merge of '397294e12f174d25745f5b3b591468ffd54fec4d'

     and 'e8e5e906fda8d6117edc8f3082056c7d690921a7'

12 files changed, 19357 insertions, 3 deletions

diff --git a/conf/machine/bd-neon.conf b/conf/machine/bd-neon.conf
new file mode 100644
index 0000000000..63e3ac8269
--- /dev/null
+++ b/conf/machine/bd-neon.conf
@@ -0,0 +1,56 @@
+#@TYPE: Machine
+#@NAME: Boundary Devices NEON
+#@DESCRIPTION: Machine configuration for the Boundary Devices NEON board
+
+#
+# Hardware-based properties
+#
+TARGET_ARCH = "arm"
+PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te"
+
+# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
+require conf/machine/include/tune-xscale.conf
+
+# Uncomment this to use iwmmxt optimizations. Remove the above xscale stuff first
+#require conf/machine/include/tune-iwmmxt.conf
+
+ROOT_FLASH_SIZE = "60"
+VOLATILE_STORAGE_SIZE = "128"
+GUI_MACHINE_CLASS = "bigscreen"
+MACHINE_FEATURES = "kernel26 touchscreen apm alsa usbgadget screen uboot"
+
+#
+# Software/packages selection
+#
+PREFERRED_PROVIDER_virtual/kernel = "linux-bd-neon-2.6"
+MODUTILS = "26"	
+XSERVER = "xserver-kdrive-fbdev"
+MACHINE_TASK_PROVIDER = "task-base"
+
+PREFERRED_VERSION_u-boot = "1.1.2"
+
+EXTRA_IMAGEDEPENDS =" mtd-utils"
+
+MACHINE_EXTRA_RDEPENDS = " mtd-utils"
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-module-nls-cp437 \
+				kernel-module-nls-iso8859-1 \
+				kernel-module-nls-utf8 \
+				kernel-module-af-key \
+				kernel-module-i2c-pxa"
+
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 -n"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x40000 --pad=32243712; sumtool -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
+			  -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs-summary.jffs2 \
+			  -e 128KiB -p"
+
+#
+# Modules autoload and other boot properties
+#
+module_autoload_evdev = "evdev"
+module_autoload_mmc_block = "mmc_block"
+module_autoload_snd-pcm-oss = "snd-pcm-oss"
+module_autoload_snd-mixer-oss = "snd-mixer-oss"
+
+#module_autoload_g_ether = "g_ether"
+
+SERIAL_CONSOLE = "115200 ttyS0"
diff --git a/packages/gpephone/gpe-session-scripts-phone/phonesession b/packages/gpephone/gpe-session-scripts-phone/phonesession
index 2f573a13fa..524199ee16 100755
--- a/packages/gpephone/gpe-session-scripts-phone/phonesession
+++ b/packages/gpephone/gpe-session-scripts-phone/phonesession
@@ -54,6 +54,7 @@ esdplay /mnt/sd/sounds/startup.wav
 
 # Start SoundServer
 soundserver &
+alsactl restore -f /etc/gsmhandset.state
 
 # Run GSM support stuff
 
diff --git a/packages/gpephone/gpe-session-scripts-phone_0.67.bb b/packages/gpephone/gpe-session-scripts-phone_0.67.bb
index ac867a9c02..62bd5a649b 100644
--- a/packages/gpephone/gpe-session-scripts-phone_0.67.bb
+++ b/packages/gpephone/gpe-session-scripts-phone_0.67.bb
@@ -14,7 +14,7 @@ SRC_URI = "${GPE_MIRROR}/gpe-session-scripts-${PV}.tar.gz \
 	   file://disable-composite.xsettings \
            file://standard-apps.patch;patch=1"
 
-PR = "r9"
+PR = "r10"
 
 S = "${WORKDIR}/gpe-session-scripts-${PV}"
 
diff --git a/packages/linux/linux-bd-neon-2.6-2.6.22/.mtn2git_empty b/packages/linux/linux-bd-neon-2.6-2.6.22/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/linux/linux-bd-neon-2.6-2.6.22/.mtn2git_empty
diff --git a/packages/linux/linux-bd-neon-2.6-2.6.22/neon-jffs2-config.patch b/packages/linux/linux-bd-neon-2.6-2.6.22/neon-jffs2-config.patch
new file mode 100644
index 0000000000..958eda0200
--- /dev/null
+++ b/packages/linux/linux-bd-neon-2.6-2.6.22/neon-jffs2-config.patch
@@ -0,0 +1,33 @@
+--- linux-2.6.22/arch/arm/configs/neon_defconfig-o	2007-08-23 19:49:52.000000000 +0200
++++ linux-2.6.22/arch/arm/configs/neon_defconfig	2007-08-23 19:50:16.000000000 +0200
+@@ -171,7 +171,8 @@
+ # CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
+ CONFIG_HZ=100
+-# CONFIG_AEABI is not set
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
+ # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ CONFIG_FLATMEM_MANUAL=y
+@@ -1131,7 +1132,7 @@
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_SYSCTL=y
+ CONFIG_SYSFS=y
+-# CONFIG_TMPFS is not set
++CONFIG_TMPFS=y
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+@@ -1147,7 +1148,10 @@
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+ # CONFIG_JFFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++CONFIG_JFFS2_SUMMARY=y
+ CONFIG_CRAMFS=y
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_HPFS_FS is not set
diff --git a/packages/linux/linux-bd-neon-2.6_2.6.22.bb b/packages/linux/linux-bd-neon-2.6_2.6.22.bb
new file mode 100644
index 0000000000..6d2472935f
--- /dev/null
+++ b/packages/linux/linux-bd-neon-2.6_2.6.22.bb
@@ -0,0 +1,48 @@
+DESCRIPTION = "2.6 Linux Kernel for Boundary Devices NEON Board"
+SECTION = "kernel"
+HOMEPAGE = "N/A"
+LICENSE = "GPL"
+DEPENDS += "uboot-utils"
+
+PR = "r1"
+
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.22.tar.bz2 \
+           http://www.boundarydevices.com/boundary-2.6.22-2007-07-22.patch.bz2;patch=1 \
+           file://neon-jffs2-config.patch;patch=1"
+
+S = "${WORKDIR}/linux-2.6.22"
+
+inherit kernel
+
+KERNEL_IMAGETYPE = "zImage"
+FILES_kernel-image = ""
+ALLOW_EMPTY = "1"
+
+do_configure() {
+        cp arch/arm/configs/neon_defconfig .config || die "No default configuration for ${MACHINE} available."
+
+#        if [ "${TARGET_OS}" == "linux-gnueabi" -o  "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then
+#                echo "CONFIG_AEABI=y"                   >> ${S}/.config
+#                echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+#        else
+#                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+#                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+#        fi
+
+        yes '' | oe_runmake oldconfig
+}
+
+do_deploy() {
+        install -d ${DEPLOY_DIR_IMAGE}
+        install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}.bin
+        tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz -C ${D} lib
+        ${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin
+        rm -f linux.bin.gz
+        gzip -9 linux.bin
+        ${STAGING_BINDIR_NATIVE}/mkimage -A arm -O linux -T kernel -C gzip -a a0008000 -e a0008000 -n "Boundary Devices NEON" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}.bin
+        rm -f linux.bin.gz
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask deploy before do_package after do_install
diff --git a/packages/tslib/tslib-1.0/bd-neon/.mtn2git_empty b/packages/tslib/tslib-1.0/bd-neon/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/tslib/tslib-1.0/bd-neon/.mtn2git_empty
diff --git a/packages/tslib/tslib-1.0/bd-neon/ts.conf b/packages/tslib/tslib-1.0/bd-neon/ts.conf
new file mode 100644
index 0000000000..15fe294ce6
--- /dev/null
+++ b/packages/tslib/tslib-1.0/bd-neon/ts.conf
@@ -0,0 +1,5 @@
+module_raw ucb1x00
+module pthres pmin=1
+module variance delta=500
+module dejitter delta=10000
+module linear
diff --git a/packages/tslib/tslib-1.0/bd-neon/tslib.sh b/packages/tslib/tslib-1.0/bd-neon/tslib.sh
new file mode 100644
index 0000000000..b5f1c906f3
--- /dev/null
+++ b/packages/tslib/tslib-1.0/bd-neon/tslib.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+TSLIB_TSDEVICE=/dev/touch_ucb1x00
+
+export TSLIB_TSDEVICE
+
diff --git a/packages/tslib/tslib_1.0.bb b/packages/tslib/tslib_1.0.bb
index 51bd1f6a7b..598e60fe4d 100644
--- a/packages/tslib/tslib_1.0.bb
+++ b/packages/tslib/tslib_1.0.bb
@@ -4,7 +4,7 @@ AUTHOR = "Russell King w/ plugins by Chris Larson et. al."
 SECTION = "base"
 LICENSE = "LGPL"
 
-PR = "r16"
+PR = "r17"
 
 SRC_URI = "http://download.berlios.de/tslib/tslib-1.0.tar.bz2 \
            file://tslib-input_raw-grab_events.patch;patch=1 \
diff --git a/packages/uboot/u-boot-1.1.2/u-boot-1.1.2-neon.patch b/packages/uboot/u-boot-1.1.2/u-boot-1.1.2-neon.patch
new file mode 100644
index 0000000000..ed959d43d8
--- /dev/null
+++ b/packages/uboot/u-boot-1.1.2/u-boot-1.1.2-neon.patch
@@ -0,0 +1,19204 @@
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/bd2003.c u-boot-1.1.2-neon/board/bd2003/bd2003.c
+--- u-boot-1.1.2/board/bd2003/bd2003.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/bd2003.c	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,94 @@
++/*
++ * (C) Copyright 2002
++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger@sysgo.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <config.h>
++#include <common.h>
++#include <version.h>
++#include <stdarg.h>
++#include <linux/types.h>
++#include <devices.h>
++#include <lcd.h>
++#include <lcd_panels.h>
++
++/* ------------------------------------------------------------------------- */
++/*
++ * LCD panel declarations
++ */
++
++vidinfo_t panel_info = {
++	vl_col:		1024,		//this is corrected in SetPanelInfo
++	vl_row:		768,
++	vl_bpix:    LCD_BPP,
++	vl_lcd_line_length: (320 * NBITS(LCD_BPP) ) >> 3
++};
++
++void disable_lcd_panel( void )
++{
++}
++
++
++/* ------------------------------------------------------------------------- */
++
++
++/*
++ * Miscelaneous platform dependent initialisations
++ */
++
++int board_init (void)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++
++	/* memory and cpu-speed are setup before relocation */
++	/* so we do _nothing_ here */
++
++	/* arch number of Neon Board */
++	gd->bd->bi_arch_number = MACH_TYPE_BD2003 ;
++
++	/* adress of boot parameters */
++	gd->bd->bi_boot_params = 0xa0000100;
++
++	return 0;
++}
++
++int board_late_init(void)
++{
++	setenv("stdout", "serial");
++	setenv("stderr", "serial");
++	return 0;
++}
++
++
++int dram_init (void)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++
++	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++
++	return 0;
++}
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/config.mk u-boot-1.1.2-neon/board/bd2003/config.mk
+--- u-boot-1.1.2/board/bd2003/config.mk	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/config.mk	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,4 @@
++#TEXT_BASE = 0xa1700000
++TEXT_BASE = 0xA1F00000
++#TEXT_BASE = 0
++PXALCD = 1
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/.cvsignore u-boot-1.1.2-neon/board/bd2003/.cvsignore
+--- u-boot-1.1.2/board/bd2003/.cvsignore	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/.cvsignore	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,2 @@
++.depend
++
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/flash.c u-boot-1.1.2-neon/board/bd2003/flash.c
+--- u-boot-1.1.2/board/bd2003/flash.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/flash.c	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,477 @@
++/*
++ * (C) Copyright 2001
++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
++ *
++ * (C) Copyright 2001
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <linux/byteorder/swab.h>
++#include <asm/arch/pxa250Base.h>
++#include <asm/arch/pxaHardware.h>
++#include "lcd.h"
++
++flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
++
++/* Board support for 1 or 2 flash devices */
++#define FLASH_PORT_WIDTH32
++#undef FLASH_PORT_WIDTH16
++
++#ifdef FLASH_PORT_WIDTH16
++#define FLASH_PORT_WIDTH		ushort
++#define FLASH_PORT_WIDTHV		vu_short
++#define SWAP(x)               __swab16(x)
++#else
++#define FLASH_PORT_WIDTH		ulong
++#define FLASH_PORT_WIDTHV		vu_long
++#define SWAP(x)               __swab32(x)
++#endif
++
++#define FPW	   FLASH_PORT_WIDTH
++#define FPWV   FLASH_PORT_WIDTHV
++
++#define mb() __asm__ __volatile__ ("" : : : "memory")
++
++/*-----------------------------------------------------------------------
++ * Functions
++ */
++static ulong flash_get_size (FPW *addr, flash_info_t *info);
++static int write_data (flash_info_t *info, ulong dest, FPW data);
++static void flash_get_offsets (ulong base, flash_info_t *info);
++void inline spin_wheel_init(ulong addr, ulong cnt);
++void inline spin_wheel_done( int worked );
++void inline spin_wheel (ulong numleft);
++
++/*-----------------------------------------------------------------------
++ */
++ulong bases[] = {PHYS_FLASH_1,PHYS_FLASH_2,1};
++unsigned long flash_init (void)
++{
++	int i=0;
++	int j=0;
++	ulong size = 0;
++	ulong base;
++
++   while (i < CFG_MAX_FLASH_BANKS) {
++		base = bases[j++];
++		flash_info[i].start[0] = 0;
++		if (base & 1) break;
++		if (flash_get_size ((FPW *) base, &flash_info[i])) {
++			flash_get_offsets (base, &flash_info[i]);
++			size += flash_info[i].size;
++			i++;
++		}
++      else {
++printf( "error reading flash size\n" );
++      }
++	}
++	if (size>0) {
++		base = flash_info[0].start[0];
++		// Protect monitor and environment sectors
++		flash_protect ( FLAG_PROTECT_SET,
++			base,
++			base + monitor_flash_len - 1,
++			&flash_info[0] );
++
++		flash_protect ( FLAG_PROTECT_SET,
++			base+CFG_ENV_OFFSET,
++			base+CFG_ENV_OFFSET + CFG_ENV_SIZE - 1, &flash_info[0] );
++	}
++
++	return size;
++}
++
++/*-----------------------------------------------------------------------
++ */
++static void flash_get_offsets (ulong base, flash_info_t *info)
++{
++	int i;
++
++	if (info->flash_id == FLASH_UNKNOWN) {
++		return;
++	}
++
++	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
++		for (i = 0; i < info->sector_count; i++) {
++			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
++			info->protect[i] = 0;
++		}
++	}
++}
++
++/*-----------------------------------------------------------------------
++ */
++void flash_print_info (flash_info_t *info)
++{
++	int i;
++
++	if (info->flash_id == FLASH_UNKNOWN) {
++		printf ("missing or unknown FLASH type\n");
++		return;
++	}
++
++	switch (info->flash_id & FLASH_VENDMASK) {
++	case FLASH_MAN_INTEL:
++		printf ("INTEL ");
++		break;
++	default:
++		printf ("Unknown Vendor ");
++		break;
++	}
++
++	switch (info->flash_id & FLASH_TYPEMASK) {
++	case FLASH_28F128J3A:
++		printf ("28F128J3A\n");
++		break;
++	default:
++		printf ("Unknown Chip Type\n");
++		break;
++	}
++
++	printf ("  Size: %ld MB in %d Sectors\n",
++			info->size >> 20, info->sector_count);
++
++	printf ("  Sector Start Addresses:");
++	for (i = 0; i < info->sector_count; ++i) {
++		if ((i % 5) == 0)
++			printf ("\n   ");
++		printf (" %08lX%s",
++			info->start[i],
++			info->protect[i] ? " (RO)" : "     ");
++	}
++	printf ("\n");
++	return;
++}
++
++/*
++ * The following code cannot be run from FLASH!
++ */
++static ulong flash_get_size (FPW *addr, flash_info_t *info)
++{
++	volatile FPW value;
++	volatile unsigned long *mc = (unsigned long *)MEMORY_CONTROL_BASE;
++	unsigned long val = 1<<3;
++
++   info->flash_id = FLASH_UNKNOWN;
++	info->sector_count = 0;
++	info->size = 0;
++
++	if (((ulong)addr) > 0x14000000) return 0;
++	val = mc[(MSC0>>2) +(((ulong)addr)>>27)];
++	if (((ulong)addr) & 0x04000000) val = val>>16;
++	if ( val & (1<<3)) return 0;	//if 16 bit bus then return
++	
++	/* Write auto select command: read Manufacturer ID */
++	addr[0x5555] = (FPW) 0x00AA00AA;
++	addr[0x2AAA] = (FPW) 0x00550055;
++	addr[0x5555] = (FPW) 0x00900090;
++
++	mb ();
++	value = addr[0];
++
++	switch (value) {
++
++	case (FPW) 0:
++	case (FPW) INTEL_MANUFACT & 0xFF0000 :
++	case (FPW) INTEL_MANUFACT & 0x0000FF :
++	case (FPW) INTEL_MANUFACT:
++		info->flash_id = FLASH_MAN_INTEL;
++		break;
++
++	default:
++printf( "Invalid flash manufacturer %x\n", value );
++		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
++		return (0);			/* no or unknown flash  */
++	}
++
++	mb ();
++	value = addr[1];			/* device ID        */
++
++	switch (value) {
++
++	case (FPW) 0:
++	case (FPW) INTEL_ID_28F128J3A & 0xFF0000 :
++	case (FPW) INTEL_ID_28F128J3A & 0x0000FF :
++	case (FPW) INTEL_ID_28F128J3A:
++		info->flash_id += FLASH_28F128J3A;
++		info->sector_count = 128;
++		info->size = 0x02000000;
++		break;				/* => 16 MB     */
++
++	default:
++printf( "Unknown flash device %x\n", value );
++		info->flash_id = FLASH_UNKNOWN;
++		break;
++	}
++
++	if (info->sector_count > CFG_MAX_FLASH_SECT) {
++		printf ("** ERROR: sector count %d > max (%d) **\n",
++			info->sector_count, CFG_MAX_FLASH_SECT);
++		info->sector_count = CFG_MAX_FLASH_SECT;
++	}
++
++	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
++
++	return (info->size);
++}
++
++
++/*-----------------------------------------------------------------------
++ */
++
++int flash_erase (flash_info_t *info, int s_first, int s_last)
++{
++	int flag, prot, sect;
++	ulong type, start, last;
++	int rcode = 0;
++
++	if ((s_first < 0) || (s_first > s_last)) {
++		if (info->flash_id == FLASH_UNKNOWN) {
++			printf ("- missing\n");
++		} else {
++			printf ("- no sectors to erase\n");
++		}
++		return 1;
++	}
++
++	type = (info->flash_id & FLASH_VENDMASK);
++	if ((type != FLASH_MAN_INTEL)) {
++		printf ("Can't erase unknown flash type %08lx - aborted\n",
++			info->flash_id);
++		return 1;
++	}
++
++	prot = 0;
++	for (sect = s_first; sect <= s_last; ++sect) {
++		if (info->protect[sect]) {
++			prot++;
++		}
++	}
++
++	if (prot) {
++		printf ("- Warning: %d protected sectors will not be erased!\n",
++			prot);
++	} else {
++		printf ("\n");
++	}
++
++	start = get_timer (0);
++	last = start;
++
++	/* Disable interrupts which might cause a timeout here */
++	flag = disable_interrupts ();
++
++	/* Start erase on unprotected sectors */
++	for (sect = s_first; sect <= s_last; sect++) {
++		if (info->protect[sect] == 0) {	/* not protected */
++         char temp[80];
++			FPWV *addr = (FPWV *) (info->start[sect]);
++			FPW status;
++
++			sprintf (temp, "Erasing sector %2d ... \r", sect);
++         lcd_puts( temp );
++
++			/* arm simple, non interrupt dependent timer */
++			reset_timer_masked ();
++
++			*addr = (FPW) 0x00500050;	/* clear status register */
++			*addr = (FPW) 0x00200020;	/* erase setup */
++			*addr = (FPW) 0x00D000D0;	/* erase confirm */
++
++			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
++				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
++					printf ("Timeout\n");
++					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
++					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
++					rcode = 1;
++					break;
++				}
++			}
++
++			*addr = 0x00500050;	/* clear status register cmd.   */
++			*addr = 0x00FF00FF;	/* resest to read mode          */
++		}
++	}
++   lcd_puts( "\r\n" );
++	return rcode;
++}
++
++/*-----------------------------------------------------------------------
++ * Copy memory to flash, returns:
++ * 0 - OK
++ * 1 - write timeout
++ * 2 - Flash not erased
++ * 4 - Flash not identified
++ */
++
++int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
++{
++	ulong cp, wp;
++	FPW data;
++	int count, i, l, rc, port_width;
++
++   rc = 0 ;
++	if (info->flash_id == FLASH_UNKNOWN) {
++		return 4;
++	}
++/* get lower word aligned address */
++#ifdef FLASH_PORT_WIDTH16
++	wp = (addr & ~1);
++	port_width = 2;
++#else
++	wp = (addr & ~3);
++	port_width = 4;
++#endif
++
++   spin_wheel_init(addr,cnt);
++
++	/*
++	 * handle unaligned start bytes
++	 */
++	if ((l = addr - wp) != 0) {
++		data = 0;
++		for (i = 0, cp = wp; i < l; ++i, ++cp) {
++			data = (data << 8) | (*(uchar *) cp);
++		}
++		for (; i < port_width && cnt > 0; ++i) {
++			data = (data << 8) | *src++;
++			--cnt;
++			++cp;
++		}
++		for (; cnt == 0 && i < port_width; ++i, ++cp) {
++			data = (data << 8) | (*(uchar *) cp);
++		}
++
++		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
++         goto out;
++		}
++		wp += port_width;
++	}
++
++	/*
++	 * handle word aligned part
++	 */
++	count = 0;
++	while (cnt >= port_width) {
++		data = 0;
++		for (i = 0; i < port_width; ++i) {
++			data = (data << 8) | *src++;
++		}
++		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
++         goto out;
++		}
++		wp += port_width;
++		cnt -= port_width;
++		if (count++ > 0x800) {
++			spin_wheel (cnt);
++			count = 0;
++		}
++	}
++
++	if (cnt) {
++   	/*
++   	 * handle unaligned tail bytes
++   	 */
++   	data = 0;
++   	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
++   		data = (data << 8) | *src++;
++   		--cnt;
++   	}
++   	for (; i < port_width; ++i, ++cp) {
++   		data = (data << 8) | (*(uchar *) cp);
++   	}
++   
++   	rc = write_data (info, wp, SWAP (data));
++	}
++
++out:
++   spin_wheel_done(0 == rc);
++   return rc ;
++}
++
++/*-----------------------------------------------------------------------
++ * Write a word or halfword to Flash, returns:
++ * 0 - OK
++ * 1 - write timeout
++ * 2 - Flash not erased
++ */
++static int write_data (flash_info_t *info, ulong dest, FPW data)
++{
++	FPWV *addr = (FPWV *) dest;
++   FPW old = *addr ;
++	ulong status;
++	int flag;
++
++	/* Check if Flash is (sufficiently) erased */
++	if ((old & data) != data) {
++		printf ("not erased at %08lx (%lx)\n", (ulong) addr, old);
++		return (2);
++	}
++
++   if( old != data )
++   {
++   	/* Disable interrupts which might cause a timeout here */
++   	flag = disable_interrupts ();
++
++   	*addr = (FPW) 0x00400040;	/* write setup */
++   	*addr = data;
++   
++   	/* arm simple, non interrupt dependent timer */
++   	reset_timer_masked ();
++   
++   	/* wait while polling the status register */
++   	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
++   		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
++   			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
++   			return (1);
++   		}
++   	}
++   	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
++   } /* need to program? */
++
++
++	return (0);
++}
++
++void inline spin_wheel_init(ulong addr, ulong cnt)
++{
++   char temp[80];
++   sprintf( temp, 
++            "\nprogramming flash\n"
++            "%08lx->%08lx\n"
++            " ", addr, cnt );
++   lcd_puts( temp );
++}
++
++void inline spin_wheel_done( int worked )
++{
++   if( worked )
++      spin_wheel(0);
++   lcd_puts( worked ? "\ncompleted.\n" : "\nfailed!\n" );
++}
++
++void inline spin_wheel( ulong numleft )
++{
++   char temp[40];
++   sprintf( temp, "\r          %08lx", numleft );
++   lcd_puts( temp );
++}
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/init.script u-boot-1.1.2-neon/board/bd2003/init.script
+--- u-boot-1.1.2/board/bd2003/init.script	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/init.script	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,42 @@
++if fatload mmc 0 a0000000 logo.bmp ; then
++   bmp info a0000000 ;
++   bmp display a0000000 ;
++else
++   lecho "No logo present" ;
++fi
++
++if fatload mmc 0 a2000000 uimage ; then
++   lecho 'load Linux'
++   if fatload mmc 0 a2200000 mmcinitrd.u-boot ; then
++      echo 'using initrd' ;
++      lecho "Booting Linux"
++      set bootargs root=/dev/ram0 console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1)
++      bootm a2000000 a2200000
++   else
++      echo 'testing cramfs img' ;
++      if fatload mmc 0 a2200000 cramfs.img ; then
++         if cmp.b 00140000 a2200000 $filesize ; then
++            echo 'cramfs images match' ;
++         else
++            lecho 'filesystems differ...' ;
++            protect off all ;
++            erase 00140000 01ffffff ;
++            cp.b a2200000 00140000 $filesize ;
++         fi
++
++         set bootargs console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs
++         lecho "Booting Linux"
++         bootm a2000000
++      fi
++   fi
++else
++   echo "No Linux kernel" ;
++fi
++
++lecho 'No Linux, try CE'
++
++if fatload mmc 0 A0030000 nk.nb0 ; then
++   g A0030000 ;
++else
++   echo "No WinCE image" ;
++fi
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/Makefile u-boot-1.1.2-neon/board/bd2003/Makefile
+--- u-boot-1.1.2/board/bd2003/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/Makefile	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,48 @@
++
++#
++# (C) Copyright 2000
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= lib$(BOARD).a
++
++OBJS	:= bd2003.o flash.o
++SOBJS	:= memsetup.o
++
++$(LIB):	$(OBJS) $(SOBJS)
++	$(AR) crv $@ $(OBJS) $(SOBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+diff -u -r --new-file u-boot-1.1.2/board/bd2003/memsetup.S u-boot-1.1.2-neon/board/bd2003/memsetup.S
+--- u-boot-1.1.2/board/bd2003/memsetup.S	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.2-neon/board/bd2003/memsetup.S	2007-08-11 21:07:19.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++ * Most of this taken from Redboot hal_platform_setup.h with cleanup
++ *
++ * NOTE: I haven't clean this up considerably, just enough to get it
++ * running. See hal_platform_setup.h for the source. See
++ * board/cradle/memsetup.S for another PXA250 setup that is
++ * much cleaner.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <version.h>
++
++#define BAUDRATE 115200
++#include <asm/arch/platformTypes.h>
++#include <configs/select.h>
++#include <asm/arch/pxaGpio.h>
++#include <asm/arch/pxaMacro3.h>
++
++DRAM_SIZE:  .long   CFG_DRAM_SIZE
++
++/* wait for coprocessor write complete */
++   .macro CPWAIT reg
++   mrc  p15,0,\reg,c2,c0,0
++   mov  \reg,\reg
++   sub  pc,pc,#4
++   .endm
++
++
++/*
++ * 	Memory setup
++ */
++
++.globl memsetup
++memsetup:
++
++    mov      r10, lr
++
++    InitCS0_CS1	r0,sp
++    InitGPIO	r0,sp
++    InitIC_Clocks	r0,sp
++    InitUART	r0,sp,UART_BASE,BAUDRATE
++    InitUART	r0,sp,UART_BASE+0x600000,9600
++    InitChangeCPUSpeed r0
++    InitMemory	r0,sp,r1
++