summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRod Whitby <rod@whitby.id.au>2007-04-11 07:11:36 +0000
committerRod Whitby <rod@whitby.id.au>2007-04-11 07:11:36 +0000
commitcbf858aaeca31c7fd4f56bb334cdefa37ddbddd9 (patch)
tree9ab5a681ad8eeb4afb42e254e7abf6332816535f
parent6ffd9d3b78882f811d014c65cb52bfc9503fb218 (diff)
parent79915835842e69056c7f52eba57a93effb2e1d14 (diff)
merge of '82fb03e3d78d465b8f7903451af35bcae014501c'
and '895242856fcf260e6a8c8b8e33b96b1304232974'
-rw-r--r--MAINTAINERS1
-rw-r--r--packages/meta/meta-sdk-gpe.bb101
-rw-r--r--packages/meta/meta-sdk-sbox-gpe.bb101
-rw-r--r--packages/meta/meta-sdk-sbox.bb15
-rw-r--r--packages/meta/meta-sdk.bb6
-rw-r--r--packages/tasks/task-sdk-base.bb53
-rw-r--r--packages/tasks/task-sdk-sbox-gpe.bb20
-rw-r--r--packages/tasks/task-sdk-sbox.bb5
-rw-r--r--packages/tasks/task-sdk.bb11
-rw-r--r--packages/uboot-utils/files/fw_env.h.patch24
-rw-r--r--packages/uboot-utils/files/turbostation/.mtn2git_empty0
-rw-r--r--packages/uboot-utils/uboot-utils_1.1.2.bb43
-rw-r--r--packages/uboot/u-boot-1.2.0/.mtn2git_empty (renamed from packages/uboot-utils/.mtn2git_empty)0
-rw-r--r--packages/uboot/u-boot-1.2.0/defconfig_lsppchd (renamed from packages/uboot/u-boot-linkstationppc/defconfig_lsppchd)0
-rw-r--r--packages/uboot/u-boot-1.2.0/defconfig_lsppchg (renamed from packages/uboot/u-boot-linkstationppc/defconfig_lsppchg)0
-rw-r--r--packages/uboot/u-boot-1.2.0/env-Makefile.patch (renamed from packages/uboot-utils/files/env-Makefile.patch)0
-rw-r--r--packages/uboot/u-boot-1.2.0/fic-gta01/.mtn2git_empty (renamed from packages/uboot-utils/files/.mtn2git_empty)0
-rw-r--r--packages/uboot/u-boot-1.2.0/fic-gta01/fw_env.config (renamed from packages/uboot-utils/files/fic-gta01/fw_env.config)0
-rw-r--r--packages/uboot/u-boot-1.2.0/fw_env.c.patch (renamed from packages/uboot-utils/files/fw_env.c.patch)0
-rw-r--r--packages/uboot/u-boot-1.2.0/fw_env.config (renamed from packages/uboot-utils/files/fw_env.config)0
-rw-r--r--packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff (renamed from packages/uboot/u-boot-linkstationppc/kurobox_powerpc-20061105_target.gitdiff)0
-rw-r--r--packages/uboot/u-boot-1.2.0/qnap.diff1089
-rw-r--r--packages/uboot/u-boot-1.2.0/tools-Makefile.patch (renamed from packages/uboot-utils/files/tools-Makefile.patch)0
-rw-r--r--packages/uboot/u-boot-1.2.0/turbostation/.mtn2git_empty (renamed from packages/uboot-utils/files/fic-gta01/.mtn2git_empty)0
-rw-r--r--packages/uboot/u-boot-1.2.0/turbostation/fw_env.config7
-rw-r--r--packages/uboot/u-boot-1.2.0/u-boot-kurobox-fdt.patch (renamed from packages/uboot/u-boot-linkstationppc/u-boot-kurobox-fdt.patch)0
-rw-r--r--packages/uboot/u-boot-1.2.0/u-boot-kurobox.patch (renamed from packages/uboot/u-boot-linkstationppc/u-boot-kurobox.patch)0
-rw-r--r--packages/uboot/u-boot-1.2.0/uboot-qnap.diff1100
-rw-r--r--packages/uboot/u-boot-LABEL.2006.06.30.2020/.mtn2git_empty0
-rw-r--r--packages/uboot/u-boot-LABEL.2006.06.30.2020/nohelloworld.patch14
-rw-r--r--packages/uboot/u-boot-linkstationppc/.mtn2git_empty0
-rw-r--r--packages/uboot/u-boot-linkstationppc_git.bb41
-rw-r--r--packages/uboot/u-boot_1.2.0.bb18
-rw-r--r--packages/uboot/u-boot_LABEL.2006.06.30.2020.bb18
-rw-r--r--packages/uboot/uboot-utils_1.2.0.bb (renamed from packages/uboot/uboot-utils_1.1.2.bb)0
35 files changed, 2504 insertions, 163 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index eeb6980b26..a490d15683 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -51,6 +51,7 @@ Interests: GPEPhone, OpenSync, GPE, Matchbox, *dbus*, X, sqlite
Recipes: gpe-*, libgpe*, libeventdb, libtododb, libcontactsdb, xserver-common
Recipes: gomunicator, mbmerlin, prismstumbler gkdial, fbreader, networkmanager
Recipes: minimix, minilite, miniclipboard, gpephone*
+Recipes: task-sdk-sbox, meta-sdk-sbox
Person: Graeme Gregory
Mail: dp@xora.org.uk
diff --git a/packages/meta/meta-sdk-gpe.bb b/packages/meta/meta-sdk-gpe.bb
new file mode 100644
index 0000000000..5dd6b5cc0c
--- /dev/null
+++ b/packages/meta/meta-sdk-gpe.bb
@@ -0,0 +1,101 @@
+DESCRIPTION = "Meta package for SDK including GPE"
+LICENSE = "MIT"
+DEPENDS = "ipkg-native ipkg-utils-native fakeroot-native sed-native"
+PR = "r0"
+
+inherit sdk meta
+
+SDK_DIR = "${WORKDIR}/sdk"
+SDK_OUTPUT = "${SDK_DIR}/image"
+SDK_DEPLOY = "${TMPDIR}/deploy/sdk"
+
+IPKG_HOST = "ipkg-cl -f ${SDK_DIR}/ipkg-host.conf -o ${SDK_OUTPUT}"
+IPKG_TARGET = "ipkg-cl -f ${SDK_DIR}/ipkg-target.conf -o ${SDK_OUTPUT}/${prefix}"
+
+HOST_INSTALL = "\
+ binutils-cross-sdk \
+ gcc-cross-sdk \
+ gdb-cross"
+
+TARGET_INSTALL = "\
+ task-sdk-base \
+ task-sdk-x11 \
+ task-sdk-x11-ext \
+ task-sdk-gpe \
+ task-sdk-gpephone"
+
+RDEPENDS = "${TARGET_INSTALL} ${HOST_INSTALL}"
+
+do_populate_sdk() {
+ touch ${DEPLOY_DIR_IPK}/Packages
+ ipkg-make-index -r ${DEPLOY_DIR_IPK}/Packages -p ${DEPLOY_DIR_IPK}/Packages -l ${DEPLOY_DIR_IPK}/Packages.filelist -m ${DEPLOY_DIR_IPK}
+
+ rm -rf ${SDK_OUTPUT}
+ mkdir -p ${SDK_OUTPUT}
+
+ cat <<EOF >${SDK_DIR}/ipkg-host.conf
+src oe file:${DEPLOY_DIR_IPK}
+arch ${BUILD_ARCH} 1
+EOF
+ cat <<EOF >${SDK_DIR}/ipkg-target.conf
+src oe file:${DEPLOY_DIR_IPK}
+EOF
+ ipkgarchs="${PACKAGE_ARCHS}"
+ priority=1
+ for arch in $ipkgarchs; do
+ echo "arch $arch $priority" >> ${SDK_DIR}/ipkg-target.conf
+ priority=$(expr $priority + 5)
+ done
+
+ rm -r ${SDK_OUTPUT}
+ mkdir -p ${SDK_OUTPUT}
+
+ ${IPKG_HOST} update
+ ${IPKG_HOST} -nodeps install ${HOST_INSTALL}
+
+ ${IPKG_TARGET} update
+ ${IPKG_TARGET} install ${TARGET_INSTALL}
+
+ mkdir -p ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}
+ cp -pPR ${SDK_OUTPUT}/${prefix}/usr/* ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}
+ rm -rf ${SDK_OUTPUT}/${prefix}/usr/
+
+ cp -pPR ${SDK_OUTPUT}/${prefix}/lib/* ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/lib
+ rm -rf ${SDK_OUTPUT}/${prefix}/lib/*
+
+ mv ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/lib/gcc* ${SDK_OUTPUT}/${prefix}/lib
+
+ cp -pPR ${TMPDIR}/cross/${TARGET_SYS}/include/linux/ ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/include/
+ cp -pPR ${TMPDIR}/cross/${TARGET_SYS}/include/asm/ ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/include/
+ chmod -R a+r ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/include/
+ find ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/include/ -type d | xargs chmod +x
+
+ echo 'GROUP ( libpthread.so.0 libpthread_nonshared.a )' > ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/lib/libpthread.so
+ echo 'GROUP ( libc.so.6 libc_nonshared.a )' > ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/lib/libc.so
+ # remove unwanted housekeeping files
+ mv ${SDK_OUTPUT}${libdir}/../${TARGET_ARCH}-${TARGET_OS}/lib/ipkg/status ${SDK_OUTPUT}/${prefix}/package-status
+ rm -rf ${SDK_OUTPUT}${libdir}/ipkg
+
+ # remove unwanted executables
+ rm -rf ${SDK_OUTPUT}/${prefix}/sbin ${SDK_OUTPUT}/${prefix}/etc
+
+ # remove broken .la files
+ rm ${SDK_OUTPUT}/${prefix}/${TARGET_ARCH}-${TARGET_OS}/lib/*.la
+
+ # fix pkgconfig data files
+ cd ${SDK_OUTPUT}/${prefix}/${TARGET_ARCH}-${TARGET_OS}/lib/pkgconfig
+ for f in *.pc ; do
+ sed -i 's%=/usr%=${prefix}/${TARGET_ARCH}-${TARGET_OS}%g' "$f"
+ done
+ for f in *.pc ; do
+ sed -i 's%${STAGING_DIR}%/usr/local/${TARGET_ARCH}/oe%g' "$f"
+ done
+
+ mkdir -p ${SDK_DEPLOY}
+ cd ${SDK_OUTPUT}
+ fakeroot tar cfj ${SDK_DEPLOY}/${DISTRO}-${DISTRO_VERSION}-${TARGET_ARCH}-oe-sdk-${DATE}.tar.bz2 .
+}
+
+do_populate_sdk[nostamp] = "1"
+do_populate_sdk[recrdeptask] = "do_package_write"
+addtask populate_sdk before do_build after do_install
diff --git a/packages/meta/meta-sdk-sbox-gpe.bb b/packages/meta/meta-sdk-sbox-gpe.bb
new file mode 100644
index 0000000000..a66989b3aa
--- /dev/null
+++ b/packages/meta/meta-sdk-sbox-gpe.bb
@@ -0,0 +1,101 @@
+DESCRIPTION = "Meta package for a Scratchbox GPE SDK"
+LICENSE = "MIT"
+PACKAGES = ""
+PR = "r0"
+
+inherit rootfs_ipk sdk meta
+
+SDK_DIR = "${WORKDIR}/sdk"
+SDK_OUTPUT = "${SDK_DIR}/image"
+SDK_DEPLOY = "${DEPLOY_DIR}/sdk"
+prefix = "/"
+exec_prefix = "${prefix}"
+base_prefix = "${exec_prefix}"
+FILES_${PN} = "${prefix}"
+
+TARGET_INSTALL = "\
+ task-sdk-base \
+ task-sdk-sbox \
+ task-sdk-sbox-gpe \
+ task-sdk-x11 \
+ task-sdk-x11-ext \
+ task-sdk-gpe \
+ task-sdk-gpephone"
+
+DEPENDS = "ipkg-native ipkg-utils-native fakeroot-native sed-native"
+RDEPENDS = "${TARGET_INSTALL}"
+
+
+IPKG_TARGET = "ipkg-cl -f ${SDK_DIR}/ipkg-target.conf -o ${SDK_OUTPUT}/${prefix}"
+
+do_populate_sdk() {
+
+ set -ex
+ rootfs_ipk_do_indexes
+ set +ex
+
+ rm -rf ${SDK_OUTPUT}
+ mkdir -p ${SDK_OUTPUT}
+
+ cat <<EOF >${SDK_DIR}/ipkg-target.conf
+src oe file:${DEPLOY_DIR_IPK}
+EOF
+ ipkgarchs="${PACKAGE_ARCHS}"
+ priority=1
+ for arch in $ipkgarchs; do
+ echo "arch $arch $priority" >> ${SDK_DIR}/ipkg-target.conf
+ priority=$(expr $priority + 5)
+ if [ -e ${DEPLOY_DIR_IPK}/$arch/Packages ] ; then
+ echo "src oe-$arch file:${DEPLOY_DIR_IPK}/$arch" >> ${SDK_DIR}/ipkg-target.conf
+ fi
+ done
+
+ rm -r ${SDK_OUTPUT}
+ mkdir -p ${SDK_OUTPUT}
+
+ ${IPKG_TARGET} update
+ ${IPKG_TARGET} install ${TARGET_INSTALL}
+
+ mkdir -p ${SDK_OUTPUT}/${prefix}/usr/include
+ #cp -pPR ${SDK_OUTPUT}/${prefix}/usr/* ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}
+ #rm -rf ${SDK_OUTPUT}/${prefix}/usr/
+
+ #cp -pPR ${SDK_OUTPUT}/${prefix}/lib/* ${SDK_OUTPUT}/${prefix}/${TARGET_SYS}/lib
+ #rm -rf ${SDK_OUTPUT}/${prefix}/lib/*
+
+ cp -pPR ${TMPDIR}/cross/${TARGET_SYS}/include/linux/ ${SDK_OUTPUT}/${prefix}/usr/include/
+ cp -pPR ${TMPDIR}/cross/${TARGET_SYS}/include/asm/ ${SDK_OUTPUT}/${prefix}/usr/include/
+ chmod -R a+r ${SDK_OUTPUT}/${prefix}/usr/include/
+ find ${SDK_OUTPUT}/${prefix}/usr/include/ -type d | xargs chmod +x
+
+ echo 'GROUP ( libpthread.so.0 libpthread_nonshared.a )' > ${SDK_OUTPUT}/${prefix}/lib/libpthread.so
+ echo 'GROUP ( libc.so.6 libc_nonshared.a )' > ${SDK_OUTPUT}/${prefix}/lib/libc.so
+ # remove unwanted housekeeping files
+ mv ${SDK_OUTPUT}${libdir}/../*/lib/ipkg/status ${SDK_OUTPUT}/${prefix}/package-status
+ rm -rf ${SDK_OUTPUT}${libdir}/ipkg
+
+ # remove unwanted executables
+ rm -rf ${SDK_OUTPUT}/${prefix}/sbin ${SDK_OUTPUT}/${prefix}/etc
+
+ # fixup libtool files
+ rm ${SDK_OUTPUT}/${prefix}/usr/lib/*.la
+ #cd ${SDK_OUTPUT}/${prefix}/usr/lib/
+ #for f in *.la ; do
+ # sed -i 's%${STAGING_DIR}/${TARGET_SYS}%/usr/%g' "$f"
+ #done
+
+
+ # fix pkgconfig data files
+ cd ${SDK_OUTPUT}/${prefix}/usr/lib/pkgconfig
+ for f in *.pc ; do
+ sed -i 's%${STAGING_DIR}%/usr/%g' "$f"
+ done
+
+ mkdir -p ${SDK_DEPLOY}
+ cd ${SDK_OUTPUT}
+ fakeroot tar cfz ${SDK_DEPLOY}/${DISTRO}-${DISTRO_VERSION}-${TARGET_ARCH}-sbox-sdk-${DATE}.tar.gz .
+}
+
+do_populate_sdk[nostamp] = "1"
+do_populate_sdk[recrdeptask] = "do_package_write"
+addtask populate_sdk before do_build after do_install
diff --git a/packages/meta/meta-sdk-sbox.bb b/packages/meta/meta-sdk-sbox.bb
index 1e96e76d5a..c0cb27d404 100644
--- a/packages/meta/meta-sdk-sbox.bb
+++ b/packages/meta/meta-sdk-sbox.bb
@@ -1,7 +1,7 @@
DESCRIPTION = "Meta package for a Scratchbox SDK"
LICENSE = "MIT"
PACKAGES = ""
-PR = "r5"
+PR = "r6"
inherit rootfs_ipk sdk meta
@@ -14,7 +14,7 @@ base_prefix = "${exec_prefix}"
FILES_${PN} = "${prefix}"
TARGET_INSTALL = "\
- task-sdk-base \
+ task-sdk-bare \
task-sdk-sbox \
"
@@ -74,11 +74,12 @@ EOF
rm -rf ${SDK_OUTPUT}/${prefix}/sbin ${SDK_OUTPUT}/${prefix}/etc
# fixup libtool files
- cd ${SDK_OUTPUT}/${prefix}/lib/
- for f in *.la ; do
- sed -i 's%${STAGING_DIR}${TARGET_SYS}%/usr/%g' "$f"
- done
-
+ rm ${SDK_OUTPUT}/${prefix}/usr/lib/*.la
+ #cd ${SDK_OUTPUT}/${prefix}/usr/lib/
+ #for f in *.la ; do
+ # sed -i 's%${STAGING_DIR}/${TARGET_SYS}%/usr/%g' "$f"
+ #done
+
# fix pkgconfig data files
cd ${SDK_OUTPUT}/${prefix}/usr/lib/pkgconfig
diff --git a/packages/meta/meta-sdk.bb b/packages/meta/meta-sdk.bb
index 86bb212214..e793c08de0 100644
--- a/packages/meta/meta-sdk.bb
+++ b/packages/meta/meta-sdk.bb
@@ -1,7 +1,7 @@
-DESCRIPTION = "Meta package for SDK including GPE and Opie"
+DESCRIPTION = "Meta package for bare SDK package"
LICENSE = "MIT"
DEPENDS = "ipkg-native ipkg-utils-native fakeroot-native sed-native"
-PR = "r12"
+PR = "r13"
inherit sdk meta
@@ -18,7 +18,7 @@ HOST_INSTALL = "\
gdb-cross"
TARGET_INSTALL = "\
- task-sdk-base \
+ task-sdk-bare \
"
RDEPENDS = "${TARGET_INSTALL} ${HOST_INSTALL}"
diff --git a/packages/tasks/task-sdk-base.bb b/packages/tasks/task-sdk-base.bb
new file mode 100644
index 0000000000..3bf708902f
--- /dev/null
+++ b/packages/tasks/task-sdk-base.bb
@@ -0,0 +1,53 @@
+DESCRIPTION = "Basic SDK development packages"
+PR = "r0"
+LICENSE = "MIT"
+ALLOW_EMPTY = "1"
+
+DEPENDS = "task-sdk"
+
+RDEPENDS := "\
+ task-sdk-bare \
+ glibc \
+ glibc-dev \
+ libgcc1 \
+ alsa-dev \
+ audiofile-dev \
+ bluez-libs-dev \
+ dbus-dev \
+ expat-dev \
+ fontconfig-dev \
+ freetype-dev \
+ glib-2.0-dev \
+ gstreamer-dev \
+ libice-dev \
+ ipkg-dev \
+ jpeg-dev \
+ libapm-dev \
+ alsa-lib-dev \
+ libdisplaymigration-dev \
+ libetpan-dev \
+ libgcrypt-dev \
+ libglade-dev \
+ gnutls-dev \
+ libgpg-error-dev \
+ libidl-dev \
+ libiw-dev \
+ libmimedir-dev \
+ libpcap-dev \
+ libpixman-dev \
+ libpng-dev \
+ libschedule-dev \
+ libsm-dev \
+ libsoundgen-dev \
+ libsoup-dev \
+ libsvg-dev \
+ libtododb-dev \
+ libts-dev \
+ libxml2-dev \
+ ncurses-dev \
+ openobex-dev \
+ popt-dev \
+ readline-dev \
+ libsqlite-dev \
+ zlib-dev \
+ libxmu-dev"
diff --git a/packages/tasks/task-sdk-sbox-gpe.bb b/packages/tasks/task-sdk-sbox-gpe.bb
new file mode 100644
index 0000000000..77950dfb01
--- /dev/null
+++ b/packages/tasks/task-sdk-sbox-gpe.bb
@@ -0,0 +1,20 @@
+DESCRIPTION = "SDK task for Scratchbox rootstraps incuding GPE/GTK bits"
+PR = "r0"
+LICENSE = "MIT"
+ALLOW_EMPTY = "1"
+
+RDEPENDS := "\
+ glib-2.0-utils \
+ gdk-pixbuf-loader-png \
+ gdk-pixbuf-loader-jpeg \
+ gdk-pixbuf-loader-gif \
+ gdk-pixbuf-loader-xpm \
+ intltool \
+ intltool-dev \
+ ipkg \
+ ipkg-utils \
+ gettext-dev \
+ pkgconfig-dev \
+ autoconf \
+ automake \
+ "
diff --git a/packages/tasks/task-sdk-sbox.bb b/packages/tasks/task-sdk-sbox.bb
index 3b1051f570..aa8dddfbd8 100644
--- a/packages/tasks/task-sdk-sbox.bb
+++ b/packages/tasks/task-sdk-sbox.bb
@@ -1,5 +1,5 @@
-DESCRIPTION = "SDK task for Scratchbox rootstraps"
-PR = "r5"
+DESCRIPTION = "SDK task for Scratchbox rootstraps incuding GPE/GTK bits"
+PR = "r6"
LICENSE = "MIT"
ALLOW_EMPTY = "1"
@@ -9,4 +9,5 @@ RDEPENDS := "\
sbrsh \
fakeroot \
ipkg \
+ ipkg-utils \
"
diff --git a/packages/tasks/task-sdk.bb b/packages/tasks/task-sdk.bb
index ab64de941c..6e6770c913 100644
--- a/packages/tasks/task-sdk.bb
+++ b/packages/tasks/task-sdk.bb
@@ -5,19 +5,10 @@ ALLOW_EMPTY = "1"
PACKAGES = "\
task-sdk-bare \
- task-sdk-base \
"
RDEPENDS_task-sdk-bare := "\
glibc \
glibc-dev \
libgcc1 \
- "
-
-RDEPENDS_task-sdk-base := "\
- glibc \
- glibc-dev \
- libgcc1 \
- ipkg-dev \
- "
-
+ " \ No newline at end of file
diff --git a/packages/uboot-utils/files/fw_env.h.patch b/packages/uboot-utils/files/fw_env.h.patch
deleted file mode 100644
index 2ef2bb83c4..0000000000
--- a/packages/uboot-utils/files/fw_env.h.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- u-boot-1.1.2.orig/tools/env/fw_env.h 2003-06-27 14:32:49.000000000 -0700
-+++ u-boot-1.1.2/tools/env/fw_env.h 2006-11-16 10:51:01.000000000 -0800
-@@ -27,14 +27,15 @@
- * See included "fw_env.config" sample file (TRAB board)
- * for notes on configuration.
- */
--#define CONFIG_FILE "/etc/fw_env.config"
-
--#define HAVE_REDUND /* For systems with 2 env sectors */
--#define DEVICE1_NAME "/dev/mtd1"
-+/* #define CONFIG_FILE "/etc/fw_env.config" */
-+
-+#undef HAVE_REDUND /* For systems with 2 env sectors */
-+#define DEVICE1_NAME "/dev/mtd/3"
- #define DEVICE2_NAME "/dev/mtd2"
--#define DEVICE1_OFFSET 0x0000
--#define ENV1_SIZE 0x4000
--#define DEVICE1_ESIZE 0x4000
-+#define DEVICE1_OFFSET 0x30000
-+#define ENV1_SIZE 0x10000
-+#define DEVICE1_ESIZE 0x10000
- #define DEVICE2_OFFSET 0x0000
- #define ENV2_SIZE 0x4000
- #define DEVICE2_ESIZE 0x4000
diff --git a/packages/uboot-utils/files/turbostation/.mtn2git_empty b/packages/uboot-utils/files/turbostation/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/uboot-utils/files/turbostation/.mtn2git_empty
+++ /dev/null
diff --git a/packages/uboot-utils/uboot-utils_1.1.2.bb b/packages/uboot-utils/uboot-utils_1.1.2.bb
deleted file mode 100644
index 621a55c964..0000000000
--- a/packages/uboot-utils/uboot-utils_1.1.2.bb
+++ /dev/null
@@ -1,43 +0,0 @@
-DESCRIPTION = "U-boot bootloader OS env. access tools for PPC"
-SECTION = "bootloaders"
-PRIORITY = "optional"
-LICENSE = "GPL"
-DEPENDS = "mtd-utils"
-PR = "r4"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/u-boot/u-boot-${PV}.tar.bz2 \
- file://fw_env.c.patch;patch=1 \
- file://tools-Makefile.patch;patch=1 \
- file://env-Makefile.patch;patch=1 \
- file://fw_env.config"
-
-S = "${WORKDIR}/u-boot-${PV}"
-EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
-TARGET_LDFLAGS = ""
-
-UBOOT_MACHINE ?= "${MACHINE}_config"
-
-inherit base
-
-do_configure() {
- :
-}
-
-do_compile () {
- oe_runmake Sandpoint8240_config
- oe_runmake tools
-}
-
-# install mkimage for the kernel makefile
-do_stage() {
- install -d ${STAGING_BINDIR_NATIVE}
- install -m 755 ${S}/tools/mkimage ${STAGING_BINDIR_NATIVE}/
-}
-
-do_install () {
- install -d ${D}/sbin
- install -d ${D}${sysconfdir}
- install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
- install -m 755 ${S}/tools/env/fw_printenv ${D}/sbin/fw_printenv
- install -m 755 ${S}/tools/env/fw_printenv ${D}/sbin/fw_setenv
-}
diff --git a/packages/uboot-utils/.mtn2git_empty b/packages/uboot/u-boot-1.2.0/.mtn2git_empty
index e69de29bb2..e69de29bb2 100644
--- a/packages/uboot-utils/.mtn2git_empty
+++ b/packages/uboot/u-boot-1.2.0/.mtn2git_empty
diff --git a/packages/uboot/u-boot-linkstationppc/defconfig_lsppchd b/packages/uboot/u-boot-1.2.0/defconfig_lsppchd
index 5919f5eb2c..5919f5eb2c 100644
--- a/packages/uboot/u-boot-linkstationppc/defconfig_lsppchd
+++ b/packages/uboot/u-boot-1.2.0/defconfig_lsppchd
diff --git a/packages/uboot/u-boot-linkstationppc/defconfig_lsppchg b/packages/uboot/u-boot-1.2.0/defconfig_lsppchg
index b9943b4c76..b9943b4c76 100644
--- a/packages/uboot/u-boot-linkstationppc/defconfig_lsppchg
+++ b/packages/uboot/u-boot-1.2.0/defconfig_lsppchg
diff --git a/packages/uboot-utils/files/env-Makefile.patch b/packages/uboot/u-boot-1.2.0/env-Makefile.patch
index ad3a6b39a3..ad3a6b39a3 100644
--- a/packages/uboot-utils/files/env-Makefile.patch
+++ b/packages/uboot/u-boot-1.2.0/env-Makefile.patch
diff --git a/packages/uboot-utils/files/.mtn2git_empty b/packages/uboot/u-boot-1.2.0/fic-gta01/.mtn2git_empty
index e69de29bb2..e69de29bb2 100644
--- a/packages/uboot-utils/files/.mtn2git_empty
+++ b/packages/uboot/u-boot-1.2.0/fic-gta01/.mtn2git_empty
diff --git a/packages/uboot-utils/files/fic-gta01/fw_env.config b/packages/uboot/u-boot-1.2.0/fic-gta01/fw_env.config
index 9fe07672c5..9fe07672c5 100644
--- a/packages/uboot-utils/files/fic-gta01/fw_env.config
+++ b/packages/uboot/u-boot-1.2.0/fic-gta01/fw_env.config
diff --git a/packages/uboot-utils/files/fw_env.c.patch b/packages/uboot/u-boot-1.2.0/fw_env.c.patch
index 62f364ad4a..62f364ad4a 100644
--- a/packages/uboot-utils/files/fw_env.c.patch
+++ b/packages/uboot/u-boot-1.2.0/fw_env.c.patch
diff --git a/packages/uboot-utils/files/fw_env.config b/packages/uboot/u-boot-1.2.0/fw_env.config
index 2432bd866c..2432bd866c 100644
--- a/packages/uboot-utils/files/fw_env.config
+++ b/packages/uboot/u-boot-1.2.0/fw_env.config
diff --git a/packages/uboot/u-boot-linkstationppc/kurobox_powerpc-20061105_target.gitdiff b/packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff
index 02027b1062..02027b1062 100644
--- a/packages/uboot/u-boot-linkstationppc/kurobox_powerpc-20061105_target.gitdiff
+++ b/packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff
diff --git a/packages/uboot/u-boot-1.2.0/qnap.diff b/packages/uboot/u-boot-1.2.0/qnap.diff
new file mode 100644
index 0000000000..b9ac34e6a8
--- /dev/null
+++ b/packages/uboot/u-boot-1.2.0/qnap.diff
@@ -0,0 +1,1089 @@
+--- u-boot-1.2.0.vanilla/board/qnap/config.mk 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/config.mk 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,35 @@
++#
++# (C) Copyright 2000, 2001
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++# Valid values for TEXT_BASE are:
++#
++# Standard configuration
++# 0xFFF00000 boot from flash
++#
++# Standard configuration
++# 0xFFF60000 chain boot from flash
++#
++
++
++TEXT_BASE = 0xFFF60000
++
++PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+--- u-boot-1.2.0.vanilla/board/qnap/ide.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/ide.c 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,67 @@
++/*
++ * (C) Copyright 2000
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++ #include <common.h>
++
++#ifdef CFG_CMD_IDE
++#include <ata.h>
++#include <ide.h>
++#include <pci.h>
++
++extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
++extern struct pci_controller hose;
++
++int ide_preinit (void)
++{
++ int status;
++ pci_dev_t devbusfn;
++ int l;
++
++ status = 1;
++ for (l = 0; l < CFG_IDE_MAXBUS; l++) {
++ ide_bus_offset[l] = -ATA_STATUS;
++ }
++ devbusfn = pci_find_device (0x1095, 0x3512, 0);
++
++ if (devbusfn != -1) {
++
++ status = 0;
++
++ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
++ (u32 *) &ide_bus_offset[0]);
++ ide_bus_offset[0] &= 0xfffffffe;
++ ide_bus_offset[0] = pci_hose_bus_to_phys(&hose,
++ ide_bus_offset[0] & 0xfffffffe,
++ PCI_REGION_IO);
++
++ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
++ (u32 *) &ide_bus_offset[1]);
++ ide_bus_offset[1] &= 0xfffffffe;
++ ide_bus_offset[1] = pci_hose_bus_to_phys(&hose,
++ ide_bus_offset[1] & 0xfffffffe,
++ PCI_REGION_IO);
++ }
++ return (status);
++}
++
++#endif /* of CONFIG_CMDS_IDE */
+--- u-boot-1.2.0.vanilla/board/qnap/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/Makefile 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,40 @@
++#
++# (C) Copyright 2000
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(BOARD).a
++
++OBJS = $(BOARD).o ide.o
++
++$(LIB): .depend $(OBJS)
++ $(AR) crv $@ $(OBJS)
++
++#########################################################################
++
++.depend: Makefile $(OBJS:.o=.c)
++ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
++
++sinclude .depend
++
++#########################################################################
+--- u-boot-1.2.0.vanilla/board/qnap/qnap.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/qnap.c 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,126 @@
++/*
++ * Copyright (C) 2006 Andrew Luyten <u-boot@luyten.org.uk>
++ *
++ * Copyright (C) 2000
++ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <common.h>
++#include <mpc824x.h>
++#include <pci.h>
++
++int checkboard (void)
++{
++ ulong busfreq = get_bus_freq(0);
++ char buf[32];
++
++ printf("Board: QNAP TS-101/TS-201 local bus at %s MHz\n", strmhz(buf, busfreq));
++ return 0;
++}
++
++
++long int initdram (int board_type)
++{
++ long size;
++ long new_bank0_end;
++ long mear1;
++ long emear1;
++
++ size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
++
++ new_bank0_end = size - 1;
++ mear1 = mpc824x_mpc107_getreg(MEAR1);
++ emear1 = mpc824x_mpc107_getreg(EMEAR1);
++ mear1 = (mear1 & 0xFFFFFF00) |
++ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
++ emear1 = (emear1 & 0xFFFFFF00) |
++ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
++ mpc824x_mpc107_setreg(MEAR1, mear1);
++ mpc824x_mpc107_setreg(EMEAR1, emear1);
++
++ return (size);
++}
++
++/*
++ * Initialize PCI Devices, report devices found.
++ */
++#ifndef CONFIG_PCI_PNP
++
++static struct pci_config_table pci_qnap_config_table[] = {
++ /* vendor, device, class */
++ /* bus, dev, func */
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0f, 0, /* RTL8110SC or Intel 82540EM */
++ /* Gigabit ethernet controller */
++ pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
++ PCI_ETH_MEMADDR,
++ PCI_COMMAND_IO |
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0d, 0, /* SII3512 */
++ /* SATA controller */
++ pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
++ PCI_IDE_MEMADDR,
++ PCI_COMMAND_IO |
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */
++ pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
++ PCI_USB0_MEMADDR,
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */
++ pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
++ PCI_USB1_MEMADDR,
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */
++ pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
++ PCI_USB2_MEMADDR,
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++ { }
++};
++#endif
++
++struct pci_controller hose = {
++#ifndef CONFIG_PCI_PNP
++ config_table: pci_qnap_config_table,
++#endif
++};
++
++void pci_init_board(void)
++{
++ pci_mpc824x_init(&hose);
++
++ /* Reset USB 1.1 !/
++ out_le32(PCI_USB0_MEMADDR+8, 1);
++ out_le32(PCI_USB1_MEMADDR+8, 1);
++ */
++}
+--- u-boot-1.2.0.vanilla/board/qnap/README 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/README 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,10 @@
++*This port of U-Boot will run on a QNAP TS-101/TS-201 NAS*
++Andrew Luyten (u-boot@luyten.org.uk)
++
++Adapted from a Linkstation port by Mihai Georgian
++http://http://www.linuxnotincluded.org.uk/
++
++Adapted from Motorola Sandpoint 3 development system equipped with
++a Unity X4 PPMC card (MPC8240 CPU) only. It is a snapshot of work
++in progress and far from being completed.
++Thomas Koeller
+--- u-boot-1.2.0.vanilla/board/qnap/u-boot.lds 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/u-boot.lds 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,136 @@
++/*
++ * (C) Copyright 2001
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
++/* Do we need any of these for elf?
++ __DYNAMIC = 0; */
++SECTIONS
++{
++ /* Read-only sections, merged into text segment: */
++ . = + SIZEOF_HEADERS;
++ .interp : { *(.interp) }
++ .hash : { *(.hash) }
++ .dynsym : { *(.dynsym) }
++ .dynstr : { *(.dynstr) }
++ .rel.text : { *(.rel.text) }
++ .rela.text : { *(.rela.text) }
++ .rel.data : { *(.rel.data) }
++ .rela.data : { *(.rela.data) }
++ .rel.rodata : { *(.rel.rodata) }
++ .rela.rodata : { *(.rela.rodata) }
++ .rel.got : { *(.rel.got) }
++ .rela.got : { *(.rela.got) }
++ .rel.ctors : { *(.rel.ctors) }
++ .rela.ctors : { *(.rela.ctors) }
++ .rel.dtors : { *(.rel.dtors) }
++ .rela.dtors : { *(.rela.dtors) }
++ .rel.bss : { *(.rel.bss) }
++ .rela.bss : { *(.rela.bss) }
++ .rel.plt : { *(.rel.plt) }
++ .rela.plt : { *(.rela.plt) }
++ .init : { *(.init) }
++ .plt : { *(.plt) }
++ .text :
++ {
++ cpu/mpc824x/start.o (.text)
++ lib_ppc/board.o (.text)
++ lib_ppc/ppcstring.o (.text)
++ lib_generic/vsprintf.o (.text)
++ lib_generic/crc32.o (.text)
++ lib_generic/zlib.o (.text)
++
++ . = DEFINED(env_offset) ? env_offset : .;
++ common/environment.o (.text)
++
++ *(.text)
++
++ *(.fixup)
++ *(.got1)
++ . = ALIGN(16);
++ *(.rodata)
++ *(.rodata1)
++ *(.rodata.str1.4)
++ *(.eh_frame)
++ }
++ .fini : { *(.fini) } =0
++ .ctors : { *(.ctors) }
++ .dtors : { *(.dtors) }
++
++ /* Read-write section, merged into data segment: */
++ . = (. + 0x0FFF) & 0xFFFFF000;
++ _erotext = .;
++ PROVIDE (erotext = .);
++ .reloc :
++ {
++ *(.got)
++ _GOT2_TABLE_ = .;
++ *(.got2)
++ _FIXUP_TABLE_ = .;
++ *(.fixup)
++ }
++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++ .data :
++ {
++ *(.data)
++ *(.data1)
++ *(.sdata)
++ *(.sdata2)
++ *(.dynamic)
++ CONSTRUCTORS
++ }
++ _edata = .;
++ PROVIDE (edata = .);
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++
++ . = .;
++ __start___ex_table = .;
++ __ex_table : { *(__ex_table) }
++ __stop___ex_table = .;
++
++ . = ALIGN(4096);
++ __init_begin = .;
++ .text.init : { *(.text.init) }
++ .data.init : { *(.data.init) }
++ . = ALIGN(4096);
++ __init_end = .;
++
++ __bss_start = .;
++ .bss :
++ {
++ *(.sbss) *(.scommon)
++ *(.dynbss)
++ *(.bss)
++ *(COMMON)
++ }
++
++ _end = . ;
++ PROVIDE (end = .);
++}
+--- u-boot-1.2.0.vanilla/cpu/mpc824x/cpu.c 2007-01-07 00:13:11.000000000 +0100
++++ u-boot-1.2.0/cpu/mpc824x/cpu.c 2007-02-26 01:55:37.000000000 +0100
+@@ -44,7 +44,11 @@
+ break;
+
+ case CPU_TYPE_8245:
++#ifdef CONFIG_MPC8241
++ puts ("MPC8241"); /* impossible to distinguish using chip registers */
++#else
+ puts ("MPC8245");
++#endif
+ break;
+
+ default:
+--- u-boot-1.2.0.vanilla/drivers/rtl8169.c 2007-01-07 00:13:11.000000000 +0100
++++ u-boot-1.2.0/drivers/rtl8169.c 2007-02-26 01:55:37.000000000 +0100
+@@ -48,7 +48,10 @@
+ *
+ * Indent Options: indent -kr -i8
+ ***************************************************************************/
+-
++/*
++ * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
++ * Modified to use le32_to_cpu and cpu_to_le32 properly
++ */
+ #include <common.h>
+ #include <malloc.h>
+ #include <net.h>
+@@ -68,6 +71,7 @@
+ static u32 ioaddr;
+
+ /* Condensed operations for readability. */
++#define virt_to_bus(addr) cpu_to_le32(addr)
+ #define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
+ #define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
+
+@@ -247,8 +251,15 @@
+ u8 version; /* depend on RTL8169 docs */
+ u32 RxConfigMask; /* should clear the bits supported by this chip */
+ } rtl_chip_info[] = {
+- {"RTL-8169", 0x00, 0xff7e1880,},
+- {"RTL-8169", 0x04, 0xff7e1880,},
++ {"RTL8169", 0x00, 0xff7e1880,},
++ {"RTL8169s/8110s", 0x02, 0xff7e1880,},
++ {"RTL8169s/8110s", 0x04, 0xff7e1880,},
++ {"RTL8169sb/8110sb", 0x10, 0xff7e1880,},
++ {"RTL8169sc/8110sc", 0x18, 0xff7e1880,},
++ {"RTL8168b/8111sb", 0x30, 0xff7e1880,},
++ {"RTL8168b/8111sb", 0x38, 0xff7e1880,},
++ {"RTL8101e", 0x34, 0xff7e1880,},
++ {"RTL8100e", 0x32, 0xff7e1880,},
+ };
+
+ enum _DescStatusBit {
+@@ -315,6 +326,7 @@
+
+ static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_REALTEK, 0x8169},
++ {PCI_VENDOR_ID_REALTEK, 0x8167},
+ {}
+ };
+
+@@ -383,13 +395,15 @@
+ for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){
+ if (tmp == rtl_chip_info[i].version) {
+ tpc->chipset = i;
++ printf ("%s... ", rtl_chip_info[i].name);
+ goto match;
+ }
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8169 in this case */
+ printf("PCI device %s: unknown chip version, assuming RTL-8169\n", dev->name);
+- printf("PCI device: TxConfig = 0x%hX\n", (unsigned long) RTL_R32(TxConfig));
++ printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig));
++
+ tpc->chipset = 0;
+
+ match:
+@@ -413,23 +427,23 @@
+ ioaddr = dev->iobase;
+
+ cur_rx = tpc->cur_rx;
+- if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) {
+- if (!(tpc->RxDescArray[cur_rx].status & RxRES)) {
++ if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
++ if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
+ unsigned char rxdata[RX_BUF_LEN];
+- length = (int) (tpc->RxDescArray[cur_rx].
+- status & 0x00001FFF) - 4;
++ length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
++ status) & 0x00001FFF) - 4;
+
+ memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
+ NetReceive(rxdata, length);
+
+ if (cur_rx == NUM_RX_DESC - 1)
+ tpc->RxDescArray[cur_rx].status =
+- (OWNbit | EORbit) + RX_BUF_SIZE;
++ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
+ else
+ tpc->RxDescArray[cur_rx].status =
+- OWNbit + RX_BUF_SIZE;
++ cpu_to_le32(OWNbit + RX_BUF_SIZE);
+ tpc->RxDescArray[cur_rx].buf_addr =
+- virt_to_bus(tpc->RxBufferRing[cur_rx]);
++ cpu_to_le32((u32)tpc->RxBufferRing[cur_rx]);
+ } else {
+ puts("Error Rx");
+ }
+@@ -454,6 +468,7 @@
+ u8 *ptxb;
+ int entry = tpc->cur_tx % NUM_TX_DESC;
+ u32 len = length;
++ int ret;
+
+ #ifdef DEBUG_RTL8169_TX
+ int stime = currticks();
+@@ -465,39 +480,46 @@
+
+ /* point to the current txb incase multiple tx_rings are used */
+ ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
++#ifdef DEBUG_RTL8169_TX
++ printf("ptxb: %08X, length: %d\n", ptxb, (int)length);
++#endif
+ memcpy(ptxb, (char *)packet, (int)length);
+
+ while (len < ETH_ZLEN)
+ ptxb[len++] = '\0';
+
+- tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb);
++ tpc->TxDescArray[entry].buf_addr = cpu_to_le32((u32)ptxb);
+ if (entry != (NUM_TX_DESC - 1)) {
+ tpc->TxDescArray[entry].status =
+- (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ?
+- len : ETH_ZLEN);
++ cpu_to_le32((OWNbit | FSbit | LSbit) |
++ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
+ } else {
+ tpc->TxDescArray[entry].status =
+- (OWNbit | EORbit | FSbit | LSbit) |
+- ((len > ETH_ZLEN) ? length : ETH_ZLEN);
++ cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
++ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
+ }
+ RTL_W8(TxPoll, 0x40); /* set polling bit */
+
+ tpc->cur_tx++;
+ to = currticks() + TX_TIMEOUT;
+- while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */
++ while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
++ && (currticks() < to)); /* wait */
+
+ if (currticks() >= to) {
+ #ifdef DEBUG_RTL8169_TX
+ puts ("tx timeout/error\n");
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ #endif
+- return 0;
++ ret = 0;
+ } else {
+ #ifdef DEBUG_RTL8169_TX
+ puts("tx done\n");
+ #endif
+- return length;
++ ret = length;
+ }
++ /* Delay to make net console (nc) work properly */
++ udelay(20);
++ return ret;
+ }
+
+ static void rtl8169_set_rx_mode(struct eth_device *dev)
+@@ -564,8 +586,8 @@
+
+ tpc->cur_rx = 0;
+
+- RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray));
+- RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray));
++ RTL_W32(TxDescStartAddr, virt_to_le32desc((u32)tpc->TxDescArray));
++ RTL_W32(RxDescStartAddr, virt_to_le32desc((u32)tpc->RxDescArray));
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+ udelay(10);
+
+@@ -603,13 +625,14 @@
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (i == (NUM_RX_DESC - 1))
+ tpc->RxDescArray[i].status =
+- (OWNbit | EORbit) + RX_BUF_SIZE;
++ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
+ else
+- tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE;
++ tpc->RxDescArray[i].status =
++ cpu_to_le32(OWNbit + RX_BUF_SIZE);
+
+ tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
+ tpc->RxDescArray[i].buf_addr =
+- virt_to_bus(tpc->RxBufferRing[i]);
++ cpu_to_le32((u32)tpc->RxBufferRing[i]);
+ }
+
+ #ifdef DEBUG_RTL8169
+@@ -620,7 +643,7 @@
+ /**************************************************************************
+ RESET - Finish setting up the ethernet interface
+ ***************************************************************************/
+-static void rtl_reset(struct eth_device *dev, bd_t *bis)
++static int rtl_reset(struct eth_device *dev, bd_t *bis)
+ {
+ int i;
+ u8 diff;
+@@ -635,21 +658,27 @@
+ if (tpc->TxDescArrays == 0)
+ puts("Allot Error");
+ /* Tx Desscriptor needs 256 bytes alignment; */
+- TxPhyAddr = virt_to_bus(tpc->TxDescArrays);
++ TxPhyAddr = (u32)tpc->TxDescArrays;
+ diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8));
+ TxPhyAddr += diff;
+ tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff);
++#ifdef DEBUG_RTL8169
++ printf("tpc->TxDescArray: %08X\n", tpc->TxDescArray);
++#endif
+
+ tpc->RxDescArrays = rx_ring;
+ /* Rx Desscriptor needs 256 bytes alignment; */
+- RxPhyAddr = virt_to_bus(tpc->RxDescArrays);
++ RxPhyAddr = (u32)tpc->RxDescArrays;
+ diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8));
+ RxPhyAddr += diff;
+ tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff);
++#ifdef DEBUG_RTL8169
++ printf("tpc->RxDescArray: %08X\n", tpc->RxDescArray);
++#endif
+
+ if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) {
+ puts("Allocate RxDescArray or TxDescArray failed\n");
+- return;
++ return 0;
+ }
+
+ rtl8169_init_ring(dev);
+@@ -669,6 +698,7 @@
+ #ifdef DEBUG_RTL8169
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ #endif
++ return 1;
+ }
+
+ /**************************************************************************
+@@ -733,7 +763,7 @@
+
+ /* Get MAC address. FIXME: read EEPROM */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+- dev->enetaddr[i] = RTL_R8(MAC0 + i);
++ bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i);
+
+ #ifdef DEBUG_RTL8169
+ printf("MAC Address");
+@@ -814,17 +844,14 @@
+ if (option & _1000bpsF) {
+ #ifdef DEBUG_RTL8169
+ printf("%s: 1000Mbps Full-duplex operation.\n",
+- dev->name);
++ dev->name);
+ #endif
+ } else {
+ #ifdef DEBUG_RTL8169
+- printf
+- ("%s: %sMbps %s-duplex operation.\n",
+- dev->name,
+- (option & _100bps) ? "100" :
+- "10",
+- (option & FullDup) ? "Full" :
+- "Half");
++ printf("%s: %sMbps %s-duplex operation.\n",
++ dev->name,
++ (option & _100bps) ? "100" : "10",
++ (option & FullDup) ? "Full" : "Half");
+ #endif
+ }
+ break;
+@@ -886,3 +913,5 @@
+ }
+
+ #endif
++
++/* vim: set ts=4: */
+--- u-boot-1.2.0.vanilla/include/configs/qnap.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/include/configs/qnap.h 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,354 @@
++/*
++ * Copyright (C) 2006 Andrew Luyten <u-boot@luyten.org.uk>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/* ------------------------------------------------------------------------- */
++
++/*
++ * board/config.h - configuration options, board specific
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * High Level Configuration Options
++ * (easy to change)
++ */
++
++#define CONFIG_MPC824X 1
++#define CONFIG_MPC8245 1
++#define CONFIG_MPC8241 1
++
++#define CONFIG_IDENT_STRING " OpenTS(c)"
++#define CONFIG_TIMESTAMP
++#define CFG_HUSH_PARSER 1
++#define CFG_PROMPT_HUSH_PS2 "turbostation> "
++#define CONFIG_BOOTDELAY 3
++
++
++/*----------------------------------------------------------------------
++ * Define supported commands
++ */
++
++#define CONFIG_COMMANDS ( \
++ CONFIG_CMD_DFL | \
++ CFG_CMD_ELF | \
++ CFG_CMD_I2C | \
++ CFG_CMD_PING | \
++ CFG_CMD_DHCP | \
++ CFG_CMD_IDE | \
++ CFG_CMD_EXT2 | \
++ CFG_CMD_DATE | \
++ CFG_CMD_PCI )
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++
++/*-----------------------------------------------------------------------
++ * Miscellaneous configurable options
++ */
++
++#define CFG_LONGHELP 1 /* undef to save memory */
++#define CFG_PROMPT "=> " /* Monitor Command Prompt*/
++#define CFG_CBSIZE 256 /* Console I/O Buffer Size*/
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size*/
++#define CFG_MAXARGS 16 /* max number of command args*/
++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size*/
++#define CFG_LOAD_ADDR 0x00100000 /* default load address */
++#define CFG_HZ 1000 /* decrementer freq:1 ms ticks*/
++
++
++/*-----------------------------------------------------------------------
++ * PCI
++ *
++ */
++
++#define CONFIG_PCI
++#undef CONFIG_PCI_PNP
++
++#define PCI_ETH_IOADDR 0xbffe00
++#define PCI_ETH_MEMADDR 0xbfffce00
++
++#define PCI_IDE_IOADDR 0xbfffd0
++#define PCI_IDE_MEMADDR 0xbffffe00
++
++#define PCI_USB0_IOADDR 0
++#define PCI_USB0_MEMADDR 0xbfffe000
++#define PCI_USB1_IOADDR 0
++#define PCI_USB1_MEMADDR 0xbfffd000
++#define PCI_USB2_IOADDR 0
++#define PCI_USB2_MEMADDR 0xbfffcf00
++
++
++/*-----------------------------------------------------------------------
++ * Start addresses for the final memory configuration
++ * (Set up by the startup code)
++ */
++
++#define CFG_SDRAM_BASE 0x00000000
++#define CFG_MONITOR_BASE TEXT_BASE
++#undef CFG_RAMBOOT
++
++#define CFG_PCI_MEM_ADDR 0xB0000000
++#define CFG_EUMB_ADDR 0xFC000000
++#define CFG_FLASH_BASE 0xFF000000
++
++#define CFG_RESET_ADDRESS 0xFFF00100
++
++#define CFG_MONITOR_LEN (256 << 10)
++#define CFG_MALLOC_LEN (512 << 10)
++
++#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
++#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
++#define CFG_MAX_RAM_SIZE 0x10000000 /* up to 256M of SDRAM */
++
++
++/*-----------------------------------------------------------------------
++ * Definitions for initial stack pointer and data area
++ */
++
++#define CFG_INIT_RAM_ADDR 0x40000000
++#define CFG_INIT_RAM_END 0x1000
++#define CFG_GBL_DATA_SIZE 128
++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++
++/*-----------------------------------------------------------------------
++ * FLASH organization
++ */
++
++#define CFG_FLASH_CFI 1
++#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
++#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip*/
++#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
++#define CFG_FLASH_USE_BUFFER_WRITE /* faster writes */
++
++#define CFG_ENV_IS_IN_FLASH 1
++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00FA0000)
++#define CFG_ENV_SECT_SIZE 0x00020000 /* Total Size of Environment Sector*/
++
++
++/*-----------------------------------------------------------------------
++ * Gigabit Ethernet
++ */
++
++#define CONFIG_NET_MULTI
++#define CONFIG_RTL8169
++
++
++/*-----------------------------------------------------------------------
++ * Filesystems
++ */
++
++#define CONFIG_MAC_PARTITION
++#define CONFIG_DOS_PARTITION
++//#define CONFIG_ISO_PARTITION
++
++
++/*-----------------------------------------------------------------------
++ * IDE/ATA
++ */
++
++#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
++#undef CONFIG_IDE_LED /* no led for ide supported */
++#undef CONFIG_IDE_RESET /* no reset for ide supported */
++#undef CONFIG_ATAPI /* no ATAPI support */
++
++#define CONFIG_IDE_PREINIT /* To set up MMIO adresses */
++#define CONFIG_LBA48 /* Large disk support */
++
++#define CFG_IDE_MAXBUS 2 /* Two channels x 1 device each */
++#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1)
++
++#define CFG_ATA_BASE_ADDR 0x0000 /* Set up in board specific code */
++#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
++#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
++#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
++
++
++/*----------------------------------------------------------------------
++ * On Chip Serial configuration
++ */
++
++#define CONFIG_CONS_INDEX 1
++#define CONFIG_BAUDRATE 115200
++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
++
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++
++#define CFG_NS16550_REG_SIZE 1
++#define CFG_NS16550_CLK get_bus_freq(0)
++
++#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) /* Console port */
++#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) /* PIC ? */
++
++
++/*----------------------------------------------------------------------
++ * i2c support configuration
++ */
++
++#define CONFIG_HARD_I2C 1 /* To enable I2C support */
++#undef CONFIG_SOFT_I2C /* I2C bit-banged */
++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
++#define CFG_I2C_SLAVE 0x7F
++
++#define CONFIG_RTC_RS5C372A /* Real-time clock chip */
++
++
++/*----------------------------------------------------------------------
++ * Low Level Configuration Settings
++ * (address mappings, register initial values, etc.)
++ * You should know what you are doing if you make changes here.
++ */
++
++#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
++
++#define CFG_ROMNAL 7 /*rom/flash next access time */
++#define CFG_ROMFAL 11 /*rom/flash access time */
++
++#define CFG_REFINT 430 /* no of clock cycles between CBR refresh cycles */
++
++/* the following are for SDRAM only*/
++#define CFG_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
++#define CFG_REFREC 8 /* Refresh to activate interval */
++#define CFG_RDLAT 4 /* data latency from read command */
++#define CFG_PRETOACT 3 /* Precharge to activate interval */
++#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
++#define CFG_ACTORW 3 /* Activate to R/W */
++#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
++#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
++
++#define CFG_REGISTERD_TYPE_BUFFER 1
++#define CFG_EXTROM 1
++#define CFG_REGDIMM 0
++
++
++/*----------------------------------------------------------------------
++ * memory bank settings
++ *
++ * only bits 20-29 are actually used from these vales to set the
++ * start/end address the upper two bits will be 0, and the lower 20
++ * bits will be set to 0x00000 for a start address, or 0xfffff for an
++ * end address
++ */
++
++#define CFG_BANK0_START 0x00000000
++#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
++#define CFG_BANK0_ENABLE 1
++#define CFG_BANK1_START 0x3ff00000
++#define CFG_BANK1_END 0x3fffffff
++#define CFG_BANK1_ENABLE 0
++#define CFG_BANK2_START 0x3ff00000
++#define CFG_BANK2_END 0x3fffffff
++#define CFG_BANK2_ENABLE 0
++#define CFG_BANK3_START 0x3ff00000
++#define CFG_BANK3_END 0x3fffffff
++#define CFG_BANK3_ENABLE 0
++#define CFG_BANK4_START 0x00000000
++#define CFG_BANK4_END 0x00000000
++#define CFG_BANK4_ENABLE 0
++#define CFG_BANK5_START 0x00000000
++#define CFG_BANK5_END 0x00000000
++#define CFG_BANK5_ENABLE 0
++#define CFG_BANK6_START 0x00000000
++#define CFG_BANK6_END 0x00000000
++#define CFG_BANK6_ENABLE 0
++#define CFG_BANK7_START 0x00000000
++#define CFG_BANK7_END 0x00000000
++#define CFG_BANK7_ENABLE 0
++
++
++/*
++ * Memory bank enable bitmask, specifying which of the banks defined above
++ are actually present. MSB is for bank #7, LSB is for bank #0.
++ */
++#define CFG_BANK_ENABLE 0x01
++
++#define CFG_ODCR 0xff /* configures line driver impedances, */
++ /* see 8240 book for bit definitions */
++#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
++ /* currently accessed page in memory */
++ /* see 8240 book for details */
++#define CFG_DBUS_SIZE2 1
++#define CFG_BANK0_ROW 2
++
++
++/*----------------------------------------------------------------------
++ * Initial BAT mappings
++ */
++
++/* SDRAM 0 - 256MB */
++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* stack in DCACHE @ 1GB (no backing mem) */
++#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
++
++/* PCI memory */
++#define CFG_IBAT2L (CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
++#define CFG_IBAT2U (CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* Flash, config addrs, etc */
++#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
++#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
++
++#define CFG_DBAT0L CFG_IBAT0L
++#define CFG_DBAT0U CFG_IBAT0U
++#define CFG_DBAT1L CFG_IBAT1L
++#define CFG_DBAT1U CFG_IBAT1U
++#define CFG_DBAT2L CFG_IBAT2L
++#define CFG_DBAT2U CFG_IBAT2U
++#define CFG_DBAT3L CFG_IBAT3L
++#define CFG_DBAT3U CFG_IBAT3U
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
++
++
++/*-----------------------------------------------------------------------
++ * Cache Configuration
++ */
++
++#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
++#endif
++
++
++/*-----------------------------------------------------------------------
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM 0x02 /* Software reboot */
++
++
++#endif /* __CONFIG_H */
+--- u-boot-1.2.0.vanilla/Makefile 2007-01-07 00:13:11.000000000 +0100
++++ u-boot-1.2.0/Makefile 2007-02-26 01:55:37.000000000 +0100
+@@ -1296,6 +1296,9 @@
+ PN62_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
+
++qnap_config: unconfig
++ @$(MKCONFIG) $(@:_config=) ppc mpc824x qnap
++
+ Sandpoint8240_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+
diff --git a/packages/uboot-utils/files/tools-Makefile.patch b/packages/uboot/u-boot-1.2.0/tools-Makefile.patch
index a44bc917d6..a44bc917d6 100644
--- a/packages/uboot-utils/files/tools-Makefile.patch
+++ b/packages/uboot/u-boot-1.2.0/tools-Makefile.patch
diff --git a/packages/uboot-utils/files/fic-gta01/.mtn2git_empty b/packages/uboot/u-boot-1.2.0/turbostation/.mtn2git_empty
index e69de29bb2..e69de29bb2 100644
--- a/packages/uboot-utils/files/fic-gta01/.mtn2git_empty
+++ b/packages/uboot/u-boot-1.2.0/turbostation/.mtn2git_empty
diff --git a/packages/uboot/u-boot-1.2.0/turbostation/fw_env.config b/packages/uboot/u-boot-1.2.0/turbostation/fw_env.config
new file mode 100644
index 0000000000..2432bd866c
--- /dev/null
+++ b/packages/uboot/u-boot-1.2.0/turbostation/fw_env.config
@@ -0,0 +1,7 @@
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundand
+# environment sector is assumed present.
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x0000 0x4000 0x4000
+/dev/mtd2 0x0000 0x4000 0x4000
diff --git a/packages/uboot/u-boot-linkstationppc/u-boot-kurobox-fdt.patch b/packages/uboot/u-boot-1.2.0/u-boot-kurobox-fdt.patch
index 182c3785c7..182c3785c7 100644
--- a/packages/uboot/u-boot-linkstationppc/u-boot-kurobox-fdt.patch
+++ b/packages/uboot/u-boot-1.2.0/u-boot-kurobox-fdt.patch
diff --git a/packages/uboot/u-boot-linkstationppc/u-boot-kurobox.patch b/packages/uboot/u-boot-1.2.0/u-boot-kurobox.patch
index 79f7a8e48a..79f7a8e48a 100644
--- a/packages/uboot/u-boot-linkstationppc/u-boot-kurobox.patch
+++ b/packages/uboot/u-boot-1.2.0/u-boot-kurobox.patch
diff --git a/packages/uboot/u-boot-1.2.0/uboot-qnap.diff b/packages/uboot/u-boot-1.2.0/uboot-qnap.diff
new file mode 100644
index 0000000000..2b2a17da7f
--- /dev/null
+++ b/packages/uboot/u-boot-1.2.0/uboot-qnap.diff
@@ -0,0 +1,1100 @@
+--- u-boot-1.2.0.vanilla/board/qnap/config.mk 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/config.mk 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,35 @@
++#
++# (C) Copyright 2000, 2001
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++# Valid values for TEXT_BASE are:
++#
++# Standard configuration
++# 0xFFF00000 boot from flash
++#
++# Standard configuration
++# 0xFFE60000 chain boot from flash
++#
++
++
++TEXT_BASE = 0xFFE60000
++
++PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+--- u-boot-1.2.0.vanilla/board/qnap/ide.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/ide.c 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,67 @@
++/*
++ * (C) Copyright 2000
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++ #include <common.h>
++
++#ifdef CFG_CMD_IDE
++#include <ata.h>
++#include <ide.h>
++#include <pci.h>
++
++extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
++extern struct pci_controller hose;
++
++int ide_preinit (void)
++{
++ int status;
++ pci_dev_t devbusfn;
++ int l;
++
++ status = 1;
++ for (l = 0; l < CFG_IDE_MAXBUS; l++) {
++ ide_bus_offset[l] = -ATA_STATUS;
++ }
++ devbusfn = pci_find_device (0x1095, 0x3512, 0);
++
++ if (devbusfn != -1) {
++
++ status = 0;
++
++ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
++ (u32 *) &ide_bus_offset[0]);
++ ide_bus_offset[0] &= 0xfffffffe;
++ ide_bus_offset[0] = pci_hose_bus_to_phys(&hose,
++ ide_bus_offset[0] & 0xfffffffe,
++ PCI_REGION_IO);
++
++ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
++ (u32 *) &ide_bus_offset[1]);
++ ide_bus_offset[1] &= 0xfffffffe;
++ ide_bus_offset[1] = pci_hose_bus_to_phys(&hose,
++ ide_bus_offset[1] & 0xfffffffe,
++ PCI_REGION_IO);
++ }
++ return (status);
++}
++
++#endif /* of CONFIG_CMDS_IDE */
+--- u-boot-1.2.0.vanilla/board/qnap/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/Makefile 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,40 @@
++#
++# (C) Copyright 2000
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(BOARD).a
++
++OBJS = $(BOARD).o ide.o
++
++$(LIB): .depend $(OBJS)
++ $(AR) crv $@ $(OBJS)
++
++#########################################################################
++
++.depend: Makefile $(OBJS:.o=.c)
++ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
++
++sinclude .depend
++
++#########################################################################
+--- u-boot-1.2.0.vanilla/board/qnap/qnap.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/qnap.c 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,126 @@
++/*
++ * Copyright (C) 2006 Andrew Luyten <u-boot@luyten.org.uk>
++ *
++ * Copyright (C) 2000
++ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <common.h>
++#include <mpc824x.h>
++#include <pci.h>
++
++int checkboard (void)
++{
++ ulong busfreq = get_bus_freq(0);
++ char buf[32];
++
++ printf("Board: QNAP TS-101/TS-201 local bus at %s MHz\n", strmhz(buf, busfreq));
++ return 0;
++}
++
++
++long int initdram (int board_type)
++{
++ long size;
++ long new_bank0_end;
++ long mear1;
++ long emear1;
++
++ size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
++
++ new_bank0_end = size - 1;
++ mear1 = mpc824x_mpc107_getreg(MEAR1);
++ emear1 = mpc824x_mpc107_getreg(EMEAR1);
++ mear1 = (mear1 & 0xFFFFFF00) |
++ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
++ emear1 = (emear1 & 0xFFFFFF00) |
++ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
++ mpc824x_mpc107_setreg(MEAR1, mear1);
++ mpc824x_mpc107_setreg(EMEAR1, emear1);
++
++ return (size);
++}
++
++/*
++ * Initialize PCI Devices, report devices found.
++ */
++#ifndef CONFIG_PCI_PNP
++
++static struct pci_config_table pci_qnap_config_table[] = {
++ /* vendor, device, class */
++ /* bus, dev, func */
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0f, 0, /* RTL8110SC or Intel 82540EM */
++ /* Gigabit ethernet controller */
++ pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
++ PCI_ETH_MEMADDR,
++ PCI_COMMAND_IO |
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0d, 0, /* SII3512 */
++ /* SATA controller */
++ pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
++ PCI_IDE_MEMADDR,
++ PCI_COMMAND_IO |
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */
++ pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
++ PCI_USB0_MEMADDR,
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */
++ pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
++ PCI_USB1_MEMADDR,
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */
++ pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
++ PCI_USB2_MEMADDR,
++ PCI_COMMAND_MEMORY |
++ PCI_COMMAND_MASTER }},
++ { }
++};
++#endif
++
++struct pci_controller hose = {
++#ifndef CONFIG_PCI_PNP
++ config_table: pci_qnap_config_table,
++#endif
++};
++
++void pci_init_board(void)
++{
++ pci_mpc824x_init(&hose);
++
++ /* Reset USB 1.1 !/
++ out_le32(PCI_USB0_MEMADDR+8, 1);
++ out_le32(PCI_USB1_MEMADDR+8, 1);
++ */
++}
+--- u-boot-1.2.0.vanilla/board/qnap/README 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/README 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,10 @@
++*This port of U-Boot will run on a QNAP TS-101/TS-201 NAS*
++Andrew Luyten (u-boot@luyten.org.uk)
++
++Adapted from a Linkstation port by Mihai Georgian
++http://http://www.linuxnotincluded.org.uk/
++
++Adapted from Motorola Sandpoint 3 development system equipped with
++a Unity X4 PPMC card (MPC8240 CPU) only. It is a snapshot of work
++in progress and far from being completed.
++Thomas Koeller
+--- u-boot-1.2.0.vanilla/board/qnap/u-boot.lds 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.2.0/board/qnap/u-boot.lds 2007-02-26 01:55:37.000000000 +0100
+@@ -0,0 +1,136 @@
++/*
++ * (C) Copyright 2001
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
++/* Do we need any of these for elf?
++ __DYNAMIC = 0; */
++SECTIONS
++{
++ /* Read-only sections, merged into text segment: */
++ . = + SIZEOF_HEADERS;
++ .interp : { *(.interp) }
++ .hash : { *(.hash) }
++ .dynsym : { *(.dynsym) }
++ .dynstr : { *(.dynstr) }
++ .rel.text : { *(.rel.text) }
++ .rela.text : { *(.rela.text) }
++ .rel.data : { *(.rel.data) }
++ .rela.data : { *(.rela.data) }
++ .rel.rodata : { *(.rel.rodata) }
++ .rela.rodata : { *(.rela.rodata) }
++ .rel.got : { *(.rel.got) }
++ .rela.got : { *(.rela.got) }
++ .rel.ctors : { *(.rel.ctors) }
++ .rela.ctors : { *(.rela.ctors) }
++ .rel.dtors : { *(.rel.dtors) }
++ .rela.dtors : { *(.rela.dtors) }
++ .rel.bss : { *(.rel.bss) }
++ .rela.bss : { *(.rela.bss) }
++ .rel.plt : { *(.rel.plt) }
++ .rela.plt : { *(.rela.plt) }
++ .init : { *(.init) }
++ .plt : { *(.plt) }
++ .text :
++ {
++ cpu/mpc824x/start.o (.text)
++ lib_ppc/board.o (.text)
++ lib_ppc/ppcstring.o (.text)
++ lib_generic/vsprintf.o (.text)
++ lib_generic/crc32.o (.text)
++ lib_generic/zlib.o (.text)
++
++ . = DEFINED(env_offset) ? env_offset : .;
++ common/environment.o (.text)
++
++ *(.text)
++
++ *(.fixup)
++ *(.got1)
++ . = ALIGN(16);
++ *(.rodata)
++ *(.rodata1)
++ *(.rodata.str1.4)
++ *(.eh_frame)
++ }
++ .fini : { *(.fini) } =0
++ .ctors : { *(.ctors) }
++ .dtors : { *(.dtors) }
++
++ /* Read-write section, merged into data segment: */
++ . = (. + 0x0FFF) & 0xFFFFF000;
++ _erotext = .;
++ PROVIDE (erotext = .);
++ .reloc :
++ {
++ *(.got)
++ _GOT2_TABLE_ = .;
++ *(.got2)
++ _FIXUP_TABLE_ = .;
++ *(.fixup)
++ }
++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++ .data :
++ {
++ *(.data)
++ *(.data1)
++ *(.sdata)
++ *(.sdata2)
++ *(.dynamic)
++ CONSTRUCTORS
++ }
++ _edata = .;
++ PROVIDE (edata = .);
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++
++ . = .;
++ __start___ex_table = .;
++ __ex_table : { *(__ex_table) }
++ __stop___ex_table = .;
++
++ . = ALIGN(4096);
++ __init_begin = .;
++ .text.init : { *(.text.init) }
++ .data.init : { *(.data.init) }
++ . = ALIGN(4096);
++ __init_end = .;
++
++ __bss_start = .;
++ .bss :
++ {
++ *(.sbss) *(.scommon)
++ *(.dynbss)
++ *(.bss)
++ *(COMMON)
++ }
++
++ _end = . ;
++ PROVIDE (end = .);
++}
+--- u-boot-1.2.0.vanilla/cpu/mpc824x/cpu.c 2007-01-07 00:13:11.000000000 +0100
++++ u-boot-1.2.0/cpu/mpc824x/cpu.c 2007-02-26 01:55:37.000000000 +0100
+@@ -44,7 +44,11 @@
+ break;
+
+ case CPU_TYPE_8245:
++#ifdef CONFIG_MPC8241
++ puts ("MPC8241"); /* impossible to distinguish using chip registers */
++#else
+ puts ("MPC8245");
++#endif
+ break;
+
+ default:
+--- u-boot-1.2.0.vanilla/drivers/rtl8169.c 2007-01-07 00:13:11.000000000 +0100
++++ u-boot-1.2.0/drivers/rtl8169.c 2007-02-26 01:55:37.000000000 +0100
+@@ -48,7 +48,10 @@
+ *
+ * Indent Options: indent -kr -i8
+ ***************************************************************************/
+-
++/*
++ * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
++ * Modified to use le32_to_cpu and cpu_to_le32 properly
++ */
+ #include <common.h>
+ #include <malloc.h>
+ #include <net.h>
+@@ -68,6 +71,7 @@
+ static u32 ioaddr;
+
+ /* Condensed operations for readability. */
++#define virt_to_bus(addr) cpu_to_le32(addr)
+ #define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
+ #define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
+
+@@ -247,8 +251,15 @@
+ u8 version; /* depend on RTL8169 docs */
+ u32 RxConfigMask; /* should clear the bits supported by this chip */
+ } rtl_chip_info[] = {
+- {"RTL-8169", 0x00, 0xff7e1880,},
+- {"RTL-8169", 0x04, 0xff7e1880,},
++ {"RTL8169", 0x00, 0xff7e1880,},
++ {"RTL8169s/8110s", 0x02, 0xff7e1880,},
++ {"RTL8169s/8110s", 0x04, 0xff7e1880,},
++ {"RTL8169sb/8110sb", 0x10, 0xff7e1880,},
++ {"RTL8169sc/8110sc", 0x18, 0xff7e1880,},
++ {"RTL8168b/8111sb", 0x30, 0xff7e1880,},
++ {"RTL8168b/8111sb", 0x38, 0xff7e1880,},
++ {"RTL8101e", 0x34, 0xff7e1880,},
++ {"RTL8100e", 0x32, 0xff7e1880,},
+ };
+
+ enum _DescStatusBit {
+@@ -315,6 +326,7 @@
+
+ static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_REALTEK, 0x8169},
++ {PCI_VENDOR_ID_REALTEK, 0x8167},
+ {}
+ };
+
+@@ -383,13 +395,15 @@
+ for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){
+ if (tmp == rtl_chip_info[i].version) {
+ tpc->chipset = i;
++ printf ("%s... ", rtl_chip_info[i].name);
+ goto match;
+ }
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8169 in this case */
+ printf("PCI device %s: unknown chip version, assuming RTL-8169\n", dev->name);
+- printf("PCI device: TxConfig = 0x%hX\n", (unsigned long) RTL_R32(TxConfig));
++ printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig));
++
+ tpc->chipset = 0;
+
+ match:
+@@ -413,23 +427,23 @@
+ ioaddr = dev->iobase;
+
+ cur_rx = tpc->cur_rx;
+- if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) {
+- if (!(tpc->RxDescArray[cur_rx].status & RxRES)) {
++ if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
++ if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
+ unsigned char rxdata[RX_BUF_LEN];
+- length = (int) (tpc->RxDescArray[cur_rx].
+- status & 0x00001FFF) - 4;
++ length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
++ status) & 0x00001FFF) - 4;
+
+ memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
+ NetReceive(rxdata, length);
+
+ if (cur_rx == NUM_RX_DESC - 1)
+ tpc->RxDescArray[cur_rx].status =
+- (OWNbit | EORbit) + RX_BUF_SIZE;
++ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
+ else
+ tpc->RxDescArray[cur_rx].status =
+- OWNbit + RX_BUF_SIZE;
++ cpu_to_le32(OWNbit + RX_BUF_SIZE);
+ tpc->RxDescArray[cur_rx].buf_addr =
+- virt_to_bus(tpc->RxBufferRing[cur_rx]);
++ cpu_to_le32((u32)tpc->RxBufferRing[cur_rx]);
+ } else {
+ puts("Error Rx");
+ }
+@@ -454,6 +468,7 @@
+ u8 *ptxb;
+ int entry = tpc->cur_tx % NUM_TX_DESC;
+ u32 len = length;
++ int ret;
+
+ #ifdef DEBUG_RTL8169_TX
+ int stime = currticks();
+@@ -465,39 +480,46 @@
+
+ /* point to the current txb incase multiple tx_rings are used */
+ ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
++#ifdef DEBUG_RTL8169_TX
++ printf("ptxb: %08X, length: %d\n", ptxb, (int)length);
++#endif
+ memcpy(ptxb, (char *)packet, (int)length);
+
+ while (len < ETH_ZLEN)
+ ptxb[len++] = '\0';
+
+- tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb);
++ tpc->TxDescArray[entry].buf_addr = cpu_to_le32((u32)ptxb);
+ if (entry != (NUM_TX_DESC - 1)) {
+ tpc->TxDescArray[entry].status =
+- (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ?
+- len : ETH_ZLEN);
++ cpu_to_le32((OWNbit | FSbit | LSbit) |
++ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
+ } else {
+ tpc->TxDescArray[entry].status =
+- (OWNbit | EORbit | FSbit | LSbit) |
+- ((len > ETH_ZLEN) ? length : ETH_ZLEN);
++ cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
++ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
+ }
+ RTL_W8(TxPoll, 0x40); /* set polling bit */
+
+ tpc->cur_tx++;
+ to = currticks() + TX_TIMEOUT;
+- while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */
++ while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
++ && (currticks() < to)); /* wait */
+
+ if (currticks() >= to) {
+ #ifdef DEBUG_RTL8169_TX
+ puts ("tx timeout/error\n");
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ #endif
+- return 0;
++ ret = 0;
+ } else {
+ #ifdef DEBUG_RTL8169_TX
+ puts("tx done\n");
+ #endif
+- return length;
++ ret = length;
+ }
++ /* Delay to make net console (nc) work properly */
++ udelay(20);
++ return ret;
+ }
+
+ static void rtl8169_set_rx_mode(struct eth_device *dev)
+@@ -564,8 +586,8 @@
+
+ tpc->cur_rx = 0;
+
+- RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray));
+- RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray));
++ RTL_W32(TxDescStartAddr, virt_to_le32desc((u32)tpc->TxDescArray));
++ RTL_W32(RxDescStartAddr, virt_to_le32desc((u32)tpc->RxDescArray));
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+ udelay(10);
+
+@@ -603,13 +625,14 @@
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (i == (NUM_RX_DESC - 1))
+ tpc->RxDescArray[i].status =
+- (OWNbit | EORbit) + RX_BUF_SIZE;
++ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
+ else
+- tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE;
++ tpc->RxDescArray[i].status =
++ cpu_to_le32(OWNbit + RX_BUF_SIZE);
+
+ tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
+ tpc->RxDescArray[i].buf_addr =
+- virt_to_bus(tpc->RxBufferRing[i]);
++ cpu_to_le32((u32)tpc->RxBufferRing[i]);
+ }
+
+ #ifdef DEBUG_RTL8169
+@@ -620,7 +643,7 @@
+ /**************************************************************************
+ RESET - Finish setting up the ethernet interface
+ ***************************************************************************/
+-static void rtl_reset(struct eth_device *dev, bd_t *bis)
++static int rtl_reset(struct eth_device *dev, bd_t *bis)
+ {
+ int i;
+ u8 diff;
+@@ -635,21 +658,27 @@
+ if (tpc->TxDescArrays == 0)
+ puts("Allot Error");
+ /* Tx Desscriptor needs 256 bytes alignment; */
+- TxPhyAddr = virt_to_bus(tpc->TxDescArrays);
++ TxPhyAddr = (u32)tpc->TxDescArrays;
+ diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8));
+ TxPhyAddr += diff;
+ tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff);
++#ifdef DEBUG_RTL8169
++ printf("tpc->TxDescArray: %08X\n", tpc->TxDescArray);
++#endif
+
+ tpc->RxDescArrays = rx_ring;
+ /* Rx Desscriptor needs 256 bytes alignment; */
+- RxPhyAddr = virt_to_bus(tpc->RxDescArrays);
++ RxPhyAddr = (u32)tpc->RxDescArrays;
+ diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8));
+ RxPhyAddr += diff;
+ tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff);
++#ifdef DEBUG_RTL8169
++ printf("tpc->RxDescArray: %08X\n", tpc->RxDescArray);
++#endif
+
+ if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) {
+ puts("Allocate RxDescArray or TxDescArray failed\n");
+- return;
++ return 0;
+ }
+
+ rtl8169_init_ring(dev);
+@@ -669,6 +698,7 @@
+ #ifdef DEBUG_RTL8169
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+ #endif
++ return 1;
+ }
+
+ /**************************************************************************
+@@ -733,7 +763,7 @@
+
+ /* Get MAC address. FIXME: read EEPROM */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+- dev->enetaddr[i] = RTL_R8(MAC0 + i);
++ bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i);
+
+ #ifdef DEBUG_RTL8169
+ printf("MAC Address");
+@@ -814,17 +844,14 @@
+ if (option & _1000bpsF) {
+ #ifdef DEBUG_RTL8169
+ printf("%s: 1000Mbps Full-duplex operation.\n",
+- dev->name);
++ dev->name);
+ #endif
+ } else {
+ #ifdef DEBUG_RTL8169
+- printf
+- ("%s: %sMbps %s-duplex operation.\n",
+- dev->name,
+- (option & _100bps) ? "100" :
+- "10",
+- (option & FullDup) ? "Full" :
+- "Half");
++ printf("%s: %sMbps %s-duplex operation.\n",
++ dev->name,
++ (option & _100bps) ? "100" : "10",
++ (option & FullDup) ? "Full" : "Half");
+ #endif
+ }
+ break;
+@@ -886,3 +913,5 @@
+ }
+
+ #endif
++
++/* vim: set ts=4: */
+Index: u-boot-1.2.0/include/configs/qnap.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ u-boot-1.2.0/include/configs/qnap.h 2007-04-07 21:56:55.376393000 +0200
+@@ -0,0 +1,363 @@
++/*
++ * Copyright (C) 2006 Andrew Luyten <u-boot@luyten.org.uk>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/* ------------------------------------------------------------------------- */
++
++/*
++ * board/config.h - configuration options, board specific
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/*
++ * High Level Configuration Options
++ * (easy to change)
++ */
++
++#define CONFIG_MPC824X 1
++#define CONFIG_MPC8245 1
++#define CONFIG_MPC8241 1
++
++#define CONFIG_IDENT_STRING " OpenTS(c)"
++#define CONFIG_TIMESTAMP
++#define CFG_HUSH_PARSER 1
++#define CFG_PROMPT_HUSH_PS2 "turbostation> "
++#define CONFIG_BOOTDELAY 3
++
++
++/*----------------------------------------------------------------------
++ * Define supported commands
++ */
++
++#define CONFIG_COMMANDS ( \
++ CONFIG_CMD_DFL | \
++ CFG_CMD_ELF | \
++ CFG_CMD_I2C | \
++ CFG_CMD_PING | \
++ CFG_CMD_DHCP | \
++ CFG_CMD_IDE | \
++ CFG_CMD_EXT2 | \
++ CFG_CMD_DATE | \
++ CFG_CMD_PCI )
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++
++/*-----------------------------------------------------------------------
++ * Miscellaneous configurable options
++ */
++
++#define CFG_LONGHELP 1 /* undef to save memory */
++#define CFG_PROMPT "=> " /* Monitor Command Prompt*/
++#define CFG_CBSIZE 256 /* Console I/O Buffer Size*/
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size*/
++#define CFG_MAXARGS 16 /* max number of command args*/
++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size*/
++#define CFG_LOAD_ADDR 0x00100000 /* default load address */
++#define CFG_HZ 1000 /* decrementer freq:1 ms ticks*/
++
++
++/*-----------------------------------------------------------------------
++ * PCI
++ *
++ */
++
++#define CONFIG_PCI
++#undef CONFIG_PCI_PNP
++
++#define PCI_ETH_IOADDR 0xbffe00
++#define PCI_ETH_MEMADDR 0xbfffce00
++
++#define PCI_IDE_IOADDR 0xbfffd0
++#define PCI_IDE_MEMADDR 0xbffffe00
++
++#define PCI_USB0_IOADDR 0
++#define PCI_USB0_MEMADDR 0xbfffe000
++#define PCI_USB1_IOADDR 0
++#define PCI_USB1_MEMADDR 0xbfffd000
++#define PCI_USB2_IOADDR 0
++#define PCI_USB2_MEMADDR 0xbfffcf00
++
++
++/*-----------------------------------------------------------------------
++ * Start addresses for the final memory configuration
++ * (Set up by the startup code)
++ */
++
++#define CFG_SDRAM_BASE 0x00000000
++#define CFG_MONITOR_BASE TEXT_BASE
++#undef CFG_RAMBOOT
++
++#define CFG_PCI_MEM_ADDR 0xB0000000
++#define CFG_EUMB_ADDR 0xFC000000
++#define CFG_FLASH_BASE 0xFF000000
++
++#define CFG_RESET_ADDRESS 0xFFF00100
++
++#define CFG_MONITOR_LEN (256 << 10)
++#define CFG_MALLOC_LEN (512 << 10)
++
++#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
++#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
++#define CFG_MAX_RAM_SIZE 0x10000000 /* up to 256M of SDRAM */
++
++
++/*-----------------------------------------------------------------------
++ * Definitions for initial stack pointer and data area
++ */
++
++#define CFG_INIT_RAM_ADDR 0x40000000
++#define CFG_INIT_RAM_END 0x1000
++#define CFG_GBL_DATA_SIZE 128
++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++
++/*-----------------------------------------------------------------------
++ * FLASH organization
++ */
++
++#define CFG_FLASH_CFI 1
++#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
++#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip*/
++#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
++#define CFG_FLASH_USE_BUFFER_WRITE /* faster writes */
++
++#define CFG_ENV_IS_IN_FLASH 1
++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00EA0000)
++#define CFG_ENV_SECT_SIZE 0x00020000 /* Total Size of Environment Sector*/
++
++
++/*-----------------------------------------------------------------------
++ * Gigabit Ethernet
++ */
++
++#define CONFIG_NET_MULTI
++#define CONFIG_RTL8169
++
++
++/*-----------------------------------------------------------------------
++ * Filesystems
++ */
++
++#define CONFIG_MAC_PARTITION
++#define CONFIG_DOS_PARTITION
++//#define CONFIG_ISO_PARTITION
++
++
++/*-----------------------------------------------------------------------
++ * IDE/ATA
++ */
++
++#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
++#undef CONFIG_IDE_LED /* no led for ide supported */
++#undef CONFIG_IDE_RESET /* no reset for ide supported */
++#undef CONFIG_ATAPI /* no ATAPI support */
++
++#define CONFIG_IDE_PREINIT /* To set up MMIO adresses */
++#define CONFIG_LBA48 /* Large disk support */
++
++#define CFG_IDE_MAXBUS 2 /* Two channels x 1 device each */
++#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1)
++
++#define CFG_ATA_BASE_ADDR 0x0000 /* Set up in board specific code */
++#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
++#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
++#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
++
++
++/*----------------------------------------------------------------------
++ * On Chip Serial configuration
++ */
++
++#define CONFIG_CONS_INDEX 1
++#define CONFIG_BAUDRATE 115200
++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
++
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++
++#define CFG_NS16550_REG_SIZE 1
++#define CFG_NS16550_CLK get_bus_freq(0)
++
++#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) /* Console port */
++#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) /* PIC ? */
++
++
++/*----------------------------------------------------------------------
++ * i2c support configuration
++ */
++
++#define CONFIG_HARD_I2C 1 /* To enable I2C support */
++#undef CONFIG_SOFT_I2C /* I2C bit-banged */
++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
++#define CFG_I2C_SLAVE 0x7F
++
++#define CONFIG_RTC_RS5C372A /* Real-time clock chip */
++
++
++/*----------------------------------------------------------------------
++ * Low Level Configuration Settings
++ * (address mappings, register initial values, etc.)
++ * You should know what you are doing if you make changes here.
++ */
++
++#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
++
++#define CFG_ROMNAL 7 /*rom/flash next access time */
++#define CFG_ROMFAL 11 /*rom/flash access time */
++
++#define CFG_REFINT 430 /* no of clock cycles between CBR refresh cycles */
++
++/* the following are for SDRAM only*/
++#define CFG_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
++#define CFG_REFREC 8 /* Refresh to activate interval */
++#define CFG_RDLAT 4 /* data latency from read command */
++#define CFG_PRETOACT 3 /* Precharge to activate interval */
++#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
++#define CFG_ACTORW 3 /* Activate to R/W */
++#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
++#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
++
++#define CFG_REGISTERD_TYPE_BUFFER 1
++#define CFG_EXTROM 1
++#define CFG_REGDIMM 0
++
++
++/*----------------------------------------------------------------------
++ * memory bank settings
++ *
++ * only bits 20-29 are actually used from these vales to set the
++ * start/end address the upper two bits will be 0, and the lower 20
++ * bits will be set to 0x00000 for a start address, or 0xfffff for an
++ * end address
++ */
++
++#define CFG_BANK0_START 0x00000000
++#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
++#define CFG_BANK0_ENABLE 1
++#define CFG_BANK1_START 0x3ff00000
++#define CFG_BANK1_END 0x3fffffff
++#define CFG_BANK1_ENABLE 0
++#define CFG_BANK2_START 0x3ff00000
++#define CFG_BANK2_END 0x3fffffff
++#define CFG_BANK2_ENABLE 0
++#define CFG_BANK3_START 0x3ff00000
++#define CFG_BANK3_END 0x3fffffff
++#define CFG_BANK3_ENABLE 0
++#define CFG_BANK4_START 0x00000000
++#define CFG_BANK4_END 0x00000000
++#define CFG_BANK4_ENABLE 0
++#define CFG_BANK5_START 0x00000000
++#define CFG_BANK5_END 0x00000000
++#define CFG_BANK5_ENABLE 0
++#define CFG_BANK6_START 0x00000000
++#define CFG_BANK6_END 0x00000000
++#define CFG_BANK6_ENABLE 0
++#define CFG_BANK7_START 0x00000000
++#define CFG_BANK7_END 0x00000000
++#define CFG_BANK7_ENABLE 0
++
++
++/*
++ * Memory bank enable bitmask, specifying which of the banks defined above
++ are actually present. MSB is for bank #7, LSB is for bank #0.
++ */
++#define CFG_BANK_ENABLE 0x01
++
++#define CFG_ODCR 0xff /* configures line driver impedances, */
++ /* see 8240 book for bit definitions */
++#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
++ /* currently accessed page in memory */
++ /* see 8240 book for details */
++#define CFG_DBUS_SIZE2 1
++#define CFG_BANK0_ROW 2
++
++
++/*----------------------------------------------------------------------
++ * Initial BAT mappings
++ */
++
++/* SDRAM 0 - 256MB */
++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* stack in DCACHE @ 1GB (no backing mem) */
++#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
++
++/* PCI memory */
++#define CFG_IBAT2L (CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
++#define CFG_IBAT2U (CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
++
++/* Flash, config addrs, etc */
++#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
++#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
++
++#define CFG_DBAT0L CFG_IBAT0L
++#define CFG_DBAT0U CFG_IBAT0U
++#define CFG_DBAT1L CFG_IBAT1L
++#define CFG_DBAT1U CFG_IBAT1U
++#define CFG_DBAT2L CFG_IBAT2L
++#define CFG_DBAT2U CFG_IBAT2U
++#define CFG_DBAT3L CFG_IBAT3L
++#define CFG_DBAT3U CFG_IBAT3U
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
++
++
++/*-----------------------------------------------------------------------
++ * Cache Configuration
++ */
++
++#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
++#endif
++
++
++/*-----------------------------------------------------------------------
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM 0x02 /* Software reboot */
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE 1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE 8192
++
++#define OF_CPU "PowerPC,603e"
++#define OF_STDOUT_PATH "/soc10x/serial@fc004500"
++
++#endif /* __CONFIG_H */
++
+--- u-boot-1.2.0.vanilla/Makefile 2007-01-07 00:13:11.000000000 +0100
++++ u-boot-1.2.0/Makefile 2007-02-26 01:55:37.000000000 +0100
+@@ -1296,6 +1296,9 @@
+ PN62_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
+
++qnap_config: unconfig
++ @$(MKCONFIG) $(@:_config=) ppc mpc824x qnap
++
+ Sandpoint8240_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+
diff --git a/packages/uboot/u-boot-LABEL.2006.06.30.2020/.mtn2git_empty b/packages/uboot/u-boot-LABEL.2006.06.30.2020/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/uboot/u-boot-LABEL.2006.06.30.2020/.mtn2git_empty
+++ /dev/null
diff --git a/packages/uboot/u-boot-LABEL.2006.06.30.2020/nohelloworld.patch b/packages/uboot/u-boot-LABEL.2006.06.30.2020/nohelloworld.patch
deleted file mode 100644
index d98cefe28e..0000000000
--- a/packages/uboot/u-boot-LABEL.2006.06.30.2020/nohelloworld.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: git/examples/Makefile
-===================================================================
---- git.orig/examples/Makefile 2006-10-20 09:53:20.000000000 +0200
-+++ git/examples/Makefile 2006-10-20 10:17:55.658554000 +0200
-@@ -59,9 +59,6 @@
-
- include $(TOPDIR)/config.mk
-
--SREC = hello_world.srec
--BIN = hello_world.bin hello_world
--
- ifeq ($(CPU),mpc8xx)
- SREC = test_burst.srec
- BIN = test_burst.bin test_burst
diff --git a/packages/uboot/u-boot-linkstationppc/.mtn2git_empty b/packages/uboot/u-boot-linkstationppc/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/uboot/u-boot-linkstationppc/.mtn2git_empty
+++ /dev/null
diff --git a/packages/uboot/u-boot-linkstationppc_git.bb b/packages/uboot/u-boot-linkstationppc_git.bb
deleted file mode 100644
index 7baac2ba7c..0000000000
--- a/packages/uboot/u-boot-linkstationppc_git.bb
+++ /dev/null
@@ -1,41 +0,0 @@
-DESCRIPTION = "U-boot bootloader"
-PROVIDES = "virtual/bootloader"
-SECTION = "bootloader"
-PRIORITY = "optional"
-LICENSE = "GPL"
-PR = "r1"
-
-DEFAULT_PREFERENCE = "-1"
-COMPATIBLE_MACHINE = "(lsppchd|lsppchg)"
-
-SRC_URI = "git://www.jdl.com/software/u-boot-86xx.git;protocol=git \
- file://u-boot-kurobox.patch;patch=1 \
- file://u-boot-kurobox-fdt.patch;patch=1 \
- file://defconfig_lsppchg \
- file://defconfig_lsppchd \
- "
-
-S = "${WORKDIR}/git"
-
-EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-do_compile () {
- unset LDFLAGS CFLAGS CPPFLAGS
- cp ${WORKDIR}/defconfig_${MACHINE} ${WORKDIR}/git/include/configs/linkstation.h
- oe_runmake ${UBOOT_MACHINE}_config
- oe_runmake ${UBOOT_MACHINE}
-}
-
-do_stage() {
- install -m 755 tools/mkimage ${STAGING_BINDIR_NATIVE}
-}
-
-do_deploy () {
- install -d ${DEPLOY_DIR_IMAGE}
- install ${S}/u-boot-h*.flash.bin ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}-${PV}-${PR}.bin
-}
-
-do_deploy[dirs] = "${S}"
-addtask deploy before do_build after do_compile
diff --git a/packages/uboot/u-boot_1.2.0.bb b/packages/uboot/u-boot_1.2.0.bb
index 5fbce73018..f1075bb00b 100644
--- a/packages/uboot/u-boot_1.2.0.bb
+++ b/packages/uboot/u-boot_1.2.0.bb
@@ -1,9 +1,25 @@
require u-boot.inc
-PR = "r1"
+PR = "r2"
SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-1.2.0.tar.bz2 \
"
SRC_URI_append_turbostation = "file://qnap.diff;patch=1"
+SRC_URI_append_lsppchg = "file://u-boot-kurobox.patch;patch=1 \
+ file://u-boot-kurobox-fdt.patch;patch=1 \
+ file://defconfig_lsppchg"
+
+SRC_URI_append_lsppchd = "file://u-boot-kurobox.patch;patch=1 \
+ file://u-boot-kurobox-fdt.patch;patch=1 \
+ file://defconfig_lsppchg"
+
+do_compile_prepend_lsppchg () {
+ cp ${WORKDIR}/defconfig_lsppchg ${S}/include/configs/linkstation.h
+}
+
+do_compile_prepend_lsppchd () {
+ cp ${WORKDIR}/defconfig_lsppchd ${S}/include/configs/linkstation.h
+}
+
PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/packages/uboot/u-boot_LABEL.2006.06.30.2020.bb b/packages/uboot/u-boot_LABEL.2006.06.30.2020.bb
deleted file mode 100644
index de0373782b..0000000000
--- a/packages/uboot/u-boot_LABEL.2006.06.30.2020.bb
+++ /dev/null
@@ -1,18 +0,0 @@
-require u-boot.inc
-
-PR = "r2"
-DEFAULT_PREFERENCE = "-1"
-
-TAG = "${@bb.data.getVar('PV',d,1).replace('.', '_')}"
-
-SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git;tag=${TAG} \
- file://nohelloworld.patch;patch=1"
-# file://config.patch;patch=1"
-
-SRC_URI_append_navman-icn330 = " http://www.duff.dk/navman/navman-u-boot-2006-30-2020.patch;patch=1"
-
-S = "${WORKDIR}/git"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-#inherit base
diff --git a/packages/uboot/uboot-utils_1.1.2.bb b/packages/uboot/uboot-utils_1.2.0.bb
index 8a5d7dce3c..8a5d7dce3c 100644
--- a/packages/uboot/uboot-utils_1.1.2.bb
+++ b/packages/uboot/uboot-utils_1.2.0.bb