rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 793 deletions

diff --git a/packages/foonas-init/files/sysconf b/packages/foonas-init/files/sysconf
deleted file mode 100644
index 8866c076b8..0000000000
--- a/packages/foonas-init/files/sysconf
+++ /dev/null
@@ -1,793 +0,0 @@
-#!/bin/sh
-# sysconf
-#
-# utility to manipulate system configuration information help
-# in a RedBoot SysConf partition
-#
-# load the utility functions (unless this is being called just
-# to load these functions!)
-test "$1" != sysconf && . /etc/default/functions
-
-# NSLU2 flash layout is non-standard.
-case "$(machine)" in
-nslu2)
-	kpart="Kernel"
-	syspart="SysConf"
-	ffspart="Flashdisk";;
-*)
-	kpart="kernel"
-	syspart="sysconfig"
-	ffspart="filesystem";;
-esac
-#
-# sysconf_valid
-#  return true if the SysConf partition exists and seems to be
-#  potentially valid (it starts with a reasonable length).
-sysconf_valid(){
-	local sysdev
-	sysdev="$(mtblockdev $syspart)"
-	test -n "$sysdev" -a -b "$sysdev" &&
-		devio "<<$sysdev" '!! b.10>s32768<&!'
-}
-
-#
-# sysconf_read [prefix]
-#  read the $syspart partition (if present) writing the result into
-#  /etc/default/sysconf, if the result is empty it will be removed.
-sysconf_read(){
-	local sysdev sedcmd mac config_root
-	config_root="$1"
-	rm -f /tmp/sysconf.new
-	sysdev="$(mtblockdev $syspart)"
-	if sysconf_valid
-	then
-		# Read the defined part of $syspart into /etc/default/sysconf.
-		# $syspart has lines of two forms:
-		#
-		#  [section]
-		#  name=value
-		#
-		# In practice $syspart also contains other stuff, use the command:
-		#
-		#  devio '<</dev/mtd1;cpb'
-		#
-		# to examine the current settings.  The badly formatted stuff
-		# is removed (to be exact, the sed script selects only lines
-		# which match one of the two above).  The lan interface, which
-		# on NSLU2 defaults to ixp0, is changed to the correct value for
-		# slugos, eth0.  The bootproto, which LinkSys sets to static in
-		# manufacturing, is reset to dhcp if the IP is still the
-		# original (192.168.1.77)
-		sedcmd='/^\[[^][]*\]$/p;'
-		# only do the ip_addr and lan_interface fixups on NSLU2
-		if test "$(machine)" = nslu2
-		then
-			sedcmd="$sedcmd"'
-				s/^lan_interface=ixp0$/lan_interface=eth0/;
-				/^ip_addr=192\.168\.1\.77$/,/^bootproto/s/^bootproto=static$/bootproto=dhcp/;'
-		fi
-		# always fix up the hardware addr if it is present
-		mac="$(config mac)"
-		if test -n "$mac"
-		then
-			sedcmd="$sedcmd"'
-				s/^hw_addr=.*$/hw_addr='"$mac"'/;'
-		fi
-		# and only print lines of the correct form
-		sedcmd="$sedcmd"'
-			/^[-a-zA-Z0-9_][-a-zA-Z0-9_]*=/p'
-
-		devio "<<$sysdev" cpb fb1,10 | sed -n "$sedcmd" >/tmp/sysconf.new
-	fi
-	#
-	# test the result - sysconf must be non-empty
-	if test -s /tmp/sysconf.new
-	then
-		mv /tmp/sysconf.new "$config_root/etc/default/sysconf"
-	else
-		rm -f /tmp/sysconf.new
-		return 1
-	fi
-}
-
-#
-# sysconf_default [prefix]
-#  Provde a default /etc/default/sysconf when there is no $syspart partition,
-#  or when it is invalid, this function will read from an existing sysconf,
-#  copying the values into the new one.
-# sysconf_line tag config-tag
-#  write an appropriate line if the config value is non-empty
-sysconf_line(){
-	config "$2" | {
-		local value
-		read value
-		test -n "$value" && echo "$1"="$value"
-	}
-}
-#
-sysconf_default(){
-	local config_root
-	config_root="$1"
-	{	echo '[network]'
-		sysconf_line hw_addr mac
-		sysconf_line disk_server_name host
-		sysconf_line w_d_name domain
-		sysconf_line lan_interface iface
-		sysconf_line ip_addr ip
-		sysconf_line netmask netmask
-		sysconf_line gateway gateway
-		sysconf_line dns_server1 dns
-		sysconf_line dns_server2 dns2
-		sysconf_line dns_server3 dns3
-		sysconf_line bootproto boot
-	} >/tmp/sysconf.new
-	mv /tmp/sysconf.new "$config_root/etc/default/sysconf"
-}
-
-#
-# sysconf_reload [prefix]
-#  read the values from /etc/default/sysconf and use these values to set
-#  up the following system files:
-#
-#   /etc/hostname
-#   /etc/defaultdomain
-#   /etc/resolv.conf
-#   /etc/network/interfaces
-#   /etc/motd
-#
-sysconf_reload(){
-	local config_root host domain iface boot ip netmask gateway ifname iftype
-	config_root="$1"
-	host="$(config host)"
-	test -n "$host" && echo "$host" >"$config_root/etc/hostname"
-	domain="$(config domain)"
-	test -n "$domain" && echo "$domain" >"$config_root/etc/defaultdomain"
-	#
-	# The DNS server information gives up to three nameservers,
-	# but this currently only binds in the first.
-	{
-		test -n "$domain" && echo "search $domain"
-		test -n "$(config dns)" && echo "nameserver $(config dns)"
-		test -n "$(config dns2)" && echo "nameserver $(config dns2)"
-		test -n "$(config dns3)" && echo "nameserver $(config dns3)"
-	} >"$config_root/etc/resolv.conf"
-	#
-	# Ethernet information.  This goes into /etc/network/interfaces,
-	# however this is only used for static setup (and this is not
-	# the default).  With dhcp the slugos udhcp script,
-	# /etc/udhcpc.d/50default, loads the values from sysconf.
-	iface="$(config iface)"
-	boot="$(config boot)"
-	# Only dhcp and static are supported at present - bootp
-	# support requires installation of appropriate packages
-	# dhcp is the fail-safe
-	case "$boot" in
-	dhcp|static) ;;
-	*) boot=dhcp;;
-	esac
-	#
-	ip="$(config ip)"
-	netmask="$(config netmask)"
-	gateway="$(config gateway)"
-	{
-		echo "# /etc/network/interfaces"
-		echo "# configuration file for ifup(8), ifdown(8)"
-		echo "#"
-		echo "# The loopback interface"
-		echo "auto lo"
-		echo "iface lo inet loopback"
-		echo "#"
-		echo "# The interface used by default during boot"
-		echo "auto $iface"
-		echo "# Automatically generated from /etc/default/sysconf"
-		echo "# address, netmask and gateway are ignored for 'dhcp'"
-		echo "# but required for 'static'"
-		echo "iface $iface inet $boot"
-		# The following are ignored for DHCP but are harmless
-		test -n "$ip"      && echo "	address $ip"
-		test -n "$netmask" && echo "	netmask $netmask"
-		test -n "$gateway" && echo "	gateway $gateway"
-		#
-		# Now read all the other ARPHRD_ETHER (type=1) interfaces
-		# and add an entry for each.
-		for ifname in $(test -d /sys/class/net && ls /sys/class/net)
-		do
-			if test -r "/sys/class/net/$ifname/type" -a "$ifname" != "$iface"
-			then
-				read iftype <"/sys/class/net/$ifname/type"
-				case "$iftype" in
-				1)	echo "#"
-					echo "# /sys/class/net/$ifname:"
-					echo "auto $ifname"
-					echo "iface $ifname inet dhcp";;
-				esac
-			fi
-		done
-	} >"$config_root/etc/network/interfaces"
-	#
-	# Finally rewrite /etc/motd
-	{	echo "Host name:           $host"
-		echo "Domain name:         $domain"
-		echo "Host MAC:            $(config mac)"
-		echo "Network boot method: $boot"
-		case "$boot" in
-		static) echo "Host IP address:     $ip";;
-		esac
-		echo "Use 'turnup init' to reset the configuration"
-		echo "Use 'turnup preserve' to save the configuration permanently"
-		echo "Use 'turnup restore' to restore a previously saved configuration"
-		echo "Use 'turnup disk|nfs -i <device> options to initialise a non-flash root"
-		echo "Use 'turnup help' for more information"
-	} >"$config_root/etc/motd"
-}
-
-#
-# sysconf_save_conffiles <flash-directory> <dest> <list>
-#  preserve the configuration files in a directory or in a CPIO archive
-#  (which is *not* compressed).  If <dest> is a directory the files are
-#  copied, otherwise a CPIO archive is made with that name.  <list> is
-#  the listing file giving the preserved files and the processing option.
-sysconf_save_conffiles(){
-	local ffsdir dest list file
-	ffsdir="$1"
-	saved="$2"
-	list="$3"
-	test -n "$ffsdir" -a -r "$ffsdir/etc/default/conffiles" -a -n "$saved" -a -n "$list" || {
-		echo "sysconf_save_conffiles: invalid arguments: '$*'" >&2
-		echo " usage sysconf_save_conffiles <flash-directory> <dest> <list>" >&2
-		return 1
-	}
-	#
-	(	cd "$ffsdir"
-		find etc/*.conf $(sed 's!^/!!' usr/lib/ipkg/info/*.conffiles) ! -type d -newer etc/.configured -print |
-			sed 's/^/diff /'
-		exec sed 's/#.*$//;/^[ 	]*$/d' etc/default/conffiles
-	) | sed 's!^/*!!' |
-	awk '{ op=$1; $1=""; file[$0]=op }
-		END{ for (f in file) if (file[f] != "ignore") print file[f] f }' |
-	while read op file
-	do
-		if test -e "$ffsdir/$file"
-		then
-			echo "$op $file" >&3
-			echo "$file"
-		fi
-	done 3>"$list" | (
-		cd "$ffsdir"
-		if test -d "$saved"
-		then
-			exec cpio -p -d -m -u "$saved"
-		else
-			exec cpio -o -H crc >"$saved"
-		fi
-	)
-}
-
-#
-# sysconf_verify file
-#  this is called with the name of a 'diff' file which is, indeed,
-#  different and with all the std streams connected to the tty.  It
-#  returns a status code to say whether (0) or not (1) to copy the
-#  file over.
-#
-# globals: the following must be defined in the calling context!
-#  saved:  the directory containing the unpacked saved files
-#  ffsdir: the flash directory to which the files are being restored (/)
-#
-sysconf_verify_help() {
-	echo "Please specify how to handle this file or link, the options are as follows,"
-	echo "two character abbreviations may be used:"
-	echo
-	echo " keep:    retain the old file, overwrite the new flash image file"
-	echo " upgrade: retain the new file, the old (saved) file is not used"
-	echo " diff:    display the differences between the old and the new using diff -u"
-	echo " shell:   temporarily start an interactive shell (sh -i), exit to continue"
-	echo " skip:    ignore this file for the moment.  The file is left in the directory"
-	echo "          $saved and many be handled after this script has completed"
-}
-#
-sysconf_verify() {
-	local command file
-
-	# return 1 here causes the file not to be overwritten,
-	# control should never get here!
-	test -n "$sysconf_noninteractive" && {
-		echo "$0: $*: changed file cannot be handled non-interactively" >&2
-		return 1
-	}
-
-	file="$1"
-	echo "$0: $file: configuration file changed."
-	sysconf_verify_help "$file"
-	while :
-	do
-		echo -n "option: "
-		read command
-		case "$command" in
-		ke*)	return 0;;
-		up*)	rm "$saved/$file"
-			return 1;;
-		di*)	echo "DIFF OLD($saved) NEW($ffsdir)"
-			diff -u "$saved/$file" "$ffsdir/$file";;
-		sh*)	PS1="$file: " sh -i;;
-		sk*)	return 1;;
-		*)	sysconf_verify_help "$file";;
-		esac
-	done
-}
-# the same, but for a link
-sysconf_verify_link() {
-	local command link
-
-	# return 1 here causes the file not to be overwritten,
-	# control should never get here!
-	test -n "$sysconf_noninteractive" && {
-		echo "$0: $*: changed link cannot be handled non-interactively" >&2
-		return 1
-	}
-
-	link="$1"
-	echo "reflash: $link: configuration link changed."
-	sysconf_verify_help "$link"
-	while :
-	do
-		echo -n "option: "
-		read command
-		case "$command" in
-		ke*)	return 0;;
-		up*)	rm "$saved/$link"
-			return 1;;
-		di*)	echo "DIFF:"
-			echo "OLD($saved): $link -> $(readlink "$saved/$link")"
-			echo "NEW($ffsdir): $link -> $(readlink "$ffsdir/$link")";;
-		sh*)	PS1="$link: " sh -i;;
-		sk*)	return 1;;
-		*)	sysconf_verify_help "$link";;
-		esac
-	done
-}
-
-#
-# sysconf_restore_conffiles <flash-directory> <source-dir> <restore>
-#  restore the configuration files from a directory.  'source-dir'
-#  If <source> is a directory of files from sysconf_save_conffiles.  The
-#  list of files restored is written to the third argument (restore),
-#  but is not required (/dev/null would be ok).
-#
-#  the list of files to restore is read from stdin, along with the
-#  processing option for each file (the format is as produced by
-#  sysconf_save_conffiles in the 'list' output).
-sysconf_restore_conffiles(){
-	local ffsdir saved restore
-	# these are the globals used by the above function
-	ffsdir="$1"
-	saved="$2"
-	restore="$3"
-	test -n "$ffsdir" -a -r "$ffsdir/etc/default/conffiles" -a -d "$saved" -a -n "$restore" || {
-		echo "restore_conffiles: invalid arguments: '$*'" >&2
-		echo " usage sysconf_restore_conffiles <flash-directory> <source-dir> <list>" >&2
-		return 1
-	}
-	#
-	# read the list and process each given file
-	while read op file
-	do
-		# handle .configured specially (to preserve the original datestamp)
-		if test "$file" = "etc/.configured"
-		then
-			# this should definately not fail because of the test above!
-			if cp -a "$saved/$file" "$ffsdir/$file"
-			then
-				echo "$file" >&3
-			else
-				echo "sysconf_restore_conffiles: $file: timestamp copy failed (ignored)" >&2
-			fi
-		elif test -h "$saved/file" -o -h "$ffsdir/$file"
-		then
-			# new or old symbolic link
-			if test -h "$saved/$file" -a -h "$ffsdir/$file" &&
-				test "$(readlink "$saved/$file")" = "$(readlink "$ffsdir/$file")"
-			then
-				# no change
-				echo "$file" >&3
-			else
-				# assume a change regardless
-				case "$op" in
-				preserve)
-					echo "$file"
-					echo "$file" >&3;;
-				diff)	# need user input
-					if sysconf_verify_link "$file" <>/dev/tty >&0 2>&0
-					then
-						echo "$file"
-						echo "$file" >&3
-					fi;;
-				esac
-			fi
-		else
-			# only overwrite if necessary
-			if test -e "$ffsdir/$file" && cmp -s "$saved/$file" "$ffsdir/$file"
-			then
-				# do not overwrite
-				echo "$file" >&3
-			elif test ! -e "$ffsdir/$file"
-			then
-				# always preserve
-				echo "$file"
-				echo "$file" >&3
-			else
-				case "$op" in
-				preserve)
-					echo "$file"
-					echo "$file" >&3;;
-				diff)	# the files are different, get user input
-					if sysconf_verify "$file" <>/dev/tty >&0 2>&0
-					then
-						echo "$file"
-						echo "$file" >&3
-					fi;;
-				esac
-			fi
-		fi
-	done 3>"$restore" | (cd "$saved"; exec cpio -p -d -u "$ffsdir")
-}
-
-#
-# sysconf_test_restore <flash-directory> <source-dir>
-#  return true only if the restore does not need to do an interactive
-#  compare
-sysconf_test_restore(){
-	local ffsdir saved
-	# these are the globals used by the above function
-	ffsdir="$1"
-	saved="$2"
-	# this is an error case, but return 0 so that the error is
-	# detected later
-	test -n "$ffsdir" -a -r "$ffsdir/etc/default/conffiles" -a -d "$saved" ||
-		return 0
-	#
-	# read the list and check each diff file (this is just a copy of the
-	# logic above with all the work removed!)
-	while read op file
-	do
-		# handle .configured specially (to preserve the original datestamp)
-		if test "$op" != diff
-		then
-			: # no diff required
-		elif test "$file" = "etc/.configured"
-		then
-			: # special handling
-		elif test -h "$saved/file" -o -h "$ffsdir/$file"
-		then
-			# new or old symbolic link
-			if test -h "$saved/$file" -a -h "$ffsdir/$file" &&
-				test "$(readlink "$saved/$file")" = "$(readlink "$ffsdir/$file")"
-			then
-				: # no change
-			else
-				# assume a change regardless
-				return 1
-			fi
-		else
-			# only overwrite if necessary
-			if test -e "$ffsdir/$file" && cmp -s "$saved/$file" "$ffsdir/$file"
-			then
-				: # do not overwrite
-			elif test ! -e "$ffsdir/$file"
-			then
-				: # always preserve
-			else
-				# a change
-				return 1
-			fi
-		fi
-	done
-
-	return 0
-}
-
-#
-# sysconf_save
-#  save the system configuration to $syspart - $syspart must exist and
-#  there must be a writeable device for it.
-sysconf_save(){
-	local sysdev ffsdev ffsdir saved list size status
-	ffsdev="$(mtblockdev $ffspart)"
-	sysdev="$(mtblockdev $syspart)"
-	status=1
-	if test -n "$sysdev" -a -b "$sysdev" -a -n "$ffsdev" -a -b "$ffsdev"
-	then
-		# this will succeed silently if the flash device is on /
-		umountflash "$ffsdev" || exit 1
-		#
-		# Everything is umounted, now remount on a temporary directory.
-		ffsdir="/tmp/flashdisk.$$"
-		mkdir "$ffsdir" || {
-			echo "$0: $ffsdir: failed to create temporary directory" >&2
-			exit 1
-		}
-		#
-		mountflash "$ffsdev" "$ffsdir" -o ro || {
-			rmdir "$ffsdir"
-			exit 1
-		}
-		# need temporary files for the cpio output and the listing
-		saved=/tmp/cpio.$$
-		list=/tmp/preserve.$$
-		rm -rf "$saved" "$list"
-		sysconf_save_conffiles "$ffsdir" "$saved" "$list" || {
-			echo "$0: $saved: archive of saved configuration files failed" >&2
-			rm -rf "$saved"
-			rm "$list"
-			umount "$ffsdir" && rmdir "$ffsdir" ||
-				echo "$0: $ffsdir: temporary directory cleanup failed" >&2
-			return 1
-		}
-		# ignore the error in this case:
-		umount "$ffsdir" && rmdir "$ffsdir" ||
-			echo "$0: $ffsdir: temporary directory cleanup failed" >&2
-		#
-		# we now have:
-		#  /etc/default/sysconf	the basic config
-		#  /tmp/preserve.$$	the list of saved files
-		#  /tmp/cpio.$$		the CPIO archive of those files
-		#
-		# make one big file with the sysconf data followed by the
-		# compressed archive in /tmp/sysconf.$$
-		{	{	cat /etc/default/sysconf
-				echo '[preserve]'
-			} | sed -n '1,/^\[preserve\]^/p'
-			while read op file
-			do
-				echo "$op"="$file"
-			done <"$list"
-		} >/tmp/sysconf.$$
-		size="$(devio "<</tmp/sysconf.$$" 'pr$')"
-		gzip -9 <"$saved" >>/tmp/sysconf.$$
-		#
-		# more cleanup, then try to write the new sysconf to $syspart
-		# the format is a 4 byte big-endian length then the text data
-		# if the data won't fit exit with error code 7
-		rm "$saved" "$list"
-		devio -p "<</tmp/sysconf.$$" ">>$sysdev" '
-			$( $4+ # >
-			!! 7
-			$) 0
-			wb '"$size"',4
-			cp $'
-		case $? in
-		0)	echo " done" >&2
-			status=0;;
-		1)	echo " failed" >&2
-			echo " $syspart could not be written (no changes made)" >&2;;
-		3)	echo " failed" >&2
-			echo " $syspart partially written, you may want to reset it" >&2;;
-		7)	echo " failed" >&2
-			echo " $syspart is too small: $size bytes required" >&2
-			echo " No change made" >&2;;
-		*)	echo " failed" >&2
-			echo " Internal error writing $syspart" >&2;;
-		esac
-		#
-		rm -f /tmp/sysconf.$$
-	else
-		echo "sysconf save: $syspart or $ffspart partition not found" >&2
-		echo " A RedBoot partition named '$syspart' must exist in the system" >&2
-		echo " flash memory for this command to work, and there must be a" >&2
-		echo " block device to access this partition (udev will normally" >&2
-		echo " create this automatically.  The flash partition contents must" >&2
-		echo " also be accessible in a partition called '$ffspart'" >&2
-		echo
-		echo " To create the $syspart partition use the 'fis create' command" >&2
-		echo " in the RedBoot boot loader, it is sufficient to make the" >&2
-		echo " partition one erase block in size unless you have substantially" >&2
-		echo " increased the size of the files listed in /etc/default/conffiles" >&2
-	fi
-
-	return $status
-}
-
-#
-# sysconf_restore [auto]
-#  restore previously saved configuration information from $syspart
-sysconf_restore_error(){
-	local root
-	root="$1"
-	shift
-	#       -------------------------------------------------------------------------------
-	{	echo "          WARNING: saved configuration files not restored"
-		test -n "$1" && echo "$*"
-		echo
-		echo "The configuration of this machine has been reinitialised using the values"
-		echo "from /etc/default/sysconf, however configuration files saved in the $syspart"
-		echo "partition have not been restored."
-		echo
-		echo "You can restore these files by correcting any reported errors then running"
-		echo
-		echo "  sysconf restore"
-		echo
-		echo "from the command line.  This will completely reinitialise the configuration"
-		echo "using the information in the $syspart partition."
-	} >"$root/etc/motd"
-	cat "$root/etc/motd" >&2
-}
-#
-sysconf_restore(){
-	local sysdev ffsdev ffsdir saved restore size status sysconf_noninteractive config_root
-
-	# if set this means 'do no diff' - this avoids the code above which
-	# would open /dev/tty and therefore allows this stuff to be done from
-	# an init script
-	sysconf_noninteractive=
-	test "$1" = auto && sysconf_noninteractive=1
-
-	ffsdev="$(mtblockdev $ffspart)"
-	sysdev="$(mtblockdev $syspart)"
-	status=1
-	if test -n "$sysdev" -a -b "$sysdev" -a -n "$ffsdev" -a -b "$ffsdev" &&
-		sysconf_valid
-	then
-		# this will succeed silently if the flash device is on /
-		umountflash "$ffsdev" || exit 1
-		#
-		# Everything is umounted, now remount on a temporary directory.
-		ffsdir="/tmp/flashdisk.$$"
-		config_root="$ffsdir"
-		mkdir "$ffsdir" || {
-			echo "$0: $ffsdir: failed to create temporary directory" >&2
-			exit 1
-		}
-		#
-		mountflash "$ffsdev" "$ffsdir" || {
-			rmdir "$ffsdir"
-			exit 1
-		}
-		#
-		# first restore the $syspart section
-		sysconf_read "$ffsdir" || sysconf_default "$ffsdir"
-		#
-		# now use this to regenerate the system files
-		sysconf_reload "$ffsdir"
-		#
-		# now examine the [preserve] section, if it is there restore
-		# it if possible.
-		if test -n "$(syssection preserve)"
-		then
-			# 'saved' is a directory, 'restore' is a file (which is
-			# used to detect unrestored files).  The directory needs
-			# to be populated with files.
-			saved=/tmp/cpio.$$
-			restore=/tmp/restore.$$
-			rm -rf "$saved" "$restore"
-			#
-			mkdir "$saved" || {
-				sysconf_restore_error "$ffsdir" "$saved: failed to create temporary directory"
-				return 1
-			}
-			#
-			# the CPIO archive is gzip compressed after the text part
-			# of sysconf, gzip will handle the LZ stream termination
-			# correctly (and break the pipe) so we don't need to know
-			# the real length of the data
-			devio "<<$sysdev" '<=b4+.' 'cp $s-' | gunzip | (
-				cd "$saved"
-				exec cpio -i -d -m -u
-			) || {
-				rm -rf "$saved"
-				sysconf_restore_error "$ffsdir" "$saved: cpio -i failed"
-				return 1
-			}
-			# either there must be no 'diff' files or it must
-			# be possible to interact with a real user.
-			if test -z "$sysconf_noninteractive" ||
-				syssection preserve | sysconf_test_restore "$ffsdir" "$saved"
-			then
-				#
-				# remove the 'init' motd from sysconf_reload
-				rm "$ffsdir/etc/motd"
-				#
-				# now restore from the directory, using the information in
-				# the preserve section, if this fails in a non-interactive
-				# setting the system might not reboot
-				syssection preserve |
-					sysconf_restore_conffiles "$ffsdir" "$saved" "$restore" || {
-					# there is a chance of the user cleaning this up
-#------------------------------------------------------------------------------
-					sysconf_restore_error "$ffsdir" \
-"$0: $saved: restore of saved configuration files failed.
-  The flash file system is mounted on $ffsdir.
-  The saved files are in $saved and the list of files selected for
-  restore is in $restore.
-  You should restore any required configuration from $saved, then umount
-  $ffsdir and reboot."
-  						# this prevents cleanup/umount
-						return 1
-				}
-				#
-				# remove the copied files (i.e. the ones which were preserved)
-				(	cd "$saved"
-					exec rm $(cat "$restore")
-				)
-				rm "$restore"
-				#
-				# clean up, files left in $saved need to be handled by the user
-				files="$(find "$saved" ! -type d -print)"
-				if test -n "$files"
-				then
-#------------------------------------------------------------------------------
-					sysconf_restore_error "$ffsdir" \
-"$0: some saved configuration files have not been handled:
-
-$files
-
-These files can be examined in $saved and restored to
-$ffsdir if required.  The saved files are in a temporary
-directory and will not be retained across a reboot - copy then elsewhere if
-you are unsure whether they are needed."
-					return 1
-				fi
-				#
-				# so this is safe now (no files, links etc)
-				rm -rf "$saved"
-			else
-				rm -rf "$saved"
-				# non-interactive and some changed diff files
-				sysconf_restore_error "$ffsdir" \
-"$0: some of the saved configuration files must be
-examined before restoration"
-				# but continue to the umount
-			fi
-		fi
-		#
-		# ignore the error in this case:
-		umount "$ffsdir" && rmdir "$ffsdir" ||
-			echo "$0: $ffsdir: temporary directory cleanup failed" >&2
-		status=0
-	else
-		echo "sysconf restore: $syspart or $ffspart partition not found" >&2
-		echo " You must have used 'sysconf save' to save configuration data" >&2
-		echo " into the $syspart partition before using this command.  The command" >&2
-		echo " will restore the configuration data to the flash root partition" >&2
-		echo " named '$ffspart' - this must also be accessible." >&2
-	fi
-
-	return $status
-}
-
-#
-# sysconf_help
-#  help text
-sysconf_help(){
-	#     -------------------------------------------------------------------------------
-	echo "sysconf: usage: sysconf read|default|reload|save|restore" >&2
-	echo " read:    the current $syspart partition is read into /etc/default/sysconf" >&2
-	echo " default: a default /etc/default/sysconf is created" >&2
-	echo " reload:  system configuration files are recreated from /etc/default/sysconf" >&2
-	echo " save:    /etc/default/sysconf and the files listed in /etc/default/conffiles" >&2
-	echo "          are written to the $syspart partition" >&2
-	echo " restore: the configuration information in the $syspart partition saved by" >&2
-	echo "          'sysconf save' is restored" >&2
-}
-
-#
-# the real commands
-#if [ "$(machine)" = "storcenter" ]; then
-#	echo "sysconf not (yet) supported on storcenter"
-#	exit 0
-#fi
-sysconf_command="$1"
-test $# -gt 0 && shift
-case "$sysconf_command" in
-read)	sysconf_read "$@";;
-default)sysconf_default "$@";;
-reload)	sysconf_reload "$@";;
-save)	sysconf_save "$@";;
-restore)sysconf_restore "$@";;
-valid)  sysconf_valid "$@";;
-
-sysconf)# just load the functions
-	;;
-
-*)	# help text
-	sysconf_help "$@";;
-esac