Disable bk EOLN_NATIVE conversions on all files in packages FILESPATHs, to prevent it screwing up patches.

BKrev: 4190111fA4MuVozAqwE7xOSL9fr-TA

4 files changed, 3213 insertions, 0 deletions

diff --git a/linux/openzaurus-2.6.10-rc1-jl1/collie-config-2.6.7-jl2 b/linux/openzaurus-2.6.10-rc1-jl1/collie-config-2.6.7-jl2
index e69de29bb2..ae8799e7a3 100644
--- a/linux/openzaurus-2.6.10-rc1-jl1/collie-config-2.6.7-jl2
+++ b/linux/openzaurus-2.6.10-rc1-jl1/collie-config-2.6.7-jl2
@@ -0,0 +1,769 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE_PB is not set
+CONFIG_SHARP_LOCOMO=y
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_ADSBITSY is not set
+# CONFIG_SA1100_BRUTUS is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_EXTENEX1 is not set
+# CONFIG_SA1100_FLEXANET is not set
+# CONFIG_SA1100_FREEBIRD is not set
+# CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_HUW_WEBPANEL is not set
+# CONFIG_SA1100_ITSY is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_NANOENGINE is not set
+# CONFIG_SA1100_OMNIMETER is not set
+# CONFIG_SA1100_PANGOLIN is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SHERMAN is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_PFS168 is not set
+# CONFIG_SA1100_VICTOR is not set
+# CONFIG_SA1100_XP860 is not set
+# CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_STORK is not set
+# CONFIG_SA1100_SSP is not set
+# CONFIG_SA1100_USB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_MINICACHE=y
+
+#
+# Processor Features
+#
+
+#
+# General setup
+#
+CONFIG_DISCONTIGMEM=y
+CONFIG_ISA=y
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_CPU_FREQ is not set
+
+#
+# PCMCIA/CardBus support
+#
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SA1100=y
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Generic Driver Options
+#
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PM=y
+CONFIG_PREEMPT=y
+CONFIG_APM=y
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2"
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_AMDSTD is not set
+CONFIG_MTD_SHARP=y
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_EDB7312 is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_NETDEVICES is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_ISA=m
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+# CONFIG_JFFS2_FS_NAND is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_EXPORTFS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_SA1100=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# Misc devices
+#
+
+#
+# USB support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+CONFIG_USB_GADGET_SA1100=y
+CONFIG_USB_SA1100=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/linux/openzaurus-2.6.10-rc1-jl1/husky-config-2.6.7-jl2 b/linux/openzaurus-2.6.10-rc1-jl1/husky-config-2.6.7-jl2
index e69de29bb2..347657f8ec 100644
--- a/linux/openzaurus-2.6.10-rc1-jl1/husky-config-2.6.7-jl2
+++ b/linux/openzaurus-2.6.10-rc1-jl1/husky-config-2.6.7-jl2
@@ -0,0 +1,855 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+CONFIG_ARCH_PXA=y
+CONFIG_PXA25x=y
+# CONFIG_PXA27x is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+
+#
+# Epxa10db
+#
+
+#
+# Footbridge Implementations
+#
+
+#
+# IOP3xx Implementation Options
+#
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
+
+#
+# IOP3xx Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
+#
+# Intel PXA250/210 Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_PXA_CERF is not set
+# CONFIG_COTULLA_DMA is not set
+# CONFIG_SABINAL_DISCOVERY is not set
+# CONFIG_ARCH_SABINAL is not set
+# CONFIG_ARCH_PXA_POODLE is not set
+# CONFIG_POODLE_TR0 is not set
+CONFIG_ARCH_PXA_CORGI=y
+# CONFIG_MACH_CORGI is not set
+CONFIG_MACH_HUSKY=y
+# CONFIG_CORGI_TR0 is not set
+CONFIG_CORGI_LCD_BUFF=y
+# CONFIG_ARCH_PXA_SHEPHERD is not set
+CONFIG_ARCH_PXA_HUSKY=y
+# CONFIG_ARCH_PXA_BOXER is not set
+CONFIG_ARCH_SHARP_SL=y
+CONFIG_SL_CCCR_CHANGE=y
+CONFIG_SL_CCCR242=y
+
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_ADSBITSY is not set
+# CONFIG_SA1100_BRUTUS is not set
+# CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_COLLIE is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_EXTENEX1 is not set
+# CONFIG_SA1100_FLEXANET is not set
+# CONFIG_SA1100_FREEBIRD is not set
+# CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_HUW_WEBPANEL is not set
+# CONFIG_SA1100_ITSY is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_NANOENGINE is not set
+# CONFIG_SA1100_OMNIMETER is not set
+# CONFIG_SA1100_PANGOLIN is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SHERMAN is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_PFS168 is not set
+# CONFIG_SA1100_VICTOR is not set
+# CONFIG_SA1100_XP860 is not set
+# CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_STORK is not set
+# CONFIG_SA1100_SSP is not set
+# CONFIG_SA1100_USB is not set
+
+#
+# Processor Type
+#
+# CONFIG_CPU_32v3 is not set
+# CONFIG_CPU_32v4 is not set
+# CONFIG_CPU_ARM610 is not set
+# CONFIG_CPU_ARM710 is not set
+# CONFIG_CPU_ARM720T is not set
+# CONFIG_CPU_ARM920T is not set
+# CONFIG_CPU_ARM922T is not set
+# CONFIG_PLD is not set
+# CONFIG_CPU_ARM926T is not set
+# CONFIG_CPU_ARM1020 is not set
+# CONFIG_CPU_SA110 is not set
+# CONFIG_CPU_SA1100 is not set
+CONFIG_CPU_32=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_XSCALE=y
+
+CONFIG_SPU_ABRT_EV5T=y
+CONFIG_CPU_TLB_v4WBI=y
+CONFIG_CPU_MINICACHE=y
+
+
+##### CONFIG_BATT=y
+# CONFIG_XSCALE_CACHE_ERRATA is not set
+##### CONFIG_ARM_THUMB=y
+##### CONFIG_ARM_FCSE=y
+# CONFIG_DISCONTIGMEM is not set
+##### CONFIG_PREEMPT=y
+##### CONFIG_LOCK_BREAK=y
+
+#
+# Processor Features
+#
+
+#
+# General setup
+#
+CONFIG_DISCONTIGMEM=y
+CONFIG_ISA=y
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_CPU_FREQ is not set
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# above was not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Generic Driver Options
+#
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PM=y
+CONFIG_PREEMPT=y
+CONFIG_APM=y
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="console=ttyS0,9600n8 console=tty0 noinitrd root=/dev/mtdblock4 rootfstype=jffs2"
+
+# CONFIG_CMDLINE="console=null root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),25600k@7168k(root),-(home) jffs2_orphaned_inodes=delete rootfstype=jffs2"
+# CONFIG_CMDLINE="root=/dev/mtdblock4 rootfstype=jffs2 jffs2_orphaned_inodes=delete console=null mem=16M"
+
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+#CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_GEN_PROBE is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SA1100=y
+# CONFIG_MTD_EDB7312 is not set
+#### CONFIG_MTD_SHARP_SL=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+####CONFIG_MTD_NAND=y
+####CONFIG_MTD_NAND_ECC=y
+####CONFIG_MTD_NAND_VERIFY_WRITE=y
+####CONFIG_MTD_NAND_POST_BADBLOCK=y
+# CONFIG_MTD_NAND_ERASE_BY_FORCE is not set
+####CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS=y
+####CONFIG_MTD_NAND_PAGE_CACHE=y
+####CONFIG_MTD_NAND_SHARP_SL_CORGI=y
+####CONFIG_MTD_NAND_SHARP_SL=y
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETDEVICES is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SHARP_LOCOMO=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+
+# CONFIG_KEYBOARD_COLLIE is not set
+
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SL7X0_POWER_KEY_OFF=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_SA1100 is not set
+# CONFIG_SERIAL_SA1100_CONSOLE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_ISA=m
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+# CONFIG_JFFS2_FS_NAND is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_EXPORTFS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Graphics support
+#
+####CONFIG_FB=y
+####CONFIG_FB_CORGI=y
+####CONFIG_SL_SYSCLK100=y
+# CONFIG_FB_SA1100 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+
+# BJL - Check these out later
+#CONFIG_FBCON_CFB16=y
+#CONFIG_FBCON_ADVANCED=y
+#CONFIG_FBCON_ROTATE_R=y
+
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_SOUND=y
+# CONFIG_SOUND_CORGI=y
+
+#
+# Misc devices
+#
+
+#
+# USB support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_SA1100 is not set
+# CONFIG_USB_SA1100 is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/linux/openzaurus-2.6.10-rc1-jl1/patch-2.6.5-rp1.diff b/linux/openzaurus-2.6.10-rc1-jl1/patch-2.6.5-rp1.diff
index e69de29bb2..5d69785a47 100644
--- a/linux/openzaurus-2.6.10-rc1-jl1/patch-2.6.5-rp1.diff
+++ b/linux/openzaurus-2.6.10-rc1-jl1/patch-2.6.5-rp1.diff
@@ -0,0 +1,881 @@
+diff -uNr linux-2.6.5-orig/arch/arm/Kconfig linux-2.6.5/arch/arm/Kconfig
+--- linux-2.6.5-orig/arch/arm/Kconfig	2004-06-14 20:31:51.000000000 +0100
++++ linux-2.6.5/arch/arm/Kconfig	2004-06-14 20:33:06.000000000 +0100
+@@ -500,7 +500,7 @@
+ 
+ config LEDS
+ 	bool "Timer and CPU usage LEDs"
+-	depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
++	depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
+ 	help
+ 	  If you say Y here, the LEDs on your machine will be used
+ 	  to provide useful information about your current system status.
+@@ -513,8 +513,8 @@
+ 	  system, but the driver will do nothing.
+ 
+ config LEDS_TIMER
+-	bool "Timer LED" if LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_P720T)
+-	depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
++	bool "Timer LED" if LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_P720T)
++	depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
+ 	default y if ARCH_EBSA110
+ 	help
+ 	  If you say Y here, one of the system LEDs (the green one on the
+@@ -529,7 +529,7 @@
+ 
+ config LEDS_CPU
+ 	bool "CPU usage LED"
+-	depends on LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_P720T)
++	depends on LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_P720T)
+ 	help
+ 	  If you say Y here, the red LED will be used to give a good real
+ 	  time indication of CPU usage, by lighting whenever the idle task
+diff -uNr linux-2.6.5-orig/arch/arm/Makefile linux-2.6.5/arch/arm/Makefile
+--- linux-2.6.5-orig/arch/arm/Makefile	2004-06-14 20:31:51.000000000 +0100
++++ linux-2.6.5/arch/arm/Makefile	2004-06-14 20:33:06.000000000 +0100
+@@ -54,8 +54,8 @@
+ tune-$(CONFIG_CPU_V6)		:=-mtune=strongarm
+ 
+ # Need -Uarm for gcc < 3.x
+-CFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm
+-AFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) -msoft-float -Wa,-mno-fpu
++CFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) -malignment-traps -msoft-float
++AFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) -msoft-float
+ 
+ #Default value
+ DATAADDR	:= .
+diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/Makefile linux-2.6.5/arch/arm/boot/compressed/Makefile
+--- linux-2.6.5-orig/arch/arm/boot/compressed/Makefile	2004-06-14 20:31:52.000000000 +0100
++++ linux-2.6.5/arch/arm/boot/compressed/Makefile	2004-06-14 20:33:06.000000000 +0100
+@@ -55,14 +55,18 @@
+ OBJS		+= head-xscale.o
+ endif
+ 
++ifeq ($(CONFIG_DEBUG_ICEDCC),y)
++OBJS            += ice-dcc.o
++endif
++
+ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/LOAD_ADDR/$(ZRELADDR)/;s/BSS_START/$(ZBSSADDR)/
+ 
+ targets       := vmlinux vmlinux.lds piggy piggy.gz piggy.o \
+                  font.o head.o $(OBJS)
+ EXTRA_CFLAGS  := -fpic
+-EXTRA_AFLAGS  := -traditional
++EXTRA_AFLAGS  :=
+ 
+-LDFLAGS_vmlinux := -p -X \
++LDFLAGS_vmlinux := -p --no-undefined -X \
+ 	$(shell $(CC) $(CFLAGS) --print-libgcc-file-name) -T
+ 
+ $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/head-xscale.S linux-2.6.5/arch/arm/boot/compressed/head-xscale.S
+--- linux-2.6.5-orig/arch/arm/boot/compressed/head-xscale.S	2004-06-14 20:31:52.000000000 +0100
++++ linux-2.6.5/arch/arm/boot/compressed/head-xscale.S	2004-06-14 20:33:06.000000000 +0100
+@@ -52,6 +52,18 @@
+ 		mov	r7, #MACH_TYPE_POODLE
+ #endif
+ 
++#ifdef CONFIG_MACH_CORGI
++@		mov	r7, #MACH_TYPE_CORGI
++		mov	r7, #0xa7
++		add 	r7, r7, #0x100
++#endif
++
++#ifdef CONFIG_MACH_HUSKY
++@		mov	r7, #MACH_TYPE_HUSKY
++		mov	r7, #0xde
++		add 	r7, r7, #0x100
++#endif
++
+ #ifdef CONFIG_ARCH_IQ80310
+ 		/*
+ 		 * Crank the CPU up to 733MHz
+diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/head.S linux-2.6.5/arch/arm/boot/compressed/head.S
+--- linux-2.6.5-orig/arch/arm/boot/compressed/head.S	2004-06-14 20:31:53.000000000 +0100
++++ linux-2.6.5/arch/arm/boot/compressed/head.S	2004-06-14 20:33:06.000000000 +0100
+@@ -10,6 +10,8 @@
+ #include <linux/config.h>
+ #include <linux/linkage.h>
+ 
++#define DEBUG 1
++
+ /*
+  * Debugging stuff
+  *
+@@ -25,6 +27,12 @@
+ 		.macro	writeb, rb
+ 		str	\rb, [r3, #0x160]
+ 		.endm
++#elif defined(CONFIG_DEBUG_ICEDCC)
++		.macro	loadsp, rb
++		.endm
++		.macro writeb, rb
++		mcr	p14, 0, \rb, c0, c1, 0
++		.endm
+ #elif defined(CONFIG_FOOTBRIDGE)
+ 		.macro	loadsp,	rb
+ 		mov	\rb, #0x7c000000
+@@ -67,6 +75,19 @@
+ 		.macro	writeb, rb
+ 		str	\rb, [r3, #0x14]	@ UTDR
+ 		.endm
++#elif defined(CONFIG_ARCH_IXP4XX)
++		.macro	loadsp, rb
++		mov	\rb, #0xc8000000
++		.endm
++		.macro	writeb, rb
++		str	\rb, [r3, #0]
++#elif defined(CONFIG_ARCH_LH7A40X)
++		.macro	loadsp, rb
++		ldr	\rb, =0x80000700	@ UART2 UARTBASE
++		.endm
++		.macro	writeb, rb
++		strb	\rb, [r3, #0]
++		.endm
+ #else
+ #error no serial architecture defined
+ #endif
+@@ -332,11 +353,19 @@
+ 		mov	r8, r0, lsr #18
+ 		mov	r8, r8, lsl #18		@ start of RAM
+ 		add	r9, r8, #0x10000000	@ a reasonable RAM size
+-		mov	r1, #0x12
++@#ifdef CONFIG_CPU_XSCALE
++		mov	r1, #0x02
++@#else
++@		mov	r1, #0x12
++@#endif
+ 		orr	r1, r1, #3 << 10
+ 		add	r2, r3, #16384
+ 1:		cmp	r1, r8			@ if virt > start of RAM
+-		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
++@#ifdef CONFIG_XSCALE_CACHE_ERRATA
++		orrhs	r1, r1, #0x08           @ set cacheable, not bufferable
++@#else
++@		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
++@#endif
+ 		cmp	r1, r9			@ if virt > end of RAM
+ 		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
+ 		str	r1, [r0], #4		@ 1:1 mapping
+diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/vmlinux.lds.in linux-2.6.5/arch/arm/boot/compressed/vmlinux.lds.in
+--- linux-2.6.5-orig/arch/arm/boot/compressed/vmlinux.lds.in	2004-06-14 20:31:53.000000000 +0100
++++ linux-2.6.5/arch/arm/boot/compressed/vmlinux.lds.in	2004-06-14 20:33:06.000000000 +0100
+@@ -47,7 +47,7 @@
+   .bss			: { *(.bss) }
+   _end = .;
+ 
+-  .stack (NOLOAD)	: { *(.stack) }
++  .stack 	: { *(.stack) }
+ 
+   .stab 0		: { *(.stab) }
+   .stabstr 0		: { *(.stabstr) }
+diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/Kconfig linux-2.6.5/arch/arm/mach-pxa/Kconfig
+--- linux-2.6.5-orig/arch/arm/mach-pxa/Kconfig	2004-06-14 20:31:53.000000000 +0100
++++ linux-2.6.5/arch/arm/mach-pxa/Kconfig	2004-06-14 20:33:06.000000000 +0100
+@@ -13,10 +13,23 @@
+ 	bool "SHARP Poodle"
+ 	depends on ARCH_PXA
+ 
++config MACH_CORGI
++	bool "SHARP Corgi (SL-C700)"
++	depends on ARCH_PXA 
++
++config MACH_SHEPHERD
++	bool "SHARP Shepherd (SL-C750)"
++	depends on ARCH_PXA 
++
++config MACH_HUSKY
++	bool "SHARP Husky (SL-C760)"
++	depends on ARCH_PXA 
++
+ config SHARP_LOCOMO
+ 	bool "SHARP LoCoMo support"
+ 	default Y
+-	depends MACH_POODLE
++	depends MACH_POODLE || MACH_CORGI || MACH_HUSKY
++
+ 
+ endmenu
+ 
+diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/Makefile linux-2.6.5/arch/arm/mach-pxa/Makefile
+--- linux-2.6.5-orig/arch/arm/mach-pxa/Makefile	2004-06-14 20:31:54.000000000 +0100
++++ linux-2.6.5/arch/arm/mach-pxa/Makefile	2004-06-14 20:33:06.000000000 +0100
+@@ -9,12 +9,18 @@
+ obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
+ obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
++obj-$(CONFIG_MACH_CORGI)	+= corgi.o
++obj-$(CONFIG_MACH_SHEPHERD)	+= corgi.o
++obj-$(CONFIG_MACH_HUSKY)	+= corgi.o
+ 
+ # Support for blinky lights
+ led-y := leds.o
+ led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
+ led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
+ led-$(CONFIG_MACH_POODLE)	+= leds-poodle.o
++led-$(CONFIG_MACH_CORGI)	+= leds-corgi.o
++led-$(CONFIG_MACH_SHEPHERD)	+= leds-corgi.o
++led-$(CONFIG_MACH_HUSKY)	+= leds-corgi.o
+ 
+ obj-$(CONFIG_LEDS) += $(led-y)
+ 
+diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/corgi.c linux-2.6.5/arch/arm/mach-pxa/corgi.c
+--- linux-2.6.5-orig/arch/arm/mach-pxa/corgi.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.5/arch/arm/mach-pxa/corgi.c	2004-06-14 20:33:19.000000000 +0100
+@@ -0,0 +1,178 @@
++/*
++ * linux/arch/arm/mach-pxa/corgi.c
++ *
++ *  Support for the SHARP Corgi Board.
++ *  
++ *  Copyright:	Lineo Japan Inc.
++ *
++ * Based on:
++ *  linux/arch/arm/mach-pxa/lubbock.c
++ *
++ *  Support for the Intel DBPXA250 Development Platform.
++ *  
++ *  Author:	Nicolas Pitre
++ *  Created:	Jun 15, 2001
++ *  Copyright:	MontaVista Software Inc.
++ *  
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ * Change Log
++ *  12-Dec-2002 Sharp Corporation for Corgi
++ *  01-Apr-2003 Sharp for Shepherd
++ *
++ *  Mar 10, 2004: Lots of changes to port to 2.6 by John Lenz
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/major.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/irq.h>
++#include <asm/arch/corgi.h>
++
++#include "generic.h"
++
++static void __init scoop_init(void)
++{
++
++#define	CORGI_SCP_INIT_DATA(adr,dat)	(((adr)<<16)|(dat))
++#define	CORGI_SCP_INIT_DATA_END	((unsigned long)-1)
++	static const unsigned long scp_init[] =
++	{
++		CORGI_SCP_INIT_DATA(CORGI_SCP_MCR,0x0140),  // 00
++		CORGI_SCP_INIT_DATA(CORGI_SCP_MCR,0x0100),
++		CORGI_SCP_INIT_DATA(CORGI_SCP_CDR,0x0000),  // 04
++		CORGI_SCP_INIT_DATA(CORGI_SCP_CPR,0x0000),  // 0C
++		CORGI_SCP_INIT_DATA(CORGI_SCP_CCR,0x0000),  // 10
++		CORGI_SCP_INIT_DATA(CORGI_SCP_IMR,0x0000),  // 18
++		CORGI_SCP_INIT_DATA(CORGI_SCP_IRM,0x00FF),  // 14
++		CORGI_SCP_INIT_DATA(CORGI_SCP_ISR,0x0000),  // 1C
++		CORGI_SCP_INIT_DATA(CORGI_SCP_IRM,0x0000),
++		CORGI_SCP_INIT_DATA(CORGI_SCP_GPCR,CORGI_SCP_IO_DIR),  // 20
++		CORGI_SCP_INIT_DATA(CORGI_SCP_GPWR,CORGI_SCP_IO_OUT),  // 24
++		CORGI_SCP_INIT_DATA_END
++	};
++	int	i;
++	for(i=0; scp_init[i] != CORGI_SCP_INIT_DATA_END; i++)
++	{
++		int	adr = scp_init[i] >> 16;
++		CORGI_SCP_REG(adr) = scp_init[i] & 0xFFFF;
++	}
++}
++
++static void __init corgi_init_irq(void)
++{
++	pxa_init_irq();
++
++	/* setup extra corgi irqs */
++
++	/* i2c initialize */
++	//i2c_init(); RPP Fixme!
++
++	/* scoop initialize */
++	scoop_init();
++
++	/* initialize SSP & CS */
++	/*pxa_ssp_init();*/
++}
++
++#if 0
++static void __init
++fixup_corgi(struct machine_desc *desc, struct param_struct *params,
++		char **cmdline, struct meminfo *mi)
++{
++#if defined(CONFIG_MACH_SHEPHERD) || defined(CONFIG_MACH_HUSKY)
++	SET_BANK (0, 0xa0000000, 64*1024*1024);
++#else
++	SET_BANK (0, 0xa0000000, 32*1024*1024);
++#endif
++	mi->nr_banks      = 1;
++#if defined(CONFIG_BLK_DEV_INITRD)
++	setup_ramdisk (1, 0, 0, 8192);
++	setup_initrd (__phys_to_virt(0xa1000000), 4*1024*1024);
++	ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
++#elif defined(CONFIG_MTD)
++	ROOT_DEV = MKDEV(31, 0);	/* /dev/mtdblock0 */
++#endif
++
++#ifdef CONFIG_SHARPSL_BOOTLDR_PARAMS
++	if (params->u1.s.page_size != PAGE_SIZE) {
++	    params->u1.s.page_size = PAGE_SIZE;
++	    params->u1.s.nr_pages = 32 * 1024 * 1024 / PAGE_SIZE;
++	    params->u1.s.ramdisk_size = 0;
++	    params->u1.s.flags = FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT;
++	    params->u1.s.rootdev = ROOT_DEV;
++	    params->u1.s.initrd_start = 0;
++	    params->u1.s.initrd_size = 0;
++	    params->u1.s.rd_start = 0;
++	    params->u1.s.system_rev = 0;
++	    params->u1.s.system_serial_low = 0;
++	    params->u1.s.system_serial_high = 0;
++	    strcpy(params->commandline, CONFIG_CMDLINE);
++	}
++#endif
++}
++#endif
++
++static struct map_desc corgi_io_desc[] __initdata = {
++ /* virtual     physical    length      */
++  { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE }, /* LCDC (readable for Qt driver) */
++  { 0xf2000000, 0x10800000, 0x00001000, MT_DEVICE }, /* SCOOP */
++  { 0xf2100000, 0x0C000000, 0x00001000, MT_DEVICE }, /* Nand Flash */
++  { 0xef000000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
++};
++
++static void __init corgi_map_io(void)
++{
++	pxa_map_io();
++	iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
++
++#if 0
++	/* This enables the BTUART */
++	CKEN |= CKEN7_BTUART;
++	set_GPIO_mode(GPIO42_BTRXD_MD);
++	set_GPIO_mode(GPIO43_BTTXD_MD);
++	set_GPIO_mode(GPIO44_BTCTS_MD);
++	set_GPIO_mode(GPIO45_BTRTS_MD);
++#endif
++
++	/* setup sleep mode values */
++	PWER  = 0x00000002;
++	PFER  = 0x00000000;
++	PRER  = 0x00000002;
++	PGSR0 = 0x0158C000;
++	PGSR1 = 0x00FF0080;
++	PGSR2 = 0x0001C004;
++	PCFR |= PCFR_OPDE;
++}
++
++#if defined(CONFIG_MACH_SHEPHERD)
++MACHINE_START(SHEPHERD, "SHARP Shepherd")
++#elseif defined(CONFIG_MACH_HUSKY)
++MACHINE_START(HUSKY, "SHARP Husky")
++#else
++MACHINE_START(CORGI, "SHARP Corgi")
++#endif
++	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
++#ifdef CONFIG_SHARPSL_BOOTLDR_PARAMS
++	BOOT_PARAMS(0xa0000100)
++#endif
++/*	FIXUP(fixup_corgi)*/
++	MAPIO(corgi_map_io)
++	INITIRQ(corgi_init_irq)
++MACHINE_END
+diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/leds-corgi.c linux-2.6.5/arch/arm/mach-pxa/leds-corgi.c
+--- linux-2.6.5-orig/arch/arm/mach-pxa/leds-corgi.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.5/arch/arm/mach-pxa/leds-corgi.c	2004-06-14 20:33:19.000000000 +0100
+@@ -0,0 +1,135 @@
++/*
++ * linux/arch/arm/mach-pxa/leds-corgi.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Copied from arch/arm/mach-sa1100/leds-collie.c
++ * ChangeLog:
++ * 	- John Lenz <4/27/04> - added support for new locomo device model
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/device.h>
++
++#include <asm/hardware.h>
++#include <asm/hardware/locomo.h>
++#include <asm/leds.h>
++#include <asm/system.h>
++
++#include "leds.h"
++
++#define LED_STATE_ENABLED	1
++#define LED_STATE_CLAIMED	2
++
++static struct locomo_dev *locomo_dev = NULL;
++static unsigned int led_state;
++static unsigned int hw_led0_state = 0;
++static unsigned int hw_led1_state = 0;
++
++#define	LED_ONOFF_MASK (LOCOMO_LPT_TOFL|LOCOMO_LPT_TOFH)
++#define	LED_OFF(REG) ((REG)|=LOCOMO_LPT_TOFL)
++#define	LED_ON(REG) ((REG)=((REG)&~LED_ONOFF_MASK)|LOCOMO_LPT_TOFH)
++#define LED_FLIP(REG)	((REG)^=LED_ONOFF_MASK)
++
++void corgi_leds_event(led_event_t evt)
++{
++        unsigned long flags;
++
++	local_irq_save(flags);
++
++        switch (evt) {
++        case led_start:
++                led_state = LED_STATE_ENABLED;
++		LED_ON(hw_led0_state);
++		LED_ON(hw_led1_state);
++                break;
++
++        case led_stop:
++                led_state &= ~LED_STATE_ENABLED;
++                break;
++
++        case led_claim:
++                led_state |= LED_STATE_CLAIMED;
++		LED_ON(hw_led0_state);
++		LED_ON(hw_led1_state);
++                break;
++
++        case led_release:
++                led_state &= ~LED_STATE_CLAIMED;
++		LED_ON(hw_led0_state);
++		LED_ON(hw_led1_state);
++                break;
++
++#ifdef CONFIG_LEDS_TIMER
++        case led_timer:
++                if (!(led_state & LED_STATE_CLAIMED)) {
++			LED_FLIP(hw_led0_state);
++		}
++                break;
++#endif
++
++#ifdef CONFIG_LEDS_CPU
++        case led_idle_start:
++		/* LED off when system is idle */
++                if (!(led_state & LED_STATE_CLAIMED))
++			LED_OFF(hw_led1_state);
++                break;
++
++        case led_idle_end:
++                if (!(led_state & LED_STATE_CLAIMED))
++			LED_ON(hw_led1_state);
++                break;
++#endif
++
++	default:
++		break;
++        }
++
++	
++        if  (locomo_dev && led_state & LED_STATE_ENABLED) {
++		locomo_writel(hw_led0_state, locomo_dev->mapbase + LOCOMO_LPT0);
++		locomo_writel(hw_led1_state, locomo_dev->mapbase + LOCOMO_LPT1);
++        }
++
++	local_irq_restore(flags);
++}
++
++static int corgiled_probe(struct locomo_dev *dev) {
++	/* set up the initial led states, since due to the init order,
++	 * corgi_leds_event(led_start) might have been called before this */
++        /*if  (led_state & LED_STATE_ENABLED) {
++		//LCM_LPT0 = hw_led0_state;
++		locomo_writel(hw_led0_state, dev->mapbase + LOCOMO_LPT0);
++		//LCM_LPT1 = hw_led1_state;
++		locomo_writel(hw_led1_state, dev->mapbase + LOCOMO_LPT1);
++        }*/
++	locomo_dev = dev;
++	return 0;
++}
++
++static int corgiled_remove(struct locomo_dev *dev) {
++	locomo_dev = NULL;
++	return 0;
++}
++
++static struct locomo_driver corgiled_driver = {
++	.drv = {
++		.name = "locomoled"
++	},
++	.devid	= LOCOMO_DEVID_LED,
++	.probe	= corgiled_probe,
++	.remove	= corgiled_remove,
++};
++
++static int __init corgiled_init(void) {
++	return locomo_driver_register(&corgiled_driver);
++}
++
++device_initcall(corgiled_init);
++
++MODULE_AUTHOR("John Lenz <jelenz@wisc.edu>");
++MODULE_DESCRIPTION("LoCoMo Corgi LED driver");
++MODULE_LICENSE("GPL");
+diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/leds.c linux-2.6.5/arch/arm/mach-pxa/leds.c
+--- linux-2.6.5-orig/arch/arm/mach-pxa/leds.c	2004-06-14 20:31:54.000000000 +0100
++++ linux-2.6.5/arch/arm/mach-pxa/leds.c	2004-06-14 20:33:06.000000000 +0100
+@@ -24,7 +24,8 @@
+ 		leds_event = idp_leds_event;
+ 	if (machine_is_poodle())
+ 		leds_event = poodle_leds_event;
+-
++	if (machine_is_corgi())
++		leds_event = corgi_leds_event;
+ 	leds_event(led_start);
+ 	return 0;
+ }
+diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/leds.h linux-2.6.5/arch/arm/mach-pxa/leds.h
+--- linux-2.6.5-orig/arch/arm/mach-pxa/leds.h	2004-06-14 20:31:54.000000000 +0100
++++ linux-2.6.5/arch/arm/mach-pxa/leds.h	2004-06-14 20:33:06.000000000 +0100
+@@ -10,3 +10,4 @@
+ extern void lubbock_leds_event(led_event_t evt);
+ extern void idp_leds_event(led_event_t evt);
+ extern void poodle_leds_event(led_event_t evt);
++extern void corgi_leds_event(led_event_t evt);
+diff -uNr linux-2.6.5-orig/arch/arm/tools/mach-types linux-2.6.5/arch/arm/tools/mach-types
+--- linux-2.6.5-orig/arch/arm/tools/mach-types	2004-06-14 20:31:55.000000000 +0100
++++ linux-2.6.5/arch/arm/tools/mach-types	2004-06-14 20:33:06.000000000 +0100
+@@ -485,3 +485,4 @@
+ vr1000			MACH_VR1000		VR1000			475
+ deisterpxa		MACH_DEISTERPXA		DEISTERPXA		476
+ bcm1160			MACH_BCM1160		BCM1160			477
++husky			MACH_HUSKY		HUSKY			478
+\ No newline at end of file
+diff -uNr linux-2.6.5-orig/drivers/serial/8250.c linux-2.6.5/drivers/serial/8250.c
+--- linux-2.6.5-orig/drivers/serial/8250.c	2004-06-14 20:31:55.000000000 +0100
++++ linux-2.6.5/drivers/serial/8250.c	2004-06-14 20:33:06.000000000 +0100
+@@ -169,7 +169,8 @@
+ 	{ "ST16654",	64,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+ 	{ "XR16850",	128,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+ 	{ "RSA",	2048,	UART_CLEAR_FIFO | UART_USE_FIFO },
+-	{ "NS16550A",	16,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI }
++	{ "NS16550A",	16,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI },
++	{ "XScale",	32,	UART_CLEAR_FIFO | UART_USE_FIFO  },
+ };
+ 
+ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
+@@ -1499,6 +1500,8 @@
+ 	up->ier &= ~UART_IER_MSI;
+ 	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ 		up->ier |= UART_IER_MSI;
++	if (up->port.type == PORT_XSCALE)
++		up->ier |= UART_IER_UUE | UART_IER_RTOIE;
+ 
+ 	serial_out(up, UART_IER, up->ier);
+ 
+@@ -1930,7 +1933,11 @@
+ 	 *	First save the UER then disable the interrupts
+ 	 */
+ 	ier = serial_in(up, UART_IER);
+-	serial_out(up, UART_IER, 0);
++
++	if (up->port.type == PORT_XSCALE)
++		serial_out(up, UART_IER, UART_IER_UUE);
++	else
++		serial_out(up, UART_IER, 0);
+ 
+ 	/*
+ 	 *	Now, do each character
+diff -uNr linux-2.6.5-orig/include/asm-arm/arch-pxa/corgi.h linux-2.6.5/include/asm-arm/arch-pxa/corgi.h
+--- linux-2.6.5-orig/include/asm-arm/arch-pxa/corgi.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.5/include/asm-arm/arch-pxa/corgi.h	2004-06-14 20:33:19.000000000 +0100
+@@ -0,0 +1,219 @@
++/*
++ * linux/include/asm-arm/arch-pxa/corgi.h
++ * 
++ * (C) Copyright 2001 Lineo Japan, Inc.
++ *
++ * May be copied or modified under the terms of the GNU General Public
++ * License.  See linux/COPYING for more information.
++ *
++ * Based on:
++ *
++ * linux/include/asm-arm/arch-sa1100/collie.h
++ * 
++ * This file contains the hardware specific definitions for Collie
++ *
++ * (C) Copyright 2001 Lineo Japan, Inc.
++ * 
++ * May be copied or modified under the terms of the GNU General Public
++ * License.  See linux/COPYING for more information.
++ * 
++ * ChangeLog:
++ *   04-06-2001 Lineo Japan, Inc.
++ *   04-16-2001 SHARP Corporation
++ *
++ *   Mar 10, 2004: Updates to 2.6 by John Lenz
++ */
++#ifndef __ASM_ARCH_CORGI_H
++#define __ASM_ARCH_CORGI_H  1
++
++/*
++ * LCDC internal I/O mappings
++ *
++ * We have the following mapping:
++ *      phys            virt
++ *      08000000        f1000000
++ */
++
++
++
++/*
++ * SCOOP internal I/O mappings
++ *
++ * We have the following mapping:
++ *      phys            virt
++ *      10800000        f2000000
++ */
++
++
++#define CF_BUF_CTRL_BASE 0xF2000000
++
++#define	CORGI_SCP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
++
++#define	CORGI_SCP_MCR  0x00
++#define	CORGI_SCP_CDR  0x04
++#define	CORGI_SCP_CSR  0x08
++#define	CORGI_SCP_CPR  0x0C
++#define	CORGI_SCP_CCR  0x10
++#define	CORGI_SCP_IRR  0x14
++#define	CORGI_SCP_IRM  0x14
++#define	CORGI_SCP_IMR  0x18
++#define	CORGI_SCP_ISR  0x1C
++#define	CORGI_SCP_GPCR 0x20
++#define	CORGI_SCP_GPWR 0x24
++#define	CORGI_SCP_GPRR 0x28
++#define	CORGI_SCP_REG_MCR	CORGI_SCP_REG(CORGI_SCP_MCR)
++#define	CORGI_SCP_REG_CDR	CORGI_SCP_REG(CORGI_SCP_CDR)
++#define	CORGI_SCP_REG_CSR	CORGI_SCP_REG(CORGI_SCP_CSR)
++#define	CORGI_SCP_REG_CPR	CORGI_SCP_REG(CORGI_SCP_CPR)
++#define	CORGI_SCP_REG_CCR	CORGI_SCP_REG(CORGI_SCP_CCR)
++#define	CORGI_SCP_REG_IRR	CORGI_SCP_REG(CORGI_SCP_IRR)
++#define	CORGI_SCP_REG_IRM	CORGI_SCP_REG(CORGI_SCP_IRM)
++#define	CORGI_SCP_REG_IMR	CORGI_SCP_REG(CORGI_SCP_IMR)
++#define	CORGI_SCP_REG_ISR	CORGI_SCP_REG(CORGI_SCP_ISR)
++#define	CORGI_SCP_REG_GPCR	CORGI_SCP_REG(CORGI_SCP_GPCR)
++#define	CORGI_SCP_REG_GPWR	CORGI_SCP_REG(CORGI_SCP_GPWR)
++#define	CORGI_SCP_REG_GPRR	CORGI_SCP_REG(CORGI_SCP_GPRR)
++
++#define CORGI_SCP_GPCR_PA22	( 1 << 12 )
++#define CORGI_SCP_GPCR_PA21	( 1 << 11 )
++#define CORGI_SCP_GPCR_PA20	( 1 << 10 )
++#define CORGI_SCP_GPCR_PA19	( 1 << 9 )
++#define CORGI_SCP_GPCR_PA18	( 1 << 8 )
++#define CORGI_SCP_GPCR_PA17	( 1 << 7 )
++#define CORGI_SCP_GPCR_PA16	( 1 << 6 )
++#define CORGI_SCP_GPCR_PA15	( 1 << 5 )
++#define CORGI_SCP_GPCR_PA14	( 1 << 4 )
++#define CORGI_SCP_GPCR_PA13	( 1 << 3 )
++#define CORGI_SCP_GPCR_PA12	( 1 << 2 )
++#define CORGI_SCP_GPCR_PA11	( 1 << 1 )
++
++
++/*
++ * GPIOs
++ */
++#define CORGI_SCP_LED_GREEN		CORGI_SCP_GPCR_PA11
++#define CORGI_SCP_SWA			CORGI_SCP_GPCR_PA12
++#define CORGI_SCP_SWB			CORGI_SCP_GPCR_PA13
++#define CORGI_SCP_MUTE_L		CORGI_SCP_GPCR_PA14
++#define CORGI_SCP_MUTE_R		CORGI_SCP_GPCR_PA15
++#define CORGI_SCP_AKIN_PULLUP		CORGI_SCP_GPCR_PA16
++#define CORGI_SCP_APM_ON		CORGI_SCP_GPCR_PA17
++#define CORGI_SCP_BACKLIGHT_CONT	CORGI_SCP_GPCR_PA18
++#define CORGI_SCP_MIC_BIAS		CORGI_SCP_GPCR_PA19
++
++
++#define CORGI_SCP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
++				  CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
++				  CORGI_SCP_MIC_BIAS )
++#define CORGI_SCP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
++#define CORGI_GPIO_CO		16
++
++
++/*
++ * Flash Memory mappings
++ *
++ * We have the following mapping:
++ *                      phys            virt
++ *      boot ROM        00000000        ef000000
++ *      NAND Flash      0C000000	f2100000
++ */
++#define NAND_FLASH_REG_BASE 0xf2100000
++#define CORGI_CPLD_REG(ofst) (*(volatile unsigned char*)(NAND_FLASH_REG_BASE+(ofst)))
++
++/* register offset */
++#define CORGI_ECCLPLB		0x00	/* line parity 7 - 0 bit */
++#define CORGI_ECCLPUB		0x04	/* line parity 15 - 8 bit */
++#define CORGI_ECCCP		0x08	/* column parity 5 - 0 bit */
++#define CORGI_ECCCNTR		0x0C	/* ECC byte counter */
++#define CORGI_ECCCLRR		0x10	/* cleare ECC */
++#define CORGI_FLASHIO		0x14	/* Flash I/O */
++#define CORGI_FLASHCTL		0x18	/* Flash Control */
++
++/* Flash control bit */
++#define CORGI_FLRYBY		(1 << 5)
++#define CORGI_FLCE1		(1 << 4)
++#define CORGI_FLWP		(1 << 3)
++#define CORGI_FLALE		(1 << 2)
++#define CORGI_FLCLE		(1 << 1)
++#define CORGI_FLCE0		(1 << 0)
++
++
++
++
++/*
++CORGI_ * LED
++ */
++#define CORGI_GPIO_LED_ORANGE		(13)
++//#define CORGI_SCP_LED_GREEN		CORGI_SCP_GPCR_PA11
++
++
++/*
++ * GPIOs
++ */
++/* PXA GPIOs */
++#define CORGI_GPIO_KEY_INT		(0)	/* key interrupt */
++#define CORGI_GPIO_AC_IN		(1)
++#define CORGI_GPIO_TP_INT		(5)	/* Touch Panel interrupt */
++#define CORGI_GPIO_WAKEUP		(3)
++#define CORGI_GPIO_IR_ON		(22)
++#define CORGI_GPIO_AK_INT		(4)	// Remote Controller
++#define CORGI_GPIO_HP_IN		GPIO_AK_INT
++#define CORGI_GPIO_CF_IRQ		(17)
++//#define CORGI_GPIO_CF_PRDY		(17)
++#define CORGI_GPIO_LED_ORANGE		(13)
++#define CORGI_GPIO_CF_CD		(14)
++#define CORGI_GPIO_SD_PWR		(33)
++#define CORGI_GPIO_nSD_CLK		(6)
++#define CORGI_GPIO_nSD_WP		(7)
++#define CORGI_GPIO_nSD_INT		(10)
++#define CORGI_GPIO_nSD_DETECT		(9)
++#define CORGI_GPIO_MAIN_BAT_LOW		(11)
++#define CORGI_GPIO_BAT_COVER		(11)
++#define CORGI_GPIO_ADC_TEMP_ON		(21)
++#define CORGI_GPIO_CHRG_ON		(38)
++#define CORGI_GPIO_CHRG_FULL		(16)
++#define CORGI_GPIO_USB_PULLUP		(45)
++#define CORGI_GPIO_HSYNC		(44)
++
++/* KeyBoard */
++#define CORGI_KEY_STROBE_NUM		(12)
++#define CORGI_KEY_SENSE_NUM		(8)
++#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
++#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
++#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
++#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
++#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
++#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
++#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
++#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
++#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
++#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
++#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
++
++
++/*
++ * Interrupts
++ */
++/* PXA GPIOs */
++#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
++#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
++#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
++#define CORGI_IRQ_GPIO_HP_IN		IRQ_GPIO_AK_INT
++#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
++#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
++#define CORGI_IRQ_GPIO_CO		IRQ_GPIO(16)
++#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
++#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
++#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
++#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
++#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
++#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))
++
++
++// CS
++#define CORGI_CS_MAX1111	1
++#define CORGI_CS_ADS7846	2
++#define CORGI_CS_LZ9JG18	3
++
++#endif /* __ASM_ARCH_CORGI_H  */
++
+diff -uNr linux-2.6.5-orig/include/asm-arm/thread_info.h linux-2.6.5/include/asm-arm/thread_info.h
+--- linux-2.6.5-orig/include/asm-arm/thread_info.h	2004-06-14 20:31:55.000000000 +0100
++++ linux-2.6.5/include/asm-arm/thread_info.h	2004-06-14 20:33:06.000000000 +0100
+@@ -108,8 +108,8 @@
+ #define TI_CPU		20
+ #define TI_CPU_DOMAIN	24
+ #define TI_CPU_SAVE	28
+-#define TI_USED_MATH	76
+-#define TI_FPSTATE	(TI_USED_MATH+16)
++#define TI_USED_CP	76
++#define TI_FPSTATE	(TI_USED_CP+16)
+ 
+ #endif
+ 
+diff -uNr linux-2.6.5-orig/include/linux/serial_core.h linux-2.6.5/include/linux/serial_core.h
+--- linux-2.6.5-orig/include/linux/serial_core.h	2004-06-14 20:31:56.000000000 +0100
++++ linux-2.6.5/include/linux/serial_core.h	2004-06-14 20:33:06.000000000 +0100
+@@ -38,7 +38,8 @@
+ #define PORT_16850	12
+ #define PORT_RSA	13
+ #define PORT_NS16550A	14
+-#define PORT_MAX_8250	14	/* max port ID */
++#define PORT_XSCALE	15
++#define PORT_MAX_8250	15	/* max port ID */
+ 
+ /*
+  * ARM specific type numbers.  These are not currently guaranteed
+diff -uNr linux-2.6.5-orig/include/linux/serial_reg.h linux-2.6.5/include/linux/serial_reg.h
+--- linux-2.6.5-orig/include/linux/serial_reg.h	2004-06-14 20:31:56.000000000 +0100
++++ linux-2.6.5/include/linux/serial_reg.h	2004-06-14 20:33:06.000000000 +0100
+@@ -141,7 +141,7 @@
+ #define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
+ 
+ /*
+- * The Intel PXA2xx chip defines those bits
++ * The Intel XScale on-chip UARTs define these bits
+  */
+ #define UART_IER_DMAE	0x80	/* DMA Requests Enable */
+ #define UART_IER_UUE	0x40	/* UART Unit Enable */
+diff -uNr linux-2.6.5-orig/arch/arm/boot/Makefile linux-2.6.5/arch/arm/boot/Makefile
+--- linux-2.6.5-orig/arch/arm/boot/Makefile	2004-04-04 04:36:18.000000000 +0100
++++ linux-2.6.5/arch/arm/boot/Makefile	2004-06-14 21:36:21.000000000 +0100
+@@ -69,6 +69,8 @@
+ ZBSSADDR	:= ALIGN(4)
+ endif
+ 
++OBJCOPYFLAGS_zImage := --pad-to `(arm-linux-readelf -l arch/arm/boot/compressed/vmlinux | grep LOAD | awk '{ print $$6 }')`
++
+ export	ZTEXTADDR ZBSSADDR ZRELADDR INITRD_PHYS PARAMS_PHYS
+ 
+ targets := Image zImage bootpImage
diff --git a/linux/openzaurus-2.6.10-rc1-jl1/poodle-config-2.6.7-jl2 b/linux/openzaurus-2.6.10-rc1-jl1/poodle-config-2.6.7-jl2
index e69de29bb2..dc773136f4 100644
--- a/linux/openzaurus-2.6.10-rc1-jl1/poodle-config-2.6.7-jl2
+++ b/linux/openzaurus-2.6.10-rc1-jl1/poodle-config-2.6.7-jl2
@@ -0,0 +1,708 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE_PB is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_MACH_POODLE=y
+CONFIG_SHARP_LOCOMO=y
+CONFIG_PXA25x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_MINICACHE=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# General setup
+#
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Generic Driver Options
+#
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PM=y
+CONFIG_PREEMPT=y
+CONFIG_APM=y
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2"
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB7312 is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_NETDEVICES is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_LOCOMO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_ISA=m
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+# CONFIG_JFFS2_FS_NAND is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_EXPORTFS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# Misc devices
+#
+
+#
+# USB support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_SA1100 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y