slugos: Major build structure change - subsumed openslug and debianslug into a single slugos distribution which works with either nslu2be or nslu2le machines. Kept the openslug and debianslug conf files around to enable people to migrate smoothly, but eventually they will disappear.

1 files changed, 110 insertions, 0 deletions

diff --git a/conf/distro/slugos.conf b/conf/distro/slugos.conf
new file mode 100644
index 0000000000..32b047aeae
--- /dev/null
+++ b/conf/distro/slugos.conf
@@ -0,0 +1,110 @@
+#@TYPE: Distribution
+#@NAME: SlugOS
+#@DESCRIPTION: SlugOS Linux Distribution for the NSLU2
+
+#----------------------------------------------------------------------------------
+# STANDARD SlugOS/BE DEFINITIONS
+#----------------------------------------------------------------------------------
+DISTRO_NAME = "SlugOS"
+# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
+# DISTRO_FEED = "unstable"
+DISTRO_TYPE = "beta"
+TARGET_ARCH ?= "armeb"
+ARM_INSTRUCTION_SET = "arm"
+TARGET_OS = "linux"
+
+#----------------------------------------------------------------------------------
+# FIRMWARE CONFIGURATION
+#----------------------------------------------------------------------------------
+# EXTRA PACKAGES
+# --------------
+# Filesystem support modules are listed in here for easy removal,
+# as is the lrzsz serial package and other kernel modules which are
+# not absolutely required for boot.
+# NOTE: only jffs2 support is an absolute requirement of boot, even
+# the ext2/ext3 support is optional!
+SLUGOS_EXT2_PROGS =  "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks"
+
+# The standard firmware contents and additional packages built as requirements
+# of the firmware are defined here in SLUGOS_STANDARD_RDEPENDS.
+SLUGOS_STANDARD_RDEPENDS = ""
+
+# Support for a variety of file systems is built in to the slugos
+# image, programs to format disks with these file systems may be
+# added or removed.  By default ext2 and ext3 support
+# is included by the following lines.
+# 
+# These lines add support for formatting ext2 and ext3 file systems
+# on a hard disk attached to the NSLU2.  ext3 is the standard Linux
+# file system.
+SLUGOS_STANDARD_RDEPENDS += "${SLUGOS_EXT2_PROGS}"
+
+# These lines add support for an X/Y/ZModem package called lrzsz
+# (this is of use for people with modified NSLU2 hardware which
+# supports a serial port.)
+SLUGOS_STANDARD_RDEPENDS += "lrzsz"
+
+# Filesystem selection.  Adding entries here adds the module to the
+# image.  The module must be built as part of nslu2-kernel (i.e. it
+# must be specified as a module in the defconfig file).  The NLS
+# support charset modules must be given explicitly and must match
+# the codepage/iocharset and NLS handling for the file systems which
+# require them.  The installed lanugage set is minimal but sufficient
+# for any file system (since it uses utf8).  See
+# http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems
+# for more information on the language behaviour of the DOS file
+# systems.
+#
+# KERNEL LEVEL FILE SYSTEM SUPPORT
+# --------------------------------
+# NOTE: removing kernel-module-nfs from this list will prevent NFS
+# boot (however you can do a simple flash file system boot - no
+# attached disk - and install the nfs modules from ssh.)
+SLUGOS_STANDARD_RDEPENDS += "\
+kernel-module-ext2 \
+kernel-module-jbd \
+kernel-module-ext3 \
+kernel-module-vfat \
+kernel-module-ntfs \
+kernel-module-isofs \
+kernel-module-udf \
+kernel-module-nls-cp437 \
+kernel-module-nls-utf8 \
+"
+
+# Add daemon required for HW RNG support
+SLUGOS_STANDARD_RDEPENDS += "\
+rng-tools \
+"
+
+# Add modules required for usb support
+SLUGOS_STANDARD_RDEPENDS += "\
+kernel-module-ohci-hcd \
+kernel-module-uhci-hcd \
+"
+
+# Add modules required for IDE support
+SLUGOS_STANDARD_RDEPENDS += "\
+kernel-module-libata \
+kernel-module-pata-artop \
+"
+
+# Add modules required for Network support
+SLUGOS_STANDARD_RDEPENDS += "\
+kernel-module-via-velocity \
+"
+
+# This documents other file systems which are built but not installed
+# by default in the flash image.
+#
+# kernel-module-msdos - mounts a FAT file system without long file names
+#                       (use kernel-module-vfat, it shows the long names
+#                       if present.)
+
+# The 'standard' values are the defaults for the 'extra' packages added
+# to the firmware image.  None of these things are requirements to have
+# a bootable, useable, system however they *are* expected to be present
+# in SlugOS.
+SLUGOS_EXTRA_RDEPENDS = "${SLUGOS_STANDARD_RDEPENDS}"
+
+require conf/distro/include/slugos.inc