unslung-kernel, unslung-image: Now that 6.8-beta is released, moved mainline to R63 and dropped R29 (people can get it from SVN if they want to build old versions)

34 files changed, 467 insertions, 1946 deletions

diff --git a/packages/linux/unslung-kernel/ext3flash-on-disk1.patch b/packages/linux/unslung-kernel/ext3flash-on-disk1.patch
deleted file mode 100644
index 80170f08ce..0000000000
--- a/packages/linux/unslung-kernel/ext3flash-on-disk1.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- linux-2.4.22/drivers/scsi/scsi_scan.c.orig	2004-11-06 14:01:22.000000000 +1030
-+++ linux-2.4.22/drivers/scsi/scsi_scan.c	2004-11-06 15:00:33.000000000 +1030
-@@ -704,6 +704,7 @@
-         /* restrict device on certain port grant */
- 	SDpnt->host->hostt->removable = SDpnt->removable;
- 
-+#if 0
-         if ( SDpnt->removable && (USB_DEVPATH_1 == SDpnt->host->hostt->port) )
-         {
- 		create_proc_read_entry("usb_err",
-@@ -718,8 +719,9 @@
- 		shpnt->porttype = 1;
- 		return 0;
-         }
-+#endif
- 		// add by super
--        if (SDpnt->removable){
-+        if (SDpnt->removable && (USB_DEVPATH_2 == SDpnt->host->hostt->port)){
- 		printk("is removable disk \n");
- 		*IXP425_GPIO_GPOUTR &= 0xfffb;
- 		create_proc_read_entry("usb_conn",
---- linux-2.4.22/drivers/usb/storage/usb.c.orig	2004-11-06 14:01:06.000000000 +1030
-+++ linux-2.4.22/drivers/usb/storage/usb.c	2004-11-06 15:01:23.000000000 +1030
-@@ -787,6 +787,7 @@
- 		ss->htmplt.removable = 1;
- 	}
- #endif
-+#if 0
-                 /* restrict device on certain port */
-         if ( ss->htmplt.removable && (USB_DEVPATH_1 ==  dev->devpath[0]))
-                 if ( ss->htmplt.removable ^ (USB_DEVPATH_2 == dev->devpath[0]) )
-@@ -803,7 +804,8 @@
- 			free_us_data( pre_ss, ss );
- 			return NULL;
-                 }
--                if (ss->htmplt.removable){
-+#endif
-+                if (ss->htmplt.removable && (USB_DEVPATH_2 == dev->devpath[0])){
- 			printk("is removable disk \n");
- 			*IXP425_GPIO_GPOUTR &= 0xfffb;
- 			create_proc_read_entry("usb_conn",
diff --git a/packages/linux/unslung-kernel/ext3flash.patch b/packages/linux/unslung-kernel/ext3flash.patch
deleted file mode 100644
index b61346c62b..0000000000
--- a/packages/linux/unslung-kernel/ext3flash.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- linux-2.4.22/drivers/scsi/scsi_scan.c.orig	2004-09-23 22:26:35.000000000 +0930
-+++ linux-2.4.22/drivers/scsi/scsi_scan.c	2004-09-23 22:38:30.000000000 +0930
-@@ -704,6 +704,7 @@
-         /* restrict device on certain port grant */
- 	SDpnt->host->hostt->removable = SDpnt->removable;
- 
-+#if 0
-         if ( SDpnt->removable && (USB_DEVPATH_1 == SDpnt->host->hostt->port) )
-         {
- 		create_proc_read_entry("usb_err",
-@@ -729,6 +730,7 @@
- 				NULL
- 			);
- 	}else {
-+#endif
- 		printk("%x port connect!!!!!\n",SDpnt->host->hostt->port);
- 		if(0x31 == SDpnt->host->hostt->port){
- 			*IXP425_GPIO_GPOUTR &= 0xfff7;
-@@ -747,7 +749,9 @@
- 					NULL
- 			);
- 		}
-+#if 0
- 	}
-+#endif
- 		//end
- 	/*
- 	 * Check the peripheral qualifier field - this tells us whether LUNS
diff --git a/packages/linux/unslung-kernel/limit1gb.patch b/packages/linux/unslung-kernel/limit1gb.patch
deleted file mode 100644
index 17f78ef785..0000000000
--- a/packages/linux/unslung-kernel/limit1gb.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.4.22/drivers/scsi/scsi_scan.c.orig	2004-09-23 22:26:35.000000000 +0930
-+++ linux-2.4.22/drivers/scsi/scsi_scan.c	2004-09-23 22:42:09.000000000 +0930
-@@ -694,7 +694,7 @@
- 					       (buffer[2] << 8) |
- 					       buffer[3]);
- 		printk("The capacity is %d\n",capacity);
--		if(capacity<20000000){
-+		if(capacity<2000000){
- 			SDpnt->removable = 1;
- 		}
- 		kfree(buffer);
diff --git a/packages/linux/unslung-kernel_2.4.22.l2.3r29.bb b/packages/linux/unslung-kernel_2.4.22.l2.3r29.bb
deleted file mode 100644
index cda40e1c0b..0000000000
--- a/packages/linux/unslung-kernel_2.4.22.l2.3r29.bb
+++ /dev/null
@@ -1,35 +0,0 @@
-SECTION = "kernel"
-
-include nslu2-linksys-kernel_2.4.22.bb
-
-DESCRIPTION = "Unslung kernel for the Linksys NSLU2 device"
-MAINTAINER = "NSLU2 Linux <www.nlsu2-linux.org>"
-PR = "r5"
-
-KERNEL_SUFFIX = "unslung"
-
-CMDLINE_ROOT = "root=/dev/mtdblock4 rootfstype=jffs2 rw init=/linuxrc mem=32M@0x00000000"
-
-UNSLUNG_KERNEL_EXTRA_SRC_URI ?=
-
-SRC_URI += "file://limit1gb.patch;patch=1 \
-	    file://gl811e.patch;patch=1 \
-	    file://ext3flash-on-disk1.patch;patch=1 \
-	    file://usbnet.patch;patch=1 \
-	    file://missing-usb-ioctls.patch;patch=1 \
-	    file://anonymiser.patch;patch=1 \
-	    file://ppp_mppe.patch;patch=1 \
-	    file://nfs-blocksize.patch;patch=1 \
-	    file://pl2303.patch;patch=1 \
-	    file://linux-kernel-R25_to_R29.patch;patch=1 \
-	    ${UNSLUNG_KERNEL_EXTRA_SRC_URI}"
-
-FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/unslung-kernel', '${FILE_DIRNAME}/nslu2-linksys-kernel-2.4.22', '${FILE_DIRNAME}/files', '${FILE_DIRNAME}' ], d)}"
-
-python () {
-	# Don't build unslung kernel unless we're targeting an nslu2
-	mach = bb.data.getVar("MACHINE", d, 1)
-	dist = bb.data.getVar("DISTRO", d, 1)
-	if mach != 'nslu2' or dist != 'unslung':
-		raise bb.parse.SkipPackage("Unslung only builds for the Linksys NSLU2")
-}
diff --git a/packages/linux/unslung-kernel_2.4.22.l2.3r63.bb b/packages/linux/unslung-kernel_2.4.22.l2.3r63.bb
index b8d3c13a32..797d386f8c 100644
--- a/packages/linux/unslung-kernel_2.4.22.l2.3r63.bb
+++ b/packages/linux/unslung-kernel_2.4.22.l2.3r63.bb
@@ -12,9 +12,6 @@ CMDLINE_ROOT = "root=/dev/mtdblock4 rootfstype=jffs2 rw init=/linuxrc mem=32M@0x
 
 UNSLUNG_KERNEL_EXTRA_SRC_URI ?=
 
-#	    file://limit1gb.patch;patch=1 \
-#	    file://ext3flash-on-disk1.patch;patch=1 \
-
 SRC_URI += "file://linux-kernel-R25_to_R29.patch;patch=1 \
 	    file://linux-kernel-R29_to_R63.patch;patch=1 \
 	    file://flash-is-now-hdd.patch;patch=1 \
diff --git a/packages/nslu2-binary-only/nslu2-linksys-firmware_2.3r29.bb b/packages/nslu2-binary-only/nslu2-linksys-firmware_2.3r29.bb
deleted file mode 100644
index dbb4ad2502..0000000000
--- a/packages/nslu2-binary-only/nslu2-linksys-firmware_2.3r29.bb
+++ /dev/null
@@ -1,24 +0,0 @@
-SECTION = "base"
-DEPENDS = "slugimage-native unzip-native"
-PACKAGES = ""
-LICENSE = "GPL"
-INHIBIT_DEFAULT_DEPS = "1"
-PR = "r1"
-
-SRC_URI = "ftp://ftp.linksys.com/pub/network/NSLU2_V23R29.zip"
-S = "${WORKDIR}"
-
-python () {
-	# Don't build unless we're targeting an nslu2
-	if bb.data.getVar("MACHINE", d, 1) != "nslu2":
-		raise bb.parse.SkipPackage("NSLU2 firmware only builds for the Linksys NSLU2")
-}
-
-do_compile () {
-	slugimage -u -i NSLU2_V23R29.bin -b RedBoot -s SysConf -r ramdisk.ext2.gz -t Trailer
-	install -d ${STAGING_LIBDIR}/nslu2-binaries
-	install -m 0755 RedBoot ${STAGING_LIBDIR}/nslu2-binaries/
-	install -m 0755 SysConf ${STAGING_LIBDIR}/nslu2-binaries/
-	install -m 0755 ramdisk.ext2.gz ${STAGING_LIBDIR}/nslu2-binaries/
-	install -m 0755 Trailer ${STAGING_LIBDIR}/nslu2-binaries/
-}
diff --git a/packages/nslu2-binary-only/nslu2-linksys-libs_2.3r29.bb b/packages/nslu2-binary-only/nslu2-linksys-libs_2.3r29.bb
deleted file mode 100644
index f8348a615a..0000000000
--- a/packages/nslu2-binary-only/nslu2-linksys-libs_2.3r29.bb
+++ /dev/null
@@ -1,23 +0,0 @@
-DESCRIPTION = "Linksys NSLU2 Stock Firmware Libraries."
-PACKAGE_ARCH = "nslu2"
-SECTION = "base"
-PRIORITY = "required"
-PR = "r2"
-
-SRC_URI = "http://nslu.sf.net/downloads/nslu2-linksys-ramdisk-2.3r29.tar.bz2"
-
-S = "${WORKDIR}/nslu2-linksys-ramdisk-2.3r29"
-
-do_install () {
-	( cd ${S} ; rm -rf bin dev home mnt proc sbin share tmp upload usr var )
-	( cd ${S} ; tar cvf - . ) | ( cd ${D} ; tar xvf - )
-}
-
-PACKAGES = "${PN}"
-FILES_${PN} = "/lib"
-
-python () {
-	# Don't build unless we're targeting an nslu2
-	if bb.data.getVar("MACHINE", d, 1) != "nslu2":
-		raise bb.parse.SkipPackage("NSLU2 stock firmware libraries only builds for the Linksys NSLU2")
-}
diff --git a/packages/nslu2-binary-only/nslu2-linksys-ramdisk_2.3r29.bb b/packages/nslu2-binary-only/nslu2-linksys-ramdisk_2.3r29.bb
deleted file mode 100644
index c37c283706..0000000000
--- a/packages/nslu2-binary-only/nslu2-linksys-ramdisk_2.3r29.bb
+++ /dev/null
@@ -1,20 +0,0 @@
-DESCRIPTION = "Linksys NSLU2 Stock Firmware Ramdisk."
-PACKAGE_ARCH = "nslu2"
-SECTION = "base"
-PRIORITY = "required"
-PR = "r1"
-
-SRC_URI = "http://nslu.sf.net/downloads/nslu2-linksys-ramdisk-2.3r29.tar.bz2"
-
-do_install () {
-	( cd ${S} ; tar cvf - . ) | ( cd ${D} ; tar xvf - )
-}
-
-PACKAGES = "${PN}"
-FILES_${PN} = "/"
-
-python () {
-	# Don't build unless we're targeting an nslu2
-	if bb.data.getVar("MACHINE", d, 1) != "nslu2":
-		raise bb.parse.SkipPackage("NSLU2 ramdisk only builds for the Linksys NSLU2")
-}
diff --git a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/.mtn2git_empty b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/.mtn2git_empty
+++ /dev/null
diff --git a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES
deleted file mode 100644
index ae9d7c607c..0000000000
--- a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES
+++ /dev/null
@@ -1,489 +0,0 @@
-Unslung-6.x Family Release Notes
-
-Unslung is a replacement firmware image for the Linksys NSLU2 which is designed
-to allow you to make changes to the root filesystem (including the installation
-of downloadable packages) while still providing all the standard product
-functionality.
-
-If, at any time, you have any questions concerning the installation or
-operation of Unslung firmware, your first port of call should be the
-NSLU2-Linux wiki at:
-
-	http://www.nslu2-linux.org
-
-Specifically, check the HowTos and the Frequently Asked Questions before
-posting to the mailing list or asking a question in the IRC channel
-[#nslu2-general @ irc.freenode.net].
-
-OK! Now that that's out of the way...
-
-This file is provided to give general information and usage notes for the
-Unslung 6.x firmware.  If you are looking for installation instructions, please
-stop now and go to the README file.  Follow the README instructions WORD for
-WORD to keep from turning your NSLU2 into a brick.  The information contained
-in this file will make more sense if you have already "unslung" your NSLU2.
-
---------------------------------------------------------------------------------
-
-These "Notes" are divided into four sections:
-
-     1 - GENERAL INFORMATION
-     2 - IPKG PACKAGES
-     3 - DIVERSION SCRIPTS
-     4 - CHANGELOG
-
-
-GENERAL INFORMATION
-
-As stated above, Unslung firmware is a replacement firmware image for the
-Linksys NSLU2.  The Unslung firmware is intended to be used for loading new
-packages (giving enhanced or additional functionality) with minimal changes
-to the standard user interface and firmware.  The differences in the Unslung 6.x
-firmware from the standard Linksys 2.3R63 firmware can be found at:
-
-	http://www.nslu2-linux.org/wiki/Unslung/UnslungFeatures
-
-For more information about the Unslung firmware, including details on how to
-build it from source code yourself, look at:
-
-	http://www.nslu2-linux.org/wiki/Unslung
-
-There are several assumptions made in this Notes.  One, you've successfully
-unslung your NSLU2, and can verify the basic Linksys functionality (samba
-users, groups, and shares setup with the Linksys interface).  Two, that you can
-get telnet or ssh shell access to your NSLU2 from any computer on the same
-network as the NSLU2.  Three, that you have read and understand the NSLU2-linux
-community rules at:
-
-     http://www.nslu2-linux.org/wiki/Main/HomePage
-
-If you understand the third assumption, then you also understand that there is
-an emphasis on using and developing the NSLU2-Linux wiki.  Clarifications and
-further documentation is always welcomed on the wiki.
-
-If you are experienced with the Linux operating system, then you can make
-changes directly to the root filesystem - changes which are persistent across
-reboot.  If you want to get involved, then check the NSLU2-linux wiki at:
-
-     http://www.nslu2-linux.org/wiki/Main/HowToGetInvolved
-
-
-IPKG PACKAGES
-
-Packages require you to be running Unslung firmware (as you may have already
-guessed!)  In general, ipkg packages are commonly available software packages
-that have been ported to the NSLU2 - giving enhanced or additional
-functionality.  If you run into problems or have specific question with a
-certain package, you should look on the Internet for the general documentation
-about the package first.  If your problem is specific to the NSLU2 port, then
-check for further documentation for the corresponding package on the
-NSLU2-Linux wiki at:
-
-     http://www.nslu2-linux.org/wiki/Unslung/Packages
-
-When you "unsling" an external disk (check the README for instructions),
-downloaded packages will be installed onto that external disk.  The number of
-packages that you can install is only limited by the size of the "data"
-partition on the external disk.  Note that you *must* *not* install any
-packages before you have booted with an external "Unslung" disk.  To do so will
-almost certainly cause your internal jffs2 flash memory become full, and cause
-you to have to reflash your NSLU2.
-
-Package Installation Details
-
-     1) Check for network connectivity to the package repository from the NSLU2
-          first:  "ping ipkg.nslu2-linux.org"
-
-          - If this does not work, then please check the NSLU2 DNS settings in
-               the web interface (under "Administration", "LAN").
-
-     3) Update the list of available packages from new feeds:  "ipkg update"
-
-     4) Check the list of available packages for ones that you want on your
-          NSLU2:  "ipkg list"
-
-     5) Install the packages:  "ipkg install <package-name>"
-
-Most packages put their startup scripts into /opt/etc/init.d - which the
-Unslung firmware automatically runs at boot.  Some other packages are run from
-the cron or xinetd daemons.
-
-You can also check the ipkg command arguments simply by typing "ipkg" at the
-prompt.
-
-
-DIVERSION SCRIPTS
-
-Diversion scripts are used to start packages, set variables or function
-definitions at the time of the NSLU2 boot.  The diversion mechanism allows you
-to add to, or even replace the Linksys script functionality.  They "divert" the
-normal boot scripts to perform the needed action(s) and then can either "return
-1" to continue normal factory script progress or "return 0" to abort the
-diverted factory script.  The diversion of startup scripts is done at the
-lowest granularity, so you can just divert the rc.xinetd script and leave all
-others unchanged.  You are advised to use diversion scripts rather than editing
-system files directly (as this will allow you to upgrade the Unslung firmware
-in the future without having to make all of your changes again).
-
-     - Note:  If you do need to edit the system files directly, you can use the
-          "resling" script to save and load your modified system files.  See
-          the NSLU2-Linux wiki at:
-
-          http://www.nslu2-linux.org/wiki/Unslung/ReSling
-
-Diversion scripts go in the /unslung directory (you may have to create that
-directory first).  Note that after you have unslung to an external disk, then
-the diversion scripts will be stored on that external disk (along with the rest
-of the root filesystem).  This means that recovering from an incorrect
-diversion script is as simple as powering off, unplugging the disk, powering
-on, hot-plugging the disk (note that the diversion scripts will only run if the
-disk is attached at boot), and fix or remove the diversion script.
-
-You may divert as many or as few scripts as you like. Simply add the name of
-the standard rc script into the appropriate /unslung directory and it will be
-run.
-
-For example, I have a script /unslung/rc.local:
-
-#! /bin/sh
-/opt/bin/do_foo
-return 1
-
-That will run at the beginning of the normal /etc/rc.d/rc.local, and then
-the rest of the factory rc.local will be executed.  If I do NOT want to run
-the factory rc.local, my script would be:
-
-#!/bin/sh
-/opt/bin/do_foo
-return 0
-
-That is, if the diversion script returns with something other than 0, it will
-run the rest of the factory script.
-
-Note that any variable definitions or function declarations are allowed to
-happen before the diversion script is called.  This allows you to use the
-variables and functions defined by the factory script.
-
-Also not that telnet is not enabled by default - there is an openssh package
-and a dropbear package that either can replace telnet access with secure shell
-access.
-
-OpenSSH is the simplest to install:
-
-     - OpenSSH package details on NSLU2-Linux wiki at:
-          http://www.nslu2-linux.org/wiki/HowTo/UseOpenSSHForRemoteAccess
-
-Dropbear is preferred by some:
-
-     - Dropbear package details on NSLU2-Linux wiki at:
-          http://www.nslu2-linux.org/wiki/HowTo/UseDropBearForRemoteAccess
-
-The rationale behind not enabling telnet by default is ensure that an Unslung
-NSLU2 has the same network footprint as a stock NSLU2 with Linksys firmware.
-That said, if you want to enable telnet on boot, then install the xinetd
-package (which enables telnet by default).
-
-
-CHANGELOG
-
-1.11:
-
-First public release
-
-1.12:
-
-Added a symlink to slingbox for gzip.  Added flashfs (as simple utility for
-preserving user files across hard disk formats during beta testing).
-
-1.13:
-
-Added LD_LIBRARY_PATH to /etc/profile (only works for telnet and ssh access,
-not for serial or diversion scripts).
-
-1.14:
-
-Added Unslung Doc link to the User Guide page.
-
-2.3:
-
-Moved development to OpenEmbedded.
-
-2.4:
-
-Updated to the latest ipk binary instead of the simple script.
-
-2.5:
-
-Added the real wget (instead of using the busybox version).  This is so we can
-support .netrc files for commercial packages.
-
-2.6:
-
-Fixed the unsling script so it removes conflicting files on an upgrade.
-
-2.7:
-
-Began development of the -able variant.
-
-2.8:
-
-Added the patch for genesys enclosures.
-
-2.9:
-
-Reorganized the various variants into a more consistent scheme.
-
-2.10:
-
-Added the ext3flash-on-disk1 functionality.
-
-2.11:
-
-Added the README to /opt/doc.
-
-2.12:
-
-First public release of 2.x firmware.
-
-3.1:
-
-Added jffs2 functionality.
-
-3.2:
-
-Incorporated switchbox functionality.
-
-3.3:
-
-Added ramdisks for /dev and /var to reduce internal flash writes.
-
-3.4:
-
-Replaced flashfs script with new resling script.
-
-3.5:
-
-Added code to reinitialize /etc/mtab on boot.
-
-3.6:
-
-Mounted /dev and /var jffs2 directories as /dev.state and /var.state so that
-they can be used for persistent changes which are used to populate the ramdisks
-on the next boot.
-
-3.7:
-
-Added "Pluggable Personalities" - now runs diversion scripts from both the
-internal jffs2 area and also from an external drive attached at boot time.
-
-3.8:
-
-Enabled mounting of external drives earlier in the boot process, so that the
-rc, rc.sysinit, and rc.1 scripts can be diverted by external diversion scripts
-on an attached drive.
-
-3.9:
-
-Moved a number of -able kernel features (such as USB devfs support) into
--standard.
-
-3.10:
-
-Added support for unslung-start and unslung-stop diversion scripts, and package
-shutdown scripts (K??foo).
-
-3.11:
-
-Added NFS kernel support (both client and server, and both V2 and V3
-protocols).
-
-3.12:
-
-Added basic maintenance mode support.  If /.ramdisk exists in the jffs2
-filesystem, then the jffs2 filesystem is copied into a ramdisk on boot, and run
-from there.  This allows for updating firmware using the web interface.
-
-3.13:
-
-Added recovery mode support.  If a viable root filesystem cannot be found, then
-switchbox drops into a basic recovery shell, with a telnet daemon running as
-192.168.1.77 with no password.  This behavior can also be forced with a
-/.recovery file in the jffs2 filesystem.
-
-3.14:
-
-Added web control of maintenance mode.  You have to enable maintenance mode and
-reboot before the firmware upgrade page allows you to enter a filename for the
-new firmware.
-
-3.15:
-
-Added confirmation dialog boxes to the maintenance mode web control.
-
-3.16:
-
-First public release of 3.x firmware.
-
-3.17:
-
-Fixed syslog issue.  Added FP patches.
-
-3.18:
-
-Fixed a number of minor issues regarding file permissions.
-Added support for unslinging to the data partition.
-
-4.1:
-
-Split from 3.x stream to allow parallel development.
-
-4.2:
-
-New switchbox implementation with NFS and external USB disk root filesystem
-support.
-
-4.3:
-
-Enabled devfs.
-
-4.4:
-
-Changed slingbox program locations to match those of OpenSlug so that
-we can use the same switchbox for both.
-
-4.5:
-
-Enabled RAID support modules and USB camera support modules.
-
-4.6:
-
-Merged unslung-standard and unslung-able, and created the oe feed for
-downloadable kernel modules. Updated the unsling script to support
-external rootfs.
-
-4.7:
-
-Enabled lots of traffic shaping modules.  Enabled support for external
-disks on sda1, sda2, sdb1 and sdb2.
-
-4.8:
-
-Made Unslung *not* create ramdisk for /var and /dev when you've
-unslung to an external disk.  Fixed nsswitch.conf.  Updated the feed
-locations.  Added /dev/st devices for tape drive support.
-
-4.9:
-
-Updated the unslung script to give feedback on the rootfs transfer,
-and to preserve an existing upkg database on the target disk.  Added
-more device nodes to support the new downloadable kernel modules.
-
-4.10:
-
-Made Unslung wait until quota checking is complete before running
-package startup scripts.  Simplified unsling to support disk1 and
-disk2 (data partitions) only.
-
-4.11:
-
-Removed /tmp ramdisk if unslung to an external disk.  Now clears /tmp
-and /mnt/backup on each boot.
-
-4.12:
-
-Updated to the latest ipkg version.
-
-4.13:
-
-Added /dev/sdd and /dev/sde device nodes.
-Added support for alternate rootfs under expert user control.
-
-4.14:
-
-Added audio support to the kernel.  Increased the USB disk startup
-wait to 10 seconds, and added the ability to divert rc.bootbin to the
-startup scripts.
-
-4.15:
-
-Added /dev/dsp and updated the README and NOTES files.
-
-4.16:
-
-Added the /sbin/slingover script for migrating packages from the 3.x locations.
-
-4.17:
-
-Developer-only release booting straight from jffs2 instead of using switchbox.
-
-4.18:
-
-A number of /linuxrc fixes.  Removed support for alternate rootfs under expert
-user control (expert users can now just edit the /linuxrc in jffs2 directly).
-
-4.19:
-
-Removed all trace of switchbox from the firmware.  This saves 128Kb of flash,
-and about 1MB of RAM.
-
-4.20:
-
-First public release of 4.x firmware.
-
-5.1:
-
-Upgraded to Linksys firmware V2.3R29, but kept telnetd.
-
-5.2:
-
-Removed the ipkg link, and made unsling put it back on an external disk.
-
-5.3:
-
-Replaced maintenance mode with code to allow entry into RedBoot Upgrade Mode.
-
-5.4:
-
-Removed all maintenance mode support, and also removed support for rootfs on
-jffs2 but packages on external disk (it's either all or nothing).
-Removed unused /mnt/sda1, /mnt/sda2, /mnt/sdb1, and /mnt/sdb2.
-Disabled the download process (superceded by upgrade mode).
-Disabled the generation of the "ourtelnetrescue" user (too insecure).
-Added disk auto-wait countdown to /linuxrc (courtesy of glc).
-
-5.5:
-
-First public release of 5.x firmware.
-
-6.0:
-
-First alpha release of 6.x Unslung firmware, based on Linksys V2.3R63 firmware.
-
-6.5:
-
-Unsling script now prompts for a root password to be used, additional sanity
-checks added to minimize the chance of an improper unsling.  User feedback
-added to indicate the status (running from internal flash or booted up from
-an external drive) via /etc/motd, ipkg, as well as the main web page.  Improved
-diagnostic messages from unsling.  Added the Linksys custom code to the "mount"
-code in the slingbox version of mount.
-
-6.6:
-
-Changed the code that handles the ".ext3flash" functionality so that it can
-handle booting from either /dev/sda or /dev/sdb.
-Cleanup of the "telnet.htm" management page.
-Unsling now creates the wmtp and utmp files.
-Unsling now "edits" the .../conf/passwd file ins