add machine mtcdp

2 files changed, 118 insertions, 0 deletions

diff --git a/conf/machine/mtcdp.conf b/conf/machine/mtcdp.conf
new file mode 100644
index 0000000000..fd03fd2ae1
--- /dev/null
+++ b/conf/machine/mtcdp.conf
@@ -0,0 +1,27 @@
+#@TYPE: Machine
+#@Name: Multi-Tech MTCDP
+#@DESCRIPTION: Machine configuration for the MTCDP (Cellular Development Platform)
+
+TARGET_ARCH = "arm"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "2.6.28"
+
+KERNEL_IMAGETYPE = "uImage"
+UBOOT_MACHINE = "at91sam9g20ek_nandflash_config"
+
+PREFERRED_VERSION_at91bootstrap = "2.13"
+PREFERRED_VERSION_u-boot = "1.3.4"
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = "kernel26 ext2 usbhost usbgadget"
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+
+require conf/machine/include/tune-arm926ejs.inc
diff --git a/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp/defconfig b/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp/defconfig
new file mode 100644
index 0000000000..8338b3d98c
--- /dev/null
+++ b/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp/defconfig
@@ -0,0 +1,91 @@
+#
+# Automatically generated make config: don't edit
+# Tue Jan 12 22:00:36 2010
+#
+HAVE_DOT_CONFIG=y
+CONFIG_BOARDNAME="at91sam9g20nf"
+# CONFIG_AT91SAM9260EK is not set
+# CONFIG_AT91SAM9261EK is not set
+# CONFIG_AT91SAM9263EK is not set
+# CONFIG_AT91SAM9RLEK is not set
+# CONFIG_AT91SAM9XEEK is not set
+# CONFIG_AT91SAM9G10EK is not set
+CONFIG_AT91SAM9G20EK=y
+# CONFIG_AT91SAM9G45EK is not set
+# CONFIG_AT91SAM9G45EKES is not set
+# CONFIG_AT91SAM9M10EK is not set
+# CONFIG_AT91CAP9ADK is not set
+# CONFIG_AT91CAP9STK is not set
+# CONFIG_AFEB9260 is not set
+CONFIG_CHIP="AT91SAM9G20"
+CONFIG_BOARD="at91sam9g20ek"
+CONFIG_MACH_TYPE="0x658"
+CONFIG_LINK_ADDR="0x000000"
+CONFIG_TOP_OF_MEMORY="0x301000"
+CONFIG_BOOTSTRAP_MAXSIZE="13000"
+# CONFIG_CRYSTAL_12_000MHZ is not set
+# CONFIG_CRYSTAL_16_000MHZ is not set
+# CONFIG_CRYSTAL_16_36766MHZ is not set
+CONFIG_CRYSTAL_18_432MHZ=y
+ALLOW_CRYSTAL_18_432MHZ=y
+CONFIG_CRYSTAL="CRYSTAL_18_432MHZ"
+# CONFIG_CPU_CLK_166MHZ is not set
+# CONFIG_CPU_CLK_180MHZ is not set
+# CONFIG_CPU_CLK_200MHZ is not set
+# CONFIG_CPU_CLK_240MHZ is not set
+# CONFIG_CPU_CLK_266MHZ is not set
+CONFIG_CPU_CLK_400MHZ=y
+ALLOW_CPU_CLK_400MHZ=y
+# DISABLE_CPU_CLK_240MHZ is not set
+# CONFIG_BUS_SPEED_83MHZ is not set
+# CONFIG_BUS_SPEED_90MHZ is not set
+# CONFIG_BUS_SPEED_100MHZ is not set
+CONFIG_BUS_SPEED_133MHZ=y
+
+#
+# Memory selection
+#
+CONFIG_SDRAM=y
+# CONFIG_SDDRC is not set
+# CONFIG_DDR2 is not set
+ALLOW_DATAFLASH=y
+# ALLOW_FLASH is not set
+ALLOW_NANDFLASH=y
+# ALLOW_SDCARD is not set
+# ALLOW_PSRAM is not set
+# ALLOW_SDRAM_16BIT is not set
+# CONFIG_RAM_32MB is not set
+CONFIG_RAM_64MB=y
+# CONFIG_RAM_128MB is not set
+# CONFIG_RAM_256MB is not set
+# CONFIG_DATAFLASH is not set
+# CONFIG_FLASH is not set
+CONFIG_NANDFLASH=y
+# CONFIG_SDCARD is not set
+CONFIG_MEMORY="nandflash"
+ALLOW_DATAFLASH_RECOVERY=y
+ALLOW_BOOT_FROM_DATAFLASH_CS0=y
+ALLOW_BOOT_FROM_DATAFLASH_CS1=y
+DATAFLASHCARD_ON_CS0=y
+
+#
+# NAND Flash configuration
+#
+# CONFIG_NANDFLASH_SMALL_BLOCKS is not set
+CONFIG_PROJECT="nandflash"
+CONFIG_LOAD_UBOOT=y
+# CONFIG_LOAD_64KB is not set
+# CONFIG_LOAD_1MB is not set
+# CONFIG_LOAD_4MB is not set
+CONFIG_IMG_ADDRESS="0x00020000"
+CONFIG_IMG_SIZE="0x00040000"
+CONFIG_JUMP_ADDR="0x23F00000"
+CONFIG_APP_CHECK=y
+# CONFIG_LONG_TEST is not set
+CONFIG_DEBUG=y
+CONFIG_VERBOSE=y
+CONFIG_HW_INIT=y
+# CONFIG_USER_HW_INIT is not set
+# CONFIG_THUMB is not set
+CONFIG_SX_AT91=y
+CONFIG_RAW_AT91=y