diff options
| author | Bernhard Guillon <Bernhard.Guillon@opensimpad.org> | 2007-02-13 15:32:49 +0000 |
|---|---|---|
| committer | Marcin Juszkiewicz <hrw@openembedded.org> | 2007-02-13 15:32:49 +0000 |
| commit | 90613b4eb49820f5c78234603d0fcfbe621f6f09 (patch) | |
| tree | a79c36b4e5d27b30ca7a5ed7d551570b77c8bfd8 | |
| parent | 8933f1a15604ac71bfa3c2b1951df67250c9a291 (diff) | |
simpad: added 2.6.20 kernel - close #1867
| -rw-r--r-- | conf/machine/include/simpad-2.6.conf | 2 | ||||
| -rw-r--r-- | packages/linux/linux/simpad/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/linux/linux/simpad/defconfig | 1167 | ||||
| -rw-r--r-- | packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch | 5382 | ||||
| -rw-r--r-- | packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch | 227 | ||||
| -rw-r--r-- | packages/linux/linux_2.6.20.bb | 5 |
6 files changed, 6782 insertions, 1 deletions
diff --git a/conf/machine/include/simpad-2.6.conf b/conf/machine/include/simpad-2.6.conf index 45ddac1bec..69f04f0730 100644 --- a/conf/machine/include/simpad-2.6.conf +++ b/conf/machine/include/simpad-2.6.conf @@ -1,4 +1,4 @@ -PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6" +PREFERRED_PROVIDER_virtual/kernel = "linux" PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod-2.6:module-init-tools-cross" BOOTSTRAP_EXTRA_RDEPENDS += "udev module-init-tools" diff --git a/packages/linux/linux/simpad/.mtn2git_empty b/packages/linux/linux/simpad/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux/simpad/.mtn2git_empty diff --git a/packages/linux/linux/simpad/defconfig b/packages/linux/linux/simpad/defconfig new file mode 100644 index 0000000000..a718a46989 --- /dev/null +++ b/packages/linux/linux/simpad/defconfig @@ -0,0 +1,1167 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Mon Feb 12 16:35:21 2007 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="oe1" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +# CONFIG_SA1100_COLLIE is not set +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +# CONFIG_SA1100_PLEB is not set +# CONFIG_SA1100_SHANNON is not set +CONFIG_SA1100_SIMPAD=y +# CONFIG_SA1100_SSP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set + +# +# Bus support +# +CONFIG_ISA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_SA1100=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=2 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +CONFIG_IRPORT_SIR=m + +# +# Old Serial dongle support +# +# CONFIG_DONGLE_OLD is not set + +# +# FIR device drivers +# +CONFIG_SA1100_FIR=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_SA1100=y +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_CS89x0 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set +CONFIG_PCMCIA_WAVELAN=m +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=m +CONFIG_PCMCIA_3C574=m +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +CONFIG_PCMCIA_SMC91C92=m +CONFIG_PCMCIA_XIRC2PS=m +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=800 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=800 +CONFIG_INPUT_TSDEV_SCREEN_Y=600 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# Multimedia Capabilities Port drivers +# +CONFIG_MCP=y +CONFIG_MCP_SA11X0=y +CONFIG_MCP_UCB1200=y +CONFIG_MCP_UCB1200_TS=y +CONFIG_MCP_UCB1200_SWITCHES=y + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_SA1100 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_MQ200=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch new file mode 100644 index 0000000000..3c91b2cbf8 --- /dev/null +++ b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch @@ -0,0 +1,5382 @@ +diff -uNr linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig linux-2.6.20/arch/arm/configs/simpad_defconfig +--- linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig 2007-02-10 19:01:14.000000000 +0100 ++++ linux-2.6.20/arch/arm/configs/simpad_defconfig 2007-02-11 16:39:39.000000000 +0100 +@@ -1,75 +1,121 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.12-rc1-bk2 +-# Mon Mar 28 00:10:36 2005 ++# Linux kernel version: 2.6.19.1 ++# Tue Jan 2 22:07:26 2007 + # + CONFIG_ARM=y ++# CONFIG_GENERIC_TIME is not set + CONFIG_MMU=y +-CONFIG_UID16=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y +-CONFIG_GENERIC_IOMAP=y ++CONFIG_ARCH_MTD_XIP=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + + # + # Code maturity level options + # + CONFIG_EXPERIMENTAL=y +-CONFIG_CLEAN_COMPILE=y + CONFIG_BROKEN_ON_SMP=y + CONFIG_LOCK_KERNEL=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 + + # + # General setup + # + CONFIG_LOCALVERSION="oe1" ++CONFIG_LOCALVERSION_AUTO=y + CONFIG_SWAP=y + CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set + # CONFIG_POSIX_MQUEUE is not set + # CONFIG_BSD_PROCESS_ACCT is not set +-CONFIG_SYSCTL=y ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set + # CONFIG_AUDIT is not set +-CONFIG_HOTPLUG=y +-CONFIG_KOBJECT_UEVENT=y + # CONFIG_IKCONFIG is not set ++# CONFIG_RELAY is not set ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y + CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y + CONFIG_KALLSYMS=y + CONFIG_KALLSYMS_ALL=y + CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y + CONFIG_BASE_FULL=y + CONFIG_FUTEX=y + CONFIG_EPOLL=y +-CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_SHMEM=y +-CONFIG_CC_ALIGN_FUNCTIONS=0 +-CONFIG_CC_ALIGN_LABELS=0 +-CONFIG_CC_ALIGN_LOOPS=0 +-CONFIG_CC_ALIGN_JUMPS=0 ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y + # CONFIG_TINY_SHMEM is not set + CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set + + # + # Loadable module support + # + CONFIG_MODULES=y + # CONFIG_MODULE_UNLOAD is not set +-CONFIG_OBSOLETE_MODPARM=y + # CONFIG_MODVERSIONS is not set + # CONFIG_MODULE_SRCVERSION_ALL is not set + CONFIG_KMOD=y + + # ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++ ++# + # System Type + # ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set + # CONFIG_ARCH_CLPS7500 is not set + # CONFIG_ARCH_CLPS711X is not set + # CONFIG_ARCH_CO285 is not set + # CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set + # CONFIG_ARCH_FOOTBRIDGE is not set +-# CONFIG_ARCH_INTEGRATOR is not set +-# CONFIG_ARCH_IOP3XX is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set + # CONFIG_ARCH_IXP4XX is not set + # CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP23XX is not set + # CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PNX4008 is not set + # CONFIG_ARCH_PXA is not set + # CONFIG_ARCH_RPC is not set + CONFIG_ARCH_SA1100=y +@@ -77,9 +123,6 @@ + # CONFIG_ARCH_SHARK is not set + # CONFIG_ARCH_LH7A40X is not set + # CONFIG_ARCH_OMAP is not set +-# CONFIG_ARCH_VERSATILE is not set +-# CONFIG_ARCH_IMX is not set +-# CONFIG_ARCH_H720X is not set + + # + # SA11x0 Implementations +@@ -109,11 +152,14 @@ + CONFIG_CPU_CACHE_V4WB=y + CONFIG_CPU_CACHE_VIVT=y + CONFIG_CPU_TLB_V4WB=y +-CONFIG_CPU_MINICACHE=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y + + # + # Processor Features + # ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set + + # + # Bus support +@@ -126,6 +172,8 @@ + CONFIG_PCCARD=y + # CONFIG_PCMCIA_DEBUG is not set + CONFIG_PCMCIA=y ++CONFIG_PCMCIA_LOAD_CIS=y ++CONFIG_PCMCIA_IOCTL=y + + # + # PC-card bridges +@@ -138,7 +186,21 @@ + # Kernel Features + # + CONFIG_PREEMPT=y ++# CONFIG_NO_IDLE_HZ is not set ++CONFIG_HZ=100 ++# CONFIG_AEABI is not set ++CONFIG_ARCH_DISCONTIGMEM_ENABLE=y ++CONFIG_NODES_SHIFT=2 ++CONFIG_SELECT_MEMORY_MODEL=y ++# CONFIG_FLATMEM_MANUAL is not set ++CONFIG_DISCONTIGMEM_MANUAL=y ++# CONFIG_SPARSEMEM_MANUAL is not set + CONFIG_DISCONTIGMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_NEED_MULTIPLE_NODES=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set + CONFIG_LEDS=y + CONFIG_LEDS_TIMER=y + # CONFIG_LEDS_CPU is not set +@@ -181,9 +243,161 @@ + # + CONFIG_PM=y + # CONFIG_PM_LEGACY is not set ++# CONFIG_PM_DEBUG is not set ++# CONFIG_PM_SYSFS_DEPRECATED is not set + CONFIG_APM=y + + # ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++CONFIG_IRDA=m ++ ++# ++# IrDA protocols ++# ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++# CONFIG_IRDA_ULTRA is not set ++ ++# ++# IrDA options ++# ++# CONFIG_IRDA_CACHE_LAST_LSAP is not set ++# CONFIG_IRDA_FAST_RR is not set ++# CONFIG_IRDA_DEBUG is not set ++ ++# ++# Infrared-port device drivers ++# ++ ++# ++# SIR device drivers ++# ++CONFIG_IRTTY_SIR=m ++ ++# ++# Dongle support ++# ++# CONFIG_DONGLE is not set ++ ++# ++# Old SIR device drivers ++# ++CONFIG_IRPORT_SIR=m ++ ++# ++# Old Serial dongle support ++# ++# CONFIG_DONGLE_OLD is not set ++ ++# ++# FIR device drivers ++# ++CONFIG_SA1100_FIR=m ++CONFIG_BT=m ++CONFIG_BT_L2CAP=m ++CONFIG_BT_SCO=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++# CONFIG_BT_HIDP is not set ++ ++# ++# Bluetooth device drivers ++# ++# CONFIG_BT_HCIUART is not set ++# CONFIG_BT_HCIDTL1 is not set ++# CONFIG_BT_HCIBT3C is not set ++# CONFIG_BT_HCIBLUECARD is not set ++# CONFIG_BT_HCIBTUART is not set ++# CONFIG_BT_HCIVHCI is not set ++# CONFIG_IEEE80211 is not set ++CONFIG_WIRELESS_EXT=y ++ ++# + # Device Drivers + # + +@@ -192,8 +406,14 @@ + # + CONFIG_STANDALONE=y + CONFIG_PREVENT_FIRMWARE_BUILD=y +-CONFIG_FW_LOADER=m ++CONFIG_FW_LOADER=y + # CONFIG_DEBUG_DRIVER is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set + + # + # Memory Technology Devices (MTD) +@@ -214,6 +434,8 @@ + # CONFIG_FTL is not set + # CONFIG_NFTL is not set + # CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set + + # + # RAM/ROM/Flash chip drivers +@@ -236,6 +458,7 @@ + # CONFIG_MTD_CFI_I2 is not set + # CONFIG_MTD_CFI_I4 is not set + # CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_OTP is not set + CONFIG_MTD_CFI_INTELEXT=y + # CONFIG_MTD_CFI_AMDSTD is not set + # CONFIG_MTD_CFI_STAA is not set +@@ -243,6 +466,7 @@ + CONFIG_MTD_RAM=y + # CONFIG_MTD_ROM is not set + # CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set + # CONFIG_MTD_XIP is not set + + # +@@ -252,8 +476,8 @@ + # CONFIG_MTD_PHYSMAP is not set + # CONFIG_MTD_ARM_INTEGRATOR is not set + CONFIG_MTD_SA1100=y +-# CONFIG_MTD_EDB7312 is not set + # CONFIG_MTD_IMPA7 is not set ++# CONFIG_MTD_PLATRAM is not set + + # + # Self-contained MTD device drivers +@@ -261,7 +485,6 @@ + # CONFIG_MTD_SLRAM is not set + # CONFIG_MTD_PHRAM is not set + # CONFIG_MTD_MTDRAM is not set +-# CONFIG_MTD_BLKMTD is not set + # CONFIG_MTD_BLOCK2MTD is not set + + # +@@ -277,6 +500,11 @@ + # CONFIG_MTD_NAND is not set + + # ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set ++ ++# + # Parallel port support + # + # CONFIG_PARPORT is not set +@@ -289,8 +517,6 @@ + # + # Block devices + # +-# CONFIG_BLK_DEV_FD is not set +-# CONFIG_BLK_DEV_XD is not set + # CONFIG_BLK_DEV_COW_COMMON is not set + CONFIG_BLK_DEV_LOOP=m + # CONFIG_BLK_DEV_CRYPTOLOOP is not set +@@ -298,16 +524,9 @@ + CONFIG_BLK_DEV_RAM=m + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=8192 +-CONFIG_INITRAMFS_SOURCE="" ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_BLK_DEV_INITRD is not set + # CONFIG_CDROM_PKTCDVD is not set +- +-# +-# IO Schedulers +-# +-CONFIG_IOSCHED_NOOP=y +-CONFIG_IOSCHED_AS=y +-CONFIG_IOSCHED_DEADLINE=y +-CONFIG_IOSCHED_CFQ=y + # CONFIG_ATA_OVER_ETH is not set + + # +@@ -318,7 +537,14 @@ + # + # SCSI device support + # ++# CONFIG_RAID_ATTRS is not set + # CONFIG_SCSI is not set ++# CONFIG_SCSI_NETLINK is not set ++ ++# ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++# CONFIG_ATA is not set + + # + # Multi-device support (RAID and LVM) +@@ -328,6 +554,7 @@ + # + # Fusion MPT device support + # ++# CONFIG_FUSION is not set + + # + # IEEE 1394 (FireWire) support +@@ -338,136 +565,8 @@ + # + + # +-# Networking support +-# +-CONFIG_NET=y +- +-# +-# Networking options +-# +-CONFIG_PACKET=y +-CONFIG_PACKET_MMAP=y +-# CONFIG_NETLINK_DEV is not set +-CONFIG_UNIX=y +-# CONFIG_NET_KEY is not set +-CONFIG_INET=y +-# CONFIG_IP_MULTICAST is not set +-# CONFIG_IP_ADVANCED_ROUTER is not set +-CONFIG_IP_PNP=y +-CONFIG_IP_PNP_DHCP=y +-CONFIG_IP_PNP_BOOTP=y +-# CONFIG_IP_PNP_RARP is not set +-# CONFIG_NET_IPIP is not set +-# CONFIG_NET_IPGRE is not set +-# CONFIG_ARPD is not set +-# CONFIG_SYN_COOKIES is not set +-# CONFIG_INET_AH is not set +-# CONFIG_INET_ESP is not set +-# CONFIG_INET_IPCOMP is not set +-# CONFIG_INET_TUNNEL is not set +-# CONFIG_IP_TCPDIAG is not set +-# CONFIG_IP_TCPDIAG_IPV6 is not set +-# CONFIG_IPV6 is not set +-# CONFIG_NETFILTER is not set +- +-# +-# SCTP Configuration (EXPERIMENTAL) +-# +-# CONFIG_IP_SCTP is not set +-# CONFIG_ATM is not set +-# CONFIG_BRIDGE is not set +-# CONFIG_VLAN_8021Q is not set +-# CONFIG_DECNET is not set +-# CONFIG_LLC2 is not set +-# CONFIG_IPX is not set +-# CONFIG_ATALK is not set +-# CONFIG_X25 is not set +-# CONFIG_LAPB is not set +-# CONFIG_NET_DIVERT is not set +-# CONFIG_ECONET is not set +-# CONFIG_WAN_ROUTER is not set +- +-# +-# QoS and/or fair queueing +-# +-# CONFIG_NET_SCHED is not set +-# CONFIG_NET_CLS_ROUTE is not set +- +-# +-# Network testing +-# +-# CONFIG_NET_PKTGEN is not set +-# CONFIG_NETPOLL is not set +-# CONFIG_NET_POLL_CONTROLLER is not set +-# CONFIG_HAMRADIO is not set +-CONFIG_IRDA=m +- +-# +-# IrDA protocols +-# +-CONFIG_IRLAN=m +-CONFIG_IRNET=m +-CONFIG_IRCOMM=m +-# CONFIG_IRDA_ULTRA is not set +- +-# +-# IrDA options +-# +-# CONFIG_IRDA_CACHE_LAST_LSAP is not set +-# CONFIG_IRDA_FAST_RR is not set +-# CONFIG_IRDA_DEBUG is not set +- +-# +-# Infrared-port device drivers +-# +- ++# Network device support + # +-# SIR device drivers +-# +-CONFIG_IRTTY_SIR=m +- +-# +-# Dongle support +-# +-# CONFIG_DONGLE is not set +- +-# +-# Old SIR device drivers +-# +-CONFIG_IRPORT_SIR=m +- +-# +-# Old Serial dongle support +-# +-# CONFIG_DONGLE_OLD is not set +- +-# +-# FIR device drivers +-# +-# CONFIG_NSC_FIR is not set +-# CONFIG_WINBOND_FIR is not set +-# CONFIG_SMC_IRCC_FIR is not set +-# CONFIG_ALI_FIR is not set +-CONFIG_SA1100_FIR=m +-CONFIG_BT=m +-CONFIG_BT_L2CAP=m +-CONFIG_BT_SCO=m +-CONFIG_BT_RFCOMM=m +-CONFIG_BT_RFCOMM_TTY=y +-CONFIG_BT_BNEP=m +-CONFIG_BT_BNEP_MC_FILTER=y +-CONFIG_BT_BNEP_PROTO_FILTER=y +-# CONFIG_BT_HIDP is not set +- +-# +-# Bluetooth device drivers +-# +-# CONFIG_BT_HCIUART is not set +-# CONFIG_BT_HCIDTL1 is not set +-# CONFIG_BT_HCIBT3C is not set +-# CONFIG_BT_HCIBLUECARD is not set +-# CONFIG_BT_HCIBTUART is not set +-# CONFIG_BT_HCIVHCI is not set + CONFIG_NETDEVICES=y + CONFIG_DUMMY=y + # CONFIG_BONDING is not set +@@ -480,14 +579,19 @@ + # CONFIG_ARCNET is not set + + # ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# + # Ethernet (10 or 100Mbit) + # + CONFIG_NET_ETHERNET=y + CONFIG_MII=m + # CONFIG_NET_VENDOR_3COM is not set +-# CONFIG_LANCE is not set + # CONFIG_NET_VENDOR_SMC is not set + # CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set + # CONFIG_NET_VENDOR_RACAL is not set + # CONFIG_AT1700 is not set + # CONFIG_DEPCA is not set +@@ -497,7 +601,6 @@ + # CONFIG_AC3200 is not set + # CONFIG_APRICOT is not set + # CONFIG_CS89x0 is not set +-# CONFIG_NET_POCKET is not set + + # + # Ethernet (1000 Mbit) +@@ -516,6 +619,7 @@ + # Wireless LAN (non-hamradio) + # + CONFIG_NET_RADIO=y ++# CONFIG_NET_WIRELESS_RTNETLINK is not set + + # + # Obsolete Wireless cards support (pre-802.11) +@@ -542,6 +646,7 @@ + # + # CONFIG_AIRO_CS is not set + # CONFIG_PCMCIA_WL3501 is not set ++# CONFIG_HOSTAP is not set + CONFIG_NET_WIRELESS=y + + # +@@ -568,10 +673,14 @@ + CONFIG_PPP_SYNC_TTY=m + CONFIG_PPP_DEFLATE=m + CONFIG_PPP_BSDCOMP=m ++# CONFIG_PPP_MPPE is not set + CONFIG_PPPOE=m + # CONFIG_SLIP is not set ++CONFIG_SLHC=m + # CONFIG_SHAPER is not set + # CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set + + # + # ISDN subsystem +@@ -582,6 +691,7 @@ + # Input device support + # + CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set + + # + # Userland interfaces +@@ -614,7 +724,6 @@ + # CONFIG_SERIO_LIBPS2 is not set + # CONFIG_SERIO_RAW is not set + # CONFIG_GAMEPORT is not set +-CONFIG_SOUND_GAMEPORT=y + + # + # Character devices +@@ -622,6 +731,7 @@ + CONFIG_VT=y + CONFIG_VT_CONSOLE=y + CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set + # CONFIG_SERIAL_NONSTANDARD is not set + + # +@@ -649,20 +759,21 @@ + # Watchdog Cards + # + # CONFIG_WATCHDOG is not set ++CONFIG_HW_RANDOM=y + # CONFIG_NVRAM is not set +-# CONFIG_RTC is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + + # + # Ftape, the floppy tape device driver + # +-# CONFIG_DRM is not set + + # + # PCMCIA character devices + # + # CONFIG_SYNCLINK_CS is not set ++# CONFIG_CARDMAN_4000 is not set ++# CONFIG_CARDMAN_4040 is not set + # CONFIG_RAW_DRIVER is not set + + # +@@ -676,8 +787,48 @@ + # CONFIG_I2C is not set + + # ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_ABITUGURU is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++ ++# + # Misc devices + # ++# CONFIG_TIFM_CORE is not set ++ ++# ++# Multimedia Capabilities Port drivers ++# ++# CONFIG_MCP_SA11X0 is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# + + # + # Multimedia devices +@@ -692,14 +843,18 @@ + # + # Graphics support + # ++CONFIG_FIRMWARE_EDID=y + CONFIG_FB=y +-# CONFIG_FB_CFB_FILLRECT is not set +-# CONFIG_FB_CFB_COPYAREA is not set +-# CONFIG_FB_CFB_IMAGEBLIT is not set +-# CONFIG_FB_SOFT_CURSOR is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set + # CONFIG_FB_MODE_HELPERS is not set + # CONFIG_FB_TILEBLITTING is not set + # CONFIG_FB_SA1100 is not set ++# CONFIG_FB_S1D13XXX is not set ++CONFIG_FB_MQ200=y + # CONFIG_FB_VIRTUAL is not set + + # +@@ -709,6 +864,7 @@ + # CONFIG_MDA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y + CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set + # CONFIG_FONTS is not set + CONFIG_FONT_8x8=y + CONFIG_FONT_8x16=y +@@ -742,9 +898,14 @@ + # + CONFIG_USB_ARCH_HAS_HCD=y + # CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set + # CONFIG_USB is not set + + # ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# + # USB Gadget Support + # + # CONFIG_USB_GADGET is not set +@@ -755,14 +916,22 @@ + # CONFIG_MMC is not set + + # ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++ ++# + # File systems + # + CONFIG_EXT2_FS=m + # CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set + CONFIG_EXT3_FS=m + CONFIG_EXT3_FS_XATTR=y + # CONFIG_EXT3_FS_POSIX_ACL is not set + # CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set + CONFIG_JBD=m + # CONFIG_JBD_DEBUG is not set + CONFIG_FS_MBCACHE=m +@@ -771,17 +940,19 @@ + CONFIG_REISERFS_PROC_INFO=y + # CONFIG_REISERFS_FS_XATTR is not set + # CONFIG_JFS_FS is not set +- +-# +-# XFS support +-# ++# CONFIG_FS_POSIX_ACL is not set + # CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set + # CONFIG_MINIX_FS is not set + # CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y + # CONFIG_QUOTA is not set + CONFIG_DNOTIFY=y + # CONFIG_AUTOFS_FS is not set + # CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set + + # + # CD-ROM/DVD Filesystems +@@ -803,14 +974,12 @@ + # Pseudo filesystems + # + CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y + CONFIG_SYSFS=y +-CONFIG_DEVFS_FS=y +-CONFIG_DEVFS_MOUNT=y +-# CONFIG_DEVFS_DEBUG is not set +-# CONFIG_DEVPTS_FS_XATTR is not set + # CONFIG_TMPFS is not set + # CONFIG_HUGETLB_PAGE is not set + CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set + + # + # Miscellaneous filesystems +@@ -827,8 +996,9 @@ + # CONFIG_JFFS_PROC_FS is not set + CONFIG_JFFS2_FS=y + CONFIG_JFFS2_FS_DEBUG=0 +-# CONFIG_JFFS2_FS_NAND is not set +-# CONFIG_JFFS2_FS_NOR_ECC is not set ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set + # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set + CONFIG_JFFS2_ZLIB=y + CONFIG_JFFS2_RTIME=y +@@ -845,12 +1015,14 @@ + # + CONFIG_NFS_FS=y + CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set + # CONFIG_NFS_V4 is not set + # CONFIG_NFS_DIRECTIO is not set + # CONFIG_NFSD is not set + # CONFIG_ROOT_NFS is not set + CONFIG_LOCKD=y + CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y + CONFIG_SUNRPC=y + # CONFIG_RPCSEC_GSS_KRB5 is not set + # CONFIG_RPCSEC_GSS_SPKM3 is not set +@@ -860,6 +1032,7 @@ + # CONFIG_NCP_FS is not set + # CONFIG_CODA_FS is not set + # CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set + + # + # Partition Types +@@ -920,19 +1093,32 @@ + # Kernel hacking + # + # CONFIG_PRINTK_TIME is not set +-CONFIG_DEBUG_KERNEL=y ++CONFIG_ENABLE_MUST_CHECK=y + # CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_KERNEL=y + CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_DETECT_SOFTLOCKUP=y + # CONFIG_SCHEDSTATS is not set + # CONFIG_DEBUG_SLAB is not set + CONFIG_DEBUG_PREEMPT=y ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_RWSEMS is not set + # CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set + # CONFIG_DEBUG_KOBJECT is not set + CONFIG_DEBUG_BUGVERBOSE=y + # CONFIG_DEBUG_INFO is not set + # CONFIG_DEBUG_FS is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set + CONFIG_FRAME_POINTER=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_HEADERS_CHECK is not set ++# CONFIG_RCU_TORTURE_TEST is not set + CONFIG_DEBUG_USER=y + CONFIG_DEBUG_ERRORS=y + CONFIG_DEBUG_LL=y +@@ -950,14 +1136,12 @@ + # CONFIG_CRYPTO is not set + + # +-# Hardware crypto devices +-# +- +-# + # Library routines + # + CONFIG_CRC_CCITT=m ++# CONFIG_CRC16 is not set + CONFIG_CRC32=y + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y + CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y +diff -uNr linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig~ linux-2.6.20/arch/arm/configs/simpad_defconfig~ +--- linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig~ 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/arch/arm/configs/simpad_defconfig~ 2007-02-11 16:35:19.000000000 +0100 +@@ -0,0 +1,963 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.12-rc1-bk2 ++# Mon Mar 28 00:10:36 2005 ++# ++CONFIG_ARM=y ++CONFIG_MMU=y ++CONFIG_UID16=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_IOMAP=y ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_CLEAN_COMPILE=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_LOCK_KERNEL=y ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="oe1" ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++CONFIG_SYSCTL=y ++# CONFIG_AUDIT is not set ++CONFIG_HOTPLUG=y ++CONFIG_KOBJECT_UEVENT=y ++# CONFIG_IKCONFIG is not set ++CONFIG_EMBEDDED=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SHMEM=y ++CONFIG_CC_ALIGN_FUNCTIONS=0 ++CONFIG_CC_ALIGN_LABELS=0 ++CONFIG_CC_ALIGN_LOOPS=0 ++CONFIG_CC_ALIGN_JUMPS=0 ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++# CONFIG_MODULE_UNLOAD is not set ++CONFIG_OBSOLETE_MODPARM=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# System Type ++# ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_IOP3XX is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++CONFIG_ARCH_SA1100=y ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_H720X is not set ++ ++# ++# SA11x0 Implementations ++# ++# CONFIG_SA1100_ASSABET is not set ++# CONFIG_SA1100_CERF is not set ++# CONFIG_SA1100_COLLIE is not set ++# CONFIG_SA1100_H3100 is not set ++# CONFIG_SA1100_H3600 is not set ++# CONFIG_SA1100_H3800 is not set ++# CONFIG_SA1100_BADGE4 is not set ++# CONFIG_SA1100_JORNADA720 is not set ++# CONFIG_SA1100_HACKKIT is not set ++# CONFIG_SA1100_LART is not set ++# CONFIG_SA1100_PLEB is not set ++# CONFIG_SA1100_SHANNON is not set ++CONFIG_SA1100_SIMPAD=y ++# CONFIG_SA1100_SSP is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_SA1100=y ++CONFIG_CPU_32v4=y ++CONFIG_CPU_ABRT_EV4=y ++CONFIG_CPU_CACHE_V4WB=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_TLB_V4WB=y ++CONFIG_CPU_MINICACHE=y ++ ++# ++# Processor Features ++# ++ ++# ++# Bus support ++# ++CONFIG_ISA=y ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++CONFIG_PCCARD=y ++# CONFIG_PCMCIA_DEBUG is not set ++CONFIG_PCMCIA=y ++ ++# ++# PC-card bridges ++# ++# CONFIG_I82365 is not set ++# CONFIG_TCIC is not set ++CONFIG_PCMCIA_SA1100=y ++ ++# ++# Kernel Features ++# ++CONFIG_PREEMPT=y ++CONFIG_DISCONTIGMEM=y ++CONFIG_LEDS=y ++CONFIG_LEDS_TIMER=y ++# CONFIG_LEDS_CPU is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2" ++# CONFIG_XIP_KERNEL is not set ++ ++# ++# CPU Frequency scaling ++# ++# CONFIG_CPU_FREQ is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=m ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_LEGACY is not set ++CONFIG_APM=y ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=m ++# CONFIG_DEBUG_DRIVER is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++CONFIG_MTD_JEDECPROBE=y ++CONFIG_MTD_GEN_PROBE=y ++CONFIG_MTD_CFI_ADV_OPTIONS=y ++CONFIG_MTD_CFI_NOSWAP=y ++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set ++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set ++CONFIG_MTD_CFI_GEOMETRY=y ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++# CONFIG_MTD_CFI_I2 is not set ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++CONFIG_MTD_RAM=y ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_XIP is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++CONFIG_MTD_SA1100=y ++# CONFIG_MTD_EDB7312 is not set ++# CONFIG_MTD_IMPA7 is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLKMTD is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++# CONFIG_MTD_NAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++# CONFIG_PNP is not set ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_FD is not set ++# CONFIG_BLK_DEV_XD is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=m ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++CONFIG_INITRAMFS_SOURCE="" ++# CONFIG_CDROM_PKTCDVD is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# ATA/ATAPI/MFM/RLL support ++# ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_SCSI is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++ ++# ++# IEEE 1394 (FireWire) support ++# ++ ++# ++# I2O device support ++# ++ ++# ++# Networking support ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++# CONFIG_NETLINK_DEV is not set ++CONFIG_UNIX=y ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_TUNNEL is not set ++# CONFIG_IP_TCPDIAG is not set ++# CONFIG_IP_TCPDIAG_IPV6 is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_NET_DIVERT is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++# CONFIG_NET_CLS_ROUTE is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_HAMRADIO is not set ++CONFIG_IRDA=m ++ ++# ++# IrDA protocols ++# ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++# CONFIG_IRDA_ULTRA is not set ++ ++# ++# IrDA options ++# ++# CONFIG_IRDA_CACHE_LAST_LSAP is not set ++# CONFIG_IRDA_FAST_RR is not set ++# CONFIG_IRDA_DEBUG is not set ++ ++# ++# Infrared-port device drivers ++# ++ ++# ++# SIR device drivers ++# ++CONFIG_IRTTY_SIR=m ++ ++# ++# Dongle support ++# ++# CONFIG_DONGLE is not set ++ ++# ++# Old SIR device drivers ++# ++CONFIG_IRPORT_SIR=m ++ ++# ++# Old Serial dongle support ++# ++# CONFIG_DONGLE_OLD is not set ++ ++# ++# FIR device drivers ++# ++# CONFIG_NSC_FIR is not set ++# CONFIG_WINBOND_FIR is not set ++# CONFIG_SMC_IRCC_FIR is not set ++# CONFIG_ALI_FIR is not set ++CONFIG_SA1100_FIR=m ++CONFIG_BT=m ++CONFIG_BT_L2CAP=m ++CONFIG_BT_SCO=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++# CONFIG_BT_HIDP is not set ++ ++# ++# Bluetooth device drivers ++# ++# CONFIG_BT_HCIUART is not set ++# CONFIG_BT_HCIDTL1 is not set ++# CONFIG_BT_HCIBT3C is not set ++# CONFIG_BT_HCIBLUECARD is not set ++# CONFIG_BT_HCIBTUART is not set ++# CONFIG_BT_HCIVHCI is not set ++CONFIG_NETDEVICES=y ++CONFIG_DUMMY=y ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++ ++# ++# ARCnet devices ++# ++# CONFIG_ARCNET is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=m ++# CONFIG_NET_VENDOR_3COM is not set ++# CONFIG_LANCE is not set ++# CONFIG_NET_VENDOR_SMC is not set ++# CONFIG_SMC91X is not set ++# CONFIG_NET_VENDOR_RACAL is not set ++# CONFIG_AT1700 is not set ++# CONFIG_DEPCA is not set ++# CONFIG_HP100 is not set ++# CONFIG_NET_ISA is not set ++CONFIG_NET_PCI=y ++# CONFIG_AC3200 is not set ++# CONFIG_APRICOT is not set ++# CONFIG_CS89x0 is not set ++# CONFIG_NET_POCKET is not set ++ ++# ++# Ethernet (1000 Mbit) ++# ++ ++# ++# Ethernet (10000 Mbit) ++# ++ ++# ++# Token Ring devices ++# ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN (non-hamradio) ++# ++CONFIG_NET_RADIO=y ++ ++# ++# Obsolete Wireless cards support (pre-802.11) ++# ++# CONFIG_STRIP is not set ++# CONFIG_ARLAN is not set ++# CONFIG_WAVELAN is not set ++CONFIG_PCMCIA_WAVELAN=m ++# CONFIG_PCMCIA_NETWAVE is not set ++ ++# ++# Wireless 802.11 Frequency Hopping cards support ++# ++# CONFIG_PCMCIA_RAYCS is not set ++ ++# ++# Wireless 802.11b ISA/PCI cards support ++# ++# CONFIG_HERMES is not set ++# CONFIG_ATMEL is not set ++ ++# ++# Wireless 802.11b Pcmcia/Cardbus cards support ++# ++# CONFIG_AIRO_CS is not set ++# CONFIG_PCMCIA_WL3501 is not set ++CONFIG_NET_WIRELESS=y ++ ++# ++# PCMCIA network device support ++# ++CONFIG_NET_PCMCIA=y ++CONFIG_PCMCIA_3C589=m ++CONFIG_PCMCIA_3C574=m ++# CONFIG_PCMCIA_FMVJ18X is not set ++CONFIG_PCMCIA_PCNET=m ++# CONFIG_PCMCIA_NMCLAN is not set ++CONFIG_PCMCIA_SMC91C92=m ++CONFIG_PCMCIA_XIRC2PS=m ++# CONFIG_PCMCIA_AXNET is not set ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++CONFIG_PPP=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPPOE=m ++# CONFIG_SLIP is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=800 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_TSDEV=y ++CONFIG_INPUT_TSDEV_SCREEN_X=800 ++CONFIG_INPUT_TSDEV_SCREEN_Y=600 ++CONFIG_INPUT_EVDEV=m ++CONFIG_INPUT_EVBUG=y ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=m ++CONFIG_SERIO_SERPORT=m ++# CONFIG_SERIO_LIBPS2 is not set ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++CONFIG_SOUND_GAMEPORT=y ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SA1100=y ++CONFIG_SERIAL_SA1100_CONSOLE=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++# CONFIG_WATCHDOG is not set ++# CONFIG_NVRAM is not set ++# CONFIG_RTC is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++ ++# ++# Ftape, the floppy tape device driver ++# ++# CONFIG_DRM is not set ++ ++# ++# PCMCIA character devices ++# ++# CONFIG_SYNCLINK_CS is not set ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++# CONFIG_I2C is not set ++ ++# ++# Misc devices ++# ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++ ++# ++# Graphics support ++# ++CONFIG_FB=y ++# CONFIG_FB_CFB_FILLRECT is not set ++# CONFIG_FB_CFB_COPYAREA is not set ++# CONFIG_FB_CFB_IMAGEBLIT is not set ++# CONFIG_FB_SOFT_CURSOR is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++# CONFIG_FB_SA1100 is not set ++# CONFIG_FB_VIRTUAL is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++# CONFIG_MDA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++ ++# ++# Logo configuration ++# ++CONFIG_LOGO=y ++CONFIG_LOGO_LINUX_MONO=y ++CONFIG_LOGO_LINUX_VGA16=y ++CONFIG_LOGO_LINUX_CLUT224=y ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Sound ++# ++CONFIG_SOUND=y ++ ++# ++# Advanced Linux Sound Architecture ++# ++# CONFIG_SND is not set ++ ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB is not set ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++# CONFIG_MMC is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=m ++# CONFIG_EXT2_FS_XATTR is not set ++CONFIG_EXT3_FS=m ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++CONFIG_JBD=m ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=m ++CONFIG_REISERFS_FS=m ++# CONFIG_REISERFS_CHECK is not set ++CONFIG_REISERFS_PROC_INFO=y ++# CONFIG_REISERFS_FS_XATTR is not set ++# CONFIG_JFS_FS is not set ++ ++# ++# XFS support ++# ++# CONFIG_XFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_SYSFS=y ++CONFIG_DEVFS_FS=y ++CONFIG_DEVFS_MOUNT=y ++# CONFIG_DEVFS_DEBUG is not set ++# CONFIG_DEVPTS_FS_XATTR is not set ++# CONFIG_TMPFS is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS_FS=m ++CONFIG_JFFS_FS_VERBOSE=0 ++# CONFIG_JFFS_PROC_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++# CONFIG_JFFS2_FS_NAND is not set ++# CONFIG_JFFS2_FS_NOR_ECC is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=m ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++# CONFIG_ROOT_NFS is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_SUNRPC=y ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++CONFIG_SMB_FS=m ++# CONFIG_SMB_NLS_DEFAULT is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++CONFIG_NLS_CODEPAGE_850=y ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++CONFIG_NLS_ISO8859_15=y ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_MAGIC_SYSRQ is not set ++CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_DEBUG_SLAB is not set ++CONFIG_DEBUG_PREEMPT=y ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_FS is not set ++CONFIG_FRAME_POINTER=y ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++# CONFIG_CRYPTO is not set ++ ++# ++# Hardware crypto devices ++# ++ ++# ++# Library routines ++# ++CONFIG_CRC_CCITT=m ++CONFIG_CRC32=y ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y +diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig linux-2.6.20/drivers/video/Kconfig +--- linux-2.6.20.vanilla/drivers/video/Kconfig 2007-02-10 19:02:14.000000000 +0100 ++++ linux-2.6.20/drivers/video/Kconfig 2007-02-11 16:39:54.000000000 +0100 +@@ -1147,6 +1147,18 @@ + help + If you have a S3 Trio say Y. Say N for S3 Virge. + ++config FB_MQ200 ++ bool "MQ200 Driver" ++ depends on (FB = y) && ARM && ARCH_SA1100 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is a MQ200 driver tested only on Simens SIMpads. You may need to ++ boot your SIMpad with a 2.4 SIMpad Kernel first in order to use this ++ driver. This is also needed if the SIMpad lost his power ++ connection (empty accu or accu disconnect). ++ + config FB_SAVAGE + tristate "S3 Savage support" + depends on FB && PCI && EXPERIMENTAL +diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig~ linux-2.6.20/drivers/video/Kconfig~ +--- linux-2.6.20.vanilla/drivers/video/Kconfig~ 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/drivers/video/Kconfig~ 2007-02-11 16:36:10.000000000 +0100 +@@ -0,0 +1,1662 @@ ++# ++# Video configuration ++# ++ ++menu "Graphics support" ++ ++config FIRMWARE_EDID ++ bool "Enable firmware EDID" ++ default y ++ ---help--- ++ This enables access to the EDID transferred from the firmware. ++ On the i386, this is from the Video BIOS. Enable this if DDC/I2C ++ transfers do not work for your driver and if you are using ++ nvidiafb, i810fb or savagefb. ++ ++ In general, choosing Y for this option is safe. If you ++ experience extremely long delays while booting before you get ++ something on your display, try setting this to N. Matrox cards in ++ combination with certain motherboards and monitors are known to ++ suffer from this problem. ++ ++config FB ++ tristate "Support for frame buffer devices" ++ ---help--- ++ The frame buffer device provides an abstraction for the graphics ++ hardware. It represents the frame buffer of some video hardware and ++ allows application software to access the graphics hardware through ++ a well-defined interface, so the software doesn't need to know ++ anything about the low-level (hardware register) stuff. ++ ++ Frame buffer devices work identically across the different ++ architectures supported by Linux and make the implementation of ++ application programs easier and more portable; at this point, an X ++ server exists which uses the frame buffer device exclusively. ++ On several non-X86 architectures, the frame buffer device is the ++ only way to use the graphics hardware. ++ ++ The device is accessed through special device nodes, usually located ++ in the /dev directory, i.e. /dev/fb*. ++ ++ You need an utility program called fbset to make full use of frame ++ buffer devices. Please read <file:Documentation/fb/framebuffer.txt> ++ and the Framebuffer-HOWTO at ++ <http://www.tahallah.demon.co.uk/programming/prog.html> for more ++ information. ++ ++ Say Y here and to the driver for your graphics board below if you ++ are compiling a kernel for a non-x86 architecture. ++ ++ If you are compiling for the x86 architecture, you can say Y if you ++ want to play with it, but it is not essential. Please note that ++ running graphical applications that directly touch the hardware ++ (e.g. an accelerated X server) and that are not frame buffer ++ device-aware may cause unexpected results. If unsure, say N. ++ ++config FB_DDC ++ tristate ++ depends on FB && I2C && I2C_ALGOBIT ++ default n ++ ++config FB_CFB_FILLRECT ++ tristate ++ depends on FB ++ default n ++ ---help--- ++ Include the cfb_fillrect function for generic software rectangle ++ filling. This is used by drivers that don't provide their own ++ (accelerated) version. ++ ++config FB_CFB_COPYAREA ++ tristate ++ depends on FB ++ default n ++ ---help--- ++ Include the cfb_copyarea function for generic software area copying. ++ This is used by drivers that don't provide their own (accelerated) ++ version. ++ ++config FB_CFB_IMAGEBLIT ++ tristate ++ depends on FB ++ default n ++ ---help--- ++ Include the cfb_imageblit function for generic software image ++ blitting. This is used by drivers that don't provide their own ++ (accelerated) version. ++ ++config FB_MACMODES ++ tristate ++ depends on FB ++ default n ++ ++config FB_BACKLIGHT ++ bool ++ depends on FB ++ select BACKLIGHT_LCD_SUPPORT ++ select BACKLIGHT_CLASS_DEVICE ++ default n ++ ++config FB_MODE_HELPERS ++ bool "Enable Video Mode Handling Helpers" ++ depends on FB ++ default n ++ ---help--- ++ This enables functions for handling video modes using the ++ Generalized Timing Formula and the EDID parser. A few drivers rely ++ on this feature such as the radeonfb, rivafb, and the i810fb. If ++ your driver does not take advantage of this feature, choosing Y will ++ just increase the kernel size by about 5K. ++ ++config FB_TILEBLITTING ++ bool "Enable Tile Blitting Support" ++ depends on FB ++ default n ++ ---help--- ++ This enables tile blitting. Tile blitting is a drawing technique ++ where the screen is divided into rectangular sections (tiles), whereas ++ the standard blitting divides the screen into pixels. Because the ++ default drawing element is a tile, drawing functions will be passed ++ parameters in terms of number of tiles instead of number of pixels. ++ For example, to draw a single character, instead of using bitmaps, ++ an index to an array of bitmaps will be used. To clear or move a ++ rectangular section of a screen, the rectangle will be described in ++ terms of number of tiles in the x- and y-axis. ++ ++ This is particularly important to one driver, matroxfb. If ++ unsure, say N. ++ ++config FB_CIRRUS ++ tristate "Cirrus Logic support" ++ depends on FB && (ZORRO || PCI) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ This enables support for Cirrus Logic GD542x/543x based boards on ++ Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. ++ ++ If you have a PCI-based system, this enables support for these ++ chips: GD-543x, GD-544x, GD-5480. ++ ++ Please read the file <file:Documentation/fb/cirrusfb.txt>. ++ ++ Say N unless you have such a graphics board or plan to get one ++ before you next recompile the kernel. ++ ++config FB_PM2 ++ tristate "Permedia2 support" ++ depends on FB && ((AMIGA && BROKEN) || PCI) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Permedia2 AGP frame ++ buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a ++ product page at ++ <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. ++ ++config FB_PM2_FIFO_DISCONNECT ++ bool "enable FIFO disconnect feature" ++ depends on FB_PM2 && PCI ++ help ++ Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). ++ ++config FB_ARMCLCD ++ tristate "ARM PrimeCell PL110 support" ++ depends on FB && ARM && ARM_AMBA ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This framebuffer device driver is for the ARM PrimeCell PL110 ++ Colour LCD controller. ARM PrimeCells provide the building ++ blocks for System on a Chip devices. ++ ++ If you want to compile this as a module (=code which can be ++ inserted into and removed from the running kernel), say M ++ here and read <file:Documentation/modules.txt>. The module ++ will be called amba-clcd. ++ ++choice ++ ++ depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) ++ prompt "LCD Panel" ++ default FB_ARMCLCD_SHARP_LQ035Q7DB02 ++ ++config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT ++ bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" ++ help ++ This is an implementation of the Sharp LQ035Q7DB02, a 3.5" ++ color QVGA, HRTFT panel. The LogicPD device includes ++ an integrated HRTFT controller IC. ++ The native resolution is 240x320. ++ ++config FB_ARMCLCD_SHARP_LQ057Q3DC02 ++ bool "LogicPD LCD 5.7\" QVGA" ++ help ++ This is an implementation of the Sharp LQ057Q3DC02, a 5.7" ++ color QVGA, TFT panel. The LogicPD device includes an ++ The native resolution is 320x240. ++ ++config FB_ARMCLCD_SHARP_LQ64D343 ++ bool "LogicPD LCD 6.4\" VGA" ++ help ++ This is an implementation of the Sharp LQ64D343, a 6.4" ++ color VGA, TFT panel. The LogicPD device includes an ++ The native resolution is 640x480. ++ ++config FB_ARMCLCD_SHARP_LQ10D368 ++ bool "LogicPD LCD 10.4\" VGA" ++ help ++ This is an implementation of the Sharp LQ10D368, a 10.4" ++ color VGA, TFT panel. The LogicPD device includes an ++ The native resolution is 640x480. ++ ++ ++config FB_ARMCLCD_SHARP_LQ121S1DG41 ++ bool "LogicPD LCD 12.1\" SVGA" ++ help ++ This is an implementation of the Sharp LQ121S1DG41, a 12.1" ++ color SVGA, TFT panel. The LogicPD device includes an ++ The native resolution is 800x600. ++ ++ This panel requires a clock rate may be an integer fraction ++ of the base LCDCLK frequency. The driver will select the ++ highest frequency available that is lower than the maximum ++ allowed. The panel may flicker if the clock rate is ++ slower than the recommended minimum. ++ ++config FB_ARMCLCD_AUO_A070VW01_WIDE ++ bool "AU Optronics A070VW01 LCD 7.0\" WIDE" ++ help ++ This is an implementation of the AU Optronics, a 7.0" ++ WIDE Color. The native resolution is 234x480. ++ ++config FB_ARMCLCD_HITACHI ++ bool "Hitachi Wide Screen 800x480" ++ help ++ This is an implementation of the Hitachi 800x480. ++ ++endchoice ++ ++ ++config FB_ACORN ++ bool "Acorn VIDC support" ++ depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Acorn VIDC graphics ++ hardware found in Acorn RISC PCs and other ARM-based machines. If ++ unsure, say N. ++ ++config FB_CLPS711X ++ bool "CLPS711X LCD support" ++ depends on (FB = y) && ARM && ARCH_CLPS711X ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Say Y to enable the Framebuffer driver for the CLPS7111 and ++ EP7212 processors. ++ ++config FB_SA1100 ++ bool "SA-1100 LCD support" ++ depends on (FB = y) && ARM && ARCH_SA1100 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is a framebuffer device for the SA-1100 LCD Controller. ++ See <http://www.linux-fbdev.org/> for information on framebuffer ++ devices. ++ ++ If you plan to use the LCD display with your SA-1100 system, say ++ Y here. ++ ++config FB_IMX ++ tristate "Motorola i.MX LCD support" ++ depends on FB && ARM && ARCH_IMX ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ++config FB_CYBER2000 ++ tristate "CyberPro 2000/2010/5000 support" ++ depends on FB && PCI && (BROKEN || !SPARC64) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This enables support for the Integraphics CyberPro 20x0 and 5000 ++ VGA chips used in the Rebel.com Netwinder and other machines. ++ Say Y if you have a NetWinder or a graphics card containing this ++ device, otherwise say N. ++ ++config FB_APOLLO ++ bool ++ depends on (FB = y) && APOLLO ++ default y ++ select FB_CFB_FILLRECT ++ select FB_CFB_IMAGEBLIT ++ ++config FB_Q40 ++ bool ++ depends on (FB = y) && Q40 ++ default y ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ++config FB_AMIGA ++ tristate "Amiga native chipset support" ++ depends on FB && AMIGA ++ help ++ This is the frame buffer device driver for the builtin graphics ++ chipset found in Amigas. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called amifb. ++ ++config FB_AMIGA_OCS ++ bool "Amiga OCS chipset support" ++ depends on FB_AMIGA ++ help ++ This enables support for the original Agnus and Denise video chips, ++ found in the Amiga 1000 and most A500's and A2000's. If you intend ++ to run Linux on any of these systems, say Y; otherwise say N. ++ ++config FB_AMIGA_ECS ++ bool "Amiga ECS chipset support" ++ depends on FB_AMIGA ++ help ++ This enables support for the Enhanced Chip Set, found in later ++ A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If ++ you intend to run Linux on any of these systems, say Y; otherwise ++ say N. ++ ++config FB_AMIGA_AGA ++ bool "Amiga AGA chipset support" ++ depends on FB_AMIGA ++ help ++ This enables support for the Advanced Graphics Architecture (also ++ known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T ++ and CD32. If you intend to run Linux on any of these systems, say Y; ++ otherwise say N. ++ ++config FB_CYBER ++ tristate "Amiga CyberVision 64 support" ++ depends on FB && ZORRO && BROKEN ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This enables support for the Cybervision 64 graphics card from ++ Phase5. Please note that its use is not all that intuitive (i.e. if ++ you have any questions, be sure to ask!). Say N unless you have a ++ Cybervision 64 or plan to get one before you next recompile the ++ kernel. Please note that this driver DOES NOT support the ++ Cybervision 64/3D card, as they use incompatible video chips. ++ ++config FB_VIRGE ++ bool "Amiga CyberVision 64/3D support " ++ depends on (FB = y) && ZORRO && BROKEN ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This enables support for the Cybervision 64/3D graphics card from ++ Phase5. Please note that its use is not all that intuitive (i.e. if ++ you have any questions, be sure to ask!). Say N unless you have a ++ Cybervision 64/3D or plan to get one before you next recompile the ++ kernel. Please note that this driver DOES NOT support the older ++ Cybervision 64 card, as they use incompatible video chips. ++ ++config FB_RETINAZ3 ++ tristate "Amiga Retina Z3 support" ++ depends on (FB = y) && ZORRO && BROKEN ++ help ++ This enables support for the Retina Z3 graphics card. Say N unless ++ you have a Retina Z3 or plan to get one before you next recompile ++ the kernel. ++ ++config FB_FM2 ++ bool "Amiga FrameMaster II/Rainbow II support" ++ depends on (FB = y) && ZORRO ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Amiga FrameMaster ++ card from BSC (exhibited 1992 but not shipped as a CBM product). ++ ++config FB_ARC ++ tristate "Arc Monochrome LCD board support" ++ depends on FB && X86 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This enables support for the Arc Monochrome LCD board. The board ++ is based on the KS-108 lcd controller and is typically a matrix ++ of 2*n chips. This driver was tested with a 128x64 panel. This ++ driver supports it for use with x86 SBCs through a 16 bit GPIO ++ interface (8 bit data, 8 bit control). If you anticipate using ++ this driver, say Y or M; otherwise say N. You must specify the ++ GPIO IO address to be used for setting control and data. ++ ++config FB_ATARI ++ bool "Atari native chipset support" ++ depends on (FB = y) && ATARI && BROKEN ++ help ++ This is the frame buffer device driver for the builtin graphics ++ chipset found in Ataris. ++ ++config FB_OF ++ bool "Open Firmware frame buffer device support" ++ depends on (FB = y) && (PPC64 || PPC_OF) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES ++ help ++ Say Y if you want support with Open Firmware for your graphics ++ board. ++ ++config FB_CONTROL ++ bool "Apple \"control\" display support" ++ depends on (FB = y) && PPC_PMAC && PPC32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES ++ help ++ This driver supports a frame buffer for the graphics adapter in the ++ Power Macintosh 7300 and others. ++ ++config FB_PLATINUM ++ bool "Apple \"platinum\" display support" ++ depends on (FB = y) && PPC_PMAC && PPC32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES ++ help ++ This driver supports a frame buffer for the "platinum" graphics ++ adapter in some Power Macintoshes. ++ ++config FB_VALKYRIE ++ bool "Apple \"valkyrie\" display support" ++ depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES ++ help ++ This driver supports a frame buffer for the "valkyrie" graphics ++ adapter in some Power Macintoshes. ++ ++config FB_CT65550 ++ bool "Chips 65550 display support" ++ depends on (FB = y) && PPC32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Chips & Technologies ++ 65550 graphics chip in PowerBooks. ++ ++config FB_ASILIANT ++ bool "Asiliant (Chips) 69000 display support" ++ depends on (FB = y) && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Asiliant 69030 chipset ++ ++config FB_IMSTT ++ bool "IMS Twin Turbo display support" ++ depends on (FB = y) && PCI ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES if PPC ++ help ++ The IMS Twin Turbo is a PCI-based frame buffer card bundled with ++ many Macintosh and compatible computers. ++ ++config FB_VGA16 ++ tristate "VGA 16-color graphics support" ++ depends on FB && (X86 || PPC) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for VGA 16 color graphic ++ cards. Say Y if you have such a card. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called vga16fb. ++ ++config FB_STI ++ tristate "HP STI frame buffer device support" ++ depends on FB && PARISC ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ default y ++ ---help--- ++ STI refers to the HP "Standard Text Interface" which is a set of ++ BIOS routines contained in a ROM chip in HP PA-RISC based machines. ++ Enabling this option will implement the linux framebuffer device ++ using calls to the STI BIOS routines for initialisation. ++ ++ If you enable this option, you will get a planar framebuffer device ++ /dev/fb which will work on the most common HP graphic cards of the ++ NGLE family, including the artist chips (in the 7xx and Bxxx series), ++ HCRX, HCRX24, CRX, CRX24 and VisEG series. ++ ++ It is safe to enable this option, so you should probably say "Y". ++ ++config FB_MAC ++ bool "Generic Macintosh display support" ++ depends on (FB = y) && MAC ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES ++ ++# bool ' Apple DAFB display support' CONFIG_FB_DAFB ++config FB_HP300 ++ bool ++ depends on (FB = y) && HP300 ++ select FB_CFB_FILLRECT ++ select FB_CFB_IMAGEBLIT ++ default y ++ ++config FB_TGA ++ tristate "TGA framebuffer support" ++ depends on FB && ALPHA ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select BITREVERSE ++ help ++ This is the frame buffer device driver for generic TGA graphic ++ cards. Say Y if you have one of those. ++ ++config FB_VESA ++ bool "VESA VGA graphics support" ++ depends on (FB = y) && X86 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select VIDEO_SELECT ++ help ++ This is the frame buffer device driver for generic VESA 2.0 ++ compliant graphic cards. The older VESA 1.2 cards are not supported. ++ You will get a boot time penguin logo at no additional cost. Please ++ read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. ++ ++config FB_IMAC ++ bool "Intel-based Macintosh Framebuffer Support" ++ depends on (FB = y) && X86 && EFI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Intel-based Macintosh ++ ++config FB_HGA ++ tristate "Hercules mono graphics support" ++ depends on FB && X86 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Say Y here if you have a Hercules mono graphics card. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called hgafb. ++ ++ As this card technology is 15 years old, most people will answer N ++ here. ++ ++config FB_HGA_ACCEL ++ bool "Hercules mono Acceleration functions (EXPERIMENTAL)" ++ depends on FB_HGA && EXPERIMENTAL ++ ---help--- ++ This will compile the Hercules mono graphics with ++ acceleration functions. ++ ++config FB_SGIVW ++ tristate "SGI Visual Workstation framebuffer support" ++ depends on FB && X86_VISWS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ SGI Visual Workstation support for framebuffer graphics. ++ ++config FB_GBE ++ bool "SGI Graphics Backend frame buffer support" ++ depends on (FB = y) && (SGI_IP32 || X86_VISWS) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for SGI Graphics Backend. ++ This chip is used in SGI O2 and Visual Workstation 320/540. ++ ++config FB_GBE_MEM ++ int "Video memory size in MB" ++ depends on FB_GBE ++ default 4 ++ help ++ This is the amount of memory reserved for the framebuffer, ++ which can be any value between 1MB and 8MB. ++ ++config FB_SUN3 ++ bool "Sun3 framebuffer support" ++ depends on (FB = y) && (SUN3 || SUN3X) && BROKEN ++ ++config FB_SBUS ++ bool "SBUS and UPA framebuffers" ++ depends on (FB = y) && SPARC ++ help ++ Say Y if you want support for SBUS or UPA based frame buffer device. ++ ++config FB_BW2 ++ bool "BWtwo support" ++ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the BWtwo frame buffer. ++ ++config FB_CG3 ++ bool "CGthree support" ++ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the CGthree frame buffer. ++ ++config FB_CG6 ++ bool "CGsix (GX,TurboGX) support" ++ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the CGsix (GX, TurboGX) ++ frame buffer. ++ ++config FB_PVR2 ++ tristate "NEC PowerVR 2 display support" ++ depends on FB && SH_DREAMCAST ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Say Y here if you have a PowerVR 2 card in your box. If you plan to ++ run linux on your Dreamcast, you will have to say Y here. ++ This driver may or may not work on other PowerVR 2 cards, but is ++ totally untested. Use at your own risk. If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called pvr2fb. ++ ++ You can pass several parameters to the driver at boot time or at ++ module load time. The parameters look like "video=pvr2:XXX", where ++ the meaning of XXX can be found at the end of the main source file ++ (<file:drivers/video/pvr2fb.c>). Please see the file ++ <file:Documentation/fb/pvr2fb.txt>. ++ ++config FB_EPSON1355 ++ bool "Epson 1355 framebuffer support" ++ depends on (FB = y) && (SUPERH || ARCH_CEIVA) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Build in support for the SED1355 Epson Research Embedded RAMDAC ++ LCD/CRT Controller (since redesignated as the S1D13505) as a ++ framebuffer. Product specs at ++ <http://www.erd.epson.com/vdc/html/products.htm>. ++ ++config FB_S1D13XXX ++ tristate "Epson S1D13XXX framebuffer support" ++ depends on FB ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Support for S1D13XXX framebuffer device family (currently only ++ working with S1D13806). Product specs at ++ <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> ++ ++config FB_NVIDIA ++ tristate "nVidia Framebuffer Support" ++ depends on FB && PCI ++ select I2C_ALGOBIT if FB_NVIDIA_I2C ++ select I2C if FB_NVIDIA_I2C ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select BITREVERSE ++ help ++ This driver supports graphics boards with the nVidia chips, TNT ++ and newer. For very old chipsets, such as the RIVA128, then use ++ the rivafb. ++ Say Y if you have such a graphics board. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called nvidiafb. ++ ++config FB_NVIDIA_I2C ++ bool "Enable DDC Support" ++ depends on FB_NVIDIA ++ help ++ This enables I2C support for nVidia Chipsets. This is used ++ only for getting EDID information from the attached display ++ allowing for robust video mode handling and switching. ++ ++ Because fbdev-2.6 requires that drivers must be able to ++ independently validate video mode parameters, you should say Y ++ here. ++ ++config FB_NVIDIA_BACKLIGHT ++ bool "Support for backlight control" ++ depends on FB_NVIDIA && PMAC_BACKLIGHT ++ select FB_BACKLIGHT ++ default y ++ help ++ Say Y here if you want to control the backlight of your display. ++ ++config FB_RIVA ++ tristate "nVidia Riva support" ++ depends on FB && PCI ++ select I2C_ALGOBIT if FB_RIVA_I2C ++ select I2C if FB_RIVA_I2C ++ select FB_DDC if FB_RIVA_I2C ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select BITREVERSE ++ help ++ This driver supports graphics boards with the nVidia Riva/Geforce ++ chips. ++ Say Y if you have such a graphics board. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called rivafb. ++ ++config FB_RIVA_I2C ++ bool "Enable DDC Support" ++ depends on FB_RIVA ++ help ++ This enables I2C support for nVidia Chipsets. This is used ++ only for getting EDID information from the attached display ++ allowing for robust video mode handling and switching. ++ ++ Because fbdev-2.6 requires that drivers must be able to ++ independently validate video mode parameters, you should say Y ++ here. ++ ++config FB_RIVA_DEBUG ++ bool "Lots of debug output from Riva(nVidia) driver" ++ depends on FB_RIVA ++ default n ++ help ++ Say Y here if you want the Riva driver to output all sorts ++ of debugging information to provide to the maintainer when ++ something goes wrong. ++ ++config FB_RIVA_BACKLIGHT ++ bool "Support for backlight control" ++ depends on FB_RIVA && PMAC_BACKLIGHT ++ select FB_BACKLIGHT ++ default y ++ help ++ Say Y here if you want to control the backlight of your display. ++ ++config FB_I810 ++ tristate "Intel 810/815 support (EXPERIMENTAL)" ++ depends on FB && EXPERIMENTAL && PCI && X86_32 ++ select AGP ++ select AGP_INTEL ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This driver supports the on-board graphics built in to the Intel 810 ++ and 815 chipsets. Say Y if you have and plan to use such a board. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called i810fb. ++ ++ For more information, please read ++ <file:Documentation/fb/intel810.txt> ++ ++config FB_I810_GTF ++ bool "use VESA Generalized Timing Formula" ++ depends on FB_I810 ++ help ++ If you say Y, then the VESA standard, Generalized Timing Formula ++ or GTF, will be used to calculate the required video timing values ++ per video mode. Since the GTF allows nondiscrete timings ++ (nondiscrete being a range of values as opposed to discrete being a ++ set of values), you'll be able to use any combination of horizontal ++ and vertical resolutions, and vertical refresh rates without having ++ to specify your own timing parameters. This is especially useful ++ to maximize the performance of an aging display, or if you just ++ have a display with nonstandard dimensions. A VESA compliant ++ monitor is recommended, but can still work with non-compliant ones. ++ If you need or want this, then select this option. The timings may ++ not be compliant with Intel's recommended values. Use at your own ++ risk. ++ ++ If you say N, the driver will revert to discrete video timings ++ using a set recommended by Intel in their documentation. ++ ++ If unsure, say N. ++ ++config FB_I810_I2C ++ bool "Enable DDC Support" ++ depends on FB_I810 && FB_I810_GTF ++ select I2C ++ select I2C_ALGOBIT ++ select FB_DDC ++ help ++ ++config FB_INTEL ++ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" ++ depends on FB && EXPERIMENTAL && PCI && X86 ++ select AGP ++ select AGP_INTEL ++ select I2C_ALGOBIT if FB_INTEL_I2C ++ select I2C if FB_INTEL_I2C ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This driver supports the on-board graphics built in to the Intel ++ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. ++ Say Y if you have and plan to use such a board. ++ ++ If you say Y here and want DDC/I2C support you must first say Y to ++ "I2C support" and "I2C bit-banging support" in the character devices ++ section. ++ ++ If you say M here then "I2C support" and "I2C bit-banging support" ++ can be build either as modules or built-in. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called intelfb. ++ ++ For more information, please read <file:Documentation/fb/intelfb.txt> ++ ++config FB_INTEL_DEBUG ++ bool "Intel driver Debug Messages" ++ depends on FB_INTEL ++ ---help--- ++ Say Y here if you want the Intel driver to output all sorts ++ of debugging information to provide to the maintainer when ++ something goes wrong. ++ ++config FB_INTEL_I2C ++ bool "DDC/I2C for Intel framebuffer support" ++ depends on FB_INTEL ++ default y ++ help ++ Say Y here if you want DDC/I2C support for your on-board Intel graphics. ++ ++config FB_MATROX ++ tristate "Matrox acceleration" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_TILEBLITTING ++ select FB_MACMODES if PPC_PMAC ++ ---help--- ++ Say Y here if you have a Matrox Millennium, Matrox Millennium II, ++ Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox ++ Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, ++ Matrox G400, G450 or G550 card in your box. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called matroxfb. ++ ++ You can pass several parameters to the driver at boot time or at ++ module load time. The parameters look like "video=matrox:XXX", and ++ are described in <file:Documentation/fb/matroxfb.txt>. ++ ++config FB_MATROX_MILLENIUM ++ bool "Millennium I/II support" ++ depends on FB_MATROX ++ help ++ Say Y here if you have a Matrox Millennium or Matrox Millennium II ++ video card. If you select "Advanced lowlevel driver options" below, ++ you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp ++ packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can ++ also use font widths different from 8. ++ ++config FB_MATROX_MYSTIQUE ++ bool "Mystique support" ++ depends on FB_MATROX ++ help ++ Say Y here if you have a Matrox Mystique or Matrox Mystique 220 ++ video card. If you select "Advanced lowlevel driver options" below, ++ you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp ++ packed pixel and 32 bpp packed pixel. You can also use font widths ++ different from 8. ++ ++config FB_MATROX_G ++ bool "G100/G200/G400/G450/G550 support" ++ depends on FB_MATROX ++ ---help--- ++ Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based ++ video card. If you select "Advanced lowlevel driver options", you ++ should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed ++ pixel and 32 bpp packed pixel. You can also use font widths ++ different from 8. ++ ++ If you need support for G400 secondary head, you must first say Y to ++ "I2C support" in the character devices section, and then to ++ "Matrox I2C support" and "G400 second head support" here in the ++ framebuffer section. G450/G550 secondary head and digital output ++ are supported without additional modules. ++ ++ The driver starts in monitor mode. You must use the matroxset tool ++ (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to ++ swap primary and secondary head outputs, or to change output mode. ++ Secondary head driver always start in 640x480 resolution and you ++ must use fbset to change it. ++ ++ Do not forget that second head supports only 16 and 32 bpp ++ packed pixels, so it is a good idea to compile them into the kernel ++ too. You can use only some font widths, as the driver uses generic ++ painting procedures (the secondary head does not use acceleration ++ engine). ++ ++ G450/G550 hardware can display TV picture only from secondary CRTC, ++ and it performs no scaling, so picture must have 525 or 625 lines. ++ ++config FB_MATROX_I2C ++ tristate "Matrox I2C support" ++ depends on FB_MATROX && I2C ++ select I2C_ALGOBIT ++ ---help--- ++ This drivers creates I2C buses which are needed for accessing the ++ DDC (I2C) bus present on all Matroxes, an I2C bus which ++ interconnects Matrox optional devices, like MGA-TVO on G200 and ++ G400, and the secondary head DDC bus, present on G400 only. ++ ++ You can say Y or M here if you want to experiment with monitor ++ detection code. You must say Y or M here if you want to use either ++ second head of G400 or MGA-TVO on G200 or G400. ++ ++ If you compile it as module, it will create a module named ++ i2c-matroxfb. ++ ++config FB_MATROX_MAVEN ++ tristate "G400 second head support" ++ depends on FB_MATROX_G && FB_MATROX_I2C ++ ---help--- ++ WARNING !!! This support does not work with G450 !!! ++ ++ Say Y or M here if you want to use a secondary head (meaning two ++ monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary ++ head is not compatible with accelerated XFree 3.3.x SVGA servers - ++ secondary head output is blanked while you are in X. With XFree ++ 3.9.17 preview you can use both heads if you use SVGA over fbdev or ++ the fbdev driver on first head and the fbdev driver on second head. ++ ++ If you compile it as module, two modules are created, ++ matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for ++ both G200 and G400, matroxfb_crtc2 is needed only by G400. You must ++ also load i2c-matroxfb to get it to run. ++ ++ The driver starts in monitor mode and you must use the matroxset ++ tool (available at ++ <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to ++ PAL or NTSC or to swap primary and secondary head outputs. ++ Secondary head driver also always start in 640x480 resolution, you ++ must use fbset to change it. ++ ++ Also do not forget that second head supports only 16 and 32 bpp ++ packed pixels, so it is a good idea to compile them into the kernel ++ too. You can use only some font widths, as the driver uses generic ++ painting procedures (the secondary head does not use acceleration ++ engine). ++ ++config FB_MATROX_MULTIHEAD ++ bool "Multihead support" ++ depends on FB_MATROX ++ ---help--- ++ Say Y here if you have more than one (supported) Matrox device in ++ your computer and you want to use all of them for different monitors ++ ("multihead"). If you have only one device, you should say N because ++ the driver compiled with Y is larger and a bit slower, especially on ++ ia32 (ix86). ++ ++ If you said M to "Matrox unified accelerated driver" and N here, you ++ will still be able to use several Matrox devices simultaneously: ++ insert several instances of the module matroxfb into the kernel ++ with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. ++ for the different Matrox devices. This method is slightly faster but ++ uses 40 KB of kernel memory per Matrox card. ++ ++ There is no need for enabling 'Matrox multihead support' if you have ++ only one Matrox card in the box. ++ ++config FB_RADEON ++ tristate "ATI Radeon display support" ++ depends on FB && PCI ++ select I2C_ALGOBIT if FB_RADEON_I2C ++ select I2C if FB_RADEON_I2C ++ select FB_DDC if FB_RADEON_I2C ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES if PPC_OF ++ help ++ Choose this option if you want to use an ATI Radeon graphics card as ++ a framebuffer device. There are both PCI and AGP versions. You ++ don't need to choose this to run the Radeon in plain VGA mode. ++ ++ If you say Y here and want DDC/I2C support you must first say Y to ++ "I2C support" and "I2C bit-banging support" in the character devices ++ section. ++ ++ If you say M here then "I2C support" and "I2C bit-banging support" ++ can be build either as modules or built-in. ++ ++ There is a product page at ++ http://apps.ati.com/ATIcompare/ ++ ++config FB_RADEON_I2C ++ bool "DDC/I2C for ATI Radeon support" ++ depends on FB_RADEON ++ default y ++ help ++ Say Y here if you want DDC/I2C support for your Radeon board. ++ ++config FB_RADEON_BACKLIGHT ++ bool "Support for backlight control" ++ depends on FB_RADEON && PMAC_BACKLIGHT ++ select FB_BACKLIGHT ++ default y ++ help ++ Say Y here if you want to control the backlight of your display. ++ ++config FB_RADEON_DEBUG ++ bool "Lots of debug output from Radeon driver" ++ depends on FB_RADEON ++ default n ++ help ++ Say Y here if you want the Radeon driver to output all sorts ++ of debugging information to provide to the maintainer when ++ something goes wrong. ++ ++config FB_ATY128 ++ tristate "ATI Rage128 display support" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES if PPC_PMAC ++ help ++ This driver supports graphics boards with the ATI Rage128 chips. ++ Say Y if you have such a graphics board and read ++ <file:Documentation/fb/aty128fb.txt>. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called aty128fb. ++ ++config FB_ATY128_BACKLIGHT ++ bool "Support for backlight control" ++ depends on FB_ATY128 && PMAC_BACKLIGHT ++ select FB_BACKLIGHT ++ default y ++ help ++ Say Y here if you want to control the backlight of your display. ++ ++config FB_ATY ++ tristate "ATI Mach64 display support" if PCI || ATARI ++ depends on FB && !SPARC32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FB_MACMODES if PPC ++ help ++ This driver supports graphics boards with the ATI Mach64 chips. ++ Say Y if you have such a graphics board. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called atyfb. ++ ++config FB_ATY_CT ++ bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" ++ depends on PCI && FB_ATY ++ default y if SPARC64 && FB_PCI ++ help ++ Say Y here to support use of ATI's 64-bit Rage boards (or other ++ boards based on the Mach64 CT, VT, GT, and LT chipsets) as a ++ framebuffer device. The ATI product support page for these boards ++ is at <http://support.ati.com/products/pc/mach64/>. ++ ++config FB_ATY_GENERIC_LCD ++ bool "Mach64 generic LCD support (EXPERIMENTAL)" ++ depends on FB_ATY_CT ++ help ++ Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, ++ Rage XC, or Rage XL chipset. ++ ++config FB_ATY_GX ++ bool "Mach64 GX support" if PCI ++ depends on FB_ATY ++ default y if ATARI ++ help ++ Say Y here to support use of the ATI Mach64 Graphics Expression ++ board (or other boards based on the Mach64 GX chipset) as a ++ framebuffer device. The ATI product support page for these boards ++ is at ++ <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. ++ ++config FB_ATY_BACKLIGHT ++ bool "Support for backlight control" ++ depends on FB_ATY && PMAC_BACKLIGHT ++ select FB_BACKLIGHT ++ default y ++ help ++ Say Y here if you want to control the backlight of your display. ++ ++config FB_S3TRIO ++ bool "S3 Trio display support" ++ depends on (FB = y) && PPC && BROKEN ++ help ++ If you have a S3 Trio say Y. Say N for S3 Virge. ++ ++config FB_SAVAGE ++ tristate "S3 Savage support" ++ depends on FB && PCI && EXPERIMENTAL ++ select I2C_ALGOBIT if FB_SAVAGE_I2C ++ select I2C if FB_SAVAGE_I2C ++ select FB_DDC if FB_SAVAGE_I2C ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This driver supports notebooks and computers with S3 Savage PCI/AGP ++ chips. ++ ++ Say Y if you have such a graphics card. ++ ++ To compile this driver as a module, choose M here; the module ++ will be called savagefb. ++ ++config FB_SAVAGE_I2C ++ bool "Enable DDC2 Support" ++ depends on FB_SAVAGE ++ help ++ This enables I2C support for S3 Savage Chipsets. This is used ++ only for getting EDID information from the attached display ++ allowing for robust video mode handling and switching. ++ ++ Because fbdev-2.6 requires that drivers must be able to ++ independently validate video mode parameters, you should say Y ++ here. ++ ++config FB_SAVAGE_ACCEL ++ bool "Enable Console Acceleration" ++ depends on FB_SAVAGE ++ default n ++ help ++ This option will compile in console acceleration support. If ++ the resulting framebuffer console has bothersome glitches, then ++ choose N here. ++ ++config FB_SIS ++ tristate "SiS/XGI display support" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the SiS 300, 315, 330 ++ and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. ++ Specs available at <http://www.sis.com> and <http://www.xgitech.com>. ++ ++ To compile this driver as a module, choose M here; the module ++ will be called sisfb. ++ ++config FB_SIS_300 ++ bool "SiS 300 series support" ++ depends on FB_SIS ++ help ++ Say Y here to support use of the SiS 300/305, 540, 630 and 730. ++ ++config FB_SIS_315 ++ bool "SiS 315/330/340 series and XGI support" ++ depends on FB_SIS ++ help ++ Say Y here to support use of the SiS 315, 330 and 340 series ++ (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well ++ as XGI V3XT, V5, V8 and Z7. ++ ++config FB_NEOMAGIC ++ tristate "NeoMagic display support" ++ depends on FB && PCI ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This driver supports notebooks with NeoMagic PCI chips. ++ Say Y if you have such a graphics card. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called neofb. ++ ++config FB_KYRO ++ tristate "IMG Kyro support" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Say Y here if you have a STG4000 / Kyro / PowerVR 3 based ++ graphics board. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called kyrofb. ++ ++config FB_3DFX ++ tristate "3Dfx Banshee/Voodoo3 display support" ++ depends on FB && PCI ++ select FB_CFB_IMAGEBLIT ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ help ++ This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 ++ chips. Say Y if you have such a graphics board. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called tdfxfb. ++ ++config FB_3DFX_ACCEL ++ bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" ++ depends on FB_3DFX && EXPERIMENTAL ++ ---help--- ++ This will compile the 3Dfx Banshee/Voodoo3 frame buffer device ++ with acceleration functions. ++ ++ ++config FB_VOODOO1 ++ tristate "3Dfx Voodoo Graphics (sst1) support" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or ++ Voodoo2 (cvg) based graphics card. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called sstfb. ++ ++ WARNING: Do not use any application that uses the 3D engine ++ (namely glide) while using this driver. ++ Please read the <file:Documentation/fb/README-sstfb.txt> for supported ++ options and other important info support. ++ ++config FB_CYBLA ++ tristate "Cyberblade/i1 support" ++ depends on FB && PCI && X86_32 && !64BIT ++ select FB_CFB_IMAGEBLIT ++ select VIDEO_SELECT ++ ---help--- ++ This driver is supposed to support the Trident Cyberblade/i1 ++ graphics core integrated in the VIA VT8601A North Bridge, ++ also known as VIA Apollo PLE133. ++ ++ Status: ++ - Developed, tested and working on EPIA 5000 and EPIA 800. ++ - Does work reliable on all systems with CRT/LCD connected to ++ normal VGA ports. ++ - Should work on systems that do use the internal LCD port, but ++ this is absolutely not tested. ++ ++ Character imageblit, copyarea and rectangle fill are hw accelerated, ++ ypan scrolling is used by default. ++ ++ Please do read <file:Documentation/fb/cyblafb/*>. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called cyblafb. ++ ++config FB_TRIDENT ++ tristate "Trident support" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ This driver is supposed to support graphics boards with the ++ Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops ++ but also on some motherboards. For more information, read ++ <file:Documentation/fb/tridentfb.txt> ++ ++ Cyberblade/i1 support will be removed soon, use the cyblafb driver ++ instead. ++ ++ Say Y if you have such a graphics board. ++ ++ ++ To compile this driver as a module, choose M here: the ++ module will be called tridentfb. ++ ++config FB_TRIDENT_ACCEL ++ bool "Trident Acceleration functions (EXPERIMENTAL)" ++ depends on FB_TRIDENT && EXPERIMENTAL ++ ---help--- ++ This will compile the Trident frame buffer device with ++ acceleration functions. ++ ++config FB_PM3 ++ tristate "Permedia3 support" ++ depends on FB && PCI && BROKEN ++ help ++ This is the frame buffer device driver for the 3DLabs Permedia3 ++ chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & ++ similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 ++ and maybe other boards. ++ ++config FB_AU1100 ++ bool "Au1100 LCD Driver" ++ depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y ++ ++config FB_AU1200 ++ bool "Au1200 LCD Driver" ++ depends on FB && MIPS && SOC_AU1200 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the framebuffer driver for the AMD Au1200 SOC. It can drive ++ various panels and CRTs by passing in kernel cmd line option ++ au1200fb:panel=<name>. ++ ++source "drivers/video/geode/Kconfig" ++ ++config FB_FFB ++ bool "Creator/Creator3D/Elite3D support" ++ depends on FB_SBUS && SPARC64 ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Creator, Creator3D, ++ and Elite3D graphics boards. ++ ++config FB_TCX ++ bool "TCX (SS4/SS5 only) support" ++ depends on FB_SBUS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the TCX 24/8bit frame ++ buffer. ++ ++config FB_CG14 ++ bool "CGfourteen (SX) support" ++ depends on FB_SBUS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the CGfourteen frame ++ buffer on Desktop SPARCsystems with the SX graphics option. ++ ++config FB_P9100 ++ bool "P9100 (Sparcbook 3 only) support" ++ depends on FB_SBUS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the P9100 card ++ supported on Sparcbook 3 machines. ++ ++config FB_LEO ++ bool "Leo (ZX) support" ++ depends on FB_SBUS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the SBUS-based Sun ZX ++ (leo) frame buffer cards. ++ ++config FB_PCI ++ bool "PCI framebuffers" ++ depends on (FB = y) && PCI && SPARC ++ ++config FB_IGA ++ bool "IGA 168x display support" ++ depends on SPARC32 && FB_PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the framebuffer device for the INTERGRAPHICS 1680 and ++ successor frame buffer cards. ++ ++config FB_HIT ++ tristate "HD64461 Frame Buffer support" ++ depends on FB && HD64461 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is the frame buffer device driver for the Hitachi HD64461 LCD ++ frame buffer card. ++ ++config FB_PMAG_AA ++ bool "PMAG-AA TURBOchannel framebuffer support" ++ depends on (FB = y) && TC ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) ++ used mainly in the MIPS-based DECstation series. ++ ++config FB_PMAG_BA ++ bool "PMAG-BA TURBOchannel framebuffer support" ++ depends on (FB = y) && TC ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) ++ used mainly in the MIPS-based DECstation series. ++ ++config FB_PMAGB_B ++ bool "PMAGB-B TURBOchannel framebuffer support" ++ depends on (FB = y) && TC ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Support for the PMAGB-B TURBOchannel framebuffer card used mainly ++ in the MIPS-based DECstation series. The card is currently only ++ supported in 1280x1024x8 mode. ++ ++config FB_MAXINE ++ bool "Maxine (Personal DECstation) onboard framebuffer support" ++ depends on (FB = y) && MACH_DECSTATION ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Support for the onboard framebuffer (1024x768x8) in the Personal ++ DECstation series (Personal DECstation 5000/20, /25, /33, /50, ++ Codename "Maxine"). ++ ++config FB_TX3912 ++ bool "TMPTX3912/PR31700 frame buffer support" ++ depends on (FB = y) && NINO ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core ++ see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. ++ ++ Say Y here to enable kernel support for the on-board framebuffer. ++ ++config FB_G364 ++ bool "G364 frame buffer support" ++ depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ The G364 driver is the framebuffer used in MIPS Magnum 4000 and ++ Olivetti M700-10 systems. ++ ++config FB_68328 ++ bool "Motorola 68328 native frame buffer support" ++ depends on FB && (M68328 || M68EZ328 || M68VZ328) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Say Y here if you want to support the built-in frame buffer of ++ the Motorola 68328 CPU family. ++ ++config FB_PXA ++ tristate "PXA LCD framebuffer support" ++ depends on FB && ARCH_PXA ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Frame buffer driver for the built-in LCD controller in the Intel ++ PXA2x0 processor. ++ ++ This driver is also available as a module ( = code which can be ++ inserted and removed from the running kernel whenever you want). The ++ module will be called pxafb. If you want to compile it as a module, ++ say M here and read <file:Documentation/modules.txt>. ++ ++ If unsure, say N. ++ ++config FB_PXA_PARAMETERS ++ bool "PXA LCD command line parameters" ++ default n ++ depends on FB_PXA ++ ---help--- ++ Enable the use of kernel command line or module parameters ++ to configure the physical properties of the LCD panel when ++ using the PXA LCD driver. ++ ++ This option allows you to override the panel parameters ++ supplied by the platform in order to support multiple ++ different models of flatpanel. If you will only be using a ++ single model of flatpanel then you can safely leave this ++ option disabled. ++ ++ <file:Documentation/fb/pxafb.txt> describes the available parameters. ++ ++config FB_MBX ++ tristate "2700G LCD framebuffer support" ++ depends on FB && ARCH_PXA ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Framebuffer driver for the Intel 2700G (Marathon) Graphics ++ Accelerator ++ ++config FB_MBX_DEBUG ++ bool "Enable debugging info via debugfs" ++ depends on FB_MBX && DEBUG_FS ++ default n ++ ---help--- ++ Enable this if you want debugging information using the debug ++ filesystem (debugfs) ++ ++ If unsure, say N. ++ ++config FB_W100 ++ tristate "W100 frame buffer support" ++ depends on FB && PXA_SHARPSL ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. ++ ++ This driver is also available as a module ( = code which can be ++ inserted and removed from the running kernel whenever you want). The ++ module will be called w100fb. If you want to compile it as a module, ++ say M here and read <file:Documentation/modules.txt>. ++ ++ If unsure, say N. ++ ++config FB_S3C2410 ++ tristate "S3C2410 LCD framebuffer support" ++ depends on FB && ARCH_S3C2410 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Frame buffer driver for the built-in LCD controller in the Samsung ++ S3C2410 processor. ++ ++ This driver is also available as a module ( = code which can be ++ inserted and removed from the running kernel whenever you want). The ++ module will be called s3c2410fb. If you want to compile it as a module, ++ say M here and read <file:Documentation/modules.txt>. ++ ++ If unsure, say N. ++config FB_S3C2410_DEBUG ++ bool "S3C2410 lcd debug messages" ++ depends on FB_S3C2410 ++ help ++ Turn on debugging messages. Note that you can set/unset at run time ++ through sysfs ++ ++config FB_PNX4008_DUM ++ tristate "Display Update Module support on Philips PNX4008 board" ++ depends on FB && ARCH_PNX4008 ++ ---help--- ++ Say Y here to enable support for PNX4008 Display Update Module (DUM) ++ ++config FB_PNX4008_DUM_RGB ++ tristate "RGB Framebuffer support on Philips PNX4008 board" ++ depends on FB_PNX4008_DUM ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Say Y here to enable support for PNX4008 RGB Framebuffer ++ ++config FB_IBM_GXT4500 ++ tristate "Framebuffer support for IBM GXT4500P adaptor" ++ depends on PPC ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Say Y here to enable support for the IBM GXT4500P display ++ adaptor, found on some IBM System P (pSeries) machines. ++ ++config FB_VIRTUAL ++ tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" ++ depends on FB ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ This is a `virtual' frame buffer device. It operates on a chunk of ++ unswappable kernel memory instead of on the memory of a graphics ++ board. This means you cannot see any output sent to this frame ++ buffer device, while it does consume precious memory. The main use ++ of this frame buffer device is testing and debugging the frame ++ buffer subsystem. Do NOT enable it for normal systems! To protect ++ the innocent, it has to be enabled explicitly at boot time using the ++ kernel option `video=vfb:'. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called vfb. In order to load it, you must use ++ the vfb_enable=1 option. ++ ++ If unsure, say N. ++if VT ++ source "drivers/video/console/Kconfig" ++endif ++ ++if FB || SGI_NEWPORT_CONSOLE ++ source "drivers/video/logo/Kconfig" ++endif ++ ++if SYSFS ++ source "drivers/video/backlight/Kconfig" ++endif ++ ++endmenu ++ +diff -uNr linux-2.6.20.vanilla/drivers/video/Makefile linux-2.6.20/drivers/video/Makefile +--- linux-2.6.20.vanilla/drivers/video/Makefile 2007-02-10 19:02:14.000000000 +0100 ++++ linux-2.6.20/drivers/video/Makefile 2007-02-11 16:40:07.000000000 +0100 +@@ -30,6 +30,7 @@ + obj-$(CONFIG_FB_PM2) += pm2fb.o + obj-$(CONFIG_FB_PM3) += pm3fb.o + ++obj-$(CONFIG_FB_MQ200) += mq200/ + obj-$(CONFIG_FB_MATROX) += matrox/ + obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o + obj-$(CONFIG_FB_NVIDIA) += nvidia/ +diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/Makefile linux-2.6.20/drivers/video/mq200/Makefile +--- linux-2.6.20.vanilla/drivers/video/mq200/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/drivers/video/mq200/Makefile 2007-02-11 16:41:44.000000000 +0100 +@@ -0,0 +1,6 @@ ++# Makefile for mq200 video driver ++# 4 Aug 2003, Holger Hans Peter Freyther ++# 2 Jan 2007, mr nice ++ ++obj-$(CONFIG_FB_MQ200) += mq_skeleton.o mq_external.o ++ +diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq200_data.h linux-2.6.20/drivers/video/mq200/mq200_data.h +--- linux-2.6.20.vanilla/drivers/video/mq200/mq200_data.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/drivers/video/mq200/mq200_data.h 2007-02-11 16:41:09.000000000 +0100 +@@ -0,0 +1,893 @@ ++/* ++ * From ucLinux mq200fb.c and mq200fb.h ++ */ ++ ++#ifndef __MQ200_FB_H__ ++#define __MQ200_FB_H__ ++ ++struct mq200_io_regions { ++ u32 fb_size; /* framebuffer size */ ++ unsigned long phys_mmio_base; /* physical register memory base */ ++ unsigned long virt_mmio_base; /* virtual start of registers */ ++ unsigned long phys_fb_base; /* physical address of frame buffer */ ++ unsigned long virt_fb_base; /* virtual start of the framebuffer */ ++}; ++ ++#define MQ200_MONITOR_HORI_RES(info) info->monitor_info.horizontal_res ++#define MQ200_MONITOR_VERT_RES(info) info->monitor_info.vertical_res ++#define MQ200_MONITOR_DEPTH(info) info->monitor_info.depth ++#define MQ200_MONITOR_LINE_LENGTH(info) info->monitor_info.line_length ++ ++struct mq200_monitor_info { ++ unsigned int horizontal_res; ++ unsigned int vertical_res; ++ unsigned int depth; ++ unsigned int refresh; ++ unsigned int line_length; ++ unsigned long flags; ++}; ++ ++ ++/** ++ * Addresses of Module ++ */ ++#define MQ200_FB_BASE (x) (x + 0x1800000) /* framebuffer */ ++#define MQ200_FB_SIZE 0x200000 /* framebuffer size in bytes */ ++#define MQ200_REGS_BASE(x) (x + 0x1e00000) /* start of registers area */ ++#define MQ200_REGS_SIZE 0x200000 /* registers area size */ ++ ++#define PMU_OFFSET 0x00000 /* power management */ ++#define CPU_OFFSET 0x02000 /* CPU interface */ ++#define MIU_OFFSET 0x04000 /* memory controller */ ++#define IN_OFFSET 0x08000 /* interrupt controller */ ++#define GC_OFFSET 0x0a000 /* graphics controller 1&2 */ ++#define GE_OFFSET 0x0c000 /* graphics engine */ ++#define FPI_OFFSET 0x0e000 /* flat panel controller */ ++#define CP1_OFFSET 0x10000 /* color palette 1 */ ++#define DC_OFFSET 0x14000 /* device configuration */ ++#define PCI_OFFSET 0x16000 /* PCI configuration */ ++#define PSF_OFFSET 0x18000 /* ??? */ ++ ++ ++/**** ++ * Registers ++ */ ++ ++/* power management unit */ ++#define PMR(addr) (addr + PCI_OFFSET + 0x40)/* power management ++ register */ ++#define PMR_VALUE 0x06210001 /* expected read value of PMR register */ ++#define PM00R(addr) (addr + PMU_OFFSET + 0x00) /* power management unit ++ configuration ++ register */ ++#define PM01R(addr) (addr + PMU_OFFSET + 0x04) /* D1 state control */ ++#define PM02R(addr) (addr + PMU_OFFSET + 0x08) /* d2 state control */ ++#define PM06R(addr) (addr + PMU_OFFSET + 0x18) /* PLL 2 programming */ ++#define PM07R(addr) (addr + PMU_OFFSET + 0x1c) /* PLL 3 programming */ ++ ++#define PMCSR(addr) (addr + PCI_OFFSET + 0x44) /* power management ++ control/status ++ register */ ++ ++/* memory interface unit */ ++#define MM00R(addr) (addr + MIU_OFFSET + 0x00)/* MIU interface control ++ 0 */ ++#define MM01R(addr) (addr + MIU_OFFSET + 0x04) /* MIU interface control ++ 1 */ ++#define MM02R(addr) (addr + MIU_OFFSET + 0x08) /* memory interface ++ control 2 */ ++#define MM03R(addr) (addr + MIU_OFFSET + 0x0c) /* memory interface ++ control 3 */ ++#define MM04R(addr) (addr + MIU_OFFSET + 0x10) /* memory interface ++ control 4 */ ++/* graphics controller 1 module */ ++#define GC00R(addr) (addr + GC_OFFSET + 0x00) /* graphics controller 1 ++ control */ ++#define GC01R(addr) (addr + GC_OFFSET + 0x04) /* graphics controller ++ CRT control */ ++#define GC02R(addr) (addr + GC_OFFSET + 0x08) /* horizontal display 1 ++ control */ ++#define GC03R(addr) (addr + GC_OFFSET + 0x0c) /* vertical display 1 ++ control */ ++#define GC04R(addr) (addr + GC_OFFSET + 0x10) /* horizontal sync 1 ++ control */ ++#define GC05R(addr) (addr + GC_OFFSET + 0x14) /* vertical sync 1 ++ control */ ++#define GC07R(addr) (addr + GC_OFFSET + 0x1c) /* vertical display 1 ++ count */ ++#define GC08R(addr) (addr + GC_OFFSET + 0x20) /* horizontal window 1 ++ control */ ++#define GC09R(addr) (addr + GC_OFFSET + 0x24) /* vertical window 1 ++ control */ ++#define GC0AR(addr) (addr + GC_OFFSET + 0x28) /* alternate horizontal ++ window 1 control */ ++#define GC0BR(addr) (addr + GC_OFFSET + 0x2c) /* alternate vertical ++ window 1 control */ ++#define GC0CR(addr) (addr + GC_OFFSET + 0x30) /* window 1 ++ start address */ ++#define GC0DR(addr) (addr + GC_OFFSET + 0x34) /* alternate window 1 ++ start address */ ++#define GC0ER(addr) (addr + GC_OFFSET + 0x38) /* window 1 stride */ ++#define GC0FR(addr) (addr + GC_OFFSET + 0x3c) /* reserved */ ++#define GC10R(addr) (addr + GC_OFFSET + 0x40) /* hardware cursor 1 ++ position */ ++#define GC11R(addr) (addr + GC_OFFSET + 0x44) /* hardware cursor 1 ++ start address and ++ offset */ ++#define GC12R(addr) (addr + GC_OFFSET + 0x48) /* hardware cursor 1 ++ foreground color */ ++#define GC13R(addr) (addr + GC_OFFSET + 0x4c) /* hardware cursor 1 ++ background color */ ++/* graphics engine */ ++#define ROP_SRCCOPY 0xCC /* dest = source */ ++#define ROP_SRCPAINT 0xEE /* dest = source OR dest */ ++#define ROP_SRCAND 0x88 /* dest = source AND dest */ ++#define ROP_SRCINVERT 0x66 /* dest = source XOR dest */ ++#define ROP_SRCERASE 0x44 /* dest = source AND (NOT dest) */ ++#define ROP_NOTSRCCOPY 0x33 /* dest = NOT source */ ++#define ROP_NOTSRCERASE 0x11 /* dest = (NOT source) AND (NOT dest) */ ++#define ROP_MERGECOPY 0xC0 /* dest = source AND pattern */ ++#define ROP_MERGEPAINT 0xBB /* dest = (NOT source) OR dest */ ++#define ROP_PATCOPY 0xF0 /* dest = pattern */ ++#define ROP_PATPAINT 0xFB /* dest = DPSnoo */ ++#define ROP_PATINVERT 0x5A /* dest = pattern XOR dest */ ++#define ROP_DSTINVERT 0x55 /* dest = NOT dest */ ++#define ROP_BLACKNESS 0x00 /* dest = BLACK */ ++#define ROP_WHITENESS 0xFF /* dest = WHITE */ ++ ++#define GE00R(addr) (addr + GE_OFFSET + 0x00) /* primary drawing command ++ register */ ++#define GE01R(addr) (addr + GE_OFFSET + 0x04) /* primary width and ++ height register */ ++#define GE02R(addr) (addr + GE_OFFSET + 0x08) /* primary destination ++ address register */ ++#define GE03R(addr) (addr + GE_OFFSET + 0x0c) /* primary source XY ++ register */ ++#define GE04R(addr) (addr + GE_OFFSET + 0x10) /* primary color compare ++ register */ ++#define GE05R(addr) (addr + GE_OFFSET + 0x14) /* primary clip left/top ++ register */ ++#define GE06R(addr) (addr + GE_OFFSET + 0x18) /* primary clip ++ right/bottom register ++ */ ++#define GE07R(addr) (addr + GE_OFFSET + 0x1c) /* primary source and ++ pattern offset ++ register */ ++#define GE08R(addr) (addr + GE_OFFSET + 0x20) /* primary foreground ++ color ++ register/rectangle ++ fill register */ ++#define GE09R(addr) (addr + GE_OFFSET + 0x24) /* source stride/offset ++ register */ ++#define GE0AR(addr) (addr + GE_OFFSET + 0x28) /* destination stride ++ register and color ++ depth */ ++#define GE0BR(addr) (addr + GE_OFFSET + 0x2c) /* image base address ++ register */ ++#define GE40R(addr) (addr + GE_OFFSET + 0x100) /* mono pattern register ++ 0 */ ++#define GE41R(addr) (addr + GE_OFFSET + 0x104) /* mono pattern register ++ 1 */ ++#define GE42R(addr) (addr + GE_OFFSET + 0x108) /* foreground color ++ register */ ++#define GE43R(addr) (addr + GE_OFFSET + 0x10c) /* background color ++ register */ ++/* color palette */ ++#define C1xxR(addr, regno) \ ++ (addr + CP1_OFFSET + (regno) * 4) /* graphics controller color ++ palette 1 */ ++/* device configuration */ ++#define DC00R(addr) (addr + DC_OFFSET + 0x00) /* device configuration ++ register 0 */ ++#define DC_RESET 0x4000 ++/* PCI configuration space */ ++#define PC00R(addr) (addr + PCI_OFFSET + 0x00)/* device ID/vendor ID ++ register */ ++/* Flatpanel Control */ ++#define FP00R(addr) (addr + FPI_OFFSET + 0x00) /* Flat Panel Control 0 */ ++#define FP01R(addr) (addr + FPI_OFFSET + 0x04) /* Flat Panel Output Pin */ ++#define FP02R(addr) (addr + FPI_OFFSET + 0x08) /* Flat Panel Gener Purpose ++ Outout Control Register */ ++#define FP03R(addr) (addr + FPI_OFFSET + 0x0c) /* General Purpose I/O Port ++ Control Register */ ++#define FP04R(addr) (addr + FPI_OFFSET + 0x10) /* STN Panel Control Register */ ++#define FP05R(addr) (addr + FPI_OFFSET + 0x14) /* D-STN Half Frame Buffer ++ Control Register -By Guess */ ++#define FP0FR(addr) (addr + FPI_OFFSET + 0x3c) /* Pulse Width Modulation ++ Control Register */ ++#define FRCTL_PATTERN_COUNT 32 ++#define FP10R(addr) (addr + FPI_OFFSET + 0x40) /* Frame-Rate Control Pattern ++ Register */ ++#define FP11R(addr) (addr + FPI_OFFSET + 0x44) ++#define FP2FR(addr) (addr + FPI_OFFSET + 0xc0) /* Frame-Rate Control Weight ++ Registers */ ++ ++ ++ ++ ++/* power management miscellaneous control */ ++union pm00r { ++ struct { ++ u32 pll1_n_b5 :1; /* PLL 1 N parameter bit 5 is 0 */ ++ u32 reserved_1 :1; ++ u32 pll2_enbl :1; /* PLL 2 enable */ ++ u32 pll3_enbl :1; /* PLL 3 enable */ ++ u32 reserved_2 :1; ++ u32 pwr_st_ctrl :1; /* power state status control */ ++ u32 reserved_3 :2; ++ ++ u32 ge_enbl :1; /* graphics engine enable */ ++ u32 ge_bsy_gl :1; /* graphics engine force busy (global) */ ++ u32 ge_bsy_lcl :1; /* graphics engine force busy (local) */ ++ u32 ge_clock :2; /* graphics engine clock select */ ++ u32 ge_cmd_fifo :1; /* graphics engine command FIFO reset */ ++ u32 ge_src_fifo :1; /* graphics engine CPU source FIFO reset */ ++ u32 miu_pwr_seq :1; /* memory interface unit power sequencing ++ enable */ ++ ++ u32 d3_mem_rfsh :1; /* D3 memory refresh */ ++ u32 d4_mem_rfsh :1; /* D4 memory refresh */ ++ u32 gpwr_intrvl :2; /* general power sequencing interval */ ++ u32 fppwr_intrvl:2; /* flat panel power sequencing interval */ ++ u32 gpwr_seq_ctr:1; /* general power sequencing interval control */ ++ u32 pmu_tm :1; /* PMU test mode */ ++ ++ u32 pwr_state :2; /* power state (read only) */ ++ u32 pwr_seq_st :1; /* power sequencing active status (read ++ only) */ ++ u32 reserved_4 :5; ++ } part; ++ u32 whole; ++}; ++ ++/* D1 state control */ ++union pm01r { ++ struct { ++ u32 osc_enbl :1; /* D1 oscillator enable */ ++ u32 pll1_enbl :1; /* D1 PLL 1 enable */ ++ u32 pll2_enbl :1; /* D1 PLL 2 enable */ ++ u32 pll3_enbl :1; /* D1 PLL 3 enable */ ++ u32 miu_enbl :1; /* D1 Memory Interface Unit (MIU) enable */ ++ u32 mem_rfsh :1; /* D1 memory refresh enable */ ++ u32 ge_enbl :1; /* D1 Graphics Engine (GE) enable */ ++ u32 reserved_1 :1; ++ ++ u32 crt_enbl :1; /* D1 CRT enable */ ++ u32 fpd_enbl :1; /* D1 Flat Panel enable */ ++ u32 reserved_2 :6; ++ ++ u32 ctl1_enbl :1; /* D1 controller 1 enable */ ++ u32 win1_enbl :1; /* D1 window 1 enable */ ++ u32 awin1_enbl :1; /* D1 alternate window 1 enable */ ++ u32 cur1_enbl :1; /* D1 cursor 1 enable */ ++ u32 reserved_3 :4; ++ ++ u32 ctl2_enbl :1; /* D1 controller 2 enable */ ++ u32 win2_enbl :1; /* D1 window 2 enable */ ++ u32 awin2_enbl :1; /* D1 alternate window 2 enable */ ++ u32 cur2_enbl :1; /* D1 cursor 2 enable */ ++ u32 reserved_4 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* D2 state control */ ++union pm02r { ++ struct { ++ u32 osc_enbl :1; /* D2 oscillator enable */ ++ u32 pll1_enbl :1; /* D2 PLL 1 enable */ ++ u32 pll2_enbl :1; /* D2 PLL 2 enable */ ++ u32 pll3_enbl :1; /* D2 PLL 3 enable */ ++ u32 miu_enbl :1; /* D2 Memory Interface Unit (MIU) enable */ ++ u32 mem_rfsh :1; /* D2 memory refresh enable */ ++ u32 ge_enbl :1; /* D2 Graphics Engine (GE) enable */ ++ u32 reserved_1 :1; ++ ++ u32 crt_enbl :1; /* D2 CRT enable */ ++ u32 fpd_enbl :1; /* D2 Flat Panel enable */ ++ u32 reserved_2 :6; ++ ++ u32 ctl1_enbl :1; /* D2 controller 1 enable */ ++ u32 win1_enbl :1; /* D2 window 1 enable */ ++ u32 awin1_enbl :1; /* D2 alternate window 1 enable */ ++ u32 cur1_enbl :1; /* D2 cursor 1 enable */ ++ u32 reserved_3 :4; ++ ++ u32 ctl2_enbl :1; /* D2 controller 2 enable */ ++ u32 win2_enbl :1; /* D2 window 2 enable */ ++ u32 awin2_enbl :1; /* D2 alternate window 2 enable */ ++ u32 cur2_enbl :1; /* D2 cursor 2 enable */ ++ u32 reserved_4 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* PLL 2 programming */ ++union pm06r { ++ struct { ++ u32 clk_src :1; /* PLL 2 reference clock source */ ++ u32 bypass :1; /* PLL 2 bypass */ ++ u32 reserved_1 :2; ++ u32 p_par :3; /* PLL 2 P parameter */ ++ u32 reserved_2 :1; ++ ++ u32 n_par :5; /* PLL 2 N parameter */ ++ u32 reserved_3 :3; ++ ++ u32 m_par :8; /* PLL 2 M parameter */ ++ ++ u32 reserved_4 :4; ++ u32 trim :4; /* PLL 2 trim value */ ++ } part; ++ u32 whole; ++}; ++ ++/* PLL 3 programming */ ++union pm07r { ++ struct { ++ u32 clk_src :1; /* PLL 3 reference clock source */ ++ u32 bypass :1; /* PLL 3 bypass */ ++ u32 reserved_1 :2; ++ u32 p_par :3; /* PLL 3 P parameter */ ++ u32 reserved_2 :1; ++ ++ u32 n_par :5; /* PLL 3 N parameter */ ++ u32 reserved_3 :3; ++ ++ u32 m_par :8; /* PLL 3 M parameter */ ++ ++ u32 reserved_4 :4; ++ u32 trim :4; /* PLL 3 trim value */ ++ } part; ++ u32 whole; ++}; ++ ++ ++ ++/* MIU interface control 1 */ ++union mm00r { ++ struct { ++ u32 miu_enbl :1; /* MIU enable bit */ ++ u32 mr_dsbl :1; /* MIU reset disable bit */ ++ u32 edr_dsbl :1; /* embedded DRAM reset disable bit */ ++ u32 reserved_1 :29; ++ } part; ++ u32 whole; ++}; ++ ++/* MIU interface control 2 */ ++union mm01r { ++ struct { ++ u32 mc_src :1; /* memory clock source */ ++ u32 msr_enbl :1; /* memory slow refresh enable bit */ ++ u32 pb_cpu :1; /* page break enable for CPU */ ++ u32 pb_gc1 :1; /* page break enable for GC1 */ ++ u32 pb_gc2 :1; /* page break enable for GC2 */ ++ u32 pb_stn_r :1; /* page break enable for STN read */ ++ u32 pb_stn_w :1; /* page break enable for STN write */ ++ u32 pb_ge :1; /* page break enable for GE */ ++ u32 reserved_1 :4; ++ u32 mr_interval :14; /* normal memory refresh time interval */ ++ u32 reserved_2 :4; ++ u32 edarm_enbl :1; /* embedded DRAM auto-refresh mode enable */ ++ u32 eds_enbl :1; /* EDRAM standby enable for EDRAM normal ++ mode operation */ ++ } part; ++ u32 whole; ++}; ++ ++/* memory interface control 3 */ ++union mm02r { ++ struct { ++ u32 bs_ :2; ++ u32 bs_stnr :2; /* burst count for STN read memory cycles */ ++ u32 bs_stnw :2; /* burst count for STN write memroy cycles */ ++ u32 bs_ge :2; /* burst count for graphics engine ++ read/write memroy cycles */ ++ u32 bs_cpuw :2; /* burst count for CPU write memory cycles */ ++ u32 fifo_gc1 :4; /* GC1 display refresh FIFO threshold */ ++ u32 fifo_gc2 :4; /* GC2 display refresh FIFO threshold */ ++ u32 fifo_stnr :4; /* STN read FIFO threshold */ ++ u32 fifo_stnw :4; /* STN write FIFO threshold */ ++ u32 fifo_ge_src :3; /* GE source read FIFO threshold */ ++ u32 fifo_ge_dst :3; /* GE destination read FIFO threshold */ ++ } part; ++ u32 whole; ++}; ++ ++/* memory interface control 4 */ ++union mm03r { ++ struct { ++ u32 rd_late_req :1; /* read latency request */ ++ u32 reserved_1 :31; ++ } part; ++ u32 whole; ++}; ++ ++/* memory interface control 5 */ ++union mm04r { ++ struct { ++ u32 latency :3; /* EDRAM latency */ ++ u32 dmm_cyc :1; /* enable for the dummy cycle insertion ++ between read and write cycles */ ++ u32 pre_dmm_cyc :1; /* enable for the dummy cycle insertion ++ between read/write and precharge cycles ++ for the same bank */ ++ u32 reserved_1 :3; ++ u32 bnk_act_cls :2; /* bank activate command to bank close ++ command timing interval control */ ++ u32 bnk_act_rw :1; /* bank activate command to read/wirte ++ command timing interval control */ ++ u32 bnk_cls_act :1; /* bank close command to bank activate ++ command timing interval control */ ++ u32 trc :1; /* row cycle time */ ++ u32 reserved_2 :3; ++ u32 delay_r :2; /* programmable delay for read clock */ ++ u32 delay_m :2; /* programmable delay for internal memory ++ clock */ ++ } part; ++ u32 whole; ++}; ++ ++/* graphics controller 1 register */ ++union gc00r { ++ struct { ++ u32 ctl_enbl :1; /* Controller 1 Enable */ ++ u32 hc_reset :1; /* Horizontal Counter 1 Reset */ ++ u32 vc_reset :1; /* Vertical Counter 1 Reset */ ++ u32 iwin_enbl :1; /* Image Window 1 Enable */ ++ u32 gcd :4; /* Graphics Color Depth (GCD) */ ++ ++ u32 hc_enbl :1; /* Hardware Cursor 1 Enable */ ++ u32 reserved_1 :2; ++ u32 aiwin_enbl :1; /* Alternate Image Window Enable */ ++ u32 agcd :4; /* Alternate Graphics Color Depth (AGCD) */ ++ ++ u32 g1rclk_src :2; /* G1RCLK Source */ ++ u32 tm0 :1; /* Test Mode 0 */ ++ u32 tm1 :1; /* Test Mode 1 */ ++ u32 fd :3; /* G1MCLK First Clock Divisor (FD1) */ ++ u32 reserved_2 :1; ++ ++ u32 sd :8; /* G1MCLK Second Clock Divisor (SD1) */ ++ } part; ++ u32 whole; ++}; ++ ++/* graphics controller CRT control */ ++union gc01r { ++ struct { ++ u32 dac_enbl :2; /* CRT DAC enable */ ++ u32 hsync_out :1; /* CRT HSYNC output during power down mode */ ++ u32 vsync_out :1; /* CRT VSYNC output during power down mode */ ++ u32 hsync_ctl :2; /* CRT HSYNC control */ ++ u32 vsync_ctl :2; /* CRT VSYNC control */ ++ /**/ ++ u32 hsync_pol :1; /* CRT HSYNC polarity */ ++ u32 vsync_pol :1; /* CRT VSYNC polarity */ ++ u32 sync_p_enbl :1; /* sync pedestal enable */ ++ u32 blnk_p_enbl :1; /* blank pedestal enable */ ++ u32 c_sync_enbl :1; /* composite sync enable */ ++ u32 vref_sel :1; /* VREF select */ ++ u32 mn_sns_enbl :1; /* monitor sense enable */ ++ u32 ct_out_enbl :1; /* constant output enable */ ++ /**/ ++ u32 dac_out_lvl :8; /* monitor sense DAC output level */ ++ /**/ ++ u32 blue_dac_r :1; /* blue DAC sense result */ ++ u32 green_dac_r :1; /* green DAC sense result */ ++ u32 red_dac_r :1; /* red DAC sense result */ ++ u32 reserved_1 :1; ++ u32 mon_col_sel :1; /* mono/color monitor select */ ++ u32 reserved_2 :3; ++ } part; ++ u32 whole; ++}; ++ ++/* horizontal display 1 control */ ++union gc02r { ++ struct { ++ u32 hd1t :12; /* horizontal display 1 total */ ++ u32 reserved_1 :4; ++ ++ u32 hd1e :12; /* horizontal display 1 end */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* vertical display 1 control */ ++union gc03r { ++ struct { ++ u32 vd1t :12; /* vertical display 1 total */ ++ u32 reserved_1 :4; ++ ++ u32 vd1e :12; /* vertical display 1 end */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* horizontal sync 1 control */ ++union gc04r { ++ struct { ++ u32 hs1s :12; /* horizontal sync 1 start */ ++ u32 reserved_1 :4; ++ ++ u32 hs1e :12; /* horizontal sync 1 end */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* vertical sync 1 control */ ++union gc05r { ++ struct { ++ u32 vs1s :12; /* vertical sync 1 start */ ++ u32 reserved_1 :4; ++ ++ u32 vs1e :12; /* vertical sync 1 end */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* vertical display 1 count */ ++union gc07r { ++ struct { ++ u32 vd_cnt :12; /* vertical display 1 count */ ++ u32 reverved_1 :20; ++ } part; ++ u32 whole; ++}; ++ ++/* horizontal window 1 control */ ++union gc08r { ++ struct { ++ u32 hw1s :12; /* horizontal window 1 start (HW1S) */ ++ u32 reserved_1 :4; ++ ++ u32 hw1w :12; /* horizontal window 1 width (HW1W) */ ++ u32 w1ald :4; /* window 1 additional line data */ ++ } part; ++ u32 whole; ++}; ++ ++/* vertical window 1 control */ ++union gc09r { ++ struct { ++ u32 vw1s :12; /* vertical window 1 start */ ++ u32 reserved_1 :4; ++ u32 vw1h :12; /* vertical window 1 height */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* window 1 start address */ ++union gc0cr { ++ struct { ++ u32 w1sa :21; /* window 1 start address */ ++ u32 reserved_1 :11; ++ } part; ++ u32 whole; ++}; ++ ++/* window 1 stride */ ++union gc0er { ++ struct { ++ s16 w1st; /* window 1 stride */ ++ s16 aw1st; /* alternate window 1 stride */ ++ } part; ++ u32 whole; ++}; ++ ++/* hardware cursor 1 position */ ++union gc10r { ++ struct { ++ u32 hc1s :12; /* horizontal cursor 1 start */ ++ u32 reserved_1 :4; ++ u32 vc1s :12; /* vertical cursor 1 start */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* hardware cursor 1 start address and offset */ ++union gc11r { ++ struct { ++ u32 hc1sa :11; /* hardware cursor 1 start address */ ++ u32 reserved_1 :5; ++ u32 hc1o :6; /* horizontal cursor 1 offset */ ++ u32 reserved_2 :2; ++ u32 vc1o :6; /* vertical cursor 1 offset */ ++ u32 reserved_3 :2; ++ } part; ++ u32 whole; ++}; ++ ++/* hardware cursor 1 foreground color */ ++union gc12r { ++ struct { ++ u32 hc1fc :24; /* hardware cursor 1 foreground color */ ++ u32 reserved_1 :8; ++ } part; ++ u32 whole; ++}; ++ ++/* hardware cursor 1 background color */ ++union gc13r { ++ struct { ++ u32 hc1bc :24; /* hardware cursor 1 background color */ ++ u32 reserved_1 :8; ++ } part; ++ u32 whole; ++}; ++ ++/* primary drawing command register */ ++union ge00r { ++ struct { ++ u32 rop :8; /* raster operation */ ++ /**/ ++ u32 cmd_typ :3; /* command type */ ++ u32 x_dir :1; /* x direction */ ++ u32 y_dir :1; /* y direction */ ++ u32 src_mem :1; /* source memory */ ++ u32 mon_src :1; /* mono source */ ++ u32 mon_ptn :1; /* mono pattern */ ++ /**/ ++ u32 dst_trns_e :1; /* destination transparency enable */ ++ u32 dst_trns_p :1; /* destination transparency polarity */ ++ u32 mon_trns_e :1; /* mono source or mono pattern transparency ++ enable */ ++ u32 mon_trns_p :1; /* mono transparency polarity */ ++ u32 mod_sel :1; /* memory to screen or off screen to screen ++ mode select */ ++ u32 alpha_sel :2; /* Alpha byte mask selection */ ++ u32 sol_col :1; /* solid color */ ++ /**/ ++ u32 stride_eq :1; /* source stride is equal to destination ++ stride */ ++ u32 rop2_sel :1; /* ROP2 code selection */ ++ u32 clipping :1; /* enable clipping */ ++ u32 auto_exec :1; /* auto execute */ ++ u32 reserved_1 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* primary width and height register */ ++union ge01r { ++ struct { ++ u32 width :12; /* source/destination window width */ ++ u32 reserved_1 :4; ++ ++ u32 height :12; /* source/destination window height */ ++ u32 reserved_2 :1; ++ u32 reserved_3 :3; ++ } bitblt; ++ struct { ++ u32 dm :17; ++ u32 axis_major :12; ++ u32 x_y :1; /* x-major or y-major */ ++ u32 last_pix :1; /* decision to draw or not to draw the last ++ pixel of the line */ ++ u32 reserved_1 :1; ++ } bresenham; ++ u32 whole; ++}; ++ ++/* primary destination address register */ ++union ge02r { ++ struct { ++ u32 dst_x :12; /* destination x position */ ++ u32 reserved_1 :1; ++ u32 h_offset :3; /* mono/color pattern horizontal offset */ ++ ++ u32 dst_y :12; /* destination y position */ ++ u32 reserved_2 :1; ++ u32 v_offset :3; /* mono/color pattern vertical offset */ ++ } window; ++ struct { ++ u32 x :12; /* starting x coordinate */ ++ u32 dm :17; /* 17 bits major-axis delta */ ++ u32 reserved_1 :3; ++ } line; ++ u32 whole; ++}; ++ ++/* source XY register/line draw starting Y coordinate and mintor axis delta */ ++union ge03r { ++ struct { ++ u32 src_x :12; /* source X position */ ++ u32 reserved_1 :4; ++ ++ u32 src_y :12; /* source Y position */ ++ u32 reserved_2 :4; ++ } window; ++ struct { ++ u32 start_y :12; /* starting Y coordinate */ ++ u32 dn :17; /* 17 bits minor-axis delta */ ++ u32 reserved_1 :3; ++ } line; ++ u32 whole; ++}; ++ ++/* clip left/top register */ ++union ge05r { ++ struct { ++ u32 left :12; /* left edge of clipping rectangle */ ++ u32 reserved_1 :4; ++ ++ u32 top :12; /* top edge of clipping rectangle */ ++ u32 reserved_2 :4; ++ } part; ++ u32 whole; ++}; ++ ++/* source stride/offset register */ ++union ge09r { ++ struct { ++ u32 src_strid :12; /* source line stride */ ++ u32 reserved_1 :13; ++ u32 strt_bit :3; /* initial mono source bit offset */ ++ u32 strt_byte :3; /* initial mono/color source byte offset */ ++ u32 reserved_2 :1; ++ } line; ++ struct { ++ u32 strt_bit :5; /* initial mono source bit offset */ ++ u32 reserved_1 :1; ++ u32 amount :10; /* number of 16 bytes amount that MIU need ++ to fetch from frame buffer */ ++ ++ u32 reserved_2 :9; ++ u32 bit_spc :7; /* bit space between lines */ ++ } pack_mono; ++ struct { ++ u32 strt_bit :3; /* initial mono source bit offset */ ++ u32 strt_byte :3; /* initial mono/color source byte offset */ ++ u32 amount :10; /* number of 16 bytes amount that MIU need ++ to fetch from frame buffer */ ++ ++ u32 reserved_1 :9; ++ u32 bit_spc :3; /* bit space between lines */ ++ u32 byt_spc :4; /* byte space between lines */ ++ } pack_color; ++ u32 whole; ++}; ++ ++/* destination stride register and color depth */ ++union ge0ar { ++ struct { ++ u32 dst_strid :12; /* destination line stride and color depth */ ++ u32 reserved_1 :18; ++ u32 col_dpth :2; /* color depth */ ++ } part; ++ u32 whole; ++}; ++ ++/* graphics controller color pallete */ ++union c1xxr { ++ struct { ++ u8 red; /* red color pallete */ ++ u8 green; /* green/gray color pallete */ ++ u8 blue; /* blue color palette */ ++ u8 reserved_1; ++ } part; ++ u32 whole; ++}; ++ ++/* devicee configuration register 0 */ ++union dc00r { ++ struct { ++ u32 osc_bypass :1; /* oscillator bypass */ ++ u32 osc_enbl :1; /* oscillator enable */ ++ u32 pll1_bypass :1; /* PLL1 bypass */ ++ u32 pll1_enbl :1; /* PLL1 enable */ ++ u32 pll1_p_par :3; /* PLL1 P parameter */ ++ u32 cpu_div :1; /* CPU interface clock divisor */ ++ u32 pll1_n_par :5; /* PLL1 N parameter */ ++ u32 saisc :1; /* StrongARM interface synchronizer control */ ++ u32 s_chp_reset :1; /* software chip reset */ ++ u32 mem_enbl :1; /* memory standby enable */ ++ u32 pll1_m_par :8; /* PLL 1 M parameter */ ++ u32 osc_shaper :1; /* oscillator shaper disable */ ++ u32 fast_pwr :1; /* fast power sequencing */ ++ u32 osc_frq :2; /* oscillator frequency select */ ++ u32 pll1_trim :4; /* PLL 1 trim value */ ++ } part; ++ u32 whole; ++}; ++ ++/* device ID/vendor ID register */ ++union pc00r { ++ struct { ++ u16 device; /* device ID */ ++ u16 vendor; /* vendor ID */ ++ } part; ++ u32 whole; ++}; ++ ++/* Flat Panel Control Register */ ++union fp00r { ++ struct { ++ u32 flatp_enbl : 2; /* Flat Panel Interface Enable */ ++ u32 flatp_type : 2; /* Flat Panel Type */ ++ u32 mono : 1; /* Mono/Color Panel Select */ ++ u32 flatp_intf : 3; /* Flat Panel Interface */ ++ u32 dither_pat : 2; /* Dither Pattern */ ++ u32 reserved : 2; /* Reserved Must Be 0*/ ++ u32 dither_col : 3; /* Dither Base Color */ ++ u32 alt_win_ctl: 1; /* Alternate Window Control */ ++ u32 frc_ctl : 2; /* FRC Control */ ++ u32 dither_adj1: 6; /* Dither Pattern Adjust 1 */ ++ u32 dither_adj2: 3; /* Dither Pattern Adjust 2 */ ++ u32 dither_adj3: 1; /* Dither Pattern Adjust 3 */ ++ u32 test_mode0 : 1; /* Test Mode 0 */ ++ u32 test_mode1 : 1; /* Test Mode 1 */ ++ u32 test_mode2 : 1; /* Test Mode 2 */ ++ u32 test_mode3 : 1; /* Test Mode 3 */ ++ } part; ++ u32 whole; ++}; ++ ++union fp01r { ++ struct { ++ u32 dummy; ++ } part; ++ u32 whole; ++}; ++ ++union fp02r { ++ struct { ++ u32 dummy; ++ } part; ++ u32 whole; ++}; ++ ++union fp03r { ++ struct { ++ u32 dummy; ++ } part; ++ u32 whole; ++}; ++ ++union fp04r { ++ struct { ++ u32 dummy; ++ } part; ++ u32 whole; ++}; ++ ++union fp05r { ++ struct { ++ u32 dummy; ++ } part; ++ u32 whole; ++}; ++ ++union fp0fr { ++ struct { ++ u32 dummy; ++ } part; ++ u32 whole; ++}; ++ ++ ++ ++ ++/**** ++ * Others ++ */ ++ ++#define CHIPNAME "MQ-200" ++ ++extern void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr); ++extern void mq200_external_setqmode(struct mq200_monitor_info*, unsigned long, spinlock_t *); ++extern void mq200_external_offdisplay(unsigned long); ++extern void mq200_external_ondisplay (unsigned long); ++extern int mq200_external_probe(unsigned long); ++ ++ ++ ++#endif +diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq_external.c linux-2.6.20/drivers/video/mq200/mq_external.c +--- linux-2.6.20.vanilla/drivers/video/mq200/mq_external.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/drivers/video/mq200/mq_external.c 2007-02-11 16:41:09.000000000 +0100 +@@ -0,0 +1,427 @@ ++/* ++ * Copyright (C) 2005 Holger Hans Peter Freyther ++ * ++ * Based ON: ++ * ++ * linux/drivers/video/mq200fb.c -- MQ-200 for a frame buffer device ++ * based on linux/driver/video/pm2fb.c ++ * ++ * Copyright (C) 2000 Lineo, Japan ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ */ ++ ++#include <asm/types.h> ++#include <asm/io.h> ++#include <linux/delay.h> ++#include <linux/spinlock.h> ++ ++#include "mq200_data.h" ++ ++ ++#if 1 ++#define PRINTK(args...) printk(args) ++#else ++#define PRINTK(args...) ++#endif ++ ++ ++/**** ++ * power state transition to "state". ++ */ ++static void ++power_state_transition(unsigned long register_base, int state) ++{ ++ int i; ++ writel(state, PMCSR(register_base)); ++ for (i = 1; ; i++) { ++ udelay(100); ++ if ((readl(PMCSR(register_base)) & 0x3) == state) { ++ break; ++ } ++ } ++} ++ ++ ++/**** ++ * device configuration initialization. ++ */ ++static void ++dc_reset(unsigned long register_base) ++{ ++ union dc00r dc00r; ++ ++ /* Reset First */ ++ dc00r.whole = DC_RESET; ++ writel(dc00r.whole, DC00R(register_base)); ++ udelay(10); ++ ++ ++ dc00r.whole = 0xEF2082A; ++ writel(dc00r.whole, DC00R(register_base)); ++ udelay(5); ++ PRINTK(CHIPNAME ": DC00R = %xx\n", readl(DC00R(register_base))); ++} ++ ++ ++/**** ++ * initialize memory interface unit. ++ */ ++static void ++miu_reset(unsigned long register_base) ++{ ++ union mm00r mm00r; ++ union mm01r mm01r; ++ union mm02r mm02r; ++ union mm03r mm03r; ++ union mm04r mm04r; ++ ++ /* MIU interface control 1 */ ++ mm00r.whole = 0x4; ++ writel(mm00r.whole, MM00R(register_base)); ++ udelay(5); ++ writel(0, MM00R(register_base)); ++ udelay(50); ++ ++ /* MIU interface control 2 ++ * o PLL 1 output is used as memory clock source. ++ */ ++ mm01r.whole = 0x4143e086; ++ writel(mm01r.whole, MM01R(register_base)); ++ ++ /* memory interface control 3 */ ++ mm02r.whole = 0x6d6aabff; ++ writel(mm02r.whole, MM02R(register_base)); ++ ++ /* memory interface control 5 */ ++ mm04r.whole = 0x10d; ++ writel(mm04r.whole, MM04R(register_base)); ++ ++ /* memory interface control 4 */ ++ mm03r.whole = 0x1; ++ writel(mm03r.whole, MM03R(register_base)); ++ mdelay(10); ++ ++ /* MIU interface control 1 */ ++ mm00r.whole = 0x3; ++ writel(mm00r.whole, MM00R(register_base)); ++ mdelay(50); ++} ++ ++/**** ++ * ++ */ ++static ++void fpctrl_reset(unsigned long addr) ++{ ++ /* ++ * We're in D0 State, let us set the FPCTRL ++ */ ++ union fp00r fp00r; ++ union fp01r fp01r; ++ union fp02r fp02r; ++ union fp03r fp03r; ++ union fp04r fp04r; ++ union fp0fr fp0fr; ++ ++ fp00r.whole = 0x6320; ++ writel(fp00r.whole, FP00R(addr)); ++ ++ fp01r.whole = 0x20; ++ writel(fp01r.whole, FP01R(addr)); ++ ++ fp04r.whole = 0xBD0001; ++ writel(fp04r.whole, FP04R(addr)); ++ ++ /* Set Flat Panel General Purpose register first */ ++ fp02r.whole = 0x0; ++ writel(fp02r.whole, FP02R(addr)); ++ ++ fp03r.whole = 0x0; ++ writel(fp03r.whole, FP03R(addr)); ++ ++ fp0fr.whole = 0xA16c44; ++ writel(fp0fr.whole, FP0FR(addr)); ++ ++ ++ /* Set them again */ ++ fp02r.whole = 0x0; ++ writel(fp02r.whole, FP02R(addr)); ++ ++ fp03r.whole = 0x0; ++ writel(fp03r.whole, FP03R(addr)); ++} ++ ++ ++/**** ++ * initialize power management unit. ++ */ ++static void ++pmu_reset(unsigned long register_base) ++{ ++ union pm00r pm00r; ++ union pm01r pm01r; ++ union pm02r pm02r; ++// union pm06r pm06r; ++// union pm07r pm07r; ++ ++ /* power management miscellaneous control ++ * o GE is driven by PLL 1 clock. ++ */ ++ pm00r.whole = 0xc0900; ++ writel(pm00r.whole, PM00R(register_base)); ++ ++ /* D1 state control */ ++ pm01r.whole = 0x5000271; ++ writel(pm01r.whole, PM01R(register_base)); ++ ++ /* D2 state control */ ++ pm02r.whole = 0x271; ++ writel(pm02r.whole, PM02R(register_base)); ++ ++#if 0 ++ /* PLL 2 programming */ ++ pm06r.whole = 0xE90830; ++ writel(pm06r.whole, PM06R(register_base)); ++ ++ /* PLL 3 programming */ ++ pm07r.whole = 0xE90830; ++ writel(pm07r.whole, PM07R(register_base)); ++#endif ++} ++ ++/**** ++ * initialize graphics controller 1. ++ */ ++static void ++gc1_reset(unsigned long register_base, spinlock_t *lock ) ++{ ++ unsigned long flags; ++ union gc00r gc00r; ++ union gc01r gc01r; ++ union gc02r gc02r; ++ union gc03r gc03r; ++ union gc04r gc04r; ++ union gc05r gc05r; ++ union gc08r gc08r; ++ union gc09r gc09r; ++// union gc0er gc0er; ++// union gc11r gc11r; ++ union pm00r pm00r; ++ union pm06r pm06r; ++ ++ spin_lock_irqsave(lock, flags); ++ ++ /* graphics controller CRT control */ ++ gc01r.whole = 0x800; ++ writel(gc01r.whole, GC01R(register_base)); ++ ++ /* horizontal display 1 control */ ++ gc02r.whole = 0x320041e; ++ writel(gc02r.whole, GC02R(register_base)); ++ ++ /* vertical display 1 control */ ++ gc03r.whole = 0x2570273; ++ writel(gc03r.whole, GC03R(register_base)); ++ ++ /* horizontal sync 1 control */ ++ gc04r.whole = 0x3c70347; ++ writel(gc04r.whole, GC04R(register_base)); ++ ++ /* vertical sync 1 control */ ++ gc05r.whole = 0x25d0259; ++ writel(gc05r.whole, GC05R(register_base)); ++ ++ /* horizontal window 1 control */ ++ gc08r.whole = 0x131f0000; ++ writel(gc08r.whole, GC08R(register_base)); ++ ++ /* vertical window 1 control */ ++ gc09r.whole = 0x2570000; ++ writel(gc09r.whole, GC09R(register_base)); ++ ++#if 0 ++ /* alternate horizontal window 1 control */ ++ writel(0, GC0AR(register_base)); ++ ++ /* alternate vertical window 1 control */ ++ writel(0, GC0BR(register_base)); ++ ++ /* window 1 start address */ ++ writel(0x2004100, GC0CR(register_base)); ++ ++ /* alternate window 1 start address */ ++ writel(0, GC0DR(register_base)); ++ ++ /* window 1 stride */ ++ gc0er.whole = 0x5100048; ++ writel(gc0er.whole, GC0ER(register_base)); ++ ++ /* reserved register - ??? - */ ++ writel(0x31f, GC0FR(register_base)); ++#endif ++ ++#if 0 ++ /* hardware cursor 1 position */ ++ writel(0, GC10R(register_base)); ++ ++ /* hardware cursor 1 start address and offset */ ++ gc11r.whole = 0x5100048; ++ writel(gc11r.whole, GC11R(register_base)); ++ ++ /* hardware cursor 1 foreground color */ ++ writel(0x00ffffff, GC12R(register_base)); ++ ++ /* hardware cursor 1 background color */ ++ writel(0x00000000, GC13R(register_base)); ++#endif ++ ++ /* PLL 2 programming */ ++ pm06r.whole = 0xE90830; ++ writel(pm06r.whole, PM06R(register_base)); ++ ++ ++ /* graphics controller 1 register ++ * o GC1 clock source is PLL 2. ++ * o hardware cursor is disabled. ++ */ ++ gc00r.whole = 0x10200C8; ++ writel(gc00r.whole, GC00R(register_base)); ++ ++ /* ++ * Enable PLL2 in the PM Register ++ */ ++ pm00r.whole = readl(PM00R(register_base)); ++ pm00r.part.pll2_enbl = 0x1; ++ writel(pm00r.whole, PM00R(register_base)); ++ ++ spin_unlock_irqrestore(lock, flags); ++} ++ ++ ++/**** ++ * initialize graphics engine. ++ */ ++static void ++ge_reset(unsigned long register_base) ++{ ++ /* drawing command register */ ++ writel(0, GE00R(register_base)); ++ ++ /* promary width and height register */ ++ writel(0, GE01R(register_base)); ++ ++ /* primary destination address register */ ++ writel(0, GE02R(register_base)); ++ ++ /* primary source XY register */ ++ writel(0, GE03R(register_base)); ++ ++ /* primary color compare register */ ++ writel(0, GE04R(register_base)); ++ ++ /* primary clip left/top register */ ++ writel(0, GE05R(register_base)); ++ ++ /* primary clip right/bottom register */ ++ writel(0, GE06R(register_base)); ++ ++ /* primary source and pattern offset register */ ++ writel(0, GE07R(register_base)); ++ ++ /* primary foreground color register/rectangle fill color depth */ ++ writel(0, GE08R(register_base)); ++ ++ /* source stride/offset register */ ++ writel(0, GE09R(register_base)); ++ ++ /* destination stride register and color depth */ ++ writel(0, GE0AR(register_base)); ++ ++ /* image base address register */ ++ writel(0, GE0BR(register_base)); ++} ++ ++ ++/**** ++ * initialize Color Palette 1. ++ */ ++static void ++cp1_reset(unsigned long addr_info) ++{ ++ int i; ++ ++ for (i = 0; i < 256; i++) ++ writel(0, C1xxR(addr_info, i)); ++} ++ ++ ++ ++ ++/* ++ * Below functions are called from the skeleton ++ */ ++void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr) ++{ ++ writel(color,C1xxR(addr,regno)); ++} ++ ++void mq200_external_setqmode(struct mq200_monitor_info* info, ++ unsigned long addr, spinlock_t *lock) ++{ ++ dc_reset(addr); /* device configuration */ ++ ++ power_state_transition(addr, 0); /* transition to D0 state */ ++ pmu_reset(addr); /* power management unit */ ++ miu_reset(addr); /* memory interface unit */ ++ ge_reset(addr); /* graphics engine */ ++ fpctrl_reset(addr); /* reset the panel settings */ ++ gc1_reset(addr, lock); /* graphics controller 1 */ ++ cp1_reset(addr); /* color palette 1 */ ++ mq200_external_ondisplay(addr); ++} ++ ++void mq200_external_offdisplay(unsigned long addr) ++{ ++ /* ++ * Move the MQ200 to D3 mode ++ */ ++ power_state_transition(addr, 3); ++} ++ ++/** ++ * to be called after mq200_external_setqmode ++ */ ++void mq200_external_ondisplay (unsigned long addr) ++{ ++ /* ++ * Set the framebuffer details ++ */ ++ #warning FIX HERE AS WELL ++ union gc00r gc00r; ++ union fp00r fp00r; ++ gc00r.whole = readl(GC00R(addr)); ++ fp00r.whole = readl(FP00R(addr)); ++ ++ if(!(gc00r.whole & 0x1)) { ++ gc00r.whole |= 1; ++ writel(gc00r.whole, GC00R(addr)); ++ } ++ ++ fp00r.whole |= 0x01; ++ writel(fp00r.whole, FP00R(addr)); ++} ++ ++int mq200_external_probe(unsigned long addr) ++{ ++ union pc00r pc00r; ++ if(readl(PMR(addr)) != PMR_VALUE) ++ return 0; ++ ++ pc00r.whole = readl(PC00R(addr)); ++ printk(KERN_INFO "mq200 video driver found Vendor:%d Device:%d\n", ++ pc00r.part.device, pc00r.part.vendor); ++ return 1; ++} +diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq_skeleton.c linux-2.6.20/drivers/video/mq200/mq_skeleton.c +--- linux-2.6.20.vanilla/drivers/video/mq200/mq_skeleton.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/drivers/video/mq200/mq_skeleton.c 2007-02-11 16:41:09.000000000 +0100 +@@ -0,0 +1,401 @@ ++/* ++ * Author: Holger Hans Peter Freyther ++ * ++ * ++ * This implements the frame buffer driver interface to communicate ++ * with the kernel. ++ * It uses the mq200 routines from the ucLinux driver from Lineo ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/autoconf.h> ++#include <linux/platform_device.h> ++#include <linux/module.h> ++#include <linux/fb.h> ++#include <linux/types.h> ++#include <linux/spinlock.h> ++ ++#include "mq200_data.h" ++ ++#if CONFIG_SA1100_SIMPAD ++/* ++ * Siemens SIMpad specefic data ++ */ ++#include <asm/arch/simpad.h> ++#include <asm/arch/hardware.h> ++ ++#define MQ200_REGIONS simpad_mq200_regions ++#define MQ200_MONITOR simpad_mq200_panel ++ ++static struct mq200_io_regions simpad_mq200_regions = { ++ .fb_size = MQ200_FB_SIZE, ++ .phys_mmio_base = 0x4be00000, ++ .virt_mmio_base = 0xf2e00000, ++ .phys_fb_base = 0x4b800000, ++ .virt_fb_base = 0xf2800000, ++}; ++ ++static struct mq200_monitor_info simpad_mq200_panel = { ++ .horizontal_res = 800, ++ .vertical_res = 600, ++ .depth = 16, ++ .refresh = 60, ++ .line_length = 1600, ++ .flags = 0x00130004, ++}; ++ ++extern long get_cs3_shadow(void); ++extern void set_cs3_bit(int value); ++extern void clear_cs3_bit(int value); ++#endif ++ ++ ++ ++struct mq200_info { ++ struct fb_info fb_info; ++ struct mq200_io_regions io_regions; ++ struct mq200_monitor_info monitor_info; ++ ++ /* palette */ ++ u32 pseudo_palette[17]; /* 16 colors + 1 in reserve not that well documented... */ ++ spinlock_t lock; ++}; ++ ++ ++ ++static int mq200_blank( int blank_mode, struct fb_info *info ) ++{ ++#ifdef CONFIG_SA1100_SIMPAD ++ if(blank_mode ){ ++ clear_cs3_bit(DISPLAY_ON); ++ }else { ++ set_cs3_bit(DISPLAY_ON); ++ } ++#endif ++ return 0; ++} ++ ++ ++static int mq200_check_var(struct fb_var_screeninfo *var, ++ struct fb_info *info ) ++{ /* TODO do we need sanity checks here */ ++ return 0; ++} ++ ++ ++static int mq200_set_par( struct fb_info *info ) ++{ ++ /* TODO set paraemeter */ ++ return 0; ++} ++ ++static int mq200_setcolreg(unsigned regno, unsigned red, unsigned green, ++ unsigned blue, unsigned transp, ++ struct fb_info *info ) ++{ ++ struct mq200_info *p; ++ unsigned long color; ++ u32* pal = info->pseudo_palette; ++ ++ p = info->par; ++ ++ if(regno > 255 ) ++ return 1; ++ ++ switch( info->var.bits_per_pixel ){ ++ case 16: ++ pal[regno] = ++ ((red & 0xf800) >> 0) | ++ ((green & 0xf800) >> 5) | ((blue & 0xf800) >> 11); ++ break; ++ case 24: ++ pal[regno] = ++ ((red & 0xff00) << 8) | ++ ((green & 0xff00)) | ((blue & 0xff00) >> 8); ++ break; ++ case 32: ++ pal[regno] = ++ ((red & 0xff00) >> 8) | ++ ((green & 0xff00)) | ((blue & 0xff00) << 8); ++ break; ++ default: ++ break; ++ } ++ ++ red &= 0xFF; ++ green &= 0xFF; ++ blue &= 0xFF; ++ ++ color = red | (green << 8) | (blue << 16); ++ mq200_external_setpal(regno, color, p->io_regions.virt_mmio_base); ++ ++ return 0; ++} ++ ++ ++ ++ ++static struct fb_ops mq200_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = mq200_check_var, ++ .fb_set_par = mq200_set_par, ++ .fb_setcolreg = mq200_setcolreg, ++#ifdef FB_SOFT_CURSOR ++ .fb_cursor = soft_cursor, /* FIXME use hardware cursor */ ++#endif ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_blank = mq200_blank, ++}; ++ ++ ++/********************************************************************* ++ * ++ * Device driver and module init code ++ * this will register to the fb layer later ++ * ++ *********************************************************************/ ++static void mq200_internal_init_color( struct fb_bitfield* red, ++ struct fb_bitfield* green, ++ struct fb_bitfield* blue, ++ int bpp ) ++{ ++ switch ( bpp ) ++ { ++ case 16: ++ red->offset = 11; ++ green->offset = 5; ++ blue->offset = 0; ++ ++ red->length = 5; ++ green->length = 6; ++ blue->length = 5; ++ break; ++ case 24: ++ red->offset = 16; ++ green->offset = 8; ++ blue->offset = 0; ++ ++ red->length = 8; ++ green->length = 8; ++ blue->length = 8; ++ break; ++ case 32: ++ red->offset = 0; ++ green->offset = 8; ++ blue->offset = 16; ++ ++ red->length = 8; ++ green->length = 8; ++ blue->length = 8; ++ case 8: /* fall through */ ++ default: ++ red->offset = green->offset = blue->offset = 0; ++ red->length = green->length = blue->length = bpp; ++ break; ++ } ++ ++} ++ ++ ++static struct mq200_info* __init mq200_internal_init_fbinfo(void) ++{ ++ struct mq200_info *info = NULL; ++ ++ info = (struct mq200_info*)kmalloc(sizeof(*info), GFP_KERNEL); ++ if(!info) ++ return NULL; ++ ++ /* ++ * Initialize memory ++ */ ++ memset(info, 0, sizeof(struct mq200_info) ); ++ spin_lock_init(&info->lock); ++ ++ /* set the base IO addresses */ ++ info->io_regions = MQ200_REGIONS; ++ info->monitor_info = MQ200_MONITOR; ++ ++ info->fb_info.screen_base = (char *)info->io_regions.virt_fb_base; ++ ++ /* fb_fix_screeninfo filling */ ++ strcpy(info->fb_info.fix.id, "MQ200_FB" ); ++ info->fb_info.fix.smem_start = info->io_regions.phys_fb_base; ++ info->fb_info.fix.smem_len = info->io_regions.fb_size; /* - CURSOR_IMAGE */ ++ info->fb_info.fix.mmio_start = info->io_regions.phys_mmio_base; ++ info->fb_info.fix.mmio_len = MQ200_REGS_SIZE; ++ info->fb_info.fix.type = FB_TYPE_PACKED_PIXELS; ++ info->fb_info.fix.accel = FB_ACCEL_NONE; ++ info->fb_info.fix.line_length = MQ200_MONITOR_LINE_LENGTH(info); ++ ++ if(MQ200_MONITOR_DEPTH(info) <= 8 ) ++ info->fb_info.fix.visual = FB_VISUAL_PSEUDOCOLOR; ++ else if( MQ200_MONITOR_DEPTH(info) >= 16 ) ++ info->fb_info.fix.visual = FB_VISUAL_DIRECTCOLOR; ++ else ++ panic("Calling mq200 with wrong display data\n"); ++ ++ /* set the variable screen info */ ++ info->fb_info.var.xres = MQ200_MONITOR_HORI_RES(info); ++ info->fb_info.var.yres = MQ200_MONITOR_VERT_RES(info); ++ info->fb_info.var.xres_virtual = MQ200_MONITOR_HORI_RES(info); ++ info->fb_info.var.yres_virtual = MQ200_MONITOR_VERT_RES(info); ++ info->fb_info.var.bits_per_pixel = MQ200_MONITOR_DEPTH(info); ++ ++ mq200_internal_init_color(&info->fb_info.var.red, ++ &info->fb_info.var.green, ++ &info->fb_info.var.blue, ++ MQ200_MONITOR_DEPTH(info) ); ++ ++ info->fb_info.var.transp.length = info->fb_info.var.transp.offset = 0; ++ info->fb_info.var.height = info->fb_info.var.width = -1; ++ ++ info->fb_info.var.vmode = FB_VMODE_NONINTERLACED; ++ info->fb_info.var.pixclock = 10000; ++ info->fb_info.var.left_margin = info->fb_info.var.right_margin = 16; ++ info->fb_info.var.upper_margin = info->fb_info.var.lower_margin = 16; ++ info->fb_info.var.hsync_len = info->fb_info.var.vsync_len = 8; ++ ++ info->fb_info.var.nonstd = 0; ++ info->fb_info.var.activate = FB_ACTIVATE_NOW; ++ info->fb_info.var.accel_flags = 0; ++ ++ return info; ++} ++ ++ ++extern void mq200_register_attributes(struct device* ); ++/* ++ * gets called from the bus ++ * we will register our framebuffer from here ++ */ ++static int __init mq200_probe(struct device *dev) ++{ ++ struct mq200_info *info = NULL; ++ int retv= 0; ++ ++ info = mq200_internal_init_fbinfo(); ++ if(!mq200_external_probe(info->io_regions.virt_mmio_base)) ++ goto error_out; ++ ++ ++ GAFR &= ~(1<<3); ++ GPSR |= (1<<3); ++ GPDR |= (1<<3); ++ ++ mq200_external_setqmode(&info->monitor_info, ++ info->io_regions.virt_mmio_base, ++ &info->lock); ++ ++ info->fb_info.fbops = &mq200_ops; ++ info->fb_info.flags = FBINFO_FLAG_DEFAULT; ++ ++ mq200_check_var(&info->fb_info.var, &info->fb_info ); ++ ++ fb_alloc_cmap(&info->fb_info.cmap, 1 << MQ200_MONITOR_DEPTH(info), 0 ); ++ ++ info->fb_info.pseudo_palette = (void*)info->pseudo_palette; ++ ++ /* save the pointer to the mq200 struct in var */ ++ info->fb_info.par = info; ++ ++ retv = register_framebuffer(&info->fb_info ); ++ if(retv < 0) ++ goto error_out; ++ ++ ++ /* will get unset if retv != 0 */ ++ dev_set_drvdata(dev, info ); ++ return retv; ++ ++/* ++ * Free the info and exit ++ */ ++error_out: ++ kfree(info); ++ return -EINVAL; ++} ++ ++#ifdef CONFIG_PM ++static struct mq200_info* get_mq200_info( struct device *dev) ++{ ++ return dev_get_drvdata(dev); ++} ++ ++static unsigned long get_mmio_base( struct device *dev ) ++{ ++ struct mq200_info *info = get_mq200_info(dev); ++ return info->io_regions.virt_mmio_base; ++} ++ ++static struct mq200_monitor_info* get_monitor_info( struct device *dev) ++{ ++ struct mq200_info *info = get_mq200_info(dev); ++ return &info->monitor_info; ++} ++ ++static spinlock_t* get_spinlock( struct device *dev) ++{ ++ return &get_mq200_info(dev)->lock; ++} ++ ++/* ++ * FIXME: make sure we only call mq200_external_offdisplay only once ++ * a 2nd time will hang the kernel -zecke ++ * ++ * FIXME: save the content of the framebuffer inside dev->saved_state ++ * so on resume we can memcpy it back into the buffer and userspace ++ * does not need to redraw ++ * ++ * functions for suspending and resuming ++ */ ++static int mq200_suspend(struct device *dev, pm_message_t state) ++{ ++ ++ mq200_external_offdisplay( get_mmio_base(dev) ); ++ clear_cs3_bit(DISPLAY_ON); ++ ++ ++ return 0; ++} ++ ++static int mq200_resume(struct device *dev) ++{ ++ unsigned long mem = get_mmio_base(dev); ++ struct mq200_monitor_info *monitor = get_monitor_info(dev); ++ mq200_external_setqmode(monitor, mem, get_spinlock(dev) ); ++ ++ ++ /* ++ * Set display on if it was on ++ */ ++ set_cs3_bit(DISPLAY_ON); ++ ++ return 0; ++} ++ ++ ++#endif ++ ++ ++static struct device_driver mq200fb_driver = { ++ .name = "simpad-mq200", ++ .bus = &platform_bus_type, ++ .probe = mq200_probe, /* will be called after we've registered the driver */ ++ .suspend = mq200_suspend, ++ .resume = mq200_resume ++}; ++ ++int __devinit mq200_init(void) ++{ ++ return driver_register(&mq200fb_driver); ++} ++ ++module_init(mq200_init); ++MODULE_DESCRIPTION("MQ200 framebuffer driver"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Holger Hans Peter Freyther"); diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch new file mode 100644 index 0000000000..cbc2272eb2 --- /dev/null +++ b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch @@ -0,0 +1,227 @@ +diff -uNr linux-2.6.20.vanilla/drivers/mfd/Kconfig linux-2.6.20/drivers/mfd/Kconfig +--- linux-2.6.20.vanilla/drivers/mfd/Kconfig 2007-02-09 18:27:41.000000000 +0100 ++++ linux-2.6.20/drivers/mfd/Kconfig 2007-02-09 19:29:23.000000000 +0100 +@@ -23,4 +23,7 @@ + tristate "Touchscreen interface support" + depends on MCP_UCB1200 && INPUT + ++config MCP_UCB1200_SWITCHES ++ tristate "SIMpad Switches support" ++ depends on MCP_UCB1200 && INPUT + endmenu +diff -uNr linux-2.6.20.vanilla/drivers/mfd/Makefile linux-2.6.20/drivers/mfd/Makefile +--- linux-2.6.20.vanilla/drivers/mfd/Makefile 2007-02-09 18:27:41.000000000 +0100 ++++ linux-2.6.20/drivers/mfd/Makefile 2007-02-09 19:29:23.000000000 +0100 +@@ -6,7 +6,7 @@ + obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o + obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o +- ++obj-$(CONFIG_MCP_UCB1200_SWITCHES) += ucb1x00-switches.o + ifeq ($(CONFIG_SA1100_ASSABET),y) + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o + endif +diff -uNr linux-2.6.20.vanilla/drivers/mfd/ucb1x00-switches.c linux-2.6.20/drivers/mfd/ucb1x00-switches.c +--- linux-2.6.20.vanilla/drivers/mfd/ucb1x00-switches.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20/drivers/mfd/ucb1x00-switches.c 2007-02-09 19:30:34.000000000 +0100 +@@ -0,0 +1,200 @@ ++/* ++ * linux/drivers/mfd/ucb1x00-switches.c ++ * ++ * Copyright (C) 2007 Bernhard Guillon. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License. ++ * ++ * This driver is for the Switches of Siemens SIMpad (CL4,SL4,SLC), T-Sinus-Pad and ++ * Swisscom WP50 devices. ++ * ++ * Six switches are routed to GPIO pins on the UCB1300: S3 -- S8. ++ * ++ * This driver is based on the 2.4 ucb1x00-switches, the 2.6 ucb1x00-assabet ++ * and the ucb1x00-ts driver. ++ * ++ */ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/input.h> ++#include <linux/device.h> ++ ++#include <asm/dma.h> ++ ++#include "ucb1x00.h" ++ ++struct ucb1x00_switches { ++ struct input_dev *idev; ++ struct ucb1x00 *ucb; ++}; ++ ++static void ucb1x00_dev_irq(int idx, void *id) ++{ ++ static unsigned short int last; ++ unsigned short int this; ++ struct ucb1x00_switches *switches = id; ++ struct input_dev *idev = switches->idev; ++ ucb1x00_enable(switches->ucb); ++ ++ //check if it really is a event this is not real neccessary because input dev checkes it itself a second. ++ this=~ucb1x00_io_read(switches->ucb); ++ if (this==last) { ++ return; ++ } ++ ++ last=this; ++ switch (idx) { ++ ++ case 0: ++ ++ if ((this & (1<<0)) != 0) input_report_key(idev, KEY_PROG1, 1); ++ else input_report_key(idev, KEY_PROG1, 0); ++ break; ++ ++ case 1: ++ ++ if ((this & (1<<1)) != 0) input_report_key(idev, KEY_PROG2, 1); ++ else input_report_key(idev, KEY_PROG2, 0); ++ break; ++ ++ case 2: ++ ++ if ((this & (1<<2)) != 0) input_report_key(idev, KEY_UP, 1); ++ else input_report_key(idev, KEY_UP, 0); ++ break; ++ ++ case 3: ++ ++ if ((this & (1<<3)) != 0) input_report_key(idev, KEY_DOWN, 1); ++ else input_report_key(idev, KEY_DOWN, 0); ++ break; ++ ++ case 4: ++ ++ if ((this & (1<<4)) != 0) input_report_key(idev, KEY_LEFT, 1); ++ else input_report_key(idev, KEY_LEFT, 0); ++ break; ++ ++ case 5: ++ ++ if ((this & (1<<5)) != 0) input_report_key(idev, KEY_RIGHT, 1); ++ else input_report_key(idev, KEY_RIGHT, 0); ++ break; ++ ++ default: ++ ++ printk(KERN_DEBUG "switches-ucb1x00 is BUGGY!!! \n"); ++ ++ } ++ ++ ucb1x00_disable_irq(switches->ucb, UCB_IRQ_TSPX, UCB_FALLING); ++ ++} ++ ++static int ucb1x00_switches_add(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_switches *switches; ++ struct input_dev *idev; ++ int err,i; ++ ++ switches = kzalloc(sizeof(struct ucb1x00_switches), GFP_KERNEL); ++ idev = input_allocate_device(); ++ ++ ++ if (!switches || !idev) { ++ err = -ENOMEM; ++ goto fail; ++ } ++ ++ switches->ucb = dev->ucb; ++ ++ ++ idev->private = switches; ++ idev->name = "SIMpad Switches"; ++ idev->id.product = switches->ucb->id; ++ ++ __set_bit(EV_KEY, idev->evbit); ++ __set_bit(EV_REP, idev->evbit); ++ __set_bit(KEY_PROG1, idev->keybit); ++ __set_bit(KEY_PROG2, idev->keybit); ++ __set_bit(KEY_UP, idev->keybit); ++ __set_bit(KEY_DOWN, idev->keybit); ++ __set_bit(KEY_LEFT, idev->keybit); ++ __set_bit(KEY_RIGHT, idev->keybit); ++ ++ err = input_register_device(idev); ++ if (err) ++ goto fail; ++ switches->idev = idev; ++ dev->priv = switches; ++ ++ ucb1x00_enable(switches->ucb); ++ ++ ucb1x00_io_set_dir(switches->ucb, ++ UCB_IO_0 | UCB_IO_1 | UCB_IO_2 | ++ UCB_IO_3 | UCB_IO_4 | UCB_IO_5, ++ UCB_IO_8 | UCB_IO_9); ++ ++ ucb1x00_disable(switches->ucb); ++ ++ for (i = 0; i < 6; ++i) { ++ ucb1x00_enable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING); ++ if (ucb1x00_hook_irq(switches->ucb, i, ucb1x00_dev_irq, switches) < 0) { ++ printk(KERN_ERR "unable to hook IRQ for " ++ "UCB1300 SWITCH_%d\n", i); ++ return -EBUSY; ++ } ++ } ++ ++ return 0; ++ ++fail: ++ input_free_device(idev); ++ kfree(switches); ++ return err; ++ ++} ++ ++static void ucb1x00_switches_remove(struct ucb1x00_dev *dev) ++{ ++ int i; ++ struct ucb1x00_switches *switches = dev->priv; ++ input_unregister_device(switches->idev); ++ ++ for (i = 5; i >= 0; --i) { ++ ++ ucb1x00_disable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING); ++ ++ /* Only error conditions are ENOENT and EINVAL; silently ++ * ignore: ++ */ ++ ucb1x00_free_irq(switches->ucb, i, NULL); ++ ++ } ++ ucb1x00_disable(switches->ucb); ++ kfree(switches); ++} ++ ++static struct ucb1x00_driver ucb1x00_switches_driver = { ++ .add = ucb1x00_switches_add, ++ .remove = ucb1x00_switches_remove, ++}; ++ ++static int __init ucb1x00_switches_init(void) ++{ ++ return ucb1x00_register_driver(&ucb1x00_switches_driver); ++} ++ ++static void __exit ucb1x00_switches_exit(void) ++{ ++ ucb1x00_unregister_driver(&ucb1x00_switches_driver); ++} ++ ++module_init(ucb1x00_switches_init); ++module_exit(ucb1x00_switches_exit); ++ ++MODULE_AUTHOR("Bernhard Guillon <Bernhard.Guillon@opensimpad.org>"); ++MODULE_DESCRIPTION("UCB1x00 Switches driver for Siemens SIMpad"); ++MODULE_LICENSE("GPL"); diff --git a/packages/linux/linux_2.6.20.bb b/packages/linux/linux_2.6.20.bb index ebf520d3d6..f4372186e6 100644 --- a/packages/linux/linux_2.6.20.bb +++ b/packages/linux/linux_2.6.20.bb @@ -8,10 +8,15 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ SRC_URI_append_progear = " \ file://progear_bl-r6.patch;patch=1 \ " +SRC_URI_append_simpad = "\ + file://linux-2.6.20.SIMpad.mq200.patch;patch=1 \ + file://linux-2.6.20.SIMpad.ucb1x00-switches.patch;patch=1 \ + " inherit kernel KERNEL_IMAGETYPE = "bzImage" +KERNEL_IMAGETYPE_simpad = "bzImage" do_configure_prepend() { install -m 0644 ${WORKDIR}/defconfig ${S}/.config |