rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 256 deletions

diff --git a/packages/gcc/gcc-3.4.4/gcc-3.4.0-arm-softfloat.patch b/packages/gcc/gcc-3.4.4/gcc-3.4.0-arm-softfloat.patch
deleted file mode 100644
index f53d64b374..0000000000
--- a/packages/gcc/gcc-3.4.4/gcc-3.4.0-arm-softfloat.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-#
-# Submitted:
-#
-# Dimitry Andric <dimitry@andric.com>, 2004-05-01
-#
-# Description:
-#
-# Nicholas Pitre released this patch for gcc soft-float support here: 
-# http://lists.arm.linux.org.uk/pipermail/linux-arm/2003-October/006436.html
-#
-# This version has been adapted to work with gcc 3.4.0.
-#
-# The original patch doesn't distinguish between softfpa and softvfp modes
-# in the way Nicholas Pitre probably meant.  His description is:
-#
-# "Default is to use APCS-32 mode with soft-vfp.  The old Linux default for
-# floats can be achieved with -mhard-float or with the configure
-# --with-float=hard option.  If -msoft-float or --with-float=soft is used then
-# software float support will be used just like the default but with the legacy
-# big endian word ordering for double float representation instead."
-#
-# Which means the following:
-#
-# * If you compile without -mhard-float or -msoft-float, you should get
-#   software floating point, using the VFP format.  The produced object file
-#   should have these flags in its header:
-#
-#     private flags = 600: [APCS-32] [VFP float format] [software FP]
-#
-# * If you compile with -mhard-float, you should get hardware floating point,
-#   which always uses the FPA format.  Object file header flags should be:
-#
-#     private flags = 0: [APCS-32] [FPA float format]
-#
-# * If you compile with -msoft-float, you should get software floating point,
-#   using the FPA format.  This is done for compatibility reasons with many
-#   existing distributions.  Object file header flags should be:
-#
-#     private flags = 200: [APCS-32] [FPA float format] [software FP]
-#
-# The original patch from Nicholas Pitre contained the following constructs:
-#
-#   #define SUBTARGET_EXTRA_ASM_SPEC "%{!mcpu=*:-mcpu=xscale} \
-#     %{mhard-float:-mfpu=fpa} \
-#     %{!mhard-float: %{msoft-float:-mfpu=softfpa;:-mfpu=softvfp}}"
-#
-# However, gcc doesn't accept this ";:" notation, used in the 3rd line.  This
-# is probably the reason Robert Schwebel modified it to:
-#
-#   #define SUBTARGET_EXTRA_ASM_SPEC "%{!mcpu=*:-mcpu=xscale} \
-#     %{mhard-float:-mfpu=fpa} \
-#     %{!mhard-float: %{msoft-float:-mfpu=softfpa -mfpu=softvfp}}"
-#
-# But this causes the following behaviour:
-#
-# * If you compile without -mhard-float or -msoft-float, the compiler generates
-#   software floating point instructions, but *nothing* is passed to the
-#   assembler, which results in an object file which has flags:
-#
-#     private flags = 0: [APCS-32] [FPA float format]
-#
-#   This is not correct!
-#
-# * If you compile with -mhard-float, the compiler generates hardware floating
-#   point instructions, and passes "-mfpu=fpa" to the assembler, which results
-#   in an object file which has the same flags as in the previous item, but now
-#   those *are* correct.
-#    
-# * If you compile with -msoft-float, the compiler generates software floating
-#   point instructions, and passes "-mfpu=softfpa -mfpu=softvfp" (in that
-#   order) to the assembler, which results in an object file with flags:
-#
-#   private flags = 600: [APCS-32] [VFP float format] [software FP]
-#
-#   This is not correct, because the last "-mfpu=" option on the assembler
-#   command line determines the actual FPU convention used (which should be FPA
-#   in this case).
-#
-# Therefore, I modified this patch to get the desired behaviour.  Every
-# instance of the notation:
-#
-#   %{msoft-float:-mfpu=softfpa -mfpu=softvfp}
-#
-# was changed to:
-#
-#   %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}
-#
-# I also did the following:
-# 
-# * Modified all TARGET_DEFAULT macros I could find to include ARM_FLAG_VFP, to
-#   be consistent with Nicholas' original patch.
-# * Removed any "msoft-float" or "mhard-float" from all MULTILIB_DEFAULTS
-#   macros I could find.  I think that if you compile without any options, you
-#   would like to get the defaults. :)
-# * Removed the extra -lfloat option from LIBGCC_SPEC, since it isn't needed
-#   anymore.  (The required functions are now in libgcc.)
-
-diff -urNd gcc-3.4.0-orig/gcc/config/arm/coff.h gcc-3.4.0/gcc/config/arm/coff.h
---- gcc-3.4.0-orig/gcc/config/arm/coff.h	2004-02-24 15:25:22.000000000 +0100
-+++ gcc-3.4.0/gcc/config/arm/coff.h	2004-05-01 19:07:06.059409600 +0200
-@@ -31,11 +31,16 @@
- #define TARGET_VERSION fputs (" (ARM/coff)", stderr)
- 
- #undef  TARGET_DEFAULT
--#define TARGET_DEFAULT (ARM_FLAG_SOFT_FLOAT | ARM_FLAG_APCS_32 | ARM_FLAG_APCS_FRAME | ARM_FLAG_MMU_TRAPS)
-+#define TARGET_DEFAULT		\
-+	( ARM_FLAG_SOFT_FLOAT	\
-+	| ARM_FLAG_VFP		\
-+	| ARM_FLAG_APCS_32	\
-+	| ARM_FLAG_APCS_FRAME	\
-+	| ARM_FLAG_MMU_TRAPS )
- 
- #ifndef MULTILIB_DEFAULTS
- #define MULTILIB_DEFAULTS \
--  { "marm", "mlittle-endian", "msoft-float", "mapcs-32", "mno-thumb-interwork" }
-+  { "marm", "mlittle-endian", "mapcs-32", "mno-thumb-interwork" }
- #endif
- 
- /* This is COFF, but prefer stabs.  */
-diff -urNd gcc-3.4.0-orig/gcc/config/arm/elf.h gcc-3.4.0/gcc/config/arm/elf.h
---- gcc-3.4.0-orig/gcc/config/arm/elf.h	2004-02-24 15:25:22.000000000 +0100
-+++ gcc-3.4.0/gcc/config/arm/elf.h	2004-05-01 19:12:16.976486400 +0200
-@@ -46,7 +46,9 @@
- 
- #ifndef SUBTARGET_ASM_FLOAT_SPEC
- #define SUBTARGET_ASM_FLOAT_SPEC "\
--%{mapcs-float:-mfloat} %{msoft-float:-mfpu=softfpa}"
-+%{mapcs-float:-mfloat} \
-+%{mhard-float:-mfpu=fpa} \
-+%{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
- #endif
- 
- #ifndef ASM_SPEC
-@@ -106,12 +108,17 @@
- #endif
- 
- #ifndef TARGET_DEFAULT
--#define TARGET_DEFAULT (ARM_FLAG_SOFT_FLOAT | ARM_FLAG_APCS_32 | ARM_FLAG_APCS_FRAME | ARM_FLAG_MMU_TRAPS)
-+#define TARGET_DEFAULT		\
-+	( ARM_FLAG_SOFT_FLOAT	\
-+	| ARM_FLAG_VFP		\
-+	| ARM_FLAG_APCS_32	\
-+	| ARM_FLAG_APCS_FRAME	\
-+	| ARM_FLAG_MMU_TRAPS )
- #endif
- 
- #ifndef MULTILIB_DEFAULTS
- #define MULTILIB_DEFAULTS \
--  { "marm", "mlittle-endian", "msoft-float", "mapcs-32", "mno-thumb-interwork", "fno-leading-underscore" }
-+  { "marm", "mlittle-endian", "mapcs-32", "mno-thumb-interwork", "fno-leading-underscore" }
- #endif
- 
- #define TARGET_ASM_FILE_START_APP_OFF true
-diff -urNd gcc-3.4.0-orig/gcc/config/arm/linux-elf.h gcc-3.4.0/gcc/config/arm/linux-elf.h
---- gcc-3.4.0-orig/gcc/config/arm/linux-elf.h	2004-01-31 07:18:11.000000000 +0100
-+++ gcc-3.4.0/gcc/config/arm/linux-elf.h	2004-05-01 19:19:06.935979200 +0200
-@@ -30,9 +30,27 @@
- /* Do not assume anything about header files.  */
- #define NO_IMPLICIT_EXTERN_C
- 
--/* Default is to use APCS-32 mode.  */
-+/*
-+ * Default is to use APCS-32 mode with soft-vfp.
-+ * The old Linux default for floats can be achieved with -mhard-float
-+ * or with the configure --with-float=hard option.
-+ * If -msoft-float or --with-float=soft is used then software float 
-+ * support will be used just like the default but with the legacy
-+ * big endian word ordering for double float representation instead.
-+ */
-+
- #undef  TARGET_DEFAULT
--#define TARGET_DEFAULT (ARM_FLAG_APCS_32 | ARM_FLAG_MMU_TRAPS)
-+#define TARGET_DEFAULT		\
-+	( ARM_FLAG_APCS_32	\
-+	| ARM_FLAG_SOFT_FLOAT	\
-+	| ARM_FLAG_VFP		\
-+	| ARM_FLAG_MMU_TRAPS )
-+
-+#undef  SUBTARGET_EXTRA_ASM_SPEC
-+#define SUBTARGET_EXTRA_ASM_SPEC "\
-+%{!mcpu=*:-mcpu=xscale} \
-+%{mhard-float:-mfpu=fpa} \
-+%{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
- 
- #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6
- 
-@@ -40,7 +58,7 @@
- 
- #undef  MULTILIB_DEFAULTS
- #define MULTILIB_DEFAULTS \
--	{ "marm", "mlittle-endian", "mhard-float", "mapcs-32", "mno-thumb-interwork" }
-+	{ "marm", "mlittle-endian", "mapcs-32", "mno-thumb-interwork" }
- 
- #define CPP_APCS_PC_DEFAULT_SPEC "-D__APCS_32__"
- 
-@@ -55,7 +73,7 @@
-    %{shared:-lc} \
-    %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
- 
--#define LIBGCC_SPEC "%{msoft-float:-lfloat} -lgcc"
-+#define LIBGCC_SPEC "-lgcc"
- 
- /* Provide a STARTFILE_SPEC appropriate for GNU/Linux.  Here we add
-    the GNU/Linux magical crtbegin.o file (see crtstuff.c) which
-diff -urNd gcc-3.4.0-orig/gcc/config/arm/t-linux gcc-3.4.0/gcc/config/arm/t-linux
---- gcc-3.4.0-orig/gcc/config/arm/t-linux	2003-09-20 23:09:07.000000000 +0200
-+++ gcc-3.4.0/gcc/config/arm/t-linux	2004-05-01 20:31:59.102846400 +0200
-@@ -4,7 +4,10 @@
- LIBGCC2_DEBUG_CFLAGS = -g0
- 
- LIB1ASMSRC = arm/lib1funcs.asm
--LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx
-+LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \
-+	_negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \
-+	_truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \
-+	_fixsfsi _fixunssfsi
- 
- # MULTILIB_OPTIONS = mhard-float/msoft-float
- # MULTILIB_DIRNAMES = hard-float soft-float
-diff -urNd gcc-3.4.0-orig/gcc/config/arm/unknown-elf.h gcc-3.4.0/gcc/config/arm/unknown-elf.h
---- gcc-3.4.0-orig/gcc/config/arm/unknown-elf.h	2004-02-24 15:25:22.000000000 +0100
-+++ gcc-3.4.0/gcc/config/arm/unknown-elf.h	2004-05-01 19:09:09.016212800 +0200
-@@ -30,7 +30,12 @@
- 
- /* Default to using APCS-32 and software floating point.  */
- #ifndef TARGET_DEFAULT
--#define TARGET_DEFAULT	(ARM_FLAG_SOFT_FLOAT | ARM_FLAG_APCS_32 | ARM_FLAG_APCS_FRAME | ARM_FLAG_MMU_TRAPS)
-+#define TARGET_DEFAULT		\
-+	( ARM_FLAG_SOFT_FLOAT	\
-+	| ARM_FLAG_VFP		\
-+	| ARM_FLAG_APCS_32	\
-+	| ARM_FLAG_APCS_FRAME	\
-+	| ARM_FLAG_MMU_TRAPS )
- #endif
- 
- /* Now we define the strings used to build the spec file.  */
-diff -urNd gcc-3.4.0-orig/gcc/config/arm/xscale-elf.h gcc-3.4.0/gcc/config/arm/xscale-elf.h
---- gcc-3.4.0-orig/gcc/config/arm/xscale-elf.h	2003-07-02 01:26:43.000000000 +0200
-+++ gcc-3.4.0/gcc/config/arm/xscale-elf.h	2004-05-01 20:15:36.620105600 +0200
-@@ -49,11 +49,12 @@
- 		     endian, regardless of the endian-ness of the memory
- 		     system.  */
- 		     
--#define SUBTARGET_EXTRA_ASM_SPEC "%{!mcpu=*:-mcpu=xscale} \
--  %{mhard-float:-mfpu=fpa} \
--  %{!mhard-float: %{msoft-float:-mfpu=softfpa;:-mfpu=softvfp}}"
-+#define SUBTARGET_EXTRA_ASM_SPEC "\
-+%{!mcpu=*:-mcpu=xscale} \
-+%{mhard-float:-mfpu=fpa} \
-+%{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
- 
- #ifndef MULTILIB_DEFAULTS
- #define MULTILIB_DEFAULTS \
--  { "mlittle-endian", "mno-thumb-interwork", "marm", "msoft-float" }
-+  { "mlittle-endian", "mno-thumb-interwork", "marm" }
- #endif