distro configurations: rename include files to *.inc and adjust those which include it accordingly

1 files changed, 0 insertions, 195 deletions

diff --git a/conf/distro/include/slugos.conf b/conf/distro/include/slugos.conf
deleted file mode 100644
index c2b169106f..0000000000
--- a/conf/distro/include/slugos.conf
+++ /dev/null
@@ -1,195 +0,0 @@
-#@TYPE: Distribution
-#@NAME: SlugOS
-#@DESCRIPTION: SlugOS Linux Distribution for the NSLU2
-
-# WARNING: this file should not be used directly, use one of
-# the supported slugos-???.conf instead:
-
-# Explanation of the naming
-#
-# slugos-dist - the base distro configuration for an NSLU2
-# slugos-[bl][at][gu] - a specific configuration encoded as follows:
-#
-#  b or l - big or little endian
-#         set ARCH_BYTE_SEX to match
-#
-#  a or t - ARM or Thumb instructions in the low level libraries
-#         set ARM_INSTRUCTION_SET to match
-#
-#  g or u - glibc or uclibc libc implementation
-#         set TARGET_OS to match
-#
-# The following names are deprecated:
-#
-# openslug - the historical name of a canonical slugos-bag distro
-#            also the name of a standard slugos-bag distro with a package feed
-# ucslugc  - the historical (and obsolete) name of slugos-btu
-#            also the name of a standard slugos-btu distro with a package feed
-#
-
-#----------------------------------------------------------------------------------
-# STANDARD SLUGOS DEFINITIONS
-#----------------------------------------------------------------------------------
-# The following must be set in the top level distro file:
-#
-#DISTRO_NAME
-#DISTRO_TYPE
-
-# The following may be overridden to make sub-versions
-SLUGOS_VERSION = "4.0"
-DISTRO_REVISION ?= ""
-DISTRO_VERSION ?= "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
-# For release (only):
-# DISTRO_FEED ?= "${SLUGOS_VERSION}-${DISTRO_TYPE}"
-DISTRO_FEED ?= "unstable"
-
-# The following must also be set, they define the basic format of the build
-#
-#ARCH_BYTE_SEX "be" or "le"
-#ARM_INSTRUCTION_SET "arm" or "thumb"
-#TARGET_OS "linux" or "linux-uclibc"
-#SLUGOS_IMAGESEX "big-endian" or "little-endian" (JFFS2 format)
-
-# The following need not be set, the defaults should be adequate
-#USE_NLS = "no" or "yes"
-USE_NLS ?= "no"
-
-# To make errors easier to identify:
-DISTRO_NAME ?= "INVALID-${ARCH_BYTE_SEX}-${ARM_INSTRUCTION_SET}-${TARGET_OS}"
-DISTRO_TYPE ?= "INVALID"
-
-# The following must not be changed.
-TARGET_FPU = "soft"
-
-# glib-2.0 builds require USE_NLS to be overridden
-USE_NLS_glib-2.0 = "yes"
-
-INHERIT += "package_ipk debian"
-
-DISTRO_BASE = ":slugos"
-
-# packages/meta/slugos-image.bb generates a binary image of the root file system
-# with a name controlled by the following setting - it defaults to the top level
-# ${DISTRO_NAME} and this should always be correct, but it may be too specific (e.g.
-# if you change the DISTRO from one of the standard ones in a way which does not
-# change the generated image).
-SLUGOS_IMAGENAME ?= "${DISTRO_NAME}"
-
-# pull in the frozen list of bbfiles - this sets BBFILES and this will override any
-# setting in local.conf  Since this depends on ${DISTRO} it doesn't actually do
-# anything by default unless conf/distro/${DISTRO}-packages.conf exists.
-# require conf/distro/include/freeze.conf
-
-#----------------------------------------------------------------------------------
-# FEEDS
-#  The FEED_URIS lines define where on the internet SlugOS looks for packages
-#  when downloading new packages or updating existing packages.  Additional feeds
-#  (such as a local feed) can be defined in local.conf
-#----------------------------------------------------------------------------------
-# Add to the user's feeds from local.conf (there may be none).
-# In general slugos-[bl][at][gu] is sufficient to identify a set of packages which
-# will work on any derived distro.  The slugos-???.conf files set the FEED_URIS to
-# an appropriate ipkg.nslu2-linux.org default if nslu2-linux is actually building
-# such a feed:
-#
-#FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/cross/${DISTRO_FEED}"
-#FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/native/${DISTRO_FEED}"
-#
-# When such a feed exists the corresponding 'unstable' feed will normally also
-# exist - the packages in unstable are the latest but very unlikely to be the
-# greatest.  Use at your own risk!
-# 
-#FEED_URIS_append += "unstable_cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/cross/unstable"
-#FEED_URIS_append += "unstable_native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/native/unstable"
-
-#----------------------------------------------------------------------------------
-# FIRMWARE CONFIGURATION
-#----------------------------------------------------------------------------------
-# IMAGE BUILD OPTIONS
-# -------------------
-# CMDLINE* macros define the kernel command line.  CMDLINE_DEBUG is provided
-# to enable/disable debugging in the distro.  Here noirqdebug is used to
-# remove the messages about unhandled interrupts - people debugging interrupt
-# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf)
-CMDLINE_DEBUG = "noirqdebug"
-
-# Building a full image.  If you set SLUGOS_FLASH_IMAGE to "yes" a complete
-# 8MByte flash image will be built after the rootfs JFFS2 image.
-#
-# If you do this you will need to find a source for the LinkSys software to be
-# placed in the full image - 'RedBoot' (the boot loader), 'Trailer' (just a bunch
-# of bytes to flag the image as valid) and 'SysConf' (actually just a block of
-# unset data - you could modify this to pre-configure the SysConf partition of the
-# image).  If you own an NSLU2 then this data is already in the flash of the NSLU2
-# and you can download it (including new versions) from the LinkSys web site - see
-# packages/meta/slugos-image.bb for information about where to put the downloaded
-# data.
-SLUGOS_FLASH_IMAGE ?= "no"
-
-# EXTRA PACKAGES
-# --------------
-# SlugOS builds an image with no extra packages - to add packages to the
-# firmware include this file in a new 'distro' configuration file) and set
-# the definition below to include the requirements.
-# NOTE: as built this system will *not* be able to boot off anything other than
-# the flash file system ('turnup' will not work).  You need to add the filesystem
-# modules for your chosen root file system (and any others which will be used).
-# See openslug.conf for a more full-featured system!
-#
-# Everything in this list gets added to the flash image, along with any RDEPENDS
-# it has itself!
-SLUGOS_EXTRA_RDEPENDS ?= ""
-
-#----------------------------------------------------------------------------------
-# PACKAGE VERSION CONTROL
-#----------------------------------------------------------------------------------
-# Define how to bootstrap the system - we need cross compilers.  It is also
-# necessary to define which gets generated first, glibc or the kernel, and
-# this is done by selecting the provider of libc (in this case it needs the
-# kernel, so there has to be a non-libc gcc to build the kernel!)
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}g++:gcc-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-# Select 2.6 versions of the depmod support
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-
-# compiler/binary/library versions (unslung uses different ones so these
-# cannot be in ${MACHINE}.conf)
-PREFERRED_VERSION_binutils ?= "2.16"
-PREFERRED_VERSION_binutils-cross ?= "2.16"
-PREFERRED_VERSION_gcc-cross-initial ?= "4.1.1"
-PREFERRED_VERSION_gcc-cross ?= "4.1.1"
-PREFERRED_VERSION_gcc ?= "4.1.1"
-PREFERRED_VERSION_glibc ?= "2.3.5+cvs20050627"
-#For SVN uclibc:
-#SRCDATE_uclibc ?= "20060120"
-#PREFERRED_VERSION_uclibc ?= "0.9.28+svn${SRCDATE_uclibc}"
-
-# Select the correct versions of the kernel and modules (these are the
-# defaults, override in the conf/distro top-level distro file).
-PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel"
-PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.17"
-
-# Built-in ethernet modules
-PREFERRED_PROVIDER_virtual/ixp-eth ?= "ixp400-eth"
-PREFERRED_VERSION_ixp4xx-csr ?= "2.1"
-PREFERRED_VERSION_ixp-osal ?= "2.1"
-PREFERRED_VERSION_ixp400-eth ?= "1.5"
-
-# Select the smallest provider of x11 libraries
-PREFERRED_PROVIDER_libx11 ?= "diet-x11"
-SRCDATE_diet-x11 ?= "20060106"
-
-# Latest wpa-supplicant which supports madwifi-ng
-PREFERRED_VERSION_wpa-supplicant ?= "0.5.1"
-
-# Ensure consistency across all SlugOS builds for the provider of a
-# relational database - use the latest version of the SleepyCat
-# Berkeley database
-PREFERRED_PROVIDER_virtual/db = "db"
-PREFERRED_PROVIDER_virtual/db-native = "db-native"
-
-#FIXME: HACK: REMOVE THIS
-IGNORE_STRIP_ERRORS = ""