summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRoger Monk <r-monk@ti.com>2010-09-16 11:17:01 +0100
committerKoen Kooi <koen@openembedded.org>2010-09-16 12:34:37 +0200
commit425cbaa958dddf22254258a765198557f4ecde5a (patch)
tree2cea02940133ae4f02af62e5270f1de2a725df82
parent37ac17279e45eeb238d688b68251de8121283490 (diff)
linux-omap-psp: Add latest pending kernel patches
* Fixes for 1GHz operation * EHCI * Build * DSS * Bump Kernel PR Signed-off-by: Roger Monk <r-monk@ti.com> Signed-off-by: Koen Kooi <k-kooi@ti.com>
-rw-r--r--conf/machine/include/omap3.inc2
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0001-OMAP3-SDRC-add-100MHz-timing-data-for-Hynix-H8KDS0.patch39
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0002-omap3-Fix-voltage-and-frequency-scaling-order-when.patch152
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0003-OMAP3-PM-Introduce-Smartreflex-support-on-OMAP3630.patch362
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0004-OMAP3630-PM-implement-Foward-Body-Bias-for-OPP1G.patch243
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0005-Revert-Revert-OMAP-DSS2-FIFI-UNDERFLOW-issue-fix.patch198
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0006-modules-Skip-empty-sections-when-exporting-section.patch84
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0007-RTC-s35390a-Bug-Fix-Pie-mode-doesn-t-work.patch68
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0008-OMAP3EVM-Set-minimum-throughput-requirement-for-DSS.patch71
-rw-r--r--recipes/linux/linux-omap-psp-2.6.32/pending/0009-ehci-fix-device-detect-issue-with-modules.patch159
-rw-r--r--recipes/linux/linux-omap-psp_2.6.32.bb9
11 files changed, 1386 insertions, 1 deletions
diff --git a/conf/machine/include/omap3.inc b/conf/machine/include/omap3.inc
index 60ec0ff42a..193e31e8f9 100644
--- a/conf/machine/include/omap3.inc
+++ b/conf/machine/include/omap3.inc
@@ -3,7 +3,7 @@ SOC_FAMILY = "omap3"
require conf/machine/include/tune-cortexa8.inc
PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r89"
+MACHINE_KERNEL_PR = "r90"
KERNEL_IMAGETYPE = "uImage"
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0001-OMAP3-SDRC-add-100MHz-timing-data-for-Hynix-H8KDS0.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0001-OMAP3-SDRC-add-100MHz-timing-data-for-Hynix-H8KDS0.patch
new file mode 100644
index 0000000000..4f37f603a7
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0001-OMAP3-SDRC-add-100MHz-timing-data-for-Hynix-H8KDS0.patch
@@ -0,0 +1,39 @@
+From 908b7949544571e9acc1fe0cce918f6e338926c9 Mon Sep 17 00:00:00 2001
+From: Ranjith Lohithakshan <ranjithl@ti.com>
+Date: Fri, 28 May 2010 15:13:18 +0530
+Subject: [PATCH 1/9] OMAP3: SDRC: add 100MHz timing data for Hynix H8KDS0UN0MER-4EM
+
+Also, the refresh control value used at 200MHz was incorrect. Fixed
+that as well.
+
+Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
+---
+ arch/arm/mach-omap2/sdram-hynix-h8kds0un0mer-4em.h | 9 ++++++++-
+ 1 files changed, 8 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/sdram-hynix-h8kds0un0mer-4em.h b/arch/arm/mach-omap2/sdram-hynix-h8kds0un0mer-4em.h
+index 06433e6..c147586 100644
+--- a/arch/arm/mach-omap2/sdram-hynix-h8kds0un0mer-4em.h
++++ b/arch/arm/mach-omap2/sdram-hynix-h8kds0un0mer-4em.h
+@@ -19,10 +19,17 @@ static struct omap_sdrc_params h8kds0un0mer4em_sdrc_params[] = {
+ .rate = 200000000,
+ .actim_ctrla = 0x92e1c4c6,
+ .actim_ctrlb = 0x0002111c,
+- .rfr_ctrl = 0x0004dc01,
++ .rfr_ctrl = 0x0005e601,
+ .mr = 0x00000032,
+ },
+ [1] = {
++ .rate = 100000000,
++ .actim_ctrla = 0x49912283,
++ .actim_ctrlb = 0x0002110e,
++ .rfr_ctrl = 0x0002da01,
++ .mr = 0x00000032,
++ },
++ [2] = {
+ .rate = 0
+ },
+ };
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0002-omap3-Fix-voltage-and-frequency-scaling-order-when.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0002-omap3-Fix-voltage-and-frequency-scaling-order-when.patch
new file mode 100644
index 0000000000..bd16d29aaf
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0002-omap3-Fix-voltage-and-frequency-scaling-order-when.patch
@@ -0,0 +1,152 @@
+From d247a112a9ffbad1057a2c8bede5727940ac2045 Mon Sep 17 00:00:00 2001
+From: Ranjith Lohithakshan <ranjithl@ti.com>
+Date: Fri, 28 May 2010 15:20:32 +0530
+Subject: [PATCH 2/9] omap3: Fix voltage and frequency scaling order when changing OPP via mpurate
+
+When lowering an OPP via mpurate from what is being set by bootloader,
+the frequency need to be lowered before voltage is ramped down. The
+current code was not taking this into consideration and was always
+adjusting the voltage before the frequency adjustments.
+
+This was leading to crashes on 3730 when mpurate was set to 300MHz
+because the voltage was lowered before the frequency.
+
+This patch fixes these issues by tracking the direction of OPP change
+and doing the voltage and frequency change in the right order.
+
+Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
+---
+ arch/arm/mach-omap2/clock34xx.c | 51 +++++++++++++++++++++++-------------
+ arch/arm/mach-omap2/smartreflex.c | 11 +++++---
+ 2 files changed, 39 insertions(+), 23 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
+index 2bb7182..dd408eb 100644
+--- a/arch/arm/mach-omap2/clock34xx.c
++++ b/arch/arm/mach-omap2/clock34xx.c
+@@ -65,6 +65,7 @@ struct clk *sdrc_ick_p, *arm_fck_p;
+ */
+ unsigned int vdd1_opp = 0;
+ unsigned int vdd2_opp = 0;
++bool vdd_scale_down = false;
+
+ /**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+@@ -429,6 +430,24 @@ static void __init omap2_clk_iva_init_to_idle(void)
+
+ }
+
++static u16 get_opp(struct omap_opp *opp_freq_table,
++ unsigned long freq)
++{
++ struct omap_opp *prcm_config;
++
++ prcm_config = opp_freq_table;
++
++ if (prcm_config->rate <= freq)
++ return prcm_config->opp_id; /* Return the Highest OPP */
++ for (; prcm_config->rate; prcm_config--)
++ if (prcm_config->rate < freq)
++ return (prcm_config+1)->opp_id;
++ else if (prcm_config->rate == freq)
++ return prcm_config->opp_id;
++ /* Return the least OPP */
++ return (prcm_config+1)->opp_id;
++}
++
+ /* REVISIT: Move this init stuff out into clock.c */
+
+ /*
+@@ -444,8 +463,10 @@ static void __init omap2_clk_iva_init_to_idle(void)
+ */
+ static int __init omap2_clk_arch_init(void)
+ {
+- struct omap_opp *opp_table;
+- short valid=0, err=0, i;
++ short err=0;
++ u16 current_vdd1_opp;
++ struct clk *arm_fck;
++ unsigned long current_mpu_rate;
+
+ if (!mpurate)
+ return -EINVAL;
+@@ -463,6 +484,10 @@ static int __init omap2_clk_arch_init(void)
+ if (WARN((!l3_opps), "OPP table not defined for L3\n"))
+ err = 1;
+
++ arm_fck = clk_get(NULL, "arm_fck");
++ if (WARN(IS_ERR(arm_fck), "Failed to get arm_fck.\n"))
++ err = 1;
++
+ if (err)
+ return -ENOENT;
+
+@@ -475,24 +500,12 @@ static int __init omap2_clk_arch_init(void)
+ pr_err("This silicon doesn't support 720MHz\n");
+ }
+
+- /*
+- * Select VDD1 OPP corresponding to mpurate
+- */
+- opp_table = mpu_opps;
+-
+- for (i = 1; opp_table[i].opp_id <= get_max_vdd1(); i++) {
+- if (opp_table[i].rate == mpurate) {
+- valid = 1;
+- break;
+- }
+- }
++ current_mpu_rate = clk_get_rate(arm_fck);
++ current_vdd1_opp = get_opp(mpu_opps + get_max_vdd1(), current_mpu_rate);
++ vdd1_opp = get_opp(mpu_opps + get_max_vdd1(), mpurate);
+
+- if (valid) {
+- vdd1_opp = opp_table[i].opp_id;
+- } else {
+- pr_err("Invalid MPU rate (%u)\n", mpurate);
+- return -EINVAL;
+- }
++ if (vdd1_opp < current_vdd1_opp)
++ vdd_scale_down = true;
+
+ /*
+ * Match lowest OPP setting for VDD1 with lowest OPP for VDD2 as well.
+diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
+index 3b6ddf8..fd34af2 100644
+--- a/arch/arm/mach-omap2/smartreflex.c
++++ b/arch/arm/mach-omap2/smartreflex.c
+@@ -48,6 +48,7 @@
+ */
+ extern unsigned int vdd1_opp;
+ extern unsigned int vdd2_opp;
++extern bool vdd_scale_down;
+
+ extern int __init omap2_clk_set_freq(void);
+
+@@ -1082,6 +1083,10 @@ static int __init omap3_sr_init(void)
+ sr_set_clk_length(&sr1);
+ sr_set_clk_length(&sr2);
+
++ /* For OPP scale down, scale down frequency before voltage */
++ if (cpu_is_omap34xx() && vdd_scale_down)
++ omap2_clk_set_freq();
++
+ /* Call the VPConfig, VCConfig, set N Values. */
+ sr_set_nvalues(&sr1);
+ sr_configure_vp(SR1);
+@@ -1089,10 +1094,8 @@ static int __init omap3_sr_init(void)
+ sr_set_nvalues(&sr2);
+ sr_configure_vp(SR2);
+
+- /*
+- * With voltages matching target OPP, set corresponding frequency.
+- */
+- if (cpu_is_omap34xx())
++ /* For OPP scale up, scale up the frequency after voltage */
++ if (cpu_is_omap34xx() && !vdd_scale_down)
+ omap2_clk_set_freq();
+
+ ret = sysfs_create_file(power_kobj, &sr_vdd1_autocomp.attr);
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0003-OMAP3-PM-Introduce-Smartreflex-support-on-OMAP3630.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0003-OMAP3-PM-Introduce-Smartreflex-support-on-OMAP3630.patch
new file mode 100644
index 0000000000..020d012bd6
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0003-OMAP3-PM-Introduce-Smartreflex-support-on-OMAP3630.patch
@@ -0,0 +1,362 @@
+From bf679a27766de623815d820431e1049326f7cac1 Mon Sep 17 00:00:00 2001
+From: Ranjith Lohithakshan <ranjithl@ti.com>
+Date: Fri, 9 Jul 2010 15:55:41 +0530
+Subject: [PATCH 3/9] OMAP3: PM: Introduce Smartreflex support on OMAP3630/DM3730
+
+OMAP3630 has a newer version of Smartreflex IP called Smartreflex2. There are
+new register additions and bit definition differences in this version of the IP.
+This patch introduces the Class3 driver support for Smartreflex2 on OMAP3630.
+
+Smartreflex2 has the following registers added
+IRQ_EOI, IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR
+
+And following register offsets are different from Smartreflex1
+SENERROR, ERRCONFIG
+
+Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
+---
+ arch/arm/mach-omap2/smartreflex.c | 190 +++++++++++++++++++----------
+ arch/arm/mach-omap2/smartreflex.h | 16 +++
+ arch/arm/plat-omap/include/plat/control.h | 13 ++
+ 3 files changed, 157 insertions(+), 62 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
+index fd34af2..fdd9540 100644
+--- a/arch/arm/mach-omap2/smartreflex.c
++++ b/arch/arm/mach-omap2/smartreflex.c
+@@ -99,18 +99,26 @@ static int sr_clk_enable(struct omap_sr *sr)
+ return -1;
+ }
+
+- /* set fclk- active , iclk- idle */
+- sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK,
+- SR_CLKACTIVITY_IOFF_FON);
++ if (cpu_is_omap3630())
++ sr_modify_reg(sr, ERRCONFIG_36XX, SR_IDLEMODE_MASK,
++ SR_SMART_IDLE);
++ else
++ /* set fclk- active , iclk- idle */
++ sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK,
++ SR_CLKACTIVITY_IOFF_FON);
+
+ return 0;
+ }
+
+ static void sr_clk_disable(struct omap_sr *sr)
+ {
+- /* set fclk, iclk- idle */
+- sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK,
+- SR_CLKACTIVITY_IOFF_FOFF);
++ if (cpu_is_omap3630())
++ sr_modify_reg(sr, ERRCONFIG_36XX, SR_IDLEMODE_MASK,
++ SR_FORCE_IDLE);
++ else
++ /* set fclk, iclk- idle */
++ sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK,
++ SR_CLKACTIVITY_IOFF_FOFF);
+
+ clk_disable(sr->clk);
+ sr->is_sr_reset = 1;
+@@ -285,39 +293,55 @@ static u32 swcalc_opp6_nvalue(void)
+ static void sr_set_efuse_nvalues(struct omap_sr *sr)
+ {
+ if (sr->srid == SR1) {
+- sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+- OMAP343X_SR1_SENNENABLE_MASK) >>
+- OMAP343X_SR1_SENNENABLE_SHIFT;
+- sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+- OMAP343X_SR1_SENPENABLE_MASK) >>
+- OMAP343X_SR1_SENPENABLE_SHIFT;
+-
+- sr->opp6_nvalue = swcalc_opp6_nvalue();
+- sr->opp5_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP5_VDD1);
+- sr->opp4_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP4_VDD1);
+- sr->opp3_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP3_VDD1);
+- sr->opp2_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP2_VDD1);
+- sr->opp1_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP1_VDD1);
++ if (cpu_is_omap3630()) {
++ sr->senn_mod = sr->senp_mod = 0x1;
++
++ sr->opp4_nvalue = omap_ctrl_readl(OMAP36XX_CONTROL_FUSE_OPP4_VDD1);
++ sr->opp3_nvalue = omap_ctrl_readl(OMAP36XX_CONTROL_FUSE_OPP3_VDD1);
++ sr->opp2_nvalue = omap_ctrl_readl(OMAP36XX_CONTROL_FUSE_OPP2_VDD1);
++ sr->opp1_nvalue = omap_ctrl_readl(OMAP36XX_CONTROL_FUSE_OPP1_VDD1);
++ } else {
++ sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++ OMAP343X_SR1_SENNENABLE_MASK) >>
++ OMAP343X_SR1_SENNENABLE_SHIFT;
++ sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++ OMAP343X_SR1_SENPENABLE_MASK) >>
++ OMAP343X_SR1_SENPENABLE_SHIFT;
++
++ sr->opp6_nvalue = swcalc_opp6_nvalue();
++ sr->opp5_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP5_VDD1);
++ sr->opp4_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP4_VDD1);
++ sr->opp3_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP3_VDD1);
++ sr->opp2_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP2_VDD1);
++ sr->opp1_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP1_VDD1);
++ }
+ } else if (sr->srid == SR2) {
+- sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+- OMAP343X_SR2_SENNENABLE_MASK) >>
+- OMAP343X_SR2_SENNENABLE_SHIFT;
+-
+- sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+- OMAP343X_SR2_SENPENABLE_MASK) >>
+- OMAP343X_SR2_SENPENABLE_SHIFT;
+-
+- sr->opp3_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP3_VDD2);
+- sr->opp2_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP2_VDD2);
+- sr->opp1_nvalue = omap_ctrl_readl(
+- OMAP343X_CONTROL_FUSE_OPP1_VDD2);
++ if (cpu_is_omap3630()) {
++ sr->senn_mod = sr->senp_mod = 0x1;
++
++ sr->opp1_nvalue = omap_ctrl_readl(OMAP36XX_CONTROL_FUSE_OPP1_VDD2);
++ sr->opp2_nvalue = omap_ctrl_readl(OMAP36XX_CONTROL_FUSE_OPP2_VDD2);
++ } else {
++ sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++ OMAP343X_SR2_SENNENABLE_MASK) >>
++ OMAP343X_SR2_SENNENABLE_SHIFT;
++
++ sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++ OMAP343X_SR2_SENPENABLE_MASK) >>
++ OMAP343X_SR2_SENPENABLE_SHIFT;
++
++ sr->opp3_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP3_VDD2);
++ sr->opp2_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP2_VDD2);
++ sr->opp1_nvalue = omap_ctrl_readl(
++ OMAP343X_CONTROL_FUSE_OPP1_VDD2);
++ }
+ }
+ }
+
+@@ -325,22 +349,42 @@ static void sr_set_efuse_nvalues(struct omap_sr *sr)
+ static void sr_set_testing_nvalues(struct omap_sr *sr)
+ {
+ if (sr->srid == SR1) {
+- sr->senp_mod = 0x03; /* SenN-M5 enabled */
+- sr->senn_mod = 0x03;
+-
+- /* calculate nvalues for each opp */
+- sr->opp5_nvalue = cal_test_nvalue(0xacd + 0x330, 0x848 + 0x330);
+- sr->opp4_nvalue = cal_test_nvalue(0x964 + 0x2a0, 0x727 + 0x2a0);
+- sr->opp3_nvalue = cal_test_nvalue(0x85b + 0x200, 0x655 + 0x200);
+- sr->opp2_nvalue = cal_test_nvalue(0x506 + 0x1a0, 0x3be + 0x1a0);
+- sr->opp1_nvalue = cal_test_nvalue(0x373 + 0x100, 0x28c + 0x100);
++ if (cpu_is_omap3630()) {
++ sr->senp_mod = 0x1;
++ sr->senn_mod = 0x1;
++
++ /* calculate nvalues for each opp */
++ sr->opp1_nvalue = cal_test_nvalue(581, 489);
++ sr->opp2_nvalue = cal_test_nvalue(1072, 910);
++ sr->opp3_nvalue = cal_test_nvalue(1405, 1200);
++ sr->opp4_nvalue = cal_test_nvalue(1842, 1580);
++ sr->opp5_nvalue = cal_test_nvalue(1842, 1580);
++ } else {
++ sr->senp_mod = 0x03; /* SenN-M5 enabled */
++ sr->senn_mod = 0x03;
++
++ /* calculate nvalues for each opp */
++ sr->opp5_nvalue = cal_test_nvalue(0xacd + 0x330, 0x848 + 0x330);
++ sr->opp4_nvalue = cal_test_nvalue(0x964 + 0x2a0, 0x727 + 0x2a0);
++ sr->opp3_nvalue = cal_test_nvalue(0x85b + 0x200, 0x655 + 0x200);
++ sr->opp2_nvalue = cal_test_nvalue(0x506 + 0x1a0, 0x3be + 0x1a0);
++ sr->opp1_nvalue = cal_test_nvalue(0x373 + 0x100, 0x28c + 0x100);
++ }
+ } else if (sr->srid == SR2) {
+- sr->senp_mod = 0x03;
+- sr->senn_mod = 0x03;
+-
+- sr->opp3_nvalue = cal_test_nvalue(0x76f + 0x200, 0x579 + 0x200);
+- sr->opp2_nvalue = cal_test_nvalue(0x4f5 + 0x1c0, 0x390 + 0x1c0);
+- sr->opp1_nvalue = cal_test_nvalue(0x359, 0x25d);
++ if (cpu_is_omap3630()) {
++ sr->senp_mod = 0x1;
++ sr->senn_mod = 0x1;
++
++ sr->opp1_nvalue = cal_test_nvalue(556, 468);
++ sr->opp2_nvalue = cal_test_nvalue(1099, 933);
++ } else {
++ sr->senp_mod = 0x03;
++ sr->senn_mod = 0x03;
++
++ sr->opp3_nvalue = cal_test_nvalue(0x76f + 0x200, 0x579 + 0x200);
++ sr->opp2_nvalue = cal_test_nvalue(0x4f5 + 0x1c0, 0x390 + 0x1c0);
++ sr->opp1_nvalue = cal_test_nvalue(0x359, 0x25d);
++ }
+ }
+
+ }
+@@ -487,6 +531,17 @@ static void sr_configure(struct omap_sr *sr)
+ {
+ u32 sr_config;
+ u32 senp_en , senn_en;
++ u32 senp_en_shift, senn_en_shift, err_config;
++
++ if (cpu_is_omap3630()) {
++ senp_en_shift = SRCONFIG_SENPENABLE_SHIFT_36XX;
++ senn_en_shift = SRCONFIG_SENNENABLE_SHIFT_36XX;
++ err_config = ERRCONFIG_36XX;
++ } else {
++ senp_en_shift = SRCONFIG_SENPENABLE_SHIFT;
++ senn_en_shift = SRCONFIG_SENNENABLE_SHIFT;
++ err_config = ERRCONFIG;
++ }
+
+ if (sr->clk_length == 0)
+ sr_set_clk_length(sr);
+@@ -498,15 +553,15 @@ static void sr_configure(struct omap_sr *sr)
+ (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
+ SRCONFIG_MINMAXAVG_EN |
+- (senn_en << SRCONFIG_SENNENABLE_SHIFT) |
+- (senp_en << SRCONFIG_SENPENABLE_SHIFT) |
++ (senn_en << senn_en_shift) |
++ (senp_en << senp_en_shift) |
+ SRCONFIG_DELAYCTRL;
+
+ sr_write_reg(sr, SRCONFIG, sr_config);
+ sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT |
+ SR1_AVGWEIGHT_SENNAVGWEIGHT);
+
+- sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
++ sr_modify_reg(sr, err_config, (SR_ERRWEIGHT_MASK |
+ SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+ (SR1_ERRWEIGHT | SR1_ERRMAXLIMIT | SR1_ERRMINLIMIT));
+
+@@ -515,14 +570,14 @@ static void sr_configure(struct omap_sr *sr)
+ (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
+ SRCONFIG_MINMAXAVG_EN |
+- (senn_en << SRCONFIG_SENNENABLE_SHIFT) |
+- (senp_en << SRCONFIG_SENPENABLE_SHIFT) |
++ (senn_en << senn_en_shift) |
++ (senp_en << senp_en_shift) |
+ SRCONFIG_DELAYCTRL;
+
+ sr_write_reg(sr, SRCONFIG, sr_config);
+ sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT |
+ SR2_AVGWEIGHT_SENNAVGWEIGHT);
+- sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
++ sr_modify_reg(sr, err_config, (SR_ERRWEIGHT_MASK |
+ SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+ (SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT));
+
+@@ -604,6 +659,7 @@ static int sr_reset_voltage(int srid)
+ static int sr_enable(struct omap_sr *sr, u32 target_opp_no)
+ {
+ u32 nvalue_reciprocal, v;
++ u32 inten, intst, err_config;
+
+ if (!(mpu_opps && l3_opps)) {
+ pr_notice("VSEL values not found\n");
+@@ -662,9 +718,19 @@ static int sr_enable(struct omap_sr *sr, u32 target_opp_no)
+ sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+
+ /* Enable the interrupt */
+- sr_modify_reg(sr, ERRCONFIG,
+- (ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST),
+- (ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST));
++ if (cpu_is_omap3630()) {
++ inten = ERRCONFIG_VPBOUNDINTEN_36XX;
++ intst = ERRCONFIG_VPBOUNDINTST_36XX;
++ err_config = ERRCONFIG_36XX;
++ } else {
++ inten = ERRCONFIG_VPBOUNDINTEN;
++ intst = ERRCONFIG_VPBOUNDINTST;
++ err_config = ERRCONFIG;
++ }
++
++ sr_modify_reg(sr, err_config,
++ (inten | intst),
++ (inten | intst));
+
+ if (sr->srid == SR1) {
+ /* set/latch init voltage */
+diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
+index 2a0e823..f20406b 100644
+--- a/arch/arm/mach-omap2/smartreflex.h
++++ b/arch/arm/mach-omap2/smartreflex.h
+@@ -30,6 +30,9 @@
+ #define SENERROR 0x20
+ #define ERRCONFIG 0x24
+
++#define SENERROR_36XX 0x34
++#define ERRCONFIG_36XX 0x38
++
+ /* SR Modules */
+ #define SR1 1
+ #define SR2 2
+@@ -106,6 +109,9 @@
+ #define SRCONFIG_SENNENABLE_SHIFT 5
+ #define SRCONFIG_SENPENABLE_SHIFT 3
+
++#define SRCONFIG_SENNENABLE_SHIFT_36XX 1
++#define SRCONFIG_SENPENABLE_SHIFT_36XX 0
++
+ #define SRCONFIG_SRENABLE BIT(11)
+ #define SRCONFIG_SENENABLE BIT(10)
+ #define SRCONFIG_ERRGEN_EN BIT(9)
+@@ -136,9 +142,19 @@
+ #define SR_CLKACTIVITY_IOFF_FOFF (0x00 << 20)
+ #define SR_CLKACTIVITY_IOFF_FON (0x02 << 20)
+
++/* IDLEMODE SETTINGS for OMAP3630 */
++#define SR_IDLEMODE_MASK (0x3 << 24)
++#define SR_FORCE_IDLE 0x0
++#define SR_NO_IDLE 0x1
++#define SR_SMART_IDLE 0x2
++#define SR_SMART_IDLE_WKUP 0x3
++
+ #define ERRCONFIG_VPBOUNDINTEN BIT(31)
+ #define ERRCONFIG_VPBOUNDINTST BIT(30)
+
++#define ERRCONFIG_VPBOUNDINTEN_36XX BIT(23)
++#define ERRCONFIG_VPBOUNDINTST_36XX BIT(22)
++
+ #define SR1_ERRWEIGHT (0x07 << 16)
+ #define SR1_ERRMAXLIMIT (0x02 << 8)
+ #define SR1_ERRMINLIMIT (0xFA << 0)
+diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
+index 20f5c98..68100d6 100644
+--- a/arch/arm/plat-omap/include/plat/control.h
++++ b/arch/arm/plat-omap/include/plat/control.h
+@@ -283,6 +283,19 @@
+ #define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
+ #define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
+
++/* OMAP36XX CONTROL FUSE */
++
++#define OMAP36XX_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114)
++#define OMAP36XX_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118)
++#define OMAP36XX_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
++#define OMAP36XX_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110)
++#define OMAP36XX_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0108)
++
++#define OMAP36XX_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
++#define OMAP36XX_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c)
++
++#define OMAP36XX_CONTROL_FUSE_SR (OMAP2_CONTROL_GENERAL + 0x0130)
++
+ /*
+ * Product ID register
+ */
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0004-OMAP3630-PM-implement-Foward-Body-Bias-for-OPP1G.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0004-OMAP3630-PM-implement-Foward-Body-Bias-for-OPP1G.patch
new file mode 100644
index 0000000000..77e9a75b62
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0004-OMAP3630-PM-implement-Foward-Body-Bias-for-OPP1G.patch
@@ -0,0 +1,243 @@
+From 8d78b8198d220d5ebade7587caf664a0ef8c8fe7 Mon Sep 17 00:00:00 2001
+From: Ranjith Lohithakshan <ranjithl@ti.com>
+Date: Mon, 12 Jul 2010 16:25:14 +0530
+Subject: [PATCH 4/9] OMAP3630: PM: implement Foward Body-Bias for OPP1G
+
+Introduces voltscale_adaptive_body_bias function to voltage.c.
+voltscale_adaptive_body_bias is called by omap_voltage_scale after a
+voltage transition has occured. Currently voltscale_adaptive_body_bias
+only implements Forward Body-Bias (FBB) for OMAP3630 when MPU runs at
+1GHz or higher. In the future Reverse Body-Bias might be included.
+
+FBB is an Adaptive Body-Bias technique to boost performance for weak
+process devices at high OPPs. This results in voltage boost on the VDD1
+PMOS back gates when running at maximum OPP. Current recommendations
+are to enable FBB on all 3630 regardless of silicon characteristics and
+EFUSE values.
+
+ABB applies to all OMAP family of devices based on 45nm process,
+which includes OMAP3630, OMAP4, TI816x and TI814x.
+
+Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
+---
+ arch/arm/mach-omap2/prm-regbits-34xx.h | 18 +++++
+ arch/arm/mach-omap2/prm.h | 4 +
+ arch/arm/mach-omap2/smartreflex.c | 130 ++++++++++++++++++++++++++++++++
+ 3 files changed, 152 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
+index 0066693..8dee7e0 100644
+--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
++++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
+@@ -212,6 +212,8 @@
+ /* PRM_SYSCONFIG specific bits */
+
+ /* PRM_IRQSTATUS_MPU specific bits */
++#define OMAP3630_ABB_LDO_TRANXDONE_ST_SHIFT 26
++#define OMAP3630_ABB_LDO_TRANXDONE_ST (1 << 26)
+ #define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT 25
+ #define OMAP3430ES2_SND_PERIPH_DPLL_ST (1 << 25)
+ #define OMAP3430_VC_TIMEOUTERR_ST (1 << 24)
+@@ -581,6 +583,22 @@
+
+ /* PRM_VP2_STATUS specific bits */
+
++/* PRM_LDO_ABB_SETUP specific bits */
++#define OMAP3630_SR2_IN_TRANSITION (1 << 6)
++#define OMAP3630_SR2_STATUS_SHIFT 3
++#define OMAP3630_SR2_STATUS_MASK (3 << 3)
++#define OMAP3630_OPP_CHANGE (1 << 2)
++#define OMAP3630_OPP_SEL_SHIFT 0
++#define OMAP3630_OPP_SEL_MASK (3 << 0)
++
++/* PRM_LDO_ABB_CTRL specific bits */
++#define OMAP3630_SR2_WTCNT_VALUE_SHIFT 8
++#define OMAP3630_SR2_WTCNT_VALUE_MASK (0xff << 8)
++#define OMAP3630_SLEEP_RBB_SEL (1 << 3)
++#define OMAP3630_ACTIVE_FBB_SEL (1 << 2)
++#define OMAP3630_ACTIVE_RBB_SEL (1 << 1)
++#define OMAP3630_SR2EN (1 << 0)
++
+ /* RM_RSTST_NEON specific bits */
+
+ /* PM_WKDEP_NEON specific bits */
+diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
+index ea050ce..b7f95d7 100644
+--- a/arch/arm/mach-omap2/prm.h
++++ b/arch/arm/mach-omap2/prm.h
+@@ -158,6 +158,10 @@
+ #define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+ #define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+ #define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
++#define OMAP3_PRM_LDO_ABB_SETUP_OFFSET 0X00f0
++#define OMAP3630_PRM_LDO_ABB_SETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0X00f0)
++#define OMAP3_PRM_LDO_ABB_CTRL_OFFSET 0X00f4
++#define OMAP3630_PRM_LDO_ABB_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0X00f4)
+
+ #define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+ #define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
+index fdd9540..d7c8a04 100644
+--- a/arch/arm/mach-omap2/smartreflex.c
++++ b/arch/arm/mach-omap2/smartreflex.c
+@@ -42,6 +42,11 @@
+ #define SWCALC_OPP6_DELTA_NNT 379
+ #define SWCALC_OPP6_DELTA_PNT 227
+
++#define ABB_MAX_SETTLING_TIME 30
++
++#define ABB_FAST_OPP 1
++#define ABB_NOMINAL_OPP 2
++#define ABB_SLOW_OPP 3
+
+ /*
+ * VDD1 and VDD2 OPPs derived from the bootarg 'mpurate'
+@@ -397,6 +402,126 @@ static void sr_set_nvalues(struct omap_sr *sr)
+ sr_set_efuse_nvalues(sr);
+ }
+
++/**
++ * sr_voltagescale_adaptive_body_bias - controls ABB ldo during voltage scaling
++ * @target_volt: target voltage determines if ABB ldo is active or bypassed
++ *
++ * Adaptive Body-Bias is a technique in all OMAP silicon that uses the 45nm
++ * process. ABB can boost voltage in high OPPs for silicon with weak
++ * characteristics (forward Body-Bias) as well as lower voltage in low OPPs
++ * for silicon with strong characteristics (Reverse Body-Bias).
++ *
++ * Only Foward Body-Bias for operating at high OPPs is implemented below, per
++ * recommendations from silicon team.
++ * Reverse Body-Bias for saving power in active cases and sleep cases is not
++ * yet implemented.
++ */
++static int sr_voltagescale_adaptive_body_bias(u32 target_opp_no)
++{
++ u32 sr2en_enabled;
++ int timeout;
++ int sr2_wtcnt_value;
++ struct clk *sys_ck;
++
++ sys_ck = clk_get(NULL, "sys_ck");
++ if (IS_ERR(sys_ck)) {
++ pr_warning("%s: Could not get the sys clk to calculate"
++ "SR2_WTCNT_VALUE \n", __func__);
++ return -ENOENT;
++ }
++
++ /* calculate SR2_WTCNT_VALUE settling time */
++ sr2_wtcnt_value = (ABB_MAX_SETTLING_TIME *
++ (clk_get_rate(sys_ck) / 1000000) / 8);
++
++ clk_put(sys_ck);
++
++ /* has SR2EN been enabled previously? */
++ sr2en_enabled = (prm_read_mod_reg(OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_CTRL_OFFSET) &
++ OMAP3630_SR2EN);
++
++ /* select fast, nominal or slow OPP for ABB ldo */
++ if (target_opp_no >= VDD1_OPP4) {
++ /* program for fast opp - enable FBB */
++ prm_rmw_mod_reg_bits(OMAP3630_OPP_SEL_MASK,
++ (ABB_FAST_OPP << OMAP3630_OPP_SEL_SHIFT),
++ OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_SETUP_OFFSET);
++
++ /* enable the ABB ldo if not done already */
++ if (!sr2en_enabled)
++ prm_set_mod_reg_bits(OMAP3630_SR2EN,
++ OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_CTRL_OFFSET);
++ } else if (sr2en_enabled) {
++ /* program for nominal opp - bypass ABB ldo */
++ prm_rmw_mod_reg_bits(OMAP3630_OPP_SEL_MASK,
++ (ABB_NOMINAL_OPP << OMAP3630_OPP_SEL_SHIFT),
++ OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_SETUP_OFFSET);
++ } else {
++ /* nothing to do here yet... might enable RBB here someday */
++ return 0;
++ }
++
++ /* set ACTIVE_FBB_SEL for all 45nm silicon */
++ prm_set_mod_reg_bits(OMAP3630_ACTIVE_FBB_SEL,
++ OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_CTRL_OFFSET);
++
++ /* program settling time of 30us for ABB ldo transition */
++ prm_rmw_mod_reg_bits(OMAP3630_SR2_WTCNT_VALUE_MASK,
++ (sr2_wtcnt_value << OMAP3630_SR2_WTCNT_VALUE_SHIFT),
++ OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_CTRL_OFFSET);
++
++ /* clear ABB ldo interrupt status */
++ prm_write_mod_reg(OMAP3630_ABB_LDO_TRANXDONE_ST,
++ OCP_MOD,
++ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
++
++ /* enable ABB LDO OPP change */
++ prm_set_mod_reg_bits(OMAP3630_OPP_CHANGE,
++ OMAP3430_GR_MOD,
++ OMAP3_PRM_LDO_ABB_SETUP_OFFSET);
++
++ timeout = 0;
++
++ /* wait until OPP change completes */
++ while ((timeout < ABB_MAX_SETTLING_TIME ) &&
++ (!(prm_read_mod_reg(OCP_MOD,
++ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET) &
++ OMAP3630_ABB_LDO_TRANXDONE_ST))) {
++ udelay(1);
++ timeout++;
++ }
++
++ if (timeout == ABB_MAX_SETTLING_TIME)
++ pr_debug("ABB: TRANXDONE timed out waiting for OPP change\n");
++
++ timeout = 0;
++
++ /* Clear all pending TRANXDONE interrupts/status */
++ while (timeout < ABB_MAX_SETTLING_TIME) {
++ prm_write_mod_reg(OMAP3630_ABB_LDO_TRANXDONE_ST,
++ OCP_MOD,
++ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
++ if (!(prm_read_mod_reg(OCP_MOD,
++ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET)
++ & OMAP3630_ABB_LDO_TRANXDONE_ST))
++ break;
++
++ udelay(1);
++ timeout++;
++ }
++ if (timeout == ABB_MAX_SETTLING_TIME)
++ pr_debug("ABB: TRANXDONE timed out trying to clear status\n");
++
++ return 0;
++}
++
++
+ static void sr_configure_vp(int srid)
+ {
+ u32 vpconfig;
+@@ -462,6 +587,8 @@ static void sr_configure_vp(int srid)
+ prm_clear_mod_reg_bits(OMAP3430_FORCEUPDATE, OMAP3430_GR_MOD,
+ OMAP3_PRM_VP1_CONFIG_OFFSET);
+
++ if(cpu_is_omap3630())
++ sr_voltagescale_adaptive_body_bias(target_opp_no);
+ } else if (srid == SR2) {
+ if (vdd2_opp == 0)
+ target_opp_no = get_vdd2_opp();
+@@ -1031,6 +1158,9 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32 current_opp,
+ t2_smps_delay = ((t2_smps_steps * 125) / 40) + 2;
+ udelay(t2_smps_delay);
+
++ if (cpu_is_omap3630() && (vdd == VDD1_OPP))
++ sr_voltagescale_adaptive_body_bias(target_opp_no);
++
+ if (sr_status) {
+ if (vdd == VDD1_OPP)
+ sr_start_vddautocomap(SR1, target_opp_no);
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0005-Revert-Revert-OMAP-DSS2-FIFI-UNDERFLOW-issue-fix.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0005-Revert-Revert-OMAP-DSS2-FIFI-UNDERFLOW-issue-fix.patch
new file mode 100644
index 0000000000..0a041bba4e
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0005-Revert-Revert-OMAP-DSS2-FIFI-UNDERFLOW-issue-fix.patch
@@ -0,0 +1,198 @@
+From a107c9c4bd642fd5044275ffcb00a8e20da481c7 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Tue, 10 Aug 2010 20:05:51 +0530
+Subject: [PATCH 5/9] Revert "Revert "OMAP: DSS2: FIFI UNDERFLOW issue fixed""
+
+This reverts commit b2c74dc43741d8d824e5439f6a82c0a5aa5d1c80.
+
+There was small bug in the GFX UNDERFLOW patch, so I had reverted it and now
+since I have fix for the same so I am again commiting the fix which reverts the
+original patch with fix.
+
+Original commit - 4b58d194fd8f5a1c68803eb326e9a71621571696.
+Revert commit - b2c74dc43741d8d824e5439f6a82c0a5aa5d1c80
+---
+ drivers/video/omap2/omapfb/omapfb-main.c | 83 ++++++++++++++++++++----------
+ 1 files changed, 55 insertions(+), 28 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index ef29983..7f47a34 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -182,6 +182,11 @@ static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
+ static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
+ {
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ if (rot == FB_ROTATE_CW)
++ rot = FB_ROTATE_CCW;
++ else if (rot == FB_ROTATE_CCW)
++ rot = FB_ROTATE_CW;
++
+ return ofbi->region.vrfb.paddr[rot]
+ + omapfb_get_vrfb_offset(ofbi, rot);
+ } else {
+@@ -189,20 +194,32 @@ static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
+ }
+ }
+
+-static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
++static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi, int rot)
+ {
+- if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+- return ofbi->region.vrfb.paddr[0];
+- else
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ if (rot == FB_ROTATE_CW)
++ rot = FB_ROTATE_CCW;
++ else if (rot == FB_ROTATE_CCW)
++ rot = FB_ROTATE_CW;
++
++ return ofbi->region.vrfb.paddr[rot];
++ } else {
+ return ofbi->region.paddr;
++ }
+ }
+
+-static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
++static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi, int rot)
+ {
+- if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+- return ofbi->region.vrfb.vaddr[0];
+- else
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ if (rot == FB_ROTATE_CW)
++ rot = FB_ROTATE_CCW;
++ else if (rot == FB_ROTATE_CCW)
++ rot = FB_ROTATE_CW;
++
++ return ofbi->region.vrfb.vaddr[rot];
++ } else {
+ return ofbi->region.vaddr;
++ }
+ }
+
+ static struct omapfb_colormode omapfb_colormodes[] = {
+@@ -501,7 +518,7 @@ static int setup_vrfb_rotation(struct fb_info *fbi)
+ unsigned bytespp;
+ bool yuv_mode;
+ enum omap_color_mode mode;
+- int r;
++ int r, rotation = var->rotate;
+ bool reconf;
+
+ if (!rg->size || ofbi->rotation_type != OMAP_DSS_ROT_VRFB)
+@@ -509,6 +526,11 @@ static int setup_vrfb_rotation(struct fb_info *fbi)
+
+ DBG("setup_vrfb_rotation\n");
+
++ if (rotation == FB_ROTATE_CW)
++ rotation = FB_ROTATE_CCW;
++ else if (rotation == FB_ROTATE_CCW)
++ rotation = FB_ROTATE_CW;
++
+ r = fb_mode_to_dss_mode(var, &mode);
+ if (r)
+ return r;
+@@ -532,32 +554,35 @@ static int setup_vrfb_rotation(struct fb_info *fbi)
+ vrfb->yres != var->yres_virtual)
+ reconf = true;
+
+- if (vrfb->vaddr[0] && reconf) {
++ if (vrfb->vaddr[rotation] && reconf) {
+ fbi->screen_base = NULL;
+ fix->smem_start = 0;
+ fix->smem_len = 0;
+- iounmap(vrfb->vaddr[0]);
+- vrfb->vaddr[0] = NULL;
++ iounmap(vrfb->vaddr[rotation]);
++ vrfb->vaddr[rotation] = NULL;
+ DBG("setup_vrfb_rotation: reset fb\n");
+ }
+
+- if (vrfb->vaddr[0])
++ if (vrfb->vaddr[rotation])
+ return 0;
+
+- omap_vrfb_setup(&rg->vrfb, rg->paddr,
+- var->xres_virtual,
+- var->yres_virtual,
+- bytespp, yuv_mode);
++ if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW)
++ omap_vrfb_setup(&rg->vrfb, rg->paddr,
++ var->yres_virtual, var->xres_virtual,
++ bytespp, yuv_mode);
++ else
++ omap_vrfb_setup(&rg->vrfb, rg->paddr,
++ var->xres_virtual, var->yres_virtual,
++ bytespp, yuv_mode);
+
+- /* Now one can ioremap the 0 angle view */
+- r = omap_vrfb_map_angle(vrfb, var->yres_virtual, 0);
++ /* Now one can ioremap the rotation angle view */
++ r = omap_vrfb_map_angle(vrfb, var->yres_virtual, rotation);
+ if (r)
+ return r;
+-
+ /* used by open/write in fbmem.c */
+- fbi->screen_base = ofbi->region.vrfb.vaddr[0];
++ fbi->screen_base = ofbi->region.vrfb.vaddr[rotation];
+
+- fix->smem_start = ofbi->region.vrfb.paddr[0];
++ fix->smem_start = ofbi->region.vrfb.paddr[rotation];
+
+ switch (var->nonstd) {
+ case OMAPFB_COLOR_YUV422:
+@@ -601,7 +626,8 @@ void set_fb_fix(struct fb_info *fbi)
+ DBG("set_fb_fix\n");
+
+ /* used by open/write in fbmem.c */
+- fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi);
++ fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi,
++ var->rotate);
+
+ /* used by mmap in fbmem.c */
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+@@ -624,7 +650,7 @@ void set_fb_fix(struct fb_info *fbi)
+ fix->smem_len = rg->size;
+ }
+
+- fix->smem_start = omapfb_get_region_paddr(ofbi);
++ fix->smem_start = omapfb_get_region_paddr(ofbi, var->rotate);
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+
+@@ -860,11 +886,11 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+
+
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+- data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
++ data_start_p = omapfb_get_region_rot_paddr(ofbi, 0);
+ data_start_v = NULL;
+ } else {
+- data_start_p = omapfb_get_region_paddr(ofbi);
+- data_start_v = omapfb_get_region_vaddr(ofbi);
++ data_start_p = omapfb_get_region_paddr(ofbi, 0);
++ data_start_v = omapfb_get_region_vaddr(ofbi, 0);
+ }
+
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+@@ -1076,6 +1102,7 @@ static struct vm_operations_struct mmap_user_ops = {
+ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
+ {
+ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct fb_var_screeninfo *var = &fbi->var;
+ struct fb_fix_screeninfo *fix = &fbi->fix;
+ unsigned long off;
+ unsigned long start;
+@@ -1087,7 +1114,7 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
+ return -EINVAL;
+ off = vma->vm_pgoff << PAGE_SHIFT;
+
+- start = omapfb_get_region_paddr(ofbi);
++ start = omapfb_get_region_paddr(ofbi, var->rotate);
+ len = fix->smem_len;
+ if (off >= len)
+ return -EINVAL;
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0006-modules-Skip-empty-sections-when-exporting-section.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0006-modules-Skip-empty-sections-when-exporting-section.patch
new file mode 100644
index 0000000000..3ca7d2ef2b
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0006-modules-Skip-empty-sections-when-exporting-section.patch
@@ -0,0 +1,84 @@
+From 412656ce83a2605119dc1a7bc5492a13240dc666 Mon Sep 17 00:00:00 2001
+From: Ben Hutchings <ben@decadent.org.uk>
+Date: Sat, 19 Dec 2009 14:43:01 +0000
+Subject: [PATCH 6/9] modules: Skip empty sections when exporting section notes
+
+Commit 35dead4 "modules: don't export section names of empty sections
+via sysfs" changed the set of sections that have attributes, but did
+not change the iteration over these attributes in add_notes_attrs().
+This can lead to add_notes_attrs() creating attributes with the wrong
+names or with null name pointers.
+
+Introduce a sect_empty() function and use it in both add_sect_attrs()
+and add_notes_attrs().
+
+Reported-by: Martin Michlmayr <tbm@cyrius.com>
+Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
+Tested-by: Martin Michlmayr <tbm@cyrius.com>
+Cc: stable@kernel.org
+Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sanjeev Premi <premi@ti.com>
+---
+ kernel/module.c | 17 ++++++++++-------
+ 1 files changed, 10 insertions(+), 7 deletions(-)
+
+diff --git a/kernel/module.c b/kernel/module.c
+index 12afc5a..a1b4a43 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -996,6 +996,12 @@ static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs,
+ * J. Corbet <corbet@lwn.net>
+ */
+ #if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
++
++static inline bool sect_empty(const Elf_Shdr *sect)
++{
++ return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0;
++}
++
+ struct module_sect_attr
+ {
+ struct module_attribute mattr;
+@@ -1037,8 +1043,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect,
+
+ /* Count loaded sections and allocate structures */
+ for (i = 0; i < nsect; i++)
+- if (sechdrs[i].sh_flags & SHF_ALLOC
+- && sechdrs[i].sh_size)
++ if (!sect_empty(&sechdrs[i]))
+ nloaded++;
+ size[0] = ALIGN(sizeof(*sect_attrs)
+ + nloaded * sizeof(sect_attrs->attrs[0]),
+@@ -1056,9 +1061,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect,
+ sattr = &sect_attrs->attrs[0];
+ gattr = &sect_attrs->grp.attrs[0];
+ for (i = 0; i < nsect; i++) {
+- if (! (sechdrs[i].sh_flags & SHF_ALLOC))
+- continue;
+- if (!sechdrs[i].sh_size)
++ if (sect_empty(&sechdrs[i]))
+ continue;
+ sattr->address = sechdrs[i].sh_addr;
+ sattr->name = kstrdup(secstrings + sechdrs[i].sh_name,
+@@ -1142,7 +1145,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
+ /* Count notes sections and allocate structures. */
+ notes = 0;
+ for (i = 0; i < nsect; i++)
+- if ((sechdrs[i].sh_flags & SHF_ALLOC) &&
++ if (!sect_empty(&sechdrs[i]) &&
+ (sechdrs[i].sh_type == SHT_NOTE))
+ ++notes;
+
+@@ -1158,7 +1161,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
+ notes_attrs->notes = notes;
+ nattr = &notes_attrs->attrs[0];
+ for (loaded = i = 0; i < nsect; ++i) {
+- if (!(sechdrs[i].sh_flags & SHF_ALLOC))
++ if (sect_empty(&sechdrs[i]))
+ continue;
+ if (sechdrs[i].sh_type == SHT_NOTE) {
+ nattr->attr.name = mod->sect_attrs->attrs[loaded].name;
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0007-RTC-s35390a-Bug-Fix-Pie-mode-doesn-t-work.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0007-RTC-s35390a-Bug-Fix-Pie-mode-doesn-t-work.patch
new file mode 100644
index 0000000000..6dd2b95bd0
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0007-RTC-s35390a-Bug-Fix-Pie-mode-doesn-t-work.patch
@@ -0,0 +1,68 @@
+From 243e09d50e7a03eb9fc8e7313784f2ed96602890 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Fri, 13 Aug 2010 19:23:23 +0530
+Subject: [PATCH 7/9] RTC:s35390a:Bug Fix: Pie mode doesn't work
+
+Due to some race condition between Work and ISR, somehow interrupt
+is not getting enabled and because of this RTC interrupt was not working.
+---
+ drivers/rtc/rtc-s35390a.c | 21 ++++++++++-----------
+ 1 files changed, 10 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
+index de597c1..b30a57c 100644
+--- a/drivers/rtc/rtc-s35390a.c
++++ b/drivers/rtc/rtc-s35390a.c
+@@ -230,11 +230,15 @@ static int s35390a_freq_irq_enable(struct i2c_client *client, unsigned enabled)
+ return err;
+ }
+
+- buf[0] = s35390a->rtc->irq_freq;
+- /* This chip expects the bits of each byte to be in reverse order */
+- buf[0] = bitrev8(buf[0]);
++ if (enabled) {
++ buf[0] = s35390a->rtc->irq_freq;
+
+- return s35390a_set_reg(s35390a, S35390A_CMD_INT1_REG1, buf, sizeof(buf));
++ buf[0] = bitrev8(buf[0]);
++ err = s35390a_set_reg(s35390a, S35390A_CMD_INT1_REG1, buf,
++ sizeof(buf));
++ }
++
++ return err;
+ }
+
+ static int s35390a_rtc_freq_irq_enable(struct device *dev, int enabled)
+@@ -419,20 +423,14 @@ static void s35390a_work(struct work_struct *work)
+ /* Notify RTC core on event */
+ rtc_update_irq(s35390a->rtc, 1, RTC_IRQF | RTC_AF);
+ s35390a_alarm_irq_enable(client, 0);
+- enable_irq(client->irq);
+ } else if (buf[0] & BIT(0)) {
+ /* Notify RTC core on event */
+ rtc_update_irq(s35390a->rtc, 1, RTC_PF | RTC_IRQF);
+- s35390a_freq_irq_enable(client, 0);
+- enable_irq(client->irq);
+- s35390a_freq_irq_enable(client, 1);
+ } else if (buf[0] & BIT(1)) {
+ /* Notify RTC core on event */
+ rtc_update_irq(s35390a->rtc, 1, RTC_UF | RTC_IRQF);
+- s35390a_update_irq_enable(client, 0);
+- enable_irq(client->irq);
+- s35390a_update_irq_enable(client, 1);
+ }
++ enable_irq(client->irq);
+ out:
+ return;
+ }
+@@ -559,6 +557,7 @@ static int s35390a_probe(struct i2c_client *client,
+ }
+ s35390a->rtc->irq_freq = 0;
+ s35390a->rtc->max_user_freq = 16;
++
+ return 0;
+
+ exit_intr:
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0008-OMAP3EVM-Set-minimum-throughput-requirement-for-DSS.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0008-OMAP3EVM-Set-minimum-throughput-requirement-for-DSS.patch
new file mode 100644
index 0000000000..e567ed70d7
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0008-OMAP3EVM-Set-minimum-throughput-requirement-for-DSS.patch
@@ -0,0 +1,71 @@
+From ba573a248dc8c33ff21fc4efbfea0ca85cdbc5d0 Mon Sep 17 00:00:00 2001
+From: Ranjith Lohithakshan <ranjithl@ti.com>
+Date: Tue, 7 Sep 2010 10:05:11 +0530
+Subject: [PATCH 8/9] OMAP3EVM: Set minimum throughput requirement for DSS
+
+GFX_FIFO_UNDERFLOW has been observed when the L3 rate is lowered
+below 100MHz or so. Once this underflow happens the display stops
+working.
+
+This patch puts a minimum bus throughput requirement when lcd, tv
+or dvi displays are enabled. The throughput is calculated in such
+a manner that it will translate into a minimum L3 rate of 100MHz.
+
+Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3evm.c | 8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
+index eb7ad1c..710a25d 100644
+--- a/arch/arm/mach-omap2/board-omap3evm.c
++++ b/arch/arm/mach-omap2/board-omap3evm.c
+@@ -422,12 +422,15 @@ static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
+ else
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+
++ omap_pm_set_min_bus_tput(&dssdev->dev, OCP_INITIATOR_AGENT, 400000);
++
+ lcd_enabled = 1;
+ return 0;
+ }
+
+ static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
+ {
++ omap_pm_set_min_bus_tput(&dssdev->dev, OCP_INITIATOR_AGENT, 0);
+ gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+@@ -449,11 +452,13 @@ static struct omap_dss_device omap3_evm_lcd_device = {
+
+ static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
+ {
++ omap_pm_set_min_bus_tput(&dssdev->dev, OCP_INITIATOR_AGENT, 400000);
+ return 0;
+ }
+
+ static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
+ {
++ omap_pm_set_min_bus_tput(&dssdev->dev, OCP_INITIATOR_AGENT, 0);
+ }
+
+ static struct omap_dss_device omap3_evm_tv_device = {
+@@ -488,12 +493,15 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
+ omap_mux_set_gpio(OMAP_MUX_MODE3, 3);
+ }
+
++ omap_pm_set_min_bus_tput(&dssdev->dev, OCP_INITIATOR_AGENT, 400000);
++
+ dvi_enabled = 1;
+ return 0;
+ }
+
+ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
+ {
++ omap_pm_set_min_bus_tput(&dssdev->dev, OCP_INITIATOR_AGENT, 0);
+ gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
+
+ dvi_enabled = 0;
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp-2.6.32/pending/0009-ehci-fix-device-detect-issue-with-modules.patch b/recipes/linux/linux-omap-psp-2.6.32/pending/0009-ehci-fix-device-detect-issue-with-modules.patch
new file mode 100644
index 0000000000..c0d4131982
--- /dev/null
+++ b/recipes/linux/linux-omap-psp-2.6.32/pending/0009-ehci-fix-device-detect-issue-with-modules.patch
@@ -0,0 +1,159 @@
+From 39bf598ec0579e3bfc55f9038eccaaa5e2755c70 Mon Sep 17 00:00:00 2001
+From: Ajay Kumar Gupta <ajay.gupta@ti.com>
+Date: Thu, 17 Jun 2010 13:58:46 +0530
+Subject: [PATCH 9/9] ehci: fix device detect issue with modules
+
+Currently devices don't get detected automatically if the ehci
+module is inserted 2nd time onward. We need to disconnect and
+reconnect the device for it to get detected and enumerated.
+
+Resetting the USB PHY after the EHCI controller has been initilized
+fixes this issue.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+ drivers/usb/host/ehci-omap.c | 86 ++++++++++++++++++-----------------------
+ 1 files changed, 38 insertions(+), 48 deletions(-)
+
+diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
+index 0f8fbf5..7d3a150 100644
+--- a/drivers/usb/host/ehci-omap.c
++++ b/drivers/usb/host/ehci-omap.c
+@@ -411,6 +411,31 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+
+ /*-------------------------------------------------------------------------*/
+
++void ehci_omap_phy_reset(struct ehci_hcd_omap *omap)
++{
++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) &&
++ gpio_is_valid(omap->reset_gpio_port[0])) {
++ gpio_request(omap->reset_gpio_port[0], "HSUSB0 reset");
++ gpio_direction_output(omap->reset_gpio_port[0], 0);
++ }
++
++ if ((omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) &&
++ gpio_is_valid(omap->reset_gpio_port[1])) {
++ gpio_request(omap->reset_gpio_port[1], "HSUSB1 reset");
++ gpio_direction_output(omap->reset_gpio_port[1], 0);
++ }
++
++ /* Hold the PHY in RESET for enough time till DIR is high */
++ udelay(10);
++
++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) &&
++ gpio_is_valid(omap->reset_gpio_port[0]))
++ gpio_set_value(omap->reset_gpio_port[0], 1);
++ if ((omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) &&
++ gpio_is_valid(omap->reset_gpio_port[1]))
++ gpio_set_value(omap->reset_gpio_port[1], 1);
++}
++
+ /* omap_start_ehc
+ * - Start the TI USBHOST controller
+ */
+@@ -445,24 +470,6 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
+ }
+ clk_enable(omap->usbhost1_48m_fck);
+
+- if (omap->phy_reset) {
+- /* Refer: ISSUE1 */
+- if (gpio_is_valid(omap->reset_gpio_port[0])) {
+- gpio_request(omap->reset_gpio_port[0],
+- "USB1 PHY reset");
+- gpio_direction_output(omap->reset_gpio_port[0], 0);
+- }
+-
+- if (gpio_is_valid(omap->reset_gpio_port[1])) {
+- gpio_request(omap->reset_gpio_port[1],
+- "USB2 PHY reset");
+- gpio_direction_output(omap->reset_gpio_port[1], 0);
+- }
+-
+- /* Hold the PHY in RESET for enough time till DIR is high */
+- udelay(10);
+- }
+-
+ /* Configure TLL for 60Mhz clk for ULPI */
+ omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
+ if (IS_ERR(omap->usbtll_fck)) {
+@@ -576,20 +583,6 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
+ omap_usb_utmi_init(omap, tll_ch_mask);
+ }
+
+- if (omap->phy_reset) {
+- /* Refer ISSUE1:
+- * Hold the PHY in RESET for enough time till
+- * PHY is settled and ready
+- */
+- udelay(10);
+-
+- if (gpio_is_valid(omap->reset_gpio_port[0]))
+- gpio_set_value(omap->reset_gpio_port[0], 1);
+-
+- if (gpio_is_valid(omap->reset_gpio_port[1]))
+- gpio_set_value(omap->reset_gpio_port[1], 1);
+- }
+-
+ return 0;
+
+ err_sys_status:
+@@ -604,14 +597,6 @@ err_tll_fck:
+ clk_disable(omap->usbhost1_48m_fck);
+ clk_put(omap->usbhost1_48m_fck);
+
+- if (omap->phy_reset) {
+- if (gpio_is_valid(omap->reset_gpio_port[0]))
+- gpio_free(omap->reset_gpio_port[0]);
+-
+- if (gpio_is_valid(omap->reset_gpio_port[1]))
+- gpio_free(omap->reset_gpio_port[1]);
+- }
+-
+ err_host_48m_fck:
+ clk_disable(omap->usbhost2_120m_fck);
+ clk_put(omap->usbhost2_120m_fck);
+@@ -697,14 +682,6 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
+ omap->usbtll_ick = NULL;
+ }
+
+- if (omap->phy_reset) {
+- if (gpio_is_valid(omap->reset_gpio_port[0]))
+- gpio_free(omap->reset_gpio_port[0]);
+-
+- if (gpio_is_valid(omap->reset_gpio_port[1]))
+- gpio_free(omap->reset_gpio_port[1]);
+- }
+-
+ dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
+ }
+
+@@ -1033,6 +1010,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
+ /* here we "know" root ports should always stay powered */
+ ehci_port_power(omap->ehci, 1);
+
++ /* reset the USB PHY */
++ if (omap->phy_reset)
++ ehci_omap_phy_reset(omap);
++
+ return 0;
+
+ err_add_hcd:
+@@ -1083,6 +1064,15 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
+
+ usb_remove_hcd(hcd);
+ omap_stop_ehc(omap, hcd);
++
++ if (omap->phy_reset) {
++ if (gpio_is_valid(omap->reset_gpio_port[0]))
++ gpio_free(omap->reset_gpio_port[0]);
++
++ if (gpio_is_valid(omap->reset_gpio_port[1]))
++ gpio_free(omap->reset_gpio_port[1]);
++ }
++
+ iounmap(hcd->regs);
+ for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+ if (omap->regulator[i]) {
+--
+1.6.2.4
+
diff --git a/recipes/linux/linux-omap-psp_2.6.32.bb b/recipes/linux/linux-omap-psp_2.6.32.bb
index 3d31f7d973..7d0118df69 100644
--- a/recipes/linux/linux-omap-psp_2.6.32.bb
+++ b/recipes/linux/linux-omap-psp_2.6.32.bb
@@ -134,6 +134,15 @@ SRC_URI = "git://arago-project.org/git/people/sriram/ti-psp-omap.git;protocol=gi
file://0001-BeagleBoard-Adjust-USER-button-pin-for-xM.patch \
file://cam/0001-omap3beagle-Add-camera-bootarg.patch \
file://porches.patch \
+ file://pending/0001-OMAP3-SDRC-add-100MHz-timing-data-for-Hynix-H8KDS0.patch \
+ file://pending/0002-omap3-Fix-voltage-and-frequency-scaling-order-when.patch \
+ file://pending/0003-OMAP3-PM-Introduce-Smartreflex-support-on-OMAP3630.patch \
+ file://pending/0004-OMAP3630-PM-implement-Foward-Body-Bias-for-OPP1G.patch \
+ file://pending/0005-Revert-Revert-OMAP-DSS2-FIFI-UNDERFLOW-issue-fix.patch \
+ file://pending/0006-modules-Skip-empty-sections-when-exporting-section.patch \
+ file://pending/0007-RTC-s35390a-Bug-Fix-Pie-mode-doesn-t-work.patch \
+ file://pending/0008-OMAP3EVM-Set-minimum-throughput-requirement-for-DSS.patch \
+ file://pending/0009-ehci-fix-device-detect-issue-with-modules.patch \
file://defconfig"
SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \