path: root/io-module/mtr.c

static struct gpio_pin gpio_pins_mtr_0_0[] = {
	{
		.name = "ETH_EN",
		.pin = {
			.gpio = AT91_PIN_PC6,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "eth-enabled",
		},
		.active_low = 0,
	},
	{
		.name = "RADIO_POWER_MONITOR",
		.pin = {
			.gpio = AT91_PIN_PA23,
			.flags = GPIOF_IN,
			.label = "radio-power-monitor",
		},
		.active_low = 0,
	},
	{
		.name = "RADIO_RESET",
		.pin = {
			.gpio = AT91_PIN_PA22,
			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
			.label = "radio-reset",
		},
		.active_low = 0,
	},
	{
		.name = "RADIO_POWER",
		.pin = {
			.gpio = AT91_PIN_PA21,
			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
			.label = "radio-power",
		},
		.active_low = 0,
	},
	{
		.name = "DEVICE_RESET",
		.pin = {
			.gpio = AT91_PIN_PC4,
			.flags = GPIOF_IN,
			.label = "reset",
		},
		.active_low = 1,
	},
	{
		.name = "LS_LED",
		.pin = {
			.gpio = AT91_PIN_PC16,
#if LED_LS_CONTROLLABLE
			.flags = GPIOF_OUT_INIT_HIGH,
#else
			.flags = GPIOF_IN,
#endif
			.label = "led-ls",
		},
		.active_low = 1,
	},
	{
		.name = "STATUS_LED",
		.pin = {
			.gpio = AT91_PIN_PC21,
			.flags = GPIOF_OUT_INIT_LOW,
			.label = "led-status",
		},
		.active_low = 1,
	},
	{
		.name = "LED3",
		.pin = {
			.gpio = AT91_PIN_PC15,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-wifi",
		},
		.active_low = 1,
	},
	{
		.name = "LED3",
		.pin = {
			.gpio = AT91_PIN_PC15,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-b",
		},
		.active_low = 1,
	},
	{
		.name = "LED4",
		.pin = {
			.gpio = AT91_PIN_PC20,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-cd",
		},
		.active_low = 1,
	},
	{
		.name = "LED4",
		.pin = {
			.gpio = AT91_PIN_PC20,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-c",
		},
		.active_low = 1,
	},
	{
		.name = "LED6",
		.pin = {
			.gpio = AT91_PIN_PC19,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-sig1",
		},
		.active_low = 1,
	},
	{
		.name = "LED6",
		.pin = {
			.gpio = AT91_PIN_PC19,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-d",
		},
		.active_low = 1,
	},
	{
		.name = "LED7",
		.pin = {
			.gpio = AT91_PIN_PC18,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-sig2",
		},
		.active_low = 1,
	},
	{
		.name = "LED7",
		.pin = {
			.gpio = AT91_PIN_PC18,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-e",
		},
		.active_low = 1,
	},
	{
		.name = "LED8",
		.pin = {
			.gpio = AT91_PIN_PC17,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-sig3",
		},
		.active_low = 1,
	},
	{
		.name = "LED8",
		.pin = {
			.gpio = AT91_PIN_PC17,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-f",
		},
		.active_low = 1,
	},
	{
		.name = "RI_B",
		.pin = {
			.gpio = AT91_PIN_PC25,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "extserial-ri",
		},
		.active_low = 1,
	},
	{
		.name = "DTR_B",
		.pin = {
			.gpio = AT91_PIN_PC26,
			.flags = GPIOF_IN,
			.label = "extserial-dtr",
		},
		.active_low = 1,
	},
	{
		.name = "DSR_B",
		.pin = {
			.gpio = AT91_PIN_PC27,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "extserial-dsr",
		},
		.active_low = 1,
	},
	{
		.name = "DCD_B",
		.pin = {
			.gpio = AT91_PIN_PC28,
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "extserial-dcd",
		},
		.active_low = 1,
	},
	{
		.name = "BT_EN",
		.pin = {
			.gpio = AT91_PIN_PA28,
			.flags = GPIOF_OUT_INIT_LOW,
			.label = "bt-enabled",
		},
		.active_low =