Merge oe-devel@oe-devel.bkbits.net:openembedded

into hyperion.kergoth.com:/home/kergoth/code/openembedded

2004/12/09 03:39:39-06:00 kergoth.com!kergoth
Break people's builds again.. this time moving the packages into a packages/ subdir to clean things up a bit.

BKrev: 41b81f3dvlp3rU7_8MUXLcI8LDdDoA

4 files changed, 0 insertions, 229 deletions

diff --git a/libmikmod/libmikmod/autofoo.patch b/libmikmod/libmikmod/autofoo.patch
deleted file mode 100644
index 22d8170aa8..0000000000
--- a/libmikmod/libmikmod/autofoo.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- libmikmod-3.2.0-beta2/configure.in~autofoo
-+++ libmikmod-3.2.0-beta2/configure.in
-@@ -415,8 +415,6 @@
- 
- AC_CHECK_FUNCS(setenv snprintf srandom)
- AC_REPLACE_FUNCS(strcasecmp strdup strstr)
--# Change extension, as we use libtool
--LIBOBJS="`echo $LIBOBJS|sed -e 's/\.o/\.lo/g'`"
- 
- AC_HEADER_EGREP(srandom,math.h,AC_DEFINE(SRANDOM_IN_MATH_H))
- 
diff --git a/libmikmod/libmikmod/m4.patch b/libmikmod/libmikmod/m4.patch
deleted file mode 100644
index 854fc22b90..0000000000
--- a/libmikmod/libmikmod/m4.patch
+++ /dev/null
@@ -1,213 +0,0 @@
---- libmikmod-3.2.0-beta2/libmikmod.m4.orig	2004-01-21 02:36:34 +0100
-+++ libmikmod-3.2.0-beta2/libmikmod.m4	2004-08-12 11:28:30 +0200
-@@ -8,7 +8,7 @@
- dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and
- dnl LIBMIKMOD_LDADD
- dnl
--AC_DEFUN(AM_PATH_LIBMIKMOD,
-+AC_DEFUN([AM_PATH_LIBMIKMOD],
- [dnl 
- dnl Get the cflags and libraries from the libmikmod-config script
- dnl
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- /dev/null
-+++ libmikmod-3.2.0-beta2/m4/esd.m4
-@@ -0,0 +1,194 @@
-+# Configure paths for ESD
-+# Manish Singh    98-9-30
-+# stolen back from Frank Belew
-+# stolen from Manish Singh
-+# Shamelessly stolen from Owen Taylor
-+
-+dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-+dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
-+dnl
-+AC_DEFUN(AM_PATH_ESD,
-+[dnl 
-+dnl Get the cflags and libraries from the esd-config script
-+dnl
-+AC_ARG_WITH(esd-prefix,[  --with-esd-prefix=PFX   Prefix where ESD is installed (optional)],
-+            esd_prefix="$withval", esd_prefix="")
-+AC_ARG_WITH(esd-exec-prefix,[  --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
-+            esd_exec_prefix="$withval", esd_exec_prefix="")
-+AC_ARG_ENABLE(esdtest, [  --disable-esdtest       Do not try to compile and run a test ESD program],
-+		    , enable_esdtest=yes)
-+
-+  if test x$esd_exec_prefix != x ; then
-+     esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
-+     if test x${ESD_CONFIG+set} != xset ; then
-+        ESD_CONFIG=$esd_exec_prefix/bin/esd-config
-+     fi
-+  fi
-+  if test x$esd_prefix != x ; then
-+     esd_args="$esd_args --prefix=$esd_prefix"
-+     if test x${ESD_CONFIG+set} != xset ; then
-+        ESD_CONFIG=$esd_prefix/bin/esd-config
-+     fi
-+  fi
-+
-+  AC_PATH_PROG(ESD_CONFIG, esd-config, no)
-+  min_esd_version=ifelse([$1], ,0.2.7,$1)
-+  AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
-+  no_esd=""
-+  if test "$ESD_CONFIG" = "no" ; then
-+    no_esd=yes
-+  else
-+    AC_LANG_SAVE
-+    AC_LANG_C
-+    ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
-+    ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`
-+
-+    esd_major_version=`$ESD_CONFIG $esd_args --version | \
-+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-+    esd_minor_version=`$ESD_CONFIG $esd_args --version | \
-+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-+    esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
-+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-+    if test "x$enable_esdtest" = "xyes" ; then
-+      ac_save_CFLAGS="$CFLAGS"
-+      ac_save_LIBS="$LIBS"
-+      CFLAGS="$CFLAGS $ESD_CFLAGS"
-+      LIBS="$LIBS $ESD_LIBS"
-+dnl
-+dnl Now check if the installed ESD is sufficiently new. (Also sanity
-+dnl checks the results of esd-config to some extent
-+dnl
-+      rm -f conf.esdtest
-+      AC_TRY_RUN([
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <esd.h>
-+
-+char*
-+my_strdup (char *str)
-+{
-+  char *new_str;
-+  
-+  if (str)
-+    {
-+      new_str = malloc ((strlen (str) + 1) * sizeof(char));
-+      strcpy (new_str, str);
-+    }
-+  else
-+    new_str = NULL;
-+  
-+  return new_str;
-+}
-+
-+int main ()
-+{
-+  int major, minor, micro;
-+  char *tmp_version;
-+
-+  system ("touch conf.esdtest");
-+
-+  /* HP/UX 9 (%@#!) writes to sscanf strings */
-+  tmp_version = my_strdup("$min_esd_version");
-+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-+     printf("%s, bad version string\n", "$min_esd_version");
-+     exit(1);
-+   }
-+
-+   if (($esd_major_version > major) ||
-+      (($esd_major_version == major) && ($esd_minor_version > minor)) ||
-+      (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
-+    {
-+      return 0;
-+    }
-+  else
-+    {
-+      printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
-+      printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
-+      printf("*** best to upgrade to the required version.\n");
-+      printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
-+      printf("*** to point to the correct copy of esd-config, and remove the file\n");
-+      printf("*** config.cache before re-running configure\n");
-+      return 1;
-+    }
-+}
-+
-+],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-+       CFLAGS="$ac_save_CFLAGS"
-+       LIBS="$ac_save_LIBS"
-+       AC_LANG_RESTORE
-+     fi
-+  fi
-+  if test "x$no_esd" = x ; then
-+     AC_MSG_RESULT(yes)
-+     ifelse([$2], , :, [$2])     
-+  else
-+     AC_MSG_RESULT(no)
-+     if test "$ESD_CONFIG" = "no" ; then
-+       echo "*** The esd-config script installed by ESD could not be found"
-+       echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
-+       echo "*** your path, or set the ESD_CONFIG environment variable to the"
-+       echo "*** full path to esd-config."
-+     else
-+       if test -f conf.esdtest ; then
-+        :
-+       else
-+          echo "*** Could not run ESD test program, checking why..."
-+          CFLAGS="$CFLAGS $ESD_CFLAGS"
-+          LIBS="$LIBS $ESD_LIBS"
-+          AC_LANG_SAVE
-+          AC_LANG_C
-+          AC_TRY_LINK([
-+#include <stdio.h>
-+#include <esd.h>
-+],      [ return 0; ],
-+        [ echo "*** The test program compiled, but did not run. This usually means"
-+          echo "*** that the run-time linker is not finding ESD or finding the wrong"
-+          echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
-+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-+          echo "*** is required on your system"
-+	  echo "***"
-+          echo "*** If you have an old version installed, it is best to remove it, although"
-+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-+          echo "*** exact error that occured. This usually means ESD was incorrectly installed"
-+          echo "*** or that you have moved ESD since it was installed. In the latter case, you"
-+          echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
-+          CFLAGS="$ac_save_CFLAGS"
-+          LIBS="$ac_save_LIBS"
-+          AC_LANG_RESTORE
-+       fi
-+     fi
-+     ESD_CFLAGS=""
-+     ESD_LIBS=""
-+     ifelse([$3], , :, [$3])
-+  fi
-+  AC_SUBST(ESD_CFLAGS)
-+  AC_SUBST(ESD_LIBS)
-+  rm -f conf.esdtest
-+])
-+
-+dnl AM_ESD_SUPPORTS_MULTIPLE_RECORD([ACTION-IF-SUPPORTS [, ACTION-IF-NOT-SUPPORTS]])
-+dnl Test, whether esd supports multiple recording clients (version >=0.2.21)
-+dnl
-+AC_DEFUN(AM_ESD_SUPPORTS_MULTIPLE_RECORD,
-+[dnl
-+  AC_MSG_NOTICE([whether installed esd version supports multiple recording clients])
-+  ac_save_ESD_CFLAGS="$ESD_CFLAGS"
-+  ac_save_ESD_LIBS="$ESD_LIBS"
-+  AM_PATH_ESD(0.2.21,
-+    ifelse([$1], , [
-+      AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, true)
-+      AC_DEFINE(ESD_SUPPORTS_MULTIPLE_RECORD, 1,
-+	[Define if you have esound with support of multiple recording clients.])],
-+    [$1]),
-+    ifelse([$2], , [AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, false)], [$2])
-+    if test "x$ac_save_ESD_CFLAGS" != x ; then
-+       ESD_CFLAGS="$ac_save_ESD_CFLAGS"
-+    fi
-+    if test "x$ac_save_ESD_LIBS" != x ; then
-+       ESD_LIBS="$ac_save_ESD_LIBS"
-+    fi
-+  )
-+])
diff --git a/libmikmod/libmikmod_3.1.11.bb b/libmikmod/libmikmod_3.1.11.bb
deleted file mode 100644
index e69de29bb2..0000000000
--- a/libmikmod/libmikmod_3.1.11.bb
+++ /dev/null
diff --git a/libmikmod/libmikmod_3.2.0-beta2.bb b/libmikmod/libmikmod_3.2.0-beta2.bb
deleted file mode 100644
index e69de29bb2..0000000000
--- a/libmikmod/libmikmod_3.2.0-beta2.bb
+++ /dev/null