diff options
Diffstat (limited to 'io-module/machine/mths.c')
| -rw-r--r-- | io-module/machine/mths.c | 883 |
1 files changed, 883 insertions, 0 deletions
diff --git a/io-module/machine/mths.c b/io-module/machine/mths.c new file mode 100644 index 0000000..c19598d --- /dev/null +++ b/io-module/machine/mths.c @@ -0,0 +1,883 @@ +/* + * mths.c + * + * Created on: Apr 26, 2018 + * Author: leonid + */ +#include "at91gpio.h" +#include "buttons.h" + +static struct gpio_pin gpio_pins_mths_0_0[] = { + { + .name = "RADIO_POWER_MONITOR", + .pin = { + .gpio = AT91_PIN_PA23, + .flags = GPIOF_IN, + .label = "radio-power-monitor", + }, + .active_low = 0, + }, + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PA22, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-reset", + }, + .active_low = 0, + }, + { + .name = "RADIO_POWER", + .pin = { + .gpio = AT91_PIN_PA21, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-power", + }, + .active_low = 0, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "WPS_BUTTON", + .pin = { + .gpio = AT91_PIN_PA13, + .flags = GPIOF_IN, + .label = "wps_button", + }, + .active_low = 1, + }, + { + .name = "BT_BUTTON", + .pin = { + //TODO return back .gpio = AT91_PIN_PC4, + .gpio = AT91_PIN_PA12, + .flags = GPIOF_IN, + .label = "bt_button", + }, + .active_low = 1, + }, + { + .name = "LS_LED", + .pin = { + .gpio = AT91_PIN_PC16, +#if LED_LS_CONTROLLABLE + .flags = GPIOF_OUT_INIT_HIGH, +#else + .flags = GPIOF_IN, +#endif + .label = "led-ls", + }, + .active_low = 1, + }, + { + .name = "LED3", + .pin = { + .gpio = AT91_PIN_PC15, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-wifi", + }, + .active_low = 1, + }, + { + .name = "LED3", + .pin = { + .gpio = AT91_PIN_PC15, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-b", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-bt", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-c", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-status", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-cd", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig3", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-d", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig2", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-e", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig1", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-f", + }, + .active_low = 1, + }, + + // The difference between MTRv1_0_0 and MTRv1_0_1 starts here + { + .name = "WIFI_BT_ULPWKUP", + .pin = { + .gpio = AT91_PIN_PB9, + .flags = GPIOF_IN, + .label = "wifi-bt-ulpwkup", + } + }, + { + .name = "WIFI_BT_LPWKUP", + .pin = { + .gpio = AT91_PIN_PB11, + .flags = GPIOF_IN, + .label = "wifi-bt-lpwkup", + } + }, + { + .name = "WIFI_BT_INT", + .pin = { + .gpio = AT91_PIN_PB13, + .flags = GPIOF_IN, + .label = "wifi-bt-int", + } + }, + { + .name = "WIFI_BT_RESET", + .pin = { + .gpio = AT91_PIN_PB10, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "wifi-bt-reset", + } + }, + { + .name = "WIFI_BT_LPMODE", + .pin = { + .gpio = AT91_PIN_PB12, + .flags = GPIOF_IN, + .label = "wifi-bt-lpmode", + } + }, + { + .name = "GNSS_RESET", + .pin = { + .gpio = AT91_PIN_PC6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "gnss-reset", + } + }, + { + .name = "USBHUB_RESET", + .pin = { + .gpio = AT91_PIN_PB6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "usbhub-reset", + } + }, + { + .name = "GNSS_INT", + .pin = { + .gpio = AT91_PIN_PC7, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-int", + } + }, + + + { }, +}; + +/* MTHS-0.1 has no WIFI LED */ +static struct gpio_pin gpio_pins_mths_0_1[] = { + { + .name = "RADIO_POWER_MONITOR", + .pin = { + .gpio = AT91_PIN_PA23, + .flags = GPIOF_IN, + .label = "radio-power-monitor", + }, + .active_low = 0, + }, + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PA22, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-reset", + }, + .active_low = 0, + }, + { + .name = "RADIO_POWER", + .pin = { + .gpio = AT91_PIN_PA21, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-power", + }, + .active_low = 0, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "WPS_BUTTON", + .pin = { + .gpio = AT91_PIN_PA13, + .flags = GPIOF_IN, + .label = "wps_button", + }, + .active_low = 1, + }, + { + .name = "BT_BUTTON", + .pin = { + //TODO return back .gpio = AT91_PIN_PC4, + .gpio = AT91_PIN_PA12, + .flags = GPIOF_IN, + .label = "bt_button", + }, + .active_low = 1, + }, + { + .name = "LS_LED", + .pin = { + .gpio = AT91_PIN_PC16, +#if LED_LS_CONTROLLABLE + .flags = GPIOF_OUT_INIT_HIGH, +#else + .flags = GPIOF_IN, +#endif + .label = "led-ls", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-bt", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-c", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-status", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-cd", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig3", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-d", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig2", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-e", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig1", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-f", + }, + .active_low = 1, + }, + + // The difference between MTRv1_0_0 and MTRv1_0_1 starts here + { + .name = "WIFI_BT_ULPWKUP", + .pin = { + .gpio = AT91_PIN_PB9, + .flags = GPIOF_IN, + .label = "wifi-bt-ulpwkup", + } + }, + { + .name = "WIFI_BT_LPWKUP", + .pin = { + .gpio = AT91_PIN_PB11, + .flags = GPIOF_IN, + .label = "wifi-bt-lpwkup", + } + }, + { + .name = "WIFI_BT_INT", + .pin = { + .gpio = AT91_PIN_PB13, + .flags = GPIOF_IN, + .label = "wifi-bt-int", + } + }, + { + .name = "WIFI_BT_RESET", + .pin = { + .gpio = AT91_PIN_PB10, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "wifi-bt-reset", + } + }, + { + .name = "WIFI_BT_LPMODE", + .pin = { + .gpio = AT91_PIN_PB12, + .flags = GPIOF_IN, + .label = "wifi-bt-lpmode", + } + }, + { + .name = "GNSS_RESET", + .pin = { + .gpio = AT91_PIN_PC6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "gnss-reset", + } + }, + { + .name = "USBHUB_RESET", + .pin = { + .gpio = AT91_PIN_PB6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "usbhub-reset", + } + }, + { + .name = "GNSS_INT", + .pin = { + .gpio = AT91_PIN_PC7, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-int", + } + }, + + + { }, +}; + +button_info_t mths_wps_button = { + .name = "User Push Button WPS", + .label_pin = "wps_button", + .label_monitor = "wps_button-monitor", + .label_monitor_intervals = "wps_button-monitor-intervals", + + /* Signals */ + .short_signal = SIGUSR1, + .long_signal = SIGUSR2, + .short_signal = SIGHUP, + + /* Intervals */ + .short_interval = BUTTON_HOLD_COUNT, + .long_interval = BUTTON_LONG_HOLD_COUNT, +}; + +button_info_t mths_bt_button = { + .name = "User Push Button BT", + .label_pin = "bt_button", + .label_monitor = "bt_button-monitor", + .label_monitor_intervals = "bt_button-monitor-intervals", + + /* Signals */ + .short_signal = SIGUSR1, + .long_signal = SIGUSR2, + .short_signal = SIGHUP, + + /* Intervals */ + .short_interval = BUTTON_HOLD_COUNT, + .long_interval = BUTTON_LONG_HOLD_COUNT, +}; + +/* MTHS 0.0 and 0.1 have same buttons. */ +static button_info_pt mths_buttons_0_0[] = { + &reset_button, + &mths_wps_button, + &mths_bt_button, + NULL, +}; + +static DEVICE_ATTR_MTS(dev_attr_wps_button_monitor_intervals_mths, + mths_wps_button.label_monitor_intervals, + mts_attr_show_button_monitor_intervals, + mts_attr_store_button_monitor_intervals); + +static DEVICE_ATTR_MTS(dev_attr_wps_button_monitor_mths, + mths_wps_button.label_monitor, + mts_attr_show_button_monitor, + mts_attr_store_button_monitor); + +static DEVICE_ATTR_RO_MTS(dev_attr_wps_button_pin_mths, + mths_wps_button.label_pin, + mts_attr_show_gpio_pin); + + +static DEVICE_ATTR_MTS(dev_attr_bt_button_monitor_intervals_mths, + mths_bt_button.label_monitor_intervals, + mts_attr_show_button_monitor_intervals, + mts_attr_store_button_monitor_intervals); + +static DEVICE_ATTR_MTS(dev_attr_bt_button_monitor_mths, + mths_bt_button.label_monitor, + mts_attr_show_button_monitor, + mts_attr_store_button_monitor); + +static DEVICE_ATTR_RO_MTS(dev_attr_bt_button_pin_mths, + mths_bt_button.label_pin, + mts_attr_show_gpio_pin); + + +/* radio control (power/reset) for mtr */ +static int radio_off_mths(void) +{ + int value; + struct gpio_pin *pwrmon_pin = gpio_pin_by_attr_name("radio-power-monitor"); + struct gpio_pin *onoff_pin = gpio_pin_by_attr_name("radio-power"); + struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset"); + + if (!onoff_pin || !pwrmon_pin || !rst_pin) { + return -ENODEV; + } + + value = gpio_get_value(pwrmon_pin->pin.gpio); + if(value == 0) { + log_error("radio is already off"); + return -EINVAL; + } + + // drive on/off pin low for at least 3 sec + log_info("shutting down radio"); + gpio_set_value(onoff_pin->pin.gpio, 0); + + msleep(3500); + + // set on/off pin high + gpio_set_value(onoff_pin->pin.gpio, 1); + + msleep(200); + + // check that power is low + value = gpio_get_value(pwrmon_pin->pin.gpio); + if(value != 0) { + log_warning("radio is still on. performing radio reset."); + //Perform Hard Reset + gpio_set_value(rst_pin->pin.gpio, 0); + + msleep(500); + + // set pin high + gpio_set_value(rst_pin->pin.gpio, 1); + } else { + log_info("radio has been shut down"); + } + + return 0; +} + +static int radio_on_mths(void) +{ + int value; + struct gpio_pin *pwrmon_pin = gpio_pin_by_attr_name("radio-power-monitor"); + struct gpio_pin *onoff_pin = gpio_pin_by_attr_name("radio-power"); + struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset"); + + if (!onoff_pin || !pwrmon_pin || !rst_pin) { + return -ENODEV; + } + + value = gpio_get_value(pwrmon_pin->pin.gpio); + if(value != 0) { + log_error("radio is already on"); + return -EINVAL; + } + + // drive on/off pin low for at least 5 sec + log_info("turning on radio"); + gpio_set_value(onoff_pin->pin.gpio, 0); + + // ref:Telit_LE910_V2_Hardware_User_Guide_r9.pdf + // pg 32: When USB is connected or after firmware updating, + // delay must be equal at least to 10 seconds. + msleep(10500); + + // set on/off pin high + gpio_set_value(onoff_pin->pin.gpio, 1); + log_info("radio_on_mths: radio should be coming up"); + + msleep(200); + + // check that power is high + value = gpio_get_value(pwrmon_pin->pin.gpio); + if(value == 0) { + log_warning("radio_on_mths: radio is still off. performing radio reset"); + //Perform Hard Reset + gpio_set_value(rst_pin->pin.gpio, 0); + + msleep(500); + + // set pin high + gpio_set_value(rst_pin->pin.gpio, 1); + } else { + log_info("radio has been turned on"); + } + + return 0; +} + +static int radio_reset_mths(void) +{ + struct gpio_pin *onoff_pin = gpio_pin_by_attr_name("radio-power"); + struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset"); + + if (!rst_pin || !onoff_pin) { + return -ENODEV; + } + + // drive reset pin low for 500ms + gpio_set_value(rst_pin->pin.gpio, 0); + + msleep(500); + + // set pin high + gpio_set_value(rst_pin->pin.gpio, 1); + + // wait for 2 sec before toggling on/off pin + msleep(2000); + + // drive on/off pin low for 10.5 sec + gpio_set_value(onoff_pin->pin.gpio, 0); + + log_info("Wait 10.5 seconds for on/off pin"); + msleep(10500); + + log_info("Done with wait 10.5 seconds for on/off pin"); + // set on/off pin high + gpio_set_value(onoff_pin->pin.gpio, 1); + msleep(200); // Delay for status pin to switch + return 0; +} + +static ssize_t mts_attr_store_radio_power_mths(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int value; + int err; + + if (sscanf(buf, "%i", &value) != 1) { + return -EINVAL; + } + if (value == 0) { + mutex_lock(&mts_io_mutex); + err = radio_off_mths(); + mutex_unlock(&mts_io_mutex); + } else { + mutex_lock(&mts_io_mutex); + err = radio_on_mths(); + mutex_unlock(&mts_io_mutex); + } + + if (err) { + return err; + } + + return count; +} + +static ssize_t mts_attr_store_radio_reset_mths(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int value; /* 0 = normal reset; -1 = forced reset */ + int err; + + if (sscanf(buf, "%i", &value) != 1) { + return -EINVAL; + } + if (value != 0 && value != -1) { + return -EINVAL; + } + + /* check reset timings is enabled */ + if (value != -1 && NULL != timings_data) { + /* check reset timer is started */ + if (radio_reset_timer_is_start == 1) { + log_info("radio reset timer is running. \n"); + return count; + } + + /* check reset timer available is started */ + if (radio_reset_available_timer_is_start == 1) { + del_timer(&radio_reset_available_timer); + radio_reset_available_timer_is_start = 0; + } + + /* reset timer not started, start it */ + mod_timer(&radio_reset_timer, jiffies + msecs_to_jiffies((timings_data[timings_data_index]) * 1000)); + //log_info("radio reset timer is start = [%d]\n", time_now_secs()); + /* save timings_data_stop_seconds */ + timings_data_stop_seconds = timings_data[timings_data_index] + time_now_secs(); + radio_reset_timer_is_start = 1; + } + + log_info("radio is reset\n"); + + mutex_lock(&mts_io_mutex); + + err = radio_reset_mths(); + + mutex_unlock(&mts_io_mutex); + + if (err) { + return err; + } + + return count; +} + +static ssize_t mts_attr_show_radio_power_mths(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int value; + struct gpio_pin *pwrmon_pin = gpio_pin_by_attr_name("radio-power-monitor"); + + if ( !pwrmon_pin ) { + return -ENODEV; + } + + value = gpio_get_value(pwrmon_pin->pin.gpio); + return sprintf(buf, "%d\n", value); +} + +static DEVICE_ATTR_MTS(dev_attr_radio_power_mths, "radio-power", + mts_attr_show_radio_power_mths, mts_attr_store_radio_power_mths); + +static DEVICE_ATTR_MTS(dev_attr_radio_reset_mths, "radio-reset", + mts_attr_show_gpio_pin, mts_attr_store_radio_reset_mths); + + +static DEVICE_ATTR_MTS(dev_attr_led_wifi_gpio_mths, "led-wifi", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_led_bt_gpio_mths, "led-bt", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_led_f_gpio_mths, "led-f", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_RO_MTS(dev_attr_wifi_mac_mths, "mac-wifi", + mts_attr_show_product_info); + +static DEVICE_ATTR_RO_MTS(dev_attr_bluetooth_mac_mths, "mac-bluetooth", + mts_attr_show_product_info); + +static DEVICE_ATTR_MTS(dev_attr_wifi_bt_lpwkup_mths, "wifi-bt-lpwkup", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_wifi_bt_ulpwkup_mths, "wifi-bt-ulpwkup", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_wifi_bt_reset_mths, "wifi-bt-reset", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_lpmode_mths, "wifi-bt-lpmode", + mts_attr_show_gpio_pin); + +static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_int_mths, "wifi-bt-int", + mts_attr_show_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_gnss_reset_mths, "gnss-reset", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_usbhub_reset_mths, "usbhub-reset", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_RO_MTS(dev_attr_gnss_int_mths, "gnss-int", + mts_attr_show_gpio_pin); + + + +static struct attribute *mths_0_0_platform_attributes[] = { + &dev_attr_vendor_id.attr, + &dev_attr_product_id.attr, + &dev_attr_device_id.attr, + &dev_attr_uuid.attr, + &dev_attr_hw_version.attr, + &dev_attr_imei.attr, + &dev_attr_wifi_mac_mths.attr, + &dev_attr_bluetooth_mac_mths.attr, + &dev_attr_has_radio.attr, + + &dev_attr_reset.attr, + &dev_attr_reset_monitor.attr, + &dev_attr_reset_monitor_intervals.attr, + &dev_attr_wps_button_pin_mths.attr, + &dev_attr_wps_button_monitor_mths.attr, + &dev_attr_wps_button_monitor_intervals_mths.attr, + &dev_attr_bt_button_pin_mths.attr, + &dev_attr_bt_button_monitor_mths.attr, + &dev_attr_bt_button_monitor_intervals_mths.attr, + + &dev_attr_radio_power_mths.attr, + &dev_attr_radio_reset_mths.attr, + + &dev_attr_radio_reset_backoffs.attr, + &dev_attr_radio_reset_backoff_index.attr, + &dev_attr_radio_reset_backoff_seconds.attr, + + &dev_attr_wifi_bt_lpwkup_mths.attr, + &dev_attr_wifi_bt_ulpwkup_mths.attr, + &dev_attr_wifi_bt_reset_mths.attr, + &dev_attr_wifi_bt_lpmode_mths.attr, + &dev_attr_wifi_bt_int_mths.attr, + &dev_attr_gnss_reset_mths.attr, + &dev_attr_usbhub_reset_mths.attr, + &dev_attr_gnss_int_mths.attr, + + &dev_attr_led_status.attr, + &dev_attr_led_cd_gpio.attr, + &dev_attr_led_sig1_gpio.attr, + &dev_attr_led_sig2_gpio.attr, + &dev_attr_led_sig3_gpio.attr, + &dev_attr_led_wifi_gpio_mths.attr, + &dev_attr_led_bt_gpio_mths.attr, + + &dev_attr_led_b_gpio.attr, + &dev_attr_led_c_gpio.attr, + &dev_attr_led_d_gpio.attr, + &dev_attr_led_e_gpio.attr, + &dev_attr_led_f_gpio_mths.attr, + + NULL, +}; + +static struct attribute_group mths_0_0_platform_attribute_group = { + .attrs = mths_0_0_platform_attributes +}; |