rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

15 files changed, 0 insertions, 743 deletions

diff --git a/packages/ixp425-eth/ixp400-eth-1.5/2.6.14.patch b/packages/ixp425-eth/ixp400-eth-1.5/2.6.14.patch
deleted file mode 100644
index f3426e4287..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/2.6.14.patch
+++ /dev/null
@@ -1,35 +0,0 @@
- ixp400_eth.c |    8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -1838,7 +1838,11 @@ static inline void dev_eth_type_trans(un
-     skb->len -= header_len;
-    
-     /* fill the pkt arrival time (set at the irq callback entry) */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
-     skb->stamp = irq_stamp;
-+#else
-+    skb_set_timestamp(skb, &irq_stamp);
-+#endif
-  
-     /* fill the input device field */
-     skb->dev = dev;
-@@ -3014,7 +3018,7 @@ static int phy_init(void)
- }
- 
- /* set port MAC addr and update the dev struct if successfull */
--int dev_set_mac_address(struct net_device *dev, void *addr)
-+static int set_mac_address(struct net_device *dev, void *addr)
- {
-     int res;
-     IxEthAccMacAddr npeMacAddr;
-@@ -3266,7 +3270,7 @@ static int __devinit dev_eth_probe(struc
-     ndev->set_multicast_list = dev_set_multicast_list;
-     ndev->flags |= IFF_MULTICAST;
- 
--    ndev->set_mac_address = dev_set_mac_address;
-+    ndev->set_mac_address = set_mac_address;
- 
- #ifdef CONFIG_IXP400_NAPI
-     ndev->poll = &dev_rx_poll;
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/2.6.15.patch b/packages/ixp425-eth/ixp400-eth-1.5/2.6.15.patch
deleted file mode 100644
index 83115d8efa..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/2.6.15.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-2.6.15 needs platform_device.h
-
- ixp400_eth.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -65,6 +65,10 @@
- #include <linux/sysctl.h>
- #include <linux/unistd.h>
- 
-+#ifndef to_platform_device
-+#include <linux/platform_device.h>
-+#endif
-+
- /*
-  * Intel IXP400 Software specific header files
-  */
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/Makefile.patch b/packages/ixp425-eth/ixp400-eth-1.5/Makefile.patch
deleted file mode 100644
index 3bc51f0b66..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/Makefile.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-This is an OpenEmbedded only patch to make the code buildable in
-the OpenEmbedded environment.
-
---- ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,30 @@
-+obj-m := ixp400_eth.o
-+
-+CFLAGS_ixp400_eth.o = -DWall \
-+          -I$(IXP4XX_CSR_DIR) \
-+          -I$(OSAL_DIR)/ \
-+          -I$(OSAL_DIR)/os/linux/include/ \
-+          -I$(OSAL_DIR)/os/linux/include/modules/ \
-+          -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
-+          -I$(OSAL_DIR)/os/linux/include/modules/core/ \
-+          -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
-+          -I$(OSAL_DIR)/os/linux/include/core/  \
-+          -I$(OSAL_DIR)/os/linux/include/platforms/ \
-+          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
-+          -I$(OSAL_DIR)/os/linux/include/core/ \
-+          -I$(OSAL_DIR)/include/ \
-+          -I$(OSAL_DIR)/include/modules/ \
-+          -I$(OSAL_DIR)/include/modules/bufferMgt/ \
-+          -I$(OSAL_DIR)/include/modules/ioMem/ \
-+          -I$(OSAL_DIR)/include/modules/core/ \
-+          -I$(OSAL_DIR)/include/platforms/ \
-+          -I$(OSAL_DIR)/include/platforms/ixp400/ \
-+          -I$(OSAL_DIR)/include/platforms/ixp400/xp425/ \
-+          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425/ \
-+	  $(IX_CFLAGS)
-+
-+default:
-+	$(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) $(KERNEL_VERBOSE) symverfile=$(IXP4XX_CSR_SYMVERS) -C $(LINUX_SRC) SUBDIRS=$(PWD) modules
-+
-+clean:
-+	rm -f ixp400_eth.ko
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/continue-if-qmgr-init-fails.patch b/packages/ixp425-eth/ixp400-eth-1.5/continue-if-qmgr-init-fails.patch
deleted file mode 100644
index 8508790fa5..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/continue-if-qmgr-init-fails.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-tries to go on even if queue manager initialization
-fails. this is hand because you'll be allowed to
-insert ixp400_eth immediately after you have removed
-it, without re-inserting ixp400.
-
- ixp400_eth.c |    5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -2850,10 +2850,7 @@ static int qmgr_init(void)
-     /* Initialise Queue Manager */
-     P_VERBOSE("Initialising Queue Manager...\n");
-     if ((res = ixQMgrInit()))
--    {
--	P_ERROR("Error initialising queue manager!\n");
--	return -1;
--    }
-+	P_ERROR("Error initialising queue manager, trying to continue!\n");
- 
-     TRACE;
- 
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/debug.patch b/packages/ixp425-eth/ixp400-eth-1.5/debug.patch
deleted file mode 100644
index c684c078d2..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/debug.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-This patch is not necessary but helps when debugging the build
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -1350,9 +1350,10 @@ static int dev_media_check_thread (void*
- 	
- 	    if (res != IX_ETH_ACC_SUCCESS)
- 	    {
--		P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
-+		P_WARN("%s: ixEthMiiLinkStatus failed on PHY%d.\n"
- 		       "\tCan't determine\nthe auto negotiated parameters. "
- 		       "Using default values.\n",
-+		       dev->name,
- 		       phyNum); 
- 		/* something is bad, gracefully stops the loop */
- 		priv->maintenanceCheckStopped = TRUE;
-@@ -2213,7 +2214,8 @@ static int port_enable(struct net_device
- 	   IX_IEEE803_MAC_ADDRESS_SIZE);
-     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
-     {
--        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
-+        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
-+	       dev->name,
- 	       (unsigned)npeMacAddr.macAddress[0],
- 	       (unsigned)npeMacAddr.macAddress[1],
- 	       (unsigned)npeMacAddr.macAddress[2],
-@@ -2707,8 +2709,8 @@ static int do_dev_ioctl(struct net_devic
- 	    down (miiAccessMutex);     /* lock the MII register access mutex */
- 	    if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out)))
- 	    {
--		P_ERROR("Error reading MII reg %d on phy %d\n",
--		       data->reg_num, data->phy_id);
-+		P_ERROR("%s: Error reading MII reg %d on phy %d\n",
-+		       dev->name, data->reg_num, data->phy_id);
- 		res = -1;
- 	    }
- 	    up (miiAccessMutex);	/* release the MII register access mutex */
-@@ -2720,8 +2722,8 @@ static int do_dev_ioctl(struct net_devic
- 	    down (miiAccessMutex);     /* lock the MII register access mutex */
- 	    if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in)))
- 	    {
--		P_ERROR("Error writing MII reg %d on phy %d\n",
--                        data->reg_num, data->phy_id);
-+		P_ERROR("%s: Error writing MII reg %d on phy %d\n",
-+                        dev->name, data->reg_num, data->phy_id);
- 		res = -1;
- 	    }
- 	    up (miiAccessMutex);	/* release the MII register access mutex */
-@@ -3049,7 +3051,8 @@ static int set_mac_address(struct net_de
-     /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */
-     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
-     {
--        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
-+        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
-+	       dev->name,
- 	       (unsigned)npeMacAddr.macAddress[0],
- 	       (unsigned)npeMacAddr.macAddress[1],
- 	       (unsigned)npeMacAddr.macAddress[2],
-@@ -3267,6 +3270,8 @@ static int __devinit dev_eth_probe(struc
- 	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
-     if (!priv->maintenanceCheckThreadComplete)
-     {
-+	P_ERROR("%s: Failed to allocate maintenance semaphore %d\n",
-+		ndev->name, priv->port_id);
- 	goto error;
-     }
-     priv->lock = SPIN_LOCK_UNLOCKED;
-@@ -3360,7 +3365,11 @@ static int __devinit dev_eth_probe(struc
- 
- #if IS_KERNEL26
-     if (register_netdev(ndev))
-+    {
-+	P_ERROR("%s: Failed to register netdevice %d\n",
-+		ndev->name, priv->port_id);
-     	goto error;
-+    }
- #else
-     found_devices++;
- #endif /* IS_KERNEL26 */
-@@ -3370,6 +3379,8 @@ static int __devinit dev_eth_probe(struc
-     /* register EthAcc callbacks for this port */
-     if (dev_rxtxcallback_register(portId, (UINT32)ndev))
-     {
-+    	P_ERROR("%s: Failed to register callback %d\n",
-+		ndev->name, priv->port_id);
-     	goto error;
-     }
- 
-@@ -3393,6 +3404,7 @@ static int __devinit dev_eth_probe(struc
- 
- /* Error handling: enter here whenever error detected */
- error:
-+    P_ERROR("%s: dev_eth_probe fails\n", ndev->name);
-     TRACE;
- 
- #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED
-@@ -3465,21 +3477,21 @@ static int __devexit dev_eth_remove(int 
- 	{
- 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEA))
- 	    {
--		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
-+		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
- 	    }
- 	}
- 	if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
- 	{
- 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
- 	    {
--		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
-+		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
- 	    }
- 	}
- 	if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
- 	{
- 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
- 	    {
--		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
-+		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
- 	    }
- 	}
- 
-@@ -3528,6 +3540,9 @@ static int __init ixp400_eth_init(void)
-     TRACE;
- 
-     P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n");
-+#ifdef IX_OSAL_ENSURE_ON
-+    ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL);
-+#endif
- 
-     TRACE;
- 
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/device-name.patch b/packages/ixp425-eth/ixp400-eth-1.5/device-name.patch
deleted file mode 100644
index d8bbc97b8c..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/device-name.patch
+++ /dev/null
@@ -1,47 +0,0 @@
- register the ethernet devices as ethX
-
- ixp400_eth.c |   41 +++++++++++++++++++----------------------
- 1 file changed, 19 insertions(+), 22 deletions(-)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -160,9 +160,6 @@ MODULE_PARM_DESC(phy_reset, "If non-zero
- MODULE_PARM(dev_max_count, "i");
- MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
- 
--/* devices will be called ixp0 and ixp1 */
--#define DEVICE_NAME "ixp"
--
- /* boolean values for PHY link speed, duplex, and autonegotiation */
- #define PHY_SPEED_10    0
- #define PHY_SPEED_100   1
-@@ -1570,7 +1568,7 @@ static int dev_pmu_timer_setup(void)
-     if (request_irq(IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL,
-                     dev_pmu_timer_os_isr,
-                     SA_SHIRQ,
--                    DEVICE_NAME,
-+                    MODULE_NAME,
-                     (void *)IRQ_ANY_PARAMETER))
-     {
-         P_ERROR("Failed to reassign irq to PMU timer interrupt!\n");
-@@ -3009,8 +3008,8 @@ static int phy_init(void)
- 	if (port_id == IX_ETH_PORT_2) npe_id = "C";
- 	if (port_id == IX_ETH_PORT_3) npe_id = "A";
- 
--	P_INFO("%s%d is using NPE%s and the PHY at address %d\n",
--	       DEVICE_NAME, dev_count, npe_id, phyAddresses[port_id]);
-+	P_INFO("ethernet %d using NPE%s and the PHY at address %d\n",
-+	       dev_count, npe_id, phyAddresses[port_id]);
- 
- 	/* Set the MAC to the same duplex mode as the phy */
- 	ixEthAccPortDuplexModeSet(port_id,
-@@ -3215,9 +3215,6 @@ static int __devinit dev_eth_probe(struc
-     /* set the private port ID */
-     priv->port_id  = portId;
- 
--    /* set device name */
--    sprintf(ndev->name, DEVICE_NAME"%d", priv->port_id);
--
-     TRACE;
- 
-     /* initialize RX pool */
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/int-random.patch b/packages/ixp425-eth/ixp400-eth-1.5/int-random.patch
deleted file mode 100644
index fede9daf90..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/int-random.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-use the ethernet device interrupts to gather entropy
-
- ixp400_eth.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -2864,7 +2864,7 @@ static int qmgr_init(void)
- 
-     if (request_irq(IX_OSAL_IXP400_QM1_IRQ_LVL,
-                     dev_qmgr_os_isr,
--                    SA_SHIRQ,
-+                    SA_SHIRQ | SA_SAMPLE_RANDOM,
-                     MODULE_NAME,
-                     (void *)IRQ_ANY_PARAMETER))
-     {
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/le.patch b/packages/ixp425-eth/ixp400-eth-1.5/le.patch
deleted file mode 100644
index 3d569015e6..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/le.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-little endian support
-
- ixp400_eth.c |   20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -2040,6 +2040,16 @@ static void rx_cb(UINT32 callbackTag, IX
- 	skb->tail = skb->data + len;
- 	skb->len = len;
- 	
-+#ifndef __ARMEB__
-+	{
-+	    /* Byte swap all words containing data from the buffer. */
-+	    unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
-+	    unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
-+	    while (p < e)
-+		*p = ntohl(*p), ++p;
-+	}
-+#endif
-+
- #ifdef DEBUG_DUMP
- 	skb_dump("rx", skb);
- #endif
-@@ -2431,6 +2441,16 @@ static int dev_hard_start_xmit(struct sk
- 	return 0;
-     }
- 
-+#ifndef __ARMEB__
-+    {
-+	/* Byte swap all words containing data from the buffer. */
-+	unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
-+	unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
-+	while (p < e)
-+	    *p = ntohl(*p), ++p;
-+    }
-+#endif
-+
- #ifdef DEBUG_DUMP
-     skb_dump("tx", skb);
- #endif
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch b/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch
deleted file mode 100644
index e23eaf5f2b..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-Patch to use maclist - get the MAC to use from the board level
-MAC repository based on the device portId.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -23,10 +23,10 @@
-  * This driver is written and optimized for Intel Xscale technology.
-  *
-  * SETUP NOTES:
-- * By default, this driver uses predefined MAC addresses.
-- * These are set in global var 'default_mac_addr' in this file.
-- * If required, these can be changed at run-time using
-- * the 'ifconfig' tool.
-+ * By default, this driver uses MAC addresses from maclist, if
-+ * these are not available the kernel api to randomly generate
-+ * a locally assigned MAC address is used.  The MAC can be
-+ * overridden with ifconfig if absolutely necessary.
-  *
-  * Example - to set ixp0 MAC address to 00:02:B3:66:88:AA, 
-  * run ifconfig with the following arguments:
-@@ -64,6 +64,7 @@
- #include <linux/sysctl.h>
- #include <linux/unistd.h>
- #include <linux/version.h>
-+#include <net/maclist.h>
- 
- #if KERNEL_VERSION(2,6,0) <= LINUX_VERSION_CODE
- #include <linux/workqueue.h>
-@@ -130,6 +131,8 @@ static int dev_max_count = 1; /* only NP
- static int dev_max_count = 2; /* only NPEB and NPEC */
- #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
- static int dev_max_count = 3; /* all NPEs are used */
-+#else
-+static int dev_max_count = -1;/* use maclist_count */
- #endif
- 
- #ifndef CONFIG_IXP400_NAPI
-@@ -614,21 +617,6 @@ static phy_cfg_t default_phy_cfg[] =
- #endif
- };
- 
--/* Default MAC addresses for EthAcc Ports 1 and 2 (using Intel MAC prefix) 
-- * Default is 
-- *   IX_ETH_PORT_1 -> MAC 00:02:b3:01:01:01
-- *   IX_ETH_PORT_2 -> MAC 00:02:b3:02:02:02
-- *   IX_ETH_PORT_3 -> MAC 00:02:b3:03:03:03
--*/
--static IxEthAccMacAddr default_mac_addr[] =
--{
--    {{0x00, 0x02, 0xB3, 0x01, 0x01, 0x01}}  /* EthAcc Port 0 */
--    ,{{0x00, 0x02, 0xB3, 0x02, 0x02, 0x02}} /* EthAcc Port 1 */
--#if defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
--    ,{{0x00, 0x02, 0xB3, 0x03, 0x03, 0x03}} /* EthAcc Port 2 */
--#endif
--};
--
- /* Default mapping of  NpeImageIds for EthAcc Ports 
-  * Default is 
-  *   IX_ETH_PORT_1 -> IX_ETH_NPE_B
-@@ -3325,28 +3313,10 @@ static int __devinit dev_eth_probe(struc
- 
-     /* Defines the unicast MAC address
-      *
--     * Here is a good place to read a board-specific MAC address
--     * from a non-volatile memory, e.g. an external eeprom.
--     * 
--     * This memcpy uses a default MAC address from this
--     * source code.
--     *
--     * This can be overriden later by the (optional) command
--     *
--     *     ifconfig ixp0 ether 0002b3010101
--     *
-+     * The code reads from the maclist API.
-      */
--
--    memcpy(ndev->dev_addr, 
--	   &default_mac_addr[priv->port_id].macAddress,
--	   IX_IEEE803_MAC_ADDRESS_SIZE);
--
--    /* possibly remove this test and the message when a valid MAC address 
--     * is not hardcoded in the driver source code. 
--     */
--    if (is_valid_ether_addr(ndev->dev_addr))
--    {
--	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
-+    maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id);
-+    P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
- 	       (unsigned)ndev->dev_addr[0],
- 	       (unsigned)ndev->dev_addr[1],
- 	       (unsigned)ndev->dev_addr[2],
-@@ -3354,7 +3324,6 @@ static int __devinit dev_eth_probe(struc
- 	       (unsigned)ndev->dev_addr[4],
- 	       (unsigned)ndev->dev_addr[5],
- 	       priv->port_id);
--    }
-     
-     /* Set/update the internal packet size 
-      * This can be overriden later by the command
-@@ -3562,12 +3531,15 @@ static int __init ixp400_eth_init(void)
- 
-     TRACE;
- 
--    /* check module parameter range */
--    if (dev_max_count == 0 || dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
--    {
--	P_ERROR("Number of ports supported is dev_max_count <= %d\n", IX_ETH_ACC_NUMBER_OF_PORTS);
--	return -1;
--    }
-+    /* fix dev_max_count to maclist_count - the actual number of
-+     * available MACs
-+     */
-+    if (dev_max_count <= 0 || (dev_max_count > maclist_count() && maclist_count() > 0))
-+	    dev_max_count = maclist_count();
-+    if (dev_max_count <= 0)
-+	    dev_max_count = 1;
-+    else if (dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
-+	    dev_max_count = IX_ETH_ACC_NUMBER_OF_PORTS;
- 
-     TRACE;
- 
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/modprobe.conf b/packages/ixp425-eth/ixp400-eth-1.5/modprobe.conf
deleted file mode 100644
index f08b9a404c..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/modprobe.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-# Add an alias for eth0 to ixp400_eth to cause the S40networking
-# init script to load the ixp400_eth driver on the first boot
-alias eth0 ixp400_eth
-options ixp400_eth dev_max_count=1
\ No newline at end of file
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/module-param.patch b/packages/ixp425-eth/ixp400-eth-1.5/module-param.patch
deleted file mode 100644
index c54c45d716..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/module-param.patch
+++ /dev/null
@@ -1,62 +0,0 @@
- ixp400_eth.c |   32 ++++++++++++++++++++++++++++++++
- 1 files changed, 32 insertions(+)
-
-Index: ixp400_eth/ixp400_eth.c
-===================================================================
---- ixp400_eth.orig/ixp400_eth.c
-+++ ixp400_eth/ixp400_eth.c
-@@ -142,22 +142,54 @@
- 
- static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
- 
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(ixp400_netdev_max_backlog, "i");
-+#else
-+module_param(ixp400_netdev_max_backlog, int, 0644);
-+#endif
- MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(datapath_poll, "i");
-+#else
-+module_param(datapath_poll, int, 0644);
-+#endif
- MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
- #endif /* CONFIG_IXP400_NAPI */
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(npe_learning, "i");
-+#else
-+module_param(npe_learning, int, 0644);
-+#endif
- MODULE_PARM_DESC(npe_learning, "If non-zero, NPE MAC Address Learning & Filtering feature will be enabled");
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(log_level, "i");
-+#else
-+module_param(log_level, int, 0644);
-+#endif
- MODULE_PARM_DESC(log_level, "Set log level: 0 - None, 1 - Verbose, 2 - Debug");
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(no_ixp400_sw_init, "i");
-+#else
-+module_param(no_ixp400_sw_init, int, 0644);
-+#endif
- MODULE_PARM_DESC(no_ixp400_sw_init, "If non-zero, do not initialise Intel IXP400 Software Release core components");
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(no_phy_scan, "i");
-+#else
-+module_param(no_phy_scan, int, 0644);
-+#endif
- MODULE_PARM_DESC(no_phy_scan, "If non-zero, use hard-coded phy addresses");
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(phy_reset, "i");
-+#else
-+module_param(phy_reset, int, 0644);
-+#endif
- MODULE_PARM_DESC(phy_reset, "If non-zero, reset the phys");
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
- MODULE_PARM(dev_max_count, "i");
-+#else
-+module_param(dev_max_count, int, 0644);
-+#endif
- MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
- 
- /* boolean values for PHY link speed, duplex, and autonegotiation */
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/netdev_max_backlog.patch b/packages/ixp425-eth/ixp400-eth-1.5/netdev_max_backlog.patch
deleted file mode 100644
index 6891b6b4a9..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/netdev_max_backlog.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- ixp400_eth/ixp400_eth.c~	2006-01-09 01:03:11.000000000 +1030
-+++ ixp400_eth/ixp400_eth.c	2006-01-09 01:05:27.000000000 +1030
-@@ -139,12 +139,12 @@
-  * skbuf to push into the linux stack, and avoid the performance degradations 
-  * during overflow.
-  */
--static int netdev_max_backlog = 290;
-+static int ixp400_netdev_max_backlog = 290;
- 
- static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
- 
--MODULE_PARM(netdev_max_backlog, "i");
--MODULE_PARM_DESC(netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
-+MODULE_PARM(ixp400_netdev_max_backlog, "i");
-+MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
- MODULE_PARM(datapath_poll, "i");
- MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
- #endif /* CONFIG_IXP400_NAPI */
-@@ -213,7 +213,7 @@
-  * high traffic rates. To measure the maximum throughput between the
-  * ports of the driver,
-  * - Modify /proc/sys/net/core/netdev_max_backlog value in the kernel 
-- * - Adjust netdev_max_backlog=n in the driver's command line
-+ * - Adjust ixp400_netdev_max_backlog=n in the driver's command line
-  * in order to get the best rates depending on the testing tool 
-  * and the OS load.
-  *
-@@ -1997,7 +1997,7 @@
-     /* check if the system accepts more traffic and
-      * against chained mbufs 
-      */
--    if ((qlevel < netdev_max_backlog)
-+    if ((qlevel < ixp400_netdev_max_backlog)
-         && (IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(mbuf) == NULL))
- #else
-     /* check against chained mbufs
-@@ -3776,13 +3776,13 @@
- #ifndef CONFIG_IXP400_NAPI
-     /* set the softirq rx queue thresholds 
-      * (These numbers are based on tuning experiments)
--     * maxbacklog =  (netdev_max_backlog * 10) / 63;
-+     * maxbacklog =  (ixp400_netdev_max_backlog * 10) / 63;
-     */
--    if (netdev_max_backlog == 0)
-+    if (ixp400_netdev_max_backlog == 0)
-     {
--	netdev_max_backlog = 290; /* system default */
-+	ixp400_netdev_max_backlog = 290; /* system default */
-     }
--    netdev_max_backlog /= BACKLOG_TUNE;
-+    ixp400_netdev_max_backlog /= BACKLOG_TUNE;
- 
-     TRACE;
- #endif
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/params.patch b/packages/ixp425-eth/ixp400-eth-1.5/params.patch
deleted file mode 100644
index 86011deaaa..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/params.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-*** ixp/ixp400_eth.c.orig	Wed Jun  7 21:31:59 2006
---- ixp/ixp400_eth.c	Fri Jun  9 14:55:18 2006
-***************
-*** 112,135 ****
-  #define MOD_VERSION "1.5"
-  
-  /* Module parameters */
-! static int npe_learning = 1;      /* default : NPE learning & filtering enable */
-! static int log_level = 0;         /* default : no log */
-! static int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
-! static int no_phy_scan = 0;       /* default : do phy discovery */
-! static int phy_reset = 0;         /* default : mo phy reset */
-  
-  /* maximum number of ports supported by this driver ixp0, ixp1 ....
-   * The default is to configure all ports defined in EthAcc component
-  */
-  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
-! static int dev_max_count = 1; /* only NPEC is used */
-! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
-! static int dev_max_count = 1; /* only NPEB is used */
-  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
-        || defined (CONFIG_ARCH_ADI_COYOTE)
-! static int dev_max_count = 2; /* only NPEB and NPEC */
-  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
-! static int dev_max_count = 3; /* all NPEs are used */
-  #endif
-  
-  #ifndef CONFIG_IXP400_NAPI
---- 112,136 ----
-  #define MOD_VERSION "1.5"
-  
-  /* Module parameters */
-! /* gcc 4.1.1+kernel2.6.16 do not like it if these are static! */
-! int npe_learning = 1;      /* default : NPE learning & filtering enable */
-! int log_level = 0;         /* default : no log */
-! int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
-! int no_phy_scan = 0;       /* default : do phy discovery */
-! int phy_reset = 0;         /* default : mo phy reset */
-  
-  /* maximum number of ports supported by this driver ixp0, ixp1 ....
-   * The default is to configure all ports defined in EthAcc component
-  */
-  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
-! int dev_max_count = 1; /* only NPEC is used */
-! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
-! int dev_max_count = 1; /* only NPEB is used */
-  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
-        || defined (CONFIG_ARCH_ADI_COYOTE)
-! int dev_max_count = 2; /* only NPEB and NPEC */
-  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
-! int dev_max_count = 3; /* all NPEs are used */
-  #endif
-  
-  #ifndef CONFIG_IXP400_NAPI
-***************
-*** 138,146 ****
-   * skbuf to push into the linux stack, and avoid the performance degradations 
-   * during overflow.
-   */
-! static int ixp400_netdev_max_backlog = 290;
-  
-! static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
-  
-  MODULE_PARM(ixp400_netdev_max_backlog, "i");
-  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
---- 139,147 ----
-   * skbuf to push into the linux stack, and avoid the performance degradations 
-   * during overflow.
-   */
-! int ixp400_netdev_max_backlog = 290;
-  
-! int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
-  
-  MODULE_PARM(ixp400_netdev_max_backlog, "i");
-  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/poll-controller.patch b/packages/ixp425-eth/ixp400-eth-1.5/poll-controller.patch
deleted file mode 100644
index 64fb310ee5..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/poll-controller.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-poll controller support
-
- ixp400_eth.c |   22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -348,6 +348,12 @@ static int dev_pmu_timer_init(void);
- extern void 
- ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
- 
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+/* poll controller (needed for netconsole et al) */
-+static void
-+ixp425eth_poll_controller(struct net_device *dev);
-+#endif
-+
- /* Private device data */
- typedef struct {
-     spinlock_t lock;  /* multicast management lock */
-@@ -3060,6 +3066,19 @@ static int set_mac_address(struct net_de
-     return 0;
- }
- 
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+/*
-+ * Polling receive - used by netconsole and other diagnostic tools
-+ * to allow network i/o with interrupts disabled.
-+ * (stolen from 8139too.c by siddy)
-+ */
-+static void ixp425eth_poll_controller(struct net_device *dev)
-+{
-+        disable_irq(dev->irq);
-+        dev_qmgr_os_isr(dev->irq, dev, NULL);
-+        enable_irq(dev->irq);
-+}
-+#endif
- 
- /* 
-  *  TX QDISC
-@@ -3270,6 +3289,9 @@ static int __devinit dev_eth_probe(struc
-     ndev->get_stats = dev_get_stats;
-     ndev->set_multicast_list = dev_set_multicast_list;
-     ndev->flags |= IFF_MULTICAST;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+    ndev->poll_controller = ixp425eth_poll_controller;
-+#endif
- 
-     ndev->set_mac_address = set_mac_address;
- 
diff --git a/packages/ixp425-eth/ixp400-eth-1.5/stop-on-rmmod.patch b/packages/ixp425-eth/ixp400-eth-1.5/stop-on-rmmod.patch
deleted file mode 100644
index 2ddc98938a..0000000000
--- a/packages/ixp425-eth/ixp400-eth-1.5/stop-on-rmmod.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-devices must be explicitely stopped when
-the driver is going do be removed, otherwise
-it will simply hang.
-
- ixp400_eth.c |   13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-+++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
-@@ -3800,9 +3800,16 @@ void __exit ixp400_eth_exit(void)
- 
-     TRACE;
- 
--    /* We can only get here when the module use count is 0,
--     * so there's no need to stop devices.
--     */
-+    /* stop devices */
-+
-+#if IS_KERNEL26
-+    for (dev_count = 0;
-+	 dev_count < dev_max_count;  /* module parameter */
-+	 dev_count++)
-+    {
-+	do_dev_stop(platform_get_drvdata(&ixp400_eth_devices[dev_count]));
-+    }
-+#endif
- 
-     if (no_ixp400_sw_init == 0) /* module parameter */
-     {