/FAX
-+*   7    GPRS1
-+*   8    GPRS2
-+*   9    Logger CMD
-+*   10   Logger Data
-+*   11   Test CMD
-+*   12   AGPS
-+*   13   Net Monitor
-+*/
-+
-+/* Mapping between DLCI and MUX device files */
-+/*
-+*   File Name   Minor  DLCI  AT Command/Data
-+*   /dev/mux0     0     1     AT Command
-+*   /dev/mux1     1     2     AT Command
-+*   /dev/mux2     2     3     AT Command
-+*   /dev/mux3     3     4     AT Command
-+*   /dev/mux4     4     5     AT Command
-+*   /dev/mux5     5     6     AT Command
-+*   /dev/mux6     6     7     AT Command
-+*   /dev/mux7     7     8     AT Command
-+*   /dev/mux8     8     6     Data
-+*   /dev/mux9     9     7     Data
-+*   /dev/mux10    10    8     Data
-+*   /dev/mux11    11    9     Data
-+*   /dev/mux12    12    10    Data
-+*   /dev/mux13    13    11    Data
-+*   /dev/mux14    14    12    Data
-+*   /dev/mux15    15    13    Data
-+*/
-+
-+#define MUX_CMD_FILE_VOICE_CALL   "/dev/mux0"
-+#define MUX_CMD_FILE_SMS_MO       "/dev/mux1"
-+#define MUX_CMD_FILE_SMS_MT       "/dev/mux2"
-+#define MUX_CMD_FILE_PHONEBOOK    "/dev/mux3"
-+#define MUX_CMD_FILE_MISC         "/dev/mux4"
-+#define MUX_CMD_FILE_CSD          "/dev/mux5"
-+#define MUX_CMD_FILE_GPRS1        "/dev/mux6"
-+#define MUX_CMD_FILE_GPRS2        "/dev/mux7"
-+
-+#define MUX_DATA_FILE_CSD         "/dev/mux8"
-+#define MUX_DATA_FILE_GPRS1       "/dev/mux9"
-+#define MUX_DATA_FILE_GPRS2       "/dev/mux10"
-+#define MUX_DATA_FILE_LOGGER_CMD  "/dev/mux11"
-+#define MUX_DATA_FILE_LOGGER_DATA "/dev/mux12"
-+#define MUX_DATA_FILE_TEST_CMD    "/dev/mux13"
-+#define MUX_DATA_FILE_AGPS        "/dev/mux14"
-+#define MUX_DATA_FILE_NET_MONITOR "/dev/mux15"
-+
-+#define NUM_MUX_CMD_FILES 8
-+#define NUM_MUX_DATA_FILES 8
-+#define NUM_MUX_FILES ( NUM_MUX_CMD_FILES  +  NUM_MUX_DATA_FILES )
-+
-+/* Special ioctl() upon a MUX device file for hanging up a call */
-+#define TS0710MUX_IO_MSC_HANGUP 0x54F0
-+
-+/* Special ioctl() upon a MUX device file for MUX loopback test */
-+#define TS0710MUX_IO_TEST_CMD 0x54F1
-+
-+/* Special Error code might be return from write() to a MUX device file  */
-+#define EDISCONNECTED 900	/* Logical data link is disconnected */
-+
-+/* Special Error code might be return from open() to a MUX device file  */
-+#define EREJECTED 901		/* Logical data link connection request is rejected */
-Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/char/ts0710_mux_usb.c	2007-05-06 17:10:21.000000000 -0300
-@@ -0,0 +1,868 @@
-+/*
-+ * linux/drivers/usb/ipcusb.c
-+ *
-+ * Implementation of a ipc driver based Intel's Bulverde USB Host
-+ * Controller.
-+ *
-+ * Copyright (C) 2003-2005 Motorola
-+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  2003-Nov-03 - (Motorola) created
-+ *  2004-Feb-20 - (Motorola) Add Power Manager codes
-+ *  2004-Apr-14 - (Motorola) Update Suspend/Resume codes
-+ *  2004-May-10 - (Motorola) Add unlink_urbs codes and do some updates of send
-+ *			     out urb sequence
-+ *  2006-Jun-22 - (Harald Welte) port to Linux 2.6.x
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/errno.h>
-+#include <asm/uaccess.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch-pxa/pxa-regs.h>
-+#include <asm/arch-pxa/ezx.h>
-+#include <linux/slab.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/tty.h>
-+#include <linux/tty_driver.h>
-+#include <linux/tty_flip.h>
-+#include <linux/circ_buf.h>
-+#include <linux/usb.h>
-+
-+#include "ts0710_mux_usb.h"
-+
-+/*Macro defined for this driver*/
-+#define DRIVER_VERSION "1.0alpha1"
-+#define DRIVER_AUTHOR "Motorola / Harald Welte <laforge@openezx.org>"
-+#define DRIVER_DESC "USB IPC Driver (TS07.10 lowlevel)"
-+#define MOTO_IPC_VID		0x22b8
-+#define MOTO_IPC_PID		0x3006
-+#define IBUF_SIZE 		32		/*urb size*/
-+#define IPC_USB_XMIT_SIZE	1024
-+#define IPC_URB_SIZE		32
-+#define IPC_USB_WRITE_INIT 	0
-+#define IPC_USB_WRITE_XMIT	1
-+#define IPC_USB_PROBE_READY	3
-+#define IPC_USB_PROBE_NOT_READY	4
-+#define DBG_MAX_BUF_SIZE	1024
-+#define ICL_EVENT_INTERVAL	(HZ)
-+#undef BVD_DEBUG
-+
-+#define IS_EP_BULK(ep)  ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0)
-+#define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
-+#define IS_EP_BULK_OUT(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
-+/*End defined macro*/
-+
-+/*global values defined*/
-+static struct usb_driver 		usb_ipc_driver;
-+static struct timer_list 		ipcusb_timer;
-+static struct timer_list 		suspend_timer;
-+static struct timer_list 		wakeup_timer;
-+static struct tty_struct		ipcusb_tty;		/* the coresponding tty struct, we just use flip buffer here. */
-+static struct tty_driver		ipcusb_tty_driver;	/* the coresponding tty driver, we just use write and chars in buff here*/
-+struct tty_driver *usb_for_mux_driver = NULL;
-+struct tty_struct *usb_for_mux_tty = NULL;
-+void (*usb_mux_dispatcher)(struct tty_struct *tty) = NULL;
-+void (*usb_mux_sender)(void) = NULL;
-+void (*ipcusb_ap_to_bp)(unsigned char*, int) = NULL;
-+void (*ipcusb_bp_to_ap)(unsigned char*, int) = NULL;
-+EXPORT_SYMBOL(usb_for_mux_driver);
-+EXPORT_SYMBOL(usb_for_mux_tty);
-+EXPORT_SYMBOL(usb_mux_dispatcher);
-+EXPORT_SYMBOL(usb_mux_sender);
-+EXPORT_SYMBOL(ipcusb_ap_to_bp);
-+EXPORT_SYMBOL(ipcusb_bp_to_ap);
-+static int sumbit_times = 0;
-+static int callback_times = 0;
-+//static unsigned long last_jiff = 0;
-+extern int usbh_finished_resume;
-+/*end global values defined*/
-+
-+MODULE_AUTHOR(DRIVER_AUTHOR);
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_LICENSE("GPL");
-+
-+#ifdef BVD_DEBUG
-+#define bvd_dbg(format, arg...) printk(__FILE__ ": " format "\n" , ## arg)
-+#else
-+#define bvd_dbg(format, arg...) do {} while (0)
-+#endif
-+
-+/* USB device context */
-+typedef struct {
-+	struct list_head list;
-+	int size;
-+	char *body;
-+} buf_list_t;
-+
-+struct ipc_usb_data {
-+	u_int8_t 		write_finished_flag;
-+	u_int8_t		write_flag,
-+				ipc_flag,
-+				suspend_flag;
-+	struct usb_device 	*ipc_dev;
-+	struct urb 		readurb_mux,
-+				writeurb_mux,
-+				writeurb_dsplog;
-+	char 			*obuf, *ibuf;
-+	int			writesize;	/* max packet size for the
-+						   output bulk endpoint *
-+						   transfer buffers */
-+
-+	struct circ_buf		xmit;		/* write cric bufffer */
-+  	struct list_head 	in_buf_list;
-+	char 			bulk_in_ep_mux,
-+				bulk_out_ep_mux,
-+				bulk_in_ep_dsplog;
-+	unsigned int 		ifnum;
-+
-+	struct tasklet_struct	bh,
-+				bh_bp;
-+
-+	spinlock_t		lock;
-+};
-+
-+struct ipc_usb_data *bvd_ipc;
-+
-+#ifdef BVD_DEBUG
-+static void bvd_dbg_hex(__u8 *buf, int len)
-+{
-+	static unsigned char tbuf[DBG_MAX_BUF_SIZE];
-+	int i, c;
-+
-+	if (len <= 0)
-+		return;
-+
-+	c = 0;
-+	for (i=0; (i < len) && (c < (DBG_MAX_BUF_SIZE - 3)); i++) {
-+		sprintf(&tbuf[c], "%02x ",buf[i]);
-+		c += 3;
-+	}
-+	tbuf[c] = 0;
-+
-+	printk("%s: %s\n", __FUNCTION__, tbuf);
-+}
-+#else
-+#define bvd_dbg_hex(buf, len)
-+#endif
-+
-+static int unlink_urbs(struct urb *urb)
-+{
-+	unsigned long flags;
-+	int retval;
-+
-+	spin_lock_irqsave(&bvd_ipc->lock, flags);
-+
-+	retval = usb_unlink_urb(urb);
-+	if (retval != -EINPROGRESS && retval != 0)
-+		printk("unlink urb err, %d", retval);
-+
-+	spin_unlock_irqrestore(&bvd_ipc->lock, flags);
-+	return retval;
-+}
-+
-+static void append_to_inbuf_list(struct urb *urb)
-+{
-+	buf_list_t *inbuf;
-+	int count = urb->actual_length;
-+
-+	inbuf = kmalloc(sizeof(buf_list_t), GFP_KERNEL);
-+	if (!inbuf) {
-+		printk("append_to_inbuf_list: (%d) out of memory!\n",
-+			sizeof(buf_list_t));
-+		return;
-+	}
-+
-+	inbuf->size = count;
-+	inbuf->body = kmalloc(sizeof(char)*count, GFP_KERNEL);
-+	if (!inbuf->body) {
-+		kfree(inbuf);
-+		printk("append_to_inbuf_list: (%d) out of memory!\n",
-+			sizeof(char)*count);
-+		return;
-+	}
-+	memcpy(inbuf->body, (unsigned char*)urb->transfer_buffer, count);
-+	list_add_tail(&inbuf->list, &bvd_ipc->in_buf_list);
-+}
-+
-+static void ipcusb_timeout(unsigned long data)
-+{
-+	struct tty_struct *tty = &ipcusb_tty;
-+	struct urb *urb = (struct urb *)data;
-+
-+	bvd_dbg("ipcusb_timeout***");
-+
-+	while (!(list_empty(&bvd_ipc->in_buf_list))) {
-+		int count;
-+		buf_list_t *inbuf;
-+		struct list_head *ptr = NULL;
-+
-+		ptr = bvd_ipc->in_buf_list.next;
-+		inbuf = list_entry (ptr, buf_list_t, list);
-+		count = inbuf->size;
-+		if (tty_insert_flip_string(tty, inbuf->body, count) >= count) {
-+			list_del(ptr);
-+			kfree(inbuf->body);
-+			inbuf->body = NULL;
-+			kfree(inbuf);
-+		} else {
-+			bvd_dbg("ipcusb_timeout: bvd_ipc->in_buf_list empty!");
-+			break;
-+		}
-+	}
-+
-+	if (usb_mux_dispatcher)
-+		usb_mux_dispatcher(tty);	/**call Liu changhui's func.**/
-+
-+	if (list_empty(&bvd_ipc->in_buf_list)) {
-+		urb->actual_length = 0;
-+		urb->dev = bvd_ipc->ipc_dev;
-+		if (usb_submit_urb(urb, GFP_ATOMIC))
-+			bvd_dbg("ipcusb_timeout: failed resubmitting read urb");
-+		bvd_dbg("ipcusb_timeout: resubmited read urb");
-+	} else {
-+		ipcusb_timer.data = (unsigned long)urb;
-+		mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
-+	}
-+}
-+
-+static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs)
-+{
-+	buf_list_t *inbuf;
-+	int count = urb->actual_length;
-+	struct tty_struct *tty = &ipcusb_tty;
-+
-+ 	bvd_dbg("usb_ipc_read_bulk: begining!");
-+	if (urb->status)
-+		printk("nonzero read bulk status received: %d\n", urb->status);
-+
-+ 	bvd_dbg("usb_ipc_read_bulk: urb->actual_length=%d", urb->actual_length);
-+ 	bvd_dbg("usb_ipc_read_bulk: urb->transfer_buffer:");
-+
-+	bvd_dbg_hex((unsigned char*)urb->transfer_buffer, urb->actual_length);
-+
-+	if (count > 0 && ((*ipcusb_bp_to_ap) != NULL))
-+		(*ipcusb_bp_to_ap)(urb->transfer_buffer, urb->actual_length);
-+
-+ 	if (!(list_empty(&bvd_ipc->in_buf_list))) {
-+		int need_mux = 0;
-+
-+ 		bvd_dbg("usb_ipc_read_bulk: some urbs in_buf_list");
-+		if (count > 0) {
-+			bvd_ipc->suspend_flag = 1;
-+			append_to_inbuf_list(urb); /* append the current received urb */
-+#if 0
-+			if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
-+			{
-+				last_jiff = jiffies;
-+				queue_apm_event(KRNL_ICL, NULL);
-+			}
-+#endif
-+		}
-+
-+		while (!(list_empty(&bvd_ipc->in_buf_list))) {
-+			struct list_head* ptr = NULL;
-+			ptr = bvd_ipc->in_buf_list.next;
-+			inbuf = list_entry(ptr, buf_list_t, list);
-+			count = inbuf->size;
-+			need_mux = 1;
-+
-+			tty_insert_flip_string(tty, inbuf->body, count);
-+
-+			list_del(ptr);
-+			kfree(inbuf->body);
-+			inbuf->body = NULL;
-+			kfree(inbuf);
-+		}
-+
-+		if (usb_mux_dispatcher && need_mux)
-+			usb_mux_dispatcher(tty); /* call Liu changhui's func. */
-+
-+		if (list_empty(&bvd_ipc->in_buf_list)) {
-+			urb->actual_length = 0;
-+			urb->dev = bvd_ipc->ipc_dev;
-+			if (usb_submit_urb(urb, GFP_ATOMIC))
-+				bvd_dbg("usb_ipc_read_bulk: "
-+					"failed resubmitting read urb");
-+			bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
-+		} else {
-+			ipcusb_timer.data = (unsigned long)urb;
-+			mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
-+		}
-+	} else if (count > 0) {
-+ 		bvd_dbg("usb_ipc_read_bulk: no urbs in_buf_list");
-+		bvd_ipc->suspend_flag = 1;
-+
-+		if (tty_insert_flip_string(tty, urb->transfer_buffer,
-+					   count) < count) {
-+			bvd_ipc->suspend_flag = 1;
-+			append_to_inbuf_list(urb);
-+			ipcusb_timer.data = (unsigned long)urb;
-+			mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
-+#if 0
-+			if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
-+			{
-+				last_jiff = jiffies;
-+				queue_apm_event(KRNL_ICL, NULL);
-+			}
-+#endif
-+		}
-+
-+		if (usb_mux_dispatcher)
-+			usb_mux_dispatcher(tty); /* call Liu changhui's func. */
-+
-+		urb->actual_length = 0;
-+		urb->dev = bvd_ipc->ipc_dev;
-+		if (usb_submit_urb(urb, GFP_ATOMIC))
-+			bvd_dbg("failed resubmitting read urb");
-+#if 0
-+		if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
-+		{
-+			last_jiff = jiffies;
-+			queue_apm_event(KRNL_ICL, NULL);
-+		}
-+#endif
-+		bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
-+	}
-+
-+	bvd_dbg("usb_ipc_read_bulk: completed!!!");
-+}
-+
-+static void usb_ipc_write_bulk(struct urb *urb, struct pt_regs *regs)
-+{
-+	callback_times++;
-+	bvd_ipc->write_finished_flag = 1;
-+
-+	bvd_dbg("usb_ipc_write_bulk: begining!");
-+	//printk("%s: write_finished_flag=%d\n", __FUNCTION__, bvd_ipc->write_finished_flag);
-+
-+	if (urb->status)
-+		printk("nonzero write bulk status received: %d\n", urb->status);
-+
-+	if (usb_mux_sender)
-+		usb_mux_sender();		/**call Liu changhui's func**/
-+
-+	//printk("usb_ipc_write_bulk: mark ipcusb_softint!\n");
-+	tasklet_schedule(&bvd_ipc->bh);
-+
-+	bvd_dbg("usb_ipc_write_bulk: finished!");
-+}
-+
-+static void wakeup_timeout(unsigned long data)
-+{
-+	GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
-+	bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!");
-+}
-+
-+static void suspend_timeout(unsigned long data)
-+{
-+	if (bvd_ipc->suspend_flag == 1) {
-+		bvd_ipc->suspend_flag = 0;
-+		mod_timer(&suspend_timer, jiffies+(5000*HZ/1000));
-+		bvd_dbg("suspend_timeout: add the suspend timer again");
-+	} else {
-+		unlink_urbs(&bvd_ipc->readurb_mux);
-+		UHCRHPS3 = 0x4;
-+		mdelay(40);
-+		bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x",
-+			UHCRHPS3);
-+	}
-+}
-+
-+static void ipcusb_xmit_data(void)
-+{
-+	int c, count = IPC_URB_SIZE;
-+	int result = 0;
-+	int buf_flag = 0;
-+	int buf_num = 0;
-+
-+	//printk("%s: sumbit_times=%d, callback_times=%d\n", __FUNCTION__, sumbit_times, callback_times);
-+	if (bvd_ipc->write_finished_flag == 0)
-+		return;
-+
-+	while (1) {
-+		c = CIRC_CNT_TO_END(bvd_ipc->xmit.head, bvd_ipc->xmit.tail,
-+				    IPC_USB_XMIT_SIZE);
-+		if (count < c)
-+			c = count;
-+		if (c <= 0)
-+			break;
-+
-+		memcpy(bvd_ipc->obuf+buf_num,
-+		       bvd_ipc->xmit.buf + bvd_ipc->xmit.tail, c);
-+		buf_flag = 1;
-+		bvd_ipc->xmit.tail = ((bvd_ipc->xmit.tail + c)
-+						& (IPC_USB_XMIT_SIZE-1));
-+		count -= c;
-+		buf_num += c;
-+	}
-+
-+	if (buf_num == 0) {
-+		bvd_dbg("ipcusb_xmit_data: buf_num=%d, add suspend_timer",
-+			buf_num);
-+		bvd_ipc->suspend_flag = 0;
-+		mod_timer(&suspend_timer, jiffies+(5000*HZ/1000));
-+	}
-+
-+	bvd_dbg("ipcusb_xmit_data: buf_num=%d", buf_num);
-+	bvd_dbg("ipcusb_xmit_data: bvd_ipc->obuf: ");
-+
-+	bvd_dbg_hex((bvd_ipc->obuf)-buf_num, buf_num);
-+
-+	if (buf_flag) {
-+		bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num;
-+		bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! ");
-+
-+		if ((UHCRHPS3 & 0x4) == 0x4) {
-+			static int ret;
-+			int time = 0;
-+
-+			/* if BP sleep, wake up BP first */
-+			pxa_gpio_mode(GPIO_IN | 41);
-+			if (GPIO_is_high(41)) {
-+				if (GPIO_is_high(GPIO_MCU_INT_SW))
-+					GPCR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
-+				else
-+					GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
-+
-+				time = jiffies;
-+				while (GPIO_is_high(41) && (jiffies < (time+HZ)));
-+
-+				if (GPIO_is_high(41)) {
-+					printk("%s: Wakeup BP timeout! BP state is %d\n",
-+						__FUNCTION__, GPIO_is_high(41));
-+				}
-+				if (GPIO_is_high(GPIO_MCU_INT_SW))
-+					GPCR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
-+				else
-+					GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
-+			}
-+
-+			/* Resume BP */
-+			UHCRHPS3 = 0x8;
-+			mdelay(40);
-+			bvd_dbg("ipcusb_xmit_data: Send RESUME signal! UHCRHPS3=0x%x",
-+				 UHCRHPS3);
-+			/*send IN token*/
-+			bvd_ipc->readurb_mux.actual_length = 0;
-+			bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
-+			if (ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
-+				printk("ipcusb_xmit_data: usb_submit_urb(read mux bulk)"
-+					"failed! status=%d\n", ret);
-+			bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
-+		}
-+
-+		sumbit_times++;
-+		bvd_ipc->write_finished_flag = 0;
-+		//printk("%s: clear write_finished_flag:%d\n", __FUNCTION__, bvd_ipc->write_finished_flag);
-+		bvd_ipc->writeurb_mux.dev = bvd_ipc->ipc_dev;
-+		if (result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC))
-+			warn("ipcusb_xmit_data: funky result! result=%d\n", result);
-+
-+		bvd_dbg("ipcusb_xmit_data: usb_submit_urb finished! result:%d", result);
-+
-+	}
-+}
-+
-+static void usbipc_bh_func(unsigned long param)
-+{
-+	ipcusb_xmit_data();
-+}
-+
-+extern void get_halted_bit(void);
-+
-+static void usbipc_bh_bp_func(unsigned long param)
-+{
-+	if ((UHCRHPS3 & 0x4) == 0x4) {
-+		UHCRHPS3 = 0x8;
-+		mdelay(40);
-+		bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! "
-+			"UHCRHPS3=0x%x", UHCRHPS3);
-+	}
-+	if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
-+		get_halted_bit();
-+
-+		/*send a IN token*/
-+		bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
-+		if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) {
-+			bvd_dbg("ipcusb_softint_send_readurb: "
-+				"usb_submit_urb(read mux bulk) failed!");
-+		}
-+		bvd_dbg("ipcusb_softint_send_readurb: Send a IN token successfully!");
-+		bvd_ipc->suspend_flag = 0;
-+		bvd_dbg("ipcusb_softint_send_readurb: add suspend_timer");
-+		mod_timer(&suspend_timer, jiffies+(5000*HZ/1000));
-+	}
-+}
-+
-+static int usb_ipc_write(struct tty_struct *tty,
-+			 const unsigned char *buf, int count)
-+{
-+	int c, ret = 0;
-+
-+	bvd_dbg("usb_ipc_write: count=%d, buf: ", count);
-+	bvd_dbg_hex(buf, count);
-+
-+	if (count <= 0)
-+		return 0;
-+
-+	if (*ipcusb_ap_to_bp != NULL)
-+		(*ipcusb_ap_to_bp)(buf, count);
-+
-+	bvd_ipc->suspend_flag = 1;
-+
-+	if ((bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) &&
-+	    (bvd_ipc->xmit.head == bvd_ipc->xmit.tail)) {
-+		bvd_dbg("usb_ipc_write: set write_flag");
-+		bvd_ipc->write_flag = IPC_USB_WRITE_XMIT;
-+	}
-+
-+	while (1) {
-+		c = CIRC_SPACE_TO_END(bvd_ipc->xmit.head,
-+				      bvd_ipc->xmit.tail, IPC_USB_XMIT_SIZE);
-+		if (count < c)
-+			c = count;
-+		if (c <= 0)
-+			break;
-+
-+		memcpy(bvd_ipc->xmit.buf + bvd_ipc->xmit.head, buf, c);
-+		bvd_ipc->xmit.head = ((bvd_ipc->xmit.head + c)
-+						& (IPC_USB_XMIT_SIZE-1));
-+		buf += c;
-+		count -= c;
-+		ret += c;
-+	}
-+	bvd_dbg("usb_ipc_write: ret=%d, bvd_ipc->xmit.buf: ", ret);
-+
-+	bvd_dbg_hex(bvd_ipc->xmit.buf, ret);
-+
-+	if (bvd_ipc->write_flag == IPC_USB_WRITE_XMIT) {
-+		bvd_ipc->write_flag = IPC_USB_WRITE_INIT;
-+		bvd_dbg("usb_ipc_write: mark ipcusb_softint");
-+		tasklet_schedule(&bvd_ipc->bh);
-+	}
-+
-+	bvd_dbg("usb_ipc_write: ret=%d\n", ret);
-+	return ret;
-+}
-+
-+static int usb_ipc_chars_in_buffer(struct tty_struct *tty)
-+{
-+	return CIRC_CNT(bvd_ipc->xmit.head, bvd_ipc->xmit.tail, IPC_USB_XMIT_SIZE);
-+}
-+
-+void usb_send_readurb(void)
-+{
-+	//printk("usb_send_readurb: begining!UHCRHPS3=0x%x, usbh_finished_resume=%d\n", UHCRHPS3, usbh_finished_resume);
-+
-+	if (usbh_finished_resume == 0)
-+		return;
-+
-+	tasklet_schedule(&bvd_ipc->bh_bp);
-+}
-+
-+static int usb_ipc_probe(struct usb_interface *intf,
-+			 const struct usb_device_id *id)
-+{
-+	struct usb_device *usbdev = interface_to_usbdev(intf);
-+	struct usb_config_descriptor *ipccfg;
-+	struct usb_interface_descriptor *interface;
-+	struct usb_endpoint_descriptor *endpoint;
-+	int ep_cnt, readsize, writesize;
-+	char have_bulk_in_mux, have_bulk_out_mux;
-+
-+	bvd_dbg("usb_ipc_probe: vendor id 0x%x, device id 0x%x",
-+		usbdev->descriptor.idVendor, usbdev->descriptor.idProduct);
-+
-+	if ((usbdev->descriptor.idVendor != MOTO_IPC_VID) ||
-+	    (usbdev->descriptor.idProduct != MOTO_IPC_PID))
-+ 		return -ENODEV;
-+
-+	/* a2590c : dsplog interface is not supported by this driver */
-+	if (intf->minor == 2)	/* dsplog interface number is 2 */
-+		return -1;
-+
-+	bvd_dbg("usb_ipc_probe: USB dev address:%p", usbdev);
-+	bvd_dbg("usb_ipc_probe: ifnum:%u", intf->minor);
-+
-+	ipccfg = &usbdev->actconfig->desc;
-+	bvd_dbg("usb_ipc_prob: config%d", ipccfg->bConfigurationValue);
-+	bvd_dbg("usb_ipc_prob: bNumInterfaces = %d", ipccfg->bNumInterfaces);
-+
-+	/* After this point we can be a little noisy about what we are trying
-+	 * to configure, hehe.  */
-+	if (usbdev->descriptor.bNumConfigurations != 1) {
-+		info("usb_ipc_probe: Only one device configuration "
-+		     "is supported.");
-+		return -1;
-+	}
-+
-+	if (usbdev->config[0].desc.bNumInterfaces != 3) {
-+		info("usb_ipc_probe: Only three device interfaces are "
-+		     "supported.");
-+		return -1;
-+	}
-+
-+	interface = &intf->cur_altsetting->desc;
-+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-+	/* Start checking for two bulk endpoints or ... FIXME: This is a future
-+	 * enhancement...*/
-+	bvd_dbg("usb_ipc_probe: Number of Endpoints:%d",
-+		(int) interface->bNumEndpoints);
-+	if (interface->bNumEndpoints != 2) {
-+		info("usb_ipc_probe: Only two endpoints supported.");
-+		return -1;
-+	}
-+
-+	ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0;
-+
-+	bvd_dbg("usb_ipc_probe: endpoint[0] is:%x",
-+		(&endpoint[0])->bEndpointAddress);
-+	bvd_dbg("usb_ipc_probe: endpoint[1] is:%x ",
-+		(&endpoint[1])->bEndpointAddress);
-+
-+	while (ep_cnt < interface->bNumEndpoints) {
-+
-+		if (!have_bulk_in_mux && IS_EP_BULK_IN(endpoint[ep_cnt])) {
-+			bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is:%x ",
-+				(&endpoint[ep_cnt])->bEndpointAddress);
-+			have_bulk_in_mux =
-+					(&endpoint[ep_cnt])->bEndpointAddress;
-+			readsize = (&endpoint[ep_cnt])->wMaxPacketSize;
-+			bvd_dbg("usb_ipc_probe: readsize=%d", readsize);
-+			ep_cnt++;
-+			continue;
-+		}
-+
-+		if (!have_bulk_out_mux && IS_EP_BULK_OUT(endpoint[ep_cnt])) {
-+			bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is:%x ",
-+				(&endpoint[ep_cnt])->bEndpointAddress);
-+			have_bulk_out_mux =
-+				(&endpoint[ep_cnt])->bEndpointAddress;
-+			writesize = (&endpoint[ep_cnt])->wMaxPacketSize;
-+			bvd_dbg("usb_ipc_probe: writesize=%d", writesize);
-+			ep_cnt++;
-+			continue;
-+		}
-+
-+		info("usb_ipc_probe: Undetected endpoint ^_^ ");
-+		/* Shouldn't ever get here unless we have something weird */
-+		return -1;
-+	}
-+
-+	/* Perform a quick check to make sure that everything worked as it
-+	 * should have.  */
-+
-+	switch (interface->bNumEndpoints) {
-+	case 2:
-+		if (!have_bulk_in_mux || !have_bulk_out_mux) {
-+			info("usb_ipc_probe: Two bulk endpoints required.");
-+			return -1;
-+		}
-+		break;
-+	default:
-+		info("usb_ipc_probe: Endpoint determination failed ^_^ ");
-+		return -1;
-+	}
-+
-+	/* Ok, now initialize all the relevant values */
-+	if (!(bvd_ipc->obuf = (char *)kmalloc(writesize, GFP_KERNEL))) {
-+		err("usb_ipc_probe: Not enough memory for the output buffer.");
-+		kfree(bvd_ipc);
-+		return -1;
-+	}
-+	bvd_dbg("usb_ipc_probe: obuf address:%p", bvd_ipc->obuf);
-+
-+	if (!(bvd_ipc->ibuf = (char *)kmalloc(readsize, GFP_KERNEL))) {
-+		err("usb_ipc_probe: Not enough memory for the input buffer.");
-+		kfree(bvd_ipc->obuf);
-+		kfree(bvd_ipc);
-+		return -1;
-+	}
-+	bvd_dbg("usb_ipc_probe: ibuf address:%p", bvd_ipc->ibuf);
-+
-+	bvd_ipc->ipc_flag = IPC_USB_PROBE_READY;
-+	bvd_ipc->write_finished_flag = 1;
-+	bvd_ipc->suspend_flag = 1;
-+	bvd_ipc->bulk_in_ep_mux= have_bulk_in_mux;
-+	bvd_ipc->bulk_out_ep_mux= have_bulk_out_mux;
-+	bvd_ipc->ipc_dev = usbdev;
-+	bvd_ipc->writesize = writesize;
-+	INIT_LIST_HEAD (&bvd_ipc->in_buf_list);
-+
-+	bvd_ipc->bh.func = usbipc_bh_func;
-+	bvd_ipc->bh.data = (unsigned long) bvd_ipc;
-+
-+	bvd_ipc->bh_bp.func = usbipc_bh_bp_func;
-+	bvd_ipc->bh_bp.data = (unsigned long) bvd_ipc;
-+
-+	/*Build a write urb*/
-+	usb_fill_bulk_urb(&bvd_ipc->writeurb_mux, usbdev,
-+			  usb_sndbulkpipe(bvd_ipc->ipc_dev,
-+			  		  bvd_ipc->bulk_out_ep_mux),
-+			  bvd_ipc->obuf, writesize, usb_ipc_write_bulk,
-+			  bvd_ipc);
-+	//bvd_ipc->writeurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
-+
-+	/*Build a read urb and send a IN token first time*/
-+	usb_fill_bulk_urb(&bvd_ipc->readurb_mux, usbdev,
-+			  usb_rcvbulkpipe(usbdev, bvd_ipc->bulk_in_ep_mux),
-+			  bvd_ipc->ibuf, readsize, usb_ipc_read_bulk, bvd_ipc);
-+	//bvd_ipc->readurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
-+
-+	usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc);
-+	//usb_driver_claim_interface(&usb_ipc_driver, &ipccfg->interface[1], bvd_ipc);
-+
-+        // a2590c: dsplog is not supported by this driver
-+	//	usb_driver_claim_interface(&usb_ipc_driver,
-+	//				   &ipccfg->interface[2], bvd_ipc);
-+	/*send a IN token first time*/
-+	bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
-+	if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
-+		printk("usb_ipc_prob: usb_submit_urb(read mux bulk) failed!\n");
-+
-+	bvd_dbg("usb_ipc_prob: Send a IN token successfully!");
-+
-+	if (bvd_ipc->xmit.head != bvd_ipc->xmit.tail) {
-+		printk("usb_ipc_probe: mark ipcusb_softint!\n");
-+		tasklet_schedule(&bvd_ipc->bh);
-+	}
-+
-+	printk("usb_ipc_probe: completed probe!");
-+	usb_set_intfdata(intf, &bvd_ipc);
-+	return 0;
-+}
-+
-+static void usb_ipc_disconnect(struct usb_interface *intf)
-+{
-+	//struct usb_device *usbdev = interface_to_usbdev(intf);
-+	struct ipc_usb_data *bvd_ipc_disconnect = usb_get_intfdata(intf);
-+
-+	printk("usb_ipc_disconnect:*** \n");
-+
-+	if ((UHCRHPS3 & 0x4) == 0)
-+		usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
-+
-+	usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
-+
-+	bvd_ipc_disconnect->ipc_flag = IPC_USB_PROBE_NOT_READY;
-+	kfree(bvd_ipc_disconnect->ibuf);
-+	kfree(bvd_ipc_disconnect->obuf);
-+
-+	usb_driver_release_interface(&usb_ipc_driver,
-+			bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]);
-+        usb_driver_release_interface(&usb_ipc_driver,
-+			bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]);
-+
-+	//a2590c: dsplog interface is not supported by this driver
-+	//usb_driver_release_interface(&usb_ipc_driver, &bvd_ipc_disconnect->ipc_dev->actconfig->interface[2]);
-+
-+	bvd_ipc_disconnect->ipc_dev = NULL;
-+
-+	usb_set_intfdata(intf, NULL);
-+
-+	printk("usb_ipc_disconnect completed!\n");
-+}
-+
-+static struct usb_device_id usb_ipc_id_table[] = {
-+	{ USB_DEVICE(MOTO_IPC_VID, MOTO_IPC_PID) },
-+	{ }						/* Terminating entry */
-+};
-+
-+static struct usb_driver usb_ipc_driver = {
-+	.name		= "usb ipc",
-+	.probe		= usb_ipc_probe,
-+	.disconnect	= usb_ipc_disconnect,
-+	.id_table	= usb_ipc_id_table,
-+};
-+
-+static int __init usb_ipc_init(void)
-+{
-+	int result;
-+
-+	bvd_dbg("init usb_ipc");
-+	/* register driver at the USB subsystem */
-+	result = usb_register(&usb_ipc_driver);
-+	if (result < 0) {
-+		err ("usb ipc driver could not be registered");
-+		return result;
-+	}
-+
-+	/*init the related mux interface*/
-+	if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) {
-+		err("usb_ipc_init: Out of memory.");
-+		usb_deregister(&usb_ipc_driver);
-+		return -ENOMEM;
-+	}
-+	bvd_dbg("usb_ipc_init: Address of bvd_ipc:%p", bvd_ipc);
-+
-+	if (!(bvd_ipc->xmit.buf = kmalloc(IPC_USB_XMIT_SIZE, GFP_KERNEL))) {
-+		err("usb_ipc_init: Not enough memory for the input buffer.");
-+		kfree(bvd_ipc);
-+		usb_deregister(&usb_ipc_driver);
-+		return -ENOMEM;
-+	}
-+	bvd_dbg("usb_ipc_init: bvd_ipc->xmit.buf address:%p",
-+		bvd_ipc->xmit.buf);
-+	bvd_ipc->ipc_dev = NULL;
-+	bvd_ipc->xmit.head = bvd_ipc->xmit.tail = 0;
-+	bvd_ipc->write_flag = IPC_USB_WRITE_INIT;
-+
-+	ipcusb_tty_driver.write = usb_ipc_write;
-+	ipcusb_tty_driver.chars_in_buffer = usb_ipc_chars_in_buffer;
-+
-+	usb_for_mux_driver = &ipcusb_tty_driver;
-+	usb_for_mux_tty = &ipcusb_tty;
-+
-+	/* init timers for ipcusb read process and usb suspend */
-+	init_timer(&ipcusb_timer);
-+	ipcusb_timer.function = ipcusb_timeout;
-+
-+	init_timer(&suspend_timer);
-+	suspend_timer.function = suspend_timeout;
-+
-+	init_timer(&wakeup_timer);
-+	wakeup_timer.function = wakeup_timeout;
-+
-+	info("USB Host(Bulverde) IPC driver registered.");
-+	info(DRIVER_VERSION ":" DRIVER_DESC);
-+
-+	return 0;
-+}
-+
-+static void __exit usb_ipc_exit(void)
-+{
-+	bvd_dbg("cleanup bvd_ipc");
-+
-+	kfree(bvd_ipc->xmit.buf);
-+	kfree(bvd_ipc);
-+	usb_deregister(&usb_ipc_driver);
-+
-+	info("USB Host(Bulverde) IPC driver deregistered.");
-+}
-+
-+module_init(usb_ipc_init);
-+module_exit(usb_ipc_exit);
-+EXPORT_SYMBOL(usb_send_readurb);
-Index: linux-2.6.21/drivers/char/ts0710_mux_usb.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/char/ts0710_mux_usb.h	2007-05-06 17:10:21.000000000 -0300
-@@ -0,0 +1,29 @@
-+/*
-+ * linux/drivers/usb/ipcusb.h
-+ *
-+ * Implementation of a ipc driver based Intel's Bulverde USB Host
-+ * Controller.
-+ *
-+ * Copyright (C) 2003-2005 Motorola
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  2003-Nov-18 - (Motorola) created
-+ *
-+ */
-+extern struct tty_driver *usb_for_mux_driver;
-+extern struct tty_struct *usb_for_mux_tty;
-+extern void (*usb_mux_dispatcher)(struct tty_struct *tty);
-+extern void (*usb_mux_sender)(void);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/mux_debug.patch b/packages/linux/linux-ezx-2.6.21/patches/mux_debug.patch
deleted file mode 100755
index 58cb25a0b6..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/mux_debug.patch
+++ /dev/null
@@ -1,551 +0,0 @@
-Index: linux-2.6.20.7/drivers/char/ts0710_mux.c
-===================================================================
---- linux-2.6.20.7.orig/drivers/char/ts0710_mux.c	2007-04-22 12:24:18.000000000 +0200
-+++ linux-2.6.20.7/drivers/char/ts0710_mux.c	2007-04-22 12:26:47.000000000 +0200
-@@ -85,6 +85,9 @@
- #include "ts0710.h"
- #include "ts0710_mux.h"
- 
-+#define TS0710DEBUG
-+#define PRINT_OUTPUT_PRINTK
-+
- #define TS0710MUX_GPRS_SESSION_MAX 2
- #define TS0710MUX_MAJOR 250
- #define TS0710MUX_MINOR_START 0
-@@ -316,7 +319,7 @@
- #ifdef TS0710DEBUG
- 
- #ifdef PRINT_OUTPUT_PRINTK
--#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX " __FUNCTION__ ": " fmt "\n" , ## arg)
-+#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX %s: " fmt "\n" , __func__, ## arg)
- #else
- #include "ezxlog.h"
- static __u8 strDebug[256];
-@@ -530,10 +533,10 @@
- 		if (strncmp(p->comm, "aplogd", 6) == 0) {
- 			sig = 1;
- 			if (send_sig(SIGUSR2, p, 1) == 0) {
--				TS0710_PRINTK
-+				TS0710_DEBUG
- 				    ("MUX: success to send SIGUSR2 to aplogd!\n");
- 			} else {
--				TS0710_PRINTK
-+				TS0710_DEBUG
- 				    ("MUX: failure to send SIGUSR2 to aplogd!\n");
- 			}
- 			break;
-@@ -542,7 +545,7 @@
- 	read_unlock(&tasklist_lock);
- 
- 	if (!sig) {
--		TS0710_PRINTK("MUX: not found aplogd!\n");
-+		TS0710_DEBUG("MUX: not found aplogd!\n");
- 	}
- }
- #else
-@@ -559,11 +562,11 @@
- 	buf[len + 1] = TS0710_BASIC_FLAG;
- 
- 	if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
--		TS0710_PRINTK
-+		TS0710_DEBUG
- 		    ("MUX basic_write: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n");
- 
- #ifndef USB_FOR_MUX
--		TS0710_PRINTK
-+		TS0710_DEBUG
- 		    ("MUX basic_write: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n");
- 		TS0710_SIG2APLOGD();
- #endif
-@@ -577,7 +580,7 @@
- 	res = COMM_FOR_MUX_DRIVER->write(COMM_FOR_MUX_TTY, buf, len + 2);
- 
- 	if (res != len + 2) {
--		TS0710_PRINTK("MUX basic_write: Write Error!\n");
-+		TS0710_DEBUG("MUX basic_write: Write Error!\n");
- 		return -1;
- 	}
- 
-@@ -601,7 +604,7 @@
- 		TS0710_DEBUG("crc_check: CRC check OK\n");
- 		return 0;
- 	} else {
--		TS0710_PRINTK("MUX crc_check: CRC check failed\n");
-+		TS0710_DEBUG("MUX crc_check: CRC check failed\n");
- 		return 1;
- 	}
- }
-@@ -1266,7 +1269,7 @@
- 		break;
- 
- 	case FCON:		/*Flow control on command */
--		TS0710_PRINTK
-+		TS0710_DEBUG
- 		    ("MUX Received Flow control(all channels) on command\n");
- 		if (mcc_short_pkt->h.type.cr == MCC_CMD) {
- 			ts0710->dlci[0].state = CONNECTED;
-@@ -1276,7 +1279,7 @@
- 		break;
- 
- 	case FCOFF:		/*Flow control off command */
--		TS0710_PRINTK
-+		TS0710_DEBUG
- 		    ("MUX Received Flow control(all channels) off command\n");
- 		if (mcc_short_pkt->h.type.cr == MCC_CMD) {
- 			for (j = 0; j < TS0710_MAX_CHN; j++) {
-@@ -1823,7 +1826,7 @@
- 			TS0710_DEBUG("UIH on channel %d\n", dlci);
- 
- 			if (uih_len > ts0710->dlci[dlci].mtu) {
--				TS0710_PRINTK
-+				TS0710_DEBUG
- 				    ("MUX Error:  DLCI:%d, uih_len:%d is bigger than mtu:%d, discard data!\n",
- 				     dlci, uih_len, ts0710->dlci[dlci].mtu);
- 				break;
-@@ -1844,7 +1847,7 @@
- 					     dlci, tty_idx);
- 				TS0710_DEBUGSTR(uih_data_start, uih_len);
- 				if (!(iscmdtty[tty_idx])) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX Error: %s: Wrong CMDTAG on DLCI:%d, /dev/mux%d\n",
- 					     __FUNCTION__, dlci, tty_idx);
- 				}
-@@ -1856,7 +1859,7 @@
- 				    ("NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
- 				     dlci, tty_idx);
- 				if (iscmdtty[tty_idx]) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX Error: %s: Wrong NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
- 					     __FUNCTION__, dlci, tty_idx);
- 				}
-@@ -1864,13 +1867,14 @@
- 			}
- 			tty = mux_table[tty_idx];
- 			if ((!mux_tty[tty_idx]) || (!tty)) {
--				TS0710_PRINTK
-+				TS0710_DEBUG
- 				    ("MUX: No application waiting for, discard it! /dev/mux%d\n",
- 				     tty_idx);
-+				TS0710_DEBUG("MUX: mux_tty[%d] = %d, tty is at %i", tty_idx, mux_tty[tty_idx], tty);
- 			} else {	/* Begin processing received data */
- 				if ((!mux_recv_info_flags[tty_idx])
- 				    || (!mux_recv_info[tty_idx])) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX Error: No mux_recv_info, discard it! /dev/mux%d\n",
- 					     tty_idx);
- 					break;
-@@ -1878,7 +1882,7 @@
- 
- 				recv_info = mux_recv_info[tty_idx];
- 				if (recv_info->total > 8192) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX : discard data for tty_idx:%d, recv_info->total > 8192 \n",
- 					     tty_idx);
- 					break;
-@@ -1949,7 +1953,7 @@
- 						    get_mux_recv_packet
- 						    (uih_len);
- 						if (!recv_packet) {
--							TS0710_PRINTK
-+							TS0710_DEBUG
- 							    ("MUX %s: no memory\n",
- 							     __FUNCTION__);
- 							break;
-@@ -1980,7 +1984,7 @@
- 					} else {	/* recv_info->total == 0 */
- 						if (uih_len >
- 						    TS0710MUX_RECV_BUF_SIZE) {
--							TS0710_PRINTK
-+							TS0710_DEBUG
- 							    ("MUX Error:  tty_idx:%d, uih_len == %d is too big\n",
- 							     tty_idx, uih_len);
- 							uih_len =
-@@ -2120,12 +2124,12 @@
- 			if (ts0710->dlci[dlci].state == DISCONNECTED) {
- 				break;
- 			} else if (signal_pending(current)) {
--				TS0710_PRINTK
-+				TS0710_DEBUG
- 				    ("MUX DLCI %d Send DISC got signal!\n",
- 				     dlci);
- 				break;
- 			} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
--				TS0710_PRINTK
-+				TS0710_DEBUG
- 				    ("MUX DLCI %d Send DISC timeout!\n", dlci);
- 				continue;
- 			}
-@@ -2158,7 +2162,7 @@
- 			return 0;
- 		} else if (ts0710->dlci[0].state == CONNECTING) {
- 			/* Reentry */
--			TS0710_PRINTK
-+			TS0710_DEBUG
- 			    ("MUX DLCI: 0, reentry to open DLCI 0, pid: %d, %s !\n",
- 			     current->pid, current->comm);
- 			try = 11;
-@@ -2179,13 +2183,13 @@
- 					   DISCONNECTED) {
- 					break;
- 				} else if (signal_pending(current)) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Wait for connecting got signal!\n",
- 					     dlci);
- 					retval = -EAGAIN;
- 					break;
- 				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Wait for connecting timeout!\n",
- 					     dlci);
- 					continue;
-@@ -2199,7 +2203,7 @@
- 			}
- 		} else if ((ts0710->dlci[0].state != DISCONNECTED)
- 			   && (ts0710->dlci[0].state != REJECTED)) {
--			TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
-+			TS0710_DEBUG("MUX DLCI:%d state is invalid!\n", dlci);
- 			return retval;
- 		} else {
- 			ts0710->initiator = 1;
-@@ -2218,19 +2222,19 @@
- 					retval = 0;
- 					break;
- 				} else if (ts0710->dlci[0].state == REJECTED) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Send SABM got rejected!\n",
- 					     dlci);
- 					retval = -EREJECTED;
- 					break;
- 				} else if (signal_pending(current)) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Send SABM got signal!\n",
- 					     dlci);
- 					retval = -EAGAIN;
- 					break;
- 				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Send SABM timeout!\n",
- 					     dlci);
- 					continue;
-@@ -2271,13 +2275,13 @@
- 					   DISCONNECTED) {
- 					break;
- 				} else if (signal_pending(current)) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Wait for connecting got signal!\n",
- 					     dlci);
- 					retval = -EAGAIN;
- 					break;
- 				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Wait for connecting timeout!\n",
- 					     dlci);
- 					continue;
-@@ -2296,7 +2300,7 @@
- 			}
- 		} else if ((ts0710->dlci[dlci].state != DISCONNECTED)
- 			   && (ts0710->dlci[dlci].state != REJECTED)) {
--			TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
-+			TS0710_DEBUG("MUX DLCI:%d state is invalid!\n", dlci);
- 			return retval;
- 		} else {
- 			ts0710->dlci[dlci].state = NEGOTIATING;
-@@ -2313,13 +2317,13 @@
- 				if (ts0710->dlci[dlci].state == CONNECTING) {
- 					break;
- 				} else if (signal_pending(current)) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Send pn_msg got signal!\n",
- 					     dlci);
- 					retval = -EAGAIN;
- 					break;
- 				} else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX DLCI:%d Send pn_msg timeout!\n",
- 					     dlci);
- 					continue;
-@@ -2344,20 +2348,20 @@
- 						break;
- 					} else if (ts0710->dlci[dlci].state ==
- 						   REJECTED) {
--						TS0710_PRINTK
-+						TS0710_DEBUG
- 						    ("MUX DLCI:%d Send SABM got rejected!\n",
- 						     dlci);
- 						retval = -EREJECTED;
- 						break;
- 					} else if (signal_pending(current)) {
--						TS0710_PRINTK
-+						TS0710_DEBUG
- 						    ("MUX DLCI:%d Send SABM got signal!\n",
- 						     dlci);
- 						retval = -EAGAIN;
- 						break;
- 					} else if ((jiffies - t) >=
- 						   TS0710MUX_TIME_OUT) {
--						TS0710_PRINTK
-+						TS0710_DEBUG
- 						    ("MUX DLCI:%d Send SABM timeout!\n",
- 						     dlci);
- 						continue;
-@@ -2468,7 +2472,7 @@
- 	schedule_work(&send_tqueue);
- #else
- 	if (!tq_serial_for_mux) {
--		TS0710_PRINTK("MUX Error: %s: tq_serial_for_mux == 0\n",
-+		TS0710_DEBUG("MUX Error: %s: tq_serial_for_mux == 0\n",
- 			      __FUNCTION__);
- 		return;
- 	}
-@@ -2508,7 +2512,7 @@
- 	if ((mux_tty[cmdtty] == 0) && (mux_tty[datatty] == 0)) {
- 		if (dlci == 1) {
- 			ts0710_close_channel(0);
--			TS0710_PRINTK
-+			TS0710_DEBUG
- 			    ("MUX mux_close: tapisrv might be down!!! Close DLCI 1\n");
- 			TS0710_SIG2APLOGD();
- 		}
-@@ -2673,12 +2677,12 @@
- 	UNUSED_PARAM(tty);
- 
- 	if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
--		TS0710_PRINTK
-+		TS0710_DEBUG
- 		    ("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n",
- 		     __FUNCTION__);
- 
- #ifndef USB_FOR_MUX
--		TS0710_PRINTK
-+		TS0710_DEBUG
- 		    ("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n",
- 		     __FUNCTION__);
- 		TS0710_SIG2APLOGD();
-@@ -2724,14 +2728,14 @@
- 	} else if (ts0710->dlci[dlci].state == CONNECTED) {
- 
- 		if (!(mux_send_info_flags[line])) {
--			TS0710_PRINTK
-+			TS0710_DEBUG
- 			    ("MUX Error: mux_write: mux_send_info_flags[%d] == 0\n",
- 			     line);
- 			return -ENODEV;
- 		}
- 		send_info = mux_send_info[line];
- 		if (!send_info) {
--			TS0710_PRINTK
-+			TS0710_DEBUG
- 			    ("MUX Error: mux_write: mux_send_info[%d] == 0\n",
- 			     line);
- 			return -ENODEV;
-@@ -2800,7 +2804,7 @@
- 		}
- 		return c;
- 	} else {
--		TS0710_PRINTK("MUX mux_write: DLCI %d not connected\n", dlci);
-+		TS0710_DEBUG("MUX mux_write: DLCI %d not connected\n", dlci);
- 		return -EDISCONNECTED;
- 	}
- }
-@@ -2940,7 +2944,7 @@
- 		return;
- 	}
- 
--	TS0710_PRINTK("MUX %s: line is:%d\n", __FUNCTION__, line);
-+	TS0710_DEBUG("MUX %s: line is:%d\n", __FUNCTION__, line);
- 
- 	if ((mux_send_info_flags[line])
- 	    && (mux_send_info[line])
-@@ -2960,10 +2964,10 @@
- 
- /*
-   if( (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0) ) {
--    TS0710_PRINTK("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__);
-+    TS0710_DEBUG("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__);
- 
- #ifndef USB_FOR_MUX
--    TS0710_PRINTK("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__);
-+    TS0710_DEBUG("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__);
-     TS0710_SIG2APLOGD();
- #endif
- 
-@@ -2989,9 +2993,9 @@
- 	if ((COMM_FOR_MUX_DRIVER == NULL) || (COMM_FOR_MUX_TTY == NULL)) {
- 
- #ifdef USB_FOR_MUX
--		TS0710_PRINTK("MUX: please install and open IPC-USB first\n");
-+		TS0710_DEBUG("MUX: please install and open IPC-USB first\n");
- #else
--		TS0710_PRINTK("MUX: please install and open ttyS0 first\n");
-+		TS0710_DEBUG("MUX: please install and open ttyS0 first\n");
- #endif
- 
- 		goto out;
-@@ -3016,7 +3020,7 @@
- /*  if( dlci == 1 ) { */
- 	/* Open server channel 0 first */
- 	if ((retval = ts0710_open_channel(0)) != 0) {
--		TS0710_PRINTK("MUX: Can't connect server channel 0!\n");
-+		TS0710_DEBUG("MUX: Can't connect server channel 0!\n");
- 		ts0710_init();
- 
- 		mux_tty[line]--;
-@@ -3073,7 +3077,7 @@
- 	datatty = dlci2tty[dlci].datatty;
- 	if ((mux_tty[cmdtty] > 0) || (mux_tty[datatty] > 0)) {
- 		if ((retval = ts0710_open_channel(dlci)) != 0) {
--			TS0710_PRINTK("MUX: Can't connected channel %d!\n",
-+			TS0710_DEBUG("MUX: Can't connected channel %d!\n",
- 				      dlci);
- 			ts0710_reset_dlci(dlci);
- 
-@@ -3096,6 +3100,7 @@
- 	retval = 0;
- #endif
-       out:
-+	TS0710_DEBUG("returning %d for open of /dev/mux%d (mux_tty[%d] = %d", retval, line, line, mux_tty[line]);
- 	return retval;
- }
- 
-@@ -3178,12 +3183,12 @@
- 
-  	while (1) {
-  		tbuf_free = TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf);
-- 		TS0710_PRINTK("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free);
-+ 		TS0710_DEBUG("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free);
-  		tbuf_read = get_from_inbuf_list(tbuf_ptr, tbuf_free);
-  		if (tbuf_read == 0) {
-  			break;
-  		} else {
-- 			TS0710_PRINTK("Read %i bytes.\n", tbuf_read);
-+ 			TS0710_DEBUG("Read %i bytes.\n", tbuf_read);
-  		};
-  		tbuf_ptr += tbuf_read;
-  	};
-@@ -3192,7 +3197,7 @@
- 
-  	// Should be impossible?
-  	//if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
-- 	//	TS0710_PRINTK
-+ 	//	TS0710_DEBUG
-  	//	    ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
-  	//	count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
-  	//}
-@@ -3264,7 +3269,7 @@
- 					TS0710_LOGSTR_FRAME(0, start_flag,
- 							    (tbuf_ptr -
- 							     start_flag));
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX Error: %s: frame length:%d is bigger than Max total frame size:%d\n",
- 		 /*__FUNCTION__, framelen, TS0710MUX_MAX_TOTAL_FRAME_SIZE);*/
- 					     __FUNCTION__, framelen, (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE));	/*For BP UART problem */
-@@ -3389,7 +3394,7 @@
- 								*(uih_data_start
- 								  + uih_len) =
- 						     0;
--								TS0710_PRINTK
-+								TS0710_DEBUG
- 								    ("MUX bp log: %s\n",
- 								     uih_data_start);
- 							}
-@@ -3415,7 +3420,7 @@
- 					TS0710_LOGSTR_FRAME(0, start_flag,
- 							    framelen);
- 					TS0710_DEBUGHEX(start_flag, framelen);
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX: Lost synchronization!\n");
- 					search = start_flag + 1;
- 				}
-@@ -3476,7 +3481,7 @@
- 		recv_info2 = recv_info->next;
- 
- 		if (!(recv_info->total)) {
--			TS0710_PRINTK
-+			TS0710_DEBUG
- 			    ("MUX Error: %s: Should not get here, recv_info->total == 0 \n",
- 			     __FUNCTION__);
- 			continue;
-@@ -3486,7 +3491,7 @@
- 		dlci = tty2dlci[tty_idx];
- 		tty = mux_table[tty_idx];
- 		if ((!mux_tty[tty_idx]) || (!tty)) {
--			TS0710_PRINTK
-+			TS0710_DEBUG
- 			    ("MUX: No application waiting for, free recv_info! tty_idx:%d\n",
- 			     tty_idx);
- 			mux_recv_info_flags[tty_idx] = 0;
-@@ -3560,7 +3565,7 @@
- 					recv_info->total -= recv_packet->length;
- 					free_mux_recv_packet(recv_packet);
- 				} else {
--					TS0710_PRINTK
-+					TS0710_DEBUG
- 					    ("MUX Error: %s: Should not get here, recv_info->total is:%u \n",
- 					     __FUNCTION__, recv_info->total);
- 				}
-@@ -3760,7 +3765,7 @@
- 	int ret;
- 
- 	if (idx > TS0710MUX_COUNT_MAX_IDX) {
--		TS0710_PRINTK("MUX get_count: invalid idx: %d!\n", idx);
-+		TS0710_DEBUG("MUX get_count: invalid idx: %d!\n", idx);
- 		return -1;
- 	}
- 
-@@ -3774,11 +3779,11 @@
- static int set_count(__u8 idx, int count)
- {
- 	if (idx > TS0710MUX_COUNT_MAX_IDX) {
--		TS0710_PRINTK("MUX set_count: invalid idx: %d!\n", idx);
-+		TS0710_DEBUG("MUX set_count: invalid idx: %d!\n", idx);
- 		return -1;
- 	}
- 	if (count < 0) {
--		TS0710_PRINTK("MUX set_count: invalid count: %d!\n", count);
-+		TS0710_DEBUG("MUX set_count: invalid count: %d!\n", count);
- 		return -1;
- 	}
- 
-@@ -3792,11 +3797,11 @@
- static int add_count(__u8 idx, int count)
- {
- 	if (idx > TS0710MUX_COUNT_MAX_IDX) {
--		TS0710_PRINTK("MUX add_count: invalid idx: %d!\n", idx);
-+		TS0710_DEBUG("MUX add_count: invalid idx: %d!\n", idx);
- 		return -1;
- 	}
- 	if (count <= 0) {
--		TS0710_PRINTK("MUX add_count: invalid count: %d!\n", count);
-+		TS0710_DEBUG("MUX add_count: invalid count: %d!\n", count);
- 		return -1;
- 	}
- 
-Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c
-===================================================================
---- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c	2007-04-22 12:26:47.000000000 +0200
-+++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c	2007-04-22 12:26:47.000000000 +0200
-@@ -72,7 +72,8 @@
- #define IPC_USB_PROBE_NOT_READY	4
- #define DBG_MAX_BUF_SIZE	1024
- #define ICL_EVENT_INTERVAL	(HZ)
--#undef BVD_DEBUG
-+
-+#define BVD_DEBUG
- 
- #define IS_EP_BULK(ep)  ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0)
- #define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/patch-2.6.21.4 b/packages/linux/linux-ezx-2.6.21/patches/patch-2.6.21.4
deleted file mode 100644
index 2c2ed60433..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/patch-2.6.21.4
+++ /dev/null
@@ -1,2816 +0,0 @@
-diff --git a/Makefile b/Makefile
-index d970cb1..e5c5531 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 6
- SUBLEVEL = 21
--EXTRAVERSION =
-+EXTRAVERSION = .4
- NAME = Nocturnal Monster Puppy
- 
- # *DOCUMENTATION*
-diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
-index 2409560..7ed141f 100644
---- a/arch/arm/kernel/traps.c
-+++ b/arch/arm/kernel/traps.c
-@@ -273,6 +273,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
- 	struct undef_hook *hook;
- 	siginfo_t info;
- 	void __user *pc;
-+	unsigned long flags;
- 
- 	/*
- 	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
-@@ -291,7 +292,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
- 		get_user(instr, (u32 __user *)pc);
- 	}
- 
--	spin_lock_irq(&undef_lock);
-+	spin_lock_irqsave(&undef_lock, flags);
- 	list_for_each_entry(hook, &undef_hook, node) {
- 		if ((instr & hook->instr_mask) == hook->instr_val &&
- 		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
-@@ -301,7 +302,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
- 			}
- 		}
- 	}
--	spin_unlock_irq(&undef_lock);
-+	spin_unlock_irqrestore(&undef_lock, flags);
- 
- #ifdef CONFIG_DEBUG_USER
- 	if (user_debug & UDBG_UNDEFINED) {
-diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
-index 89ec70e..d907a2a 100644
---- a/arch/arm/mach-iop13xx/pci.c
-+++ b/arch/arm/mach-iop13xx/pci.c
-@@ -1023,7 +1023,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
- 				  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
- 		__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
- 
--		res[0].start = IOP13XX_PCIX_LOWER_IO_PA;
-+		res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
- 		res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
- 		res[0].name  = "IQ81340 ATUX PCI I/O Space";
- 		res[0].flags = IORESOURCE_IO;
-@@ -1033,7 +1033,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
- 		res[1].name  = "IQ81340 ATUX PCI Memory Space";
- 		res[1].flags = IORESOURCE_MEM;
- 		sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
--		sys->io_offset = IOP13XX_PCIX_IO_OFFSET;
-+		sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
- 		break;
- 	case IOP13XX_INIT_ATU_ATUE:
- 		/* Note: the function number field in the PCSR is ro */
-@@ -1044,7 +1044,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
- 
- 		__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
- 
--		res[0].start = IOP13XX_PCIE_LOWER_IO_PA;
-+		res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
- 		res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
- 		res[0].name  = "IQ81340 ATUE PCI I/O Space";
- 		res[0].flags = IORESOURCE_IO;
-@@ -1054,7 +1054,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
- 		res[1].name  = "IQ81340 ATUE PCI Memory Space";
- 		res[1].flags = IORESOURCE_MEM;
- 		sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
--		sys->io_offset = IOP13XX_PCIE_IO_OFFSET;
-+		sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
- 		sys->map_irq = iop13xx_pcie_map_irq;
- 		break;
- 	default:
-diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
-index 16300ad..0cc26da 100644
---- a/arch/arm/plat-iop/time.c
-+++ b/arch/arm/plat-iop/time.c
-@@ -32,22 +32,22 @@ static unsigned long next_jiffy_time;
- 
- unsigned long iop_gettimeoffset(void)
- {
--	unsigned long offset, temp1, temp2;
-+	unsigned long offset, temp;
- 
- 	/* enable cp6, if necessary, to avoid taking the overhead of an
- 	 * undefined instruction trap
- 	 */
- 	asm volatile (
- 	"mrc	p15, 0, %0, c15, c1, 0\n\t"
--	"ands	%1, %0, #(1 << 6)\n\t"
-+	"tst	%0, #(1 << 6)\n\t"
- 	"orreq	%0, %0, #(1 << 6)\n\t"
- 	"mcreq	p15, 0, %0, c15, c1, 0\n\t"
--#ifdef CONFIG_XSCALE
-+#ifdef CONFIG_CPU_XSCALE
- 	"mrceq	p15, 0, %0, c15, c1, 0\n\t"
- 	"moveq	%0, %0\n\t"
- 	"subeq	pc, pc, #4\n\t"
- #endif
--	: "=r"(temp1), "=r"(temp2) : : "cc");
-+	: "=r"(temp) : : "cc");
- 
- 	offset = next_jiffy_time - read_tcr1();
- 
-diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
-index 837b041..ca3e1d3 100644
---- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
-+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
-@@ -341,15 +341,17 @@ static int powernow_acpi_init(void)
- 	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
- 	for (i = 0; i < number_scales; i++) {
- 		u8 fid, vid;
--		unsigned int speed;
-+		struct acpi_processor_px *state =
-+			&acpi_processor_perf->states[i];
-+		unsigned int speed, speed_mhz;
- 
--		pc.val = (unsigned long) acpi_processor_perf->states[i].control;
-+		pc.val = (unsigned long) state->control;
- 		dprintk ("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
- 			 i,
--			 (u32) acpi_processor_perf->states[i].core_frequency,
--			 (u32) acpi_processor_perf->states[i].power,
--			 (u32) acpi_processor_perf->states[i].transition_latency,
--			 (u32) acpi_processor_perf->states[i].control,
-+			 (u32) state->core_frequency,
-+			 (u32) state->power,
-+			 (u32) state->transition_latency,
-+			 (u32) state->control,
- 			 pc.bits.sgtc);
- 
- 		vid = pc.bits.vid;
-@@ -360,6 +362,18 @@ static int powernow_acpi_init(void)
- 		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
- 
- 		speed = powernow_table[i].frequency;
-+		speed_mhz = speed / 1000;
-+
-+		/* processor_perflib will multiply the MHz value by 1000 to
-+		 * get a KHz value (e.g. 1266000). However, powernow-k7 works
-+		 * with true KHz values (e.g. 1266768). To ensure that all
-+		 * powernow frequencies are available, we must ensure that
-+		 * ACPI doesn't restrict them, so we round up the MHz value
-+		 * to ensure that perflib's computed KHz value is greater than
-+		 * or equal to powernow's KHz value.
-+		 */
-+		if (speed % 1000 > 0)
-+			speed_mhz++;
- 
- 		if ((fid_codes[fid] % 10)==5) {
- 			if (have_a0 == 1)
-@@ -368,10 +382,16 @@ static int powernow_acpi_init(void)
- 
- 		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
- 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
--			 fid_codes[fid] % 10, speed/1000, vid,
-+			 fid_codes[fid] % 10, speed_mhz, vid,
- 			 mobile_vid_table[vid]/1000,
- 			 mobile_vid_table[vid]%1000);
- 
-+		if (state->core_frequency != speed_mhz) {
-+			state->core_frequency = speed_mhz;
-+			dprintk("   Corrected ACPI frequency to %d\n",
-+				speed_mhz);
-+		}
-+
- 		if (latency < pc.bits.sgtc)
- 			latency = pc.bits.sgtc;
- 
-@@ -602,7 +622,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
- 			result = powernow_acpi_init();
- 			if (result) {
- 				printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
--				printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml\n");
-+				printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n");
- 			}
- 		} else {
- 			/* SGTC use the bus clock as timer */
-diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
-index fe3b670..e295d87 100644
---- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
-+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
-@@ -521,7 +521,7 @@ static int check_supported_cpu(unsigned int cpu)
- 
- 	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
- 		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
--		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
-+		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
- 			printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
- 			goto out;
- 		}
-diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
-index 0fb2a30..575541f 100644
---- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
-+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
-@@ -46,8 +46,8 @@ struct powernow_k8_data {
- #define CPUID_XFAM			0x0ff00000	/* extended family */
- #define CPUID_XFAM_K8			0
- #define CPUID_XMOD			0x000f0000	/* extended model */
--#define CPUID_XMOD_REV_G		0x00060000
--#define CPUID_XFAM_10H 			0x00100000	/* family 0x10 */
-+#define CPUID_XMOD_REV_MASK		0x00080000
-+#define CPUID_XFAM_10H			0x00100000	/* family 0x10 */
- #define CPUID_USE_XFAM_XMOD		0x00000f00
- #define CPUID_GET_MAX_CAPABILITIES	0x80000000
- #define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
-diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
-index fb9bf1e..f56569f 100644
---- a/arch/sparc64/kernel/of_device.c
-+++ b/arch/sparc64/kernel/of_device.c
-@@ -508,6 +508,13 @@ static int __init build_one_resource(struct device_node *parent,
- 			return 0;
- 	}
- 
-+	/* When we miss an I/O space match on PCI, just pass it up
-+	 * to the next PCI bridge and/or controller.
-+	 */
-+	if (!strcmp(bus->name, "pci") &&
-+	    (addr[0] & 0x03000000) == 0x01000000)
-+		return 0;
-+
- 	return 1;
- }
- 
-diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
-index 0917c24..3494adf 100644
---- a/arch/sparc64/kernel/prom.c
-+++ b/arch/sparc64/kernel/prom.c
-@@ -1555,10 +1555,21 @@ static struct device_node * __init create_node(phandle node, struct device_node
- 
- static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
- {
-+	struct device_node *ret = NULL, *prev_sibling = NULL;
- 	struct device_node *dp;
- 
--	dp = create_node(node, parent);
--	if (dp) {
-+	while (1) {
-+		dp = create_node(node, parent);
-+		if (!dp)
-+			break;
-+
-+		if (prev_sibling)
-+			prev_sibling->sibling = dp;
-+
-+		if (!ret)
-+			ret = dp;
-+		prev_sibling = dp;
-+
- 		*(*nextp) = dp;
- 		*nextp = &dp->allnext;
- 
-@@ -1567,10 +1578,10 @@ static struct device_node * __init build_tree(struct device_node *parent, phandl
- 
- 		dp->child = build_tree(dp, prom_getchild(node), nextp);
- 
--		dp->sibling = build_tree(parent, prom_getsibling(node), nextp);
-+		node = prom_getsibling(node);
- 	}
- 
--	return dp;
-+	return ret;
- }
- 
- void __init prom_build_devicetree(void)
-diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
-index fc99f7b..8ad7bdb 100644
---- a/arch/sparc64/kernel/smp.c
-+++ b/arch/sparc64/kernel/smp.c
-@@ -566,6 +566,9 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
- 	unsigned long flags, status;
- 	int cnt, retries, this_cpu, prev_sent, i;
- 
-+	if (cpus_empty(mask))
-+		return;
-+
- 	/* We have to do this whole thing with interrupts fully disabled.
- 	 * Otherwise if we send an xcall from interrupt context it will
- 	 * corrupt both our mondo block and cpu list state.
-diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c
-index b43c698..fc9f042 100644
---- a/arch/x86_64/kernel/vsyscall.c
-+++ b/arch/x86_64/kernel/vsyscall.c
-@@ -132,7 +132,7 @@ static __always_inline void do_vgettimeofday(struct timeval * tv)
- 
- 	/* convert to usecs and add to timespec: */
- 	tv->tv_usec += nsec_delta / NSEC_PER_USEC;
--	while (tv->tv_usec > USEC_PER_SEC) {
-+	while (tv->tv_usec >= USEC_PER_SEC) {
- 		tv->tv_sec += 1;
- 		tv->tv_usec -= USEC_PER_SEC;
- 	}
-diff --git a/crypto/api.c b/crypto/api.c
-index 55af8bb..33734fd 100644
---- a/crypto/api.c
-+++ b/crypto/api.c
-@@ -48,8 +48,10 @@ EXPORT_SYMBOL_GPL(crypto_mod_get);
- 
- void crypto_mod_put(struct crypto_alg *alg)
- {
-+	struct module *module = alg->cra_module;
-+
- 	crypto_alg_put(alg);
--	module_put(alg->cra_module);
-+	module_put(module);
- }
- EXPORT_SYMBOL_GPL(crypto_mod_put);
- 
-diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
-index 807c711..d341491 100644
---- a/drivers/acpi/tables/tbfadt.c
-+++ b/drivers/acpi/tables/tbfadt.c
-@@ -347,6 +347,20 @@ static void acpi_tb_convert_fadt(void)
- 		acpi_gbl_xpm1b_enable.space_id = acpi_gbl_FADT.xpm1a_event_block.space_id;
- 
- 	}
-+	/*
-+	 * _CST object and C States change notification start with
-+	 * ACPI 2.0 (FADT r3).  Although the field should be Reserved
-+	 * and 0 before then, some pre-r3 FADT set this field and
-+	 * it results in SMM-related boot failures.  For them, clear it.
-+	 */
-+	if ((acpi_gbl_FADT.header.revision < 3) &&
-+		(acpi_gbl_FADT.cst_control != 0)) {
-+			ACPI_WARNING((AE_INFO,
-+				"Ignoring BIOS FADT r%u C-state control",
-+				acpi_gbl_FADT.header.revision));
-+		 	acpi_gbl_FADT.cst_control = 0;
-+	}
-+
- }
- 
- /******************************************************************************
-diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
-index 2ffcca0..4d63974 100644
---- a/drivers/ata/libata-sff.c
-+++ b/drivers/ata/libata-sff.c
-@@ -557,12 +557,30 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
- 	int i, p = 0;
- 	void __iomem * const *iomap;
- 
-+	/* Discard disabled ports. Some controllers show their
-+	   unused channels this way */
-+	if (ata_resources_present(pdev, 0) == 0)
-+		ports &= ~ATA_PORT_PRIMARY;
-+	if (ata_resources_present(pdev, 1) == 0)
-+		ports &= ~ATA_PORT_SECONDARY;
-+
- 	/* iomap BARs */
--	for (i = 0; i < 4; i++) {
--		if (pcim_iomap(pdev, i, 0) == NULL) {
--			dev_printk(KERN_ERR, &pdev->dev,
--				   "failed to iomap PCI BAR %d\n", i);
--			return NULL;
-+	if (ports & ATA_PORT_PRIMARY) {
-+		for (i = 0; i <= 1; i++) {
-+			if (pcim_iomap(pdev, i, 0) == NULL) {
-+				dev_printk(KERN_ERR, &pdev->dev,
-+					   "failed to iomap PCI BAR %d\n", i);
-+				return NULL;
-+			}
-+		}
-+	}
-+	if (ports & ATA_PORT_SECONDARY) {
-+		for (i = 2; i <= 3; i++) {
-+			if (pcim_iomap(pdev, i, 0) == NULL) {
-+				dev_printk(KERN_ERR, &pdev->dev,
-+					   "failed to iomap PCI BAR %d\n", i);
-+				return NULL;
-+			}
- 		}
- 	}
- 
-@@ -577,13 +595,6 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
- 	probe_ent->irq = pdev->irq;
- 	probe_ent->irq_flags = IRQF_SHARED;
- 
--	/* Discard disabled ports. Some controllers show their
--	   unused channels this way */
--	if (ata_resources_present(pdev, 0) == 0)
--		ports &= ~ATA_PORT_PRIMARY;
--	if (ata_resources_present(pdev, 1) == 0)
--		ports &= ~ATA_PORT_SECONDARY;
--
- 	if (ports & ATA_PORT_PRIMARY) {
- 		probe_ent->port[p].cmd_addr = iomap[0];
- 		probe_ent->port[p].altstatus_addr =
-diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
-index 598e6a2..ea6efca 100644
---- a/drivers/ata/sata_via.c
-+++ b/drivers/ata/sata_via.c
-@@ -97,6 +97,10 @@ static struct pci_driver svia_pci_driver = {
- 	.name			= DRV_NAME,
- 	.id_table		= svia_pci_tbl,
- 	.probe			= svia_init_one,
-+#ifdef CONFIG_PM
-+	.suspend		= ata_pci_device_suspend,
-+	.resume			= ata_pci_device_resume,
-+#endif
- 	.remove			= ata_pci_remove_one,
- };
- 
-@@ -116,6 +120,10 @@ static struct scsi_host_template svia_sht = {
- 	.slave_configure	= ata_scsi_slave_config,
- 	.slave_destroy		= ata_scsi_slave_destroy,
- 	.bios_param		= ata_std_bios_param,
-+#ifdef CONFIG_PM
-+	.suspend		= ata_scsi_device_suspend,
-+	.resume			= ata_scsi_device_resume,
-+#endif
- };
- 
- static const struct ata_port_operations vt6420_sata_ops = {
-diff --git a/drivers/base/core.c b/drivers/base/core.c
-index d7fcf82..a8dfee2 100644
---- a/drivers/base/core.c
-+++ b/drivers/base/core.c
-@@ -93,6 +93,9 @@ static void device_release(struct kobject * kobj)
- {
- 	struct device * dev = to_dev(kobj);
- 
-+	kfree(dev->devt_attr);
-+	dev->devt_attr = NULL;
-+
- 	if (dev->release)
- 		dev->release(dev);
- 	else if (dev->type && dev->type->release)
-@@ -765,10 +768,8 @@ void device_del(struct device * dev)
- 
- 	if (parent)
- 		klist_del(&dev->knode_parent);
--	if (dev->devt_attr) {
-+	if (dev->devt_attr)
- 		device_remove_file(dev, dev->devt_attr);
--		kfree(dev->devt_attr);
--	}
- 	if (dev->class) {
- 		sysfs_remove_link(&dev->kobj, "subsystem");
- 		/* If this is not a "fake" compatible device, remove the
-diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
-index e221465..cc13ebc 100644
---- a/drivers/char/ipmi/ipmi_si_intf.c
-+++ b/drivers/char/ipmi/ipmi_si_intf.c
-@@ -1859,10 +1859,10 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
- 
- 	if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- 		info->io_setup = mem_setup;
--		info->io.addr_type = IPMI_IO_ADDR_SPACE;
-+		info->io.addr_type = IPMI_MEM_ADDR_SPACE;
- 	} else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
- 		info->io_setup = port_setup;
--		info->io.addr_type = IPMI_MEM_ADDR_SPACE;
-+		info->io.addr_type = IPMI_IO_ADDR_SPACE;
- 	} else {
- 		kfree(info);
- 		printk("ipmi_si: Unknown ACPI I/O Address type\n");
-diff --git a/drivers/char/random.c b/drivers/char/random.c
-index b9dc7aa..fa5b95b 100644
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -760,7 +760,7 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min,
- 
- static void extract_buf(struct entropy_store *r, __u8 *out)
- {
--	int i, x;
-+	int i;
- 	__u32 data[16], buf[5 + SHA_WORKSPACE_WORDS];
- 
- 	sha_init(buf);
-@@ -772,9 +772,11 @@ static void extract_buf(struct entropy_store *r, __u8 *out)
- 	 * attempts to find previous ouputs), unless the hash
- 	 * function can be inverted.
- 	 */
--	for (i = 0, x = 0; i < r->poolinfo->poolwords; i += 16, x+=2) {
--		sha_transform(buf, (__u8 *)r->pool+i, buf + 5);
--		add_entropy_words(r, &buf[x % 5], 1);
-+	for (i = 0; i < r->poolinfo->poolwords; i += 16) {
-+		/* hash blocks of 16 words = 512 bits */
-+		sha_transform(buf, (__u8 *)(r->pool + i), buf + 5);
-+		/* feed back portion of the resulting hash */
-+		add_entropy_words(r, &buf[i % 5], 1);
- 	}
- 
- 	/*
-@@ -782,7 +784,7 @@ static void extract_buf(struct entropy_store *r, __u8 *out)
- 	 * portion of the pool while mixing, and hash one
- 	 * final time.
- 	 */
--	__add_entropy_words(r, &buf[x % 5], 1, data);
-+	__add_entropy_words(r, &buf[i % 5], 1, data);
- 	sha_transform(buf, (__u8 *)data, buf + 5);
- 
- 	/*
-@@ -1022,37 +1024,44 @@ random_poll(struct file *file, poll_table * wait)
- 	return mask;
- }
- 
--static ssize_t
--random_write(struct file * file, const char __user * buffer,
--	     size_t count, loff_t *ppos)
-+static int
-+write_pool(struct entropy_store *r, const char __user *buffer, size_t count)
- {
--	int ret = 0;
- 	size_t bytes;
- 	__u32 buf[16];
- 	const char __user *p = buffer;
--	size_t c = count;
- 
--	while (c > 0) {
--		bytes = min(c, sizeof(buf));
-+	while (count > 0) {
-+		bytes = min(count, sizeof(buf));
-+		if (copy_from_user(&buf, p, bytes))
-+			return -EFAULT;
- 
--		bytes -= copy_from_user(&buf, p, bytes);
--		if (!bytes) {
--			ret = -EFAULT;
--			break;
--		}
--		c -= bytes;
-+		count -= bytes;
- 		p += bytes;
- 
--		add_entropy_words(&input_pool, buf, (bytes + 3) / 4);
--	}
--	if (p == buffer) {
--		return (ssize_t)ret;
--	} else {
--		struct inode *inode = file->f_path.dentry->d_inode;
--	        inode->i_mtime = current_fs_time(inode->i_sb);
--		mark_inode_dirty(inode);
--		return (ssize_t)(p - buffer);
-+		add_entropy_words(r, buf, (bytes + 3) / 4);
- 	}
-+
-+	return 0;
-+}
-+
-+static ssize_t
-+random_write(struct file * file, const char __user * buffer,
-+	     size_t count, loff_t *ppos)
-+{
-+	size_t ret;
-+	struct inode *inode = file->f_path.dentry->d_inode;
-+
-+	ret = write_pool(&blocking_pool, buffer, count);
-+	if (ret)
-+		return ret;
-+	ret = write_pool(&nonblocking_pool, buffer, count);
-+	if (ret)
-+		return ret;
-+
-+	inode->i_mtime = current_fs_time(inode->i_sb);
-+	mark_inode_dirty(inode);
-+	return (ssize_t)count;
- }
- 
- static int
-@@ -1091,8 +1100,8 @@ random_ioctl(struct inode * inode, struct file * file,
- 			return -EINVAL;
- 		if (get_user(size, p++))
- 			return -EFAULT;
--		retval = random_write(file, (const char __user *) p,
--				      size, &file->f_pos);
-+		retval = write_pool(&input_pool, (const char __user *)p,
-+				    size);
- 		if (retval < 0)
- 			return retval;
- 		credit_entropy_store(&input_pool, ent_count);
-diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c
-index 6d3840e..6a86958 100644
---- a/drivers/crypto/geode-aes.c
-+++ b/drivers/crypto/geode-aes.c
-@@ -102,10 +102,15 @@ geode_aes_crypt(struct geode_aes_op *op)
- 	u32 flags = 0;
- 	unsigned long iflags;
- 
--	if (op->len == 0 || op->src == op->dst)
-+	if (op->len == 0)
- 		return 0;
- 
--	if (op->flags & AES_FLAGS_COHERENT)
-+	/* If the source and destination is the same, then
-+	 * we need to turn on the coherent flags, otherwise
-+	 * we don't need to worry
-+	 */
-+
-+	if (op->src == op->dst)
- 		flags |= (AES_CTRL_DCA | AES_CTRL_SCA);
- 
- 	if (op->dir == AES_DIR_ENCRYPT)
-@@ -120,7 +125,7 @@ geode_aes_crypt(struct geode_aes_op *op)
- 		_writefield(AES_WRITEIV0_REG, op->iv);
- 	}
- 
--	if (op->flags & AES_FLAGS_USRKEY) {
-+	if (!(op->flags & AES_FLAGS_HIDDENKEY)) {
- 		flags |= AES_CTRL_WRKEY;
- 		_writefield(AES_WRITEKEY0_REG, op->key);
- 	}
-@@ -289,6 +294,7 @@ static struct crypto_alg geode_cbc_alg = {
- 			.setkey			=	geode_setkey,
- 			.encrypt		=	geode_cbc_encrypt,
- 			.decrypt		=	geode_cbc_decrypt,
-+			.ivsize			=	AES_IV_LENGTH,
- 		}
- 	}
- };
-diff --git a/drivers/crypto/geode-aes.h b/drivers/crypto/geode-aes.h
-index 8003a36..f479686 100644
---- a/drivers/crypto/geode-aes.h
-+++ b/drivers/crypto/geode-aes.h
-@@ -20,8 +20,7 @@
- #define AES_DIR_DECRYPT 0
- #define AES_DIR_ENCRYPT 1
- 
--#define AES_FLAGS_USRKEY   (1 << 0)
--#define AES_FLAGS_COHERENT (1 << 1)
-+#define AES_FLAGS_HIDDENKEY (1 << 0)
- 
- struct geode_aes_op {
- 
-diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
-index 97ee870..3a95cc5 100644
---- a/drivers/md/raid1.c
-+++ b/drivers/md/raid1.c
-@@ -271,21 +271,25 @@ static int raid1_end_read_request(struct bio *bio, unsigned int bytes_done, int
- 	 */
- 	update_head_pos(mirror, r1_bio);
- 
--	if (uptodate || (conf->raid_disks - conf->mddev->degraded) <= 1) {
--		/*
--		 * Set R1BIO_Uptodate in our master bio, so that
--		 * we will return a good error code for to the higher
--		 * levels even if IO on some other mirrored buffer fails.
--		 *
--		 * The 'master' represents the composite IO operation to
--		 * user-side. So if something waits for IO, then it will
--		 * wait for the 'master' bio.
-+	if (uptodate)
-+		set_bit(R1BIO_Uptodate, &r1_bio->state);
-+	else {
-+		/* If all other devices have failed, we want to return
-+		 * the error upwards rather than fail the last device.
-+		 * Here we redefine "uptodate" to mean "Don't want to retry"
- 		 */
--		if (uptodate)
--			set_bit(R1BIO_Uptodate, &r1_bio->state);
-+		unsigned long flags;
-+		spin_lock_irqsave(&conf->device_lock, flags);
-+		if (r1_bio->mddev->degraded == conf->raid_disks ||
-+		    (r1_bio->mddev->degraded == conf->raid_disks-1 &&
-+		     !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)))
-+			uptodate = 1;
-+		spin_unlock_irqrestore(&conf->device_lock, flags);
-+	}
- 
-+	if (uptodate)
- 		raid_end_bio_io(r1_bio);
--	} else {
-+	else {
- 		/*
- 		 * oops, read error:
- 		 */
-@@ -992,13 +996,14 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev)
- 		unsigned long flags;
- 		spin_lock_irqsave(&conf->device_lock, flags);
- 		mddev->degraded++;
-+		set_bit(Faulty, &rdev->flags);
- 		spin_unlock_irqrestore(&conf->device_lock, flags);
- 		/*
- 		 * if recovery is running, make sure it aborts.
- 		 */
- 		set_bit(MD_RECOVERY_ERR, &mddev->recovery);
--	}
--	set_bit(Faulty, &rdev->flags);
-+	} else
-+		set_bit(Faulty, &rdev->flags);
- 	set_bit(MD_CHANGE_DEVS, &mddev->flags);
- 	printk(KERN_ALERT "raid1: Disk failure on %s, disabling device. \n"
- 		"	Operation continuing on %d devices\n",
-diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
-index 85f21b5..2eb5741 100644
---- a/drivers/message/fusion/mptspi.c
-+++ b/drivers/message/fusion/mptspi.c
-@@ -726,13 +726,15 @@ static int mptspi_slave_configure(struct scsi_device *sdev)
- 	struct _MPT_SCSI_HOST *hd =
- 		(struct _MPT_SCSI_HOST *)sdev->host->hostdata;
- 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
--	int ret = mptscsih_slave_configure(sdev);
-+	int ret;
-+
-+	mptspi_initTarget(hd, vtarget, sdev);
-+
-+	ret = mptscsih_slave_configure(sdev);
- 
- 	if (ret)
- 		return ret;
- 
--	mptspi_initTarget(hd, vtarget, sdev);
--
- 	ddvprintk((MYIOC_s_INFO_FMT "id=%d min_period=0x%02x"
- 		" max_offset=0x%02x max_width=%d\n", hd->ioc->name,
- 		sdev->id, spi_min_period(scsi_target(sdev)),
-diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
-index a3d46ea..32a3003 100644
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2929,11 +2929,6 @@ endif #NETDEVICES
- config NETPOLL
- 	def_bool NETCONSOLE
- 
--config NETPOLL_RX
--	bool "Netpoll support for trapping incoming packets"
--	default n
--	depends on NETPOLL
--
- config NETPOLL_TRAP
- 	bool "Netpoll traffic trapping"
- 	default n
-diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
-index e85f5ec..5006c67 100644
---- a/drivers/net/bnx2.c
-+++ b/drivers/net/bnx2.c
-@@ -54,8 +54,8 @@
- 
- #define DRV_MODULE_NAME		"bnx2"
- #define PFX DRV_MODULE_NAME	": "
--#define DRV_MODULE_VERSION	"1.5.8"
--#define DRV_MODULE_RELDATE	"April 24, 2007"
-+#define DRV_MODULE_VERSION	"1.5.8.1"
-+#define DRV_MODULE_RELDATE	"May 7, 2007"
- 
- #define RUN_AT(x) (jiffies + (x))
- 
-@@ -4510,8 +4510,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
- 		vlan_tag_flags |=
- 			(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
- 	}
--	if ((mss = skb_shinfo(skb)->gso_size) &&
--		(skb->len > (bp->dev->mtu + ETH_HLEN))) {
-+	if ((mss = skb_shinfo(skb)->gso_size)) {
- 		u32 tcp_opt_len, ip_tcp_len;
- 
- 		if (skb_header_cloned(skb) &&
-@@ -5565,6 +5564,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- 	case SIOCGMIIREG: {
- 		u32 mii_regval;
- 
-+		if (!netif_running(dev))
-+			return -EAGAIN;
-+
- 		spin_lock_bh(&bp->phy_lock);
- 		err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval);
- 		spin_unlock_bh(&bp->phy_lock);
-@@ -5578,6 +5580,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- 		if (!capable(CAP_NET_ADMIN))
- 			return -EPERM;
- 
-+		if (!netif_running(dev))
-+			return -EAGAIN;
-+
- 		spin_lock_bh(&bp->phy_lock);
- 		err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in);
- 		spin_unlock_bh(&bp->phy_lock);
-@@ -6143,6 +6148,7 @@ bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
- 		reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
- 	bnx2_reset_chip(bp, reset_code);
- 	bnx2_free_skbs(bp);
-+	pci_save_state(pdev);
- 	bnx2_set_power_state(bp, pci_choose_state(pdev, state));
- 	return 0;
- }
-@@ -6156,6 +6162,7 @@ bnx2_resume(struct pci_dev *pdev)
- 	if (!netif_running(dev))
- 		return 0;
- 
-+	pci_restore_state(pdev);
- 	bnx2_set_power_state(bp, PCI_D0);
- 	netif_device_attach(dev);
- 	bnx2_init_nic(bp);
-diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
-index b2a3b19..ce547af 100644
---- a/drivers/net/sis900.c
-+++ b/drivers/net/sis900.c
-@@ -1754,6 +1754,7 @@ static int sis900_rx(struct net_device *net_dev)
- 			sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
- 		} else {
- 			struct sk_buff * skb;
-+			struct sk_buff * rx_skb;
- 
- 			pci_unmap_single(sis_priv->pci_dev,
- 				sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
-@@ -1787,10 +1788,10 @@ static int sis900_rx(struct net_device *net_dev)
- 			}
- 
- 			/* give the socket buffer to upper layers */
--			skb = sis_priv->rx_skbuff[entry];
--			skb_put(skb, rx_size);
--			skb->protocol = eth_type_trans(skb, net_dev);
--			netif_rx(skb);
-+			rx_skb = sis_priv->rx_skbuff[entry];
-+			skb_put(rx_skb, rx_size);
-+			rx_skb->protocol = eth_type_trans(rx_skb, net_dev);
-+			netif_rx(rx_skb);
- 
- 			/* some network statistics */
- 			if ((rx_status & BCAST) == MCAST)
-diff --git a/drivers/net/skge.c b/drivers/net/skge.c
-index d476a3c..5ef9023 100644
---- a/drivers/net/skge.c
-+++ b/drivers/net/skge.c
-@@ -135,10 +135,13 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
- /* Wake on Lan only supported on Yukon chips with rev 1 or above */
- static u32 wol_supported(const struct skge_hw *hw)
- {
--	if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev != 0)
--		return WAKE_MAGIC | WAKE_PHY;
--	else
-+	if (hw->chip_id == CHIP_ID_GENESIS)
-+		return 0;
-+
-+	if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)
- 		return 0;
-+
-+	return WAKE_MAGIC | WAKE_PHY;
- }
- 
- static u32 pci_wake_enabled(struct pci_dev *dev)
-@@ -3583,7 +3586,9 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
- 	skge->duplex = -1;
- 	skge->speed = -1;
- 	skge->advertising = skge_supported_modes(hw);
--	skge->wol = pci_wake_enabled(hw->pdev) ? wol_supported(hw) : 0;
-+
-+	if (pci_wake_enabled(hw->pdev))
-+		skge->wol = wol_supported(hw) & WAKE_MAGIC;
- 
- 	hw->dev[port] = dev;
- 
-@@ -3789,6 +3794,9 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
- 	struct skge_hw *hw  = pci_get_drvdata(pdev);
- 	int i, err, wol = 0;
- 
-+	if (!hw)
-+		return 0;
-+
- 	err = pci_save_state(pdev);
- 	if (err)
- 		return err;
-@@ -3817,6 +3825,9 @@ static int skge_resume(struct pci_dev *pdev)
- 	struct skge_hw *hw  = pci_get_drvdata(pdev);
- 	int i, err;
- 
-+	if (!hw)
-+		return 0;
-+
- 	err = pci_set_power_state(pdev, PCI_D0);
- 	if (err)
- 		goto out;
-@@ -3855,6 +3866,9 @@ static void skge_shutdown(struct pci_dev *pdev)
- 	struct skge_hw *hw  = pci_get_drvdata(pdev);
- 	int i, wol = 0;
- 
-+	if (!hw)
-+		return;
-+
- 	for (i = 0; i < hw->ports; i++) {
- 		struct net_device *dev = hw->dev[i];
- 		struct skge_port *skge = netdev_priv(dev);
-diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
-index ac36152..b6b444b 100644
---- a/drivers/net/sky2.c
-+++ b/drivers/net/sky2.c
-@@ -123,16 +123,13 @@ static const struct pci_device_id sky2_id_table[] = {
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
--#ifdef broken
--	/* This device causes data corruption problems that are not resolved */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
--#endif
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
--	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
-+//	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
- 	{ 0 }
- };
- 
-@@ -3722,6 +3719,7 @@ err_out_free_regions:
- 	pci_release_regions(pdev);
- 	pci_disable_device(pdev);
- err_out:
-+	pci_set_drvdata(pdev, NULL);
- 	return err;
- }
- 
-@@ -3774,6 +3772,9 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
- 	struct sky2_hw *hw = pci_get_drvdata(pdev);
- 	int i, wol = 0;
- 
-+	if (!hw)
-+		return 0;
-+
- 	del_timer_sync(&hw->idle_timer);
- 	netif_poll_disable(hw->dev[0]);
- 
-@@ -3805,6 +3806,9 @@ static int sky2_resume(struct pci_dev *pdev)
- 	struct sky2_hw *hw = pci_get_drvdata(pdev);
- 	int i, err;
- 
-+	if (!hw)
-+		return 0;
-+
- 	err = pci_set_power_state(pdev, PCI_D0);
- 	if (err)
- 		goto out;
-@@ -3851,6 +3855,9 @@ static void sky2_shutdown(struct pci_dev *pdev)
- 	struct sky2_hw *hw = pci_get_drvdata(pdev);
- 	int i, wol = 0;
- 
-+	if (!hw)
-+		return;
-+
- 	del_timer_sync(&hw->idle_timer);
- 	netif_poll_disable(hw->dev[0]);
- 
-diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
-index c956141..0b89812 100644
---- a/drivers/net/smc911x.c
-+++ b/drivers/net/smc911x.c
-@@ -499,7 +499,7 @@ static inline void	 smc911x_rcv(struct net_device *dev)
- 		SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
- 		SMC_PULL_DATA(data, pkt_len+2+3);
- 
--		DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name,);
-+		DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name);
- 		PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
- 		dev->last_rx = jiffies;
- 		skb->dev = dev;
-diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
-index 256969e..3d20115 100644
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -64,8 +64,8 @@
- 
- #define DRV_MODULE_NAME		"tg3"
- #define PFX DRV_MODULE_NAME	": "
--#define DRV_MODULE_VERSION	"3.75"
--#define DRV_MODULE_RELDATE	"March 23, 2007"
-+#define DRV_MODULE_VERSION	"3.75.1"
-+#define DRV_MODULE_RELDATE	"May 7, 2007"
- 
- #define TG3_DEF_MAC_MODE	0
- #define TG3_DEF_RX_MODE		0
-@@ -3895,8 +3895,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
- 	entry = tp->tx_prod;
- 	base_flags = 0;
- 	mss = 0;
--	if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
--	    (mss = skb_shinfo(skb)->gso_size) != 0) {
-+	if ((mss = skb_shinfo(skb)->gso_size) != 0) {
- 		int tcp_opt_len, ip_tcp_len;
- 
- 		if (skb_header_cloned(skb) &&
-@@ -4053,8 +4052,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
- 	if (skb->ip_summed == CHECKSUM_PARTIAL)
- 		base_flags |= TXD_FLAG_TCPUDP_CSUM;
- 	mss = 0;
--	if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
--	    (mss = skb_shinfo(skb)->gso_size) != 0) {
-+	if ((mss = skb_shinfo(skb)->gso_size) != 0) {
- 		int tcp_opt_len, ip_tcp_len, hdr_len;
- 
- 		if (skb_header_cloned(skb) &&
-@@ -5936,7 +5934,7 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
- 
- 
- /* tp->lock is held. */
--static void __tg3_set_mac_addr(struct tg3 *tp)
-+static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
- {
- 	u32 addr_high, addr_low;
- 	int i;
-@@ -5948,6 +5946,8 @@ static void __tg3_set_mac_addr(struct tg3 *tp)
- 		    (tp->dev->dev_addr[4] <<  8) |
- 		    (tp->dev->dev_addr[5] <<  0));
- 	for (i = 0; i < 4; i++) {
-+		if (i == 1 && skip_mac_1)
-+			continue;
- 		tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
- 		tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
- 	}
-@@ -5974,7 +5974,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
- {
- 	struct tg3 *tp = netdev_priv(dev);
- 	struct sockaddr *addr = p;
--	int err = 0;
-+	int err = 0, skip_mac_1 = 0;
- 
- 	if (!is_valid_ether_addr(addr->sa_data))
- 		return -EINVAL;
-@@ -5985,22 +5985,21 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
- 		return 0;
- 
- 	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
--		/* Reset chip so that ASF can re-init any MAC addresses it
--		 * needs.
--		 */
--		tg3_netif_stop(tp);
--		tg3_full_lock(tp, 1);
-+		u32 addr0_high, addr0_low, addr1_high, addr1_low;
- 
--		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
--		err = tg3_restart_hw(tp, 0);
--		if (!err)
--			tg3_netif_start(tp);
--		tg3_full_unlock(tp);
--	} else {
--		spin_lock_bh(&tp->lock);
--		__tg3_set_mac_addr(tp);
--		spin_unlock_bh(&tp->lock);
-+		addr0_high = tr32(MAC_ADDR_0_HIGH);
-+		addr0_low = tr32(MAC_ADDR_0_LOW);
-+		addr1_high = tr32(MAC_ADDR_1_HIGH);
-+		addr1_low = tr32(MAC_ADDR_1_LOW);
-+
-+		/* Skip MAC addr 1 if ASF is using it. */
-+		if ((addr0_high != addr1_high || addr0_low != addr1_low) &&
-+		    !(addr1_high == 0 && addr1_low == 0))
-+			skip_mac_1 = 1;
- 	}
-+	spin_lock_bh(&tp->lock);
-+	__tg3_set_mac_addr(tp, skip_mac_1);
-+	spin_unlock_bh(&tp->lock);
- 
- 	return err;
- }
-@@ -6317,7 +6316,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
- 		     tp->rx_jumbo_ptr);
- 
- 	/* Initialize MAC address and backoff seed. */
--	__tg3_set_mac_addr(tp);
-+	__tg3_set_mac_addr(tp, 0);
- 
- 	/* MTU + ethernet header + FCS + optional VLAN tag */
- 	tw32(MAC_RX_MTU_SIZE, tp->dev->mtu + ETH_HLEN + 8);
-@@ -6348,8 +6347,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
- 	     tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) ||
- 	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)) {
- 		if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE &&
--		    (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 ||
--		     tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) {
-+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
- 			rdmac_mode |= RDMAC_MODE_FIFO_SIZE_128;
- 		} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
- 			   !(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
-diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
-index 65d6f23..5af9125 100644
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -1737,18 +1737,20 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
- 			quirk_nvidia_ck804_pcie_aer_ext_cap);
- 
- #ifdef CONFIG_PCI_MSI
--/* The Serverworks PCI-X chipset does not support MSI. We cannot easily rely
-- * on setting PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
-- * some other busses controlled by the chipset even if Linux is not aware of it.
-- * Instead of setting the flag on all busses in the machine, simply disable MSI
-- * globally.
-+/* Some chipsets do not support MSI. We cannot easily rely on setting
-+ * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
-+ * some other busses controlled by the chipset even if Linux is not
-+ * aware of it.  Instead of setting the flag on all busses in the
-+ * machine, simply disable MSI globally.
-  */
--static void __init quirk_svw_msi(struct pci_dev *dev)
-+static void __init quirk_disable_all_msi(struct pci_dev *dev)
- {
- 	pci_no_msi();
- 	printk(KERN_WARNING "PCI: MSI quirk detected. MSI deactivated.\n");
- }
--DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi);
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
- 
- /* Disable MSI on chipsets that are known to not support it */
- static void __devinit quirk_disable_msi(struct pci_dev *dev)
-diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
-index 40d4856..c3a6bd2 100644
---- a/drivers/serial/sunhv.c
-+++ b/drivers/serial/sunhv.c
-@@ -493,6 +493,10 @@ static struct of_device_id hv_match[] = {
- 		.name = "console",
- 		.compatible = "qcn",
- 	},
-+	{
-+		.name = "console",
-+		.compatible = "SUNW,sun4v-console",
-+	},
- 	{},
- };
- MODULE_DEVICE_TABLE(of, hv_match);
-diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
-index 3dfa3e4..3257d94 100644
---- a/drivers/usb/atm/cxacru.c
-+++ b/drivers/usb/atm/cxacru.c
-@@ -146,6 +146,12 @@ enum cxacru_info_idx {
- 	CXINF_MAX = 0x1c,
- };
- 
-+enum poll_state {
-+	CX_INIT,
-+	CX_POLLING,
-+	CX_ABORT
-+};
-+
- struct cxacru_modem_type {
- 	u32 pll_f_clk;
- 	u32 pll_b_clk;
-@@ -159,6 +165,8 @@ struct cxacru_data {
- 
- 	int line_status;
- 	struct delayed_work poll_work;
-+	struct mutex poll_state_serialize;
-+	enum poll_state poll_state;
- 
- 	/* contol handles */
- 	struct mutex cm_serialize;
-@@ -356,7 +364,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
- 	/*
- 	struct atm_dev *atm_dev = usbatm_instance->atm_dev;
- 	*/
--	int ret;
-+	int ret, start_polling = 1;
- 
- 	dbg("cxacru_atm_start");
- 
-@@ -376,7 +384,15 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
- 	}
- 
- 	/* Start status polling */
--	cxacru_poll_status(&instance->poll_work.work);
-+	mutex_lock(&instance->poll_state_serialize);
-+	if (instance->poll_state == CX_INIT)
-+		instance->poll_state = CX_POLLING;
-+	else /* poll_state == CX_ABORT */
-+		start_polling = 0;
-+	mutex_unlock(&instance->poll_state_serialize);
-+
-+	if (start_polling)
-+		cxacru_poll_status(&instance->poll_work.work);
- 	return 0;
- }
- 
-@@ -685,6 +701,9 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
- 	instance->usbatm = usbatm_instance;
- 	instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
- 
-+	mutex_init(&instance->poll_state_serialize);
-+	instance->poll_state = CX_INIT;
-+
- 	instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
- 	if (!instance->rcv_buf) {
- 		dbg("cxacru_bind: no memory for rcv_buf");
-@@ -744,6 +763,7 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
- 		struct usb_interface *intf)
- {
- 	struct cxacru_data *instance = usbatm_instance->driver_data;
-+	int stop_polling = 1;
- 
- 	dbg("cxacru_unbind entered");
- 
-@@ -752,8 +772,20 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
- 		return;
- 	}
- 
--	while (!cancel_delayed_work(&instance->poll_work))
--	       flush_scheduled_work();
-+	mutex_lock(&instance->poll_state_serialize);
-+	if (instance->poll_state != CX_POLLING) {
-+		/* Polling hasn't started yet and with
-+		 * the mutex locked it can be prevented
-+		 * from starting.
-+		 */
-+		instance->poll_state = CX_ABORT;
-+		stop_polling = 0;
-+	}
-+	mutex_unlock(&instance->poll_state_serialize);
-+
-+	if (stop_polling)
-+		while (!cancel_delayed_work(&instance->poll_work))
-+			flush_scheduled_work();
- 
- 	usb_kill_urb(instance->snd_urb);
- 	usb_kill_urb(instance->rcv_urb);
-diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
-index a8b3d66..488d61b 100644
---- a/drivers/usb/input/hiddev.c
-+++ b/drivers/usb/input/hiddev.c
-@@ -51,6 +51,7 @@ struct hiddev {
- 	wait_queue_head_t wait;
- 	struct hid_device *hid;
- 	struct list_head list;
-+	spinlock_t list_lock;
- };
- 
- struct hiddev_list {
-@@ -161,7 +162,9 @@ static void hiddev_send_event(struct hid_device *hid,
- {
- 	struct hiddev *hiddev = hid->hiddev;
- 	struct hiddev_list *list;
-+	unsigned long flags;
- 
-+	spin_lock_irqsave(&hiddev->list_lock, flags);
- 	list_for_each_entry(list, &hiddev->list, node) {
- 		if (uref->field_index != HID_FIELD_INDEX_NONE ||
- 		    (list->flags & HIDDEV_FLAG_REPORT) != 0) {
-@@ -171,6 +174,7 @@ static void hiddev_send_event(struct hid_device *hid,
- 			kill_fasync(&list->fasync, SIGIO, POLL_IN);
- 		}
- 	}
-+	spin_unlock_irqrestore(&hiddev->list_lock, flags);
- 
- 	wake_up_interruptible(&hiddev->wait);
- }
-@@ -235,9 +239,13 @@ static int hiddev_fasync(int fd, struct file *file, int on)
- static int hiddev_release(struct inode * inode, struct file * file)
- {
- 	struct hiddev_list *list = file->private_data;
-+	unsigned long flags;
- 
- 	hiddev_fasync(-1, file, 0);
-+
-+	spin_lock_irqsave(&list->hiddev->list_lock, flags);
- 	list_del(&list->node);
-+	spin_unlock_irqrestore(&list->hiddev->list_lock, flags);
- 
- 	if (!--list->hiddev->open) {
- 		if (list->hiddev->exist)
-@@ -257,6 +265,7 @@ static int hiddev_release(struct inode * inode, struct file * file)
- static int hiddev_open(struct inode *inode, struct file *file)
- {
- 	struct hiddev_list *list;
-+	unsigned long flags;
- 
- 	int i = iminor(inode) - HIDDEV_MINOR_BASE;
- 
-@@ -267,7 +276,11 @@ static int hiddev_open(struct inode *inode, struct file *file)
- 		return -ENOMEM;
- 
- 	list->hiddev = hiddev_table[i];
-+
-+	spin_lock_irqsave(&list->hiddev->list_lock, flags);
- 	list_add_tail(&list->node, &hiddev_table[i]->list);
-+	spin_unlock_irqrestore(&list->hiddev->list_lock, flags);
-+
- 	file->private_data = list;
- 
- 	if (!list->hiddev->open++)
-@@ -773,6 +786,7 @@ int hiddev_connect(struct hid_device *hid)
- 
- 	init_waitqueue_head(&hiddev->wait);
- 	INIT_LIST_HEAD(&hiddev->list);
-+	spin_lock_init(&hiddev->list_lock);
- 	hiddev->hid = hid;
- 	hiddev->exist = 1;
- 
-diff --git a/fs/fat/dir.c b/fs/fat/dir.c
-index c16af24..ccf161d 100644
---- a/fs/fat/dir.c
-+++ b/fs/fat/dir.c
-@@ -422,7 +422,7 @@ EODir:
- EXPORT_SYMBOL_GPL(fat_search_long);
- 
- struct fat_ioctl_filldir_callback {
--	struct dirent __user *dirent;
-+	void __user *dirent;
- 	int result;
- 	/* for dir ioctl */
- 	const char *longname;
-@@ -647,62 +647,85 @@ static int fat_readdir(struct file *filp, void *dirent, filldir_t filldir)
- 	return __fat_readdir(inode, filp, dirent, filldir, 0, 0);
- }
- 
--static int fat_ioctl_filldir(void *__buf, const char *name, int name_len,
--			     loff_t offset, u64 ino, unsigned int d_type)
-+#define FAT_IOCTL_FILLDIR_FUNC(func, dirent_type)			   \
-+static int func(void *__buf, const char *name, int name_len,		   \
-+			     loff_t offset, u64 ino, unsigned int d_type)  \
-+{									   \
-+	struct fat_ioctl_filldir_callback *buf = __buf;			   \
-+	struct dirent_type __user *d1 = buf->dirent;			   \
-+	struct dirent_type __user *d2 = d1 + 1;				   \
-+									   \
-+	if (buf->result)						   \
-+		return -EINVAL;						   \
-+	buf->result++;							   \
-+									   \
-+	if (name != NULL) {						   \
-+		/* dirent has only short name */			   \
-+		if (name_len >= sizeof(d1->d_name))			   \
-+			name_len = sizeof(d1->d_name) - 1;		   \
-+									   \
-+		if (put_user(0, d2->d_name)			||	   \
-+		    put_user(0, &d2->d_reclen)			||	   \
-+		    copy_to_user(d1->d_name, name, name_len)	||	   \
-+		    put_user(0, d1->d_name + name_len)		||	   \
-+		    put_user(name_len, &d1->d_reclen))			   \
-+			goto efault;					   \
-+	} else {							   \
-+		/* dirent has short and long name */			   \
-+		const char *longname = buf->longname;			   \
-+		int long_len = buf->long_len;				   \
-+		const char *shortname = buf->shortname;			   \
-+		int short_len = buf->short_len;				   \
-+									   \
-+		if (long_len >= sizeof(d1->d_name))			   \
-+			long_len = sizeof(d1->d_name) - 1;		   \
-+		if (short_len >= sizeof(d1->d_name))			   \
-+			short_len = sizeof(d1->d_name) - 1;		   \
-+									   \
-+		if (copy_to_user(d2->d_name, longname, long_len)	|| \
-+		    put_user(0, d2->d_name + long_len)			|| \
-+		    put_user(long_len, &d2->d_reclen)			|| \
-+		    put_user(ino, &d2->d_ino)				|| \
-+		    put_user(offset, &d2->d_off)			|| \
-+		    copy_to_user(d1->d_name, shortname, short_len)	|| \
-+		    put_user(0, d1->d_name + short_len)			|| \
-+		    put_user(short_len, &d1->d_reclen))			   \
-+			goto efault;					   \
-+	}								   \
-+	return 0;							   \
-+efault:									   \
-+	buf->result = -EFAULT;						   \
-+	return -EFAULT;							   \
-+}
-+
-+FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, dirent)
-+
-+static int fat_ioctl_readdir(struct inode *inode, struct file *filp,
-+			     void __user *dirent, filldir_t filldir,
-+			     int short_only, int both)
- {
--	struct fat_ioctl_filldir_callback *buf = __buf;
--	struct dirent __user *d1 = buf->dirent;
--	struct dirent __user *d2 = d1 + 1;
--
--	if (buf->result)
--		return -EINVAL;
--	buf->result++;
--
--	if (name != NULL) {
--		/* dirent has only short name */
--		if (name_len >= sizeof(d1->d_name))
--			name_len = sizeof(d1->d_name) - 1;
--
--		if (put_user(0, d2->d_name)			||
--		    put_user(0, &d2->d_reclen)			||
--		    copy_to_user(d1->d_name, name, name_len)	||
--		    put_user(0, d1->d_name + name_len)		||
--		    put_user(name_len, &d1->d_reclen))
--			goto efault;
--	} else {
--		/* dirent has short and long name */
--		const char *longname = buf->longname;
--		int long_len = buf->long_len;
--		const char *shortname = buf->shortname;
--		int short_len = buf->short_len;
--
--		if (long_len >= sizeof(d1->d_name))
--			long_len = sizeof(d1->d_name) - 1;
--		if (short_len >= sizeof(d1->d_name))
--			short_len = sizeof(d1->d_name) - 1;
--
--		if (copy_to_user(d2->d_name, longname, long_len)	||
--		    put_user(0, d2->d_name + long_len)			||
--		    put_user(long_len, &d2->d_reclen)			||
--		    put_user(ino, &d2->d_ino)				||
--		    put_user(offset, &d2->d_off)			||
--		    copy_to_user(d1->d_name, shortname, short_len)	||
--		    put_user(0, d1->d_name + short_len)			||
--		    put_user(short_len, &d1->d_reclen))
--			goto efault;
-+	struct fat_ioctl_filldir_callback buf;
-+	int ret;
-+
-+	buf.dirent = dirent;
-+	buf.result = 0;
-+	mutex_lock(&inode->i_mutex);
-+	ret = -ENOENT;
-+	if (!IS_DEADDIR(inode)) {
-+		ret = __fat_readdir(inode, filp, &buf, filldir,
-+				    short_only, both);
- 	}
--	return 0;
--efault:
--	buf->result = -EFAULT;
--	return -EFAULT;
-+	mutex_unlock(&inode->i_mutex);
-+	if (ret >= 0)
-+		ret = buf.result;
-+	return ret;
- }
- 
--static int fat_dir_ioctl(struct inode * inode, struct file * filp,
--		  unsigned int cmd, unsigned long arg)
-+static int fat_dir_ioctl(struct inode *inode, struct file *filp,
-+			 unsigned int cmd, unsigned long arg)
- {
--	struct fat_ioctl_filldir_callback buf;
--	struct dirent __user *d1;
--	int ret, short_only, both;
-+	struct dirent __user *d1 = (struct dirent __user *)arg;
-+	int short_only, both;
- 
- 	switch (cmd) {
- 	case VFAT_IOCTL_READDIR_SHORT:
-@@ -717,7 +740,6 @@ static int fat_dir_ioctl(struct inode * inode, struct file * filp,
- 		return fat_generic_ioctl(inode, filp, cmd, arg);
- 	}
- 
--	d1 = (struct dirent __user *)arg;
- 	if (!access_ok(VERIFY_WRITE, d1, sizeof(struct dirent[2])))
- 		return -EFAULT;
- 	/*
-@@ -728,69 +750,48 @@ static int fat_dir_ioctl(struct inode * inode, struct file * filp,
- 	if (put_user(0, &d1->d_reclen))
- 		return -EFAULT;
- 
--	buf.dirent = d1;
--	buf.result = 0;
--	mutex_lock(&inode->i_mutex);
--	ret = -ENOENT;
--	if (!IS_DEADDIR(inode)) {
--		ret = __fat_readdir(inode, filp, &buf, fat_ioctl_filldir,
--				    short_only, both);
--	}
--	mutex_unlock(&inode->i_mutex);
--	if (ret >= 0)
--		ret = buf.result;
--	return ret;
-+	return fat_ioctl_readdir(inode, filp, d1, fat_ioctl_filldir,
-+				 short_only, both);
- }
- 
- #ifdef CONFIG_COMPAT
- #define	VFAT_IOCTL_READDIR_BOTH32	_IOR('r', 1, struct compat_dirent[2])
- #define	VFAT_IOCTL_READDIR_SHORT32	_IOR('r', 2, struct compat_dirent[2])
- 
--static long fat_compat_put_dirent32(struct dirent *d,
--				    struct compat_dirent __user *d32)
--{
--        if (!access_ok(VERIFY_WRITE, d32, sizeof(struct compat_dirent)))
--                return -EFAULT;
--
--        __put_user(d->d_ino, &d32->d_ino);
--        __put_user(d->d_off, &d32->d_off);
--        __put_user(d->d_reclen, &d32->d_reclen);
--        if (__copy_to_user(d32->d_name, d->d_name, d->d_reclen))
--		return -EFAULT;
-+FAT_IOCTL_FILLDIR_FUNC(fat_compat_ioctl_filldir, compat_dirent)
- 
--        return 0;
--}
--
--static long fat_compat_dir_ioctl(struct file *file, unsigned cmd,
-+static long fat_compat_dir_ioctl(struct file *filp, unsigned cmd,
- 				 unsigned long arg)
- {
--	struct compat_dirent __user *p = compat_ptr(arg);
--	int ret;
--	mm_segment_t oldfs = get_fs();
--	struct dirent d[2];
-+	struct inode *inode = filp->f_path.dentry->d_inode;
-+	struct compat_dirent __user *d1 = compat_ptr(arg);
-+	int short_only, both;
- 
- 	switch (cmd) {
--	case VFAT_IOCTL_READDIR_BOTH32:
--		cmd = VFAT_IOCTL_READDIR_BOTH;
--		break;
- 	case VFAT_IOCTL_READDIR_SHORT32:
--		cmd = VFAT_IOCTL_READDIR_SHORT;
-+		short_only = 1;
-+		both = 0;
-+		break;
-+	case VFAT_IOCTL_READDIR_BOTH32:
-+		short_only = 0;
-+		both = 1;
- 		break;
- 	default:
- 		return -ENOIOCTLCMD;
- 	}
- 
--	set_fs(KERNEL_DS);
--	lock_kernel();
--	ret = fat_dir_ioctl(file->f_path.dentry->d_inode, file,
--			    cmd, (unsigned long) &d);
--	unlock_kernel();
--	set_fs(oldfs);
--	if (ret >= 0) {
--		ret |= fat_compat_put_dirent32(&d[0], p);
--		ret |= fat_compat_put_dirent32(&d[1], p + 1);
--	}
--	return ret;
-+	if (!access_ok(VERIFY_WRITE, d1, sizeof(struct compat_dirent[2])))
-+		return -EFAULT;
-+	/*
-+	 * Yes, we don't need this put_user() absolutely. However old
-+	 * code didn't return the right value. So, app use this value,
-+	 * in order to check whether it is EOF.
-+	 */
-+	if (put_user(0, &d1->d_reclen))
-+		return -EFAULT;
-+
-+	return fat_ioctl_readdir(inode, filp, d1, fat_compat_ioctl_filldir,
-+				 short_only, both);
- }
- #endif /* CONFIG_COMPAT */
- 
-diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
-index 5065baa..3760d02 100644
---- a/fs/jfs/jfs_logmgr.c
-+++ b/fs/jfs/jfs_logmgr.c
-@@ -2354,12 +2354,13 @@ int jfsIOWait(void *arg)
- 			lbmStartIO(bp);
- 			spin_lock_irq(&log_redrive_lock);
- 		}
--		spin_unlock_irq(&log_redrive_lock);
- 
- 		if (freezing(current)) {
-+			spin_unlock_irq(&log_redrive_lock);
- 			refrigerator();
- 		} else {
- 			set_current_state(TASK_INTERRUPTIBLE);
-+			spin_unlock_irq(&log_redrive_lock);
- 			schedule();
- 			current->state = TASK_RUNNING;
- 		}
-diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
-index 6f24768..79bd03b 100644
---- a/fs/nfsd/export.c
-+++ b/fs/nfsd/export.c
-@@ -469,6 +469,13 @@ static int svc_export_parse(struct cache_detail *cd, char *mesg, int mlen)
- 	nd.dentry = NULL;
- 	exp.ex_path = NULL;
- 
-+	/* fs locations */
-+	exp.ex_fslocs.locations = NULL;
-+	exp.ex_fslocs.locations_count = 0;
-+	exp.ex_fslocs.migrated = 0;
-+
-+	exp.ex_uuid = NULL;
-+
- 	if (mesg[mlen-1] != '\n')
- 		return -EINVAL;
- 	mesg[mlen-1] = 0;
-@@ -509,13 +516,6 @@ static int svc_export_parse(struct cache_detail *cd, char *mesg, int mlen)
- 	if (exp.h.expiry_time == 0)
- 		goto out;
- 
--	/* fs locations */
--	exp.ex_fslocs.locations = NULL;
--	exp.ex_fslocs.locations_count = 0;
--	exp.ex_fslocs.migrated = 0;
--
--	exp.ex_uuid = NULL;
--
- 	/* flags */
- 	err = get_int(&mesg, &an_int);
- 	if (err == -ENOENT)
-diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
-index c8178b7..2cac562 100644
---- a/fs/reiserfs/xattr.c
-+++ b/fs/reiserfs/xattr.c
-@@ -68,7 +68,7 @@ static struct dentry *get_xa_root(struct super_block *sb, int flags)
- 	if (!privroot)
- 		return ERR_PTR(-ENODATA);
- 
--	mutex_lock(&privroot->d_inode->i_mutex);
-+	mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
- 	if (REISERFS_SB(sb)->xattr_root) {
- 		xaroot = dget(REISERFS_SB(sb)->xattr_root);
- 		goto out;
-diff --git a/fs/udf/namei.c b/fs/udf/namei.c
-index fe361cd..b254375 100644
---- a/fs/udf/namei.c
-+++ b/fs/udf/namei.c
-@@ -878,7 +878,7 @@ static int udf_rmdir(struct inode * dir, struct dentry * dentry)
- 			inode->i_nlink);
- 	clear_nlink(inode);
- 	inode->i_size = 0;
--	inode_dec_link_count(inode);
-+	inode_dec_link_count(dir);
- 	inode->i_ctime = dir->i_ctime = dir->i_mtime = current_fs_time(dir->i_sb);
- 	mark_inode_dirty(dir);
- 
-diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
-index d26b755..74d7498 100644
---- a/include/asm-arm/arch-iop13xx/iop13xx.h
-+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
-@@ -27,19 +27,24 @@ static inline int iop13xx_cpu_id(void)
- #define IOP13XX_PCI_OFFSET	 IOP13XX_MAX_RAM_SIZE
- 
- /* PCI MAP
-- * 0x0000.0000 - 0x8000.0000           1:1 mapping with Physical RAM
-- * 0x8000.0000 - 0x8800.0000           PCIX/PCIE memory window (128MB)
--*/
-+ * bus range		cpu phys	cpu virt	note
-+ * 0x0000.0000 + 2GB	(n/a)		(n/a)		inbound, 1:1 mapping with Physical RAM
-+ * 0x8000.0000 + 928M	0x1.8000.0000   (ioremap)	PCIX outbound memory window
-+ * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
-+ * 
-+ * IO MAP
-+ * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
-+ * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
-+ */
- #define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
- #define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
- #define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
--#define IOP13XX_PCIX_LOWER_IO_BA      0x0fff0000UL
-+#define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
-+#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
- #define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
- 				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
- #define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
- 				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
--#define IOP13XX_PCIX_IO_OFFSET        (IOP13XX_PCIX_LOWER_IO_VA -\
--				       IOP13XX_PCIX_LOWER_IO_BA)
- #define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- 					   (IOP13XX_PCIX_LOWER_IO_PA\
- 					   - IOP13XX_PCIX_LOWER_IO_VA))
-@@ -65,15 +70,14 @@ static inline int iop13xx_cpu_id(void)
- #define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
- #define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
- #define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
--#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0fff0000UL
-+#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
-+#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
- #define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
- 					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
- #define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
- 					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
- #define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
- 					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
--#define IOP13XX_PCIE_IO_OFFSET        	 (IOP13XX_PCIE_LOWER_IO_VA -\
--					 IOP13XX_PCIE_LOWER_IO_BA)
- #define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- 					   (IOP13XX_PCIE_LOWER_IO_PA\
- 					   - IOP13XX_PCIE_LOWER_IO_VA))
-diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
-index e01b805..26ec046 100644
---- a/include/asm-sparc64/openprom.h
-+++ b/include/asm-sparc64/openprom.h
-@@ -177,7 +177,7 @@ struct linux_nodeops {
- /* More fun PROM structures for device probing. */
- #define PROMREG_MAX     24
- #define PROMVADDR_MAX   16
--#define PROMINTR_MAX    15
-+#define PROMINTR_MAX    32
- 
- struct linux_prom_registers {
- 	unsigned which_io;	/* hi part of physical address			*/
-diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
-index daa4940..bf92c26 100644
---- a/include/linux/clocksource.h
-+++ b/include/linux/clocksource.h
-@@ -48,6 +48,7 @@ struct clocksource;
-  * @shift:		cycle to nanosecond divisor (power of two)
-  * @flags:		flags describing special properties
-  * @vread:		vsyscall based read
-+ * @resume:		resume function for the clocksource, if necessary
-  * @cycle_interval:	Used internally by timekeeping core, please ignore.
-  * @xtime_interval:	Used internally by timekeeping core, please ignore.
-  */
-@@ -61,6 +62,7 @@ struct clocksource {
- 	u32 shift;
- 	unsigned long flags;
- 	cycle_t (*vread)(void);
-+	void (*resume)(void);
- 
- 	/* timekeeping specific data, ignore */
- 	cycle_t cycle_last, cycle_interval;
-@@ -198,6 +200,7 @@ static inline void clocksource_calculate_interval(struct clocksource *c,
- extern int clocksource_register(struct clocksource*);
- extern struct clocksource* clocksource_get_next(void);
- extern void clocksource_change_rating(struct clocksource *cs, int rating);
-+extern void clocksource_resume(void);
- 
- #ifdef CONFIG_GENERIC_TIME_VSYSCALL
- extern void update_vsyscall(struct timespec *ts, struct clocksource *c);
-diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
-index 1a52854..b1b0f68 100644
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -647,8 +647,10 @@ static inline void netif_start_queue(struct net_device *dev)
- static inline void netif_wake_queue(struct net_device *dev)
- {
- #ifdef CONFIG_NETPOLL_TRAP
--	if (netpoll_trap())
-+	if (netpoll_trap()) {
-+		clear_bit(__LINK_STATE_XOFF, &dev->state);
- 		return;
-+	}
- #endif
- 	if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state))
- 		__netif_schedule(dev);
-@@ -656,10 +658,6 @@ static inline void netif_wake_queue(struct net_device *dev)
- 
- static inline void netif_stop_queue(struct net_device *dev)
- {
--#ifdef CONFIG_NETPOLL_TRAP
--	if (netpoll_trap())
--		return;
--#endif
- 	set_bit(__LINK_STATE_XOFF, &dev->state);
- }
- 
-diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h
-index 4e6bbce..535e421 100644
---- a/include/linux/netfilter/nf_conntrack_proto_gre.h
-+++ b/include/linux/netfilter/nf_conntrack_proto_gre.h
-@@ -87,24 +87,6 @@ int nf_ct_gre_keymap_add(struct nf_conn *ct, enum ip_conntrack_dir dir,
- /* delete keymap entries */
- void nf_ct_gre_keymap_destroy(struct nf_conn *ct);
- 
--/* get pointer to gre key, if present */
--static inline __be32 *gre_key(struct gre_hdr *greh)
--{
--	if (!greh->key)
--		return NULL;
--	if (greh->csum || greh->routing)
--		return (__be32 *)(greh+sizeof(*greh)+4);
--	return (__be32 *)(greh+sizeof(*greh));
--}
--
--/* get pointer ot gre csum, if present */
--static inline __sum16 *gre_csum(struct gre_hdr *greh)
--{
--	if (!greh->csum)
--		return NULL;
--	return (__sum16 *)(greh+sizeof(*greh));
--}
--
- extern void nf_ct_gre_keymap_flush(void);
- extern void nf_nat_need_gre(void);
- 
-diff --git a/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h b/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h
-index e371e0f..d0f36f5 100644
---- a/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h
-+++ b/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h
-@@ -90,25 +90,6 @@ int ip_ct_gre_keymap_add(struct ip_conntrack *ct,
- /* delete keymap entries */
- void ip_ct_gre_keymap_destroy(struct ip_conntrack *ct);
- 
--
--/* get pointer to gre key, if present */
--static inline __be32 *gre_key(struct gre_hdr *greh)
--{
--	if (!greh->key)
--		return NULL;
--	if (greh->csum || greh->routing)
--		return (__be32 *) (greh+sizeof(*greh)+4);
--	return (__be32 *) (greh+sizeof(*greh));
--}
--
--/* get pointer ot gre csum, if present */
--static inline __sum16 *gre_csum(struct gre_hdr *greh)
--{
--	if (!greh->csum)
--		return NULL;
--	return (__sum16 *) (greh+sizeof(*greh));
--}
--
- #endif /* __KERNEL__ */
- 
- #endif /* _CONNTRACK_PROTO_GRE_H */
-diff --git a/kernel/cpuset.c b/kernel/cpuset.c
-index f382b0f..9e45dd1 100644
---- a/kernel/cpuset.c
-+++ b/kernel/cpuset.c
-@@ -1751,12 +1751,7 @@ static ssize_t cpuset_tasks_read(struct file *file, char __user *buf,
- {
- 	struct ctr_struct *ctr = file->private_data;
- 
--	if (*ppos + nbytes > ctr->bufsz)
--		nbytes = ctr->bufsz - *ppos;
--	if (copy_to_user(buf, ctr->buf + *ppos, nbytes))
--		return -EFAULT;
--	*ppos += nbytes;
--	return nbytes;
-+	return simple_read_from_buffer(buf, nbytes, ppos, ctr->buf, ctr->bufsz);
- }
- 
- static int cpuset_tasks_release(struct inode *unused_inode, struct file *file)
-diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
-index fe5c7db..5baee91 100644
---- a/kernel/time/clocksource.c
-+++ b/kernel/time/clocksource.c
-@@ -74,6 +74,8 @@ static struct clocksource *watchdog;
- static struct timer_list watchdog_timer;
- static DEFINE_SPINLOCK(watchdog_lock);
- static cycle_t watchdog_last;
-+static int watchdog_resumed;
-+
- /*
-  * Interval: 0.5sec Treshold: 0.0625s
-  */
-@@ -98,15 +100,26 @@ static void clocksource_watchdog(unsigned long data)
- 	struct clocksource *cs, *tmp;
- 	cycle_t csnow, wdnow;
- 	int64_t wd_nsec, cs_nsec;
-+	int resumed;
- 
- 	spin_lock(&watchdog_lock);
- 
-+	resumed = watchdog_resumed;
-+	if (unlikely(resumed))
-+		watchdog_resumed = 0;
-+
- 	wdnow = watchdog->read();
- 	wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
- 	watchdog_last = wdnow;
- 
- 	list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
- 		csnow = cs->read();
-+
-+		if (unlikely(resumed)) {
-+			cs->wd_last = csnow;
-+			continue;
-+		}
-+
- 		/* Initialized ? */
- 		if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
- 			if ((cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) &&
-@@ -136,6 +149,13 @@ static void clocksource_watchdog(unsigned long data)
- 	}
- 	spin_unlock(&watchdog_lock);
- }
-+static void clocksource_resume_watchdog(void)
-+{
-+	spin_lock(&watchdog_lock);
-+	watchdog_resumed = 1;
-+	spin_unlock(&watchdog_lock);
-+}
-+
- static void clocksource_check_watchdog(struct clocksource *cs)
- {
- 	struct clocksource *cse;
-@@ -182,9 +202,34 @@ static void clocksource_check_watchdog(struct clocksource *cs)
- 	if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
- 		cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
- }
-+
-+static inline void clocksource_resume_watchdog(void) { }
- #endif
- 
- /**
-+ * clocksource_resume - resume the clocksource(s)
-+ */
-+void clocksource_resume(void)
-+{
-+	struct list_head *tmp;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&clocksource_lock, flags);
-+
-+	list_for_each(tmp, &clocksource_list) {
-+		struct clocksource *cs;
-+
-+		cs = list_entry(tmp, struct clocksource, list);
-+		if (cs->resume)
-+			cs->resume();
-+	}
-+
-+	clocksource_resume_watchdog();
-+
-+	spin_unlock_irqrestore(&clocksource_lock, flags);
-+}
-+
-+/**
-  * clocksource_get_next - Returns the selected clocksource
-  *
-  */
-diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
-index bfda3f7..a96ec9a 100644
---- a/kernel/time/tick-common.c
-+++ b/kernel/time/tick-common.c
-@@ -31,7 +31,7 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device);
-  */
- ktime_t tick_next_period;
- ktime_t tick_period;
--static int tick_do_timer_cpu = -1;
-+int tick_do_timer_cpu __read_mostly = -1;
- DEFINE_SPINLOCK(tick_device_lock);
- 
- /*
-@@ -295,6 +295,12 @@ static void tick_shutdown(unsigned int *cpup)
- 		clockevents_exchange_device(dev, NULL);
- 		td->evtdev = NULL;
- 	}
-+	/* Transfer the do_timer job away from this cpu */
-+	if (*cpup == tick_do_timer_cpu) {
-+		int cpu = first_cpu(cpu_online_map);
-+
-+		tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1;
-+	}
- 	spin_unlock_irqrestore(&tick_device_lock, flags);
- }
- 
-diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
-index c9d203b..bb13f27 100644
---- a/kernel/time/tick-internal.h
-+++ b/kernel/time/tick-internal.h
-@@ -5,6 +5,7 @@ DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
- extern spinlock_t tick_device_lock;
- extern ktime_t tick_next_period;
- extern ktime_t tick_period;
-+extern int tick_do_timer_cpu __read_mostly;
- 
- extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
- extern void tick_handle_periodic(struct clock_event_device *dev);
-diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
-index 51556b9..f4fc867 100644
---- a/kernel/time/tick-sched.c
-+++ b/kernel/time/tick-sched.c
-@@ -221,6 +221,18 @@ void tick_nohz_stop_sched_tick(void)
- 			ts->tick_stopped = 1;
- 			ts->idle_jiffies = last_jiffies;
- 		}
-+
-+		/*
-+		 * If this cpu is the one which updates jiffies, then
-+		 * give up the assignment and let it be taken by the
-+		 * cpu which runs the tick timer next, which might be
-+		 * this cpu as well. If we don't drop this here the
-+		 * jiffies might be stale and do_timer() never
-+		 * invoked.
-+		 */
-+		if (cpu == tick_do_timer_cpu)
-+			tick_do_timer_cpu = -1;
-+
- 		/*
- 		 * calculate the expiry time for the next timer wheel
- 		 * timer
-@@ -338,12 +350,24 @@ static void tick_nohz_handler(struct clock_event_device *dev)
- {
- 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
- 	struct pt_regs *regs = get_irq_regs();
-+	int cpu = smp_processor_id();
- 	ktime_t now = ktime_get();
- 
- 	dev->next_event.tv64 = KTIME_MAX;
- 
-+	/*
-+	 * Check if the do_timer duty was dropped. We don't care about
-+	 * concurrency: This happens only when the cpu in charge went
-+	 * into a long sleep. If two cpus happen to assign themself to
-+	 * this duty, then the jiffies update is still serialized by
-+	 * xtime_lock.
-+	 */
-+	if (unlikely(tick_do_timer_cpu == -1))
-+		tick_do_timer_cpu = cpu;
-+
- 	/* Check, if the jiffies need an update */
--	tick_do_update_jiffies64(now);
-+	if (tick_do_timer_cpu == cpu)
-+		tick_do_update_jiffies64(now);
- 
- 	/*
- 	 * When we are idle and the tick is stopped, we have to touch
-@@ -431,9 +455,23 @@ static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer)
- 	struct hrtimer_cpu_base *base = timer->base->cpu_base;
- 	struct pt_regs *regs = get_irq_regs();
- 	ktime_t now = ktime_get();
-+	int cpu = smp_processor_id();
-+
-+#ifdef CONFIG_NO_HZ
-+	/*
-+	 * Check if the do_timer duty was dropped. We don't care about
-+	 * concurrency: This happens only when the cpu in charge went
-+	 * into a long sleep. If two cpus happen to assign themself to
-+	 * this duty, then the jiffies update is still serialized by
-+	 * xtime_lock.
-+	 */
-+	if (unlikely(tick_do_timer_cpu == -1))
-+		tick_do_timer_cpu = cpu;
-+#endif
- 
- 	/* Check, if the jiffies need an update */
--	tick_do_update_jiffies64(now);
-+	if (tick_do_timer_cpu == cpu)
-+		tick_do_update_jiffies64(now);
- 
- 	/*
- 	 * Do not call, when we are not in irq context and have
-diff --git a/kernel/timer.c b/kernel/timer.c
-index dd6c2c1..e045774 100644
---- a/kernel/timer.c
-+++ b/kernel/timer.c
-@@ -1903,6 +1903,8 @@ unregister_time_interpolator(struct time_interpolator *ti)
- 		prev = &curr->next;
- 	}
- 
-+	clocksource_resume();
-+
- 	write_seqlock_irqsave(&xtime_lock, flags);
- 	if (ti == time_interpolator) {
- 		/* we lost the best time-interpolator: */
-diff --git a/lib/zlib_inflate/inflate.c b/lib/zlib_inflate/inflate.c
-index fceb97c..7e1e311 100644
---- a/lib/zlib_inflate/inflate.c
-+++ b/lib/zlib_inflate/inflate.c
-@@ -743,12 +743,14 @@ int zlib_inflate(z_streamp strm, int flush)
- 
-     strm->data_type = state->bits + (state->last ? 64 : 0) +
-                       (state->mode == TYPE ? 128 : 0);
--    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
--        ret = Z_BUF_ERROR;
- 
-     if (flush == Z_PACKET_FLUSH && ret == Z_OK &&
--            (strm->avail_out != 0 || strm->avail_in == 0))
-+            strm->avail_out != 0 && strm->avail_in == 0)
- 		return zlib_inflateSyncPacket(strm);
-+
-+    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
-+        ret = Z_BUF_ERROR;
-+
-     return ret;
- }
- 
-diff --git a/mm/hugetlb.c b/mm/hugetlb.c
-index 36db012..88e708b 100644
---- a/mm/hugetlb.c
-+++ b/mm/hugetlb.c
-@@ -140,6 +140,8 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
- 	return page;
- 
- fail:
-+	if (vma->vm_flags & VM_MAYSHARE)
-+		resv_huge_pages++;
- 	spin_unlock(&hugetlb_lock);
- 	return NULL;
- }
-diff --git a/mm/oom_kill.c b/mm/oom_kill.c
-index 3791edf..b3a3dd6 100644
---- a/mm/oom_kill.c
-+++ b/mm/oom_kill.c
-@@ -397,6 +397,7 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order)
- 	struct task_struct *p;
- 	unsigned long points = 0;
- 	unsigned long freed = 0;
-+	int constraint;
- 
- 	blocking_notifier_call_chain(&oom_notify_list, 0, &freed);
- 	if (freed > 0)
-@@ -411,14 +412,15 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order)
- 		show_mem();
- 	}
- 
--	cpuset_lock();
--	read_lock(&tasklist_lock);
--
- 	/*
- 	 * Check if there were limitations on the allocation (only relevant for
- 	 * NUMA) that may require different handling.
- 	 */
--	switch (constrained_alloc(zonelist, gfp_mask)) {
-+	constraint = constrained_alloc(zonelist, gfp_mask);
-+	cpuset_lock();
-+	read_lock(&tasklist_lock);
-+
-+	switch (constraint) {
- 	case CONSTRAINT_MEMORY_POLICY:
- 		oom_kill_process(current, points,
- 				"No available memory (MPOL_BIND)");
-diff --git a/mm/slob.c b/mm/slob.c
-index 5adc29c..c683d35 100644
---- a/mm/slob.c
-+++ b/mm/slob.c
-@@ -150,15 +150,6 @@ static void slob_free(void *block, int size)
- 	spin_unlock_irqrestore(&slob_lock, flags);
- }
- 
--static int FASTCALL(find_order(int size));
--static int fastcall find_order(int size)
--{
--	int order = 0;
--	for ( ; size > 4096 ; size >>=1)
--		order++;
--	return order;
--}
--
- void *__kmalloc(size_t size, gfp_t gfp)
- {
- 	slob_t *m;
-@@ -174,7 +165,7 @@ void *__kmalloc(size_t size, gfp_t gfp)
- 	if (!bb)
- 		return 0;
- 
--	bb->order = find_order(size);
-+	bb->order = get_order(size);
- 	bb->pages = (void *)__get_free_pages(gfp, bb->order);
- 
- 	if (bb->pages) {
-@@ -284,7 +275,7 @@ void *kmem_cache_alloc(struct kmem_cache *c, gfp_t flags)
- 	if (c->size < PAGE_SIZE)
- 		b = slob_alloc(c->size, flags, c->align);
- 	else
--		b = (void *)__get_free_pages(flags, find_order(c->size));
-+		b = (void *)__get_free_pages(flags, get_order(c->size));
- 
- 	if (c->ctor)
- 		c->ctor(b, c, SLAB_CTOR_CONSTRUCTOR);
-@@ -311,7 +302,7 @@ void kmem_cache_free(struct kmem_cache *c, void *b)
- 	if (c->size < PAGE_SIZE)
- 		slob_free(b, c->size);
- 	else
--		free_pages((unsigned long)b, find_order(c->size));
-+		free_pages((unsigned long)b, get_order(c->size));
- }
- EXPORT_SYMBOL(kmem_cache_free);
- 
-diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
-index cac06c4..444a56b 100644
---- a/net/ipv4/fib_frontend.c
-+++ b/net/ipv4/fib_frontend.c
-@@ -777,6 +777,10 @@ static void nl_fib_lookup(struct fib_result_nl *frn, struct fib_table *tb )
- 							    .tos = frn->fl_tos,
- 							    .scope = frn->fl_scope } } };
- 
-+#ifdef CONFIG_IP_MULTIPLE_TABLES
-+	res.r = NULL;
-+#endif
-+
- 	frn->err = -ENOENT;
- 	if (tb) {
- 		local_bh_disable();
-diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
-index 23b99ae..75bd597 100644
---- a/net/ipv4/netfilter/ip_conntrack_core.c
-+++ b/net/ipv4/netfilter/ip_conntrack_core.c
-@@ -302,7 +302,6 @@ destroy_conntrack(struct nf_conntrack *nfct)
- {
- 	struct ip_conntrack *ct = (struct ip_conntrack *)nfct;
- 	struct ip_conntrack_protocol *proto;
--	struct ip_conntrack_helper *helper;
- 	typeof(ip_conntrack_destroyed) destroyed;
- 
- 	DEBUGP("destroy_conntrack(%p)\n", ct);
-@@ -312,10 +311,6 @@ destroy_conntrack(struct nf_conntrack *nfct)
- 	ip_conntrack_event(IPCT_DESTROY, ct);
- 	set_bit(IPS_DYING_BIT, &ct->status);
- 
--	helper = ct->helper;
--	if (helper && helper->destroy)
--		helper->destroy(ct);
--
- 	/* To make sure we don't get any weird locking issues here:
- 	 * destroy_conntrack() MUST NOT be called with a write lock
- 	 * to ip_conntrack_lock!!! -HW */
-@@ -356,6 +351,11 @@ destroy_conntrack(struct nf_conntrack *nfct)
- static void death_by_timeout(unsigned long ul_conntrack)
- {
- 	struct ip_conntrack *ct = (void *)ul_conntrack;
-+	struct ip_conntrack_helper *helper;
-+
-+	helper = ct->helper;
-+	if (helper && helper->destroy)
-+		helper->destroy(ct);
- 
- 	write_lock_bh(&ip_conntrack_lock);
- 	/* Inside lock so preempt is disabled on module removal path.
-diff --git a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
-index e694299..b86479a 100644
---- a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
-+++ b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
-@@ -460,7 +460,8 @@ static int sctp_new(struct ip_conntrack *conntrack,
- 						SCTP_CONNTRACK_NONE, sch->type);
- 
- 		/* Invalid: delete conntrack */
--		if (newconntrack == SCTP_CONNTRACK_MAX) {
-+		if (newconntrack == SCTP_CONNTRACK_NONE ||
-+		    newconntrack == SCTP_CONNTRACK_MAX) {
- 			DEBUGP("ip_conntrack_sctp: invalid new deleting.\n");
- 			return 0;
- 		}
-diff --git a/net/ipv4/netfilter/ip_nat_proto_gre.c b/net/ipv4/netfilter/ip_nat_proto_gre.c
-index 9581020..e3146a3 100644
---- a/net/ipv4/netfilter/ip_nat_proto_gre.c
-+++ b/net/ipv4/netfilter/ip_nat_proto_gre.c
-@@ -70,6 +70,11 @@ gre_unique_tuple(struct ip_conntrack_tuple *tuple,
- 	__be16 *keyptr;
- 	unsigned int min, i, range_size;
- 
-+	/* If there is no master conntrack we are not PPTP,
-+	   do not change tuples */
-+	if (!conntrack->master)
-+		return 0;
-+		
- 	if (maniptype == IP_NAT_MANIP_SRC)
- 		keyptr = &tuple->src.u.gre.key;
- 	else
-@@ -122,18 +127,9 @@ gre_manip_pkt(struct sk_buff **pskb,
- 	if (maniptype == IP_NAT_MANIP_DST) {
- 		/* key manipulation is always dest */
- 		switch (greh->version) {
--		case 0:
--			if (!greh->key) {
--				DEBUGP("can't nat GRE w/o key\n");
--				break;
--			}
--			if (greh->csum) {
--				/* FIXME: Never tested this code... */
--				nf_proto_csum_replace4(gre_csum(greh), *pskb,
--							*(gre_key(greh)),
--							tuple->dst.u.gre.key, 0);
--			}
--			*(gre_key(greh)) = tuple->dst.u.gre.key;
-+		case GRE_VERSION_1701:
-+			/* We do not currently NAT any GREv0 packets.
-+			 * Try to behave like "ip_nat_proto_unknown" */
- 			break;
- 		case GRE_VERSION_PPTP:
- 			DEBUGP("call_id -> 0x%04x\n",
-diff --git a/net/ipv4/netfilter/nf_nat_proto_gre.c b/net/ipv4/netfilter/nf_nat_proto_gre.c
-index e5a34c1..ca3ff84 100644
---- a/net/ipv4/netfilter/nf_nat_proto_gre.c
-+++ b/net/ipv4/netfilter/nf_nat_proto_gre.c
-@@ -72,6 +72,11 @@ gre_unique_tuple(struct nf_conntrack_tuple *tuple,
- 	__be16 *keyptr;
- 	unsigned int min, i, range_size;
- 
-+	/* If there is no master conntrack we are not PPTP,
-+	   do not change tuples */
-+	if (!conntrack->master)
-+		return 0;
-+		
- 	if (maniptype == IP_NAT_MANIP_SRC)
- 		keyptr = &tuple->src.u.gre.key;
- 	else
-@@ -122,18 +127,9 @@ gre_manip_pkt(struct sk_buff **pskb, unsigned int iphdroff,
- 	if (maniptype != IP_NAT_MANIP_DST)
- 		return 1;
- 	switch (greh->version) {
--	case 0:
--		if (!greh->key) {
--			DEBUGP("can't nat GRE w/o key\n");
--			break;
--		}
--		if (greh->csum) {
--			/* FIXME: Never tested this code... */
--			nf_proto_csum_replace4(gre_csum(greh), *pskb,
--					       *(gre_key(greh)),
--					       tuple->dst.u.gre.key, 0);
--		}
--		*(gre_key(greh)) = tuple->dst.u.gre.key;
-+	case GRE_VERSION_1701:
-+		/* We do not currently NAT any GREv0 packets.
-+		 * Try to behave like "nf_nat_proto_unknown" */
- 		break;
- 	case GRE_VERSION_PPTP:
- 		DEBUGP("call_id -> 0x%04x\n", ntohs(tuple->dst.u.gre.key));
-diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
-index 3834b10..824c6b9 100644
---- a/net/ipv4/tcp.c
-+++ b/net/ipv4/tcp.c
-@@ -1759,8 +1759,7 @@ int tcp_disconnect(struct sock *sk, int flags)
- 	tcp_clear_retrans(tp);
- 	inet_csk_delack_init(sk);
- 	sk->sk_send_head = NULL;
--	tp->rx_opt.saw_tstamp = 0;
--	tcp_sack_reset(&tp->rx_opt);
-+	memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
- 	__sk_dst_reset(sk);
- 
- 	BUG_TRAP(!inet->num || icsk->icsk_bind_hash);
-diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
-index 452a82c..a541137 100644
---- a/net/ipv6/addrconf.c
-+++ b/net/ipv6/addrconf.c
-@@ -2281,8 +2281,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
- 		break;
- 
- 	case NETDEV_CHANGENAME:
--#ifdef CONFIG_SYSCTL
- 		if (idev) {
-+			snmp6_unregister_dev(idev);
-+#ifdef CONFIG_SYSCTL
- 			addrconf_sysctl_unregister(&idev->cnf);
- 			neigh_sysctl_unregister(idev->nd_parms);
- 			neigh_sysctl_register(dev, idev->nd_parms,
-@@ -2290,8 +2291,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
- 					      &ndisc_ifinfo_sysctl_change,
- 					      NULL);
- 			addrconf_sysctl_register(idev, &idev->cnf);
--		}
- #endif
-+			snmp6_register_dev(idev);
-+		}
- 		break;
- 	};
- 
-@@ -4060,6 +4062,10 @@ int __init addrconf_init(void)
- 		return err;
- 
- 	ip6_null_entry.rt6i_idev = in6_dev_get(&loopback_dev);
-+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+	ip6_prohibit_entry.rt6i_idev = in6_dev_get(&loopback_dev);
-+	ip6_blk_hole_entry.rt6i_idev = in6_dev_get(&loopback_dev);
-+#endif
- 
- 	register_netdevice_notifier(&ipv6_dev_notf);
- 
-diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
-index fb39604..794b930 100644
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -396,6 +396,7 @@ static int ipv6_rthdr_rcv(struct sk_buff **skbp)
- 
- 	switch (hdr->type) {
- #ifdef CONFIG_IPV6_MIP6
-+	case IPV6_SRCRT_TYPE_2:
- 		break;
- #endif
- 	case IPV6_SRCRT_TYPE_0:
-@@ -651,6 +652,14 @@ EXPORT_SYMBOL_GPL(ipv6_invert_rthdr);
-   Hop-by-hop options.
-  **********************************/
- 
-+/*
-+ * Note: we cannot rely on skb->dst before we assign it in ip6_route_input().
-+ */
-+static inline struct inet6_dev *ipv6_skb_idev(struct sk_buff *skb)
-+{
-+	return skb->dst ? ip6_dst_idev(skb->dst) : __in6_dev_get(skb->dev);
-+}
-+
- /* Router Alert as of RFC 2711 */
- 
- static int ipv6_hop_ra(struct sk_buff **skbp, int optoff)
-@@ -677,25 +686,25 @@ static int ipv6_hop_jumbo(struct sk_buff **skbp, int optoff)
- 	if (skb->nh.raw[optoff+1] != 4 || (optoff&3) != 2) {
- 		LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
- 			       skb->nh.raw[optoff+1]);
--		IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
-+		IP6_INC_STATS_BH(ipv6_skb_idev(skb),
- 				 IPSTATS_MIB_INHDRERRORS);
- 		goto drop;
- 	}
- 
- 	pkt_len = ntohl(*(__be32*)(skb->nh.raw+optoff+2));
- 	if (pkt_len <= IPV6_MAXPLEN) {
--		IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
-+		IP6_INC_STATS_BH(ipv6_skb_idev(skb), IPSTATS_MIB_INHDRERRORS);
- 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
- 		return 0;
- 	}
- 	if (skb->nh.ipv6h->payload_len) {
--		IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
-+		IP6_INC_STATS_BH(ipv6_skb_idev(skb), IPSTATS_MIB_INHDRERRORS);
- 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff);
- 		return 0;
- 	}
- 
- 	if (pkt_len > skb->len - sizeof(struct ipv6hdr)) {
--		IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INTRUNCATEDPKTS);
-+		IP6_INC_STATS_BH(ipv6_skb_idev(skb), IPSTATS_MIB_INTRUNCATEDPKTS);
- 		goto drop;
- 	}
- 
-diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
-index 61e7a6c..1b34ee5 100644
---- a/net/ipv6/ip6_input.c
-+++ b/net/ipv6/ip6_input.c
-@@ -235,7 +235,7 @@ int ip6_mc_input(struct sk_buff *skb)
- 	IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
- 
- 	hdr = skb->nh.ipv6h;
--	deliver = likely(!(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI))) ||
-+	deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
- 	    ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
- 
- 	/*
-diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
-index 3055169..9fa3ffb 100644
---- a/net/ipv6/ip6_output.c
-+++ b/net/ipv6/ip6_output.c
-@@ -449,10 +449,17 @@ int ip6_forward(struct sk_buff *skb)
- 		 */
- 		if (xrlim_allow(dst, 1*HZ))
- 			ndisc_send_redirect(skb, n, target);
--	} else if (ipv6_addr_type(&hdr->saddr)&(IPV6_ADDR_MULTICAST|IPV6_ADDR_LOOPBACK
--						|IPV6_ADDR_LINKLOCAL)) {
-+	} else {
-+		int addrtype = ipv6_addr_type(&hdr->saddr);
-+
- 		/* This check is security critical. */
--		goto error;
-+		if (addrtype & (IPV6_ADDR_MULTICAST|IPV6_ADDR_LOOPBACK))
-+			goto error;
-+		if (addrtype & IPV6_ADDR_LINKLOCAL) {
-+			icmpv6_send(skb, ICMPV6_DEST_UNREACH,
-+				ICMPV6_NOT_NEIGHBOUR, 0, skb->dev);
-+			goto error;
-+		}
- 	}
- 
- 	if (skb->len > dst_mtu(dst)) {
-diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
-index fa3fb50..d57853d 100644
---- a/net/ipv6/proc.c
-+++ b/net/ipv6/proc.c
-@@ -236,6 +236,7 @@ int snmp6_unregister_dev(struct inet6_dev *idev)
- 		return -EINVAL;
- 	remove_proc_entry(idev->stats.proc_dir_entry->name,
- 			  proc_net_devsnmp6);
-+	idev->stats.proc_dir_entry = NULL;
- 	return 0;
- }
- 
-diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
-index 93c4223..dff33cc 100644
---- a/net/ipv6/xfrm6_tunnel.c
-+++ b/net/ipv6/xfrm6_tunnel.c
-@@ -261,7 +261,7 @@ static int xfrm6_tunnel_rcv(struct sk_buff *skb)
- 	__be32 spi;
- 
- 	spi = xfrm6_tunnel_spi_lookup((xfrm_address_t *)&iph->saddr);
--	return xfrm6_rcv_spi(skb, spi);
-+	return xfrm6_rcv_spi(skb, spi) > 0 ? : 0;
- }
- 
- static int xfrm6_tunnel_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
-diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
-index b3a70eb..ce28fdd 100644
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -315,7 +315,6 @@ static void
- destroy_conntrack(struct nf_conntrack *nfct)
- {
- 	struct nf_conn *ct = (struct nf_conn *)nfct;
--	struct nf_conn_help *help = nfct_help(ct);
- 	struct nf_conntrack_l3proto *l3proto;
- 	struct nf_conntrack_l4proto *l4proto;
- 	typeof(nf_conntrack_destroyed) destroyed;
-@@ -327,9 +326,6 @@ destroy_conntrack(struct nf_conntrack *nfct)
- 	nf_conntrack_event(IPCT_DESTROY, ct);
- 	set_bit(IPS_DYING_BIT, &ct->status);
- 
--	if (help && help->helper && help->helper->destroy)
--		help->helper->destroy(ct);
--
- 	/* To make sure we don't get any weird locking issues here:
- 	 * destroy_conntrack() MUST NOT be called with a write lock
- 	 * to nf_conntrack_lock!!! -HW */
-@@ -375,6 +371,10 @@ destroy_conntrack(struct nf_conntrack *nfct)
- static void death_by_timeout(unsigned long ul_conntrack)
- {
- 	struct nf_conn *ct = (void *)ul_conntrack;
-+	struct nf_conn_help *help = nfct_help(ct);
-+
-+	if (help && help->helper && help->helper->destroy)
-+		help->helper->destroy(ct);
- 
- 	write_lock_bh(&nf_conntrack_lock);
- 	/* Inside lock so preempt is disabled on module removal path.
-diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
-index 3c80558..b53bc64 100644
---- a/net/netfilter/nf_conntrack_proto_sctp.c
-+++ b/net/netfilter/nf_conntrack_proto_sctp.c
-@@ -469,7 +469,8 @@ static int sctp_new(struct nf_conn *conntrack, const struct sk_buff *skb,
- 					 SCTP_CONNTRACK_NONE, sch->type);
- 
- 		/* Invalid: delete conntrack */
--		if (newconntrack == SCTP_CONNTRACK_MAX) {
-+		if (newconntrack == SCTP_CONNTRACK_NONE ||
-+		    newconntrack == SCTP_CONNTRACK_MAX) {
- 			DEBUGP("nf_conntrack_sctp: invalid new deleting.\n");
- 			return 0;
- 		}
-diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
-index de889f2..a86f36b 100644
---- a/net/sched/sch_prio.c
-+++ b/net/sched/sch_prio.c
-@@ -74,7 +74,7 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
- 		band = res.classid;
- 	}
- 	band = TC_H_MIN(band) - 1;
--	if (band > q->bands)
-+	if (band >= q->bands)
- 		return q->queues[q->prio2band[0]];
- 
- 	return q->queues[band];
-diff --git a/net/sctp/socket.c b/net/sctp/socket.c
-index a1d026f..843c928 100644
---- a/net/sctp/socket.c
-+++ b/net/sctp/socket.c
-@@ -3847,7 +3847,7 @@ static int sctp_getsockopt_peer_addrs(struct sock *sk, int len,
- 		memcpy(&temp, &from->ipaddr, sizeof(temp));
- 		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp);
- 		addrlen = sctp_get_af_specific(sk->sk_family)->sockaddr_len;
--		if(space_left < addrlen)
-+		if (space_left < addrlen)
- 			return -ENOMEM;
- 		if (copy_to_user(to, &temp, addrlen))
- 			return -EFAULT;
-@@ -3936,8 +3936,9 @@ done:
- /* Helper function that copies local addresses to user and returns the number
-  * of addresses copied.
-  */
--static int sctp_copy_laddrs_to_user_old(struct sock *sk, __u16 port, int max_addrs,
--					void __user *to)
-+static int sctp_copy_laddrs_old(struct sock *sk, __u16 port,
-+					int max_addrs, void *to,
-+					int *bytes_copied)
- {
- 	struct list_head *pos, *next;
- 	struct sctp_sockaddr_entry *addr;
-@@ -3954,10 +3955,10 @@ static int sctp_copy_laddrs_to_user_old(struct sock *sk, __u16 port, int max_add
- 		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sctp_sk(sk),
- 								&temp);
- 		addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
--		if (copy_to_user(to, &temp, addrlen))
--			return -EFAULT;
-+		memcpy(to, &temp, addrlen);
- 
- 		to += addrlen;
-+		*bytes_copied += addrlen;
- 		cnt ++;
- 		if (cnt >= max_addrs) break;
- 	}
-@@ -3965,8 +3966,8 @@ static int sctp_copy_laddrs_to_user_old(struct sock *sk, __u16 port, int max_add
- 	return cnt;
- }
- 
--static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port,
--				    void __user **to, size_t space_left)
-+static int sctp_copy_laddrs(struct sock *sk, __u16 port, void *to,
-+			    size_t space_left, int *bytes_copied)
- {
- 	struct list_head *pos, *next;
- 	struct sctp_sockaddr_entry *addr;
-@@ -3983,14 +3984,14 @@ static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port,
- 		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sctp_sk(sk),
- 								&temp);
- 		addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
--		if(space_left<addrlen)
-+		if (space_left < addrlen)
- 			return -ENOMEM;
--		if (copy_to_user(*to, &temp, addrlen))
--			return -EFAULT;
-+		memcpy(to, &temp, addrlen);
- 
--		*to += addrlen;
-+		to += addrlen;
- 		cnt ++;
- 		space_left -= addrlen;
-+		bytes_copied += addrlen;
- 	}
- 
- 	return cnt;
-@@ -4014,6 +4015,9 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len,
- 	int addrlen;
- 	rwlock_t *addr_lock;
- 	int err = 0;
-+	void *addrs;
-+	void *buf;
-+	int bytes_copied = 0;
- 
- 	if (len != sizeof(struct sctp_getaddrs_old))
- 		return -EINVAL;
-@@ -4041,6 +4045,15 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len,
- 
- 	to = getaddrs.addrs;
- 
-+	/* Allocate space for a local instance of packed array to hold all
-+	 * the data.  We store addresses here first and then put write them
-+	 * to the user in one shot.
-+	 */
-+	addrs = kmalloc(sizeof(union sctp_addr) * getaddrs.addr_num,
-+			GFP_KERNEL);
-+	if (!addrs)
-+		return -ENOMEM;
-+
- 	sctp_read_lock(addr_lock);
- 
- 	/* If the endpoint is bound to 0.0.0.0 or ::0, get the valid
-@@ -4050,38 +4063,42 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len,
- 		addr = list_entry(bp->address_list.next,
- 				  struct sctp_sockaddr_entry, list);
- 		if (sctp_is_any(&addr->a)) {
--			cnt = sctp_copy_laddrs_to_user_old(sk, bp->port,
--							   getaddrs.addr_num,
--							   to);
--			if (cnt < 0) {
--				err = cnt;
--				goto unlock;
--			}
-+			cnt = sctp_copy_laddrs_old(sk, bp->port,
-+						   getaddrs.addr_num,
-+						   addrs, &bytes_copied);
- 			goto copy_getaddrs;
- 		}
- 	}
- 
-+	buf = addrs;
- 	list_for_each(pos, &bp->address_list) {
- 		addr = list_entry(pos, struct sctp_sockaddr_entry, list);
- 		memcpy(&temp, &addr->a, sizeof(temp));
- 		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp);
- 		addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
--		if (copy_to_user(to, &temp, addrlen)) {
--			err = -EFAULT;
--			goto unlock;
--		}
--		to += addrlen;
-+		memcpy(buf, &temp, addrlen);
-+		buf += addrlen;
-+		bytes_copied += addrlen;
- 		cnt ++;
- 		if (cnt >= getaddrs.addr_num) break;
- 	}
- 
- copy_getaddrs:
-+	sctp_read_unlock(addr_lock);
-+
-+	/* copy the entire address list into the user provided space */
-+	if (copy_to_user(to, addrs, bytes_copied)) {
-+		err = -EFAULT;
-+		goto error;
-+	}
-+
-+	/* copy the leading structure back to user */
- 	getaddrs.addr_num = cnt;
- 	if (copy_to_user(optval, &getaddrs, sizeof(struct sctp_getaddrs_old)))
- 		err = -EFAULT;
- 
--unlock:
--	sctp_read_unlock(addr_lock);
-+error:
-+	kfree(addrs);
- 	return err;
- }
- 
-@@ -4101,7 +4118,9 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len,
- 	rwlock_t *addr_lock;
- 	int err = 0;
- 	size_t space_left;
--	int bytes_copied;
-+	int bytes_copied = 0;
-+	void *addrs;
-+	void *buf;
- 
- 	if (len <= sizeof(struct sctp_getaddrs))
- 		return -EINVAL;
-@@ -4129,6 +4148,9 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len,
- 	to = optval + offsetof(struct sctp_getaddrs,addrs);
- 	space_left = len - sizeof(struct sctp_getaddrs) -
- 			 offsetof(struct sctp_getaddrs,addrs);
-+	addrs = kmalloc(space_left, GFP_KERNEL);
-+	if (!addrs)
-+		return -ENOMEM;
- 
- 	sctp_read_lock(addr_lock);
- 
-@@ -4139,41 +4161,47 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len,
- 		addr = list_entry(bp->address_list.next,
- 				  struct sctp_sockaddr_entry, list);
- 		if (sctp_is_any(&addr->a)) {
--			cnt = sctp_copy_laddrs_to_user(sk, bp->port,
--						       &to, space_left);
-+			cnt = sctp_copy_laddrs(sk, bp->port, addrs,
-+						space_left, &bytes_copied);
- 			if (cnt < 0) {
- 				err = cnt;
--				goto unlock;
-+				goto error;
- 			}
- 			goto copy_getaddrs;
- 		}
- 	}
- 
-+	buf = addrs;
- 	list_for_each(pos, &bp->address_list) {
- 		addr = list_entry(pos, struct sctp_sockaddr_entry, list);
- 		memcpy(&temp, &addr->a, sizeof(temp));
- 		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp);
- 		addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
--		if(space_left < addrlen)
--			return -ENOMEM; /*fixme: right error?*/
--		if (copy_to_user(to, &temp, addrlen)) {
--			err = -EFAULT;
--			goto unlock;
-+		if (space_left < addrlen) {
-+			err =  -ENOMEM; /*fixme: right error?*/
-+			goto error;
- 		}
--		to += addrlen;
-+		memcpy(buf, &temp, addrlen);
-+		buf += addrlen;
-+		bytes_copied += addrlen;
- 		cnt ++;
- 		space_left -= addrlen;
- 	}
- 
- copy_getaddrs:
-+	sctp_read_unlock(addr_lock);
-+
-+	if (copy_to_user(to, addrs, bytes_copied)) {
-+		err = -EFAULT;
-+		goto error;
-+	}
- 	if (put_user(cnt, &((struct sctp_getaddrs __user *)optval)->addr_num))
- 		return -EFAULT;
--	bytes_copied = ((char __user *)to) - optval;
- 	if (put_user(bytes_copied, optlen))
- 		return -EFAULT;
- 
--unlock:
--	sctp_read_unlock(addr_lock);
-+error:
-+	kfree(addrs);
- 	return err;
- }
- 
-@@ -4961,7 +4989,12 @@ int sctp_inet_listen(struct socket *sock, int backlog)
- 	/* Allocate HMAC for generating cookie. */
- 	if (sctp_hmac_alg) {
- 		tfm = crypto_alloc_hash(sctp_hmac_alg, 0, CRYPTO_ALG_ASYNC);
--		if (!tfm) {
-+		if (IS_ERR(tfm)) {
-+			if (net_ratelimit()) {
-+				printk(KERN_INFO
-+				       "SCTP: failed to load transform for %s: %ld\n",
-+					sctp_hmac_alg, PTR_ERR(tfm));
-+			}
- 			err = -ENOSYS;
- 			goto out;
- 		}
-diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
-index db298b5..c678f5f 100644
---- a/net/sunrpc/auth_gss/svcauth_gss.c
-+++ b/net/sunrpc/auth_gss/svcauth_gss.c
-@@ -1196,13 +1196,7 @@ svcauth_gss_wrap_resp_integ(struct svc_rqst *rqstp)
- 	if (xdr_buf_subsegment(resbuf, &integ_buf, integ_offset,
- 				integ_len))
- 		BUG();
--	if (resbuf->page_len == 0
--			&& resbuf->head[0].iov_len + RPC_MAX_AUTH_SIZE
--			< PAGE_SIZE) {
--		BUG_ON(resbuf->tail[0].iov_len);
--		/* Use head for everything */
--		resv = &resbuf->head[0];
--	} else if (resbuf->tail[0].iov_base == NULL) {
-+	if (resbuf->tail[0].iov_base == NULL) {
- 		if (resbuf->head[0].iov_len + RPC_MAX_AUTH_SIZE > PAGE_SIZE)
- 			goto out_err;
- 		resbuf->tail[0].iov_base = resbuf->head[0].iov_base
-diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
-index 785c3e3..ba89293 100644
---- a/net/xfrm/xfrm_policy.c
-+++ b/net/xfrm/xfrm_policy.c
-@@ -782,6 +782,10 @@ struct xfrm_policy *xfrm_policy_byid(u8 type, int dir, u32 id, int delete,
- 	struct hlist_head *chain;
- 	struct hlist_node *entry;
- 
-+	*err = -ENOENT;
-+	if (xfrm_policy_id2dir(id) != dir)
-+		return NULL;
-+
- 	*err = 0;
- 	write_lock_bh(&xfrm_policy_lock);
- 	chain = xfrm_policy_byidx + idx_hash(id);
-diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
-index 6bc7e7c..8912c0f 100644
---- a/scripts/basic/fixdep.c
-+++ b/scripts/basic/fixdep.c
-@@ -249,6 +249,8 @@ void parse_config_file(char *map, size_t len)
- 	found:
- 		if (!memcmp(q - 7, "_MODULE", 7))
- 			q -= 7;
-+		if( (q-p-7) < 0 )
-+			continue;
- 		use_config(p+7, q-p-7);
- 	}
- }
-diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
-index c94291b..a6f8992 100644
---- a/sound/pci/hda/patch_sigmatel.c
-+++ b/sound/pci/hda/patch_sigmatel.c
-@@ -1751,6 +1751,7 @@ static int stac92xx_resume(struct hda_codec *codec)
- 
- 	stac92xx_init(codec);
- 	stac92xx_set_config_regs(codec);
-+	snd_hda_resume_ctls(codec, spec->mixer);
- 	for (i = 0; i < spec->num_mixers; i++)
- 		snd_hda_resume_ctls(codec, spec->mixers[i]);
- 	if (spec->multiout.dig_out_nid)
diff --git a/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch b/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch
deleted file mode 100755
index 40ed7f4605..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/pcap-ts.patch
+++ /dev/null
@@ -1,363 +0,0 @@
-Index: linux-2.6.21/drivers/input/touchscreen/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/input/touchscreen/Kconfig	2007-08-31 22:27:48.000000000 -0300
-+++ linux-2.6.21/drivers/input/touchscreen/Kconfig	2007-08-31 23:06:39.000000000 -0300
-@@ -164,4 +164,13 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ucb1400_ts.
- 
-+config TOUCHSCREEN_PCAP
-+	tristate "Motorola PCAP touchscreen"
-+	depends on EZX_PCAP
-+	help
-+	  Say Y here if you have a Motorola EZX telephone and
-+	  want to support the built-in touchscreen.
-+
-+	  If unsure, say N.
-+
- endif
-Index: linux-2.6.21/drivers/input/touchscreen/pcap_ts.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/input/touchscreen/pcap_ts.c	2007-08-31 23:57:56.000000000 -0300
-@@ -0,0 +1,331 @@
-+/*
-+ * pcap_ts.c - Touchscreen driver for Motorola PCAP2 based touchscreen as found
-+ * 	       in the EZX phone platform.
-+ *
-+ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
-+ *  Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com>
-+ *
-+ *  Based on information found in the original Motorola 2.4.x ezx-ts.c driver.
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ * TODO:
-+ * 	split this in a hardirq handler and a tasklet/bh
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/string.h>
-+#include <linux/pm.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/input.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+
-+#if 0
-+#define DEBUGP(x, args ...) printk(x, ## args)
-+#else
-+#define DEBUGP(x, args ...)
-+#endif
-+
-+#define POSITION_X_MEASUREMENT	0
-+#define POSITION_XY_MEASUREMENT	1
-+#define PRESSURE_MEASUREMENT	2
-+#define PLATE_X_MEASUREMENT	3
-+#define PLATE_Y_MEASUREMENT	4
-+#define STANDBY_MODE		5
-+#define NONTS_MODE		6
-+
-+struct pcap_ts {
-+	int irq_xy;
-+	int irq_touch;
-+	struct input_dev *input;
-+	struct timer_list timer;
-+	u_int16_t x, y;
-+	u_int16_t pressure;
-+	u_int8_t read_state;
-+};
-+
-+#define X_AXIS_MIN	0
-+#define X_AXIS_MAX	1023
-+
-+#define Y_AXIS_MAX	X_AXIS_MAX
-+#define Y_AXIS_MIN	X_AXIS_MIN
-+
-+#define PRESSURE_MAX	X_AXIS_MAX
-+#define PRESSURE_MIN	X_AXIS_MIN
-+
-+/* if we try to read faster, pressure reading becomes unreliable */
-+#define SAMPLE_INTERVAL		(HZ/50)
-+
-+
-+static void pcap_ts_mode(struct pcap_ts *pcap_ts, u_int32_t mode)
-+{
-+	u_int32_t tmp;
-+
-+	pcap_ts->read_state = mode;
-+	ezx_pcap_read(PCAP_REG_ADC1, &tmp);
-+	tmp &= ~PCAP_ADC1_TS_M_MASK;
-+	tmp |= ((mode << PCAP_ADC1_TS_M_SHIFT) & PCAP_ADC1_TS_M_MASK);
-+	ezx_pcap_write(PCAP_REG_ADC1, tmp);
-+}
-+
-+/* issue a XY read command to the ADC of PCAP2.  Well get an ADCDONE interrupt
-+ * once the result of the conversion is available */
-+static void pcap_ts_start_xy_read(struct pcap_ts *pcap_ts)
-+{
-+	u_int32_t tmp;
-+
-+	ezx_pcap_read(PCAP_REG_ADC1, &tmp);
-+	tmp &= ~(PCAP_BIT_ADC1_RAND | PCAP_ADC1_ADA1_MASK |
-+					PCAP_ADC1_ADA2_MASK);
-+	tmp |= (PCAP_BIT_ADC1_ADEN | PCAP_BIT_ADC1_AD_SEL1 |
-+		PCAP_BIT_ADC1_AD_SEL2 | (5 << PCAP_ADC1_ADA1_SHIFT) |
-+					(3 << PCAP_ADC1_ADA2_SHIFT));
-+	ezx_pcap_write(PCAP_REG_ADC1, tmp);
-+	ezx_pcap_bit_set(PCAP_BIT_ADC2_ASC, 1);
-+}
-+
-+/* read the XY result from the ADC of PCAP2 */
-+static void pcap_ts_get_xy_value(struct pcap_ts *pcap_ts)
-+{
-+	u_int32_t tmp;
-+
-+	ezx_pcap_read(PCAP_REG_ADC2, &tmp);
-+
-+	if (pcap_ts->read_state == POSITION_XY_MEASUREMENT) {
-+		pcap_ts->x = (tmp & PCAP_ADC2_ADD1_MASK) >>
-+					PCAP_ADC2_ADD1_SHIFT;
-+		pcap_ts->y = (tmp & PCAP_ADC2_ADD2_MASK) >>
-+					PCAP_ADC2_ADD2_SHIFT;
-+	} else {
-+		pcap_ts->pressure = (tmp & PCAP_ADC2_ADD2_MASK) >>
-+						PCAP_ADC2_ADD2_SHIFT;
-+	}
-+}
-+
-+/* PCAP2 interrupts us when ADC conversion result is available */
-+static irqreturn_t pcap_ts_irq_xy(int irq, void *dev_id)
-+{
-+	struct pcap_ts *pcap_ts = dev_id;
-+
-+	pcap_ts_get_xy_value(pcap_ts);
-+	DEBUGP(KERN_DEBUG "%s X=%4d, Y=%4d Z=%4d ",
-+		pcap_ts->read_state == POSITION_XY_MEASUREMENT ? "COORD" :
-+			"PRESS", pcap_ts->x, pcap_ts->y, pcap_ts->pressure);
-+	switch (pcap_ts->read_state) {
-+	case PRESSURE_MEASUREMENT:
-+		if (pcap_ts->pressure >= PRESSURE_MAX ||
-+		     pcap_ts->pressure <= PRESSURE_MIN ) {
-+			/* pen has been released (or cant read pressure - WM)*/
-+			DEBUGP("UP\n");
-+			/* do nothing */
-+		} else {
-+			/* pen has been touched down */
-+			DEBUGP("DOWN\n");
-+			input_report_key(pcap_ts->input, BTN_TOUCH, 1);
-+			input_report_abs(pcap_ts->input, ABS_PRESSURE, pcap_ts->pressure);
-+		}
-+		/* switch state machine into coordinate read mode */
-+		pcap_ts_mode(pcap_ts, POSITION_XY_MEASUREMENT);
-+		pcap_ts_start_xy_read(pcap_ts);
-+		break;
-+	case POSITION_XY_MEASUREMENT:
-+		if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
-+		    pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
-+			/* pen has been released */
-+			DEBUGP("UP END\n");
-+
-+			input_report_key(pcap_ts->input, BTN_TOUCH, 0);
-+			input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
-+
-+			/* no need for timer, we'll get interrupted with
-+			 * next touch down event */
-+			del_timer(&pcap_ts->timer);
-+
-+			/* ask PCAP2 to interrupt us if touch event happens
-+			 * again */
-+			pcap_ts_mode(pcap_ts, STANDBY_MODE);
-+			enable_irq(pcap_ts->irq_touch);
-+		} else {
-+			DEBUGP("DOWN\n");
-+			input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
-+			input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
-+
-+			/* switch back to pressure read mode */
-+			pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT);
-+			mod_timer(&pcap_ts->timer, jiffies + SAMPLE_INTERVAL);
-+		}
-+		input_sync(pcap_ts->input);
-+		break;
-+	default:
-+		DEBUGP("ERROR\n");
-+		break;
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+/* PCAP2 interrupts us if the pen touches down (interrupts also on pen up - WM)*/
-+static irqreturn_t pcap_ts_irq_touch(int irq, void *dev_id)
-+{
-+	struct pcap_ts *pcap_ts = dev_id;
-+	/* mask Touchscreen interrupt bit, prevents further touch events
-+	 * from being reported to us until we're finished with reading
-+	 * both pressure and x/y from ADC */
-+	disable_irq(pcap_ts->irq_touch);
-+
-+	DEBUGP("touched!!\n");
-+	pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT);
-+	pcap_ts_start_xy_read(pcap_ts);
-+	return IRQ_HANDLED;
-+}
-+
-+static void pcap_ts_timer_fn(unsigned long data)
-+{
-+	struct pcap_ts *pcap_ts = (struct pcap_ts *) data;
-+
-+	pcap_ts_start_xy_read(pcap_ts);
-+}
-+
-+static int __init ezxts_probe(struct platform_device *pdev)
-+{
-+	struct pcap_ts *pcap_ts;
-+	struct input_dev *input_dev;
-+	int err = -ENOMEM;
-+
-+	pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
-+	input_dev = input_allocate_device();
-+	if (!pcap_ts || !input_dev)
-+		goto fail;
-+
-+	pcap_ts->irq_xy = platform_get_irq(pdev, 0);
-+	if (pcap_ts->irq_xy < 0) {
-+		err = pcap_ts->irq_xy;
-+		goto fail;
-+	}
-+
-+	pcap_ts->irq_touch = platform_get_irq(pdev, 1);
-+	if (pcap_ts->irq_touch < 0) {
-+		err = pcap_ts->irq_touch;
-+		goto fail;
-+	}
-+
-+	ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REFENB, 0);
-+	pcap_ts_mode(pcap_ts, STANDBY_MODE);
-+
-+	err = request_irq(pcap_ts->irq_xy, pcap_ts_irq_xy, SA_INTERRUPT,
-+			  "pcap-ts X/Y", pcap_ts);
-+	if (err < 0) {
-+		printk(KERN_ERR "pcap_ts: can't grab xy irq %d: %d\n",
-+		       pcap_ts->irq_xy, err);
-+		goto fail;
-+	}
-+
-+	err = request_irq(pcap_ts->irq_touch, pcap_ts_irq_touch, SA_INTERRUPT,
-+			  "pcap-ts touch", pcap_ts);
-+	if (err < 0) {
-+		printk(KERN_ERR "pcap_ts: can't grab touch irq %d: %d\n",
-+		       pcap_ts->irq_touch, err);
-+		goto fail_xy;
-+	}
-+
-+	pcap_ts->input = input_dev;
-+	init_timer(&pcap_ts->timer);
-+	pcap_ts->timer.data = (unsigned long) pcap_ts;
-+	pcap_ts->timer.function = &pcap_ts_timer_fn;
-+
-+	platform_set_drvdata(pdev, pcap_ts);
-+
-+	input_dev->name = "pcap-touchscreen";
-+	input_dev->phys = "ezxts/input0";
-+	input_dev->id.bustype = BUS_HOST;
-+	input_dev->id.vendor = 0x0001;
-+	input_dev->id.product = 0x0002;
-+	input_dev->id.version = 0x0100;
-+	input_dev->cdev.dev = &pdev->dev;
-+	input_dev->private = pcap_ts;
-+
-+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-+	input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
-+	input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
-+	input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
-+			     PRESSURE_MAX, 0, 0);
-+
-+	input_register_device(pcap_ts->input);
-+
-+	return 0;
-+
-+fail_xy:
-+	free_irq(pcap_ts->irq_xy, pcap_ts);
-+fail:
-+	input_free_device(input_dev);
-+	kfree(pcap_ts);
-+
-+	return err;
-+}
-+
-+static int ezxts_remove(struct platform_device *pdev)
-+{
-+	struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
-+
-+	del_timer_sync(&pcap_ts->timer);
-+
-+	free_irq(pcap_ts->irq_touch, pcap_ts);
-+	free_irq(pcap_ts->irq_xy, pcap_ts);
-+
-+	input_unregister_device(pcap_ts->input);
-+	kfree(pcap_ts);
-+
-+	return 0;
-+}
-+
-+static int ezxts_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 1);
-+        return 0;
-+}
-+
-+static int ezxts_resume(struct platform_device *dev)
-+{
-+	ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 0);
-+	/* just in case we suspend with TSI masked. */
-+//	ezx_pcap_bit_set(PCAP_BIT_MSR_TSM, 0);
-+        return 0;
-+}
-+
-+
-+static struct platform_driver ezxts_driver = {
-+	.probe		= ezxts_probe,
-+	.remove		= ezxts_remove,
-+	.suspend	= ezxts_suspend,
-+	.resume		= ezxts_resume,
-+	.driver		= {
-+		.name	= "pcap-ts",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init ezxts_init(void)
-+{
-+	return platform_driver_register(&ezxts_driver);
-+}
-+
-+static void __exit ezxts_exit(void)
-+{
-+	platform_driver_unregister(&ezxts_driver);
-+}
-+
-+module_init(ezxts_init);
-+module_exit(ezxts_exit);
-+
-+MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
-+MODULE_AUTHOR("Harald Welte <laforge@openezx.org>");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/drivers/input/touchscreen/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/input/touchscreen/Makefile	2007-08-31 22:27:48.000000000 -0300
-+++ linux-2.6.21/drivers/input/touchscreen/Makefile	2007-08-31 23:06:39.000000000 -0300
-@@ -16,3 +16,4 @@
- obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
- obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
-+obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
diff --git a/packages/linux/linux-ezx-2.6.21/patches/pxa-kbd.patch b/packages/linux/linux-ezx-2.6.21/patches/pxa-kbd.patch
deleted file mode 100755
index 425a5b984c..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/pxa-kbd.patch
+++ /dev/null
@@ -1,534 +0,0 @@
-Index: linux-2.6.21/arch/arm/mach-pxa/generic.c
-===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/generic.c	2007-06-01 20:04:10.000000000 +0200
-+++ linux-2.6.21/arch/arm/mach-pxa/generic.c	2007-06-01 20:04:45.000000000 +0200
-@@ -42,6 +42,7 @@
- #include <asm/arch/mmc.h>
- #include <asm/arch/irda.h>
- #include <asm/arch/i2c.h>
-+#include <asm/arch/kbd.h>
- 
- #include "generic.h"
- 
-@@ -430,6 +431,30 @@
- 	.id		= -1,
- };
- 
-+static struct resource pxa_kbd_resources[] = {
-+	{
-+		.start	= IRQ_KEYPAD,
-+		.end	= IRQ_KEYPAD,
-+		.flags	= IORESOURCE_IRQ,
-+	}, {
-+		.start	= 0x41500000,
-+		.end	= 0x4150004c,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device kbd_device = {
-+	.name		= "pxa-keyboard",
-+	.id		= -1,
-+	.resource	= pxa_kbd_resources,
-+	.num_resources	= ARRAY_SIZE(pxa_kbd_resources),
-+};
-+
-+void __init pxa_set_kbd_info(struct pxakbd_platform_data *info)
-+{
-+	kbd_device.dev.platform_data = info;
-+}
-+
- static struct platform_device *devices[] __initdata = {
- 	&pxamci_device,
- 	&udc_device,
-@@ -444,6 +469,7 @@
- #endif
- 	&i2s_device,
- 	&pxartc_device,
-+	&kbd_device,
- };
- 
- static int __init pxa_init(void)
-Index: linux-2.6.21/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.21.orig/drivers/input/keyboard/Kconfig	2007-06-01 20:04:10.000000000 +0200
-+++ linux-2.6.21/drivers/input/keyboard/Kconfig	2007-06-01 20:04:45.000000000 +0200
-@@ -229,4 +229,11 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called gpio-keys.
- 
-+config KEYBOARD_PXA
-+	tristate "Intel PXA keyboard support"
-+	depends on ARCH_PXA
-+	help
-+	  This add support for a driver of the Intel PXA2xx keyboard
-+	  controller.
-+
- endif
-Index: linux-2.6.21/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.21.orig/drivers/input/keyboard/Makefile	2007-06-01 20:04:10.000000000 +0200
-+++ linux-2.6.21/drivers/input/keyboard/Makefile	2007-06-01 20:04:45.000000000 +0200
-@@ -19,4 +19,4 @@
- obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
- obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
- obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
--
-+obj-$(CONFIG_KEYBOARD_PXA)		+= pxakbd.o
-Index: linux-2.6.21/include/asm-arm/arch-pxa/kbd.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/include/asm-arm/arch-pxa/kbd.h	2007-06-01 20:04:45.000000000 +0200
-@@ -0,0 +1,28 @@
-+/*
-+ *  kbd_pxa.h
-+ *
-+ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef _KBD_PXA_H_
-+#define _KBD_PXA_H_
-+
-+struct pxakbd_platform_data {
-+	int (*init)(void);			/* init gpio, etc. */
-+	unsigned int scan_interval;
-+	struct {
-+		unsigned int rows;
-+		unsigned int cols;
-+		unsigned char *keycode;
-+	} matrix;
-+	struct {
-+		unsigned int num;
-+		unsigned char *keycode;
-+	} direct;
-+};
-+
-+#endif
-Index: linux-2.6.21/drivers/input/keyboard/pxakbd.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/drivers/input/keyboard/pxakbd.c	2007-06-02 10:41:13.000000000 +0200
-@@ -0,0 +1,403 @@
-+/*
-+ * Driver for Motorola EZX phone "keyboard"
-+ *
-+ * (C) 2006 by Harald Welte <laforge@openezx.org>
-+ *
-+ * May, 2007 - Daniel Ribeiro <drwyrm@gmail.com>
-+ * 		pm callbacks
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/input.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+#include <asm/arch/kbd.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#if 0
-+#define DEBUGP(x, args ...) printk(x, ## args)
-+#else
-+#define DEBUGP(x, args ...)
-+#endif
-+
-+/* per-keyboard private data structure */
-+struct pxakbd {
-+	struct input_dev *input;
-+	struct timer_list timer;
-+	spinlock_t lock;
-+
-+	struct resource *res;
-+	unsigned int irq;
-+	u_int32_t kpc;
-+	u_int32_t kpkdi;
-+
-+	struct pxakbd_platform_data *pd;
-+};
-+
-+static int pxakbd_scan_direct(struct pxakbd *pxakbd)
-+{
-+	u_int32_t kpdk;
-+	unsigned int i;
-+	int num_pressed = 0;
-+
-+	kpdk = KPDK & 0x000000ff;
-+	for (i = 0; i < pxakbd->pd->direct.num; i++) {
-+		int pressed = 0;
-+
-+		if (kpdk & (1 << i)) {
-+			pressed = 1;
-+			num_pressed++;
-+			DEBUGP("pxakbd: pressed: direct %u\n", i);
-+		}
-+		if (pxakbd->pd->direct.keycode[i] != KEY_RESERVED) {
-+			DEBUGP( "pxakbd: sending to input layer: keycode = %d, pressed = %d\n", pxakbd->pd->direct.keycode[i], pressed );
-+			input_report_key(pxakbd->input, pxakbd->pd->direct.keycode[i],
-+			pressed);
-+		}
-+	}
-+	return num_pressed;
-+}
-+
-+/* read the full 8x8 matrix from the PXA27x keypad controller */
-+static inline void __read_matrix(u_int8_t *matrix)
-+{
-+	u_int32_t tmp;
-+	u_int8_t row;
-+
-+	/* Fill the matrix by rows */
-+
-+	tmp = KPASMKP0;
-+	for (row=0; row<8; row++) {
-+		/* zero the matrix on the first time, then keep ORing */
-+		matrix[row] = ((tmp >> row) & 1);
-+		matrix[row] |= ((tmp >> (16 + row)) & 1) << 1;
-+	}
-+
-+	tmp = KPASMKP1;
-+	for (row=0; row<8; row++) {
-+		matrix[row] |= ((tmp >> row) & 1) << 2;
-+		matrix[row] |= ((tmp >> (16 + row)) & 1) << 3;
-+	}
-+
-+	tmp = KPASMKP2;
-+	for (row=0; row<8; row++) {
-+		matrix[row] |= ((tmp >> row) & 1) << 4;
-+		matrix[row] |= ((tmp >> (16 + row)) & 1) << 5;
-+	}
-+
-+	tmp = KPASMKP3;
-+	for (row=0; row<8; row++) {
-+		matrix[row] |= ((tmp >> row) & 1) << 6;
-+		matrix[row] |= ((tmp >> (16 + row)) & 1) << 7;
-+	}
-+}
-+
-+/* compare current matrix with last, generate 'diff' events */
-+static int __cmp_matrix_gen_events(struct pxakbd *pxakbd, u_int8_t *matrix)
-+{
-+	unsigned int i;
-+	int num_pressed = 0;
-+
-+	/* iterate over the matrix */
-+	for (i = 0; i < pxakbd->pd->matrix.rows; i++) {
-+		unsigned int j;
-+		for (j = 0; j < pxakbd->pd->matrix.cols; j++) {
-+			u_int32_t scancode =
-+				(i * pxakbd->pd->matrix.cols) + j;
-+			int pressed = matrix[i] & (1 << j);
-+
-+			if (pressed) {
-+				DEBUGP("pxakbd: pressed: %u/%u\n", i, j);
-+				num_pressed++;
-+			}
-+
-+			input_report_key(pxakbd->input,
-+					 pxakbd->pd->matrix.keycode[scancode], pressed);
-+		}
-+	}
-+
-+	return num_pressed;
-+}
-+
-+/* scan the matrix keypad */
-+static int pxakbd_scan_matrix(struct pxakbd *pxakbd)
-+{
-+	int num_pressed;
-+	u_int32_t kpas;
-+	u_int8_t matrix[8];
-+
-+	kpas = KPAS;
-+
-+	if ((kpas & KPAS_MUKP) == KPAS_MUKP_NONE) {
-+		/* no keys pressed */
-+		memset(matrix, 0, sizeof(matrix));
-+	} else if ((kpas & KPAS_MUKP) == KPAS_MUKP_ONE) {
-+		/* one key pressed */
-+		u_int8_t row = (kpas & KPAS_RP) >> 4;
-+		u_int8_t col = kpas & KPAS_CP;
-+
-+		if (row == 0x0f || col == 0x0f) {
-+			printk(KERN_WARNING "pxakbd: col or row invalid!\n");
-+			return -1;
-+		}
-+
-+		/* clear the matrix and set the single pressed key */
-+		memset(matrix, 0, sizeof(matrix));
-+		matrix[row] |= (1 << col);
-+	} else {
-+		/* multiple keys pressed */
-+		__read_matrix(matrix);
-+	}
-+
-+	num_pressed = __cmp_matrix_gen_events(pxakbd, matrix);
-+
-+	return num_pressed;
-+}
-+
-+static void pxakbd_timer_callback(unsigned long data)
-+{
-+	unsigned long flags;
-+	struct pxakbd *pxakbd = (struct pxakbd *) data;
-+	unsigned int num_pressed;
-+
-+	spin_lock_irqsave(&pxakbd->lock, flags);
-+
-+	num_pressed = pxakbd_scan_direct(pxakbd);
-+	num_pressed += pxakbd_scan_matrix(pxakbd);
-+
-+	spin_unlock_irqrestore(&pxakbd->lock, flags);
-+
-+	/* propagate events up the input stack */
-+	input_sync(pxakbd->input);
-+}
-+
-+static irqreturn_t pxakbd_interrupt(int irq, void *dummy)
-+{
-+	struct pxakbd *pxakbd = dummy;
-+	u_int32_t kpc;
-+	int handled = 0;
-+	int num_pressed = 0;
-+
-+	/* read and clear interrupt */
-+	kpc = KPC;
-+
-+	if (kpc & KPC_DI) {
-+		num_pressed += pxakbd_scan_direct(pxakbd);
-+		handled = 1;
-+	}
-+
-+	if (kpc & KPC_MI) {
-+		while (KPAS & KPAS_SO) {
-+			/* wait for scan to complete beforereading scan regs */
-+			cpu_relax();
-+		}
-+		num_pressed += pxakbd_scan_matrix(pxakbd);
-+		handled = 1;
-+	}
-+
-+	/* If any keys are currently pressed, we need to start the timer to detect
-+	 * key release. */
-+	if (num_pressed)
-+		mod_timer(&pxakbd->timer, jiffies + pxakbd->pd->scan_interval);
-+
-+	/* propagate events up the input stack */
-+	input_sync(pxakbd->input);
-+
-+	return IRQ_RETVAL(handled);
-+}
-+
-+static int __init pxakbd_probe(struct platform_device *pdev)
-+{
-+	struct pxakbd *pxakbd;
-+	struct input_dev *input_dev;
-+	struct resource *r;
-+	int i;
-+	int ret = -ENOMEM;
-+
-+	int rows, cols, n_direct;
-+
-+	if (!pdev->dev.platform_data) {
-+		printk(KERN_ERR "pxakbd: platform data not set\n");
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	pxakbd = kzalloc(sizeof(*pxakbd), GFP_KERNEL);
-+	if (!pxakbd)
-+		goto out;
-+
-+	input_dev = input_allocate_device();
-+	if (!input_dev)
-+		goto out_pxa;
-+
-+	spin_lock_init(&pxakbd->lock);
-+	pxakbd->irq = platform_get_irq(pdev, 0);
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!r || pxakbd->irq == NO_IRQ) {
-+		printk(KERN_ERR "pxakbd: invalid resources\n");
-+		ret = -EBUSY;
-+		goto out_idev;
-+	}
-+
-+	pxakbd->input = input_dev;
-+	init_timer(&pxakbd->timer);
-+	pxakbd->timer.function = pxakbd_timer_callback;
-+	pxakbd->timer.data = (unsigned long) pxakbd;
-+	pxakbd->pd = pdev->dev.platform_data;
-+	pxakbd->res = r;
-+
-+	rows = pxakbd->pd->matrix.rows;
-+	cols = pxakbd->pd->matrix.cols;
-+	n_direct = pxakbd->pd->direct.num;
-+
-+	input_dev->name = "pxa-keyboard";
-+	input_dev->phys = "pxakbd/input0";
-+	input_dev->id.bustype = BUS_HOST;
-+	input_dev->id.vendor = 0x0001;
-+	input_dev->id.product = 0x0001;
-+	input_dev->id.version = 0x0001;
-+	input_dev->cdev.dev = &pdev->dev;
-+	input_dev->private = pxakbd;
-+
-+	input_dev->evbit[0] = BIT(EV_KEY)|BIT(EV_REP);
-+
-+	input_dev->keycodesize = sizeof(unsigned char);
-+	input_dev->keycodemax = (rows*cols)+n_direct;
-+	input_dev->keycode = kmalloc(input_dev->keycodemax*input_dev->keycodesize,
-+		      GFP_KERNEL);
-+	if (!input_dev->keycode){
-+	       ret = -ENOMEM;
-+	       goto out_idev;
-+	}
-+
-+	memcpy(input_dev->keycode, pxakbd->pd->matrix.keycode, rows*cols);
-+
-+	memcpy(input_dev->keycode+(rows*cols),
-+		      pxakbd->pd->direct.keycode,
-+		      n_direct);
-+
-+	for (i = 0; i < rows*cols; i++)
-+		set_bit(pxakbd->pd->matrix.keycode[i], input_dev->keybit);
-+
-+	for (i = 0; i < n_direct; i++)
-+		set_bit(pxakbd->pd->direct.keycode[i], input_dev->keybit);
-+
-+	clear_bit(0, input_dev->keybit);
-+
-+	if (request_irq(pxakbd->irq, pxakbd_interrupt, 0, "pxakbd", pxakbd)) {
-+		printk(KERN_ERR "pxakbd: can't request irq %d\n", pxakbd->irq);
-+		ret = -EBUSY;
-+		goto out_idev;
-+	}
-+
-+	r = request_mem_region(r->start, 0x4c, "pxakbd");
-+	if (!r) {
-+		printk(KERN_ERR "pxakbd: can't request memregion\n");
-+		ret = -EBUSY;
-+		goto out_irq;
-+	}
-+
-+	/* set up gpio */
-+	pxakbd->pd->init();
-+
-+	/* set keypad control register */
-+	KPC = (KPC_ASACT |         /* automatic scan on activity */
-+		KPC_ME | KPC_DE |   /* matrix and direct keypad enabled */
-+		((pxakbd->pd->matrix.cols-1)<<23) | /* columns */
-+		((pxakbd->pd->matrix.rows-1)<<26) | /* rows */
-+		((pxakbd->pd->direct.num-1)<<6) | /* direct keys */
-+		KPC_MS_ALL); /* scan all columns */
-+
-+	pxa_set_cken(CKEN19_KEYPAD, 1);
-+
-+	KPC |= (KPC_DIE | KPC_MIE); /* enable matrix and direct keyboard */
-+
-+	KPKDI = 0x40;	/* matrix key debounce interval: 0x40 */
-+
-+	platform_set_drvdata(pdev, pxakbd);
-+
-+	return input_register_device(pxakbd->input);
-+
-+out_drvdata:
-+	platform_set_drvdata(pdev, NULL);
-+out_mem:
-+	release_resource(r);
-+out_irq:
-+	free_irq(pxakbd->irq, pxakbd);
-+out_idev:
-+	kfree(input_dev->keycode);
-+	input_free_device(input_dev);
-+out_pxa:
-+	kfree(pxakbd);
-+out:
-+	return ret;
-+}
-+
-+static int pxakbd_remove(struct platform_device *pdev)
-+{
-+	struct pxakbd *pxakbd = platform_get_drvdata(pdev);
-+
-+	kfree(pxakbd->input->keycode);
-+	input_unregister_device(pxakbd->input);
-+	platform_set_drvdata(pdev, NULL);
-+	release_resource(pxakbd->res);
-+	free_irq(pxakbd->irq, pxakbd);
-+	kfree(pxakbd);
-+
-+	return 0;
-+}
-+
-+static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+       struct pxakbd *pxakbd = platform_get_drvdata(pdev);
-+
-+       pxakbd->kpc = KPC;
-+       pxakbd->kpkdi = KPKDI;
-+
-+       return 0;
-+}
-+
-+static int pxakbd_resume(struct platform_device *pdev)
-+{
-+       struct pxakbd *pxakbd = platform_get_drvdata(pdev);
-+
-+       KPC = pxakbd->kpc;
-+       KPKDI = pxakbd->kpkdi;
-+
-+       return 0;
-+}
-+
-+static struct platform_driver pxakbd_driver = {
-+	.probe		= &pxakbd_probe,
-+	.remove		= &pxakbd_remove,
-+	.suspend	= &pxakbd_suspend,
-+	.resume		= &pxakbd_resume,
-+	.driver		= {
-+		.name	= "pxa-keyboard",
-+	},
-+};
-+
-+static int __devinit pxakbd_init(void)
-+{
-+	return platform_driver_register(&pxakbd_driver);
-+}
-+
-+static void __exit pxakbd_exit(void)
-+{
-+	platform_driver_unregister(&pxakbd_driver);
-+}
-+
-+module_init(pxakbd_init);
-+module_exit(pxakbd_exit);
-+
-+MODULE_AUTHOR("Harald Welte <laforge@openezx.org>");
-+MODULE_DESCRIPTION("Driver for Intel PXA27x keypad controller");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h
-===================================================================
---- linux-2.6.21.orig/include/asm-arm/arch-pxa/pxa-regs.h	2007-06-01 20:04:45.000000000 +0200
-+++ linux-2.6.21/include/asm-arm/arch-pxa/pxa-regs.h	2007-06-01 20:04:45.000000000 +0200
-@@ -2165,6 +2165,11 @@
- #define KPMK_MKP        (0x1 << 31)
- #define KPAS_SO         (0x1 << 31)
- #define KPASMKPx_SO     (0x1 << 31)
-+#define KPAS_RP		(0x000000f0)
-+#define KPAS_CP		(0x0000000f)
-+#define KPAS_MUKP	(0x7c000000)
-+#define KPAS_MUKP_ONE	(0x04000000)
-+#define KPAS_MUKP_NONE	(0x00000000)
- 
- /*
-  * UHC: USB Host Controller (OHCI-like) register definitions
diff --git a/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-fix-a1200.patch b/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-fix-a1200.patch
deleted file mode 100644
index 1dd6edd7c3..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-fix-a1200.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-This hack hardcodes pxa27x-udc to ether_gadget. This is just a temp workaround.
-Index: linux-2.6.21/drivers/usb/gadget/ether.c
-===================================================================
---- linux-2.6.21.orig/drivers/usb/gadget/ether.c	2007-09-23 09:32:51.000000000 -0300
-+++ linux-2.6.21/drivers/usb/gadget/ether.c	2007-09-23 09:32:52.000000000 -0300
-@@ -2697,10 +2697,16 @@
- MODULE_LICENSE ("GPL");
- 
- 
--static int __init init (void)
-+// Alex add FIXME
-+int usb_ether_init (void)
- {
- 	return usb_gadget_register_driver (&eth_driver);
- }
-+
-+static int __init init (void)
-+{
-+//	return usb_gadget_register_driver (&eth_driver);
-+}
- module_init (init);
- 
- static void __exit cleanup (void)
-Index: linux-2.6.21/drivers/usb/gadget/pxa27x_udc.c
-===================================================================
---- linux-2.6.21.orig/drivers/usb/gadget/pxa27x_udc.c	2007-09-23 09:32:51.000000000 -0300
-+++ linux-2.6.21/drivers/usb/gadget/pxa27x_udc.c	2007-09-23 09:32:52.000000000 -0300
-@@ -2227,6 +2227,8 @@
- 	udc_init_ep(udc);
- 	udc_reinit(udc);
- 
-+	usb_ether_init();  // Alex add FIXME
-+
- 	/* irq setup after old hardware state is cleaned up */
- 	retval = request_irq(IRQ_USB, pxa27x_udc_irq,
- 			SA_INTERRUPT, driver_name, udc);
diff --git a/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-support.2.patch b/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-support.2.patch
deleted file mode 100755
index d35e40f046..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/pxa27x-udc-support.2.patch
+++ /dev/null
@@ -1,3037 +0,0 @@
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index 4097a86..5d3ea6e 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -111,6 +111,24 @@ config USB_PXA2XX
- 	default USB_GADGET
- 	select USB_GADGET_SELECTED
- 
-+config USB_GADGET_PXA27X
-+	boolean "PXA 27x"
-+	depends on ARCH_PXA && PXA27x
-+	help
-+	   Intel's PXA 27x series XScale processors include an integrated
-+	   full speed USB 1.1 device controller.
-+
-+	   Say "y" to link the driver statically, or "m" to build a
-+	   dynamically linked module called "pxa2xx_udc" and force all
-+	   gadget drivers to also be dynamically linked.
-+
-+
-+config USB_PXA27X
-+	tristate
-+	depends on USB_GADGET_PXA27X
-+	default USB_GADGET
-+	select USB_GADGET_SELECTED
-+
- # if there's only one gadget driver, using only two bulk endpoints,
- # don't waste memory for the other endpoints
- config USB_PXA2XX_SMALL
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index e71e086..7e508a6 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -4,6 +4,7 @@
- obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
- obj-$(CONFIG_USB_NET2280)	+= net2280.o
- obj-$(CONFIG_USB_PXA2XX)	+= pxa2xx_udc.o
-+obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
- obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
- obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
- obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
-diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
-index f28af06..e7d72ff 100644
---- a/drivers/usb/gadget/epautoconf.c
-+++ b/drivers/usb/gadget/epautoconf.c
-@@ -230,7 +230,8 @@ find_ep (struct usb_gadget *gadget, const char *name)
-  */
- struct usb_ep * __devinit usb_ep_autoconfig (
- 	struct usb_gadget		*gadget,
--	struct usb_endpoint_descriptor	*desc
-+	struct usb_endpoint_descriptor	*desc,
-+	int config, int interface, int alt
- )
- {
- 	struct usb_ep	*ep;
-@@ -238,6 +239,11 @@ struct usb_ep * __devinit usb_ep_autoconfig (
- 
- 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
- 
-+	/* If have ep_alloc() function use it! */
-+	if (gadget->ops->ep_alloc)
-+		return gadget->ops->ep_alloc(gadget, desc,
-+					     config, interface, alt);
-+
- 	/* First, apply chip-specific "best usage" knowledge.
- 	 * This might make a good usb_gadget_ops hook ...
- 	 */
-diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
-index 04e6b85..bc6de31 100644
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -258,10 +258,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
- #define	DEV_CONFIG_CDC
- #endif
- 
--#ifdef CONFIG_USB_GADGET_PXA27X
--#define DEV_CONFIG_CDC
--#endif
--
- #ifdef CONFIG_USB_GADGET_S3C2410
- #define DEV_CONFIG_CDC
- #endif
-@@ -294,6 +290,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
- #define	DEV_CONFIG_SUBSET
- #endif
- 
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+#define DEV_CONFIG_SUBSET
-+#endif
-+
- #ifdef CONFIG_USB_GADGET_SA1100
- /* use non-CDC for backwards compatibility */
- #define	DEV_CONFIG_SUBSET
-@@ -2309,6 +2309,9 @@ eth_bind (struct usb_gadget *gadget)
- 		 * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
- 		 */
- 		cdc = 0;
-+	} else if (gadget_is_pxa27x(gadget)) {
-+		/* hardware can't write zlps */
-+		zlp = 0;
- 	}
- 
- 	gcnum = usb_gadget_controller_number (gadget);
-@@ -2375,7 +2378,22 @@ eth_bind (struct usb_gadget *gadget)
- 
- 	/* all we really need is bulk IN/OUT */
- 	usb_ep_autoconfig_reset (gadget);
--	in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
-+#ifdef CONFIG_USB_ETH_RNDIS 
-+	in_ep = usb_ep_autoconfig (gadget, &fs_source_desc,
-+				DEV_RNDIS_CONFIG_VALUE,
-+				(int)rndis_data_intf.bInterfaceNumber,
-+				(int)rndis_data_intf.bAlternateSetting);
-+#elif  defined(DEV_CONFIG_CDC)
-+	in_ep = usb_ep_autoconfig (gadget, &fs_source_desc,
-+				DEV_CONFIG_VALUE,
-+				(int)data_intf.bInterfaceNumber,
-+				(int)data_intf.bAlternateSetting);
-+#elif  defined(DEV_CONFIG_SUBSET)
-+	in_ep = usb_ep_autoconfig (gadget, &fs_source_desc,
-+				DEV_CONFIG_VALUE,
-+				(int)subset_data_intf.bInterfaceNumber,
-+				(int)subset_data_intf.bAlternateSetting);
-+#endif /* CONFIG_USB_ETH_RNDIS */
- 	if (!in_ep) {
- autoconf_fail:
- 		dev_err (&gadget->dev,
-@@ -2385,7 +2403,22 @@ autoconf_fail:
- 	}
- 	in_ep->driver_data = in_ep;	/* claim */
- 
--	out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
-+#ifdef CONFIG_USB_ETH_RNDIS
-+	out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc,
-+			DEV_RNDIS_CONFIG_VALUE,
-+			(int)rndis_data_intf.bInterfaceNumber,
-+			(int)rndis_data_intf.bAlternateSetting);
-+#elif  defined(DEV_CONFIG_CDC)
-+	out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)data_intf.bInterfaceNumber,
-+			(int)data_intf.bAlternateSetting);
-+#elif  defined(DEV_CONFIG_SUBSET)
-+	out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)subset_data_intf.bInterfaceNumber,
-+			(int)subset_data_intf.bAlternateSetting);
-+#endif /* CONFIG_USB_ETH_RNDIS */
- 	if (!out_ep)
- 		goto autoconf_fail;
- 	out_ep->driver_data = out_ep;	/* claim */
-@@ -2395,7 +2428,17 @@ autoconf_fail:
- 	 * Since some hosts expect one, try to allocate one anyway.
- 	 */
- 	if (cdc || rndis) {
--		status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
-+#ifdef CONFIG_USB_ETH_RNDIS
-+		status_ep = usb_ep_autoconfig (gadget, &fs_status_desc,
-+			DEV_RNDIS_CONFIG_VALUE,
-+			(int)rndis_control_intf.bInterfaceNumber,
-+			(int)rndis_control_intf.bAlternateSetting);
-+#elif  defined(DEV_CONFIG_CDC)
-+		status_ep = usb_ep_autoconfig (gadget, &fs_status_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)control_intf.bInterfaceNumber,
-+			(int)control_intf.bAlternateSetting);
-+#endif /* CONFIG_USB_ETH_RNDIS */
- 		if (status_ep) {
- 			status_ep->driver_data = status_ep;	/* claim */
- 		} else if (rndis) {
-@@ -2403,13 +2446,14 @@ autoconf_fail:
- 				"can't run RNDIS on %s\n",
- 				gadget->name);
- 			return -ENODEV;
-+		}
- #ifdef DEV_CONFIG_CDC
- 		/* pxa25x only does CDC subset; often used with RNDIS */
--		} else if (cdc) {
-+		else if (cdc) {
- 			control_intf.bNumEndpoints = 0;
- 			/* FIXME remove endpoint from descriptor list */
--#endif
- 		}
-+#endif
- 	}
- #endif
- 
-diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
-index c6b6479..6af5fdd 100644
---- a/drivers/usb/gadget/file_storage.c
-+++ b/drivers/usb/gadget/file_storage.c
-@@ -3920,20 +3920,20 @@ static int __init fsg_bind(struct usb_gadget *gadget)
- 
- 	/* Find all the endpoints we will use */
- 	usb_ep_autoconfig_reset(gadget);
--	ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc);
-+	ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc, 0, 0, 0);
- 	if (!ep)
- 		goto autoconf_fail;
- 	ep->driver_data = fsg;		// claim the endpoint
- 	fsg->bulk_in = ep;
- 
--	ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc);
-+	ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc, 0, 0, 0);
- 	if (!ep)
- 		goto autoconf_fail;
- 	ep->driver_data = fsg;		// claim the endpoint
- 	fsg->bulk_out = ep;
- 
- 	if (transport_is_cbi()) {
--		ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc);
-+		ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc, 0, 0, 0);
- 		if (!ep)
- 			goto autoconf_fail;
- 		ep->driver_data = fsg;		// claim the endpoint
-diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
-index 2e3d662..f3b3291 100644
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
-@@ -177,5 +177,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
- 		return 0x17;
- 	else if (gadget_is_husb2dev(gadget))
- 		return 0x18;
-+	else if (gadget_is_pxa27x(gadget))
-+		return 0x19;
- 	return -ENOENT;
- }
-diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
-index d08a8d0..d51feb2 100644
---- a/drivers/usb/gadget/gmidi.c
-+++ b/drivers/usb/gadget/gmidi.c
-@@ -1204,7 +1204,7 @@ static int __devinit gmidi_bind(struct usb_gadget *gadget)
- 	 * but there may also be important quirks to address.
- 	 */
- 	usb_ep_autoconfig_reset(gadget);
--	in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc);
-+	in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc, 0, 0, 0);
- 	if (!in_ep) {
- autoconf_fail:
- 		printk(KERN_ERR "%s: can't autoconfigure on %s\n",
-@@ -1214,7 +1214,7 @@ autoconf_fail:
- 	EP_IN_NAME = in_ep->name;
- 	in_ep->driver_data = in_ep;	/* claim */
- 
--	out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc);
-+	out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc, 0, 0, 0);
- 	if (!out_ep) {
- 		goto autoconf_fail;
- 	}
-diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
-new file mode 100644
-index 0000000..d89ecc5
---- /dev/null
-+++ b/drivers/usb/gadget/pxa27x_udc.c
-@@ -0,0 +1,2354 @@
-+/*
-+ * linux/drivers/usb/gadget/pxa27x_udc.c
-+ * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers
-+ *
-+ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
-+ * Copyright (C) 2003 Robert Schwebel, Pengutronix
-+ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
-+ * Copyright (C) 2003 David Brownell
-+ * Copyright (C) 2003 Joshua Wise
-+ * Copyright (C) 2004 Intel Corporation
-+ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it> 
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ */
-+
-+#undef DEBUG
-+/* #define	VERBOSE	DBG_VERBOSE */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/ioport.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/mm.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/dma.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach-types.h>
-+#include <asm/unaligned.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
-+
-+#include <asm/arch/udc.h>
-+
-+
-+/*
-+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
-+ * series processors.  
-+ * Such controller drivers work with a gadget driver.  The gadget driver
-+ * returns descriptors, implements configuration and data protocols used
-+ * by the host to interact with this device, and allocates endpoints to
-+ * the different protocol interfaces.  The controller driver virtualizes
-+ * usb hardware so that the gadget drivers will be more portable.
-+ * 
-+ * This UDC hardware wants to implement a bit too much USB protocol, so
-+ * it constrains the sorts of USB configuration change events that work.
-+ * The errata for these chips are misleading; some "fixed" bugs from
-+ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
-+ */
-+
-+#define	DRIVER_VERSION	"08-Feb-2007"
-+#define	DRIVER_DESC	"PXA 27x USB Device Controller driver"
-+
-+
-+static const char driver_name [] = "pxa27x_udc";
-+
-+static const char ep0name [] = "ep0";
-+
-+
-+#undef	USE_DMA 
-+#undef	DISABLE_TEST_MODE 
-+
-+#ifdef CONFIG_PROC_FS
-+#define	UDC_PROC_FILE
-+#endif
-+
-+#include "pxa27x_udc.h"
-+
-+#ifdef CONFIG_EMBEDDED
-+/* few strings, and little code to use them */
-+#undef	DEBUG
-+#undef	UDC_PROC_FILE
-+#endif
-+
-+#ifdef	USE_DMA
-+static int use_dma = 1;
-+module_param(use_dma, bool, 0);
-+MODULE_PARM_DESC (use_dma, "true to use dma");
-+
-+static void dma_nodesc_handler (int dmach, void *_ep);
-+static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req);
-+
-+#define	DMASTR " (dma support)"
-+
-+#else	/* !USE_DMA */
-+#define	DMASTR " (pio only)"
-+#endif
-+
-+#ifdef	CONFIG_USB_PXA27X_SMALL
-+#define SIZE_STR	" (small)"
-+#else
-+#define SIZE_STR	""
-+#endif
-+
-+#ifdef DISABLE_TEST_MODE
-+/* (mode == 0) == no undocumented chip tweaks
-+ * (mode & 1)  == double buffer bulk IN
-+ * (mode & 2)  == double buffer bulk OUT
-+ * ... so mode = 3 (or 7, 15, etc) does it for both
-+ */
-+static ushort fifo_mode = 0;
-+module_param(fifo_mode, ushort, 0);
-+MODULE_PARM_DESC (fifo_mode, "pxa27x udc fifo mode");
-+#endif
-+
-+#define UDCISR0_IR0	 0x3
-+#define UDCISR_INT_MASK	 (UDC_INT_FIFOERROR | UDC_INT_PACKETCMP)
-+#define UDCICR_INT_MASK	 UDCISR_INT_MASK
-+
-+#define UDCCSR_MASK	(UDCCSR_FST | UDCCSR_DME)
-+/* ---------------------------------------------------------------------------
-+ * 	endpoint related parts of the api to the usb controller hardware,
-+ *	used by gadget driver; and the inner talker-to-hardware core.
-+ * ---------------------------------------------------------------------------
-+ */
-+
-+static void pxa27x_ep_fifo_flush (struct usb_ep *ep);
-+static void nuke (struct pxa27x_ep *, int status);
-+
-+static void pio_irq_enable(int ep_num)
-+{
-+        if (ep_num < 16)
-+                UDCICR0 |= 3 << (ep_num * 2);
-+        else {
-+                ep_num -= 16;
-+                UDCICR1 |= 3 << (ep_num * 2);
-+	}
-+}
-+
-+static void pio_irq_disable(int ep_num)
-+{
-+        ep_num &= 0xf;
-+        if (ep_num < 16)
-+                UDCICR0 &= ~(3 << (ep_num * 2));
-+        else {
-+                ep_num -= 16;
-+                UDCICR1 &= ~(3 << (ep_num * 2));
-+        }
-+}
-+
-+/* The UDCCR reg contains mask and interrupt status bits,
-+ * so using '|=' isn't safe as it may ack an interrupt.
-+ */
-+#define UDCCR_MASK_BITS         (UDCCR_OEN | UDCCR_UDE)
-+
-+static inline void udc_set_mask_UDCCR(int mask)
-+{
-+	UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
-+}
-+
-+static inline void udc_clear_mask_UDCCR(int mask)
-+{
-+	UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
-+}
-+
-+static inline void udc_ack_int_UDCCR(int mask)
-+{
-+	/* udccr contains the bits we dont want to change */
-+	__u32 udccr = UDCCR & UDCCR_MASK_BITS;
-+
-+	UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
-+}
-+
-+/*
-+ * endpoint enable/disable
-+ *
-+ * we need to verify the descriptors used to enable endpoints.  since pxa27x
-+ * endpoint configurations are fixed, and are pretty much always enabled,
-+ * there's not a lot to manage here.
-+ *
-+ * because pxa27x can't selectively initialize bulk (or interrupt) endpoints,
-+ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
-+ * for a single interface (with only the default altsetting) and for gadget
-+ * drivers that don't halt endpoints (not reset by set_interface).  that also
-+ * means that if you use ISO, you must violate the USB spec rule that all
-+ * iso endpoints must be in non-default altsettings.
-+ */
-+static int pxa27x_ep_enable (struct usb_ep *_ep,
-+		const struct usb_endpoint_descriptor *desc)
-+{
-+	struct pxa27x_ep        *ep;
-+	struct pxa27x_udc       *dev;
-+
-+	ep = container_of (_ep, struct pxa27x_ep, ep);
-+	if (!_ep || !desc || _ep->name == ep0name
-+			|| desc->bDescriptorType != USB_DT_ENDPOINT
-+			|| ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
-+		DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
-+		return -EINVAL;
-+	}
-+
-+	/* xfer types must match, except that interrupt ~= bulk */
-+	if( ep->ep_type != USB_ENDPOINT_XFER_BULK
-+			&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-+		DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
-+		return -EINVAL;
-+	}
-+
-+	/* hardware _could_ do smaller, but driver doesn't */
-+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-+				&& le16_to_cpu (desc->wMaxPacketSize)
-+						!= BULK_FIFO_SIZE)
-+			|| !desc->wMaxPacketSize) {
-+		DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
-+		return -ERANGE;
-+	}
-+
-+	dev = ep->dev;
-+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-+		DMSG("%s, bogus device state\n", __FUNCTION__);
-+		return -ESHUTDOWN;
-+	}
-+
-+	ep->desc = desc;
-+	ep->dma = -1;
-+	ep->stopped = 0;
-+	ep->pio_irqs = ep->dma_irqs = 0;
-+	ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
-+
-+	/* flush fifo (mostly for OUT buffers) */
-+	pxa27x_ep_fifo_flush (_ep);
-+
-+	/* ... reset halt state too, if we could ... */
-+
-+#ifdef USE_DMA
-+	/* for (some) bulk and ISO endpoints, try to get a DMA channel and
-+	 * bind it to the endpoint.  otherwise use PIO. 
-+	 */
-+	DMSG("%s: called attributes=%d\n", __FUNCTION__, ep->ep_type);
-+	switch (ep->ep_type) {
-+	case USB_ENDPOINT_XFER_ISOC:
-+		if (le16_to_cpu(desc->wMaxPacketSize) % 32)
-+			break;
-+		// fall through
-+	case USB_ENDPOINT_XFER_BULK:
-+		if (!use_dma || !ep->reg_drcmr)
-+			break;
-+		ep->dma = pxa_request_dma ((char *)_ep->name,
-+ 				(le16_to_cpu (desc->wMaxPacketSize) > 64)
-+					? DMA_PRIO_MEDIUM /* some iso */
-+					: DMA_PRIO_LOW,
-+				dma_nodesc_handler, ep);
-+		if (ep->dma >= 0) {
-+			*ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
-+			DMSG("%s using dma%d\n", _ep->name, ep->dma);
-+		}
-+	default:
-+		break;	
-+	}
-+#endif
-+	DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
-+	return 0;
-+}
-+
-+static int pxa27x_ep_disable (struct usb_ep *_ep)
-+{
-+	struct pxa27x_ep	*ep;
-+
-+	ep = container_of (_ep, struct pxa27x_ep, ep);
-+	if (!_ep || !ep->desc) {
-+		DMSG("%s, %s not enabled\n", __FUNCTION__,
-+			_ep ? ep->ep.name : NULL);
-+		return -EINVAL;
-+	}
-+	nuke (ep, -ESHUTDOWN);
-+
-+#ifdef	USE_DMA
-+	if (ep->dma >= 0) {
-+		*ep->reg_drcmr = 0;
-+		pxa_free_dma (ep->dma);
-+		ep->dma = -1;
-+	}
-+#endif
-+
-+	/* flush fifo (mostly for IN buffers) */
-+	pxa27x_ep_fifo_flush (_ep);
-+
-+	ep->desc = 0;
-+	ep->stopped = 1;
-+
-+	DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
-+	return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* for the pxa27x, these can just wrap kmalloc/kfree.  gadget drivers
-+ * must still pass correctly initialized endpoints, since other controller
-+ * drivers may care about how it's currently set up (dma issues etc).
-+ */
-+
-+/*
-+ * 	pxa27x_ep_alloc_request - allocate a request data structure
-+ */
-+static struct usb_request *
-+pxa27x_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags)
-+{
-+	struct pxa27x_request *req;
-+
-+	req = kmalloc (sizeof *req, gfp_flags);
-+	if (!req)
-+		return 0;
-+
-+	memset (req, 0, sizeof *req);
-+	INIT_LIST_HEAD (&req->queue);
-+	return &req->req;
-+}
-+
-+
-+/*
-+ * 	pxa27x_ep_free_request - deallocate a request data structure
-+ */
-+static void
-+pxa27x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct pxa27x_request *req;
-+
-+	req = container_of(_req, struct pxa27x_request, req); 
-+	WARN_ON (!list_empty (&req->queue));
-+	kfree(req);
-+}
-+
-+
-+/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
-+ * no device-affinity and the heap works perfectly well for i/o buffers.
-+ * It wastes much less memory than dma_alloc_coherent() would, and even
-+ * prevents cacheline (32 bytes wide) sharing problems.
-+ */
-+static void *
-+pxa27x_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
-+	dma_addr_t *dma, unsigned int gfp_flags)
-+{
-+	char			*retval;
-+
-+	retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
-+	if (retval)
-+		*dma = virt_to_bus (retval);
-+	return retval;
-+}
-+
-+static void
-+pxa27x_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
-+		unsigned bytes)
-+{
-+	kfree (buf);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ *	done - retire a request; caller blocked irqs
-+ */
-+static void done(struct pxa27x_ep *ep, struct pxa27x_request *req, int status)
-+{
-+	list_del_init(&req->queue);
-+	if (likely (req->req.status == -EINPROGRESS))
-+		req->req.status = status;
-+	else
-+		status = req->req.status;
-+
-+	if (status && status != -ESHUTDOWN)
-+		DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
-+			ep->ep.name, &req->req, status,
-+			req->req.actual, req->req.length);
-+
-+	/* don't modify queue heads during completion callback */
-+	req->req.complete(&ep->ep, &req->req);
-+}
-+
-+
-+static inline void ep0_idle (struct pxa27x_udc *dev)
-+{
-+	dev->ep0state = EP0_IDLE;
-+	LED_EP0_OFF;
-+}
-+
-+static int
-+write_packet(volatile u32 *uddr, struct pxa27x_request *req, unsigned max)
-+{
-+	u32		*buf;
-+	int	length, count, remain;
-+
-+	buf = (u32*)(req->req.buf + req->req.actual);
-+	prefetch(buf);
-+
-+	/* how big will this packet be? */
-+	length = min(req->req.length - req->req.actual, max);
-+	req->req.actual += length;
-+
-+	remain = length & 0x3;
-+	count = length & ~(0x3);
-+		
-+	while (likely(count)) {
-+		*uddr = *buf++;
-+		count -= 4;
-+	}
-+
-+	if (remain) {
-+		volatile u8* reg=(u8*)uddr;
-+		char *rd =(u8*)buf;
-+
-+		while (remain--) {
-+			*reg=*rd++;
-+		}
-+	}
-+
-+	return length;
-+}
-+
-+/*
-+ * write to an IN endpoint fifo, as many packets as possible.
-+ * irqs will use this to write the rest later.
-+ * caller guarantees at least one packet buffer is ready (or a zlp).
-+ */
-+static int
-+write_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+	unsigned		max;
-+
-+	max = le16_to_cpu(ep->desc->wMaxPacketSize);
-+	do {
-+		int	count;
-+		int		is_last, is_short;
-+
-+		count = write_packet(ep->reg_udcdr, req, max);
-+
-+		/* last packet is usually short (or a zlp) */
-+		if (unlikely (count != max))
-+			is_last = is_short = 1;
-+		else {
-+			if (likely(req->req.length != req->req.actual)
-+					|| req->req.zero)
-+				is_last = 0;
-+			else
-+				is_last = 1;
-+			/* interrupt/iso maxpacket may not fill the fifo */
-+			is_short = unlikely (max < ep->fifo_size);
-+		}
-+
-+		DMSG("wrote %s count:%d bytes%s%s %d left %p\n",
-+			ep->ep.name, count,
-+			is_last ? "/L" : "", is_short ? "/S" : "",
-+			req->req.length - req->req.actual, &req->req);
-+
-+		/* let loose that packet. maybe try writing another one,
-+		 * double buffering might work.  TSP, TPC, and TFS
-+		 * bit values are the same for all normal IN endpoints.
-+		 */
-+		*ep->reg_udccsr = UDCCSR_PC;
-+		if (is_short)
-+			*ep->reg_udccsr = UDCCSR_SP;
-+
-+		/* requests complete when all IN data is in the FIFO */
-+		if (is_last) {
-+			done (ep, req, 0);
-+			if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
-+				pio_irq_disable (ep->ep_num);
-+#ifdef USE_DMA
-+				/* unaligned data and zlps couldn't use dma */
-+				if (unlikely(!list_empty(&ep->queue))) {
-+					req = list_entry(ep->queue.next,
-+						struct pxa27x_request, queue);
-+					kick_dma(ep,req);
-+					return 0;
-+				}
-+#endif
-+			}
-+			return 1;
-+		}
-+
-+		// TODO experiment: how robust can fifo mode tweaking be?
-+		// double buffering is off in the default fifo mode, which
-+		// prevents TFS from being set here.
-+
-+	} while (*ep->reg_udccsr & UDCCSR_FS);
-+	return 0;
-+}
-+
-+/* caller asserts req->pending (ep0 irq status nyet cleared); starts
-+ * ep0 data stage.  these chips want very simple state transitions.
-+ */
-+static inline
-+void ep0start(struct pxa27x_udc *dev, u32 flags, const char *tag)
-+{
-+	UDCCSR0 = flags|UDCCSR0_SA|UDCCSR0_OPC;
-+	UDCISR0 = UDCICR_INT(0, UDC_INT_FIFOERROR | UDC_INT_PACKETCMP);
-+	dev->req_pending = 0;
-+	DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
-+		__FUNCTION__, tag, UDCCSR0, flags);
-+}
-+
-+static int
-+write_ep0_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+	unsigned	count;
-+	int		is_short;
-+
-+	count = write_packet(&UDCDR0, req, EP0_FIFO_SIZE);
-+	ep->dev->stats.write.bytes += count;
-+
-+	/* last packet "must be" short (or a zlp) */
-+	is_short = (count != EP0_FIFO_SIZE);
-+
-+	DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
-+		req->req.length - req->req.actual, &req->req);
-+
-+	if (unlikely (is_short)) {
-+		if (ep->dev->req_pending)
-+			ep0start(ep->dev, UDCCSR0_IPR, "short IN");
-+		else
-+			UDCCSR0 = UDCCSR0_IPR;
-+
-+		count = req->req.length;
-+		done (ep, req, 0);
-+		ep0_idle(ep->dev);
-+#if 0
-+		/* This seems to get rid of lost status irqs in some cases:
-+		 * host responds quickly, or next request involves config
-+		 * change automagic, or should have been hidden, or ...
-+		 *
-+		 * FIXME get rid of all udelays possible...
-+		 */
-+		if (count >= EP0_FIFO_SIZE) {
-+			count = 100;
-+			do {
-+				if ((UDCCSR0 & UDCCSR0_OPC) != 0) {
-+					/* clear OPC, generate ack */
-+					UDCCSR0 = UDCCSR0_OPC;
-+					break;
-+				}
-+				count--;
-+				udelay(1);
-+			} while (count);
-+		}
-+#endif
-+	} else if (ep->dev->req_pending)
-+		ep0start(ep->dev, 0, "IN");
-+	return is_short;
-+}
-+
-+
-+/*
-+ * read_fifo -  unload packet(s) from the fifo we use for usb OUT
-+ * transfers and put them into the request.  caller should have made
-+ * sure there's at least one packet ready.
-+ *
-+ * returns true if the request completed because of short packet or the
-+ * request buffer having filled (and maybe overran till end-of-packet).
-+ */
-+static int
-+read_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+	for (;;) {
-+		u32		*buf;
-+		int	bufferspace, count, is_short;
-+
-+		/* make sure there's a packet in the FIFO.*/
-+		if (unlikely ((*ep->reg_udccsr & UDCCSR_PC) == 0))
-+			break;
-+		buf =(u32*) (req->req.buf + req->req.actual);
-+		prefetchw(buf);
-+		bufferspace = req->req.length - req->req.actual;
-+
-+		/* read all bytes from this packet */
-+		if (likely (*ep->reg_udccsr & UDCCSR_BNE)) {
-+			count = 0x3ff & *ep->reg_udcbcr;
-+			req->req.actual += min (count, bufferspace);
-+		} else /* zlp */
-+			count = 0;
-+			
-+		is_short = (count < ep->ep.maxpacket);
-+		DMSG("read %s udccsr:%02x, count:%d bytes%s req %p %d/%d\n",
-+			ep->ep.name, *ep->reg_udccsr, count, 
-+			is_short ? "/S" : "",
-+			&req->req, req->req.actual, req->req.length);
-+
-+//		dump_regs(ep->ep_num );
-+		count = min(count, bufferspace);
-+		while (likely (count > 0)) {
-+			*buf++ = *ep->reg_udcdr;
-+			count -= 4;
-+		}
-+		DMSG("Buf:0x%p\n", req->req.buf);
-+
-+		*ep->reg_udccsr =  UDCCSR_PC;
-+		/* RPC/RSP/RNE could now reflect the other packet buffer */
-+
-+		/* completion */
-+		if (is_short || req->req.actual == req->req.length) {
-+			done (ep, req, 0);
-+			if (list_empty(&ep->queue))
-+				pio_irq_disable (ep->ep_num);
-+			return 1;
-+		}
-+
-+		/* finished that packet.  the next one may be waiting... */
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * special ep0 version of the above.  no UBCR0 or double buffering; status
-+ * handshaking is magic.  most device protocols don't need control-OUT.
-+ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
-+ * protocols do use them.
-+ */
-+static int
-+read_ep0_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+	u32		*buf, word;
-+	unsigned	bufferspace;
-+
-+	buf = (u32*) (req->req.buf + req->req.actual);
-+	bufferspace = req->req.length - req->req.actual;
-+
-+	while (UDCCSR0 & UDCCSR0_RNE) {
-+		word = UDCDR0;
-+
-+		if (unlikely (bufferspace == 0)) {
-+			/* this happens when the driver's buffer
-+			 * is smaller than what the host sent.
-+			 * discard the extra data.
-+			 */
-+			if (req->req.status != -EOVERFLOW)
-+				DMSG("%s overflow\n", ep->ep.name);
-+			req->req.status = -EOVERFLOW;
-+		} else {
-+			*buf++ = word;
-+			req->req.actual += 4;
-+			bufferspace -= 4;
-+		}
-+	}
-+
-+	UDCCSR0 = UDCCSR0_OPC ;
-+
-+	/* completion */
-+	if (req->req.actual >= req->req.length)
-+		return 1;
-+
-+	/* finished that packet.  the next one may be waiting... */
-+	return 0;
-+}
-+
-+#ifdef	USE_DMA
-+
-+#define	MAX_IN_DMA	((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
-+static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+	u32	dcmd = 0;
-+	u32	len = req->req.length;
-+	u32	buf = req->req.dma;
-+	u32	fifo = io_v2p ((u32)ep->reg_udcdr);
-+
-+	buf += req->req.actual;
-+	len -= req->req.actual;
-+	ep->dma_con = 0;
-+	
-+	DMSG("%s: req:0x%p length:%d, actual:%d dma:%d\n", 
-+			__FUNCTION__, &req->req, req->req.length, 
-+			req->req.actual,ep->dma);
-+	
-+	/* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
-+	DCSR(ep->dma) = DCSR_NODESC;
-+	if (buf & 0x3) 
-+		DALGN |= 1 << ep->dma;
-+	else
-+		DALGN &= ~(1 << ep->dma);
-+
-+	if (ep->dir_in) {
-+		DSADR(ep->dma) = buf;
-+		DTADR(ep->dma) = fifo;
-+		if (len > MAX_IN_DMA) {
-+			len= MAX_IN_DMA;
-+			ep->dma_con =1 ; 
-+		} else if (len >= ep->ep.maxpacket) {
-+			if ((ep->dma_con = (len % ep->ep.maxpacket) != 0))
-+				len = ep->ep.maxpacket;
-+		}
-+		 dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
-+			| DCMD_FLOWTRG | DCMD_INCSRCADDR;
-+	} else {
-+		DSADR(ep->dma) = fifo;
-+		DTADR(ep->dma) = buf;
-+		dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
-+			| DCMD_FLOWSRC | DCMD_INCTRGADDR;
-+	}
-+	*ep->reg_udccsr = UDCCSR_DME;
-+	DCMD(ep->dma) = dcmd;
-+	DCSR(ep->dma) =  DCSR_NODESC | DCSR_EORIRQEN \
-+				| ((ep->dir_in) ? DCSR_STOPIRQEN : 0);
-+	*ep->reg_drcmr = ep->dma | DRCMR_MAPVLD;
-+	DCSR(ep->dma) |= DCSR_RUN;
-+}
-+
-+static void cancel_dma(struct pxa27x_ep *ep)
-+{
-+	struct pxa27x_request	*req;
-+	u32			tmp;
-+
-+	if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
-+		return;
-+
-+	DMSG("hehe dma:%d,dcsr:0x%x\n", ep->dma, DCSR(ep->dma));
-+	DCSR(ep->dma) = 0;
-+	while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
-+		cpu_relax();
-+
-+	req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+	tmp = DCMD(ep->dma) & DCMD_LENGTH;
-+	req->req.actual = req->req.length - tmp;
-+
-+	/* the last tx packet may be incomplete, so flush the fifo.
-+	 * FIXME correct req.actual if we can
-+	 */
-+	*ep->reg_udccsr = UDCCSR_FEF;
-+}
-+
-+static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r)
-+{
-+	struct pxa27x_ep	*ep = _ep;
-+	struct pxa27x_request	*req, *req_next;
-+	u32			dcsr, tmp, completed;
-+
-+	local_irq_disable();
-+
-+	req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+
-+	DMSG("%s, buf:0x%p\n",__FUNCTION__, req->req.buf);
-+	
-+	ep->dma_irqs++;
-+	ep->dev->stats.irqs++;
-+	HEX_DISPLAY(ep->dev->stats.irqs);
-+
-+	completed = 0;
-+
-+	dcsr = DCSR(dmach);
-+	DCSR(ep->dma) &= ~DCSR_RUN;
-+
-+	if (dcsr & DCSR_BUSERR) {
-+		DCSR(dmach) = DCSR_BUSERR;
-+		printk(KERN_ERR " Buss Error\n");
-+		req->req.status = -EIO;
-+		completed = 1;
-+	} else if (dcsr & DCSR_ENDINTR) {
-+		DCSR(dmach) = DCSR_ENDINTR;
-+		if (ep->dir_in) {
-+			tmp = req->req.length - req->req.actual;
-+			/* Last packet is a short one*/
-+			if ( tmp < ep->ep.maxpacket) { 
-+				int count = 0;
-+				
-+				*ep->reg_udccsr = UDCCSR_SP | \
-+					(*ep->reg_udccsr & UDCCSR_MASK);
-+				/*Wait for packet out */
-+				while( (count++ < 10000) && \
-+					!(*ep->reg_udccsr & UDCCSR_FS));	
-+				if (count >= 10000)
-+					DMSG("Failed to send packet\n");
-+				else
-+					DMSG("%s: short packet sent len:%d,"
-+					"length:%d,actual:%d\n", __FUNCTION__,
-+					tmp, req->req.length, req->req.actual);
-+				req->req.actual = req->req.length;
-+				completed = 1;
-+			/* There are still packets to transfer */
-+			} else if ( ep->dma_con) {
-+				DMSG("%s: more packets,length:%d,actual:%d\n",
-+					 __FUNCTION__,req->req.length, 
-+					 req->req.actual);
-+				req->req.actual += ep->ep.maxpacket;
-+				completed = 0;
-+			} else {
-+				DMSG("%s: no more packets,length:%d,"
-+					"actual:%d\n", __FUNCTION__,
-+					req->req.length, req->req.actual);
-+				req->req.actual = req->req.length;
-+				completed = 1;
-+			}
-+		} else {
-+			req->req.actual = req->req.length;
-+			completed = 1;
-+		}
-+	} else if (dcsr & DCSR_EORINTR) { //Only happened in OUT DMA
-+		int remain,udccsr ;
-+
-+		DCSR(dmach) = DCSR_EORINTR;
-+		remain = DCMD(dmach) & DCMD_LENGTH;
-+		req->req.actual = req->req.length - remain;
-+		
-+		udccsr = *ep->reg_udccsr;
-+		if (udccsr & UDCCSR_SP) {
-+			*ep->reg_udccsr = UDCCSR_PC | (udccsr & UDCCSR_MASK);
-+			completed = 1;
-+		}
-+		DMSG("%s: length:%d actual:%d\n", 
-+				__FUNCTION__, req->req.length, req->req.actual);
-+	} else
-+		DMSG("%s: Others dma:%d DCSR:0x%x DCMD:0x%x\n",
-+				__FUNCTION__, dmach, DCSR(dmach), DCMD(dmach));	
-+	
-+	if (likely(completed)) {
-+		if (req->queue.next != &ep->queue) {
-+			req_next = list_entry(req->queue.next, 
-+					struct pxa27x_request, queue);
-+			kick_dma(ep, req_next);
-+		}
-+		done(ep, req, 0);
-+	} else {
-+		kick_dma(ep, req);
-+	}
-+
-+	local_irq_enable();
-+}
-+
-+#endif
-+/*-------------------------------------------------------------------------*/
-+
-+static int
-+pxa27x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned int gfp_flags)
-+{
-+	struct pxa27x_ep	*ep;
-+	struct pxa27x_request	*req;
-+	struct pxa27x_udc	*dev;
-+	unsigned long		flags;
-+
-+	req = container_of(_req, struct pxa27x_request, req);
-+	if (unlikely (!_req || !_req->complete || !_req->buf|| 
-+			!list_empty(&req->queue))) {
-+		DMSG("%s, bad params\n", __FUNCTION__);
-+		return -EINVAL;
-+	}
-+
-+	ep = container_of(_ep, struct pxa27x_ep, ep);
-+	if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-+		DMSG("%s, bad ep\n", __FUNCTION__);
-+		return -EINVAL;
-+	}
-+
-+	DMSG("%s, ep point %d is queue\n", __FUNCTION__, ep->ep_num);
-+
-+	dev = ep->dev;
-+	if (unlikely (!dev->driver
-+			|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-+		DMSG("%s, bogus device state\n", __FUNCTION__);
-+		return -ESHUTDOWN;
-+	}
-+
-+	/* iso is always one packet per request, that's the only way
-+	 * we can report per-packet status.  that also helps with dma.
-+	 */
-+	if (unlikely (ep->ep_type == USB_ENDPOINT_XFER_ISOC
-+			&& req->req.length > le16_to_cpu
-+						(ep->desc->wMaxPacketSize)))
-+		return -EMSGSIZE;
-+
-+#ifdef	USE_DMA
-+	/* FIXME: caller may already have done the dma mapping */
-+	if (ep->dma >= 0) {
-+		_req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
-+			(ep->dir_in) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+	}
-+#endif
-+
-+	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
-+	     _ep->name, _req, _req->length, _req->buf);
-+
-+	local_irq_save(flags);
-+
-+	_req->status = -EINPROGRESS;
-+	_req->actual = 0;
-+
-+	/* kickstart this i/o queue? */
-+	if (list_empty(&ep->queue) && !ep->stopped) {
-+		if (ep->desc == 0 /* ep0 */) {
-+			unsigned	length = _req->length;
-+
-+			switch (dev->ep0state) {
-+			case EP0_IN_DATA_PHASE:
-+				dev->stats.write.ops++;
-+				if (write_ep0_fifo(ep, req))
-+					req = 0;
-+				break;
-+
-+			case EP0_OUT_DATA_PHASE:
-+				dev->stats.read.ops++;
-+				if (dev->req_pending)
-+					ep0start(dev, UDCCSR0_IPR, "OUT");
-+				if (length == 0 || ((UDCCSR0 & UDCCSR0_RNE) != 0
-+						&& read_ep0_fifo(ep, req))) {
-+					ep0_idle(dev);
-+					done(ep, req, 0);
-+					req = 0;
-+				}
-+				break;
-+			case EP0_NO_ACTION:
-+				ep0_idle(dev);
-+				req=0;
-+				break;
-+			default:
-+				DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
-+				local_irq_restore (flags);
-+				return -EL2HLT;
-+			}
-+#ifdef USE_DMA
-+		/* either start dma or prime pio pump */
-+		} else if (ep->dma >= 0) {
-+			kick_dma(ep, req);
-+#endif
-+		/* can the FIFO can satisfy the request immediately? */
-+		} else if (ep->dir_in
-+				&& (*ep->reg_udccsr & UDCCSR_FS) != 0
-+				&& write_fifo(ep, req)) {
-+			req = 0;
-+		} else if ((*ep->reg_udccsr & UDCCSR_FS) != 0
-+				&& read_fifo(ep, req)) {
-+			req = 0;
-+		}
-+		DMSG("req:%p,ep->desc:%p,ep->dma:%d\n", req, ep->desc, ep->dma);
-+		if (likely (req && ep->desc) && ep->dma < 0)
-+			pio_irq_enable(ep->ep_num);
-+	}
-+
-+	/* pio or dma irq handler advances the queue. */
-+	if (likely (req != 0))
-+		list_add_tail(&req->queue, &ep->queue);
-+	local_irq_restore(flags);
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * 	nuke - dequeue ALL requests
-+ */
-+static void nuke(struct pxa27x_ep *ep, int status)
-+{
-+	struct pxa27x_request *req;
-+
-+	/* called with irqs blocked */
-+#ifdef	USE_DMA
-+	if (ep->dma >= 0 && !ep->stopped)
-+		cancel_dma(ep);
-+#endif
-+	while (!list_empty(&ep->queue)) {
-+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+		done(ep, req, status);
-+	}
-+	if (ep->desc)
-+		pio_irq_disable (ep->ep_num);
-+}
-+
-+
-+/* dequeue JUST ONE request */
-+static int pxa27x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct pxa27x_ep	*ep;
-+	struct pxa27x_request	*req;
-+	unsigned long		flags;
-+
-+	ep = container_of(_ep, struct pxa27x_ep, ep);
-+	if (!_ep || ep->ep.name == ep0name)
-+		return -EINVAL;
-+
-+	local_irq_save(flags);
-+
-+	/* make sure it's actually queued on this endpoint */
-+	list_for_each_entry (req, &ep->queue, queue) {
-+		if (&req->req == _req)
-+			break;
-+	}
-+	if (&req->req != _req) {
-+		local_irq_restore(flags);
-+		return -EINVAL;
-+	}
-+
-+#ifdef	USE_DMA
-+	if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
-+		cancel_dma(ep);
-+		done(ep, req, -ECONNRESET);
-+		/* restart i/o */
-+		if (!list_empty(&ep->queue)) {
-+			req = list_entry(ep->queue.next,
-+					struct pxa27x_request, queue);
-+			kick_dma(ep, req);
-+		}
-+	} else
-+#endif
-+		done(ep, req, -ECONNRESET);
-+
-+	local_irq_restore(flags);
-+	return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int pxa27x_ep_set_halt(struct usb_ep *_ep, int value)
-+{
-+	struct pxa27x_ep	*ep;
-+	unsigned long		flags;
-+
-+	DMSG("%s is called\n", __FUNCTION__);
-+	ep = container_of(_ep, struct pxa27x_ep, ep);
-+	if (unlikely (!_ep
-+			|| (!ep->desc && ep->ep.name != ep0name))
-+			|| ep->ep_type == USB_ENDPOINT_XFER_ISOC) {
-+		DMSG("%s, bad ep\n", __FUNCTION__);
-+		return -EINVAL;
-+	}
-+	if (value == 0) {
-+		/* this path (reset toggle+halt) is needed to implement
-+		 * SET_INTERFACE on normal hardware.  but it can't be
-+		 * done from software on the PXA UDC, and the hardware
-+		 * forgets to do it as part of SET_INTERFACE automagic.
-+		 */
-+		DMSG("only host can clear %s halt\n", _ep->name);
-+		return -EROFS;
-+	}
-+
-+	local_irq_save(flags);
-+
-+	if (ep->dir_in	&& ((*ep->reg_udccsr & UDCCSR_FS) == 0
-+			   || !list_empty(&ep->queue))) {
-+		local_irq_restore(flags);
-+		return -EAGAIN;
-+	}
-+
-+	/* FST bit is the same for control, bulk in, bulk out, interrupt in */
-+	*ep->reg_udccsr = UDCCSR_FST|UDCCSR_FEF;
-+
-+	/* ep0 needs special care */
-+	if (!ep->desc) {
-+		start_watchdog(ep->dev);
-+		ep->dev->req_pending = 0;
-+		ep->dev->ep0state = EP0_STALL;
-+		LED_EP0_OFF;
-+
-+ 	/* and bulk/intr endpoints like dropping stalls too */
-+ 	} else {
-+ 		unsigned i;
-+ 		for (i = 0; i < 1000; i += 20) {
-+ 			if (*ep->reg_udccsr & UDCCSR_SST)
-+ 				break;
-+ 			udelay(20);
-+ 		}
-+  	}
-+ 	local_irq_restore(flags);
-+
-+	DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
-+	return 0;
-+}
-+
-+static int pxa27x_ep_fifo_status(struct usb_ep *_ep)
-+{
-+	struct pxa27x_ep        *ep;
-+
-+	ep = container_of(_ep, struct pxa27x_ep, ep);
-+	if (!_ep) {
-+		DMSG("%s, bad ep\n", __FUNCTION__);
-+		return -ENODEV;
-+	}
-+	/* pxa can't report unclaimed bytes from IN fifos */
-+	if (ep->dir_in)
-+		return -EOPNOTSUPP;
-+	if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
-+			|| (*ep->reg_udccsr & UDCCSR_FS) == 0)
-+		return 0;
-+	else
-+		return (*ep->reg_udcbcr & 0xfff) + 1;
-+}
-+
-+static void pxa27x_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+	struct pxa27x_ep        *ep;
-+
-+	ep = container_of(_ep, struct pxa27x_ep, ep);
-+	if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
-+		DMSG("%s, bad ep\n", __FUNCTION__);
-+		return;
-+	}
-+
-+	/* toggle and halt bits stay unchanged */
-+
-+	/* for OUT, just read and discard the FIFO contents. */
-+	if (!ep->dir_in) {
-+		while (((*ep->reg_udccsr) & UDCCSR_BNE) != 0)
-+			(void) *ep->reg_udcdr;
-+		return;
-+	}
-+
-+	/* most IN status is the same, but ISO can't stall */
-+	*ep->reg_udccsr = UDCCSR_PC|UDCCSR_FST|UDCCSR_TRN
-+		| (ep->ep_type == USB_ENDPOINT_XFER_ISOC)
-+			? 0 : UDCCSR_SST;
-+}
-+
-+
-+static struct usb_ep_ops pxa27x_ep_ops = {
-+	.enable		= pxa27x_ep_enable,
-+	.disable	= pxa27x_ep_disable,
-+
-+	.alloc_request	= pxa27x_ep_alloc_request,
-+	.free_request	= pxa27x_ep_free_request,
-+
-+	.alloc_buffer	= pxa27x_ep_alloc_buffer,
-+	.free_buffer	= pxa27x_ep_free_buffer,
-+
-+	.queue		= pxa27x_ep_queue,
-+	.dequeue	= pxa27x_ep_dequeue,
-+
-+	.set_halt	= pxa27x_ep_set_halt,
-+	.fifo_status	= pxa27x_ep_fifo_status,
-+	.fifo_flush	= pxa27x_ep_fifo_flush,
-+};
-+
-+
-+/* ---------------------------------------------------------------------------
-+ * 	device-scoped parts of the api to the usb controller hardware
-+ * ---------------------------------------------------------------------------
-+ */
-+
-+static inline void validate_fifo_size(struct pxa27x_ep *pxa_ep, u8 bmAttributes)
-+{
-+	switch (bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+	case USB_ENDPOINT_XFER_CONTROL:
-+		pxa_ep->fifo_size = EP0_FIFO_SIZE;
-+		break;
-+	case USB_ENDPOINT_XFER_ISOC:
-+		pxa_ep->fifo_size = ISO_FIFO_SIZE;
-+		break;
-+	case USB_ENDPOINT_XFER_BULK:
-+		pxa_ep->fifo_size = BULK_FIFO_SIZE;
-+		break;
-+	case USB_ENDPOINT_XFER_INT:
-+		pxa_ep->fifo_size = INT_FIFO_SIZE;
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
-+#define NAME_SIZE 18
-+struct usb_ep* pxa27x_ep_alloc(struct usb_gadget *gadget, struct usb_endpoint_descriptor *desc, int config, int interface, int alt)
-+{
-+	u32 tmp ;
-+	unsigned i;
-+	char* name;
-+	struct usb_ep * ep = NULL;
-+	struct pxa27x_ep *pxa_ep = NULL;
-+	struct pxa27x_udc *dev = the_controller;
-+
-+	DMSG("pxa27x_config_ep is called\n");
-+	DMSG(" usb endpoint descriptor is:\n"
-+		"	bLength:%d\n"
-+		"	bDescriptorType:%x\n"
-+		"	bEndpointAddress:%x\n"
-+		"	bmAttributes:%x\n"
-+		"	wMaxPacketSize:%d\n",
-+		desc->bLength,
-+		desc->bDescriptorType,desc->bEndpointAddress,
-+		desc->bmAttributes,desc->wMaxPacketSize);
-+
-+	for (i = 1; i < UDC_EP_NUM; i++) {
-+		if(!dev->ep[i].assigned) {
-+			pxa_ep = &dev->ep[i];
-+			pxa_ep->assigned = 1;
-+			pxa_ep->ep_num = i;
-+			break;
-+		}
-+	}
-+	if (unlikely(i == UDC_EP_NUM)) {
-+		printk(KERN_ERR __FILE__ ": Failed to find a spare endpoint\n");
-+		return ep;
-+	}
-+
-+
-+	ep = &pxa_ep->ep;
-+
-+	pxa_ep->dev = dev;
-+	pxa_ep->desc = desc;
-+	pxa_ep->pio_irqs = pxa_ep->dma_irqs = 0;
-+	pxa_ep->dma = -1;
-+	
-+	if (!(desc->bEndpointAddress & 0xF))
-+		desc->bEndpointAddress |= i;
-+		
-+	if (!(desc->wMaxPacketSize)) {
-+		validate_fifo_size(pxa_ep, desc->bmAttributes);
-+		desc->wMaxPacketSize = pxa_ep->fifo_size;
-+	} else
-+		pxa_ep->fifo_size = desc->wMaxPacketSize;
-+
-+	pxa_ep->dir_in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
-+	pxa_ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-+	pxa_ep->stopped = 1;
-+	pxa_ep->dma_con = 0;
-+	pxa_ep->config = config;
-+	pxa_ep->interface = interface;
-+	pxa_ep->aisn = alt;
-+	
-+	pxa_ep->reg_udccsr = &UDCCSR0 + i;
-+	pxa_ep->reg_udcbcr = &UDCBCR0 + i;
-+	pxa_ep->reg_udcdr = &UDCDR0 + i ;
-+	pxa_ep->reg_udccr = &UDCCRA - 1 + i;
-+#ifdef USE_DMA
-+	pxa_ep->reg_drcmr = &DRCMR24 + i;
-+#endif
-+
-+	DMSG("udccsr=0x%8x, udcbcr=0x%8x, udcdr=0x%8x," 
-+			"udccr0=0x%8x\n",
-+			(unsigned)pxa_ep->reg_udccsr, 
-+			(unsigned)pxa_ep->reg_udcbcr, 
-+			(unsigned)pxa_ep->reg_udcdr, 
-+			(unsigned)pxa_ep->reg_udccr);
-+
-+	/* Configure UDCCR */
-+	tmp = 0;
-+	tmp |= (pxa_ep->config << UDCCONR_CN_S) & UDCCONR_CN;
-+#if 0
-+	tmp |= (pxa_ep->interface << UDCCONR_IN_S) & UDCCONR_IN;
-+	tmp |= (pxa_ep->aisn << UDCCONR_AISN_S) & UDCCONR_AISN;
-+#else
-+	tmp |= (0 << UDCCONR_IN_S) & UDCCONR_IN;
-+	tmp |= (0 << UDCCONR_AISN_S) & UDCCONR_AISN;
-+#endif
-+	tmp |= (desc->bEndpointAddress << UDCCONR_EN_S) & UDCCONR_EN;
-+	tmp |= (pxa_ep->ep_type << UDCCONR_ET_S) & UDCCONR_ET;
-+	tmp |= (pxa_ep->dir_in) ? UDCCONR_ED : 0;
-+	tmp |= (min(pxa_ep->fifo_size,  (unsigned)desc->wMaxPacketSize) \
-+			<< UDCCONR_MPS_S ) & UDCCONR_MPS; 
-+	tmp |= UDCCONR_DE | UDCCONR_EE;
-+//	tmp |= UDCCONR_EE;
-+
-+	*pxa_ep->reg_udccr = tmp;
-+
-+#ifdef USE_DMA
-+	/* Only BULK use DMA */
-+	if ((pxa_ep->ep_type & USB_ENDPOINT_XFERTYPE_MASK)\
-+			== USB_ENDPOINT_XFER_BULK)
-+		*pxa_ep->reg_udccsr = UDCCSR_DME;
-+#endif
-+
-+	DMSG("UDCCR: 0x%p is 0x%x\n", pxa_ep->reg_udccr,*pxa_ep->reg_udccr);
-+	
-+	/* Fill ep name*/
-+	name = kmalloc(NAME_SIZE, GFP_KERNEL);
-+	if (!name) {
-+		printk(KERN_ERR "%s: Error\n", __FUNCTION__);
-+		return NULL;
-+	}
-+
-+	switch (pxa_ep->ep_type) {
-+	case USB_ENDPOINT_XFER_BULK:
-+		sprintf(name, "Bulk-%s-%d", (pxa_ep->dir_in ? "in":"out"), i);
-+		break;
-+	case USB_ENDPOINT_XFER_INT:
-+		sprintf(name, "Interrupt-%s-%d", (pxa_ep->dir_in ? \
-+				"in":"out"), i);
-+		break;
-+	default:
-+		sprintf(name, "endpoint-%s-%d", (pxa_ep->dir_in ? \
-+				"in":"out"), i);
-+		break;
-+	}
-+	ep->name = name;
-+	
-+	ep->ops = &pxa27x_ep_ops;	
-+	ep->maxpacket = min((ushort)pxa_ep->fifo_size, desc->wMaxPacketSize);
-+
-+	list_add_tail (&ep->ep_list, &gadget->ep_list);
-+	return ep;
-+}
-+
-+static int pxa27x_udc_get_frame(struct usb_gadget *_gadget)
-+{
-+	return (UDCFNR & 0x3FF);
-+}
-+
-+static int pxa27x_udc_wakeup(struct usb_gadget *_gadget)
-+{
-+	/* host may not have enabled remote wakeup */
-+	if ((UDCCR & UDCCR_DWRE) == 0)
-+		return -EHOSTUNREACH;
-+	udc_set_mask_UDCCR(UDCCR_UDR);
-+	return 0;
-+}
-+
-+static const struct usb_gadget_ops pxa27x_udc_ops = {
-+	.ep_alloc	 = pxa27x_ep_alloc,
-+	.get_frame	 = pxa27x_udc_get_frame,
-+	.wakeup		 = pxa27x_udc_wakeup,
-+	// current versions must always be self-powered
-+};
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#ifdef UDC_PROC_FILE
-+
-+static const char proc_node_name [] = "driver/udc";
-+
-+static int
-+udc_proc_read(char *page, char **start, off_t off, int count,
-+		int *eof, void *_dev)
-+{
-+	char			*buf = page;
-+	struct pxa27x_udc	*dev = _dev;
-+	char			*next = buf;
-+	unsigned		size = count;
-+	unsigned long		flags;
-+	int			i, t;
-+	u32			tmp;
-+
-+	if (off != 0)
-+		return 0;
-+
-+	local_irq_save(flags);
-+
-+	/* basic device status */
-+	t = scnprintf(next, size, DRIVER_DESC "\n"
-+		"%s version: %s\nGadget driver: %s\n",
-+		driver_name, DRIVER_VERSION SIZE_STR DMASTR,
-+		dev->driver ? dev->driver->driver.name : "(none)");
-+	size -= t;
-+	next += t;
-+
-+	/* registers for device and ep0 */
-+	t = scnprintf(next, size,
-+		"uicr %02X.%02X, usir %02X.%02x, ufnr %02X\n",
-+		UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
-+	size -= t;
-+	next += t;
-+	
-+	tmp = UDCCR;
-+	t = scnprintf(next, size,"udccr %02X =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", tmp,
-+		(tmp & UDCCR_OEN) ? " oen":"",
-+		(tmp & UDCCR_AALTHNP) ? " aalthnp":"",
-+		(tmp & UDCCR_AHNP) ? " rem" : "",
-+		(tmp & UDCCR_BHNP) ? " rstir" : "",
-+		(tmp & UDCCR_DWRE) ? " dwre" : "",
-+		(tmp & UDCCR_SMAC) ? " smac" : "",
-+		(tmp & UDCCR_EMCE) ? " emce" : "",
-+		(tmp & UDCCR_UDR) ? " udr" : "",
-+		(tmp & UDCCR_UDA) ? " uda" : "",
-+		(tmp & UDCCR_UDE) ? " ude" : "",
-+		(tmp & UDCCR_ACN) >> UDCCR_ACN_S,
-+		(tmp & UDCCR_AIN) >> UDCCR_AIN_S,
-+		(tmp & UDCCR_AAISN)>> UDCCR_AAISN_S );
-+
-+	size -= t;
-+	next += t;
-+
-+	tmp = UDCCSR0;
-+	t = scnprintf(next, size,
-+		"udccsr0 %02X =%s%s%s%s%s%s%s\n", tmp,
-+		(tmp & UDCCSR0_SA) ? " sa" : "",
-+		(tmp & UDCCSR0_RNE) ? " rne" : "",
-+		(tmp & UDCCSR0_FST) ? " fst" : "",
-+		(tmp & UDCCSR0_SST) ? " sst" : "",
-+		(tmp & UDCCSR0_DME) ? " dme" : "",
-+		(tmp & UDCCSR0_IPR) ? " ipr" : "",
-+		(tmp & UDCCSR0_OPC) ? " opc" : "");
-+	size -= t;
-+	next += t;
-+
-+	if (!dev->driver)
-+		goto done;
-+
-+	t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
-+		dev->stats.write.bytes, dev->stats.write.ops,
-+		dev->stats.read.bytes, dev->stats.read.ops,
-+		dev->stats.irqs);
-+	size -= t;
-+	next += t;
-+
-+	/* dump endpoint queues */
-+	for (i = 0; i < UDC_EP_NUM; i++) {
-+		struct pxa27x_ep	*ep = &dev->ep [i];
-+		struct pxa27x_request	*req;
-+		int			t;
-+
-+		if (i != 0) {
-+			const struct usb_endpoint_descriptor	*d;
-+
-+			d = ep->desc;
-+			if (!d)
-+				continue;
-+			tmp = *dev->ep [i].reg_udccsr;
-+			t = scnprintf(next, size,
-+				"%s max %d %s udccs %02x udccr:0x%x\n",
-+				ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
-+				(ep->dma >= 0) ? "dma" : "pio", tmp,
-+				*dev->ep[i].reg_udccr);
-+			/* TODO translate all five groups of udccs bits! */
-+
-+		} else /* ep0 should only have one transfer queued */
-+			t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
-+				ep->pio_irqs);
-+		if (t <= 0 || t > size)
-+			goto done;
-+		size -= t;
-+		next += t;
-+
-+		if (list_empty(&ep->queue)) {
-+			t = scnprintf(next, size, "\t(nothing queued)\n");
-+			if (t <= 0 || t > size)
-+				goto done;
-+			size -= t;
-+			next += t;
-+			continue;
-+		}
-+		list_for_each_entry(req, &ep->queue, queue) {
-+#ifdef	USE_DMA
-+			if (ep->dma >= 0 && req->queue.prev == &ep->queue)
-+				t = scnprintf(next, size,
-+					"\treq %p len %d/%d "
-+					"buf %p (dma%d dcmd %08x)\n",
-+					&req->req, req->req.actual,
-+					req->req.length, req->req.buf,
-+					ep->dma, DCMD(ep->dma)
-+					// low 13 bits == bytes-to-go
-+					);
-+			else
-+#endif
-+				t = scnprintf(next, size,
-+					"\treq %p len %d/%d buf %p\n",
-+					&req->req, req->req.actual,
-+					req->req.length, req->req.buf);
-+			if (t <= 0 || t > size)
-+				goto done;
-+			size -= t;
-+			next += t;
-+		}
-+	}
-+
-+done:
-+	local_irq_restore(flags);
-+	*eof = 1;
-+	return count - size;
-+}
-+
-+#define create_proc_files() \
-+	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
-+#define remove_proc_files() \
-+	remove_proc_entry(proc_node_name, NULL)
-+
-+#else	/* !UDC_PROC_FILE */
-+#define create_proc_files() do {} while (0)
-+#define remove_proc_files() do {} while (0)
-+
-+#endif	/* UDC_PROC_FILE */
-+
-+/* "function" sysfs attribute */
-+static ssize_t
-+show_function (struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+	struct pxa27x_udc	*dev = dev_get_drvdata (_dev);
-+
-+	if (!dev->driver
-+			|| !dev->driver->function
-+			|| strlen (dev->driver->function) > PAGE_SIZE)
-+		return 0;
-+	return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
-+}
-+static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * 	udc_disable - disable USB device controller
-+ */
-+static void udc_disable(struct pxa27x_udc *dev)
-+{
-+	UDCICR0 = UDCICR1 = 0x00000000;
-+
-+	udc_clear_mask_UDCCR(UDCCR_UDE);
-+
-+        /* Disable clock for USB device */
-+	pxa_set_cken(CKEN11_USB, 0);
-+
-+	ep0_idle (dev);
-+	dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+	if (dev->mach->gpio_pullup)
-+		GPCR(dev->mach->gpio_pullup) = GPIO_bit(dev->mach->gpio_pullup);
-+	if (dev->mach->udc_command)
-+		dev->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
-+
-+	make_usb_disappear();
-+}
-+
-+
-+/*
-+ * 	udc_reinit - initialize software state
-+ */
-+static void udc_reinit(struct pxa27x_udc *dev)
-+{
-+	u32	i;
-+
-+	dev->ep0state = EP0_IDLE;
-+
-+	/* basic endpoint records init */
-+	for (i = 0; i < UDC_EP_NUM; i++) {
-+		struct pxa27x_ep *ep = &dev->ep[i];
-+
-+		ep->stopped = 0;
-+		ep->pio_irqs = ep->dma_irqs = 0;
-+	}
-+	dev->configuration = 0;
-+	dev->interface = 0;
-+	dev->alternate = 0;
-+	/* the rest was statically initialized, and is read-only */
-+}
-+
-+/* until it's enabled, this UDC should be completely invisible
-+ * to any USB host.
-+ */
-+static void udc_enable (struct pxa27x_udc *dev)
-+{
-+	udc_clear_mask_UDCCR(UDCCR_UDE);
-+
-+        /* Enable clock for USB device */
-+	pxa_set_cken(CKEN11_USB, 1);
-+
-+	UDCICR0 = UDCICR1 = 0;
-+
-+	ep0_idle(dev);
-+	dev->gadget.speed = USB_SPEED_FULL;
-+	dev->stats.irqs = 0;
-+
-+	udc_set_mask_UDCCR(UDCCR_UDE);
-+	udelay (2);
-+	if (UDCCR & UDCCR_EMCE)	
-+	{
-+		printk(KERN_ERR ": There are error in configuration, udc disabled\n");
-+	}
-+	
-+	/* caller must be able to sleep in order to cope
-+	 * with startup transients.
-+	 */
-+	msleep(100);
-+
-+	/* enable suspend/resume and reset irqs */
-+	UDCICR1 = UDCICR1_IECC | UDCICR1_IERU | UDCICR1_IESU | UDCICR1_IERS;
-+
-+	/* enable ep0 irqs */
-+	UDCICR0 = UDCICR_INT(0,UDCICR_INT_MASK);
-+#if 0
-+	for(i=1; i < UDC_EP_NUM; i++) {
-+		if (dev->ep[i].assigned)
-+			pio_irq_enable(i);
-+	}
-+#endif
-+
-+	if (dev->mach->gpio_pullup)
-+		GPSR(dev->mach->gpio_pullup) = GPIO_bit(dev->mach->gpio_pullup);
-+	if (dev->mach->udc_command)
-+		dev->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
-+
-+	/* FIXME */
-+	let_usb_appear();
-+}
-+
-+
-+/* when a driver is successfully registered, it will receive
-+ * control requests including set_configuration(), which enables
-+ * non-control requests.  then usb traffic follows until a
-+ * disconnect is reported.  then a host may connect again, or
-+ * the driver might get unbound.
-+ */
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+	struct pxa27x_udc	*dev = the_controller;
-+	int			retval;
-+
-+	DMSG("dev=0x%x, driver=0x%x, speed=%d, "
-+			"bind=0x%x, unbind=0x%x, disconnect=0x%x, setup=0x%x\n",
-+			(unsigned)dev, (unsigned)driver, driver->speed, 
-+			(unsigned)driver->bind, (unsigned)driver->unbind,
-+			(unsigned)driver->disconnect, (unsigned)driver->setup);
-+
-+	if (!driver 	|| driver->speed != USB_SPEED_FULL
-+			|| !driver->bind
-+			|| !driver->unbind
-+			|| !driver->disconnect
-+			|| !driver->setup)
-+		return -EINVAL;
-+	if (!dev)
-+		return -ENODEV;
-+	if (dev->driver)
-+		return -EBUSY;
-+	
-+	/* first hook up the driver ... */
-+	dev->driver = driver;
-+	dev->gadget.dev.driver = &driver->driver;
-+
-+	device_add(&dev->gadget.dev);
-+	retval = driver->bind(&dev->gadget);
-+	if (retval) {
-+		DMSG("bind to driver %s --> error %d\n",
-+				driver->driver.name, retval);
-+		device_del (&dev->gadget.dev);
-+
-+		dev->driver = 0;
-+		dev->gadget.dev.driver = 0;
-+		return retval;
-+	}
-+	device_create_file(dev->dev, &dev_attr_function);
-+
-+	/* ... then enable host detection and ep0; and we're ready
-+	 * for set_configuration as well as eventual disconnect.
-+	 * NOTE:  this shouldn't power up until later.
-+	 */
-+	DMSG("registered gadget driver '%s'\n", driver->driver.name);
-+	udc_enable(dev);
-+	dump_state(dev);
-+	return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+static void
-+stop_activity(struct pxa27x_udc *dev, struct usb_gadget_driver *driver)
-+{
-+	int i;
-+	
-+	DMSG("Trace path 1\n");
-+	/* don't disconnect drivers more than once */
-+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-+		driver = 0;
-+	dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+	/* prevent new request submissions, kill any outstanding requests  */
-+	for (i = 0; i < UDC_EP_NUM; i++) {
-+		struct pxa27x_ep *ep = &dev->ep[i];
-+
-+		ep->stopped = 1;
-+		nuke(ep, -ESHUTDOWN);
-+	}
-+	del_timer_sync(&dev->timer);
-+
-+	/* report disconnect; the driver is already quiesced */
-+	if (driver)
-+		driver->disconnect(&dev->gadget);
-+
-+	/* re-init driver-visible data structures */
-+	udc_reinit(dev);
-+}
-+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+	struct pxa27x_udc	*dev = the_controller;
-+
-+	if (!dev)
-+		return -ENODEV;
-+	if (!driver || driver != dev->driver)
-+		return -EINVAL;
-+
-+	local_irq_disable();
-+	udc_disable(dev);
-+	stop_activity(dev, driver);
-+	local_irq_enable();
-+
-+	driver->unbind(&dev->gadget);
-+	dev->driver = 0;
-+
-+	device_del (&dev->gadget.dev);
-+	device_remove_file(dev->dev, &dev_attr_function);
-+
-+	DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
-+	dump_state(dev);
-+	return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+#ifndef	enable_disconnect_irq
-+#define	enable_disconnect_irq()		do {} while (0)
-+#define	disable_disconnect_irq()	do {} while (0)
-+#endif
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static inline void clear_ep_state (struct pxa27x_udc *dev)
-+{
-+	unsigned i;
-+
-+	/* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
-+	 * fifos, and pending transactions mustn't be continued in any case.
-+	 */
-+	for (i = 1; i < UDC_EP_NUM; i++)
-+		nuke(&dev->ep[i], -ECONNABORTED);
-+}
-+
-+static void udc_watchdog(unsigned long _dev)
-+{
-+	struct pxa27x_udc	*dev = (void *)_dev;
-+
-+	local_irq_disable();
-+	if (dev->ep0state == EP0_STALL
-+			&& (UDCCSR0 & UDCCSR0_FST) == 0
-+			&& (UDCCSR0 & UDCCSR0_SST) == 0) {
-+		UDCCSR0 = UDCCSR0_FST|UDCCSR0_FTF;
-+		DBG(DBG_VERBOSE, "ep0 re-stall\n");
-+		start_watchdog(dev);
-+	}
-+	local_irq_enable();
-+}
-+
-+static void handle_ep0 (struct pxa27x_udc *dev)
-+{
-+	u32			udccsr0 = UDCCSR0;
-+	struct pxa27x_ep	*ep = &dev->ep [0];
-+	struct pxa27x_request	*req;
-+	union {
-+		struct usb_ctrlrequest	r;
-+		u8			raw [8];
-+		u32			word [2];
-+	} u;
-+
-+	if (list_empty(&ep->queue))
-+		req = 0;
-+	else
-+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+
-+	/* clear stall status */
-+	if (udccsr0 & UDCCSR0_SST) {
-+		nuke(ep, -EPIPE);
-+		UDCCSR0 = UDCCSR0_SST;
-+		del_timer(&dev->timer);
-+		ep0_idle(dev);
-+	}
-+
-+	/* previous request unfinished?  non-error iff back-to-back ... */
-+	if ((udccsr0 & UDCCSR0_SA) != 0 && dev->ep0state != EP0_IDLE) {
-+		nuke(ep, 0);
-+		del_timer(&dev->timer);
-+		ep0_idle(dev);
-+	}
-+
-+	switch (dev->ep0state) {
-+	case EP0_NO_ACTION:
-+		printk(KERN_INFO"%s: Busy\n", __FUNCTION__);
-+		/*Fall through */
-+	case EP0_IDLE:
-+		/* late-breaking status? */
-+		udccsr0 = UDCCSR0;
-+
-+		/* start control request? */
-+		if (likely((udccsr0 & (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))
-+				== (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))) {
-+			int i;
-+
-+			nuke (ep, -EPROTO);
-+			/* read SETUP packet */
-+			for (i = 0; i < 2; i++) {
-+				if (unlikely(!(UDCCSR0 & UDCCSR0_RNE))) {
-+bad_setup:
-+					DMSG("SETUP %d!\n", i);
-+					goto stall;
-+				}
-+				u.word [i] =  UDCDR0;
-+			}
-+			if (unlikely((UDCCSR0 & UDCCSR0_RNE) != 0))
-+				goto bad_setup;
-+
-+			le16_to_cpus (&u.r.wValue);
-+			le16_to_cpus (&u.r.wIndex);
-+			le16_to_cpus (&u.r.wLength);
-+
-+			LED_EP0_ON;
-+
-+			DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-+				u.r.bRequestType, u.r.bRequest,
-+				u.r.wValue, u.r.wIndex, u.r.wLength);
-+			/* cope with automagic for some standard requests. */
-+			dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
-+						== USB_TYPE_STANDARD;
-+			dev->req_config = 0;
-+			dev->req_pending = 1;
-+#if 0			
-+			switch (u.r.bRequest) {
-+			/* hardware was supposed to hide this */
-+			case USB_REQ_SET_CONFIGURATION:
-+			case USB_REQ_SET_INTERFACE:
-+			case USB_REQ_SET_ADDRESS:
-+				printk(KERN_ERR "Should not come here\n");
-+				break;
-+			}
-+
-+#endif		
-+			if (u.r.bRequestType & USB_DIR_IN)
-+				dev->ep0state = EP0_IN_DATA_PHASE;
-+			else
-+				dev->ep0state = EP0_OUT_DATA_PHASE;
-+			i = dev->driver->setup(&dev->gadget, &u.r);
-+
-+			if (i < 0) {
-+				/* hardware automagic preventing STALL... */
-+				if (dev->req_config) {
-+					/* hardware sometimes neglects to tell
-+					 * tell us about config change events,
-+					 * so later ones may fail...
-+					 */
-+					WARN("config change %02x fail %d?\n",
-+						u.r.bRequest, i);
-+					return;
-+					/* TODO experiment:  if has_cfr,
-+					 * hardware didn't ACK; maybe we
-+					 * could actually STALL!
-+					 */
-+				}
-+				DBG(DBG_VERBOSE, "protocol STALL, "
-+					"%02x err %d\n", UDCCSR0, i);
-+stall:
-+				/* the watchdog timer helps deal with cases
-+				 * where udc seems to clear FST wrongly, and
-+				 * then NAKs instead of STALLing.
-+				 */
-+				ep0start(dev, UDCCSR0_FST|UDCCSR0_FTF, "stall");
-+				start_watchdog(dev);
-+				dev->ep0state = EP0_STALL;
-+				LED_EP0_OFF;
-+
-+			/* deferred i/o == no response yet */
-+			} else if (dev->req_pending) {
-+				if (likely(dev->ep0state == EP0_IN_DATA_PHASE
-+						|| dev->req_std || u.r.wLength))
-+					ep0start(dev, 0, "defer");
-+				else
-+					ep0start(dev, UDCCSR0_IPR, "defer/IPR");
-+			}
-+
-+			/* expect at least one data or status stage irq */
-+			return;
-+
-+		} else {
-+			/* some random early IRQ:
-+			 * - we acked FST
-+			 * - IPR cleared
-+			 * - OPC got set, without SA (likely status stage)
-+			 */
-+			UDCCSR0 = udccsr0 & (UDCCSR0_SA|UDCCSR0_OPC);
-+		}
-+		break;
-+	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
-+		if (udccsr0 & UDCCSR0_OPC) {
-+			UDCCSR0 = UDCCSR0_OPC|UDCCSR0_FTF;
-+			DBG(DBG_VERBOSE, "ep0in premature status\n");
-+			if (req) 
-+				done(ep, req, 0);
-+			ep0_idle(dev);
-+		} else /* irq was IPR clearing */ {
-+			if (req) {
-+				/* this IN packet might finish the request */
-+				(void) write_ep0_fifo(ep, req);
-+			} /* else IN token before response was written */
-+		}
-+		break;
-+	case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR etc */
-+		if (udccsr0 & UDCCSR0_OPC) {
-+			if (req) {
-+				/* this OUT packet might finish the request */
-+				if (read_ep0_fifo(ep, req))
-+					done(ep, req, 0);
-+				/* else more OUT packets expected */
-+			} /* else OUT token before read was issued */
-+		} else /* irq was IPR clearing */ {
-+			DBG(DBG_VERBOSE, "ep0out premature status\n");
-+			if (req)
-+				done(ep, req, 0);
-+			ep0_idle(dev);
-+		}
-+		break;
-+	case EP0_STALL:
-+		UDCCSR0 = UDCCSR0_FST;
-+		break;
-+		}
-+	UDCISR0 = UDCISR_INT(0, UDCISR_INT_MASK);
-+}
-+
-+
-+static void handle_ep(struct pxa27x_ep *ep)
-+{
-+	struct pxa27x_request	*req;
-+	int			completed;
-+	u32			udccsr=0;
-+
-+	DMSG("%s is called\n", __FUNCTION__);
-+	do {
-+		completed = 0;
-+		if (likely (!list_empty(&ep->queue))) {
-+			req = list_entry(ep->queue.next,
-+					struct pxa27x_request, queue);
-+		} else
-+			req = 0;
-+			
-+//		udccsr = *ep->reg_udccsr;
-+		DMSG("%s: req:%p, udcisr0:0x%x udccsr %p:0x%x\n", __FUNCTION__, 
-+				req, UDCISR0, ep->reg_udccsr, *ep->reg_udccsr);
-+		if (unlikely(ep->dir_in)) {
-+			udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
-+			if (unlikely (udccsr))
-+				*ep->reg_udccsr = udccsr;
-+
-+			if (req && likely ((*ep->reg_udccsr & UDCCSR_FS) != 0))
-+				completed = write_fifo(ep, req);
-+
-+		} else {
-+			udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
-+			if (unlikely(udccsr))
-+				*ep->reg_udccsr = udccsr;
-+
-+			/* fifos can hold packets, ready for reading... */
-+			if (likely(req)) {
-+				completed = read_fifo(ep, req);
-+			} else {
-+				pio_irq_disable (ep->ep_num);
-+				*ep->reg_udccsr = UDCCSR_FEF;
-+				DMSG("%s: no req for out data\n",
-+						__FUNCTION__);
-+			}
-+		}
-+		ep->pio_irqs++;
-+	} while (completed);
-+}
-+
-+static void pxa27x_change_configuration (struct pxa27x_udc *dev)
-+{
-+	struct usb_ctrlrequest req ;
-+
-+	req.bRequestType = 0;
-+	req.bRequest = USB_REQ_SET_CONFIGURATION;
-+	req.wValue = dev->configuration;
-+	req.wIndex = 0;
-+	req.wLength = 0;
-+	 
-+	dev->ep0state = EP0_NO_ACTION;
-+	dev->driver->setup(&dev->gadget, &req);
-+
-+}
-+
-+static void pxa27x_change_interface (struct pxa27x_udc *dev)
-+{
-+	struct usb_ctrlrequest  req;
-+
-+	req.bRequestType = USB_RECIP_INTERFACE;
-+	req.bRequest = USB_REQ_SET_INTERFACE;
-+	req.wValue = dev->alternate;
-+	req.wIndex = dev->interface;
-+	req.wLength = 0;
-+	
-+	dev->ep0state = EP0_NO_ACTION;
-+	dev->driver->setup(&dev->gadget, &req);
-+}
-+
-+/*
-+ *	pxa27x_udc_irq - interrupt handler
-+ *
-+ * avoid delays in ep0 processing. the control handshaking isn't always
-+ * under software control (pxa250c0 and the pxa255 are better), and delays
-+ * could cause usb protocol errors.
-+ */
-+static irqreturn_t pxa27x_udc_irq(int irq, void *_dev)
-+{
-+	struct pxa27x_udc	*dev = _dev;
-+	int			handled;
-+
-+	dev->stats.irqs++;
-+	HEX_DISPLAY(dev->stats.irqs);
-+
-+	DBG(DBG_VERBOSE, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
-+			"UDCCR:0x%08x\n", UDCISR0, UDCISR1, UDCCR);
-+
-+	do {
-+		u32 udcir = UDCISR1 & 0xF8000000;
-+
-+		handled = 0;
-+
-+		/* SUSpend Interrupt Request */
-+		if (unlikely(udcir & UDCISR1_IRSU)) {
-+			UDCISR1 = UDCISR1_IRSU;
-+			handled = 1;
-+			DBG(DBG_VERBOSE, "USB suspend\n");
-+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
-+					&& dev->driver
-+					&& dev->driver->suspend)
-+				dev->driver->suspend(&dev->gadget);
-+			ep0_idle (dev);
-+		}
-+
-+		/* RESume Interrupt Request */
-+		if (unlikely(udcir & UDCISR1_IRRU)) {
-+			UDCISR1 = UDCISR1_IRRU;
-+			handled = 1;
-+			DBG(DBG_VERBOSE, "USB resume\n");
-+
-+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
-+					&& dev->driver
-+					&& dev->driver->resume)
-+				dev->driver->resume(&dev->gadget);
-+		}
-+
-+		if (unlikely(udcir & UDCISR1_IRCC)) {
-+			unsigned config, interface, alternate;
-+			
-+			handled = 1;
-+			DBG(DBG_VERBOSE, "USB SET_CONFIGURATION or "
-+				"SET_INTERFACE command received\n");
-+
-+			UDCCR |= UDCCR_SMAC;
-+			
-+			config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S;
-+
-+			if (dev->configuration != config) {
-+				dev->configuration = config;
-+				pxa27x_change_configuration(dev) ;
-+			}
-+		
-+			interface =  (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S;
-+			alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S;
-+
-+			if ( (dev->configuration != interface) || \
-+					(dev->alternate != alternate)){
-+				dev->interface = config;
-+				dev->alternate = alternate;
-+				pxa27x_change_interface(dev);
-+			}
-+
-+			UDCISR1 = UDCISR1_IRCC;
-+			DMSG("%s: con:%d,inter:%d,alt:%d\n",
-+				__FUNCTION__, config,interface, alternate);
-+		}
-+
-+		/* ReSeT Interrupt Request - USB reset */
-+		if (unlikely(udcir & UDCISR1_IRRS)) {
-+			UDCISR1 = UDCISR1_IRRS;
-+			handled = 1;
-+
-+			if ((UDCCR & UDCCR_UDA) == 0) {
-+				DBG(DBG_VERBOSE, "SB reset start\n");
-+				
-+				/* reset driver and endpoints,
-+				 * in case that's not yet done
-+				 */
-+				stop_activity (dev, dev->driver);
-+
-+			} 
-+			INFO("USB reset\n");
-+			dev->gadget.speed = USB_SPEED_FULL;
-+			memset(&dev->stats, 0, sizeof dev->stats);
-+
-+		} else {
-+			u32	udcisr0 = UDCISR0 ;
-+			u32	udcisr1 = UDCISR1 & 0xFFFF;
-+			int	i;
-+
-+			if (unlikely (!udcisr0 && !udcisr1))
-+				continue;
-+
-+			DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", udcisr1,udcisr0);
-+			
-+			/* control traffic */
-+			if (udcisr0 & UDCISR0_IR0) {
-+				dev->ep[0].pio_irqs++;
-+				handle_ep0(dev);
-+				handled = 1;
-+			}
-+			
-+			udcisr0 >>= 2;
-+			/* endpoint data transfers */
-+			for (i = 1; udcisr0!=0 && i < 16; udcisr0>>=2,i++) {
-+				UDCISR0 = UDCISR_INT(i, UDCISR_INT_MASK);
-+				
-+				if (udcisr0 & UDC_INT_FIFOERROR)
-+					printk(KERN_ERR" Endpoint %d Fifo error\n", i);
-+				if (udcisr0 & UDC_INT_PACKETCMP) {
-+					handle_ep(&dev->ep[i]);
-+					handled = 1;
-+				}
-+				
-+			}
-+
-+			for (i = 0; udcisr1!=0 && i < 8; udcisr1 >>= 2, i++) {
-+				UDCISR1 = UDCISR_INT(i, UDCISR_INT_MASK);
-+				
-+				if (udcisr1 & UDC_INT_FIFOERROR) {
-+					printk(KERN_ERR" Endpoint %d fifo error\n", (i+16));
-+				}
-+				
-+				if (udcisr1 & UDC_INT_PACKETCMP) {
-+					handle_ep(&dev->ep[i+16]);
-+					handled = 1;
-+				}
-+			}
-+		}
-+
-+		/* we could also ask for 1 msec SOF (SIR) interrupts */
-+
-+	} while (handled);
-+	return IRQ_HANDLED;
-+}
-+
-+static void udc_init_ep(struct pxa27x_udc *dev) 
-+{
-+	int i;
-+
-+	INIT_LIST_HEAD (&dev->gadget.ep_list);
-+	INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
-+	
-+	for (i = 0; i < UDC_EP_NUM; i++) {
-+		struct pxa27x_ep *ep = &dev->ep[i];
-+
-+		ep->dma = -1;
-+		if (i != 0) {
-+			memset(ep, 0, sizeof(*ep));
-+		}
-+		INIT_LIST_HEAD (&ep->queue);
-+	}
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void nop_release (struct device *dev)
-+{
-+	DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
-+}
-+
-+/* this uses load-time allocation and initialization (instead of
-+ * doing it at run-time) to save code, eliminate fault paths, and
-+ * be more obviously correct.
-+ */
-+static struct pxa27x_udc memory = {
-+	.gadget = {
-+		.ops		= &pxa27x_udc_ops,
-+		.ep0		= &memory.ep[0].ep,
-+		.name		= driver_name,
-+		.dev = {
-+			.bus_id		= "gadget",
-+			.release	= nop_release,
-+		},
-+	},
-+
-+	/* control endpoint */
-+	.ep[0] = {
-+		.ep = {
-+			.name		= ep0name,
-+			.ops		= &pxa27x_ep_ops,
-+			.maxpacket	= EP0_FIFO_SIZE,
-+		},
-+		.dev		= &memory,
-+		.reg_udccsr	= &UDCCSR0,
-+		.reg_udcdr	= &UDCDR0,
-+	}
-+};
-+
-+#define CP15R0_VENDOR_MASK	0xffffe000
-+
-+#define CP15R0_XSCALE_VALUE	0x69054000	/* intel/arm/xscale */
-+
-+/*
-+ * 	probe - binds to the platform device
-+ */
-+static int pxa27x_udc_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct pxa27x_udc *udc = &memory;
-+	int retval;
-+	u32 chiprev;
-+
-+	/* insist on Intel/ARM/XScale */
-+	asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
-+	if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
-+		printk(KERN_ERR "%s: not XScale!\n", driver_name);
-+		return -ENODEV;
-+	} 
-+	/* other non-static parts of init */
-+	udc->dev = dev;
-+	udc->mach = dev->platform_data;
-+
-+	/* FIXME */
-+	if (udc->mach->gpio_pullup)
-+        	pxa_gpio_mode((udc->mach->gpio_pullup & GPIO_MD_MASK_NR) | \
-+               			GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+	init_timer(&udc->timer);
-+	udc->timer.function = udc_watchdog;
-+	udc->timer.data = (unsigned long) udc;
-+
-+	device_initialize(&udc->gadget.dev);
-+	udc->gadget.dev.parent = dev;
-+	udc->gadget.dev.dma_mask = dev->dma_mask;
-+
-+	the_controller = udc;
-+	dev_set_drvdata(dev, udc);
-+
-+	udc_disable(udc);
-+	udc_init_ep(udc);
-+	udc_reinit(udc);
-+
-+	/* irq setup after old hardware state is cleaned up */
-+	retval = request_irq(IRQ_USB, pxa27x_udc_irq,
-+			SA_INTERRUPT, driver_name, udc);
-+	if (retval != 0) {
-+		printk(KERN_ERR "%s: can't get irq %i, err %d\n",
-+			driver_name, IRQ_USB, retval);
-+		return -EBUSY;
-+	}
-+	udc->got_irq = 1;
-+
-+	create_proc_files();
-+
-+	return 0;
-+}
-+
-+static int pxa27x_udc_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct pxa27x_udc *udc = dev->driver_data;
-+
-+	udc_disable(udc);
-+	remove_proc_files();
-+	usb_gadget_unregister_driver(udc->driver);
-+
-+	if (udc->got_irq) {
-+		free_irq(IRQ_USB, udc);
-+		udc->got_irq = 0;
-+	}
-+	if (machine_is_lubbock() && udc->got_disc) {
-+		free_irq(LUBBOCK_USB_DISC_IRQ, udc);
-+		udc->got_disc = 0;
-+	}
-+	dev_set_drvdata(dev, 0);
-+	the_controller = 0;
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int pxa27x_udc_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct pxa27x_udc *udc = dev->driver_data;
-+	int i;
-+
-+	DMSG("%s will go into SUSPEND_POWER_DOWN\n", __FUNCTION__);
-+	udc->udccsr0 = UDCCSR0;
-+	for(i=1; (i<UDC_EP_NUM); i++) {
-+		if (udc->ep[i].assigned) {
-+			struct pxa27x_ep *ep = &udc->ep[i];
-+			
-+			ep->udccsr_value = *ep->reg_udccsr;
-+			ep->udccr_value = *ep->reg_udccr;
-+			DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
-+				i, *ep->reg_udccsr, *ep->reg_udccr);
-+		}			
-+	}
-+
-+	udc_clear_mask_UDCCR(UDCCR_UDE);
-+	pxa_set_cken(CKEN11_USB, 0);
-+
-+	return 0;
-+}
-+
-+static int pxa27x_udc_resume(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct pxa27x_udc *udc = dev->driver_data;
-+	int i;
-+
-+	DMSG("%s: udc resume\n", __FUNCTION__);
-+		
-+	UDCCSR0 = udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME);
-+	for (i=1; i < UDC_EP_NUM; i++) {
-+		if (udc->ep[i].assigned) {
-+			struct pxa27x_ep *ep = &udc->ep[i];
-+			
-+			*ep->reg_udccsr = ep->udccsr_value;
-+			*ep->reg_udccr = ep->udccr_value;
-+			DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
-+				i, *ep->reg_udccsr, *ep->reg_udccr);
-+		}
-+	}
-+	udc_enable(udc);
-+	/* OTGPH bit is set when sleep mode is entered. 
-+	 * it indicates that OTG pad is retaining its state.
-+	 * Upon exit from sleep mode and before clearing OTGPH,
-+	 * Software must configure the USB OTG pad, UDC, and UHC
-+	 * to the state they were in before entering sleep mode.*/
-+	PSSR  |= PSSR_OTGPH;
-+
-+	return 0;
-+}
-+#else
-+#define pxa27x_udc_suspend	NULL
-+#define pxa27x_udc_resume	NULL
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct platform_driver pxa27x_udc_driver = {
-+	.probe		= pxa27x_udc_probe,
-+	.remove		= pxa27x_udc_remove,
-+	.suspend	= pxa27x_udc_suspend,
-+	.resume		= pxa27x_udc_resume,
-+	.driver		= {
-+		.name		= "pxa2xx-udc",
-+	},
-+};
-+
-+static int __init udc_init(void)
-+{
-+	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
-+	return platform_driver_register(&pxa27x_udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit(void)
-+{
-+	platform_driver_unregister(&pxa27x_udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
-new file mode 100644
-index 0000000..c4b72a2
---- /dev/null
-+++ b/drivers/usb/gadget/pxa27x_udc.h
-@@ -0,0 +1,329 @@
-+/*
-+ * linux/drivers/usb/gadget/pxa27x_udc.h
-+ * Intel PXA27x on-chip full speed USB device controller
-+ *
-+ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
-+ * Copyright (C) 2003 David Brownell
-+ * Copyright (C) 2004 Intel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __LINUX_USB_GADGET_PXA27X_H
-+#define __LINUX_USB_GADGET_PXA27X_H
-+
-+#include <linux/types.h>
-+
-+struct pxa27x_udc;
-+
-+struct pxa27x_ep {
-+	struct usb_ep				ep;
-+	struct pxa27x_udc			*dev;
-+
-+	const struct usb_endpoint_descriptor	*desc;
-+	struct list_head			queue;
-+	unsigned long				pio_irqs;
-+	unsigned long				dma_irqs;
-+	
-+	int					dma; 
-+	unsigned				fifo_size;
-+	unsigned				ep_num;
-+	unsigned				ep_type;
-+
-+	unsigned				stopped : 1;
-+	unsigned				dma_con : 1;
-+	unsigned				dir_in : 1;
-+	unsigned				assigned : 1;
-+
-+	unsigned				config;
-+	unsigned				interface;
-+	unsigned				aisn;
-+	/* UDCCSR = UDC Control/Status Register for this EP
-+	 * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
-+	 * UDCDR = UDC Endpoint Data Register (the fifo)
-+	 * UDCCR = UDC Endpoint Configuration Registers
-+	 * DRCM = DMA Request Channel Map
-+	 */
-+	volatile u32				*reg_udccsr;
-+	volatile u32				*reg_udcbcr;
-+	volatile u32				*reg_udcdr;
-+	volatile u32				*reg_udccr;
-+#ifdef USE_DMA
-+	volatile u32				*reg_drcmr;
-+#define	drcmr(n)  .reg_drcmr = & DRCMR ## n ,
-+#else
-+#define	drcmr(n)  
-+#endif
-+
-+#ifdef CONFIG_PM
-+	unsigned				udccsr_value;
-+	unsigned				udccr_value;
-+#endif
-+};
-+
-+struct pxa27x_request {
-+	struct usb_request			req;
-+	struct list_head			queue;
-+};
-+
-+enum ep0_state { 
-+	EP0_IDLE,
-+	EP0_IN_DATA_PHASE,
-+	EP0_OUT_DATA_PHASE,
-+//	EP0_END_XFER,
-+	EP0_STALL,
-+	EP0_NO_ACTION
-+};
-+
-+#define EP0_FIFO_SIZE	((unsigned)16)
-+#define BULK_FIFO_SIZE	((unsigned)64)
-+#define ISO_FIFO_SIZE	((unsigned)256)
-+#define INT_FIFO_SIZE	((unsigned)8)
-+
-+struct udc_stats {
-+	struct ep0stats {
-+		unsigned long		ops;
-+		unsigned long		bytes;
-+	} read, write;
-+	unsigned long			irqs;
-+};
-+
-+#ifdef CONFIG_USB_PXA27X_SMALL
-+/* when memory's tight, SMALL config saves code+data.  */
-+//#undef	USE_DMA
-+//#define	UDC_EP_NUM	3
-+#endif
-+
-+#ifndef	UDC_EP_NUM
-+#define	UDC_EP_NUM	24
-+#endif
-+
-+struct pxa27x_udc {
-+	struct usb_gadget			gadget;
-+	struct usb_gadget_driver		*driver;
-+
-+	enum ep0_state				ep0state;
-+	struct udc_stats			stats;
-+	unsigned				got_irq : 1,
-+						got_disc : 1,
-+						has_cfr : 1,
-+						req_pending : 1,
-+						req_std : 1,
-+						req_config : 1;
-+
-+#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
-+	struct timer_list			timer;
-+
-+	struct device				*dev;
-+	struct pxa2xx_udc_mach_info		*mach;
-+	u64					dma_mask;
-+	struct pxa27x_ep			ep [UDC_EP_NUM];
-+
-+	unsigned				configuration, 
-+						interface, 
-+						alternate;
-+#ifdef CONFIG_PM
-+	unsigned				udccsr0;
-+#endif
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+#if 0
-+#ifdef DEBUG
-+#define HEX_DISPLAY(n)	do { \
-+	if (machine_is_mainstone())\
-+		 { MST_LEDDAT1 = (n); } \
-+	} while(0)
-+
-+#define HEX_DISPLAY1(n)	HEX_DISPLAY(n)
-+
-+#define HEX_DISPLAY2(n)	do { \
-+	if (machine_is_mainstone()) \
-+		{ MST_LEDDAT2 = (n); } \
-+	} while(0)
-+
-+#endif /* DEBUG */
-+#endif
-+/*-------------------------------------------------------------------------*/
-+
-+/* LEDs are only for debug */
-+#ifndef HEX_DISPLAY
-+#define HEX_DISPLAY(n)		do {} while(0)
-+#endif
-+
-+#ifndef LED_CONNECTED_ON
-+#define LED_CONNECTED_ON	do {} while(0)
-+#define LED_CONNECTED_OFF	do {} while(0)
-+#endif
-+#ifndef LED_EP0_ON
-+#define LED_EP0_ON		do {} while (0)
-+#define LED_EP0_OFF		do {} while (0)
-+#endif
-+
-+static struct pxa27x_udc *the_controller;
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* one GPIO should be used to detect host disconnect */
-+static inline int is_usb_connected(void)
-+{
-+	if (!the_controller->mach->udc_is_connected)
-+		return 1;
-+	return the_controller->mach->udc_is_connected();
-+}
-+
-+/* one GPIO should force the host to see this device (or not) */
-+static inline void make_usb_disappear(void)
-+{
-+	if (!the_controller->mach->udc_command)
-+		return;
-+	the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
-+}
-+
-+static inline void let_usb_appear(void)
-+{
-+	if (!the_controller->mach->udc_command)
-+		return;
-+	the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * Debugging support vanishes in non-debug builds.  DBG_NORMAL should be
-+ * mostly silent during normal use/testing, with no timing side-effects.
-+ */
-+#define DBG_NORMAL	1	/* error paths, device state transitions */
-+#define DBG_VERBOSE	2	/* add some success path trace info */
-+#define DBG_NOISY	3	/* ... even more: request level */
-+#define DBG_VERY_NOISY	4	/* ... even more: packet level */
-+
-+#ifdef DEBUG
-+
-+static const char *state_name[] = {
-+	"EP0_IDLE",
-+	"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
-+	"EP0_END_XFER", "EP0_STALL"
-+};
-+
-+#define DMSG(stuff...) printk(KERN_ERR "udc: " stuff)
-+
-+#ifdef VERBOSE
-+#    define UDC_DEBUG DBG_VERBOSE
-+#else
-+#    define UDC_DEBUG DBG_NORMAL
-+#endif
-+
-+static void __attribute__ ((__unused__))
-+dump_udccr(const char *label)
-+{
-+	u32	udccr = UDCCR;
-+	DMSG("%s 0x%08x =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n",
-+		label, udccr,
-+		(udccr & UDCCR_OEN) ? " oen":"",
-+		(udccr & UDCCR_AALTHNP) ? " aalthnp":"",
-+		(udccr & UDCCR_AHNP) ? " rem" : "",
-+		(udccr & UDCCR_BHNP) ? " rstir" : "",
-+		(udccr & UDCCR_DWRE) ? " dwre" : "",
-+		(udccr & UDCCR_SMAC) ? " smac" : "",
-+		(udccr & UDCCR_EMCE) ? " emce" : "",
-+		(udccr & UDCCR_UDR) ? " udr" : "",
-+		(udccr & UDCCR_UDA) ? " uda" : "",
-+		(udccr & UDCCR_UDE) ? " ude" : "",
-+		(udccr & UDCCR_ACN) >> UDCCR_ACN_S,
-+		(udccr & UDCCR_AIN) >> UDCCR_AIN_S,
-+		(udccr & UDCCR_AAISN)>> UDCCR_AAISN_S );
-+}
-+
-+static void __attribute__ ((__unused__))
-+dump_udccsr0(const char *label)
-+{
-+	u32		udccsr0 = UDCCSR0;
-+
-+	DMSG("%s %s 0x%08x =%s%s%s%s%s%s%s\n",
-+		label, state_name[the_controller->ep0state], udccsr0,
-+		(udccsr0 & UDCCSR0_SA) ? " sa" : "",
-+		(udccsr0 & UDCCSR0_RNE) ? " rne" : "",
-+		(udccsr0 & UDCCSR0_FST) ? " fst" : "",
-+		(udccsr0 & UDCCSR0_SST) ? " sst" : "",
-+		(udccsr0 & UDCCSR0_DME) ? " dme" : "",
-+		(udccsr0 & UDCCSR0_IPR) ? " ipr" : "",
-+		(udccsr0 & UDCCSR0_OPC) ? " opr" : "");
-+}
-+
-+static void __attribute__ ((__unused__))
-+dump_state(struct pxa27x_udc *dev)
-+{
-+	unsigned	i;
-+
-+	DMSG("%s, udcicr %02X.%02X, udcsir %02X.%02x, udcfnr %02X\n",
-+		state_name[dev->ep0state],
-+		UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
-+	dump_udccr("udccr");
-+
-+	if (!dev->driver) {
-+		DMSG("no gadget driver bound\n");
-+		return;
-+	} else
-+		DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
-+
-+	
-+	dump_udccsr0 ("udccsr0");
-+	DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
-+		dev->stats.write.bytes, dev->stats.write.ops,
-+		dev->stats.read.bytes, dev->stats.read.ops);
-+
-+	for (i = 1; i < UDC_EP_NUM; i++) {
-+		if (dev->ep [i].desc == 0)
-+			continue;
-+		DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccsr);
-+	}
-+}
-+
-+#if 0
-+static void dump_regs(u8 ep)
-+{
-+	DMSG("EP:%d UDCCSR:0x%08x UDCBCR:0x%08x\n UDCCR:0x%08x\n",
-+		ep,UDCCSN(ep), UDCBCN(ep), UDCCN(ep));
-+}
-+static void dump_req (struct pxa27x_request *req)
-+{
-+	struct usb_request *r = &req->req;
-+
-+	DMSG("%s: buf:0x%08x length:%d dma:0x%08x actual:%d\n",
-+			__FUNCTION__, (unsigned)r->buf, r->length, 
-+			r->dma,	r->actual);
-+}
-+#endif
-+
-+#else
-+
-+#define DMSG(stuff...)		do{}while(0)
-+
-+#define	dump_udccr(x)	do{}while(0)
-+#define	dump_udccsr0(x)	do{}while(0)
-+#define	dump_state(x)	do{}while(0)
-+
-+#define UDC_DEBUG ((unsigned)0)
-+
-+#endif
-+
-+#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
-+
-+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
-+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
-+
-+
-+#endif /* __LINUX_USB_GADGET_PXA27X_H */
-diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
-index e552668..971e491 100644
---- a/drivers/usb/gadget/serial.c
-+++ b/drivers/usb/gadget/serial.c
-@@ -1378,20 +1378,20 @@ static int __init gs_bind(struct usb_gadget *gadget)
- 
- 	usb_ep_autoconfig_reset(gadget);
- 
--	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
-+	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc, 0, 0, 0);
- 	if (!ep)
- 		goto autoconf_fail;
- 	EP_IN_NAME = ep->name;
- 	ep->driver_data = ep;	/* claim the endpoint */
- 
--	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
-+	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc, 0, 0, 0);
- 	if (!ep)
- 		goto autoconf_fail;
- 	EP_OUT_NAME = ep->name;
- 	ep->driver_data = ep;	/* claim the endpoint */
- 
- 	if (use_acm) {
--		ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
-+		ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc, 0, 0, 0);
- 		if (!ep) {
- 			printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
- 			goto autoconf_fail;
-diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
-index 8c85e33..46ffe6c 100644
---- a/drivers/usb/gadget/zero.c
-+++ b/drivers/usb/gadget/zero.c
-@@ -1155,7 +1155,7 @@ zero_bind (struct usb_gadget *gadget)
- 	 * but there may also be important quirks to address.
- 	 */
- 	usb_ep_autoconfig_reset (gadget);
--	ep = usb_ep_autoconfig (gadget, &fs_source_desc);
-+	ep = usb_ep_autoconfig (gadget, &fs_source_desc, 0, 0, 0);
- 	if (!ep) {
- autoconf_fail:
- 		printk (KERN_ERR "%s: can't autoconfigure on %s\n",
-@@ -1165,7 +1165,7 @@ autoconf_fail:
- 	EP_IN_NAME = ep->name;
- 	ep->driver_data = ep;	/* claim */
- 	
--	ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
-+	ep = usb_ep_autoconfig (gadget, &fs_sink_desc, 0, 0, 0);
- 	if (!ep)
- 		goto autoconf_fail;
- 	EP_OUT_NAME = ep->name;
-diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h
-index e17186d..64c81fd 100644
---- a/include/linux/usb_gadget.h
-+++ b/include/linux/usb_gadget.h
-@@ -445,10 +445,28 @@ usb_ep_fifo_flush (struct usb_ep *ep)
- 
- struct usb_gadget;
- 
-+/**
-+ * struct usb_endpoint_config - possible configurations of a given endpoint
-+ * @config: the configuration number
-+ * @interface: the interface number
-+ * @altinterface: the altinterface number
-+ *
-+ * Used as an array to pass information about the possible configurations
-+ * of a given endpoint to the bus controller.
-+ */
-+struct usb_endpoint_config {
-+	int     config;
-+	int     interface;
-+	int     altinterface;
-+};
-+
- /* the rest of the api to the controller hardware: device operations,
-  * which don't involve endpoints (or i/o).
-  */
- struct usb_gadget_ops {
-+	struct usb_ep*	(*ep_alloc)(struct usb_gadget *gadget,
-+				struct usb_endpoint_descriptor *desc,
-+				int config, int interface, int alt);
- 	int	(*get_frame)(struct usb_gadget *);
- 	int	(*wakeup)(struct usb_gadget *);
- 	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
-@@ -872,7 +890,8 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config,
- /* utility wrapping a simple endpoint selection policy */
- 
- extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
--			struct usb_endpoint_descriptor *) __devinit;
-+			struct usb_endpoint_descriptor *,
-+			int, int, int) __devinit;
- 
- extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit;
- 
diff --git a/packages/linux/linux-ezx-2.6.21/patches/series b/packages/linux/linux-ezx-2.6.21/patches/series
deleted file mode 100755
index 99f95a6c07..0000000000
--- a/packages/linux/linux-ezx-2.6.21/patches/series
+++ /dev/null
@@ -1,106 +0,0 @@
-patch-2.6.21.4
-mtdfix.patch
-pxa27x_overlay-r5.patch
-
-ezx-core.patch
-# ezx-core TODO: should be ezx-common
-# look at the pxa-regs.h diff and put each definition on the proper patch
-# register a machine type for each phone model
-
-# enable this patch ONLY if you have STUART connected and dont forget
-# to change your cmdline if you want console on STUART.
-#ezx-enable-stuart.patch
-
-ezx-bp.patch
-# ezx-bp TODO:
-# try to run this as a module - this may solve timing issues for opentapi.
-# suspend/resume (not sure if it can be handled here)
-# implement 2nd gen handshake support
-# move platform device to ezx-phone.c
-
-ezx-pm.patch
-
-ezx-pcap.patch
-# ezx-pcap TODO:
-# move vibrator level function to the vibrator driver
-
-a780-pcap.patch
-e680-pcap.patch
-a1200-pcap.patch
-e6-pcap.patch
-
-a780-mci.patch
-e680-mci.patch
-a1200-mci.patch
-e6-mci.patch
-
-pxa27x-udc-support.2.patch
-
-ezx-emu.patch
-# ezx-emu TODO:
-# userspace interface for controling emu
-# read adc to find which accessory is plugged
-a780-emu.patch
-e680-emu.patch
-
-pxa27x-udc-fix-a1200.patch #(see ezx-a1200.c)
-ezx-eoc.patch
-a1200-eoc.patch
-e6-eoc.patch
-
-ezx-mtd-map.patch
-
-ezx-serial-bug-workaround.patch
-
-pxa-kbd.patch
-a780-kbd.patch
-e680-kbd.patch
-a1200-kbd.patch
-
-pcap-ts.patch
-a780-ts.patch
-e680-ts.patch
-a1200-ts.patch
-e6-ts.patch
-
-ezx-backlight.patch
-
-a780-flip.patch
-e680-locksw.patch
-a1200-flip.patch
-
-a780-leds.patch
-e680-leds.patch
-
-a780-vibrator.patch
-
-# mux_cli patches
-mux_cli.patch
-mux-fix.patch
-mux-fix-init-errorpath.patch
-mux-remove-flipbuffers.patch
-mux-remove-get_halted_bit.patch
-mux-remove-usbh_finished_resume.patch
-mux-fix-makefile.patch
-mux-fix-tty-driver.patch
-mux-linux-2.6.21-fix.patch
-#mux-ifdef-ezx-features.patch
-#mux_debug.patch
-
-asoc-pxa-ssp.patch
-asoc-fix-loopback.patch
-ezx-asoc.patch
-
-# mux_cli TODO:
-# merge patches
-# try to understand the code and cleanup (painful)
-
-# Global TODO:
-# compile everything as module and test for insmod/rmmod
-#	can NOT run as module (yet)
-#		pxa-ohci, ts0710_mux, ts0710_mux_usb, ezx-bp
-
-# the folowing break too much stuff on other phones.
-
-# incomplete
-
diff --git a/packages/linux/linux-ezx-2.6.21/rokre2/defconfig b/packages/linux/linux-ezx-2.6.21/rokre2/defconfig
deleted file mode 100755
index 7e22a3c371..0000000000
--- a/packages/linux/linux-ezx-2.6.21/rokre2/defconfig
+++ /dev/null
@@ -1,1583 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.4
-# Sun Sep  9 16:52:11 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-ezxdev"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA_EZX=y
-# CONFIG_PXA_EZX_E680 is not set
-# CONFIG_PXA_EZX_A780 is not set
-CONFIG_PXA_EZX_E2=y
-# CONFIG_PXA_EZX_A1200 is not set
-# CONFIG_PXA_EZX_E6 is not set
-CONFIG_EZX_BP=y
-CONFIG_EZX_PCAP=y
-CONFIG_EZX_EMU=y
-CONFIG_EZX_EMU_USB=y
-# CONFIG_EZX_EMU_UART is not set
-# CONFIG_EZX_EMU_NOTHING is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_XIP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-CONFIG_MTD_EZX=y
-CONFIG_MTD_EZX_A780=y
-# CONFIG_MTD_EZX_A780_ALTERNATE is not set
-# CONFIG_MTD_EZX_E2 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-CONFIG_SHAPER=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=8
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_TS0710_MUX=y
-CONFIG_TS0710_MUX_USB=y
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# V4L USB devices
-#
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_USB_DSBR is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_EZX=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=y
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_SSP=y
-CONFIG_SND_PXA2XX_SOC_EZX=y
-CONFIG_SND_SOC_PCAP2=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux-ezx-2.6.21/rokre6/defconfig b/packages/linux/linux-ezx-2.6.21/rokre6/defconfig
deleted file mode 100755
index 8201825d75..0000000000
--- a/packages/linux/linux-ezx-2.6.21/rokre6/defconfig
+++ /dev/null
@@ -1,1586 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.4
-# Sat Sep 15 19:35:32 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-ezxdev"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA_EZX=y
-# CONFIG_PXA_EZX_E680 is not set
-# CONFIG_PXA_EZX_A780 is not set
-# CONFIG_PXA_EZX_E2 is not set
-# CONFIG_PXA_EZX_A1200 is not set
-CONFIG_PXA_EZX_E6=y
-CONFIG_EZX_BP=y
-CONFIG_EZX_PCAP=y
-CONFIG_EZX_EOC=y
-CONFIG_EZX_EMU=y
-CONFIG_EZX_EMU_USB=y
-# CONFIG_EZX_EMU_UART is not set
-# CONFIG_EZX_EMU_NOTHING is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_XIP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-CONFIG_MTD_EZX=y
-CONFIG_MTD_EZX_A780=y
-# CONFIG_MTD_EZX_A780_ALTERNATE is not set
-# CONFIG_MTD_EZX_A1200 is not set
-# CONFIG_MTD_EZX_E2 is not set
-# CONFIG_MTD_EZX_E6 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-CONFIG_SHAPER=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=8
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_TS0710_MUX=y
-CONFIG_TS0710_MUX_USB=y
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# V4L USB devices
-#
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_USB_DSBR is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_EZX=N
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC=y
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_SSP=y
-CONFIG_SND_PXA2XX_SOC_EZX=y
-CONFIG_SND_SOC_PCAP2=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=n
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux-ezx-2.6.21/update_patches.sh b/packages/linux/linux-ezx-2.6.21/update_patches.sh
deleted file mode 100644
index d63a1e8e7d..0000000000
--- a/packages/linux/linux-ezx-2.6.21/update_patches.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-set -e
-
-# Helper script to update patches and speedup filling the SRC_URI section of our .bb
-# Run it while in packages/linux/linux-ezx-2.6.x/
-
-[ -d patches ] && mtn drop -R patches
-rm -rf patches
-
-svn --quiet co http://svn.openezx.org/trunk/src/kernel-2.6/patches/ patches
-find patches -type f -print0 
-mtn add patches patches/*
-
-cat patches/series | grep ^[0-9A-Za-z] | sed -e 's/.*/\tfile:\/\/patches\/\0;patch=1 \\/'
-ls -1 patches/defconfig-* | sed -e 's/.*/\tfile:\/\/\0 \\/'
-