Disable bk EOLN_NATIVE conversions on all files in packages FILESPATHs, to prevent it screwing up patches.

BKrev: 4190111fA4MuVozAqwE7xOSL9fr-TA

11 files changed, 16598 insertions, 0 deletions

diff --git a/orinoco/orinoco-modules-0.13e/crosscompile.patch b/orinoco/orinoco-modules-0.13e/crosscompile.patch
index e69de29bb2..5963e931c2 100644
--- a/orinoco/orinoco-modules-0.13e/crosscompile.patch
+++ b/orinoco/orinoco-modules-0.13e/crosscompile.patch
@@ -0,0 +1,48 @@
+--- orinoco-0.13e/Makefile~crosscompile	2003-05-12 08:22:27.000000000 +0200
++++ orinoco-0.13e/Makefile	2003-06-15 18:17:21.000000000 +0200
+@@ -19,7 +19,7 @@
+ endif
+ endif
+ 
+-MODULES = hermes.o orinoco.o orinoco_cs.o orinoco_plx.o orinoco_tmd.o orinoco_pci.o
++MODULES = hermes.o orinoco.o orinoco_cs.o orinoco_plx.o orinoco_tmd.o orinoco_pci.o spectrum_cs.o
+ ifeq ($(shell uname -m),ppc)
+ MODULES += airport.o
+ endif
+@@ -27,9 +27,9 @@
+ SRCS = hermes.c \
+ 	orinoco.c \
+ 	airport.c orinoco_cs.c orinoco_plx.c orinoco_tmd.c orinoco_pci.c \
+-	userhermes.c
++	userhermes.c spectrum_cs.c
+ HDRS = hermes.h hermes_rid.h ieee802_11.h orinoco.h
+-CONF = hermes.conf
++CONF = hermes.conf spectrum.conf
+ TAR = tar
+ 
+ DISTFILES = $(SRCS) $(HDRS) $(CONF) Makefile README.orinoco
+@@ -41,7 +41,7 @@
+ all: modules
+ 
+ installconf:
+-	if [ -d $(CONF_DIR) ]; then install -m 644 -o 0 -g 0 $(CONF) $(CONF_DIR)/$(CONF); fi
++	if [ -d $(CONF_DIR) ]; then install -m 644 $(CONF) $(CONF_DIR)/; fi
+ 
+ 
+ userhermes: userhermes.c
+@@ -118,12 +118,12 @@
+ 	mkdir -p $(MODULE_DIR_WIRELESS)
+ 	for f in $(MODULES); do \
+ 	    if test -e $(MODULE_DIR_PCMCIA)/$$f; then \
+-		install -m 644 -o 0 -g 0 $$f $(MODULE_DIR_PCMCIA)/$$f; \
++		install -m 644 $$f $(MODULE_DIR_PCMCIA)/$$f; \
+ 	    else \
+-		install -m 644 -o 0 -g 0 $$f $(MODULE_DIR_WIRELESS)/$$f; \
++		install -m 644 $$f $(MODULE_DIR_WIRELESS)/$$f; \
+ 	    fi; \
+ 	done
+-	depmod -a
++	#depmod -a
+ 
+ %.o: %.c
+ 	$(CC) -MD $(CFLAGS) $(CPPFLAGS) $(MFLAG) -c $<
diff --git a/orinoco/orinoco-modules-0.13e/monitor-0.13e.patch b/orinoco/orinoco-modules-0.13e/monitor-0.13e.patch
index e69de29bb2..cfffced893 100644
--- a/orinoco/orinoco-modules-0.13e/monitor-0.13e.patch
+++ b/orinoco/orinoco-modules-0.13e/monitor-0.13e.patch
@@ -0,0 +1,758 @@
+diff -urN dist/orinoco-0.13e/hermes.c orinoco-monitor/hermes.c
+--- dist/orinoco-0.13e/hermes.c	2003-05-12 16:22:27.000000000 +1000
++++ orinoco-monitor/hermes.c	2003-05-13 13:26:02.000000000 +1000
+@@ -183,6 +183,10 @@
+ 	if (err)
+ 		return err;
+ 
++	for (k = 0; k < HERMES_NUMPORTS_MAX; k++) {
++		hw->port_enabled[k] = 0;
++	}
++
+ 	reg = hermes_read_regn(hw, EVSTAT);
+ 	k = CMD_INIT_TIMEOUT;
+ 	while ( (! (reg & HERMES_EV_CMD)) && k) {
+diff -urN dist/orinoco-0.13e/hermes.h orinoco-monitor/hermes.h
+--- dist/orinoco-0.13e/hermes.h	2003-05-12 16:22:27.000000000 +1000
++++ orinoco-monitor/hermes.h	2003-05-07 16:54:45.000000000 +1000
+@@ -33,6 +33,10 @@
+ #include <linux/if_ether.h>
+ #include <asm/byteorder.h>
+ 
++#define		HFA384x_PORTTYPE_IBSS			((uint16_t)3)
++#define		HFA384x_WEPFLAGS_DISABLE_TXCRYPT	(0x10)
++#define		HFA384x_WEPFLAGS_DISABLE_RXCRYPT	(0x80)
++
+ /*
+  * Limits and constants
+  */
+@@ -148,6 +152,14 @@
+ #define		HERMES_MONITOR_ENABLE		(0x000b)
+ #define		HERMES_MONITOR_DISABLE		(0x000f)
+ 
++/*--------------------------------------------------------------------
++Communication Frames: Field Masks for Receive Frames
++--------------------------------------------------------------------*/
++/*-- Offsets --------*/
++#define		HERMES_RX_DATA_LEN_OFF		(44)
++#define		HERMES_RX_80211HDR_OFF		(14)
++#define		HERMES_RX_DATA_OFF			(60)
++
+ /*
+  * Frame structures and constants
+  */
+@@ -171,6 +183,7 @@
+ #define	HERMES_RXSTAT_BADCRC		(0x0001)
+ #define	HERMES_RXSTAT_UNDECRYPTABLE	(0x0002)
+ #define	HERMES_RXSTAT_MACPORT		(0x0700)
++#define HERMES_RXSTAT_GET_MACPORT(s)	(((s) & HERMES_RXSTAT_MACPORT) >> 8)
+ #define HERMES_RXSTAT_PCF		(0x1000)	/* Frame was received in CF period */
+ #define	HERMES_RXSTAT_MSGTYPE		(0xE000)
+ #define	HERMES_RXSTAT_1042		(0x2000)	/* RFC-1042 frame */
+@@ -286,6 +299,7 @@
+ #define HERMES_32BIT_REGSPACING	1
+ 
+ 	u16 inten; /* Which interrupts should be enabled? */
++ 	u8 port_enabled[HERMES_NUMPORTS_MAX];
+ 
+ #ifdef HERMES_DEBUG_BUFFER
+ 	struct hermes_debug_entry dbuf[HERMES_DEBUG_BUFSIZE];
+@@ -339,12 +353,14 @@
+ 
+ static inline int hermes_enable_port(hermes_t *hw, int port)
+ {
++	hw->port_enabled[port] = 1;
+ 	return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+ 				 0, NULL);
+ }
+ 
+ static inline int hermes_disable_port(hermes_t *hw, int port)
+ {
++	hw->port_enabled[port] = 0;
+ 	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 
+ 				 0, NULL);
+ }
+diff -urN dist/orinoco-0.13e/orinoco.c orinoco-monitor/orinoco.c
+--- dist/orinoco-0.13e/orinoco.c	2003-05-12 16:22:27.000000000 +1000
++++ orinoco-monitor/orinoco.c	2003-05-13 13:27:31.000000000 +1000
+@@ -1673,6 +1673,7 @@
+ 	struct header_struct hdr;
+ 	struct ethhdr *eh;
+ 	int err;
++	struct ieee802_11_hdr hdr80211;
+ 
+ 	rxfid = hermes_read_regn(hw, RXFID);
+ 
+@@ -1689,6 +1690,8 @@
+ 	
+ 	if (status & HERMES_RXSTAT_ERR) {
+ 		if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
++			if (dev->type != ARPHRD_ETHER)
++				goto sniffing;
+ 			wstats->discard.code++;
+ 			DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ 			       dev->name);
+@@ -1699,7 +1702,7 @@
+ 		stats->rx_errors++;
+ 		goto drop;
+ 	}
+-
++sniffing:
+ 	/* For now we ignore the 802.11 header completely, assuming
+            that the card's firmware has handled anything vital */
+ 
+@@ -1729,81 +1732,111 @@
+ 		stats->rx_errors++;
+ 		goto drop;
+ 	}
++	/* Now handle frame based on port# */
++	switch (HERMES_RXSTAT_GET_MACPORT(status)) {
++	case 0:
++		/* We need space for the packet data itself, plus an
++		 * ethernet header, plus 2 bytes so we can align the
++		 * IP header on a 32bit boundary, plus 1 byte so we
++		 * can read in odd length packets from the card, which
++		 * has an IO granularity of 16 bits */
++		skb = dev_alloc_skb(length+ETH_HLEN+2+1);
++		if (!skb) {
++			printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
++			       dev->name);
++			goto drop;
++		}
+ 
+-	/* We need space for the packet data itself, plus an ethernet
+-	   header, plus 2 bytes so we can align the IP header on a
+-	   32bit boundary, plus 1 byte so we can read in odd length
+-	   packets from the card, which has an IO granularity of 16
+-	   bits */  
+-	skb = dev_alloc_skb(length+ETH_HLEN+2+1);
+-	if (!skb) {
+-		printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+-		       dev->name);
+-		goto drop;
+-	}
+-
+-	skb_reserve(skb, 2); /* This way the IP header is aligned */
+-
+-	/* Handle decapsulation
+-	 * In most cases, the firmware tell us about SNAP frames.
+-	 * For some reason, the SNAP frames sent by LinkSys APs
+-	 * are not properly recognised by most firmwares.
+-	 * So, check ourselves */
+-	if(((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+-	   ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+-	   is_ethersnap(&hdr)) {
+-		/* These indicate a SNAP within 802.2 LLC within
+-		   802.11 frame which we'll need to de-encapsulate to
+-		   the original EthernetII frame. */
++		skb_reserve(skb, 2); /* This way the IP header is aligned */
+ 
+-		if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
+-			stats->rx_length_errors++;
++		/* Handle decapsulation In most cases, the firmware
++		 * tell us about SNAP frames.  For some reason, the
++		 * SNAP frames sent by LinkSys APs are not properly
++		 * recognised by most firmwares.  So, check ourselves
++		 * */
++		if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
++		    ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
++		    is_ethersnap(&hdr)) {
++			/* These indicate a SNAP within 802.2 LLC
++			 * within 802.11 frame which we'll need to
++			 * de-encapsulate to the original EthernetII
++			 * frame. */
++
++			if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
++				stats->rx_length_errors++;
++				goto drop;
++			}
++			
++			/* Remove SNAP header, reconstruct EthernetII frame */
++			data_len = length - ENCAPS_OVERHEAD;
++			data_off = HERMES_802_3_OFFSET + sizeof(hdr);
++			
++			eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
++			
++			memcpy(eh, &hdr, 2 * ETH_ALEN);
++			eh->h_proto = hdr.ethertype;
++		} else {
++			/* All other cases indicate a genuine 802.3 frame.  No
++			   decapsulation needed.  We just throw the whole
++			   thing in, and hope the protocol layer can deal with
++			   it as 802.3 */
++			data_len = length;
++			data_off = HERMES_802_3_OFFSET;
++			/* FIXME: we re-read from the card data we already read here */
++		}
++		
++		p = skb_put(skb, data_len);
++		err = hermes_bap_pread(hw, IRQ_BAP, p, RUP_EVEN(data_len),
++				       rxfid, data_off);
++		if (err) {
++			printk(KERN_ERR "%s: error %d reading frame. "
++			       "Frame dropped.\n", dev->name, err);
++			stats->rx_errors++;
++			goto drop;
++		}
++		
++		dev->last_rx = jiffies;
++		skb->dev = dev;
++		skb->protocol = eth_type_trans(skb, dev);
++		skb->ip_summed = CHECKSUM_NONE;
++		
++		/* Process the wireless stats if needed */
++		orinoco_stat_gather(dev, skb, &desc);
++		
++		/* Pass the packet to the networking stack */
++		netif_rx(skb);
++		stats->rx_packets++;
++		stats->rx_bytes += length;
++		
++		return;
++		
++	case 7:
++		if (status & HERMES_RXSTAT_BADCRC) {
++                        printk(KERN_DEBUG "%s: Received monitor frame: "
++			       "BADCRC set\n", dev->name);
+ 			goto drop;
+ 		}
+ 
+-		/* Remove SNAP header, reconstruct EthernetII frame */
+-		data_len = length - ENCAPS_OVERHEAD;
+-		data_off = HERMES_802_3_OFFSET + sizeof(hdr);
++		err = hermes_bap_pread(hw, IRQ_BAP, &hdr80211,
++				       sizeof(hdr80211), 
++				       rxfid, HERMES_RX_80211HDR_OFF);
+ 
+-		eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
++		if (err) {
++			printk(KERN_ERR "%s: error %d reading monitor frame. "
++			       "Frame dropped.\n", dev->name, err);
++			stats->rx_errors++;
++			goto drop;
++		}
+ 
+-		memcpy(eh, &hdr, 2 * ETH_ALEN);
+-		eh->h_proto = hdr.ethertype;
+-	} else {
+-		/* All other cases indicate a genuine 802.3 frame.  No
+-		   decapsulation needed.  We just throw the whole
+-		   thing in, and hope the protocol layer can deal with
+-		   it as 802.3 */
+-		data_len = length;
+-		data_off = HERMES_802_3_OFFSET;
+-		/* FIXME: we re-read from the card data we already read here */
+-	}
++		orinoco_int_rxmonitor(dev, rxfid, length,
++				      &desc, &hdr80211);
++                break;
+ 
+-	p = skb_put(skb, data_len);
+-	err = hermes_bap_pread(hw, IRQ_BAP, p, RUP_EVEN(data_len),
+-			       rxfid, data_off);
+-	if (err) {
+-		printk(KERN_ERR "%s: error %d reading frame. "
+-		       "Frame dropped.\n", dev->name, err);
+-		stats->rx_errors++;
+-		goto drop;
++	default:
++		printk("Received frame on unsupported port=%d\n",
++		       HERMES_RXSTAT_GET_MACPORT(status));
++		break;
+ 	}
+-
+-	dev->last_rx = jiffies;
+-	skb->dev = dev;
+-	skb->protocol = eth_type_trans(skb, dev);
+-	skb->ip_summed = CHECKSUM_NONE;
+-	
+-	/* Process the wireless stats if needed */
+-	orinoco_stat_gather(dev, skb, &desc);
+-
+-	/* Pass the packet to the networking stack */
+-	netif_rx(skb);
+-	stats->rx_packets++;
+-	stats->rx_bytes += length;
+-
+-	return;
+-
+  drop:	
+ 	stats->rx_dropped++;
+ 
+@@ -3598,6 +3631,159 @@
+ 	return 0;
+ }
+ 
++static int orinoco_wlansniff(struct net_device *dev, struct iwreq *wrq)
++{
++	struct orinoco_private *priv = dev->priv;
++	hermes_t *hw = &priv->hw;
++	int err = 0;
++	u16 word;
++	int *parms = (int *) wrq->u.name;
++	int enable = parms[0] > 0;
++	unsigned long flags;
++
++	err = orinoco_lock(priv, &flags);
++	if (err)
++		return err;
++
++	switch (enable) {
++	case 0:
++		/* Confirm that we're in monitor mode */
++		if (dev->type == ARPHRD_ETHER)
++			err = -EFAULT;
++
++		/* Disable monitor mode */
++		word =	HERMES_CMD_MONITOR | (HERMES_MONITOR_DISABLE << 8);
++		err = hermes_docmd_wait(hw, word, 0, NULL);
++		if (err)
++			break;
++
++		/* Disable port 0 */
++		err = hermes_disable_port(hw, 0);
++		if (err)
++			break;
++
++		/* Clear the driver state */
++		dev->type = ARPHRD_ETHER;
++
++		/* Restore the wepflags */   /*Orinoco doesn't like this*/
++#if 0
++		err = hermes_write_wordrec(hw, USER_BAP,
++					   HERMES_RID_CNFWEPFLAGS_INTERSIL, 
++					   priv->presniff_wepflags);
++		if (err)
++			break;
++#endif /* 0 */
++
++		/* Set the port to its prior type and enable (if necessary) */
++		if (priv->presniff_port_type != 0) {
++			word = priv->presniff_port_type;
++			err = hermes_write_wordrec(hw, USER_BAP, 
++						   HERMES_RID_CNFPORTTYPE,
++						   word);
++			if (err)
++				break;
++			
++			/* Enable the port */
++			err = hermes_enable_port(hw, 0);
++			if (err)
++				break;
++		}
++
++		break;
++
++	case 1:
++		/* Re-initialize the card before changing channel as advised at
++		 * http://lists.samba.org/pipermail/wireless/2002-June/004491.html
++		 * by Ian Goldberg.  Implementation by Pat Swieskowski.
++		 */
++/*  		__orinoco_down(dev); */
++		hermes_set_irqmask(hw, 0);
++		hermes_init(hw);
++/*  		__orinoco_up(dev); */
++		hermes_set_irqmask(hw, ORINOCO_INTEN);
++		/* Disable the port (if enabled), only check Port 0 */
++		if (hw->port_enabled[0]) {
++			/* Save macport 0 state */
++			err = hermes_read_wordrec(hw, USER_BAP,
++						  HERMES_RID_CNFPORTTYPE,
++						  &(priv->presniff_port_type));
++			if (err)
++				break;
++		    
++			/* Save the wepflags state */
++			err = hermes_read_wordrec(hw, USER_BAP,
++						  HERMES_RID_CNFWEPFLAGS_INTERSIL,
++						  &(priv->presniff_wepflags));
++			if (err)
++				break;
++			err = hermes_disable_port(hw, 0);
++			if (err)
++				break;
++		} else {
++			priv->presniff_port_type = 0;
++		}
++
++		/* Set the channel we wish to sniff  */
++		if ((parms[1] > 0) && (parms[1] < 15)) {
++			word = parms[1];
++			err = hermes_write_wordrec(hw, USER_BAP, 
++						   HERMES_RID_CNFOWNCHANNEL,
++						   word);
++		} else {
++			err = -EFAULT;
++		}
++
++		if (err)
++			break;
++
++		/* Set the port type to pIbss */
++		word = HFA384x_PORTTYPE_IBSS;
++		err = hermes_write_wordrec(hw, USER_BAP, 
++					   HERMES_RID_CNFPORTTYPE, word);
++		if (err)
++			break;
++
++#if 0
++		if ( (msg->keepwepflags.status == P80211ENUM_msgitem_status_data_ok) && 
++		     (msg->keepwepflags.data != 1)) {
++			/* Set the wepflags for no decryption */
++			/* Orinoco doesn't like this */
++			word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT | 
++				HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
++			err = hermes_write_wordrec(hw, USER_BAP, 
++						   HERMES_RID_CNFWEPFLAGS_INTERSIL,
++						   word); /*won't work with the bits above */
++		}
++		if (err)
++			break;
++#endif /* 0 */
++		/* Enable the port */
++		err = hermes_enable_port(hw, 0);
++		if (err)
++			break;
++
++		/* Enable monitor mode */
++		word =	HERMES_CMD_MONITOR | (HERMES_MONITOR_ENABLE << 8);
++		err = hermes_docmd_wait(hw, word, 0, NULL);
++		if (err)
++			break;
++
++		/* Set the driver state */
++		/* Do we want the prism2 header? */
++		if (parms[0] == 1)
++			dev->type = ARPHRD_IEEE80211_PRISM;
++		else 
++			dev->type = ARPHRD_IEEE80211;
++		break;
++	default:
++		BUG();
++		break;
++	}
++
++	orinoco_unlock(priv, &flags);
++	return err;
++}
++
+ static int
+ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+@@ -3830,6 +4016,9 @@
+ 				{ SIOCIWFIRSTPRIV + 0x7, 0,
+ 				  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 				  "get_ibssport" },
++				{ SIOCIWFIRSTPRIV + 0x8,
++				  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2,
++				  0, "monitor" },
+ 				{ SIOCIWLASTPRIV, 0, 0, "dump_recs" },
+ 			};
+ 
+@@ -3924,6 +4113,16 @@
+ 		err = orinoco_ioctl_getibssport(dev, wrq);
+ 		break;
+ 
++	case SIOCIWFIRSTPRIV + 0x8: /* set sniff (monitor) mode */ 
++		DEBUG(1, "%s: SIOCIWFIRSTPRIV + 0x8 (monitor)\n",
++		      dev->name);
++		if (! capable(CAP_NET_ADMIN)) {
++			err = -EPERM;
++			break;
++		}
++		err = orinoco_wlansniff(dev, wrq);
++		break;
++
+ 	case SIOCIWLASTPRIV:
+ 		err = orinoco_debug_dump_recs(dev);
+ 		if (err)
+@@ -4171,6 +4370,191 @@
+ 
+ }
+ 
++/*----------------------------------------------------------------
++* orinoco_int_rxmonitor
++*
++* Handles monitor frames.  Note that this function allocates space for
++* the FCS and sets it to 0xffffffff.  The hfa384x doesn't give us the
++* FCS value but the higher layers expect it.  0xffffffff is used as a
++* flag to indicate the FCS is bogus.
++*
++* Arguments:
++*	dev		wlan device structure
++*	rxfid		received FID
++*	rxdesc		rx descriptor read from card in int_rx
++*
++* Side effects:
++*	Allocates an skb and passes it up via the PF_PACKET interface.
++* Call context:
++*	interrupt
++----------------------------------------------------------------*/
++void orinoco_int_rxmonitor(struct net_device *dev, u16 rxfid,
++			   int len, struct hermes_rx_descriptor *rxdesc,
++			   struct ieee802_11_hdr *hdr)
++{
++	struct orinoco_private *priv = dev->priv;
++	hermes_t *hw = &priv->hw;
++	u32 hdrlen = 0;
++	u32 datalen = 0;
++	u32 skblen = 0;
++	p80211msg_lnxind_wlansniffrm_t *msg;
++	struct net_device_stats *stats = &priv->stats;
++	u8 *datap;
++	u16 fc;
++	struct sk_buff *skb;
++
++	/* Don't forget the status, time, and data_len fields are in
++	 * little-endian order */
++	/* Figure out how big the frame is */
++	fc = le16_to_cpu(hdr->frame_ctl);
++	switch (fc & IEEE802_11_FCTL_FTYPE) {
++	case IEEE802_11_FTYPE_DATA:
++		if ((fc & IEEE802_11_FCTL_TODS)
++		    && (fc & IEEE802_11_FCTL_FROMDS))
++			hdrlen = WLAN_HDR_A4_LEN;
++		else
++			hdrlen = WLAN_HDR_A3_LEN;
++		datalen = len;
++		break;
++	case IEEE802_11_FTYPE_MGMT:
++		hdrlen = WLAN_HDR_A3_LEN;
++		datalen = len;
++		break;
++	case IEEE802_11_FTYPE_CTL:
++		switch (fc & IEEE802_11_FCTL_STYPE) {
++		case IEEE802_11_STYPE_PSPOLL:
++		case IEEE802_11_STYPE_RTS:
++		case IEEE802_11_STYPE_CFEND:
++		case IEEE802_11_STYPE_CFENDACK:
++			hdrlen = 16;
++			break;
++		case IEEE802_11_STYPE_CTS:
++		case IEEE802_11_STYPE_ACK:
++			hdrlen = 10;
++			break;
++		}
++		datalen = 0;
++		break;
++	default:
++		printk("unknown frm: fc=0x%04x\n", fc);
++		return;
++	}
++
++	/* Allocate an ind message+framesize skb */
++	skblen = sizeof(p80211msg_lnxind_wlansniffrm_t) + 
++		hdrlen + datalen;
++	
++	/* sanity check the length */
++	if ( skblen > 
++		( (sizeof(p80211msg_lnxind_wlansniffrm_t) + 
++		   WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN) ) ) {
++		printk("overlen frm: len=%d\n", 
++		       skblen - sizeof(p80211msg_lnxind_wlansniffrm_t));
++	}
++
++	if ( (skb = dev_alloc_skb(skblen)) == NULL ) {
++		printk("alloc_skb failed trying to allocate %d bytes\n", skblen);
++		return;
++	}
++
++	/* only prepend the prism header if in the right mode */
++	if (dev->type != ARPHRD_IEEE80211_PRISM) {
++		skb_put(skb, skblen - sizeof(p80211msg_lnxind_wlansniffrm_t));
++		datap = skb->data;
++	} else {
++		skb_put(skb, skblen);
++		datap = skb->data + sizeof(p80211msg_lnxind_wlansniffrm_t);
++		msg = (p80211msg_lnxind_wlansniffrm_t*)skb->data;
++
++		/* Initialize the message members */
++		msg->msgcode = DIDmsg_lnxind_wlansniffrm;
++		msg->msglen = sizeof(p80211msg_lnxind_wlansniffrm_t);
++		strcpy(msg->devname, dev->name);
++	  
++		msg->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
++		msg->hosttime.status = 0;
++		msg->hosttime.len = 4;
++		msg->hosttime.data = jiffies;
++	  
++		msg->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
++		msg->mactime.status = 0;
++		msg->mactime.len = 4;
++		msg->mactime.data = rxdesc->time;
++	  
++		msg->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
++		msg->channel.status = P80211ENUM_msgitem_status_no_value;
++		msg->channel.len = 4;
++		msg->channel.data = 0;
++
++		msg->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
++		msg->rssi.status = P80211ENUM_msgitem_status_no_value;
++		msg->rssi.len = 4;
++		msg->rssi.data = 0;
++	  
++		msg->sq.did = DIDmsg_lnxind_wlansniffrm_sq;
++		msg->sq.status = P80211ENUM_msgitem_status_no_value;
++		msg->sq.len = 4;
++		msg->sq.data = 0;
++	  
++		msg->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
++		msg->signal.status = 0;
++		msg->signal.len = 4;
++		msg->signal.data = rxdesc->signal;
++	  
++		msg->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
++		msg->noise.status = 0;
++		msg->noise.len = 4;
++		msg->noise.data = rxdesc->silence;
++
++		msg->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
++		msg->rate.status = 0;
++		msg->rate.len = 4;
++		msg->rate.data = rxdesc->rate / 5; /* set to 802.11 units */
++  
++		msg->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
++		msg->istx.status = 0;
++		msg->istx.len = 4;
++		msg->istx.data = 0;
++	  
++		msg->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
++		msg->frmlen.status = 0;
++		msg->frmlen.len = 4;
++		msg->frmlen.data = hdrlen + datalen;
++	}
++
++	/* Copy the 802.11 header to the skb (ctl frames may be less
++	 * than a full header) */
++	memcpy(datap, &(hdr->frame_ctl), hdrlen);
++
++	/* If any, copy the data from the card to the skb */
++	if (datalen > 0) {
++		hermes_bap_pread(hw, IRQ_BAP, datap + hdrlen, (datalen+1)&~1,
++				 rxfid, HERMES_RX_DATA_OFF);
++
++		/* check for unencrypted stuff if WEP bit set. */
++		if (datap[1] & 0x40) /* wep set */
++			if ((datap[hdrlen] == 0xaa)
++			    && (datap[hdrlen+1] == 0xaa))
++				datap[1] &= 0xbf; /* clear wep; it's the 802.2 header! */
++	}
++
++	/* pass it up via the PF_PACKET interface */
++	skb->dev = dev;
++	skb->dev->last_rx = jiffies;
++
++	skb->mac.raw = skb->data ;
++	skb->ip_summed = CHECKSUM_NONE;
++	skb->pkt_type = PACKET_OTHERHOST;
++	skb->protocol = htons(ETH_P_80211_RAW);  /* XXX ETH_P_802_2? */
++	
++	stats->rx_packets++;
++	stats->rx_bytes += skb->len;
++
++	netif_rx(skb);
++
++	return;
++}
++
+ /********************************************************************/
+ /* Module initialization                                            */
+ /********************************************************************/
+diff -urN dist/orinoco-0.13e/orinoco.h orinoco-monitor/orinoco.h
+--- dist/orinoco-0.13e/orinoco.h	2003-05-12 16:22:27.000000000 +1000
++++ orinoco-monitor/orinoco.h	2003-05-13 13:27:02.000000000 +1000
+@@ -37,6 +37,16 @@
+ /* To enable debug messages */
+ //#define ORINOCO_DEBUG		3
+ 
++#define ETH_P_80211_RAW        (ETH_P_ECONET + 1)
++
++#ifndef ARPHRD_IEEE80211
++#define ARPHRD_IEEE80211 801     /* kernel 2.4.6 */
++#endif
++
++#ifndef ARPHRD_IEEE80211_PRISM  /* kernel 2.4.18 */
++#define ARPHRD_IEEE80211_PRISM 802
++#endif
++
+ #if (! defined (WIRELESS_EXT)) || (WIRELESS_EXT < 10)
+ #error "orinoco driver requires Wireless extensions v10 or later."
+ #endif /* (! defined (WIRELESS_EXT)) || (WIRELESS_EXT < 10) */
+@@ -55,6 +65,67 @@
+ 				HERMES_EV_INFDROP )
+ 
+ 
++#define WLAN_DEVNAMELEN_MAX 16
++
++/* message data item for INT, BOUNDEDINT, ENUMINT */
++typedef struct p80211item_uint32 {
++	u32 did;
++	u16 status;
++	u16 len;
++	u32 data;
++} __attribute__ ((packed)) p80211item_uint32_t;
++
++#define DIDmsg_lnxind_wlansniffrm		0x0041
++#define DIDmsg_lnxind_wlansniffrm_hosttime	0x1041
++#define DIDmsg_lnxind_wlansniffrm_mactime	0x2041
++#define DIDmsg_lnxind_wlansniffrm_channel	0x3041
++#define DIDmsg_lnxind_wlansniffrm_rssi		0x4041
++#define DIDmsg_lnxind_wlansniffrm_sq		0x5041
++#define DIDmsg_lnxind_wlansniffrm_signal	0x6041
++#define DIDmsg_lnxind_wlansniffrm_noise		0x7041
++#define DIDmsg_lnxind_wlansniffrm_rate		0x8041
++#define DIDmsg_lnxind_wlansniffrm_istx		0x9041
++#define DIDmsg_lnxind_wlansniffrm_frmlen	0xA041
++
++typedef struct p80211msg_lnxind_wlansniffrm {
++	u32 msgcode;
++	u32 msglen;
++	u8 devname[WLAN_DEVNAMELEN_MAX];
++	p80211item_uint32_t hosttime;
++	p80211item_uint32_t mactime;
++	p80211item_uint32_t channel;
++	p80211item_uint32_t rssi;
++	p80211item_uint32_t sq;
++	p80211item_uint32_t signal;
++	p80211item_uint32_t noise;
++	p80211item_uint32_t rate;
++	p80211item_uint32_t istx;
++	p80211item_uint32_t frmlen;
++} __attribute__ ((packed)) p80211msg_lnxind_wlansniffrm_t;
++
++#define P80211ENUM_msgitem_status_data_ok		0
++#define P80211ENUM_msgitem_status_no_value		1
++#define P80211ENUM_msgitem_status_invalid_itemname	2
++#define P80211ENUM_msgitem_status_invalid_itemdata	3
++#define P80211ENUM_msgitem_status_missing_itemdata	4
++#define P80211ENUM_msgitem_status_incomplete_itemdata	5
++#define P80211ENUM_msgitem_status_invalid_msg_did	6
++#define P80211ENUM_msgitem_status_invalid_mib_did	7
++#define P80211ENUM_msgitem_status_missing_conv_func	8
++#define P80211ENUM_msgitem_status_string_too_long	9
++#define P80211ENUM_msgitem_status_data_out_of_range	10
++#define P80211ENUM_msgitem_status_string_too_short	11
++#define P80211ENUM_msgitem_status_missing_valid_func	12
++#define P80211ENUM_msgitem_status_unknown		13
++#define P80211ENUM_msgitem_status_invalid_did		14
++#define P80211ENUM_msgitem_status_missing_print_func	15
++
++/*--- Sizes -----------------------------------------------*/
++#define WLAN_CRC_LEN			4
++#define WLAN_HDR_A3_LEN			24
++#define WLAN_HDR_A4_LEN			30
++#define WLAN_DATA_MAXLEN		2312
++
+ struct orinoco_private {
+ 	void *card;	/* Pointer to card dependent structure */
+ 	int (*hard_reset)(struct orinoco_private *);
+@@ -116,6 +187,9 @@
+ 	/* Configuration dependent variables */
+ 	int port_type, createibss;
+ 	int promiscuous, mc_count;
++
++	u16 presniff_port_type;
++	u16 presniff_wepflags;
+ };
+ 
+ #ifdef ORINOCO_DEBUG
diff --git a/orinoco/orinoco-modules-0.13e/shmoo-monitor-0.13e.patch b/orinoco/orinoco-modules-0.13e/shmoo-monitor-0.13e.patch
index e69de29bb2..fe9693f69c 100644
--- a/orinoco/orinoco-modules-0.13e/shmoo-monitor-0.13e.patch
+++ b/orinoco/orinoco-modules-0.13e/shmoo-monitor-0.13e.patch
@@ -0,0 +1,797 @@
+diff -aur orinoco-0.13e/hermes.c orinoco-0.13e-patched/hermes.c
+--- orinoco-0.13e/hermes.c	2003-05-11 23:22:27.000000000 -0700
++++ orinoco-0.13e-patched/hermes.c	2003-08-07 04:16:04.000000000 -0700
+@@ -183,6 +183,10 @@
+ 	if (err)
+ 		return err;
+ 
++        for ( k = 0; k < HERMES_NUMPORTS_MAX; k++) {
++		hw->port_enabled[k] = 0;
++	}
++
+ 	reg = hermes_read_regn(hw, EVSTAT);
+ 	k = CMD_INIT_TIMEOUT;
+ 	while ( (! (reg & HERMES_EV_CMD)) && k) {
+diff -aur orinoco-0.13e/hermes.h orinoco-0.13e-patched/hermes.h
+--- orinoco-0.13e/hermes.h	2003-05-11 23:22:27.000000000 -0700
++++ orinoco-0.13e-patched/hermes.h	2003-08-07 04:16:04.000000000 -0700
+@@ -33,6 +33,10 @@
+ #include <linux/if_ether.h>
+ #include <asm/byteorder.h>
+ 
++#define		HFA384x_PORTTYPE_IBSS			((uint16_t)3)
++#define		HFA384x_WEPFLAGS_DISABLE_TXCRYPT	(0x10)
++#define		HFA384x_WEPFLAGS_DISABLE_RXCRYPT	(0x80)
++
+ /*
+  * Limits and constants
+  */
+@@ -149,6 +153,38 @@
+ #define		HERMES_MONITOR_DISABLE		(0x000f)
+ 
+ /*
++ * Configuration RIDs
++ */
++
++#define		HERMES_RID_CNF_PORTTYPE		(0xfc00)
++#define		HERMES_RID_CNF_CHANNEL		(0xfc03)
++#define		HERMES_RID_CNF_PRISM2_WEP_ON	(0xfc28)
++
++/*-- Status Fields --*/
++#define		HERMES_RXSTATUS_MSGTYPE		(0xE000)
++#define		HERMES_RXSTATUS_MACPORT		(0x0700)
++#define		HERMES_RXSTATUS_UNDECR		(0x0002)
++#define		HERMES_RXSTATUS_FCSERR		(0x0001)
++
++/*--------------------------------------------------------------------
++Communication Frames: Test/Get/Set Field Values for Receive Frames
++--------------------------------------------------------------------*/
++#define		HERMES_RXSTATUS_MSGTYPE_GET(value)	(((value) & HERMES_RXSTATUS_MSGTYPE) >> 13)
++#define		HERMES_RXSTATUS_MSGTYPE_SET(value)	((value) << 13)
++#define		HERMES_RXSTATUS_MACPORT_GET(value)	(((value) & HERMES_RXSTATUS_MACPORT) >> 8)
++#define		HERMES_RXSTATUS_MACPORT_SET(value)	((value) << 8)
++#define		HERMES_RXSTATUS_ISUNDECR(value)	((value) & HERMES_RXSTATUS_UNDECR)
++#define		HERMES_RXSTATUS_ISFCSERR(value)	((value) & HERMES_RXSTATUS_FCSERR)
++
++/*--------------------------------------------------------------------
++Communication Frames: Field Masks for Receive Frames
++--------------------------------------------------------------------*/
++/*-- Offsets --------*/
++#define		HERMES_RX_DATA_LEN_OFF		(44)
++#define		HERMES_RX_80211HDR_OFF		(14)
++#define		HERMES_RX_DATA_OFF			(60)
++
++/*
+  * Frame structures and constants
+  */
+ 
+@@ -286,6 +322,7 @@
+ #define HERMES_32BIT_REGSPACING	1
+ 
+ 	u16 inten; /* Which interrupts should be enabled? */
++ 	uint8_t		port_enabled[HERMES_NUMPORTS_MAX];
+ 
+ #ifdef HERMES_DEBUG_BUFFER
+ 	struct hermes_debug_entry dbuf[HERMES_DEBUG_BUFSIZE];
+@@ -339,12 +376,14 @@
+ 
+ static inline int hermes_enable_port(hermes_t *hw, int port)
+ {
++        hw->port_enabled[port] = 1;
+ 	return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+ 				 0, NULL);
+ }
+ 
+ static inline int hermes_disable_port(hermes_t *hw, int port)
+ {
++        hw->port_enabled[port] = 0;
+ 	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 
+ 				 0, NULL);
+ }
+diff -aur orinoco-0.13e/orinoco.c orinoco-0.13e-patched/orinoco.c
+--- orinoco-0.13e/orinoco.c	2003-05-11 23:22:27.000000000 -0700
++++ orinoco-0.13e-patched/orinoco.c	2003-08-07 04:16:04.000000000 -0700
+@@ -1673,6 +1673,7 @@
+ 	struct header_struct hdr;
+ 	struct ethhdr *eh;
+ 	int err;
++        struct ieee802_11_hdr hdr80211;
+ 
+ 	rxfid = hermes_read_regn(hw, RXFID);
+ 
+@@ -1689,6 +1690,7 @@
+ 	
+ 	if (status & HERMES_RXSTAT_ERR) {
+ 		if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
++                    if (dev->type != ARPHRD_ETHER) goto sniffing;
+ 			wstats->discard.code++;
+ 			DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ 			       dev->name);
+@@ -1699,7 +1701,7 @@
+ 		stats->rx_errors++;
+ 		goto drop;
+ 	}
+-
++sniffing:
+ 	/* For now we ignore the 802.11 header completely, assuming
+            that the card's firmware has handled anything vital */
+ 
+@@ -1730,6 +1732,11 @@
+ 		goto drop;
+ 	}
+ 
++	/* Now handle frame based on port# */
++	switch( HERMES_RXSTATUS_MACPORT_GET(status) )
++	{
++	case 0:
++
+ 	/* We need space for the packet data itself, plus an ethernet
+ 	   header, plus 2 bytes so we can align the IP header on a
+ 	   32bit boundary, plus 1 byte so we can read in odd length
+@@ -1804,6 +1811,26 @@
+ 
+ 	return;
+ 
++	case 7:
++        	if ( ! HERMES_RXSTATUS_ISFCSERR(status) ) {
++                   if (hermes_bap_pread(hw, IRQ_BAP, &hdr80211, sizeof(hdr80211), 
++                                       rxfid, HERMES_RX_80211HDR_OFF)) {
++                      stats->rx_errors++;
++                   }
++                   else {
++                        /* Copy to wlansnif skb */
++                        orinoco_int_rxmonitor( priv, rxfid, length, &desc, &hdr80211);
++                   }
++                } else {