rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 236 deletions

diff --git a/packages/linux/linux-efika-2.6.20/0006-Rework-the-OHCI-quirk-mecanism-as-suggested-by-David.txt b/packages/linux/linux-efika-2.6.20/0006-Rework-the-OHCI-quirk-mecanism-as-suggested-by-David.txt
deleted file mode 100644
index 39f6fef607..0000000000
--- a/packages/linux/linux-efika-2.6.20/0006-Rework-the-OHCI-quirk-mecanism-as-suggested-by-David.txt
+++ /dev/null
@@ -1,236 +0,0 @@
-From 9282a04f14cef512736ac4a895fb48456e6a8989 Mon Sep 17 00:00:00 2001
-From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-Date: Thu, 14 Dec 2006 14:13:26 +1100
-Subject: [PATCH] [PATCH] Rework the OHCI quirk mecanism as suggested by David
-
-This patch applies David Brownell's suggestion for reworking the
-OHCI quirk mechanism via a table of PCI IDs. It adapts the existing
-quirks to use that mechanism.
-
-This also moves the quirks to reset() as suggested by the comment
-in there. This is necessary as we need to have the endian properly
-set before we try to init the controller.
-
-Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-Acked-by: David Brownell <dbrownell@users.sourceforge.net>
-
- drivers/usb/host/ohci-pci.c |  173 +++++++++++++++++++++++++++-----------------
- 1 file changed, 110 insertions(+), 63 deletions(-)
----
- drivers/usb/host/ohci-pci.c |  173 +++++++++++++++++++++++++++----------------
- 1 files changed, 110 insertions(+), 63 deletions(-)
-
-diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
-index 596e0b4..82fbec3 100644
---- a/drivers/usb/host/ohci-pci.c
-+++ b/drivers/usb/host/ohci-pci.c
-@@ -20,79 +20,128 @@
- 
- /*-------------------------------------------------------------------------*/
- 
--static int
--ohci_pci_reset (struct usb_hcd *hcd)
-+/* AMD 756, for most chips (early revs), corrupts register
-+ * values on read ... so enable the vendor workaround.
-+ */
-+static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd)
- {
- 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
- 
--	ohci_hcd_init (ohci);
--	return ohci_init (ohci);
-+	ohci->flags = OHCI_QUIRK_AMD756;
-+	ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
-+
-+	/* also erratum 10 (suspend/resume issues) */
-+	device_init_wakeup(&hcd->self.root_hub->dev, 0);
-+
-+	return 0;
- }
- 
--static int __devinit
--ohci_pci_start (struct usb_hcd *hcd)
-+/* Apple's OHCI driver has a lot of bizarre workarounds
-+ * for this chip.  Evidently control and bulk lists
-+ * can get confused.  (B&W G3 models, and ...)
-+ */
-+static int __devinit ohci_quirk_opti(struct usb_hcd *hcd)
- {
- 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
--	int		ret;
- 
--	/* REVISIT this whole block should move to reset(), which handles
--	 * all the other one-time init.
-+	ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
-+
-+	return 0;
-+}
-+
-+/* Check for NSC87560. We have to look at the bridge (fn1) to
-+ * identify the USB (fn2). This quirk might apply to more or
-+ * even all NSC stuff.
-+ */
-+static int __devinit ohci_quirk_ns(struct usb_hcd *hcd)
-+{
-+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-+	struct pci_dev	*b;
-+
-+	b  = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
-+	if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
-+	    && b->vendor == PCI_VENDOR_ID_NS) {
-+		struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-+
-+		ohci->flags |= OHCI_QUIRK_SUPERIO;
-+		ohci_dbg (ohci, "Using NSC SuperIO setup\n");
-+	}
-+	pci_dev_put(b);
-+
-+	return 0;
-+}
-+
-+/* Check for Compaq's ZFMicro chipset, which needs short
-+ * delays before control or bulk queues get re-activated
-+ * in finish_unlinks()
-+ */
-+static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-+
-+	ohci->flags |= OHCI_QUIRK_ZFMICRO;
-+	ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n");
-+
-+	return 0;
-+}
-+
-+
-+/* List of quirks for OHCI */
-+static const struct pci_device_id ohci_pci_quirks[] = {
-+	{
-+		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
-+		.driver_data = (unsigned long)ohci_quirk_amd756,
-+	},
-+	{
-+		PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
-+		.driver_data = (unsigned long)ohci_quirk_opti,
-+	},
-+	{
-+		PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
-+		.driver_data = (unsigned long)ohci_quirk_ns,
-+	},
-+	{
-+		PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
-+		.driver_data = (unsigned long)ohci_quirk_zfmicro,
-+	},
-+	/* FIXME for some of the early AMD 760 southbridges, OHCI
-+	 * won't work at all.  blacklist them.
- 	 */
-+	{},
-+};
-+
-+static int ohci_pci_reset (struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-+	int ret = 0;
-+
- 	if (hcd->self.controller) {
- 		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-+		const struct pci_device_id *quirk_id;
- 
--		/* AMD 756, for most chips (early revs), corrupts register
--		 * values on read ... so enable the vendor workaround.
--		 */
--		if (pdev->vendor == PCI_VENDOR_ID_AMD
--				&& pdev->device == 0x740c) {
--			ohci->flags = OHCI_QUIRK_AMD756;
--			ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
--			/* also erratum 10 (suspend/resume issues) */
--			device_init_wakeup(&hcd->self.root_hub->dev, 0);
-+		quirk_id = pci_match_id(ohci_pci_quirks, pdev);
-+		if (quirk_id != NULL) {
-+			int (*quirk)(struct usb_hcd *ohci);
-+			quirk = (void *)quirk_id->driver_data;
-+			ret = quirk(hcd);
- 		}
-+	}
-+	if (ret == 0) {
-+		ohci_hcd_init (ohci);
-+		return ohci_init (ohci);
-+	}
-+	return ret;
-+}
- 
--		/* FIXME for some of the early AMD 760 southbridges, OHCI
--		 * won't work at all.  blacklist them.
--		 */
--
--		/* Apple's OHCI driver has a lot of bizarre workarounds
--		 * for this chip.  Evidently control and bulk lists
--		 * can get confused.  (B&W G3 models, and ...)
--		 */
--		else if (pdev->vendor == PCI_VENDOR_ID_OPTI
--				&& pdev->device == 0xc861) {
--			ohci_dbg (ohci,
--				"WARNING: OPTi workarounds unavailable\n");
--		}
- 
--		/* Check for NSC87560. We have to look at the bridge (fn1) to
--		 * identify the USB (fn2). This quirk might apply to more or
--		 * even all NSC stuff.
--		 */
--		else if (pdev->vendor == PCI_VENDOR_ID_NS) {
--			struct pci_dev	*b;
--
--			b  = pci_get_slot (pdev->bus,
--					PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
--			if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
--					&& b->vendor == PCI_VENDOR_ID_NS) {
--				ohci->flags |= OHCI_QUIRK_SUPERIO;
--				ohci_dbg (ohci, "Using NSC SuperIO setup\n");
--			}
--			pci_dev_put(b);
--		}
-+static int __devinit ohci_pci_start (struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-+	int		ret;
- 
--		/* Check for Compaq's ZFMicro chipset, which needs short
--		 * delays before control or bulk queues get re-activated
--		 * in finish_unlinks()
--		 */
--		else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ
--				&& pdev->device  == 0xa0f8) {
--			ohci->flags |= OHCI_QUIRK_ZFMICRO;
--			ohci_dbg (ohci,
--				"enabled Compaq ZFMicro chipset quirk\n");
--		}
-+#ifdef CONFIG_PM /* avoid warnings about unused pdev */
-+	if (hcd->self.controller) {
-+		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- 
- 		/* RWC may not be set for add-in PCI cards, since boot
- 		 * firmware probably ignored them.  This transfers PCI
-@@ -101,16 +150,14 @@ ohci_pci_start (struct usb_hcd *hcd)
- 		if (device_may_wakeup(&pdev->dev))
- 			ohci->hc_control |= OHCI_CTRL_RWC;
- 	}
-+#endif /* CONFIG_PM */
- 
--	/* NOTE: there may have already been a first reset, to
--	 * keep bios/smm irqs from making trouble
--	 */
--	if ((ret = ohci_run (ohci)) < 0) {
-+	ret = ohci_run (ohci);
-+	if (ret < 0) {
- 		ohci_err (ohci, "can't start\n");
- 		ohci_stop (hcd);
--		return ret;
- 	}
--	return 0;
-+	return ret;
- }
- 
- #ifdef	CONFIG_PM
--- 
-1.4.4.2
-